summaryrefslogtreecommitdiffstats
path: root/arch/powerpc/platforms/pseries/firmware.c
Commit message (Collapse)AuthorAgeFilesLines
* powerpc/pseries/svm: Allow IOMMU to work in SVMAlexey Kardashevskiy2020-01-061-0/+7
| | | | | | | | | | | | | | | | | | | | | H_PUT_TCE_INDIRECT uses a shared page to send up to 512 TCE to a hypervisor in a single hypercall. This does not work for secure VMs as the page needs to be shared or the VM should use H_PUT_TCE instead. This disables H_PUT_TCE_INDIRECT by clearing the FW_FEATURE_PUT_TCE_IND feature bit so SVMs will map TCEs using H_PUT_TCE. This is not a part of init_svm() as it is called too late after FW patching is done and may result in a warning like this: [ 3.727716] Firmware features changed after feature patching! [ 3.727965] WARNING: CPU: 0 PID: 1 at (...)arch/powerpc/lib/feature-fixups.c:466 check_features+0xa4/0xc0 Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: Thiago Jung Bauermann <bauerman@linux.ibm.com> Tested-by: Thiago Jung Bauermann <bauerman@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20191216041924.42318-5-aik@ozlabs.ru
* powerpc/pseries/iommu: Separate FW_FEATURE_MULTITCE to put/stuff featuresAlexey Kardashevskiy2020-01-061-1/+2
| | | | | | | | | | | | | | | | | | | | | | | H_PUT_TCE_INDIRECT allows packing up to 512 TCE updates into a single hypercall; H_STUFF_TCE can clear lots in a single hypercall too. However, unlike H_STUFF_TCE (which writes the same TCE to all entries), H_PUT_TCE_INDIRECT uses a 4K page with new TCEs. In a secure VM environment this means sharing a secure VM page with a hypervisor which we would rather avoid. This splits the FW_FEATURE_MULTITCE feature into FW_FEATURE_PUT_TCE_IND and FW_FEATURE_STUFF_TCE. "hcall-multi-tce" in the "/rtas/ibm,hypertas-functions" device tree property sets both; the "multitce=off" kernel command line parameter disables both. This should not cause behavioural change. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: Thiago Jung Bauermann <bauerman@linux.ibm.com> Tested-by: Thiago Jung Bauermann <bauerman@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20191216041924.42318-4-aik@ozlabs.ru
* treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152Thomas Gleixner2019-05-301-5/+1
| | | | | | | | | | | | | | | | | | | | | Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* powerpc/pseries: PAPR persistent memory supportOliver O'Halloran2018-10-191-0/+1
| | | | | | | | | | This patch implements support for discovering storage class memory devices at boot and for handling hotplug of new regions via RTAS hotplug events. Signed-off-by: Oliver O'Halloran <oohall@gmail.com> [mpe: Fix CONFIG_MEMORY_HOTPLUG=n build] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* powerpc/pseries/mm: Introducing FW_FEATURE_BLOCK_REMOVELaurent Dufour2018-09-171-0/+1
| | | | | | | | | | | | | This feature tells if the hcall H_BLOCK_REMOVE is available. Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by: Laurent Dufour <ldufour@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* powerpc/firmware: Add definitions for new drc-info firmware featureMichael Bringmann2018-01-211-0/+1
| | | | | | | | | | | Firmware Features: Define new bit flag representing the presence of new device tree property "ibm,drc-info". The flag is used to tell the front end processor whether the Linux kernel supports the new property, and by the front end processor to tell the Linux kernel that the new property is present in the device tree. Signed-off-by: Michael Bringmann <mwb@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* powerpc/pseries: Enable support of ibm,dynamic-memory-v2Nathan Fontenot2018-01-161-0/+1
| | | | | | | | Add required bits to the architecture vector to enable support of the ibm,dynamic-memory-v2 device tree property. Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* Merge branch 'topic/ppc-kvm' into nextMichael Ellerman2017-02-141-1/+1
|\ | | | | | | Merge the topic branch we're sharing with the kvm-ppc tree.
