Add skiboot-5.4.0 release notes

Signed-off-by: Stewart Smith <stewart@linux.vnet.ibm.com>

1 files changed, 690 insertions, 0 deletions

diff --git a/doc/release-notes/skiboot-5.4.0.rst b/doc/release-notes/skiboot-5.4.0.rst
new file mode 100644
index 00000000..eb33de55
--- /dev/null
+++ b/doc/release-notes/skiboot-5.4.0.rst
@@ -0,0 +1,690 @@
+.. _skiboot-5.4.0:
+
+=============
+skiboot-5.4.0
+=============
+
+skiboot-5.4.0 was released on Friday November 11th 2016. It is the new stable
+skiboot release, taking over from the 5.3.x series (first released August 2nd,
+2016). It comes after four release candidates, which have helped to shake out
+a few issues.
+
+skiboot-5.4.0 contains all bug fixes as of :ref:`skiboot-5.3.7`
+and :ref:`skiboot-5.1.18` (the currently maintained stable releases).
+
+Skiboot 5.4.x becomes the new stable release. For how the skiboot stable
+releases work, see :ref:`stable-rules` for details.
+
+Over :ref:`skiboot-5.4.0-rc4`, we have a few changes:
+
+- libstb: bump up the byte timeout for tpm i2c requests
+
+  This bumps up the byte timeout for tpm i2c requests from 10ms to 30ms.
+  Some p8dtu systems are getting i2c request timeout.
+
+- external/pflash: Perform the correct cleanup when -F is used to operate on
+  a file.
+
+- Add SuperMicro p8dtu1u and p8dtu2u platforms
+
+- Revert "core/ipmi: Set interrupt-parent property".
+  This reverts commit d997e482705d9fdff8e25fcbe07fb56008f96ae1 (introduced
+  in 5.4.0-rc1)
+
+  A problem was found with pre 4.2 linux kernels where a spurious WARNING
+  would be emitted. This change doesn't matter enough to scare users
+  so we can just revert it. ::
+
+        Warning was:
+        [    0.947741] irq: irq-62==>hwirq-0x3e mapping failed: -22
+        [    0.947793] ------------[ cut here ]------------
+        [    0.947838] WARNING: at kernel/irq/irqdomain.c:485
+
+- libflash/libffs: Fix possible NULL dereference
+
+Previous Release Candidates
+---------------------------
+
+There were four release candidates for skiboot 5.4.0:
+
+- :ref:`skiboot-5.4.0-rc4`
+- :ref:`skiboot-5.4.0-rc3`
+- :ref:`skiboot-5.4.0-rc2`
+- :ref:`skiboot-5.4.0-rc1`
+
+Changes since skiboot 5.3
+=========================
+
+Over skiboot-5.3, we have the following changes:
+
+New Features
+------------
+
+- Add SuperMicro p8dtu1u and p8dtu2u platforms
+- Initial Trusted Boot support (see :ref:`stb-overview`).
+  There are several limitations with this initial release:
+
+    - Only Nuvoton TPM 2.0 is supported
+    - Requires hardware rework on late revision Habanero or Firestone boards
+      in order to install TPM.
+
+  - Add i2c Nuvoton TPM 2.0 Driver
+  - romcode driver for POWER8 secure ROM
+  - See Device tree docs: :ref:`device-tree/tpm` and :ref:`device-tree/ibm,secureboot`
+  - See :ref:`stb-overview`
+
+- Support ``ibm,skiboot`` NVRAM partition with skiboot configuration options.
+
+  - These should generally only be used if you either completely know what
+    you are doing or need to work around a skiboot bug. They are **not**
+    intended for end users and are *explicitly* **NOT ABI**.
+  - Add support for supplying the kernel boot arguments from the ``bootargs``
+    configuration string in the ``ibm,skiboot`` NVRAM partition.
+  - Enabling the experimental fast reset feature is done via this method.
