summaryrefslogtreecommitdiffstats
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/usb/gadget/at91_udc.c66
-rw-r--r--drivers/usb/gadget/at91_udc.h2
2 files changed, 55 insertions, 13 deletions
diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c
index fd6a7577ad25..93ead19507b6 100644
--- a/drivers/usb/gadget/at91_udc.c
+++ b/drivers/usb/gadget/at91_udc.c
@@ -76,6 +76,7 @@
static const char driver_name [] = "at91_udc";
static const char ep0name[] = "ep0";
+#define VBUS_POLL_TIMEOUT msecs_to_jiffies(1000)
#define at91_udp_read(udc, reg) \
__raw_readl((udc)->udp_baseaddr + (reg))
@@ -1585,20 +1586,48 @@ static struct at91_udc controller = {
/* ep6 and ep7 are also reserved (custom silicon might use them) */
};
+static void at91_vbus_update(struct at91_udc *udc, unsigned value)
+{
+ value ^= udc->board.vbus_active_low;
+ if (value != udc->vbus)
+ at91_vbus_session(&udc->gadget, value);
+}
+
static irqreturn_t at91_vbus_irq(int irq, void *_udc)
{
struct at91_udc *udc = _udc;
- unsigned value;
/* vbus needs at least brief debouncing */
udelay(10);
- value = gpio_get_value(udc->board.vbus_pin);
- if (value != udc->vbus)
- at91_vbus_session(&udc->gadget, value);
+ at91_vbus_update(udc, gpio_get_value(udc->board.vbus_pin));
return IRQ_HANDLED;
}
+static void at91_vbus_timer_work(struct work_struct *work)
+{
+ struct at91_udc *udc = container_of(work, struct at91_udc,
+ vbus_timer_work);
+
+ at91_vbus_update(udc, gpio_get_value_cansleep(udc->board.vbus_pin));
+
+ if (!timer_pending(&udc->vbus_timer))
+ mod_timer(&udc->vbus_timer, jiffies + VBUS_POLL_TIMEOUT);
+}
+
+static void at91_vbus_timer(unsigned long data)
+{
+ struct at91_udc *udc = (struct at91_udc *)data;
+
+ /*
+ * If we are polling vbus it is likely that the gpio is on an
+ * bus such as i2c or spi which may sleep, so schedule some work
+ * to read the vbus gpio
+ */
+ if (!work_pending(&udc->vbus_timer_work))
+ schedule_work(&udc->vbus_timer_work);
+}
+
int usb_gadget_register_driver (struct usb_gadget_driver *driver)
{
struct at91_udc *udc = &controller;
@@ -1800,13 +1829,23 @@ static int __init at91udc_probe(struct platform_device *pdev)
* Get the initial state of VBUS - we cannot expect
* a pending interrupt.
*/
- udc->vbus = gpio_get_value(udc->board.vbus_pin);
- if (request_irq(udc->board.vbus_pin, at91_vbus_irq,
- IRQF_DISABLED, driver_name, udc)) {
- DBG("request vbus irq %d failed\n",
- udc->board.vbus_pin);
- retval = -EBUSY;
- goto fail3;
+ udc->vbus = gpio_get_value_cansleep(udc->board.vbus_pin) ^
+ udc->board.vbus_active_low;
+
+ if (udc->board.vbus_polled) {
+ INIT_WORK(&udc->vbus_timer_work, at91_vbus_timer_work);
+ setup_timer(&udc->vbus_timer, at91_vbus_timer,
+ (unsigned long)udc);
+ mod_timer(&udc->vbus_timer,
+ jiffies + VBUS_POLL_TIMEOUT);
+ } else {
+ if (request_irq(udc->board.vbus_pin, at91_vbus_irq,
+ IRQF_DISABLED, driver_name, udc)) {
+ DBG("request vbus irq %d failed\n",
+ udc->board.vbus_pin);
+ retval = -EBUSY;
+ goto fail3;
+ }
}
} else {
DBG("no VBUS detection, assuming always-on\n");
@@ -1898,7 +1937,7 @@ static int at91udc_suspend(struct platform_device *pdev, pm_message_t mesg)
enable_irq_wake(udc->udp_irq);
udc->active_suspend = wake;
- if (udc->board.vbus_pin > 0 && wake)
+ if (udc->board.vbus_pin > 0 && !udc->board.vbus_polled && wake)
enable_irq_wake(udc->board.vbus_pin);
return 0;
}
@@ -1908,7 +1947,8 @@ static int at91udc_resume(struct platform_device *pdev)
struct at91_udc *udc = platform_get_drvdata(pdev);
unsigned long flags;
- if (udc->board.vbus_pin > 0 && udc->active_suspend)
+ if (udc->board.vbus_pin > 0 && !udc->board.vbus_polled &&
+ udc->active_suspend)
disable_irq_wake(udc->board.vbus_pin);
/* maybe reconnect to host; if so, clocks on */
diff --git a/drivers/usb/gadget/at91_udc.h b/drivers/usb/gadget/at91_udc.h
index bc76a39c2bb1..108ca54f9092 100644
--- a/drivers/usb/gadget/at91_udc.h
+++ b/drivers/usb/gadget/at91_udc.h
@@ -145,6 +145,8 @@ struct at91_udc {
void __iomem *udp_baseaddr;
int udp_irq;
spinlock_t lock;
+ struct timer_list vbus_timer;
+ struct work_struct vbus_timer_work;
};
static inline struct at91_udc *to_udc(struct usb_gadget *g)
OpenPOWER on IntegriCloud