summaryrefslogtreecommitdiffstats
path: root/drivers/misc/mei/hw-txe.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/misc/mei/hw-txe.c')
-rw-r--r--drivers/misc/mei/hw-txe.c1107
1 files changed, 1107 insertions, 0 deletions
diff --git a/drivers/misc/mei/hw-txe.c b/drivers/misc/mei/hw-txe.c
new file mode 100644
index 000000000000..f60182a52f96
--- /dev/null
+++ b/drivers/misc/mei/hw-txe.c
@@ -0,0 +1,1107 @@
+/*
+ *
+ * Intel Management Engine Interface (Intel MEI) Linux driver
+ * Copyright (c) 2013-2014, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ */
+
+#include <linux/pci.h>
+#include <linux/jiffies.h>
+#include <linux/delay.h>
+#include <linux/kthread.h>
+#include <linux/irqreturn.h>
+
+#include <linux/mei.h>
+
+#include "mei_dev.h"
+#include "hw-txe.h"
+#include "client.h"
+#include "hbm.h"
+
+/**
+ * mei_txe_reg_read - Reads 32bit data from the device
+ *
+ * @base_addr: registers base address
+ * @offset: register offset
+ *
+ */
+static inline u32 mei_txe_reg_read(void __iomem *base_addr,
+ unsigned long offset)
+{
+ return ioread32(base_addr + offset);
+}
+
+/**
+ * mei_txe_reg_write - Writes 32bit data to the device
+ *
+ * @base_addr: registers base address
+ * @offset: register offset
+ * @value: the value to write
+ */
+static inline void mei_txe_reg_write(void __iomem *base_addr,
+ unsigned long offset, u32 value)
+{
+ iowrite32(value, base_addr + offset);
+}
+
+/**
+ * mei_txe_sec_reg_read_silent - Reads 32bit data from the SeC BAR
+ *
+ * @dev: the device structure
+ * @offset: register offset
+ *
+ * Doesn't check for aliveness while Reads 32bit data from the SeC BAR
+ */
+static inline u32 mei_txe_sec_reg_read_silent(struct mei_txe_hw *hw,
+ unsigned long offset)
+{
+ return mei_txe_reg_read(hw->mem_addr[SEC_BAR], offset);
+}
+
+/**
+ * mei_txe_sec_reg_read - Reads 32bit data from the SeC BAR
+ *
+ * @dev: the device structure
+ * @offset: register offset
+ *
+ * Reads 32bit data from the SeC BAR and shout loud if aliveness is not set
+ */
+static inline u32 mei_txe_sec_reg_read(struct mei_txe_hw *hw,
+ unsigned long offset)
+{
+ WARN(!hw->aliveness, "sec read: aliveness not asserted\n");
+ return mei_txe_sec_reg_read_silent(hw, offset);
+}
+/**
+ * mei_txe_sec_reg_write_silent - Writes 32bit data to the SeC BAR
+ * doesn't check for aliveness
+ *
+ * @dev: the device structure
+ * @offset: register offset
+ * @value: value to write
+ *
+ * Doesn't check for aliveness while writes 32bit data from to the SeC BAR
+ */
+static inline void mei_txe_sec_reg_write_silent(struct mei_txe_hw *hw,
+ unsigned long offset, u32 value)
+{
+ mei_txe_reg_write(hw->mem_addr[SEC_BAR], offset, value);
+}
+
+/**
+ * mei_txe_sec_reg_write - Writes 32bit data to the SeC BAR
+ *
+ * @dev: the device structure
+ * @offset: register offset
+ * @value: value to write
+ *
+ * Writes 32bit data from the SeC BAR and shout loud if aliveness is not set
+ */
+static inline void mei_txe_sec_reg_write(struct mei_txe_hw *hw,
+ unsigned long offset, u32 value)
+{
+ WARN(!hw->aliveness, "sec write: aliveness not asserted\n");
+ mei_txe_sec_reg_write_silent(hw, offset, value);
+}
+/**
+ * mei_txe_br_reg_read - Reads 32bit data from the Bridge BAR
+ *
+ * @hw: the device structure
+ * @offset: offset from which to read the data
+ *
+ */
+static inline u32 mei_txe_br_reg_read(struct mei_txe_hw *hw,
+ unsigned long offset)
+{
+ return mei_txe_reg_read(hw->mem_addr[BRIDGE_BAR], offset);
+}
+
+/**
+ * mei_txe_br_reg_write - Writes 32bit data to the Bridge BAR
+ *
+ * @hw: the device structure
+ * @offset: offset from which to write the data
+ * @value: the byte to write
+ */
+static inline void mei_txe_br_reg_write(struct mei_txe_hw *hw,
+ unsigned long offset, u32 value)
+{
+ mei_txe_reg_write(hw->mem_addr[BRIDGE_BAR], offset, value);
+}
+
+/**
+ * mei_txe_aliveness_set - request for aliveness change
+ *
+ * @dev: the device structure
+ * @req: requested aliveness value
+ *
+ * Request for aliveness change and returns true if the change is
+ * really needed and false if aliveness is already
+ * in the requested state
