diff options
Diffstat (limited to 'drivers/net/phy/phy_device.c')
| -rw-r--r-- | drivers/net/phy/phy_device.c | 442 |
1 files changed, 327 insertions, 115 deletions
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c index 27ebc2c6c2d0..6a5056e0ae77 100644 --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c @@ -27,6 +27,7 @@ #include <linux/bitmap.h> #include <linux/phy.h> #include <linux/phy_led_triggers.h> +#include <linux/sfp.h> #include <linux/mdio.h> #include <linux/io.h> #include <linux/uaccess.h> @@ -488,7 +489,7 @@ static int phy_bus_match(struct device *dev, struct device_driver *drv) if (phydev->is_c45) { for (i = 1; i < num_ids; i++) { - if (!(phydev->c45_ids.devices_in_package & (1 << i))) + if (phydev->c45_ids.device_ids[i] == 0xffffffff) continue; if ((phydrv->phy_id & phydrv->phy_id_mask) == @@ -552,7 +553,7 @@ static const struct device_type mdio_bus_phy_type = { .pm = MDIO_BUS_PHY_PM_OPS, }; -static int phy_request_driver_module(struct phy_device *dev, int phy_id) +static int phy_request_driver_module(struct phy_device *dev, u32 phy_id) { int ret; @@ -564,15 +565,15 @@ static int phy_request_driver_module(struct phy_device *dev, int phy_id) * then modprobe isn't available. */ if (IS_ENABLED(CONFIG_MODULES) && ret < 0 && ret != -ENOENT) { - phydev_err(dev, "error %d loading PHY driver module for ID 0x%08x\n", - ret, phy_id); + phydev_err(dev, "error %d loading PHY driver module for ID 0x%08lx\n", + ret, (unsigned long)phy_id); return ret; } return 0; } -struct phy_device *phy_device_create(struct mii_bus *bus, int addr, int phy_id, +struct phy_device *phy_device_create(struct mii_bus *bus, int addr, u32 phy_id, bool is_c45, struct phy_c45_device_ids *c45_ids) { @@ -596,8 +597,8 @@ struct phy_device *phy_device_create(struct mii_bus *bus, int addr, int phy_id, mdiodev->device_free = phy_mdio_device_free; mdiodev->device_remove = phy_mdio_device_remove; - dev->speed = 0; - dev->duplex = -1; + dev->speed = SPEED_UNKNOWN; + dev->duplex = DUPLEX_UNKNOWN; dev->pause = 0; dev->asym_pause = 0; dev->link = 0; @@ -632,7 +633,7 @@ struct phy_device *phy_device_create(struct mii_bus *bus, int addr, int phy_id, int i; for (i = 1; i < num_ids; i++) { - if (!(c45_ids->devices_in_package & (1 << i))) + if (c45_ids->device_ids[i] == 0xffffffff) continue; ret = phy_request_driver_module(dev, @@ -812,10 +813,13 @@ static int get_phy_id(struct mii_bus *bus, int addr, u32 *phy_id, */ struct phy_device *get_phy_device(struct mii_bus *bus, int addr, bool is_c45) { - struct phy_c45_device_ids c45_ids = {0}; + struct phy_c45_device_ids c45_ids; u32 phy_id = 0; int r; + c45_ids.devices_in_package = 0; + memset(c45_ids.device_ids, 0xff, sizeof(c45_ids.device_ids)); + r = get_phy_id(bus, addr, &phy_id, is_c45, &c45_ids); if (r) return ERR_PTR(r); @@ -877,6 +881,9 @@ EXPORT_SYMBOL(phy_device_register); */ void phy_device_remove(struct phy_device *phydev) { + if (phydev->mii_ts) + unregister_mii_timestamper(phydev->mii_ts); + device_del(&phydev->mdio.dev); /* Assert the reset signal */ @@ -915,6 +922,8 @@ static void phy_link_change(struct phy_device *phydev, bool up, bool do_carrier) netif_carrier_off(netdev); } phydev->adjust_link(netdev); + if (phydev->mii_ts && phydev->mii_ts->link_state) + phydev->mii_ts->link_state(phydev->mii_ts, phydev); } /** @@ -1098,9 +1107,8 @@ void