summaryrefslogtreecommitdiffstats
path: root/drivers/hwtracing/coresight/coresight.c
Commit message (Collapse)AuthorAgeFilesLines
* coresight: Serialize enabling/disabling a link device.Yabin Cui2019-11-041-31/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When tracing etm data of multiple threads on multiple cpus through perf interface, some link devices are shared between paths of different cpus. It creates race conditions when different cpus wants to enable/disable the same link device at the same time. Example 1: Two cpus want to enable different ports of a coresight funnel, thus calling the funnel enable operation at the same time. But the funnel enable operation isn't reentrantable. Example 2: For an enabled coresight dynamic replicator with refcnt=1, one cpu wants to disable it, while another cpu wants to enable it. Ideally we still have an enabled replicator with refcnt=1 at the end. But in reality the result is uncertain. Since coresight devices claim themselves when enabled for self-hosted usage, the race conditions above usually make the link devices not usable after many cycles. To fix the race conditions, this patch uses spinlocks to serialize enabling/disabling link devices. Fixes: a06ae8609b3d ("coresight: add CoreSight core layer framework") Signed-off-by: Yabin Cui <yabinc@google.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: stable <stable@vger.kernel.org> # 5.3 Link: https://lore.kernel.org/r/20191104181251.26732-14-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* coresight: etm4x: Save/restore state across CPU low power statesAndrew Murray2019-11-041-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some hardware will ignore bit TRCPDCR.PU which is used to signal to hardware that power should not be removed from the trace unit. Let's mitigate against this by conditionally saving and restoring the trace unit state when the CPU enters low power states. This patchset introduces a firmware property named 'arm,coresight-loses-context-with-cpu' - when this is present the hardware state will be conditionally saved and restored. A module parameter 'pm_save_enable' is also introduced which can be configured to override the firmware property. This can be set to never allow save/restore or to conditionally allow it (only for self-hosted). The default value is determined by firmware. We avoid saving the hardware state when self-hosted coresight isn't in use to reduce PM latency - we can't determine this by reading the claim tags (TRCCLAIMCLR) as these are 'trace' registers which need power and clocking, something we can't easily provide in the PM context. Therefore we rely on the existing drvdata->mode internal state that is set when self-hosted coresight is used (and powered). Signed-off-by: Andrew Murray <andrew.murray@arm.com> Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20191104181251.26732-2-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drivers: Introduce device lookup variants by fwnodeSuzuki K Poulose2019-07-301-3/+1
| | | | | | | | | | | | | | | | | | | | | | Add a helper to match the firmware node handle of a device and provide wrappers for {bus/class/driver}_find_device() APIs to avoid proliferation of duplicate custom match functions. Cc: "David S. Miller" <davem@davemloft.net> Cc: Doug Ledford <dledford@redhat.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: linux-usb@vger.kernel.org Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: Joe Perches <joe@perches.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Joerg Roedel <joro@8bytes.org> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Acked-by: Robin Murphy <robin.murphy@arm.com> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20190723221838.12024-4-suzuki.poulose@arm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge tag 'driver-core-5.3-rc1' of ↵Linus Torvalds2019-07-121-3/+3
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core and debugfs updates from Greg KH: "Here is the "big" driver core and debugfs changes for 5.3-rc1 It's a lot of different patches, all across the tree due to some api changes and lots of debugfs cleanups. Other than the debugfs cleanups, in this set of changes we have: - bus iteration function cleanups - scripts/get_abi.pl tool to display and parse Documentation/ABI entries in a simple way - cleanups to Documenatation/ABI/ entries to make them parse easier due to typos and other minor things - default_attrs use for some ktype users - driver model documentation file conversions to .rst - compressed firmware file loading - deferred probe fixes All of these have been in linux-next for a while, with a bunch of merge issues that Stephen has been patient with me for" * tag 'driver-core-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (102 commits) debugfs: make error message a bit more verbose orangefs: fix build warning from debugfs cleanup patch ubifs: fix build warning after debugfs cleanup patch driver: core: Allow subsystems to continue deferring probe drivers: base: cacheinfo: Ensure cpu hotplug work is done before Intel RDT arch_topology: Remove error messages on out-of-memory conditions lib: notifier-error-inject: no need to check return value of debugfs_create functions swiotlb: no need to check return value of debugfs_create functions ceph: no need to check return value of debugfs_create functions sunrpc: no need to check return value of debugfs_create functions ubifs: no need to check return value of debugfs_create functions orangefs: no need to check return value of debugfs_create functions nfsd: no need to check return value of debugfs_create functions lib: 842: no need to check return value of debugfs_create functions debugfs: provide pr_fmt() macro debugfs: log errors when something goes wrong drivers: s390/cio: Fix compilation warning about const qualifiers drivers: Add generic helper to match by of_node driver_find_device: Unify the match function with class_find_device() bus_find_device: Unify the match callback with class_find_device ...
