summaryrefslogtreecommitdiffstats
path: root/meta-openbmc-machines
Commit message (Expand)AuthorAgeFilesLines
* Don't attempt to control AVSBus regulators on CPU socket 1 when CPU 1 is not ...Raptor Engineering Development Team2018-06-064-18/+89
* Add initial tie-ins for CPU frequency monitoring on BMC via DBUSraptor-v1.0605-18-2018Raptor Engineering Development Team2018-05-202-0/+112
* Tune CPU fan PID loops for faster attackRaptor Engineering Development Team2018-05-201-2/+2
* Update Talos II fan config for latest phosphor-hwmonRaptor Engineering Development Team2018-05-161-0/+3
* Use OpenPower variable for PS derating factorMatt Spinler2018-05-162-1/+7
* op-occ: add native recipe to install error yaml to shared locationMarri Devender Rao2018-05-162-0/+38
* Package installed error yaml filesMarri Devender Rao2018-05-161-1/+2
* Update OCC monitoring services for new pathsRaptor Engineering Development Team2018-05-165-10/+27
* Revup openpower-occ-controlRaptor Engineering Development Team2018-05-161-1/+1
* kernel: Move to 4.13 kernel (backport)Joel Stanley2018-05-169-9/+9
* Revert "Delay OCC binding from host boot complete signal"Raptor Engineering Development Team2018-05-151-4/+0
* Raise kernel tick rate and forcibly enable hrtimersraptor-v1.0505-11-2018Raptor Engineering Development Team2018-05-141-0/+10
* Delay OCC binding from host boot complete signalRaptor Engineering Development Team2018-05-141-0/+4
* Lower chassis ambient set point due to addition of averaged intake sensorsRaptor Engineering Development Team2018-05-131-1/+1
* Add CPU1 ambient sensor and PCIe ambient sensor to fan control ambient temper...Raptor Engineering Development Team2018-05-131-0/+2
* Add CPU1 ambient sensor to IPMI SDR on Talos IIRaptor Engineering Development Team2018-05-132-0/+23
* Remove unneccessary fan speed maps for chassis fansRaptor Engineering Development Team2018-05-131-16/+2
* Fix ambient temperature sensor mappings on Talos IIRaptor Engineering Development Team2018-05-131-2/+3
* Attempt to detect host power down if watchdog failsRaptor Engineering Development Team2018-05-131-0/+18
* Tweak chassis fan PID controls again to mitigate integrator wind-upRaptor Engineering Development Team2018-05-121-2/+2
* Do not attempt to bind OCC drivers until IPL is completeRaptor Engineering Development Team2018-05-121-0/+8
* Load final manufacturer ID and device ID data into IPMI data fieldsRaptor Engineering Development Team2018-05-111-1/+1
* Add support for secondary PCIe region ambient temperature sensor on Talos II ...Raptor Engineering Development Team2018-05-093-0/+26
* Add initial IPMI sensor mappings for Talos IIRaptor Engineering Development Team2018-05-096-0/+1865
* FRU: Add Entity ID in the host FRU inventory yamlRatan Gupta2018-05-081-0/+6
* Add missing mutability attributes to IPMI inventory YAMLRaptor Engineering Development Team2018-05-081-0/+71
* Update IPMI YAML from Romulus sourceRaptor Engineering Development Team2018-05-081-437/+499
* sensor: Modify config for sensor to add additional fieldsTom Joseph2018-05-082-0/+7
* Bring boot VDN in line with values in datasheetRaptor Engineering Development Team2018-05-081-1/+1
* Fix power sequencing on Talos II.Brandon Bergren2018-05-082-0/+4
* Tweak chassis fan PID tuningRaptor Engineering Development Team2018-05-071-2/+2
* Remove broken ASpeed PWM fan and tach driver tie-inRaptor Engineering Development Team2018-05-072-2/+0
* Back off chassis fan proportional constantraptor-v1.0405-04-2018Raptor Engineering Development Team2018-05-041-1/+1
* Lower chassis fan floor maps slightly to reduce unneccessary fan noise under ...Raptor Engineering Development Team2018-05-041-7/+7
* Switch to PID control of main fansRaptor Engineering Development Team2018-04-291-62/+65
* Wait 5 seconds for fans to reach full speed after fan controller initRaptor Engineering Development Team2018-04-281-1/+1
* Update fan monitor YAML to new syntaxRaptor Engineering Development Team2018-04-281-1/+7
* Update fan event YAML to new syntaxRaptor Engineering Development Team2018-04-281-193/+225
* Make decrease symmetric with increaseRaptor Engineering Development Team2018-04-282-12/+12
* Don't set zone 2 to high speed when fewer than 4 chassis fans are installed, ...Raptor Engineering Development Team2018-04-281-76/+0
* Tighten up fan response againRaptor Engineering Development Team2018-04-282-15/+15
* Switch openpower-dbus-interfaces to Raptor Computing Systems GIT repositoryRaptor Engineering Development Team2018-04-281-1/+1
* Raise CPU core temp setpointsRaptor Engineering Development Team2018-04-202-71/+71
* Enhance OCC communication failure error recoveryRaptor Engineering Development Team2018-04-141-0/+13
* Revup pdbgRaptor Engineering Development Team2018-04-141-1/+1
* Allow the on-board VGA device to be enabled or disabled based on FPGA jumper ...Raptor Engineering Development Team2018-04-144-1/+60
* Minimize chassis fan hunting with additional fan speed floor mappings in comm...Raptor Engineering Development Team2018-02-191-7/+13
* Adjust floor threshold map to avoid chassis fan hunting at typical ambient te...Raptor Engineering Development Team2018-02-191-7/+7
* Loosen ambient temperature fan controls somewhatRaptor Engineering Development Team2018-02-191-3/+3
* Set chassis fan speeds based on on-board ambient temperature sensorRaptor Engineering Development Team2018-02-191-60/+11
OpenPOWER on IntegriCloud