diff options
Diffstat (limited to 'drivers/net/ethernet/broadcom/bnx2x/bnx2x_init.h')
| -rw-r--r-- | drivers/net/ethernet/broadcom/bnx2x/bnx2x_init.h | 567 |
1 files changed, 567 insertions, 0 deletions
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_init.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_init.h new file mode 100644 index 000000000000..4d748e77d1ac --- /dev/null +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_init.h @@ -0,0 +1,567 @@ +/* bnx2x_init.h: Broadcom Everest network driver. + * Structures and macroes needed during the initialization. + * + * Copyright (c) 2007-2011 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation. + * + * Maintained by: Eilon Greenstein <eilong@broadcom.com> + * Written by: Eliezer Tamir + * Modified by: Vladislav Zolotarov <vladz@broadcom.com> + */ + +#ifndef BNX2X_INIT_H +#define BNX2X_INIT_H + +/* Init operation types and structures */ +enum { + OP_RD = 0x1, /* read a single register */ + OP_WR, /* write a single register */ + OP_SW, /* copy a string to the device */ + OP_ZR, /* clear memory */ + OP_ZP, /* unzip then copy with DMAE */ + OP_WR_64, /* write 64 bit pattern */ + OP_WB, /* copy a string using DMAE */ + OP_WB_ZR, /* Clear a string using DMAE or indirect-wr */ + /* Skip the following ops if all of the init modes don't match */ + OP_IF_MODE_OR, + /* Skip the following ops if any of the init modes don't match */ + OP_IF_MODE_AND, + OP_MAX +}; + +enum { + STAGE_START, + STAGE_END, +}; + +/* Returns the index of start or end of a specific block stage in ops array*/ +#define BLOCK_OPS_IDX(block, stage, end) \ + (2*(((block)*NUM_OF_INIT_PHASES) + (stage)) + (end)) + + +/* structs for the various opcodes */ +struct raw_op { + u32 op:8; + u32 offset:24; + u32 raw_data; +}; + +struct op_read { + u32 op:8; + u32 offset:24; + u32 val; +}; + +struct op_write { + u32 op:8; + u32 offset:24; + u32 val; +}; + +struct op_arr_write { + u32 op:8; + u32 offset:24; +#ifdef __BIG_ENDIAN + u16 data_len; + u16 data_off; +#else /* __LITTLE_ENDIAN */ + u16 data_off; + u16 data_len; +#endif +}; + +struct op_zero { + u32 op:8; + u32 offset:24; + u32 len; +}; + +struct op_if_mode { + u32 op:8; + u32 cmd_offset:24; + u32 mode_bit_map; +}; + + +union init_op { + struct op_read read; + struct op_write write; + struct op_arr_write arr_wr; + struct op_zero zero; + struct raw_op raw; + struct op_if_mode if_mode; +}; + + +/* Init Phases */ +enum { + PHASE_COMMON, + PHASE_PORT0, + PHASE_PORT1, + PHASE_PF0, + PHASE_PF1, + PHASE_PF2, + PHASE_PF3, + PHASE_PF4, + PHASE_PF5, + PHASE_PF6, + PHASE_PF7, + NUM_OF_INIT_PHASES +}; + +/* Init Modes */ +enum { + MODE_ASIC = 0x00000001, + MODE_FPGA = 0x00000002, + MODE_EMUL = 