summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/wl12xx/wl1271_main.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/wl12xx/wl1271_main.c')
-rw-r--r--drivers/net/wireless/wl12xx/wl1271_main.c492
1 files changed, 311 insertions, 181 deletions
diff --git a/drivers/net/wireless/wl12xx/wl1271_main.c b/drivers/net/wireless/wl12xx/wl1271_main.c
index b62c00ff42fe..e4867b895c43 100644
--- a/drivers/net/wireless/wl12xx/wl1271_main.c
+++ b/drivers/net/wireless/wl12xx/wl1271_main.c
@@ -47,6 +47,8 @@
#include "wl1271_cmd.h"
#include "wl1271_boot.h"
+#define WL1271_BOOT_RETRIES 3
+
static struct conf_drv_settings default_conf = {
.sg = {
.per_threshold = 7500,
@@ -67,16 +69,17 @@ static struct conf_drv_settings default_conf = {
.ps_poll_timeout = 15,
.upsd_timeout = 15,
.rts_threshold = 2347,
- .rx_cca_threshold = 0xFFEF,
- .irq_blk_threshold = 0,
- .irq_pkt_threshold = USHORT_MAX,
- .irq_timeout = 5,
+ .rx_cca_threshold = 0,
+ .irq_blk_threshold = 0xFFFF,
+ .irq_pkt_threshold = 0,
+ .irq_timeout = 600,
.queue_type = CONF_RX_QUEUE_TYPE_LOW_PRIORITY,
},
.tx = {
.tx_energy_detection = 0,
.rc_conf = {
- .enabled_rates = CONF_TX_RATE_MASK_UNSPECIFIED,
+ .enabled_rates = CONF_HW_BIT_RATE_1MBPS |
+ CONF_HW_BIT_RATE_2MBPS,
.short_retry_limit = 10,
.long_retry_limit = 10,
.aflags = 0
@@ -172,8 +175,8 @@ static struct conf_drv_settings default_conf = {
}
},
.frag_threshold = IEEE80211_MAX_FRAG_THRESHOLD,
- .tx_compl_timeout = 5,
- .tx_compl_threshold = 5
+ .tx_compl_timeout = 700,
+ .tx_compl_threshold = 4
},
.conn = {
.wake_up_event = CONF_WAKE_UP_EVENT_DTIM,
@@ -186,12 +189,12 @@ static struct conf_drv_settings default_conf = {
.rule = CONF_BCN_RULE_PASS_ON_APPEARANCE,
}
},
- .synch_fail_thold = 5,
+ .synch_fail_thold = 10,
.bss_lose_timeout = 100,
.beacon_rx_timeout = 10000,
.broadcast_timeout = 20000,
.rx_broadcast_in_ps = 1,
- .ps_poll_threshold = 4,
+ .ps_poll_threshold = 20,
.sig_trigger_count = 2,
.sig_trigger = {
[0] = {
@@ -226,46 +229,35 @@ static struct conf_drv_settings default_conf = {
.psm_entry_retries = 3
},
.init = {
- .sr_err_tbl = {
- [0] = {
- .len = 7,
- .upper_limit = 0x03,
- .values = {
- 0x18, 0x10, 0x05, 0xfb, 0xf0, 0xe8,
- 0x00 }
- },
- [1] = {
- .len = 7,
- .upper_limit = 0x03,
- .values = {
- 0x18, 0x10, 0x05, 0xf6, 0xf0, 0xe8,
- 0x00 }
- },
- [2] = {
- .len = 7,
- .upper_limit = 0x03,
- .values = {
- 0x18, 0x10, 0x05, 0xfb, 0xf0, 0xe8,
- 0x00 }
- }
- },
- .sr_enable = 1,
.genparam = {
.ref_clk = CONF_REF_CLK_38_4_E,
.settling_time = 5,
.clk_valid_on_wakeup = 0,
.dc2dcmode = 0,
.single_dual_band = CONF_SINGLE_BAND,
- .tx_bip_fem_autodetect = 0,
+ .tx_bip_fem_autodetect = 1,
.tx_bip_fem_manufacturer = 1,
.settings = 1,
+ .sr_state = 1,
+ .srf1 = { 0x07, 0x03, 0x18, 0x10, 0x05, 0xfb, 0xf0,
+ 0xe8, 0, 0, 0, 0, 0, 0, 0, 0 },
+ .srf2 = { 0x07, 0x03, 0x18, 0x10, 0x05, 0xfb, 0xf0,
+ 0xe8, 0, 0, 0, 0, 0, 0, 0, 0 },
