29 files changed, 338 insertions, 650 deletions

diff --git a/drivers/tty/serial/8250.c b/drivers/tty/serial/8250/8250.c
index 9f50c4e3c2be..9f50c4e3c2be 100644
--- a/drivers/tty/serial/8250.c
+++ b/drivers/tty/serial/8250/8250.c
diff --git a/drivers/tty/serial/8250.h b/drivers/tty/serial/8250/8250.h
index ae027be57e25..ae027be57e25 100644
--- a/drivers/tty/serial/8250.h
+++ b/drivers/tty/serial/8250/8250.h
diff --git a/drivers/tty/serial/8250_accent.c b/drivers/tty/serial/8250/8250_accent.c
index 34b51c651192..34b51c651192 100644
--- a/drivers/tty/serial/8250_accent.c
+++ b/drivers/tty/serial/8250/8250_accent.c
diff --git a/drivers/tty/serial/8250_acorn.c b/drivers/tty/serial/8250/8250_acorn.c
index b0ce8c56f1a4..b0ce8c56f1a4 100644
--- a/drivers/tty/serial/8250_acorn.c
+++ b/drivers/tty/serial/8250/8250_acorn.c
diff --git a/drivers/tty/serial/8250_boca.c b/drivers/tty/serial/8250/8250_boca.c
index d125dc107985..d125dc107985 100644
--- a/drivers/tty/serial/8250_boca.c
+++ b/drivers/tty/serial/8250/8250_boca.c
diff --git a/drivers/tty/serial/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c
index f574eef3075f..f574eef3075f 100644
--- a/drivers/tty/serial/8250_dw.c
+++ b/drivers/tty/serial/8250/8250_dw.c
diff --git a/drivers/tty/serial/8250_early.c b/drivers/tty/serial/8250/8250_early.c
index eaafb98debed..eaafb98debed 100644
--- a/drivers/tty/serial/8250_early.c
+++ b/drivers/tty/serial/8250/8250_early.c
diff --git a/drivers/tty/serial/8250_exar_st16c554.c b/drivers/tty/serial/8250/8250_exar_st16c554.c
index bf53aabf9b5e..bf53aabf9b5e 100644
--- a/drivers/tty/serial/8250_exar_st16c554.c
+++ b/drivers/tty/serial/8250/8250_exar_st16c554.c
diff --git a/drivers/tty/serial/8250_fourport.c b/drivers/tty/serial/8250/8250_fourport.c
index be1582609626..be1582609626 100644
--- a/drivers/tty/serial/8250_fourport.c
+++ b/drivers/tty/serial/8250/8250_fourport.c
diff --git a/drivers/tty/serial/8250_fsl.c b/drivers/tty/serial/8250/8250_fsl.c
index f4d3c47b88e8..f4d3c47b88e8 100644
--- a/drivers/tty/serial/8250_fsl.c
+++ b/drivers/tty/serial/8250/8250_fsl.c
diff --git a/drivers/tty/serial/8250_gsc.c b/drivers/tty/serial/8250/8250_gsc.c
index d8c0ffbfa6e3..d8c0ffbfa6e3 100644
--- a/drivers/tty/serial/8250_gsc.c
+++ b/drivers/tty/serial/8250/8250_gsc.c
diff --git a/drivers/tty/serial/8250_hp300.c b/drivers/tty/serial/8250/8250_hp300.c
index c13438c93012..c13438c93012 100644
--- a/drivers/tty/serial/8250_hp300.c
+++ b/drivers/tty/serial/8250/8250_hp300.c
diff --git a/drivers/tty/serial/8250_hub6.c b/drivers/tty/serial/8250/8250_hub6.c
index a5c778e83de0..a5c778e83de0 100644
--- a/drivers/tty/serial/8250_hub6.c
+++ b/drivers/tty/serial/8250/8250_hub6.c
diff --git a/drivers/tty/serial/8250_mca.c b/drivers/tty/serial/8250/8250_mca.c
index d20abf04541e..d20abf04541e 100644
--- a/drivers/tty/serial/8250_mca.c
+++ b/drivers/tty/serial/8250/8250_mca.c
diff --git a/drivers/tty/serial/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index da2b0b0a183f..da2b0b0a183f 100644
--- a/drivers/tty/serial/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
diff --git a/drivers/tty/serial/8250_pnp.c b/drivers/tty/serial/8250/8250_pnp.c
index a2f236510ff1..a2f236510ff1 100644
--- a/drivers/tty/serial/8250_pnp.c
+++ b/drivers/tty/serial/8250/8250_pnp.c
diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig
new file mode 100644
index 000000000000..591f8018e7dd
--- /dev/null
+++ b/drivers/tty/serial/8250/Kconfig
@@ -0,0 +1,280 @@
+#
+# The 8250/16550 serial drivers.  You shouldn't be in this list unless
+# you somehow have an implicit or explicit dependency on SERIAL_8250.
+#
+
+config SERIAL_8250
+	tristate "8250/16550 and compatible serial support"
+	select SERIAL_CORE
+	---help---
+	  This selects whether you want to include the driver for the standard
+	  serial ports.  The standard answer is Y.  People who might say N
+	  here are those that are setting up dedicated Ethernet WWW/FTP
+	  servers, or users that have one of the various bus mice instead of a
+	  serial mouse and don't intend to use their machine's standard serial
+	  port for anything.  (Note that the Cyclades and Stallion multi
+	  serial port drivers do not need this driver built in for them to
+	  work.)
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called 8250.
+	  [WARNING: Do not compile this driver as a module if you are using
+	  non-standard serial ports, since the configuration information will
+	  be lost when the driver is unloaded.  This limitation may be lifted
+	  in the future.]
+
+	  BTW1: If you have a mouseman serial mouse which is not recognized by
+	  the X window system, try running gpm first.
+
+	  BTW2: If you intend to use a software modem (also called Winmodem)
+	  under Linux, forget it.  These modems are crippled and require
+	  proprietary drivers which are only available under Windows.
+
+	  Most people will say Y or M here, so that they can use serial mice,
+	  modems and similar devices connecting to the standard serial ports.
+
+config SERIAL_8250_CONSOLE
+	bool "Console on 8250/16550 and compatible serial port"
+	depends on SERIAL_8250=y
+	select SERIAL_CORE_CONSOLE
+	---help---
+	  If you say Y here, it will be possible to use a serial port as the
+	  system console (the system console is the device which receives all
+	  kernel messages and warnings and which allows logins in single user
+	  mode). This could be useful if some terminal or printer is connected
+	  to that serial port.
+
+	  Even if you say Y here, the currently visible virtual console
+	  (/dev/tty0) will still be used as the system console by default, but
+	  you can alter that using a kernel command line option such as
+	  "console=ttyS1". (Try "man bootparam" or see the documentation of
+	  your boot loader (grub or lilo or loadlin) about how to pass options
+	  to the kernel at boot time.)
+
+	  If you don't have a VGA card installed and you say Y here, the
+	  kernel will automatically use the first serial line, /dev/ttyS0, as
+	  system console.
+
+	  You can set that using a kernel command line option such as
+	  "console=uart8250,io,0x3f8,9600n8"
+	  "console=uart8250,mmio,0xff5e0000,115200n8".
+	  and it will switch to normal serial console when the corresponding
+	  port is ready.
+	  "earlycon=uart8250,io,0x3f8,9600n8"
+	  "earlycon=uart8250,mmio,0xff5e0000,115200n8".
+	  it will not only setup early console.
+
+	  If unsure, say N.
+
+config FIX_EARLYCON_MEM
+	bool
+	depends on X86
+	default y
+
+config SERIAL_8250_GSC
+	tristate
+	depends on SERIAL_8250 && GSC
+	default SERIAL_8250
+
+config SERIAL_8250_PCI
+	tristate "8250/16550 PCI device support" if EXPERT
+	depends on SERIAL_8250 && PCI
+	default SERIAL_8250
+	help
+	  This builds standard PCI serial support. You may be able to
+	  disable this feature if you only need legacy serial support.
+	  Saves about 9K.
+
+config SERIAL_8250_PNP
+	tristate "8250/16550 PNP device support" if EXPERT
+	depends on SERIAL_8250 && PNP
+	default SERIAL_8250
+	help
+	  This builds standard PNP serial support. You may be able to
+	  disable this feature if you only need legacy serial support.
+
+config SERIAL_8250_HP300
+	tristate
+	depends on SERIAL_8250 && HP300
+	default SERIAL_8250
+
+config SERIAL_8250_CS
+	tristate "8250/16550 PCMCIA device support"
+	depends on PCMCIA && SERIAL_8250
+	---help---
+	  Say Y here to enable support for 16-bit PCMCIA serial devices,
+	  including serial port cards, modems, and the modem functions of
+	  multi-function Ethernet/modem cards. (PCMCIA- or PC-cards are
+	  credit-card size devices often used with laptops.)