0x00000004, + MODE_E2 = 0x00000008, + MODE_E3 = 0x00000010, + MODE_PORT2 = 0x00000020, + MODE_PORT4 = 0x00000040, + MODE_SF = 0x00000080, + MODE_MF = 0x00000100, + MODE_MF_SD = 0x00000200, + MODE_MF_SI = 0x00000400, + MODE_MF_NIV = 0x00000800, + MODE_E3_A0 = 0x00001000, + MODE_E3_B0 = 0x00002000, + MODE_COS3 = 0x00004000, + MODE_COS6 = 0x00008000, + MODE_LITTLE_ENDIAN = 0x00010000, + MODE_BIG_ENDIAN = 0x00020000, +}; + +/* Init Blocks */ +enum { + BLOCK_ATC, + BLOCK_BRB1, + BLOCK_CCM, + BLOCK_CDU, + BLOCK_CFC, + BLOCK_CSDM, + BLOCK_CSEM, + BLOCK_DBG, + BLOCK_DMAE, + BLOCK_DORQ, + BLOCK_HC, + BLOCK_IGU, + BLOCK_MISC, + BLOCK_NIG, + BLOCK_PBF, + BLOCK_PGLUE_B, + BLOCK_PRS, + BLOCK_PXP2, + BLOCK_PXP, + BLOCK_QM, + BLOCK_SRC, + BLOCK_TCM, + BLOCK_TM, + BLOCK_TSDM, + BLOCK_TSEM, + BLOCK_UCM, + BLOCK_UPB, + BLOCK_USDM, + BLOCK_USEM, + BLOCK_XCM, + BLOCK_XPB, + BLOCK_XSDM, + BLOCK_XSEM, + BLOCK_MISC_AEU, + NUM_OF_INIT_BLOCKS +}; + +/* QM queue numbers */ +#define BNX2X_ETH_Q 0 +#define BNX2X_TOE_Q 3 +#define BNX2X_TOE_ACK_Q 6 +#define BNX2X_ISCSI_Q 9 +#define BNX2X_ISCSI_ACK_Q 11 +#define BNX2X_FCOE_Q 10 + +/* Vnics per mode */ +#define BNX2X_PORT2_MODE_NUM_VNICS 4 +#define BNX2X_PORT4_MODE_NUM_VNICS 2 + +/* COS offset for port1 in E3 B0 4port mode */ +#define BNX2X_E3B0_PORT1_COS_OFFSET 3 + +/* QM Register addresses */ +#define BNX2X_Q_VOQ_REG_ADDR(pf_q_num)\ + (QM_REG_QVOQIDX_0 + 4 * (pf_q_num)) +#define BNX2X_VOQ_Q_REG_ADDR(cos, pf_q_num)\ + (QM_REG_VOQQMASK_0_LSB + 4 * ((cos) * 2 + ((pf_q_num) >> 5))) +#define BNX2X_Q_CMDQ_REG_ADDR(pf_q_num)\ + (QM_REG_BYTECRDCMDQ_0 + 4 * ((pf_q_num) >> 4)) + +/* extracts the QM queue number for the specified port and vnic */ +#define BNX2X_PF_Q_NUM(q_num, port, vnic)\ + ((((port) << 1) | (vnic)) * 16 + (q_num)) + + +/* Maps the specified queue to the specified COS */ +static inline void bnx2x_map_q_cos(struct bnx2x *bp, u32 q_num, u32 new_cos) +{ + /* find current COS mapping */ + u32 curr_cos = REG_RD(bp, QM_REG_QVOQIDX_0 + q_num * 4); + + /* check if queue->COS mapping has changed */ + if (curr_cos != new_cos) { + u32 num_vnics = BNX2X_PORT2_MODE_NUM_VNICS; + u32 reg_addr, reg_bit_map, vnic; + + /* update parameters for 4port mode */ + if (INIT_MODE_FLAGS(bp) & MODE_PORT4) { + num_vnics = BNX2X_PORT4_MODE_NUM_VNICS; + if (BP_PORT(bp)) { + curr_cos += BNX2X_E3B0_PORT1_COS_OFFSET; + new_cos += BNX2X_E3B0_PORT1_COS_OFFSET; + } + } + + /* change queue mapping for each VNIC */ + for (vnic = 0; vnic < num_vnics; vnic++) { + u32 pf_q_num = + BNX2X_PF_Q_NUM(q_num, BP_PORT(bp), vnic); + u32 q_bit_map = 1 << (pf_q_num & 0x1f); + + /* overwrite queue->VOQ mapping */ + REG_WR(bp, BNX2X_Q_VOQ_REG_ADDR(pf_q_num), new_cos); + + /* clear queue bit from