summaryrefslogtreecommitdiffstats
path: root/meta-openbmc-machines
Commit message (Expand)AuthorAgeFilesLines
* Add support for secondary PCIe region ambient temperature sensor on Talos II ...Raptor Engineering Development Team2018-05-093-0/+26
* Add initial IPMI sensor mappings for Talos IIRaptor Engineering Development Team2018-05-096-0/+1865
* FRU: Add Entity ID in the host FRU inventory yamlRatan Gupta2018-05-081-0/+6
* Add missing mutability attributes to IPMI inventory YAMLRaptor Engineering Development Team2018-05-081-0/+71
* Update IPMI YAML from Romulus sourceRaptor Engineering Development Team2018-05-081-437/+499
* sensor: Modify config for sensor to add additional fieldsTom Joseph2018-05-082-0/+7
* Bring boot VDN in line with values in datasheetRaptor Engineering Development Team2018-05-081-1/+1
* Fix power sequencing on Talos II.Brandon Bergren2018-05-082-0/+4
* Tweak chassis fan PID tuningRaptor Engineering Development Team2018-05-071-2/+2
* Remove broken ASpeed PWM fan and tach driver tie-inRaptor Engineering Development Team2018-05-072-2/+0
* Back off chassis fan proportional constantraptor-v1.0405-04-2018Raptor Engineering Development Team2018-05-041-1/+1
* Lower chassis fan floor maps slightly to reduce unneccessary fan noise under ...Raptor Engineering Development Team2018-05-041-7/+7
* Switch to PID control of main fansRaptor Engineering Development Team2018-04-291-62/+65
* Wait 5 seconds for fans to reach full speed after fan controller initRaptor Engineering Development Team2018-04-281-1/+1
* Update fan monitor YAML to new syntaxRaptor Engineering Development Team2018-04-281-1/+7
* Update fan event YAML to new syntaxRaptor Engineering Development Team2018-04-281-193/+225
* Make decrease symmetric with increaseRaptor Engineering Development Team2018-04-282-12/+12
* Don't set zone 2 to high speed when fewer than 4 chassis fans are installed, ...Raptor Engineering Development Team2018-04-281-76/+0
* Tighten up fan response againRaptor Engineering Development Team2018-04-282-15/+15
* Switch openpower-dbus-interfaces to Raptor Computing Systems GIT repositoryRaptor Engineering Development Team2018-04-281-1/+1
* Raise CPU core temp setpointsRaptor Engineering Development Team2018-04-202-71/+71
* Enhance OCC communication failure error recoveryRaptor Engineering Development Team2018-04-141-0/+13
* Revup pdbgRaptor Engineering Development Team2018-04-141-1/+1
* Allow the on-board VGA device to be enabled or disabled based on FPGA jumper ...Raptor Engineering Development Team2018-04-144-1/+60
* Minimize chassis fan hunting with additional fan speed floor mappings in comm...Raptor Engineering Development Team2018-02-191-7/+13
* Adjust floor threshold map to avoid chassis fan hunting at typical ambient te...Raptor Engineering Development Team2018-02-191-7/+7
* Loosen ambient temperature fan controls somewhatRaptor Engineering Development Team2018-02-191-3/+3
* Set chassis fan speeds based on on-board ambient temperature sensorRaptor Engineering Development Team2018-02-191-60/+11
* Use hardbeep instead of softbeep on Talos systemsRaptor Engineering Development Team2018-01-251-1/+1
* Split fan control zones for CPU0 and CPU1Raptor Engineering Development Team2018-01-233-22/+93
* Add softbeep packaging filesRaptor Engineering Development Team2018-01-221-1/+1
* Reset OCC on error detectionRaptor Engineering Development Team2018-01-221-2/+11
* Remove DD1 VCS workaround hackRaptor Engineering Development Team2018-01-229-97/+2
* Recover from loss of either OCCRaptor Engineering Development Team2018-01-221-3/+39
* Restart OCC service before restarting fan controllerRaptor Engineering Development Team2018-01-211-2/+17
* Fix incorrect Talos fan control settingsRaptor Engineering Development Team2018-01-213-21/+21
* Enable ambient temperature sensorRaptor Engineering Development Team2018-01-212-0/+2
* Add watchdog mode to OCC enable serviceRaptor Engineering Development Team2018-01-212-5/+20
* Enable OCC service after IPL completionRaptor Engineering Development Team2018-01-212-5/+6
* Enable the W83773G driver on Talos systemsRaptor Engineering Development Team2018-01-201-0/+1
* Enable Talos IPL monitor LED serviceRaptor Engineering Development Team2018-01-201-1/+1
* Add IPL status observerRaptor Engineering Development Team2018-01-201-0/+1
* Revup pdbgRaptor Engineering Development Team2018-01-171-1/+1
* Signal BMC ready when BMC has finished booting on Talos systemsRaptor Engineering Development Team2018-01-171-0/+3
* Initial port of Witherspoon fan control to TalosRaptor Engineering Development Team2018-01-1745-9/+2933
* Redirect most of the Phosphor applications from GitHub to the Raptor Computin...Raptor Engineering Development Team2018-01-172-2/+2
* Copy Romulus files to Talos for future developmentRaptor Engineering Development Team2018-01-1744-0/+3433
* Add AST2500 Layer READMEGunnar Mills2018-01-161-0/+7
* Add Witherspoon Layer READMEGunnar Mills2018-01-161-0/+8
* meta-openpower: Predicate packages on MACHINE_FEATURESXo Wang2018-01-168-17/+17
OpenPOWER on IntegriCloud