phy_attached_info(struct phy_device *phydev) EXPORT_SYMBOL(phy_attached_info); #define ATTACHED_FMT "attached PHY driver [%s] (mii_bus:phy_addr=%s, irq=%s)" -void phy_attached_print(struct phy_device *phydev, const char *fmt, ...) +char *phy_attached_info_irq(struct phy_device *phydev) { - const char *drv_name = phydev->drv ? phydev->drv->name : "unbound"; char *irq_str; char irq_num[8]; @@ -1117,6 +1125,14 @@ void phy_attached_print(struct phy_device *phydev, const char *fmt, ...) break; } + return kasprintf(GFP_KERNEL, "%s", irq_str); +} +EXPORT_SYMBOL(phy_attached_info_irq); + +void phy_attached_print(struct phy_device *phydev, const char *fmt, ...) +{ + const char *drv_name = phydev->drv ? phydev->drv->name : "unbound"; + char *irq_str = phy_attached_info_irq(phydev); if (!fmt) { phydev_info(phydev, ATTACHED_FMT "\n", @@ -1133,6 +1149,7 @@ void phy_attached_print(struct phy_device *phydev, const char *fmt, ...) vprintk(fmt, ap); va_end(ap); } + kfree(irq_str); } EXPORT_SYMBOL(phy_attached_print); @@ -1175,6 +1192,65 @@ phy_standalone_show(struct device *dev, struct device_attribute *attr, static DEVICE_ATTR_RO(phy_standalone); /** + * phy_sfp_attach - attach the SFP bus to the PHY upstream network device + * @upstream: pointer to the phy device + * @bus: sfp bus representing cage being attached + * + * This is used to fill in the sfp_upstream_ops .attach member. + */ +void phy_sfp_attach(void *upstream, struct sfp_bus *bus) +{ + struct phy_device *phydev = upstream; + + if (phydev->attached_dev) + phydev->attached_dev->sfp_bus = bus; + phydev->sfp_bus_attached = true; +} +EXPORT_SYMBOL(phy_sfp_attach); + +/** + * phy_sfp_detach - detach the SFP bus from the PHY upstream network device + * @upstream: pointer to the phy device + * @bus: sfp bus representing cage being attached + * + * This is used to fill in the sfp_upstream_ops .detach member. + */ +void phy_sfp_detach(void *upstream, struct sfp_bus *bus) +{ + struct phy_device *phydev = upstream; + + if (phydev->attached_dev) + phydev->attached_dev->sfp_bus = NULL; + phydev->sfp_bus_attached = false; +} +EXPORT_SYMBOL(phy_sfp_detach); + +/** + * phy_sfp_probe - probe for a SFP cage attached to this PHY device + * @phydev: Pointer to phy_device + * @ops: SFP's upstream operations + */ +int phy_sfp_probe(struct phy_device *phydev, + const struct sfp_upstream_ops *ops) +{ + struct sfp_bus *bus; + int ret; + + if (phydev->mdio.dev.fwnode) { + bus = sfp_bus_find_fwnode(phydev->mdio.dev.fwnode); + if (IS_ERR(bus)) + return PTR_ERR(bus); + + phydev->sfp_bus = bus; + + ret = sfp_bus_add_upstream(bus, phydev, ops); + sfp_bus_put(bus); + } + return 0; +} +EXPORT_SYMBOL(phy_sfp_probe); + +/** * phy_attach_direct - attach a network device to a given PHY device pointer * @dev: network device to attach * @phydev: Pointer to phy_device to attach @@ -1249,6 +1325,9 @@ int phy_attach_direct(struct net_device *dev, struct phy_device *phydev, if (dev) { phydev->attached_dev = dev; dev->phydev = phydev; + + if (phydev->sfp_bus_attached) + dev->sfp_bus = phydev->sfp_bus; } /* Some Ethernet drivers try to connect to a PHY device before @@ -1270,7 +1349,7 @@ int phy_attach_direct(struct net_device *dev, struct phy_device *phydev, phydev_err(phydev, "error creating 'phy_standalone' sysfs entry\n"); } - phydev->dev_flags = flags; + phydev->dev_flags |= flags; phydev->interface = interface; @@ -1564,24 +1643,20 @@ EXPORT_SYMBOL(phy_reset_after_clk_enable); */ static int genphy_config_advert(struct phy_device *phydev) { - u32 advertise; - int bmsr, adv; - int err, changed = 0; + int err, bmsr, changed = 0; + u32 adv; /* Only allow advertising what this PHY supports */ linkmode_and(phydev->advertising, phydev->advertising, phydev->supported); - if (!ethtool_convert_link_mode_to_legacy_u32(&advertise, - phydev->advertising)) - phydev_warn(phydev, "PHY advertising (%*pb) more modes than genphy supports, some modes not advertised.\n", - __ETHTOOL_LINK_MODE_MASK_NBITS, - phydev->advertising); + + adv = linkmode_adv_to_mii_adv_t(phydev->advertising); /* Setup standard advertisement */ err = phy_modify_changed(phydev, MII_ADVERTISE, ADVERTISE_ALL | ADVERTISE_100BASE4 | ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM, - ethtool_adv_to_mii_adv_t(advertise)); + adv); if (err < 0) return err; if (err > 0) @@ -1598,13 +1673,7 @@ static int genphy_config_advert(struct phy_device *phydev) if (!(bmsr & BMSR_ESTATEN)) return changed; - /* Configure gigabit if it's supported */ - adv = 0; - if (linkmode_test_bit(ETHTOOL_LINK_MODE_1000baseT_Half_BIT, - phydev->supported) || - linkmode_test_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT, - phydev->supported)) - adv = ethtool_adv_to_mii_ctrl1000_t(advertise); + adv = linkmode_adv_to_mii_ctrl1000_t(phydev->advertising); err = phy_modify_changed(phydev, MII_CTRL1000, ADVERTISE_1000FULL | ADVERTISE_1000HALF, @@ -1618,6 +1687,40 @@ static int genphy_config_advert(struct phy_device *phydev) } /** + * genphy_c37_config_advert - sanitize and advertise auto-negotiation parameters + * @phydev: target phy_device struct + * + * Description: Writes MII_ADVERTISE with the appropriate values, + * after sanitizing the values to make sure we only advertise + * what is supported. Returns < 0 on error, 0 if the PHY's advertisement + * hasn't changed, and > 0 if it has changed. This function is intended + * for Clause 37 1000Base-X mode. + */ +static int genphy_c37_config_advert(struct phy_device *phydev) +{ + u16 adv = 0; + + /* Only allow advertising what this PHY supports */ + linkmode_and(phydev->advertising, phydev->advertising, + phydev->supported); + + if (linkmode_test_bit(ETHTOOL_LINK_MODE_1000baseX_Full_BIT, + phydev->advertising)) + adv |= ADVERTISE_1000XFULL; + if (linkmode_test_bit(ETHTOOL_LINK_MODE_Pause_BIT, + phydev->advertising)) + adv |= ADVERTISE_1000XPAUSE; + if (linkmode_test_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, + phydev->advertising)) + adv |= ADVERTISE_1000XPSE_ASYM; + + return phy_modify_changed(phydev, MII_ADVERTISE, + ADVERTISE_1000XFULL | ADVERTISE_1000XPAUSE | + ADVERTISE_1000XHALF | ADVERTISE_1000XPSE_ASYM, + adv); +} + +/** * genphy_config_eee_advert - disable unwanted eee mode advertisement * @phydev: target phy_device struct * @@ -1681,18 +1784,50 @@ int genphy_restart_aneg(struct phy_device *phydev) EXPORT_SYMBOL(genphy_restart_aneg); /** - * genphy_config_aneg - restart auto-negotiation or write BMCR + * genphy_check_and_restart_aneg - Enable and restart auto-negotiation * @phydev: target phy_device struct + * @restart: whether aneg restart is requested + * + * Check, and restart auto-negotiation if needed. + */ +int genphy_check_and_restart_aneg(struct phy_device *phydev, bool restart) +{ + int ret = 0; + + if (!restart) { + /* Advertisement hasn't changed, but maybe aneg was never on to + * begin with? Or maybe phy was isolated? + */ + ret = phy_read(phydev, MII_BMCR); + if (ret < 0) + return ret; + + if (!