| * bus_find_device: Unify the match callback with class_find_deviceSuzuki K Poulose2019-06-241-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is an arbitrary difference between the prototypes of bus_find_device() and class_find_device() preventing their callers from passing the same pair of data and match() arguments to both of them, which is the const qualifier used in the prototype of class_find_device(). If that qualifier is also used in the bus_find_device() prototype, it will be possible to pass the same match() callback function to both bus_find_device() and class_find_device(), which will allow some optimizations to be made in order to avoid code duplication going forward. Also with that, constify the "data" parameter as it is passed as a const to the match function. For this reason, change the prototype of bus_find_device() to match the prototype of class_find_device() and adjust its callers to use the const qualifier in accordance with the new prototype of it. Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Andreas Noever <andreas.noever@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Corey Minyard <minyard@acm.org> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: David Kershner <david.kershner@unisys.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: David Airlie <airlied@linux.ie> Cc: Felipe Balbi <balbi@kernel.org> Cc: Frank Rowand <frowand.list@gmail.com> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Harald Freudenberger <freude@linux.ibm.com> Cc: Hartmut Knaack <knaack.h@gmx.de> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jonathan Cameron <jic23@kernel.org> Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: Len Brown <lenb@kernel.org> Cc: Mark Brown <broonie@kernel.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michael Jamet <michael.jamet@intel.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Peter Oberparleiter <oberpar@linux.ibm.com> Cc: Sebastian Ott <sebott@linux.ibm.com> Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Cc: Yehezkel Bernat <YehezkelShB@gmail.com> Cc: rafael@kernel.org Acked-by: Corey Minyard <minyard@acm.org> Acked-by: David Kershner <david.kershner@unisys.com> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Acked-by: Wolfram Sang <wsa@the-dreams.de> # for the I2C parts Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | coresight: Use platform agnostic namesSuzuki K Poulose2019-06-201-0/+58
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | So far we have reused the name of the "platform" device for the CoreSight device. But this is not very intuitive when we move to ACPI. Also, the ACPI device names have ":" in them (e.g, ARMHC97C:01), which the perf tool doesn't like very much. This patch introduces a generic naming scheme, givin more intuitive names for the devices that appear on the CoreSight bus. The names follow the pattern "prefix" followed by "index" (e.g, etm5). We maintain a list of allocated devices per "prefix" to make sure we don't allocate a new name when it is reprobed (e.g, due to unsatisifed device dependencies). So, we maintain the list of "fwnodes" of the parent devices to allocate a consistent name. All devices except the ETMs get an index allocated in the order of probing. ETMs get an index based on the CPU they are attached to. TMC devices are named using "tmc_etf", "tmc_etb", and "tmc_etr" prefixes depending on the configuration of the device. The replicators and funnels are not classified as dynamic/static anymore. One could easily figure that out by checking the presence of "mgmt" registers under sysfs. Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | coresight: Use fwnode handle instead of device namesSuzuki K Poulose2019-06-201-8/+34
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We rely on the device names to find a CoreSight device on the coresight bus. The device name however is obtained from the platform, which is bound to the real platform/amba device. As we are about to use different naming scheme for the coresight devices, we can't rely on the platform device name to find the corresponding coresight device. Instead we use the platform agnostic "fwnode handle" of the parent device to find the devices. We also reuse the same fwnode as the parent for the Coresight device we create. Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | coresight: Add support for releasing platform specific dataSuzuki K Poulose2019-06-201-0/+3
| | | | | | | | | | | | | | | | | | | | | | Add a helper to clean up the platform specific data provided by the firmware. This will be later used for dropping the necessary references when we switch to the fwnode handles for tracking connections. Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | coresight: Reuse platform data structure for connection trackingSuzuki K Poulose2019-06-201-23/+23
| | | | | | | | | | | | | | | | | | | | | | | | The platform specific information describes the connections and the ports of a given coresigh device. This information is also recorded in the coresight device as separate fields. Let us reuse the original platform description to streamline the handling of the data. Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | coresight: Cleanup coresight_remove_connsSuzuki K Poulose2019-06-201-2/+13