current COS bit map */ + reg_addr = BNX2X_VOQ_Q_REG_ADDR(curr_cos, pf_q_num); + reg_bit_map = REG_RD(bp, reg_addr); + REG_WR(bp, reg_addr, reg_bit_map & (~q_bit_map)); + + /* set queue bit in new COS bit map */ + reg_addr = BNX2X_VOQ_Q_REG_ADDR(new_cos, pf_q_num); + reg_bit_map = REG_RD(bp, reg_addr); + REG_WR(bp, reg_addr, reg_bit_map | q_bit_map); + + /* set/clear queue bit in command-queue bit map + (E2/E3A0 only, valid COS values are 0/1) */ + if (!(INIT_MODE_FLAGS(bp) & MODE_E3_B0)) { + reg_addr = BNX2X_Q_CMDQ_REG_ADDR(pf_q_num); + reg_bit_map = REG_RD(bp, reg_addr); + q_bit_map = 1 << (2 * (pf_q_num & 0xf)); + reg_bit_map = new_cos ? + (reg_bit_map | q_bit_map) : + (reg_bit_map & (~q_bit_map)); + REG_WR(bp, reg_addr, reg_bit_map); + } + } + } +} + +/* Configures the QM according to the specified per-traffic-type COSes */ +static inline void bnx2x_dcb_config_qm(struct bnx2x *bp, enum cos_mode mode, + struct priority_cos *traffic_cos) +{ + bnx2x_map_q_cos(bp, BNX2X_FCOE_Q, + traffic_cos[LLFC_TRAFFIC_TYPE_FCOE].cos); + bnx2x_map_q_cos(bp, BNX2X_ISCSI_Q, + traffic_cos[LLFC_TRAFFIC_TYPE_ISCSI].cos); + bnx2x_map_q_cos(bp, BNX2X_ISCSI_ACK_Q, + traffic_cos[LLFC_TRAFFIC_TYPE_ISCSI].cos); + if (mode != STATIC_COS) { + /* required only in backward compatible COS mode */ + bnx2x_map_q_cos(bp, BNX2X_ETH_Q, + traffic_cos[LLFC_TRAFFIC_TYPE_NW].cos); + bnx2x_map_q_cos(bp, BNX2X_TOE_Q, + traffic_cos[LLFC_TRAFFIC_TYPE_NW].cos); + bnx2x_map_q_cos(bp, BNX2X_TOE_ACK_Q, + traffic_cos[LLFC_TRAFFIC_TYPE_NW].cos); + } +} + + +/* Returns the index of start or end of a specific block stage in ops array*/ +#define BLOCK_OPS_IDX(block, stage, end) \ + (2*(((block)*NUM_OF_INIT_PHASES) + (stage)) + (end)) + + +#define INITOP_SET 0 /* set the HW directly */ +#define INITOP_CLEAR 1 /* clear the HW directly */ +#define INITOP_INIT 2 /* set the init-value array */ + +/**************************************************************************** +* ILT management +****************************************************************************/ +struct ilt_line { + dma_addr_t page_mapping; + void *page; + u32 size; +}; + +struct ilt_client_info { + u32 page_size; + u16 start; + u16 end; + u16 client_num; + u16 flags; +#define ILT_CLIENT_SKIP_INIT 0x1 +#define ILT_CLIENT_SKIP_MEM 0x2 +}; + +struct bnx2x_ilt { + u32 start_line; + struct ilt_line *lines; + struct ilt_client_info clients[4]; +#define ILT_CLIENT_CDU 0 +#define ILT_CLIENT_QM 1 +#define ILT_CLIENT_SRC 2 +#define ILT_CLIENT_TM 3 +}; + +/**************************************************************************** +* SRC configuration +****************************************************************************/ +struct src_ent { + u8 opaque[56]; + u64 