diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/mfd/twl6030-irq.c | 73 | ||||
| -rw-r--r-- | drivers/mmc/host/omap_hsmmc.c | 4 |
2 files changed, 75 insertions, 2 deletions
diff --git a/drivers/mfd/twl6030-irq.c b/drivers/mfd/twl6030-irq.c index 10bf228ad626..2d3bb82dbf24 100644 --- a/drivers/mfd/twl6030-irq.c +++ b/drivers/mfd/twl6030-irq.c @@ -36,6 +36,7 @@ #include <linux/irq.h> #include <linux/kthread.h> #include <linux/i2c/twl.h> +#include <linux/platform_device.h> /* * TWL6030 (unlike its predecessors, which had two level interrupt handling) @@ -223,6 +224,78 @@ int twl6030_interrupt_mask(u8 bit_mask, u8 offset) } EXPORT_SYMBOL(twl6030_interrupt_mask); +int twl6030_mmc_card_detect_config(void) +{ + int ret; + u8 reg_val = 0; + + /* Unmasking the Card detect Interrupt line for MMC1 from Phoenix */ + twl6030_interrupt_unmask(TWL6030_MMCDETECT_INT_MASK, + REG_INT_MSK_LINE_B); + twl6030_interrupt_unmask(TWL6030_MMCDETECT_INT_MASK, + REG_INT_MSK_STS_B); + /* + * Intially Configuring MMC_CTRL for receving interrupts & + * Card status on TWL6030 for MMC1 + */ + ret = twl_i2c_read_u8(TWL6030_MODULE_ID0, ®_val, TWL6030_MMCCTRL); + if (ret < 0) { + pr_err("twl6030: Failed to read MMCCTRL, error %d\n", ret); + return ret; + } + reg_val &= ~VMMC_AUTO_OFF; + reg_val |= SW_FC; + ret = twl_i2c_write_u8(TWL6030_MODULE_ID0, reg_val, TWL6030_MMCCTRL); + if (ret < 0) { + pr_err("twl6030: Failed to write MMCCTRL, error %d\n", ret); + return ret; + } + + /* Configuring PullUp-PullDown register */ + ret = twl_i2c_read_u8(TWL6030_MODULE_ID0, ®_val, + TWL6030_CFG_INPUT_PUPD3); + if (ret < 0) { + pr_err("twl6030: Failed to read CFG_INPUT_PUPD3, error %d\n", + ret); + return ret; + } + reg_val &= ~(MMC_PU | MMC_PD); + ret = twl_i2c_write_u8(TWL6030_MODULE_ID0, reg_val, + TWL6030_CFG_INPUT_PUPD3); + if (ret < 0) { + pr_err("twl6030: Failed to write CFG_INPUT_PUPD3, error %d\n", + ret); + return ret; + } + return 0; +} +EXPORT_SYMBOL(twl6030_mmc_card_detect_config); + +int twl6030_mmc_card_detect(struct device *dev, int slot) +{ + int ret = -EIO; + u8 read_reg = 0; + struct platform_device *pdev = to_platform_device(dev); + + if (pdev->id) { + /* TWL6030 provide's Card detect support for + * only MMC1 controller. + */ + pr_err("Unkown MMC controller %d in %s\n", pdev->id, __func__); + return ret; + } + /* + * BIT0 of MMC_CTRL on TWL6030 provides card status for MMC1 + * 0 - Card not present ,1 - Card present + */ + ret = twl_i2c_read_u8(TWL6030_MODULE_ID0, &read_reg, + TWL6030_MMCCTRL); + if (ret >= 0) + ret = read_reg & STS_MMC; + return ret; +} +EXPORT_SYMBOL(twl6030_mmc_card_detect); + int twl6030_init_irq(int irq_num, unsigned irq_base, unsigned irq_end) { diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c index e865032a52eb..82a1079bbdc7 100644 --- a/drivers/mmc/host/omap_hsmmc.c +++ b/drivers/mmc/host/omap_hsmmc.c @@ -483,8 +483,6 @@ static int omap_hsmmc_gpio_init(struct omap_mmc_platform_data *pdata) int ret; if (gpio_is_valid(pdata->slots[0].switch_pin)) { - pdata->suspend = omap_hsmmc_suspend_cdirq; - pdata->resume = omap_hsmmc_resume_cdirq; if (pdata->slots[0].cover) pdata->slots[0].get_cover_state = omap_hsmmc_get_cover_state; @@ -2218,6 +2216,8 @@ static int __init omap_hsmmc_probe(struct platform_device *pdev) "Unable to grab MMC CD IRQ\n"); goto err_irq_cd; } + pdata->suspend = omap_hsmmc_suspend_cdirq; + pdata->resume = omap_hsmmc_resume_cdirq; } omap_hsmmc_disable_irq(host); |
