summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/qualcomm/rmnet/rmnet_map_data.c
Commit message (Collapse)AuthorAgeFilesLines
* net: qualcomm: rmnet: Fix incorrect UL checksum offload logicSubash Abhinov Kasiviswanathan2019-07-261-4/+9
| | | | | | | | | | | | | | | | | | | The udp_ip4_ind bit is set only for IPv4 UDP non-fragmented packets so that the hardware can flip the checksum to 0xFFFF if the computed checksum is 0 per RFC768. However, this bit had to be set for IPv6 UDP non fragmented packets as well per hardware requirements. Otherwise, IPv6 UDP packets with computed checksum as 0 were transmitted by hardware and were dropped in the network. In addition to setting this bit for IPv6 UDP, the field is also appropriately renamed to udp_ind as part of this change. Fixes: 5eb5f8608ef1 ("net: qualcomm: rmnet: Add support for TX checksum offload") Cc: Sean Tranchetti <stranche@codeaurora.org> Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 284Thomas Gleixner2019-06-051-10/+1
| | | | | | | | | | | | | | | | | | | | | | | | | Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 and only version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 294 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141900.825281744@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net: qualcomm: rmnet: Add support for ethtool private statsSubash Abhinov Kasiviswanathan2018-05-161-16/+48
| | | | | | | | | | | Add ethtool private stats handler to debug the handling of packets with checksum offload header / trailer. This allows to keep track of the number of packets for which hardware computes the checksum and counts and reasons where checksum computation was skipped in hardware and was done in the network stack. Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: qualcomm: rmnet: Export mux_id and flags to netlinkSubash Abhinov Kasiviswanathan2018-03-221-1/+1
| | | | | | | | | | | | Define new netlink attributes for rmnet mux_id and flags. These flags / mux_id were earlier using vlan flags / id respectively. The flag bits are also moved to uapi and are renamed with prefix RMNET_FLAG_*. Also add the rmnet policy to handle the new netlink attributes. Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: qualcomm: rmnet: Remove unnecessary device assignmentSubash Abhinov Kasiviswanathan2018-03-221-1/+0
| | | | | | | | Device of the de-aggregated skb is correctly assigned after inspecting the mux_id, so remove the assignment in rmnet_map_deaggregate(). Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: qualcomm: rmnet: Update copyright year to 2018Subash Abhinov Kasiviswanathan2018-03-221-1/+1
| | | | | Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: qualcomm: rmnet: Add support for TX checksum offloadSubash Abhinov Kasiviswanathan2018-01-081-0/+120
| | | | | | | | | | | | | | TX checksum offload applies to TCP / UDP packets which are not fragmented using the MAPv4 checksum trailer. The following needs to be done to have checksum computed in hardware - 1. Set the checksum start offset and inset offset. 2. Set the csum_enabled bit 3. Compute and set 1's complement of partial checksum field in transport header. Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: qualcomm: rmnet: Add support for RX checksum offloadSubash Abhinov Kasiviswanathan2018-01-081-1/+185
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When using the MAPv4 packet format, receive checksum offload can be enabled in hardware. The checksum computation over pseudo header is not offloaded but the rest of the checksum computation over the payload is offloaded. This applies only for TCP / UDP packets which are not fragmented. rmnet validates the TCP/UDP checksum for the packet using the checksum from the checksum trailer added to the packet by hardware. The validation performed is as following - 1. Perform 1's complement over the checksum value from the trailer 2. Compute 1's complement checksum over IPv4 / IPv6 header and subtracts it from the value from step 1 3. Computes 1's complement checksum over IPv4 / IPv6 pseudo header and adds it to the value from step 2 4. Subtracts the checksum value from the TCP / UDP header from the value from step 3. 5. Compares the value from step 4 to the checksum value from the TCP / UDP header. 6. If the comparison in step 5 succeeds, CHECKSUM_UNNECESSARY is set and the packet is passed on to network stack. If there is a failure, then the packet is passed on as such without modifying the ip_summed field. The checksum field is also checked for UDP checksum 0 as per RFC 768 and for unexpected TCP checksum of 0. If checksum offload is disabled when using MAPv4 packet format in receive path, the packet is queued as is to network stack without the validations above. Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: qualcomm: rmnet: Remove redundant check when stamping map headerSubash Abhinov Kasiviswanathan2018-01-081-3/+0
| | | | | | | | We already check the headroom once in rmnet_map_egress_handler(), so this is not needed. Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: qualcomm: rmnet: Fix a double freeDan Carpenter2017-09-091-6/+4
| | | | | | | | | | | | There is a typo here so we accidentally free "skb" instead of "skbn". It leads to a double free and a leak. After discussing with Subash, it's better to just move the check before the allocation and avoid the need to free. Fixes: ceed73a2cf4a ("drivers: net: ethernet: qualcomm: rmnet: Initial implementation") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: qualcomm: rmnet: Rename real_dev_info to portSubash Abhinov Kasiviswanathan2017-09-031-2/+1
| | | | | | | | Make it similar to drivers like ipvlan / macvlan so it is easier to read. Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Cc: Dan Williams <dcbw@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* drivers: net: ethernet: qualcomm: rmnet: Initial implementationSubash Abhinov Kasiviswanathan2017-08-301-0/+105
RmNet driver provides a transport agnostic MAP (multiplexing and aggregation protocol) support in embedded module. Module provides virtual network devices which can be attached to any IP-mode physical device. This will be used to provide all MAP functionality on future hardware in a single consistent location. Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
OpenPOWER on IntegriCloud