diff options
Diffstat (limited to 'drivers/gpu/drm/nouveau/dispnv04/crtc.c')
| -rw-r--r-- | drivers/gpu/drm/nouveau/dispnv04/crtc.c | 38 |
1 files changed, 19 insertions, 19 deletions
diff --git a/drivers/gpu/drm/nouveau/dispnv04/crtc.c b/drivers/gpu/drm/nouveau/dispnv04/crtc.c index eb86f69d244a..ab7b69c11d40 100644 --- a/drivers/gpu/drm/nouveau/dispnv04/crtc.c +++ b/drivers/gpu/drm/nouveau/dispnv04/crtc.c @@ -113,8 +113,8 @@ static void nv_crtc_calc_state_ext(struct drm_crtc *crtc, struct drm_display_mod { struct drm_device *dev = crtc->dev; struct nouveau_drm *drm = nouveau_drm(dev); - struct nvkm_bios *bios = nvxx_bios(&drm->device); - struct nvkm_clk *clk = nvxx_clk(&drm->device); + struct nvkm_bios *bios = nvxx_bios(&drm->client.device); + struct nvkm_clk *clk = nvxx_clk(&drm->client.device); struct nouveau_crtc *nv_crtc = nouveau_crtc(crtc); struct nv04_mode_state *state = &nv04_display(dev)->mode_reg; struct nv04_crtc_reg *regp = &state->crtc_reg[nv_crtc->index]; @@ -138,7 +138,7 @@ static void nv_crtc_calc_state_ext(struct drm_crtc *crtc, struct drm_display_mod * has yet been observed in allowing the use a single stage pll on all * nv43 however. the behaviour of single stage use is untested on nv40 */ - if (drm->device.info.chipset > 0x40 && dot_clock <= (pll_lim.vco1.max_freq / 2)) + if (drm->client.device.info.chipset > 0x40 && dot_clock <= (pll_lim.vco1.max_freq / 2)) memset(&pll_lim.vco2, 0, sizeof(pll_lim.vco2)); @@ -148,10 +148,10 @@ static void nv_crtc_calc_state_ext(struct drm_crtc *crtc, struct drm_display_mod state->pllsel &= PLLSEL_VPLL1_MASK | PLLSEL_VPLL2_MASK | PLLSEL_TV_MASK; /* The blob uses this always, so let's do the same */ - if (drm->device.info.family == NV_DEVICE_INFO_V0_CURIE) + if (drm->client.device.info.family == NV_DEVICE_INFO_V0_CURIE) state->pllsel |= NV_PRAMDAC_PLL_COEFF_SELECT_USE_VPLL2_TRUE; /* again nv40 and some nv43 act more like nv3x as described above */ - if (drm->device.info.chipset < 0x41) + if (drm->client.device.info.chipset < 0x41) state->pllsel |= NV_PRAMDAC_PLL_COEFF_SELECT_SOURCE_PROG_MPLL | NV_PRAMDAC_PLL_COEFF_SELECT_SOURCE_PROG_NVPLL; state->pllsel |= nv_crtc->index ? PLLSEL_VPLL2_MASK : PLLSEL_VPLL1_MASK; @@ -270,7 +270,7 @@ nv_crtc_mode_set_vga(struct drm_crtc *crtc, struct drm_display_mode *mode) horizEnd = horizTotal - 2; horizBlankEnd = horizTotal + 4; #if 0 - if (dev->overlayAdaptor && drm->device.info.family >= NV_DEVICE_INFO_V0_CELSIUS) + if (dev->overlayAdaptor && drm->client.device.info.family >= NV_DEVICE_INFO_V0_CELSIUS) /* This reportedly works around some video overlay bandwidth problems */ horizTotal += 2; #endif @@ -505,7 +505,7 @@ nv_crtc_mode_set_regs(struct drm_crtc *crtc, struct drm_display_mode * mode) regp->cursor_cfg = NV_PCRTC_CURSOR_CONFIG_CUR_LINES_64 | NV_PCRTC_CURSOR_CONFIG_CUR_PIXELS_64 | NV_PCRTC_CURSOR_CONFIG_ADDRESS_SPACE_PNVM; - if (drm->device.info.chipset >= 0x11) + if (drm->client.device.info.chipset >= 0x11) regp->cursor_cfg |= NV_PCRTC_CURSOR_CONFIG_CUR_BPP_32; if (mode->flags & DRM_MODE_FLAG_DBLSCAN) regp->cursor_cfg |= NV_PCRTC_CURSOR_CONFIG_DOUBLE_SCAN_ENABLE; @@ -546,26 +546,26 @@ nv_crtc_mode_set_regs(struct drm_crtc *crtc, struct drm_display_mode * mode) * 1 << 30 on 0x60.830), for no apparent reason */ regp->CRTC[NV_CIO_CRE_59] = off_chip_digital; - if (drm->device.info.family >= NV_DEVICE_INFO_V0_RANKINE) + if (drm->client.device.info.family >= NV_DEVICE_INFO_V0_RANKINE) regp->CRTC[0x9f] = off_chip_digital ? 