diff options
Diffstat (limited to 'tools/testing/selftests/rcutorture')
15 files changed, 65 insertions, 102 deletions
diff --git a/tools/testing/selftests/rcutorture/bin/cpus2use.sh b/tools/testing/selftests/rcutorture/bin/cpus2use.sh index 4e9485590c10..1dbfb62567d2 100755 --- a/tools/testing/selftests/rcutorture/bin/cpus2use.sh +++ b/tools/testing/selftests/rcutorture/bin/cpus2use.sh @@ -15,8 +15,15 @@ then exit 0 fi ncpus=`grep '^processor' /proc/cpuinfo | wc -l` -idlecpus=`mpstat | tail -1 | \ - awk -v ncpus=$ncpus '{ print ncpus * ($7 + $NF) / 100 }'` +if mpstat -V > /dev/null 2>&1 +then + idlecpus=`mpstat | tail -1 | \ + awk -v ncpus=$ncpus '{ print ncpus * ($7 + $NF) / 100 }'` +else + # No mpstat command, so use all available CPUs. + echo The mpstat command is not available, so greedily using all CPUs. + idlecpus=$ncpus +fi awk -v ncpus=$ncpus -v idlecpus=$idlecpus < /dev/null ' BEGIN { cpus2use = idlecpus; diff --git a/tools/testing/selftests/rcutorture/bin/jitter.sh b/tools/testing/selftests/rcutorture/bin/jitter.sh index dc49a3ba6111..30cb5b27d32e 100755 --- a/tools/testing/selftests/rcutorture/bin/jitter.sh +++ b/tools/testing/selftests/rcutorture/bin/jitter.sh @@ -23,25 +23,39 @@ spinmax=${4-1000} n=1 -starttime=`awk 'BEGIN { print systime(); }' < /dev/null` +starttime=`gawk 'BEGIN { print systime(); }' < /dev/null` + +nohotplugcpus= +for i in /sys/devices/system/cpu/cpu[0-9]* +do + if test -f $i/online + then + : + else + curcpu=`echo $i | sed -e 's/^[^0-9]*//'` + nohotplugcpus="$nohotplugcpus $curcpu" + fi +done while : do # Check for done. - t=`awk -v s=$starttime 'BEGIN { print systime() - s; }' < /dev/null` + t=`gawk -v s=$starttime 'BEGIN { print systime() - s; }' < /dev/null` if test "$t" -gt "$duration" then exit 0; fi # Set affinity to randomly selected online CPU - cpus=`grep 1 /sys/devices/system/cpu/*/online | - sed -e 's,/[^/]*$,,' -e 's/^[^0-9]*//'` - - # Do not leave out poor old cpu0 which may not be hot-pluggable - if [ ! -f "/sys/devices/system/cpu/cpu0/online" ]; then - cpus="0 $cpus" + if cpus=`grep 1 /sys/devices/system/cpu/*/online 2>&1 | + sed -e 's,/[^/]*$,,' -e 's/^[^0-9]*//'` + then + : + else + cpus= fi + # Do not leave out non-hot-pluggable CPUs + cpus="$cpus $nohotplugcpus" cpumask=`awk -v cpus="$cpus" -v me=$me -v n=$n 'BEGIN { srand(n + me + systime()); diff --git a/tools/testing/selftests/rcutorture/bin/kvm-recheck-rcu.sh b/tools/testing/selftests/rcutorture/bin/kvm-recheck-rcu.sh index 2a7f3f4756a7..9d9a41625dd9 100755 --- a/tools/testing/selftests/rcutorture/bin/kvm-recheck-rcu.sh +++ b/tools/testing/selftests/rcutorture/bin/kvm-recheck-rcu.sh @@ -25,6 +25,7 @@ stopstate="`grep 'End-test grace-period state: g' $i/console.log 2> /dev/null | tail -1 | sed -e 's/^\[[ 0-9.]