+
+- Add support for nap mode on P8 while in skiboot
+
+  - While nap has been exposed to the Operating System since day 1, we have
+    not utilized low power states when in skiboot itself, leading to higher
+    power consumption during boot.
+    We only enable the functionality after the 0x100 vector has been
+    patched, and we disable it before transferring control to Linux.
+
+- libflash: add 128MB MX66L1G45G part
+
+- Pointer validation of OPAL API call arguments.
+
+  - If the kernel called an OPAL API with vmalloc'd address
+    or any other address range in real mode, we would hit
+    a problem with aliasing. Since the top 4 bits are ignored
+    in real mode, pointers from 0xc.. and 0xd.. (and other ranges)
+    could collide and lead to hard to solve bugs. This patch
+    adds the infrastructure for pointer validation and a simple
+    test case for testing the API
+  - The checks validate pointers sent in using ``opal_addr_valid()``
+
+- Fast reboot for P8
+
+  This makes reboot take an *awful* lot less time, somewhere between four
+  and ten times faster than a full IPL. It is currently experimental and not
+  enabled by default.
+  You can enable the experimental support via nvram option: ::
+
+   # nvram -p ibm,skiboot --update-config experimental-fast-reset=feeling-lucky
+
+  **WARNING**: While we *think* we've managed to work out or around most of
+  the kinks with fast-reset, we are *not* enabling it by default in 5.4.
+
+  Notably, fast reset will *not* happen in the following scenarios:
+
+  - platform error
+
+    Most of the time, if we're rebooting due to a platform error, we should
+    trigger a checkstop. However, if we haven't been told what we should do
+    to trigger a checkstop (e.g. on an FSP machine), then we should still
+    fail to fast-reboot.
+
+    So, fast-reboot is disabled in the OPAL_CEC_REBOOT2 code path
+    for the OPAL_REBOOT_PLATFORM_ERROR reboot type.
+  - FSP code update
+  - Unrecoverable HMI
+  - A PHB is in CAPI mode
+
+    If a PHB is in CAPI mode, we cannot safely fast reboot - the PHB will be
+    fenced during the reboot resulting in major problems when we load the new
+    kernel.
+
+    In order to handle this safely, we need to disable CAPI mode before
+    resetting PHBs during the fast reboot. However, we don't currently support
+    this.
+
+    In the meantime, when fast rebooting, check if there are any PHBs with a
+    CAPP attached, and if so, abort the fast reboot and revert to a normal
+    reboot instead.
+
+
+Documentation
+-------------
+
+There have been a number of documentation fixes this release. Most prominent
+is the switch to Sphinx (from the Python project) and ReStructured Text (RST)
+as the documentation format. RST and Sphinx enable both production of pretty
+documentation in HTML and PDF formats while remaining readable in their raw
+form to those with no knowledge of RST.
+
+You can build a HTML site by doing the following: ::
+
+ cd doc/
+ make html
+
+As always, documentation patches are very, *very* welcome as we attempt to
+document the OPAL API, the device tree bindings and important parts of
+OPAL internals.
+
+We would like the Device Tree documentation to follow the style that can be
+included in the Device Tree Specification.
+
+
+General
+-------
+- Make console-log time more readable: seconds rather than timebase
+  Log format is now ``[SECONDS.(tb%512000000),LEVEL]``
+
+- Flash (PNOR) code improvements
+
+  - flash: Make size 64 bit safe
+    This makes the size of flash 64 bit safe so that we can have flash
+    devices greater than 4GB. This is especially useful for mambo disks
+    passed through to Linux.
+  - core/flash.c: load actual partition size
+    We are downloading 0x20000 bytes from PNOR for CAPP, but currently the
+    CAPP lid is only 40K.
+  - flash: Rework error paths and messages for multiple flash controllers
+    Now that we have mambo bogusdisk flash, we can have many flash chips.
+    This is resulting in some confusing output messages.
+
+- core/init: Fix "failure of getting node in the free list" warning on boot.