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called serial_cs.
+
+	  If unsure, say N.
+
+config SERIAL_8250_NR_UARTS
+	int "Maximum number of 8250/16550 serial ports"
+	depends on SERIAL_8250
+	default "4"
+	help
+	  Set this to the number of serial ports you want the driver
+	  to support.  This includes any ports discovered via ACPI or
+	  PCI enumeration and any ports that may be added at run-time
+	  via hot-plug, or any ISA multi-port serial cards.
+
+config SERIAL_8250_RUNTIME_UARTS
+	int "Number of 8250/16550 serial ports to register at runtime"
+	depends on SERIAL_8250
+	range 0 SERIAL_8250_NR_UARTS
+	default "4"
+	help
+	  Set this to the maximum number of serial ports you want
+	  the kernel to register at boot time.  This can be overridden
+	  with the module parameter "nr_uarts", or boot-time parameter
+	  8250.nr_uarts
+
+config SERIAL_8250_EXTENDED
+	bool "Extended 8250/16550 serial driver options"
+	depends on SERIAL_8250
+	help
+	  If you wish to use any non-standard features of the standard "dumb"
+	  driver, say Y here. This includes HUB6 support, shared serial
+	  interrupts, special multiport support, support for more than the
+	  four COM 1/2/3/4 boards, etc.
+
+	  Note that the answer to this question won't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about serial driver options. If unsure, say N.
+
+config SERIAL_8250_MANY_PORTS
+	bool "Support more than 4 legacy serial ports"
+	depends on SERIAL_8250_EXTENDED && !IA64
+	help
+	  Say Y here if you have dumb serial boards other than the four
+	  standard COM 1/2/3/4 ports. This may happen if you have an AST
+	  FourPort, Accent Async, Boca (read the Boca mini-HOWTO, available
+	  from <http://www.tldp.org/docs.html#howto>), or other custom
+	  serial port hardware which acts similar to standard serial port
+	  hardware. If you only use the standard COM 1/2/3/4 ports, you can
+	  say N here to save some memory. You can also say Y if you have an
+	  "intelligent" multiport card such as Cyclades, Digiboards, etc.
+
+#
+# Multi-port serial cards
+#
+
+config SERIAL_8250_FOURPORT
+	tristate "Support Fourport cards"
+	depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS
+	help
+	  Say Y here if you have an AST FourPort serial board.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called 8250_fourport.
+
+config SERIAL_8250_ACCENT
+	tristate "Support Accent cards"
+	depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS
+	help
+	  Say Y here if you have an Accent Async serial board.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called 8250_accent.
+
+config SERIAL_8250_BOCA
+	tristate "Support Boca cards"
+	depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS
+	help
+	  Say Y here if you have a Boca serial board.  Please read the Boca
+	  mini-HOWTO, available from <http://www.tldp.org/docs.html#howto>
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called 8250_boca.
+
+config SERIAL_8250_EXAR_ST16C554
+	tristate "Support Exar ST16C554/554D Quad UART"
+	depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS
+	help
+	  The Uplogix Envoy TU301 uses this Exar Quad UART.  If you are
+	  tinkering with your Envoy TU301, or have a machine with this UART,
+	  say Y here.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called 8250_exar_st16c554.
+
+config SERIAL_8250_HUB6
+	tristate "Support Hub6 cards"
+	depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS
+	help
+	  Say Y here if you have a HUB6 serial board.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called 8250_hub6.
+
+#
+# Misc. options/drivers.
+#
+
+config SERIAL_8250_SHARE_IRQ
+	bool "Support for sharing serial interrupts"
+	depends on SERIAL_8250_EXTENDED
+	help
+	  Some serial boards have hardware support which allows multiple dumb
+	  serial ports on the same board to share a single IRQ. To enable
+	  support for this in the serial driver, say Y here.
+
+config SERIAL_8250_DETECT_IRQ
+	bool "Autodetect IRQ on standard ports (unsafe)"
+	depends on SERIAL_8250_EXTENDED
+	help
+	  Say Y here if you want the kernel to try to guess which IRQ
+	  to use for your serial port.
+
+	  This is considered unsafe; it is far better to configure the IRQ in
+	  a boot script using the setserial command.
+
+	  If unsure, say N.
+
+config SERIAL_8250_RSA
+	bool "Support RSA serial ports"
+	depends on SERIAL_8250_EXTENDED
+	help
+	  ::: To be written :::
+
+config SERIAL_8250_MCA
+	tristate "Support 8250-type ports on MCA buses"
+	depends on SERIAL_8250 != n && MCA
+	help
+	  Say Y here if you have a MCA serial ports.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called 8250_mca.
+
+config SERIAL_8250_ACORN
+	tristate "Acorn expansion card serial port support"
+	depends on ARCH_ACORN && SERIAL_8250
+	help
+	  If you have an Atomwide Serial card or Serial Port card for an Acorn
+	  system, say Y to this option.  The driver can handle 1, 2, or 3 port
+	  cards.  If unsure, say N.
+
+config SERIAL_8250_RM9K
+	bool "Support for MIPS RM9xxx integrated serial port"
+	depends on SERIAL_8250 != n && SERIAL_RM9000
+	select SERIAL_8250_SHARE_IRQ
+	help
+	  Selecting this option will add support for the integrated serial
+	  port hardware found on MIPS RM9122 and similar processors.
+	  If unsure, say N.
+
+config SERIAL_8250_FSL
+	bool
+	depends on SERIAL_8250_CONSOLE && PPC_UDBG_16550
+	default PPC
+
+config SERIAL_8250_DW
+	tristate "Support for Synopsys DesignWare 8250 quirks"
+	depends on SERIAL_8250 && OF
+	help
+	  Selecting this option will enable handling of the extra features
+	  present in the Synopsys DesignWare APB UART.
diff --git a/drivers/tty/serial/8250/Makefile b/drivers/tty/serial/8250/Makefile
new file mode 100644
index 000000000000..867bba738908
--- /dev/null
+++ b/drivers/tty/serial/8250/Makefile
@@ -0,0 +1,20 @@
+#
+# Makefile for the 8250 serial device drivers.
+#
+
+obj-$(CONFIG_SERIAL_8250)		+= 8250.o
+obj-$(CONFIG_SERIAL_8250_PNP)		+= 8250_pnp.o
+obj-$(CONFIG_SERIAL_8250_GSC)		+= 8250_gsc.o
+obj-$(CONFIG_SERIAL_8250_PCI)		+= 8250_pci.o
+obj-$(CONFIG_SERIAL_8250_HP300)		+= 8250_hp300.o
+obj-$(CONFIG_SERIAL_8250_CS)		+= serial_cs.o
+obj-$(CONFIG_SERIAL_8250_ACORN)		+= 8250_acorn.o
+obj-$(CONFIG_SERIAL_8250_CONSOLE)	+= 8250_early.o
+obj-$(CONFIG_SERIAL_8250_FOURPORT)	+= 8250_fourport.o
+obj-$(CONFIG_SERIAL_8250_ACCENT)	+= 8250_accent.o
+obj-$(CONFIG_SERIAL_8250_BOCA)		+= 8250_boca.o
+obj-$(CONFIG_SERIAL_8250_EXAR_ST16C554)	+= 8250_exar_st16c554.o
+obj-$(CONFIG_SERIAL_8250_HUB6)		+= 8250_hub6.o
+obj-$(CONFIG_SERIAL_8250_MCA)		+= 8250_mca.o
+obj-$(CONFIG_SERIAL_8250_FSL)		+= 8250_fsl.o
+obj-$(CONFIG_SERIAL_8250_DW)		+= 8250_dw.o
diff --git a/drivers/tty/serial/m32r_sio.c b/drivers/tty/serial/8250/m32r_sio.c
index 94a6792bf97b..94a6792bf97b 100644
--- a/drivers/tty/serial/m32r_sio.c
+++ b/drivers/tty/serial/8250/m32r_sio.c
diff --git a/drivers/tty/serial/m32r_sio.h b/drivers/tty/serial/8250/m32r_sio.h
index e9b7e11793b1..e9b7e11793b1 100644
--- a/drivers/tty/serial/m32r_sio.h
+++ b/drivers/tty/serial/8250/m32r_sio.h
diff --git a/drivers/tty/serial/m32r_sio_reg.h b/drivers/tty/serial/8250/m32r_sio_reg.h
index 4671473793e3..4671473793e3 100644
--- a/drivers/tty/serial/m32r_sio_reg.h
+++ b/drivers/tty/serial/8250/m32r_sio_reg.h
diff --git a/drivers/tty/serial/serial_cs.c b/drivers/tty/serial/8250/serial_cs.c
index 86090605a84e..86090605a84e 100644
--- a/drivers/tty/serial/serial_cs.c
+++ b/drivers/tty/serial/8250/serial_cs.c
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index aca2386c5ef1..2de99248dfae 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -5,279 +5,7 @@
 menu "Serial drivers"
 	depends on HAS_IOMEM
 
