diff options
Diffstat (limited to 'arch/powerpc/kernel/eeh.c')
-rw-r--r-- | arch/powerpc/kernel/eeh.c | 176 |
1 files changed, 108 insertions, 68 deletions
diff --git a/arch/powerpc/kernel/eeh.c b/arch/powerpc/kernel/eeh.c index 3b2252e7731b..a4c62eb0ee48 100644 --- a/arch/powerpc/kernel/eeh.c +++ b/arch/powerpc/kernel/eeh.c @@ -164,30 +164,34 @@ __setup("eeh=", eeh_setup); */ static size_t eeh_dump_dev_log(struct eeh_dev *edev, char *buf, size_t len) { - struct device_node *dn = eeh_dev_to_of_node(edev); + struct pci_dn *pdn = eeh_dev_to_pdn(edev); u32 cfg; int cap, i; int n = 0, l = 0; char buffer[128]; - n += scnprintf(buf+n, len-n, "%s\n", dn->full_name); - pr_warn("EEH: of node=%s\n", dn->full_name); + n += scnprintf(buf+n, len-n, "%04x:%02x:%02x:%01x\n", + edev->phb->global_number, pdn->busno, + PCI_SLOT(pdn->devfn), PCI_FUNC(pdn->devfn)); + pr_warn("EEH: of node=%04x:%02x:%02x:%01x\n", + edev->phb->global_number, pdn->busno, + PCI_SLOT(pdn->devfn), PCI_FUNC(pdn->devfn)); - eeh_ops->read_config(dn, PCI_VENDOR_ID, 4, &cfg); + eeh_ops->read_config(pdn, PCI_VENDOR_ID, 4, &cfg); n += scnprintf(buf+n, len-n, "dev/vend:%08x\n", cfg); pr_warn("EEH: PCI device/vendor: %08x\n", cfg); - eeh_ops->read_config(dn, PCI_COMMAND, 4, &cfg); + eeh_ops->read_config(pdn, PCI_COMMAND, 4, &cfg); n += scnprintf(buf+n, len-n, "cmd/stat:%x\n", cfg); pr_warn("EEH: PCI cmd/status register: %08x\n", cfg); /* Gather bridge-specific registers */ if (edev->mode & EEH_DEV_BRIDGE) { - eeh_ops->read_config(dn, PCI_SEC_STATUS, 2, &cfg); + eeh_ops->read_config(pdn, PCI_SEC_STATUS, 2, &cfg); n += scnprintf(buf+n, len-n, "sec stat:%x\n", cfg); pr_warn("EEH: Bridge secondary status: %04x\n", cfg); - eeh_ops->read_config(dn, PCI_BRIDGE_CONTROL, 2, &cfg); + eeh_ops->read_config(pdn, PCI_BRIDGE_CONTROL, 2, &cfg); n += scnprintf(buf+n, len-n, "brdg ctl:%x\n", cfg); pr_warn("EEH: Bridge control: %04x\n", cfg); } @@ -195,11 +199,11 @@ static size_t eeh_dump_dev_log(struct eeh_dev *edev, char *buf, size_t len) /* Dump out the PCI-X command and status regs */ cap = edev->pcix_cap; if (cap) { - eeh_ops->read_config(dn, cap, 4, &cfg); + eeh_ops->read_config(pdn, cap, 4, &cfg); n += scnprintf(buf+n, len-n, "pcix-cmd:%x\n", cfg); pr_warn("EEH: PCI-X cmd: %08x\n", cfg); - eeh_ops->read_config(dn, cap+4, 4, &cfg); + eeh_ops->read_config(pdn, cap+4, 4, &cfg); n += scnprintf(buf+n, len-n, "pcix-stat:%x\n", cfg); pr_warn("EEH: PCI-X status: %08x\n", cfg); } @@ -211,7 +215,7 @@ static size_t eeh_dump_dev_log(struct eeh_dev *edev, char *buf, size_t len) pr_warn("EEH: PCI-E capabilities and status follow:\n"); for (i=0; i<=8; i++) { - eeh_ops->read_config(dn, cap+4*i, 4, &cfg); + eeh_ops->read_config(pdn, cap+4*i, 4, &cfg); n += scnprintf(buf+n, len-n, "%02x:%x\n", 4*i, cfg); if ((i % 4) == 0) { @@ -238,7 +242,7 @@ static size_t eeh_dump_dev_log(struct eeh_dev *edev, char *buf, size_t len) pr_warn("EEH: PCI-E AER capability register set follows:\n"); for (i=0; i<=13; i++) { - eeh_ops->read_config(dn, cap+4*i, 4, &cfg); + eeh_ops->read_config(pdn, cap+4*i, 4, &cfg); n += scnprintf(buf+n, len-n, "%02x:%x\n", 4*i, cfg); if ((i % 4) == 0) { @@ -414,11 +418,11 @@ int eeh_dev_check_failure(struct eeh_dev *edev) int ret; int active_flags = (EEH_STATE_MMIO_ACTIVE | EEH_STATE_DMA_ACTIVE); unsigned long flags; - struct device_node *dn; + struct pci_dn *pdn; struct pci_dev *dev; struct eeh_pe *pe, *parent_pe, *phb_pe; int rc = 0; - const char *location; + const char *location = NULL; eeh_stats.total_mmio_ffs++; @@ -429,15 +433,14 @@ int eeh_dev_check_failure(struct eeh_dev *edev) eeh_stats.no_dn++; return 0; } - dn = eeh_dev_to_of_node(edev); dev = eeh_dev_to_pci_dev(edev); pe = eeh_dev_to_pe(edev); /* Access to IO BARs might get this far and still not want checking. */ if (!pe) { eeh_stats.ignored_check++; - pr_debug("EEH: Ignored check for %s %s\n", - eeh_pci_name(dev), dn->full_name); + pr_debug("EEH: Ignored check for %s\n", + eeh_pci_name(dev)); return 0; } @@ -473,10 +476,13 @@ int eeh_dev_check_failure(struct eeh_dev *edev) if (pe->state & EEH_PE_ISOLATED) { pe->check_count++; if (pe->check_count % EEH_MAX_FAILS == 0) { - location = of_get_property(dn, "ibm,loc-code", NULL); + pdn = eeh_dev_to_pdn(edev); + if (pdn->node) + location = of_get_property(pdn->node, "ibm,loc-code", NULL); printk(KERN_ERR "EEH: %d reads ignored for recovering device at " "location=%s driver=%s pci addr=%s\n", - pe->check_count, location, + pe->check_count, + location ? location : "unknown", eeh_driver_name(dev), eeh_pci_name(dev)); printk(KERN_ERR "EEH: Might be infinite loop in %s driver\n", eeh_driver_name(dev)); @@ -667,6 +673,55 @@ int eeh_pci_enable(struct eeh_pe *pe, int function) return rc; } +static void *eeh_disable_and_save_dev_state(void *data, void *userdata) +{ + struct eeh_dev *edev = data; + struct pci_dev *pdev = eeh_dev_to_pci_dev(edev); + struct pci_dev *dev = userdata; + + /* + * The caller should have disabled and saved the + * state for the specified device + */ + if (!pdev || pdev == dev) + return NULL; + + /* Ensure we have D0 power state */ + pci_set_power_state(pdev, PCI_D0); + + /* Save device state */ + pci_save_state(pdev); + + /* + * Disable device to avoid any DMA traffic and + * interrupt from the device + */ + pci_write_config_word(pdev, PCI_COMMAND, PCI_COMMAND_INTX_DISABLE); + + return NULL; +} + +static void *eeh_restore_dev_state(void *data, void *userdata) +{ + struct eeh_dev *edev = data; + struct pci_dn *pdn = eeh_dev_to_pdn(edev); + struct pci_dev *pdev = eeh_dev_to_pci_dev(edev); + struct pci_dev *dev = userdata; + + if (!pdev) + return NULL; + + /* Apply customization from firmware */ + if (pdn && eeh_ops->restore_config) + eeh_ops->restore_config(pdn); + + /* The caller should restore state for the specified device */ + if (pdev != dev) + pci_save_state(pdev); + + return NULL; +} + /** * pcibios_set_pcie_slot_reset - Set PCI-E reset state * @dev: pci device struct @@ -689,13 +744,19 @@ int pcibios_set_pcie_reset_state(struct pci_dev *dev, enum pcie_reset_state stat switch (state) { case pcie_deassert_reset: eeh_ops->reset(pe, EEH_RESET_DEACTIVATE); + eeh_unfreeze_pe(pe, false); eeh_pe_state_clear(pe, EEH_PE_CFG_BLOCKED); + eeh_pe_dev_traverse(pe, eeh_restore_dev_state, dev); break; case pcie_hot_reset: + eeh_ops->set_option(pe, EEH_OPT_FREEZE_PE); + eeh_pe_dev_traverse(pe, eeh_disable_and_save_dev_state, dev); eeh_pe_state_mark(pe, EEH_PE_CFG_BLOCKED); eeh_ops->reset(pe, EEH_RESET_HOT); break; case pcie_warm_reset: + eeh_ops->set_option(pe, EEH_OPT_FREEZE_PE); + eeh_pe_dev_traverse(pe, eeh_disable_and_save_dev_state, dev); eeh_pe_state_mark(pe, EEH_PE_CFG_BLOCKED); eeh_ops->reset(pe, EEH_RESET_FUNDAMENTAL); break; @@ -815,15 +876,15 @@ out: */ void eeh_save_bars(struct eeh_dev *edev) { + struct pci_dn *pdn; int i; - struct device_node *dn; - if (!edev) + pdn = eeh_dev_to_pdn(edev); + if (!pdn) return; - dn = eeh_dev_to_of_node(edev); for (i = 0; i < 16; i++) - eeh_ops->read_config(dn, i * 4, 4, &edev->config_space[i]); + eeh_ops->read_config(pdn, i * 4, 4, &edev->config_space[i]); /* * For PCI bridges including root port, we need enable bus @@ -914,7 +975,7 @@ static struct notifier_block eeh_reboot_nb = { int eeh_init(void) { struct pci_controller *hose, *tmp; - struct device_node *phb; + struct pci_dn *pdn; static int cnt = 