next; +}; + +/**************************************************************************** +* Parity configuration +****************************************************************************/ +#define BLOCK_PRTY_INFO(block, en_mask, m1, m1h, m2, m3) \ +{ \ + block##_REG_##block##_PRTY_MASK, \ + block##_REG_##block##_PRTY_STS_CLR, \ + en_mask, {m1, m1h, m2, m3}, #block \ +} + +#define BLOCK_PRTY_INFO_0(block, en_mask, m1, m1h, m2, m3) \ +{ \ + block##_REG_##block##_PRTY_MASK_0, \ + block##_REG_##block##_PRTY_STS_CLR_0, \ + en_mask, {m1, m1h, m2, m3}, #block"_0" \ +} + +#define BLOCK_PRTY_INFO_1(block, en_mask, m1, m1h, m2, m3) \ +{ \ + block##_REG_##block##_PRTY_MASK_1, \ + block##_REG_##block##_PRTY_STS_CLR_1, \ + en_mask, {m1, m1h, m2, m3}, #block"_1" \ +} + +static const struct { + u32 mask_addr; + u32 sts_clr_addr; + u32 en_mask; /* Mask to enable parity attentions */ + struct { + u32 e1; /* 57710 */ + u32 e1h; /* 57711 */ + u32 e2; /* 57712 */ + u32 e3; /* 578xx */ + } reg_mask; /* Register mask (all valid bits) */ + char name[7]; /* Block's longest name is 6 characters long + * (name + suffix) + */ +} bnx2x_blocks_parity_data[] = { + /* bit 19 masked */ + /* REG_WR(bp, PXP_REG_PXP_PRTY_MASK, 0x80000); */ + /* bit 5,18,20-31 */ + /* REG_WR(bp, PXP2_REG_PXP2_PRTY_MASK_0, 0xfff40020); */ + /* bit 5 */ + /* REG_WR(bp, PXP2_REG_PXP2_PRTY_MASK_1, 0x20); */ + /* REG_WR(bp, HC_REG_HC_PRTY_MASK, 0x0); */ + /* REG_WR(bp, MISC_REG_MISC_PRTY_MASK, 0x0); */ + + /* Block IGU, MISC, PXP and PXP2 parity errors as long as we don't + * want to handle "system kill" flow at the moment. + */ + BLOCK_PRTY_INFO(PXP, 0x7ffffff, 0x3ffffff, 0x3ffffff, 0x7ffffff, + 0x7ffffff), + BLOCK_PRTY_INFO_0(PXP2, 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff), + BLOCK_PRTY_INFO_1(PXP2, 0x1ffffff, 0x7f, 0x7f, 0x7ff, 0x1ffffff), + BLOCK_PRTY_INFO(HC, 0x7, 0x7, 0x7, 0, 0), + BLOCK_PRTY_INFO(NIG, 0xffffffff, 0x3fffffff, 0xffffffff, 0, 0), + BLOCK_PRTY_INFO_0(NIG, 0xffffffff, 0, 0, 0xffffffff, 0xffffffff), + BLOCK_PRTY_INFO_1(NIG, 0xffff, 0, 0, 0xff, 0xffff), + BLOCK_PRTY_INFO(IGU, 0x7ff, 0, 0, 0x7ff, 0x7ff), + BLOCK_PRTY_INFO(MISC, 0x1, 0x1, 0x1, 0x1, 0x1), + BLOCK_PRTY_INFO(QM, 0, 0x1ff, 0xfff, 0xfff, 0xfff), + BLOCK_PRTY_INFO(ATC, 0x1f, 0, 0, 0x1f, 0x1f), + BLOCK_PRTY_INFO(PGLUE_B, 0x3, 0, 0, 0x3, 0x3), + BLOCK_PRTY_INFO(DORQ, 0, 0x3, 0x3, 0x3, 0x3), + {GRCBASE_UPB + PB_REG_PB_PRTY_MASK, + GRCBASE_UPB + PB_REG_PB_PRTY_STS_CLR, 0xf, + {0xf, 0xf, 0xf, 0xf}, "UPB"}, + {GRCBASE_XPB + PB_REG_PB_PRTY_MASK, + GRCBASE_XPB + PB_REG_PB_PRTY_STS_CLR, 0, + {0xf, 0xf, 0xf, 0xf}, "XPB"}, + BLOCK_PRTY_INFO(SRC, 0x4, 0x7, 0x7, 0x7, 0x7), + BLOCK_PRTY_INFO(CDU, 0, 0x1f, 0x1f, 0x1f, 