diff options
Diffstat (limited to 'drivers/isdn/i4l/isdn_tty.c')
| -rw-r--r-- | drivers/isdn/i4l/isdn_tty.c | 3756 |
1 files changed, 0 insertions, 3756 deletions
diff --git a/drivers/isdn/i4l/isdn_tty.c b/drivers/isdn/i4l/isdn_tty.c deleted file mode 100644 index 43700fc19a31..000000000000 --- a/drivers/isdn/i4l/isdn_tty.c +++ /dev/null @@ -1,3756 +0,0 @@ -/* - * Linux ISDN subsystem, tty functions and AT-command emulator (linklevel). - * - * Copyright 1994-1999 by Fritz Elfert (fritz@isdn4linux.de) - * Copyright 1995,96 by Thinking Objects Software GmbH Wuerzburg - * - * This software may be used and distributed according to the terms - * of the GNU General Public License, incorporated herein by reference. - * - */ -#undef ISDN_TTY_STAT_DEBUG - -#include <linux/isdn.h> -#include <linux/serial.h> /* ASYNC_* flags */ -#include <linux/slab.h> -#include <linux/delay.h> -#include <linux/mutex.h> -#include <linux/sched/signal.h> -#include "isdn_common.h" -#include "isdn_tty.h" -#ifdef CONFIG_ISDN_AUDIO -#include "isdn_audio.h" -#define VBUF 0x3e0 -#define VBUFX (VBUF/16) -#endif - -#define FIX_FILE_TRANSFER -#define DUMMY_HAYES_AT - -/* Prototypes */ - -static DEFINE_MUTEX(modem_info_mutex); -static int isdn_tty_edit_at(const char *, int, modem_info *); -static void isdn_tty_check_esc(const u_char *, u_char, int, int *, u_long *); -static void isdn_tty_modem_reset_regs(modem_info *, int); -static void isdn_tty_cmd_ATA(modem_info *); -static void isdn_tty_flush_buffer(struct tty_struct *); -static void isdn_tty_modem_result(int, modem_info *); -#ifdef CONFIG_ISDN_AUDIO -static int isdn_tty_countDLE(unsigned char *, int); -#endif - -/* Leave this unchanged unless you know what you do! */ -#define MODEM_PARANOIA_CHECK -#define MODEM_DO_RESTART - -static int bit2si[8] = -{1, 5, 7, 7, 7, 7, 7, 7}; -static int si2bit[8] = -{4, 1, 4, 4, 4, 4, 4, 4}; - -/* isdn_tty_try_read() is called from within isdn_tty_rcv_skb() - * to stuff incoming data directly into a tty's flip-buffer. This - * is done to speed up tty-receiving if the receive-queue is empty. - * This routine MUST be called with interrupts off. - * Return: - * 1 = Success - * 0 = Failure, data has to be buffered and later processed by - * isdn_tty_readmodem(). - */ -static int -isdn_tty_try_read(modem_info *info, struct sk_buff *skb) -{ - struct tty_port *port = &info->port; - int c; - int len; - char last; - - if (!info->online) - return 0; - - if (!(info->mcr & UART_MCR_RTS)) - return 0; - - len = skb->len -#ifdef CONFIG_ISDN_AUDIO - + ISDN_AUDIO_SKB_DLECOUNT(skb) -#endif - ; - - c = tty_buffer_request_room(port, len); - if (c < len) - return 0; - -#ifdef CONFIG_ISDN_AUDIO - if (ISDN_AUDIO_SKB_DLECOUNT(skb)) { - int l = skb->len; - unsigned char *dp = skb->data; - while (--l) { - if (*dp == DLE) - tty_insert_flip_char(port, DLE, 0); - tty_insert_flip_char(port, *dp++, 0); - } - if (*dp == DLE) - tty_insert_flip_char(port, DLE, 0); - last = *dp; - } else { -#endif - if (len > 1) - tty_insert_flip_string(port, skb->data, len - 1); - last = skb->data[len - 1]; -#ifdef CONFIG_ISDN_AUDIO - } -#endif - if (info->emu.mdmreg[REG_CPPP] & BIT_CPPP) - tty_insert_flip_char(port, last, 0xFF); - else - tty_insert_flip_char(port, last, TTY_NORMAL); - tty_flip_buffer_push(port); - kfree_skb(skb); - - return 1; -} - -/* isdn_tty_readmodem() is called periodically from within timer-interrupt. - * It tries getting received data from the receive queue an stuff it into - * the tty's flip-buffer. - */ -void -isdn_tty_readmodem(void) -{ - int resched = 0; - int midx; - int i; - int r; - modem_info *info; - - for (i = 0; i < ISDN_MAX_CHANNELS; i++) { - midx = dev->m_idx[i]; - if (midx < 0) - continue; - - info = &dev->mdm.info[midx]; - if (!info->online) - continue; - - r = 0; -#ifdef CONFIG_ISDN_AUDIO - isdn_audio_eval_dtmf(info); - if ((info->vonline & 1) && (info->emu.vpar[1])) - isdn_audio_eval_silence(info); -#endif - if (info->mcr & UART_MCR_RTS) { - /* CISCO AsyncPPP Hack */ - if (!(info->emu.mdmreg[REG_CPPP] & BIT_CPPP)) - r = isdn_readbchan_tty(info->isdn_driver, - info->isdn_channel, - &info->port, 0); - else - r = isdn_readbchan_tty(info->isdn_driver, - info->isdn_channel, - &info->port, 1); - if (r) - tty_flip_buffer_push(&info->port); - } else - r = 1; - - if (r) { - info->rcvsched = 0; - resched = 1; - } else - info->rcvsched = 1; - } - if (!resched) - isdn_timer_ctrl(ISDN_TIMER_MODEMREAD, 0); -} - -int -isdn_tty_rcv_skb(int i, int di, int channel, struct sk_buff *skb) -{ - ulong flags; - int midx; -#ifdef CONFIG_ISDN_AUDIO - int ifmt; -#endif - modem_info *info; - - if ((midx = dev->m_idx[i]) < 0) { - /* if midx is invalid, packet is not for tty */ - return 0; - } - info = &dev->mdm.info[midx]; -#ifdef CONFIG_ISDN_AUDIO - ifmt = 1; - - if ((info->vonline) && (!info->emu.vpar[4])) - isdn_audio_calc_dtmf(info, skb->data, skb->len, ifmt); - if ((info->vonline & 1) && (info->emu.vpar[1])) - isdn_audio_calc_silence(info, skb->data, skb->len, ifmt); -#endif - if ((info->online < 2) -#ifdef CONFIG_ISDN_AUDIO - && (!(info->vonline & 1)) -#endif - ) { - /* If Modem not listening, drop data */ - kfree_skb(skb); - return 1; - } - if (info->emu.mdmreg[REG_T70] & BIT_T70) { - if (info->emu.mdmreg[REG_T70] & BIT_T70_EXT) { - /* T.70 decoding: throw away the T.70 header (2 or 4 bytes) */ - if (skb->data[0] == 3) /* pure data packet -> 4 byte headers */ - skb_pull(skb, 4); - else - if (skb->data[0] == 1) /* keepalive packet -> 2 byte hdr */ - skb_pull(skb, 2); - } else - /* T.70 decoding: Simply throw away the T.70 header (4 bytes) */ - if ((skb->data[0] == 1) && ((skb->data[1] == 0) || (skb->data[1] == 1))) - skb_pull(skb, 4); - } -#ifdef CONFIG_ISDN_AUDIO - ISDN_AUDIO_SKB_DLECOUNT(skb) = 0; - ISDN_AUDIO_SKB_LOCK(skb) = 0; - if (info->vonline & 1) { - /* voice conversion/compression */ - switch (info->emu.vpar[3]) { - case 2: - case 3: - case 4: - /* adpcm - * Since compressed data takes less - * space, we can overwrite the buffer. - */ - skb_trim(skb, isdn_audio_xlaw2adpcm(info->adpcmr, - ifmt, - skb->data, - skb->data, - skb->len)); - break; - case 5: - /* a-law */ - if (!ifmt) - isdn_audio_ulaw2alaw(skb->data, skb->len); - break; - case 6: - /* u-law */ - if (ifmt) - isdn_audio_alaw2ulaw(skb->data, skb->len); - break; - } - ISDN_AUDIO_SKB_DLECOUNT(skb) = - isdn_tty_countDLE(skb->data, skb->len); - } -#ifdef CONFIG_ISDN_TTY_FAX - else { - if (info->faxonline & 2) { - isdn_tty_fax_bitorder(info, skb); - ISDN_AUDIO_SKB_DLECOUNT(skb) = - isdn_tty_countDLE(skb->data, skb->len); - } - } -#endif -#endif - /* Try to deliver directly via tty-buf if queue is empty */ - spin_lock_irqsave(&info->readlock, flags); - if (skb_queue_empty(&dev->drv[di]->rpqueue[channel])) - if (isdn_tty_try_read(info, skb)) { - spin_unlock_irqrestore(&info->readlock, flags); - return 1; - } - /* Direct deliver failed or queue wasn't empty. - * Queue up for later dequeueing via timer-irq. - */ - __skb_queue_tail(&dev->drv[di]->rpqueue[channel], skb); - dev->drv[di]->rcvcount[channel] += - (skb->len -#ifdef CONFIG_ISDN_AUDIO - + ISDN_AUDIO_SKB_DLECOUNT(skb) -#endif - ); - spin_unlock_irqrestore(&info->readlock, flags); - /* Schedule dequeuing */ - if ((dev->modempoll) && (info->rcvsched)) - isdn_timer_ctrl(ISDN_TIMER_MODEMREAD, 1); - return 1; -} - -static void -isdn_tty_cleanup_xmit(modem_info *info) -{ - skb_queue_purge(&info->xmit_queue); -#ifdef CONFIG_ISDN_AUDIO - skb_queue_purge(&info->dtmf_queue); -#endif -} - -static void -isdn_tty_tint(modem_info *info) -{ - struct sk_buff *skb = skb_dequeue(&info->xmit_queue); - int len, slen; - - if (!skb) - return; - len = skb->len; - if ((slen = isdn_writebuf_skb_stub(info->isdn_driver, - info->isdn_channel, 1, skb)) == len) { - struct tty_struct *tty = info->port.tty; - info->send_outstanding++; - info->msr &= ~UART_MSR_CTS; - info->lsr &= ~UART_LSR_TEMT; - tty_wakeup(tty); - return; - } - if (slen < 0) { - /* Error: no channel, already shutdown, or wrong parameter */ - dev_kfree_skb(skb); - return; - } - skb_queue_head(&info->xmit_queue, skb); -} - -#ifdef CONFIG_ISDN_AUDIO -static int -isdn_tty_countDLE(unsigned char *buf, int len) -{ - int count = 0; - - while (len--) - if (*buf++ == DLE) - count++; - return count; -} - -/* This routine is called from within isdn_tty_write() to perform - * DLE-decoding when sending audio-data. - */ -static int -isdn_tty_handleDLEdown(modem_info *info, atemu *m, int len) -{ - unsigned char *p = &info->port.xmit_buf[info->xmit_count]; - int count = 0; - - while (len > 0) { - if (m->lastDLE) { - m->lastDLE = 0; - switch (*p) { - case DLE: - /* Escape code */ - if (len > 1) - memmove(p, p + 1, len - 1); - p--; - count++; - break; - case ETX: - /* End of data */ - info->vonline |= 4; - return count; - case DC4: - /* Abort RX */ - info->vonline &= ~1; -#ifdef ISDN_DEBUG_MODEM_VOICE - printk(KERN_DEBUG - "DLEdown: got DLE-DC4, send DLE-ETX on ttyI%d\n", - info->line); -#endif - isdn_tty_at_cout("\020\003", info); - if (!info->vonline) { -#ifdef ISDN_DEBUG_MODEM_VOICE - printk(KERN_DEBUG - "DLEdown: send VCON on ttyI%d\n", - info->line); -#endif - isdn_tty_at_cout("\r\nVCON\r\n", info); - } - /* Fall through */ - case 'q': - case 's': - /* Silence */ - if (len > 1) - memmove(p, p + 1, len - 1); - p--; - break; - } - } else { - if (*p == DLE) - m->lastDLE = 1; - else - count++; - } - p++; - len--; - } - if (len < 0) { - printk(KERN_WARNING "isdn_tty: len<0 in DLEdown\n"); - return 0; - } - return count; -} - -/* This routine is called from within isdn_tty_write() when receiving - * audio-data. It interrupts receiving, if an character other than - * ^S or ^Q is sent. - */ -static int -isdn_tty_end_vrx(const char *buf, int c) -{ - char ch; - - while (c--) { - ch = *buf; - if ((ch != 0x11) && (ch != 0x13)) - return 1; - buf++; - } - return 0; -} - -static int voice_cf[7] = -{0, 0, 4, 3, 2, 0, 0}; - -#endif /* CONFIG_ISDN_AUDIO */ - -/* isdn_tty_senddown() is called either directly from within isdn_tty_write() - * or via timer-interrupt from within isdn_tty_modem_xmit(). It pulls - * outgoing data from the tty's xmit-buffer, handles voice-decompression or - * T.70 if necessary, and finally queues it up for sending via isdn_tty_tint. - */ -static void -isdn_tty_senddown(modem_info *info) -{ - int buflen; - int skb_res; -#ifdef CONFIG_ISDN_AUDIO - int audio_len; -#endif - struct sk_buff *skb; - -#ifdef CONFIG_ISDN_AUDIO - if (info->vonline & 4) { - info->vonline &= ~6; - if (!info->vonline) { -#ifdef ISDN_DEBUG_MODEM_VOICE - printk(KERN_DEBUG - "senddown: send VCON on ttyI%d\n", - info->line); -#endif - isdn_tty_at_cout("\r\nVCON\r\n", info); - } - } -#endif - if (!(buflen = info->xmit_count)) - return; - if ((info->emu.mdmreg[REG_CTS] & BIT_CTS) != 0) - info->msr &= ~UART_MSR_CTS; - info->lsr &= ~UART_LSR_TEMT; - /* info->xmit_count is modified here and in isdn_tty_write(). - * So we return here if isdn_tty_write() is in the - * critical section. - */ - atomic_inc(&info->xmit_lock); - if (!