1 files changed, 6 insertions, 38 deletions

diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c
index b66130c97269..f2a970f75bfa 100644
--- a/drivers/usb/gadget/atmel_usba_udc.c
+++ b/drivers/usb/gadget/atmel_usba_udc.c
@@ -489,13 +489,8 @@ request_complete(struct usba_ep *ep, struct usba_request *req, int status)
 	if (req->req.status == -EINPROGRESS)
 		req->req.status = status;
 
-	if (req->mapped) {
-		dma_unmap_single(
-			&udc->pdev->dev, req->req.dma, req->req.length,
-			ep->is_in ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
-		req->req.dma = DMA_ADDR_INVALID;
-		req->mapped = 0;
-	}
+	if (req->using_dma)
+		usb_gadget_unmap_request(&udc->gadget, &req->req, ep->is_in);
 
 	DBG(DBG_GADGET | DBG_REQ,
 		"%s: req %p complete: status %d, actual %u\n",
@@ -684,7 +679,6 @@ usba_ep_alloc_request(struct usb_ep *_ep, gfp_t gfp_flags)
 		return NULL;
 
 	INIT_LIST_HEAD(&req->queue);
-	req->req.dma = DMA_ADDR_INVALID;
 
 	return &req->req;
 }
@@ -717,20 +711,11 @@ static int queue_dma(struct usba_udc *udc, struct usba_ep *ep,
 		return -EINVAL;
 	}
 
-	req->using_dma = 1;
-
-	if (req->req.dma == DMA_ADDR_INVALID) {
-		req->req.dma = dma_map_single(
-			&udc->pdev->dev, req->req.buf, req->req.length,
-			ep->is_in ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
-		req->mapped = 1;
-	} else {
-		dma_sync_single_for_device(
-			&udc->pdev->dev, req->req.dma, req->req.length,
-			ep->is_in ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
-		req->mapped = 0;
-	}
+	ret = usb_gadget_map_request(&udc->gadget, &req->req, ep->is_in);
+	if (ret)
+		return ret;
 
+	req->using_dma = 1;
 	req->ctrl = USBA_BF(DMA_BUF_LEN, req->req.length)
 			| USBA_DMA_CH_EN | USBA_DMA_END_BUF_IE
 			| USBA_DMA_END_TR_EN | USBA_DMA_END_TR_IE;
@@ -1799,7 +1784,6 @@ static int atmel_usba_start(struct usb_gadget *gadget,
 
 	udc->devstatus = 1 << USB_DEVICE_SELF_POWERED;
 	udc->driver = driver;
-	udc->gadget.dev.driver = &driver->driver;
 	spin_unlock_irqrestore(&udc->lock, flags);
 
 	clk_enable(udc->pclk);
@@ -1841,7 +1825,6 @@ static int atmel_usba_stop(struct usb_gadget *gadget,
 	toggle_bias(0);
 	usba_writel(udc, CTRL, USBA_DISABLE_MASK);
 
-	udc->gadget.dev.driver = NULL;
 	udc->driver = NULL;
 
 	clk_disable(udc->hclk);
@@ -1900,10 +1883,6 @@ static int __init usba_udc_probe(struct platform_device *pdev)
 	dev_info(&pdev->dev, "FIFO at 0x%08lx mapped at %p\n",
 		 (unsigned long)fifo->start, udc->fifo);
 
-	device_initialize(&udc->gadget.dev);
-	udc->gadget.dev.parent = &pdev->dev;
-	udc->gadget.dev.dma_mask = pdev->dev.dma_mask;
-
 	platform_set_drvdata(pdev, udc);
 
 	/* Make sure we start from a clean slate */
@@ -1962,12 +1941,6 @@ static int __init usba_udc_probe(struct platform_device *pdev)
 	}
 	udc->irq = irq;
 
-	ret = device_add(&udc->gadget.dev);
-	if (ret) {
-		dev_dbg(&pdev->dev, "Could not add gadget: %d\n", ret);
-		goto err_device_add;
-	}
-
 	if (gpio_is_valid(pdata->vbus_pin)) {
 		if (!gpio_request(pdata->vbus_pin, "atmel_usba_udc")) {
 			udc->vbus_pin = pdata->vbus_pin;
@@ -2007,9 +1980,6 @@ err_add_udc:
 		gpio_free(udc->vbus_pin);
 	}
 
-	device_unregister(&udc->gadget.dev);
-
-err_device_add:
 	free_irq(irq, udc);
 err_request_irq:
 	kfree(usba_ep);
@@ -2053,8 +2023,6 @@ static int __exit usba_udc_remove(struct platform_device *pdev)
 	clk_put(udc->hclk);
 	clk_put(udc->pclk);
 
-	device_unregister(&udc->gadget.dev);
-
 	return 0;
 }