1 files changed, 119 insertions, 27 deletions

diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index 60078a67d7e3..88c657b057e2 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -23,7 +23,7 @@
 #include <linux/bootmem.h>
 #include <linux/ftrace.h>
 #include <linux/ioport.h>
-#include <linux/module.h>
+#include <linux/export.h>
 #include <linux/syscore_ops.h>
 #include <linux/delay.h>
 #include <linux/timex.h>
@@ -64,6 +64,8 @@ unsigned disabled_cpus;
 unsigned int boot_cpu_physical_apicid = -1U;
 EXPORT_SYMBOL_GPL(boot_cpu_physical_apicid);
 
+u8 boot_cpu_apic_version;
+
 /*
  * The highest APIC ID seen during enumeration.
  */
@@ -92,8 +94,10 @@ static int apic_extnmi = APIC_EXTNMI_BSP;
  */
 DEFINE_EARLY_PER_CPU_READ_MOSTLY(u16, x86_cpu_to_apicid, BAD_APICID);
 DEFINE_EARLY_PER_CPU_READ_MOSTLY(u16, x86_bios_cpu_apicid, BAD_APICID);
+DEFINE_EARLY_PER_CPU_READ_MOSTLY(u32, x86_cpu_to_acpiid, U32_MAX);
 EXPORT_EARLY_PER_CPU_SYMBOL(x86_cpu_to_apicid);
 EXPORT_EARLY_PER_CPU_SYMBOL(x86_bios_cpu_apicid);
+EXPORT_EARLY_PER_CPU_SYMBOL(x86_cpu_to_acpiid);
 
 #ifdef CONFIG_X86_32
 
@@ -145,7 +149,7 @@ static int force_enable_local_apic __initdata;
  */
 static int __init parse_lapic(char *arg)
 {
-	if (config_enabled(CONFIG_X86_32) && !arg)
+	if (IS_ENABLED(CONFIG_X86_32) && !arg)
 		force_enable_local_apic = 1;
 	else if (arg && !strncmp(arg, "notscdeadline", 13))
 		setup_clear_cpu_cap(X86_FEATURE_TSC_DEADLINE_TIMER);
@@ -311,7 +315,7 @@ int lapic_get_maxlvt(void)
 
 /* Clock divisor */
 #define APIC_DIVISOR 16
-#define TSC_DIVISOR  32
+#define TSC_DIVISOR  8
 
 /*
  * This function sets up the local APIC timer, with a timeout of
@@ -563,13 +567,37 @@ static void setup_APIC_timer(void)
 				    CLOCK_EVT_FEAT_DUMMY);
 		levt->set_next_event = lapic_next_deadline;
 		clockevents_config_and_register(levt,
-						(tsc_khz / TSC_DIVISOR) * 1000,
+						tsc_khz * (1000 / TSC_DIVISOR),
 						0xF, ~0UL);
 	} else
 		clockevents_register_device(levt);
 }
 
 /*
+ * Install the updated TSC frequency from recalibration at the TSC
+ * deadline clockevent devices.
+ */
+static void __lapic_update_tsc_freq(void *info)
+{
+	struct clock_event_device *levt = this_cpu_ptr(&lapic_events);
+
+	if (!this_cpu_has(X86_FEATURE_TSC_DEADLINE_TIMER))
+		return;
+
+	clockevents_update_freq(levt, tsc_khz * (1000 / TSC_DIVISOR));
+}
+
+void lapic_update_tsc_freq(void)
+{
+	/*
+	 * The clockevent device's ->mult and ->shift can both be
+	 * changed. In order to avoid races, schedule the frequency
+	 * update code on each CPU.
+	 */
+	on_each_cpu(__lapic_update_tsc_freq, NULL, 0);
+}
+
+/*
  * In this functions we calibrate APIC bus clocks to the external timer.
  *
  * We want to do the calibration only once since we want to have local timer
@@ -1348,7 +1376,6 @@ void setup_local_APIC(void)
 	 * Actually disabling the focus CPU check just makes the hang less
 	 * frequent as it makes the interrupt distributon model be more
 	 * like LRU than MRU (the short-term load is more even across CPUs).
-	 * See also the comment in end_level_ioapic_irq().  --macro
 	 */
 