+ .srf3 = { 0x07, 0x03, 0x18, 0x10, 0x05, 0xfb, 0xf0,
+ 0xe8, 0, 0, 0, 0, 0, 0, 0, 0 },
+ .sr_debug_table = { 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0 },
+ .sr_sen_n_p = 0,
+ .sr_sen_n_p_gain = 0,
+ .sr_sen_nrn = 0,
+ .sr_sen_prn = 0,
},
.radioparam = {
- .rx_trace_loss = 10,
- .tx_trace_loss = 10,
+ .rx_trace_loss = 0x24,
+ .tx_trace_loss = 0x0,
.rx_rssi_and_proc_compens = {
0xec, 0xf6, 0x00, 0x0c, 0x18, 0xf8,
- 0xfc, 0x00, 0x08, 0x10, 0xf0, 0xf8,
+ 0xfc, 0x00, 0x80, 0x10, 0xf0, 0xf8,
0x00, 0x0a, 0x14 },
.rx_trace_loss_5 = { 0, 0, 0, 0, 0, 0, 0 },
.tx_trace_loss_5 = { 0, 0, 0, 0, 0, 0, 0 },
@@ -273,13 +265,15 @@ static struct conf_drv_settings default_conf = {
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00 },
- .tx_ref_pd_voltage = 0x24e,
- .tx_ref_power = 0x78,
+ .tx_ref_pd_voltage = 0x1a9,
+ .tx_ref_power = 0x80,
.tx_offset_db = 0x0,
.tx_rate_limits_normal = {
- 0x1e, 0x1f, 0x22, 0x24, 0x28, 0x29 },
+ 0x1d, 0x1f, 0x24, 0x28, 0x28, 0x29 },
.tx_rate_limits_degraded = {
- 0x1b, 0x1c, 0x1e, 0x20, 0x24, 0x25 },
+ 0x19, 0x1f, 0x22, 0x23, 0x27, 0x28 },
+ .tx_rate_limits_extreme = {
+ 0x19, 0x1c, 0x1e, 0x20, 0x24, 0x25 },
.tx_channel_limits_11b = {
0x22, 0x50, 0x50, 0x50, 0x50, 0x50,
0x50, 0x50, 0x50, 0x50, 0x22, 0x50,
@@ -289,10 +283,12 @@ static struct conf_drv_settings default_conf = {
0x50, 0x50, 0x50, 0x50, 0x20, 0x50,
0x20, 0x50 },
.tx_pdv_rate_offsets = {
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 },
+ 0x07, 0x08, 0x04, 0x02, 0x02, 0x00 },
.tx_ibias = {
- 0x1a, 0x1a, 0x1a, 0x1a, 0x1a, 0x27 },
- .rx_fem_insertion_loss = 0x14,
+ 0x11, 0x11, 0x15, 0x11, 0x15, 0x0f },
+ .rx_fem_insertion_loss = 0x0e,
+ .degraded_low_to_normal_threshold = 0x1e,
+ .degraded_normal_to_high_threshold = 0x2d,
.tx_ref_pd_voltage_5 = {
0x0190, 0x01a4, 0x01c3, 0x01d8,
0x020a, 0x021c },
@@ -304,6 +300,8 @@ static struct conf_drv_settings default_conf = {
0x1b, 0x1e, 0x21, 0x23, 0x27, 0x00 },
.tx_rate_limits_degraded_5 = {
0x1b, 0x1e, 0x21, 0x23, 0x27, 0x00 },
+ .tx_rate_limits_extreme_5 = {
+ 0x1b, 0x1e, 0x21, 0x23, 0x27, 0x00 },
.tx_channel_limits_ofdm_5 = {
0x50, 0x50, 0x50, 0x50, 0x50, 0x50, 0x50, 0x50,
0x50, 0x50, 0x50, 0x50, 0x50, 0x50, 0x50, 0x50,
@@ -315,8 +313,18 @@ static struct conf_drv_settings default_conf = {
.tx_ibias_5 = {
0x10, 0x10, 0x10, 0x10, 0x10, 0x10 },
.rx_fem_insertion_loss_5 = {
- 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10 }
+ 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10 },
+ .degraded_low_to_normal_threshold_5 = 0x00,
+ .degraded_normal_to_high_threshold_5 = 0x00
}
+ },
+ .itrim = {
+ .enable = false,
+ .timeout = 50000,
+ },
+ .pm_config = {
+ .host_clk_settling_time = 5000,
+ .host_fast_wakeup_support = false
}
};
@@ -359,7 +367,7 @@ static int wl1271_plt_init(struct wl1271 *wl)
if (ret < 0)
return ret;
- ret = wl1271_cmd_data_path(wl, wl->channel, 1);