(atomic_dec_and_test(&info->xmit_lock))) - return; - if (info->isdn_driver < 0) { - info->xmit_count = 0; - return; - } - skb_res = dev->drv[info->isdn_driver]->interface->hl_hdrlen + 4; -#ifdef CONFIG_ISDN_AUDIO - if (info->vonline & 2) - audio_len = buflen * voice_cf[info->emu.vpar[3]]; - else - audio_len = 0; - skb = dev_alloc_skb(skb_res + buflen + audio_len); -#else - skb = dev_alloc_skb(skb_res + buflen); -#endif - if (!skb) { - printk(KERN_WARNING - "isdn_tty: Out of memory in ttyI%d senddown\n", - info->line); - return; - } - skb_reserve(skb, skb_res); - skb_put_data(skb, info->port.xmit_buf, buflen); - info->xmit_count = 0; -#ifdef CONFIG_ISDN_AUDIO - if (info->vonline & 2) { - /* For now, ifmt is fixed to 1 (alaw), since this - * is used with ISDN everywhere in the world, except - * US, Canada and Japan. - * Later, when US-ISDN protocols are implemented, - * this setting will depend on the D-channel protocol. - */ - int ifmt = 1; - - /* voice conversion/decompression */ - switch (info->emu.vpar[3]) { - case 2: - case 3: - case 4: - /* adpcm, compatible to ZyXel 1496 modem - * with ROM revision 6.01 - */ - audio_len = isdn_audio_adpcm2xlaw(info->adpcms, - ifmt, - skb->data, - skb_put(skb, audio_len), - buflen); - skb_pull(skb, buflen); - skb_trim(skb, audio_len); - break; - case 5: - /* a-law */ - if (!ifmt) - isdn_audio_alaw2ulaw(skb->data, - buflen); - break; - case 6: - /* u-law */ - if (ifmt) - isdn_audio_ulaw2alaw(skb->data, - buflen); - break; - } - } -#endif /* CONFIG_ISDN_AUDIO */ - if (info->emu.mdmreg[REG_T70] & BIT_T70) { - /* Add T.70 simplified header */ - if (info->emu.mdmreg[REG_T70] & BIT_T70_EXT) - memcpy(skb_push(skb, 2), "\1\0", 2); - else - memcpy(skb_push(skb, 4), "\1\0\1\0", 4); - } - skb_queue_tail(&info->xmit_queue, skb); -} - -/************************************************************ - * - * Modem-functions - * - * mostly "stolen" from original Linux-serial.c and friends. - * - ************************************************************/ - -/* The next routine is called once from within timer-interrupt - * triggered within isdn_tty_modem_ncarrier(). It calls - * isdn_tty_modem_result() to stuff a "NO CARRIER" Message - * into the tty's buffer. - */ -static void -isdn_tty_modem_do_ncarrier(struct timer_list *t) -{ - modem_info *info = from_timer(info, t, nc_timer); - isdn_tty_modem_result(RESULT_NO_CARRIER, info); -} - -/* Next routine is called, whenever the DTR-signal is raised. - * It checks the ncarrier-flag, and triggers the above routine - * when necessary. The ncarrier-flag is set, whenever DTR goes - * low. - */ -static void -isdn_tty_modem_ncarrier(modem_info *info) -{ - if (info->ncarrier) { - info->nc_timer.expires = jiffies + HZ; - add_timer(&info->nc_timer); - } -} - -/* - * return the usage calculated by si and layer 2 protocol - */ -static int -isdn_calc_usage(int si, int l2) -{ - int usg = ISDN_USAGE_MODEM; - -#ifdef CONFIG_ISDN_AUDIO - if (si == 1) { - switch (l2) { - case ISDN_PROTO_L2_MODEM: - usg = ISDN_USAGE_MODEM; - break; -#ifdef CONFIG_ISDN_TTY_FAX - case ISDN_PROTO_L2_FAX: - usg = ISDN_USAGE_FAX; - break; -#endif - case ISDN_PROTO_L2_TRANS: - default: - usg = ISDN_USAGE_VOICE; - break; - } - } -#endif - return (usg); -} - -/* isdn_tty_dial() performs dialing of a tty an the necessary - * setup of the lower levels before that. - */ -static void -isdn_tty_dial(char *n, modem_info *info, atemu *m) -{ - int usg = ISDN_USAGE_MODEM; - int si = 7; - int l2 = m->mdmreg[REG_L2PROT]; - u_long flags; - isdn_ctrl cmd; - int i; - int j; - - for (j = 7; j >= 0; j--) - if (m->mdmreg[REG_SI1] & (1 << j)) { - si = bit2si[j]; - break; - } - usg = isdn_calc_usage(si, l2); -#ifdef CONFIG_ISDN_AUDIO - if ((si == 1) && - (l2 != ISDN_PROTO_L2_MODEM) -#ifdef CONFIG_ISDN_TTY_FAX - && (l2 != ISDN_PROTO_L2_FAX) -#endif - ) { - l2 = ISDN_PROTO_L2_TRANS; - usg = ISDN_USAGE_VOICE; - } -#endif - m->mdmreg[REG_SI1I] = si2bit[si]; - spin_lock_irqsave(&dev->lock, flags); - i = isdn_get_free_channel(usg, l2, m->mdmreg[REG_L3PROT], -1, -1, m->msn); - if (i < 0) { - spin_unlock_irqrestore(&dev->lock, flags); - isdn_tty_modem_result(RESULT_NO_DIALTONE, info); - } else { - info->isdn_driver = dev->drvmap[i]; - info->isdn_channel = dev->chanmap[i]; - info->drv_index = i; - dev->m_idx[i] = info->line; - dev->usage[i] |= ISDN_USAGE_OUTGOING; - info->last_dir = 1; - strcpy(info->last_num, n); - isdn_info_update(); - spin_unlock_irqrestore(&dev->lock, flags); - cmd.driver = info->isdn_driver; - cmd.arg = info->isdn_channel; - cmd.command = ISDN_CMD_CLREAZ; - isdn_command(&cmd); - strcpy(cmd.parm.num, isdn_map_eaz2msn(m->msn, info->isdn_driver)); - cmd.driver = info->isdn_driver; - cmd.command = ISDN_CMD_SETEAZ; - isdn_command(&cmd); - cmd.driver = info->isdn_driver; - cmd.command = ISDN_CMD_SETL2; - info->last_l2 = l2; - cmd.arg = info->isdn_channel + (l2 << 8); - isdn_command(&cmd); - cmd.driver = info->isdn_driver; - cmd.command = ISDN_CMD_SETL3; - cmd.arg = info->isdn_channel + (m->mdmreg[REG_L3PROT] << 8); -#ifdef CONFIG_ISDN_TTY_FAX - if (l2 == ISDN_PROTO_L2_FAX) { - cmd.parm.fax = info->fax; - info->fax->direction = ISDN_TTY_FAX_CONN_OUT; - } -#endif - isdn_command(&cmd); - cmd.driver = info->isdn_driver; - cmd.arg = info->isdn_channel; - sprintf(cmd.parm.setup.phone, "%s", n); - sprintf(cmd.parm.setup.eazmsn, "%s", - isdn_map_eaz2msn(m->msn, info->isdn_driver)); - cmd.parm.setup.si1 = si; - cmd.parm.setup.si2 = m->mdmreg[REG_SI2]; - cmd.command = ISDN_CMD_DIAL; - info->dialing = 1; - info->emu.carrierwait = 0; - strcpy(dev->num[i], n); - isdn_info_update(); - isdn_command(&cmd); - isdn_timer_ctrl(ISDN_TIMER_CARRIER, 1); - } -} - -/* isdn_tty_hangup() disassociates a tty from the real - * ISDN-line (hangup). The usage-status is cleared - * and some cleanup is done also. - */ -void -isdn_tty_modem_hup(modem_info *info, int local) -{ - isdn_ctrl cmd; - int di, ch; - - if (!info) - return; - - di = info->isdn_driver; - ch = info->isdn_channel; - if (di < 0 || ch < 0) - return; - - info->isdn_driver = -1; - info->isdn_channel = -1; - -#ifdef ISDN_DEBUG_MODEM_HUP - printk(KERN_DEBUG "Mhup ttyI%d\n", info->line); -#endif - info->rcvsched = 0; - isdn_tty_flush_buffer(info->port.tty); - if (info->online) { - info->last_lhup = local; - info->online = 0; - isdn_tty_modem_result(RESULT_NO_CARRIER, info); - } -#ifdef CONFIG_ISDN_AUDIO - info->vonline = 0; -#ifdef CONFIG_ISDN_TTY_FAX - info->faxonline = 0; - info->fax->phase = ISDN_FAX_PHASE_IDLE; -#endif - info->emu.vpar[4] = 0; - info->emu.vpar[5] = 8; - kfree(info->dtmf_state); - info->dtmf_state = NULL; - kfree(info->silence_state); - info->silence_state = NULL; - kfree(info->adpcms); - info->adpcms = NULL; - kfree(info->adpcmr); - info->adpcmr = NULL; -#endif - if ((info->msr & UART_MSR_RI) && - (info->emu.mdmreg[REG_RUNG] & BIT_RUNG)) - isdn_tty_modem_result(RESULT_RUNG, info); - info->msr &= ~(UART_MSR_DCD | UART_MSR_RI); - info->lsr |= UART_LSR_TEMT; - - if (local) { - cmd.driver = di; - cmd.command = ISDN_CMD_HANGUP; - cmd.arg = ch; - isdn_command(&cmd); - } - - isdn_all_eaz(di, ch); - info->emu.mdmreg[REG_RINGCNT] = 0; - isdn_free_channel(di, ch, 0); - - if (info->drv_index >= 0) { - dev->m_idx[info->drv_index] = -1; - info->drv_index = -1; - } -} - -/* - * Begin of a CAPI like interface, currently used only for - * supplementary service (CAPI 2.0 part III) - */ -#include <linux/isdn/capicmd.h> -#include <linux/module.h> - -int -isdn_tty_capi_facility(capi_msg *cm) { - return (-1); /* dummy */ -} - -/* isdn_tty_suspend() tries to suspend the current tty connection - */ -static void -isdn_tty_suspend(char *id, modem_info *info, atemu *m) -{ - isdn_ctrl cmd; - - int l; - - if (!info) - return; - -#ifdef ISDN_DEBUG_MODEM_SERVICES - printk(KERN_DEBUG "Msusp ttyI%d\n", info->line); -#endif - l = strlen(id); - if ((info->isdn_driver >= 0)) { - cmd.parm.cmsg.Length = l + 18; - cmd.parm.cmsg.Command = CAPI_FACILITY; - cmd.parm.cmsg.Subcommand = CAPI_REQ; - cmd.parm.cmsg.adr.Controller = info->isdn_driver + 1; - cmd.parm.cmsg.para[0] = 3; /* 16 bit 0x0003 suplementary service */ - cmd.parm.cmsg.para[1] = 0; - cmd.parm.cmsg.para[2] = l + 3; - cmd.parm.cmsg.para[3] = 4; /* 16 bit 0x0004 Suspend */ - cmd.parm.cmsg.para[4] = 0; - cmd.parm.cmsg.para[5] = l; - memcpy(&cmd.parm.cmsg.para[6], id, l); - cmd.command = CAPI_PUT_MESSAGE; - cmd.driver = info->isdn_driver; - cmd.arg = info->isdn_channel; - isdn_command(&cmd); - } -} - -/* isdn_tty_resume() tries to resume a suspended call - * setup of the lower levels before that. unfortunately here is no - * checking for compatibility of used protocols implemented by Q931 - * It does the same things like isdn_tty_dial, the last command - * is different, may be we can merge it. - */ - -static void -isdn_tty_resume(char *id, modem_info *info, atemu *m) -{ - int usg = ISDN_USAGE_MODEM; - int si = 7; - int l2 = m->mdmreg[REG_L2PROT]; - isdn_ctrl cmd; - ulong flags; - int i; - int j; - int l; - - l = strlen(id); - for (j = 7; j >= 0; j--) - if (m->mdmreg[REG_SI1] & (1 << j)) { - si = bit2si[j]; - break; - } - usg = isdn_calc_usage(si, l2); -#ifdef CONFIG_ISDN_AUDIO - if ((si == 1) && - (l2 != ISDN_PROTO_L2_MODEM) -#ifdef CONFIG_ISDN_TTY_FAX - && (l2 != ISDN_PROTO_L2_FAX) -#endif - ) { - l2 = ISDN_PROTO_L2_TRANS; - usg = ISDN_USAGE_VOICE; - } -#endif - m->mdmreg[REG_SI1I] = si2bit[si]; - spin_lock_irqsave(&dev->lock, flags); - i = isdn_get_free_channel(usg, l2, m->mdmreg[REG_L3PROT], -1, -1, m->msn); - if (i < 0) { - spin_unlock_irqrestore(&dev->lock, flags); - isdn_tty_modem_result(RESULT_NO_DIALTONE, info); - } else { - info->isdn_driver = dev->drvmap[i]; - info->isdn_channel = dev->chanmap[i]; - info->drv_index = i; - dev->m_idx[i] = info->line; - dev->usage[i] |= ISDN_USAGE_OUTGOING; - info->last_dir = 1; -// strcpy(info->last_num, n); - isdn_info_update(); - spin_unlock_irqrestore(&dev->lock, flags); - cmd.driver = info->isdn_driver; - cmd.arg = info->isdn_channel; - cmd.command = ISDN_CMD_CLREAZ; - isdn_command(&cmd); - strcpy(cmd.parm.num, isdn_map_eaz2msn(m->msn, info->isdn_driver)); - cmd.driver = info->isdn_driver; - cmd.command = ISDN_CMD_SETEAZ; - isdn_command(&cmd); - cmd.driver = info->isdn_driver; - cmd.command = ISDN_CMD_SETL2; - info->last_l2 = l2; - cmd.arg = info->isdn_channel + (l2 << 8); - isdn_command(&cmd); - cmd.driver = info->isdn_driver; - cmd.command = ISDN_CMD_SETL3; - cmd.arg = info->isdn_channel + (m->mdmreg[REG_L3PROT] << 8); - isdn_command(&cmd); - cmd.driver = info->isdn_driver; - cmd.arg = info->isdn_channel; - cmd.parm.cmsg.Length = l + 18; - cmd.parm.cmsg.Command = CAPI_FACILITY; - cmd.parm.cmsg.Subcommand = CAPI_REQ; - cmd.parm.cmsg.adr.Controller = info->isdn_driver + 1; - cmd.parm.cmsg.para[0] = 3; /* 16 bit 0x0003 suplementary service */ - cmd.parm.cmsg.para[1] = 0; - cmd.parm.cmsg.para[2] = l + 3; - cmd.parm.cmsg.para[3] = 5; /* 16 bit 0x0005 Resume */ - cmd.parm.cmsg.para[4] = 0; - cmd.parm.cmsg.para[5] = l; - memcpy(&cmd.parm.cmsg.para[6], id, l); - cmd.command = CAPI_PUT_MESSAGE; - info->dialing = 1; -// strcpy(dev->num[i], n); - isdn_info_update(); - isdn_command(&cmd); - isdn_timer_ctrl(ISDN_TIMER_CARRIER, 1); - } -} - -/* isdn_tty_send_msg() sends a message to a HL driver - * This is used for hybrid modem cards to send AT commands to it - */ - -static void -isdn_tty_send_msg(modem_info *info, atemu *m, char *msg) -{ - int usg = ISDN_USAGE_MODEM; - int si = 7; - int l2 = m->mdmreg[REG_L2PROT]; - isdn_ctrl cmd; - ulong flags; - int i; - int