summaryrefslogtreecommitdiffstats
path: root/arch/mips/bcm47xx/board.c
Commit message (Collapse)AuthorAgeFilesLines
* MIPS: BCM47XX: Add support for Netgear R6200 V1Edward Matijević2019-07-251-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | The Netgear R6200 v1 uses a BCM4718A1 SOC and a BCM4352/BCM4360 for 5GHz wireless. This patch adds support for detecting this model board and registers the 3 buttons. I have tested that the device can boot kernels 4.14 and 4.19 under OpenWRT. There is one issue that the LEDs on the device are controlled by a 74HC164 that uses bit-banging instead of SPI so it isn't accessible to the kernel without adding a workaround. Without any workaround the device on boot will flash all LEDs once then the power LED will remain amber as all other LEDs stay off. Signed-off-by: Edward Matijevic <motolav@gmail.com> Acked-by: Hauke Mehrtens <hauke@hauke-m.de> [paul.burton@mips.com: - Sort bcm47xx_board_list_board_id alphabetically by board type. - Fix whitespace. - Wrap commit message & drop OpenWRT-based justification for bcm47xx_board_list_board_id being mis-sorted.] Signed-off-by: Paul Burton <paul.burton@mips.com>
* MIPS: BCM47XX: Add support for Netgear WNR1000 V3Rafał Miłecki2018-04-231-0/+2
| | | | | | | | | | | | | | | | | | | | | | | This adds support for detecting this model board and registers some LEDs and buttons. There are two uncommon things regarding this device: 1) It can use two different "board_id" ID values. Unit I have uses "U12H139T00_NETGEAR" value. This magic is also used in firmware file header. There are two reports (one from an OpenWrt user) of a different "U12H139T50_NETGEAR" magic though. 2) Power LEDs share GPIOs with buttons. Amber one seems to share GPIO 2 with WPS button and green one seems to share GPIO 3 with reset button. It remains unknown how to support them and handle buttons at the same time. For that reason they aren't added to the list of supported LEDs. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Hauke Mehrtens <hauke@hauke-m.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/19004/ Signed-off-by: James Hogan <jhogan@kernel.org>
* License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman2017-11-021-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* MIPS: BCM47XX: Add Luxul devices to the databaseDan Haab2017-01-251-0/+9
| | | | | | | | | | | | | So far only Luxul XWR-1750 router was supported. This adds a set of other Luxul devices based on BCM47XX. It's a standard support for LEDs and buttons. Signed-off-by: Dan Haab <dhaab@luxul.com> Cc: Hauke Mehrtens <hauke@hauke-m.de> Cc: Rafał Miłecki <zajec5@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/15106/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: BCM47XX: Support Luxul XWR-1750 boardDan Haab2015-06-211-0/+1
| | | | | | | | | | Signed-off-by: Dan Haab <dhaab@luxul.com> Acked-by: Rafał Miłecki <zajec5@gmail.com> Cc: linux-mips@linux-mips.org Cc: Hauke Mehrtens <hauke@hauke-m.de> Cc: Dan Haab <dhaab@luxul.com> Patchwork: https://patchwork.linux-mips.org/patch/9831/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* Merge branch '4.0-fixes' into mips-for-linux-nextRalf Baechle2015-04-131-2/+2
|\
| * MIPS: BCM47XX: Fix detecting Microsoft MN-700 & Asus WL500GRafał Miłecki2015-04-101-2/+2
| | | | | | | | | | | | | | | | | | | | | | Since the day of adding this code it was broken. We were iterating over a wrong array and checking for wrong NVRAM entry. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Cc: linux-mips@linux-mips.org Cc: Hauke Mehrtens <hauke@hauke-m.de> Patchwork: https://patchwork.linux-mips.org/patch/9654/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* | MIPS: BCM47xx: Devices database update for 4.1 (or 4.2?)Rafał Miłecki2015-04-021-0/+4
| | | | | | | | | | | | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Cc: linux-mips@linux-mips.org Cc: Hauke Mehrtens <hauke@hauke-m.de> Patchwork: https://patchwork.linux-mips.org/patch/9656/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* | MIPS: BCM47xx: Keep ID entries for non-standard devices togetherRafał Miłecki2015-04-021-28/+20
| | | | | | | | | | | | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Cc: linux-mips@linux-mips.org Cc: Hauke Mehrtens <hauke@hauke-m.de> Patchwork: https://patchwork.linux-mips.org/patch/9655/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* | MIPS: BCM47XX: Fix coding style to match kernel standardsRafał Miłecki2015-04-011-2/+1
| | | | | | | | | | | | | | | | | | | | | | [ralf@linux-mips.org: Fixed conflicts.] Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Acked-by: Hauke Mehrtens <hauke@hauke-m.de> Cc: linux-mips@linux-mips.org Cc: Paul Walmsley <paul@pwsan.com> Patchwork: https://patchwork.linux-mips.org/patch/8665/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* | MIPS: BCM47xx: Move NVRAM header to the include/linux/.Rafał Miłecki2015-04-011-1/+1
|/ | | | | | | | | | | | | | | | | | There are two reasons for having this header in the common place: 1) Simplifying drivers that read NVRAM entries. We will be able to safely call bcm47xx_nvram_* functions without #ifdef-s. 2) Getting NVRAM driver out of MIPS arch code. This is needed to support BCM5301X arch which also requires this NVRAM driver. Patch for that will follow once we get is reviewed. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Acked-by: Hauke Mehrtens <hauke@hauke-m.de> Cc: linux-mips@linux-mips.org Cc: Arnd Bergmann <arnd@arndb.de> Cc: Paul Walmsley <paul@pwsan.com> Cc: linux-soc@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8619/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: BCM47XX: Devices database update for 3.17Rafał Miłecki2014-07-301-1/+2
