summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/mediatek/mt76/mt76x0/usb.c
Commit message (Collapse)AuthorAgeFilesLines
* mt76: move mt76_get_antenna in mt76_core moduleLorenzo Bianconi2019-11-201-0/+1
| | | | | | | | | Move mt76_get_antenna in mac80211.c in order to be reused by all drivers. Initialize .get_antenna function pointer for mt76x0, mt7603, mt7615 and mt76x2u drivers Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: mt76u: rely on a dedicated stats workqueueLorenzo Bianconi2019-11-201-0/+2
| | | | | | | | | | rate controller and throughput are very sensitive to tx status timing. In order to improve performances when the system is heavily loaded, substitute stat_work delayed_work with a regular work_struct and create a mt76u dedicated workqueue for tx status reporting Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: mt76u: rely on usb_interface instead of usb_devLorenzo Bianconi2019-11-201-1/+1
| | | | | | | | | | | usb drivers are supposed to communicate using usb_interface instead mt76x{0,2}u is now registering through usb_device. Fix it by passing usb_intf device to mt76_alloc_device routine. Fixes: 112f980ac8926 ("mt76usb: use usb_dev private data") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Tested-By: Zero_Chaos <sidhayn@gmail.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: mt76x02: track approximate tx airtime for airtime fairness and surveyFelix Fietkau2019-11-201-0/+1
| | | | | | | Estimate by calculating duration for EWMA packet size + estimated A-MPDU length on tx status events Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: mt76x02: move MT_CH_TIME_CFG init to mt76x02_mac_cc_resetFelix Fietkau2019-11-201-7/+0
| | | | | | Reduces code duplication and adds missing bits for USB variants Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: track rx airtime for airtime fairness and surveyFelix Fietkau2019-11-201-0/+1
| | | | | | | | | Report total rx airtime for valid stations as BSS rx time in survey mt7615 is left out for now, it will be supported later by reading hardware counters instead of calculating airtime in software Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: mt76x02u: move mt76x02u_mac_start in mt76x02-usb moduleLorenzo Bianconi2019-11-201-1/+1
| | | | | | | | Unify mt76x02u_mac_start between mt76x2u and mt76x0u since the code is shared between both drivers Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: add default implementation for mt76_sw_scan/mt76_sw_scan_completeLorenzo Bianconi2019-09-051-1/+1
| | | | | | | | | Introduce a default implementation for mt76_sw_scan and mt76_sw_scan_complete in mt76 module and remove duplicated code since most of the drivers share the same implementation Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: mt76x02u: enable survey supportLorenzo Bianconi2019-09-051-0/+9
| | | | | | | Introduce channel survey support for mt76x2u and mt76x0u drivers Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: mt76x02: fix some checkpatch warningsRyder Lee2019-09-051-7/+9
| | | | | | | | | | | | | | | This fixes the following checkpatch warnings: ERROR: code indent should use tabs where possible CHECK: Alignment should match open parenthesis CHECK: No space is necessary after a cast CHECK: Please don't use multiple blank lines CHECK: Avoid precedence issues in macro WARNING: Statements should start on a tabstop WARNING: Unnecessary space before function pointer arguments Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: mt76x0u: add support to TP-Link T2UHPLorenzo Bianconi2019-09-051-0/+1
