diff options
Diffstat (limited to 'arch/powerpc/mm/mem.c')
-rw-r--r-- | arch/powerpc/mm/mem.c | 284 |
1 files changed, 206 insertions, 78 deletions
diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c index 9191a66b3bc5..ef7b1119b2e2 100644 --- a/arch/powerpc/mm/mem.c +++ b/arch/powerpc/mm/mem.c @@ -31,6 +31,7 @@ #include <linux/slab.h> #include <linux/vmalloc.h> #include <linux/memremap.h> +#include <linux/dma-direct.h> #include <asm/pgalloc.h> #include <asm/prom.h> @@ -48,6 +49,7 @@ #include <asm/fixmap.h> #include <asm/swiotlb.h> #include <asm/rtas.h> +#include <asm/kasan.h> #include <mm/mmu_decl.h> @@ -104,6 +106,27 @@ int __weak remove_section_mapping(unsigned long start, unsigned long end) return -ENODEV; } +#define FLUSH_CHUNK_SIZE SZ_1G +/** + * flush_dcache_range_chunked(): Write any modified data cache blocks out to + * memory and invalidate them, in chunks of up to FLUSH_CHUNK_SIZE + * Does not invalidate the corresponding instruction cache blocks. + * + * @start: the start address + * @stop: the stop address (exclusive) + * @chunk: the max size of the chunks + */ +static void flush_dcache_range_chunked(unsigned long start, unsigned long stop, + unsigned long chunk) +{ + unsigned long i; + + for (i = start; i < stop; i += chunk) { + flush_dcache_range(i, min(stop, i + chunk)); + cond_resched(); + } +} + int __ref arch_add_memory(int nid, u64 start, u64 size, struct mhp_restrictions *restrictions) { @@ -120,7 +143,6 @@ int __ref arch_add_memory(int nid, u64 start, u64 size, start, start + size, rc); return -EFAULT; } - flush_dcache_range(start, start + size); return __add_pages(nid, start_pfn, nr_pages, restrictions); } @@ -130,14 +152,14 @@ void __ref arch_remove_memory(int nid, u64 start, u64 size, { unsigned long start_pfn = start >> PAGE_SHIFT; unsigned long nr_pages = size >> PAGE_SHIFT; - struct page *page = pfn_to_page(start_pfn) + vmem_altmap_offset(altmap); int ret; - __remove_pages(page_zone(page), start_pfn, nr_pages, altmap); + __remove_pages(start_pfn, nr_pages, altmap); /* Remove htab bolted mappings for this section of memory */ start = (unsigned long)__va(start); - flush_dcache_range(start, start + size); + flush_dcache_range_chunked(start, start + size, FLUSH_CHUNK_SIZE); + ret = remove_section_mapping(start, start + size); WARN_ON_ONCE(ret); @@ -201,10 +223,10 @@ static int __init mark_nonram_nosave(void) * everything else. GFP_DMA32 page allocations automatically fall back to * ZONE_DMA. * - * By using 31-bit unconditionally, we can exploit ARCH_ZONE_DMA_BITS to - * inform the generic DMA mapping code. 32-bit only devices (if not handled - * by an IOMMU anyway) will take a first dip into ZONE_NORMAL and get - * otherwise served by ZONE_DMA. + * By using 31-bit unconditionally, we can exploit zone_dma_bits to inform the + * generic DMA mapping code. 32-bit only devices (if not handled by an IOMMU + * anyway) will take a first dip into ZONE_NORMAL and get otherwise served by + * ZONE_DMA. */ static unsigned long max_zone_pfns[MAX_NR_ZONES]; @@ -216,15 +238,13 @@ void __init paging_init(void) unsigned long long total_ram = memblock_phys_mem_size(); phys_addr_t top_of_ram = memblock_end_of_DRAM(); -#ifdef CONFIG_PPC32 - unsigned long v = __fix_to_virt(__end_of_fixed_addresses - 1); - unsigned long end = __fix_to_virt(FIX_HOLE); +#ifdef CONFIG_HIGHMEM + unsigned long v = __fix_to_virt(FIX_KMAP_END); + unsigned long end = __fix_to_virt(FIX_KMAP_BEGIN); for (; v < end; v += PAGE_SIZE) map_kernel_page(v, 0, __pgprot(0)); /* XXX gross */ -#endif -#ifdef CONFIG_HIGHMEM map_kernel_page(PKMAP_BASE, 0, __pgprot(0)); /* XXX gross */ pkmap_page_table = virt_to_kpte(PKMAP_BASE); @@ -237,9 +257,18 @@ void __init paging_init(void) printk(KERN_DEBUG "Memory hole size: %ldMB\n", (long int)((top_of_ram - total_ram) >> 20)); + /* + * Allow 30-bit DMA for very limited Broadcom wifi chips on many + * powerbooks. + */ + if (IS_ENABLED(CONFIG_PPC32)) + zone_dma_bits = 30; + else + zone_dma_bits = 31; + #ifdef