dpo: Move the FSP async messagae handling into a separate file

This patch moves the DPO message handling from FSP core code into
a separate file to make it more cleaner and to add OPAL interfaces
in the subsequent patch. It does not change anything functionally.

Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

5 files changed, 102 insertions, 48 deletions

diff --git a/hw/fsp/Makefile.inc b/hw/fsp/Makefile.inc
index 95f1f04d..d4654d5f 100644
--- a/hw/fsp/Makefile.inc
+++ b/hw/fsp/Makefile.inc
@@ -3,7 +3,7 @@ SUBDIRS += hw/fsp
 FSP_OBJS  = fsp.o fsp-console.o fsp-rtc.o fsp-nvram.o fsp-sysparam.o
 FSP_OBJS += fsp-surveillance.o fsp-codeupdate.o fsp-sensor.o
 FSP_OBJS += fsp-diag.o fsp-leds.o fsp-mem-err.o fsp-op-panel.o
-FSP_OBJS += fsp-elog-read.o fsp-elog-write.o fsp-epow.o
+FSP_OBJS += fsp-elog-read.o fsp-elog-write.o fsp-epow.o fsp-dpo.o
 FSP_OBJS += fsp-dump.o fsp-mdst-table.o
 FSP_OBJS += fsp-attn.o
 FSP = hw/fsp/built-in.o
diff --git a/hw/fsp/fsp-dpo.c b/hw/fsp/fsp-dpo.c
new file mode 100644
index 00000000..23ab1ba7
--- /dev/null
+++ b/hw/fsp/fsp-dpo.c
@@ -0,0 +1,94 @@
+/* Copyright 2013-2014 IBM Corp.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * 	http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
+ * implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+/*
+ * Handle FSP DPO (Delayed Power Off) event notification
+ */
+#include <skiboot.h>
+#include <console.h>
+#include <fsp.h>
+#include <device.h>
+#include <stdio.h>
+#include <opal.h>
+#include <opal-msg.h>
+
+#define PREFIX "FSPDPO: "
+
+static bool fsp_dpo_pending = false;
+
+/* Process FSP DPO init message */
+static void fsp_process_dpo(struct fsp_msg *msg)
+{
+	u32 cmd = FSP_RSP_INIT_DPO;
+	int rc;
+
+	/* DPO message does not have the correct signatures */
+	if ((msg->data.bytes[0] != 0xf4) || (msg->data.bytes[1] != 0x20)) {
+		printf("DPO: Message signatures did not match\n");
+		cmd |= FSP_STATUS_INVALID_CMD;
+		fsp_queue_msg(fsp_mkmsg(cmd, 0), fsp_freemsg);
+		return;
+	}
+
+	/* Sapphire is already in "DPO pending" state */
+	if (fsp_dpo_pending) {
+		printf("DPO: Sapphire is already in DPO pending state\n");
+		cmd |= FSP_STATUS_INVALID_DPOSTATE;
+		fsp_queue_msg(fsp_mkmsg(cmd, 0), fsp_freemsg);
+		return;
+	}
+
+	/* Inform the host about DPO */
+	rc = opal_queue_msg(OPAL_MSG_DPO, NULL, NULL);
+	if (rc) {
+		printf("DPO: OPAL message queuing failed\n");
+		return;
+	}
+
+	/* Acknowledge the FSP on DPO */
+	fsp_queue_msg(fsp_mkmsg(cmd, 0), fsp_freemsg);
+	fsp_dpo_pending = true;
+	/*
+	 * Sapphire is now in DPO pending state. After first detecting DPO
+	 * condition from Sapphire, the host will have 45 minutes to prepare
+	 * the system for shutdown. The host must take all necessary actions
+	 * required in that regard and at the end shutdown itself. The host
+	 * shutdown sequence eventually will make the call OPAL_CEC_POWER_DOWN
+	 * which in turn ask the FSP to shutdown the CEC. If the FSP does not
+	 * receive the cec power down command from Sapphire within 45 minutes,
+	 * it will assume that the host and the Sapphire has processed the DPO
+	 * sequence successfully and hence force power off the system.
+	 */
+}
+
+/* Handle DPO sub-command from FSP */
+static bool fsp_dpo_message(u32 cmd_sub_mod, struct fsp_msg *msg)
+{
+	if (cmd_sub_mod == FSP_CMD_INIT_DPO) {
+		printf(PREFIX "SP initiated Delayed Power Off (DPO)\n");
+		fsp_process_dpo(msg);
+	}
+	return false;
+}
+
+static struct fsp_client fsp_dpo_client = {
+	.message = fsp_dpo_message,
+};
+
+void fsp_dpo_init(void)
+{
+	fsp_register_client(&fsp_dpo_client, FSP_MCLASS_SERVICE);
+	printf(PREFIX "FSP DPO support initialized\n");
+}
diff --git a/hw/fsp/fsp.c b/hw/fsp/fsp.c
index 2189bbb9..57cba317 100644
--- a/hw/fsp/fsp.c
+++ b/hw/fsp/fsp.c
@@ -100,9 +100,6 @@ static u64 fsp_hir_timeout;
 #define FSP_CRITICAL_OP_TIMEOUT		128
 #define FSP_DRCR_CLEAR_TIMEOUT		128
 