| * powerpc/pseries: Fixes for the "ibm,architecture-vec-5" optionsPaul Mackerras2017-01-311-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This fixes the byte index values for some of the option bits in the "ibm,architectur-vec-5" property. The "platform facilities options" bits are in byte 17 not byte 14, so the upper 8 bits of their definitions need to be 0x11 not 0x0E. The "sub processor support" option is in byte 21 not byte 15. Note none of these options are actually looked up in "ibm,architecture-vec-5" at this time, so there is no bug. When checking whether option bits are set, we should check that the offset of the byte being checked is less than the vector length that we got from the hypervisor. Signed-off-by: Paul Mackerras <paulus@ozlabs.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* | powerpc/pseries: Add hypercall wrappers for hash page table resizingDavid Gibson2017-02-091-0/+1
|/ | | | | | | | | | | | | | | This adds the hypercall numbers and wrapper functions for the hash page table resizing hypercalls. These hypercall numbers are defined in the PAPR ACR "HPT resizing option". It also adds a new firmware feature flag to track the presence of the HPT resizing calls. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* powerpc: Move FW feature probing out of pseries probe()Benjamin Herrenschmidt2016-07-211-2/+46
| | | | | | | | | We move the function itself to pseries/firmware.c and call it along with almost all other flat device-tree parsers from early_init_devtree() Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [mpe: Move #ifdefs into the header by providing pseries_probe_fw_features()] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* powerpc/pseries: Update CPU maps when device tree is updatedJesse Larrew2013-04-261-0/+1
| | | | | | | | | | | | | | | | | | | | Platform events such as partition migration or the new PRRN firmware feature can cause the NUMA characteristics of a CPU to change, and these changes will be reflected in the device tree nodes for the affected CPUs. This patch registers a handler for Open Firmware device tree updates and reconfigures the CPU and node maps whenever the associativity changes. Currently, this is accomplished by marking the affected CPUs in the cpu_associativity_changes_mask and allowing arch_update_cpu_topology() to retrieve the new associativity information using hcall_vphn(). Protecting the NUMA cpu maps from concurrent access during an update operation will be addressed in a subsequent patch in this series. Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* powerpc/pseries: Update firmware_has_feature() to check architecture vector ↵Nathan Fontenot2013-04-261-10/+39
| | | | | | | | | | | | | | | | | 5 bits The firmware_has_feature() function makes it easy to check for supported features of the hypervisor. This patch extends the capability of firmware_has_feature() to include checking for specified bits in vector 5 of the architecture vector as reported in the device tree. As part of this the #defines used for the architecture vector are re-defined such that each option has the index into vector 5 and the feature bit encoded into it. This makes checking for architecture bits when initiating data for firmware_has_feature much easier. Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* powerpc/pseries: Use ARRAY_SIZE to iterate over firmware_features_table arrayNathan Fontenot2013-04-261-5/+3
| | | | | | | | | | | | | When iterating over the entries in firmware_features_table we only need to go over the actual number of entries in the array instead of declaring it to be bigger and checking to make sure there is a valid entry in every slot. This patch removes the FIRMWARE_MAX_FEATURES #define and replaces the array looping with the use of ARRAY_SIZE(). Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* powerpc/pseries: Cleanup best_energy_hcall detectionMichael Neuling2013-01-101-0/+1
| | | | | | | | | | Currently we search for the best_energy hcall using a custom function. Move this to using the firmware_feature_table. Signed-off-by: Michael Neuling <mikey@neuling.org> cc: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> cc: Linux PPC dev <linuxppc-dev@ozlabs.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* powerpc/pseries: Allow firmware features to match partial stringsMichael Neuling2013-01-101-2/+18
| | | | | | | | | | | | | | | | This allows firmware_features_table names to add a '*' at the end so that only partial strings are matched. When a '*' is added, only upto the '*' is matched when setting firmware feature bits. This is useful for the matching best energy feature. Signed-off-by: Michael Neuling <mikey@neuling.org> cc: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> cc: Linux PPC dev <linuxppc-dev@ozlabs.org> Reviewed-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* powerpc: Add set_mode hcallIan Munsie2012-11-151-0/+1
| | | | | | | | | | This new hcall in POWER8 is used to set various resource mode registers. eg. it can set address translation mode on interrupt (note: partition wide scope) Signed-off-by: Ian Munsie <imunsie@au1.ibm.com> Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* powerpc: Add VPHN firmware featureJesse Larrew2010-11-291-0/+1