j; - int l; - - l = min(strlen(msg), sizeof(cmd.parm) - sizeof(cmd.parm.cmsg) - + sizeof(cmd.parm.cmsg.para) - 2); - - if (!l) { - isdn_tty_modem_result(RESULT_ERROR, info); - return; - } - for (j = 7; j >= 0; j--) - if (m->mdmreg[REG_SI1] & (1 << j)) { - si = bit2si[j]; - break; - } - usg = isdn_calc_usage(si, l2); -#ifdef CONFIG_ISDN_AUDIO - if ((si == 1) && - (l2 != ISDN_PROTO_L2_MODEM) -#ifdef CONFIG_ISDN_TTY_FAX - && (l2 != ISDN_PROTO_L2_FAX) -#endif - ) { - l2 = ISDN_PROTO_L2_TRANS; - usg = ISDN_USAGE_VOICE; - } -#endif - m->mdmreg[REG_SI1I] = si2bit[si]; - spin_lock_irqsave(&dev->lock, flags); - i = isdn_get_free_channel(usg, l2, m->mdmreg[REG_L3PROT], -1, -1, m->msn); - if (i < 0) { - spin_unlock_irqrestore(&dev->lock, flags); - isdn_tty_modem_result(RESULT_NO_DIALTONE, info); - } else { - info->isdn_driver = dev->drvmap[i]; - info->isdn_channel = dev->chanmap[i]; - info->drv_index = i; - dev->m_idx[i] = info->line; - dev->usage[i] |= ISDN_USAGE_OUTGOING; - info->last_dir = 1; - isdn_info_update(); - spin_unlock_irqrestore(&dev->lock, flags); - cmd.driver = info->isdn_driver; - cmd.arg = info->isdn_channel; - cmd.command = ISDN_CMD_CLREAZ; - isdn_command(&cmd); - strcpy(cmd.parm.num, isdn_map_eaz2msn(m->msn, info->isdn_driver)); - cmd.driver = info->isdn_driver; - cmd.command = ISDN_CMD_SETEAZ; - isdn_command(&cmd); - cmd.driver = info->isdn_driver; - cmd.command = ISDN_CMD_SETL2; - info->last_l2 = l2; - cmd.arg = info->isdn_channel + (l2 << 8); - isdn_command(&cmd); - cmd.driver = info->isdn_driver; - cmd.command = ISDN_CMD_SETL3; - cmd.arg = info->isdn_channel + (m->mdmreg[REG_L3PROT] << 8); - isdn_command(&cmd); - cmd.driver = info->isdn_driver; - cmd.arg = info->isdn_channel; - cmd.parm.cmsg.Length = l + 14; - cmd.parm.cmsg.Command = CAPI_MANUFACTURER; - cmd.parm.cmsg.Subcommand = CAPI_REQ; - cmd.parm.cmsg.adr.Controller = info->isdn_driver + 1; - cmd.parm.cmsg.para[0] = l + 1; - strncpy(&cmd.parm.cmsg.para[1], msg, l); - cmd.parm.cmsg.para[l + 1] = 0xd; - cmd.command = CAPI_PUT_MESSAGE; -/* info->dialing = 1; - strcpy(dev->num[i], n); - isdn_info_update(); -*/ - isdn_command(&cmd); - } -} - -static inline int -isdn_tty_paranoia_check(modem_info *info, char *name, const char *routine) -{ -#ifdef MODEM_PARANOIA_CHECK - if (!info) { - printk(KERN_WARNING "isdn_tty: null info_struct for %s in %s\n", - name, routine); - return 1; - } - if (info->magic != ISDN_ASYNC_MAGIC) { - printk(KERN_WARNING "isdn_tty: bad magic for modem struct %s in %s\n", - name, routine); - return 1; - } -#endif - return 0; -} - -/* - * This routine is called to set the UART divisor registers to match - * the specified baud rate for a serial port. - */ -static void -isdn_tty_change_speed(modem_info *info) -{ - struct tty_port *port = &info->port; - uint cflag, - cval, - quot; - int i; - - if (!port->tty) - return; - cflag = port->tty->termios.c_cflag; - - quot = i = cflag & CBAUD; - if (i & CBAUDEX) { - i &= ~CBAUDEX; - if (i < 1 || i > 2) - port->tty->termios.c_cflag &= ~CBAUDEX; - else - i += 15; - } - if (quot) { - info->mcr |= UART_MCR_DTR; - isdn_tty_modem_ncarrier(info); - } else { - info->mcr &= ~UART_MCR_DTR; - if (info->emu.mdmreg[REG_DTRHUP] & BIT_DTRHUP) { -#ifdef ISDN_DEBUG_MODEM_HUP - printk(KERN_DEBUG "Mhup in changespeed\n"); -#endif - if (info->online) - info->ncarrier = 1; - isdn_tty_modem_reset_regs(info, 0); - isdn_tty_modem_hup(info, 1); - } - return; - } - /* byte size and parity */ - cval = cflag & (CSIZE | CSTOPB); - cval >>= 4; - if (cflag & PARENB) - cval |= UART_LCR_PARITY; - if (!(cflag & PARODD)) - cval |= UART_LCR_EPAR; - - tty_port_set_check_carrier(port, ~cflag & CLOCAL); -} - -static int -isdn_tty_startup(modem_info *info) -{ - if (tty_port_initialized(&info->port)) - return 0; - isdn_lock_drivers(); -#ifdef ISDN_DEBUG_MODEM_OPEN - printk(KERN_DEBUG "starting up ttyi%d ...\n", info->line); -#endif - /* - * Now, initialize the UART - */ - info->mcr = UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2; - if (info->port.tty) - clear_bit(TTY_IO_ERROR, &info->port.tty->flags); - /* - * and set the speed of the serial port - */ - isdn_tty_change_speed(info); - - tty_port_set_initialized(&info->port, 1); - info->msr |= (UART_MSR_DSR | UART_MSR_CTS); - info->send_outstanding = 0; - return 0; -} - -/* - * This routine will shutdown a serial port; interrupts are disabled, and - * DTR is dropped if the hangup on close termio flag is on. - */ -static void -isdn_tty_shutdown(modem_info *info) -{ - if (!tty_port_initialized(&info->port)) - return; -#ifdef ISDN_DEBUG_MODEM_OPEN - printk(KERN_DEBUG "Shutting down isdnmodem port %d ....\n", info->line); -#endif - isdn_unlock_drivers(); - info->msr &= ~UART_MSR_RI; - if (!info->port.tty || (info->port.tty->termios.c_cflag & HUPCL)) { - info->mcr &= ~(UART_MCR_DTR | UART_MCR_RTS); - if (info->emu.mdmreg[REG_DTRHUP] & BIT_DTRHUP) { - isdn_tty_modem_reset_regs(info, 0); -#ifdef ISDN_DEBUG_MODEM_HUP - printk(KERN_DEBUG "Mhup in isdn_tty_shutdown\n"); -#endif - isdn_tty_modem_hup(info, 1); - } - } - if (info->port.tty) - set_bit(TTY_IO_ERROR, &info->port.tty->flags); - - tty_port_set_initialized(&info->port, 0); -} - -/* isdn_tty_write() is the main send-routine. It is called from the upper - * levels within the kernel to perform sending data. Depending on the - * online-flag it either directs output to the at-command-interpreter or - * to the lower level. Additional tasks done here: - * - If online, check for escape-sequence (+++) - * - If sending audio-data, call isdn_tty_DLEdown() to parse DLE-codes. - * - If receiving audio-data, call isdn_tty_end_vrx() to abort if needed. - * - If dialing, abort dial. - */ -static int -isdn_tty_write(struct tty_struct *tty, const u_char *buf, int count) -{ - int c; - int total = 0; - modem_info *info = (modem_info *) tty->driver_data; - atemu *m = &info->emu; - - if (isdn_tty_paranoia_check(info, tty->name, "isdn_tty_write")) - return 0; - /* See isdn_tty_senddown() */ - atomic_inc(&info->xmit_lock); - while (1) { - c = count; - if (c > info->xmit_size - info->xmit_count) - c = info->xmit_size - info->xmit_count; - if (info->isdn_driver >= 0 && c > dev->drv[info->isdn_driver]->maxbufsize) - c = dev->drv[info->isdn_driver]->maxbufsize; - if (c <= 0) - break; - if ((info->online > 1) -#ifdef CONFIG_ISDN_AUDIO - || (info->vonline & 3) -#endif - ) { -#ifdef CONFIG_ISDN_AUDIO - if (!info->vonline) -#endif - isdn_tty_check_esc(buf, m->mdmreg[REG_ESC], c, - &(m->pluscount), - &(m->lastplus)); - memcpy(&info->port.xmit_buf[info->xmit_count], buf, c); -#ifdef CONFIG_ISDN_AUDIO - if (info->vonline) { - int cc = isdn_tty_handleDLEdown(info, m, c); - if (info->vonline & 2) { - if (!cc) { - /* If DLE decoding results in zero-transmit, but - * c originally was non-zero, do a wakeup. - */ - tty_wakeup(tty); - info->msr |= UART_MSR_CTS; - info->lsr |= UART_LSR_TEMT; - } - info->xmit_count += cc; - } - if ((info->vonline & 3) == 1) { - /* Do NOT handle Ctrl-Q or Ctrl-S - * when in full-duplex audio mode. - */ - if (isdn_tty_end_vrx(buf, c)) { - info->vonline &= ~1; -#ifdef ISDN_DEBUG_MODEM_VOICE - printk(KERN_DEBUG - "got !^Q/^S, send DLE-ETX,VCON on ttyI%d\n", - info->line); -#endif - isdn_tty_at_cout("\020\003\r\nVCON\r\n", info); - } - } - } else - if (TTY_IS_FCLASS1(info)) { - int cc = isdn_tty_handleDLEdown(info, m, c); - - if (info->vonline & 4) { /* ETX seen */ - isdn_ctrl c; - - c.command = ISDN_CMD_FAXCMD; - c.driver = info->isdn_driver; - c.arg = info->isdn_channel; - c.parm.aux.cmd = ISDN_FAX_CLASS1_CTRL; - c.parm.aux.subcmd = ETX; - isdn_command(&c); - } - info->vonline = 0; -#ifdef ISDN_DEBUG_MODEM_VOICE - printk(KERN_DEBUG "fax dle cc/c %d/%d\n", cc, c); -#endif - info->xmit_count += cc; - } else -#endif - info->xmit_count += c; - } else { - info->msr |= UART_MSR_CTS; - info->lsr |= UART_LSR_TEMT; - if (info->dialing) { - info->dialing = 0; -#ifdef ISDN_DEBUG_MODEM_HUP - printk(KERN_DEBUG "Mhup in isdn_tty_write\n"); -#endif - isdn_tty_modem_result(RESULT_NO_CARRIER, info); - isdn_tty_modem_hup(info, 1); - } else - c = isdn_tty_edit_at(buf, c, info); - } - buf += c; - count -= c; - total += c; - } - atomic_dec(&info->xmit_lock); - if ((info->xmit_count) || !skb_queue_empty(&info->xmit_queue)) { - if (m->mdmreg[REG_DXMT] & BIT_DXMT) { - isdn_tty_senddown(info); - isdn_tty_tint(info); - } - isdn_timer_ctrl(ISDN_TIMER_MODEMXMIT, 1); - } - return total; -} - -static int -isdn_tty_write_room(struct tty_struct *tty) -{ - modem_info *info = (modem_info *) tty->driver_data; - int ret; - - if (isdn_tty_paranoia_check(info, tty->name, "isdn_tty_write_room")) - return 0; - if (!info->online) - return info->xmit_size; - ret = info->xmit_size - info->xmit_count; - return (ret < 0) ? 0 : ret; -} - -static int -isdn_tty_chars_in_buffer(struct tty_struct *tty) -{ - modem_info *info = (modem_info *) tty->driver_data; - - if (isdn_tty_paranoia_check(info, tty->name, "isdn_tty_chars_in_buffer")) - return 0; - if (!info->online) - return 0; - return (info->xmit_count); -} - -static void -isdn_tty_flush_buffer(struct tty_struct *tty) -{ - modem_info *info; - - if (!tty) { - return; - } - info = (modem_info *) tty->driver_data; - if (isdn_tty_paranoia_check(info, tty->name, "isdn_tty_flush_buffer")) { - return; - } - isdn_tty_cleanup_xmit(info); - info->xmit_count = 0; - tty_wakeup(tty); -} - -static void -isdn_tty_flush_chars(struct tty_struct *tty) -{ - modem_info *info = (modem_info *) tty->driver_data; - - if (isdn_tty_paranoia_check(info, tty->name, "isdn_tty_flush_chars")) - return; - if ((info->xmit_count) || !skb_queue_empty(&info->xmit_queue)) - isdn_timer_ctrl(ISDN_TIMER_MODEMXMIT, 1); -} - -/* - * ------------------------------------------------------------ - * isdn_tty_throttle() - * - * This routine is called by the upper-layer tty layer to signal that - * incoming characters should be throttled. - * ------------------------------------------------------------ - */ -static void -isdn_tty_throttle(struct tty_struct *tty) -{ - modem_info *info = (modem_info *) tty->driver_data; - - if (isdn_tty_paranoia_check(info, tty->name, "isdn_tty_throttle")) - return; - if (I_IXOFF(tty)) - info->x_char = STOP_CHAR(tty); - info->mcr &= ~UART_MCR_RTS; -} - -static void -isdn_tty_unthrottle(struct tty_struct *tty) -{ - modem_info *info = (modem_info *) tty->driver_data; - - if (isdn_tty_paranoia_check(info, tty->name, "isdn_tty_unthrottle")) - return; - if (I_IXOFF(tty)) { - if (info->x_char) - info->x_char = 0; - else - info->x_char = START_CHAR(tty); - } - info->mcr |= UART_MCR_RTS; -} - -/* - * ------------------------------------------------------------ - * isdn_tty_ioctl() and friends - * ------------------------------------------------------------ - */ - -/* - * isdn_tty_get_lsr_info - get line status register info - * - * Purpose: Let user call ioctl() to get info when the UART physically - * is emptied. On bus types like RS485, the transmitter must - * release the bus after transmitting. This must be done when - * the transmit shift register is empty, not be done when the - * transmit holding register is empty. This functionality - * allows RS485 driver to be written in user space. - */ -static int -isdn_tty_get_lsr_info(modem_info *info, uint __user *value) -{ - u_char status; - uint result; - - status = info->lsr; - result = ((status & UART_LSR_TEMT) ? TIOCSER_TEMT : 0); - return put_user(result, value); -} - - -static int -isdn_tty_tiocmget(struct tty_struct *tty) -{ - modem_info *info = (modem_info *) tty->driver_data; - u_char control, status; - - if (isdn_tty_paranoia_check(info, tty->name, __func__)) - return -ENODEV; - if (tty_io_error(tty)) - return -EIO; - - mutex_lock(&modem_info_mutex); -#ifdef ISDN_DEBUG_MODEM_IOCTL - printk(KERN_DEBUG "ttyI%d ioctl TIOCMGET\n", info->line); -#endif - - control = info->mcr; - status = info->msr; - mutex_unlock(&modem_info_mutex); - return ((control & UART_MCR_RTS) ? TIOCM_RTS : 0) - | ((control & UART_MCR_DTR) ? TIOCM_DTR : 0) - | ((status & UART_MSR_DCD) ? TIOCM_CAR : 0) - | ((status & UART_MSR_RI) ? TIOCM_RNG : 0) - | ((status & UART_MSR_DSR) ? TIOCM_DSR : 0) - | ((status & UART_MSR_CTS) ? TIOCM_CTS : 0); -} - -static int -isdn_tty_tiocmset(struct tty_struct *tty, - unsigned int set, unsigned int clear) -{ - modem_info *info = (modem_info *) tty->driver_data; - - if (isdn_tty_paranoia_check(info, tty->name, __func__)) - return -ENODEV; - if (tty_io_error(tty)) - return -EIO; - -#ifdef ISDN_DEBUG_MODEM_IOCTL - printk(KERN_DEBUG "ttyI%d ioctl TIOCMxxx: %x %x\n", info->line, set, clear); -#endif - - mutex_lock(&modem_info_mutex); - if (set & TIOCM_RTS) - info->mcr |= UART_MCR_RTS; - if (set & TIOCM_DTR) { - info->mcr |= UART_MCR_DTR; - isdn_tty_modem_ncarrier(info); - } - - if (clear & TIOCM_RTS) - info->mcr &= ~UART_MCR_RTS; - if (clear & TIOCM_DTR) { - info->mcr &= ~UART_MCR_DTR; - if (info->emu.mdmreg[REG_DTRHUP] & BIT_DTRHUP) { - isdn_tty_modem_reset_regs(info, 0); -#ifdef ISDN_DEBUG_MODEM_HUP - printk(KERN_DEBUG "Mhup in TIOCMSET\n"); -#endif - if (info->online) - info->ncarrier = 1; - isdn_tty_modem_hup(info, 1); - } - } - mutex_unlock(&modem_info_mutex); - return 0; -} - -static int -isdn_tty_ioctl(struct tty_struct *tty, uint cmd, ulong arg) -{ - modem_info *info = (modem_info *) tty->driver_data; - - if (isdn_tty_paranoia_check(info, tty->name, "isdn_tty_ioctl")) - return -ENODEV; - if (tty_io_error(tty)) - return -EIO; - switch (cmd) { - case TIOCSERGETLSR: /* Get line status register */ -#ifdef ISDN_DEBUG_MODEM_IOCTL - printk(KERN_DEBUG "ttyI%d ioctl TIOCSERGETLSR\n", info->line); -#endif - return isdn_tty_get_lsr_info(info, (uint __user *) arg); - default: -#ifdef ISDN_DEBUG_MODEM_IOCTL - printk(KERN_DEBUG "UNKNOWN ioctl 0x%08x on ttyi%d\n", cmd, info->line); -#endif - return -ENOIOCTLCMD; - } - return 0; -} - -static void -isdn_tty_set_termios(struct tty_struct *tty, struct ktermios *old_termios) -{ - modem_info *info = (modem_info *) tty->driver_data; - - mutex_lock(&modem_info_mutex); - if (!old_termios) - isdn_tty_change_speed(info); - else { - if (tty->termios.c_cflag == old_termios->c_cflag && - tty->termios.c_ispeed == old_termios->c_ispeed && - tty->termios.c_ospeed == old_termios->c_ospeed) { - mutex_unlock(&modem_info_mutex); - return; - } - isdn_tty_change_speed(info); - } - mutex_unlock(&modem_info_mutex); -} - -/* - * ------------------------------------------------------------ - * isdn_tty_open() and friends - * ------------------------------------------------------------ - */ - -static int isdn_tty_install(struct tty_driver *driver, struct tty_struct *tty) -{ - modem_info *info = &dev->mdm.info[tty->index]; - - if (isdn_tty_paranoia_check(info, tty->name, __func__)) - return -ENODEV; - - tty->driver_data = info; - - return tty_port_install(&info->port, driver, tty); -} - -/* - * This routine is called whenever a serial port is opened. It - * enables interrupts for a serial port, linking in its async structure into - * the IRQ chain. It also performs the serial-specific - * initialization for the tty structure. - */ -static int -isdn_tty_open(struct tty_struct *tty, struct file *filp) -{ - modem_info *info = tty->driver_data; - struct tty_port *port = &info->port; - int retval; - -#ifdef ISDN_DEBUG_MODEM_OPEN - printk(KERN_DEBUG "isdn_tty_open %s, count = %d\n", tty->name, - port->count); -#endif - port->count++; - port->tty = tty; - /* - * Start up serial port - */ - retval = isdn_tty_startup(info); - if (retval) { -#ifdef ISDN_DEBUG_MODEM_OPEN - printk(KERN_DEBUG "isdn_tty_open return after startup\n"); -#endif - return retval; - } - retval = tty_port_block_til_ready(port, tty, filp); - if (retval) { -#ifdef ISDN_DEBUG_MODEM_OPEN - printk(KERN_DEBUG "isdn_tty_open return after isdn_tty_block_til_ready \n"); -#endif - return retval; - } -#ifdef ISDN_DEBUG_MODEM_OPEN - printk(KERN_DEBUG "isdn_tty_open ttyi%d successful...\n", info->line); -#endif - dev->modempoll++; -#ifdef ISDN_DEBUG_MODEM_OPEN - printk(KERN_DEBUG "isdn_tty_open normal exit\n"); -#endif - return 0; -} - -static void -isdn_tty_close(struct tty_struct *tty, struct file *filp) -{ - modem_info *info = (modem_info *) tty->driver_data; - struct tty_port *port = &info->port; - ulong timeout; - - if (!info || isdn_tty_paranoia_check(info, tty->name, "isdn_tty_close")) - return; - if (tty_hung_up_p(filp)) { -#ifdef ISDN_DEBUG_MODEM_OPEN - printk(KERN_DEBUG "isdn_tty_close return after tty_hung_up_p\n"); -#endif - return; - } - if ((tty->count == 1) && (port->count != 1)) { - /* - * Uh, oh. tty->count is 1, which means that the tty - * structure will be freed. Info->count should always - * be one in these conditions. If it's greater than - * one, we've got real problems, since it means the - * serial port won't be shutdown. - */ - printk(KERN_ERR "isdn_tty_close: bad port count; tty->count is 1, " - "info->count is %d\n", port->count); - port->count = 1; - } - if (--port->count < 0) { - printk(KERN_ERR "isdn_tty_close: bad port count for ttyi%d: %d\n", - info->line, port->count); - port->count = 0; - } - if (port->count) { -#ifdef ISDN_DEBUG_MODEM_OPEN - printk(KERN_DEBUG "isdn_tty_close after info->count != 0\n"); -#endif - return; - } - info->closing = 1; - - tty->closing = 1; - /* - * At this point we stop accepting input. To do this, we - * disable the receive line status interrupts, and tell the - * interrupt driver to stop checking the data ready bit in the - * line status register. - */ - if (tty_port_initialized(port)) { - tty_wait_until_sent(tty, 3000); /* 30 seconds timeout */ - /* - * Before we drop DTR, make sure the UART transmitter - * has completely drained; this is especially - * important if there is a transmit FIFO! - */ - timeout = jiffies + HZ; - while (!(info->lsr & UART_LSR_TEMT)) { - schedule_timeout_interruptible(20); - if (time_after(jiffies, timeout)) - break; - } - } - dev->modempoll--; - isdn_tty_shutdown(info); - isdn_tty_flush_buffer(tty); - tty_ldisc_flush(tty); - port->tty = NULL; - info->ncarrier = 0; - - tty_port_close_end(port, tty); - info->closing = 0; -#ifdef ISDN_DEBUG_MODEM_OPEN - printk(KERN_DEBUG "isdn_tty_close normal exit\n"); -#endif -} - -/* - * isdn_tty_hangup() --- called by tty_hangup() when a hangup is signaled. - */ -static void -isdn_tty_hangup(struct tty_struct *tty) -{ - modem_info *info = (modem_info *) tty->driver_data; - struct tty_port *port = &info->port; - - if (isdn_tty_paranoia_check(info, tty->name, "isdn_tty_hangup")) - return; - isdn_tty_shutdown(info); - port->count = 0; - tty_port_set_active(port, 0); - port->tty = NULL; - wake_up_interruptible(&port->open_wait); -} - -/* This routine initializes all emulator-data. - */ -static void -isdn_tty_reset_profile(atemu *m) -{ - m->profile[0] = 0; - m->profile[1] = 0; - m->profile[2] = 43; - m->profile[3] = 13; - m->profile[4] = 10; - m->profile[5] = 8; - m->profile[6] = 3; - m->profile[7] = 60; - m->profile[8] = 2; - m->profile[9] = 6; - m->profile[10] = 7; - m->profile[11] = 70; - m->profile[12] = 0x45; - m->profile[13] = 4; - m->profile[14] = ISDN_PROTO_L2_X75I; - m->profile[15] = ISDN_PROTO_L3_TRANS; - m->profile[16] = ISDN_SERIAL_XMIT_SIZE / 16; - m->profile[17] = ISDN_MODEM_WINSIZE; - m->profile[18] = 4; - m->profile[19] = 0; - m->profile[20] = 0; - m->profile[23] = 0; - m->pmsn[0] = '\0'; - m->plmsn[0] = '\0'; -} - -#ifdef CONFIG_ISDN_AUDIO -static void -isdn_tty_modem_reset_vpar(atemu *m) -{ - m->vpar[0] = 2; /* Voice-device (2 = phone line) */ - m->vpar[1] = 0; /* Silence detection level (0 = none ) */ - m->vpar[2] = 70; /* Silence interval (7 sec. ) */ - m->vpar[3] = 2; /* Compression type (1 = ADPCM-2 ) */ - m->vpar[4] = 0; /* DTMF detection level (0 = softcode ) */ - m->vpar[5] = 8; /* DTMF interval (8 * 5 ms. ) */ -} -#endif - -#ifdef CONFIG_ISDN_TTY_FAX -static void -isdn_tty_modem_reset_faxpar(modem_info *info) -{ - T30_s *f = info->fax; - - f->code = 0; - f->phase = ISDN_FAX_PHASE_IDLE; - f->direction = 0; - f->resolution = 1; /* fine */ - f->rate = 5; /* 14400 bit/s */ - f->width = 0; - f->length = 0; - f->compression = 0; - f->ecm = 0; - f->binary = 0; - f->scantime = 0; - memset(&f->id[0], 32, FAXIDLEN - 1); - f->id[FAXIDLEN - 1] = 0; - f->badlin = 0; - f->badmul = 0; - f->bor = 0; - f->nbc = 0; - f->cq = 0; - f->cr = 0; - f->ctcrty = 0; - f->minsp = 0; - f->phcto = 30; - f->rel = 0; - memset(&f->pollid[0], 32, FAXIDLEN - 1); - f->pollid[FAXIDLEN - 1] = 0; -} -#endif - -static void -isdn_tty_modem_reset_regs(modem_info *info, int force) -{ - atemu *m = &info->emu; - if ((m->mdmreg[REG_DTRR] & BIT_DTRR) || force) { - memcpy(m->mdmreg, m->profile, ISDN_MODEM_NUMREG); - memcpy(m->msn, m->pmsn, ISDN_MSNLEN); - memcpy(m->lmsn, m->plmsn, ISDN_LMSNLEN); - info->xmit_size = m->mdmreg[REG_PSIZE] * 16; - } -#ifdef CONFIG_ISDN_AUDIO - isdn_tty_modem_reset_vpar(m); -#endif -#ifdef CONFIG_ISDN_TTY_FAX - isdn_tty_modem_reset_faxpar(info); -#endif - m->mdmcmdl = 0; -} - -static void -modem_write_profile(atemu *m) -{ - memcpy(m->profile, m->mdmreg, ISDN_MODEM_NUMREG); - memcpy(m->pmsn, m->msn, ISDN_MSNLEN); - memcpy(m->plmsn, m->lmsn, ISDN_LMSNLEN); - if (dev->profd) - send_sig(SIGIO, dev->profd, 1); -} - -static const struct tty_operations modem_ops = { - .install = isdn_tty_install, - .open = isdn_tty_open, - .close = isdn_tty_close, - .write = isdn_tty_write, - .flush_chars = isdn_tty_flush_chars, - .write_room = isdn_tty_write_room, - .chars_in_buffer = isdn_tty_chars_in_buffer, - .flush_buffer = isdn_tty_flush_buffer, - .ioctl = isdn_tty_ioctl, - .throttle = isdn_tty_throttle, - .unthrottle = isdn_tty_unthrottle, - .set_termios = isdn_tty_set_termios, - .hangup = isdn_tty_hangup, - .tiocmget = isdn_tty_tiocmget, - .tiocmset = isdn_tty_tiocmset, -}; - -static int isdn_tty_carrier_raised(struct tty_port *port) -{ - modem_info *info = container_of(port, modem_info, port); - return info->msr & UART_MSR_DCD; -} - -static const struct tty_port_operations isdn_tty_port_ops = { - .carrier_raised = isdn_tty_carrier_raised, -}; - -int -isdn_tty_modem_init(void) -{ - isdn_modem_t *m; - int i, retval; - modem_info *info; - - m = &dev->mdm; - m->tty_modem = alloc_tty_driver(ISDN_MAX_CHANNELS); - if (!m->tty_modem) - return -ENOMEM; - m->tty_modem->name = "ttyI"; - m->tty_modem->major = ISDN_TTY_MAJOR; - m->tty_modem->minor_start = 0; - m->tty_modem->type = TTY_DRIVER_TYPE_SERIAL; - m->tty_modem->subtype = SERIAL_TYPE_NORMAL; - m->tty_modem->init_termios = tty_std_termios; - m->tty_modem->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL; - m->tty_modem->flags = TTY_DRIVER_REAL_RAW; - m->tty_modem->driver_name = "isdn_tty"; - tty_set_operations(m->tty_modem, &modem_ops); - retval = tty_register_driver(m->tty_modem); - if (retval) { - printk(KERN_WARNING "isdn_tty: Couldn't register modem-device\n"); - goto err; - } - for (i = 0; i < ISDN_MAX_CHANNELS; i++) { - info = &m->info[i]; -#ifdef CONFIG_ISDN_TTY_FAX - if (!