-#
-# The new 8250/16550 serial drivers
-config SERIAL_8250
-	tristate "8250/16550 and compatible serial support"
-	select SERIAL_CORE
-	---help---
-	  This selects whether you want to include the driver for the standard
-	  serial ports.  The standard answer is Y.  People who might say N
-	  here are those that are setting up dedicated Ethernet WWW/FTP
-	  servers, or users that have one of the various bus mice instead of a
-	  serial mouse and don't intend to use their machine's standard serial
-	  port for anything.  (Note that the Cyclades and Stallion multi
-	  serial port drivers do not need this driver built in for them to
-	  work.)
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called 8250.
-	  [WARNING: Do not compile this driver as a module if you are using
-	  non-standard serial ports, since the configuration information will
-	  be lost when the driver is unloaded.  This limitation may be lifted
-	  in the future.]
-
-	  BTW1: If you have a mouseman serial mouse which is not recognized by
-	  the X window system, try running gpm first.
-
-	  BTW2: If you intend to use a software modem (also called Winmodem)
-	  under Linux, forget it.  These modems are crippled and require
-	  proprietary drivers which are only available under Windows.
-
-	  Most people will say Y or M here, so that they can use serial mice,
-	  modems and similar devices connecting to the standard serial ports.
-
-config SERIAL_8250_CONSOLE
-	bool "Console on 8250/16550 and compatible serial port"
-	depends on SERIAL_8250=y
-	select SERIAL_CORE_CONSOLE
-	---help---
-	  If you say Y here, it will be possible to use a serial port as the
-	  system console (the system console is the device which receives all
-	  kernel messages and warnings and which allows logins in single user
-	  mode). This could be useful if some terminal or printer is connected
-	  to that serial port.
-
-	  Even if you say Y here, the currently visible virtual console
-	  (/dev/tty0) will still be used as the system console by default, but
-	  you can alter that using a kernel command line option such as
-	  "console=ttyS1". (Try "man bootparam" or see the documentation of
-	  your boot loader (grub or lilo or loadlin) about how to pass options
-	  to the kernel at boot time.)
-
-	  If you don't have a VGA card installed and you say Y here, the
-	  kernel will automatically use the first serial line, /dev/ttyS0, as
-	  system console.
-
-	  You can set that using a kernel command line option such as
-	  "console=uart8250,io,0x3f8,9600n8"
-	  "console=uart8250,mmio,0xff5e0000,115200n8".
-	  and it will switch to normal serial console when the corresponding 
-	  port is ready.
-	  "earlycon=uart8250,io,0x3f8,9600n8"
-	  "earlycon=uart8250,mmio,0xff5e0000,115200n8".
-	  it will not only setup early console.
-
-	  If unsure, say N.
-
-config FIX_EARLYCON_MEM
-	bool
-	depends on X86
-	default y
-
-config SERIAL_8250_GSC
-	tristate
-	depends on SERIAL_8250 && GSC
-	default SERIAL_8250
-
-config SERIAL_8250_PCI
-	tristate "8250/16550 PCI device support" if EXPERT
-	depends on SERIAL_8250 && PCI
-	default SERIAL_8250
-	help
-	  This builds standard PCI serial support. You may be able to
-	  disable this feature if you only need legacy serial support.
-	  Saves about 9K.
-
-config SERIAL_8250_PNP
-	tristate "8250/16550 PNP device support" if EXPERT
-	depends on SERIAL_8250 && PNP
-	default SERIAL_8250
-	help
-	  This builds standard PNP serial support. You may be able to
-	  disable this feature if you only need legacy serial support.
-
-config SERIAL_8250_FSL
-	bool
-	depends on SERIAL_8250_CONSOLE && PPC_UDBG_16550
-	default PPC
-
-config SERIAL_8250_HP300
-	tristate
-	depends on SERIAL_8250 && HP300
-	default SERIAL_8250
-
-config SERIAL_8250_CS
-	tristate "8250/16550 PCMCIA device support"
-	depends on PCMCIA && SERIAL_8250
-	---help---
-	  Say Y here to enable support for 16-bit PCMCIA serial devices,
-	  including serial port cards, modems, and the modem functions of
-	  multi-function Ethernet/modem cards. (PCMCIA- or PC-cards are
-	  credit-card size devices often used with laptops.)
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called serial_cs.
-
-	  If unsure, say N.
-
-config SERIAL_8250_NR_UARTS
-	int "Maximum number of 8250/16550 serial ports"
-	depends on SERIAL_8250
-	default "4"
-	help
-	  Set this to the number of serial ports you want the driver
-	  to support.  This includes any ports discovered via ACPI or
-	  PCI enumeration and any ports that may be added at run-time
-	  via hot-plug, or any ISA multi-port serial cards.
-
-config SERIAL_8250_RUNTIME_UARTS
-	int "Number of 8250/16550 serial ports to register at runtime"
-	depends on SERIAL_8250
-	range 0 SERIAL_8250_NR_UARTS
-	default "4"
-	help
-	  Set this to the maximum number of serial ports you want
-	  the kernel to register at boot time.  This can be overridden
-	  with the module parameter "nr_uarts", or boot-time parameter
-	  8250.nr_uarts
-
-config SERIAL_8250_EXTENDED
-	bool "Extended 8250/16550 serial driver options"
-	depends on SERIAL_8250
-	help
-	  If you wish to use any non-standard features of the standard "dumb"
-	  driver, say Y here. This includes HUB6 support, shared serial
-	  interrupts, special multiport support, support for more than the
-	  four COM 1/2/3/4 boards, etc.
-
-	  Note that the answer to this question won't directly affect the
-	  kernel: saying N will just cause the configurator to skip all
-	  the questions about serial driver options. If unsure, say N.
-
-config SERIAL_8250_MANY_PORTS
-	bool "Support more than 4 legacy serial ports"
-	depends on SERIAL_8250_EXTENDED && !IA64
-	help
-	  Say Y here if you have dumb serial boards other than the four
-	  standard COM 1/2/3/4 ports. This may happen if you have an AST
-	  FourPort, Accent Async, Boca (read the Boca mini-HOWTO, available
-	  from <http://www.tldp.org/docs.html#howto>), or other custom
-	  serial port hardware which acts similar to standard serial port
-	  hardware. If you only use the standard COM 1/2/3/4 ports, you can
-	  say N here to save some memory. You can also say Y if you have an
-	  "intelligent" multiport card such as Cyclades, Digiboards, etc.
-
-#
-# Multi-port serial cards
-#
-
-config SERIAL_8250_FOURPORT
-	tristate "Support Fourport cards"
-	depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS
-	help
-	  Say Y here if you have an AST FourPort serial board.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called 8250_fourport.
-
-config SERIAL_8250_ACCENT
-	tristate "Support Accent cards"
-	depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS
-	help
-	  Say Y here if you have an Accent Async serial board.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called 8250_accent.
-
-config SERIAL_8250_BOCA
-	tristate "Support Boca cards"
-	depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS
-	help
-	  Say Y here if you have a Boca serial board.  Please read the Boca
-	  mini-HOWTO, available from <http://www.tldp.org/docs.html#howto>
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called 8250_boca.
-
-config SERIAL_8250_EXAR_ST16C554
-	tristate "Support Exar ST16C554/554D Quad UART"
-	depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS
-	help
-	  The Uplogix Envoy TU301 uses this Exar Quad UART.  If you are
-	  tinkering with your Envoy TU301, or have a machine with this UART,
-	  say Y here.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called 8250_exar_st16c554.
-
-config SERIAL_8250_HUB6
-	tristate "Support Hub6 cards"
-	depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS
-	help
-	  Say Y here if you have a HUB6 serial board.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called 8250_hub6.
-
-config SERIAL_8250_SHARE_IRQ
-	bool "Support for sharing serial interrupts"
-	depends on SERIAL_8250_EXTENDED
-	help
-	  Some serial boards have hardware support which allows multiple dumb
-	  serial ports on the same board to share a single IRQ. To enable
-	  support for this in the serial driver, say Y here.
-
-config SERIAL_8250_DETECT_IRQ
-	bool "Autodetect IRQ on standard ports (unsafe)"
-	depends on SERIAL_8250_EXTENDED
-	help
-	  Say Y here if you want the kernel to try to guess which IRQ
-	  to use for your serial port.
-
-	  This is considered unsafe; it is far better to configure the IRQ in
-	  a boot script using the setserial command.
-
-	  If unsure, say N.
-
-config SERIAL_8250_RSA
-	bool "Support RSA serial ports"
-	depends on SERIAL_8250_EXTENDED
-	help
-	  ::: To be written :::
-
-config SERIAL_8250_MCA
-	tristate "Support 8250-type ports on MCA buses"
-	depends on SERIAL_8250 != n && MCA
-	help
-	  Say Y here if you have a MCA serial ports.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called 8250_mca.
-
-config SERIAL_8250_ACORN
-	tristate "Acorn expansion card serial port support"
-	depends on ARCH_ACORN && SERIAL_8250
-	help
-	  If you have an Atomwide Serial card or Serial Port card for an Acorn
-	  system, say Y to this option.  The driver can handle 1, 2, or 3 port
-	  cards.  If unsure, say N.
-
-config SERIAL_8250_RM9K
-	bool "Support for MIPS RM9xxx integrated serial port"
-	depends on SERIAL_8250 != n && SERIAL_RM9000
-	select SERIAL_8250_SHARE_IRQ
-	help
-	  Selecting this option will add support for the integrated serial
-	  port hardware found on MIPS RM9122 and similar processors.
-	  If unsure, say N.
-
-config SERIAL_8250_DW
-	tristate "Support for Synopsys DesignWare 8250 quirks"
-	depends on SERIAL_8250 && OF
-	help
-	  Selecting this option will enable handling of the extra features
-	  present in the Synopsys DesignWare APB UART.
+source "drivers/tty/serial/8250/Kconfig"
 
