summaryrefslogtreecommitdiffstats
path: root/drivers/pci/pci.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/pci/pci.c')
-rw-r--r--drivers/pci/pci.c101
1 files changed, 101 insertions, 0 deletions
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index d50c58d6acd3..c5172b01164d 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -2966,6 +2966,107 @@ bool pci_acs_path_enabled(struct pci_dev *start,
}
/**
+ * pci_rebar_find_pos - find position of resize ctrl reg for BAR
+ * @pdev: PCI device
+ * @bar: BAR to find
+ *
+ * Helper to find the position of the ctrl register for a BAR.
+ * Returns -ENOTSUPP if resizable BARs are not supported at all.
+ * Returns -ENOENT if no ctrl register for the BAR could be found.
+ */
+static int pci_rebar_find_pos(struct pci_dev *pdev, int bar)
+{
+ unsigned int pos, nbars, i;
+ u32 ctrl;
+
+ pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_REBAR);
+ if (!pos)
+ return -ENOTSUPP;
+
+ pci_read_config_dword(pdev, pos + PCI_REBAR_CTRL, &ctrl);
+ nbars = (ctrl & PCI_REBAR_CTRL_NBAR_MASK) >>
+ PCI_REBAR_CTRL_NBAR_SHIFT;
+
+ for (i = 0; i < nbars; i++, pos += 8) {
+ int bar_idx;
+
+ pci_read_config_dword(pdev, pos + PCI_REBAR_CTRL, &ctrl);
+ bar_idx = ctrl & PCI_REBAR_CTRL_BAR_IDX;
+ if (bar_idx == bar)
+ return pos;
+ }
+
+ return -ENOENT;
+}
+
+/**
+ * pci_rebar_get_possible_sizes - get possible sizes for BAR
+ * @pdev: PCI device
+ * @bar: BAR to query
+ *
+ * Get the possible sizes of a resizable BAR as bitmask defined in the spec
+ * (bit 0=1MB, bit 19=512GB). Returns 0 if BAR isn't resizable.
+ */
+u32 pci_rebar_get_possible_sizes(struct pci_dev *pdev, int bar)
+{
+ int pos;
+ u32 cap;
+
+ pos = pci_rebar_find_pos(pdev, bar);
+ if (pos < 0)
+ return 0;
+
+ pci_read_config_dword(pdev, pos + PCI_REBAR_CAP, &cap);
+ return (cap & PCI_REBAR_CAP_SIZES) >> 4;
+}
+
+/**
+ * pci_rebar_get_current_size - get the current size of a BAR
+ * @pdev: PCI device
+ * @bar: BAR to set size to
+ *
+ * Read the size of a BAR from the resizable BAR config.
+ * Returns size if found or negative error code.
+ */
+int pci_rebar_get_current_size(struct pci_dev *pdev, int bar)
+{
+ int pos;
+ u32 ctrl;
+
+ pos = pci_rebar_find_pos(pdev, bar);
+ if (pos < 0)
+ return pos;
+
+ pci_read_config_dword(pdev, pos + PCI_REBAR_CTRL, &ctrl);
+ return (ctrl & PCI_REBAR_CTRL_BAR_SIZE) >> 8;
+}
+
+/**
+ * pci_rebar_set_size - set a new size for a BAR
+ * @pdev: PCI device
+ * @bar: BAR to set size to
+ * @size: new size as defined in the spec (0=1MB, 19=512GB)
+ *
+ * Set the new size of a BAR as defined in the spec.
+ * Returns zero if resizing was successful, error code otherwise.
+ */
+int pci_rebar_set_size(struct pci_dev *pdev, int bar, int size)
+{
+ int pos;
+ u32 ctrl;
+
+ pos = pci_rebar_find_pos(pdev, bar);
+ if (pos < 0)
+ return pos;
+
+ pci_read_config_dword(pdev, pos + PCI_REBAR_CTRL, &ctrl);
+ ctrl &= ~PCI_REBAR_CTRL_BAR_SIZE;
+ ctrl |= size << 8;
+ pci_write_config_dword(pdev, pos + PCI_REBAR_CTRL, ctrl);
+ return 0;
+}
+
+/**
* pci_swizzle_interrupt_pin - swizzle INTx for device behind bridge
* @dev: the PCI device
* @pin: the INTx pin (1=INTA, 2=INTB, 3=INTC, 4=INTD)
OpenPOWER on IntegriCloud