diff options
Diffstat (limited to 'arch/arm64/boot/dts')
378 files changed, 46554 insertions, 11077 deletions
diff --git a/arch/arm64/boot/dts/actions/s900-bubblegum-96.dts b/arch/arm64/boot/dts/actions/s900-bubblegum-96.dts index 732daaa6e9d3..59291e0ea1ee 100644 --- a/arch/arm64/boot/dts/actions/s900-bubblegum-96.dts +++ b/arch/arm64/boot/dts/actions/s900-bubblegum-96.dts @@ -12,6 +12,9 @@ model = "Bubblegum-96"; aliases { + mmc0 = &mmc0; + mmc1 = &mmc1; + mmc2 = &mmc2; serial5 = &uart5; }; @@ -23,6 +26,24 @@ device_type = "memory"; reg = <0x0 0x0 0x0 0x80000000>; }; + + /* Fixed regulator used in the absence of PMIC */ + vcc_3v1: vcc-3v1 { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.1V"; + regulator-min-microvolt = <3100000>; + regulator-max-microvolt = <3100000>; + regulator-always-on; + }; + + /* Fixed regulator used in the absence of PMIC */ + sd_vcc: sd-vcc { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.1V"; + regulator-min-microvolt = <3100000>; + regulator-max-microvolt = <3100000>; + regulator-always-on; + }; }; &i2c0 { @@ -241,6 +262,47 @@ bias-pull-up; }; }; + + mmc0_default: mmc0_default { + pinmux { + groups = "sd0_d0_mfp", "sd0_d1_mfp", "sd0_d2_d3_mfp", + "sd0_cmd_mfp", "sd0_clk_mfp"; + function = "sd0"; + }; + }; + + mmc2_default: mmc2_default { + pinmux { + groups = "nand0_d0_ceb3_mfp"; + function = "sd2"; + }; + }; +}; + +/* uSD */ +&mmc0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_default>; + no-sdio; + no-mmc; + no-1-8-v; + cd-gpios = <&pinctrl 120 GPIO_ACTIVE_LOW>; + bus-width = <4>; + vmmc-supply = <&sd_vcc>; + vqmmc-supply = <&sd_vcc>; +}; + +/* eMMC */ +&mmc2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_default>; + no-sdio; + no-sd; + non-removable; + bus-width = <8>; + vmmc-supply = <&vcc_3v1>; }; &timer { diff --git a/arch/arm64/boot/dts/actions/s900.dtsi b/arch/arm64/boot/dts/actions/s900.dtsi index df3a68a3ac97..eb35cf78ab73 100644 --- a/arch/arm64/boot/dts/actions/s900.dtsi +++ b/arch/arm64/boot/dts/actions/s900.dtsi @@ -4,6 +4,7 @@ */ #include <dt-bindings/clock/actions,s900-cmu.h> +#include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/reset/actions,s900-reset.h> @@ -284,5 +285,49 @@ dma-requests = <46>; clocks = <&cmu CLK_DMAC>; }; + + mmc0: mmc@e0330000 { + compatible = "actions,owl-mmc"; + reg = <0x0 0xe0330000 0x0 0x4000>; + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cmu CLK_SD0>; + resets = <&cmu RESET_SD0>; + dmas = <&dma 2>; + dma-names = "mmc"; + status = "disabled"; + }; + + mmc1: mmc@e0334000 { + compatible = "actions,owl-mmc"; + reg = <0x0 0xe0334000 0x0 0x4000>; + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cmu CLK_SD1>; + resets = <&cmu RESET_SD1>; + dmas = <&dma 3>; + dma-names = "mmc"; + status = "disabled"; + }; + + mmc2: mmc@e0338000 { + compatible = "actions,owl-mmc"; + reg = <0x0 0xe0338000 0x0 0x4000>; + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cmu CLK_SD2>; + resets = <&cmu RESET_SD2>; + dmas = <&dma 4>; + dma-names = "mmc"; + status = "disabled"; + }; + + mmc3: mmc@e033c000 { + compatible = "actions,owl-mmc"; + reg = <0x0 0xe033c000 0x0 0x4000>; + interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cmu CLK_SD3>; + resets = <&cmu RESET_SD3>; + dmas = <&dma 46>; + dma-names = "mmc"; + status = "disabled"; + }; }; }; diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile index f6db0611cb85..cf4f78617c3f 100644 --- a/arch/arm64/boot/dts/allwinner/Makefile +++ b/arch/arm64/boot/dts/allwinner/Makefile @@ -4,6 +4,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-bananapi-m64.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-nanopi-a64.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-oceanic-5205-5inmfd.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-olinuxino.dtb +dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-olinuxino-emmc.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-orangepi-win.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pine64-lts.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pine64-plus.dtb sun50i-a64-pine64.dtb @@ -14,6 +15,8 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-bananapi-m2-plus.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-bananapi-m2-plus-v1.2.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-emlid-neutis-n5-devboard.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-libretech-all-h3-cc.dtb +dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-libretech-all-h3-it.dtb +dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-libretech-all-h5-cc.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-neo2.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-neo-plus2.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-pc2.dtb @@ -25,3 +28,5 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-orangepi-3.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-orangepi-lite2.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-orangepi-one-plus.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-pine-h64.dtb +dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-pine-h64-model-b.dtb +dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-tanix-tx6.dtb diff --git a/arch/arm64/boot/dts/allwinner/axp803.dtsi b/arch/arm64/boot/dts/allwinner/axp803.dtsi index f0349ef4bfdd..10e9186a76bf 100644 --- a/arch/arm64/boot/dts/allwinner/axp803.dtsi +++ b/arch/arm64/boot/dts/allwinner/axp803.dtsi @@ -1,44 +1,5 @@ -/* - * Copyright 2017 Icenowy Zheng <icenowy@aosc.xyz> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright 2017 Icenowy Zheng <icenowy@aosc.xyz> /* * AXP803 Integrated Power Management Chip diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts index 5634245d11db..c7bd73f35ed8 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts @@ -1,12 +1,11 @@ // SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (C) 2018 Amarula Solutions B.V. - * Author: Jagan Teki <jagan@amarulasolutions.com> - */ +// Copyright (C) 2018 Amarula Solutions B.V. +// Author: Jagan Teki <jagan@amarulasolutions.com> /dts-v1/; #include "sun50i-a64.dtsi" +#include "sun50i-a64-cpu-opp.dtsi" #include <dt-bindings/gpio/gpio.h> @@ -65,6 +64,22 @@ }; }; +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + +&cpu1 { + cpu-supply = <®_dcdc2>; +}; + +&cpu2 { + cpu-supply = <®_dcdc2>; +}; + +&cpu3 { + cpu-supply = <®_dcdc2>; +}; + &csi { status = "okay"; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts index 208373efee49..883f217efb81 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts @@ -1,48 +1,10 @@ -/* - * Copyright (c) 2016 ARM Ltd. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright (c) 2016 ARM Ltd. /dts-v1/; #include "sun50i-a64.dtsi" +#include "sun50i-a64-cpu-opp.dtsi" #include <dt-bindings/gpio/gpio.h> @@ -108,6 +70,22 @@ status = "okay"; }; +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + +&cpu1 { + cpu-supply = <®_dcdc2>; +}; + +&cpu2 { + cpu-supply = <®_dcdc2>; +}; + +&cpu3 { + cpu-supply = <®_dcdc2>; +}; + &dai { status = "okay"; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-cpu-opp.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64-cpu-opp.dtsi new file mode 100644 index 000000000000..578c37490d90 --- /dev/null +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-cpu-opp.dtsi @@ -0,0 +1,75 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2020 Vasily khoruzhick <anarsoul@gmail.com> + */ + +/ { + cpu0_opp_table: opp_table0 { + compatible = "operating-points-v2"; + opp-shared; + + opp-648000000 { + opp-hz = /bits/ 64 <648000000>; + opp-microvolt = <1040000>; + clock-latency-ns = <244144>; /* 8 32k periods */ + }; + + opp-816000000 { + opp-hz = /bits/ 64 <816000000>; + opp-microvolt = <1100000>; + clock-latency-ns = <244144>; /* 8 32k periods */ + }; + + opp-912000000 { + opp-hz = /bits/ 64 <912000000>; + opp-microvolt = <1120000>; + clock-latency-ns = <244144>; /* 8 32k periods */ + }; + + opp-960000000 { + opp-hz = /bits/ 64 <960000000>; + opp-microvolt = <1160000>; + clock-latency-ns = <244144>; /* 8 32k periods */ + }; + + opp-1008000000 { + opp-hz = /bits/ 64 <1008000000>; + opp-microvolt = <1200000>; + clock-latency-ns = <244144>; /* 8 32k periods */ + }; + + opp-1056000000 { + opp-hz = /bits/ 64 <1056000000>; + opp-microvolt = <1240000>; + clock-latency-ns = <244144>; /* 8 32k periods */ + }; + + opp-1104000000 { + opp-hz = /bits/ 64 <1104000000>; + opp-microvolt = <1260000>; + clock-latency-ns = <244144>; /* 8 32k periods */ + }; + + opp-1152000000 { + opp-hz = /bits/ 64 <1152000000>; + opp-microvolt = <1300000>; + clock-latency-ns = <244144>; /* 8 32k periods */ + }; + }; +}; + +&cpu0 { + operating-points-v2 = <&cpu0_opp_table>; +}; + +&cpu1 { + operating-points-v2 = <&cpu0_opp_table>; +}; + +&cpu2 { + operating-points-v2 = <&cpu0_opp_table>; +}; + +&cpu3 { + operating-points-v2 = <&cpu0_opp_table>; +}; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts index 9b9d9157128c..e58db8a6cab6 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts @@ -1,48 +1,10 @@ -/* - * Copyright (C) 2017 Jagan Teki <jteki@openedev.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright (C) 2017 Jagan Teki <jteki@openedev.com> /dts-v1/; #include "sun50i-a64.dtsi" +#include "sun50i-a64-cpu-opp.dtsi" #include <dt-bindings/gpio/gpio.h> @@ -87,6 +49,22 @@ }; }; +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + +&cpu1 { + cpu-supply = <®_dcdc2>; +}; + +&cpu2 { + cpu-supply = <®_dcdc2>; +}; + +&cpu3 { + cpu-supply = <®_dcdc2>; +}; + &de { status = "okay"; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-oceanic-5205-5inmfd.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-oceanic-5205-5inmfd.dts index 787ebd805a3b..577f9e1d08a1 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-oceanic-5205-5inmfd.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-oceanic-5205-5inmfd.dts @@ -1,9 +1,7 @@ // SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (C) 2019 Oceanic Systems (UK) Ltd. - * Copyright (C) 2019 Amarula Solutions B.V. - * Author: Jagan Teki <jagan@amarulasolutions.com> - */ +// Copyright (C) 2019 Oceanic Systems (UK) Ltd. +// Copyright (C) 2019 Amarula Solutions B.V. +// Author: Jagan Teki <jagan@amarulasolutions.com> /dts-v1/; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino-emmc.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino-emmc.dts new file mode 100644 index 000000000000..efb20846de49 --- /dev/null +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino-emmc.dts @@ -0,0 +1,25 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright (C) 2018 Martin Ayotte <martinayotte@gmail.com> +// Copyright (C) 2019 Sunil Mohan Adapa <sunil@medhas.org> + +#include "sun50i-a64-olinuxino.dts" + +/ { + model = "Olimex A64-Olinuxino-eMMC"; + compatible = "olimex,a64-olinuxino-emmc", "allwinner,sun50i-a64"; +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins>; + vmmc-supply = <®_dcdc1>; + vqmmc-supply = <®_eldo1>; + bus-width = <8>; + non-removable; + cap-mmc-hw-reset; + status = "okay"; +}; + +&pio { + vcc-pc-supply = <®_eldo1>; +}; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts index 01a9a52edae4..6dfafa1c879b 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts @@ -1,48 +1,10 @@ -/* - * Copyright (C) 2017 Jagan Teki <jteki@openedev.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright (C) 2017 Jagan Teki <jteki@openedev.com> /dts-v1/; #include "sun50i-a64.dtsi" +#include "sun50i-a64-cpu-opp.dtsi" #include <dt-bindings/gpio/gpio.h> @@ -87,6 +49,22 @@ }; }; +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + +&cpu1 { + cpu-supply = <®_dcdc2>; +}; + +&cpu2 { + cpu-supply = <®_dcdc2>; +}; + +&cpu3 { + cpu-supply = <®_dcdc2>; +}; + &de { status = "okay"; }; @@ -140,7 +118,7 @@ &mmc1 { pinctrl-names = "default"; pinctrl-0 = <&mmc1_pins>; - vmmc-supply = <®_aldo2>; + vmmc-supply = <®_dcdc1>; vqmmc-supply = <®_dldo4>; mmc-pwrseq = <&wifi_pwrseq>; bus-width = <4>; @@ -163,6 +141,23 @@ status = "okay"; }; +&pio { + vcc-pc-supply = <®_dcdc1>; + vcc-pd-supply = <®_dcdc1>; + vcc-pe-supply = <®_aldo1>; + vcc-pg-supply = <®_dldo4>; +}; + +&r_pio { + /* + * FIXME: We can't add that supply for now since it would + * create a circular dependency between pinctrl, the regulator + * and the RSB Bus. + * + * vcc-pl-supply = <®_aldo2>; + */ +}; + &r_rsb { status = "okay"; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts index 5ef3c62c765e..fde9c7a99b17 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts @@ -1,49 +1,11 @@ -/* - * Copyright (C) 2017 Jagan Teki <jteki@openedev.com> - * Copyright (C) 2017-2018 Samuel Holland <samuel@sholland.org> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright (C) 2017 Jagan Teki <jteki@openedev.com> +// Copyright (C) 2017-2018 Samuel Holland <samuel@sholland.org> /dts-v1/; #include "sun50i-a64.dtsi" +#include "sun50i-a64-cpu-opp.dtsi" #include <dt-bindings/gpio/gpio.h> @@ -114,6 +76,35 @@ }; }; +&codec { + status = "okay"; +}; + +&codec_analog { + cpvdd-supply = <®_eldo1>; + status = "okay"; +}; + +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + +&cpu1 { + cpu-supply = <®_dcdc2>; +}; + +&cpu2 { + cpu-supply = <®_dcdc2>; +}; + +&cpu3 { + cpu-supply = <®_dcdc2>; +}; + +&dai { + status = "okay"; +}; + &de { status = "okay"; }; @@ -190,6 +181,10 @@ status = "okay"; }; +&r_ir { + status = "okay"; +}; + &r_rsb { status = "okay"; @@ -329,6 +324,22 @@ vcc-hdmi-supply = <®_dldo1>; }; +&sound { + status = "okay"; + simple-audio-card,widgets = "Headphone", "Headphone Jack", + "Microphone", "Microphone Jack", + "Microphone", "Onboard Microphone"; + simple-audio-card,routing = + "Left DAC", "AIF1 Slot 0 Left", + "Right DAC", "AIF1 Slot 0 Right", + "AIF1 Slot 0 Left ADC", "Left ADC", + "AIF1 Slot 0 Right ADC", "Right ADC", + "Headphone Jack", "HP", + "MIC2", "Microphone Jack", + "Onboard Microphone", "MBIAS", + "MIC1", "Onboard Microphone"; +}; + &spi0 { status = "okay"; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-lts.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-lts.dts index 72d6961dc312..302e24be0a31 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-lts.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-lts.dts @@ -1,8 +1,5 @@ -/* - * SPDX-License-Identifier: (GPL-2.0+ OR MIT) - * - * Copyright (c) 2018 ARM Ltd. - */ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright (c) 2018 ARM Ltd. #include "sun50i-a64-sopine-baseboard.dts" diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts index 24f1aac366d6..b26181cf9095 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts @@ -1,44 +1,5 @@ -/* - * Copyright (c) 2016 ARM Ltd. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright (c) 2016 ARM Ltd. #include "sun50i-a64-pine64.dts" @@ -63,3 +24,12 @@ reg = <1>; }; }; + +®_dc1sw { + /* + * Ethernet PHY needs 30ms to properly power up and some more + * to initialize. 100ms should be plenty of time to finish + * whole process. + */ + regulator-enable-ramp-delay = <100000>; +}; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts index 409523cb0950..2165f238af13 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts @@ -1,48 +1,10 @@ -/* - * Copyright (c) 2016 ARM Ltd. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright (c) 2016 ARM Ltd. /dts-v1/; #include "sun50i-a64.dtsi" +#include "sun50i-a64-cpu-opp.dtsi" #include <dt-bindings/gpio/gpio.h> @@ -84,6 +46,22 @@ status = "okay"; }; +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + +&cpu1 { + cpu-supply = <®_dcdc2>; +}; + +&cpu2 { + cpu-supply = <®_dcdc2>; +}; + +&cpu3 { + cpu-supply = <®_dcdc2>; +}; + &dai { status = "okay"; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts index 2b6345db7dc0..3d894b208901 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts @@ -1,15 +1,14 @@ // SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.xyz> - * Copyright (C) 2018 Vasily Khoruzhick <anarsoul@gmail.com> - * - */ +// Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.xyz> +// Copyright (C) 2018 Vasily Khoruzhick <anarsoul@gmail.com> /dts-v1/; #include "sun50i-a64.dtsi" +#include "sun50i-a64-cpu-opp.dtsi" #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/gpio-keys.h> #include <dt-bindings/input/input.h> #include <dt-bindings/pwm/pwm.h> @@ -60,6 +59,7 @@ linux,code = <SW_LID>; linux,can-disable; wakeup-source; + wakeup-event-action = <EV_ACT_DEASSERTED>; }; }; @@ -98,12 +98,29 @@ status = "okay"; }; +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + +&cpu1 { + cpu-supply = <®_dcdc2>; +}; + +&cpu2 { + cpu-supply = <®_dcdc2>; +}; + +&cpu3 { + cpu-supply = <®_dcdc2>; +}; + &dai { status = "okay"; }; &ehci0 { phys = <&usbphy 0>; + phy-names = "usb"; status = "okay"; }; @@ -150,6 +167,7 @@ &ohci0 { phys = <&usbphy 0>; + phy-names = "usb"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts index e6fb9683f213..2f6ea9f3f6a2 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts @@ -1,47 +1,7 @@ -/* - * Copyright (c) 2017 Icenowy Zheng <icenowy@aosc.xyz> - * - * Based on sun50i-a64-pine64.dts, which is: - * Copyright (c) 2016 ARM Ltd. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright (c) 2017 Icenowy Zheng <icenowy@aosc.xyz> +// Based on sun50i-a64-pine64.dts, which is: +// Copyright (c) 2016 ARM Ltd. /dts-v1/; @@ -55,6 +15,10 @@ aliases { ethernet0 = &emac; serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + serial3 = &uart3; + serial4 = &uart4; }; chosen { @@ -159,6 +123,12 @@ }; ®_dc1sw { + /* + * Ethernet PHY needs 30ms to properly power up and some more + * to initialize. 100ms should be plenty of time to finish + * whole process. + */ + regulator-enable-ramp-delay = <100000>; regulator-name = "vcc-phy"; }; @@ -204,6 +174,27 @@ status = "okay"; }; +/* On Pi-2 connector */ +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; + status = "disabled"; +}; + +/* On Euler connector */ +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins>; + status = "disabled"; +}; + +/* On Euler connector, RTS/CTS optional */ +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&uart4_pins>; + status = "disabled"; +}; + &usb_otg { dr_mode = "host"; status = "okay"; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi index 9d20e13f0c02..c48692b06e1f 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi @@ -1,49 +1,10 @@ -/* - * Copyright (c) 2017 Icenowy Zheng <icenowy@aosc.xyz> - * - * Based on sun50i-a64-pine64.dts, which is: - * Copyright (c) 2016 ARM Ltd. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright (c) 2017 Icenowy Zheng <icenowy@aosc.xyz> +// Based on sun50i-a64-pine64.dts, which is: +// Copyright (c) 2016 ARM Ltd. #include "sun50i-a64.dtsi" +#include "sun50i-a64-cpu-opp.dtsi" #include <dt-bindings/gpio/gpio.h> @@ -51,6 +12,22 @@ cpvdd-supply = <®_eldo1>; }; +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + +&cpu1 { + cpu-supply = <®_dcdc2>; +}; + +&cpu2 { + cpu-supply = <®_dcdc2>; +}; + +&cpu3 { + cpu-supply = <®_dcdc2>; +}; + &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins>; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts index 1069e7012c9c..f5df5f705b72 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts @@ -1,13 +1,11 @@ -/* - * Copyright (C) Harald Geyer <harald@ccbib.org> - * based on sun50i-a64-olinuxino.dts by Jagan Teki <jteki@openedev.com> - * - * SPDX-License-Identifier: (GPL-2.0 OR MIT) - */ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// Copyright (C) Harald Geyer <harald@ccbib.org> +// based on sun50i-a64-olinuxino.dts by Jagan Teki <jteki@openedev.com> /dts-v1/; #include "sun50i-a64.dtsi" +#include "sun50i-a64-cpu-opp.dtsi" #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> @@ -100,18 +98,57 @@ status = "okay"; }; +&de { + status = "okay"; +}; + +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + +&cpu1 { + cpu-supply = <®_dcdc2>; +}; + +&cpu2 { + cpu-supply = <®_dcdc2>; +}; + +&cpu3 { + cpu-supply = <®_dcdc2>; +}; + &ehci1 { status = "okay"; }; -/* The ANX6345 eDP-bridge is on i2c0. There is no linux (mainline) - * driver for this chip at the moment, the bootloader initializes it. - * However it can be accessed with the i2c-dev driver from user space. - */ &i2c0 { clock-frequency = <100000>; status = "okay"; + + anx6345: anx6345@38 { + compatible = "analogix,anx6345"; + reg = <0x38>; + reset-gpios = <&pio 3 24 GPIO_ACTIVE_LOW>; /* PD24 */ + dvdd25-supply = <®_dldo2>; + dvdd12-supply = <®_dldo3>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + anx6345_in: endpoint { + remote-endpoint = <&tcon0_out_anx6345>; + }; + }; + }; + }; +}; + +&mixer0 { + status = "okay"; }; &mmc0 { @@ -319,6 +356,20 @@ status = "okay"; }; +&tcon0 { + pinctrl-names = "default"; + pinctrl-0 = <&lcd_rgb666_pins>; + + status = "okay"; +}; + +&tcon0_out { + tcon0_out_anx6345: endpoint@0 { + reg = <0>; + remote-endpoint = <&anx6345_in>; + }; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pb_pins>; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi index 9cc9bdde81ac..862b47dc9dc9 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi @@ -1,46 +1,7 @@ -/* - * Copyright (C) 2016 ARM Ltd. - * based on the Allwinner H3 dtsi: - * Copyright (C) 2015 Jens Kuske <jenskuske@gmail.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright (C) 2016 ARM Ltd. +// based on the Allwinner H3 dtsi: +// Copyright (C) 2015 Jens Kuske <jenskuske@gmail.com> #include <dt-bindings/clock/sun50i-a64-ccu.h> #include <dt-bindings/clock/sun8i-de2.h> @@ -49,6 +10,7 @@ #include <dt-bindings/reset/sun50i-a64-ccu.h> #include <dt-bindings/reset/sun8i-de2.h> #include <dt-bindings/reset/sun8i-r-ccu.h> +#include <dt-bindings/thermal/thermal.h> / { interrupt-parent = <&gic>; @@ -89,6 +51,9 @@ reg = <0>; enable-method = "psci"; next-level-cache = <&L2>; + clocks = <&ccu 21>; + clock-names = "cpu"; + #cooling-cells = <2>; }; cpu1: cpu@1 { @@ -97,6 +62,9 @@ reg = <1>; enable-method = "psci"; next-level-cache = <&L2>; + clocks = <&ccu 21>; + clock-names = "cpu"; + #cooling-cells = <2>; }; cpu2: cpu@2 { @@ -105,6 +73,9 @@ reg = <2>; enable-method = "psci"; next-level-cache = <&L2>; + clocks = <&ccu 21>; + clock-names = "cpu"; + #cooling-cells = <2>; }; cpu3: cpu@3 { @@ -113,6 +84,9 @@ reg = <3>; enable-method = "psci"; next-level-cache = <&L2>; + clocks = <&ccu 21>; + clock-names = "cpu"; + #cooling-cells = <2>; }; L2: l2-cache { @@ -144,10 +118,10 @@ pmu { compatible = "arm,cortex-a53-pmu"; - interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; }; @@ -211,6 +185,69 @@ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; }; + thermal-zones { + cpu_thermal: cpu0-thermal { + /* milliseconds */ + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&ths 0>; + + cooling-maps { + map0 { + trip = <&cpu_alert0>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu_alert1>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + + trips { + cpu_alert0: cpu_alert0 { + /* milliCelsius */ + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_alert1: cpu_alert1 { + /* milliCelsius */ + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + cpu_crit: cpu_crit { + /* milliCelsius */ + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + gpu0_thermal: gpu0-thermal { + /* milliseconds */ + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&ths 1>; + }; + + gpu1_thermal: gpu1-thermal { + /* milliseconds */ + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&ths 2>; + }; + }; + soc { compatible = "simple-bus"; #address-cells = <1>; @@ -228,10 +265,10 @@ display_clocks: clock@0 { compatible = "allwinner,sun50i-a64-de2-clk"; reg = <0x0 0x100000>; - clocks = <&ccu CLK_DE>, - <&ccu CLK_BUS_DE>; - clock-names = "mod", - "bus"; + clocks = <&ccu CLK_BUS_DE>, + <&ccu CLK_DE>; + clock-names = "bus", + "mod"; resets = <&ccu RST_BUS_DE>; #clock-cells = <1>; #reset-cells = <1>; @@ -382,6 +419,12 @@ #address-cells = <1>; #size-cells = <0>; reg = <1>; + + tcon0_out_dsi: endpoint@1 { + reg = <1>; + remote-endpoint = <&dsi_in_tcon0>; + allwinner,tcon-channel = <1>; + }; }; }; }; @@ -485,6 +528,21 @@ sid: eeprom@1c14000 { compatible = "allwinner,sun50i-a64-sid"; reg = <0x1c14000 0x400>; + #address-cells = <1>; + #size-cells = <1>; + + ths_calibration: thermal-sensor-calibration@34 { + reg = <0x34 0x8>; + }; + }; + + crypto: crypto@1c15000 { + compatible = "allwinner,sun50i-a64-crypto"; + reg = <0x01c15000 0x1000>; + interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_CE>, <&ccu CLK_CE>; + clock-names = "bus", "mod"; + resets = <&ccu RST_BUS_CE>; }; usb_otg: usb@1c19000 { @@ -553,6 +611,7 @@ resets = <&ccu RST_BUS_OHCI1>, <&ccu RST_BUS_EHCI1>; phys = <&usbphy 1>; + phy-names = "usb"; status = "disabled"; }; @@ -564,6 +623,7 @@ <&ccu CLK_USB_OHCI1>; resets = <&ccu RST_BUS_OHCI1>; phys = <&usbphy 1>; + phy-names = "usb"; status = "disabled"; }; @@ -582,7 +642,7 @@ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&ccu 58>, <&osc24M>, <&rtc 0>; + clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&rtc 0>; clock-names = "apb", "hosc", "losc"; gpio-controller; #gpio-cells = <3>; @@ -799,6 +859,18 @@ status = "disabled"; }; + ths: thermal-sensor@1c25000 { + compatible = "allwinner,sun50i-a64-ths"; + reg = <0x01c25000 0x100>; + clocks = <&ccu CLK_BUS_THS>, <&ccu CLK_THS>; + clock-names = "bus", "mod"; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + resets = <&ccu RST_BUS_THS>; + nvmem-cells = <&ths_calibration>; + nvmem-cell-names = "calibration"; + #thermal-sensor-cells = <1>; + }; + uart0: serial@1c28000 { compatible = "snps,dw-apb-uart"; reg = <0x01c28000 0x400>; @@ -1003,6 +1075,37 @@ status = "disabled"; }; + dsi: dsi@1ca0000 { + compatible = "allwinner,sun50i-a64-mipi-dsi"; + reg = <0x01ca0000 0x1000>; + interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_MIPI_DSI>; + resets = <&ccu RST_BUS_MIPI_DSI>; + phys = <&dphy>; + phy-names = "dphy"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + + port { + dsi_in_tcon0: endpoint { + remote-endpoint = <&tcon0_out_dsi>; + }; + }; + }; + + dphy: d-phy@1ca1000 { + compatible = "allwinner,sun50i-a64-mipi-dphy", + "allwinner,sun6i-a31-mipi-dphy"; + reg = <0x01ca1000 0x1000>; + clocks = <&ccu CLK_BUS_MIPI_DSI>, + <&ccu CLK_DSI_DPHY>; + clock-names = "bus", "mod"; + resets = <&ccu RST_BUS_MIPI_DSI>; + status = "disabled"; + #phy-cells = <0>; + }; + hdmi: hdmi@1ee0000 { compatible = "allwinner,sun50i-a64-dw-hdmi", "allwinner,sun8i-a83t-dw-hdmi"; @@ -1015,7 +1118,7 @@ resets = <&ccu RST_BUS_HDMI1>; reset-names = "ctrl"; phys = <&hdmi_phy>; - phy-names = "hdmi-phy"; + phy-names = "phy"; status = "disabled"; ports { @@ -1040,7 +1143,7 @@ compatible = "allwinner,sun50i-a64-hdmi-phy"; reg = <0x01ef0000 0x10000>; clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_DDC>, - <&ccu 7>; + <&ccu CLK_PLL_VIDEO0>; clock-names = "bus", "mod", "pll-0"; resets = <&ccu RST_BUS_HDMI0>; reset-names = "phy"; @@ -1070,7 +1173,8 @@ r_ccu: clock@1f01400 { compatible = "allwinner,sun50i-a64-r-ccu"; reg = <0x01f01400 0x100>; - clocks = <&osc24M>, <&rtc 0>, <&rtc 2>, <&ccu 11>; + clocks = <&osc24M>, <&rtc 0>, <&rtc 2>, + <&ccu CLK_PLL_PERIPH0>; clock-names = "hosc", "losc", "iosc", "pll-periph"; #clock-cells = <1>; #reset-cells = <1>; @@ -1094,6 +1198,19 @@ #size-cells = <0>; }; + r_ir: ir@1f02000 { + compatible = "allwinner,sun50i-a64-ir", + "allwinner,sun6i-a31-ir"; + reg = <0x01f02000 0x400>; + clocks = <&r_ccu CLK_APB0_IR>, <&r_ccu CLK_IR>; + clock-names = "apb", "ir"; + resets = <&r_ccu RST_APB0_IR>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&r_ir_rx_pin>; + status = "disabled"; + }; + r_pwm: pwm@1f03800 { compatible = "allwinner,sun50i-a64-pwm", "allwinner,sun5i-a13-pwm"; @@ -1121,6 +1238,11 @@ function = "s_i2c"; }; + r_ir_rx_pin: r-ir-rx-pin { + pins = "PL11"; + function = "s_cir_rx"; + }; + r_pwm_pin: r-pwm-pin { pins = "PL10"; function = "s_pwm"; @@ -1151,6 +1273,7 @@ "allwinner,sun6i-a31-wdt"; reg = <0x01c20ca0 0x20>; interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&osc24M>; }; }; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5-devboard.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5-devboard.dts index c924090331d0..076a0b983101 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5-devboard.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5-devboard.dts @@ -1,8 +1,8 @@ // SPDX-License-Identifier: GPL-2.0-or-later OR MIT +// Copyright (C) 2018 Aleksandr Aleksandrov <aleksandr.aleksandrov@emlid.com> + /* * DTS for Emlid Neutis N5 Dev board. - * - * Copyright (C) 2018 Aleksandr Aleksandrov <aleksandr.aleksandrov@emlid.com> */ /dts-v1/; @@ -15,14 +15,6 @@ "emlid,neutis-n5", "allwinner,sun50i-h5"; - aliases { - serial0 = &uart0; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - connector { compatible = "hdmi-connector"; type = "a"; @@ -34,16 +26,6 @@ }; }; - reg_usb0_vbus: usb0-vbus { - compatible = "regulator-fixed"; - regulator-name = "usb0-vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - gpio = <&r_pio 0 9 GPIO_ACTIVE_HIGH>; /* PL9 */ - status = "okay"; - }; - vdd_cpux: gpio-regulator { compatible = "regulator-gpio"; regulator-name = "vdd-cpux"; @@ -59,33 +41,11 @@ }; }; -&codec { - allwinner,audio-routing = - "Line Out", "LINEOUT", - "LINEIN", "Line In", - "MIC1", "Mic", - "MIC2", "Mic", - "Mic", "MBIAS"; - status = "okay"; -}; - -&de { - status = "okay"; -}; - -&ehci0 { - status = "okay"; +&cpu0 { + cpu-supply = <&vdd_cpux>; }; -&ehci1 { - status = "okay"; -}; - -&ehci2 { - status = "okay"; -}; - -&ehci3 { +&codec { status = "okay"; }; @@ -106,42 +66,6 @@ }; }; -&mmc0 { - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ - status = "okay"; -}; - -&ohci0 { - status = "okay"; -}; - -&ohci1 { - status = "okay"; -}; - -&ohci2 { - status = "okay"; -}; - -&ohci3 { - status = "okay"; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pa_pins>; - status = "okay"; -}; - -&usb_otg { - dr_mode = "otg"; - status = "okay"; -}; - -&usbphy { - usb0_id_det-gpios = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */ - usb0_vbus-supply = <®_usb0_vbus>; +&i2c1 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5.dtsi index 82f4b44d525f..fc570011495f 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5.dtsi @@ -1,60 +1,11 @@ // SPDX-License-Identifier: GPL-2.0-or-later OR MIT +// Copyright (C) 2018 Aleksandr Aleksandrov <aleksandr.aleksandrov@emlid.com> + /* * DTSI for Emlid Neutis N5 SoM. - * - * Copyright (C) 2018 Aleksandr Aleksandrov <aleksandr.aleksandrov@emlid.com> */ /dts-v1/; #include "sun50i-h5.dtsi" - -#include <dt-bindings/gpio/gpio.h> - -/ { - reg_vcc3v3: vcc3v3 { - compatible = "regulator-fixed"; - regulator-name = "vcc3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - wifi_pwrseq: wifi_pwrseq { - compatible = "mmc-pwrseq-simple"; - reset-gpios = <&pio 2 7 GPIO_ACTIVE_LOW>; /* PC7 */ - post-power-on-delay-ms = <200>; - }; -}; - -&mmc1 { - vmmc-supply = <®_vcc3v3>; - vqmmc-supply = <®_vcc3v3>; - mmc-pwrseq = <&wifi_pwrseq>; - bus-width = <4>; - non-removable; - status = "okay"; - - brcmf: wifi@1 { - reg = <1>; - compatible = "brcm,bcm4329-fmac"; - interrupt-parent = <&r_pio>; - interrupts = <0 5 IRQ_TYPE_LEVEL_LOW>; /* PL5 */ - interrupt-names = "host-wake"; - }; -}; - -&mmc2 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc2_8bit_pins>; - vmmc-supply = <®_vcc3v3>; - bus-width = <8>; - non-removable; - cap-mmc-hw-reset; - status = "okay"; -}; - -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; - status = "okay"; -}; +#include <arm/sunxi-h3-h5-emlid-neutis.dtsi> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-libretech-all-h3-cc.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-libretech-all-h3-cc.dts index d68bdfea2271..64d35daf2023 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5-libretech-all-h3-cc.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-libretech-all-h3-cc.dts @@ -1,8 +1,6 @@ // SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (C) 2018 BayLibre, SAS - * Author: Neil Armstrong <narmstrong@baylibre.com> - */ +// Copyright (C) 2018 BayLibre, SAS +// Author: Neil Armstrong <narmstrong@baylibre.com> /dts-v1/; #include "sun50i-h5.dtsi" diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-libretech-all-h3-it.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-libretech-all-h3-it.dts new file mode 100644 index 000000000000..e59d68b525fc --- /dev/null +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-libretech-all-h3-it.dts @@ -0,0 +1,11 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright (C) 2019 Chen-Yu Tsai <wens@csie.org> + +/dts-v1/; +#include "sun50i-h5.dtsi" +#include <arm/sunxi-libretech-all-h3-it.dtsi> + +/ { + model = "Libre Computer Board ALL-H3-IT H5"; + compatible = "libretech,all-h3-it-h5", "allwinner,sun50i-h5"; +}; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-libretech-all-h5-cc.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-libretech-all-h5-cc.dts new file mode 100644 index 000000000000..df1b9263ad0e --- /dev/null +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-libretech-all-h5-cc.dts @@ -0,0 +1,61 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright (C) 2020 Chen-Yu Tsai <wens@csie.org> + +#include "sun50i-h5-libretech-all-h3-cc.dts" + +/ { + model = "Libre Computer Board ALL-H5-CC H5"; + compatible = "libretech,all-h5-cc-h5", "allwinner,sun50i-h5"; + + aliases { + spi0 = &spi0; + }; + + reg_gmac_3v3: gmac-3v3 { + compatible = "regulator-fixed"; + regulator-name = "gmac-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <5000>; + enable-active-high; + gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; + vin-supply = <®_vcc5v0>; + }; +}; + +&codec { + /* No line out; only onboard microphone */ + allwinner,audio-routing = + "MIC1", "Mic", + "Mic", "MBIAS"; +}; + +/* This board has external PHY */ +&emac { + pinctrl-names = "default"; + pinctrl-0 = <&emac_rgmii_pins>; + phy-supply = <®_gmac_3v3>; + phy-handle = <&ext_rgmii_phy>; + phy-mode = "rgmii"; + /delete-property/ allwinner,leds-active-low; + status = "okay"; +}; + +&external_mdio { + ext_rgmii_phy: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + }; +}; + +&spi0 { + status = "okay"; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; + }; +}; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo-plus2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo-plus2.dts index 1c7dde84e54d..4f9ba53ffaae 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo-plus2.