diff options
Diffstat (limited to 'drivers/scsi/lpfc/lpfc_mbox.c')
| -rw-r--r-- | drivers/scsi/lpfc/lpfc_mbox.c | 111 |
1 files changed, 105 insertions, 6 deletions
diff --git a/drivers/scsi/lpfc/lpfc_mbox.c b/drivers/scsi/lpfc/lpfc_mbox.c index a9afd8b94b6a..6c4dce1a30ca 100644 --- a/drivers/scsi/lpfc/lpfc_mbox.c +++ b/drivers/scsi/lpfc/lpfc_mbox.c @@ -1707,7 +1707,8 @@ lpfc_sli4_config(struct lpfc_hba *phba, struct lpfcMboxq *mbox, alloc_len - sizeof(union lpfc_sli4_cfg_shdr); } /* The sub-header is in DMA memory, which needs endian converstion */ - lpfc_sli_pcimem_bcopy(cfg_shdr, cfg_shdr, + if (cfg_shdr) + lpfc_sli_pcimem_bcopy(cfg_shdr, cfg_shdr, sizeof(union lpfc_sli4_cfg_shdr)); return alloc_len; @@ -1747,6 +1748,65 @@ lpfc_sli4_mbox_opcode_get(struct lpfc_hba *phba, struct lpfcMboxq *mbox) } /** + * lpfc_sli4_mbx_read_fcf_record - Allocate and construct read fcf mbox cmd + * @phba: pointer to lpfc hba data structure. + * @fcf_index: index to fcf table. + * + * This routine routine allocates and constructs non-embedded mailbox command + * for reading a FCF table entry refered by @fcf_index. + * + * Return: pointer to the mailbox command constructed if successful, otherwise + * NULL. + **/ +int +lpfc_sli4_mbx_read_fcf_record(struct lpfc_hba *phba, + struct lpfcMboxq *mboxq, + uint16_t fcf_index) +{ + void *virt_addr; + dma_addr_t phys_addr; + uint8_t *bytep; + struct lpfc_mbx_sge sge; + uint32_t alloc_len, req_len; + struct lpfc_mbx_read_fcf_tbl *read_fcf; + + if (!mboxq) + return -ENOMEM; + + req_len = sizeof(struct fcf_record) + + sizeof(union lpfc_sli4_cfg_shdr) + 2 * sizeof(uint32_t); + + /* Set up READ_FCF SLI4_CONFIG mailbox-ioctl command */ + alloc_len = lpfc_sli4_config(phba, mboxq, LPFC_MBOX_SUBSYSTEM_FCOE, + LPFC_MBOX_OPCODE_FCOE_READ_FCF_TABLE, req_len, + LPFC_SLI4_MBX_NEMBED); + + if (alloc_len < req_len) { + lpfc_printf_log(phba, KERN_ERR, LOG_MBOX, + "0291 Allocated DMA memory size (x%x) is " + "less than the requested DMA memory " + "size (x%x)\n", alloc_len, req_len); + return -ENOMEM; + } + + /* Get the first SGE entry from the non-embedded DMA memory. This + * routine only uses a single SGE. + */ + lpfc_sli4_mbx_sge_get(mboxq, 0, &sge); + phys_addr = getPaddr(sge.pa_hi, sge.pa_lo); + virt_addr = mboxq->sge_array->addr[0]; + read_fcf = (struct lpfc_mbx_read_fcf_tbl *)virt_addr; + + /* Set up command fields */ + bf_set(lpfc_mbx_read_fcf_tbl_indx, &read_fcf->u.request, fcf_index); + /* Perform necessary endian conversion */ + bytep = virt_addr + sizeof(union lpfc_sli4_cfg_shdr); + lpfc_sli_pcimem_bcopy(bytep, bytep, sizeof(uint32_t)); + + return 0; +} + +/** * lpfc_request_features: Configure SLI4 REQUEST_FEATURES mailbox * @mboxq: pointer to lpfc mbox command. * @@ -1946,13 +2006,14 @@ lpfc_reg_fcfi(struct lpfc_hba *phba, struct lpfcMboxq *mbox) bf_set(lpfc_reg_fcfi_rq_id1, reg_fcfi, REG_FCF_INVALID_QID); bf_set(lpfc_reg_fcfi_rq_id2, reg_fcfi, REG_FCF_INVALID_QID); bf_set(lpfc_reg_fcfi_rq_id3, reg_fcfi, REG_FCF_INVALID_QID); - bf_set(lpfc_reg_fcfi_info_index, reg_fcfi, phba->fcf.fcf_indx); + bf_set(lpfc_reg_fcfi_info_index, reg_fcfi, + phba->fcf.current_rec.fcf_indx); /* reg_fcf addr mode is bit wise inverted value of fcf addr_mode */ - bf_set(lpfc_reg_fcfi_mam, reg_fcfi, - (~phba->fcf.addr_mode) & 0x3); - if (phba->fcf.fcf_flag & FCF_VALID_VLAN) { + bf_set(lpfc_reg_fcfi_mam, reg_fcfi, (~phba->fcf.addr_mode) & 0x3); + if (phba->fcf.current_rec.vlan_id != 0xFFFF) { bf_set(lpfc_reg_fcfi_vv, reg_fcfi, 1); - bf_set(lpfc_reg_fcfi_vlan_tag, reg_fcfi, phba->fcf.vlan_id); + bf_set(lpfc_reg_fcfi_vlan_tag, reg_fcfi, + phba->fcf.current_rec.vlan_id); } } @@ -1992,3 +2053,41 @@ lpfc_resume_rpi(struct lpfcMboxq *mbox, struct lpfc_nodelist *ndlp) bf_set(lpfc_resume_rpi_ii, resume_rpi, RESUME_INDEX_RPI); resume_rpi->event_tag = ndlp->phba->fc_eventTag; } + +/** + * lpfc_supported_pages - Initialize the PORT_CAPABILITIES supported pages + * mailbox command. + * @mbox: pointer to lpfc mbox command to initialize. + * + * The PORT_CAPABILITIES supported pages mailbox command is issued to + * retrieve the particular feature pages supported by the port. + **/ +void +lpfc_supported_pages(struct lpfcMboxq *mbox) +{ + struct lpfc_mbx_supp_pages *supp_pages; + + memset(mbox, 0, sizeof(*mbox)); + supp_pages = &mbox->u.mqe.un.supp_pages; + bf_set(lpfc_mqe_command, &mbox->u.mqe, MBX_PORT_CAPABILITIES); + bf_set(cpn, supp_pages, LPFC_SUPP_PAGES); +} + +/** + * lpfc_sli4_params - Initialize the PORT_CAPABILITIES SLI4 Params + * mailbox command. + * @mbox: pointer to lpfc mbox command to initialize. + * + * The PORT_CAPABILITIES SLI4 parameters mailbox command is issued to + * retrieve the particular SLI4 features supported by the port. + **/ +void +lpfc_sli4_params(struct lpfcMboxq *mbox) +{ + struct lpfc_mbx_sli4_params *sli4_params; + + memset(mbox, 0, sizeof(*mbox)); + sli4_params = &mbox->u.mqe.un.sli4_params; + bf_set(lpfc_mqe_command, &mbox->u.mqe, MBX_PORT_CAPABILITIES); + bf_set(cpn, sli4_params, LPFC_SLI4_PARAMETERS); +} |