+ ret = wl1271_cmd_data_path(wl, 1);
if (ret < 0)
return ret;
@@ -374,11 +382,13 @@ static void wl1271_disable_interrupts(struct wl1271 *wl)
static void wl1271_power_off(struct wl1271 *wl)
{
wl->set_power(false);
+ clear_bit(WL1271_FLAG_GPIO_POWER, &wl->flags);
}
static void wl1271_power_on(struct wl1271 *wl)
{
wl->set_power(true);
+ set_bit(WL1271_FLAG_GPIO_POWER, &wl->flags);
}
static void wl1271_fw_status(struct wl1271 *wl,
@@ -447,14 +457,13 @@ static void wl1271_irq_work(struct work_struct *work)
intr &= WL1271_INTR_MASK;
if (intr & WL1271_ACX_INTR_EVENT_A) {
- bool do_ack = (intr & WL1271_ACX_INTR_EVENT_B) ? false : true;
wl1271_debug(DEBUG_IRQ, "WL1271_ACX_INTR_EVENT_A");
- wl1271_event_handle(wl, 0, do_ack);
+ wl1271_event_handle(wl, 0);
}
if (intr & WL1271_ACX_INTR_EVENT_B) {
wl1271_debug(DEBUG_IRQ, "WL1271_ACX_INTR_EVENT_B");
- wl1271_event_handle(wl, 1, true);
+ wl1271_event_handle(wl, 1);
}
if (intr & WL1271_ACX_INTR_INIT_COMPLETE)
@@ -614,6 +623,7 @@ static int wl1271_chip_wakeup(struct wl1271 *wl)
struct wl1271_partition_set partition;
int ret = 0;
+ msleep(WL1271_PRE_POWER_ON_SLEEP);
wl1271_power_on(wl);
msleep(WL1271_POWER_ON_SLEEP);
wl1271_spi_reset(wl);
@@ -643,7 +653,7 @@ static int wl1271_chip_wakeup(struct wl1271 *wl)
ret = wl1271_setup(wl);
if (ret < 0)
- goto out_power_off;
+ goto out;
break;
case CHIP_ID_1271_PG20:
wl1271_debug(DEBUG_BOOT, "chip id 0x%x (1271 PG20)",
@@ -651,38 +661,34 @@ static int wl1271_chip_wakeup(struct wl1271 *wl)
ret = wl1271_setup(wl);
if (ret < 0)
- goto out_power_off;
+ goto out;
break;
default:
- wl1271_error("unsupported chip id: 0x%x", wl->chip.id);
+ wl1271_warning("unsupported chip id: 0x%x", wl->chip.id);
ret = -ENODEV;
- goto out_power_off;
+ goto out;
}
if (wl->fw == NULL) {
ret = wl1271_fetch_firmware(wl);
if (ret < 0)
- goto out_power_off;
+ goto out;
}
/* No NVS from netlink, try to get it from the filesystem */
if (wl->nvs == NULL) {
ret = wl1271_fetch_nvs(wl);
if (ret < 0)
- goto out_power_off;
+ goto out;
}
- goto out;
-
-out_power_off:
- wl1271_power_off(wl);
-
out:
return ret;
}
int wl1271_plt_start(struct wl1271 *wl)
{
+ int retries = WL1271_BOOT_RETRIES;
int ret;
mutex_lock(&wl->mutex);
@@ -696,35 +702,48 @@ int wl1271_plt_start(struct wl1271 *wl)
goto out;
}
- wl->state = WL1271_STATE_PLT;
-
- ret = wl1271_chip_wakeup(wl);
- if (ret < 0)
- goto out;
-
- ret = wl1271_boot(wl);
- if (ret < 0)
- goto out_power_off;
-
- wl1271_notice("firmware booted in PLT mode (%s)", wl->chip.fw_ver);
+ while (retries) {
+ retries--;
+ ret = wl1271_chip_wakeup(wl);
+ if (ret < 0)
+ goto power_off;
- ret = wl1271_plt_init(wl);
- if (ret < 0)
- goto out_irq_disable;
+ ret = wl1271_boot(wl);
+ if (ret < 0)
+ goto power_off;
- /* Make sure power saving is disabled */
- ret = wl1271_acx_sleep_auth(wl, WL1271_PSM_CAM);
- if (ret < 0)
- goto out_irq_disable;