+ * Requires device lock to be held
+ */
+static bool mei_txe_aliveness_set(struct mei_device *dev, u32 req)
+{
+
+ struct mei_txe_hw *hw = to_txe_hw(dev);
+ bool do_req = hw->aliveness != req;
+
+ dev_dbg(&dev->pdev->dev, "Aliveness current=%d request=%d\n",
+ hw->aliveness, req);
+ if (do_req) {
+ hw->recvd_aliveness = false;
+ mei_txe_br_reg_write(hw, SICR_HOST_ALIVENESS_REQ_REG, req);
+ }
+ return do_req;
+}
+
+
+/**
+ * mei_txe_aliveness_req_get - get aliveness requested register value
+ *
+ * @dev: the device structure
+ *
+ * Extract HICR_HOST_ALIVENESS_RESP_ACK bit from
+ * from HICR_HOST_ALIVENESS_REQ register value
+ */
+static u32 mei_txe_aliveness_req_get(struct mei_device *dev)
+{
+ struct mei_txe_hw *hw = to_txe_hw(dev);
+ u32 reg;
+ reg = mei_txe_br_reg_read(hw, SICR_HOST_ALIVENESS_REQ_REG);
+ return reg & SICR_HOST_ALIVENESS_REQ_REQUESTED;
+}
+
+/**
+ * mei_txe_aliveness_get - get aliveness response register value
+ * @dev: the device structure
+ *
+ * Extract HICR_HOST_ALIVENESS_RESP_ACK bit
+ * from HICR_HOST_ALIVENESS_RESP register value
+ */
+static u32 mei_txe_aliveness_get(struct mei_device *dev)
+{
+ struct mei_txe_hw *hw = to_txe_hw(dev);
+ u32 reg;
+ reg = mei_txe_br_reg_read(hw, HICR_HOST_ALIVENESS_RESP_REG);
+ return reg & HICR_HOST_ALIVENESS_RESP_ACK;
+}
+
+/**
+ * mei_txe_aliveness_poll - waits for aliveness to settle
+ *
+ * @dev: the device structure
+ * @expected: expected aliveness value
+ *
+ * Polls for HICR_HOST_ALIVENESS_RESP.ALIVENESS_RESP to be set
+ * returns > 0 if the expected value was received, -ETIME otherwise
+ */
+static int mei_txe_aliveness_poll(struct mei_device *dev, u32 expected)
+{
+ struct mei_txe_hw *hw = to_txe_hw(dev);
+ int t = 0;
+
+ do {
+ hw->aliveness = mei_txe_aliveness_get(dev);
+ if (hw->aliveness == expected) {
+ dev_dbg(&dev->pdev->dev,
+ "aliveness settled after %d msecs\n", t);
+ return t;
+ }
+ mutex_unlock(&dev->device_lock);
+ msleep(MSEC_PER_SEC / 5);
+ mutex_lock(&dev->device_lock);
+ t += MSEC_PER_SEC / 5;
+ } while (t < SEC_ALIVENESS_WAIT_TIMEOUT);
+
+ dev_err(&dev->pdev->dev, "aliveness timed out\n");
+ return -ETIME;
+}
+
+/**
+ * mei_txe_aliveness_wait - waits for aliveness to settle
+ *
+ * @dev: the device structure
+ * @expected: expected aliveness value
+ *
+ * Waits for HICR_HOST_ALIVENESS_RESP.ALIVENESS_RESP to be set
+ * returns returns 0 on success and < 0 otherwise
+ */
+static int mei_txe_aliveness_wait(struct mei_device *dev, u32 expected)
+{
+ struct mei_txe_hw *hw = to_txe_hw(dev);
+ const unsigned long timeout =
+ msecs_to_jiffies(SEC_ALIVENESS_WAIT_TIMEOUT);
+ long err;
+ int ret;
+
+ hw->aliveness = mei_txe_aliveness_get(dev);
+ if (hw->aliveness == expected)
+ return 0;
+
+ mutex_unlock(&dev->device_lock);
+ err = wait_event_timeout(hw->wait_aliveness,
+ hw->recvd_aliveness, timeout);
+ mutex_lock(&dev->device_lock);
+
+ hw->aliveness = mei_txe_aliveness_get(dev);
+ ret = hw->aliveness == expected ? 0 : -ETIME;
+
+ if (ret)
+ dev_err(&dev->pdev->dev, "aliveness timed out");
+ else
+ dev_dbg(&dev->pdev->dev, "aliveness settled after %d msecs\n",
+ jiffies_to_msecs(timeout - err));
+ hw->recvd_aliveness = false;
+ return ret;
+}
+
+/**
+ * mei_txe_aliveness_set_sync - sets an wait for aliveness to complete
+ *
+ * @dev: the device structure
+ *
+ * returns returns 0 on success and < 0 otherwise
+ */
+int mei_txe_aliveness_set_sync(struct mei_device *dev, u32 req)
+{
+ if (mei_txe_aliveness_set(dev, req))
+ return mei_txe_aliveness_wait(dev, req);
+ return 0;
+}
+
+/**
+ * mei_txe_input_ready_interrupt_enable - sets the Input Ready Interrupt
+ *
+ * @dev: the device structure
+ */
+static void mei_txe_input_ready_interrupt_enable(struct mei_device *dev)
+{
+ struct mei_txe_hw *hw = to_txe_hw(dev);
+ u32 hintmsk;
+ /* Enable the SEC_IPC_HOST_INT_MASK_IN_RDY interrupt */
+ hintmsk = mei_txe_sec_reg_read(hw, SEC_IPC_HOST_INT_MASK_REG);
+ hintmsk |= SEC_IPC_HOST_INT_MASK_IN_RDY;
+ mei_txe_sec_reg_write(hw, SEC_IPC_HOST_INT_MASK_REG, hintmsk);
+}
+
+/**
+ * mei_txe_input_doorbell_set
+ * - Sets bit 0 in SEC_IPC_INPUT_DOORBELL.IPC_INPUT_DOORBELL.