| | | | | | | | | Introduce support to TP-Link T2UHP https://wikidevi.com/wiki/TP-LINK_Archer_T2UHP Tested-by: Sid Hayn <sidhayn@gmail.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: mt76x0u: do not reset radio on resumeStanislaw Gruszka2019-08-201-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | On some machines mt76x0u firmware can hung during resume, what result on messages like below: [ 475.480062] mt76x0 1-8:1.0: Error: MCU response pre-completed! [ 475.990066] mt76x0 1-8:1.0: Error: send MCU cmd failed:-110 [ 475.990075] mt76x0 1-8:1.0: Error: MCU response pre-completed! [ 476.500003] mt76x0 1-8:1.0: Error: send MCU cmd failed:-110 [ 476.500012] mt76x0 1-8:1.0: Error: MCU response pre-completed! [ 477.010046] mt76x0 1-8:1.0: Error: send MCU cmd failed:-110 [ 477.010055] mt76x0 1-8:1.0: Error: MCU response pre-completed! [ 477.529997] mt76x0 1-8:1.0: Error: send MCU cmd failed:-110 [ 477.530006] mt76x0 1-8:1.0: Error: MCU response pre-completed! [ 477.824907] mt76x0 1-8:1.0: Error: send MCU cmd failed:-71 [ 477.824916] mt76x0 1-8:1.0: Error: MCU response pre-completed! [ 477.825029] usb 1-8: USB disconnect, device number 6 and possible whole system freeze. This can be avoided, if we do not perform mt76x0_chip_onoff() reset. Cc: stable@vger.kernel.org Fixes: 134b2d0d1fcf ("mt76x0: init files") Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
* Merge tag 'mt76-for-kvalo-2019-06-27' of https://github.com/nbd168/wirelessKalle Valo2019-06-301-1/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | mt76 patches for 5.3 * use NAPI polling for tx cleanup on mt7603/mt7615 * various fixes for mt7615 * unify some code between mt7603 and mt7615 * fix locking issues on mt76x02 * add support for toggling edcca on mt7603 * fix reading target tx power with ext PA on mt7603/mt7615 * fix initalizing channel maximum power * fix rate control / tx status reporting issues on mt76x02/mt7603 * add support for eeprom calibration data from mtd on mt7615 * support configuring tx power on mt7615 * fix external PA support on mt76x0 * per-chain signal reporting on mt7615 * rx/tx buffer fixes for USB devices
| * mt76: mt76u: reduce rx memory footprintLorenzo Bianconi2019-06-271-1/+1
| | | | | | | | | | | | | | | | | | | | Reduce rx memory footprint allocating just one SG buffer since for the moment we support just 3839B as maximal size of an A-MSDU. Introduce different SG_MAX_SIZE definitions for TX and RX sides. Moreover set q->buf_size to PAGE_SIZE even for SG case. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
* | treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 174Thomas Gleixner2019-05-301-9/+1
|/ | | | | | | | | | | | | | | | | | | | | | | | | | Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 655 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Richard Fontana <rfontana@redhat.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070034.575739538@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* mt76: mt76x02: remove bogus mutex usageStanislaw Gruszka2019-05-011-17/+5
| | | | | | | | | | | | mac80211 .start(), .stop() callbacks are never called concurrently with other callbacks. The only concurencly is with mt76 works which we cancel on stop() and schedule on start(). This fixes possible deadlock on cancel_delayed_work_sync(&dev->mac_work) as mac_work also take mutex. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76usb: fix tx/rx stopStanislaw Gruszka2019-05-011-7/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Disabling tasklets on stopping rx/tx is wrong. If blocked tasklet is scheduled and we remove device we will get 100% cpu usage: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 9 root 20 0 0 0 0 R 93.8 0.0 1:47.19 ksoftirqd/0 by infinite loop in tasklet_action_common() and eventuall crash on next mt76usb module load: [ 2068.591964] RIP: 0010:tasklet_action_common.isra.17+0x66/0x100 [ 2068.591966] Code: 41 89 f5 eb 25 f0 48 0f ba 33 00 0f 83 b1 00 00 00 48 8b 7a 20 48 8b 42 18 e8 