diff options
Diffstat (limited to 'include/uapi/linux/nl80211.h')
| -rw-r--r-- | include/uapi/linux/nl80211.h | 102 |
1 files changed, 101 insertions, 1 deletions
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index beb9a9d0c00a..5eab191607f8 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -52,6 +52,11 @@ #define NL80211_MULTICAST_GROUP_NAN "nan" #define NL80211_MULTICAST_GROUP_TESTMODE "testmode" +#define NL80211_EDMG_BW_CONFIG_MIN 4 +#define NL80211_EDMG_BW_CONFIG_MAX 15 +#define NL80211_EDMG_CHANNELS_MIN 1 +#define NL80211_EDMG_CHANNELS_MAX 0x3c /* 0b00111100 */ + /** * DOC: Station handling * @@ -244,6 +249,22 @@ */ /** + * DOC: VLAN offload support for setting group keys and binding STAs to VLANs + * + * By setting @NL80211_EXT_FEATURE_VLAN_OFFLOAD flag drivers can indicate they + * support offloading VLAN functionality in a manner where the driver exposes a + * single netdev that uses VLAN tagged frames and separate VLAN-specific netdevs + * can then be added using RTM_NEWLINK/IFLA_VLAN_ID similarly to the Ethernet + * case. Frames received from stations that are not assigned to any VLAN are + * delivered on the main netdev and frames to such stations can be sent through + * that main netdev. + * + * %NL80211_CMD_NEW_KEY (for group keys), %NL80211_CMD_NEW_STATION, and + * %NL80211_CMD_SET_STATION will optionally specify vlan_id using + * %NL80211_ATTR_VLAN_ID. + */ + +/** * enum nl80211_commands - supported nl80211 commands * * @NL80211_CMD_UNSPEC: unspecified command to catch errors @@ -566,6 +587,14 @@ * set of BSSID,frequency parameters is used (i.e., either the enforcing * %NL80211_ATTR_MAC,%NL80211_ATTR_WIPHY_FREQ or the less strict * %NL80211_ATTR_MAC_HINT and %NL80211_ATTR_WIPHY_FREQ_HINT). + * Driver shall not modify the IEs specified through %NL80211_ATTR_IE if + * %NL80211_ATTR_MAC is included. However, if %NL80211_ATTR_MAC_HINT is + * included, these IEs through %NL80211_ATTR_IE are specified by the user + * space based on the best possible BSS selected. Thus, if the driver ends + * up selecting a different BSS, it can modify these IEs accordingly (e.g. + * userspace asks the driver to perform PMKSA caching with BSS1 and the + * driver ends up selecting BSS2 with different PMKSA cache entry; RSNIE + * has to get updated with the apt PMKID). * %NL80211_ATTR_PREV_BSSID can be used to request a reassociation within * the ESS in case the device is already associated and an association with * a different BSS is desired. @@ -657,7 +686,9 @@ * is used during CSA period. * @NL80211_CMD_FRAME_WAIT_CANCEL: When an off-channel TX was requested, this * command may be used with the corresponding cookie to cancel the wait - * time if it is known that it is no longer necessary. + * time if it is known that it is no longer necessary. This command is + * also sent as an event whenever the driver has completed the off-channel + * wait time. * @NL80211_CMD_ACTION: Alias for @NL80211_CMD_FRAME for backward compatibility. * @NL80211_CMD_FRAME_TX_STATUS: Report TX status