+ ret = wl1271_plt_init(wl);
+ if (ret < 0)
+ goto irq_disable;
- goto out;
+ /* Make sure power saving is disabled */
+ ret = wl1271_acx_sleep_auth(wl, WL1271_PSM_CAM);
+ if (ret < 0)
+ goto irq_disable;
-out_irq_disable:
- wl1271_disable_interrupts(wl);
+ wl->state = WL1271_STATE_PLT;
+ wl1271_notice("firmware booted in PLT mode (%s)",
+ wl->chip.fw_ver);
+ goto out;
-out_power_off:
- wl1271_power_off(wl);
+irq_disable:
+ wl1271_disable_interrupts(wl);
+ mutex_unlock(&wl->mutex);
+ /* Unlocking the mutex in the middle of handling is
+ inherently unsafe. In this case we deem it safe to do,
+ because we need to let any possibly pending IRQ out of
+ the system (and while we are WL1271_STATE_OFF the IRQ
+ work function will not do anything.) Also, any other
+ possible concurrent operations will fail due to the
+ current state, hence the wl1271 struct should be safe. */
+ cancel_work_sync(&wl->irq_work);
+ mutex_lock(&wl->mutex);
+power_off:
+ wl1271_power_off(wl);
+ }
+ wl1271_error("firmware boot in PLT mode failed despite %d retries",
+ WL1271_BOOT_RETRIES);
out:
mutex_unlock(&wl->mutex);
@@ -762,7 +781,20 @@ out:
static int wl1271_op_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
{
struct wl1271 *wl = hw->priv;
+ struct ieee80211_conf *conf = &hw->conf;
+ struct ieee80211_tx_info *txinfo = IEEE80211_SKB_CB(skb);
+ struct ieee80211_sta *sta = txinfo->control.sta;
+ unsigned long flags;
+ /* peek into the rates configured in the STA entry */
+ spin_lock_irqsave(&wl->wl_lock, flags);
+ if (sta && sta->supp_rates[conf->channel->band] != wl->sta_rate_set) {
+ wl->sta_rate_set = sta->supp_rates[conf->channel->band];
+ set_bit(WL1271_FLAG_STA_RATES_CHANGED, &wl->flags);
+ }
+ spin_unlock_irqrestore(&wl->wl_lock, flags);
+
+ /* queue the packet */
skb_queue_tail(&wl->tx_queue, skb);
/*
@@ -784,7 +816,7 @@ static int wl1271_op_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
* protected. Maybe fix this by removing the stupid
* variable altogether and checking the real queue state?
*/
- wl->tx_queue_stopped = true;
+ set_bit(WL1271_FLAG_TX_QUEUE_STOPPED, &wl->flags);
}
return NETDEV_TX_OK;
@@ -880,6 +912,7 @@ static struct notifier_block wl1271_dev_notifier = {
static int wl1271_op_start(struct ieee80211_hw *hw)
{
struct wl1271 *wl = hw->priv;
+ int retries = WL1271_BOOT_RETRIES;
int ret = 0;
wl1271_debug(DEBUG_MAC80211, "mac80211 start");
@@ -893,30 +926,42 @@ static int wl1271_op_start(struct ieee80211_hw *hw)
goto out;
}
- ret = wl1271_chip_wakeup(wl);
- if (ret < 0)
- goto out;
-
- ret = wl1271_boot(wl);
- if (ret < 0)
- goto out_power_off;
-
- ret = wl1271_hw_init(wl);
- if (ret < 0)
- goto out_irq_disable;
-
- wl->state = WL1271_STATE_ON;
+ while (retries) {
+ retries--;
+ ret = wl1271_chip_wakeup(wl);
+ if (ret < 0)
+ goto power_off;
- wl1271_info("firmware booted (%s)", wl->chip.fw_ver);
+ ret = wl1271_boot(wl);
+ if (ret < 0)
