summaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/amd/display/dc/dce
Commit message (Collapse)AuthorAgeFilesLines
* drm/amd/display: Check engine is not NULL before acquiringAric Cyr2020-02-111-1/+1
| | | | | | | | | | | | | [Why] Engine can be NULL in some cases, so we must not acquire it. [How] Check for NULL engine before acquiring. Signed-off-by: Aric Cyr <aric.cyr@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/amd/display: init hw i2c speedLewis Huang2020-01-222-9/+1
| | | | | | | | | | | | | | | [Why] Driver didn't init hw i2c speed cause hdcp hw cannot send command, because the default value of speed register is 0x2. [How] Restore the default speed when release i2c engine Signed-off-by: Lewis Huang <Lewis.Huang@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/amd/display: Refine i2c frequency calculating sequenceLewis Huang2020-01-221-49/+19
| | | | | | | | | | | | | | | | | [Why] In HG mode, vbios didn't call DispController_Init to program NV1x XTAL_REF_DIV value when ASIC_INIT, but driver read XTAL_REF_DIV to calculate i2c reference frequency. it cause i2c frequency change from 100kHz to 200kHz. [How] remove get_speed function and calculate reference frequency at set_speed functiton. Signed-off-by: Lewis Huang <Lewis.Huang@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/amd/display: remove psr state condition when psr exit caseLewis Huang2020-01-161-3/+0
| | | | | | | | | | | | | | | | [Why] DMCU need to wait a vblank to handle psr enter command. When psr exit coming before vblank, the psr exit command will be skip because current psr state is disable. [How] remove psr state condition when psr exit case Signed-off-by: Lewis Huang <Lewis.Huang@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/amd/display: Driverside changes to support PSR in DMCUBWyatt Wood2020-01-162-0/+267
| | | | | | | | | | | | | | | | [Why] Moving PSR from DMCU to DMCUB. [How] Add driverside PSR changes required to send inbox messages to fw. These changes are non-functional until the psr structure allocation is uncommented. Signed-off-by: Wyatt Wood <wyatt.wood@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/amdgpu/display: add fallthrough commentAlex Deucher2019-12-091-0/+1
| | | | | | | | To avoid a compiler warning. Reviewed-by: Zhan Liu <zhan.liu@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/amd/display: Increase the number of retries after AUX DEFERGeorge Shen2019-12-051-10/+22
| | | | | | | | | | | | | | | | | [Why] When a timeout occurs after a DEFER, some devices require more retries than in the case of a regular timeout. [How] In a timeout occurrence, check whether a DEFER has occurred before the timeout and retry MAX_DEFER_RETRIES retries times instead of MAX_TIMEOUT_RETRIES. Signed-off-by: George Shen <george.shen@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Abdoulaye Berthe <Abdoulaye.Berthe@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/amd/display: add separate of private hwss functionsAnthony Koo2019-12-052-2/+6
| | | | | | | | | | | | | | | | | | | | | | | | | [Why] Some function pointers in the hwss function pointer table are meant to be hw sequencer entry points to be called from dc. However some of those function pointers are not meant to be entry points, but instead used as a code reuse/inheritance tool called directly by other hwss functions, not by dc. Therefore, we want a more clear separation of which functions we determine to be interface functions vs the functions we use within hwss. [How] DC interface functions will be stored in: struct hw_sequencer_funcs Functions used within HWSS will be stored in: struct hwseq_private_funcs Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/amd/display: Clean up some code with unused registersAnthony Koo2019-11-191-2/+1
| | | | | | | | | | | | | [Why] Unused register in the code [How] Remove unused register Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/amd/display: rename DCN1_0 kconfig to DCNBhawanpreet Lakha2019-11-134-17/+17
| | | | | | | | | | | Since dcn20 and dcn21 are under dcn1 it doesnt make sense to have it named dcn1. Change it to "dcn" to make it generic Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/amd/display: Drop CONFIG_DRM_AMD_DC_DCN2_1 flagBhawanpreet Lakha2019-11-134-14/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | [Why] DCN21 is stable enough to be build by default. So drop the flags. [How] Remove them using the unifdef tool. The following commands were executed in sequence: $ find -name '*.c' -exec unifdef -m -DCONFIG_DRM_AMD_DC_DCN2_1 -UCONFIG_TRIM_DRM_AMD_DC_DCN2_1 '{}' ';' $ find -name '*.h' -exec unifdef -m -DCONFIG_DRM_AMD_DC_DCN2_1 -UCONFIG_TRIM_DRM_AMD_DC_DCN2_1 '{}' ';' In addition: * Remove