56 a3 b5 00 f0 80 23 fd 48 89 ea 48 85 ed 74 53 <48> 8b 2a 48 8d 5a 08 f0 48 0f ba 6a 08 01 72 0b 8b 42 10 85 c0 74 [ 2068.591968] RSP: 0018:ffff98758c34be58 EFLAGS: 00010206 [ 2068.591969] RAX: ffff98758e6966d0 RBX: ffff98756e69aef8 RCX: 0000000000000006 [ 2068.591970] RDX: 01060a053d060305 RSI: 0000000000000006 RDI: ffff98758e6966d0 [ 2068.591971] RBP: 01060a053d060305 R08: 0000000000000000 R09: 00000000000203c0 [ 2068.591971] R10: 000003ff65b34f08 R11: 0000000000000001 R12: ffff98758e6966d0 [ 2068.591972] R13: 0000000000000006 R14: 0000000000000040 R15: 0000000000000006 [ 2068.591974] FS: 0000000000000000(0000) GS:ffff98758e680000(0000) knlGS:0000000000000000 [ 2068.591975] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 2068.591975] CR2: 00002c5f73a6cc20 CR3: 00000002f920a001 CR4: 00000000003606e0 [ 2068.591977] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 2068.591978] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 2068.591978] Call Trace: [ 2068.591985] __do_softirq+0xe3/0x30a [ 2068.591989] ? sort_range+0x20/0x20 [ 2068.591990] run_ksoftirqd+0x26/0x40 [ 2068.591992] smpboot_thread_fn+0xc5/0x160 [ 2068.591995] kthread+0x112/0x130 [ 2068.591997] ? kthread_create_on_node+0x40/0x40 [ 2068.591998] ret_from_fork+0x35/0x40 [ 2068.591999] Modules linked in: ccm arc4 fuse rfcomm cmac bnep sunrpc snd_hda_codec_hdmi snd_soc_skl snd_soc_core snd_soc_acpi_intel_match snd_hda_codec_realtek snd_soc_acpi snd_hda_codec_generic snd_soc_skl_ipc snd_soc_sst_ipc snd_soc_sst_dsp snd_hda_ext_core iTCO_wdt snd_hda_intel intel_rapl iTCO_vendor_support x86_pkg_temp_thermal intel_powerclamp btusb mei_wdt coretemp btrtl snd_hda_codec btbcm btintel intel_cstate snd_hwdep intel_uncore uvcvideo snd_hda_core videobuf2_vmalloc videobuf2_memops intel_rapl_perf wmi_bmof videobuf2_v4l2 intel_wmi_thunderbolt snd_seq bluetooth joydev videobuf2_common snd_seq_device snd_pcm videodev media i2c_i801 snd_timer idma64 ecdh_generic intel_lpss_pci intel_lpss mei_me mei ucsi_acpi typec_ucsi processor_thermal_device intel_soc_dts_iosf intel_pch_thermal typec thinkpad_acpi wmi snd soundcore rfkill int3403_thermal int340x_thermal_zone int3400_thermal acpi_thermal_rel acpi_pad pcc_cpufreq uas usb_storage crc32c_intel i915 i2c_algo_bit nvme serio_raw [ 2068.592033] drm_kms_helper e1000e nvme_core drm video ipv6 [last unloaded: cfg80211] Fortunate thing is that this not happen frequently, as scheduling tasklet on blocked state is very exceptional, though might happen. Due to different RX/TX tasklet processing fix is different for those. For RX we have to assure rx_tasklet do fail to resubmit buffers by poisoning urb's and kill the tasklet. For TX we need to handle all stop cases properly (suspend, module unload, device removal). Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: mt76x02u: remove bogus stop on suspendStanislaw Gruszka2019-05-011-1/+0
| | | | | | | | On suspend mac80211 .stop callback is called before .suspend(), so hw mac is already stopped and we do not have to do this again. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: move mac_work in mt76_devLorenzo Bianconi2019-05-011-2/+2
| | | | | | | | | Move mac_work delayed work in mt76_dev data structure since it is used by all drivers and it will be reused adding mac work to mt7615 Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: move tx tasklet to struct mt76_devFelix Fietkau2019-05-011-1/+1
| | | | | | Allows it to be scheduled from core code Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76usb: use usb_dev private dataStanislaw Gruszka2019-05-011-1/+1
| | | | | | | | | Setup usb device private data. This allows to remove mt76u_buf->dev and simplify some routines as no longer we need to get usb device through usb interface. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: unify set_timStanislaw Gruszka2019-05-011-0/+1