| | | | | | | | | | | | | | | | | | | | | | | | When a device is unregistered, we remove all connection references to it, by searching the connection records of all devices in the coresight bus, via coresight_remove_conns. We could avoid searching if this device doesn't have an input port (e.g, a source). Also document the purpose of the function. Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | coresight: Remove name from platform descriptionSuzuki K Poulose2019-06-201-1/+1
|/ | | | | | | | | | We are about to use a name independent of the parent AMBA device name. As such, there is no need to have it in the platform description. Let us move this to coresight description instead. Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* coresight: Move reference counting inside sink driversMathieu Poirier2019-04-251-15/+13
| | | | | | | | | | | | | | | | | | | | | | | | | When operating in CPU-wide mode with an N:1 source/sink HW topology, multiple CPUs can access a sink concurrently. As such reference counting needs to happen when the device's spinlock is held to avoid racing with other operations (start(), update(), stop()), such as: session A Session B ----- ------- enable_sink atomic_inc(refcount) = 1 ... atomic_dec(refcount) = 0 enable_sink if (refcount == 0) disable_sink atomic_inc() Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Tested-by: Leo Yan <leo.yan@linaro.org> Tested-by: Robert Walker <robert.walker@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* coresight: Adding return code to sink::disable() operationMathieu Poirier2019-04-251-1/+5
| | | | | | | | | | | | In preparation to handle device reference counting inside of the sink drivers, add a return code to the sink::disable() operation so that proper action can be taken if a sink has not been disabled. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Tested-by: Leo Yan <leo.yan@linaro.org> Tested-by: Robert Walker <robert.walker@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* coresight: Fix freeing up the coresight connectionsSuzuki K Poulose2019-04-251-1/+0
| | | | | | | | | | | | | | | | With commit c2c729415b2d2132 ("coresight: platform: Cleanup coresight connection handling"), we switched to re-using coresight_connections for the coresight_device. However, that introduced a mismatch in the alloc/free of the connections. The allocation is made using devm_*, while we use kfree() to release the memory when a device is released (even though we don't support this at the moment). Fix this by leaving it to the automatic freeing of the memory. Fixes: c2c729415b2d2132 ("coresight: platform: Cleanup coresight connection handling") Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* coresight: Use event attributes for sink selectionMathieu Poirier2019-02-061-0/+42
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch uses the information conveyed by perf_event::attr::config2 to select a sink to use for the session. That way a sink can easily be selected to be used by more than one source, something that isn't currently possible with the sysfs implementation. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-s390@vger.kernel.org Link: http://lkml.kernel.org/r/20190131184714.20388-4-mathieu.poirier@linaro.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
* coresight: perf: Add "sinks" group to PMU directoryMathieu Poirier2019-02-061-0/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a "sinks" directory entry so that users can see all the sinks available in the system in a single place. Individual sink are added as they are registered with the coresight bus. Committer tests: Test built on a ubuntu 18.04 container with a cross build environment to arm64, the new field is there, need to find a machine with this feature to do further testing in the future. root@d15263e5734a:/git/perf# grep CORESIGHT /tmp/build/v5.0-rc2+/.config CONFIG_CORESIGHT=y CONFIG_CORESIGHT_LINKS_AND_SINKS=y CONFIG_CORESIGHT_LINK_AND_SINK_TMC=y CONFIG_CORESIGHT_CATU=y CONFIG_CORESIGHT_SINK_TPIU=y CONFIG_CORESIGHT_SINK_ETBV10=y CONFIG_CORESIGHT_SOURCE_ETM4X=y CONFIG_CORESIGHT_DYNAMIC_REPLICATOR=y CONFIG_CORESIGHT_STM=y CONFIG_CORESIGHT_CPU_DEBUG=m root@d15263e5734a:/git/perf# root@d15263e5734a:/git/perf# file /tmp/build/v5.0-rc2+/drivers/hwtracing/coresight/*.o .../coresight/coresight-catu.o: ELF 64-bit MSB relocatable, ARM aarch64, version 1 (SYSV), not stripped .../coresight/coresight-cpu-debug.mod.o: ELF 64-bit MSB relocatable, ARM aarch64, version 1 (SYSV), not stripped .../coresight/coresight-cpu-debug.o: ELF 64-bit MSB relocatable, ARM aarch64, version 1 (SYSV), not stripped .../coresight/coresight-dynamic-replicator.o: ELF 64-bit MSB relocatable, ARM aarch64, version 1 (SYSV), not stripped .../coresight/coresight-etb10.o: ELF 64-bit MSB relocatable, ARM aarch64, version 1 (SYSV), not stripped .../coresight/coresight-etm-perf.o: ELF 64-bit MSB relocatable, ARM aarch64, version 1 (SYSV), not stripped .../coresight/coresight-etm4x-sysfs.o: ELF 64-bit MSB