from kconfig, and replace any dependencies with DCN1_0. * Remove from any makefiles. * Fix and cleanup Renoir definitions in dal_asic_id.h * Expand DCN1 ifdef to include DCN21 code in the following files: * clk_mgr/clk_mgr.c: dc_clk_mgr_create() * core/dc_resources.c: dc_create_resource_pool() * gpio/hw_factory.c: dal_hw_factory_init() * gpio/hw_translate.c: dal_hw_translate_init() Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/amd/display: Drop CONFIG_DRM_AMD_DC_DCN2_0 and DSC_SUPPORTEDBhawanpreet Lakha2019-11-139-46/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [Why] DCN2 and DSC are stable enough to be build by default. So drop the flags. [How] Remove them using the unifdef tool. The following commands were executed in sequence: $ find -name '*.c' -exec unifdef -m -DCONFIG_DRM_AMD_DC_DSC_SUPPORT -DCONFIG_DRM_AMD_DC_DCN2_0 -UCONFIG_TRIM_DRM_AMD_DC_DCN2_0 '{}' ';' $ find -name '*.h' -exec unifdef -m -DCONFIG_DRM_AMD_DC_DSC_SUPPORT -DCONFIG_DRM_AMD_DC_DCN2_0 -UCONFIG_TRIM_DRM_AMD_DC_DCN2_0 '{}' ';' In addition: * Remove from kconfig, and replace any dependencies with DCN1_0. * Remove from any makefiles. * Fix and cleanup NV defninitions in dal_asic_id.h * Expand DCN1 ifdef to include DCN2 code in the following files: * clk_mgr/clk_mgr.c: dc_clk_mgr_create() * core/dc_resources.c: dc_create_resource_pool() * dce/dce_dmcu.c: dcn20_*lock_phy() * dce/dce_dmcu.c: dcn20_funcs * dce/dce_dmcu.c: dcn20_dmcu_create() * gpio/hw_factory.c: dal_hw_factory_init() * gpio/hw_translate.c: dal_hw_translate_init() Signed-off-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/amd/display: use previous aux timeout val if no repeater.abdoulaye berthe2019-11-132-10/+38
| | | | | | | | | | | | | | | [Why] The aux timeout value is not default before reading link cap. Setting it to default when lttpr is not enabled causes some monitor not to light up. [How] Read the aux engine timeout value before setting it to extended. Set the aux engine timeout to its previous value if no lttpr. Signed-off-by: abdoulaye berthe <abdoulaye.berthe@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/amd/display: add oem i2c implemenation in dcJun Lei2019-11-133-57/+11
| | | | | | | | | | | | | | [why] Need it for some OEM I2C devices in Nv10 [how] Link up code to parse OEM table and expose DC interface to access the pins Signed-off-by: Jun Lei <Jun.Lei@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/amd/display: set MSA MISC1 bit 6 while sending colorimetry in VSC SDPAnthony Koo2019-11-131-0/+1
| | | | | | | | | | | | | | | | | | | | | [Why] It is confusing to sinks if we send VSC SDP only on some format. Today we signal colorimetry format using MSA while in formats like sRGB. But when we switch to BT2020 we set the bit to ignore MSA colorimetry and instead use the colorimetry information in the VSC SDP. But if sink supports signaling of colorimetry via VSC SDP we should always set the MSA MISC1 bit 6, instead of doing so selectively. [How] If sink supports signaling of colorimetry via VSC SDP, and we are sending the colorimetry info via VSC SDP with packet revision 05h, then always set MSA MISC1 bit 6. Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/amd/display: Add PSP FW version mask.Yongqiang Sun2019-11-131-1/+1
| | | | | | | | | | | | | | | | | | [Why] PSP version format is AB.CD.EF.GH, where CD and GH is the main version. current psp version check for dmcub loading dmcu check 0x00110029, in case of some psp version eg: 0x00110227 which main version should be 0x00110027, will result in unexpeceted dmcub loading dmcu FW. [How] Add psp version mask 0x00FF00FF for checking version. Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Hersen Wu <hersenxs.wu@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/amd/display: Change dmcu init sequence for dmcub loading dmcu FW.Yongqiang Sun2019-11-132-0/+92
| | | | | | | | | | | | | | | | [Why] DMCU isn't intiliazed properly by dmcub loading due to dmcub initialize sequence. [How] Change dmcu init sequece to meet dmcub initilize. Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Hersen Wu <hersenxs.wu@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/amd/display: remove gcc warning Wunused-but-set-variableChenwandun2019-10-281-5/+0