+- slw: improve error message for SLW timer stuck
+
+- Centaur / XSCOM error handling
+
+  - print message on disabling xscoms to centaur due to many errors
+  - Mark centaur offline after 10 consecutive access errors
+
+- XSCOM improvements
+
+  - xscom: Map all HMER status codes to OPAL errors
+  - xscom: Initialize the data to a known value in ``xscom_read``
+    In case of error, don't leave the data random. It helps debugging when
+    the user fails to check the error code. This happens due to a bug in the
+    PRD wrapper app.
+  - chip: Add a quirk for when core direct control XSCOMs are missing
+
+- p8-i2c: Don't crash if a centaur errored out
+
+- cpu: Make endian switch message more informative
+- cpu: Display number of started CPUs during boot
+- core/init: ensure that HRMOR is zero at boot
+- asm: Fix backtrace for unexpected exception
+
+- cpu: Remove pollers calling heuristics from ``cpu_wait_job``
+  This will be handled by ``time_wait_ms()``. Also remove a useless
+  ``smt_medium()``.
+  Note that this introduce a difference in behaviour: time_wait
+  will only call the pollers on the boot CPU while ``cpu_wait_job()``
+  could call them on any. However, I can't think of a case where
+  this is a problem.
+
+- cpu: Remove global job queue
+  Instead, target a specific CPU for a global job at queuing time.
+  This will allow us to wake up the target using an interrupt when
+  implementing nap mode.
+  The algorithm used is to look for idle primary threads first, then
+  idle secondaries, and finally the less loaded thread. If nothing can
+  be found, we fallback to a synchronous call.
+- lpc: Log LPC SYNC errors as unrecoverable ones for manufacturing
+- lpc: Optimize SerIRQ dispatch based on which PSI IRQ fired
+- interrupts: Add new source ``->attributes()`` callback
+    This allows a given source to provide per-interrupt attributes
+    such as whether it targets OPAL or Linux and it's estimated
+    frequency.
+
+    The former allows to get rid of the double set of ops used to
+    decide which interrupts go where on some modules like the PHBs
+    and the latter will be eventually used to implement smart
+    caching of the source lookups.
+- opal/hmi: Fix a TOD HMI failure during a race condition.
+- platform: Add BT to Generic platform
+
+
+NVRAM
+-----
+- Support ``ibm,skiboot`` partition for skiboot specific configuration options
+- flash: Size NVRAM based on ECC for OpenPOWER platforms
+    If NVRAM has ECC (as per the ffs header) then the actual size of the
+    partition is less than reported by the ffs header in the PNOR then the
+    actual size of the partition is less than reported by the ffs header.
+
+NVLink/NPU
+----------
+
+- Fix reserved PE#
+- NPU bdfn allocation bugfix
+- Fix bad PE number check
+    NPUs have 4 PEs which are zero indexed, so {0, 1, 2, 3}.  A bad PE number
+    check in npu_err_inject checks if the PE number is greater than 4 as a
+    fail case, so it would wrongly perform operations on a non-existant PE 4.
+- Use PCI virtual device
+- assert the NPU irq min is aligned.
+- program NPU BUID reg properly
+- npu: reword "error" to indicate it's actually a warning
+   Incorrect FWTS annotation.
+   Without this patch, you get spurious FirmWare Test Suite (FWTS) warnings
+   about NVLink not working on machines that aren't fully populated with
+   GPUs.
+- external: NPU hardware procedure script
+   Performing NPU hardware procedures requires some config space magic.
+   Put all that magic into a script, so you can just specify the target
+   device and the procedure number.
+
+PCI
+---
+
+- Generic fixes
+
+  - Claim surprise hotplug capability
+  - Reserve PCI buses for RC's slot
+  - Update PCI topology after power change
+  - Return slot cached power state
+  - Cache power state on slot without power control
+  - Avoid hot resets at boot time
+  - Fix initial PCIe slot power state
+  - Print CRS retry times
+    It's useful to know the CRS retry times before the PCI device is
+    detected successfully. In PCI hot add case, it usually indicates
+    time consumed for the adapter's firmware to be partially ready
+    (responsive PCI config space).
