diff options
Diffstat (limited to 'import-layers/yocto-poky/meta/recipes-connectivity/dhcp/files')
9 files changed, 304 insertions, 0 deletions
diff --git a/import-layers/yocto-poky/meta/recipes-connectivity/dhcp/files/default-relay b/import-layers/yocto-poky/meta/recipes-connectivity/dhcp/files/default-relay new file mode 100644 index 000000000..7961f014b --- /dev/null +++ b/import-layers/yocto-poky/meta/recipes-connectivity/dhcp/files/default-relay @@ -0,0 +1,12 @@ +# Defaults for dhcp-relay initscript +# sourced by /etc/init.d/dhcp-relay + +# What servers should the DHCP relay forward requests to? +# e.g: SERVERS="192.168.0.1" +SERVERS="" + +# On what interfaces should the DHCP relay (dhrelay) serve DHCP requests? +INTERFACES="" + +# Additional options that are passed to the DHCP relay daemon? +OPTIONS="" diff --git a/import-layers/yocto-poky/meta/recipes-connectivity/dhcp/files/default-server b/import-layers/yocto-poky/meta/recipes-connectivity/dhcp/files/default-server new file mode 100644 index 000000000..0385d1699 --- /dev/null +++ b/import-layers/yocto-poky/meta/recipes-connectivity/dhcp/files/default-server @@ -0,0 +1,7 @@ +# Defaults for dhcp initscript +# sourced by /etc/init.d/dhcp-server +# installed at /etc/default/dhcp-server by the maintainer scripts + +# On what interfaces should the DHCP server (dhcpd) serve DHCP requests? +# Separate multiple interfaces with spaces, e.g. "eth0 eth1". +INTERFACES="" diff --git a/import-layers/yocto-poky/meta/recipes-connectivity/dhcp/files/dhclient.conf b/import-layers/yocto-poky/meta/recipes-connectivity/dhcp/files/dhclient.conf new file mode 100644 index 000000000..0e6dcf96c --- /dev/null +++ b/import-layers/yocto-poky/meta/recipes-connectivity/dhcp/files/dhclient.conf @@ -0,0 +1,50 @@ +# Configuration file for /sbin/dhclient, which is included in Debian's +# dhcp3-client package. +# +# This is a sample configuration file for dhclient. See dhclient.conf's +# man page for more information about the syntax of this file +# and a more comprehensive list of the parameters understood by +# dhclient. +# +# Normally, if the DHCP server provides reasonable information and does +# not leave anything out (like the domain name, for example), then +# few changes must be made to this file, if any. +# + +#send host-name "andare.fugue.com"; +#send dhcp-client-identifier 1:0:a0:24:ab:fb:9c; +#send dhcp-lease-time 3600; +#supersede domain-name "fugue.com home.vix.com"; +#prepend domain-name-servers 127.0.0.1; +request subnet-mask, broadcast-address, time-offset, routers, + domain-name, domain-name-servers, host-name, + netbios-name-servers, netbios-scope; +#require subnet-mask, domain-name-servers; +#timeout 60; +#retry 60; +#reboot 10; +#select-timeout 5; +#initial-interval 2; +#script "/etc/dhcp3/dhclient-script"; +#media "-link0 -link1 -link2", "link0 link1"; +#reject 192.33.137.209; + +#alias { +# interface "eth0"; +# fixed-address 192.5.5.213; +# option subnet-mask 255.255.255.255; +#} + +#lease { +# interface "eth0"; +# fixed-address 192.33.137.200; +# medium "link0 link1"; +# option host-name "andare.swiftmedia.com"; +# option subnet-mask 255.255.255.0; +# option broadcast-address 192.33.137.255; +# option routers 192.33.137.250; +# option domain-name-servers 127.0.0.1; +# renew 2 2000/1/12 00:00:01; +# rebind 2 2000/1/12 00:00:01; +# expire 2 2000/1/12 00:00:01; +#} diff --git a/import-layers/yocto-poky/meta/recipes-connectivity/dhcp/files/dhcpd.conf b/import-layers/yocto-poky/meta/recipes-connectivity/dhcp/files/dhcpd.conf new file mode 100644 index 000000000..0001c0f00 --- /dev/null +++ b/import-layers/yocto-poky/meta/recipes-connectivity/dhcp/files/dhcpd.conf @@ -0,0 +1,108 @@ +# +# Sample configuration file for ISC dhcpd for Debian +# +# $Id: dhcpd.conf,v 1.1.1.1 2002/05/21 00:07:44 peloy Exp $ +# + +# The ddns-updates-style parameter controls whether or not the server will +# attempt to do a DNS update when a lease is confirmed. We default to the +# behavior of the version 2 packages ('none', since DHCP v2 didn't +# have support for