+ goto power_off;
- goto out;
+ ret = wl1271_hw_init(wl);
+ if (ret < 0)
+ goto irq_disable;
-out_irq_disable:
- wl1271_disable_interrupts(wl);
+ wl->state = WL1271_STATE_ON;
+ wl1271_info("firmware booted (%s)", wl->chip.fw_ver);
+ goto out;
-out_power_off:
- wl1271_power_off(wl);
+irq_disable:
+ wl1271_disable_interrupts(wl);
+ mutex_unlock(&wl->mutex);
+ /* Unlocking the mutex in the middle of handling is
+ inherently unsafe. In this case we deem it safe to do,
+ because we need to let any possibly pending IRQ out of
+ the system (and while we are WL1271_STATE_OFF the IRQ
+ work function will not do anything.) Also, any other
+ possible concurrent operations will fail due to the
+ current state, hence the wl1271 struct should be safe. */
+ cancel_work_sync(&wl->irq_work);
+ mutex_lock(&wl->mutex);
+power_off:
+ wl1271_power_off(wl);
+ }
+ wl1271_error("firmware boot failed despite %d retries",
+ WL1271_BOOT_RETRIES);
out:
mutex_unlock(&wl->mutex);
@@ -944,11 +989,10 @@ static void wl1271_op_stop(struct ieee80211_hw *hw)
WARN_ON(wl->state != WL1271_STATE_ON);
- if (wl->scanning) {
+ if (test_and_clear_bit(WL1271_FLAG_SCANNING, &wl->flags)) {
mutex_unlock(&wl->mutex);
ieee80211_scan_completed(wl->hw, true);
mutex_lock(&wl->mutex);
- wl->scanning = false;
}
wl->state = WL1271_STATE_OFF;
@@ -973,10 +1017,7 @@ static void wl1271_op_stop(struct ieee80211_hw *hw)
wl->band = IEEE80211_BAND_2GHZ;
wl->rx_counter = 0;
- wl->elp = false;
- wl->psm = 0;
wl->psm_entry_retry = 0;
- wl->tx_queue_stopped = false;
wl->power_level = WL1271_DEFAULT_POWER_LEVEL;
wl->tx_blocks_available = 0;
wl->tx_results_count = 0;
@@ -986,7 +1027,9 @@ static void wl1271_op_stop(struct ieee80211_hw *hw)
wl->tx_security_seq_32 = 0;
wl->time_offset = 0;
wl->session_counter = 0;
- wl->joined = false;
+ wl->rate_set = CONF_TX_RATE_MASK_BASIC;
+ wl->sta_rate_set = 0;
+ wl->flags = 0;
for (i = 0; i < NUM_TX_QUEUES; i++)
wl->tx_blocks_freed[i] = 0;
@@ -996,13 +1039,13 @@ static void wl1271_op_stop(struct ieee80211_hw *hw)
}
static int wl1271_op_add_interface(struct ieee80211_hw *hw,
- struct ieee80211_if_init_conf *conf)
+ struct ieee80211_vif *vif)
{
struct wl1271 *wl = hw->priv;
int ret = 0;
wl1271_debug(DEBUG_MAC80211, "mac80211 add interface type %d mac %pM",
- conf->type, conf->mac_addr);
+ vif->type, vif->addr);
mutex_lock(&wl->mutex);
if (wl->vif) {
@@ -1010,9 +1053,9 @@ static int wl1271_op_add_interface(struct ieee80211_hw *hw,
goto out;
}
- wl->vif = conf->vif;
+ wl->vif = vif;
- switch (conf->type) {
+ switch (vif->type) {
case NL80211_IFTYPE_STATION:
wl->bss_type = BSS_TYPE_STA_BSS;
break;
@@ -1032,7 +1075,7 @@ out:
}
static void wl1271_op_remove_interface(struct ieee80211_hw *hw,
- struct ieee80211_if_init_conf *conf)
+ struct ieee80211_vif *vif)
{
struct wl1271 *wl = hw->priv;
@@ -1109,6 +1152,51 @@ out:
}
#endif