0x1f), + BLOCK_PRTY_INFO(CFC, 0, 0xf, 0xf, 0xf, 0x3f), + BLOCK_PRTY_INFO(DBG, 0, 0x1, 0x1, 0x1, 0x1), + BLOCK_PRTY_INFO(DMAE, 0, 0xf, 0xf, 0xf, 0xf), + BLOCK_PRTY_INFO(BRB1, 0, 0xf, 0xf, 0xf, 0xf), + BLOCK_PRTY_INFO(PRS, (1<<6), 0xff, 0xff, 0xff, 0xff), + BLOCK_PRTY_INFO(PBF, 0, 0, 0x3ffff, 0xfffff, 0xfffffff), + BLOCK_PRTY_INFO(TM, 0, 0, 0x7f, 0x7f, 0x7f), + BLOCK_PRTY_INFO(TSDM, 0x18, 0x7ff, 0x7ff, 0x7ff, 0x7ff), + BLOCK_PRTY_INFO(CSDM, 0x8, 0x7ff, 0x7ff, 0x7ff, 0x7ff), + BLOCK_PRTY_INFO(USDM, 0x38, 0x7ff, 0x7ff, 0x7ff, 0x7ff), + BLOCK_PRTY_INFO(XSDM, 0x8, 0x7ff, 0x7ff, 0x7ff, 0x7ff), + BLOCK_PRTY_INFO(TCM, 0, 0, 0x7ffffff, 0x7ffffff, 0x7ffffff), + BLOCK_PRTY_INFO(CCM, 0, 0, 0x7ffffff, 0x7ffffff, 0x7ffffff), + BLOCK_PRTY_INFO(UCM, 0, 0, 0x7ffffff, 0x7ffffff, 0x7ffffff), + BLOCK_PRTY_INFO(XCM, 0, 0, 0x3fffffff, 0x3fffffff, 0x3fffffff), + BLOCK_PRTY_INFO_0(TSEM, 0, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff), + BLOCK_PRTY_INFO_1(TSEM, 0, 0x3, 0x1f, 0x3f, 0x3f), + BLOCK_PRTY_INFO_0(USEM, 0, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff), + BLOCK_PRTY_INFO_1(USEM, 0, 0x3, 0x1f, 0x1f, 0x1f), + BLOCK_PRTY_INFO_0(CSEM, 0, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff), + BLOCK_PRTY_INFO_1(CSEM, 0, 0x3, 0x1f, 0x1f, 0x1f), + BLOCK_PRTY_INFO_0(XSEM, 0, 0xffffffff, 0xffffffff, 0xffffffff, + 0xffffffff), + BLOCK_PRTY_INFO_1(XSEM, 0, 0x3, 0x1f, 0x3f, 0x3f), +}; + + +/* [28] MCP Latched rom_parity + * [29] MCP Latched ump_rx_parity + * [30] MCP Latched ump_tx_parity + * [31] MCP Latched scpad_parity + */ +#define MISC_AEU_ENABLE_MCP_PRTY_BITS \ + (AEU_INPUTS_ATTN_BITS_MCP_LATCHED_ROM_PARITY | \ + AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_RX_PARITY | \ + AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_TX_PARITY | \ + AEU_INPUTS_ATTN_BITS_MCP_LATCHED_SCPAD_PARITY) + +/* Below registers control the MCP parity attention output. When + * MISC_AEU_ENABLE_MCP_PRTY_BITS are set - attentions are + * enabled, when cleared - disabled. + */ +static const u32 mcp_attn_ctl_regs[] = { + MISC_REG_AEU_ENABLE4_FUNC_0_OUT_0, + MISC_REG_AEU_ENABLE4_NIG_0, + MISC_REG_AEU_ENABLE4_PXP_0, + MISC_REG_AEU_ENABLE4_FUNC_1_OUT_0, + MISC_REG_AEU_ENABLE4_NIG_1, + MISC_REG_AEU_ENABLE4_PXP_1 +}; + +static inline void bnx2x_set_mcp_parity(struct bnx2x *bp, u8 enable) +{ + int i; + u32 reg_val; + + for (i = 0; i < ARRAY_SIZE(mcp_attn_ctl_regs); i++) { + reg_val = REG_RD(bp, mcp_attn_ctl_regs[i]); + + if (enable) + reg_val |= MISC_AEU_ENABLE_MCP_PRTY_BITS; + else + reg_val &= ~MISC_AEU_ENABLE_MCP_PRTY_BITS; + + REG_WR(bp, mcp_attn_ctl_regs[i], reg_val); + } +} + +static inline u32 bnx2x_parity_reg_mask(struct bnx2x *bp, int idx) +{ + if (CHIP_IS_E1(bp)) + return