*] //' | awk '{ print \"[\" $1 \" \" $5 \" \" $6 \" \" $7 \"]\"; }' | tr -d '\012\015'`" +fwdprog="`grep 'rcu_torture_fwd_prog_cr Duration' $i/console.log 2> /dev/null | sed -e 's/^\[[^]]*] //' | sort -k15nr | head -1 | awk '{ print $14 " " $15 }'`" if test -z "$ngps" then echo "$configfile ------- " $stopstate @@ -39,7 +40,7 @@ else BEGIN { print ngps / dur }' < /dev/null` title="$title ($ngpsps/s)" fi - echo $title $stopstate + echo $title $stopstate $fwdprog nclosecalls=`grep --binary-files=text 'torture: Reader Batch' $i/console.log | tail -1 | awk '{for (i=NF-8;i<=NF;i++) sum+=$i; } END {print sum}'` if test -z "$nclosecalls" then diff --git a/tools/testing/selftests/rcutorture/bin/kvm-test-1-run.sh b/tools/testing/selftests/rcutorture/bin/kvm-test-1-run.sh index 27b7b5693ede..e0352304b98b 100755 --- a/tools/testing/selftests/rcutorture/bin/kvm-test-1-run.sh +++ b/tools/testing/selftests/rcutorture/bin/kvm-test-1-run.sh @@ -123,7 +123,7 @@ qemu_args=$5 boot_args=$6 cd $KVM -kstarttime=`awk 'BEGIN { print systime() }' < /dev/null` +kstarttime=`gawk 'BEGIN { print systime() }' < /dev/null` if test -z "$TORTURE_BUILDONLY" then echo ' ---' `date`: Starting kernel @@ -133,11 +133,10 @@ fi qemu_args="-enable-kvm -nographic $qemu_args" cpu_count=`configNR_CPUS.sh $resdir/ConfigFragment` cpu_count=`configfrag_boot_cpus "$boot_args" "$config_template" "$cpu_count"` -vcpus=`identify_qemu_vcpus` -if test $cpu_count -gt $vcpus +if test "$cpu_count" -gt "$TORTURE_ALLOTED_CPUS" then - echo CPU count limited from $cpu_count to $vcpus | tee -a $resdir/Warnings - cpu_count=$vcpus + echo CPU count limited from $cpu_count to $TORTURE_ALLOTED_CPUS | tee -a $resdir/Warnings + cpu_count=$TORTURE_ALLOTED_CPUS fi qemu_args="`specify_qemu_cpus "$QEMU" "$qemu_args" "$cpu_count"`" @@ -177,7 +176,7 @@ do then qemu_pid=`cat "$resdir/qemu_pid"` fi - kruntime=`awk 'BEGIN { print systime() - '"$kstarttime"' }' < /dev/null` + kruntime=`gawk 'BEGIN { print systime() - '"$kstarttime"' }' < /dev/null` if test -z "$qemu_pid" || kill -0 "$qemu_pid" > /dev/null 2>&1 then if test $kruntime -ge $seconds @@ -213,7 +212,7 @@ then oldline="`tail $resdir/console.log`" while : do - kruntime=`awk 'BEGIN { print systime() - '"$kstarttime"' }' < /dev/null` + kruntime=`gawk 'BEGIN { print systime() - '"$kstarttime"' }' < /dev/null` if kill -0 $qemu_pid > /dev/null 2>&1 then : @@ -227,7 +226,7 @@ then must_continue=yes fi last_ts="`tail $resdir/console.log | grep '^\[ *[0-9]\+\.[0-9]\+]' | tail -1 | sed -e 's/^\[ *//' -e 's/\..*$//'`" - if test -z "last_ts" + if test -z "$last_ts" then last_ts=0 fi diff --git a/tools/testing/selftests/rcutorture/bin/kvm.sh b/tools/testing/selftests/rcutorture/bin/kvm.sh index 72518580df23..78d18ab8e954 100755 --- a/tools/testing/selftests/rcutorture/bin/kvm.sh +++ b/tools/testing/selftests/rcutorture/bin/kvm.sh @@ -24,7 +24,9 @@ dur=$((30*60)) dryrun="" KVM="`pwd`/tools/testing/selftests/rcutorture"; export KVM PATH=${KVM}/bin:$PATH; export PATH -TORTURE_ALLOTED_CPUS="" +. functions.sh + +TORTURE_ALLOTED_CPUS="`identify_qemu_vcpus`" TORTURE_DEFCONFIG=defconfig TORTURE_BOOT_IMAGE="" TORTURE_INITRD="$KVM/initrd"; export TORTURE_INITRD @@ -40,8 +42,6 @@ cpus=0 ds=`date +%Y.