diff options
| -rw-r--r-- | core/Makefile.inc | 2 | ||||
| -rw-r--r-- | core/psr.c | 42 | ||||
| -rw-r--r-- | doc/device-tree/ibm,opal/power-mgt/psr.rst | 53 | ||||
| -rw-r--r-- | doc/opal-api/opal-power-shift-ratio.rst | 79 | ||||
| -rw-r--r-- | hw/occ.c | 95 | ||||
| -rw-r--r-- | include/opal-api.h | 4 | ||||
| -rw-r--r-- | include/psr.h | 46 |
7 files changed, 319 insertions, 2 deletions
diff --git a/core/Makefile.inc b/core/Makefile.inc index b3c9e911..f2de2f64 100644 --- a/core/Makefile.inc +++ b/core/Makefile.inc @@ -8,7 +8,7 @@ CORE_OBJS += pci-opal.o fast-reboot.o device.o exceptions.o trace.o affinity.o CORE_OBJS += vpd.o hostservices.o platform.o nvram.o nvram-format.o hmi.o CORE_OBJS += console-log.o ipmi.o time-utils.o pel.o pool.o errorlog.o CORE_OBJS += timer.o i2c.o rtc.o flash.o sensor.o ipmi-opal.o -CORE_OBJS += flash-subpartition.o bitmap.o buddy.o pci-quirk.o powercap.o +CORE_OBJS += flash-subpartition.o bitmap.o buddy.o pci-quirk.o powercap.o psr.o ifeq ($(SKIBOOT_GCOV),1) CORE_OBJS += gcov-profiling.o diff --git a/core/psr.c b/core/psr.c new file mode 100644 index 00000000..d3ff6ac9 --- /dev/null +++ b/core/psr.c @@ -0,0 +1,42 @@ +/* Copyright 2017 IBM Corp. + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or + * implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#include <psr.h> + +static int opal_get_power_shift_ratio(u32 handle, int token __unused, + u32 *ratio) +{ + if (!ratio || !opal_addr_valid(ratio)) + return OPAL_PARAMETER; + + if (psr_get_class(handle) == PSR_CLASS_OCC) + return occ_get_psr(handle, ratio); + + return OPAL_UNSUPPORTED; +}; + +opal_call(OPAL_GET_POWER_SHIFT_RATIO, opal_get_power_shift_ratio, 3); + +static int opal_set_power_shift_ratio(u32 handle, int token, + u32 ratio) +{ + if (psr_get_class(handle) == PSR_CLASS_OCC) + return occ_set_psr(handle, token, ratio); + + return OPAL_UNSUPPORTED; +}; + +opal_call(OPAL_SET_POWER_SHIFT_RATIO, opal_set_power_shift_ratio, 3); diff --git a/doc/device-tree/ibm,opal/power-mgt/psr.rst b/doc/device-tree/ibm,opal/power-mgt/psr.rst new file mode 100644 index 00000000..edae8da3 --- /dev/null +++ b/doc/device-tree/ibm,opal/power-mgt/psr.rst @@ -0,0 +1,53 @@ +power-mgt/psr +------------------ + +Some systems allow modification of how power consumption throttling +is balanced between entities in a system. A typical one may be how the power +management complex should balance throttling CPU versus the GPU. An OPAL +call can be used to set these ratios, which are described in the device +tree. + +In the future, there may be more available settings than just CPU +versus GPU. + +Each child node in the "psr" node represents a configurable psr +sensor. + +For example : :: + cpu-to-gpu@1 + +The compatible property is set to "ibm,opal-power-shift-ratio". + +Each child node has below properties: + +`handle` + Handle to indicate the type of psr + +`label` + Name of the psr sensor + +The format of the handle is internal, and ``not`` ABI, although +currently it uses the following encoding :: + + | Class |Reserved| RID | Type | + |-------|--------|------|------| + +.. code-block:: dts + + power-mgt { + psr { + compatible = "ibm,opal-power-shift-ratio" + + cpu-to-gpu@0 { + name = "cpu-to-gpu" + handle = <0x00000000> + label = "cpu_to_gpu_0" + }; + + cpu-to-gpu@1 { + name = "cpu-to-gpu" + handle = <0x00000100> + label = "cpu_to_gpu_1" + }; + }; + }; diff --git a/doc/opal-api/opal-power-shift-ratio.rst b/doc/opal-api/opal-power-shift-ratio.rst new file mode 100644 index 00000000..7f1f71fe --- /dev/null +++ b/doc/opal-api/opal-power-shift-ratio.rst @@ -0,0 +1,79 @@ +.. _opal-psr: + +OPAL_GET_POWER_SHIFT_RATIO +============================== +OPAL call to read the power-shifting-ratio using a handle to identify +the type (e.g CPU vs. GPU, CPU vs. MEM) which is exported via +device-tree. + +The call can be asynchronus, where the token parameter is used to wait +for the completion. + +Parameters +---------- +:: + u32 handle + int token + u32 *ratio + +Returns +------- +OPAL_SUCCESS + Success + +OPAL_PARAMETER + Invalid ratio pointer + +OPAL_UNSUPPORTED + No support for reading psr + +OPAL_HARDWARE + Unable to procced due to the current hardware state + +OPAL_ASYNC_COMPLETION + Request was sent and an async completion message will be sent with + token and status of the request. + +OPAL_SET_POWER_SHIFT_RATIO +============================== +OPAL call to set power-shifting-ratio using a handle to identify +the type of PSR which is exported in device-tree. This call can be +asynchronus where the token parameter is used to wait for the +completion. + +Parameters +---------- +:: + u32 handle + int token + u32 ratio + +Returns +------- +OPAL_SUCCESS + Success + +OPAL_PARAMETER + Invalid ratio requested + +OPAL_UNSUPPORTED + No support for changing the ratio + +OPAL_PERMISSION + Hardware cannot take the request + +OPAL_ASYNC_COMPLETION + Request was sent and an async completion message will be sent with + token and status of the request. + +OPAL_HARDWARE + Unable to procced due to the current hardware state + +OPAL_BUSY + Previous request in progress + +OPAL_INTERNAL_ERROR + Error in request response + +OPAL_TIMEOUT + Timeout in request completion @@ -29,6 +29,7 @@ #include <timer.h> #include <i2c.h> #include <powercap.h> +#include <psr.h> /* OCC Communication Area for PStates */ @@ -1215,6 +1216,7 @@ exit: } static void occ_add_powercap_sensors(struct dt_node *power_mgt); +static void occ_add_psr_sensors(struct dt_node *power_mgt); static void occ_cmd_interface_init(void) { @@ -1260,6 +1262,9 @@ static void occ_cmd_interface_init(void) /* Add powercap sensors to DT */ occ_add_powercap_sensors(power_mgt); + + /* Add power-shifting-ratio CPU-GPU sensors to DT */ + occ_add_psr_sensors(power_mgt); } /* Powercap interface */ @@ -1364,6 +1369,96 @@ int occ_set_powercap(u32 handle, int token, u32 pcap) return opal_occ_command(&chips[i], token, &pcap_data); }; +/* Power-Shifting Ratio */ +enum psr_type { + PSR_TYPE_CPU_TO_GPU, /* 0% Cap GPU first, 100% Cap CPU first */ +}; + +int occ_get_psr(u32 handle, u32 *ratio) +{ + struct occ_dynamic_data *ddata; + struct proc_chip *chip; + u8 i = psr_get_rid(handle); + + if (psr_get_type(handle) != PSR_TYPE_CPU_TO_GPU) + return OPAL_UNSUPPORTED; + + if (i > nr_occs) + return OPAL_UNSUPPORTED; + + if (!