0; int ret = 0; @@ -949,20 +1010,9 @@ int eeh_init(void) return ret; /* Enable EEH for all adapters */ - if (eeh_has_flag(EEH_PROBE_MODE_DEVTREE)) { - list_for_each_entry_safe(hose, tmp, - &hose_list, list_node) { - phb = hose->dn; - traverse_pci_devices(phb, eeh_ops->of_probe, NULL); - } - } else if (eeh_has_flag(EEH_PROBE_MODE_DEV)) { - list_for_each_entry_safe(hose, tmp, - &hose_list, list_node) - pci_walk_bus(hose->bus, eeh_ops->dev_probe, NULL); - } else { - pr_warn("%s: Invalid probe mode %x", - __func__, eeh_subsystem_flags); - return -EINVAL; + list_for_each_entry_safe(hose, tmp, &hose_list, list_node) { + pdn = hose->pci_data; + traverse_pci_dn(pdn, eeh_ops->probe, NULL); } /* @@ -987,8 +1037,8 @@ int eeh_init(void) core_initcall_sync(eeh_init); /** - * eeh_add_device_early - Enable EEH for the indicated device_node - * @dn: device node for which to set up EEH + * eeh_add_device_early - Enable EEH for the indicated device node + * @pdn: PCI device node for which to set up EEH * * This routine must be used to perform EEH initialization for PCI * devices that were added after system boot (e.g. hotplug, dlpar). @@ -998,44 +1048,41 @@ core_initcall_sync(eeh_init); * on the CEC architecture, type of the device, on earlier boot * command-line arguments & etc. */ -void eeh_add_device_early(struct device_node *dn) +void eeh_add_device_early(struct pci_dn *pdn) { struct pci_controller *phb; + struct eeh_dev *edev = pdn_to_eeh_dev(pdn); - /* - * If we're doing EEH probe based on PCI device, we - * would delay the probe until late stage because - * the PCI device isn't available this moment. - */ - if (!eeh_has_flag(EEH_PROBE_MODE_DEVTREE)) + if (!edev || !eeh_enabled()) return; - if (!of_node_to_eeh_dev(dn)) - return; - phb = of_node_to_eeh_dev(dn)->phb; - /* USB Bus children of PCI devices will not have BUID's */ - if (NULL == phb || 0 == phb->buid) + phb = edev->phb; + if (NULL == phb || + (eeh_has_flag(EEH_PROBE_MODE_DEVTREE) && 0 == phb->buid)) return; - eeh_ops->of_probe(dn, NULL); + eeh_ops->probe(pdn, NULL); } /** * eeh_add_device_tree_early - Enable EEH for the indicated device - * @dn: device node + * @pdn: PCI device node * * This routine must be used to perform EEH initialization for the * indicated PCI device that was added after system boot (e.g. * hotplug, dlpar). */ -void eeh_add_device_tree_early(struct device_node *dn) +void eeh_add_device_tree_early(struct pci_dn *pdn) { - struct device_node *sib; + struct pci_dn *n; - for_each_child_of_node(dn, sib) - eeh_add_device_tree_early(sib); - eeh_add_device_early(dn); + if (!pdn) + return; + + list_for_each_entry(n, &pdn->child_list, list) + eeh_add_device_tree_early(n); + eeh_add_device_early(pdn); } EXPORT_SYMBOL_GPL(eeh_add_device_tree_early); @@ -1048,7 +1095,7 @@ EXPORT_SYMBOL_GPL(eeh_add_device_tree_early); */ void eeh_add_device_late(struct pci_dev *dev) { - struct device_node *dn; + struct pci_dn *pdn; struct eeh_dev *edev; if (!dev || !eeh_enabled()) @@ -1056,8 +1103,8 @@ void eeh_add_device_late(struct pci_dev *dev) pr_debug("EEH: Adding device %s\n", pci_name(dev)); - dn = pci_device_to_OF_node(dev); - edev = of_node_to_eeh_dev(dn); + pdn = pci_get_pdn_by_devfn(dev->bus, dev->devfn); + edev = pdn_to_eeh_dev(pdn); if (edev->pdev == dev) { pr_debug("EEH: Already referenced !\n"); return; @@ -1089,13 +1136,6 @@ void eeh_add_device_late(struct pci_dev *dev) edev->pdev = dev; dev->dev.archdata.edev = edev; - /* - * We have to do the EEH probe here because the PCI device - * hasn't been created yet in the early stage. - */ - if (eeh_has_flag(EEH_PROBE_MODE_DEV)) - eeh_ops->dev_probe(dev, NULL); - eeh_addr_cache_insert_dev(dev); } |