diff options
Diffstat (limited to 'drivers/tty/serial/8250/8250_omap.c')
| -rw-r--r-- | drivers/tty/serial/8250/8250_omap.c | 23 |
1 files changed, 15 insertions, 8 deletions
diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c index 3ef65cbd2478..6f343ca08440 100644 --- a/drivers/tty/serial/8250/8250_omap.c +++ b/drivers/tty/serial/8250/8250_omap.c @@ -8,10 +8,6 @@ * */ -#if defined(CONFIG_SERIAL_8250_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) -#define SUPPORT_SYSRQ -#endif - #include <linux/clk.h> #include <linux/device.h> #include <linux/io.h> @@ -141,7 +137,7 @@ static void omap8250_set_mctrl(struct uart_port *port, unsigned int mctrl) serial8250_do_set_mctrl(port, mctrl); - if (!up->gpios) { + if (!mctrl_gpio_to_gpiod(up->gpios, UART_GPIO_RTS)) { /* * Turn off autoRTS if RTS is lowered and restore autoRTS * setting if RTS is raised @@ -456,7 +452,8 @@ static void omap_8250_set_termios(struct uart_port *port, up->port.status &= ~(UPSTAT_AUTOCTS | UPSTAT_AUTORTS | UPSTAT_AUTOXOFF); if (termios->c_cflag & CRTSCTS && up->port.flags & UPF_HARD_FLOW && - !up->gpios) { + !mctrl_gpio_to_gpiod(up->gpios, UART_GPIO_RTS) && + !mctrl_gpio_to_gpiod(up->gpios, UART_GPIO_CTS)) { /* Enable AUTOCTS (autoRTS is enabled when RTS is raised) */ up->port.status |= UPSTAT_AUTOCTS | UPSTAT_AUTORTS; priv->efr |= UART_EFR_CTS; @@ -1146,7 +1143,7 @@ static int omap8250_probe(struct platform_device *pdev) if (!priv) return -ENOMEM; - membase = devm_ioremap_nocache(&pdev->dev, regs->start, + membase = devm_ioremap(&pdev->dev, regs->start, resource_size(regs)); if (!membase) return -ENODEV; @@ -1191,6 +1188,7 @@ static int omap8250_probe(struct platform_device *pdev) up.port.throttle = omap_8250_throttle; up.port.unthrottle = omap_8250_unthrottle; up.port.rs485_config = omap_8250_rs485_config; + up.port.has_sysrq = IS_ENABLED(CONFIG_SERIAL_8250_CONSOLE); ret = of_alias_get_id(np, "serial"); if (ret < 0) { @@ -1234,7 +1232,16 @@ static int omap8250_probe(struct platform_device *pdev) device_init_wakeup(&pdev->dev, true); pm_runtime_use_autosuspend(&pdev->dev); - pm_runtime_set_autosuspend_delay(&pdev->dev, -1); + + /* + * Disable runtime PM until autosuspend delay unless specifically + * enabled by the user via sysfs. This is the historic way to + * prevent an unsafe default policy with lossy characters on wake-up. + * For serdev devices this is not needed, the policy can be managed by + * the serdev driver. + */ + if (!of_get_available_child_count(pdev->dev.of_node)) + pm_runtime_set_autosuspend_delay(&pdev->dev, -1); pm_runtime_irq_safe(&pdev->dev); pm_runtime_enable(&pdev->dev); |