relocatable, ARM aarch64, version 1 (SYSV), not stripped .../coresight/coresight-etm4x.o: ELF 64-bit MSB relocatable, ARM aarch64, version 1 (SYSV), not stripped .../coresight/coresight-funnel.o: ELF 64-bit MSB relocatable, ARM aarch64, version 1 (SYSV), not stripped .../coresight/coresight-replicator.o: ELF 64-bit MSB relocatable, ARM aarch64, version 1 (SYSV), not stripped .../coresight/coresight-stm.o: ELF 64-bit MSB relocatable, ARM aarch64, version 1 (SYSV), not stripped .../coresight/coresight-tmc-etf.o: ELF 64-bit MSB relocatable, ARM aarch64, version 1 (SYSV), not stripped .../coresight/coresight-tmc-etr.o: ELF 64-bit MSB relocatable, ARM aarch64, version 1 (SYSV), not stripped .../coresight/coresight-tmc.o: ELF 64-bit MSB relocatable, ARM aarch64, version 1 (SYSV), not stripped .../coresight/coresight-tpiu.o: ELF 64-bit MSB relocatable, ARM aarch64, version 1 (SYSV), not stripped .../coresight/coresight.o: ELF 64-bit MSB relocatable, ARM aarch64, version 1 (SYSV), not stripped .../coresight/of_coresight.o: ELF 64-bit MSB relocatable, ARM aarch64, version 1 (SYSV), not stripped root@d15263e5734a:/git/perf# root@d15263e5734a:/git/perf# pahole -C coresight_device /tmp/build/v5.0-rc2+/drivers/hwtracing/coresight/coresight.o struct coresight_device { struct coresight_connection * conns; /* 0 8 */ int nr_inport; /* 8 4 */ int nr_outport; /* 12 4 */ enum coresight_dev_type type; /* 16 4 */ union coresight_dev_subtype subtype; /* 20 8 */ /* XXX 4 bytes hole, try to pack */ const struct coresight_ops * ops; /* 32 8 */ struct device dev; /* 40 1408 */ /* XXX last struct has 7 bytes of padding */ /* --- cacheline 22 boundary (1408 bytes) was 40 bytes ago --- */ atomic_t * refcnt; /* 1448 8 */ bool orphan; /* 1456 1 */ bool enable; /* 1457 1 */ bool activated; /* 1458 1 */ /* XXX 5 bytes hole, try to pack */ struct dev_ext_attribute * ea; /* 1464 8 */ /* size: 1472, cachelines: 23, members: 12 */ /* sum members: 1463, holes: 2, sum holes: 9 */ /* paddings: 1, sum paddings: 7 */ }; root@d15263e5734a:/git/perf# Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-s390@vger.kernel.org Link: http://lkml.kernel.org/r/20190131184714.20388-3-mathieu.poirier@linaro.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
* coresight: Add support for CLAIM tag protocolSuzuki K Poulose2018-09-251-0/+86
| | | | | | | | | | | | | | | | | | | Coresight architecture defines CLAIM tags for a device to negotiate control of the components (external agent vs self-hosted). Each device has a pair of registers (CLAIMSET & CLAIMCLR) for managing the CLAIM tags. However, the protocol for the CLAIM tags is IMPLEMENTATION DEFINED. PSCI has recommendations for the use of the CLAIM tags to negotiate controls for external agent vs self-hosted use. This patch implements the recommended protocol by PSCI. The claim/disclaim operations are performed from the device specific drivers. The disadvantage is that the calls are sprinkled in each driver, but this makes the operation much simpler. Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* coresight: Handle failures in enabling a trace pathSuzuki K Poulose2018-09-251-6/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | coresight_enable_path() enables the components in a trace path from a given source to a sink, excluding the source. The operation is performed in the reverse order; the sink first and then backwards in the list. However, if we encounter an error in enabling any of the component, we simply disable all the components in the given path irrespective of whether we enabled some of the components in the enable iteration. This could interfere with another trace session if one of the link devices is turned off (e.g, TMC-ETF). So, we need to make sure that we only disable those components which were actually enabled from the iteration. This patch achieves the same by refactoring the coresight_disable_path to accept a "node" to start from in the forward order, which can then be used from the error path of coresight_enable_path(). With this change, we don't issue a disable call back for a component which didn't get enabled. This change of behavior triggers a bug in coresight_enable_link(), where we leave the refcount on the device and will prevent the device from being enabled forever. So, we also drop the refcount in the coresight_enable_link() if the operation failed. Also, with the refactoring, we always start after the first node (which is the "SOURCE" device) for disabling the entire path. This implies, we must not find a "SOURCE" in the middle of the path. Hence, added a WARN_ON() to make sure the paths we get are sane, rather than simply ignoring them. Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* coresight: perf: Remove set_buffer call backSuzuki K Poulose2018-09-251-5/+6
| | | | | | | | | | | | | | | | In coresight perf mode, we need to prepare the sink before starting a session, which is done via set_buffer call back. We then proceed to enable the tracing. If we fail to start the session successfully, we leave the sink configuration unchanged. In order to make the operation atomic and to avoid yet another call back to clear the buffer, we get rid of the "set_buffer" call back and pass the buffer details via enable() call back to the sink. Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* coresight: Fix handling of sinksSuzuki K Poulose2018-09-251-7/+15