%m.%d-%H:%M:%S` jitter="-1" -. functions.sh - usage () { echo "Usage: $scriptname optional arguments:" echo " --bootargs kernel-boot-arguments" @@ -93,6 +93,11 @@ do checkarg --cpus "(number)" "$#" "$2" '^[0-9]*$' '^--' cpus=$2 TORTURE_ALLOTED_CPUS="$2" + max_cpus="`identify_qemu_vcpus`" + if test "$TORTURE_ALLOTED_CPUS" -gt "$max_cpus" + then + TORTURE_ALLOTED_CPUS=$max_cpus + fi shift ;; --datestamp) @@ -198,9 +203,10 @@ fi CONFIGFRAG=${KVM}/configs/${TORTURE_SUITE}; export CONFIGFRAG +defaultconfigs="`tr '\012' ' ' < $CONFIGFRAG/CFLIST`" if test -z "$configs" then - configs="`cat $CONFIGFRAG/CFLIST`" + configs=$defaultconfigs fi if test -z "$resdir" @@ -209,7 +215,7 @@ then fi # Create a file of test-name/#cpus pairs, sorted by decreasing #cpus. -touch $T/cfgcpu +configs_derep= for CF in $configs do case $CF in @@ -222,15 +228,21 @@ do CF1=$CF ;; esac + for ((cur_rep=0;cur_rep<$config_reps;cur_rep++)) + do + configs_derep="$configs_derep $CF1" + done +done +touch $T/cfgcpu +configs_derep="`echo $configs_derep | sed -e "s/\<CFLIST\>/$defaultconfigs/g"`" +for CF1 in $configs_derep +do if test -f "$CONFIGFRAG/$CF1" then cpu_count=`configNR_CPUS.sh $CONFIGFRAG/$CF1` cpu_count=`configfrag_boot_cpus "$TORTURE_BOOTARGS" "$CONFIGFRAG/$CF1" "$cpu_count"` cpu_count=`configfrag_boot_maxcpus "$TORTURE_BOOTARGS" "$CONFIGFRAG/$CF1" "$cpu_count"` - for ((cur_rep=0;cur_rep<$config_reps;cur_rep++)) - do - echo $CF1 $cpu_count >> $T/cfgcpu - done + echo $CF1 $cpu_count >> $T/cfgcpu else echo "The --configs file $CF1 does not exist, terminating." exit 1 diff --git a/tools/testing/selftests/rcutorture/bin/mkinitrd.sh b/tools/testing/selftests/rcutorture/bin/mkinitrd.sh index 6fa9bd1ddc09..38e424d2392c 100755 --- a/tools/testing/selftests/rcutorture/bin/mkinitrd.sh +++ b/tools/testing/selftests/rcutorture/bin/mkinitrd.sh @@ -20,58 +20,9 @@ if [ -s "$D/initrd/init" ]; then exit 0 fi -T=${TMPDIR-/tmp}/mkinitrd.sh.$$ -trap 'rm -rf $T' 0 2 -mkdir $T - -cat > $T/init << '__EOF___' -#!/bin/sh -# Run in userspace a few milliseconds every second. This helps to -# exercise the NO_HZ_FULL portions of RCU. The 192 instances of "a" was -# empirically shown to give a nice multi-millisecond burst of user-mode -# execution on a 2GHz CPU, as desired. Modern CPUs will vary from a -# couple of milliseconds up to perhaps 100 milliseconds, which is an -# acceptable range. -# -# Why not calibrate an exact delay? Because within this initrd, we -# are restricted to Bourne-shell builtins, which as far as I know do not -# provide any means of