+ * @dev: the device structure
+ */
+static void mei_txe_input_doorbell_set(struct mei_txe_hw *hw)
+{
+ /* Clear the interrupt cause */
+ clear_bit(TXE_INTR_IN_READY_BIT, &hw->intr_cause);
+ mei_txe_sec_reg_write(hw, SEC_IPC_INPUT_DOORBELL_REG, 1);
+}
+
+/**
+ * mei_txe_output_ready_set - Sets the SICR_SEC_IPC_OUTPUT_STATUS bit to 1
+ *
+ * @dev: the device structure
+ */
+static void mei_txe_output_ready_set(struct mei_txe_hw *hw)
+{
+ mei_txe_br_reg_write(hw,
+ SICR_SEC_IPC_OUTPUT_STATUS_REG,
+ SEC_IPC_OUTPUT_STATUS_RDY);
+}
+
+/**
+ * mei_txe_is_input_ready - check if TXE is ready for receiving data
+ *
+ * @dev: the device structure
+ */
+static bool mei_txe_is_input_ready(struct mei_device *dev)
+{
+ struct mei_txe_hw *hw = to_txe_hw(dev);
+ u32 status;
+ status = mei_txe_sec_reg_read(hw, SEC_IPC_INPUT_STATUS_REG);
+ return !!(SEC_IPC_INPUT_STATUS_RDY & status);
+}
+
+/**
+ * mei_txe_intr_clear - clear all interrupts
+ *
+ * @dev: the device structure
+ */
+static inline void mei_txe_intr_clear(struct mei_device *dev)
+{
+ struct mei_txe_hw *hw = to_txe_hw(dev);
+ mei_txe_sec_reg_write_silent(hw, SEC_IPC_HOST_INT_STATUS_REG,
+ SEC_IPC_HOST_INT_STATUS_PENDING);
+ mei_txe_br_reg_write(hw, HISR_REG, HISR_INT_STS_MSK);
+ mei_txe_br_reg_write(hw, HHISR_REG, IPC_HHIER_MSK);
+}
+
+/**
+ * mei_txe_intr_disable - disable all interrupts
+ *
+ * @dev: the device structure
+ */
+static void mei_txe_intr_disable(struct mei_device *dev)
+{
+ struct mei_txe_hw *hw = to_txe_hw(dev);
+ mei_txe_br_reg_write(hw, HHIER_REG, 0);
+ mei_txe_br_reg_write(hw, HIER_REG, 0);
+}
+/**
+ * mei_txe_intr_disable - enable all interrupts
+ *
+ * @dev: the device structure
+ */
+static void mei_txe_intr_enable(struct mei_device *dev)
+{
+ struct mei_txe_hw *hw = to_txe_hw(dev);
+ mei_txe_br_reg_write(hw, HHIER_REG, IPC_HHIER_MSK);
+ mei_txe_br_reg_write(hw, HIER_REG, HIER_INT_EN_MSK);
+}
+
+/**
+ * mei_txe_pending_interrupts - check if there are pending interrupts
+ * only Aliveness, Input ready, and output doorbell are of relevance
+ *
+ * @dev: the device structure
+ *
+ * Checks if there are pending interrupts
+ * only Aliveness, Readiness, Input ready, and Output doorbell are relevant
+ */
+static bool mei_txe_pending_interrupts(struct mei_device *dev)
+{
+
+ struct mei_txe_hw *hw = to_txe_hw(dev);
+ bool ret = (hw->intr_cause & (TXE_INTR_READINESS |
+ TXE_INTR_ALIVENESS |
+ TXE_INTR_IN_READY |
+ TXE_INTR_OUT_DB));
+
+ if (ret) {
+ dev_dbg(&dev->pdev->dev,
+ "Pending Interrupts InReady=%01d Readiness=%01d, Aliveness=%01d, OutDoor=%01d\n",
+ !!(hw->intr_cause & TXE_INTR_IN_READY),
+ !!(hw->intr_cause & TXE_INTR_READINESS),
+ !!(hw->intr_cause & TXE_INTR_ALIVENESS),
+ !!(hw->intr_cause & TXE_INTR_OUT_DB));
+ }
+ return ret;
+}
+
+/**
+ * mei_txe_input_payload_write - write a dword to the host buffer
+ * at offset idx
+ *
+ * @dev: the device structure
+ * @idx: index in the host buffer
+ * @value: value
+ */
+static void mei_txe_input_payload_write(struct mei_device *dev,
+ unsigned long idx, u32 value)
+{
+ struct mei_txe_hw *hw = to_txe_hw(dev);
+ mei_txe_sec_reg_write(hw, SEC_IPC_INPUT_PAYLOAD_REG +
+ (idx * sizeof(u32)), value);
+}
+
+/**
+ * mei_txe_out_data_read - read dword from the device buffer
+ * at offset idx
+ *
+ * @dev: the device structure
+ * @idx: index in the device buffer