+  - core/pci: Fix the power-off timeout in ``pci_slot_power_off()``
+    The timeout should be 1000ms instead of 1000 ticks while powering
+    off PCI slot in ``pci_slot_power_off()``. Otherwise, it's likely to
+    hit timeout powering off the PCI slot as below skiboot logs reveal: ::
+
+      [5399576870,5] PHB#0005:02:11.0 Timeout powering off slot
+
+  - pci: Check power state before powering off slot.
+    Prevents the erroneous "Error -1 powering off slot" error message.
+
+- PHB3
+
+  - Override root slot's ``prepare_link_change()`` with PHB's
+  - Disable surprise link down event on PCI slots
+  - Disable ECRC on Broadcom adapter behind PMC switch
+
+- astbmc platforms
+
+  - Support dynamic PCI slot. We might insert a PCIe switch to PHB direct slot
+    and the downstream ports of the PCIe switch supports PCI hotplug.
+
+
+CAPI
+----
+
+- hw/phb3: Update capi initialization sequence
+    The capi initialization sequence was revised in a circumvention
+    document when a 'link down' error was converted from fatal to Endpoint
+    Recoverable. Other, non-capi, register setup was corrected even before
+    the initial open-source release of skiboot, but a few capi-related
+    registers were not updated then, so this patch fixes it.
+
+
+Mambo Simulator
+---------------
+
+- Helpers for POWER9 Mambo.
+- mambo: Advertise available RADIX page sizes
+- mambo: Add section for kernel command line boot args
+  Users can set kernel command line boot arguments for Mambo in a tcl
+  script.
+- mambo: add exception and qtrace helpers
+- external/mambo: Update skiboot.tcl to add page-sizes nodes to device tree
+
+Simics Simulator
+----------------
+
+- chiptod: Enable ChipTOD in SIMICS
+
+Utilities
+---------
+
+- pflash
+
+  - fix harmless buffer overflow: ``fl_total_size`` was ``uint32_t`` not ``uint64_t``.
+  - Don't try to write protect when writing to flash file
+  - Misc small improvements to code and code style
+  - makefile bug fixes
+  - external/pflash: Make MTD accesses the default
+
+    Now that BMC and host kernel mtd drivers exist and have matured we
+    should use them by default.
+
+    This is especially important since we seem to be telling everyone to use
+    pflash (pflash world domination plans are continuing on schedule).
+  - external/pflash: Catch incompatible combination of flags
+  - external/common: arm: Don't error trying to wrprotect with MTD access
+  - libflash/libffs: Use blocklevel_smart_write() when updating partitions
+
+- external/boot_tests
+
+  - remove lid from the BMC after flashing
+  - add the nobooting option -N
+  - add arbitrary lid option -F
+
+- ``getscom`` / ``getsram`` / ``putscom``: Parse chip-id as hex
+    We print the chip-id in hex (without a leading 0x), but we fail to
+    parse that same value correctly in ``getscom`` / ``getsram`` / ``putscom`` ::
+
+     # getscom -l
+     ...
+     80000000 | DD2.0 | Centaur memory buffer
+     # getscom -c 80000000 201140a
+     Error -19 reading XSCOM
+
+    Fix this by assuming base 16 when parsing chip-id.
+
+PRD
+---
+
+- opal-prd: Fix error code from ``scom_read`` and ``scom_write``
+- opal-prd: Add get_interface_capabilities to host interfaces
+- opal-prd: fix for 64-bit pnor sizes
+- occ/prd/opal-prd: Queue OCC_RESET event message to host in OpenPOWER
+    During an OCC reset cycle the system is forced to Psafe pstate.
+    When OCC becomes active, the system has to be restored to its
+    last pstate as requested by host. So host needs to be notified
+    of OCC_RESET event or else system will continue to remian in
+    Psafe state until host requests a new pstate after the OCC
+    reset cycle.