(info->fax = kmalloc(sizeof(T30_s), GFP_KERNEL))) { - printk(KERN_ERR "Could not allocate fax t30-buffer\n"); - retval = -ENOMEM; - goto err_unregister; - } -#endif - tty_port_init(&info->port); - info->port.ops = &isdn_tty_port_ops; - spin_lock_init(&info->readlock); - sprintf(info->last_cause, "0000"); - sprintf(info->last_num, "none"); - info->last_dir = 0; - info->last_lhup = 1; - info->last_l2 = -1; - info->last_si = 0; - isdn_tty_reset_profile(&info->emu); - isdn_tty_modem_reset_regs(info, 1); - info->magic = ISDN_ASYNC_MAGIC; - info->line = i; - info->x_char = 0; - info->isdn_driver = -1; - info->isdn_channel = -1; - info->drv_index = -1; - info->xmit_size = ISDN_SERIAL_XMIT_SIZE; - timer_setup(&info->nc_timer, isdn_tty_modem_do_ncarrier, 0); - skb_queue_head_init(&info->xmit_queue); -#ifdef CONFIG_ISDN_AUDIO - skb_queue_head_init(&info->dtmf_queue); -#endif - info->port.xmit_buf = kmalloc(ISDN_SERIAL_XMIT_MAX + 5, - GFP_KERNEL); - if (!info->port.xmit_buf) { - printk(KERN_ERR "Could not allocate modem xmit-buffer\n"); - retval = -ENOMEM; - goto err_unregister; - } - /* Make room for T.70 header */ - info->port.xmit_buf += 4; - } - return 0; -err_unregister: - for (i--; i >= 0; i--) { - info = &m->info[i]; -#ifdef CONFIG_ISDN_TTY_FAX - kfree(info->fax); -#endif - kfree(info->port.xmit_buf - 4); - info->port.xmit_buf = NULL; - tty_port_destroy(&info->port); - } - tty_unregister_driver(m->tty_modem); -err: - put_tty_driver(m->tty_modem); - m->tty_modem = NULL; - return retval; -} - -void -isdn_tty_exit(void) -{ - modem_info *info; - int i; - - for (i = 0; i < ISDN_MAX_CHANNELS; i++) { - info = &dev->mdm.info[i]; - isdn_tty_cleanup_xmit(info); -#ifdef CONFIG_ISDN_TTY_FAX - kfree(info->fax); -#endif - kfree(info->port.xmit_buf - 4); - info->port.xmit_buf = NULL; - tty_port_destroy(&info->port); - } - tty_unregister_driver(dev->mdm.tty_modem); - put_tty_driver(dev->mdm.tty_modem); - dev->mdm.tty_modem = NULL; -} - - -/* - * isdn_tty_match_icall(char *MSN, atemu *tty_emulator, int dev_idx) - * match the MSN against the MSNs (glob patterns) defined for tty_emulator, - * and return 0 for match, 1 for no match, 2 if MSN could match if longer. - */ - -static int -isdn_tty_match_icall(char *cid, atemu *emu, int di) -{ -#ifdef ISDN_DEBUG_MODEM_ICALL - printk(KERN_DEBUG "m_fi: msn=%s lmsn=%s mmsn=%s mreg[SI1]=%d mreg[SI2]=%d\n", - emu->msn, emu->lmsn, isdn_map_eaz2msn(emu->msn, di), - emu->mdmreg[REG_SI1], emu->mdmreg[REG_SI2]); -#endif - if (strlen(emu->lmsn)) { - char *p = emu->lmsn; - char *q; - int tmp; - int ret = 0; - - while (1) { - if ((q = strchr(p, ';'))) - *q = '\0'; - if ((tmp = isdn_msncmp(cid, isdn_map_eaz2msn(p, di))) > ret) - ret = tmp; -#ifdef ISDN_DEBUG_MODEM_ICALL - printk(KERN_DEBUG "m_fi: lmsnX=%s mmsn=%s -> tmp=%d\n", - p, isdn_map_eaz2msn(emu->msn, di), tmp); -#endif - if (q) { - *q = ';'; - p = q; - p++; - } - if (!tmp) - return 0; - if (!q) - break; - } - return ret; - } else { - int tmp; - tmp = isdn_msncmp(cid, isdn_map_eaz2msn(emu->msn, di)); -#ifdef ISDN_DEBUG_MODEM_ICALL - printk(KERN_DEBUG "m_fi: mmsn=%s -> tmp=%d\n", - isdn_map_eaz2msn(emu->msn, di), tmp); -#endif - return tmp; - } -} - -/* - * An incoming call-request has arrived. - * Search the tty-devices for an appropriate device and bind - * it to the ISDN-Channel. - * Return: - * - * 0 = No matching device found. - * 1 = A matching device found. - * 3 = No match found, but eventually would match, if - * CID is longer. - */ -int -isdn_tty_find_icall(int di, int ch, setup_parm *setup) -{ - char *eaz; - int i; - int wret; - int idx; - int si1; - int si2; - char *nr; - ulong flags; - - if (!setup->phone[0]) { - nr = "0"; - printk(KERN_INFO "isdn_tty: Incoming call without OAD, assuming '0'\n"); - } else - nr = setup->phone; - si1 = (int) setup->si1; - si2 = (int) setup->si2; - if (!setup->eazmsn[0]) { - printk(KERN_WARNING "isdn_tty: Incoming call without CPN, assuming '0'\n"); - eaz = "0"; - } else - eaz = setup->eazmsn; -#ifdef ISDN_DEBUG_MODEM_ICALL - printk(KERN_DEBUG "m_fi: eaz=%s si1=%d si2=%d\n", eaz, si1, si2); -#endif - wret = 0; - spin_lock_irqsave(&dev->lock, flags); - for (i = 0; i < ISDN_MAX_CHANNELS; i++) { - modem_info *info = &dev->mdm.info[i]; - - if (info->port.count == 0) - continue; - if ((info->emu.mdmreg[REG_SI1] & si2bit[si1]) && /* SI1 is matching */ - (info->emu.mdmreg[REG_SI2] == si2)) { /* SI2 is matching */ - idx = isdn_dc2minor(di, ch); -#ifdef ISDN_DEBUG_MODEM_ICALL - printk(KERN_DEBUG "m_fi: match1 wret=%d\n", wret); - printk(KERN_DEBUG "m_fi: idx=%d flags=%08lx drv=%d ch=%d usg=%d\n", idx, - info->port.flags, info->isdn_driver, - info->isdn_channel, dev->usage[idx]); -#endif - if ( -#ifndef FIX_FILE_TRANSFER - tty_port_active(&info->port) && -#endif - (info->isdn_driver == -1) && - (info->isdn_channel == -1) && - (USG_NONE(dev->usage[idx]))) { - int matchret; - - if ((matchret = isdn_tty_match_icall(eaz, &info->emu, di)) > wret) - wret = matchret; - if (!matchret) { /* EAZ is matching */ - info->isdn_driver = di; - info->isdn_channel = ch; - info->drv_index = idx; - dev->m_idx[idx] = info->line; - dev->usage[idx] &= ISDN_USAGE_EXCLUSIVE; - dev->usage[idx] |= isdn_calc_usage(si1, info->emu.mdmreg[REG_L2PROT]); - strcpy(dev->num[idx], nr); - strcpy(info->emu.cpn, eaz); - info->emu.mdmreg[REG_SI1I] = si2bit[si1]; - info->emu.mdmreg[REG_PLAN] = setup->plan; - info->emu.mdmreg[REG_SCREEN] = setup->screen; - isdn_info_update(); - spin_unlock_irqrestore(&dev->lock, flags); - printk(KERN_INFO "isdn_tty: call from %s, -> RING on ttyI%d\n", nr, - info->line); - info->msr |= UART_MSR_RI; - isdn_tty_modem_result(RESULT_RING, info); - isdn_timer_ctrl(ISDN_TIMER_MODEMRING, 1); - return 1; - } - } - } - } - spin_unlock_irqrestore(&dev->lock, flags); - printk(KERN_INFO "isdn_tty: call from %s -> %s %s\n", nr, eaz, - ((dev->drv[di]->flags & DRV_FLAG_REJBUS) && (wret != 2)) ? "rejected" : "ignored"); - return (wret == 2) ? 3 : 0; -} - -int -isdn_tty_stat_callback(int i, isdn_ctrl *c) -{ - int mi; - modem_info *info; - char *e; - - if (i < 0) - return 0; - if ((mi = dev->m_idx[i]) >= 0) { - info = &dev->mdm.info[mi]; - switch (c->command) { - case ISDN_STAT_CINF: - printk(KERN_DEBUG "CHARGEINFO on ttyI%d: %ld %s\n", info->line, c->arg, c->parm.num); - info->emu.charge = (unsigned) simple_strtoul(c->parm.num, &e, 10); - if (e == (char *)c->parm.num) - info->emu.charge = 0; - - break; - case ISDN_STAT_BSENT: -#ifdef ISDN_TTY_STAT_DEBUG - printk(KERN_DEBUG "tty_STAT_BSENT ttyI%d\n", info->line); -#endif - if ((info->isdn_driver == c->driver) && - (info->isdn_channel == c->arg)) { - info->msr |= UART_MSR_CTS; - if (info->send_outstanding) - if (!(--info->send_outstanding)) - info->lsr |= UART_LSR_TEMT; - isdn_tty_tint(info); - return 1; - } - break; - case ISDN_STAT_CAUSE: -#ifdef ISDN_TTY_STAT_DEBUG - printk(KERN_DEBUG "tty_STAT_CAUSE ttyI%d\n", info->line); -#endif - /* Signal cause to tty-device */ - strncpy(info->last_cause, c->parm.num, 5); - return 1; - case ISDN_STAT_DISPLAY: -#ifdef ISDN_TTY_STAT_DEBUG - printk(KERN_DEBUG "tty_STAT_DISPLAY ttyI%d\n", info->line); -#endif - /* Signal display to tty-device */ - if ((info->emu.mdmreg[REG_DISPLAY] & BIT_DISPLAY) && - !(info->emu.mdmreg[REG_RESPNUM] & BIT_RESPNUM)) { - isdn_tty_at_cout("\r\n", info); - isdn_tty_at_cout("DISPLAY: ", info); - isdn_tty_at_cout(c->parm.display, info); - isdn_tty_at_cout("\r\n", info); - } - return 1; - case ISDN_STAT_DCONN: -#ifdef ISDN_TTY_STAT_DEBUG - printk(KERN_DEBUG "tty_STAT_DCONN ttyI%d\n", info->line); -#endif - if (tty_port_active(&info->port)) { - if (info->dialing == 1) { - info->dialing = 2; - return 1; - } - } - break; - case ISDN_STAT_DHUP: -#ifdef ISDN_TTY_STAT_DEBUG - printk(KERN_DEBUG "tty_STAT_DHUP ttyI%d\n", info->line); -#endif - if (tty_port_active(&info->port)) { - if (info->dialing == 1) - isdn_tty_modem_result(RESULT_BUSY, info); - if (info->dialing > 1) - isdn_tty_modem_result(RESULT_NO_CARRIER, info); - info->dialing = 0; -#ifdef ISDN_DEBUG_MODEM_HUP - printk(KERN_DEBUG "Mhup in ISDN_STAT_DHUP\n"); -#endif - isdn_tty_modem_hup(info, 0); - return 1; - } - break; - case ISDN_STAT_BCONN: -#ifdef ISDN_TTY_STAT_DEBUG - printk(KERN_DEBUG "tty_STAT_BCONN ttyI%d\n", info->line); -#endif - /* Wake up any processes waiting - * for incoming call of this device when - * DCD follow the state of incoming carrier - */ - if (info->port.blocked_open && - (info->emu.mdmreg[REG_DCD] & BIT_DCD)) { - wake_up_interruptible(&info->port.open_wait); - } - - /* Schedule CONNECT-Message to any tty - * waiting for it and - * set DCD-bit of its modem-status. - */ - if (tty_port_active(&info->port) || - (info->port.blocked_open && - (info->emu.mdmreg[REG_DCD] & BIT_DCD))) { - info->msr |= UART_MSR_DCD; - info->emu.charge = 0; - if (info->dialing & 0xf) - info->last_dir = 1; - else - info->last_dir = 0; - info->dialing = 0; - info->rcvsched = 1; - if (USG_MODEM(dev->usage[i])) { - if (info->emu.mdmreg[REG_L2PROT] == ISDN_PROTO_L2_MODEM) { - strcpy(info->emu.connmsg, c->parm.num); - isdn_tty_modem_result(RESULT_CONNECT, info); - } else - isdn_tty_modem_result(RESULT_CONNECT64000, info); - } - if (USG_VOICE(dev->usage[i])) - isdn_tty_modem_result(RESULT_VCON, info); - return 1; - } - break; - case ISDN_STAT_BHUP: -#ifdef ISDN_TTY_STAT_DEBUG - printk(KERN_DEBUG "tty_STAT_BHUP ttyI%d\n", info->line); -#endif - if (tty_port_active(&info->port)) { -#ifdef ISDN_DEBUG_MODEM_HUP - printk(KERN_DEBUG "Mhup in ISDN_STAT_BHUP\n"); -#endif - isdn_tty_modem_hup(info, 0); - return 1; - } - break; - case ISDN_STAT_NODCH: -#ifdef ISDN_TTY_STAT_DEBUG - printk(KERN_DEBUG "tty_STAT_NODCH ttyI%d\n", info->line); -#endif - if (tty_port_active(&info->port)) { - if (info->dialing) { - info->dialing = 0; - info->last_l2 = -1; - info->last_si = 0; - sprintf(info->last_cause, "0000"); - isdn_tty_modem_result(RESULT_NO_DIALTONE, info); - } - isdn_tty_modem_hup(info, 0); - return 1; - } - break; - case ISDN_STAT_UNLOAD: -#ifdef ISDN_TTY_STAT_DEBUG - printk(KERN_DEBUG "tty_STAT_UNLOAD ttyI%d\n", info->line); -#endif - for (i = 0; i < ISDN_MAX_CHANNELS; i++) { - info = &dev->mdm.info[i]; - if (info->isdn_driver == c->driver) { - if (info->online) - isdn_tty_modem_hup(info, 1); - } - } - return 1; -#ifdef CONFIG_ISDN_TTY_FAX - case ISDN_STAT_FAXIND: - if (tty_port_active(&info->port)) { - isdn_tty_fax_command(info, c); - } - break; -#endif -#ifdef CONFIG_ISDN_AUDIO - case ISDN_STAT_AUDIO: - if (tty_port_active(&info->port)) { - switch (c->parm.num[0]) { - case ISDN_AUDIO_DTMF: - if (info->vonline) { - isdn_audio_put_dle_code(info, - c->parm.num[1]); - } - break; - } - } - break; -#endif - } - } - return 0; -} - -/********************************************************************* - Modem-Emulator-Routines -*********************************************************************/ - -#define cmdchar(c) ((c >= ' ') && (c <= 0x7f)) - -/* - * Put a message from the AT-emulator into receive-buffer of tty, - * convert CR, LF, and BS to values in modem-registers 3, 4 and 5. - */ -void -isdn_tty_at_cout(char *msg, modem_info *info) -{ - struct tty_port *port = &info->port; - atemu *m = &info->emu; - char *p; - char c; - u_long flags; - struct sk_buff *skb = NULL; - char *sp = NULL; - int l; - - if (!msg) { - printk(KERN_WARNING "isdn_tty: Null-Message in isdn_tty_at_cout\n"); - return; - } - - l = strlen(msg); - - spin_lock_irqsave(&info->readlock, flags); - if (info->closing) { - spin_unlock_irqrestore(&info->readlock, flags); - return; - } - - /* use queue instead of direct, if online and */ - /* data is in queue or buffer is full */ - if (info->online && ((tty_buffer_request_room(port, l) < l) || - !skb_queue_empty(&dev->drv[info->isdn_driver]->rpqueue[info->isdn_channel]))) { - skb = alloc_skb(l, GFP_ATOMIC); - if (!skb) { - spin_unlock_irqrestore(&info->readlock, flags); - return; - } - sp = skb_put(skb, l); -#ifdef CONFIG_ISDN_AUDIO - ISDN_AUDIO_SKB_DLECOUNT(skb) = 0; - ISDN_AUDIO_SKB_LOCK(skb) = 0; -#endif - } - - for (p = msg; *p; p++) { - switch (*p) { - case '\r': - c = m->mdmreg[REG_CR]; - break; - case '\n': - c = m->mdmreg[REG_LF]; - break; - case '\b': - c = m->mdmreg[REG_BS]; - break; - default: - c = *p; - } - if (skb) { - *sp++ = c; - } else { - if (tty_insert_flip_char(port, c, TTY_NORMAL) == 0) - break; - } - } - if (skb) { - __skb_queue_tail(&dev->drv[info->isdn_driver]->rpqueue[info->isdn_channel], skb); - dev->drv[info->isdn_driver]->rcvcount[info->isdn_channel] += skb->len; - spin_unlock_irqrestore(&info->readlock, flags); - /* Schedule dequeuing */ - if (dev->modempoll && info->rcvsched) - isdn_timer_ctrl(ISDN_TIMER_MODEMREAD, 1); - - } else { - spin_unlock_irqrestore(&info->readlock, flags); - tty_flip_buffer_push(port); - } -} - -/* - * Perform ATH Hangup - */ -static void -isdn_tty_on_hook(modem_info *info) -{ - if (info->isdn_channel >= 0) { -#ifdef ISDN_DEBUG_MODEM_HUP - printk(KERN_DEBUG "Mhup in isdn_tty_on_hook\n"); -#endif - isdn_tty_modem_hup(info, 1); - } -} - -static void -isdn_tty_off_hook(void) -{ - printk(KERN_DEBUG "isdn_tty_off_hook\n"); -} - -#define PLUSWAIT1 (HZ / 2) /* 0.5 sec. */ -#define PLUSWAIT2 (HZ * 3 / 2) /* 1.5 sec */ - -/* - * Check Buffer for Modem-escape-sequence, activate timer-callback to - * isdn_tty_modem_escape() if sequence found. - * - * Parameters: - * p pointer to databuffer - * plus escape-character - * count length of buffer - * pluscount count of valid escape-characters so far - * lastplus timestamp of last character - */ -static void -isdn_tty_check_esc(const u_char *p, u_char plus, int count, int *pluscount, - u_long *lastplus) -{ - if (plus > 127) - return; - if (count > 3) { - p += count - 3; - count = 3; - *pluscount = 0; - } - while (count > 0) { - if (*(p++) == plus) { - if ((*pluscount)++) { - /* Time since last '+' > 0.5 sec. ? */ - if (time_after(jiffies, *lastplus + PLUSWAIT1)) - *pluscount = 1; - } else { - /* Time since last non-'+' < 1.5 sec. ? */ - if (time_before(jiffies, *lastplus + PLUSWAIT2)) - *pluscount = 0; - } - if ((*pluscount == 3) && (count == 1)) - isdn_timer_ctrl(ISDN_TIMER_MODEMPLUS, 1); - if (*pluscount > 3) - *pluscount = 1; - } else - *pluscount = 0; - *lastplus = jiffies; - count--; - } -} - -/* - * Return result of AT-emulator to tty-receive-buffer, depending on - * modem-register 12, bit 0 and 1. - * For CONNECT-messages also switch to online-mode. - * For RING-message handle auto-ATA if register 0 != 0 - */ - -static void -isdn_tty_modem_result(int code, modem_info *info) -{ - atemu *m = &info->emu; - static char *msg[] = - {"OK", "CONNECT", "RING", "NO CARRIER", "ERROR", - "CONNECT 64000", "NO DIALTONE", "BUSY", "NO ANSWER", - "RINGING", "NO MSN/EAZ", "VCON", "RUNG"}; - char s[ISDN_MSNLEN + 10]; - - switch (code) { - case RESULT_RING: - m->mdmreg[REG_RINGCNT]++; - if (m->mdmreg[REG_RINGCNT] == m->mdmreg[REG_RINGATA]) - /* Automatically accept incoming call */ - isdn_tty_cmd_ATA(info); - break; - case RESULT_NO_CARRIER: -#ifdef ISDN_DEBUG_MODEM_HUP - printk(KERN_DEBUG "modem_result: NO CARRIER %d %d\n", - info->closing, !info->port.tty); -#endif - m->mdmreg[REG_RINGCNT] = 0; - del_timer(&info->nc_timer); - info->ncarrier = 0; - if (info->closing || !info->port.tty) - return; - -#ifdef CONFIG_ISDN_AUDIO - if (info->vonline & 1) { -#ifdef ISDN_DEBUG_MODEM_VOICE - printk(KERN_DEBUG "res3: send DLE-ETX on ttyI%d\n", - info->line); -#endif - /* voice-recording, add DLE-ETX */ - isdn_tty_at_cout("\020\003", info); - } - if (info->vonline & 2) { -#ifdef ISDN_DEBUG_MODEM_VOICE - printk(KERN_DEBUG "res3: send DLE-DC4 on ttyI%d\n", - info->line); -#endif - /* voice-playing, add DLE-DC4 */ - isdn_tty_at_cout("\020\024", info); - } -#endif - break; - case RESULT_CONNECT: - case RESULT_CONNECT64000: - sprintf(info->last_cause, "0000"); - if (!info->online) - info->online = 2; - break; - case RESULT_VCON: -#ifdef ISDN_DEBUG_MODEM_VOICE - printk(KERN_DEBUG "res3: send VCON on ttyI%d\n", - info->line); -#endif - sprintf(info->last_cause, "0000"); - if (!info->online) - info->online = 1; - break; - } /* switch (code) */ - - if (m->mdmreg[REG_RESP] & BIT_RESP) { - /* Show results */ - if (m->mdmreg[REG_RESPNUM] & BIT_RESPNUM) { - /* Show numeric results only */ - sprintf(s, "\r\n%d\r\n", code); - isdn_tty_at_cout(s, info); - } else { - if (code == RESULT_RING) { - /* return if "show RUNG" and ringcounter>1 */ - if ((m->mdmreg[REG_RUNG] & BIT_RUNG) && - (m->mdmreg[REG_RINGCNT] > 1)) - return; - /* print CID, _before_ _every_ ring */ - if (!(m->mdmreg[REG_CIDONCE] & BIT_CIDONCE)) { - isdn_tty_at_cout("\r\nCALLER NUMBER: ", info); - isdn_tty_at_cout(dev->num[info->drv_index], info); - if (m->mdmreg[REG_CDN] & BIT_CDN) { - isdn_tty_at_cout("\r\nCALLED NUMBER: ", info); - isdn_tty_at_cout(info->emu.cpn, info); - } - } - } - isdn_tty_at_cout("\r\n", info); - isdn_tty_at_cout(msg[code], info); - switch (code) { - case RESULT_CONNECT: - switch (m->mdmreg[REG_L2PROT]) { - case ISDN_PROTO_L2_MODEM: - isdn_tty_at_cout(" ", info); - isdn_tty_at_cout(m->connmsg, info); - break; - } - break; - case RESULT_RING: - /* Append CPN, if enabled */ - if ((m->mdmreg[REG_CPN] & BIT_CPN)) { - sprintf(s, "/%s", m->cpn); - isdn_tty_at_cout(s, info); - } - /* Print CID only once, _after_ 1st RING */ - if ((m->mdmreg[REG_CIDONCE] & BIT_CIDONCE) && - (m->mdmreg[REG_RINGCNT] == 1)) { - isdn_tty_at_cout("\r\n", info); - isdn_tty_at_cout("CALLER NUMBER: ", info); - isdn_tty_at_cout(dev->num[info->drv_index], info); - if (m->mdmreg[REG_CDN] & BIT_CDN) { - isdn_tty_at_cout("\r\nCALLED NUMBER: ", info); - isdn_tty_at_cout(info->emu.cpn, info); - } - } - break; - case RESULT_NO_CARRIER: - case RESULT_NO_DIALTONE: - case RESULT_BUSY: - case RESULT_NO_ANSWER: - m->mdmreg[REG_RINGCNT] = 0; - /* Append Cause-Message if enabled */ - if (m->mdmreg[REG_RESPXT] & BIT_RESPXT) { - sprintf(s, "/%s", info->last_cause); - isdn_tty_at_cout(s, info); - } - break; - case RESULT_CONNECT64000: - /* Append Protocol to CONNECT message */ - switch (m->mdmreg[REG_L2PROT]) { - case ISDN_PROTO_L2_X75I: - case ISDN_PROTO_L2_X75UI: - case ISDN_PROTO_L2_X75BUI: - isdn_tty_at_cout("/X.75", info); - break; - case ISDN_PROTO_L2_HDLC: - isdn_tty_at_cout("/HDLC", info); - break; - case ISDN_PROTO_L2_V11096: - isdn_tty_at_cout("/V110/9600", info); - break; - case ISDN_PROTO_L2_V11019: - isdn_tty_at_cout("/V110/19200", info); - break; - case ISDN_PROTO_L2_V11038: - isdn_tty_at_cout("/V110/38400", info); - break; - } - if (m->mdmreg[REG_T70] & BIT_T70) { - isdn_tty_at_cout("/T.70", info); - if (m->mdmreg[REG_T70] & BIT_T70_EXT) - isdn_tty_at_cout("+", info); - } - break; - } - isdn_tty_at_cout("\r\n", info); - } - } - if (code == RESULT_NO_CARRIER) { - if (info->closing || (!info->port.tty)) - return; - - if (tty_port_check_carrier(&info->port)) - tty_hangup(info->port.tty); - } -} - - -/* - * Display a modem-register-value. - */ -static void -isdn_tty_show_profile(int ridx, modem_info *info) -{ - char v[6]; - - sprintf(v, "\r\n%d", info->emu.mdmreg[ridx]); - isdn_tty_at_cout(v, info); -} - -/* - * Get MSN-string from char-pointer, set pointer to end of number - */ -static void -isdn_tty_get_msnstr(char *n, char **p) -{ - int limit = ISDN_MSNLEN - 1; - - while (((*p[0] >= '0' && *p[0] <= '9') || - /* Why a comma ??? */ - (*p[0] == ',') || (*p[0] == ':')) && - (limit--)) - *n++ = *p[0]++; - *n = '\0'; -} - -/* - * Get phone-number from modem-commandbuffer - */ -static void -isdn_tty_getdial(char *p, char *q, int cnt) -{ - int first = 1; - int limit = ISDN_MSNLEN - 1; /* MUST match the size of interface var to avoid - buffer overflow */ - - while (strchr(" 0123456789,#.*WPTSR-", *p) && *p && --cnt > 0) { - if ((*p >= '0' && *p <= '9') || ((*p == 'S') && first) || - ((*p == 'R') && first) || - (*p == '*') || (*p == '#')) { - *q++ = *p; - limit--; - } - if (!limit) - break; - p++; - first = 0; - } - *q = 0; -} - -#define PARSE_ERROR { isdn_tty_modem_result(RESULT_ERROR, info); return; } -#define PARSE_ERROR1 { isdn_tty_modem_result(RESULT_ERROR, info); return 1; } - -static void -isdn_tty_report(modem_info *info) -{ - atemu *m = &info->emu; - char s[80]; - - isdn_tty_at_cout("\r\nStatistics of last connection:\r\n\r\n", info); - sprintf(s, " Remote Number: %s\r\n", info->last_num); - isdn_tty_at_cout(s, info); - sprintf(s, " Direction: %s\r\n", info->last_dir ? "outgoing" : "incoming"); - isdn_tty_at_cout(s, info); - isdn_tty_at_cout(" Layer-2 Protocol: ", info); - switch (info->last_l2) { - case ISDN_PROTO_L2_X75I: - isdn_tty_at_cout("X.75i", info); - break; - case ISDN_PROTO_L2_X75UI: - isdn_tty_at_cout("X.75ui", info); - break; - case ISDN_PROTO_L2_X75BUI: - isdn_tty_at_cout("X.75bui", info); - break; - case ISDN_PROTO_L2_HDLC: - isdn_tty_at_cout("HDLC", info); - break; - case ISDN_PROTO_L2_V11096: - isdn_tty_at_cout("V.110 9600 Baud", info); - break; - case ISDN_PROTO_L2_V11019: - isdn_tty_at_cout("V.110 19200 Baud", info); - break; - case ISDN_PROTO_L2_V11038: - isdn_tty_at_cout("V.110 38400 Baud", info); - break; - case ISDN_PROTO_L2_TRANS: - isdn_tty_at_cout("transparent", info); - break; - case ISDN_PROTO_L2_MODEM: - isdn_tty_at_cout("modem", info); - break; - case ISDN_PROTO_L2_FAX: - isdn_tty_at_cout("fax", info); - break; - default: - isdn_tty_at_cout("unknown", info); - break; - } - if (m->mdmreg[REG_T70] & BIT_T70) { - isdn_tty_at_cout("/T.70", info); - if (m->mdmreg[REG_T70] & BIT_T70_EXT) - isdn_tty_at_cout("+", info); - } - isdn_tty_at_cout("\r\n", info); - isdn_tty_at_cout(" Service: ", info); - switch (info->last_si) { - case 1: - isdn_tty_at_cout("audio\r\n", info); - break; - case 5: - isdn_tty_at_cout("btx\r\n", info); - break; - case 7: - isdn_tty_at_cout("data\r\n", info); - break; - default: - sprintf(s, "%d\r\n", info->last_si); - isdn_tty_at_cout(s, info); - break; - } - sprintf(s, " Hangup location: %s\r\n", info->last_lhup ? "local" : "remote"); - isdn_tty_at_cout(s, info); - sprintf(s, " Last cause: %s\r\n", info->last_cause); - isdn_tty_at_cout(s, info); -} - -/* - * Parse AT&.. commands. - */ -static int -isdn_tty_cmd_ATand(char **p, modem_info *info) -{ - atemu *m = &info->emu; - int