of a management frame * transmitted with %NL80211_CMD_FRAME. %NL80211_ATTR_COOKIE identifies @@ -2356,6 +2387,19 @@ enum nl80211_commands { * * @NL80211_ATTR_TWT_RESPONDER: Enable target wait time responder support. * + * @NL80211_ATTR_HE_OBSS_PD: nested attribute for OBSS Packet Detection + * functionality. + * + * @NL80211_ATTR_WIPHY_EDMG_CHANNELS: bitmap that indicates the 2.16 GHz + * channel(s) that are allowed to be used for EDMG transmissions. + * Defined by IEEE P802.11ay/D4.0 section 9.4.2.251. (u8 attribute) + * @NL80211_ATTR_WIPHY_EDMG_BW_CONFIG: Channel BW Configuration subfield encodes + * the allowed channel bandwidth configurations. (u8 attribute) + * Defined by IEEE P802.11ay/D4.0 section 9.4.2.251, Table 13. + * + * @NL80211_ATTR_VLAN_ID: VLAN ID (1..4094) for the station and VLAN group key + * (u16). + * * @NUM_NL80211_ATTR: total number of nl80211_attrs available * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use @@ -2813,6 +2857,13 @@ enum nl80211_attrs { NL80211_ATTR_TWT_RESPONDER, + NL80211_ATTR_HE_OBSS_PD, + + NL80211_ATTR_WIPHY_EDMG_CHANNELS, + NL80211_ATTR_WIPHY_EDMG_BW_CONFIG, + + NL80211_ATTR_VLAN_ID, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, @@ -3194,6 +3245,8 @@ enum nl80211_sta_bss_param { * sent to the station (u64, usec) * @NL80211_STA_INFO_AIRTIME_WEIGHT: current airtime weight for station (u16) * @NL80211_STA_INFO_AIRTIME_LINK_METRIC: airtime link metric for mesh station + * @NL80211_STA_INFO_ASSOC_AT_BOOTTIME: Timestamp (CLOCK_BOOTTIME, nanoseconds) + * of STA's association * @__NL80211_STA_INFO_AFTER_LAST: internal * @NL80211_STA_INFO_MAX: highest possible station info attribute */ @@ -3240,6 +3293,7 @@ enum nl80211_sta_info { NL80211_STA_INFO_TX_DURATION, NL80211_STA_INFO_AIRTIME_WEIGHT, NL80211_STA_INFO_AIRTIME_LINK_METRIC, + NL80211_STA_INFO_ASSOC_AT_BOOTTIME, /* keep last */ __NL80211_STA_INFO_AFTER_LAST, @@ -3421,6 +3475,12 @@ enum nl80211_band_iftype_attr { * @NL80211_BAND_ATTR_VHT_CAPA: VHT capabilities, as in the HT information IE * @NL80211_BAND_ATTR_IFTYPE_DATA: nested array attribute, with each entry using * attributes from &enum nl80211_band_iftype_attr + * @NL80211_BAND_ATTR_EDMG_CHANNELS: bitmap that indicates the 2.16 GHz + * channel(s) that are allowed to be used for EDMG transmissions. + * Defined by IEEE P802.11ay/D4.0 section 9.4.2.251. + * @NL80211_BAND_ATTR_EDMG_BW_CONFIG: Channel BW Configuration subfield encodes + * the allowed channel bandwidth configurations. + * Defined by IEEE P802.11ay/D4.0 section 9.4.2.251, Table 13. * @NL80211_BAND_ATTR_MAX: highest band attribute currently defined * @__NL80211_BAND_ATTR_AFTER_LAST: internal use */ @@ -3438,6 +3498,9 @@ enum nl80211_band_attr { NL80211_BAND_ATTR_VHT_CAPA, NL80211_BAND_ATTR_IFTYPE_DATA, + NL80211_BAND_ATTR_EDMG_CHANNELS, + NL80211_BAND_ATTR_EDMG_BW_CONFIG, + /* keep last */ __NL80211_BAND_ATTR_AFTER_LAST, NL80211_BAND_ATTR_MAX = __NL80211_BAND_ATTR_AFTER_LAST - 1 @@ -3836,6 +3899,8 @@ enum nl80211_user_reg_hint_type { * @NL80211_SURVEY_INFO_TIME_SCAN: time the radio spent for scan * (on this channel or globally) * @NL80211_SURVEY_INFO_PAD: attribute used for padding for 64-bit alignment + * @NL80211_SURVEY_INFO_TIME_BSS_RX: amount of time the radio spent + * receiving frames destined to the local BSS * @NL80211_SURVEY_INFO_MAX: highest survey info attribute number * currently defined * @__NL80211_SURVEY_INFO_AFTER_LAST: internal use @@ -3852,6 +3917,7 @@ enum nl80211_survey_info { NL80211_SURVEY_INFO_TIME_TX, NL80211_SURVEY_INFO_TIME_SCAN, NL80211_SURVEY_INFO_PAD, + NL80211_SURVEY_INFO_TIME_BSS_RX, /* keep last */ __NL80211_SURVEY_INFO_AFTER_LAST, @@ -4536,6 +4602,7 @@ enum nl80211_txrate_gi { * @NL80211_BAND_2GHZ: 2.4 GHz ISM band * @NL80211_BAND_5GHZ: around 5 GHz band (4.9 - 5.7 GHz) * @NL80211_BAND_60GHZ: around 60 GHz band (58.32 - 69.12 GHz) + * @NL80211_BAND_6GHZ: around 6 GHz band (5.9 - 7.2 GHz) * @NUM_NL80211_BANDS: number of bands, avoid using this in userspace * since newer kernel versions may support more bands */ @@ -4543,6 +4610,7 @@ enum nl80211_band { NL80211_BAND_2GHZ, NL80211_BAND_5GHZ, NL80211_BAND_60GHZ, + NL80211_BAND_6GHZ, NUM_NL80211_BANDS, }; @@ -5445,6 +5513,14 @@ enum nl80211_feature_flags { * @NL80211_EXT_FEATURE_SAE_OFFLOAD: Device wants to do SAE authentication in * station mode (SAE password is passed as part of the connect command). * + * @NL80211_EXT_FEATURE_VLAN_OFFLOAD: The driver supports a single netdev + * with VLAN tagged frames and separate VLAN-specific netdevs added using + * vconfig similarly to the Ethernet case. + * + * @NL80211_EXT_FEATURE_AQL: The driver supports the Airtime Queue Limit (AQL) + * feature, which prevents bufferbloat by using the expected transmission + * time to limit the amount of data buffered in the hardware. + * * @NUM_NL80211_EXT_FEATURES: number of extended features. * @MAX_NL80211_EXT_FEATURES: highest extended feature index. */ @@ -5490,6 +5566,8 @@ enum nl80211_ext_feature_index { NL80211_EXT_FEATURE_EXT_KEY_ID, NL80211_EXT_FEATURE_STA_TX_PWR, NL80211_EXT_FEATURE_SAE_OFFLOAD, + NL80211_EXT_FEATURE_VLAN_OFFLOAD, + NL80211_EXT_FEATURE_AQL, /* add new features before the definition below */ NUM_NL80211_EXT_FEATURES, @@ -6488,4 +6566,26 @@ enum nl80211_peer_measurement_ftm_resp { NL80211_PMSR_FTM_RESP_ATTR_MAX = NUM_NL80211_PMSR_FTM_RESP_ATTR - 1 }; +/** + * enum nl80211_obss_pd_attributes - OBSS packet detection attributes + * @__NL80211_HE_OBSS_PD_ATTR_INVALID: Invalid + * + * @NL80211_HE_OBSS_PD_ATTR_MIN_OFFSET: the OBSS PD minimum tx power offset. + * @NL80211_HE_OBSS_PD_ATTR_MAX_OFFSET: the OBSS PD maximum tx power offset. + * + * @__NL80211_HE_OBSS_PD_ATTR_LAST: Internal + * @NL80211_HE_OBSS_PD_ATTR_MAX: highest OBSS PD attribute. + */ +enum nl80211_obss_pd_attributes { + __NL80211_HE_OBSS_PD_ATTR_INVALID, + + NL80211_HE_OBSS_PD_ATTR_MIN_OFFSET, + NL80211_HE_OBSS_PD_ATTR_MAX_OFFSET, + + /* keep last */ + __NL80211_HE_OBSS_PD_ATTR_LAST, + NL80211_HE_OBSS_PD_ATTR_MAX = __NL80211_HE_OBSS_PD_ATTR_LAST - 1, +}; + + #endif /* __LINUX_NL80211_H */ |