 comment "Non-8250 serial port support"
 
@@ -536,15 +264,6 @@ config SERIAL_MAX3107
 	help
 	  MAX3107 chip support
 
-config SERIAL_MAX3107_AAVA
-	tristate "MAX3107 AAVA platform support"
-	depends on X86_MRST && SERIAL_MAX3107 && GPIOLIB
-	select SERIAL_CORE
-	help
-	  Support for the MAX3107 chip configuration found on the AAVA
-	  platform. Includes the extra initialisation and GPIO support
-	  neded for this device.
-
 config SERIAL_DZ
 	bool "DECstation DZ serial driver"
 	depends on MACH_DECSTATION && 32BIT
diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile
index f5b01f2ce525..fef32e10c851 100644
--- a/drivers/tty/serial/Makefile
+++ b/drivers/tty/serial/Makefile
@@ -14,22 +14,9 @@ obj-$(CONFIG_SERIAL_SUNZILOG) += sunzilog.o
 obj-$(CONFIG_SERIAL_SUNSU) += sunsu.o
 obj-$(CONFIG_SERIAL_SUNSAB) += sunsab.o
 
-obj-$(CONFIG_SERIAL_8250) += 8250.o
-obj-$(CONFIG_SERIAL_8250_PNP) += 8250_pnp.o
-obj-$(CONFIG_SERIAL_8250_GSC) += 8250_gsc.o
-obj-$(CONFIG_SERIAL_8250_PCI) += 8250_pci.o
-obj-$(CONFIG_SERIAL_8250_HP300) += 8250_hp300.o
-obj-$(CONFIG_SERIAL_8250_CS) += serial_cs.o
-obj-$(CONFIG_SERIAL_8250_ACORN) += 8250_acorn.o
-obj-$(CONFIG_SERIAL_8250_CONSOLE) += 8250_early.o
-obj-$(CONFIG_SERIAL_8250_FOURPORT) += 8250_fourport.o
-obj-$(CONFIG_SERIAL_8250_ACCENT) += 8250_accent.o
-obj-$(CONFIG_SERIAL_8250_BOCA) += 8250_boca.o
-obj-$(CONFIG_SERIAL_8250_EXAR_ST16C554) += 8250_exar_st16c554.o
-obj-$(CONFIG_SERIAL_8250_HUB6) += 8250_hub6.o
-obj-$(CONFIG_SERIAL_8250_MCA) += 8250_mca.o
-obj-$(CONFIG_SERIAL_8250_FSL) += 8250_fsl.o
-obj-$(CONFIG_SERIAL_8250_DW) += 8250_dw.o
+# Now bring in any enabled 8250/16450/16550 type drivers.
+obj-$(CONFIG_SERIAL_8250) += 8250/
+
 obj-$(CONFIG_SERIAL_AMBA_PL010) += amba-pl010.o
 obj-$(CONFIG_SERIAL_AMBA_PL011) += amba-pl011.o
 obj-$(CONFIG_SERIAL_CLPS711X) += clps711x.o
@@ -42,7 +29,6 @@ obj-$(CONFIG_SERIAL_BFIN_SPORT) += bfin_sport_uart.o
 obj-$(CONFIG_SERIAL_SAMSUNG) += samsung.o
 obj-$(CONFIG_SERIAL_MAX3100) += max3100.o
 obj-$(CONFIG_SERIAL_MAX3107) += max3107.o
-obj-$(CONFIG_SERIAL_MAX3107_AAVA) += max3107-aava.o
 obj-$(CONFIG_SERIAL_IP22_ZILOG) += ip22zilog.o
 obj-$(CONFIG_SERIAL_MUX) += mux.o
 obj-$(CONFIG_SERIAL_68328) += 68328serial.o
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index 9ae024025ff3..6800f5f26241 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -159,6 +159,7 @@ struct uart_amba_port {
 	unsigned int		fifosize;	/* vendor-specific */
 	unsigned int		lcrh_tx;	/* vendor-specific */
 	unsigned int		lcrh_rx;	/* vendor-specific */
+	unsigned int		old_cr;		/* state during shutdown */
 	bool			autorts;
 	char			type[12];
 	bool			interrupt_may_hang; /* vendor-specific */
@@ -1411,7 +1412,9 @@ static int pl011_startup(struct uart_port *port)
 	while (readw(uap->port.membase + UART01x_FR) & UART01x_FR_BUSY)
 		barrier();
 