(ret & BMCR_ANENABLE) || (ret & BMCR_ISOLATE)) + restart = true; + } + + if (restart) + ret = genphy_restart_aneg(phydev); + + return ret; +} +EXPORT_SYMBOL(genphy_check_and_restart_aneg); + +/** + * __genphy_config_aneg - restart auto-negotiation or write BMCR + * @phydev: target phy_device struct + * @changed: whether autoneg is requested * * Description: If auto-negotiation is enabled, we configure the * advertising, and then restart auto-negotiation. If it is not * enabled, then we write the BMCR. */ -int genphy_config_aneg(struct phy_device *phydev) +int __genphy_config_aneg(struct phy_device *phydev, bool changed) { - int err, changed; + int err; - changed = genphy_config_eee_advert(phydev); + if (genphy_config_eee_advert(phydev)) + changed = true; if (AUTONEG_ENABLE != phydev->autoneg) return genphy_setup_forced(phydev); @@ -1700,10 +1835,39 @@ int genphy_config_aneg(struct phy_device *phydev) err = genphy_config_advert(phydev); if (err < 0) /* error */ return err; + else if (err) + changed = true; + + return genphy_check_and_restart_aneg(phydev, changed); +} +EXPORT_SYMBOL(__genphy_config_aneg); + +/** + * genphy_c37_config_aneg - restart auto-negotiation or write BMCR + * @phydev: target phy_device struct + * + * Description: If auto-negotiation is enabled, we configure the + * advertising, and then restart auto-negotiation. If it is not + * enabled, then we write the BMCR. This function is intended + * for use with Clause 37 1000Base-X mode. + */ +int genphy_c37_config_aneg(struct phy_device *phydev) +{ + int err, changed; + + if (phydev->autoneg != AUTONEG_ENABLE) + return genphy_setup_forced(phydev); + + err = phy_modify(phydev, MII_BMCR, BMCR_SPEED1000 | BMCR_SPEED100, + BMCR_SPEED1000); + if (err) + return err; - changed |= err; + changed = genphy_c37_config_advert(phydev); + if (changed < 0) /* error */ + return changed; - if (changed == 0) { + if (!changed) { /* Advertisement hasn't changed, but maybe aneg was never on to * begin with? Or maybe phy was isolated? */ @@ -1724,7 +1888,7 @@ int genphy_config_aneg(struct phy_device *phydev) return 0; } -EXPORT_SYMBOL(genphy_config_aneg); +EXPORT_SYMBOL(genphy_c37_config_aneg); /** * genphy_aneg_done - return auto-negotiation status @@ -1794,6 +1958,83 @@ done: } EXPORT_SYMBOL(genphy_update_link); +int genphy_read_lpa(struct phy_device *phydev) +{ + int lpa, lpagb; + + if (phydev->autoneg == AUTONEG_ENABLE) { + if (!phydev->autoneg_complete) { + mii_stat1000_mod_linkmode_lpa_t(phydev->lp_advertising, + 0); + mii_lpa_mod_linkmode_lpa_t(phydev->lp_advertising, 0); + return 0; + } + + if (phydev->is_gigabit_capable) { + lpagb = phy_read(phydev, MII_STAT1000); + if (lpagb < 0) + return lpagb; + + if (lpagb & LPA_1000MSFAIL) { + int adv = phy_read(phydev, MII_CTRL1000); + + if (adv < 0) + return adv; + + if (adv & CTL1000_ENABLE_MASTER) + phydev_err(phydev, "Master/Slave resolution failed, maybe conflicting manual settings?