| | | | | | | | drivers/gpu/drm/amd/display/dc/dce/dce_aux.c: In function dce_aux_configure_timeout: drivers/gpu/drm/amd/display/dc/dce/dce_aux.c: warning: variable timeout set but not used [-Wunused-but-set-variable] Signed-off-by: Chenwandun <chenwandun@huawei.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/amdgpu: Add DC feature mask to disable fractional pwmLeo Li2019-10-251-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | [Why] Some LED panel drivers might not like fractional PWM. In such cases, backlight flickering may be observed. [How] Add a DC feature mask to disable fractional PWM, and associate it with the preexisting dc_config flag. The flag is only plumbed through the dmcu firmware, so plumb it through the driver path as well. To disable, add the following to the linux cmdline: amdgpu.dcfeaturemask=0x4 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=204957 Signed-off-by: Leo Li <sunpeng.li@amd.com> Reviewed-by: Anthony Koo <anthony.koo@amd.com> Tested-by: Lukáš Krejčí <lskrejci@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/amd/display: Proper return of result when aux engine acquire failsAnthony Koo2019-10-251-1/+4
| | | | | | | | | | | | | | | | [Why] When aux engine acquire fails, we missed populating the operation_result that describes the failure reason. [How] Set operation_result to new type: AUX_CHANNEL_OPERATION_FAILED_ENGINE_ACQUIRE in the case aux engine acquire has failed. Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/amd/display: Add renoir hw_seqBhawanpreet Lakha2019-10-171-0/+1
| | | | | | | | | This change adds renoir hw_seq, needed to do renoir specific hw programing Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Roman Li <Roman.Li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/amd/display: configurable aux timeout supportabdoulaye berthe2019-10-172-7/+82
| | | | | | | | | | | | [Description] 1-add configurable timeout support to aux engine. 2-add timeout support field to dc_caps 3-add reg_key to override extended timeout support Signed-off-by: abdoulaye berthe <abdoulaye.berthe@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Roman Li <Roman.Li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/amd/display: update register field access mechanismabdoulaye berthe2019-10-172-4/+182
| | | | | | | | | | | | 1-add timeout length and multiplier fields to aux_control1 register 2-update access mechanism from macro constructed name to uint32_t defined addresses. 3-define registers and field per asic family Signed-off-by: abdoulaye berthe <abdoulaye.berthe@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Roman Li <Roman.Li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/amd/display: make aux defer delay and aux sw start delay seperateXiaodong Yan2019-10-101-2/+9
| | | | | | | | | | | | | | | | [why] 1. defer delay and sw start delay has been mixed up, defer delay was programmed to AUX_SW_CONTROL:AUX_SW_START_DELAY. 2. There's no delay for defer [how] 1. Set aux sw start to 0 2. Add delay for defer scenario Signed-off-by: Xiaodong Yan <Xiaodong.Yan@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/amd/display: wait for set pipe mcp command completionJosip Pavic2019-10-101-0/+3
| | | | | | | | | | | | | | | | | [Why] When the driver sends a pipe set command to the DMCU FW, it does not wait for the command to complete. This can lead to unpredictable behavior if, for example, the driver were to request a pipe disable to the FW via MCP, then power down some hardware before the firmware has completed processing the command. [How] Wait for the DMCU FW to finish processing set pipe commands Signed-off-by: Josip Pavic <Josip.Pavic@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/amd/display: rename variable eanble -> enableColin Ian King2019-09-161-4/+4
| | | | | | | | There is a spelling mistake in the variable name eanble, rename it to enable. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/amd/display: dce11.x /dce12 update formula inputCharlene Liu2019-09-131-2/+2
| | | | | | | | | | | [Description] 1. OUTSTANDING_REQUEST_LIMIT update from 0xFF to 0x1F (HW doc update) 2. using memory type to convert UMC's MCLK to Yclk. Signed-off-by: Charlene Liu <charlene.liu@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/amd/display: remove hw access from dc_destroyJun Lei2019-09-132-6/+0
| | | | | | | | | | | | | | | | | | [why] dc_destroy should only clean up SW, this is because GPUs may be removed before driver unload, leading to HW to be unavailable. [how] remove GPIO close as part of GPIO destroy, this is unnecessary because GPIO is not shared, and GPIOs are generally closed after being opened Add tracking to HW access during destructor to make future issues easier to pinpoint, and block access to prevent hangs. Signed-off-by: Jun Lei <Jun.Lei@amd.com> Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/amd/display: Fix register namesBhawanpreet Lakha2019-08-291-2/+2
| | | | | | | | | rename VM_CONTEXT0 to MMVM_CONTEXT0 as that is the name defined in the register files Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/amd/display: Add Renoir hw_seq register listBhawanpreet Lakha2019-08-291-0/+97
