summaryrefslogtreecommitdiffstats
path: root/drivers/net/dsa/b53/b53_common.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/dsa/b53/b53_common.c')
-rw-r--r--drivers/net/dsa/b53/b53_common.c37
1 files changed, 35 insertions, 2 deletions
diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c
index 8cf4801994e8..fa0eece21eef 100644
--- a/drivers/net/dsa/b53/b53_common.c
+++ b/drivers/net/dsa/b53/b53_common.c
@@ -326,6 +326,7 @@ static void b53_get_vlan_entry(struct b53_device *dev, u16 vid,
static void b53_set_forwarding(struct b53_device *dev, int enable)
{
+ struct dsa_switch *ds = dev->ds;
u8 mgmt;
b53_read8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, &mgmt);
@@ -336,6 +337,15 @@ static void b53_set_forwarding(struct b53_device *dev, int enable)
mgmt &= ~SM_SW_FWD_EN;
b53_write8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, mgmt);
+
+ /* Include IMP port in dumb forwarding mode when no tagging protocol is
+ * set
+ */
+ if (ds->ops->get_tag_protocol(ds) == DSA_TAG_PROTO_NONE) {
+ b53_read8(dev, B53_CTRL_PAGE, B53_SWITCH_CTRL, &mgmt);
+ mgmt |= B53_MII_DUMB_FWDG_EN;
+ b53_write8(dev, B53_CTRL_PAGE, B53_SWITCH_CTRL, mgmt);
+ }
}
static void b53_enable_vlan(struct b53_device *dev, bool enable)
@@ -598,7 +608,8 @@ static void b53_switch_reset_gpio(struct b53_device *dev)
static int b53_switch_reset(struct b53_device *dev)
{
- u8 mgmt;
+ unsigned int timeout = 1000;
+ u8 mgmt, reg;
b53_switch_reset_gpio(dev);
@@ -607,6 +618,28 @@ static int b53_switch_reset(struct b53_device *dev)
b53_write8(dev, B53_CTRL_PAGE, B53_SOFTRESET, 0x00);
}
+ /* This is specific to 58xx devices here, do not use is58xx() which
+ * covers the larger Starfigther 2 family, including 7445/7278 which
+ * still use this driver as a library and need to perform the reset
+ * earlier.
+ */
+ if (dev->chip_id == BCM58XX_DEVICE_ID) {
+ b53_read8(dev, B53_CTRL_PAGE, B53_SOFTRESET, &reg);
+ reg |= SW_RST | EN_SW_RST | EN_CH_RST;
+ b53_write8(dev, B53_CTRL_PAGE, B53_SOFTRESET, reg);
+
+ do {
+ b53_read8(dev, B53_CTRL_PAGE, B53_SOFTRESET, &reg);
+ if (!(reg & SW_RST))
+ break;
+
+ usleep_range(1000, 2000);
+ } while (timeout-- > 0);
+
+ if (timeout == 0)
+ return -ETIMEDOUT;
+ }
+
b53_read8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, &mgmt);
if (!(mgmt & SM_SW_FWD_EN)) {
@@ -1731,7 +1764,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
.vlans = 4096,
.enabled_ports = 0x1ff,
.arl_entries = 4,
- .cpu_port = B53_CPU_PORT_25,
+ .cpu_port = B53_CPU_PORT,
.vta_regs = B53_VTA_REGS,
.duplex_reg = B53_DUPLEX_STAT_GE,
.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
OpenPOWER on IntegriCloud