+
+IBM FSP Based Platforms
+-----------------------
+
+- fsp/console: Allocate irq for each hvc console
+    Allocate an irq number for each hvc console and set its interrupt-parent
+    property so that Linux can use the opal irqchip instead of the
+    OPAL_EVENT_CONSOLE_INPUT interface.
+- platforms/firenze: Fix clock frequency dt property: ::
+
+    [ 1.212366090,3] DT: Unexpected property length /xscom@3fc0000000000/i2cm@a0020/clock-frequency
+
+- HDAT: Fix typo in nest-frequency property
+    nest-frquency -> nest-frequency
+- platforms/ibm-fsp: Use power_ctl bit when determining slot reset method
+    The power_ctl bit is used to represent if power management is available.
+    If power_ctl is set to true, then the I2C based external power management
+    functionality will be populated on the PCI slot. Otherwise we will try to
+    use the inband PERST as the fundamental reset, as before.
+- FSP/ELOG: Fix elog timeout issue
+    Presently we set timeout value as soon as we add elog to queue. If
+    we have multiple elogs to write, it doesn't consider queue wait time.
+    Instead set timeout value when we are actually sending elog to FSP.
+- FSP/ELOG: elog_enable flag should be false by default
+    This issue is one of the corner case, which is related to recent change
+    went upstream and only observed in the petitboot prompt, where we see
+    only one error log instead of getting all error log in
+    ``/sys/firmware/opal/elog``.
+
+
+
+POWER9
+------
+
+Skiboot 5.4 contains only *preliminary* support for POWER9. It's suitable
+only for use in simulators. If working on hardware, use more recent skiboot
+or development branches. We will not be backporting POWER9 fixes to 5.4.x.
+
+- mambo: Make POWER9 look like DD2
+- core/cpu.c: Add OPAL call to setup Nest MMU
+- psi: On p9, create an interrupt-map for routing PSI interrupts
+- lpc: Add P9 LPC interrupts support
+- chiptod: Basic P9 support
+- psi: Add P9 support
+
+Testing and Debugging
+---------------------
+
+- test/qemu: bump qemu version used in CI, adds IPMI support
+- platform/qemu: add BT and IPMI support
+  Enables testing BT and IPMI functionality in the Qemu simulator
+- init: In debug builds, enable debug output to console
+- mem_region: Be a bit smarter about poisoning
+    Don't poison chunks that are already free and poison regions on
+    first allocation. This speeds things up dramatically.
+- libc: Use 8-bytes stores for non-0 memset too
+    Memory poisoning hammers this, so let's be a bit smart about it and
+    avoid falling back to byte stores when the data is not 0
+- fwts: add annotation for manufacturing mode
+- check: Fix bugs in mem region tests
+- Don't set -fstack-protector-all unconditionally
+    We set it already in DEBUG builds and we use -fstack-protector-strong
+    in release builds which provides most of the benefits and is more
+    efficient.
+- Build host programs (and checks) with debug enabled
+    This enables memory poisoning in allocations and list checking
+    among other things.
+- Add global DEBUG make flag
+
+
+
+Command line arguments to BOOTKERNEL
+====================================
+
+- core/init.c: Fix bootargs parsing
+
+  Currently the bootargs are unconditionally deleted, which causes
+  a bug where the bootargs passed in by the device tree are lost.
+
+  This patch deletes bootargs only if it needs to be replaced by the NVRAM
+  entry.
+
+  This patch also removes KERNEL_COMMAND_LINE config option in favour of
+  using the NVRAM or a device tree.
+
+
+Other changes
+=============
+- extract-gcov: build with -m64 if compiler supports it.
+
+  Fixes build break on 32bit ppc64 (e.g. PowerMac G5, where user space
+  is mostly 32bit).
+
+
+Flash on OpenPOWER platforms
+============================
+
+- flash: rework flash_load_resource to correctly read FFS/STB
+
+  This fixes the previous reverts of loading the CAPP partition with
+  STB headers (which broke CAPP partitions without STB headers).
+
+  The new logic fixes both CAPP partition loading with STB headers *and*
+  addresses a long standing bug due to differing interpretations of FFS.
