summaryrefslogtreecommitdiffstats
path: root/drivers/usb/otg/twl4030-usb.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/otg/twl4030-usb.c')
-rw-r--r--drivers/usb/otg/twl4030-usb.c73
1 files changed, 28 insertions, 45 deletions
diff --git a/drivers/usb/otg/twl4030-usb.c b/drivers/usb/otg/twl4030-usb.c
index c4a86da858e2..523cad5bfea9 100644
--- a/drivers/usb/otg/twl4030-usb.c
+++ b/drivers/usb/otg/twl4030-usb.c
@@ -33,11 +33,11 @@
#include <linux/io.h>
#include <linux/delay.h>
#include <linux/usb/otg.h>
+#include <linux/usb/musb-omap.h>
#include <linux/usb/ulpi.h>
#include <linux/i2c/twl.h>
#include <linux/regulator/consumer.h>
#include <linux/err.h>
-#include <linux/notifier.h>
#include <linux/slab.h>
/* Register defines */
@@ -159,7 +159,7 @@ struct twl4030_usb {
enum twl4030_usb_mode usb_mode;
int irq;
- u8 linkstat;
+ enum omap_musb_vbus_id_status linkstat;
bool vbus_supplied;
u8 asleep;
bool irq_enabled;
@@ -246,11 +246,11 @@ twl4030_usb_clear_bits(struct twl4030_usb *twl, u8 reg, u8 bits)
/*-------------------------------------------------------------------------*/
-static enum usb_phy_events twl4030_usb_linkstat(struct twl4030_usb *twl)
+static enum omap_musb_vbus_id_status
+ twl4030_usb_linkstat(struct twl4030_usb *twl)
{
int status;
- int linkstat = USB_EVENT_NONE;
- struct usb_otg *otg = twl->phy.otg;
+ enum omap_musb_vbus_id_status linkstat = OMAP_MUSB_UNKNOWN;
twl->vbus_supplied = false;
@@ -273,30 +273,23 @@ static enum usb_phy_events twl4030_usb_linkstat(struct twl4030_usb *twl)
twl->vbus_supplied = true;
if (status & BIT(2))
- linkstat = USB_EVENT_ID;
+ linkstat = OMAP_MUSB_ID_GROUND;
else
- linkstat = USB_EVENT_VBUS;
- } else
- linkstat = USB_EVENT_NONE;
+ linkstat = OMAP_MUSB_VBUS_VALID;
+ } else {
+ if (twl->linkstat != OMAP_MUSB_UNKNOWN)
+ linkstat = OMAP_MUSB_VBUS_OFF;
+ }
dev_dbg(twl->dev, "HW_CONDITIONS 0x%02x/%d; link %d\n",
status, status, linkstat);
- twl->phy.last_event = linkstat;
-
/* REVISIT this assumes host and peripheral controllers
* are registered, and that both are active...
*/
spin_lock_irq(&twl->lock);
twl->linkstat = linkstat;
- if (linkstat == USB_EVENT_ID) {
- otg->default_a = true;
- twl->phy.state = OTG_STATE_A_IDLE;
- } else {
- otg->default_a = false;
- twl->phy.state = OTG_STATE_B_IDLE;
- }
spin_unlock_irq(&twl->lock);
return linkstat;
@@ -501,10 +494,10 @@ static DEVICE_ATTR(vbus, 0444, twl4030_usb_vbus_show, NULL);
static irqreturn_t twl4030_usb_irq(int irq, void *_twl)
{
struct twl4030_usb *twl = _twl;
- int status;
+ enum omap_musb_vbus_id_status status;
status = twl4030_usb_linkstat(twl);
- if (status >= 0) {
+ if (status > 0) {
/* FIXME add a set_power() method so that B-devices can
* configure the charger appropriately. It's not always
* correct to consume VBUS power, and how much current to
@@ -516,13 +509,13 @@ static irqreturn_t twl4030_usb_irq(int irq, void *_twl)
* USB_LINK_VBUS state. musb_hdrc won't care until it
* starts to handle softconnect right.