+ *
+ * returns register value at index
+ */
+static u32 mei_txe_out_data_read(const struct mei_device *dev,
+ unsigned long idx)
+{
+ struct mei_txe_hw *hw = to_txe_hw(dev);
+ return mei_txe_br_reg_read(hw,
+ BRIDGE_IPC_OUTPUT_PAYLOAD_REG + (idx * sizeof(u32)));
+}
+
+/* Readiness */
+
+/**
+ * mei_txe_readiness_set_host_rdy
+ *
+ * @dev: the device structure
+ */
+static void mei_txe_readiness_set_host_rdy(struct mei_device *dev)
+{
+ struct mei_txe_hw *hw = to_txe_hw(dev);
+ mei_txe_br_reg_write(hw,
+ SICR_HOST_IPC_READINESS_REQ_REG,
+ SICR_HOST_IPC_READINESS_HOST_RDY);
+}
+
+/**
+ * mei_txe_readiness_clear
+ *
+ * @dev: the device structure
+ */
+static void mei_txe_readiness_clear(struct mei_device *dev)
+{
+ struct mei_txe_hw *hw = to_txe_hw(dev);
+ mei_txe_br_reg_write(hw, SICR_HOST_IPC_READINESS_REQ_REG,
+ SICR_HOST_IPC_READINESS_RDY_CLR);
+}
+/**
+ * mei_txe_readiness_get - Reads and returns
+ * the HICR_SEC_IPC_READINESS register value
+ *
+ * @dev: the device structure
+ */
+static u32 mei_txe_readiness_get(struct mei_device *dev)
+{
+ struct mei_txe_hw *hw = to_txe_hw(dev);
+ return mei_txe_br_reg_read(hw, HICR_SEC_IPC_READINESS_REG);
+}
+
+
+/**
+ * mei_txe_readiness_is_sec_rdy - check readiness
+ * for HICR_SEC_IPC_READINESS_SEC_RDY
+ *
+ * @readiness - cached readiness state
+ */
+static inline bool mei_txe_readiness_is_sec_rdy(u32 readiness)
+{
+ return !!(readiness & HICR_SEC_IPC_READINESS_SEC_RDY);
+}
+
+/**
+ * mei_txe_hw_is_ready - check if the hw is ready
+ *
+ * @dev: the device structure
+ */
+static bool mei_txe_hw_is_ready(struct mei_device *dev)
+{
+ u32 readiness = mei_txe_readiness_get(dev);
+ return mei_txe_readiness_is_sec_rdy(readiness);
+}
+
+/**
+ * mei_txe_host_is_ready - check if the host is ready
+ *
+ * @dev: the device structure
+ */
+static inline bool mei_txe_host_is_ready(struct mei_device *dev)
+{
+ struct mei_txe_hw *hw = to_txe_hw(dev);
+ u32 reg = mei_txe_br_reg_read(hw, HICR_SEC_IPC_READINESS_REG);
+ return !!(reg & HICR_SEC_IPC_READINESS_HOST_RDY);
+}
+
+/**
+ * mei_txe_readiness_wait - wait till readiness settles
+ *
+ * @dev: the device structure
+ *
+ * returns 0 on success and -ETIME on timeout
+ */
+static int mei_txe_readiness_wait(struct mei_device *dev)
+{
+ if (mei_txe_hw_is_ready(dev))
+ return 0;
+
+ mutex_unlock(&dev->device_lock);
+ wait_event_timeout(dev->wait_hw_ready, dev->recvd_hw_ready,
+ msecs_to_jiffies(SEC_RESET_WAIT_TIMEOUT));
+ mutex_lock(&dev->device_lock);
+ if (!dev->recvd_hw_ready) {
+ dev_err(&dev->pdev->dev, "wait for readiness failed\n");
+ return -ETIME;
+ }
+
+ dev->recvd_hw_ready = false;
+ return 0;
+}
+
+/**
+ * mei_txe_hw_config - configure hardware at the start of the devices
+ *
+ * @dev: the device structure
+ *
+ * Configure hardware at the start of the device should be done only
+ * once at the device probe time
+ */
+static void mei_txe_hw_config(struct mei_device *dev)
+{
+
+ struct mei_txe_hw *hw = to_txe_hw(dev);
+ /* Doesn't change in runtime */
+ dev->hbuf_depth = PAYLOAD_SIZE / 4;
+
+ hw->aliveness = mei_txe_aliveness_get(dev);
+ hw->readiness = mei_txe_readiness_get(dev);
+
+ dev_dbg(&dev->pdev->dev, "aliveness_resp = 0x%08x, readiness = 0x%08x.\n",
+ hw->aliveness, hw->readiness);
+}
+
+
+/**
+ * mei_txe_write - writes a message to device.