| | | | | | | | All mt76 drivers (now also USB drivers) require empty .set_tim callback. Add it to common mt76 module and use on all drivers. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76x02u: add mt76_release_buffered_framesStanislaw Gruszka2019-05-011-0/+1
| | | | | | | | | | Create software MT_TXQ_PSD queue for USB and map it to MT_TXQ_VO since we do not have USB endpoint for PSD. This should make mt76_release_buffered_frames() work by sending released frames via MT_TXQ_VO. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76x02u: add sta_psStanislaw Gruszka2019-05-011-0/+1
| | | | | | | | Add sta_ps callback but dont set WCID drop sicne registers for USB can not be accessed from tasklet context. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76x02u: implement beacon_opsStanislaw Gruszka2019-05-011-4/+1
| | | | | | | | | Add implementation of beacon_ops for USB and exit function to stop the timer if running when device is removed. Still no actual work on pre tbtt event. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76x02: introduce mt76x02_beacon.cStanislaw Gruszka2019-05-011-0/+2
| | | | | | | | | Move most of beaconing code into separate file and separate beacon initialization for USB and MMIO as pre TBTT implementation for USB will be different. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76x02u: check chip version on probeStanislaw Gruszka2019-03-191-3/+7
| | | | | | | | | | | | | | Since some USB device IDs are duplicated between mt76x0u, mt7601u and mt76x2u device, check chip version on probe and return error if not match the driver. Don't think this is serious issue, probe most likely will fail at some other point for wrong device, but we do not have to configure it if we know is not our device. Reported-by: Xose Vazquez Perez <xose.vazquez@gmail.com> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
* mt76usb: remove usb_mcu.cStanislaw Gruszka2019-02-261-5/+0
| | | | | | | Don't need separate file just for kmalloc/kfree. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76usb: use synchronous msg for mcu command responsesStanislaw Gruszka2019-02-261-11/+0
| | | | | | | | | | | | | | Use usb_bulk_msg for reading MCU command responses. This simplify code a lot. Together with 97a3005759c ("mt76usb: allow mt76u_bulk_msg be used for reads") it also fix possible problems with rx data buffers not being aligned and contained within single page. After doing page_frag_alloc(1024) consecutive page_frag_alloc(PAGE_SIZE) will alloc PAGE_SIZE buffer at PAGE_SIZE - 1024 offset. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: usb: move mt76u_check_sg in usb.cLorenzo Bianconi2019-02-181-1/+1
| | | | | | | | | Move mt76u_check_sg routine in usb.c and introduce sg_en variable in mt76_usb in order to check if scatter-gather is supported by mt76u layer Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76x0: remove mt76x0u_alloc_device routineLorenzo Bianconi2019-02-181-9/+13
| | | | | | | | Remove mt76x0u_alloc_device since it just runs mt76_alloc_device. Move mt76_alloc_device call in mt76x0u_probe and in mt76x0e_probe Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: run MAC work every 100msFelix Fietkau2019-02-181-1/+1
| | | | | | | ED/CCA Tx blocking checks need to be run every 100 ms in order to avoid triggering too late and keeping tx blocking on for too long Signed-off-by: Felix Fietkau <nbd@nbd.name>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers.gitKalle Valo2019-02-081-17/+29
|\ | | | | | | | | | | The series "[PATCH 0/2] mt76x0: initialize per-channel max_power" depends on commit d04ca383860b ("mt76x0u: fix suspend/resume"), so merge wireless-drivers into wireless-drivers-next to get that.