*/
- if (status == USB_EVENT_NONE)
+ if (status == OMAP_MUSB_VBUS_OFF ||
+ status == OMAP_MUSB_ID_FLOAT)
twl4030_phy_suspend(twl, 0);
else
twl4030_phy_resume(twl);
- atomic_notifier_call_chain(&twl->phy.notifier, status,
- twl->phy.otg->gadget);
+ omap_musb_mailbox(twl->linkstat);
}
sysfs_notify(&twl->dev->kobj, NULL, "vbus");
@@ -531,11 +524,12 @@ static irqreturn_t twl4030_usb_irq(int irq, void *_twl)
static void twl4030_usb_phy_init(struct twl4030_usb *twl)
{
- int status;
+ enum omap_musb_vbus_id_status status;
status = twl4030_usb_linkstat(twl);
- if (status >= 0) {
- if (status == USB_EVENT_NONE) {
+ if (status > 0) {
+ if (status == OMAP_MUSB_VBUS_OFF ||
+ status == OMAP_MUSB_ID_FLOAT) {
__twl4030_phy_power(twl, 0);
twl->asleep = 1;
} else {
@@ -543,8 +537,7 @@ static void twl4030_usb_phy_init(struct twl4030_usb *twl)
twl->asleep = 0;
}
- atomic_notifier_call_chain(&twl->phy.notifier, status,
- twl->phy.otg->gadget);
+ omap_musb_mailbox(twl->linkstat);
}
sysfs_notify(&twl->dev->kobj, NULL, "vbus");
}
@@ -598,21 +591,20 @@ static int __devinit twl4030_usb_probe(struct platform_device *pdev)
return -EINVAL;
}
- twl = kzalloc(sizeof *twl, GFP_KERNEL);
+ twl = devm_kzalloc(&pdev->dev, sizeof *twl, GFP_KERNEL);
if (!twl)
return -ENOMEM;
- otg = kzalloc(sizeof *otg, GFP_KERNEL);
- if (!otg) {
- kfree(twl);
+ otg = devm_kzalloc(&pdev->dev, sizeof *otg, GFP_KERNEL);
+ if (!otg)
return -ENOMEM;
- }
twl->dev = &pdev->dev;
twl->irq = platform_get_irq(pdev, 0);
twl->usb_mode = pdata->usb_mode;
twl->vbus_supplied = false;
twl->asleep = 1;
+ twl->linkstat = OMAP_MUSB_UNKNOWN;
twl->phy.dev = twl->dev;
twl->phy.label = "twl4030";
@@ -629,18 +621,14 @@ static int __devinit twl4030_usb_probe(struct platform_device *pdev)
err = twl4030_usb_ldo_init(twl);
if (err) {
dev_err(&pdev->dev, "ldo init failed\n");
- kfree(otg);
- kfree(twl);
return err;
}
- usb_set_transceiver(&twl->phy);
+ usb_add_phy(&twl->phy, USB_PHY_TYPE_USB2);
platform_set_drvdata(pdev, twl);
if (device_create_file(&pdev->dev, &dev_attr_vbus))
dev_warn(&pdev->dev, "could not create sysfs file\n");
- ATOMIC_INIT_NOTIFIER_HEAD(&twl->phy.notifier);
-
/* Our job is to use irqs and status from the power module
* to keep the transceiver disabled when nothing's connected.
*
@@ -651,13 +639,11 @@ static int __devinit twl4030_usb_probe(struct platform_device *pdev)
*/
twl->irq_enabled = true;
status = request_threaded_irq(twl->irq, NULL, twl4030_usb_irq,
- IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
- "twl4030_usb", twl);
+ IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING |
+ IRQF_ONESHOT, "twl4030_usb", twl);
if (status < 0) {
dev_dbg(&pdev->dev, "can't get IRQ %d, err %d\n",
twl->irq, status);
- kfree(otg);
- kfree(twl);
return status;
}
@@ -701,9 +687,6 @@ static int __exit twl4030_usb_remove(struct platform_device *pdev)
regulator_put(twl->usb1v8);
regulator_put(twl->usb3v1);
- kfree(twl->phy.otg);
- kfree(twl);
-
return 0;
}
OpenPOWER on IntegriCloud