obtaining a fine-grained timestamp. - -a4="a a a a" -a16="$a4 $a4 $a4 $a4" -a64="$a16 $a16 $a16 $a16" -a192="$a64 $a64 $a64" -while : -do - q= - for i in $a192 - do - q="$q $i" - done - sleep 1 -done -__EOF___ - -# Try using dracut to create initrd -if command -v dracut >/dev/null 2>&1 -then - echo Creating $D/initrd using dracut. - # Filesystem creation - dracut --force --no-hostonly --no-hostonly-cmdline --module "base" $T/initramfs.img - cd $D - mkdir -p initrd - cd initrd - zcat $T/initramfs.img | cpio -id - cp $T/init init - chmod +x init - echo Done creating $D/initrd using dracut - exit 0 -fi - -# No dracut, so create a C-language initrd/init program and statically -# link it. This results in a very small initrd, but might be a bit less -# future-proof than dracut. -echo "Could not find dracut, attempting C initrd" +# Create a C-language initrd/init infinite-loop program and statically +# link it. This results in a very small initrd. +echo "Creating a statically linked C-language initrd" cd $D mkdir -p initrd cd initrd diff --git a/tools/testing/selftests/rcutorture/configs/rcu/TASKS03 b/tools/testing/selftests/rcutorture/configs/rcu/TASKS03 index 28568b72a31b..ea4399020c6c 100644 --- a/tools/testing/selftests/rcutorture/configs/rcu/TASKS03 +++ b/tools/testing/selftests/rcutorture/configs/rcu/TASKS03 @@ -1,8 +1,5 @@ CONFIG_SMP=y CONFIG_NR_CPUS=2 -CONFIG_HOTPLUG_CPU=n -CONFIG_SUSPEND=n -CONFIG_HIBERNATION=n CONFIG_PREEMPT_NONE=n CONFIG_PREEMPT_VOLUNTARY=n CONFIG_PREEMPT=y diff --git a/tools/testing/selftests/rcutorture/configs/rcu/TREE02 b/tools/testing/selftests/rcutorture/configs/rcu/TREE02 index 35e639e39366..65daee4fbf5a 100644 --- a/tools/testing/selftests/rcutorture/configs/rcu/TREE02 +++ b/tools/testing/selftests/rcutorture/configs/rcu/TREE02 @@ -9,9 +9,6 @@ CONFIG_NO_HZ_IDLE=y CONFIG_NO_HZ_FULL=n CONFIG_RCU_FAST_NO_HZ=n CONFIG_RCU_TRACE=n -CONFIG_HOTPLUG_CPU=n -CONFIG_SUSPEND=n -CONFIG_HIBERNATION=n CONFIG_RCU_FANOUT=3 CONFIG_RCU_FANOUT_LEAF=3 CONFIG_RCU_NOCB_CPU=n diff --git a/tools/testing/selftests/rcutorture/configs/rcu/TREE03.boot b/tools/testing/selftests/rcutorture/configs/rcu/TREE03.boot index 5c3213cc3ad7..1c218944b1e9 100644 --- a/tools/testing/selftests/rcutorture/configs/rcu/TREE03.boot +++ b/tools/testing/selftests/rcutorture/configs/rcu/TREE03.boot @@ -3,3 +3,4 @@ rcutree.gp_preinit_delay=12 rcutree.gp_init_delay=3 rcutree.gp_cleanup_delay=3 rcutree.kthread_prio=2 +threadirqs diff --git a/tools/testing/selftests/rcutorture/configs/rcu/TREE04 b/tools/testing/selftests/rcutorture/configs/rcu/TREE04 index 24c9f6012e35..f6d6a40c0576 100644 --- a/tools/testing/selftests/rcutorture/configs/rcu/TREE04 +++ b/tools/testing/selftests/rcutorture/configs/rcu/TREE04 @@ -9,9 +9,6 @@ CONFIG_NO_HZ_IDLE=n CONFIG_NO_HZ_FULL=y CONFIG_RCU_FAST_NO_HZ=y CONFIG_RCU_TRACE=y -CONFIG_HOTPLUG_CPU=n -CONFIG_SUSPEND=n -CONFIG_HIBERNATION=n CONFIG_RCU_FANOUT=4 CONFIG_RCU_FANOUT_LEAF=3 CONFIG_DEBUG_LOCK_ALLOC=n diff --git a/tools/testing/selftests/rcutorture/configs/rcu/TREE06 b/tools/testing/selftests/rcutorture/configs/rcu/TREE06 index 05a4eec3f27b..bf4980d606b5 100644 --- a/tools/testing/selftests/rcutorture/configs/rcu/TREE06 +++ b/tools/testing/selftests/rcutorture/configs/rcu/TREE06 @@ -9,9 +9,6 @@ CONFIG_NO_HZ_IDLE=y CONFIG_NO_HZ_FULL=n CONFIG_RCU_FAST_NO_HZ=n CONFIG_RCU_TRACE=n -CONFIG_HOTPLUG_CPU=n -CONFIG_SUSPEND=n -CONFIG_HIBERNATION=n CONFIG_RCU_FANOUT=6 CONFIG_RCU_FANOUT_LEAF=6 CONFIG_RCU_NOCB_CPU=n diff --git a/tools/testing/selftests/rcutorture/configs/rcu/TREE08 b/tools/testing/selftests/rcutorture/configs/rcu/TREE08 index fb1c763c10c5..c810c5276a89 100644 --- a/tools/testing/selftests/rcutorture/configs/rcu/TREE08 +++ b/tools/testing/selftests/rcutorture/configs/rcu/TREE08 @@ -9,9 +9,6 @@ CONFIG_NO_HZ_IDLE=y CONFIG_NO_HZ_FULL=n CONFIG_RCU_FAST_NO_HZ=n CONFIG_RCU_TRACE=n -CONFIG_HOTPLUG_CPU=n -CONFIG_SUSPEND=n -CONFIG_HIBERNATION=n CONFIG_RCU_FANOUT=3 CONFIG_RCU_FANOUT_LEAF=2 CONFIG_RCU_NOCB_CPU=y diff --git a/tools/testing/selftests/rcutorture/configs/rcu/TREE09 b/tools/testing/selftests/rcutorture/configs/rcu/TREE09 index 6710e749d9de..8523a7515cbf 100644 --- a/tools/testing/selftests/rcutorture/configs/rcu/TREE09 +++ b/tools/testing/selftests/rcutorture/configs/rcu/TREE09 @@ -8,9 +8,6 @@ CONFIG_HZ_PERIODIC=n CONFIG_NO_HZ_IDLE=y CONFIG_NO_HZ_FULL=n CONFIG_RCU_TRACE=n -CONFIG_HOTPLUG_CPU=n -CONFIG_SUSPEND=n -CONFIG_HIBERNATION=n CONFIG_RCU_NOCB_CPU=n CONFIG_DEBUG_LOCK_ALLOC=n CONFIG_RCU_BOOST=n diff --git a/tools/testing/selftests/rcutorture/configs/rcu/TRIVIAL b/tools/testing/selftests/rcutorture/configs/rcu/TRIVIAL index 4d8eb5bfb6f6..5d546efa68e8 100644 --- a/tools/testing/selftests/rcutorture/configs/rcu/TRIVIAL +++ b/tools/testing/selftests/rcutorture/configs/rcu/TRIVIAL @@ -6,9 +6,6 @@ CONFIG_PREEMPT=n CONFIG_HZ_PERIODIC=n CONFIG_NO_HZ_IDLE=y CONFIG_NO_HZ_FULL=n -CONFIG_HOTPLUG_CPU=n -CONFIG_SUSPEND=n -CONFIG_HIBERNATION=n CONFIG_DEBUG_LOCK_ALLOC=n CONFIG_DEBUG_OBJECTS_RCU_HEAD=n CONFIG_RCU_EXPERT=y diff --git a/tools/testing/selftests/rcutorture/doc/TREE_RCU-kconfig.txt b/tools/testing/selftests/rcutorture/doc/TREE_RCU-kconfig.txt index af6fca03602f..1b96d68473b8 100644 --- a/tools/testing/selftests/rcutorture/doc/TREE_RCU-kconfig.txt +++ b/tools/testing/selftests/rcutorture/doc/TREE_RCU-kconfig.txt @@ -6,7 +6,6 @@ Kconfig Parameters: CONFIG_DEBUG_LOCK_ALLOC -- Do three, covering CONFIG_PROVE_LOCKING & not. CONFIG_DEBUG_OBJECTS_RCU_HEAD -- Do one. -CONFIG_HOTPLUG_CPU -- Do half. (Every second.) CONFIG_HZ_PERIODIC -- Do one. CONFIG_NO_HZ_IDLE -- Do those not otherwise specified. (Groups of two.) CONFIG_NO_HZ_FULL -- Do two, one with partial CPU enablement. |