CONFIG_ZONE_DMA max_zone_pfns[ZONE_DMA] = min(max_low_pfn, - 1UL << (ARCH_ZONE_DMA_BITS - PAGE_SHIFT)); + 1UL << (zone_dma_bits - PAGE_SHIFT)); #endif max_zone_pfns[ZONE_NORMAL] = max_low_pfn; #ifdef CONFIG_HIGHMEM @@ -260,11 +289,22 @@ void __init mem_init(void) BUILD_BUG_ON(MMU_PAGE_COUNT > 16); #ifdef CONFIG_SWIOTLB + /* + * Some platforms (e.g. 85xx) limit DMA-able memory way below + * 4G. We force memblock to bottom-up mode to ensure that the + * memory allocated in swiotlb_init() is DMA-able. + * As it's the last memblock allocation, no need to reset it + * back to to-down. + */ + memblock_set_bottom_up(true); swiotlb_init(0); #endif high_memory = (void *) __va(max_low_pfn * PAGE_SIZE); set_max_mapnr(max_pfn); + + kasan_late_init(); + memblock_free_all(); #ifdef CONFIG_HIGHMEM @@ -302,12 +342,9 @@ void __init mem_init(void) pr_info(" * 0x%08lx..0x%08lx : highmem PTEs\n", PKMAP_BASE, PKMAP_ADDR(LAST_PKMAP)); #endif /* CONFIG_HIGHMEM */ -#ifdef CONFIG_NOT_COHERENT_CACHE - pr_info(" * 0x%08lx..0x%08lx : consistent mem\n", - IOREMAP_TOP, IOREMAP_TOP + CONFIG_CONSISTENT_SIZE); -#endif /* CONFIG_NOT_COHERENT_CACHE */ - pr_info(" * 0x%08lx..0x%08lx : early ioremap\n", - ioremap_bot, IOREMAP_TOP); + if (ioremap_bot != IOREMAP_TOP) + pr_info(" * 0x%08lx..0x%08lx : early ioremap\n", + ioremap_bot, IOREMAP_TOP); pr_info(" * 0x%08lx..0x%08lx : vmalloc & ioremap\n", VMALLOC_START, VMALLOC_END); #endif /* CONFIG_PPC32 */ @@ -321,6 +358,120 @@ void free_initmem(void) free_initmem_default(POISON_FREE_INITMEM); } +/** + * flush_coherent_icache() - if a CPU has a coherent icache, flush it + * @addr: The base address to use (can be any valid address, the whole cache will be flushed) + * Return true if the cache was flushed, false otherwise + */ +static inline bool flush_coherent_icache(unsigned long addr) +{ + /* + * For a snooping icache, we still need a dummy icbi to purge all the + * prefetched instructions from the ifetch buffers. We also need a sync + * before the icbi to order the the actual stores to memory that might + * have modified instructions with the icbi. + */ + if (cpu_has_feature(CPU_FTR_COHERENT_ICACHE)) { + mb(); /* sync */ + icbi((void *)addr); + mb(); /* sync */ + isync(); + return true; + } + + return false; +} + +/** + * invalidate_icache_range() - Flush the icache by issuing icbi across an address range + * @start: the start address + * @stop: the stop address (exclusive) + */ +static void invalidate_icache_range(unsigned long start, unsigned long stop) +{ + unsigned long shift = l1_icache_shift(); + unsigned long bytes = l1_icache_bytes(); + char *addr = (char *)(start & ~(bytes - 1)); + unsigned long size = stop - (unsigned long)addr + (bytes - 1); + unsigned long i; + + for (i = 0; i < size >> shift; i++, addr += bytes) + icbi(addr); + + mb(); /* sync */ + isync(); +} + +/** + * flush_icache_range: Write any modified data cache blocks out to memory + * and invalidate the corresponding blocks in the instruction cache + * + * Generic code will call this after writing memory, before executing from it. + * + * @start: the start address + * @stop: the stop address (exclusive) + */ +void flush_icache_range(unsigned long start, unsigned long stop) +{ + if (flush_coherent_icache(start)) + return; + + clean_dcache_range(start, stop); + + if (IS_ENABLED(CONFIG_44x)) { + /* + * Flash invalidate on 44x because we are passed kmapped + * addresses and this doesn't work for userspace pages due to + * the virtually tagged icache. + */ + iccci((void *)start); + mb(); /* sync */ + isync(); + } else + invalidate_icache_range(start, stop); +} +EXPORT_SYMBOL(flush_icache_range); + +#if !defined(CONFIG_PPC_8xx) && !defined(CONFIG_PPC64) +/** + * flush_dcache_icache_phys() - Flush a page by it's physical address + * @physaddr: the physical address of the page + */ +static void flush_dcache_icache_phys(unsigned long physaddr) +{ + unsigned long bytes = l1_dcache_bytes(); + unsigned long nb = PAGE_SIZE / bytes; + unsigned long addr = physaddr & PAGE_MASK; + unsigned long msr, msr0; + unsigned long loop1 = addr, loop2 = addr; + + msr0 = mfmsr(); + msr = msr0 & ~MSR_DR; + /* + * This must remain as ASM to prevent potential memory accesses + * while the data MMU is disabled + */ + asm volatile( + " mtctr %2;\n" + " mtmsr %3;\n" + " isync;\n" + "0: dcbst 0, %0;\n" + " addi %0, %0, %4;\n" + " bdnz 0b;\n" + " sync;\n" + " mtctr %2;\n" + "1: icbi 0, %1;\n" + " addi %1, %1, %4;\n" + " bdnz 1b;\n" + " sync;\n" + " mtmsr %5;\n" + " isync;\n" + : "+&r" (loop1), "+&r" (loop2) + : "r" (nb), "r" (msr), "i" (bytes), "r" (msr0) + : "ctr", "memory"); +} +#endif // !defined(CONFIG_PPC_8xx) && !defined(CONFIG_PPC64) + /* * This is called when a page has been modified by the kernel. * It just marks the page as not i-cache clean. We do the i-cache @@ -353,12 +504,46 @@ void flush_dcache_icache_page(struct page *page) __flush_dcache_icache(start); kunmap_atomic(start); } else { - __flush_dcache_icache_phys(page_to_pfn(page) << PAGE_SHIFT); + unsigned long addr = page_to_pfn(page) << PAGE_SHIFT; + + if (flush_coherent_icache(addr)) + return; + flush_dcache_icache_phys(addr); } #endif } EXPORT_SYMBOL(flush_dcache_icache_page); +/** + * __flush_dcache_icache(): Flush a particular page from the data cache to RAM. + * Note: this is necessary because the instruction cache does *not* + * snoop from the data cache. + * + * @page: the address of the page to flush + */ +void __flush_dcache_icache(void *p) +{ + unsigned long addr = (unsigned long)p; + + if (flush_coherent_icache(addr)) + return; + + clean_dcache_range(addr, addr + PAGE_SIZE); + + /* + * We don't flush the icache on 44x. Those have a virtual icache and we + * don't have access to the virtual address here (it's not the page + * vaddr but where it's mapped in user space). The flushing of the + * icache on these is handled elsewhere, when a change in the address + * space occurs, before returning to user space. + */ + + if (cpu_has_feature(MMU_FTR_TYPE_44x)) + return; + + invalidate_icache_range(addr, addr + PAGE_SIZE); +} + void clear_user_page(void *page, unsigned long vaddr, struct page *pg) { clear_page(page); @@ -407,63 +592,6 @@ void flush_icache_user_range(struct vm_area_struct *vma, struct page *page, EXPORT_SYMBOL(flush_icache_user_range); /* - * This is called at the end of handling a user page fault, when the - * fault has been handled by updating a PTE in the linux page tables. - * We use it to preload an HPTE into the hash table corresponding to - * the updated linux PTE. - * - * This must always be called with the pte lock held. - */ -void update_mmu_cache(struct vm_area_struct *vma, unsigned long address, - pte_t *ptep) -{ -#ifdef CONFIG_PPC_BOOK3S - /* - * We don't need to worry about _PAGE_PRESENT here because we are - * called with either mm->page_table_lock held or ptl lock held - */ - unsigned long trap; - bool is_exec; - - if (radix_enabled()) { - prefetch((void *)address); - return; - } - - /* We only want HPTEs for linux PTEs that have _PAGE_ACCESSED set */ - if (!pte_young(*ptep) || address >= TASK_SIZE) - return; - - /* We try to figure out if we are coming from an instruction - * access fault and pass that down to __hash_page so we avoid - * double-faulting on execution of fresh text. We have to test - * for regs NULL since init will get here first thing at boot - * - * We also avoid filling the hash if not coming from a fault - */ - - trap = current->thread.regs ? TRAP(current->thread.regs) : 0UL; - switch (trap) { - case 0x300: - is_exec = false; - break; - case 0x400: - is_exec = true; - break; - default: - return; - } - - hash_preload(vma->vm_mm, address, is_exec, trap); -#endif /* CONFIG_PPC_BOOK3S */ -#if (defined(CONFIG_PPC_BOOK3E_64) || defined(CONFIG_PPC_FSL_BOOK3E)) \ - && defined(CONFIG_HUGETLB_PAGE) - if (is_vm_hugetlb_page(vma)) - book3e_hugetlb_preload(vma, address, *ptep); -#endif -} - -/* * System memory should not be in /proc/iomem but various tools expect it * (eg kdump). */ |