+static int wl1271_join_channel(struct wl1271 *wl, int channel)
+{
+ int ret = 0;
+ /* we need to use a dummy BSSID for now */
+ static const u8 dummy_bssid[ETH_ALEN] = { 0x0b, 0xad, 0xde,
+ 0xad, 0xbe, 0xef };
+
+ /* the dummy join is not required for ad-hoc */
+ if (wl->bss_type == BSS_TYPE_IBSS)
+ goto out;
+
+ /* disable mac filter, so we hear everything */
+ wl->rx_config &= ~CFG_BSSID_FILTER_EN;
+
+ wl->channel = channel;
+ memcpy(wl->bssid, dummy_bssid, ETH_ALEN);
+
+ ret = wl1271_cmd_join(wl);
+ if (ret < 0)
+ goto out;
+
+ set_bit(WL1271_FLAG_JOINED, &wl->flags);
+
+out:
+ return ret;
+}
+
+static int wl1271_unjoin_channel(struct wl1271 *wl)
+{
+ int ret;
+
+ /* to stop listening to a channel, we disconnect */
+ ret = wl1271_cmd_disconnect(wl);
+ if (ret < 0)
+ goto out;
+
+ clear_bit(WL1271_FLAG_JOINED, &wl->flags);
+ wl->channel = 0;
+ memset(wl->bssid, 0, ETH_ALEN);
+ wl->rx_config = WL1271_DEFAULT_RX_CONFIG;
+
+out:
+ return ret;
+}
+
static int wl1271_op_config(struct ieee80211_hw *hw, u32 changed)
{
struct wl1271 *wl = hw->priv;
@@ -1117,10 +1205,11 @@ static int wl1271_op_config(struct ieee80211_hw *hw, u32 changed)
channel = ieee80211_frequency_to_channel(conf->channel->center_freq);
- wl1271_debug(DEBUG_MAC80211, "mac80211 config ch %d psm %s power %d",
+ wl1271_debug(DEBUG_MAC80211, "mac80211 config ch %d psm %s power %d %s",
channel,
conf->flags & IEEE80211_CONF_PS ? "on" : "off",
- conf->power_level);
+ conf->power_level,
+ conf->flags & IEEE80211_CONF_IDLE ? "idle" : "in use");
mutex_lock(&wl->mutex);
@@ -1130,34 +1219,44 @@ static int wl1271_op_config(struct ieee80211_hw *hw, u32 changed)
if (ret < 0)
goto out;
- if (channel != wl->channel) {
- /*
- * We assume that the stack will configure the right channel
- * before associating, so we don't need to send a join
- * command here. We will join the right channel when the
- * BSSID changes
- */
- wl->channel = channel;
+ if (changed & IEEE80211_CONF_CHANGE_IDLE) {
+ if (conf->flags & IEEE80211_CONF_IDLE &&
+ test_bit(WL1271_FLAG_JOINED, &wl->flags))
+ wl1271_unjoin_channel(wl);
+ else if (!(conf->flags & IEEE80211_CONF_IDLE))
+ wl1271_join_channel(wl, channel);
+
+ if (conf->flags & IEEE80211_CONF_IDLE) {
+ wl->rate_set = CONF_TX_RATE_MASK_BASIC;
+ wl->sta_rate_set = 0;
+ wl1271_acx_rate_policies(wl);
+ }
}
- if (conf->flags & IEEE80211_CONF_PS && !wl->psm_requested) {
- wl1271_info("psm enabled");
+ /* if the channel changes while joined, join again */
+ if (channel != wl->channel && test_bit(WL1271_FLAG_JOINED, &wl->flags))
+ wl1271_join_channel(wl, channel);
- wl->psm_requested = true;
+ if (conf->flags & IEEE80211_CONF_PS &&
+ !test_bit(WL1271_FLAG_PSM_REQUESTED, &wl->flags)) {
+ set_bit(WL1271_FLAG_PSM_REQUESTED, &wl->flags);
/*
* We enter PSM only if we're already associated.
* If we're not, we'll enter it when joining an SSID,
* through the bss_info_changed() hook.