| | | | | | | | | These are the registers used to for the hw sequences for modesetting. Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/amd/display: Add Renoir clock registers listBhawanpreet Lakha2019-08-291-0/+17
| | | | | | | | These are the registers used to program the clock hw. Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/amd/display: Properly read LVTMA_PWRSEQ_CNTLJoshua Aberback2019-08-231-26/+17
| | | | | | | | | | | | | | | | [Why] The register LVTMA_PWRSEQ_CNTL is used to determine the power state of the embedded display. Currently we do not actually read this register's values, so during power down we think that this display is already off, so we skip calling into VBIOS to actually turn it off. [How] - add relevant fields to shift / mask initialization Signed-off-by: Joshua Aberback <joshua.aberback@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/amd/display: Use res_cap to acquire i2c instead of pipe countDerek Lai2019-08-231-1/+2
| | | | | | | | | | | | | | [Why] We should be using the ddc_num from res_caps. As the pipe count != number of i2c resources. [How] Use ddc_num from res_cap instead of pipe count. Signed-off-by: Derek Lai <Derek.Lai@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/amd/display: support spdifCharlene Liu2019-08-231-2/+2
| | | | | | | | | | | | | [Description] port spdif fix to staging: spdif hardwired to afmt inst 1. spdif func pointer spdif resource allocation (reserve last audio endpoint for spdif only) Signed-off-by: Charlene Liu <charlene.liu@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/amd/display: fix calc_pll_max_vco_constructDmytro Laktyushkin2019-08-221-1/+1
| | | | | | | | | | | This was broken by a previous change switching to cached fw_info. Fixed by inverting a valid bool check. Bug: https://bugs.freedesktop.org/show_bug.cgi?id=111432 Fixes: 9adc8050bf3c ("drm/amd/display: make firmware info only load once during dc_bios create") Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/amd/display: fix a potential null pointer dereferenceColin Ian King2019-08-221-1/+2
| | | | | | | | | | | | | Currently the pointer init_data is dereferenced on the assignment of fw_info before init_data is sanity checked to see if it is null. Fix te potential null pointer dereference on init_data by only performing dereference after it is null checked. Addresses-Coverity: ("Dereference before null check") Fixes: 9adc8050bf3c ("drm/amd/display: make firmware info only load once during dc_bios create") Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/amd/display: enabling seamless boot sequence for dcn2Martin Leung2019-08-152-1/+14
| | | | | | | | | | | | | | | | | [Why] Seamless boot (building SW state inheriting BIOS-initialized timing) was enabled on DCN2, including fixes [How] Includes fixes for MPC, DPPCLK, and DIG FE mapping/OTG source select/ Pixel clock. This is part 2 of 2 for seamless boot NV10 Signed-off-by: Martin Leung <martin.leung@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/amd/display: make firmware info only load once during dc_bios createDmytro Laktyushkin2019-08-152-32/+13
| | | | | | | | | | | | | | | Currently every time DC wants to access firmware info we make a call into VBIOS. This makes no sense as there is nothing that can change runtime inside fw info and can cause issues when calling unstable bios during bringup. This change eliminate this behavior by only calling bios once for fw info and keeping it stored as part of dc_bios. Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Chris Park <Chris.Park@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/amd/display: reset hdmi tmds rate and data scramble on pipe resetWenjing Liu2019-08-151-0/+19
| | | | | | | | | | | | | [why] hdmi data scramble and tmds rate is not reset during pipe reset. [how] reset hdmi tmds rate and data scramble on pipe reset Signed-off-by: Wenjing Liu <Wenjing.Liu@amd.com> Reviewed-by: Chris Park <Chris.Park@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/amd/display: Add PIXEL_RATE control regs for more instancesYongqiang Sun2019-08-151-5/+20
| | | | | | | | | | For use by future ASICs Signed-off-by: Sung Lee <sung.lee@amd.com> Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com> Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/amd/display: Fix a typo - dce_aduio_mask --> dce_audio_maskChristophe JAILLET2019-08-122-4/+4
| | | | | | | This should be 'dce_audio_mask', not 'dce_aduio_mask'. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/amd/display: avoid power gate domains that doesn't existTony Cheng2019-07-181-2/+2
| | | | | | | Signed-off-by: Tony Cheng <tony.cheng@amd.com> Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/amd/display: add dcc programming for dual planeDmytro Laktyushkin2019-07-181-5/+5