| * mt76x0u: fix suspend/resumeStanislaw Gruszka2019-02-071-17/+29
| | | | | | | | | | | | | | | | | | | | | | | | | | We need to reset MCU and do other initializations on resume otherwise MT7610U device will fail to initialize, what cause system hung due to USB requests timeouts. Patch fixes 4.19 -> 4.20 regression. Cc: stable@vger.kernel.org # 4.20+ Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
* | mt76: move mt76x02_get_txpower to mt76 coreFelix Fietkau2019-01-171-1/+1
|/ | | | | | It will be reused by mt7603 later Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: replace sta_add/remove ops with common sta_state functionFelix Fietkau2018-11-301-2/+3
| | | | | | | Allows adding unassociated stations from mac80211 Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
* mt76: move mt76x02_bss_info_changed in mt76x02-lib moduleLorenzo Bianconi2018-11-301-1/+1
| | | | | | | | Unify drv_bss_info_changed mac80211 callback and remove duplicated code in mt76x0 and mt76x2 drivers Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: move tx protection routines in mt76x02-lib moduleLorenzo Bianconi2018-11-301-1/+1
| | | | | | | | | | Move mt76x02_set_rts_threshold and mt76x02_mac_set_tx_protection routines in mt76x02-lib module and remove duplicated code in mt76x0 and mt76x2 drivers. Remove pci_mac.c and mt76x0/mac.c since now are empty files Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: move mt76x02_get_txpower in mt76x02_util.cLorenzo Bianconi2018-11-301-0/+1
| | | | | | | | Move mt76x02_get_txpower utility routine in mt76x02-lib module in order to be reused by mt76x0 and mt76x2u drivers Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: move mt76x02_sw_scan and mt76x02_sw_scan_complete in mt76x02-lib moduleLorenzo Bianconi2018-11-301-2/+2
| | | | | | | | | Move mt76x02_sw_scan and mt76x02_sw_scan_complete utility routines in mt76x02_util.c in order to be reused by mt76x0 and mt76x2u drivers and remove duplicated code Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76x0: align mt76x0u and mt76x0e fw versionLorenzo Bianconi2018-11-301-0/+2
| | | | | | | | Unify firmware version used on mt76x0e and mt76x0u drivers. Fallback to mt7610u fw if mt7610e one is not available Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: usb: fix static tracepointsLorenzo Bianconi2018-11-301-1/+0
| | | | | | | | | | Add submit_urb and rx_urb static tracepoints in mt76-usb module. Move trace_mac_txstat_fetch in mt76x02_mac_load_tx_status routine in order to be available to usb drivers. Moreover remove no longer used mt76x0/trace.{c,h} Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76x0: phy: unify calibration between mt76x0u and mt76x0eLorenzo Bianconi2018-11-301-0/+1
| | | | | | | | Align phy calibration logic between mt76x0u and mt76x0e drivers This patch improves connection stability with low SNR Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: usb: move mt76x02u_tx_complete_skb in mt76x02_usb_core.cLorenzo Bianconi2018-10-051-1/+1
| | | | | | | | Move mt76x02u_tx_complete_skb and mt76x02u_remove_dma_hdr since they are used just by usb code Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: rename mt76x02_util.h in mt76x02.hLorenzo Bianconi2018-10-051-1/+0
| | | | | | | | | Rename mt76x02_util.h header file in mt76x02.h since now contains all mt76x02 related definitions and not just utility routines declarations Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: move mt76x02_tx in mt76x02-lib moduleLorenzo Bianconi2018-10-051-1/+1
| | | | | | | | | Move mt76x02_tx shared routine in mt76x02-lib module and remove duplicated code. Moreover remove mt76x0/tx.c since it is an empty file Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: unify rxwi parsing between mt76x2 and mt76x0 driversLorenzo Bianconi2018-10-051-1/+1
| | | | | | | | | | | | | Unify rxwi parsing between mt76x2 and mt76x0. Remove the following routines: - mt76x0_phy_get_rssi - mt76x0_queue_rx_skb - mt76x0_mac_process_rx Moreover remove mt76x2/common.c and mt76x0/mac.h since are empty files Enable CCMP PN sw validation Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76x0: merge mt76x0_dev in mt76x02_devLorenzo Bianconi2018-10-051-10/+10
| | | | | | | | | | Merge mt76x0_dev data structure in mt76x02_dev one and remove duplicated code. Remove unused definition in mt76x0.h. Moreover merge mt76x0_caldata and mt76x02_rx_freq_cal data structures. This is a preliminary patch for rxwi unification. Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: usb: use mt76x02u_tx_prepare_skb to fill txwiLorenzo Bianconi2018-10-051-16/+1
| | | | | | | | | | Use mt76x02u_tx_prepare_skb routine to fill txwi in mt76x2u and mt76x0u driver and remove duplicated code. Moreover add static qualifier to mt76x02_mac_tx_rate_val and mt76x02_mac_fill_txwi routines Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76x0: usb: stop cal/mac workqueues at hw stopLorenzo Bianconi2018-10-051-3/+3
| | | | | | | | | | | Stop mac and calibration work stopping the hw even if the device has been removed Fixes: b11e19694dc9 ("mt76x0: add ieee80211_ops ops pointer to mt76x0_alloc_device signature") Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
OpenPOWER on IntegriCloud