| | | | | | | | This simple patch adds the firmware feature for VPHN to the firmware features bitmask. Signed-off-by: Jesse Larrew <jlarrew@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* powerpc: Fix hypervisor TLB batchingAnton Blanchard2009-10-141-2/+1
| | | | | | | | | | | | | | | | Profiling of a page fault scalability microbenchmark shows flush_hash_range is not calling the batch hpte invalidate hcall (H_BULK_REMOVE). It turns out we have a duplicate firmware feature for hcall-bulk and the current setup code stops after finding the first match. This meant we never batch and always do individual invalidates. The patch below removes the duplicate and shifts FW_FEATURE_CMO to close the gap. With the patch applied the single threaded page fault rate improves from 217169 to 238755 per second on a POWER5 test box, a 10% improvement. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* [POWERPC] pseries/firmware.c should include pseries/pseries.hMichael Ellerman2008-05-141-0/+1
| | | | | | | | | The declaration for fw_feature_init() is in pseries.h and implemented in firmware.c, so the latter should include the former. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Add CONFIG_PPC_PSERIES_DEBUG to enable debugging for platforms/pseriesMichael Ellerman2008-04-241-1/+0
| | | | | | | | | | | | | | | | | | | Add a DEBUG config setting which turns on all (most) of the debugging under platforms/pseries. To have this take effect we need to remove all the #undef DEBUG's, in various files. We leave the #undef DEBUG in platforms/pseries/lpar.c, as this enables debugging printks from the low-level hash table routines, and tends to make your system unusable. If you want those enabled you still have to turn them on by hand. Also some of the RAS code has a DEBUG block which causes a functional change, so I've keyed this off a different (non-existant) debug #define. This is only enabled if you have PPC_EARLY_DEBUG enabled also. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Convert from DBG() to pr_debug() in platforms/pseries/Michael Ellerman2008-04-241-7/+2
| | | | | | | | | | | | | | | In pseries/lpar.c, fix some printf specifier mismatches, and add a newline to one printk. In pseries/rtasd.c add "rtasd" to some messages to make it clear where they're coming from. In pseries/scanlog.c remove the hand-rolled runtime debugging support in there. This file has been largely unchanged for eons, if we need to debug it in future we can recompile. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Include udbg.h when using udbg_printfwill schmidt2007-11-081-0/+1
| | | | | | | | | | | | This fixes the error error: implicit declaration of function "udbg_printf" We have a few spots where we reference udbg_printf() without #including udbg.h. These are within #ifdef DEBUG blocks, so unnoticed until we do a #define DEBUG or #define DEBUG_LOW nearby. Signed-off-by: Will Schmidt <will_schmidt@vnet.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Fix future firmware feature fixups function failureMichael Neuling2007-07-221-16/+3
| | | | | | | | | | | | | | | | Move firmware feature initialisation from pSeries_init_early to the earlier pSeries_probe_hypertas so they are initialised before firmware feature fixups are applied. Currently firmware feature sections are only used for iSeries which initialises the these features much earlier. This is a bug in waiting on pSeries. Also adds some whitespace fixups. Signed-off-by: Michael Neuling <mikey@neuling.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Rename get_property to of_get_property: arch/powerpcStephen Rothwell2007-04-131-1/+1
| | | | | | Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Only use H_BULK_REMOVE if the firmware supports itPaul Mackerras2007-02-081-0/+1
| | | | | | | | The previous patch changing pSeries to use H_BULK_REMOVE broke the JS20 blade, where the firmware doesn't support H_BULK_REMOVE. This adds a firmware check so that on machines that don't have H_BULK_REMOVE, we just use the H_REMOVE call as before. Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] pseries: Constify & voidify get_property()Jeremy Kerr2006-07-311-1/+1
| | | | | | | | | | | | | Now that get_property() returns a void *, there's no need to cast its return value. Also, treat the return value as const, so we can constify get_property later. pseries platform changes. Built for pseries_defconfig Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [PATCH] powerpc: Rename and export ppc64_firmware_featuresMichael Ellerman2006-03-281-1/+1
| | | | | | | | We need to export ppc64_firmware_features for modules. Before we do that I think we should probably rename it to powerpc_firmware_features. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [PATCH] powerpc: Move pSeries firmware feature setup into platforms/pseriesMichael Ellerman2006-02-101-0/+103
Currently we have some stuff in firmware.h and kernel/firmware.c that is #ifdef CONFIG_PPC_PSERIES. Move it all into platforms/pseries. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
OpenPOWER on IntegriCloud