-/* DPO pending state */
-static bool fsp_dpo_pending = false;
-
 /*
  * We keep track on last logged values for some things to print only on
  * value changes, but also to releive pressure on the tracer which
@@ -1123,7 +1120,6 @@ static bool fsp_local_command(u32 cmd_sub_mod, struct fsp_msg *msg)
 {
 	u32 cmd = 0;
 	u32 rsp_data = 0;
-	int rc;
 
 	switch(cmd_sub_mod) {
 	case FSP_CMD_CONTINUE_IPL:
@@ -1184,49 +1180,6 @@ static bool fsp_local_command(u32 cmd_sub_mod, struct fsp_msg *msg)
 			fsp_repost_queued_msgs_post_rr();
 		}
 		return true;
-	case FSP_CMD_INIT_DPO:
-		printf("FSP: SP initiated DPO (Delayed Power Off)\n");
-		cmd = FSP_RSP_INIT_DPO;
-
-		/* DPO message does not have the correct signatures */
-		if ((msg->data.bytes[0] != 0xf4) || (msg->data.bytes[1] != 0x20)) {
-			printf("DPO: Message signatures did not match\n");
-			cmd |= FSP_STATUS_INVALID_CMD;
-			fsp_queue_msg(fsp_mkmsg(cmd, 0), fsp_freemsg);
-			return false;
-		}
-
-		/* Sapphire is already in "DPO pending" state */
-		if (fsp_dpo_pending) {
-			printf("DPO: Sapphire is already in DPO pending state\n");
-			cmd |= FSP_STATUS_INVALID_DPOSTATE;
-			fsp_queue_msg(fsp_mkmsg(cmd, 0), fsp_freemsg);
-			return false;
-		}
-
-		/* Inform the host about DPO */
-		rc = opal_queue_msg(OPAL_MSG_DPO, NULL, NULL);
-		if (rc) {
-			printf("DPO: OPAL message queuing failed\n");
-			return false;
-		}
-
-		/* Acknowledge the FSP on DPO */
-		fsp_queue_msg(fsp_mkmsg(cmd, 0), fsp_freemsg);
-		fsp_dpo_pending = true;
-
-		/*
-		 * Sapphire is now in DPO pending state. After first detecting DPO
-		 * condition from Sapphire, the host will have 45 minutes to prepare
-		 * the system for shutdown. The host must take all necessary actions
-		 * required in that regard and at the end shutdown itself. The host
-		 * shutdown sequence eventually will make the call OPAL_CEC_POWER_DOWN
-		 * which in turn ask the FSP to shutdown the CEC. If the FSP does not
-		 * receive the cec power down command from Sapphire within 45 minutes,
-		 * it will assume that the host and the Sapphire has processed the DPO
-		 * sequence successfully and hence force power off the system.
-		 */
-		return true;
 	case FSP_CMD_CLOSE_HMC_INTF:
 		/* Close the HMC interface */
 		/* Though Sapphire does not support a HMC connection, the FSP
diff --git a/include/fsp.h b/include/fsp.h
index 58ea36ac..53d03f92 100644
--- a/include/fsp.h
+++ b/include/fsp.h
@@ -761,4 +761,7 @@ extern void fsp_set_led_state(struct fsp_msg *msg);
 /* EPOW */
 extern void fsp_epow_init(void);
 
+/* DPO */
+extern void fsp_dpo_init(void);
+
 #endif /* __FSP_H */
diff --git a/platforms/ibm-fsp/common.c b/platforms/ibm-fsp/common.c
index 91eaeead..4a2c6c1d 100644
--- a/platforms/ibm-fsp/common.c
+++ b/platforms/ibm-fsp/common.c
@@ -146,6 +146,10 @@ void ibm_fsp_init(void)
 	op_display(OP_LOG, OP_MOD_INIT, 0x000A);
 	fsp_epow_init();
 
+	/* EPOW */
+	op_display(OP_LOG, OP_MOD_INIT, 0x000B);
+	fsp_dpo_init();
+
 	/* Setup console */
 	if (fsp_present())
 		fsp_console_add_nodes();