| | | | | | | | | | | | | | | | | | | | | | | | | The coresight components could be operated either in sysfs mode or in perf mode. For some of the components, the mode of operation doesn't matter as they simply relay the data to the next component in the trace path. But for sinks, they need to be able to provide the trace data back to the user. Thus we need to make sure that "mode" is handled appropriately. e.g, the sysfs mode could have multiple sources driving the trace data, while perf mode doesn't allow sharing the sink. The coresight_enable_sink() however doesn't really allow this check to trigger as it skips the "enable_sink" callback if the component is already enabled, irrespective of the mode. This could cause mixing of data from different modes or even same mode (in perf), if the sources are different. Also, if we fail to enable the sink while enabling a path (where sink is the first component enabled), we could end up in disabling the components in the "entire" path which were not enabled in this trial, causing disruptions in the existing trace paths. Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* coresight: platform: Cleanup coresight connection handlingSuzuki K Poulose2018-09-251-20/+1
| | | | | | | | | | | | | | | | | | | The platform code parses the component connections and populates a platform-description of the output connections in arrays of fields (which is never freed). This is later copied in the coresight_register to a newly allocated area, represented by coresight_connection(s). This patch cleans up the code dealing with connections by making use of the "coresight_connection" structure right at the platform code and lets the generic driver simply re-use information provided by the platform. Thus making it reader friendly as well as avoiding the wastage of unused memory. Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* coresight: Document error handling in coresight_registerSuzuki K Poulose2018-09-251-7/+11
| | | | | | | | | | | | | | | commit 6403587a930c ("coresight: use put_device() instead of kfree()") fixes the double freeing of resources and ensures that the device refcount is dropped properly. Add a comment to explain this to help the readers and prevent people trying to "unfix" it again. While at it, rename the labels for better readability. Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* coresight: Add helper device typeSuzuki K Poulose2018-07-151-2/+41
| | | | | | | | | | | | | | | | | | | | | | | | | Add a new coresight device type, which do not belong to any of the existing types, i.e, source, sink, link etc. A helper device could be connected to a coresight device, which could augment the functionality of the coresight device. This is intended to cover Coresight Address Translation Unit (CATU) devices, which provide improved Scatter Gather mechanism for TMC ETR. The idea is that the helper device could be controlled by the driver of the device it is attached to (in this case ETR), transparent to the generic coresight driver (and paths). The operations include enable(), disable(), both of which could accept a device specific "data" which the driving device and the helper device could share. Since they don't appear in the coresight "path" tracked by software, we have to ensure that they are powered up/down whenever the master device is turned on. Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* coresight: Handle errors in finding input/output portsSuzuki K Poulose2018-07-151-2/+5
| | | | | | | | | | | If we fail to find the input / output port for a LINK component while enabling a path, we should fail gracefully rather than assuming port "0". Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* coresight: Add helper for inserting synchronization packetsSuzuki K Poulose2018-07-151-2/+1
| | | | | | | | | | | | | Right now we open code filling the trace buffer with synchronization packets when the circular buffer wraps around in different drivers. Move this to a common place. While at it, clean up the barrier_pkt array to strip off the trailing '\0'. Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Mike Leach <mike.leach@linaro.org> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* coresight: Moving framework and drivers to SPDX identifierMathieu Poirier2018-05-141-10/+3
| | | | | | | Moving all kernel side CoreSight framework and drivers to SPDX identifier. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* coresight: use put_device() instead of kfree()Arvind Yadav2018-05-141-4/+4
| | | | | | | | | | Never directly free @dev after calling device_register(), even if it returned an error. Always use put_device() to give up the reference initialized. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* coresight: Deduplicate bus_find_device() by name matchingLukas Wunner2017-12-191-20/+5
