diff options
Diffstat (limited to 'import-layers/yocto-poky/meta/recipes-core/initrdscripts/files/init-install-testfs.sh')
| -rw-r--r-- | import-layers/yocto-poky/meta/recipes-core/initrdscripts/files/init-install-testfs.sh | 220 |
1 files changed, 0 insertions, 220 deletions
diff --git a/import-layers/yocto-poky/meta/recipes-core/initrdscripts/files/init-install-testfs.sh b/import-layers/yocto-poky/meta/recipes-core/initrdscripts/files/init-install-testfs.sh deleted file mode 100644 index ac6216052..000000000 --- a/import-layers/yocto-poky/meta/recipes-core/initrdscripts/files/init-install-testfs.sh +++ /dev/null @@ -1,220 +0,0 @@ -#!/bin/sh -e -# -# Copyright (C) 2008-2011 Intel -# -# install.sh [device_name] [rootfs_name] [video_mode] [vga_mode] -# - -PATH=/sbin:/bin:/usr/sbin:/usr/bin - -# We need 20 Mb for the boot partition -boot_size=200 - -# 50% for the the test partition -testfs_ratio=50 - -# Get a list of hard drives -hdnamelist="" -live_dev_name=${1%%/*} - -echo "Searching for hard drives ..." - -for device in `ls /sys/block/`; do - case $device in - loop*) - # skip loop device - ;; - ram*) - # skip ram device - ;; - *) - # skip the device LiveOS is on - # Add valid hard drive name to the list - if [ $device != $live_dev_name -a -e /dev/$device ]; then - hdnamelist="$hdnamelist $device" - fi - ;; - esac -done - -TARGET_DEVICE_NAME="" -for hdname in $hdnamelist; do - # Display found hard drives and their basic info - echo "-------------------------------" - echo /dev/$hdname - if [ -r /sys/block/$hdname/device/vendor ]; then - echo -n "VENDOR=" - cat /sys/block/$hdname/device/vendor - fi - echo -n "MODEL=" - cat /sys/block/$hdname/device/model - cat /sys/block/$hdname/device/uevent - echo - # Get user choice - while true; do - echo -n "Do you want to install this image there? [y/n] " - read answer - if [ "$answer" = "y" -o "$answer" = "n" ]; then - break - fi - echo "Please answer y or n" - done - if [ "$answer" = "y" ]; then - TARGET_DEVICE_NAME=$hdname - break - fi -done - -if [ -n "$TARGET_DEVICE_NAME" ]; then - echo "Installing image on /dev/$TARGET_DEVICE_NAME ..." -else - echo "No hard drive selected. Installation aborted." - exit 1 -fi - -device=$TARGET_DEVICE_NAME - -# -# The udev automounter can cause pain here, kill it -# -rm -f /etc/udev/rules.d/automount.rules -rm -f /etc/udev/scripts/mount* - -# -# Unmount anything the automounter had mounted -# -umount /dev/${device}* 2> /dev/null || /bin/true - -if [ ! -b /dev/loop0 ] ; then - mknod /dev/loop0 b 7 0 -fi - -mkdir -p /tmp -if [ ! -L /etc/mtab ]; then - cat /proc/mounts > /etc/mtab -fi - -disk_size=$(parted /dev/${device} unit mb print | grep Disk | cut -d" " -f 3 | sed -e "s/MB//") - -testfs_size=$((disk_size*testfs_ratio/100)) -rootfs_size=$((disk_size-boot_size-testfs_size)) - -rootfs_start=$((boot_size)) -rootfs_end=$((rootfs_start+rootfs_size)) -testfs_start=$((rootfs_end)) - -# MMC devices are special in a couple of ways -# 1) they use a partition prefix character 'p' -# 2) they are detected asynchronously (need rootwait) -rootwait="" -part_prefix="" -if [ ! "${device#mmcblk}" = "${device}" ]; then - part_prefix="p" - rootwait="rootwait" -fi -bootfs=/dev/${device}${part_prefix}1 -rootfs=/dev/${device}${part_prefix}2 -testfs=/dev/${device}${part_prefix}3 - -echo "*****************" -echo "Boot partition size: $boot_size MB ($bootfs)" -echo "Rootfs partition size: $rootfs_size MB ($rootfs)" -echo "Testfs partition size: $testfs_size MB ($testfs)" -echo "*****************" -echo "Deleting partition table on /dev/${device} ..." -dd if=/dev/zero of=/dev/${device} bs=512 count=2 - -echo "Creating new partition table on /dev/${device} ..." -parted /dev/${device} mklabel msdos - -echo "Creating boot partition on $bootfs" -parted /dev/${device} mkpart primary 0% $boot_size - -echo "Creating rootfs partition on $rootfs" -parted /dev/${device} mkpart primary $rootfs_start $rootfs_end - -echo "Creating testfs partition on $testfs" -parted /dev/${device} mkpart primary $testfs_start 100% - -parted /dev/${device} print - -echo "Formatting $bootfs to ext3..." -mkfs.ext3 -L "boot" $bootfs - -echo "Formatting $rootfs to ext3..." -mkfs.ext3 -L "rootfs" $rootfs - -echo "Formatting $testfs to ext3..." -mkfs.ext3 -L "testrootfs" $testfs - -mkdir /tgt_root -mkdir /src_root -mkdir -p /boot - -# Handling of the target root partition -mount $rootfs /tgt_root -mount -o rw,loop,noatime,nodiratime /run/media/$1/$2 /src_root - -echo "Copying rootfs files..." -cp -a /src_root/* /tgt_root - -touch /tgt_root/etc/masterimage - -if [ -d /tgt_root/etc/ ] ; then - echo "$bootfs /boot ext3 defaults 1 2" >> /tgt_root/etc/fstab - # We dont want udev to mount our root device while we're booting... - if [ -d /tgt_root/etc/udev/ ] ; then - echo "/dev/${device}" >> /tgt_root/etc/udev/mount.blacklist - fi -fi -umount /tgt_root -umount /src_root - -# Handling of the target boot partition -mount $bootfs /boot -echo "Preparing boot partition..." -if [ -f /etc/grub.d/00_header ] ; then - echo "Preparing custom grub2 menu..." - GRUBCFG="/boot/grub/grub.cfg" - mkdir -p $(dirname $GRUBCFG) - cat >$GRUBCFG <<_EOF -serial --speed=115200 --unit=0 --word=8 --parity=no --stop=1 -terminal_input --append serial -terminal_output --append serial -set timeout_style=hidden -set timeout=5 -menuentry "Linux" { - set root=(hd0,1) - linux /vmlinuz root=$rootfs $rootwait rw $5 $3 $4 quiet -} -_EOF - # Add the test label - echo -ne "\nmenuentry 'test' --hotkey x {\nlinux /test-kernel root=$testfs rw $rootwait quiet\n}\n" >> $GRUBCFG - - chmod 0444 $GRUBCFG -fi -grub-install /dev/${device} -echo "(hd0) /dev/${device}" > /boot/grub/device.map - -# If grub.cfg doesn't exist, assume GRUB 0.97 and create a menu.lst -if [ ! -f /boot/grub/grub.cfg ] ; then - echo "Preparing custom grub menu..." - echo "default 0" > /boot/grub/menu.lst - echo "timeout 30" >> /boot/grub/menu.lst - echo "title Live Boot/Install-Image" >> /boot/grub/menu.lst - echo "root (hd0,0)" >> /boot/grub/menu.lst - echo "kernel /vmlinuz root=$rootfs rw $3 $4 quiet" >> /boot/grub/menu.lst -fi - -cp /run/media/$1/vmlinuz /boot/ - -umount /boot - -sync - -echo "Remove your installation media, and press ENTER" - -read enter - -echo "Rebooting..." -reboot -f |