(*chips[i].valid)) + return OPAL_HARDWARE; + + chip = get_chip(chips[i].chip_id); + ddata = get_occ_dynamic_data(chip); + *ratio = ddata->pwr_shifting_ratio; + return OPAL_SUCCESS; +} + +static u8 psr_cdata; +static struct opal_occ_cmd_data psr_data = { + .data = &psr_cdata, + .cmd = OCC_CMD_SET_POWER_SHIFTING_RATIO, +}; + +int occ_set_psr(u32 handle, int token, u32 ratio) +{ + struct occ_dynamic_data *ddata; + struct proc_chip *chip; + u8 i = psr_get_rid(handle); + + if (psr_get_type(handle) != PSR_TYPE_CPU_TO_GPU) + return OPAL_UNSUPPORTED; + + if (ratio > 100) + return OPAL_PARAMETER; + + if (i > nr_occs) + return OPAL_UNSUPPORTED; + + if (!(*chips[i].valid)) + return OPAL_HARDWARE; + + chip = get_chip(chips[i].chip_id); + ddata = get_occ_dynamic_data(chip); + if (ratio == ddata->pwr_shifting_ratio) + return OPAL_SUCCESS; + + psr_cdata = ratio; + return opal_occ_command(&chips[i], token, &psr_data); +} + +static void occ_add_psr_sensors(struct dt_node *power_mgt) +{ + struct dt_node *node; + int i; + + node = dt_new(power_mgt, "psr"); + if (!node) { + prerror("OCC: Failed to create power-shifting-ratio node\n"); + return; + } + + dt_add_property_string(node, "compatible", + "ibm,opal-power-shift-ratio"); + for (i = 0; i < nr_occs; i++) { + struct dt_node *cnode; + char name[20]; + u32 handle = psr_make_handle(PSR_CLASS_OCC, i, + PSR_TYPE_CPU_TO_GPU); + + cnode = dt_new_addr(node, "cpu-to-gpu", handle); + if (!cnode) { + prerror("OCC: Failed to create power-shifting-ratio node\n"); + return; + } + + snprintf(name, 20, "cpu_to_gpu_%d", chips[i].chip_id); + dt_add_property_string(cnode, "label", name); + dt_add_property_cells(cnode, "handle", handle); + } +} + /* CPU-OCC PState init */ /* Called after OCC init on P8 and P9 */ void occ_pstates_init(void) diff --git a/include/opal-api.h b/include/opal-api.h index 3ad4898d..8d33c08a 100644 --- a/include/opal-api.h +++ b/include/opal-api.h @@ -210,7 +210,9 @@ #define OPAL_IMC_COUNTERS_STOP 151 #define OPAL_GET_POWERCAP 152 #define OPAL_SET_POWERCAP 153 -#define OPAL_LAST 153 +#define OPAL_GET_POWER_SHIFT_RATIO 154 +#define OPAL_SET_POWER_SHIFT_RATIO 155 +#define OPAL_LAST 155 /* Device tree flags */ diff --git a/include/psr.h b/include/psr.h new file mode 100644 index 00000000..92c0aa59 --- /dev/null +++ b/include/psr.h @@ -0,0 +1,46 @@ +/* Copyright 2017 IBM Corp. + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or + * implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#ifndef __PSR_H +#define __PSR_H + +#include <opal.h> + +enum psr_class { + PSR_CLASS_OCC, +}; + +/* + * PSR handle is defined as u32. The first and last bytes are + * used to indicate the class and type. RID indiactes psr class + * specific data. For PSR_CLASS_OCC psr class RID is the chip index. + * + * | Class |Reserved| RID | Type | + * |-------|--------|------|------| + */ + +#define psr_make_handle(class, rid, type) (((class & 0xF) << 24) | \ + ((rid & 0xF) << 8) | (type & 0xF)) + +#define psr_get_class(handle) ((handle >> 24) & 0xF) +#define psr_get_rid(handle) ((handle >> 8) & 0xF) +#define psr_get_type(handle) (handle & 0xF) + +/* Powercap OCC interface */ +int occ_get_psr(u32 handle, u32 *ratio); +int occ_set_psr(u32 handle, int token, u32 ratio); + +#endif /* __PSR_H */ |