+ *
+ * @dev: the device structure
+ * @header: header of message
+ * @buf: message buffer will be written
+ * returns 1 if success, 0 - otherwise.
+ */
+
+static int mei_txe_write(struct mei_device *dev,
+ struct mei_msg_hdr *header, unsigned char *buf)
+{
+ struct mei_txe_hw *hw = to_txe_hw(dev);
+ unsigned long rem;
+ unsigned long length;
+ int slots = dev->hbuf_depth;
+ u32 *reg_buf = (u32 *)buf;
+ u32 dw_cnt;
+ int i;
+
+ if (WARN_ON(!header || !buf))
+ return -EINVAL;
+
+ length = header->length;
+
+ dev_dbg(&dev->pdev->dev, MEI_HDR_FMT, MEI_HDR_PRM(header));
+
+ dw_cnt = mei_data2slots(length);
+ if (dw_cnt > slots)
+ return -EMSGSIZE;
+
+ if (WARN(!hw->aliveness, "txe write: aliveness not asserted\n"))
+ return -EAGAIN;
+
+ /* Enable Input Ready Interrupt. */
+ mei_txe_input_ready_interrupt_enable(dev);
+
+ if (!mei_txe_is_input_ready(dev)) {
+ dev_err(&dev->pdev->dev, "Input is not ready");
+ return -EAGAIN;
+ }
+
+ mei_txe_input_payload_write(dev, 0, *((u32 *)header));
+
+ for (i = 0; i < length / 4; i++)
+ mei_txe_input_payload_write(dev, i + 1, reg_buf[i]);
+
+ rem = length & 0x3;
+ if (rem > 0) {
+ u32 reg = 0;
+ memcpy(&reg, &buf[length - rem], rem);
+ mei_txe_input_payload_write(dev, i + 1, reg);
+ }
+
+ /* after each write the whole buffer is consumed */
+ hw->slots = 0;
+
+ /* Set Input-Doorbell */
+ mei_txe_input_doorbell_set(hw);
+
+ return 0;
+}
+
+/**
+ * mei_txe_hbuf_max_len - mimics the me hbuf circular buffer
+ *
+ * @dev: the device structure
+ *
+ * returns the PAYLOAD_SIZE - 4
+ */
+static size_t mei_txe_hbuf_max_len(const struct mei_device *dev)
+{
+ return PAYLOAD_SIZE - sizeof(struct mei_msg_hdr);
+}
+
+/**
+ * mei_txe_hbuf_empty_slots - mimics the me hbuf circular buffer
+ *
+ * @dev: the device structure
+ *
+ * returns always hbuf_depth
+ */
+static int mei_txe_hbuf_empty_slots(struct mei_device *dev)
+{
+ struct mei_txe_hw *hw = to_txe_hw(dev);
+ return hw->slots;
+}
+
+/**
+ * mei_txe_count_full_read_slots - mimics the me device circular buffer
+ *
+ * @dev: the device structure
+ *
+ * returns always buffer size in dwords count
+ */
+static int mei_txe_count_full_read_slots(struct mei_device *dev)
+{
+ /* read buffers has static size */
+ return PAYLOAD_SIZE / 4;
+}
+
+/**
+ * mei_txe_read_hdr - read message header which is always in 4 first bytes
+ *
+ * @dev: the device structure
+ *
+ * returns mei message header
+ */
+
+static u32 mei_txe_read_hdr(const struct mei_device *dev)
+{
+ return mei_txe_out_data_read(dev, 0);
+}
+/**
+ * mei_txe_read - reads a message from the txe device.
+ *
+ * @dev: the device structure
+ * @buf: message buffer will be written
+ * @len: message size will be read
+ *
+ * returns -EINVAL on error wrong argument and 0 on success
+ */
+static int mei_txe_read(struct mei_device *dev,
+ unsigned char *buf, unsigned long len)
+{
+
+ struct mei_txe_hw *hw = to_txe_hw(dev);
+ u32 i;
+ u32 *reg_buf = (u32 *)buf;
+ u32 rem = len & 0x3;
+
+ if (WARN_ON(!buf || !len))
+ return -EINVAL;
+
+ dev_dbg(&dev->pdev->dev,
+ "buffer-length = %lu buf[0]0x%08X\n",
+ len, mei_txe_out_data_read(dev, 0));
+
+ for (i = 0; i < len / 4; i++) {
+ /* skip header: index starts from 1 */
+ u32 reg = mei_txe_out_data_read(dev, i + 1);
+ dev_dbg(&dev->pdev->dev, "buf[%d] = 0x%08X\n", i, reg);
+ *reg_buf++ = reg;
+ }
+
+ if (rem) {
+ u32 reg = mei_txe_out_data_read(dev, i + 1);
+ memcpy(reg_buf, &reg, rem);
+ }
+
+ mei_txe_output_ready_set(hw);
+ return 0;
+}
+
+/**
+ * mei_txe_hw_reset - resets host and fw.