-	cr = UART01x_CR_UARTEN | UART011_CR_RXE | UART011_CR_TXE;
+	/* restore RTS and DTR */
+	cr = uap->old_cr & (UART011_CR_RTS | UART011_CR_DTR);
+	cr |= UART01x_CR_UARTEN | UART011_CR_RXE | UART011_CR_TXE;
 	writew(cr, uap->port.membase + UART011_CR);
 
 	/* Clear pending error interrupts */
@@ -1469,6 +1472,7 @@ static void pl011_shutdown_channel(struct uart_amba_port *uap,
 static void pl011_shutdown(struct uart_port *port)
 {
 	struct uart_amba_port *uap = (struct uart_amba_port *)port;
+	unsigned int cr;
 
 	/*
 	 * disable all interrupts
@@ -1488,9 +1492,16 @@ static void pl011_shutdown(struct uart_port *port)
 
 	/*
 	 * disable the port
+	 * disable the port. It should not disable RTS and DTR.
+	 * Also RTS and DTR state should be preserved to restore
+	 * it during startup().
 	 */
 	uap->autorts = false;
-	writew(UART01x_CR_UARTEN | UART011_CR_TXE, uap->port.membase + UART011_CR);
+	cr = readw(uap->port.membase + UART011_CR);
+	uap->old_cr = cr;
+	cr &= UART011_CR_RTS | UART011_CR_DTR;
+	cr |= UART01x_CR_UARTEN | UART011_CR_TXE;
+	writew(cr, uap->port.membase + UART011_CR);
 
 	/*
 	 * disable break condition and fifos
@@ -1740,9 +1751,19 @@ pl011_console_write(struct console *co, const char *s, unsigned int count)
 {
 	struct uart_amba_port *uap = amba_ports[co->index];
 	unsigned int status, old_cr, new_cr;
+	unsigned long flags;
+	int locked = 1;
 
 	clk_enable(uap->clk);
 
+	local_irq_save(flags);
+	if (uap->port.sysrq)
+		locked = 0;
+	else if (oops_in_progress)
+		locked = spin_trylock(&uap->port.lock);
+	else
+		spin_lock(&uap->port.lock);
+
 	/*
 	 *	First save the CR then disable the interrupts
 	 */
@@ -1762,6 +1783,10 @@ pl011_console_write(struct console *co, const char *s, unsigned int count)
 	} while (status & UART01x_FR_BUSY);
 	writew(old_cr, uap->port.membase + UART011_CR);
 
+	if (locked)
+		spin_unlock(&uap->port.lock);
+	local_irq_restore(flags);
+
 	clk_disable(uap->clk);
 }
 
@@ -1905,6 +1930,7 @@ static int pl011_probe(struct amba_device *dev, const struct amba_id *id)
 	uap->vendor = vendor;
 	uap->lcrh_rx = vendor->lcrh_rx;
 	uap->lcrh_tx = vendor->lcrh_tx;
+	uap->old_cr = 0;
 	uap->fifosize = vendor->fifosize;
 	uap->interrupt_may_hang = vendor->interrupt_may_hang;
 	uap->port.dev = &dev->dev;
diff --git a/drivers/tty/serial/jsm/jsm_driver.c b/drivers/tty/serial/jsm/jsm_driver.c
index 7c867a046c97..7545fe1b9925 100644
--- a/drivers/tty/serial/jsm/jsm_driver.c
+++ b/drivers/tty/serial/jsm/jsm_driver.c
@@ -251,6 +251,7 @@ static void jsm_io_resume(struct pci_dev *pdev)
 	struct jsm_board *brd = pci_get_drvdata(pdev);
 
 	pci_restore_state(pdev);
+	pci_save_state(pdev);
 