 	/*
@@ -1597,6 +1624,9 @@ void __init enable_IR_x2apic(void)
 	unsigned long flags;
 	int ret, ir_stat;
 
+	if (skip_ioapic_setup)
+		return;
+
 	ir_stat = irq_remapping_prepare();
 	if (ir_stat < 0 && !x2apic_supported())
 		return;
@@ -1787,8 +1817,7 @@ void __init init_apic_mappings(void)
 		 * since smp_sanity_check is prepared for such a case
 		 * and disable smp mode
 		 */
-		apic_version[new_apicid] =
-			 GET_APIC_VERSION(apic_read(APIC_LVR));
+		boot_cpu_apic_version = GET_APIC_VERSION(apic_read(APIC_LVR));
 	}
 }
 
@@ -1799,17 +1828,14 @@ void __init register_lapic_address(unsigned long address)
 	if (!x2apic_mode) {
 		set_fixmap_nocache(FIX_APIC_BASE, address);
 		apic_printk(APIC_VERBOSE, "mapped APIC to %16lx (%16lx)\n",
-			    APIC_BASE, mp_lapic_addr);
+			    APIC_BASE, address);
 	}
 	if (boot_cpu_physical_apicid == -1U) {
 		boot_cpu_physical_apicid  = read_apic_id();
-		apic_version[boot_cpu_physical_apicid] =
-			 GET_APIC_VERSION(apic_read(APIC_LVR));
+		boot_cpu_apic_version = GET_APIC_VERSION(apic_read(APIC_LVR));
 	}
 }
 
-int apic_version[MAX_LOCAL_APIC];
-
 /*
  * Local APIC interrupts
  */
@@ -1998,7 +2024,53 @@ void disconnect_bsp_APIC(int virt_wire_setup)
 	apic_write(APIC_LVT1, value);
 }
 
-int generic_processor_info(int apicid, int version)
+/*
+ * The number of allocated logical CPU IDs. Since logical CPU IDs are allocated
+ * contiguously, it equals to current allocated max logical CPU ID plus 1.
+ * All allocated CPU ID should be in [0, nr_logical_cpuidi), so the maximum of
+ * nr_logical_cpuids is nr_cpu_ids.
+ *
+ * NOTE: Reserve 0 for BSP.
+ */
+static int nr_logical_cpuids = 1;
+
+/*
+ * Used to store mapping between logical CPU IDs and APIC IDs.
+ */
+static int cpuid_to_apicid[] = {
+	[0 ... NR_CPUS - 1] = -1,
+};
+
+/*
+ * Should use this API to allocate logical CPU IDs to keep nr_logical_cpuids
+ * and cpuid_to_apicid[] synchronized.
+ */
+static int allocate_logical_cpuid(int apicid)
+{
+	int i;
+
+	/*
+	 * cpuid <-> apicid mapping is persistent, so when a cpu is up,
+	 * check if the kernel has allocated a cpuid for it.
+	 */
+	for (i = 0; i < nr_logical_cpuids; i++) {
+		if (cpuid_to_apicid[i] == apicid)
+			return i;
+	}
+
+	/* Allocate a new cpuid. */
+	if (nr_logical_cpuids >= nr_cpu_ids) {
+		WARN_ONCE(1, "Only %d processors supported."
+			     "Processor %d/0x%x and the rest are ignored.\n",
+			     nr_cpu_ids - 1, nr_logical_cpuids, apicid);
+		return -1;
+	}
+
+	cpuid_to_apicid[nr_logical_cpuids] = apicid;
+	return nr_logical_cpuids++;
+}
+
+int __generic_processor_info(int apicid, int version, bool enabled)
 {
 	int cpu, max = nr_cpu_ids;
 	bool boot_cpu_detected = physid_isset(boot_cpu_physical_apicid,
@@ -2045,7 +2117,7 @@ int generic_processor_info(int apicid, int version)
 		int thiscpu = max + disabled_cpus - 1;
 
 		pr_warning(
-			"ACPI: NR_CPUS/possible_cpus limit of %i almost"
+			"APIC: NR_CPUS/possible_cpus limit of %i almost"
 			" reached. Keeping one slot for boot cpu."
 			"  Processor %d/0x%x ignored.\n", max, thiscpu, apicid);
 