+
+  The f_part utility that *constructs* PNOR files just sets actualSize=totalSize
+  no matter on what the size of the partition is. Prior to this patch,
+  skiboot would always load actualSize, leading to longer than needed IPL.
+
+  The pflash utility updates actualSize, so no developer has really ever
+  noticed this, apart from maybe an inkling that it's odd that a freshly
+  baked PNOR from op-build takes ever so slightly longer to boot than one
+  that has had individual partitions pflashed in.
+
+  With this patch, we now compute actualSize. For partitions with a STB
+  header, we take the payload size from the STB header. For partitions
+  that don't have a STB header, we compute the size either by parsing
+  the ELF header or by looking at the subpartition header and computing it.
+
+  We now need to read the entire partition for partitions with subpartitions
+  so that we pass consistent values to be measured as part of Trusted Boot.
+
+  As of this patch, the actualSize field in FFS is *not* relied on for
+  partition size, we determine it from the content of the partition.
+
+  However, this patch *will* break loading of partitions that are not ELF
+  and do not contain subpartitions. Luckily, nothing in-tree makes use of
+  that.
+
+Contributors
+============
+
+Extending the analysis done for the last few releases, we can see our trends
+in code review across versions:
+
+======== ====== ======= ======= ======  ========
+Release	 csets	Ack	Reviews	Tested	Reported
+======== ====== ======= ======= ======  ========
+5.0	 329	 15	     20	     1	       0
+5.1	 372	 13	     38	     1	       4
+5.2-rc1	 334	 20	     34	     6	      11
+5.3-rc1  302     36          53      4         5
+5.4-rc1  278      8          19      0         4
+5.4.0    361     16          28      1         9
+======== ====== ======= ======= ======  ========
+
+Interesting is the stats of 5.4.0-rc1 versus the final 5.4.0, there's been
+a doubling of Acks, an increase in reviewed-by and reported-by. There's
+nothing like an impending release to get people to look closer.
+
+Processed 361 csets from 34 developers
+A total of 20206 lines added, 5843 removed (delta 14363)
+
+Developers with the most changesets:
+
+========================== === =======
+Developer                    # %
+========================== === =======
+Stewart Smith              105 (29.1%)
+Benjamin Herrenschmidt      50 (13.9%)
+Claudio Carvalho            47 (13.0%)
+Gavin Shan                  24 (6.6%)
+Cyril Bur                   20 (5.5%)
+Oliver O'Halloran           18 (5.0%)
+Michael Neuling             12 (3.3%)
+Mukesh Ojha                 12 (3.3%)
+Pridhiviraj Paidipeddi       7 (1.9%)
+Vasant Hegde                 7 (1.9%)
+Russell Currey               7 (1.9%)
+Joel Stanley                 4 (1.1%)
+Alistair Popple              4 (1.1%)
+Mahesh Salgaonkar            4 (1.1%)
+Nageswara R Sastry           4 (1.1%)
+Chris Smart                  3 (0.8%)
+Sam Mendoza-Jonas            3 (0.8%)
+Vipin K Parashar             3 (0.8%)
+Balbir Singh                 3 (0.8%)
+Frederic Barrat              3 (0.8%)
+leoluo                       2 (0.6%)
+Rafael Fonseca               2 (0.6%)
+Jack Miller                  2 (0.6%)
+Patrick Williams             2 (0.6%)
+Jeremy Kerr                  2 (0.6%)
+Suraj Jitindar Singh         2 (0.6%)
+Milton Miller                2 (0.6%)
+Andrew Donnellan             1 (0.3%)
+Shilpasri G Bhat             1 (0.3%)
+Frederic Bonnard             1 (0.3%)
+Breno Leitao                 1 (0.3%)
+Anton Blanchard              1 (0.3%)
+Nicholas Piggin              1 (0.3%)
+Cédric Le Goater             1 (0.3%)
+========================== === =======
+
+Developers with the most changed lines:
+
+========================= ==== =======
