yocto-poky: Move to import-layers subdir

We are going to import additional layers, so create a subdir to
hold all of the layers that we import with git-subtree.

Change-Id: I6f732153a22be8ca663035c518837e3cc5ec0799
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>

6 files changed, 131 insertions, 0 deletions

diff --git a/import-layers/yocto-poky/meta/recipes-extended/pam/libpam/pam.d/common-account b/import-layers/yocto-poky/meta/recipes-extended/pam/libpam/pam.d/common-account
new file mode 100644
index 000000000..316b17337
--- /dev/null
+++ b/import-layers/yocto-poky/meta/recipes-extended/pam/libpam/pam.d/common-account
@@ -0,0 +1,25 @@
+#
+# /etc/pam.d/common-account - authorization settings common to all services
+#
+# This file is included from other service-specific PAM config files,
+# and should contain a list of the authorization modules that define
+# the central access policy for use on the system.  The default is to
+# only deny service to users whose accounts are expired in /etc/shadow.
+#
+# As of pam 1.0.1-6, this file is managed by pam-auth-update by default.
+# To take advantage of this, it is recommended that you configure any
+# local modules either before or after the default block, and use
+# pam-auth-update to manage selection of other modules.  See
+# pam-auth-update(8) for details.
+#
+
+# here are the per-package modules (the "Primary" block)
+account	[success=1 new_authtok_reqd=done default=ignore]	pam_unix.so 
+# here's the fallback if no module succeeds
+account	requisite			pam_deny.so
+# prime the stack with a positive return value if there isn't one already;
+# this avoids us returning an error just because nothing sets a success code
+# since the modules above will each just jump around
+account	required			pam_permit.so
+# and here are more per-package modules (the "Additional" block)
+# end of pam-auth-update config
diff --git a/import-layers/yocto-poky/meta/recipes-extended/pam/libpam/pam.d/common-auth b/import-layers/yocto-poky/meta/recipes-extended/pam/libpam/pam.d/common-auth
new file mode 100644
index 000000000..460b69f19
--- /dev/null
+++ b/import-layers/yocto-poky/meta/recipes-extended/pam/libpam/pam.d/common-auth
@@ -0,0 +1,18 @@
+#
+# /etc/pam.d/common-auth - authentication settings common to all services
+#
+# This file is included from other service-specific PAM config files,
+# and should contain a list of the authentication modules that define
+# the central authentication scheme for use on the system
+# (e.g., /etc/shadow, LDAP, Kerberos, etc.).  The default is to use the
+# traditional Unix authentication mechanisms.
+
+# here are the per-package modules (the "Primary" block)
+auth	[success=1 default=ignore]	pam_unix.so nullok_secure
+# here's the fallback if no module succeeds
+auth	requisite			pam_deny.so
+# prime the stack with a positive return value if there isn't one already;
+# this avoids us returning an error just because nothing sets a success code
+# since the modules above will each just jump around
+auth	required			pam_permit.so
+# and here are more per-package modules (the "Additional" block)
diff --git a/import-layers/yocto-poky/meta/recipes-extended/pam/libpam/pam.d/common-password b/import-layers/yocto-poky/meta/recipes-extended/pam/libpam/pam.d/common-password
new file mode 100644
index 000000000..389605732
--- /dev/null
+++ b/import-layers/yocto-poky/meta/recipes-extended/pam/libpam/pam.d/common-password
@@ -0,0 +1,26 @@
+#
+# /etc/pam.d/common-password - password-related modules common to all services
+#
+# This file is included from other service-specific PAM config files,
+# and should contain a list of modules that define the services to be
+# used to change user passwords.  The default is pam_unix.
+
+# Explanation of pam_unix options:
+#
+# The "sha512" option enables salted SHA512 passwords.  Without this option,
+# the default is Unix crypt.  Prior releases used the option "md5".
+#
+# The "obscure" option replaces the old `OBSCURE_CHECKS_ENAB' option in
+# login.defs.
+#
+# See the pam_unix manpage for other options.