| | | | | | | | | | Detect more devices and register leds & buttons for them. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7394/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: BCM47xx: Distinguish WRT54G series devices by boardtypeRafał Miłecki2014-07-301-3/+3
| | | | | | | | | | | | Catalin reported that GPIOs used by bcm47xx don't match layout of his WRT54GS V1.0 board. It seems we need to distinguish these 54G* devices. Reported-by: Catalin Patulea <cat@vv.carleton.ca> Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Cc: linux-mips@linux-mips.org Cc: Hauke Mehrtens <hauke@hauke-m.de> Patchwork: https://patchwork.linux-mips.org/patch/7112/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: BCM47XX: add Microsoft MN-700 and Asus WL500GHauke Mehrtens2014-07-301-0/+17
| | | | | | | | | | | This patch adds detection for the Microsoft MN-700 and the Asus WL500G router. This is based on some old code from OpenWrt. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Cc: zajec5@gmail.com Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7490/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* Merge branch '3.14-fixes' into mips-for-linux-nextRalf Baechle2014-03-311-0/+1
|\
| * MIPS: bcm47xx: Include missing errno.h for ENXIOMarkos Chandras2014-03-061-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | Fixes the following build problen on allmodconfig: arch/mips/bcm47xx/board.c: In function 'bcm47xx_board_detect': arch/mips/bcm47xx/board.c:291:14: error: 'ENXIO' undeclared (first use in this function) Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6571/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* | MIPS: BCM47XX: Add Belkin F7Dxxxx board detectionCody P Schafer2014-03-261-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a few Belkin F7Dxxxx entries, with F7D4401 sourced from online documentation and the "F7D7302" being observed. F7D3301, F7D3302, and F7D4302 are reasonable guesses which are unlikely to cause mis-detection. Signed-off-by: Cody P Schafer <devel@codyps.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Cc: linux-mips@linux-mips.org Cc: zajec5@gmail.com Cc: Cody P Schafer <devel@codyps.com> Patchwork: https://patchwork.linux-mips.org/patch/6594/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* | MIPS: BCM47XX: Add detection and GPIO config for Siemens SE505v2Hauke Mehrtens2014-03-261-0/+17
| | | | | | | | | | | | | | | | | | | | | | | | This adds board detection for the Siemens SE505v2 and the led gpio configuration. This board does not have any buttons. This is based on OpenWrt broadcom-diag and Manuel Munz's nvram dump. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Cc: linux-mips@linux-mips.org Cc: zajec5@gmail.com Patchwork: https://patchwork.linux-mips.org/patch/6593/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* | MIPS: BCM47XX: Detect some more Linksys devicesHauke Mehrtens2014-03-261-1/+3
|/ | | | | | | | | | | | | | The Linksys WRT54G/GS/GL family uses the same boardtype numbers, and the same gpio configuration. The boardtype numbers are changing with the hardware versions, but these hardware numbers are different or each model. Detect them all as one device, this also worked in OpenWrt. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Cc: linux-mips@linux-mips.org Cc: zajec5@gmail.com Patchwork: https://patchwork.linux-mips.org/patch/6591/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: BCM47XX: fix sparse warnings in board.cHauke Mehrtens2014-01-241-10/+10
| | | | | | | | | | | | | | | | | | | This fixes the following sparse warnings: arch/mips/bcm47xx/board.c:39:16: warning: Using plain integer as NULL pointer arch/mips/bcm47xx/board.c:46:16: warning: Using plain integer as NULL pointer arch/mips/bcm47xx/board.c:53:16: warning: Using plain integer as NULL pointer arch/mips/bcm47xx/board.c:78:16: warning: Using plain integer as NULL pointer arch/mips/bcm47xx/board.c:99:16: warning: Using plain integer as NULL pointer arch/mips/bcm47xx/board.c:109:16: warning: Using plain integer as NULL pointer arch/mips/bcm47xx/board.c:124:16: warning: Using plain integer as NULL pointer arch/mips/bcm47xx/board.c:155:16: warning: Using plain integer as NULL pointer arch/mips/bcm47xx/board.c:177:16: warning: Using plain integer as NULL pointer arch/mips/bcm47xx/board.c:189:16: warning: Using plain integer as NULL pointer Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6318/
* MIPS: BCM47XX: add board detection for Linksys WRT54GS V1Hauke Mehrtens2014-01-241-0/+1
| | | | | | | | | This adds board detection for Linksys WRT54GS V1. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6317/
* MIPS: BCM47XX: fix detection for some boardsHauke Mehrtens2014-01-241-6/+7
| | | | | | | | | | | When a nvram reset was performed from CFE, it sometimes does not contain the productid value in nvram, but it still contains hardware_version. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6316/
* MIPS: BCM47XX: Add board detectionHauke Mehrtens2013-10-291-0/+309
Detect on which board this code is running based on some nvram settings. This is needed to start board specific workarounds and configure the leds and buttons which are on different gpios on every board. This patches add some boards we have seen, but there are many more. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5840 Patchwork: https://patchwork.linux-mips.org/patch/5855/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
OpenPOWER on IntegriCloud