i; - char rb[100]; - -#define MAXRB (sizeof(rb) - 1) - - switch (*p[0]) { - case 'B': - /* &B - Set Buffersize */ - p[0]++; - i = isdn_getnum(p); - if ((i < 0) || (i > ISDN_SERIAL_XMIT_MAX)) - PARSE_ERROR1; -#ifdef CONFIG_ISDN_AUDIO - if ((m->mdmreg[REG_SI1] & 1) && (i > VBUF)) - PARSE_ERROR1; -#endif - m->mdmreg[REG_PSIZE] = i / 16; - info->xmit_size = m->mdmreg[REG_PSIZE] * 16; - switch (m->mdmreg[REG_L2PROT]) { - case ISDN_PROTO_L2_V11096: - case ISDN_PROTO_L2_V11019: - case ISDN_PROTO_L2_V11038: - info->xmit_size /= 10; - } - break; - case 'C': - /* &C - DCD Status */ - p[0]++; - switch (isdn_getnum(p)) { - case 0: - m->mdmreg[REG_DCD] &= ~BIT_DCD; - break; - case 1: - m->mdmreg[REG_DCD] |= BIT_DCD; - break; - default: - PARSE_ERROR1 - } - break; - case 'D': - /* &D - Set DTR-Low-behavior */ - p[0]++; - switch (isdn_getnum(p)) { - case 0: - m->mdmreg[REG_DTRHUP] &= ~BIT_DTRHUP; - m->mdmreg[REG_DTRR] &= ~BIT_DTRR; - break; - case 2: - m->mdmreg[REG_DTRHUP] |= BIT_DTRHUP; - m->mdmreg[REG_DTRR] &= ~BIT_DTRR; - break; - case 3: - m->mdmreg[REG_DTRHUP] |= BIT_DTRHUP; - m->mdmreg[REG_DTRR] |= BIT_DTRR; - break; - default: - PARSE_ERROR1 - } - break; - case 'E': - /* &E -Set EAZ/MSN */ - p[0]++; - isdn_tty_get_msnstr(m->msn, p); - break; - case 'F': - /* &F -Set Factory-Defaults */ - p[0]++; - if (info->msr & UART_MSR_DCD) - PARSE_ERROR1; - isdn_tty_reset_profile(m); - isdn_tty_modem_reset_regs(info, 1); - break; -#ifdef DUMMY_HAYES_AT - case 'K': - /* only for be compilant with common scripts */ - /* &K Flowcontrol - no function */ - p[0]++; - isdn_getnum(p); - break; -#endif - case 'L': - /* &L -Set Numbers to listen on */ - p[0]++; - i = 0; - while (*p[0] && (strchr("0123456789,-*[]?;", *p[0])) && - (i < ISDN_LMSNLEN - 1)) - m->lmsn[i++] = *p[0]++; - m->lmsn[i] = '\0'; - break; - case 'R': - /* &R - Set V.110 bitrate adaption */ - p[0]++; - i = isdn_getnum(p); - switch (i) { - case 0: - /* Switch off V.110, back to X.75 */ - m->mdmreg[REG_L2PROT] = ISDN_PROTO_L2_X75I; - m->mdmreg[REG_SI2] = 0; - info->xmit_size = m->mdmreg[REG_PSIZE] * 16; - break; - case 9600: - m->mdmreg[REG_L2PROT] = ISDN_PROTO_L2_V11096; - m->mdmreg[REG_SI2] = 197; - info->xmit_size = m->mdmreg[REG_PSIZE] * 16 / 10; - break; - case 19200: - m->mdmreg[REG_L2PROT] = ISDN_PROTO_L2_V11019; - m->mdmreg[REG_SI2] = 199; - info->xmit_size = m->mdmreg[REG_PSIZE] * 16 / 10; - break; - case 38400: - m->mdmreg[REG_L2PROT] = ISDN_PROTO_L2_V11038; - m->mdmreg[REG_SI2] = 198; /* no existing standard for this */ - info->xmit_size = m->mdmreg[REG_PSIZE] * 16 / 10; - break; - default: - PARSE_ERROR1; - } - /* Switch off T.70 */ - m->mdmreg[REG_T70] &= ~(BIT_T70 | BIT_T70_EXT); - /* Set Service 7 */ - m->mdmreg[REG_SI1] |= 4; - break; - case 'S': - /* &S - Set Windowsize */ - p[0]++; - i = isdn_getnum(p); - if ((i > 0) && (i < 9)) - m->mdmreg[REG_WSIZE] = i; - else - PARSE_ERROR1; - break; - case 'V': - /* &V - Show registers */ - p[0]++; - isdn_tty_at_cout("\r\n", info); - for (i = 0; i < ISDN_MODEM_NUMREG; i++) { - sprintf(rb, "S%02d=%03d%s", i, - m->mdmreg[i], ((i + 1) % 10) ? " " : "\r\n"); - isdn_tty_at_cout(rb, info); - } - sprintf(rb, "\r\nEAZ/MSN: %.50s\r\n", - strlen(m->msn) ? m->msn : "None"); - isdn_tty_at_cout(rb, info); - if (strlen(m->lmsn)) { - isdn_tty_at_cout("\r\nListen: ", info); - isdn_tty_at_cout(m->lmsn, info); - isdn_tty_at_cout("\r\n", info); - } - break; - case 'W': - /* &W - Write Profile */ - p[0]++; - switch (*p[0]) { - case '0': - p[0]++; - modem_write_profile(m); - break; - default: - PARSE_ERROR1; - } - break; - case 'X': - /* &X - Switch to BTX-Mode and T.70 */ - p[0]++; - switch (isdn_getnum(p)) { - case 0: - m->mdmreg[REG_T70] &= ~(BIT_T70 | BIT_T70_EXT); - info->xmit_size = m->mdmreg[REG_PSIZE] * 16; - break; - case 1: - m->mdmreg[REG_T70] |= BIT_T70; - m->mdmreg[REG_T70] &= ~BIT_T70_EXT; - m->mdmreg[REG_L2PROT] = ISDN_PROTO_L2_X75I; - info->xmit_size = 112; - m->mdmreg[REG_SI1] = 4; - m->mdmreg[REG_SI2] = 0; - break; - case 2: - m->mdmreg[REG_T70] |= (BIT_T70 | BIT_T70_EXT); - m->mdmreg[REG_L2PROT] = ISDN_PROTO_L2_X75I; - info->xmit_size = 112; - m->mdmreg[REG_SI1] = 4; - m->mdmreg[REG_SI2] = 0; - break; - default: - PARSE_ERROR1; - } - break; - default: - PARSE_ERROR1; - } - return 0; -} - -static int -isdn_tty_check_ats(int mreg, int mval, modem_info *info, atemu *m) -{ - /* Some plausibility checks */ - switch (mreg) { - case REG_L2PROT: - if (mval > ISDN_PROTO_L2_MAX) - return 1; - break; - case REG_PSIZE: - if ((mval * 16) > ISDN_SERIAL_XMIT_MAX) - return 1; -#ifdef CONFIG_ISDN_AUDIO - if ((m->mdmreg[REG_SI1] & 1) && (mval > VBUFX)) - return 1; -#endif - info->xmit_size = mval * 16; - switch (m->mdmreg[REG_L2PROT]) { - case ISDN_PROTO_L2_V11096: - case ISDN_PROTO_L2_V11019: - case ISDN_PROTO_L2_V11038: - info->xmit_size /= 10; - } - break; - case REG_SI1I: - case REG_PLAN: - case REG_SCREEN: - /* readonly registers */ - return 1; - } - return 0; -} - -/* - * Perform ATS command - */ -static int -isdn_tty_cmd_ATS(char **p, modem_info *info) -{ - atemu *m = &info->emu; - int bitpos; - int mreg; - int mval; - int bval; - - mreg = isdn_getnum(p); - if (mreg < 0 || mreg >= ISDN_MODEM_NUMREG) - PARSE_ERROR1; - switch (*p[0]) { - case '=': - p[0]++; - mval = isdn_getnum(p); - if (mval < 0 || mval > 255) - PARSE_ERROR1; - if (isdn_tty_check_ats(mreg, mval, info, m)) - PARSE_ERROR1; - m->mdmreg[mreg] = mval; - break; - case '.': - /* Set/Clear a single bit */ - p[0]++; - bitpos = isdn_getnum(p); - if ((bitpos < 0) || (bitpos > 7)) - PARSE_ERROR1; - switch (*p[0]) { - case '=': - p[0]++; - bval = isdn_getnum(p); - if (bval < 0 || bval > 1) - PARSE_ERROR1; - if (bval) - mval = m->mdmreg[mreg] | (1 << bitpos); - else - mval = m->mdmreg[mreg] & ~(1 << bitpos); - if (isdn_tty_check_ats(mreg, mval, info, m)) - PARSE_ERROR1; - m->mdmreg[mreg] = mval; - break; - case '?': - p[0]++; - isdn_tty_at_cout("\r\n", info); - isdn_tty_at_cout((m->mdmreg[mreg] & (1 << bitpos)) ? "1" : "0", - info); - break; - default: - PARSE_ERROR1; - } - break; - case '?': - p[0]++; - isdn_tty_show_profile(mreg, info); - break; - default: - PARSE_ERROR1; - break; - } - return 0; -} - -/* - * Perform ATA command - */ -static void -isdn_tty_cmd_ATA(modem_info *info) -{ - atemu *m = &info->emu; - isdn_ctrl cmd; - int l2; - - if (info->msr & UART_MSR_RI) { - /* Accept incoming call */ - info->last_dir = 0; - strcpy(info->last_num, dev->num[info->drv_index]); - m->mdmreg[REG_RINGCNT] = 0; - info->msr &= ~UART_MSR_RI; - l2 = m->mdmreg[REG_L2PROT]; -#ifdef CONFIG_ISDN_AUDIO - /* If more than one bit set in reg18, autoselect Layer2 */ - if ((m->mdmreg[REG_SI1] & m->mdmreg[REG_SI1I]) != m->mdmreg[REG_SI1]) { - if (m->mdmreg[REG_SI1I] == 1) { - if ((l2 != ISDN_PROTO_L2_MODEM) && (l2 != ISDN_PROTO_L2_FAX)) - l2 = ISDN_PROTO_L2_TRANS; - } else - l2 = ISDN_PROTO_L2_X75I; - } -#endif - cmd.driver = info->isdn_driver; - cmd.command = ISDN_CMD_SETL2; - cmd.arg = info->isdn_channel + (l2 << 8); - info->last_l2 = l2; - isdn_command(&cmd); - cmd.driver = info->isdn_driver; - cmd.command = ISDN_CMD_SETL3; - cmd.arg = info->isdn_channel + (m->mdmreg[REG_L3PROT] << 8); -#ifdef CONFIG_ISDN_TTY_FAX - if (l2 == ISDN_PROTO_L2_FAX) { - cmd.parm.fax = info->fax; - info->fax->direction = ISDN_TTY_FAX_CONN_IN; - } -#endif - isdn_command(&cmd); - cmd.driver = info->isdn_driver; - cmd.arg = info->isdn_channel; - cmd.command = ISDN_CMD_ACCEPTD; - info->dialing = 16; - info->emu.carrierwait = 0; - isdn_command(&cmd); - isdn_timer_ctrl(ISDN_TIMER_CARRIER, 1); - } else - isdn_tty_modem_result(RESULT_NO_ANSWER, info); -} - -#ifdef CONFIG_ISDN_AUDIO -/* - * Parse AT+F.. commands - */ -static int -isdn_tty_cmd_PLUSF(char **p, modem_info *info) -{ - atemu *m = &info->emu; - char rs[20]; - - if (!strncmp(p[0], "CLASS", 5)) { - p[0] += 5; - switch (*p[0]) { - case '?': - p[0]++; - sprintf(rs, "\r\n%d", - (m->mdmreg[REG_SI1] & 1) ? 8 : 0); -#ifdef CONFIG_ISDN_TTY_FAX - if (TTY_IS_FCLASS2(info)) - sprintf(rs, "\r\n2"); - else if (TTY_IS_FCLASS1(info)) - sprintf(rs, "\r\n1"); -#endif - isdn_tty_at_cout(rs, info); - break; - case '=': - p[0]++; - switch (*p[0]) { - case '0': - p[0]++; - m->mdmreg[REG_L2PROT] = ISDN_PROTO_L2_X75I; - m->mdmreg[REG_L3PROT] = ISDN_PROTO_L3_TRANS; - m->mdmreg[REG_SI1] = 4; - info->xmit_size = - m->mdmreg[REG_PSIZE] * 16; - break; -#ifdef CONFIG_ISDN_TTY_FAX - case '1': - p[0]++; - if (!(dev->global_features & - ISDN_FEATURE_L3_FCLASS1)) - PARSE_ERROR1; - m->mdmreg[REG_SI1] = 1; - m->mdmreg[REG_L2PROT] = ISDN_PROTO_L2_FAX; - m->mdmreg[REG_L3PROT] = ISDN_PROTO_L3_FCLASS1; - info->xmit_size = - m->mdmreg[REG_PSIZE] * 16; - break; - case '2': - p[0]++; - if (!(dev->global_features & - ISDN_FEATURE_L3_FCLASS2)) - PARSE_ERROR1; - m->mdmreg[REG_SI1] = 1; - m->mdmreg[REG_L2PROT] = ISDN_PROTO_L2_FAX; - m->mdmreg[REG_L3PROT] = ISDN_PROTO_L3_FCLASS2; - info->xmit_size = - m->mdmreg[REG_PSIZE] * 16; - break; -#endif - case '8': - p[0]++; - /* L2 will change on dialout with si=1 */ - m->mdmreg[REG_L2PROT] = ISDN_PROTO_L2_X75I; - m->mdmreg[REG_L3PROT] = ISDN_PROTO_L3_TRANS; - m->mdmreg[REG_SI1] = 5; - info->xmit_size = VBUF; - break; - case '?': - p[0]++; - strcpy(rs, "\r\n0,"); -#ifdef CONFIG_ISDN_TTY_FAX - if (dev->global_features & - ISDN_FEATURE_L3_FCLASS1) - strcat(rs, "1,"); - if (dev->global_features & - ISDN_FEATURE_L3_FCLASS2) - strcat(rs, "2,"); -#endif - strcat(rs, "8"); - isdn_tty_at_cout(rs, info); - break; - default: - PARSE_ERROR1; - } - break; - default: - PARSE_ERROR1; - } - return 0; - } -#ifdef CONFIG_ISDN_TTY_FAX - return (isdn_tty_cmd_PLUSF_FAX(p, info)); -#else - PARSE_ERROR1; -#endif -} - -/* - * Parse AT+V.. commands - */ -static int -isdn_tty_cmd_PLUSV(char **p, modem_info *info) -{ - atemu *m = &info->emu; - isdn_ctrl cmd; - static char *vcmd[] = - {"NH", "IP", "LS", "RX", "SD", "SM", "TX", "DD", NULL}; - int i; - int par1; - int par2; - char rs[20]; - - i = 0; - while (vcmd[i]) { - if (!strncmp(vcmd[i], p[0], 2)) { - p[0] += 2; - break; - } - i++; - } - switch (i) { - case 0: - /* AT+VNH - Auto hangup feature */ - switch (*p[0]) { - case '?': - p[0]++; - isdn_tty_at_cout("\r\n1", info); - break; - case '=': - p[0]++; - switch (*p[0]) { - case '1': - p[0]++; - break; - case '?': - p[0]++; - isdn_tty_at_cout("\r\n1", info); - break; - default: - PARSE_ERROR1; - } - break; - default: - PARSE_ERROR1; - } - break; - case 1: - /* AT+VIP - Reset all voice parameters */ - isdn_tty_modem_reset_vpar(m); - break; - case 2: - /* AT+VLS - Select device, accept incoming call */ - switch (*p[0]) { - case '?': - p[0]++; - sprintf(rs, "\r\n%d", m->vpar[0]); - isdn_tty_at_cout(rs, info); - break; - case '=': - p[0]++; - switch (*p[0]) { - case '0': - p[0]++; - m->vpar[0] = 0; - break; - case '2': - p[0]++; - m->vpar[0] = 2; - break; - case '?': - p[0]++; - isdn_tty_at_cout("\r\n0,2", info); - break; - default: - PARSE_ERROR1; - } - break; - default: - PARSE_ERROR1; - } - break; - case 3: - /* AT+VRX - Start recording */ - if (!m->vpar[0]) - PARSE_ERROR1; - if (info->online != 1) { - isdn_tty_modem_result(RESULT_NO_ANSWER, info); - return 1; - } - info->dtmf_state = isdn_audio_dtmf_init(info->dtmf_state); - if (!info->dtmf_state) { - printk(KERN_WARNING "isdn_tty: Couldn't malloc