DDNS.) +ddns-update-style none; + +# option definitions common to all supported networks... +option domain-name "example.org"; +option domain-name-servers ns1.example.org, ns2.example.org; + +default-lease-time 600; +max-lease-time 7200; + +# If this DHCP server is the official DHCP server for the local +# network, the authoritative directive should be uncommented. +#authoritative; + +# Use this to send dhcp log messages to a different log file (you also +# have to hack syslog.conf to complete the redirection). +log-facility local7; + +# No service will be given on this subnet, but declaring it helps the +# DHCP server to understand the network topology. + +#subnet 10.152.187.0 netmask 255.255.255.0 { +#} + +# This is a very basic subnet declaration. + +#subnet 10.254.239.0 netmask 255.255.255.224 { +# range 10.254.239.10 10.254.239.20; +# option routers rtr-239-0-1.example.org, rtr-239-0-2.example.org; +#} + +# This declaration allows BOOTP clients to get dynamic addresses, +# which we don't really recommend. + +#subnet 10.254.239.32 netmask 255.255.255.224 { +# range dynamic-bootp 10.254.239.40 10.254.239.60; +# option broadcast-address 10.254.239.31; +# option routers rtr-239-32-1.example.org; +#} + +# A slightly different configuration for an internal subnet. +#subnet 10.5.5.0 netmask 255.255.255.224 { +# range 10.5.5.26 10.5.5.30; +# option domain-name-servers ns1.internal.example.org; +# option domain-name "internal.example.org"; +# option routers 10.5.5.1; +# option broadcast-address 10.5.5.31; +# default-lease-time 600; +# max-lease-time 7200; +#} + +# Hosts which require special configuration options can be listed in +# host statements. If no address is specified, the address will be +# allocated dynamically (if possible), but the host-specific information +# will still come from the host declaration. + +#host passacaglia { +# hardware ethernet 0:0:c0:5d:bd:95; +# filename "vmunix.passacaglia"; +# server-name "toccata.fugue.com"; +#} + +# Fixed IP addresses can also be specified for hosts. These addresses +# should not also be listed as being available for dynamic assignment. +# Hosts for which fixed IP addresses have been specified can boot using +# BOOTP or DHCP. Hosts for which no fixed address is specified can only +# be booted with DHCP, unless there is an address range on the subnet +# to which a BOOTP client is connected which has the dynamic-bootp flag +# set. +#host fantasia { +# hardware ethernet 08:00:07:26:c0:a5; +# fixed-address fantasia.fugue.com; +#} + +# You can declare a class of clients and then do address allocation +# based on that. The example below shows a case where all clients +# in a certain class get addresses on the 10.17.224/24 subnet, and all +# other clients get addresses on the 10.0.29/24 subnet. + +#class "foo" { +# match if substring (option vendor-class-identifier, 0, 4) = "SUNW"; +#} + +#shared-network 224-29 { +# subnet 10.17.224.0 netmask 255.255.255.0 { +# option routers rtr-224.example.org; +# } +# subnet 10.0.29.0 netmask 255.255.255.0 { +# option routers rtr-29.example.org; +# } +# pool { +# allow members of "foo"; +# range 10.17.224.10 10.17.224.250; +# } +# pool { +# deny members of "foo"; +# range 10.0.29.10 10.0.29.230; +# } +#} diff --git a/import-layers/yocto-poky/meta/recipes-connectivity/dhcp/files/dhcpd.service b/import-layers/yocto-poky/meta/recipes-connectivity/dhcp/files/dhcpd.service new file mode 100644 index 000000000..ae4f93eca --- /dev/null +++ b/import-layers/yocto-poky/meta/recipes-connectivity/dhcp/files/dhcpd.service @@ -0,0 +1,15 @@ +[Unit] +Description=DHCPv4 Server Daemon +Documentation=man:dhcpd(8) man:dhcpd.conf(5) +After=network.target +After=time-sync.target + +[Service] +PIDFile=@localstatedir@/run/dhcpd.pid +EnvironmentFile=@SYSCONFDIR@/default/dhcp-server +EnvironmentFile=-@SYSCONFDIR@/sysconfig/dhcp-server +ExecStartPre=@base_bindir@/touch @localstatedir@/lib/dhcp/dhcpd.leases +ExecStart=@SBINDIR@/dhcpd -f -cf @SYSCONFDIR@/dhcp/dhcpd.conf -pf @localstatedir@/run/dhcpd.pid $DHCPDARGS -q $INTERFACES + +[Install] +WantedBy=multi-user.target