diff options
Diffstat (limited to 'drivers/gpio/Kconfig')
| -rw-r--r-- | drivers/gpio/Kconfig | 96 |
1 files changed, 83 insertions, 13 deletions
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index bb13c266c329..b8013cf90064 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -120,6 +120,14 @@ config GPIO_ASPEED help Say Y here to support Aspeed AST2400 and AST2500 GPIO controllers. +config GPIO_ASPEED_SGPIO + bool "Aspeed SGPIO support" + depends on (ARCH_ASPEED || COMPILE_TEST) && OF_GPIO + select GPIO_GENERIC + select GPIOLIB_IRQCHIP + help + Say Y here to support Aspeed AST2500 SGPIO functionality. + config GPIO_ATH79 tristate "Atheros AR71XX/AR724X/AR913X GPIO support" default y if ATH79 @@ -147,6 +155,15 @@ config GPIO_BCM_KONA help Turn on GPIO support for Broadcom "Kona" chips. +config GPIO_BCM_XGS_IPROC + tristate "BRCM XGS iProc GPIO support" + depends on OF_GPIO && (ARCH_BCM_IPROC || COMPILE_TEST) + select GPIO_GENERIC + select GPIOLIB_IRQCHIP + default ARCH_BCM_IPROC + help + Say yes here to enable GPIO support for Broadcom XGS iProc SoCs. + config GPIO_BRCMSTB tristate "BRCMSTB GPIO support" default y if (ARCH_BRCMSTB || BMIPS_GENERIC) @@ -275,7 +292,7 @@ config GPIO_ICH config GPIO_IOP tristate "Intel IOP GPIO" - depends on ARCH_IOP32X || ARCH_IOP33X || COMPILE_TEST + depends on ARCH_IOP32X || COMPILE_TEST select GPIO_GENERIC help Say yes here to support the GPIO functionality of a number of Intel @@ -288,17 +305,23 @@ config GPIO_IXP4XX depends on ARM # For <asm/mach-types.h> depends on ARCH_IXP4XX select GPIO_GENERIC - select IRQ_DOMAIN + select GPIOLIB_IRQCHIP select IRQ_DOMAIN_HIERARCHY help Say yes here to support the GPIO functionality of a number of Intel IXP4xx series of chips. If unsure, say N. +config GPIO_LOGICVC + tristate "Xylon LogiCVC GPIO support" + depends on MFD_SYSCON && OF + help + Say yes here to support GPIO functionality of the Xylon LogiCVC + programmable logic block. config GPIO_LOONGSON bool "Loongson-2/3 GPIO support" - depends on CPU_LOONGSON2 || CPU_LOONGSON3 + depends on CPU_LOONGSON2EF || CPU_LOONGSON64 help driver for GPIO functionality on Loongson-2F/3A/3B processors. @@ -311,13 +334,12 @@ config GPIO_LPC18XX Select this option to enable GPIO driver for NXP LPC18XX/43XX devices. -config GPIO_LYNXPOINT - tristate "Intel Lynxpoint GPIO support" - depends on ACPI && X86 - select GPIOLIB_IRQCHIP +config GPIO_LPC32XX + tristate "NXP LPC32XX GPIO support" + depends on OF_GPIO && (ARCH_LPC32XX || COMPILE_TEST) help - driver for GPIO functionality on Intel Lynxpoint PCH chipset - Requires ACPI device enumeration code to set up a platform device. + Select this option to enable GPIO driver for + NXP LPC32XX devices. config GPIO_MB86S7X tristate "GPIO support for Fujitsu MB86S7x Platforms" @@ -428,6 +450,15 @@ config GPIO_RCAR help Say yes here to support GPIO on Renesas R-Car SoCs. +config GPIO_RDA + bool "RDA Micro GPIO controller support" + depends on ARCH_RDA || COMPILE_TEST + depends on OF_GPIO + select GPIO_GENERIC + select GPIOLIB_IRQCHIP + help + Say Y here to support RDA Micro GPIO controller. + config GPIO_REG bool help @@ -446,6 +477,15 @@ config GPIO_SAMA5D2_PIOBU The difference from regular GPIOs is that they maintain their value during backup/self-refresh. +config GPIO_SIFIVE + bool "SiFive GPIO support" + depends on