summaryrefslogtreecommitdiffstats
path: root/drivers/usb/phy/phy-ab8500-usb.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/phy/phy-ab8500-usb.c')
-rw-r--r--drivers/usb/phy/phy-ab8500-usb.c44
1 files changed, 34 insertions, 10 deletions
diff --git a/drivers/usb/phy/phy-ab8500-usb.c b/drivers/usb/phy/phy-ab8500-usb.c
index aaf363f19714..20c0f082bf9c 100644
--- a/drivers/usb/phy/phy-ab8500-usb.c
+++ b/drivers/usb/phy/phy-ab8500-usb.c
@@ -108,7 +108,8 @@ enum ab8500_usb_mode {
USB_IDLE = 0,
USB_PERIPHERAL,
USB_HOST,
- USB_DEDICATED_CHG
+ USB_DEDICATED_CHG,
+ USB_UART
};
/* Register USB_LINK_STATUS interrupt */
@@ -330,6 +331,7 @@ static int ab8505_usb_link_status_update(struct ab8500_usb *ab,
switch (lsts) {
case USB_LINK_ACA_RID_B_8505:
event = UX500_MUSB_RIDB;
+ /* Fall through */
case USB_LINK_NOT_CONFIGURED_8505:
case USB_LINK_RESERVED0_8505:
case USB_LINK_RESERVED1_8505:
@@ -350,6 +352,7 @@ static int ab8505_usb_link_status_update(struct ab8500_usb *ab,
case USB_LINK_ACA_RID_C_NM_8505:
event = UX500_MUSB_RIDC;
+ /* Fall through */
case USB_LINK_STD_HOST_NC_8505:
case USB_LINK_STD_HOST_C_NS_8505:
case USB_LINK_STD_HOST_C_S_8505:
@@ -368,6 +371,7 @@ static int ab8505_usb_link_status_update(struct ab8500_usb *ab,
case USB_LINK_ACA_RID_A_8505:
case USB_LINK_ACA_DOCK_CHGR_8505:
event = UX500_MUSB_RIDA;
+ /* Fall through */
case USB_LINK_HM_IDGND_8505:
if (ab->mode == USB_IDLE) {
ab->mode = USB_HOST;
@@ -390,6 +394,24 @@ static int ab8505_usb_link_status_update(struct ab8500_usb *ab,
usb_phy_set_event(&ab->phy, USB_EVENT_CHARGER);
break;
+ /*
+ * FIXME: For now we rely on the boot firmware to set up the necessary
+ * PHY/pin configuration for UART mode.
+ *
+ * AB8505 does not seem to report any status change for UART cables,
+ * possibly because it cannot detect them autonomously.
+ * We may need to measure the ID resistance manually to reliably
+ * detect UART cables after bootup.
+ */
+ case USB_LINK_SAMSUNG_UART_CBL_PHY_EN_8505:
+ case USB_LINK_SAMSUNG_UART_CBL_PHY_DISB_8505:
+ if (ab->mode == USB_IDLE) {
+ ab->mode = USB_UART;
+ ab8500_usb_peri_phy_en(ab);
+ }
+
+ break;
+
default:
break;
}
@@ -422,6 +444,7 @@ static int ab8500_usb_link_status_update(struct ab8500_usb *ab,
switch (lsts) {
case USB_LINK_ACA_RID_B_8500:
event = UX500_MUSB_RIDB;
+ /* Fall through */
case USB_LINK_NOT_CONFIGURED_8500:
case USB_LINK_NOT_VALID_LINK_8500:
ab->mode = USB_IDLE;
@@ -438,6 +461,7 @@ static int ab8500_usb_link_status_update(struct ab8500_usb *ab,
case USB_LINK_ACA_RID_C_HS_8500:
case USB_LINK_ACA_RID_C_HS_CHIRP_8500:
event = UX500_MUSB_RIDC;
+ /* Fall through */
case USB_LINK_STD_HOST_NC_8500:
case USB_LINK_STD_HOST_C_NS_8500:
case USB_LINK_STD_HOST_C_S_8500:
@@ -457,6 +481,7 @@ static int ab8500_usb_link_status_update(struct ab8500_usb *ab,
case USB_LINK_ACA_RID_A_8500:
event = UX500_MUSB_RIDA;
+ /* Fall through */
case USB_LINK_HM_IDGND_8500:
if (ab->mode == USB_IDLE) {
ab->mode = USB_HOST;
@@ -560,6 +585,11 @@ static irqreturn_t ab8500_usb_disconnect_irq(int irq, void *data)
ab->vbus_draw = 0;
}
+ if (ab->mode == USB_UART) {
+ ab8500_usb_peri_phy_dis(ab);
+ ab->mode = USB_IDLE;
+ }
+
if (is_ab8500_2p0(ab->ab8500)) {
if (ab->mode == USB_DEDICATED_CHG) {
ab8500_usb_wd_linkstatus(ab,
@@ -712,10 +742,8 @@ static int ab8500_usb_irq_setup(struct platform_device *pdev,
if (ab->flags & AB8500_USB_FLAG_USE_LINK_STATUS_IRQ) {
irq = platform_get_irq_byname(pdev, "USB_LINK_STATUS");
- if (irq < 0) {
- dev_err(&pdev->dev, "Link status irq not found\n");
+ if (irq < 0)
return irq;
- }
err = devm_request_threaded_irq(&pdev->dev, irq, NULL,
ab8500_usb_link_status_irq,
IRQF_NO_SUSPEND | IRQF_SHARED | IRQF_ONESHOT,
@@ -728,10 +756,8 @@ static int ab8500_usb_irq_setup(struct platform_device *pdev,
if (ab->flags & AB8500_USB_FLAG_USE_ID_WAKEUP_IRQ) {
irq = platform_get_irq_byname(pdev, "ID_WAKEUP_F");
- if (irq < 0) {
- dev_err(&pdev->dev, "ID fall irq not found\n");
+ if (irq < 0)
return irq;
- }
err = devm_request_threaded_irq(&pdev->dev, irq, NULL,
ab8500_usb_disconnect_irq,
IRQF_NO_SUSPEND | IRQF_SHARED | IRQF_ONESHOT,
@@ -744,10 +770,8 @@ static int ab8500_usb_irq_setup(struct platform_device *pdev,
if (ab->flags & AB8500_USB_FLAG_USE_VBUS_DET_IRQ) {
irq = platform_get_irq_byname(pdev, "VBUS_DET_F");
- if (irq < 0) {
- dev_err(&pdev->dev, "VBUS fall irq not found\n");
+ if (irq < 0)
return irq;
- }
err = devm_request_threaded_irq(&pdev->dev, irq, NULL,
ab8500_usb_disconnect_irq,
IRQF_NO_SUSPEND | IRQF_SHARED | IRQF_ONESHOT,
OpenPOWER on IntegriCloud