diff options
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/net/ieee802154/cc2520.c | 55 |
1 files changed, 47 insertions, 8 deletions
diff --git a/drivers/net/ieee802154/cc2520.c b/drivers/net/ieee802154/cc2520.c index 233b6c6017d4..f833b8bb6663 100644 --- a/drivers/net/ieee802154/cc2520.c +++ b/drivers/net/ieee802154/cc2520.c @@ -738,6 +738,8 @@ static int cc2520_get_platform_data(struct spi_device *spi, pdata->vreg = of_get_named_gpio(np, "vreg-gpio", 0); pdata->reset = of_get_named_gpio(np, "reset-gpio", 0); + pdata->amplified = of_property_read_bool(np, "amplified"); + return 0; } @@ -746,6 +748,11 @@ static int cc2520_hw_init(struct cc2520_private *priv) u8 status = 0, state = 0xff; int ret; int timeout = 100; + struct cc2520_platform_data pdata; + + ret = cc2520_get_platform_data(priv->spi, &pdata); + if (ret) + goto err_ret; ret = cc2520_read_register(priv, CC2520_FSMSTAT1, &state); if (ret) @@ -768,11 +775,47 @@ static int cc2520_hw_init(struct cc2520_private *priv) dev_vdbg(&priv->spi->dev, "oscillator brought up\n"); - /* Registers default value: section 28.1 in Datasheet */ - ret = cc2520_write_register(priv, CC2520_TXPOWER, 0xF7); - if (ret) - goto err_ret; + /* If the CC2520 is connected to a CC2591 amplifier, we must both + * configure GPIOs on the CC2520 to correctly configure the CC2591 + * and change a couple settings of the CC2520 to work with the + * amplifier. See section 8 page 17 of TI application note AN065. + * http://www.ti.com/lit/an/swra229a/swra229a.pdf + */ + if (pdata.amplified) { + ret = cc2520_write_register(priv, CC2520_TXPOWER, 0xF9); + if (ret) + goto err_ret; + ret = cc2520_write_register(priv, CC2520_AGCCTRL1, 0x16); + if (ret) + goto err_ret; + + ret = cc2520_write_register(priv, CC2520_GPIOCTRL0, 0x46); + if (ret) + goto err_ret; + + ret = cc2520_write_register(priv, CC2520_GPIOCTRL5, 0x47); + if (ret) + goto err_ret; + + ret = cc2520_write_register(priv, CC2520_GPIOPOLARITY, 0x1e); + if (ret) + goto err_ret; + + ret = cc2520_write_register(priv, CC2520_TXCTRL, 0xc1); + if (ret) + goto err_ret; + } else { + ret = cc2520_write_register(priv, CC2520_TXPOWER, 0xF7); + if (ret) + goto err_ret; + + ret = cc2520_write_register(priv, CC2520_AGCCTRL1, 0x11); + if (ret) + goto err_ret; + } + + /* Registers default value: section 28.1 in Datasheet */ ret = cc2520_write_register(priv, CC2520_CCACTRL0, 0x1A); if (ret) goto err_ret; @@ -797,10 +840,6 @@ static int cc2520_hw_init(struct cc2520_private *priv) if (ret) goto err_ret; - ret = cc2520_write_register(priv, CC2520_AGCCTRL1, 0x11); - if (ret) - goto err_ret; - ret = cc2520_write_register(priv, CC2520_ADCTEST0, 0x10); if (ret) goto err_ret; |