OF_GPIO && IRQ_DOMAIN_HIERARCHY + select GPIO_GENERIC + select GPIOLIB_IRQCHIP + select REGMAP_MMIO + help + Say yes here to support the GPIO device on SiFive SoCs. + config GPIO_SIOX tristate "SIOX GPIO support" depends on SIOX @@ -520,10 +560,11 @@ config GPIO_TEGRA config GPIO_TEGRA186 tristate "NVIDIA Tegra186 GPIO support" - default ARCH_TEGRA_186_SOC - depends on ARCH_TEGRA_186_SOC || COMPILE_TEST + default ARCH_TEGRA_186_SOC || ARCH_TEGRA_194_SOC + depends on ARCH_TEGRA_186_SOC || ARCH_TEGRA_194_SOC || COMPILE_TEST depends on OF_GPIO select GPIOLIB_IRQCHIP + select IRQ_DOMAIN_HIERARCHY help Say yes here to support GPIO pins on NVIDIA Tegra186 SoCs. @@ -539,6 +580,7 @@ config GPIO_THUNDERX tristate "Cavium ThunderX/OCTEON-TX GPIO" depends on ARCH_THUNDER || (64BIT && COMPILE_TEST) depends on PCI_MSI + select GPIOLIB_IRQCHIP select IRQ_DOMAIN_HIERARCHY select IRQ_FASTEOI_HIERARCHY_HANDLERS help @@ -578,6 +620,13 @@ config GPIO_VX855 additional drivers must be enabled in order to use the functionality of the device. +config GPIO_WCD934X + tristate "Qualcomm Technologies Inc WCD9340/WCD9341 gpio controller driver" + depends on MFD_WCD934X && OF_GPIO + help + This driver is to supprot GPIO block found on the Qualcomm Technologies + Inc WCD9340/WCD9341 Audio Codec. + config GPIO_XGENE bool "APM X-Gene GPIO controller support" depends on ARM64 && OF_GPIO @@ -986,6 +1035,18 @@ config GPIO_BD70528 This driver can also be built as a module. If so, the module will be called gpio-bd70528. +config GPIO_BD71828 + tristate "ROHM BD71828 GPIO support" + depends on MFD_ROHM_BD71828 + help + Support for GPIOs on ROHM BD71828 PMIC. There are three GPIOs + available on the ROHM PMIC in total. The GPIOs are limited to + outputs only and pins must be configured to GPIO outputs by + OTP. Enable this only if you want to use these pins as outputs. + + This driver can also be built as a module. If so, the module + will be called gpio-bd71828. + config GPIO_BD9571MWV tristate "ROHM BD9571 GPIO support" depends on MFD_BD9571MWV @@ -1113,6 +1174,7 @@ config GPIO_MADERA config GPIO_MAX77620 tristate "GPIO support for PMIC MAX77620 and MAX20024" depends on MFD_MAX77620 + select GPIOLIB_IRQCHIP help GPIO driver for MAX77620 and MAX20024 PMIC from Maxim Semiconductor. MAX77620 PMIC has 8 pins that can be configured as GPIOs. The @@ -1312,7 +1374,7 @@ config GPIO_BT8XX The card needs to be physically altered for using it as a GPIO card. For more information on how to build a GPIO card from a BT8xx TV card, see the documentation file at - Documentation/driver-api/bt8xxgpio.rst + Documentation/driver-api/gpio/bt8xxgpio.rst If unsure, say N. @@ -1445,6 +1507,15 @@ config GPIO_XRA1403 help GPIO driver for EXAR XRA1403 16-bit SPI-based GPIO expander. +config GPIO_MOXTET + tristate "Turris Mox Moxtet bus GPIO expander" + depends on MOXTET + help + Say yes here if you are building for the Turris Mox router. + This is the driver needed for configuring the GPIOs via the Moxtet + bus. For example the Mox module with SFP cage needs this driver + so that phylink can use corresponding GPIOs. + endmenu menu "USB GPIO expanders" @@ -1465,7 +1536,6 @@ endmenu config GPIO_MOCKUP tristate "GPIO Testing Driver" - depends on GPIOLIB select IRQ_SIM help This enables GPIO Testing driver, which provides a way to test GPIO |