| | | | | | | | No need to reinvent the wheel, we have bus_find_device_by_name(). Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* coresight: Add barrier packet for synchronisationMathieu Poirier2017-08-281-0/+8
| | | | | | | | | | | | | | When a buffer overflow happens the synchronisation patckets usually present at the beginning of the buffer are lost, a situation that prevents the decoder from knowing the context of the traces being decoded. This patch adds a barrier packet to be used by sink IPs when a buffer overflow condition is detected. These barrier packets are then used by the decoding library as markers to force re-synchronisation. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* coresight: Fix reference count for software sourcesSuzuki K Poulose2017-06-091-2/+13
| | | | | | | | | | | | | | | | | | For software sources (i.e STM), there could be multiple agents generating the trace data, unlike the ETMs. So we need to properly do the accounting for the active number of users to disable the device when the last user goes away. Right now, the reference counting is broken for sources as we skip the actions when we detect that the source is enabled. This patch fixes the problem by adding the refcounting for software sources, even when they are enabled. Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Reported-by: Robert Walker <robert.walker@arm.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* coresight: Disable the path only when the source is disabledSuzuki K Poulose2017-06-091-6/+13
| | | | | | | | | | | | With a coresight tracing session, the components along the path from the source to sink are disabled after the source is disabled. However, if the source was not actually disabled due to active users, we should not disable the components in the path. Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* coresight: reset "enable_sink" flag when need beMathieu Poirier2016-11-291-6/+68
| | | | | | | | | | | | | | | | | | | | | | | | | | | When using coresight from the perf interface sinks are specified as part of the perf command line. As such the sink needs to be disabled once it has been acknowledged by the coresight framework. Otherwise the sink stays enabled, which may interfere with other sessions. This patch removes the sink selection check from the build path process and make it a function on it's own. The function is then used when operating from sysFS or perf to determine what sink has been selected. If operated from perf the status of the "enable_sink" flag is reset so that concurrent session can use a different sink. When used from sysFS the status of the flag is left untouched since users have full control. The implementation doesn't handle a scenario where a sink has been enabled from sysFS and another sink is selected from the perf command line as both modes of operation are mutually exclusive. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* coresight: perf: deal with error condition properlyMathieu Poirier2016-09-091-1/+1
| | | | | | | | | Function coresight_build_path() should return -ENOMEM when kzalloc fails to allocated the requested memory. That way callers can deal with the error condition in a similar way. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* coresight: etm-perf: pass struct perf_event to source::enable/disable()Mathieu Poirier2016-08-311-1/+1
| | | | | | | | | | | | With this commit [1] address range filter information is now found in the struct hw_perf_event::addr_filters. As such pass the event itself to the coresight_source::enable/disable() functions so that both event attribute and filter can be accessible for configuration. [1] 'commit 375637bc5249 ("perf/core: Introduce address range filtering")' Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* coresight: Fix csdev connections initialisationSuzuki K Poulose2016-08-311-10/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is a cleanup patch. coresight_device->conns holds an array to point to the devices connected to the OUT ports of a component. Sinks, e.g ETR, do not have an OUT port (nr_outport = 0), as it streams the trace to memory via AXI. At coresight_register() we do : conns = kcalloc(csdev->nr_outport, sizeof(*conns), GFP_KERNEL); if (!conns) { ret = -ENOMEM; goto err_kzalloc_conns; } For ETR, since the total size requested for kcalloc is zero, the return value is, ZERO_SIZE_PTR ( != NULL). Hence, csdev->conns = ZERO_SIZE_PTR which cannot be verified later to contain a valid pointer. The code which accesses the csdev->conns is bounded by the csdev->nr_outport check, hence we don't try to dereference the ZERO_SIZE_PTR. This patch cleans up the csdev->conns initialisation to make sure we initialise it properly(i.e, either NULL or valid conns array). Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* coresight: access conn->child_name only if it's initialisedSudeep Holla2016-08-311-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If the addition of the coresight devices get deferred, then there's a window before child_name is populated by of_get_coresight_platform_data from the respective component driver's probe and the attempted to access the same from coresight_orphan_match resulting in kernel NULL pointer dereference as below: Unable to handle kernel NULL pointer dereference at virtual address 0x0 Internal error: Oops: 96000004 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 1038 Comm: kworker/0:1 Not tainted 4.7.0-rc3 #124 Hardware name: ARM Juno development board (r2) (DT) Workqueue: events amba_deferred_retry_func PC is at strcmp+0x1c/0x160 LR is at coresight_orphan_match+0x7c/0xd0 Call trace: strcmp+0x1c/0x160 bus_for_each_dev+0x60/0xa0 coresight_register+0x264/0x2e0 tmc_probe+0x130/0x310 amba_probe+0xd4/0x1c8 driver_probe_device+0x22c/0x418 __device_attach_driver+0xbc/0x158 bus_for_each_drv+0x58/0x98 __device_attach+0xc4/0x160 device_initial_probe+0x10/0x18 bus_probe_device+0x94/0xa0 device_add+0x344/0x580 amba_device_try_add+0x194/0x238 amba_deferred_retry_func+0x48/0xd0 process_one_work+0x118/0x378 worker_thread+0x48/0x498 kthread+0xd0/0xe8 ret_from_fork+0x10/0x40 This patch adds a check for non-NULL conn->child_name before accessing the same. Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* coresight: Handle build path errorSuzuki K Poulose2016-06-161-3/+6
| | | | | | | | | | | | | | | | | | | | | | | | | Enabling a component via sysfs (echo 1 > enable_source), would trigger building a path from the enabled sources to the sink. If there is an error in the process (e.g, sink not enabled or the device (CPU corresponding to ETM) is not online), we never report failure, except for leaving a message in the dmesg. Do proper error checking for the build path and return the error. Before: $ echo 0 > /sys/devices/system/cpu/cpu2/online $ echo 1 > /sys/devices/cs_etm/cpu2/enable_source $ echo $? 0 After: $ echo 0 > /sys/devices/system/cpu/cpu2/online $ echo 1 > /sys/devices/cs_etm/cpu2/enable_source -bash: echo: write error: No such device or address Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* coresight: Fix NULL pointer dereference in _coresight_build_pathSuzuki K Poulose2016-06-161-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | _coresight_build_path assumes that all the connections of a csdev has the child_dev initialised. This may not be true if the particular component is not supported by the kernel config(e.g TPIU) but is present in the DT. In which case, building a path can cause a crash like this : Unable to handle kernel NULL pointer dereference at virtual address 00000010 pgd = ffffffc9750dd000 [00000010] *pgd=00000009f5e90003, *pud=00000009f5e90003, *pmd=0000000000000000 Internal error: Oops: 96000006 [#1] PREEMPT SMP Modules linked in: CPU: 4 PID: 1348 Comm: bash Not tainted 4.6.0-next-20160517 #1646 Hardware name: ARM Juno development board (r0) (DT) task: ffffffc97517a280 ti: ffffffc9762c4000 task.ti: ffffffc9762c4000 PC is at _coresight_build_path+0x18/0xe4 LR is at _coresight_build_path+0xc0/0xe4 pc : [<ffffff80083d5130>] lr : [<ffffff80083d51d8>] pstate: 20000145 sp : ffffffc9762c7ba0 [<ffffff80083d5130>] _coresight_build_path+0x18/0xe4 [<ffffff80083d51d8>] _coresight_build_path+0xc0/0xe4 [<ffffff80083d51d8>] _coresight_build_path+0xc0/0xe4 [<ffffff80083d51d8>] _coresight_build_path+0xc0/0xe4 [<ffffff80083d51d8>] _coresight_build_path+0xc0/0xe4 [<ffffff80083d51d8>] _coresight_build_path+0xc0/0xe4 [<ffffff80083d5cdc>] coresight_build_path+0x40/0x68 [<ffffff80083d5e14>] coresight_enable+0x74/0x1bc [<ffffff80083d60a0>] enable_source_store+0x3c/0x6c [<ffffff800830b17c>] dev_attr_store+0x18/0x28 [<ffffff80081ca9c4>] sysfs_kf_write+0x40/0x50 [<ffffff80081c9e38>] kernfs_fop_write+0x140/0x1cc [<ffffff8008163ec8>] __vfs_write+0x28/0x110 [<ffffff8008164bf0>] vfs_write+0xa0/0x174 [<ffffff8008165d18>] SyS_write+0x44/0xa0 [<ffffff8008084e70>] el0_svc_naked+0x24/0x28 Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* coresight: configuring ETF in FIFO mode when acting as linkMathieu Poirier2016-05-031-4/+28
| | | | | | | | | | | When part of a path but not identified as a sink, the EFT has to be configured as a link and placed in HW FIFO mode. As such when enabling a path, call the right configuration function based on the role the ETF if playing in this trace run. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* coresight: adding path for STM deviceMathieu Poirier2016-05-031-24/+82
| | | | | | | | | | | | | | | | >From a core framework point of view an STM device is a source that is treated the same way as any other tracers. Unlike tracers though STM devices are not associated with a CPU. As such it doesn't make sense to associate the path from an STM device to its sink with a per-cpu variable as it is done for tracers. This patch simply adds another global variable to keep STM paths and the processing in coresight_enable/disable() is updated to deal with STM devices properly. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Chunyan Zhang <zhang.chunyan@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* coresight: no need to do the forced type conversionLi Pengcheng2016-05-031-2/+2