\n"); + else + phydev_err(phydev, "Master/Slave resolution failed\n"); + return -ENOLINK; + } + + mii_stat1000_mod_linkmode_lpa_t(phydev->lp_advertising, + lpagb); + } + + lpa = phy_read(phydev, MII_LPA); + if (lpa < 0) + return lpa; + + mii_lpa_mod_linkmode_lpa_t(phydev->lp_advertising, lpa); + } else { + linkmode_zero(phydev->lp_advertising); + } + + return 0; +} +EXPORT_SYMBOL(genphy_read_lpa); + +/** + * genphy_read_status_fixed - read the link parameters for !aneg mode + * @phydev: target phy_device struct + * + * Read the current duplex and speed state for a PHY operating with + * autonegotiation disabled. + */ +int genphy_read_status_fixed(struct phy_device *phydev) +{ + int bmcr = phy_read(phydev, MII_BMCR); + + if (bmcr < 0) + return bmcr; + + if (bmcr & BMCR_FULLDPLX) + phydev->duplex = DUPLEX_FULL; + else + phydev->duplex = DUPLEX_HALF; + + if (bmcr & BMCR_SPEED1000) + phydev->speed = SPEED_1000; + else if (bmcr & BMCR_SPEED100) + phydev->speed = SPEED_100; + else + phydev->speed = SPEED_10; + + return 0; +} +EXPORT_SYMBOL(genphy_read_status_fixed); + /** * genphy_read_status - check the link status and update current link state * @phydev: target phy_device struct @@ -1805,7 +2046,7 @@ EXPORT_SYMBOL(genphy_update_link); */ int genphy_read_status(struct phy_device *phydev) { - int adv, lpa, lpagb, err, old_link = phydev->link; + int err, old_link = phydev->link; /* Update the link, but return if there was an error */ err = genphy_update_link(phydev); @@ -1821,35 +2062,62 @@ int genphy_read_status(struct phy_device *phydev) phydev->pause = 0; phydev->asym_pause = 0; - linkmode_zero(phydev->lp_advertising); + err = genphy_read_lpa(phydev); + if (err < 0) + return err; if (phydev->autoneg == AUTONEG_ENABLE && phydev->autoneg_complete) { - if (phydev->is_gigabit_capable) { - lpagb = phy_read(phydev, MII_STAT1000); - if (lpagb < 0) - return lpagb; + phy_resolve_aneg_linkmode(phydev); + } else if (phydev->autoneg == AUTONEG_DISABLE) { + err = genphy_read_status_fixed(phydev); + if (err < 0) + return err; + } - adv = phy_read(phydev, MII_CTRL1000); - if (adv < 0) - return adv; + return 0; +} +EXPORT_SYMBOL(genphy_read_status); - if (lpagb & LPA_1000MSFAIL) { - if (adv & CTL1000_ENABLE_MASTER) - phydev_err(phydev, "Master/Slave resolution failed, maybe conflicting manual settings?\n"); - else - phydev_err(phydev, "Master/Slave resolution failed\n"); - return -ENOLINK; - } +/** + * genphy_c37_read_status - check the link status and update current link state + * @phydev: target phy_device struct + * + * Description: Check the link, then figure out the current state + * by comparing what we advertise with what the link partner + * advertises. This function is for Clause 37 1000Base-X mode. + */ +int genphy_c37_read_status(struct phy_device *phydev) +{ + int lpa, err, old_link = phydev->link; - mii_stat1000_mod_linkmode_lpa_t(phydev->lp_advertising, - lpagb); - } + /* Update the link, but return if there was an error */ + err = genphy_update_link(phydev); + if (err) + return err; + /* why bother the PHY if nothing can have changed */ + if (phydev->autoneg == AUTONEG_ENABLE && old_link && phydev->link) + return 0; + + phydev->duplex = DUPLEX_UNKNOWN; + phydev->pause = 0; + phydev->asym_pause = 0; + + if (phydev->autoneg == AUTONEG_ENABLE && phydev->autoneg_complete) { lpa = phy_read(phydev, MII_LPA); if (lpa < 0) return