diff options
Diffstat (limited to 'include/net/mac80211.h')
| -rw-r--r-- | include/net/mac80211.h | 153 |
1 files changed, 128 insertions, 25 deletions
diff --git a/include/net/mac80211.h b/include/net/mac80211.h index d26da013f7c0..77e6b5a83b06 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -312,9 +312,10 @@ struct ieee80211_vif_chanctx_switch { * @BSS_CHANGED_KEEP_ALIVE: keep alive options (idle period or protected * keep alive) changed. * @BSS_CHANGED_MCAST_RATE: Multicast Rate setting changed for this interface - * @BSS_CHANGED_FTM_RESPONDER: fime timing reasurement request responder + * @BSS_CHANGED_FTM_RESPONDER: fine timing measurement request responder * functionality changed for this BSS (AP mode). * @BSS_CHANGED_TWT: TWT status changed + * @BSS_CHANGED_HE_OBSS_PD: OBSS Packet Detection status changed. * */ enum ieee80211_bss_change { @@ -346,6 +347,7 @@ enum ieee80211_bss_change { BSS_CHANGED_MCAST_RATE = 1<<25, BSS_CHANGED_FTM_RESPONDER = 1<<26, BSS_CHANGED_TWT = 1<<27, + BSS_CHANGED_HE_OBSS_PD = 1<<28, /* when adding here, make sure to change ieee80211_reconfig */ }; @@ -600,6 +602,8 @@ struct ieee80211_ftm_responder_params { * nontransmitted BSSIDs * @profile_periodicity: the least number of beacon frames need to be received * in order to discover all the nontransmitted BSSIDs in the set. + * @he_operation: HE operation information of the AP we are connected to + * @he_obss_pd: OBSS Packet Detection parameters. */ struct ieee80211_bss_conf { const u8 *bssid; @@ -661,6 +665,8 @@ struct ieee80211_bss_conf { u8 bssid_indicator; bool ema_ap; u8 profile_periodicity; + struct ieee80211_he_operation he_operation; + struct ieee80211_he_obss_pd he_obss_pd; }; /** @@ -961,6 +967,7 @@ ieee80211_rate_get_vht_nss(const struct ieee80211_tx_rate *rate) * @band: the band to transmit on (use for checking for races) * @hw_queue: HW queue to put the frame on, skb_get_queue_mapping() gives the AC * @ack_frame_id: internal frame ID for TX status, used internally + * @tx_time_est: TX time estimate in units of 4us, used internally * @control: union part for control data * @control.rates: TX rates array to try * @control.rts_cts_rate_idx: rate for RTS or CTS @@ -997,11 +1004,11 @@ ieee80211_rate_get_vht_nss(const struct ieee80211_tx_rate *rate) struct ieee80211_tx_info { /* common information */ u32 flags; - u8 band; - - u8 hw_queue; - - u16 ack_frame_id; + u32 band:3, + ack_frame_id:13, + hw_queue:4, + tx_time_est:10; + /* 2 free bits */ union { struct { @@ -1052,17 +1059,35 @@ struct ieee80211_tx_info { }; }; +static inline u16 +ieee80211_info_set_tx_time_est(struct ieee80211_tx_info *info, u16 tx_time_est) +{ + /* We only have 10 bits in tx_time_est, so store airtime + * in increments of 4us and clamp the maximum to 2**12-1 + */ + info->tx_time_est = min_t(u16, tx_time_est, 4095) >> 2; + return info->tx_time_est << 2; +} + +static inline u16 +ieee80211_info_get_tx_time_est(struct ieee80211_tx_info *info) +{ + return info->tx_time_est << 2; +} + /** - * struct ieee80211_tx_status - extended tx staus info for rate control + * struct ieee80211_tx_status - extended tx status info for rate control * * @sta: Station that the packet was transmitted for * @info: Basic tx status information * @skb: Packet skb (can be NULL if not provided by the driver) + * @rate: The TX rate that was used when sending the packet */ struct ieee80211_tx_status { struct ieee80211_sta *sta; struct ieee80211_tx_info *info; struct