| | | | | | | | | | activated and enable are already unsigned type, no need to change them to unsigned. Signed-off-by: Li Pengcheng <lipengcheng8@huawei.com> Signed-off-by: Li Zhong <lizhong11@hisilicon.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drivers/hwtracing: make coresight-* explicitly non-modularPaul Gortmaker2016-02-201-3/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | None of the Kconfig currently controlling compilation of any of the files here are tristate, meaning that none of it currently is being built as a module by anyone. We need not be concerned about .remove functions and blocking the unbind sysfs operations, since that was already done in a recent commit. Lets remove any remaining modular references, so that when reading the drivers there is no doubt they are builtin-only. All drivers get mostly the same changes, so they are handled in batch. Changes are (1) convert to builtin_amba_driver, (2) delete module.h include where unused, and (3) relocate the description into the comments so we don't need MODULE_DESCRIPTION and associated tags. The etm3x and etm4x use module_param_named, and have been adjusted to just include moduleparam.h for that purpose. In commit f309d4443130bf814e991f836e919dca22df37ae ("platform_device: better support builtin boilerplate avoidance") we introduced the builtin_driver macro. Here we use that support and extend it to amba driver registration, so where a driver is clearly non-modular and builtin-only, we can update with the simple mapping of module_amba_driver(...) ---> builtin_amba_driver(...) Since module_amba_driver() uses the same init level priority as builtin_amba_driver() the init ordering remains unchanged with this commit. Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* coresight: etb10: adding operation mode for sink->enable()Mathieu Poirier2016-02-201-5/+5
| | | | | | | | | | | Adding an operation mode to the sink->enable() API in order to prevent simultaneous access from different callers. TPIU and TMC won't be supplemented with the AUX area API immediately and as such ignore the new mode. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* coresight: etm3x: implementing perf_enable/disable() APIMathieu Poirier2016-02-201-1/+1
| | | | | | | | That way traces can be enabled and disabled automatically from the Perf subystem using the PMU abstraction. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* coresight: etm3x: adding operation mode for etm_enable()Mathieu Poirier2016-02-201-3/+3
| | | | | | | | | | | | | Adding a new mode to source API enable() in order to distinguish where the request comes from. That way it is possible to perform different operations based on where the request was issued from. The ETM4x driver is also modified to keep in sync with the new interface. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* coresight: moving PM runtime operations to core frameworkMathieu Poirier2016-02-201-1/+8
| | | | | | | | | | | | Moving PM runtime operations in Coresight devices enable() and disable() API to the framework core when a path is setup. That way the runtime core doesn't have to be involved everytime a path is enabled. It also avoids calling runtime PM operations in IRQ context. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* coresight: add API to get sink from pathMathieu Poirier2016-02-201-0/+15
| | | | | | | | | Add an API allowing external code to quickly get a handle on the sink within a path. The sink is always last, but adding an API allows to keep the path's node structure private and remove redundant checks. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* coresight: associating path with session rather than tracerMathieu Poirier2016-02-201-95/+201
| | | | | | | | | | | | | | | | | | | | | | When using the Coresight framework from the sysFS interface a tracer is always handling a single session and as such, a path can be associated with a tracer. But when supporting multiple session per tracer there is no guarantee that sessions will always have the same path from source to sink. This patch is removing the automatic association between path and tracers. The building of a path and enablement of the components in the path are decoupled, allowing for the association of a path with a session rather than a tracer. To keep backward functionality with the current sysFS access methods a per-cpu place holder is used to keep a handle on the path built when tracers are enabled. Lastly APIs to build paths and enable tracers are made public so that other subsystem can interact with the Coresight framework. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* coresight: remove csdev's link from topologyMathieu Poirier2016-02-071-0/+46
| | | | | | | | | | In function 'coresight_unregister()', all references to the csdev that is being taken away need to be removed from the topology. Otherwise building the next coresight path from source to sink may use memory that has been released. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* coresight: release reference taken by 'bus_find_device()'Mathieu Poirier2016-02-071-0/+2
| | | | | | | | | | The reference count taken by function bus_find_device() needs to be released if a child device is found, something this patch is adding. Reported-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
OpenPOWER on IntegriCloud