 	jsm_uart_port_init(brd);
 }
diff --git a/drivers/tty/serial/max3107-aava.c b/drivers/tty/serial/max3107-aava.c
deleted file mode 100644
index aae772a71de6..000000000000
--- a/drivers/tty/serial/max3107-aava.c
+++ /dev/null
@@ -1,344 +0,0 @@
-/*
- *  max3107.c - spi uart protocol driver for Maxim 3107
- *  Based on max3100.c
- *	by Christian Pellegrin <chripell@evolware.org>
- *  and	max3110.c
- *	by Feng Tang <feng.tang@intel.com>
- *
- *  Copyright (C) Aavamobile 2009
- *
- * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- *
- */
-
-#include <linux/delay.h>
-#include <linux/device.h>
-#include <linux/serial_core.h>
-#include <linux/serial.h>
-#include <linux/spi/spi.h>
-#include <linux/freezer.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/sfi.h>
-#include <linux/module.h>
-#include <asm/mrst.h>
-#include "max3107.h"
-
-/* GPIO direction to input function */
-static int max3107_gpio_direction_in(struct gpio_chip *chip, unsigned offset)
-{
-	struct max3107_port *s = container_of(chip, struct max3107_port, chip);
-	u16 buf[1];		/* Buffer for SPI transfer */
-
-	if (offset >= MAX3107_GPIO_COUNT) {
-		dev_err(&s->spi->dev, "Invalid GPIO\n");
-		return -EINVAL;
-	}
-
-	/* Read current GPIO configuration register */
-	buf[0] = MAX3107_GPIOCFG_REG;
-	/* Perform SPI transfer */
-	if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 2)) {
-		dev_err(&s->spi->dev, "SPI transfer GPIO read failed\n");
-		return -EIO;
-	}
-	buf[0] &= MAX3107_SPI_RX_DATA_MASK;
-
-	/* Set GPIO to input */
-	buf[0] &= ~(0x0001 << offset);
-
-	/* Write new GPIO configuration register value */
-	buf[0] |= (MAX3107_WRITE_BIT | MAX3107_GPIOCFG_REG);
-	/* Perform SPI transfer */
-	if (max3107_rw(s, (u8 *)buf, NULL, 2)) {
-		dev_err(&s->spi->dev, "SPI transfer GPIO write failed\n");
-		return -EIO;
-	}
-	return 0;
-}
-
-/* GPIO direction to output function */
-static int max3107_gpio_direction_out(struct gpio_chip *chip, unsigned offset,
-					int value)
-{
-	struct max3107_port *s = container_of(chip, struct max3107_port, chip);
-	u16 buf[2];	/* Buffer for SPI transfers */
-
-	if (offset >= MAX3107_GPIO_COUNT) {
-		dev_err(&s->spi->dev, "Invalid GPIO\n");
-		return -EINVAL;
-	}
-
-	/* Read current GPIO configuration and data registers */
-	buf[0] = MAX3107_GPIOCFG_REG;
-	buf[1] = MAX3107_GPIODATA_REG;
-	/* Perform SPI transfer */
-	if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 4)) {
-		dev_err(&s->spi->dev, "SPI transfer gpio failed\n");
-		return -EIO;
-	}
-	buf[0] &= MAX3107_SPI_RX_DATA_MASK;
-	buf[1] &= MAX3107_SPI_RX_DATA_MASK;
-
-	/* Set GPIO to output */
-	buf[0] |= (0x0001 << offset);
-	/* Set value */
-	if (value)
-		buf[1] |= (0x0001 << offset);
-	else
-		buf[1] &= ~(0x0001 << offset);
-
-	/* Write new GPIO configuration and data register values */
-	buf[0] |= (MAX3107_WRITE_BIT | MAX3107_GPIOCFG_REG);
-	buf[1] |= (MAX3107_WRITE_BIT | MAX3107_GPIODATA_REG);
-	/* Perform SPI transfer */
-	if (max3107_rw(s, (u8 *)buf, NULL, 4)) {
-		dev_err(&s->spi->dev,
-			"SPI transfer for GPIO conf data w failed\n");
-		return -EIO;
-	}
-	return 0;
-}
-
-/* GPIO value query function */
-static int max3107_gpio_get(struct gpio_chip *chip, unsigned offset)
-{
-	struct max3107_port *s = container_of(chip, struct max3107_port, chip);
-	u16 buf[1];	/* Buffer for SPI transfer */
-
-	if (offset >= MAX3107_GPIO_COUNT) {
-		dev_err(&s->spi->dev, "Invalid GPIO\n");
-		return -EINVAL;
-	}
-
-	/* Read current GPIO data register */
-	buf[0] = MAX3107_GPIODATA_REG;
-	/* Perform SPI transfer */
-	if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 2)) {
-		dev_err(&s->spi->dev, "SPI transfer GPIO data r failed\n");
-		return -EIO;
-	}
-	buf[0] &= MAX3107_SPI_RX_DATA_MASK;
-
-	/* Return value */
-	return buf[0] & (0x0001 << offset);
-}
-
-/* GPIO value set function */
-static void max3107_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
-{
-	struct max3107_port *s = container_of(chip, struct max3107_port, chip);
-	u16 buf[2];	/* Buffer for SPI transfers */
-
-	if (offset >= MAX3107_GPIO_COUNT) {
-		dev_err(&s->spi->dev, "Invalid GPIO\n");
-		return;
-	}
-
-	/* Read current GPIO configuration registers*/
-	buf[0] = MAX3107_GPIODATA_REG;
-	buf[1] = MAX3107_GPIOCFG_REG;
-	/* Perform SPI transfer */
-	if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 4)) {
-		dev_err(&s->spi->dev,
-			"SPI transfer for GPIO data and config read failed\n");
-		return;
-	}
-	buf[0] &= MAX3107_SPI_RX_DATA_MASK;
-	buf[1] &= MAX3107_SPI_RX_DATA_MASK;
-
-	if (!(buf[1] & (0x0001 << offset))) {
-		/* Configured as input, can't set value */
-		dev_warn(&s->spi->dev,
-				"Trying to set value for input GPIO\n");
-		return;