+Developer                    # %
+========================= ==== =======
+Claudio Carvalho          6947 (32.9%)
+Stewart Smith             6667 (31.6%)
+Benjamin Herrenschmidt    2586 (12.3%)
+Gavin Shan                1185 (5.6%)
+Cyril Bur                  692 (3.3%)
+Mukesh Ojha                565 (2.7%)
+Oliver O'Halloran          343 (1.6%)
+Russell Currey             343 (1.6%)
+leoluo                     269 (1.3%)
+Pridhiviraj Paidipeddi     236 (1.1%)
+Balbir Singh               227 (1.1%)
+Michael Neuling            211 (1.0%)
+Nageswara R Sastry         132 (0.6%)
+Cédric Le Goater           115 (0.5%)
+Vipin K Parashar            68 (0.3%)
+Alistair Popple             66 (0.3%)
+Vasant Hegde                65 (0.3%)
+Mahesh Salgaonkar           50 (0.2%)
+Shilpasri G Bhat            45 (0.2%)
+Suraj Jitindar Singh        41 (0.2%)
+Nicholas Piggin             34 (0.2%)
+Sam Mendoza-Jonas           33 (0.2%)
+Jack Miller                 32 (0.2%)
+Chris Smart                 28 (0.1%)
+Jeremy Kerr                 23 (0.1%)
+Milton Miller               19 (0.1%)
+Joel Stanley                13 (0.1%)
+Andrew Donnellan            13 (0.1%)
+Rafael Fonseca              12 (0.1%)
+Patrick Williams            11 (0.1%)
+Frederic Barrat              6 (0.0%)
+Anton Blanchard              3 (0.0%)
+Frederic Bonnard             2 (0.0%)
+Breno Leitao                 2 (0.0%)
+========================= ==== =======
+
+Developers with the most lines removed:
+
+========================== === ======
+Developer                    # %
+========================== === ======
+Cyril Bur                  206 (3.5%)
+Rafael Fonseca               8 (0.1%)
+========================== === ======
+
+Developers with the most signoffs (total 278):
+
+========================== === =======
+Developer                    # %
+========================== === =======
+Stewart Smith              268 (96.4%)
+Alistair Popple              4 (1.4%)
+Jim Yuan                     2 (0.7%)
+Cyril Bur                    1 (0.4%)
+Michael Neuling              1 (0.4%)
+Jeremy Kerr                  1 (0.4%)
+Benjamin Herrenschmidt       1 (0.4%)
+========================== === =======
+
+Developers with the most reviews (total 28):
+
+========================== === =======
+Developer                    # %
+========================== === =======
+Andrew Donnellan             6 (21.4%)
+Vasant Hegde                 5 (17.9%)
+Mukesh Ojha                  5 (17.9%)
+Joel Stanley                 3 (10.7%)
+Russell Currey               3 (10.7%)
+Cyril Bur                    2 (7.1%)
+Balbir Singh                 2 (7.1%)
+Alistair Popple              1 (3.6%)
+Vaidyanathan Srinivasan      1 (3.6%)
+========================== === =======
+
+Developers with the most test credits (total 1):
+
+========================== === ========
+Developer                    # %
+========================== === ========
+Pridhiviraj Paidipeddi       1 (100.0%)
+========================== === ========
+
+Developers who gave the most tested-by credits (total 1):
+
+========================== === ========
+Developer                    # %
+========================== === ========
+Gavin Shan                   1 (100.0%)
+========================== === ========
+
+
+Developers with the most report credits (total 9):
+
+========================== === ========
+Developer                    # %
+========================== === ========
+Pridhiviraj Paidipeddi       3 (33.3%)
+Gavin Shan                   1 (11.1%)
+Vasant Hegde                 1 (11.1%)
+Michael Neuling              1 (11.1%)
+Benjamin Herrenschmidt       1 (11.1%)
+Andrei Warkenti              1 (11.1%)
+Li Meng                      1 (11.1%)
+========================== === ========