@@ -2056,15 +2128,16 @@ int generic_processor_info(int apicid, int version)
 	if (num_processors >= nr_cpu_ids) {
 		int thiscpu = max + disabled_cpus;
 
-		pr_warning(
-			"ACPI: NR_CPUS/possible_cpus limit of %i reached."
-			"  Processor %d/0x%x ignored.\n", max, thiscpu, apicid);
+		if (enabled) {
+			pr_warning("APIC: NR_CPUS/possible_cpus limit of %i "
+				   "reached. Processor %d/0x%x ignored.\n",
+				   max, thiscpu, apicid);
+		}
 
 		disabled_cpus++;
 		return -EINVAL;
 	}
 
-	num_processors++;
 	if (apicid == boot_cpu_physical_apicid) {
 		/*
 		 * x86_bios_cpu_apicid is required to have processors listed
@@ -2074,8 +2147,16 @@ int generic_processor_info(int apicid, int version)
 		 * for BSP.
 		 */
 		cpu = 0;
-	} else
-		cpu = cpumask_next_zero(-1, cpu_present_mask);
+
+		/* Logical cpuid 0 is reserved for BSP. */
+		cpuid_to_apicid[0] = apicid;
+	} else {
+		cpu = allocate_logical_cpuid(apicid);
+		if (cpu < 0) {
+			disabled_cpus++;
+			return -EINVAL;
+		}
+	}
 
 	/*
 	 * This can happen on physical hotplug. The sanity check at boot time
@@ -2085,8 +2166,9 @@ int generic_processor_info(int apicid, int version)
 	if (topology_update_package_map(apicid, cpu) < 0) {
 		int thiscpu = max + disabled_cpus;
 
-		pr_warning("ACPI: Package limit reached. Processor %d/0x%x ignored.\n",
+		pr_warning("APIC: Package limit reached. Processor %d/0x%x ignored.\n",
 			   thiscpu, apicid);
+
 		disabled_cpus++;
 		return -ENOSPC;
 	}
@@ -2099,14 +2181,12 @@ int generic_processor_info(int apicid, int version)
 			   cpu, apicid);
 		version = 0x10;
 	}
-	apic_version[apicid] = version;
 
-	if (version != apic_version[boot_cpu_physical_apicid]) {
+	if (version != boot_cpu_apic_version) {
 		pr_warning("BIOS bug: APIC version mismatch, boot CPU: %x, CPU %d: version %x\n",
-			apic_version[boot_cpu_physical_apicid], cpu, version);
+			boot_cpu_apic_version, cpu, version);
 	}
 
-	physid_set(apicid, phys_cpu_present_map);
 	if (apicid > max_physical_apicid)
 		max_physical_apicid = apicid;
 
@@ -2119,11 +2199,23 @@ int generic_processor_info(int apicid, int version)
 		apic->x86_32_early_logical_apicid(cpu);
 #endif
 	set_cpu_possible(cpu, true);
-	set_cpu_present(cpu, true);
+
+	if (enabled) {
+		num_processors++;
+		physid_set(apicid, phys_cpu_present_map);
+		set_cpu_present(cpu, true);
+	} else {
+		disabled_cpus++;
+	}
 
 	return cpu;
 }
 
+int generic_processor_info(int apicid, int version)
+{
+	return __generic_processor_info(apicid, version, true);
+}
+
 int hard_smp_processor_id(void)
 {
 	return read_apic_id();
@@ -2246,7 +2338,7 @@ int __init APIC_init_uniprocessor(void)
 	 * Complain if the BIOS pretends there is one.
 	 */
 	if (!boot_cpu_has(X86_FEATURE_APIC) &&
-	    APIC_INTEGRATED(apic_version[boot_cpu_physical_apicid])) {
+	    APIC_INTEGRATED(boot_cpu_apic_version)) {
 		pr_err("BIOS bug, local APIC 0x%x not detected!...\n",
 			boot_cpu_physical_apicid);
 		return -1;