summaryrefslogtreecommitdiffstats
path: root/arch/frv/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'arch/frv/Kconfig')
-rw-r--r--arch/frv/Kconfig357
1 files changed, 357 insertions, 0 deletions
diff --git a/arch/frv/Kconfig b/arch/frv/Kconfig
new file mode 100644
index 000000000000..2b19372767eb
--- /dev/null
+++ b/arch/frv/Kconfig
@@ -0,0 +1,357 @@
+#
+# For a description of the syntax of this configuration file,
+# see Documentation/kbuild/kconfig-language.txt.
+#
+config FRV
+ bool
+ default y
+
+config UID16
+ bool
+ default y
+
+config RWSEM_GENERIC_SPINLOCK
+ bool
+ default y
+
+config RWSEM_XCHGADD_ALGORITHM
+ bool
+
+config GENERIC_FIND_NEXT_BIT
+ bool
+ default y
+
+config GENERIC_CALIBRATE_DELAY
+ bool
+ default n
+
+config GENERIC_HARDIRQS
+ bool
+ default n
+
+mainmenu "Fujitsu FR-V Kernel Configuration"
+
+source "init/Kconfig"
+
+
+menu "Fujitsu FR-V system setup"
+
+config MMU
+ bool "MMU support"
+ help
+ This options switches on and off support for the FR-V MMU
+ (effectively switching between vmlinux and uClinux). Not all FR-V
+ CPUs support this. Currently only the FR451 has a sufficiently
+ featured MMU.
+
+config FRV_OUTOFLINE_ATOMIC_OPS
+ bool "Out-of-line the FRV atomic operations"
+ default n
+ help
+ Setting this option causes the FR-V atomic operations to be mostly
+ implemented out-of-line.
+
+ See Documentation/fujitsu/frv/atomic-ops.txt for more information.
+
+config HIGHMEM
+ bool "High memory support"
+ depends on MMU
+ default y
+ help
+ If you wish to use more than 256MB of memory with your MMU based
+ system, you will need to select this option. The kernel can only see
+ the memory between 0xC0000000 and 0xD0000000 directly... everything
+ else must be kmapped.
+
+ The arch is, however, capable of supporting up to 3GB of SDRAM.
+
+config HIGHPTE
+ bool "Allocate page tables in highmem"
+ depends on HIGHMEM
+ default y
+ help
+ The VM uses one page of memory for each page table. For systems
+ with a lot of RAM, this can be wasteful of precious low memory.
+ Setting this option will put user-space page tables in high memory.
+
+choice
+ prompt "uClinux kernel load address"
+ depends on !MMU
+ default UCPAGE_OFFSET_C0000000
+ help
+ This option sets the base address for the uClinux kernel. The kernel
+ will rearrange the SDRAM layout to start at this address, and move
+ itself to start there. It must be greater than 0, and it must be
+ sufficiently less than 0xE0000000 that the SDRAM does not intersect
+ the I/O region.
+
+ The base address must also be aligned such that the SDRAM controller
+ can decode it. For instance, a 512MB SDRAM bank must be 512MB aligned.
+
+config UCPAGE_OFFSET_20000000
+ bool "0x20000000"
+
+config UCPAGE_OFFSET_40000000
+ bool "0x40000000"
+
+config UCPAGE_OFFSET_60000000
+ bool "0x60000000"
+
+config UCPAGE_OFFSET_80000000
+ bool "0x80000000"
+
+config UCPAGE_OFFSET_A0000000
+ bool "0xA0000000"
+
+config UCPAGE_OFFSET_C0000000
+ bool "0xC0000000 (Recommended)"
+
+endchoice
+
+config PROTECT_KERNEL
+ bool "Protect core kernel against userspace"
+ depends on !MMU
+ default y
+ help
+ Selecting this option causes the uClinux kernel to change the
+ permittivity of DAMPR register covering the core kernel image to
+ prevent userspace accessing the underlying memory directly.
+
+choice
+ prompt "CPU Caching mode"
+ default FRV_DEFL_CACHE_WBACK
+ help
+ This option determines the default caching mode for the kernel.
+
+ Write-Back caching mode involves the all reads and writes causing
+ the affected cacheline to be read into the cache first before being
+ operated upon. Memory is not then updated by a write until the cache
+ is filled and a cacheline needs to be displaced from the cache to
+ make room. Only at that point is it written back.
+
+ Write-Behind caching is similar to Write-Back caching, except that a
+ write won't fetch a cacheline into the cache if there isn't already
+ one there; it will write directly to memory instead.
+
+ Write-Through caching only fetches cachelines from memory on a
+ read. Writes always get written directly to memory. If the affected
+ cacheline is also in cache, it will be updated too.
+
+ The final option is to turn of caching entirely.
+
+ Note that not all CPUs support Write-Behind caching. If the CPU on
+ which the kernel is running doesn't, it'll fall back to Write-Back
+ caching.