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo-plus2.dts @@ -1,45 +1,6 @@ -/* - * Copyright (C) 2017 Antony Antony <antony@phenome.org> - * Copyright (C) 2016 ARM Ltd. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright (C) 2017 Antony Antony <antony@phenome.org> +// Copyright (C) 2016 ARM Ltd. /dts-v1/; #include "sun50i-h5.dtsi" diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts index 57a6f45036c1..b059e20813bd 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts @@ -1,44 +1,5 @@ -/* - * Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io> /dts-v1/; #include "sun50i-h5.dtsi" diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts index e126c1c9f05c..70b5f0998421 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts @@ -1,44 +1,5 @@ -/* - * Copyright (C) 2016 ARM Ltd. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright (C) 2016 ARM Ltd. /dts-v1/; #include "sun50i-h5.dtsi" diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts index d9b3ed257088..cb44bfa5981f 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts @@ -1,47 +1,7 @@ -/* - * Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.xyz> - * - * Based on sun50i-h5-orangepi-pc2.dts, which is: - * Copyright (C) 2016 ARM Ltd. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.xyz> +// Based on sun50i-h5-orangepi-pc2.dts, which is: +// Copyright (C) 2016 ARM Ltd. /dts-v1/; #include "sun50i-h5.dtsi" diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus.dts index db6ea7b58999..ef5ca6444220 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus.dts @@ -1,9 +1,6 @@ -/* - * Copyright (C) 2016 ARM Ltd. - * Copyright (C) 2018 Hauke Mehrtens <hauke@hauke-m.de> - * - * SPDX-License-Identifier: (GPL-2.0+ OR X11) - */ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright (C) 2016 ARM Ltd. +// Copyright (C) 2018 Hauke Mehrtens <hauke@hauke-m.de> /dts-v1/; #include "sun50i-h5.dtsi" diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts index dacf61399527..c95a68541309 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts @@ -1,44 +1,5 @@ -/* - * Copyright (C) 2017 Jagan Teki <jteki@openedev.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright (C) 2017 Jagan Teki <jteki@openedev.com> /dts-v1/; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi index f002a496d7cb..9893aa64dd0b 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi @@ -1,44 +1,5 @@ -/* - * Copyright (C) 2016 ARM Ltd. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright (C) 2016 ARM Ltd. #include <arm/sunxi-h3-h5.dtsi> @@ -54,21 +15,21 @@ enable-method = "psci"; }; - cpu@1 { + cpu1: cpu@1 { compatible = "arm,cortex-a53"; device_type = "cpu"; reg = <1>; enable-method = "psci"; }; - cpu@2 { + cpu2: cpu@2 { compatible = "arm,cortex-a53"; device_type = "cpu"; reg = <2>; enable-method = "psci"; }; - cpu@3 { + cpu3: cpu@3 { compatible = "arm,cortex-a53"; device_type = "cpu"; reg = <3>; @@ -76,6 +37,16 @@ }; }; + pmu { + compatible = "arm,cortex-a53-pmu", + "arm,armv8-pmuv3"; + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; + }; + psci { compatible = "arm,psci-0.2"; method = "smc"; @@ -127,6 +98,15 @@ allwinner,sram = <&ve_sram 1>; }; + crypto: crypto@1c15000 { + compatible = "allwinner,sun50i-h5-crypto"; + reg = <0x01c15000 0x1000>; + interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_CE>, <&ccu CLK_CE>; + clock-names = "bus", "mod"; + resets = <&ccu RST_BUS_CE>; + }; + mali: gpu@1e80000 { compatible = "allwinner,sun50i-h5-mali", "arm,mali-450"; reg = <0x01e80000 0x30000>; @@ -167,6 +147,32 @@ assigned-clocks = <&ccu CLK_GPU>; assigned-clock-rates = <384000000>; }; + + ths: thermal-sensor@1c25000 { + compatible = "allwinner,sun50i-h5-ths"; + reg = <0x01c25000 0x400>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + resets = <&ccu RST_BUS_THS>; + clocks = <&ccu CLK_BUS_THS>, <&ccu CLK_THS>; + clock-names = "bus", "mod"; + nvmem-cells = <&ths_calibration>; + nvmem-cell-names = "calibration"; + #thermal-sensor-cells = <1>; + }; + }; + + thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&ths 0>; + }; + + gpu_thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&ths 1>; + }; }; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts index 0dc33c90dd60..df6d872c34e2 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts @@ -1,7 +1,5 @@ -// SPDX-License-Identifier: (GPL-2.0+ or MIT) -/* - * Copyright (C) 2019 ClĂ©ment PĂ©ron <peron.clem@gmail.com> - */ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright (C) 2019 ClĂ©ment PĂ©ron <peron.clem@gmail.com> /dts-v1/; @@ -25,6 +23,7 @@ connector { compatible = "hdmi-connector"; type = "a"; + ddc-en-gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */ port { hdmi_con_in: endpoint { @@ -51,12 +50,34 @@ regulator-max-microvolt = <5000000>; regulator-always-on; }; + + sound-spdif { + compatible = "simple-audio-card"; + simple-audio-card,name = "sun50i-h6-spdif"; + + simple-audio-card,cpu { + sound-dai = <&spdif>; + }; + + simple-audio-card,codec { + sound-dai = <&spdif_out>; + }; + }; + + spdif_out: spdif-out { + #sound-dai-cells = <0>; + compatible = "linux,spdif-dit"; + }; }; &de { status = "okay"; }; +&dwc3 { + status = "okay"; +}; + &ehci0 { status = "okay"; }; @@ -70,6 +91,11 @@ status = "okay"; }; +&gpu { + mali-supply = <®_dcdcc>; + status = "okay"; +}; + &hdmi { status = "okay"; }; @@ -206,6 +232,7 @@ }; reg_dcdcc: dcdcc { + regulator-enable-ramp-delay = <32000>; regulator-min-microvolt = <810000>; regulator-max-microvolt = <1080000>; regulator-name = "vdd-gpu"; @@ -232,6 +259,11 @@ }; }; +&r_ir { + linux,rc-map-name = "rc-beelink-gs1"; + status = "okay"; +}; + &r_pio { /* * PL0 and PL1 are used for PMIC I2C @@ -243,6 +275,10 @@ vcc-pm-supply = <®_aldo1>; }; +&spdif { + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_ph_pins>; @@ -258,3 +294,7 @@ usb0_vbus-supply = <®_vcc5v>; status = "okay"; }; + +&usb3phy { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts index 17d496990108..c311eee52a35 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts @@ -1,7 +1,5 @@ -// SPDX-License-Identifier: (GPL-2.0+ or MIT) -/* - * Copyright (C) 2019 OndĹ™ej Jirman <megous@megous.com> - */ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright (C) 2019 OndĹ™ej Jirman <megous@megous.com> /dts-v1/; @@ -15,12 +13,25 @@ aliases { serial0 = &uart0; + serial1 = &uart1; }; chosen { stdout-path = "serial0:115200n8"; }; + connector { + compatible = "hdmi-connector"; + ddc-en-gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */ + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + leds { compatible = "gpio-leds"; @@ -44,12 +55,48 @@ regulator-max-microvolt = <5000000>; regulator-always-on; }; + + reg_vcc33_wifi: vcc33-wifi { + /* Always on 3.3V regulator for WiFi and BT */ + compatible = "regulator-fixed"; + regulator-name = "vcc33-wifi"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + vin-supply = <®_vcc5v>; + }; + + reg_vcc_wifi_io: vcc-wifi-io { + /* Always on 1.8V/300mA regulator for WiFi and BT IO */ + compatible = "regulator-fixed"; + regulator-name = "vcc-wifi-io"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + vin-supply = <®_vcc33_wifi>; + }; + + wifi_pwrseq: wifi-pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&rtc 1>; + clock-names = "ext_clock"; + reset-gpios = <&r_pio 1 3 GPIO_ACTIVE_LOW>; /* PM3 */ + post-power-on-delay-ms = <200>; + }; }; &cpu0 { cpu-supply = <®_dcdca>; }; +&de { + status = "okay"; +}; + +&dwc3 { + status = "okay"; +}; + &ehci0 { status = "okay"; }; @@ -58,6 +105,21 @@ status = "okay"; }; +&gpu { + mali-supply = <®_dcdcc>; + status = "okay"; +}; + +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + &mmc0 { vmmc-supply = <®_cldo1>; cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ @@ -65,6 +127,23 @@ status = "okay"; }; +&mmc1 { + vmmc-supply = <®_vcc33_wifi>; + vqmmc-supply = <®_vcc_wifi_io>; + mmc-pwrseq = <&wifi_pwrseq>; + bus-width = <4>; + non-removable; + status = "okay"; + + brcm: sdio-wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + interrupt-parent = <&r_pio>; + interrupts = <1 0 IRQ_TYPE_LEVEL_LOW>; /* PM0 */ + interrupt-names = "host-wake"; + }; +}; + &ohci0 { status = "okay"; }; @@ -76,6 +155,7 @@ &pio { vcc-pc-supply = <®_bldo2>; vcc-pd-supply = <®_cldo1>; + vcc-pg-supply = <®_vcc_wifi_io>; }; &r_i2c { @@ -165,6 +245,7 @@ }; reg_dcdcc: dcdcc { + regulator-enable-ramp-delay = <32000>; regulator-min-microvolt = <810000>; regulator-max-microvolt = <1080000>; regulator-name = "vdd-gpu"; @@ -191,12 +272,34 @@ }; }; +&r_ir { + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_ph_pins>; status = "okay"; }; +/* There's the BT part of the AP6256 connected to that UART */ +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; + uart-has-rtscts; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm4345c5"; + clocks = <&rtc 1>; + clock-names = "lpo"; + device-wakeup-gpios = <&r_pio 1 2 GPIO_ACTIVE_HIGH>; /* PM2 */ + host-wakeup-gpios = <&r_pio 1 1 GPIO_ACTIVE_HIGH>; /* PM1 */ + shutdown-gpios = <&r_pio 1 4 GPIO_ACTIVE_HIGH>; /* PM4 */ + max-speed = <1500000>; + }; +}; + &usb2otg { /* * This board doesn't have a controllable VBUS even though it @@ -213,3 +316,7 @@ usb3_vbus-supply = <®_vcc5v>; status = "okay"; }; + +&usb3phy { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-lite2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-lite2.dts index e098a2475f2d..e7ca75c0d0f7 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-lite2.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-lite2.dts @@ -1,7 +1,5 @@ -// SPDX-License-Identifier: (GPL-2.0+ or MIT) -/* - * Copyright (C) 2018 Jagan Teki <jagan@openedev.com> - */ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright (C) 2018 Jagan Teki <jagan@openedev.com> #include "sun50i-h6-orangepi.dtsi" diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-one-plus.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-one-plus.dts index 12e17567ab56..83aab7368889 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-one-plus.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-one-plus.dts @@ -1,8 +1,6 @@ -// SPDX-License-Identifier: (GPL-2.0+ or MIT) -/* - * Copyright (C) 2018 Amarula Solutions - * Author: Jagan Teki <jagan@amarulasolutions.com> - */ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright (C) 2018 Amarula Solutions +// Author: Jagan Teki <jagan@amarulasolutions.com> #include "sun50i-h6-orangepi.dtsi" diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi index 62e27948a3fa..37f4c57597d4 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi @@ -1,8 +1,6 @@ -// SPDX-License-Identifier: (GPL-2.0+ or MIT) -/* - * Copyright (C) 2018 Amarula Solutions - * Author: Jagan Teki <jagan@amarulasolutions.com> - */ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright (C) 2018 Amarula Solutions +// Author: Jagan Teki <jagan@amarulasolutions.com> /dts-v1/; @@ -55,6 +53,11 @@ status = "okay"; }; +&gpu { + mali-supply = <®_dcdcc>; + status = "okay"; +}; + &mmc0 { vmmc-supply = <®_cldo1>; cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; @@ -163,6 +166,7 @@ }; reg_dcdcc: dcdcc { + regulator-enable-ramp-delay = <32000>; regulator-min-microvolt = <810000>; regulator-max-microvolt = <1080000>; regulator-name = "vdd-gpu"; @@ -189,6 +193,10 @@ }; }; +&r_ir { + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_ph_pins>; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64-model-b.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64-model-b.dts new file mode 100644 index 000000000000..f4c8966a6497 --- /dev/null +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64-model-b.dts @@ -0,0 +1,21 @@ +// SPDX-License-Identifier: (GPL-2.0+ or MIT) +/* + * Copyright (C) 2019 Corentin LABBE <clabbe@baylibre.com> + */ + +#include "sun50i-h6-pine-h64.dts" + +/ { + model = "Pine H64 model B"; + compatible = "pine64,pine-h64-model-b", "allwinner,sun50i-h6"; + + /delete-node/ reg_gmac_3v3; +}; + +&hdmi_connector { + /delete-property/ ddc-en-gpios; +}; + +&emac { + phy-supply = <®_aldo2>; +}; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts index 189834518391..d1c2aa5b3a20 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts @@ -1,7 +1,5 @@ -// SPDX-License-Identifier: (GPL-2.0+ or MIT) -/* - * Copyright (c) 2017 Icenowy Zheng <icenowy@aosc.io> - */ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright (c) 2017 Icenowy Zheng <icenowy@aosc.io> /dts-v1/; @@ -10,7 +8,7 @@ #include <dt-bindings/gpio/gpio.h> / { - model = "Pine H64"; + model = "Pine H64 model A"; compatible = "pine64,pine-h64", "allwinner,sun50i-h6"; aliases { @@ -22,9 +20,10 @@ stdout-path = "serial0:115200n8"; }; - connector { + hdmi_connector: connector { compatible = "hdmi-connector"; type = "a"; + ddc-en-gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */ port { hdmi_con_in: endpoint { @@ -52,6 +51,16 @@ }; }; + reg_gmac_3v3: gmac-3v3 { + compatible = "regulator-fixed"; + regulator-name = "vcc-gmac-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <100000>; + gpio = <&pio 2 16 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + reg_usb_vbus: vbus { compatible = "regulator-fixed"; regulator-name = "usb-vbus"; @@ -68,7 +77,7 @@ pinctrl-0 = <&ext_rgmii_pins>; phy-mode = "rgmii"; phy-handle = <&ext_rgmii_phy>; - phy-supply = <®_aldo2>; + phy-supply = <®_gmac_3v3>; allwinner,rx-delay-ps = <200>; allwinner,tx-delay-ps = <200>; status = "okay"; @@ -85,6 +94,11 @@ status = "okay"; }; +&gpu { + mali-supply = <®_dcdcc>; + status = "okay"; +}; + &hdmi { status = "okay"; }; @@ -221,6 +235,7 @@ }; reg_dcdcc: dcdcc { + regulator-enable-ramp-delay = <32000>; regulator-min-microvolt = <810000>; regulator-max-microvolt = <1080000>; regulator-name = "vdd-gpu"; @@ -255,6 +270,10 @@ }; }; +&r_ir { + status = "okay"; +}; + &r_pio { vcc-pm-supply = <®_aldo1>; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts new file mode 100644 index 000000000000..83e6cb0e59ce --- /dev/null +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts @@ -0,0 +1,111 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright (c) 2019 Jernej Skrabec <jernej.skrabec@siol.net> + +/dts-v1/; + +#include "sun50i-h6.dtsi" + +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Tanix TX6"; + compatible = "oranth,tanix-tx6", "allwinner,sun50i-h6"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + connector { + compatible = "hdmi-connector"; + ddc-en-gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */ + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + + reg_vcc3v3: vcc3v3 { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +&de { + status = "okay"; +}; + +&dwc3 { + status = "okay"; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci3 { + status = "okay"; +}; + +&gpu { + status = "okay"; +}; + +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins>; + vmmc-supply = <®_vcc3v3>; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; + bus-width = <4>; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&ohci3 { + status = "okay"; +}; + +&r_ir { + linux,rc-map-name = "rc-tanix-tx5max"; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_ph_pins>; + status = "okay"; +}; + +&usb2otg { + dr_mode = "host"; + status = "okay"; +}; + +&usb2phy { + status = "okay"; +}; + +&usb3phy { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi index 7628a7c83096..3329283e38ab 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi @@ -1,7 +1,5 @@ -// SPDX-License-Identifier: (GPL-2.0+ or MIT) -/* - * Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io> - */ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/sun50i-h6-ccu.h> @@ -11,6 +9,7 @@ #include <dt-bindings/reset/sun50i-h6-ccu.h> #include <dt-bindings/reset/sun50i-h6-r-ccu.h> #include <dt-bindings/reset/sun8i-de2.h> +#include <dt-bindings/thermal/thermal.h> / { interrupt-parent = <&gic>; @@ -56,14 +55,6 @@ status = "disabled"; }; - iosc: internal-osc-clk { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <16000000>; - clock-accuracy = <300000000>; - clock-output-names = "iosc"; - }; - osc24M: osc24M_clk { #clock-cells = <0>; compatible = "fixed-clock"; @@ -71,11 +62,21 @@ clock-output-names = "osc24M"; }; - osc32k: osc32k_clk { + ext_osc32k: ext_osc32k_clk { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <32768>; - clock-output-names = "osc32k"; + clock-output-names = "ext_osc32k"; + }; + + pmu { + compatible = "arm,cortex-a53-pmu", + "arm,armv8-pmuv3"; + interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; }; psci { @@ -157,6 +158,29 @@ allwinner,sram = <&ve_sram 1>; }; + gpu: gpu@1800000 { + compatible = "allwinner,sun50i-h6-mali", + "arm,mali-t720"; + reg = <0x01800000 0x4000>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "job", "mmu", "gpu"; + clocks = <&ccu CLK_GPU>, <&ccu CLK_BUS_GPU>; + clock-names = "core", "bus"; + resets = <&ccu RST_BUS_GPU>; + status = "disabled"; + }; + + crypto: crypto@1904000 { + compatible = "allwinner,sun50i-h6-crypto"; + reg = <0x01904000 0x1000>; + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_CE>, <&ccu CLK_CE>, <&ccu CLK_MBUS_CE>; + clock-names = "bus", "mod", "ram"; + resets = <&ccu RST_BUS_CE>; + }; + syscon: syscon@3000000 { compatible = "allwinner,sun50i-h6-system-control", "allwinner,sun50i-a64-system-control"; @@ -197,7 +221,7 @@ ccu: clock@3001000 { compatible = "allwinner,sun50i-h6-ccu"; reg = <0x03001000 0x1000>; - clocks = <&osc24M>, <&osc32k>, <&iosc>; + clocks = <&osc24M>, <&rtc 0>, <&rtc 2>; clock-names = "hosc", "losc", "iosc"; #clock-cells = <1>; #reset-cells = <1>; @@ -215,9 +239,15 @@ #dma-cells = <1>; }; - sid: sid@3006000 { + sid: efuse@3006000 { compatible = "allwinner,sun50i-h6-sid"; reg = <0x03006000 0x400>; + #address-cells = <1>; + #size-cells = <1>; + + ths_calibration: thermal-sensor-calibration@14 { + reg = <0x14 0x8>; + }; }; watchdog: watchdog@30090a0 { @@ -225,10 +255,21 @@ "allwinner,sun6i-a31-wdt"; reg = <0x030090a0 0x20>; interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&osc24M>; /* Broken on some H6 boards */ status = "disabled"; }; + pwm: pwm@300a000 { + compatible = "allwinner,sun50i-h6-pwm"; + reg = <0x0300a000 0x400>; + clocks = <&osc24M>, <&ccu CLK_BUS_PWM>; + clock-names = "mod", "bus"; + resets = <&ccu RST_BUS_PWM>; + #pwm-cells = <3>; + status = "disabled"; + }; + pio: pinctrl@300b000 { compatible = "allwinner,sun50i-h6-pinctrl"; reg = <0x0300b000 0x400>; @@ -236,7 +277,7 @@ <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&ccu CLK_APB1>, <&osc24M>, <&osc32k>; + clocks = <&ccu CLK_APB1>, <&osc24M>, <&rtc 0>; clock-names = "apb", "hosc", "losc"; gpio-controller; #gpio-cells = <3>; @@ -256,6 +297,21 @@ function = "hdmi"; }; + i2c0_pins: i2c0-pins { + pins = "PD25", "PD26"; + function = "i2c0"; + }; + + i2c1_pins: i2c1-pins { + pins = "PH5", "PH6"; + function = "i2c1"; + }; + + i2c2_pins: i2c2-pins { + pins = "PD23", "PD24"; + function = "i2c2"; + }; + mmc0_pins: mmc0-pins { pins = "PF0", "PF1", "PF2", "PF3", "PF4", "PF5"; @@ -282,10 +338,25 @@ bias-pull-up; }; + spdif_tx_pin: spdif-tx-pin { + pins = "PH7"; + function = "spdif"; + }; + uart0_ph_pins: uart0-ph-pins { pins = "PH0", "PH1"; function = "uart0"; }; + + uart1_pins: uart1-pins { + pins = "PG6", "PG7"; + function = "uart1"; + }; + + uart1_rts_cts_pins: uart1-rts-cts-pins { + pins = "PG8", "PG9"; + function = "uart1"; + }; }; gic: interrupt-controller@3021000 { @@ -391,6 +462,48 @@ status = "disabled"; }; + i2c0: i2c@5002000 { + compatible = "allwinner,sun50i-h6-i2c", + "allwinner,sun6i-a31-i2c"; + reg = <0x05002000 0x400>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_I2C0>; + resets = <&ccu RST_BUS_I2C0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c1: i2c@5002400 { + compatible = "allwinner,sun50i-h6-i2c", + "allwinner,sun6i-a31-i2c"; + reg = <0x05002400 0x400>; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_I2C1>; + resets = <&ccu RST_BUS_I2C1>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c2: i2c@5002800 { + compatible = "allwinner,sun50i-h6-i2c", + "allwinner,sun6i-a31-i2c"; + reg = <0x05002800 0x400>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_I2C2>; + resets = <&ccu RST_BUS_I2C2>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + emac: ethernet@5020000 { compatible = "allwinner,sun50i-h6-emac", "allwinner,sun50i-a64-emac"; @@ -411,6 +524,21 @@ }; }; + spdif: spdif@5093000 { + #sound-dai-cells = <0>; + compatible = "allwinner,sun50i-h6-spdif"; + reg = <0x05093000 0x400>; + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_SPDIF>, <&ccu CLK_SPDIF>; + clock-names = "apb", "spdif"; + resets = <&ccu RST_BUS_SPDIF>; + dmas = <&dma 2>; + dma-names = "tx"; + pinctrl-names = "default"; + pinctrl-0 = <&spdif_tx_pin>; + status = "disabled"; + }; + usb2otg: usb@5100000 { compatible = "allwinner,sun50i-h6-musb", "allwinner,sun8i-a33-musb"; @@ -467,6 +595,38 @@ status = "disabled"; }; + dwc3: dwc3@5200000 { + compatible = "snps,dwc3"; + reg = <0x05200000 0x10000>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_XHCI>, + <&ccu CLK_BUS_XHCI>, + <&rtc 0>; + clock-names = "ref", "bus_early", "suspend"; + resets = <&ccu RST_BUS_XHCI>; + /* + * The datasheet of the chip doesn't declare the + * peripheral function, and there's no boards known + * to have a USB Type-B port routed to the port. + * In addition, no one has tested the peripheral + * function yet. + * So set the dr_mode to "host" in the DTSI file. + */ + dr_mode = "host"; + phys = <&usb3phy>; + phy-names = "usb3-phy"; + status = "disabled"; + }; + + usb3phy: phy@5210000 { + compatible = "allwinner,sun50i-h6-usb3-phy"; + reg = <0x5210000 0x10000>; + clocks = <&ccu CLK_USB_PHY1>; + resets = <&ccu RST_USB_PHY1>; + #phy-cells = <0>; + status = "disabled"; + }; + ehci3: usb@5311000 { compatible = "allwinner,sun50i-h6-ehci", "generic-ehci"; reg = <0x05311000 0x100>; @@ -477,6 +637,7 @@ resets = <&ccu RST_BUS_OHCI3>, <&ccu RST_BUS_EHCI3>; phys = <&usb2phy 3>; + phy-names = "usb"; status = "disabled"; }; @@ -488,6 +649,7 @@ <&ccu CLK_USB_OHCI3>; resets = <&ccu RST_BUS_OHCI3>; phys = <&usb2phy 3>; + phy-names = "usb"; status = "disabled"; }; @@ -504,7 +666,7 @@ resets = <&ccu RST_BUS_HDMI_SUB>, <&ccu RST_BUS_HDCP>; reset-names = "ctrl", "hdcp"; phys = <&hdmi_phy>; - phy-names = "hdmi-phy"; + phy-names = "phy"; pinctrl-names = "default"; pinctrl-0 = <&hdmi_pins>; status = "disabled"; @@ -546,7 +708,6 @@ "tcon-tv0"; clock-output-names = "tcon-top-tv0"; resets = <&ccu RST_BUS_TCON_TOP>; - reset-names = "rst"; #clock-cells = <1>; ports { @@ -633,10 +794,20 @@ }; }; + rtc: rtc@7000000 { + compatible = "allwinner,sun50i-h6-rtc"; + reg = <0x07000000 0x400>; + interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; + clock-output-names = "osc32k", "osc32k-out", "iosc"; + clocks = <&ext_osc32k>; + #clock-cells = <1>; + }; + r_ccu: clock@7010000 { compatible = "allwinner,sun50i-h6-r-ccu"; reg = <0x07010000 0x400>; - clocks = <&osc24M>, <&osc32k>, <&iosc>, + clocks = <&osc24M>, <&rtc 0>, <&rtc 2>, <&ccu CLK_PLL_PERIPH0>; clock-names = "hosc", "losc", "iosc", "pll-periph"; #clock-cells = <1>; @@ -648,6 +819,7 @@ "allwinner,sun6i-a31-wdt"; reg = <0x07020400 0x20>; interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&osc24M>; }; r_intc: interrupt-controller@7021000 { @@ -664,7 +836,7 @@ reg = <0x07022000 0x400>; interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&r_ccu CLK_R_APB1>, <&osc24M>, <&osc32k>; + clocks = <&r_ccu CLK_R_APB1>, <&osc24M>, <&rtc 0>; clock-names = "apb", "hosc", "losc"; gpio-controller; #gpio-cells = <3>; @@ -675,10 +847,30 @@ pins = "PL0", "PL1"; function = "s_i2c"; }; + + r_ir_rx_pin: r-ir-rx-pin { + pins = "PL9"; + function = "s_cir_rx"; + }; + }; + + r_ir: ir@7040000 { + compatible = "allwinner,sun50i-h6-ir", + "allwinner,sun6i-a31-ir"; + reg = <0x07040000 0x400>; + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&r_ccu CLK_R_APB1_IR>, + <&r_ccu CLK_IR>; + clock-names = "apb", "ir"; + resets = <&r_ccu RST_R_APB1_IR>; + pinctrl-names = "default"; + pinctrl-0 = <&r_ir_rx_pin>; + status = "disabled"; }; r_i2c: i2c@7081400 { - compatible = "allwinner,sun6i-a31-i2c"; + compatible = "allwinner,sun50i-h6-i2c", + "allwinner,sun6i-a31-i2c"; reg = <0x07081400 0x400>; interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; clocks = <&r_ccu CLK_R_APB2_I2C>; @@ -689,5 +881,31 @@ #address-cells = <1>; #size-cells = <0>; }; + + ths: thermal-sensor@5070400 { + compatible = "allwinner,sun50i-h6-ths"; + reg = <0x05070400 0x100>; + interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_THS>; + clock-names = "bus"; + resets = <&ccu RST_BUS_THS>; + nvmem-cells = <&ths_calibration>; + nvmem-cell-names = "calibration"; + #thermal-sensor-cells = <1>; + }; + }; + + thermal-zones { + cpu-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&ths 0>; + }; + + gpu-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&ths 1>; + }; }; }; diff --git a/arch/arm64/boot/dts/altera/Makefile b/arch/arm64/boot/dts/altera/Makefile index 27bb925adc8d..10119c7ab437 100644 --- a/arch/arm64/boot/dts/altera/Makefile +++ b/arch/arm64/boot/dts/altera/Makefile @@ -1,2 +1,3 @@ # SPDX-License-Identifier: GPL-2.0-only -dtb-$(CONFIG_ARCH_STRATIX10) += socfpga_stratix10_socdk.dtb +dtb-$(CONFIG_ARCH_STRATIX10) += socfpga_stratix10_socdk.dtb \ + socfpga_stratix10_socdk_nand.dtb diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi index b05d78164fc1..d1fc9c2055f4 100644 --- a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi +++ b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi @@ -61,10 +61,10 @@ pmu { compatible = "arm,armv8-pmuv3"; - interrupts = <0 120 8>, - <0 121 8>, - <0 122 8>, - <0 123 8>; + interrupts = <0 170 4>, + <0 171 4>, + <0 172 4>, + <0 173 4>; interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, @@ -302,6 +302,22 @@ status = "disabled"; }; + nand: nand@ffb90000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "altr,socfpga-denali-nand"; + reg = <0xffb90000 0x10000>, + <0xffb80000 0x1000>; + reg-names = "nand_data", "denali_reg"; + interrupts = <0 97 4>; + clocks = <&clkmgr STRATIX10_NAND_CLK>, + <&clkmgr STRATIX10_NAND_X_CLK>, + <&clkmgr STRATIX10_NAND_ECC_CLK>; + clock-names = "nand", "nand_x", "ecc"; + resets = <&rst NAND_RESET>, <&rst NAND_OCP_RESET>; + status = "disabled"; + }; + ocram: sram@ffe00000 { compatible = "mmio-sram"; reg = <0xffe00000 0x100000>; @@ -324,6 +340,8 @@ #dma-requests = <32>; clocks = <&clkmgr STRATIX10_L4_MAIN_CLK>; clock-names = "apb_pclk"; + resets = <&rst DMA_RESET>, <&rst DMA_OCP_RESET>; + reset-names = "dma", "dma-ocp"; }; rst: rstmgr@ffd11000 { diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts index 66e4ffb4e929..fb11ef05d556 100644 --- a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts +++ b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts @@ -178,12 +178,12 @@ qspi_boot: partition@0 { label = "Boot and fpga data"; - reg = <0x0 0x4000000>; + reg = <0x0 0x034B0000>; }; qspi_rootfs: partition@4000000 { label = "Root Filesystem - JFFS2"; - reg = <0x4000000 0x4000000>; + reg = <0x034B0000 0x0EB50000>; }; }; }; diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_nand.dts b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_nand.dts new file mode 100644 index 000000000000..9946515b8afd --- /dev/null +++ b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_nand.dts @@ -0,0 +1,223 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright Altera Corporation (C) 2015. All rights reserved. + */ + +#include "socfpga_stratix10.dtsi" + +/ { + model = "SoCFPGA Stratix 10 SoCDK"; + + aliases { + serial0 = &uart0; + ethernet0 = &gmac0; + ethernet1 = &gmac1; + ethernet2 = &gmac2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + hps0 { + label = "hps_led0"; + gpios = <&portb 20 GPIO_ACTIVE_HIGH>; + }; + + hps1 { + label = "hps_led1"; + gpios = <&portb 19 GPIO_ACTIVE_HIGH>; + }; + + hps2 { + label = "hps_led2"; + gpios = <&portb 21 GPIO_ACTIVE_HIGH>; + }; + }; + + memory { + device_type = "memory"; + /* We expect the bootloader to fill in the reg */ + reg = <0 0 0 0>; + }; + + ref_033v: 033-v-ref { + compatible = "regulator-fixed"; + regulator-name = "0.33V"; + regulator-min-microvolt = <330000>; + regulator-max-microvolt = <330000>; + }; + + soc { + clocks { + osc1 { + clock-frequency = <25000000>; + }; + }; + + eccmgr { + sdmmca-ecc@ff8c8c00 { + compatible = "altr,socfpga-s10-sdmmc-ecc", + "altr,socfpga-sdmmc-ecc"; + reg = <0xff8c8c00 0x100>; + altr,ecc-parent = <&mmc>; + interrupts = <14 4>, + <15 4>; + }; + }; + }; +}; + +&gpio1 { + status = "okay"; +}; + +&gmac2 { + status = "okay"; + phy-mode = "rgmii"; + phy-handle = <&phy0>; + + max-frame-size = <9000>; + + mdio0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + phy0: ethernet-phy@0 { + reg = <4>; + + txd0-skew-ps = <0>; /* -420ps */ + txd1-skew-ps = <0>; /* -420ps */ + txd2-skew-ps = <0>; /* -420ps */ + txd3-skew-ps = <0>; /* -420ps */ + rxd0-skew-ps = <420>; /* 0ps */ + rxd1-skew-ps = <420>; /* 0ps */ + rxd2-skew-ps = <420>; /* 0ps */ + rxd3-skew-ps = <420>; /* 0ps */ + txen-skew-ps = <0>; /* -420ps */ + txc-skew-ps = <900>; /* 0ps */ + rxdv-skew-ps = <420>; /* 0ps */ + rxc-skew-ps = <1680>; /* 780ps */ + }; + }; +}; + +&nand { + status = "okay"; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + reg = <0>; + nand-bus-width = <16>; + + partition@0 { + label = "u-boot"; + reg = <0 0x200000>; + }; + + partition@200000 { + label = "env"; + reg = <0x200000 0x40000>; + }; + + partition@240000 { + label = "dtb"; + reg = <0x240000 0x40000>; + }; + + partition@280000 { + label = "kernel"; + reg = <0x280000 0x2000000>; + }; + + partition@2280000 { + label = "misc"; + reg = <0x2280000 0x2000000>; + }; + + partition@4280000 { + label = "rootfs"; + reg = <0x4280000 0x3bd80000>; + }; + }; +}; + +&uart0 { + status = "okay"; +}; + +&usb0 { + status = "okay"; + disable-over-current; +}; + +&watchdog0 { + status = "okay"; +}; + +&i2c2 { + status = "okay"; + clock-frequency = <100000>; + i2c-sda-falling-time-ns = <890>; /* hcnt */ + i2c-sdl-falling-time-ns = <890>; /* lcnt */ + + adc@14 { + compatible = "lltc,ltc2497"; + reg = <0x14>; + vref-supply = <&ref_033v>; + }; + + temp@4c { + compatible = "maxim,max1619"; + reg = <0x4c>; + }; + + eeprom@51 { + compatible = "atmel,24c32"; + reg = <0x51>; + pagesize = <32>; + }; + + rtc@68 { + compatible = "dallas,ds1339"; + reg = <0x68>; + }; +}; + +&qspi { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "n25q00a"; + reg = <0>; + spi-max-frequency = <100000000>; + + m25p,fast-read; + cdns,page-size = <256>; + cdns,block-size = <16>; + cdns,read-delay = <1>; + cdns,tshsl-ns = <50>; + cdns,tsd2d-ns = <50>; + cdns,tchsh-ns = <4>; + cdns,tslch-ns = <4>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + qspi_boot: partition@0 { + label = "Boot and fpga data"; + reg = <0x0 0x034B0000>; + }; + + qspi_rootfs: partition@4000000 { + label = "Root Filesystem - JFFS2"; + reg = <0x034B0000 0x0EB50000>; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile index 07b861fe5fa5..eef0045320f2 100644 --- a/arch/arm64/boot/dts/amlogic/Makefile +++ b/arch/arm64/boot/dts/amlogic/Makefile @@ -3,7 +3,11 @@ dtb-$(CONFIG_ARCH_MESON) += meson-axg-s400.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12a-sei510.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12a-u200.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12a-x96-max.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-g12b-a311d-khadas-vim3.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-g12b-s922x-khadas-vim3.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12b-odroid-n2.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-g12b-ugoos-am6.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-kii-pro.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-nanopi-k2.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-nexbox-a95x.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-odroidc2.dtb @@ -26,9 +30,14 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-phicomm-n1.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s805x-p241.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905w-p281.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905w-tx3-mini.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-libretech-pc.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-khadas-vim2.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-nexbox-a1.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-q200.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-q201.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-rbox-pro.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-gxm-s912-libretech-pc.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-vega-s96.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-sm1-sei610.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-sm1-khadas-vim3l.