+ *
+ * @dev: the device structure
+ * @intr_enable: if interrupt should be enabled after reset.
+ *
+ * returns 0 on success and < 0 in case of error
+ */
+static int mei_txe_hw_reset(struct mei_device *dev, bool intr_enable)
+{
+ struct mei_txe_hw *hw = to_txe_hw(dev);
+
+ u32 aliveness_req;
+ /*
+ * read input doorbell to ensure consistency between Bridge and SeC
+ * return value might be garbage return
+ */
+ (void)mei_txe_sec_reg_read_silent(hw, SEC_IPC_INPUT_DOORBELL_REG);
+
+ aliveness_req = mei_txe_aliveness_req_get(dev);
+ hw->aliveness = mei_txe_aliveness_get(dev);
+
+ /* Disable interrupts in this stage we will poll */
+ mei_txe_intr_disable(dev);
+
+ /*
+ * If Aliveness Request and Aliveness Response are not equal then
+ * wait for them to be equal
+ * Since we might have interrupts disabled - poll for it
+ */
+ if (aliveness_req != hw->aliveness)
+ if (mei_txe_aliveness_poll(dev, aliveness_req) < 0) {
+ dev_err(&dev->pdev->dev,
+ "wait for aliveness settle failed ... bailing out\n");
+ return -EIO;
+ }
+
+ /*
+ * If Aliveness Request and Aliveness Response are set then clear them
+ */
+ if (aliveness_req) {
+ mei_txe_aliveness_set(dev, 0);
+ if (mei_txe_aliveness_poll(dev, 0) < 0) {
+ dev_err(&dev->pdev->dev,
+ "wait for aliveness failed ... bailing out\n");
+ return -EIO;
+ }
+ }
+
+ /*
+ * Set rediness RDY_CLR bit
+ */
+ mei_txe_readiness_clear(dev);
+
+ return 0;
+}
+
+/**
+ * mei_txe_hw_start - start the hardware after reset
+ *
+ * @dev: the device structure
+ *
+ * returns 0 on success and < 0 in case of error
+ */
+static int mei_txe_hw_start(struct mei_device *dev)
+{
+ struct mei_txe_hw *hw = to_txe_hw(dev);
+ int ret;
+
+ u32 hisr;
+
+ /* bring back interrupts */
+ mei_txe_intr_enable(dev);
+
+ ret = mei_txe_readiness_wait(dev);
+ if (ret < 0) {
+ dev_err(&dev->pdev->dev, "wating for readiness failed\n");
+ return ret;
+ }
+
+ /*
+ * If HISR.INT2_STS interrupt status bit is set then clear it.
+ */
+ hisr = mei_txe_br_reg_read(hw, HISR_REG);
+ if (hisr & HISR_INT_2_STS)
+ mei_txe_br_reg_write(hw, HISR_REG, HISR_INT_2_STS);
+
+ /* Clear the interrupt cause of OutputDoorbell */
+ clear_bit(TXE_INTR_OUT_DB_BIT, &hw->intr_cause);
+
+ ret = mei_txe_aliveness_set_sync(dev, 1);
+ if (ret < 0) {
+ dev_err(&dev->pdev->dev, "wait for aliveness failed ... bailing out\n");
+ return ret;
+ }
+
+ /* enable input ready interrupts:
+ * SEC_IPC_HOST_INT_MASK.IPC_INPUT_READY_INT_MASK
+ */
+ mei_txe_input_ready_interrupt_enable(dev);
+
+
+ /* Set the SICR_SEC_IPC_OUTPUT_STATUS.IPC_OUTPUT_READY bit */
+ mei_txe_output_ready_set(hw);
+
+ /* Set bit SICR_HOST_IPC_READINESS.HOST_RDY
+ */
+ mei_txe_readiness_set_host_rdy(dev);
+
+ return 0;
+}
+
+/**
+ * mei_txe_check_and_ack_intrs - translate multi BAR interrupt into
+ * single bit mask and acknowledge the interrupts
+ *
+ * @dev: the device structure
+ * @do_ack: acknowledge interrupts
+ */
+static bool mei_txe_check_and_ack_intrs(struct mei_device *dev, bool do_ack)
+{
+ struct mei_txe_hw *hw = to_txe_hw(dev);
+ u32 hisr;
+ u32 hhisr;
+ u32 ipc_isr;
+ u32 aliveness;
+ bool generated;
+
+ /* read interrupt registers */
+ hhisr = mei_txe_br_reg_read(hw, HHISR_REG);