lpa; - mii_lpa_mod_linkmode_lpa_t(phydev->lp_advertising, lpa); + linkmode_mod_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, + phydev->lp_advertising, lpa & LPA_LPACK); + linkmode_mod_bit(ETHTOOL_LINK_MODE_1000baseX_Full_BIT, + phydev->lp_advertising, lpa & LPA_1000XFULL); + linkmode_mod_bit(ETHTOOL_LINK_MODE_Pause_BIT, + phydev->lp_advertising, lpa & LPA_1000XPAUSE); + linkmode_mod_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, + phydev->lp_advertising, + lpa & LPA_1000XPAUSE_ASYM); + phy_resolve_aneg_linkmode(phydev); } else if (phydev->autoneg == AUTONEG_DISABLE) { int bmcr = phy_read(phydev, MII_BMCR); @@ -1861,18 +2129,11 @@ int genphy_read_status(struct phy_device *phydev) phydev->duplex = DUPLEX_FULL; else phydev->duplex = DUPLEX_HALF; - - if (bmcr & BMCR_SPEED1000) - phydev->speed = SPEED_1000; - else if (bmcr & BMCR_SPEED100) - phydev->speed = SPEED_100; - else - phydev->speed = SPEED_10; } return 0; } -EXPORT_SYMBOL(genphy_read_status); +EXPORT_SYMBOL(genphy_c37_read_status); /** * genphy_soft_reset - software reset the PHY via BMCR_RESET bit @@ -1907,57 +2168,6 @@ int genphy_soft_reset(struct phy_device *phydev) } EXPORT_SYMBOL(genphy_soft_reset); -int genphy_config_init(struct phy_device *phydev) -{ - int val; - __ETHTOOL_DECLARE_LINK_MODE_MASK(features) = { 0, }; - - linkmode_set_bit_array(phy_basic_ports_array, - ARRAY_SIZE(phy_basic_ports_array), - features); - linkmode_set_bit(ETHTOOL_LINK_MODE_Pause_BIT, features); - linkmode_set_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, features); - - /* Do we support autonegotiation? */ - val = phy_read(phydev, MII_BMSR); - if (val < 0) - return val; - - if (val & BMSR_ANEGCAPABLE) - linkmode_set_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, features); - - if (val & BMSR_100FULL) - linkmode_set_bit(ETHTOOL_LINK_MODE_100baseT_Full_BIT, features); - if (val & BMSR_100HALF) - linkmode_set_bit(ETHTOOL_LINK_MODE_100baseT_Half_BIT, features); - if (val & BMSR_10FULL) - linkmode_set_bit(ETHTOOL_LINK_MODE_10baseT_Full_BIT, features); - if (val & BMSR_10HALF) - linkmode_set_bit(ETHTOOL_LINK_MODE_10baseT_Half_BIT, features); - - if (val & BMSR_ESTATEN) { - val = phy_read(phydev, MII_ESTATUS); - if (val < 0) - return val; - - if (val & ESTATUS_1000_TFULL) - linkmode_set_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT, - features); - if (val & ESTATUS_1000_THALF) - linkmode_set_bit(ETHTOOL_LINK_MODE_1000baseT_Half_BIT, - features); - if (val & ESTATUS_1000_XFULL) - linkmode_set_bit(ETHTOOL_LINK_MODE_1000baseX_Full_BIT, - features); - } - - linkmode_and(phydev->supported, phydev->supported, features); - linkmode_and(phydev->advertising, phydev->advertising, features); - - return 0; -} -EXPORT_SYMBOL(genphy_config_init); - /** * genphy_read_abilities - read PHY abilities from Clause 22 registers * @phydev: target phy_device struct @@ -2318,6 +2528,9 @@ static int phy_remove(struct device *dev) phydev->state = PHY_DOWN; mutex_unlock(&phydev->lock); + sfp_bus_del_upstream(phydev->sfp_bus); + phydev->sfp_bus = NULL; + if (phydev->drv && phydev->drv->remove) { phydev->drv->remove(phydev); @@ -2406,7 +2619,6 @@ static struct phy_driver genphy_driver = { .name = "Generic PHY", .soft_reset = genphy_no_soft_reset, .get_features = genphy_read_abilities, - .aneg_done = genphy_aneg_done, .suspend = genphy_suspend, .resume = genphy_resume, .set_loopback = genphy_loopback, |