*/
- ret = wl1271_ps_set_mode(wl, STATION_POWER_SAVE_MODE);
+ if (test_bit(WL1271_FLAG_STA_ASSOCIATED, &wl->flags)) {
+ wl1271_info("psm enabled");
+ ret = wl1271_ps_set_mode(wl, STATION_POWER_SAVE_MODE);
+ }
} else if (!(conf->flags & IEEE80211_CONF_PS) &&
- wl->psm_requested) {
+ test_bit(WL1271_FLAG_PSM_REQUESTED, &wl->flags)) {
wl1271_info("psm disabled");
- wl->psm_requested = false;
+ clear_bit(WL1271_FLAG_PSM_REQUESTED, &wl->flags);
- if (wl->psm)
+ if (test_bit(WL1271_FLAG_PSM, &wl->flags))
ret = wl1271_ps_set_mode(wl, STATION_ACTIVE_MODE);
}
@@ -1440,22 +1539,6 @@ out:
return ret;
}
-static u32 wl1271_enabled_rates_get(struct wl1271 *wl, u64 basic_rate_set)
-{
- struct ieee80211_supported_band *band;
- u32 enabled_rates = 0;
- int bit;
-
- band = wl->hw->wiphy->bands[wl->band];
- for (bit = 0; bit < band->n_bitrates; bit++) {
- if (basic_rate_set & 0x1)
- enabled_rates |= band->bitrates[bit].hw_value;
- basic_rate_set >>= 1;
- }
-
- return enabled_rates;
-}
-
static void wl1271_op_bss_info_changed(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
struct ieee80211_bss_conf *bss_conf,
@@ -1473,9 +1556,68 @@ static void wl1271_op_bss_info_changed(struct ieee80211_hw *hw,
if (ret < 0)
goto out;
+ if ((changed & BSS_CHANGED_BSSID) &&
+ /*
+ * Now we know the correct bssid, so we send a new join command
+ * and enable the BSSID filter
+ */
+ memcmp(wl->bssid, bss_conf->bssid, ETH_ALEN)) {
+ wl->rx_config |= CFG_BSSID_FILTER_EN;
+ memcpy(wl->bssid, bss_conf->bssid, ETH_ALEN);
+ ret = wl1271_cmd_build_null_data(wl);
+ if (ret < 0) {
+ wl1271_warning("cmd buld null data failed %d",
+ ret);
+ goto out_sleep;
+ }
+ ret = wl1271_cmd_join(wl);
+ if (ret < 0) {
+ wl1271_warning("cmd join failed %d", ret);
+ goto out_sleep;
+ }
+ set_bit(WL1271_FLAG_JOINED, &wl->flags);
+ }
+
+ if (wl->bss_type == BSS_TYPE_IBSS) {
+ /* FIXME: This implements rudimentary ad-hoc support -
+ proper templates are on the wish list and notification
+ on when they change. This patch will update the templates
+ on every call to this function. Also, the firmware will not
+ answer to probe-requests as it does not have the proper
+ SSID set in the JOIN command. The probe-response template
+ is set nevertheless, as the FW will ASSERT without it */
+ struct sk_buff *beacon = ieee80211_beacon_get(hw, vif);
+
+ if (beacon) {
+ struct ieee80211_hdr *hdr;
+ ret = wl1271_cmd_template_set(wl, CMD_TEMPL_BEACON,
+ beacon->data,
+ beacon->len);
+
+ if (ret < 0) {
+ dev_kfree_skb(beacon);
+ goto out_sleep;
+ }
+
+ hdr = (struct ieee80211_hdr *) beacon->data;
+ hdr->frame_control = cpu_to_le16(
+ IEEE80211_FTYPE_MGMT |
+ IEEE80211_STYPE_PROBE_RESP);
+
+ ret = wl1271_cmd_template_set(wl,
+ CMD_TEMPL_PROBE_RESPONSE,
+ beacon->data,
+ beacon->len);
+ dev_kfree_skb(beacon);
+ if (ret < 0)
+ goto out_sleep;
+ }
+ }
+
if (changed & BSS_CHANGED_ASSOC) {
if (bss_conf->assoc) {
wl->aid = bss_conf->aid;
+ set_bit(WL1271_FLAG_STA_ASSOCIATED, &wl->flags);
/*
* with wl1271, we don't need to update the
@@ -1492,7 +1634,8 @@ static void wl1271_op_bss_info_changed(struct ieee80211_hw *hw,
goto out_sleep;
/* If we want to go in PSM but we're not there yet */
- if (wl->psm_requested && !wl->psm) {
+ if (test_bit(WL1271_FLAG_PSM_REQUESTED, &wl->flags) &&
+ !test_bit(WL1271_FLAG_PSM, &wl->flags)) {
mode = STATION_POWER_SAVE_MODE;
ret = wl1271_ps_set_mode(wl, mode);
if (ret < 0)