+ generated = (hhisr & IPC_HHIER_MSK);
+ if (!generated)
+ goto out;
+
+ hisr = mei_txe_br_reg_read(hw, HISR_REG);
+
+ aliveness = mei_txe_aliveness_get(dev);
+ if (hhisr & IPC_HHIER_SEC && aliveness)
+ ipc_isr = mei_txe_sec_reg_read_silent(hw,
+ SEC_IPC_HOST_INT_STATUS_REG);
+ else
+ ipc_isr = 0;
+
+ generated = generated ||
+ (hisr & HISR_INT_STS_MSK) ||
+ (ipc_isr & SEC_IPC_HOST_INT_STATUS_PENDING);
+
+ if (generated && do_ack) {
+ /* Save the interrupt causes */
+ hw->intr_cause |= hisr & HISR_INT_STS_MSK;
+ if (ipc_isr & SEC_IPC_HOST_INT_STATUS_IN_RDY)
+ hw->intr_cause |= TXE_INTR_IN_READY;
+
+
+ mei_txe_intr_disable(dev);
+ /* Clear the interrupts in hierarchy:
+ * IPC and Bridge, than the High Level */
+ mei_txe_sec_reg_write_silent(hw,
+ SEC_IPC_HOST_INT_STATUS_REG, ipc_isr);
+ mei_txe_br_reg_write(hw, HISR_REG, hisr);
+ mei_txe_br_reg_write(hw, HHISR_REG, hhisr);
+ }
+
+out:
+ return generated;
+}
+
+/**
+ * mei_txe_irq_quick_handler - The ISR of the MEI device
+ *
+ * @irq: The irq number
+ * @dev_id: pointer to the device structure
+ *
+ * returns irqreturn_t
+ */
+irqreturn_t mei_txe_irq_quick_handler(int irq, void *dev_id)
+{
+ struct mei_device *dev = dev_id;
+
+ if (mei_txe_check_and_ack_intrs(dev, true))
+ return IRQ_WAKE_THREAD;
+ return IRQ_NONE;
+}
+
+
+/**
+ * mei_txe_irq_thread_handler - txe interrupt thread
+ *
+ * @irq: The irq number
+ * @dev_id: pointer to the device structure
+ *
+ * returns irqreturn_t
+ *
+ */
+irqreturn_t mei_txe_irq_thread_handler(int irq, void *dev_id)
+{
+ struct mei_device *dev = (struct mei_device *) dev_id;
+ struct mei_txe_hw *hw = to_txe_hw(dev);
+ struct mei_cl_cb complete_list;
+ s32 slots;
+ int rets = 0;
+
+ dev_dbg(&dev->pdev->dev, "irq thread: Interrupt Registers HHISR|HISR|SEC=%02X|%04X|%02X\n",
+ mei_txe_br_reg_read(hw, HHISR_REG),
+ mei_txe_br_reg_read(hw, HISR_REG),
+ mei_txe_sec_reg_read_silent(hw, SEC_IPC_HOST_INT_STATUS_REG));
+
+
+ /* initialize our complete list */
+ mutex_lock(&dev->device_lock);
+ mei_io_list_init(&complete_list);
+
+ if (pci_dev_msi_enabled(dev->pdev))
+ mei_txe_check_and_ack_intrs(dev, true);
+
+ /* show irq events */
+ mei_txe_pending_interrupts(dev);
+
+ hw->aliveness = mei_txe_aliveness_get(dev);
+ hw->readiness = mei_txe_readiness_get(dev);
+
+ /* Readiness:
+ * Detection of TXE driver going through reset
+ * or TXE driver resetting the HECI interface.
+ */
+ if (test_and_clear_bit(TXE_INTR_READINESS_BIT, &hw->intr_cause)) {
+ dev_dbg(&dev->pdev->dev, "Readiness Interrupt was received...\n");
+
+ /* Check if SeC is going through reset */
+ if (mei_txe_readiness_is_sec_rdy(hw->readiness)) {
+ dev_dbg(&dev->pdev->dev, "we need to start the dev.\n");
+ dev->recvd_hw_ready = true;
+ } else {
+ dev->recvd_hw_ready = false;
+ if (dev->dev_state != MEI_DEV_RESETTING) {
+
+ dev_warn(&dev->pdev->dev, "FW not ready: resetting.\n");
+ schedule_work(&dev->reset_work);
+ goto end;
+
+ }
+ }
+ wake_up(&dev->wait_hw_ready);
+ }
+
+ /************************************************************/
+ /* Check interrupt cause:
+ * Aliveness: Detection of SeC acknowledge of host request that
+ * it remain alive or host cancellation of that request.