-	}
-
-	/* Set value */
-	if (value)
-		buf[0] |= (0x0001 << offset);
-	else
-		buf[0] &= ~(0x0001 << offset);
-
-	/* Write new GPIO data register value */
-	buf[0] |= (MAX3107_WRITE_BIT | MAX3107_GPIODATA_REG);
-	/* Perform SPI transfer */
-	if (max3107_rw(s, (u8 *)buf, NULL, 2))
-		dev_err(&s->spi->dev, "SPI transfer GPIO data w failed\n");
-}
-
-/* GPIO chip data */
-static struct gpio_chip max3107_gpio_chip = {
-	.owner			= THIS_MODULE,
-	.direction_input	= max3107_gpio_direction_in,
-	.direction_output	= max3107_gpio_direction_out,
-	.get			= max3107_gpio_get,
-	.set			= max3107_gpio_set,
-	.can_sleep		= 1,
-	.base			= MAX3107_GPIO_BASE,
-	.ngpio			= MAX3107_GPIO_COUNT,
-};
-
-/**
- *	max3107_aava_reset	-	reset on AAVA systems
- *	@spi: The SPI device we are probing
- *
- *	Reset the device ready for probing.
- */
-
-static int max3107_aava_reset(struct spi_device *spi)
-{
-	/* Reset the chip */
-	if (gpio_request(MAX3107_RESET_GPIO, "max3107")) {
-		pr_err("Requesting RESET GPIO failed\n");
-		return -EIO;
-	}
-	if (gpio_direction_output(MAX3107_RESET_GPIO, 0)) {
-		pr_err("Setting RESET GPIO to 0 failed\n");
-		gpio_free(MAX3107_RESET_GPIO);
-		return -EIO;
-	}
-	msleep(MAX3107_RESET_DELAY);
-	if (gpio_direction_output(MAX3107_RESET_GPIO, 1)) {
-		pr_err("Setting RESET GPIO to 1 failed\n");
-		gpio_free(MAX3107_RESET_GPIO);
-		return -EIO;
-	}
-	gpio_free(MAX3107_RESET_GPIO);
-	msleep(MAX3107_WAKEUP_DELAY);
-	return 0;
-}
-
-static int max3107_aava_configure(struct max3107_port *s)
-{
-	int retval;
-
-	/* Initialize GPIO chip data */
-	s->chip = max3107_gpio_chip;
-	s->chip.label = s->spi->modalias;
-	s->chip.dev = &s->spi->dev;
-
-	/* Add GPIO chip */
-	retval = gpiochip_add(&s->chip);
-	if (retval) {
-		dev_err(&s->spi->dev, "Adding GPIO chip failed\n");
-		return retval;
-	}
-
-	/* Temporary fix for EV2 boot problems, set modem reset to 0 */
-	max3107_gpio_direction_out(&s->chip, 3, 0);
-	return 0;
-}
-
-#if 0
-/* This will get enabled once we have the board stuff merged for this
-   specific case */
-
-static const struct baud_table brg13_ext[] = {
-	{ 300,    MAX3107_BRG13_B300 },
-	{ 600,    MAX3107_BRG13_B600 },
-	{ 1200,   MAX3107_BRG13_B1200 },
-	{ 2400,   MAX3107_BRG13_B2400 },
-	{ 4800,   MAX3107_BRG13_B4800 },
-	{ 9600,   MAX3107_BRG13_B9600 },
-	{ 19200,  MAX3107_BRG13_B19200 },
-	{ 57600,  MAX3107_BRG13_B57600 },
-	{ 115200, MAX3107_BRG13_B115200 },
-	{ 230400, MAX3107_BRG13_B230400 },
-	{ 460800, MAX3107_BRG13_B460800 },
-	{ 921600, MAX3107_BRG13_B921600 },
-	{ 0, 0 }
-};
-
-static void max3107_aava_init(struct max3107_port *s)
-{
-	/*override for AAVA SC specific*/
-	if (mrst_platform_id() == MRST_PLATFORM_AAVA_SC) {
-		if (get_koski_build_id() <= KOSKI_EV2)
-			if (s->ext_clk) {
-				s->brg_cfg = MAX3107_BRG13_B9600;
-				s->baud_tbl = (struct baud_table *)brg13_ext;
-			}
-	}
-}
-#endif
-
-static int __devexit max3107_aava_remove(struct spi_device *spi)
-{
-	struct max3107_port *s = dev_get_drvdata(&spi->dev);
-
-	/* Remove GPIO chip */
-	if (gpiochip_remove(&s->chip))
-		dev_warn(&spi->dev, "Removing GPIO chip failed\n");
-
-	/* Then do the default remove */
-	return max3107_remove(spi);
-}
-
-/* Platform data */
-static struct max3107_plat aava_plat_data = {
-	.loopback               = 0,
-	.ext_clk                = 1,
-/*	.init			= max3107_aava_init, */
-	.configure		= max3107_aava_configure,
-	.hw_suspend		= max3107_hw_susp,
-	.polled_mode            = 0,
-	.poll_time              = 0,
-};
-
-
-static int __devinit max3107_probe_aava(struct spi_device *spi)
-{
-	int err = max3107_aava_reset(spi);
-	if (err < 0)
-		return err;
-	return max3107_probe(spi, &aava_plat_data);
-}
-
-/* Spi driver data */
-static struct spi_driver max3107_driver = {
-	.driver = {
-		.name		= "aava-max3107",
-		.owner		= THIS_MODULE,
-	},
-	.probe		= max3107_probe_aava,
-	.remove		= __devexit_p(max3107_aava_remove),
-	.suspend	= max3107_suspend,
-	.resume		= max3107_resume,
-};
-
-/* Driver init function */
-static int __init max3107_init(void)
-{
-	return spi_register_driver(&max3107_driver);
-}
-
-/* Driver exit function */
-static void __exit max3107_exit(void)
-{
-	spi_unregister_driver(&max3107_driver);
-}
-
-module_init(max3107_init);
-module_exit(max3107_exit);
-
-MODULE_DESCRIPTION("MAX3107 driver");
-MODULE_AUTHOR("Aavamobile");
-MODULE_ALIAS("spi:aava-max3107");
-MODULE_LICENSE("GPL v2");
diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c
index d192dcbb82f5..1c2426931484 100644
--- a/drivers/tty/serial/omap-serial.c
+++ b/drivers/tty/serial/omap-serial.c
@@ -1160,7 +1160,7 @@ static struct uart_driver serial_omap_reg = {
 	.cons		= OMAP_CONSOLE,
 };
 