dtmf state\n"); - PARSE_ERROR1; - } - info->silence_state = isdn_audio_silence_init(info->silence_state); - if (!info->silence_state) { - printk(KERN_WARNING "isdn_tty: Couldn't malloc silence state\n"); - PARSE_ERROR1; - } - if (m->vpar[3] < 5) { - info->adpcmr = isdn_audio_adpcm_init(info->adpcmr, m->vpar[3]); - if (!info->adpcmr) { - printk(KERN_WARNING "isdn_tty: Couldn't malloc adpcm state\n"); - PARSE_ERROR1; - } - } -#ifdef ISDN_DEBUG_AT - printk(KERN_DEBUG "AT: +VRX\n"); -#endif - info->vonline |= 1; - isdn_tty_modem_result(RESULT_CONNECT, info); - return 0; - break; - case 4: - /* AT+VSD - Silence detection */ - switch (*p[0]) { - case '?': - p[0]++; - sprintf(rs, "\r\n<%d>,<%d>", - m->vpar[1], - m->vpar[2]); - isdn_tty_at_cout(rs, info); - break; - case '=': - p[0]++; - if ((*p[0] >= '0') && (*p[0] <= '9')) { - par1 = isdn_getnum(p); - if ((par1 < 0) || (par1 > 31)) - PARSE_ERROR1; - if (*p[0] != ',') - PARSE_ERROR1; - p[0]++; - par2 = isdn_getnum(p); - if ((par2 < 0) || (par2 > 255)) - PARSE_ERROR1; - m->vpar[1] = par1; - m->vpar[2] = par2; - break; - } else - if (*p[0] == '?') { - p[0]++; - isdn_tty_at_cout("\r\n<0-31>,<0-255>", - info); - break; - } else - PARSE_ERROR1; - break; - default: - PARSE_ERROR1; - } - break; - case 5: - /* AT+VSM - Select compression */ - switch (*p[0]) { - case '?': - p[0]++; - sprintf(rs, "\r\n<%d>,<%d><8000>", - m->vpar[3], - m->vpar[1]); - isdn_tty_at_cout(rs, info); - break; - case '=': - p[0]++; - switch (*p[0]) { - case '2': - case '3': - case '4': - case '5': - case '6': - par1 = isdn_getnum(p); - if ((par1 < 2) || (par1 > 6)) - PARSE_ERROR1; - m->vpar[3] = par1; - break; - case '?': - p[0]++; - isdn_tty_at_cout("\r\n2;ADPCM;2;0;(8000)\r\n", - info); - isdn_tty_at_cout("3;ADPCM;3;0;(8000)\r\n", - info); - isdn_tty_at_cout("4;ADPCM;4;0;(8000)\r\n", - info); - isdn_tty_at_cout("5;ALAW;8;0;(8000)\r\n", - info); - isdn_tty_at_cout("6;ULAW;8;0;(8000)\r\n", - info); - break; - default: - PARSE_ERROR1; - } - break; - default: - PARSE_ERROR1; - } - break; - case 6: - /* AT+VTX - Start sending */ - if (!m->vpar[0]) - PARSE_ERROR1; - if (info->online != 1) { - isdn_tty_modem_result(RESULT_NO_ANSWER, info); - return 1; - } - info->dtmf_state = isdn_audio_dtmf_init(info->dtmf_state); - if (!info->dtmf_state) { - printk(KERN_WARNING "isdn_tty: Couldn't malloc dtmf state\n"); - PARSE_ERROR1; - } - if (m->vpar[3] < 5) { - info->adpcms = isdn_audio_adpcm_init(info->adpcms, m->vpar[3]); - if (!info->adpcms) { - printk(KERN_WARNING "isdn_tty: Couldn't malloc adpcm state\n"); - PARSE_ERROR1; - } - } -#ifdef ISDN_DEBUG_AT - printk(KERN_DEBUG "AT: +VTX\n"); -#endif - m->lastDLE = 0; - info->vonline |= 2; - isdn_tty_modem_result(RESULT_CONNECT, info); - return 0; - break; - case 7: - /* AT+VDD - DTMF detection */ - switch (*p[0]) { - case '?': - p[0]++; - sprintf(rs, "\r\n<%d>,<%d>", - m->vpar[4], - m->vpar[5]); - isdn_tty_at_cout(rs, info); - break; - case '=': - p[0]++; - if ((*p[0] >= '0') && (*p[0] <= '9')) { - if (info->online != 1) - PARSE_ERROR1; - par1 = isdn_getnum(p); - if ((par1 < 0) || (par1 > 15)) - PARSE_ERROR1; - if (*p[0] != ',') - PARSE_ERROR1; - p[0]++; - par2 = isdn_getnum(p); - if ((par2 < 0) || (par2 > 255)) - PARSE_ERROR1; - m->vpar[4] = par1; - m->vpar[5] = par2; - cmd.driver = info->isdn_driver; - cmd.command = ISDN_CMD_AUDIO; - cmd.arg = info->isdn_channel + (ISDN_AUDIO_SETDD << 8); - cmd.parm.num[0] = par1; - cmd.parm.num[1] = par2; - isdn_command(&cmd); - break; - } else - if (*p[0] == '?') { - p[0]++; - isdn_tty_at_cout("\r\n<0-15>,<0-255>", - info); - break; - } else - PARSE_ERROR1; - break; - default: - PARSE_ERROR1; - } - break; - default: - PARSE_ERROR1; - } - return 0; -} -#endif /* CONFIG_ISDN_AUDIO */ - -/* - * Parse and perform an AT-command-line. - */ -static void -isdn_tty_parse_at(modem_info *info) -{ - atemu *m = &info->emu; - char *p; - char ds[ISDN_MSNLEN]; - -#ifdef ISDN_DEBUG_AT - printk(KERN_DEBUG "AT: '%s'\n", m->mdmcmd); -#endif - for (p = &m->mdmcmd[2]; *p;) { - switch (*p) { - case ' ': - p++; - break; - case 'A': - /* A - Accept incoming call */ - p++; - isdn_tty_cmd_ATA(info); - return; - case 'D': - /* D - Dial */ - if (info->msr & UART_MSR_DCD) - PARSE_ERROR; - if (info->msr & UART_MSR_RI) { - isdn_tty_modem_result(RESULT_NO_CARRIER, info); - return; - } - isdn_tty_getdial(++p, ds, sizeof ds); - p += strlen(p); - if (!strlen(m->msn)) - isdn_tty_modem_result(RESULT_NO_MSN_EAZ, info); - else if (strlen(ds)) - isdn_tty_dial(ds, info, m); - else - PARSE_ERROR; - return; - case 'E': - /* E - Turn Echo on/off */ - p++; - switch (isdn_getnum(&p)) { - case 0: - m->mdmreg[REG_ECHO] &= ~BIT_ECHO; - break; - case 1: - m->mdmreg[REG_ECHO] |= BIT_ECHO; - break; - default: - PARSE_ERROR; - } - break; - case 'H': - /* H - On/Off-hook */ - p++; - switch (*p) { - case '0': - p++; - isdn_tty_on_hook(info); - break; - case '1': - p++; - isdn_tty_off_hook(); - break; - default: - isdn_tty_on_hook(info); - break; - } - break; - case 'I': - /* I - Information */ - p++; - isdn_tty_at_cout("\r\nLinux ISDN", info); - switch (*p) { - case '0': - case '1': - p++; - break; - case '2': - p++; - isdn_tty_report(info); - break; - case '3': - p++; - snprintf(ds, sizeof(ds), "\r\n%d", info->emu.charge); - isdn_tty_at_cout(ds, info); - break; - default:; - } - break; -#ifdef DUMMY_HAYES_AT - case 'L': - case 'M': - /* only for be compilant with common scripts */ - /* no function */ - p++; - isdn_getnum(&p); - break; -#endif - case 'O': - /* O - Go online */ - p++; - if (info->msr & UART_MSR_DCD) - /* if B-Channel is up */ - isdn_tty_modem_result((m->mdmreg[REG_L2PROT] == ISDN_PROTO_L2_MODEM) ? RESULT_CONNECT : RESULT_CONNECT64000, info); - else - isdn_tty_modem_result(RESULT_NO_CARRIER, info); - return; - case 'Q': - /* Q - Turn Emulator messages on/off */ - p++; - switch (isdn_getnum(&p)) { - case 0: - m->mdmreg[REG_RESP] |= BIT_RESP; - break; - case 1: - m->mdmreg[REG_RESP] &= ~BIT_RESP; - break; - default: - PARSE_ERROR; - } - break; - case 'S': - /* S - Set/Get Register */ - p++; - if (isdn_tty_cmd_ATS(&p, info)) - return; - break; - case 'V': - /* V - Numeric or ASCII Emulator-messages */ - p++; - switch (isdn_getnum(&p)) { - case 0: - m->mdmreg[REG_RESP] |= BIT_RESPNUM; - break; - case 1: - m->mdmreg[REG_RESP] &= ~BIT_RESPNUM; - break; - default: - PARSE_ERROR; - } - break; - case 'Z': - /* Z - Load Registers from Profile */ - p++; - if (info->msr & UART_MSR_DCD) { - info->online = 0; - isdn_tty_on_hook(info); - } - isdn_tty_modem_reset_regs(info, 1); - break; - case '+': - p++; - switch (*p) { -#ifdef CONFIG_ISDN_AUDIO - case 'F': - p++; - if (isdn_tty_cmd_PLUSF(&p, info)) - return; - break; - case 'V': - if ((!(m->mdmreg[REG_SI1] & 1)) || - (m->mdmreg[REG_L2PROT] == ISDN_PROTO_L2_MODEM)) - PARSE_ERROR; - p++; - if (isdn_tty_cmd_PLUSV(&p, info)) - return; - break; -#endif /* CONFIG_ISDN_AUDIO */ - case 'S': /* SUSPEND */ - p++; - isdn_tty_get_msnstr(ds, &p); - isdn_tty_suspend(ds, info, m); - break; - case 'R': /* RESUME */ - p++; - isdn_tty_get_msnstr(ds, &p); - isdn_tty_resume(ds, info, m); - break; - case 'M': /* MESSAGE */ - p++; - isdn_tty_send_msg(info, m, p); - break; - default: - PARSE_ERROR; - } - break; - case '&': - p++; - if (isdn_tty_cmd_ATand(&p, info)) - return; - break; - default: - PARSE_ERROR; - } - } -#ifdef CONFIG_ISDN_AUDIO - if (!info->vonline) -#endif - isdn_tty_modem_result(RESULT_OK, info); -} - -/* Need own toupper() because standard-toupper is not available - * within modules. - */ -#define my_toupper(c) (((c >= 'a') && (c <= 'z')) ? (c & 0xdf) : c) - -/* - * Perform line-editing of AT-commands - * - * Parameters: - * p inputbuffer - * count length of buffer - * channel index to line (minor-device) - */ -static int -isdn_tty_edit_at(const char *p, int count, modem_info *info) -{ - atemu *m = &info->emu; - int total = 0; - u_char c; - char eb[2]; - int cnt; - - for (cnt = count; cnt > 0; p++, cnt--) { - c = *p; - total++; - if (c == m->mdmreg[REG_CR] || c == m->mdmreg[REG_LF]) { - /* Separator (CR or LF) */ - m->mdmcmd[m->mdmcmdl] = 0; - if (m->mdmreg[REG_ECHO] & BIT_ECHO) { - eb[0] = c; - eb[1] = 0; - isdn_tty_at_cout(eb, info); - } - if ((m->mdmcmdl >= 2) && (!(strncmp(m->mdmcmd, "AT", 2)))) - isdn_tty_parse_at(info); - m->mdmcmdl = 0; - continue; - } - if (c == m->mdmreg[REG_BS] && m->mdmreg[REG_BS] < 128) { - /* Backspace-Function */ - if ((m->mdmcmdl > 2) || (!m->mdmcmdl)) { - if (m->mdmcmdl) - m->mdmcmdl--; - if (m->mdmreg[REG_ECHO] & BIT_ECHO) - isdn_tty_at_cout("\b", info); - } - continue; - } - if (cmdchar(c)) { - if (m->mdmreg[REG_ECHO] & BIT_ECHO) { - eb[0] = c; - eb[1] = 0; - isdn_tty_at_cout(eb, info); - } - if (m->mdmcmdl < 255) { - c = my_toupper(c); - switch (m->mdmcmdl) { - case 1: - if (c == 'T') { - m->mdmcmd[m->mdmcmdl] = c; - m->mdmcmd[++m->mdmcmdl] = 0; - break; - } else - m->mdmcmdl = 0; - /* Fall through - check for 'A' */ - case 0: - if (c == 'A') { - m->mdmcmd[m->mdmcmdl] = c; - m->mdmcmd[++m->mdmcmdl] = 0; - } - break; - default: - m->mdmcmd[m->mdmcmdl] = c; - m->mdmcmd[++m->mdmcmdl] = 0; - } - } - } - } - return total; -} - -/* - * Switch all modem-channels who are online and got a valid - * escape-sequence 1.5 seconds ago, to command-mode. - * This function is called every second via timer-interrupt from within - * timer-dispatcher isdn_timer_function() - */ -void -isdn_tty_modem_escape(void) -{ - int ton = 0; - int i; - int midx; - - for (i = 0; i < ISDN_MAX_CHANNELS; i++) - if (USG_MODEM(dev->usage[i]) && (midx = dev->m_idx[i]) >= 0) { - modem_info *info = &dev->mdm.info[midx]; - if (info->online) { - ton = 1; - if ((info->emu.pluscount == 3) && - time_after(jiffies, - info->emu.lastplus + PLUSWAIT2)) { - info->emu.pluscount = 0; - info->online = 0; - isdn_tty_modem_result(RESULT_OK, info); - } - } - } - isdn_timer_ctrl(ISDN_TIMER_MODEMPLUS, ton); -} - -/* - * Put a RING-message to all modem-channels who have the RI-bit set. - * This function is called every second via timer-interrupt from within - * timer-dispatcher isdn_timer_function() - */ -void -isdn_tty_modem_ring(void) -{ - int ton = 0; - int i; - - for (i = 0; i < ISDN_MAX_CHANNELS; i++) { - modem_info *info = &dev->mdm.info[i]; - if (info->msr & UART_MSR_RI) { - ton = 1; - isdn_tty_modem_result(RESULT_RING, info); - } - } - isdn_timer_ctrl(ISDN_TIMER_MODEMRING, ton); -} - -/* - * For all online tty's, try sending data to - * the lower levels. - */ -void -isdn_tty_modem_xmit(void) -{ - int ton = 1; - int i; - - for (i = 0; i < ISDN_MAX_CHANNELS; i++) { - modem_info *info = &dev->mdm.info[i]; - if (info->online) { - ton = 1; - isdn_tty_senddown(info); - isdn_tty_tint(info); - } - } - isdn_timer_ctrl(ISDN_TIMER_MODEMXMIT, ton); -} - -/* - * Check all channels if we have a 'no carrier' timeout. - * Timeout value is set by Register S7. - */ -void -isdn_tty_carrier_timeout(void) -{ - int ton = 0; - int i; - - for (i = 0; i < ISDN_MAX_CHANNELS; i++) { - modem_info *info = &dev->mdm.info[i]; - if (!info->dialing) - continue; - if (info->emu.carrierwait++ > info->emu.mdmreg[REG_WAITC]) { - info->dialing = 0; - isdn_tty_modem_result(RESULT_NO_CARRIER, info); - isdn_tty_modem_hup(info, 1); - } else - ton = 1; - } - isdn_timer_ctrl(ISDN_TIMER_CARRIER, ton); -} |