0x11 : 0x1; regp->crtc_830 = mode->crtc_vdisplay - 3; regp->crtc_834 = mode->crtc_vdisplay - 1; - if (drm->device.info.family == NV_DEVICE_INFO_V0_CURIE) + if (drm->client.device.info.family == NV_DEVICE_INFO_V0_CURIE) /* This is what the blob does */ regp->crtc_850 = NVReadCRTC(dev, 0, NV_PCRTC_850); - if (drm->device.info.family >= NV_DEVICE_INFO_V0_RANKINE) + if (drm->client.device.info.family >= NV_DEVICE_INFO_V0_RANKINE) regp->gpio_ext = NVReadCRTC(dev, 0, NV_PCRTC_GPIO_EXT); - if (drm->device.info.family >= NV_DEVICE_INFO_V0_CELSIUS) + if (drm->client.device.info.family >= NV_DEVICE_INFO_V0_CELSIUS) regp->crtc_cfg = NV10_PCRTC_CONFIG_START_ADDRESS_HSYNC; else regp->crtc_cfg = NV04_PCRTC_CONFIG_START_ADDRESS_HSYNC; /* Some misc regs */ - if (drm->device.info.family == NV_DEVICE_INFO_V0_CURIE) { + if (drm->client.device.info.family == NV_DEVICE_INFO_V0_CURIE) { regp->CRTC[NV_CIO_CRE_85] = 0xFF; regp->CRTC[NV_CIO_CRE_86] = 0x1; } @@ -577,7 +577,7 @@ nv_crtc_mode_set_regs(struct drm_crtc *crtc, struct drm_display_mode * mode) /* Generic PRAMDAC regs */ - if (drm->device.info.family >= NV_DEVICE_INFO_V0_CELSIUS) + if (drm->client.device.info.family >= NV_DEVICE_INFO_V0_CELSIUS) /* Only bit that bios and blob set. */ regp->nv10_cursync = (1 << 25); @@ -586,7 +586,7 @@ nv_crtc_mode_set_regs(struct drm_crtc *crtc, struct drm_display_mode * mode) NV_PRAMDAC_GENERAL_CONTROL_PIXMIX_ON; if (fb->format->depth == 16) regp->ramdac_gen_ctrl |= NV_PRAMDAC_GENERAL_CONTROL_ALT_MODE_SEL; - if (drm->device.info.chipset >= 0x11) + if (drm->client.device.info.chipset >= 0x11) regp->ramdac_gen_ctrl |= NV_PRAMDAC_GENERAL_CONTROL_PIPE_LONG; regp->ramdac_630 = 0; /* turn off green mode (tv test pattern?) */ @@ -649,7 +649,7 @@ nv_crtc_mode_set(struct drm_crtc *crtc, struct drm_display_mode *mode, nv_crtc_mode_set_vga(crtc, adjusted_mode); /* calculated in nv04_dfp_prepare, nv40 needs it written before calculating PLLs */ - if (drm->device.info.family == NV_DEVICE_INFO_V0_CURIE) + if (drm->client.device.info.family == NV_DEVICE_INFO_V0_CURIE) NVWriteRAMDAC(dev, 0, NV_PRAMDAC_SEL_CLK, nv04_display(dev)->mode_reg.sel_clk); nv_crtc_mode_set_regs(crtc, adjusted_mode); nv_crtc_calc_state_ext(crtc, mode, adjusted_mode->clock); @@ -710,7 +710,7 @@ static void nv_crtc_prepare(struct drm_crtc *crtc) /* Some more preparation. */ NVWriteCRTC(dev, nv_crtc->index, NV_PCRTC_CONFIG, NV_PCRTC_CONFIG_START_ADDRESS_NON_VGA); - if (drm->device.info.family == NV_DEVICE_INFO_V0_CURIE) { + if (drm->client.device.info.family == NV_DEVICE_INFO_V0_CURIE) { uint32_t reg900 = NVReadRAMDAC(dev, nv_crtc->index, NV_PRAMDAC_900); NVWriteRAMDAC(dev, nv_crtc->index, NV_PRAMDAC_900, reg900 & ~0x10000); } @@ -886,7 +886,7 @@ nv04_crtc_do_mode_set_base(struct drm_crtc *crtc, crtc_wr_cio_state(crtc, regp, NV_CIO_CRE_FF_INDEX); crtc_wr_cio_state(crtc, regp, NV_CIO_CRE_FFLWM__INDEX); - if (drm->device.info.family >= NV_DEVICE_INFO_V0_KELVIN) { + if (drm->client.device.info.family >= NV_DEVICE_INFO_V0_KELVIN) { regp->CRTC[NV_CIO_CRE_47] = arb_lwm >> 8; crtc_wr_cio_state(crtc, regp, NV_CIO_CRE_47); } @@ -967,7 +967,7 @@ static void nv11_cursor_upload(struct drm_device *dev, struct nouveau_bo *src, { struct nouveau_drm *drm = nouveau_drm(dev); - if (drm->device.info.chipset == 0x11) { + if (drm->client.device.info.chipset == 0x11) { pixel = ((pixel & 0x000000ff) << 24) | ((pixel & 0x0000ff00) << 8) | ((pixel & 0x00ff0000) >> 8) | @@ -1008,7 +1008,7 @@ nv04_crtc_cursor_set(struct drm_crtc *crtc, struct drm_file *file_priv, if (ret) goto out; - if (drm->device.info.chipset >= 0x11) + if (drm->client.device.info.chipset >= 0x11) nv11_cursor_upload(dev, cursor, nv_crtc->cursor.nvbo); else nv04_cursor_upload(dev, cursor, nv_crtc->cursor.nvbo); |
