diff options
Diffstat (limited to 'drivers/input/rmi4/rmi_f54.c')
| -rw-r--r-- | drivers/input/rmi4/rmi_f54.c | 55 |
1 files changed, 32 insertions, 23 deletions
diff --git a/drivers/input/rmi4/rmi_f54.c b/drivers/input/rmi4/rmi_f54.c index 710b02595486..6b23e679606e 100644 --- a/drivers/input/rmi4/rmi_f54.c +++ b/drivers/input/rmi4/rmi_f54.c @@ -24,6 +24,12 @@ #define F54_NUM_TX_OFFSET 1 #define F54_NUM_RX_OFFSET 0 +/* + * The smbus protocol can read only 32 bytes max at a time. + * But this should be fine for i2c/spi as well. + */ +#define F54_REPORT_DATA_SIZE 32 + /* F54 commands */ #define F54_GET_REPORT 1 #define F54_FORCE_CAL 2 @@ -81,11 +87,6 @@ static const char * const rmi_f54_report_type_names[] = { = "Full Raw Capacitance RX Offset Removed", }; -struct rmi_f54_reports { - int start; - int size; -}; - struct f54_data { struct rmi_function *fn; @@ -98,7 +99,6 @@ struct f54_data { enum rmi_f54_report_type report_type; u8 *report_data; int report_size; - struct rmi_f54_reports standard_report[2]; bool is_busy; struct mutex status_mutex; @@ -116,6 +116,7 @@ struct f54_data { struct video_device vdev; struct vb2_queue queue; struct mutex lock; + u32 sequence; int input; enum rmi_f54_report_type inputs[F54_MAX_REPORT_TYPE]; }; @@ -290,6 +291,7 @@ static int rmi_f54_queue_setup(struct vb2_queue *q, unsigned int *nbuffers, static void rmi_f54_buffer_queue(struct vb2_buffer *vb) { + struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb); struct f54_data *f54 = vb2_get_drv_priv(vb->vb2_queue); u16 *ptr; enum vb2_buffer_state state; @@ -298,6 +300,7 @@ static void rmi_f54_buffer_queue(struct vb2_buffer *vb) mutex_lock(&f54->status_mutex); + vb2_set_plane_payload(vb, 0, 0); reptype = rmi_f54_get_reptype(f54, f54->input); if (reptype == F54_REPORT_NONE) { state = VB2_BUF_STATE_ERROR; @@ -344,14 +347,25 @@ static void rmi_f54_buffer_queue(struct vb2_buffer *vb) data_done: mutex_unlock(&f54->data_mutex); done: + vb->timestamp = ktime_get_ns(); + vbuf->field = V4L2_FIELD_NONE; + vbuf->sequence = f54->sequence++; vb2_buffer_done(vb, state); mutex_unlock(&f54->status_mutex); } +static void rmi_f54_stop_streaming(struct vb2_queue *q) +{ + struct f54_data *f54 = vb2_get_drv_priv(q); + + f54->sequence = 0; +} + /* V4L2 structures */ static const struct vb2_ops rmi_f54_queue_ops = { .queue_setup = rmi_f54_queue_setup, .buf_queue = rmi_f54_buffer_queue, + .stop_streaming = rmi_f54_stop_streaming, .wait_prepare = vb2_ops_wait_prepare, .wait_finish = vb2_ops_wait_finish, }; @@ -359,11 +373,10 @@ static const struct vb2_ops rmi_f54_queue_ops = { static const struct vb2_queue rmi_f54_queue = { .type = V4L2_BUF_TYPE_VIDEO_CAPTURE, .io_modes = VB2_MMAP | VB2_USERPTR | VB2_DMABUF | VB2_READ, - .buf_struct_size = sizeof(struct vb2_buffer), + .buf_struct_size = sizeof(struct vb2_v4l2_buffer), .ops = &rmi_f54_queue_ops, .mem_ops = &vb2_vmalloc_memops, .timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC, - .min_buffers_needed = 1, }; static int rmi_f54_vidioc_querycap(struct file *file, void *priv, @@ -516,13 +529,11 @@ static void rmi_f54_work(struct work_struct *work) struct f54_data *f54 = container_of(work, struct f54_data, work.work); struct rmi_function *fn = f54->fn; u8 fifo[2]; - struct rmi_f54_reports *report; int report_size; u8 command; - u8 *data; int error; + int i; - data = f54->report_data; report_size = rmi_f54_get_report_size(f54); if (report_size == 0) { dev_err(&fn->dev, "Bad report size, report type=%d\n", @@ -530,8 +541,6 @@ static void rmi_f54_work(struct work_struct *work) error = -EINVAL; goto error; /* retry won't help */ } - f54->standard_report[0].size = report_size; - report = f54->standard_report; mutex_lock(&f54->data_mutex); @@ -556,10 +565,11 @@ static void rmi_f54_work(struct work_struct *work) rmi_dbg(RMI_DEBUG_FN, &fn->dev, "Get report command completed, reading data\n"); - report_size = 0; - for (; report->size; report++) { - fifo[0] = report->start & 0xff; - fifo[1] = (report->start >> 8) & 0xff; + for (i = 0; i < report_size; i += F54_REPORT_DATA_SIZE) { + int size = min(F54_REPORT_DATA_SIZE, report_size - i); + + fifo[0] = i & 0xff; + fifo[1] = i >> 8; error = rmi_write_block(fn->rmi_dev, fn->fd.data_base_addr + F54_FIFO_OFFSET, fifo, sizeof(fifo)); @@ -569,15 +579,13 @@ static void rmi_f54_work(struct work_struct *work) } error = rmi_read_block(fn->rmi_dev, fn->fd.data_base_addr + - F54_REPORT_DATA_OFFSET, data, - report->size); + F54_REPORT_DATA_OFFSET, + f54->report_data + i, size); if (error) { dev_err(&fn->dev, "%s: read [%d bytes] returned %d\n", - __func__, report->size, error); + __func__, size, error); goto abort; } - data += report->size; - report_size += report->size; } abort: @@ -601,7 +609,7 @@ static int rmi_f54_config(struct rmi_function *fn) { struct rmi_driver *drv = fn->rmi_dev->driver; - drv->set_irq_bits(fn->rmi_dev, fn->irq_mask); + drv->clear_irq_bits(fn->rmi_dev, fn->irq_mask); return 0; } @@ -730,6 +738,7 @@ static void rmi_f54_remove(struct rmi_function *fn) video_unregister_device(&f54->vdev); v4l2_device_unregister(&f54->v4l2); + destroy_workqueue(f54->workqueue); } struct rmi_function_handler rmi_f54_handler = { |