-#ifdef CONFIG_SUSPEND
+#ifdef CONFIG_PM_SLEEP
 static int serial_omap_suspend(struct device *dev)
 {
 	struct uart_omap_port *up = dev_get_drvdata(dev);
@@ -1521,6 +1521,7 @@ static void serial_omap_mdr1_errataset(struct uart_omap_port *up, u8 mdr1)
 	}
 }
 
+#ifdef CONFIG_PM_RUNTIME
 static void serial_omap_restore_context(struct uart_omap_port *up)
 {
 	if (up->errata & UART_ERRATA_i202_MDR1_ACCESS)
@@ -1550,7 +1551,6 @@ static void serial_omap_restore_context(struct uart_omap_port *up)
 		serial_out(up, UART_OMAP_MDR1, up->mdr1);
 }
 
-#ifdef CONFIG_PM_RUNTIME
 static int serial_omap_runtime_suspend(struct device *dev)
 {
 	struct uart_omap_port *up = dev_get_drvdata(dev);
diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index c7bf31a6a7e7..13056180adf5 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -2348,11 +2348,11 @@ int uart_add_one_port(struct uart_driver *drv, struct uart_port *uport)
 	 */
 	tty_dev = tty_register_device(drv->tty_driver, uport->line, uport->dev);
 	if (likely(!IS_ERR(tty_dev))) {
-		device_init_wakeup(tty_dev, 1);
-		device_set_wakeup_enable(tty_dev, 0);
-	} else
+		device_set_wakeup_capable(tty_dev, 1);
+	} else {
 		printk(KERN_ERR "Cannot register tty device on line %d\n",
 		       uport->line);
+	}
 
 	/*
 	 * Ensure UPF_DEAD is not set.