sk_buff *skb; + struct rate_info *rate; }; /** @@ -1694,7 +1719,7 @@ struct wireless_dev *ieee80211_vif_to_wdev(struct ieee80211_vif *vif); * %IEEE80211_KEY_FLAG_SW_MGMT_TX flag to encrypt such frames in SW. * @IEEE80211_KEY_FLAG_GENERATE_IV_MGMT: This flag should be set by the * driver for a CCMP/GCMP key to indicate that is requires IV generation - * only for managment frames (MFP). + * only for management frames (MFP). * @IEEE80211_KEY_FLAG_RESERVE_TAILROOM: This flag should be set by the * driver for a key to indicate that sufficient tailroom must always * be reserved for ICV or MIC, even when HW encryption is enabled. @@ -1702,6 +1727,9 @@ struct wireless_dev *ieee80211_vif_to_wdev(struct ieee80211_vif *vif); * a TKIP key if it only requires MIC space. Do not set together with * @IEEE80211_KEY_FLAG_GENERATE_MMIC on the same key. * @IEEE80211_KEY_FLAG_NO_AUTO_TX: Key needs explicit Tx activation. + * @IEEE80211_KEY_FLAG_GENERATE_MMIE: This flag should be set by the driver + * for a AES_CMAC key to indicate that it requires sequence number + * generation only */ enum ieee80211_key_flags { IEEE80211_KEY_FLAG_GENERATE_IV_MGMT = BIT(0), @@ -1714,6 +1742,7 @@ enum ieee80211_key_flags { IEEE80211_KEY_FLAG_RESERVE_TAILROOM = BIT(7), IEEE80211_KEY_FLAG_PUT_MIC_SPACE = BIT(8), IEEE80211_KEY_FLAG_NO_AUTO_TX = BIT(9), + IEEE80211_KEY_FLAG_GENERATE_MMIE = BIT(10), }; /** @@ -1986,7 +2015,7 @@ struct ieee80211_sta { * * * If the skb is transmitted as part of a BA agreement, the * A-MSDU maximal size is min(max_amsdu_len, 4065) bytes. - * * If the skb is not part of a BA aggreement, the A-MSDU maximal + * * If the skb is not part of a BA agreement, the A-MSDU maximal * size is min(max_amsdu_len, 7935) bytes. * * Both additional HT limits must be enforced by the low level @@ -2268,11 +2297,9 @@ struct ieee80211_txq { * @IEEE80211_HW_SUPPORTS_ONLY_HE_MULTI_BSSID: Hardware supports multi BSSID * only for HE APs. Applies if @IEEE80211_HW_SUPPORTS_MULTI_BSSID is set. * - * @IEEE80211_HW_EXT_KEY_ID_NATIVE: Driver and hardware are supporting Extended - * Key ID and can handle two unicast keys per station for Rx and Tx. - * - * @IEEE80211_HW_NO_AMPDU_KEYBORDER_SUPPORT: The card/driver can't handle - * active Tx A-MPDU sessions with Extended Key IDs during rekey. + * @IEEE80211_HW_AMPDU_KEYBORDER_SUPPORT: The card and driver is only + * aggregating MPDUs with the same keyid, allowing mac80211 to keep Tx + * A-MPDU sessions active while rekeying with Extended Key ID. * * @NUM_IEEE80211_HW_FLAGS: number of hardware flags, used for sizing arrays */ @@ -2325,8 +2352,7 @@ enum ieee80211_hw_flags { IEEE80211_HW_TX_STATUS_NO_AMPDU_LEN, IEEE80211_HW_SUPPORTS_MULTI_BSSID, IEEE80211_HW_SUPPORTS_ONLY_HE_MULTI_BSSID, - IEEE80211_HW_EXT_KEY_ID_NATIVE, - IEEE80211_HW_NO_AMPDU_KEYBORDER_SUPPORT, + IEEE80211_HW_AMPDU_KEYBORDER_SUPPORT, /* keep last, obviously */ NUM_IEEE80211_HW_FLAGS @@ -2454,6 +2480,8 @@ enum ieee80211_hw_flags { * * @weight_multiplier: Driver specific airtime weight multiplier used while * refilling deficit of each TXQ. + * + * @max_mtu: the max mtu could be set. */ struct ieee80211_hw { struct ieee80211_conf conf; @@ -2491,6 +2519,7 @@ struct ieee80211_hw { u8 max_nan_de_entries; u8 tx_sk_pacing_shift; u8 weight_multiplier; + u32 max_mtu; }; static inline bool _ieee80211_hw_check(struct ieee80211_hw *hw, @@ -2614,7 +2643,7 @@ ieee80211_get_alt_retry_rate(const struct ieee80211_hw *hw, * @hw: the hardware * @skb: the