@@ -1500,7 +1643,7 @@ static void wl1271_op_bss_info_changed(struct ieee80211_hw *hw,
}
} else {
/* use defaults when not associated */
- wl->basic_rate_set = WL1271_DEFAULT_BASIC_RATE_SET;
+ clear_bit(WL1271_FLAG_STA_ASSOCIATED, &wl->flags);
wl->aid = 0;
}
@@ -1535,17 +1678,6 @@ static void wl1271_op_bss_info_changed(struct ieee80211_hw *hw,
}
}
- if (changed & BSS_CHANGED_BASIC_RATES) {
- wl->basic_rate_set = wl1271_enabled_rates_get(
- wl, bss_conf->basic_rates);
-
- ret = wl1271_acx_rate_policies(wl, wl->basic_rate_set);
- if (ret < 0) {
- wl1271_warning("Set rate policies failed %d", ret);
- goto out_sleep;
- }
- }
-
out_sleep:
wl1271_ps_elp_sleep(wl);
@@ -1599,19 +1731,19 @@ static struct ieee80211_rate wl1271_rates[] = {
/* can't be const, mac80211 writes to this */
static struct ieee80211_channel wl1271_channels[] = {
- { .hw_value = 1, .center_freq = 2412},
- { .hw_value = 2, .center_freq = 2417},
- { .hw_value = 3, .center_freq = 2422},
- { .hw_value = 4, .center_freq = 2427},
- { .hw_value = 5, .center_freq = 2432},
- { .hw_value = 6, .center_freq = 2437},
- { .hw_value = 7, .center_freq = 2442},
- { .hw_value = 8, .center_freq = 2447},
- { .hw_value = 9, .center_freq = 2452},
- { .hw_value = 10, .center_freq = 2457},
- { .hw_value = 11, .center_freq = 2462},
- { .hw_value = 12, .center_freq = 2467},
- { .hw_value = 13, .center_freq = 2472},
+ { .hw_value = 1, .center_freq = 2412, .max_power = 25 },
+ { .hw_value = 2, .center_freq = 2417, .max_power = 25 },
+ { .hw_value = 3, .center_freq = 2422, .max_power = 25 },
+ { .hw_value = 4, .center_freq = 2427, .max_power = 25 },
+ { .hw_value = 5, .center_freq = 2432, .max_power = 25 },
+ { .hw_value = 6, .center_freq = 2437, .max_power = 25 },
+ { .hw_value = 7, .center_freq = 2442, .max_power = 25 },
+ { .hw_value = 8, .center_freq = 2447, .max_power = 25 },
+ { .hw_value = 9, .center_freq = 2452, .max_power = 25 },
+ { .hw_value = 10, .center_freq = 2457, .max_power = 25 },
+ { .hw_value = 11, .center_freq = 2462, .max_power = 25 },
+ { .hw_value = 12, .center_freq = 2467, .max_power = 25 },
+ { .hw_value = 13, .center_freq = 2472, .max_power = 25 },
};
/* can't be const, mac80211 writes to this */
@@ -1757,7 +1889,8 @@ static int wl1271_init_ieee80211(struct wl1271 *wl)
IEEE80211_HW_BEACON_FILTER |
IEEE80211_HW_SUPPORTS_PS;
- wl->hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION);
+ wl->hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) |
+ BIT(NL80211_IFTYPE_ADHOC);
wl->hw->wiphy->max_scan_ssids = 1;
wl->hw->wiphy->bands[IEEE80211_BAND_2GHZ] = &wl1271_band_2ghz;
@@ -1818,21 +1951,18 @@ static int __devinit wl1271_probe(struct spi_device *spi)
INIT_DELAYED_WORK(&wl->elp_work, wl1271_elp_work);
wl->channel = WL1271_DEFAULT_CHANNEL;
- wl->scanning = false;
wl->default_key = 0;
wl->rx_counter = 0;
wl->rx_config = WL1271_DEFAULT_RX_CONFIG;
wl->rx_filter = WL1271_DEFAULT_RX_FILTER;
- wl->elp = false;
- wl->psm = 0;
- wl->psm_requested = false;
wl->psm_entry_retry = 0;
- wl->tx_queue_stopped = false;
wl->power_level = WL1271_DEFAULT_POWER_LEVEL;
- wl->basic_rate_set = WL1271_DEFAULT_BASIC_RATE_SET;
+ wl->basic_rate_set = CONF_TX_RATE_MASK_BASIC;
+ wl->rate_set = CONF_TX_RATE_MASK_BASIC;
+ wl->sta_rate_set = 0;
wl->band = IEEE80211_BAND_2GHZ;
wl->vif = NULL;
- wl->joined = false;
+ wl->flags = 0;
for (i = 0; i < ACX_TX_DESCRIPTORS; i++)
wl->tx_frames[i] = NULL;
OpenPOWER on IntegriCloud