| | | | | | | | | | | | | | | | | | | Add dual plane dcc programming support for surfaces. Removes unions from plane size and dcc params as they serve no practical purpose only making our code more convoluted. This results in easy dual plane dcc and surface size programming. Temporary diags_dm code is used to handle the interface change without breaking functionality as a diags change needs to be applied after this one. Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/amd/display: Wait for backlight programming completion in set backlight ↵SivapiriyanKumarasamy2019-07-181-0/+4
| | | | | | | | | | | | | | | | | level [WHY] Currently we don't wait for blacklight programming completion in DMCU when setting backlight level. Some sequences such as PSR static screen event trigger reprogramming requires it to be complete. [How] Add generic wait for dmcu command completion in set backlight level. Signed-off-by: SivapiriyanKumarasamy <sivapiriyan.kumarasamy@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/amd/display:Use Pixel clock in 100Hz units for HDMI Audio wall clock DTONevenko Stupar2019-07-182-29/+29
| | | | | | | | | | | | | | | [Why] -Pass and use pixel clock in 100 Hz to Audio for HDMI audio DTO for Audio wall clock programming so audio DTO gets increased precision for timings with /1001 factor. -For HDMI TMDS for N and CTS ACR tables are based on 10 KHz units, these does not need to be modified as N and CTS values are still valid using current tables. Signed-off-by: Nevenko Stupar <Nevenko.Stupar@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/amd/display: Split out common HUBP registers and codeCharlene Liu2019-07-181-1/+2
| | | | | | | | | | | | There are shared regs and code across DCN generations. Pull them out into a shared common location. Also, expose some dcn20 init functions. Signed-off-by: Charlene Liu <charlene.liu@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/amd/display: Add aux tracing log in dceChiawen Huang2019-07-181-1/+8
| | | | | | | | | | | | | [Why] dce was re-arch'd, therefore adding aux tracing log into new dce [How] The porting from submit_channel_request/process_channel_reply of aux_engine_dce110.c Signed-off-by: Chiawen Huang <chiawen.huang@amd.com> Reviewed-by: Tony Cheng <tong.cheng@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* Merge branch 'drm-next' into drm-next-5.3Alex Deucher2019-06-2512-1/+991
|\ | | | | | | | | | | Backmerge drm-next and fix up conflicts due to drmP.h removal. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| * Merge tag 'drm-misc-next-2019-06-14' of ↵Daniel Vetter2019-06-1412-0/+990
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for v5.3: UAPI Changes: Cross-subsystem Changes: - Add code to signal all dma-fences when freed with pending signals. - Annotate reservation object access in CONFIG_DEBUG_MUTEXES Core Changes: - Assorted documentation fixes. - Use irqsave/restore spinlock to add crc entry. - Move code around to drm_client, for internal modeset clients. - Make drm_crtc.h and drm_debugfs.h self-contained. - Remove drm_fb_helper_connector. - Add bootsplash to todo. - Fix lock ordering in pan_display_legacy. - Support pinning buffers to current location in gem-vram. - Remove the now unused locking functions from gem-vram. - Remove the now unused kmap-object argument from vram helpers. - Stop checking return value of debugfs_create. - Add atomic encoder enable/disable helpers. - pass drm_atomic_state to atomic connector check. - Add atomic support for bridge enable/disable. - Add self refresh helpers to core. Driver Changes: - Add extra delay to make MTP SDM845 work. - Small fixes to virtio, vkms, sii902x, sii9234, ast, mcde, analogix, rockchip. - Add zpos and ?BGR8888 support to meson. - More removals of drm_os_linux and drmP headers for amd, radeon, sti, r128, r128, savage, sis. - Allow synopsis to unwedge the i2c hdmi bus. - Add orientation quirks for GPD panels. - Edid cleanups and fixing handling for edid < 1.2. - Add runtime pm to stm. - Handle s/r in dw-hdmi. - Add hooks for power on/off to dsi for stm. - Remove virtio dirty tracking code, done in drm core. - Rework BO handling in ast and mgag200. Tiny conflict in drivers/gpu/drm/amd/display/dc/clk_mgr/clk_mgr.c, needed #include <linux/slab.h> to make it compile. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/0e01de30-9797-853c-732f-4a5bd6e61445@linux.intel.com
| | * drm/amd: drop use of drmP.h in atom.hSam Ravnborg2019-06-101-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Drop use of the deprecated drmP.h header from atom.h Fix fallout in various files. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20190609220757.10862-6-sam@ravnborg.org
OpenPOWER on IntegriCloud