+ */
+
+ if (test_and_clear_bit(TXE_INTR_ALIVENESS_BIT, &hw->intr_cause)) {
+ /* Clear the interrupt cause */
+ dev_dbg(&dev->pdev->dev,
+ "Aliveness Interrupt: Status: %d\n", hw->aliveness);
+ hw->recvd_aliveness = true;
+ if (waitqueue_active(&hw->wait_aliveness))
+ wake_up(&hw->wait_aliveness);
+ }
+
+
+ /* Output Doorbell:
+ * Detection of SeC having sent output to host
+ */
+ slots = mei_count_full_read_slots(dev);
+ if (test_and_clear_bit(TXE_INTR_OUT_DB_BIT, &hw->intr_cause)) {
+ /* Read from TXE */
+ rets = mei_irq_read_handler(dev, &complete_list, &slots);
+ if (rets && dev->dev_state != MEI_DEV_RESETTING) {
+ dev_err(&dev->pdev->dev,
+ "mei_irq_read_handler ret = %d.\n", rets);
+
+ schedule_work(&dev->reset_work);
+ goto end;
+ }
+ }
+ /* Input Ready: Detection if host can write to SeC */
+ if (test_and_clear_bit(TXE_INTR_IN_READY_BIT, &hw->intr_cause)) {
+ dev->hbuf_is_ready = true;
+ hw->slots = dev->hbuf_depth;
+ }
+
+ if (hw->aliveness && dev->hbuf_is_ready) {
+ /* get the real register value */
+ dev->hbuf_is_ready = mei_hbuf_is_ready(dev);
+ rets = mei_irq_write_handler(dev, &complete_list);
+ if (rets && rets != -EMSGSIZE)
+ dev_err(&dev->pdev->dev, "mei_irq_write_handler ret = %d.\n",
+ rets);
+ dev->hbuf_is_ready = mei_hbuf_is_ready(dev);
+ }
+
+ mei_irq_compl_handler(dev, &complete_list);
+
+end:
+ dev_dbg(&dev->pdev->dev, "interrupt thread end ret = %d\n", rets);
+
+ mutex_unlock(&dev->device_lock);
+
+ mei_enable_interrupts(dev);
+ return IRQ_HANDLED;
+}
+
+static const struct mei_hw_ops mei_txe_hw_ops = {
+
+ .host_is_ready = mei_txe_host_is_ready,
+
+ .hw_is_ready = mei_txe_hw_is_ready,
+ .hw_reset = mei_txe_hw_reset,
+ .hw_config = mei_txe_hw_config,
+ .hw_start = mei_txe_hw_start,
+
+ .intr_clear = mei_txe_intr_clear,
+ .intr_enable = mei_txe_intr_enable,
+ .intr_disable = mei_txe_intr_disable,
+
+ .hbuf_free_slots = mei_txe_hbuf_empty_slots,
+ .hbuf_is_ready = mei_txe_is_input_ready,
+ .hbuf_max_len = mei_txe_hbuf_max_len,
+
+ .write = mei_txe_write,
+
+ .rdbuf_full_slots = mei_txe_count_full_read_slots,
+ .read_hdr = mei_txe_read_hdr,
+
+ .read = mei_txe_read,
+
+};
+
+/**
+ * mei_txe_dev_init - allocates and initializes txe hardware specific structure
+ *
+ * @pdev - pci device
+ * returns struct mei_device * on success or NULL;
+ *
+ */
+struct mei_device *mei_txe_dev_init(struct pci_dev *pdev)
+{
+ struct mei_device *dev;
+ struct mei_txe_hw *hw;
+
+ dev = kzalloc(sizeof(struct mei_device) +
+ sizeof(struct mei_txe_hw), GFP_KERNEL);
+ if (!dev)
+ return NULL;
+
+ mei_device_init(dev);
+
+ hw = to_txe_hw(dev);
+
+ init_waitqueue_head(&hw->wait_aliveness);
+
+ dev->ops = &mei_txe_hw_ops;
+
+ dev->pdev = pdev;
+ return dev;
+}
+
+/**
+ * mei_txe_setup_satt2 - SATT2 configuration for DMA support.
+ *
+ * @dev: the device structure
+ * @addr: physical address start of the range
+ * @range: physical range size
+ */
+int mei_txe_setup_satt2(struct mei_device *dev, phys_addr_t addr, u32 range)
+{
+ struct mei_txe_hw *hw = to_txe_hw(dev);
+
+ u32 lo32 = lower_32_bits(addr);
+ u32 hi32 = upper_32_bits(addr);
+ u32 ctrl;
+
+ /* SATT is limited to 36 Bits */
+ if (hi32 & ~0xF)
+ return -EINVAL;
+
+ /* SATT has to be 16Byte aligned */
+ if (lo32 & 0xF)
+ return -EINVAL;
+
+ /* SATT range has to be 4Bytes aligned */
+ if (range & 0x4)
+ return -EINVAL;
+
+ /* SATT is limited to 32 MB range*/
+ if (range > SATT_RANGE_MAX)
+ return -EINVAL;
+
+ ctrl = SATT2_CTRL_VALID_MSK;
+ ctrl |= hi32 << SATT2_CTRL_BR_BASE_ADDR_REG_SHIFT;
+
+ mei_txe_br_reg_write(hw, SATT2_SAP_SIZE_REG, range);
+ mei_txe_br_reg_write(hw, SATT2_BRG_BA_LSB_REG, lo32);
+ mei_txe_br_reg_write(hw, SATT2_CTRL_REG, ctrl);
+ dev_dbg(&dev->pdev->dev, "SATT2: SAP_SIZE_OFFSET=0x%08X, BRG_BA_LSB_OFFSET=0x%08X, CTRL_OFFSET=0x%08X\n",
+ range, lo32, ctrl);
+
+ return 0;
+}
OpenPOWER on IntegriCloud