skb * - * Free a transmit skb. Use this funtion when some failure + * Free a transmit skb. Use this function when some failure * to transmit happened and thus status cannot be reported. */ void ieee80211_free_txskb(struct ieee80211_hw *hw, struct sk_buff *skb); @@ -3083,7 +3112,9 @@ enum ieee80211_filter_flags { * * @IEEE80211_AMPDU_RX_START: start RX aggregation * @IEEE80211_AMPDU_RX_STOP: stop RX aggregation - * @IEEE80211_AMPDU_TX_START: start TX aggregation + * @IEEE80211_AMPDU_TX_START: start TX aggregation, the driver must either + * call ieee80211_start_tx_ba_cb_irqsafe() or return the special + * status %IEEE80211_AMPDU_TX_START_IMMEDIATE. * @IEEE80211_AMPDU_TX_OPERATIONAL: TX aggregation has become operational * @IEEE80211_AMPDU_TX_STOP_CONT: stop TX aggregation but continue transmitting * queued packets, now unaggregated. After all packets are transmitted the @@ -3107,6 +3138,8 @@ enum ieee80211_ampdu_mlme_action { IEEE80211_AMPDU_TX_OPERATIONAL, }; +#define IEEE80211_AMPDU_TX_START_IMMEDIATE 1 + /** * struct ieee80211_ampdu_params - AMPDU action parameters * @@ -3171,13 +3204,13 @@ enum ieee80211_rate_control_changed { * * With the support for multi channel contexts and multi channel operations, * remain on channel operations might be limited/deferred/aborted by other - * flows/operations which have higher priority (and vise versa). + * flows/operations which have higher priority (and vice versa). * Specifying the ROC type can be used by devices to prioritize the ROC * operations compared to other operations/flows. * * @IEEE80211_ROC_TYPE_NORMAL: There are no special requirements for this ROC. * @IEEE80211_ROC_TYPE_MGMT_TX: The remain on channel request is required - * for sending managment frames offchannel. + * for sending management frames offchannel. */ enum ieee80211_roc_type { IEEE80211_ROC_TYPE_NORMAL = 0, @@ -3884,7 +3917,10 @@ struct ieee80211_ops { * * Even ``189`` would be wrong since 1 could be lost again. * - * Returns a negative error code on failure. + * Returns a negative error code on failure. The driver may return + * %IEEE80211_AMPDU_TX_START_IMMEDIATE for %IEEE80211_AMPDU_TX_START + * if the session can start immediately. + * * The callback can sleep. */ int (*ampdu_action)(struct ieee80211_hw *hw, @@ -3914,7 +3950,8 @@ struct ieee80211_ops { struct ieee80211_channel *chan, int duration, enum ieee80211_roc_type type); - int (*cancel_remain_on_channel)(struct ieee80211_hw *hw); + int (*cancel_remain_on_channel)(struct ieee80211_hw *hw, + struct ieee80211_vif *vif); int (*set_ringparam)(struct ieee80211_hw *hw, u32 tx, u32 rx); void (*get_ringparam)(struct ieee80211_hw *hw, u32 *tx, u32 *tx_max, u32 *rx, u32 *rx_max); @@ -5544,6 +5581,18 @@ void ieee80211_sta_register_airtime(struct ieee80211_sta *pubsta, u8 tid, u32 tx_airtime, u32 rx_airtime); /** + * ieee80211_txq_airtime_check - check if a txq can send frame to device + * + * @hw: pointer obtained from ieee80211_alloc_hw() + * @txq: pointer obtained from station or virtual interface + * + * Return true if the AQL's airtime limit has not been reached and the txq can + * continue to send more packets to the device. Otherwise return false. + */ +bool +ieee80211_txq_airtime_check(struct ieee80211_hw *hw, struct ieee80211_txq *txq); + +/** * ieee80211_iter_keys - iterate keys programmed into the device * @hw: pointer obtained from ieee80211_alloc_hw() * @vif: virtual interface to iterate, may be %NULL for all @@ -5596,7 +5645,7 @@ void ieee80211_iter_keys_rcu(struct ieee80211_hw *hw, /** * ieee80211_iter_chan_contexts_atomic - iterate channel contexts - * @hw: pointre obtained from ieee80211_alloc_hw(). + * @hw: pointer obtained from ieee80211_alloc_hw(). * @iter: iterator function * @iter_data: data passed to iterator function * @@ -5945,7 +5994,6 @@ struct rate_control_ops { void (*add_sta_debugfs)(void *priv, void *priv_sta, struct dentry *dir); - void (*remove_sta_debugfs)(void *priv, void *priv_sta); u32 (*get_expected_throughput)(void *priv_sta); }; @@ -6234,11 +6282,37 @@ void ieee80211_unreserve_tid(struct ieee80211_sta *sta, u8 tid); * but for the duration of the frame handling. * However, also note that while in the wake_tx_queue() method, * rcu_read_lock() is already held. + * + * softirqs must also be disabled when this function is called. + * In process context, use ieee80211_tx_dequeue_ni() instead. */ struct sk_buff *ieee80211_tx_dequeue(struct ieee80211_hw *hw, struct ieee80211_txq *txq); /** + * ieee80211_tx_dequeue_ni - dequeue a packet from a software tx queue + * (in process context) + * + * Like ieee80211_tx_dequeue() but can be called in process context + * (internally disables bottom halves). + * + * @hw: pointer as obtained from ieee80211_alloc_hw() + * @txq: pointer obtained from station or virtual interface, or from + * ieee80211_next_txq() + */ +static inline struct sk_buff *ieee80211_tx_dequeue_ni(struct ieee80211_hw *hw, + struct ieee80211_txq *txq) +{ + struct sk_buff *skb; + + local_bh_disable(); + skb = ieee80211_tx_dequeue(hw, txq); + local_bh_enable(); + + return skb; +} + +/** * ieee80211_next_txq - get next tx queue to pull packets from * * @hw: pointer as obtained from ieee80211_alloc_hw() @@ -6319,7 +6393,7 @@ ieee80211_return_txq(struct ieee80211_hw *hw, struct ieee80211_txq *txq, * again. * * The API ieee80211_txq_may_transmit() also ensures that TXQ list will be - * aligned aginst driver's own round-robin scheduler list. i.e it rotates + * aligned against driver's own round-robin scheduler list. i.e it rotates * the TXQ list till it makes the requested node becomes the first entry * in TXQ list. Thus both the TXQ list and driver's list are in sync. If this * function returns %true, the driver is expected to schedule packets @@ -6377,4 +6451,33 @@ void ieee80211_nan_func_match(struct ieee80211_vif *vif, struct cfg80211_nan_match_params *match, gfp_t gfp); +/** + * ieee80211_calc_rx_airtime - calculate estimated transmission airtime for RX. + * + * This function calculates the estimated airtime usage of a frame based on the + * rate information in the RX status struct and the frame length. + * + * @hw: pointer as obtained from ieee80211_alloc_hw() + * @status: &struct ieee80211_rx_status containing the transmission rate + * information. + * @len: frame length in bytes + */ +u32 ieee80211_calc_rx_airtime(struct ieee80211_hw *hw, + struct ieee80211_rx_status *status, + int len); + +/** + * ieee80211_calc_tx_airtime - calculate estimated transmission airtime for TX. + * + * This function calculates the estimated airtime usage of a frame based on the + * rate information in the TX info struct and the frame length. + * + * @hw: pointer as obtained from ieee80211_alloc_hw() + * @info: &struct ieee80211_tx_info of the frame. + * @len: frame length in bytes + */ +u32 ieee80211_calc_tx_airtime(struct ieee80211_hw *hw, + struct ieee80211_tx_info *info, + int len); + #endif /* MAC80211_H */ |
