summaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/omap3-sb-t35.dtsi
blob: 22b4c8bdcc65211f9f3fa8d52caa4d5d7ed0db96 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
// SPDX-License-Identifier: GPL-2.0
/*
 * Common support for CompuLab SB-T35 used on SBC-T3530, SBC-T3517 and SBC-T3730
 */

/ {
	tfp410: encoder {
		compatible = "ti,tfp410";

		powerdown-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;  /* gpio_54 */

		pinctrl-names = "default";
		pinctrl-0 = <&tfp410_pins>;

		ports {
			#address-cells = <1>;
			#size-cells = <0>;

			port@0 {
				reg = <0>;

				tfp410_in: endpoint {
					remote-endpoint = <&dpi_out>;
				};
			};

			port@1 {
				reg = <1>;

				tfp410_out: endpoint {
					remote-endpoint = <&dvi_connector_in>;
				};
			};
		};
	};

	dvi0: connector {
		compatible = "dvi-connector";
		label = "dvi";

		port {
			dvi_connector_in: endpoint {
				remote-endpoint = <&tfp410_out>;
			};
		};
	};

	audio_amp: audio_amp {
		compatible = "regulator-fixed";
		regulator-name = "audio_amp";
		pinctrl-names = "default";
		pinctrl-0 = <&sb_t35_audio_amp>;
		gpio = <&gpio2 29 GPIO_ACTIVE_LOW>;   /* gpio_61 */
		regulator-always-on;
	};
};

&omap3_pmx_core {
	smsc2_pins: pinmux_smsc2_pins {
		pinctrl-single,pins = <
			OMAP3_CORE1_IOPAD(0x20b6, PIN_OUTPUT | MUX_MODE0)	/* gpmc_ncs4.gpmc_ncs4 */
			OMAP3_CORE1_IOPAD(0x20d2, PIN_INPUT_PULLUP | MUX_MODE4)	/* gpmc_wait3.gpio_65 */
		>;
	};

	tfp410_pins: pinmux_tfp410_pins {
		pinctrl-single,pins = <
			OMAP3_CORE1_IOPAD(0x20b4, PIN_OUTPUT | MUX_MODE4)	/* gpmc_ncs3.gpio_54 */
		>;
	};

	i2c3_pins: pinmux_i2c3_pins {
		pinctrl-single,pins = <
			OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_scl */
			OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda */
		>;
	};

	sb_t35_audio_amp: pinmux_sb_t35_audio_amp {
		pinctrl-single,pins = <
			OMAP3_CORE1_IOPAD(0x20c8, PIN_OUTPUT | MUX_MODE4) /* gpmc_nbe1.gpio_61 */
		>;
	};
};

&i2c3 {
	pinctrl-names = "default";
	pinctrl-0 = <&i2c3_pins>;

	clock-frequency = <400000>;

	at24@50 {
		compatible = "atmel,24c02";
		pagesize = <16>;
		reg = <0x50>;
	};
};

&gpmc {
	ranges = <4 0 0x2d000000 0x01000000>;

	smsc2: ethernet@4,0 {
		compatible = "smsc,lan9221", "smsc,lan9115";
		pinctrl-names = "default";
		pinctrl-0 = <&smsc2_pins>;
		interrupt-parent = <&gpio3>;
		interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
		reg = <4 0 0xff>;
		bank-width = <2>;
		gpmc,device-width = <1>;
		gpmc,cycle2cycle-samecsen = <1>;
		gpmc,cycle2cycle-diffcsen = <1>;
		gpmc,cs-on-ns = <5>;
		gpmc,cs-rd-off-ns = <150>;
		gpmc,cs-wr-off-ns = <150>;
		gpmc,adv-on-ns = <0>;
		gpmc,adv-rd-off-ns = <15>;
		gpmc,adv-wr-off-ns = <40>;
		gpmc,oe-on-ns = <45>;
		gpmc,oe-off-ns = <140>;
		gpmc,we-on-ns = <45>;
		gpmc,we-off-ns = <140>;
		gpmc,rd-cycle-ns = <155>;
		gpmc,wr-cycle-ns = <155>;
		gpmc,access-ns = <120>;
		gpmc,page-burst-access-ns = <20>;
		gpmc,bus-turnaround-ns = <75>;
		gpmc,cycle2cycle-delay-ns = <75>;
		gpmc,wait-monitoring-ns = <0>;
		gpmc,clk-activation-ns = <0>;
		gpmc,wr-data-mux-bus-ns = <0>;
		gpmc,wr-access-ns = <0>;
		vddvario-supply = <&vddvario>;
		vdd33a-supply = <&vdd33a>;
		reg-io-width = <4>;
		smsc,save-mac-address;
	};
};
OpenPOWER on IntegriCloud