diff --git a/import-layers/yocto-poky/meta/recipes-connectivity/dhcp/files/dhcpd6.service b/import-layers/yocto-poky/meta/recipes-connectivity/dhcp/files/dhcpd6.service new file mode 100644 index 000000000..ca96abb83 --- /dev/null +++ b/import-layers/yocto-poky/meta/recipes-connectivity/dhcp/files/dhcpd6.service @@ -0,0 +1,15 @@ +[Unit] +Description=DHCPv6 Server Daemon +Documentation=man:dhcpd(8) man:dhcpd.conf(5) +After=network.target +After=time-sync.target + +[Service] +PIDFile=@localstatedir@/run/dhcpd6.pid +EnvironmentFile=@SYSCONFDIR@/default/dhcp-server +EnvironmentFile=-@SYSCONFDIR@/sysconfig/dhcpd6 +ExecStartPre=@base_bindir@/touch @localstatedir@/lib/dhcp/dhcpd6.leases +ExecStart=@SBINDIR@/dhcpd -f -6 -cf @SYSCONFDIR@/dhcp/dhcpd.conf -pf @localstatedir@/run/dhcpd6.pid $DHCPDARGS -q $INTERFACES + +[Install] +WantedBy=multi-user.target diff --git a/import-layers/yocto-poky/meta/recipes-connectivity/dhcp/files/dhcrelay.service b/import-layers/yocto-poky/meta/recipes-connectivity/dhcp/files/dhcrelay.service new file mode 100644 index 000000000..a2d818917 --- /dev/null +++ b/import-layers/yocto-poky/meta/recipes-connectivity/dhcp/files/dhcrelay.service @@ -0,0 +1,9 @@ +[Unit] +Description=DHCP Relay Agent Daemon +After=network.target + +[Service] +ExecStart=@SBINDIR@/dhcrelay -d --no-pid + +[Install] +WantedBy=multi-user.target diff --git a/import-layers/yocto-poky/meta/recipes-connectivity/dhcp/files/init-relay b/import-layers/yocto-poky/meta/recipes-connectivity/dhcp/files/init-relay new file mode 100644 index 000000000..019a7e84c --- /dev/null +++ b/import-layers/yocto-poky/meta/recipes-connectivity/dhcp/files/init-relay @@ -0,0 +1,44 @@ +#!/bin/sh +# +# $Id: dhcp3-relay,v 1.1 2004/04/16 15:41:08 ml Exp $ +# + +# It is not safe to start if we don't have a default configuration... +if [ ! -f /etc/default/dhcp-relay ]; then + echo "/etc/default/dhcp-relay does not exist! - Aborting..." + echo "create this file to fix the problem." + exit 1 +fi + +# Read init script configuration (interfaces the daemon should listen on +# and the DHCP server we should forward requests to.) +. /etc/default/dhcp-relay + +# Build command line for interfaces (will be passed to dhrelay below.) +IFCMD="" +if test "$INTERFACES" != ""; then + for I in $INTERFACES; do + IFCMD=${IFCMD}"-i "${I}" " + done +fi + +DHCRELAYPID=/var/run/dhcrelay.pid + +case "$1" in + start) + start-stop-daemon -S -x /usr/sbin/dhcrelay -- -q $OPTIONS $IFCMD $SERVERS + ;; + stop) + start-stop-daemon -K -x /usr/sbin/dhcrelay + ;; + restart | force-reload) + $0 stop + sleep 2 + $0 start + ;; + *) + echo "Usage: /etc/init.d/dhcp-relay {start|stop|restart|force-reload}" + exit 1 +esac + +exit 0 diff --git a/import-layers/yocto-poky/meta/recipes-connectivity/dhcp/files/init-server b/import-layers/yocto-poky/meta/recipes-connectivity/dhcp/files/init-server new file mode 100644 index 000000000..5e693adf7 --- /dev/null +++ b/import-layers/yocto-poky/meta/recipes-connectivity/dhcp/files/init-server @@ -0,0 +1,44 @@ +#!/bin/sh +# +# $Id: dhcp3-server.init.d,v 1.4 2003/07/13 19:12:41 mdz Exp $ +# + +test -f /usr/sbin/dhcpd || exit 0 + +# It is not safe to start if we don't have a default configuration... +if [ ! -f /etc/default/dhcp-server ]; then + echo "/etc/default/dhcp-server does not exist! - Aborting..." + exit 0 +fi + +# Read init script configuration (so far only interfaces the daemon +# should listen on.) +. /etc/default/dhcp-server + +case "$1" in + start) + echo -n "Starting DHCP server: " + test -d /var/lib/dhcp/ || mkdir -p /var/lib/dhcp/ + test -f /var/lib/dhcp/dhcpd.leases || touch /var/lib/dhcp/dhcpd.leases + start-stop-daemon -S -x /usr/sbin/dhcpd -- -q $INTERFACES -user dhcp -group dhcp + echo "." + ;; + stop) + echo -n "Stopping DHCP server: dhcpd3" + start-stop-daemon -K -x /usr/sbin/dhcpd + echo "." + ;; + restart | force-reload) + $0 stop + sleep 2 + $0 start + if [ "$?" != "0" ]; then + exit 1 + fi + ;; + *) + echo "Usage: /etc/init.d/dhcp-server {start|stop|restart|force-reload}" + exit 1 +esac + +exit 0 |