bnx2x_blocks_parity_data[idx].reg_mask.e1; + else if (CHIP_IS_E1H(bp)) + return bnx2x_blocks_parity_data[idx].reg_mask.e1h; + else if (CHIP_IS_E2(bp)) + return bnx2x_blocks_parity_data[idx].reg_mask.e2; + else /* CHIP_IS_E3 */ + return bnx2x_blocks_parity_data[idx].reg_mask.e3; +} + +static inline void bnx2x_disable_blocks_parity(struct bnx2x *bp) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(bnx2x_blocks_parity_data); i++) { + u32 dis_mask = bnx2x_parity_reg_mask(bp, i); + + if (dis_mask) { + REG_WR(bp, bnx2x_blocks_parity_data[i].mask_addr, + dis_mask); + DP(NETIF_MSG_HW, "Setting parity mask " + "for %s to\t\t0x%x\n", + bnx2x_blocks_parity_data[i].name, dis_mask); + } + } + + /* Disable MCP parity attentions */ + bnx2x_set_mcp_parity(bp, false); +} + +/** + * Clear the parity error status registers. + */ +static inline void bnx2x_clear_blocks_parity(struct bnx2x *bp) +{ + int i; + u32 reg_val, mcp_aeu_bits = + AEU_INPUTS_ATTN_BITS_MCP_LATCHED_ROM_PARITY | + AEU_INPUTS_ATTN_BITS_MCP_LATCHED_SCPAD_PARITY | + AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_RX_PARITY | + AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_TX_PARITY; + + /* Clear SEM_FAST parities */ + REG_WR(bp, XSEM_REG_FAST_MEMORY + SEM_FAST_REG_PARITY_RST, 0x1); + REG_WR(bp, TSEM_REG_FAST_MEMORY + SEM_FAST_REG_PARITY_RST, 0x1); + REG_WR(bp, USEM_REG_FAST_MEMORY + SEM_FAST_REG_PARITY_RST, 0x1); + REG_WR(bp, CSEM_REG_FAST_MEMORY + SEM_FAST_REG_PARITY_RST, 0x1); + + for (i = 0; i < ARRAY_SIZE(bnx2x_blocks_parity_data); i++) { + u32 reg_mask = bnx2x_parity_reg_mask(bp, i); + + if (reg_mask) { + reg_val = REG_RD(bp, bnx2x_blocks_parity_data[i]. + sts_clr_addr); + if (reg_val & reg_mask) + DP(NETIF_MSG_HW, + "Parity errors in %s: 0x%x\n", + bnx2x_blocks_parity_data[i].name, + reg_val & reg_mask); + } + } + + /* Check if there were parity attentions in MCP */ + reg_val = REG_RD(bp, MISC_REG_AEU_AFTER_INVERT_4_MCP); + if (reg_val & mcp_aeu_bits) + DP(NETIF_MSG_HW, "Parity error in MCP: 0x%x\n", + reg_val & mcp_aeu_bits); + + /* Clear parity attentions in MCP: + * [7] clears Latched rom_parity + * [8] clears Latched ump_rx_parity + * [9] clears Latched ump_tx_parity + * [10] clears Latched scpad_parity (both ports) + */ + REG_WR(bp, MISC_REG_AEU_CLR_LATCH_SIGNAL, 0x780); +} + +static inline void bnx2x_enable_blocks_parity(struct bnx2x *bp) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(bnx2x_blocks_parity_data); i++) { + u32 reg_mask = bnx2x_parity_reg_mask(bp, i); + + if (reg_mask) + REG_WR(bp, bnx2x_blocks_parity_data[i].mask_addr, + bnx2x_blocks_parity_data[i].en_mask & reg_mask); + } + + /* Enable MCP parity attentions */ + bnx2x_set_mcp_parity(bp, true); +} + + +#endif /* BNX2X_INIT_H */ + |