+
+# here are the per-package modules (the "Primary" block)
+password	[success=1 default=ignore]	pam_unix.so obscure sha512
+# here's the fallback if no module succeeds
+password	requisite			pam_deny.so
+# prime the stack with a positive return value if there isn't one already;
+# this avoids us returning an error just because nothing sets a success code
+# since the modules above will each just jump around
+password	required			pam_permit.so
+# and here are more per-package modules (the "Additional" block)
diff --git a/import-layers/yocto-poky/meta/recipes-extended/pam/libpam/pam.d/common-session b/import-layers/yocto-poky/meta/recipes-extended/pam/libpam/pam.d/common-session
new file mode 100644
index 000000000..a4a551f71
--- /dev/null
+++ b/import-layers/yocto-poky/meta/recipes-extended/pam/libpam/pam.d/common-session
@@ -0,0 +1,19 @@
+#
+# /etc/pam.d/common-session - session-related modules common to all services
+#
+# This file is included from other service-specific PAM config files,
+# and should contain a list of modules that define tasks to be performed
+# at the start and end of sessions of *any* kind (both interactive and
+# non-interactive).
+#
+
+# here are the per-package modules (the "Primary" block)
+session	[default=1]			pam_permit.so
+# here's the fallback if no module succeeds
+session	requisite			pam_deny.so
+# prime the stack with a positive return value if there isn't one already;
+# this avoids us returning an error just because nothing sets a success code
+# since the modules above will each just jump around
+session	required			pam_permit.so
+# and here are more per-package modules (the "Additional" block)
+session	required	pam_unix.so
diff --git a/import-layers/yocto-poky/meta/recipes-extended/pam/libpam/pam.d/common-session-noninteractive b/import-layers/yocto-poky/meta/recipes-extended/pam/libpam/pam.d/common-session-noninteractive
new file mode 100644
index 000000000..b110bb2b4
--- /dev/null
+++ b/import-layers/yocto-poky/meta/recipes-extended/pam/libpam/pam.d/common-session-noninteractive
@@ -0,0 +1,19 @@
+#
+# /etc/pam.d/common-session-noninteractive - session-related modules
+# common to all non-interactive services
+#
+# This file is included from other service-specific PAM config files,
+# and should contain a list of modules that define tasks to be performed
+# at the start and end of all non-interactive sessions.
+#
+
+# here are the per-package modules (the "Primary" block)
+session	[default=1]			pam_permit.so
+# here's the fallback if no module succeeds
+session	requisite			pam_deny.so
+# prime the stack with a positive return value if there isn't one already;
+# this avoids us returning an error just because nothing sets a success code
+# since the modules above will each just jump around
+session	required			pam_permit.so
+# and here are more per-package modules (the "Additional" block)
+session	required	pam_unix.so 
diff --git a/import-layers/yocto-poky/meta/recipes-extended/pam/libpam/pam.d/other b/import-layers/yocto-poky/meta/recipes-extended/pam/libpam/pam.d/other
new file mode 100644
index 000000000..ec970ecbe
--- /dev/null
+++ b/import-layers/yocto-poky/meta/recipes-extended/pam/libpam/pam.d/other
@@ -0,0 +1,24 @@
+#
+# /etc/pam.d/other - specify the PAM fallback behaviour
+#
+# Note that this file is used for any unspecified service; for example
+#if /etc/pam.d/cron  specifies no session modules but cron calls
+#pam_open_session, the session module out of /etc/pam.d/other is
+#used.  
+
+# We use pam_warn.so to generate syslog notes that the 'other'
+#fallback rules are being used (as a hint to suggest you should setup
+#specific PAM rules for the service and aid to debugging). Then to be
+#secure, deny access to all services by default. 
+
+auth       required     pam_warn.so
+auth       required     pam_deny.so
+
+account    required     pam_warn.so
+account    required     pam_deny.so
+
+password   required     pam_warn.so
+password   required     pam_deny.so
+
+session    required     pam_warn.so
+session    required     pam_deny.so