+
+config FRV_DEFL_CACHE_WBACK
+ bool "Write-Back"
+
+config FRV_DEFL_CACHE_WBEHIND
+ bool "Write-Behind"
+
+config FRV_DEFL_CACHE_WTHRU
+ bool "Write-Through"
+
+config FRV_DEFL_CACHE_DISABLED
+ bool "Disabled"
+
+endchoice
+
+menu "CPU core support"
+
+config CPU_FR401
+ bool "Include FR401 core support"
+ depends on !MMU
+ default y
+ help
+ This enables support for the FR401, FR401A and FR403 CPUs
+
+config CPU_FR405
+ bool "Include FR405 core support"
+ depends on !MMU
+ default y
+ help
+ This enables support for the FR405 CPU
+
+config CPU_FR451
+ bool "Include FR451 core support"
+ default y
+ help
+ This enables support for the FR451 CPU
+
+config CPU_FR451_COMPILE
+ bool "Specifically compile for FR451 core"
+ depends on CPU_FR451 && !CPU_FR401 && !CPU_FR405 && !CPU_FR551
+ default y
+ help
+ This causes appropriate flags to be passed to the compiler to
+ optimise for the FR451 CPU
+
+config CPU_FR551
+ bool "Include FR551 core support"
+ depends on !MMU
+ default y
+ help
+ This enables support for the FR555 CPU
+
+config CPU_FR551_COMPILE
+ bool "Specifically compile for FR551 core"
+ depends on CPU_FR551 && !CPU_FR401 && !CPU_FR405 && !CPU_FR451
+ default y
+ help
+ This causes appropriate flags to be passed to the compiler to
+ optimise for the FR555 CPU
+
+config FRV_L1_CACHE_SHIFT
+ int
+ default "5" if CPU_FR401 || CPU_FR405 || CPU_FR451
+ default "6" if CPU_FR551
+
+endmenu
+
+choice
+ prompt "System support"
+ default MB93091_VDK
+
+config MB93091_VDK
+ bool "MB93091 CPU board with or without motherboard"
+
+config MB93093_PDK
+ bool "MB93093 PDK unit"
+
+endchoice
+
+if MB93091_VDK
+choice
+ prompt "Motherboard support"
+ default MB93090_MB00
+
+config MB93090_MB00
+ bool "Use the MB93090-MB00 motherboard"
+ help
+ Select this option if the MB93091 CPU board is going to be used with
+ a MB93090-MB00 VDK motherboard
+
+config MB93091_NO_MB
+ bool "Use standalone"
+ help
+ Select this option if the MB93091 CPU board is going to be used
+ without a motherboard
+
+endchoice
+endif
+
+choice
+ prompt "GP-Relative data support"
+ default GPREL_DATA_8
+ help
+ This option controls what data, if any, should be placed in the GP
+ relative data sections. Using this means that the compiler can
+ generate accesses to the data using GR16-relative addressing which
+ is faster than absolute instructions and saves space (2 instructions
+ per access).
+
+ However, the GPREL region is limited in size because the immediate
+ value used in the load and store instructions is limited to a 12-bit
+ signed number.
+
+ So if the linker starts complaining that accesses to GPREL data are
+ out of range, try changing this option from the default.
+
+ Note that modules will always be compiled with this feature disabled
+ as the module data will not be in range of the GP base address.
+
+config GPREL_DATA_8
+ bool "Put data objects of up to 8 bytes into GP-REL"
+
+config GPREL_DATA_4
+ bool "Put data objects of up to 4 bytes into GP-REL"
+
+config GPREL_DATA_NONE
+ bool "Don't use GP-REL"
+
+endchoice
+
+config PCI
+ bool "Use PCI"
+ depends on MB93090_MB00
+ default y
+ help
+ Some FR-V systems (such as the MB93090-MB00 VDK) have PCI
+ onboard. If you have one of these boards and you wish to use the PCI
+ facilities, say Y here.
+
+ The PCI-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>, contains valuable
+ information about which PCI hardware does work under Linux and which
+ doesn't.
+
+config RESERVE_DMA_COHERENT
+ bool "Reserve DMA coherent memory"
+ depends on PCI && !MMU
+ default y
+ help
+ Many PCI drivers require access to uncached memory for DMA device
+ communications (such as is done with some Ethernet buffer rings). If
+ a fully featured MMU is available, this can be done through page
+ table settings, but if not, a region has to be set aside and marked
+ with a special DAMPR register.
+
+ Setting this option causes uClinux to set aside a portion of the
+ available memory for use in this manner. The memory will then be
+ unavailable for normal kernel use.
+
+source "drivers/pci/Kconfig"
+
+config PCMCIA
+ tristate "Use PCMCIA"
+ help
+ Say Y here if you want to attach PCMCIA- or PC-cards to your FR-V
+ board. These are credit-card size devices such as network cards,
+ modems or hard drives often used with laptops computers. There are
+ actually two varieties of these cards: the older 16 bit PCMCIA cards
+ and the newer 32 bit CardBus cards. If you want to use CardBus
+ cards, you need to say Y here and also to "CardBus support" below.
+
+ To use your PC-cards, you will need supporting software from David
+ Hinds pcmcia-cs package (see the file <file:Documentation/Changes>
+ for location). Please also read the PCMCIA-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ To compile this driver as modules, choose M here: the
+ modules will be called pcmcia_core and ds.
+
+#config MATH_EMULATION
+# bool "Math emulation support (EXPERIMENTAL)"
+# depends on EXPERIMENTAL
+# help
+# At some point in the future, this will cause floating-point math
+# instructions to be emulated by the kernel on machines that lack a
+# floating-point math coprocessor. Thrill-seekers and chronically
+# sleep-deprived psychotic hacker types can say Y now, everyone else
+# should probably wait a while.
+
+menu "Power management options"
+source kernel/power/Kconfig
+endmenu
+
+endmenu
+
+
+menu "Executable formats"
+
+source "fs/Kconfig.binfmt"
+
+endmenu
+
+source "drivers/Kconfig"
+
+source "fs/Kconfig"
+
+source "arch/frv/Kconfig.debug"
+
+source "security/Kconfig"
+
+source "crypto/Kconfig"
+
+source "lib/Kconfig"
OpenPOWER on IntegriCloud