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-a1-ad401.dtb diff --git a/arch/arm64/boot/dts/amlogic/meson-a1-ad401.dts b/arch/arm64/boot/dts/amlogic/meson-a1-ad401.dts new file mode 100644 index 000000000000..69c25c68c358 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-a1-ad401.dts @@ -0,0 +1,30 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 Amlogic, Inc. All rights reserved. + */ + +/dts-v1/; + +#include "meson-a1.dtsi" + +/ { + compatible = "amlogic,ad401", "amlogic,a1"; + model = "Amlogic Meson A1 AD401 Development Board"; + + aliases { + serial0 = &uart_AO_B; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x8000000>; + }; +}; + +&uart_AO_B { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-a1.dtsi b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi new file mode 100644 index 000000000000..4dec518c4dde --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi @@ -0,0 +1,155 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 Amlogic, Inc. All rights reserved. + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/gpio/meson-a1-gpio.h> + +/ { + compatible = "amlogic,a1"; + + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a35"; + reg = <0x0 0x0>; + enable-method = "psci"; + next-level-cache = <&l2>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a35"; + reg = <0x0 0x1>; + enable-method = "psci"; + next-level-cache = <&l2>; + }; + + l2: l2-cache0 { + compatible = "cache"; + }; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + linux,cma { + compatible = "shared-dma-pool"; + reusable; + size = <0x0 0x800000>; + alignment = <0x0 0x400000>; + linux,cma-default; + }; + }; + + sm: secure-monitor { + compatible = "amlogic,meson-gxbb-sm"; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + apb: bus@fe000000 { + compatible = "simple-bus"; + reg = <0x0 0xfe000000 0x0 0x1000000>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x1000000>; + + + reset: reset-controller@0 { + compatible = "amlogic,meson-a1-reset"; + reg = <0x0 0x0 0x0 0x8c>; + #reset-cells = <1>; + }; + + periphs_pinctrl: pinctrl@0400 { + compatible = "amlogic,meson-a1-periphs-pinctrl"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + gpio: bank@0400 { + reg = <0x0 0x0400 0x0 0x003c>, + <0x0 0x0480 0x0 0x0118>; + reg-names = "mux", "gpio"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&periphs_pinctrl 0 0 62>; + }; + + }; + + uart_AO: serial@1c00 { + compatible = "amlogic,meson-gx-uart", + "amlogic,meson-ao-uart"; + reg = <0x0 0x1c00 0x0 0x18>; + interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>; + clocks = <&xtal>, <&xtal>, <&xtal>; + clock-names = "xtal", "pclk", "baud"; + status = "disabled"; + }; + + uart_AO_B: serial@2000 { + compatible = "amlogic,meson-gx-uart", + "amlogic,meson-ao-uart"; + reg = <0x0 0x2000 0x0 0x18>; + interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>; + clocks = <&xtal>, <&xtal>, <&xtal>; + clock-names = "xtal", "pclk", "baud"; + status = "disabled"; + }; + }; + + gic: interrupt-controller@ff901000 { + compatible = "arm,gic-400"; + reg = <0x0 0xff901000 0x0 0x1000>, + <0x0 0xff902000 0x0 0x2000>, + <0x0 0xff904000 0x0 0x2000>, + <0x0 0xff906000 0x0 0x2000>; + interrupt-controller; + interrupts = <GIC_PPI 9 + (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>; + #interrupt-cells = <3>; + #address-cells = <0>; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 + (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 + (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 + (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 + (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>; + }; + + xtal: xtal-clk { + compatible = "fixed-clock"; + clock-frequency = <24000000>; + clock-output-names = "xtal"; + #clock-cells = <0>; + }; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi index 6219337033a0..aace3d32a3df 100644 --- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi @@ -117,6 +117,7 @@ #address-cells = <1>; #size-cells = <1>; read-only; + secure-monitor = <&sm>; }; psci { @@ -174,14 +175,16 @@ compatible = "amlogic,meson-axg-dwmac", "snps,dwmac-3.70a", "snps,dwmac"; - reg = <0x0 0xff3f0000 0x0 0x10000 - 0x0 0xff634540 0x0 0x8>; + reg = <0x0 0xff3f0000 0x0 0x10000>, + <0x0 0xff634540 0x0 0x8>; interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "macirq"; clocks = <&clkc CLKID_ETH>, <&clkc CLKID_FCLK_DIV2>, <&clkc CLKID_MPLL2>; clock-names = "stmmaceth", "clkin0", "clkin1"; + rx-fifo-depth = <4096>; + tx-fifo-depth = <2048>; status = "disabled"; }; @@ -1116,7 +1119,7 @@ }; mailbox: mailbox@ff63c404 { - compatible = "amlogic,meson-gx-mhu", "amlogic,meson-gxbb-mhu"; + compatible = "amlogic,meson-gxbb-mhu"; reg = <0 0xff63c404 0 0x4c>; interrupts = <GIC_SPI 208 IRQ_TYPE_EDGE_RISING>, <GIC_SPI 209 IRQ_TYPE_EDGE_RISING>, @@ -1160,67 +1163,73 @@ toddr_a: audio-controller@100 { compatible = "amlogic,axg-toddr"; - reg = <0x0 0x100 0x0 0x1c>; + reg = <0x0 0x100 0x0 0x2c>; #sound-dai-cells = <0>; sound-name-prefix = "TODDR_A"; interrupts = <GIC_SPI 84 IRQ_TYPE_EDGE_RISING>; clocks = <&clkc_audio AUD_CLKID_TODDR_A>; resets = <&arb AXG_ARB_TODDR_A>; + amlogic,fifo-depth = <512>; status = "disabled"; }; toddr_b: audio-controller@140 { compatible = "amlogic,axg-toddr"; - reg = <0x0 0x140 0x0 0x1c>; + reg = <0x0 0x140 0x0 0x2c>; #sound-dai-cells = <0>; sound-name-prefix = "TODDR_B"; interrupts = <GIC_SPI 85 IRQ_TYPE_EDGE_RISING>; clocks = <&clkc_audio AUD_CLKID_TODDR_B>; resets = <&arb AXG_ARB_TODDR_B>; + amlogic,fifo-depth = <256>; status = "disabled"; }; toddr_c: audio-controller@180 { compatible = "amlogic,axg-toddr"; - reg = <0x0 0x180 0x0 0x1c>; + reg = <0x0 0x180 0x0 0x2c>; #sound-dai-cells = <0>; sound-name-prefix = "TODDR_C"; interrupts = <GIC_SPI 86 IRQ_TYPE_EDGE_RISING>; clocks = <&clkc_audio AUD_CLKID_TODDR_C>; resets = <&arb AXG_ARB_TODDR_C>; + amlogic,fifo-depth = <256>; status = "disabled"; }; frddr_a: audio-controller@1c0 { compatible = "amlogic,axg-frddr"; - reg = <0x0 0x1c0 0x0 0x1c>; + reg = <0x0 0x1c0 0x0 0x2c>; #sound-dai-cells = <0>; sound-name-prefix = "FRDDR_A"; interrupts = <GIC_SPI 88 IRQ_TYPE_EDGE_RISING>; clocks = <&clkc_audio AUD_CLKID_FRDDR_A>; resets = <&arb AXG_ARB_FRDDR_A>; + amlogic,fifo-depth = <512>; status = "disabled"; }; frddr_b: audio-controller@200 { compatible = "amlogic,axg-frddr"; - reg = <0x0 0x200 0x0 0x1c>; + reg = <0x0 0x200 0x0 0x2c>; #sound-dai-cells = <0>; sound-name-prefix = "FRDDR_B"; interrupts = <GIC_SPI 89 IRQ_TYPE_EDGE_RISING>; clocks = <&clkc_audio AUD_CLKID_FRDDR_B>; resets = <&arb AXG_ARB_FRDDR_B>; + amlogic,fifo-depth = <256>; status = "disabled"; }; frddr_c: audio-controller@240 { compatible = "amlogic,axg-frddr"; - reg = <0x0 0x240 0x0 0x1c>; + reg = <0x0 0x240 0x0 0x2c>; #sound-dai-cells = <0>; sound-name-prefix = "FRDDR_C"; interrupts = <GIC_SPI 90 IRQ_TYPE_EDGE_RISING>; clocks = <&clkc_audio AUD_CLKID_FRDDR_C>; resets = <&arb AXG_ARB_FRDDR_C>; + amlogic,fifo-depth = <256>; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi new file mode 100644 index 000000000000..abe04f4ad7d8 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi @@ -0,0 +1,2275 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2018 Amlogic, Inc. All rights reserved. + */ + +#include <dt-bindings/phy/phy.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/clock/g12a-clkc.h> +#include <dt-bindings/clock/g12a-aoclkc.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/reset/amlogic,meson-g12a-reset.h> +#include <dt-bindings/thermal/thermal.h> + +/ { + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + simplefb_cvbs: framebuffer-cvbs { + compatible = "amlogic,simple-framebuffer", + "simple-framebuffer"; + amlogic,pipeline = "vpu-cvbs"; + clocks = <&clkc CLKID_HDMI>, + <&clkc CLKID_HTX_PCLK>, + <&clkc CLKID_VPU_INTR>; + status = "disabled"; + }; + + simplefb_hdmi: framebuffer-hdmi { + compatible = "amlogic,simple-framebuffer", + "simple-framebuffer"; + amlogic,pipeline = "vpu-hdmi"; + clocks = <&clkc CLKID_HDMI>, + <&clkc CLKID_HTX_PCLK>, + <&clkc CLKID_VPU_INTR>; + status = "disabled"; + }; + }; + + efuse: efuse { + compatible = "amlogic,meson-gxbb-efuse"; + clocks = <&clkc CLKID_EFUSE>; + #address-cells = <1>; + #size-cells = <1>; + read-only; + secure-monitor = <&sm>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + /* 3 MiB reserved for ARM Trusted Firmware (BL31) */ + secmon_reserved: secmon@5000000 { + reg = <0x0 0x05000000 0x0 0x300000>; + no-map; + }; + + linux,cma { + compatible = "shared-dma-pool"; + reusable; + size = <0x0 0x10000000>; + alignment = <0x0 0x400000>; + linux,cma-default; + }; + }; + + sm: secure-monitor { + compatible = "amlogic,meson-gxbb-sm"; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + pcie: pcie@fc000000 { + compatible = "amlogic,g12a-pcie", "snps,dw-pcie"; + reg = <0x0 0xfc000000 0x0 0x400000 + 0x0 0xff648000 0x0 0x2000 + 0x0 0xfc400000 0x0 0x200000>; + reg-names = "elbi", "cfg", "config"; + interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>; + bus-range = <0x0 0xff>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + ranges = <0x81000000 0 0 0x0 0xfc600000 0 0x00100000 + 0x82000000 0 0xfc700000 0x0 0xfc700000 0 0x1900000>; + + clocks = <&clkc CLKID_PCIE_PHY + &clkc CLKID_PCIE_COMB + &clkc CLKID_PCIE_PLL>; + clock-names = "general", + "pclk", + "port"; + resets = <&reset RESET_PCIE_CTRL_A>, + <&reset RESET_PCIE_APB>; + reset-names = "port", + "apb"; + num-lanes = <1>; + phys = <&usb3_pcie_phy PHY_TYPE_PCIE>; + phy-names = "pcie"; + status = "disabled"; + }; + + thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay = <1000>; + polling-delay-passive = <100>; + thermal-sensors = <&cpu_temp>; + + trips { + cpu_passive: cpu-passive { + temperature = <85000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "passive"; + }; + + cpu_hot: cpu-hot { + temperature = <95000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "hot"; + }; + + cpu_critical: cpu-critical { + temperature = <110000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "critical"; + }; + }; + }; + + ddr_thermal: ddr-thermal { + polling-delay = <1000>; + polling-delay-passive = <100>; + thermal-sensors = <&ddr_temp>; + + trips { + ddr_passive: ddr-passive { + temperature = <85000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "passive"; + }; + + ddr_critical: ddr-critical { + temperature = <110000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "critical"; + }; + }; + + cooling-maps { + map { + trip = <&ddr_passive>; + cooling-device = <&mali THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + }; + + ethmac: ethernet@ff3f0000 { + compatible = "amlogic,meson-axg-dwmac", + "snps,dwmac-3.70a", + "snps,dwmac"; + reg = <0x0 0xff3f0000 0x0 0x10000>, + <0x0 0xff634540 0x0 0x8>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq"; + clocks = <&clkc CLKID_ETH>, + <&clkc CLKID_FCLK_DIV2>, + <&clkc CLKID_MPLL2>; + clock-names = "stmmaceth", "clkin0", "clkin1"; + rx-fifo-depth = <4096>; + tx-fifo-depth = <2048>; + status = "disabled"; + + mdio0: mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + }; + }; + + apb: bus@ff600000 { + compatible = "simple-bus"; + reg = <0x0 0xff600000 0x0 0x200000>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0xff600000 0x0 0x200000>; + + hdmi_tx: hdmi-tx@0 { + compatible = "amlogic,meson-g12a-dw-hdmi"; + reg = <0x0 0x0 0x0 0x10000>; + interrupts = <GIC_SPI 57 IRQ_TYPE_EDGE_RISING>; + resets = <&reset RESET_HDMITX_CAPB3>, + <&reset RESET_HDMITX_PHY>, + <&reset RESET_HDMITX>; + reset-names = "hdmitx_apb", "hdmitx", "hdmitx_phy"; + clocks = <&clkc CLKID_HDMI>, + <&clkc CLKID_HTX_PCLK>, + <&clkc CLKID_VPU_INTR>; + clock-names = "isfr", "iahb", "venci"; + #address-cells = <1>; + #size-cells = <0>; + #sound-dai-cells = <0>; + status = "disabled"; + + /* VPU VENC Input */ + hdmi_tx_venc_port: port@0 { + reg = <0>; + + hdmi_tx_in: endpoint { + remote-endpoint = <&hdmi_tx_out>; + }; + }; + + /* TMDS Output */ + hdmi_tx_tmds_port: port@1 { + reg = <1>; + }; + }; + + apb_efuse: bus@30000 { + compatible = "simple-bus"; + reg = <0x0 0x30000 0x0 0x2000>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0x30000 0x0 0x2000>; + + hwrng: rng@218 { + compatible = "amlogic,meson-rng"; + reg = <0x0 0x218 0x0 0x4>; + }; + }; + + periphs: bus@34400 { + compatible = "simple-bus"; + reg = <0x0 0x34400 0x0 0x400>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0x34400 0x0 0x400>; + + periphs_pinctrl: pinctrl@40 { + compatible = "amlogic,meson-g12a-periphs-pinctrl"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + gpio: bank@40 { + reg = <0x0 0x40 0x0 0x4c>, + <0x0 0xe8 0x0 0x18>, + <0x0 0x120 0x0 0x18>, + <0x0 0x2c0 0x0 0x40>, + <0x0 0x340 0x0 0x1c>; + reg-names = "gpio", + "pull", + "pull-enable", + "mux", + "ds"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&periphs_pinctrl 0 0 86>; + }; + + cec_ao_a_h_pins: cec_ao_a_h { + mux { + groups = "cec_ao_a_h"; + function = "cec_ao_a_h"; + bias-disable; + }; + }; + + cec_ao_b_h_pins: cec_ao_b_h { + mux { + groups = "cec_ao_b_h"; + function = "cec_ao_b_h"; + bias-disable; + }; + }; + + emmc_pins: emmc { + mux-0 { + groups = "emmc_nand_d0", + "emmc_nand_d1", + "emmc_nand_d2", + "emmc_nand_d3", + "emmc_nand_d4", + "emmc_nand_d5", + "emmc_nand_d6", + "emmc_nand_d7", + "emmc_cmd"; + function = "emmc"; + bias-pull-up; + drive-strength-microamp = <4000>; + }; + + mux-1 { + groups = "emmc_clk"; + function = "emmc"; + bias-disable; + drive-strength-microamp = <4000>; + }; + }; + + emmc_ds_pins: emmc-ds { + mux { + groups = "emmc_nand_ds"; + function = "emmc"; + bias-pull-down; + drive-strength-microamp = <4000>; + }; + }; + + emmc_clk_gate_pins: emmc_clk_gate { + mux { + groups = "BOOT_8"; + function = "gpio_periphs"; + bias-pull-down; + drive-strength-microamp = <4000>; + }; + }; + + hdmitx_ddc_pins: hdmitx_ddc { + mux { + groups = "hdmitx_sda", + "hdmitx_sck"; + function = "hdmitx"; + bias-disable; + drive-strength-microamp = <4000>; + }; + }; + + hdmitx_hpd_pins: hdmitx_hpd { + mux { + groups = "hdmitx_hpd_in"; + function = "hdmitx"; + bias-disable; + }; + }; + + + i2c0_sda_c_pins: i2c0-sda-c { + mux { + groups = "i2c0_sda_c"; + function = "i2c0"; + bias-disable; + drive-strength-microamp = <3000>; + + }; + }; + + i2c0_sck_c_pins: i2c0-sck-c { + mux { + groups = "i2c0_sck_c"; + function = "i2c0"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c0_sda_z0_pins: i2c0-sda-z0 { + mux { + groups = "i2c0_sda_z0"; + function = "i2c0"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c0_sck_z1_pins: i2c0-sck-z1 { + mux { + groups = "i2c0_sck_z1"; + function = "i2c0"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c0_sda_z7_pins: i2c0-sda-z7 { + mux { + groups = "i2c0_sda_z7"; + function = "i2c0"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c0_sda_z8_pins: i2c0-sda-z8 { + mux { + groups = "i2c0_sda_z8"; + function = "i2c0"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c1_sda_x_pins: i2c1-sda-x { + mux { + groups = "i2c1_sda_x"; + function = "i2c1"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c1_sck_x_pins: i2c1-sck-x { + mux { + groups = "i2c1_sck_x"; + function = "i2c1"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c1_sda_h2_pins: i2c1-sda-h2 { + mux { + groups = "i2c1_sda_h2"; + function = "i2c1"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c1_sck_h3_pins: i2c1-sck-h3 { + mux { + groups = "i2c1_sck_h3"; + function = "i2c1"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c1_sda_h6_pins: i2c1-sda-h6 { + mux { + groups = "i2c1_sda_h6"; + function = "i2c1"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c1_sck_h7_pins: i2c1-sck-h7 { + mux { + groups = "i2c1_sck_h7"; + function = "i2c1"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c2_sda_x_pins: i2c2-sda-x { + mux { + groups = "i2c2_sda_x"; + function = "i2c2"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c2_sck_x_pins: i2c2-sck-x { + mux { + groups = "i2c2_sck_x"; + function = "i2c2"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c2_sda_z_pins: i2c2-sda-z { + mux { + groups = "i2c2_sda_z"; + function = "i2c2"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c2_sck_z_pins: i2c2-sck-z { + mux { + groups = "i2c2_sck_z"; + function = "i2c2"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c3_sda_h_pins: i2c3-sda-h { + mux { + groups = "i2c3_sda_h"; + function = "i2c3"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c3_sck_h_pins: i2c3-sck-h { + mux { + groups = "i2c3_sck_h"; + function = "i2c3"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c3_sda_a_pins: i2c3-sda-a { + mux { + groups = "i2c3_sda_a"; + function = "i2c3"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c3_sck_a_pins: i2c3-sck-a { + mux { + groups = "i2c3_sck_a"; + function = "i2c3"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + mclk0_a_pins: mclk0-a { + mux { + groups = "mclk0_a"; + function = "mclk0"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + mclk1_a_pins: mclk1-a { + mux { + groups = "mclk1_a"; + function = "mclk1"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + mclk1_x_pins: mclk1-x { + mux { + groups = "mclk1_x"; + function = "mclk1"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + mclk1_z_pins: mclk1-z { + mux { + groups = "mclk1_z"; + function = "mclk1"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + pdm_din0_a_pins: pdm-din0-a { + mux { + groups = "pdm_din0_a"; + function = "pdm"; + bias-disable; + }; + }; + + pdm_din0_c_pins: pdm-din0-c { + mux { + groups = "pdm_din0_c"; + function = "pdm"; + bias-disable; + }; + }; + + pdm_din0_x_pins: pdm-din0-x { + mux { + groups = "pdm_din0_x"; + function = "pdm"; + bias-disable; + }; + }; + + pdm_din0_z_pins: pdm-din0-z { + mux { + groups = "pdm_din0_z"; + function = "pdm"; + bias-disable; + }; + }; + + pdm_din1_a_pins: pdm-din1-a { + mux { + groups = "pdm_din1_a"; + function = "pdm"; + bias-disable; + }; + }; + + pdm_din1_c_pins: pdm-din1-c { + mux { + groups = "pdm_din1_c"; + function = "pdm"; + bias-disable; + }; + }; + + pdm_din1_x_pins: pdm-din1-x { + mux { + groups = "pdm_din1_x"; + function = "pdm"; + bias-disable; + }; + }; + + pdm_din1_z_pins: pdm-din1-z { + mux { + groups = "pdm_din1_z"; + function = "pdm"; + bias-disable; + }; + }; + + pdm_din2_a_pins: pdm-din2-a { + mux { + groups = "pdm_din2_a"; + function = "pdm"; + bias-disable; + }; + }; + + pdm_din2_c_pins: pdm-din2-c { + mux { + groups = "pdm_din2_c"; + function = "pdm"; + bias-disable; + }; + }; + + pdm_din2_x_pins: pdm-din2-x { + mux { + groups = "pdm_din2_x"; + function = "pdm"; + bias-disable; + }; + }; + + pdm_din2_z_pins: pdm-din2-z { + mux { + groups = "pdm_din2_z"; + function = "pdm"; + bias-disable; + }; + }; + + pdm_din3_a_pins: pdm-din3-a { + mux { + groups = "pdm_din3_a"; + function = "pdm"; + bias-disable; + }; + }; + + pdm_din3_c_pins: pdm-din3-c { + mux { + groups = "pdm_din3_c"; + function = "pdm"; + bias-disable; + }; + }; + + pdm_din3_x_pins: pdm-din3-x { + mux { + groups = "pdm_din3_x"; + function = "pdm"; + bias-disable; + }; + }; + + pdm_din3_z_pins: pdm-din3-z { + mux { + groups = "pdm_din3_z"; + function = "pdm"; + bias-disable; + }; + }; + + pdm_dclk_a_pins: pdm-dclk-a { + mux { + groups = "pdm_dclk_a"; + function = "pdm"; + bias-disable; + drive-strength-microamp = <500>; + }; + }; + + pdm_dclk_c_pins: pdm-dclk-c { + mux { + groups = "pdm_dclk_c"; + function = "pdm"; + bias-disable; + drive-strength-microamp = <500>; + }; + }; + + pdm_dclk_x_pins: pdm-dclk-x { + mux { + groups = "pdm_dclk_x"; + function = "pdm"; + bias-disable; + drive-strength-microamp = <500>; + }; + }; + + pdm_dclk_z_pins: pdm-dclk-z { + mux { + groups = "pdm_dclk_z"; + function = "pdm"; + bias-disable; + drive-strength-microamp = <500>; + }; + }; + + pwm_a_pins: pwm-a { + mux { + groups = "pwm_a"; + function = "pwm_a"; + bias-disable; + }; + }; + + pwm_b_x7_pins: pwm-b-x7 { + mux { + groups = "pwm_b_x7"; + function = "pwm_b"; + bias-disable; + }; + }; + + pwm_b_x19_pins: pwm-b-x19 { + mux { + groups = "pwm_b_x19"; + function = "pwm_b"; + bias-disable; + }; + }; + + pwm_c_c_pins: pwm-c-c { + mux { + groups = "pwm_c_c"; + function = "pwm_c"; + bias-disable; + }; + }; + + pwm_c_x5_pins: pwm-c-x5 { + mux { + groups = "pwm_c_x5"; + function = "pwm_c"; + bias-disable; + }; + }; + + pwm_c_x8_pins: pwm-c-x8 { + mux { + groups = "pwm_c_x8"; + function = "pwm_c"; + bias-disable; + }; + }; + + pwm_d_x3_pins: pwm-d-x3 { + mux { + groups = "pwm_d_x3"; + function = "pwm_d"; + bias-disable; + }; + }; + + pwm_d_x6_pins: pwm-d-x6 { + mux { + groups = "pwm_d_x6"; + function = "pwm_d"; + bias-disable; + }; + }; + + pwm_e_pins: pwm-e { + mux { + groups = "pwm_e"; + function = "pwm_e"; + bias-disable; + }; + }; + + pwm_f_x_pins: pwm-f-x { + mux { + groups = "pwm_f_x"; + function = "pwm_f"; + bias-disable; + }; + }; + + pwm_f_h_pins: pwm-f-h { + mux { + groups = "pwm_f_h"; + function = "pwm_f"; + bias-disable; + }; + }; + + sdcard_c_pins: sdcard_c { + mux-0 { + groups = "sdcard_d0_c", + "sdcard_d1_c", + "sdcard_d2_c", + "sdcard_d3_c", + "sdcard_cmd_c"; + function = "sdcard"; + bias-pull-up; + drive-strength-microamp = <4000>; + }; + + mux-1 { + groups = "sdcard_clk_c"; + function = "sdcard"; + bias-disable; + drive-strength-microamp = <4000>; + }; + }; + + sdcard_clk_gate_c_pins: sdcard_clk_gate_c { + mux { + groups = "GPIOC_4"; + function = "gpio_periphs"; + bias-pull-down; + drive-strength-microamp = <4000>; + }; + }; + + sdcard_z_pins: sdcard_z { + mux-0 { + groups = "sdcard_d0_z", + "sdcard_d1_z", + "sdcard_d2_z", + "sdcard_d3_z", + "sdcard_cmd_z"; + function = "sdcard"; + bias-pull-up; + drive-strength-microamp = <4000>; + }; + + mux-1 { + groups = "sdcard_clk_z"; + function = "sdcard"; + bias-disable; + drive-strength-microamp = <4000>; + }; + }; + + sdcard_clk_gate_z_pins: sdcard_clk_gate_z { + mux { + groups = "GPIOZ_6"; + function = "gpio_periphs"; + bias-pull-down; + drive-strength-microamp = <4000>; + }; + }; + + sdio_pins: sdio { + mux { + groups = "sdio_d0", + "sdio_d1", + "sdio_d2", + "sdio_d3", + "sdio_clk", + "sdio_cmd"; + function = "sdio"; + bias-disable; + drive-strength-microamp = <4000>; + }; + }; + + sdio_clk_gate_pins: sdio_clk_gate { + mux { + groups = "GPIOX_4"; + function = "gpio_periphs"; + bias-pull-down; + drive-strength-microamp = <4000>; + }; + }; + + spdif_in_a10_pins: spdif-in-a10 { + mux { + groups = "spdif_in_a10"; + function = "spdif_in"; + bias-disable; + }; + }; + + spdif_in_a12_pins: spdif-in-a12 { + mux { + groups = "spdif_in_a12"; + function = "spdif_in"; + bias-disable; + }; + }; + + spdif_in_h_pins: spdif-in-h { + mux { + groups = "spdif_in_h"; + function = "spdif_in"; + bias-disable; + }; + }; + + spdif_out_h_pins: spdif-out-h { + mux { + groups = "spdif_out_h"; + function = "spdif_out"; + drive-strength-microamp = <500>; + bias-disable; + }; + }; + + spdif_out_a11_pins: spdif-out-a11 { + mux { + groups = "spdif_out_a11"; + function = "spdif_out"; + drive-strength-microamp = <500>; + bias-disable; + }; + }; + + spdif_out_a13_pins: spdif-out-a13 { + mux { + groups = "spdif_out_a13"; + function = "spdif_out"; + drive-strength-microamp = <500>; + bias-disable; + }; + }; + + tdm_a_din0_pins: tdm-a-din0 { + mux { + groups = "tdm_a_din0"; + function = "tdm_a"; + bias-disable; + }; + }; + + + tdm_a_din1_pins: tdm-a-din1 { + mux { + groups = "tdm_a_din1"; + function = "tdm_a"; + bias-disable; + }; + }; + + tdm_a_dout0_pins: tdm-a-dout0 { + mux { + groups = "tdm_a_dout0"; + function = "tdm_a"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_a_dout1_pins: tdm-a-dout1 { + mux { + groups = "tdm_a_dout1"; + function = "tdm_a"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_a_fs_pins: tdm-a-fs { + mux { + groups = "tdm_a_fs"; + function = "tdm_a"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_a_sclk_pins: tdm-a-sclk { + mux { + groups = "tdm_a_sclk"; + function = "tdm_a"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_a_slv_fs_pins: tdm-a-slv-fs { + mux { + groups = "tdm_a_slv_fs"; + function = "tdm_a"; + bias-disable; + }; + }; + + + tdm_a_slv_sclk_pins: tdm-a-slv-sclk { + mux { + groups = "tdm_a_slv_sclk"; + function = "tdm_a"; + bias-disable; + }; + }; + + tdm_b_din0_pins: tdm-b-din0 { + mux { + groups = "tdm_b_din0"; + function = "tdm_b"; + bias-disable; + }; + }; + + tdm_b_din1_pins: tdm-b-din1 { + mux { + groups = "tdm_b_din1"; + function = "tdm_b"; + bias-disable; + }; + }; + + tdm_b_din2_pins: tdm-b-din2 { + mux { + groups = "tdm_b_din2"; + function = "tdm_b"; + bias-disable; + }; + }; + + tdm_b_din3_a_pins: tdm-b-din3-a { + mux { + groups = "tdm_b_din3_a"; + function = "tdm_b"; + bias-disable; + }; + }; + + tdm_b_din3_h_pins: tdm-b-din3-h { + mux { + groups = "tdm_b_din3_h"; + function = "tdm_b"; + bias-disable; + }; + }; + + tdm_b_dout0_pins: tdm-b-dout0 { + mux { + groups = "tdm_b_dout0"; + function = "tdm_b"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_b_dout1_pins: tdm-b-dout1 { + mux { + groups = "tdm_b_dout1"; + function = "tdm_b"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_b_dout2_pins: tdm-b-dout2 { + mux { + groups = "tdm_b_dout2"; + function = "tdm_b"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_b_dout3_a_pins: tdm-b-dout3-a { + mux { + groups = "tdm_b_dout3_a"; + function = "tdm_b"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_b_dout3_h_pins: tdm-b-dout3-h { + mux { + groups = "tdm_b_dout3_h"; + function = "tdm_b"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_b_fs_pins: tdm-b-fs { + mux { + groups = "tdm_b_fs"; + function = "tdm_b"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_b_sclk_pins: tdm-b-sclk { + mux { + groups = "tdm_b_sclk"; + function = "tdm_b"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_b_slv_fs_pins: tdm-b-slv-fs { + mux { + groups = "tdm_b_slv_fs"; + function = "tdm_b"; + bias-disable; + }; + }; + + tdm_b_slv_sclk_pins: tdm-b-slv-sclk { + mux { + groups = "tdm_b_slv_sclk"; + function = "tdm_b"; + bias-disable; + }; + }; + + tdm_c_din0_a_pins: tdm-c-din0-a { + mux { + groups = "tdm_c_din0_a"; + function = "tdm_c"; + bias-disable; + }; + }; + + tdm_c_din0_z_pins: tdm-c-din0-z { + mux { + groups = "tdm_c_din0_z"; + function = "tdm_c"; + bias-disable; + }; + }; + + tdm_c_din1_a_pins: tdm-c-din1-a { + mux { + groups = "tdm_c_din1_a"; + function = "tdm_c"; + bias-disable; + }; + }; + + tdm_c_din1_z_pins: tdm-c-din1-z { + mux { + groups = "tdm_c_din1_z"; + function = "tdm_c"; + bias-disable; + }; + }; + + tdm_c_din2_a_pins: tdm-c-din2-a { + mux { + groups = "tdm_c_din2_a"; + function = "tdm_c"; + bias-disable; + }; + }; + + eth_leds_pins: eth-leds { + mux { + groups = "eth_link_led", + "eth_act_led"; + function = "eth"; + bias-disable; + }; + }; + + eth_pins: eth { + mux { + groups = "eth_mdio", + "eth_mdc", + "eth_rgmii_rx_clk", + "eth_rx_dv", + "eth_rxd0", + "eth_rxd1", + "eth_txen", + "eth_txd0", + "eth_txd1"; + function = "eth"; + drive-strength-microamp = <4000>; + bias-disable; + }; + }; + + eth_rgmii_pins: eth-rgmii { + mux { + groups = "eth_rxd2_rgmii", + "eth_rxd3_rgmii", + "eth_rgmii_tx_clk", + "eth_txd2_rgmii", + "eth_txd3_rgmii"; + function = "eth"; + drive-strength-microamp = <4000>; + bias-disable; + }; + }; + + tdm_c_din2_z_pins: tdm-c-din2-z { + mux { + groups = "tdm_c_din2_z"; + function = "tdm_c"; + bias-disable; + }; + }; + + tdm_c_din3_a_pins: tdm-c-din3-a { + mux { + groups = "tdm_c_din3_a"; + function = "tdm_c"; + bias-disable; + }; + }; + + tdm_c_din3_z_pins: tdm-c-din3-z { + mux { + groups = "tdm_c_din3_z"; + function = "tdm_c"; + bias-disable; + }; + }; + + tdm_c_dout0_a_pins: tdm-c-dout0-a { + mux { + groups = "tdm_c_dout0_a"; + function = "tdm_c"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_c_dout0_z_pins: tdm-c-dout0-z { + mux { + groups = "tdm_c_dout0_z"; + function = "tdm_c"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_c_dout1_a_pins: tdm-c-dout1-a { + mux { + groups = "tdm_c_dout1_a"; + function = "tdm_c"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_c_dout1_z_pins: tdm-c-dout1-z { + mux { + groups = "tdm_c_dout1_z"; + function = "tdm_c"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_c_dout2_a_pins: tdm-c-dout2-a { + mux { + groups = "tdm_c_dout2_a"; + function = "tdm_c"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_c_dout2_z_pins: tdm-c-dout2-z { + mux { + groups = "tdm_c_dout2_z"; + function = "tdm_c"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_c_dout3_a_pins: tdm-c-dout3-a { + mux { + groups = "tdm_c_dout3_a"; + function = "tdm_c"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_c_dout3_z_pins: tdm-c-dout3-z { + mux { + groups = "tdm_c_dout3_z"; + function = "tdm_c"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_c_fs_a_pins: tdm-c-fs-a { + mux { + groups = "tdm_c_fs_a"; + function = "tdm_c"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_c_fs_z_pins: tdm-c-fs-z { + mux { + groups = "tdm_c_fs_z"; + function = "tdm_c"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_c_sclk_a_pins: tdm-c-sclk-a { + mux { + groups = "tdm_c_sclk_a"; + function = "tdm_c"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_c_sclk_z_pins: tdm-c-sclk-z { + mux { + groups = "tdm_c_sclk_z"; + function = "tdm_c"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_c_slv_fs_a_pins: tdm-c-slv-fs-a { + mux { + groups = "tdm_c_slv_fs_a"; + function = "tdm_c"; + bias-disable; + }; + }; + + tdm_c_slv_fs_z_pins: tdm-c-slv-fs-z { + mux { + groups = "tdm_c_slv_fs_z"; + function = "tdm_c"; + bias-disable; + }; + }; + + tdm_c_slv_sclk_a_pins: tdm-c-slv-sclk-a { + mux { + groups = "tdm_c_slv_sclk_a"; + function = "tdm_c"; + bias-disable; + }; + }; + + tdm_c_slv_sclk_z_pins: tdm-c-slv-sclk-z { + mux { + groups = "tdm_c_slv_sclk_z"; + function = "tdm_c"; + bias-disable; + }; + }; + + uart_a_pins: uart-a { + mux { + groups = "uart_a_tx", + "uart_a_rx"; + function = "uart_a"; + bias-disable; + }; + }; + + uart_a_cts_rts_pins: uart-a-cts-rts { + mux { + groups = "uart_a_cts", + "uart_a_rts"; + function = "uart_a"; + bias-disable; + }; + }; + + uart_b_pins: uart-b { + mux { + groups = "uart_b_tx", + "uart_b_rx"; + function = "uart_b"; + bias-disable; + }; + }; + + uart_c_pins: uart-c { + mux { + groups = "uart_c_tx", + "uart_c_rx"; + function = "uart_c"; + bias-disable; + }; + }; + + uart_c_cts_rts_pins: uart-c-cts-rts { + mux { + groups = "uart_c_cts", + "uart_c_rts"; + function = "uart_c"; + bias-disable; + }; + }; + }; + }; + + cpu_temp: temperature-sensor@34800 { + compatible = "amlogic,g12a-cpu-thermal", + "amlogic,g12a-thermal"; + reg = <0x0 0x34800 0x0 0x50>; + interrupts = <GIC_SPI 35 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc CLKID_TS>; + #thermal-sensor-cells = <0>; + amlogic,ao-secure = <&sec_AO>; + }; + + ddr_temp: temperature-sensor@34c00 { + compatible = "amlogic,g12a-ddr-thermal", + "amlogic,g12a-thermal"; + reg = <0x0 0x34c00 0x0 0x50>; + interrupts = <GIC_SPI 36 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc CLKID_TS>; + #thermal-sensor-cells = <0>; + amlogic,ao-secure = <&sec_AO>; + }; + + usb2_phy0: phy@36000 { + compatible = "amlogic,g12a-usb2-phy"; + reg = <0x0 0x36000 0x0 0x2000>; + clocks = <&xtal>; + clock-names = "xtal"; + resets = <&reset RESET_USB_PHY20>; + reset-names = "phy"; + #phy-cells = <0>; + }; + + dmc: bus@38000 { + compatible = "simple-bus"; + reg = <0x0 0x38000 0x0 0x400>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0x38000 0x0 0x400>; + + canvas: video-lut@48 { + compatible = "amlogic,canvas"; + reg = <0x0 0x48 0x0 0x14>; + }; + }; + + usb2_phy1: phy@3a000 { + compatible = "amlogic,g12a-usb2-phy"; + reg = <0x0 0x3a000 0x0 0x2000>; + clocks = <&xtal>; + clock-names = "xtal"; + resets = <&reset RESET_USB_PHY21>; + reset-names = "phy"; + #phy-cells = <0>; + }; + + hiu: bus@3c000 { + compatible = "simple-bus"; + reg = <0x0 0x3c000 0x0 0x1400>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0x3c000 0x0 0x1400>; + + hhi: system-controller@0 { + compatible = "amlogic,meson-gx-hhi-sysctrl", + "simple-mfd", "syscon"; + reg = <0 0 0 0x400>; + + clkc: clock-controller { + compatible = "amlogic,g12a-clkc"; + #clock-cells = <1>; + clocks = <&xtal>; + clock-names = "xtal"; + }; + + pwrc: power-controller { + compatible = "amlogic,meson-g12a-pwrc"; + #power-domain-cells = <1>; + amlogic,ao-sysctrl = <&rti>; + resets = <&reset RESET_VIU>, + <&reset RESET_VENC>, + <&reset RESET_VCBUS>, + <&reset RESET_BT656>, + <&reset RESET_RDMA>, + <&reset RESET_VENCI>, + <&reset RESET_VENCP>, + <&reset RESET_VDAC>, + <&reset RESET_VDI6>, + <&reset RESET_VENCL>, + <&reset RESET_VID_LOCK>; + reset-names = "viu", "venc", "vcbus", "bt656", + "rdma", "venci", "vencp", "vdac", + "vdi6", "vencl", "vid_lock"; + clocks = <&clkc CLKID_VPU>, + <&clkc CLKID_VAPB>; + clock-names = "vpu", "vapb"; + /* + * VPU clocking is provided by two identical clock paths + * VPU_0 and VPU_1 muxed to a single clock by a glitch + * free mux to safely change frequency while running. + * Same for VAPB but with a final gate after the glitch free mux. + */ + assigned-clocks = <&clkc CLKID_VPU_0_SEL>, + <&clkc CLKID_VPU_0>, + <&clkc CLKID_VPU>, /* Glitch free mux */ + <&clkc CLKID_VAPB_0_SEL>, + <&clkc CLKID_VAPB_0>, + <&clkc CLKID_VAPB_SEL>; /* Glitch free mux */ + assigned-clock-parents = <&clkc CLKID_FCLK_DIV3>, + <0>, /* Do Nothing */ + <&clkc CLKID_VPU_0>, + <&clkc CLKID_FCLK_DIV4>, + <0>, /* Do Nothing */ + <&clkc CLKID_VAPB_0>; + assigned-clock-rates = <0>, /* Do Nothing */ + <666666666>, + <0>, /* Do Nothing */ + <0>, /* Do Nothing */ + <250000000>, + <0>; /* Do Nothing */ + }; + }; + }; + + usb3_pcie_phy: phy@46000 { + compatible = "amlogic,g12a-usb3-pcie-phy"; + reg = <0x0 0x46000 0x0 0x2000>; + clocks = <&clkc CLKID_PCIE_PLL>; + clock-names = "ref_clk"; + resets = <&reset RESET_PCIE_PHY>; + reset-names = "phy"; + assigned-clocks = <&clkc CLKID_PCIE_PLL>; + assigned-clock-rates = <100000000>; + #phy-cells = <1>; + }; + + eth_phy: mdio-multiplexer@4c000 { + compatible = "amlogic,g12a-mdio-mux"; + reg = <0x0 0x4c000 0x0 0xa4>; + clocks = <&clkc CLKID_ETH_PHY>, + <&xtal>, + <&clkc CLKID_MPLL_50M>; + clock-names = "pclk", "clkin0", "clkin1"; + mdio-parent-bus = <&mdio0>; + #address-cells = <1>; + #size-cells = <0>; + + ext_mdio: mdio@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + int_mdio: mdio@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + internal_ephy: ethernet_phy@8 { + compatible = "ethernet-phy-id0180.3301", + "ethernet-phy-ieee802.3-c22"; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + reg = <8>; + max-speed = <100>; + }; + }; + }; + }; + + aobus: bus@ff800000 { + compatible = "simple-bus"; + reg = <0x0 0xff800000 0x0 0x100000>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0xff800000 0x0 0x100000>; + + rti: sys-ctrl@0 { + compatible = "amlogic,meson-gx-ao-sysctrl", + "simple-mfd", "syscon"; + reg = <0x0 0x0 0x0 0x100>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0x0 0x0 0x100>; + + clkc_AO: clock-controller { + compatible = "amlogic,meson-g12a-aoclkc"; + #clock-cells = <1>; + #reset-cells = <1>; + clocks = <&xtal>, <&clkc CLKID_CLK81>; + clock-names = "xtal", "mpeg-clk"; + }; + + ao_pinctrl: pinctrl@14 { + compatible = "amlogic,meson-g12a-aobus-pinctrl"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + gpio_ao: bank@14 { + reg = <0x0 0x14 0x0 0x8>, + <0x0 0x1c 0x0 0x8>, + <0x0 0x24 0x0 0x14>; + reg-names = "mux", + "ds", + "gpio"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&ao_pinctrl 0 0 15>; + }; + + i2c_ao_sck_pins: i2c_ao_sck_pins { + mux { + groups = "i2c_ao_sck"; + function = "i2c_ao"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c_ao_sda_pins: i2c_ao_sda { + mux { + groups = "i2c_ao_sda"; + function = "i2c_ao"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c_ao_sck_e_pins: i2c_ao_sck_e { + mux { + groups = "i2c_ao_sck_e"; + function = "i2c_ao"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c_ao_sda_e_pins: i2c_ao_sda_e { + mux { + groups = "i2c_ao_sda_e"; + function = "i2c_ao"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + mclk0_ao_pins: mclk0-ao { + mux { + groups = "mclk0_ao"; + function = "mclk0_ao"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_ao_b_din0_pins: tdm-ao-b-din0 { + mux { + groups = "tdm_ao_b_din0"; + function = "tdm_ao_b"; + bias-disable; + }; + }; + + spdif_ao_out_pins: spdif-ao-out { + mux { + groups = "spdif_ao_out"; + function = "spdif_ao_out"; + drive-strength-microamp = <500>; + bias-disable; + }; + }; + + tdm_ao_b_din1_pins: tdm-ao-b-din1 { + mux { + groups = "tdm_ao_b_din1"; + function = "tdm_ao_b"; + bias-disable; + }; + }; + + tdm_ao_b_din2_pins: tdm-ao-b-din2 { + mux { + groups = "tdm_ao_b_din2"; + function = "tdm_ao_b"; + bias-disable; + }; + }; + + tdm_ao_b_dout0_pins: tdm-ao-b-dout0 { + mux { + groups = "tdm_ao_b_dout0"; + function = "tdm_ao_b"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_ao_b_dout1_pins: tdm-ao-b-dout1 { + mux { + groups = "tdm_ao_b_dout1"; + function = "tdm_ao_b"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_ao_b_dout2_pins: tdm-ao-b-dout2 { + mux { + groups = "tdm_ao_b_dout2"; + function = "tdm_ao_b"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_ao_b_fs_pins: tdm-ao-b-fs { + mux { + groups = "tdm_ao_b_fs"; + function = "tdm_ao_b"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_ao_b_sclk_pins: tdm-ao-b-sclk { + mux { + groups = "tdm_ao_b_sclk"; + function = "tdm_ao_b"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_ao_b_slv_fs_pins: tdm-ao-b-slv-fs { + mux { + groups = "tdm_ao_b_slv_fs"; + function = "tdm_ao_b"; + bias-disable; + }; + }; + + tdm_ao_b_slv_sclk_pins: tdm-ao-b-slv-sclk { + mux { + groups = "tdm_ao_b_slv_sclk"; + function = "tdm_ao_b"; + bias-disable; + }; + }; + + uart_ao_a_pins: uart-a-ao { + mux { + groups = "uart_ao_a_tx", + "uart_ao_a_rx"; + function = "uart_ao_a"; + bias-disable; + }; + }; + + uart_ao_a_cts_rts_pins: uart-ao-a-cts-rts { + mux { + groups = "uart_ao_a_cts", + "uart_ao_a_rts"; + function = "uart_ao_a"; + bias-disable; + }; + }; + + pwm_a_e_pins: pwm-a-e { + mux { + groups = "pwm_a_e"; + function = "pwm_a_e"; + bias-disable; + }; + }; + + pwm_ao_a_pins: pwm-ao-a { + mux { + groups = "pwm_ao_a"; + function = "pwm_ao_a"; + bias-disable; + }; + }; + + pwm_ao_b_pins: pwm-ao-b { + mux { + groups = "pwm_ao_b"; + function = "pwm_ao_b"; + bias-disable; + }; + }; + + pwm_ao_c_4_pins: pwm-ao-c-4 { + mux { + groups = "pwm_ao_c_4"; + function = "pwm_ao_c"; + bias-disable; + }; + }; + + pwm_ao_c_6_pins: pwm-ao-c-6 { + mux { + groups = "pwm_ao_c_6"; + function = "pwm_ao_c"; + bias-disable; + }; + }; + + pwm_ao_d_5_pins: pwm-ao-d-5 { + mux { + groups = "pwm_ao_d_5"; + function = "pwm_ao_d"; + bias-disable; + }; + }; + + pwm_ao_d_10_pins: pwm-ao-d-10 { + mux { + groups = "pwm_ao_d_10"; + function = "pwm_ao_d"; + bias-disable; + }; + }; + + pwm_ao_d_e_pins: pwm-ao-d-e { + mux { + groups = "pwm_ao_d_e"; + function = "pwm_ao_d"; + }; + }; + + remote_input_ao_pins: remote-input-ao { + mux { + groups = "remote_ao_input"; + function = "remote_ao_input"; + bias-disable; + }; + }; + }; + }; + + vrtc: rtc@0a8 { + compatible = "amlogic,meson-vrtc"; + reg = <0x0 0x000a8 0x0 0x4>; + }; + + cec_AO: cec@100 { + compatible = "amlogic,meson-gx-ao-cec"; + reg = <0x0 0x00100 0x0 0x14>; + interrupts = <GIC_SPI 199 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_AO CLKID_AO_CEC>; + clock-names = "core"; + status = "disabled"; + }; + + sec_AO: ao-secure@140 { + compatible = "amlogic,meson-gx-ao-secure", "syscon"; + reg = <0x0 0x140 0x0 0x140>; + amlogic,has-chip-id; + }; + + cecb_AO: cec@280 { + compatible = "amlogic,meson-g12a-ao-cec"; + reg = <0x0 0x00280 0x0 0x1c>; + interrupts = <GIC_SPI 203 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_AO CLKID_AO_CTS_OSCIN>; + clock-names = "oscin"; + status = "disabled"; + }; + + pwm_AO_cd: pwm@2000 { + compatible = "amlogic,meson-g12a-ao-pwm-cd"; + reg = <0x0 0x2000 0x0 0x20>; + #pwm-cells = <3>; + status = "disabled"; + }; + + uart_AO: serial@3000 { + compatible = "amlogic,meson-gx-uart", + "amlogic,meson-ao-uart"; + reg = <0x0 0x3000 0x0 0x18>; + interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>; + clocks = <&xtal>, <&clkc_AO CLKID_AO_UART>, <&xtal>; + clock-names = "xtal", "pclk", "baud"; + status = "disabled"; + }; + + uart_AO_B: serial@4000 { + compatible = "amlogic,meson-gx-uart", + "amlogic,meson-ao-uart"; + reg = <0x0 0x4000 0x0 0x18>; + interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>; + clocks = <&xtal>, <&clkc_AO CLKID_AO_UART2>, <&xtal>; + clock-names = "xtal", "pclk", "baud"; + status = "disabled"; + }; + + i2c_AO: i2c@5000 { + compatible = "amlogic,meson-axg-i2c"; + status = "disabled"; + reg = <0x0 0x05000 0x0 0x20>; + interrupts = <GIC_SPI 195 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clkc CLKID_I2C>; + }; + + pwm_AO_ab: pwm@7000 { + compatible = "amlogic,meson-g12a-ao-pwm-ab"; + reg = <0x0 0x7000 0x0 0x20>; + #pwm-cells = <3>; + status = "disabled"; + }; + + ir: ir@8000 { + compatible = "amlogic,meson-gxbb-ir"; + reg = <0x0 0x8000 0x0 0x20>; + interrupts = <GIC_SPI 196 IRQ_TYPE_EDGE_RISING>; + status = "disabled"; + }; + + saradc: adc@9000 { + compatible = "amlogic,meson-g12a-saradc", + "amlogic,meson-saradc"; + reg = <0x0 0x9000 0x0 0x48>; + #io-channel-cells = <1>; + interrupts = <GIC_SPI 200 IRQ_TYPE_EDGE_RISING>; + clocks = <&xtal>, + <&clkc_AO CLKID_AO_SAR_ADC>, + <&clkc_AO CLKID_AO_SAR_ADC_CLK>, + <&clkc_AO CLKID_AO_SAR_ADC_SEL>; + clock-names = "clkin", "core", "adc_clk", "adc_sel"; + status = "disabled"; + }; + }; + + vdec: video-decoder@ff620000 { + compatible = "amlogic,g12a-vdec"; + reg = <0x0 0xff620000 0x0 0x10000>, + <0x0 0xffd0e180 0x0 0xe4>; + reg-names = "dos", "esparser"; + interrupts = <GIC_SPI 44 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 32 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "vdec", "esparser"; + + amlogic,ao-sysctrl = <&rti>; + amlogic,canvas = <&canvas>; + + clocks = <&clkc CLKID_PARSER>, + <&clkc CLKID_DOS>, + <&clkc CLKID_VDEC_1>, + <&clkc CLKID_VDEC_HEVC>, + <&clkc CLKID_VDEC_HEVCF>; + clock-names = "dos_parser", "dos", "vdec_1", + "vdec_hevc", "vdec_hevcf"; + resets = <&reset RESET_PARSER>; + reset-names = "esparser"; + }; + + vpu: vpu@ff900000 { + compatible = "amlogic,meson-g12a-vpu"; + reg = <0x0 0xff900000 0x0 0x100000>, + <0x0 0xff63c000 0x0 0x1000>; + reg-names = "vpu", "hhi"; + interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + amlogic,canvas = <&canvas>; + + /* CVBS VDAC output port */ + cvbs_vdac_port: port@0 { + reg = <0>; + }; + + /* HDMI-TX output port */ + hdmi_tx_port: port@1 { + reg = <1>; + + hdmi_tx_out: endpoint { + remote-endpoint = <&hdmi_tx_in>; + }; + }; + }; + + gic: interrupt-controller@ffc01000 { + compatible = "arm,gic-400"; + reg = <0x0 0xffc01000 0 0x1000>, + <0x0 0xffc02000 0 0x2000>, + <0x0 0xffc04000 0 0x2000>, + <0x0 0xffc06000 0 0x2000>; + interrupt-controller; + interrupts = <GIC_PPI 9 + (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>; + #interrupt-cells = <3>; + #address-cells = <0>; + }; + + cbus: bus@ffd00000 { + compatible = "simple-bus"; + reg = <0x0 0xffd00000 0x0 0x100000>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0xffd00000 0x0 0x100000>; + + reset: reset-controller@1004 { + compatible = "amlogic,meson-axg-reset"; + reg = <0x0 0x1004 0x0 0x9c>; + #reset-cells = <1>; + }; + + gpio_intc: interrupt-controller@f080 { + compatible = "amlogic,meson-g12a-gpio-intc", + "amlogic,meson-gpio-intc"; + reg = <0x0 0xf080 0x0 0x10>; + interrupt-controller; + #interrupt-cells = <2>; + amlogic,channel-interrupts = <64 65 66 67 68 69 70 71>; + }; + + pwm_ef: pwm@19000 { + compatible = "amlogic,meson-g12a-ee-pwm"; + reg = <0x0 0x19000 0x0 0x20>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm_cd: pwm@1a000 { + compatible = "amlogic,meson-g12a-ee-pwm"; + reg = <0x0 0x1a000 0x0 0x20>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm_ab: pwm@1b000 { + compatible = "amlogic,meson-g12a-ee-pwm"; + reg = <0x0 0x1b000 0x0 0x20>; + #pwm-cells = <3>; + status = "disabled"; + }; + + i2c3: i2c@1c000 { + compatible = "amlogic,meson-axg-i2c"; + status = "disabled"; + reg = <0x0 0x1c000 0x0 0x20>; + interrupts = <GIC_SPI 39 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clkc CLKID_I2C>; + }; + + i2c2: i2c@1d000 { + compatible = "amlogic,meson-axg-i2c"; + status = "disabled"; + reg = <0x0 0x1d000 0x0 0x20>; + interrupts = <GIC_SPI 215 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clkc CLKID_I2C>; + }; + + i2c1: i2c@1e000 { + compatible = "amlogic,meson-axg-i2c"; + status = "disabled"; + reg = <0x0 0x1e000 0x0 0x20>; + interrupts = <GIC_SPI 214 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clkc CLKID_I2C>; + }; + + i2c0: i2c@1f000 { + compatible = "amlogic,meson-axg-i2c"; + status = "disabled"; + reg = <0x0 0x1f000 0x0 0x20>; + interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clkc CLKID_I2C>; + }; + + clk_msr: clock-measure@18000 { + compatible = "amlogic,meson-g12a-clk-measure"; + reg = <0x0 0x18000 0x0 0x10>; + }; + + uart_C: serial@22000 { + compatible = "amlogic,meson-gx-uart"; + reg = <0x0 0x22000 0x0 0x18>; + interrupts = <GIC_SPI 93 IRQ_TYPE_EDGE_RISING>; + clocks = <&xtal>, <&clkc CLKID_UART2>, <&xtal>; + clock-names = "xtal", "pclk", "baud"; + status = "disabled"; + }; + + uart_B: serial@23000 { + compatible = "amlogic,meson-gx-uart"; + reg = <0x0 0x23000 0x0 0x18>; + interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>; + clocks = <&xtal>, <&clkc CLKID_UART1>, <&xtal>; + clock-names = "xtal", "pclk", "baud"; + status = "disabled"; + }; + + uart_A: serial@24000 { + compatible = "amlogic,meson-gx-uart"; + reg = <0x0 0x24000 0x0 0x18>; + interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>; + clocks = <&xtal>, <&clkc CLKID_UART0>, <&xtal>; + clock-names = "xtal", "pclk", "baud"; + status = "disabled"; + }; + }; + + sd_emmc_a: sd@ffe03000 { + compatible = "amlogic,meson-axg-mmc"; + reg = <0x0 0xffe03000 0x0 0x800>; + interrupts = <GIC_SPI 189 IRQ_TYPE_EDGE_RISING>; + status = "disabled"; + clocks = <&clkc CLKID_SD_EMMC_A>, + <&clkc CLKID_SD_EMMC_A_CLK0>, + <&clkc CLKID_FCLK_DIV2>; + clock-names = "core", "clkin0", "clkin1"; + resets = <&reset RESET_SD_EMMC_A>; + }; + + sd_emmc_b: sd@ffe05000 { + compatible = "amlogic,meson-axg-mmc"; + reg = <0x0 0xffe05000 0x0 0x800>; + interrupts = <GIC_SPI 190 IRQ_TYPE_EDGE_RISING>; + status = "disabled"; + clocks = <&clkc CLKID_SD_EMMC_B>, + <&clkc CLKID_SD_EMMC_B_CLK0>, + <&clkc CLKID_FCLK_DIV2>; + clock-names = "core", "clkin0", "clkin1"; + resets = <&reset RESET_SD_EMMC_B>; + }; + + sd_emmc_c: mmc@ffe07000 { + compatible = "amlogic,meson-axg-mmc"; + reg = <0x0 0xffe07000 0x0 0x800>; + interrupts = <GIC_SPI 191 IRQ_TYPE_EDGE_RISING>; + status = "disabled"; + clocks = <&clkc CLKID_SD_EMMC_C>, + <&clkc CLKID_SD_EMMC_C_CLK0>, + <&clkc CLKID_FCLK_DIV2>; + clock-names = "core", "clkin0", "clkin1"; + resets = <&reset RESET_SD_EMMC_C>; + }; + + usb: usb@ffe09000 { + status = "disabled"; + compatible = "amlogic,meson-g12a-usb-ctrl"; + reg = <0x0 0xffe09000 0x0 0xa0>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&clkc CLKID_USB>; + resets = <&reset RESET_USB>; + + dr_mode = "otg"; + + phys = <&usb2_phy0>, <&usb2_phy1>, + <&usb3_pcie_phy PHY_TYPE_USB3>; + phy-names = "usb2-phy0", "usb2-phy1", "usb3-phy0"; + + dwc2: usb@ff400000 { + compatible = "amlogic,meson-g12a-usb", "snps,dwc2"; + reg = <0x0 0xff400000 0x0 0x40000>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clkc CLKID_USB1_DDR_BRIDGE>; + clock-names = "ddr"; + phys = <&usb2_phy1>; + phy-names = "usb2-phy"; + dr_mode = "peripheral"; + g-rx-fifo-size = <192>; + g-np-tx-fifo-size = <128>; + g-tx-fifo-size = <128 128 16 16 16>; + }; + + dwc3: usb@ff500000 { + compatible = "snps,dwc3"; + reg = <0x0 0xff500000 0x0 0x100000>; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + dr_mode = "host"; + snps,dis_u2_susphy_quirk; + snps,quirk-frame-length-adjustment; + }; + }; + + mali: gpu@ffe40000 { + compatible = "amlogic,meson-g12a-mali", "arm,mali-bifrost"; + reg = <0x0 0xffe40000 0x0 0x40000>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "job", "mmu", "gpu"; + clocks = <&clkc CLKID_MALI>; + resets = <&reset RESET_DVALIN_CAPB3>, <&reset RESET_DVALIN>; + + /* + * Mali clocking is provided by two identical clock paths + * MALI_0 and MALI_1 muxed to a single clock by a glitch + * free mux to safely change frequency while running. + */ + assigned-clocks = <&clkc CLKID_MALI_0_SEL>, + <&clkc CLKID_MALI_0>, + <&clkc CLKID_MALI>; /* Glitch free mux */ + assigned-clock-parents = <&clkc CLKID_FCLK_DIV2P5>, + <0>, /* Do Nothing */ + <&clkc CLKID_MALI_0>; + assigned-clock-rates = <0>, /* Do Nothing */ + <800000000>, + <0>; /* Do Nothing */ + #cooling-cells = <2>; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 + (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 + (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 + (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 + (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>; + arm,no-tick-in-suspend; + }; + + xtal: xtal-clk { + compatible = "fixed-clock"; + clock-frequency = <24000000>; + clock-output-names = "xtal"; + #clock-cells = <0>; + }; + +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12.dtsi new file mode 100644 index 000000000000..03054c478896 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-g12.dtsi @@ -0,0 +1,398 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 BayLibre, SAS + * Author: Jerome Brunet <jbrunet@baylibre.com> + */ + +#include "meson-g12-common.dtsi" +#include <dt-bindings/clock/axg-audio-clkc.h> +#include <dt-bindings/power/meson-g12a-power.h> +#include <dt-bindings/reset/amlogic,meson-axg-audio-arb.h> +#include <dt-bindings/reset/amlogic,meson-g12a-audio-reset.h> + +/ { + tdmif_a: audio-controller-0 { + compatible = "amlogic,axg-tdm-iface"; + #sound-dai-cells = <0>; + sound-name-prefix = "TDM_A"; + clocks = <&clkc_audio AUD_CLKID_MST_A_MCLK>, + <&clkc_audio AUD_CLKID_MST_A_SCLK>, + <&clkc_audio AUD_CLKID_MST_A_LRCLK>; + clock-names = "mclk", "sclk", "lrclk"; + status = "disabled"; + }; + + tdmif_b: audio-controller-1 { + compatible = "amlogic,axg-tdm-iface"; + #sound-dai-cells = <0>; + sound-name-prefix = "TDM_B"; + clocks = <&clkc_audio AUD_CLKID_MST_B_MCLK>, + <&clkc_audio AUD_CLKID_MST_B_SCLK>, + <&clkc_audio AUD_CLKID_MST_B_LRCLK>; + clock-names = "mclk", "sclk", "lrclk"; + status = "disabled"; + }; + + tdmif_c: audio-controller-2 { + compatible = "amlogic,axg-tdm-iface"; + #sound-dai-cells = <0>; + sound-name-prefix = "TDM_C"; + clocks = <&clkc_audio AUD_CLKID_MST_C_MCLK>, + <&clkc_audio AUD_CLKID_MST_C_SCLK>, + <&clkc_audio AUD_CLKID_MST_C_LRCLK>; + clock-names = "mclk", "sclk", "lrclk"; + status = "disabled"; + }; +}; + +&apb { + pdm: audio-controller@40000 { + compatible = "amlogic,g12a-pdm", + "amlogic,axg-pdm"; + reg = <0x0 0x40000 0x0 0x34>; + #sound-dai-cells = <0>; + sound-name-prefix = "PDM"; + clocks = <&clkc_audio AUD_CLKID_PDM>, + <&clkc_audio AUD_CLKID_PDM_DCLK>, + <&clkc_audio AUD_CLKID_PDM_SYSCLK>; + clock-names = "pclk", "dclk", "sysclk"; + status = "disabled"; + }; + + audio: bus@42000 { + compatible = "simple-bus"; + reg = <0x0 0x42000 0x0 0x2000>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0x42000 0x0 0x2000>; + + clkc_audio: clock-controller@0 { + status = "disabled"; + compatible = "amlogic,g12a-audio-clkc"; + reg = <0x0 0x0 0x0 0xb4>; + #clock-cells = <1>; + #reset-cells = <1>; + + clocks = <&clkc CLKID_AUDIO>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>, + <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL3>, + <&clkc CLKID_HIFI_PLL>, + <&clkc CLKID_FCLK_DIV3>, + <&clkc CLKID_FCLK_DIV4>, + <&clkc CLKID_GP0_PLL>; + clock-names = "pclk", + "mst_in0", + "mst_in1", + "mst_in2", + "mst_in3", + "mst_in4", + "mst_in5", + "mst_in6", + "mst_in7"; + + resets = <&reset RESET_AUDIO>; + }; + + toddr_a: audio-controller@100 { + compatible = "amlogic,g12a-toddr", + "amlogic,axg-toddr"; + reg = <0x0 0x100 0x0 0x2c>; + #sound-dai-cells = <0>; + sound-name-prefix = "TODDR_A"; + interrupts = <GIC_SPI 148 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_audio AUD_CLKID_TODDR_A>; + resets = <&arb AXG_ARB_TODDR_A>, + <&clkc_audio AUD_RESET_TODDR_A>; + reset-names = "arb", "rst"; + amlogic,fifo-depth = <512>; + status = "disabled"; + }; + + toddr_b: audio-controller@140 { + compatible = "amlogic,g12a-toddr", + "amlogic,axg-toddr"; + reg = <0x0 0x140 0x0 0x2c>; + #sound-dai-cells = <0>; + sound-name-prefix = "TODDR_B"; + interrupts = <GIC_SPI 149 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_audio AUD_CLKID_TODDR_B>; + resets = <&arb AXG_ARB_TODDR_B>, + <&clkc_audio AUD_RESET_TODDR_B>; + reset-names = "arb", "rst"; + amlogic,fifo-depth = <256>; + status = "disabled"; + }; + + toddr_c: audio-controller@180 { + compatible = "amlogic,g12a-toddr", + "amlogic,axg-toddr"; + reg = <0x0 0x180 0x0 0x2c>; + #sound-dai-cells = <0>; + sound-name-prefix = "TODDR_C"; + interrupts = <GIC_SPI 150 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_audio AUD_CLKID_TODDR_C>; + resets = <&arb AXG_ARB_TODDR_C>, + <&clkc_audio AUD_RESET_TODDR_C>; + reset-names = "arb", "rst"; + amlogic,fifo-depth = <256>; + status = "disabled"; + }; + + frddr_a: audio-controller@1c0 { + compatible = "amlogic,g12a-frddr", + "amlogic,axg-frddr"; + reg = <0x0 0x1c0 0x0 0x2c>; + #sound-dai-cells = <0>; + sound-name-prefix = "FRDDR_A"; + interrupts = <GIC_SPI 152 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_audio AUD_CLKID_FRDDR_A>; + resets = <&arb AXG_ARB_FRDDR_A>, + <&clkc_audio AUD_RESET_FRDDR_A>; + reset-names = "arb", "rst"; + amlogic,fifo-depth = <512>; + status = "disabled"; + }; + + frddr_b: audio-controller@200 { + compatible = "amlogic,g12a-frddr", + "amlogic,axg-frddr"; + reg = <0x0 0x200 0x0 0x2c>; + #sound-dai-cells = <0>; + sound-name-prefix = "FRDDR_B"; + interrupts = <GIC_SPI 153 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_audio AUD_CLKID_FRDDR_B>; + resets = <&arb AXG_ARB_FRDDR_B>, + <&clkc_audio AUD_RESET_FRDDR_B>; + reset-names = "arb", "rst"; + amlogic,fifo-depth = <256>; + status = "disabled"; + }; + + frddr_c: audio-controller@240 { + compatible = "amlogic,g12a-frddr", + "amlogic,axg-frddr"; + reg = <0x0 0x240 0x0 0x2c>; + #sound-dai-cells = <0>; + sound-name-prefix = "FRDDR_C"; + interrupts = <GIC_SPI 154 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_audio AUD_CLKID_FRDDR_C>; + resets = <&arb AXG_ARB_FRDDR_C>, + <&clkc_audio AUD_RESET_FRDDR_C>; + reset-names = "arb", "rst"; + amlogic,fifo-depth = <256>; + status = "disabled"; + }; + + arb: reset-controller@280 { + status = "disabled"; + compatible = "amlogic,meson-axg-audio-arb"; + reg = <0x0 0x280 0x0 0x4>; + #reset-cells = <1>; + clocks = <&clkc_audio AUD_CLKID_DDR_ARB>; + }; + + tdmin_a: audio-controller@300 { + compatible = "amlogic,g12a-tdmin", + "amlogic,axg-tdmin"; + reg = <0x0 0x300 0x0 0x40>; + sound-name-prefix = "TDMIN_A"; + resets = <&clkc_audio AUD_RESET_TDMIN_A>; + clocks = <&clkc_audio AUD_CLKID_TDMIN_A>, + <&clkc_audio AUD_CLKID_TDMIN_A_SCLK>, + <&clkc_audio AUD_CLKID_TDMIN_A_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMIN_A_LRCLK>, + <&clkc_audio AUD_CLKID_TDMIN_A_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; + status = "disabled"; + }; + + tdmin_b: audio-controller@340 { + compatible = "amlogic,g12a-tdmin", + "amlogic,axg-tdmin"; + reg = <0x0 0x340 0x0 0x40>; + sound-name-prefix = "TDMIN_B"; + resets = <&clkc_audio AUD_RESET_TDMIN_B>; + clocks = <&clkc_audio AUD_CLKID_TDMIN_B>, + <&clkc_audio AUD_CLKID_TDMIN_B_SCLK>, + <&clkc_audio AUD_CLKID_TDMIN_B_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMIN_B_LRCLK>, + <&clkc_audio AUD_CLKID_TDMIN_B_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; + status = "disabled"; + }; + + tdmin_c: audio-controller@380 { + compatible = "amlogic,g12a-tdmin", + "amlogic,axg-tdmin"; + reg = <0x0 0x380 0x0 0x40>; + sound-name-prefix = "TDMIN_C"; + resets = <&clkc_audio AUD_RESET_TDMIN_C>; + clocks = <&clkc_audio AUD_CLKID_TDMIN_C>, + <&clkc_audio AUD_CLKID_TDMIN_C_SCLK>, + <&clkc_audio AUD_CLKID_TDMIN_C_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMIN_C_LRCLK>, + <&clkc_audio AUD_CLKID_TDMIN_C_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; + status = "disabled"; + }; + + tdmin_lb: audio-controller@3c0 { + compatible = "amlogic,g12a-tdmin", + "amlogic,axg-tdmin"; + reg = <0x0 0x3c0 0x0 0x40>; + sound-name-prefix = "TDMIN_LB"; + resets = <&clkc_audio AUD_RESET_TDMIN_LB>; + clocks = <&clkc_audio AUD_CLKID_TDMIN_LB>, + <&clkc_audio AUD_CLKID_TDMIN_LB_SCLK>, + <&clkc_audio AUD_CLKID_TDMIN_LB_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMIN_LB_LRCLK>, + <&clkc_audio AUD_CLKID_TDMIN_LB_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; + status = "disabled"; + }; + + spdifin: audio-controller@400 { + compatible = "amlogic,g12a-spdifin", + "amlogic,axg-spdifin"; + reg = <0x0 0x400 0x0 0x30>; + #sound-dai-cells = <0>; + sound-name-prefix = "SPDIFIN"; + interrupts = <GIC_SPI 151 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_audio AUD_CLKID_SPDIFIN>, + <&clkc_audio AUD_CLKID_SPDIFIN_CLK>; + clock-names = "pclk", "refclk"; + resets = <&clkc_audio AUD_RESET_SPDIFIN>; + status = "disabled"; + }; + + spdifout: audio-controller@480 { + compatible = "amlogic,g12a-spdifout", + "amlogic,axg-spdifout"; + reg = <0x0 0x480 0x0 0x50>; + #sound-dai-cells = <0>; + sound-name-prefix = "SPDIFOUT"; + clocks = <&clkc_audio AUD_CLKID_SPDIFOUT>, + <&clkc_audio AUD_CLKID_SPDIFOUT_CLK>; + clock-names = "pclk", "mclk"; + resets = <&clkc_audio AUD_RESET_SPDIFOUT>; + status = "disabled"; + }; + + tdmout_a: audio-controller@500 { + compatible = "amlogic,g12a-tdmout"; + reg = <0x0 0x500 0x0 0x40>; + sound-name-prefix = "TDMOUT_A"; + resets = <&clkc_audio AUD_RESET_TDMOUT_A>; + clocks = <&clkc_audio AUD_CLKID_TDMOUT_A>, + <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK>, + <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>, + <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; + status = "disabled"; + }; + + tdmout_b: audio-controller@540 { + compatible = "amlogic,g12a-tdmout"; + reg = <0x0 0x540 0x0 0x40>; + sound-name-prefix = "TDMOUT_B"; + resets = <&clkc_audio AUD_RESET_TDMOUT_B>; + clocks = <&clkc_audio AUD_CLKID_TDMOUT_B>, + <&clkc_audio AUD_CLKID_TDMOUT_B_SCLK>, + <&clkc_audio AUD_CLKID_TDMOUT_B_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMOUT_B_LRCLK>, + <&clkc_audio AUD_CLKID_TDMOUT_B_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; + status = "disabled"; + }; + + tdmout_c: audio-controller@580 { + compatible = "amlogic,g12a-tdmout"; + reg = <0x0 0x580 0x0 0x40>; + sound-name-prefix = "TDMOUT_C"; + resets = <&clkc_audio AUD_RESET_TDMOUT_C>; + clocks = <&clkc_audio AUD_CLKID_TDMOUT_C>, + <&clkc_audio AUD_CLKID_TDMOUT_C_SCLK>, + <&clkc_audio AUD_CLKID_TDMOUT_C_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMOUT_C_LRCLK>, + <&clkc_audio AUD_CLKID_TDMOUT_C_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; + status = "disabled"; + }; + + spdifout_b: audio-controller@680 { + compatible = "amlogic,g12a-spdifout", + "amlogic,axg-spdifout"; + reg = <0x0 0x680 0x0 0x50>; + #sound-dai-cells = <0>; + sound-name-prefix = "SPDIFOUT_B"; + clocks = <&clkc_audio AUD_CLKID_SPDIFOUT_B>, + <&clkc_audio AUD_CLKID_SPDIFOUT_B_CLK>; + clock-names = "pclk", "mclk"; + resets = <&clkc_audio AUD_RESET_SPDIFOUT_B>; + status = "disabled"; + }; + + tohdmitx: audio-controller@744 { + compatible = "amlogic,g12a-tohdmitx"; + reg = <0x0 0x744 0x0 0x4>; + #sound-dai-cells = <1>; + sound-name-prefix = "TOHDMITX"; + resets = <&clkc_audio AUD_RESET_TOHDMITX>; + status = "disabled"; + }; + }; +}; + +&cpu_thermal { + cooling-maps { + map0 { + trip = <&cpu_passive>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu100 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu101 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu102 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu103 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu_hot>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu100 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu101 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu102 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu103 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; +}; + +ðmac { + power-domains = <&pwrc PWRC_G12A_ETH_ID>; +}; + +&vpu { + power-domains = <&pwrc PWRC_G12A_VPU_ID>; +}; + +&sd_emmc_a { + amlogic,dram-access-quirk; +}; + +&simplefb_cvbs { + power-domains = <&pwrc PWRC_G12A_VPU_ID>; +}; + +&simplefb_hdmi { + power-domains = <&pwrc PWRC_G12A_VPU_ID>; +}; + diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts index c7a87368850b..2ac9e3a43b96 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts @@ -129,6 +129,25 @@ enable-active-high; }; + vddcpu: regulator-vddcpu { + /* + * SY8120B1ABC DC/DC Regulator. + */ + compatible = "pwm-regulator"; + + regulator-name = "VDDCPU"; + regulator-min-microvolt = <721000>; + regulator-max-microvolt = <1022000>; + + vin-supply = <&dc_in>; + + pwms = <&pwm_AO_cd 1 1250 0>; + pwm-dutycycle-range = <100 0>; + + regulator-boot-on; + regulator-always-on; + }; + vddio_ao1v8: regulator-vddio_ao1v8 { compatible = "regulator-fixed"; regulator-name = "VDDIO_AO1V8"; @@ -297,6 +316,34 @@ status = "okay"; }; +&cpu0 { + cpu-supply = <&vddcpu>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPU_CLK>; + clock-latency = <50000>; +}; + +&cpu1 { + cpu-supply = <&vddcpu>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPU_CLK>; + clock-latency = <50000>; +}; + +&cpu2 { + cpu-supply = <&vddcpu>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPU_CLK>; + clock-latency = <50000>; +}; + +&cpu3 { + cpu-supply = <&vddcpu>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPU_CLK>; + clock-latency = <50000>; +}; + &cvbs_vdac_port { cvbs_vdac_out: endpoint { remote-endpoint = <&cvbs_connector_in>; @@ -339,6 +386,20 @@ pinctrl-names = "default"; }; +&ir { + status = "okay"; + pinctrl-0 = <&remote_input_ao_pins>; + pinctrl-names = "default"; +}; + +&pwm_AO_cd { + pinctrl-0 = <&pwm_ao_d_e_pins>; + pinctrl-names = "default"; + clocks = <&xtal>; + clock-names = "clkin1"; + status = "okay"; +}; + &pwm_ef { status = "okay"; pinctrl-0 = <&pwm_e_pins>; @@ -377,6 +438,9 @@ non-removable; disable-wp; + /* WiFi firmware requires power to be kept while in suspend */ + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; vmmc-supply = <&vddao_3v3>; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts index 8551fbd4a488..2a324f0136e3 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts @@ -129,6 +129,24 @@ regulator-always-on; }; + vddcpu: regulator-vddcpu { + /* + * MP8756GD Regulator. + */ + compatible = "pwm-regulator"; + + regulator-name = "VDDCPU"; + regulator-min-microvolt = <721000>; + regulator-max-microvolt = <1022000>; + + vin-supply = <&main_12v>; + + pwms = <&pwm_AO_cd 1 1250 0>; + pwm-dutycycle-range = <100 0>; + + regulator-boot-on; + regulator-always-on; + }; }; &cec_AO { @@ -145,6 +163,34 @@ hdmi-phandle = <&hdmi_tx>; }; +&cpu0 { + cpu-supply = <&vddcpu>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPU_CLK>; + clock-latency = <50000>; +}; + +&cpu1 { + cpu-supply = <&vddcpu>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPU_CLK>; + clock-latency = <50000>; +}; + +&cpu2 { + cpu-supply = <&vddcpu>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPU_CLK>; + clock-latency = <50000>; +}; + +&cpu3 { + cpu-supply = <&vddcpu>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPU_CLK>; + clock-latency = <50000>; +}; + &cvbs_vdac_port { cvbs_vdac_out: endpoint { remote-endpoint = <&cvbs_connector_in>; @@ -197,6 +243,14 @@ pinctrl-names = "default"; }; +&pwm_AO_cd { + pinctrl-0 = <&pwm_ao_d_e_pins>; + pinctrl-names = "default"; + clocks = <&xtal>; + clock-names = "clkin1"; + status = "okay"; +}; + /* SD card */ &sd_emmc_b { status = "okay"; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts index fe4013cca876..4f2596d82989 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts @@ -11,7 +11,7 @@ #include <dt-bindings/sound/meson-g12a-tohdmitx.h> / { - compatible = "amediatech,x96-max", "amlogic,u200", "amlogic,g12a"; + compatible = "amediatech,x96-max", "amlogic,g12a"; model = "Shenzhen Amediatech Technology Co., Ltd X96 Max"; aliases { @@ -132,6 +132,22 @@ regulator-always-on; }; + vddcpu: regulator-vddcpu { + compatible = "pwm-regulator"; + + regulator-name = "VDDCPU"; + regulator-min-microvolt = <721000>; + regulator-max-microvolt = <1022000>; + + vin-supply = <&dc_in>; + + pwms = <&pwm_AO_cd 1 1250 0>; + pwm-dutycycle-range = <100 0>; + + regulator-boot-on; + regulator-always-on; + }; + sound { compatible = "amlogic,axg-sound-card"; model = "G12A-X96-MAX"; @@ -242,6 +258,34 @@ status = "okay"; }; +&cpu0 { + cpu-supply = <&vddcpu>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPU_CLK>; + clock-latency = <50000>; +}; + +&cpu1 { + cpu-supply = <&vddcpu>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPU_CLK>; + clock-latency = <50000>; +}; + +&cpu2 { + cpu-supply = <&vddcpu>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPU_CLK>; + clock-latency = <50000>; +}; + +&cpu3 { + cpu-supply = <&vddcpu>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPU_CLK>; + clock-latency = <50000>; +}; + &cvbs_vdac_port { cvbs_vdac_out: endpoint { remote-endpoint = <&cvbs_connector_in>; @@ -277,6 +321,15 @@ status = "okay"; pinctrl-0 = <&remote_input_ao_pins>; pinctrl-names = "default"; + linux,rc-map-name = "rc-x96max"; +}; + +&pwm_AO_cd { + pinctrl-0 = <&pwm_ao_d_e_pins>; + pinctrl-names = "default"; + clocks = <&xtal>; + clock-names = "clkin1"; + status = "okay"; }; &ext_mdio { @@ -356,6 +409,9 @@ non-removable; disable-wp; + /* WiFi firmware requires power to be kept while in suspend */ + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; vmmc-supply = <&vddao_3v3>; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi index f8d43e3dcf20..fb0ab27d1f64 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi @@ -3,56 +3,11 @@ * Copyright (c) 2018 Amlogic, Inc. All rights reserved. */ -#include <dt-bindings/phy/phy.h> -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/clock/axg-audio-clkc.h> -#include <dt-bindings/clock/g12a-clkc.h> -#include <dt-bindings/clock/g12a-aoclkc.h> -#include <dt-bindings/interrupt-controller/irq.h> -#include <dt-bindings/interrupt-controller/arm-gic.h> -#include <dt-bindings/reset/amlogic,meson-axg-audio-arb.h> -#include <dt-bindings/reset/amlogic,meson-g12a-reset.h> +#include "meson-g12.dtsi" / { compatible = "amlogic,g12a"; - interrupt-parent = <&gic>; - #address-cells = <2>; - #size-cells = <2>; - - tdmif_a: audio-controller-0 { - compatible = "amlogic,axg-tdm-iface"; - #sound-dai-cells = <0>; - sound-name-prefix = "TDM_A"; - clocks = <&clkc_audio AUD_CLKID_MST_A_MCLK>, - <&clkc_audio AUD_CLKID_MST_A_SCLK>, - <&clkc_audio AUD_CLKID_MST_A_LRCLK>; - clock-names = "mclk", "sclk", "lrclk"; - status = "disabled"; - }; - - tdmif_b: audio-controller-1 { - compatible = "amlogic,axg-tdm-iface"; - #sound-dai-cells = <0>; - sound-name-prefix = "TDM_B"; - clocks = <&clkc_audio AUD_CLKID_MST_B_MCLK>, - <&clkc_audio AUD_CLKID_MST_B_SCLK>, - <&clkc_audio AUD_CLKID_MST_B_LRCLK>; - clock-names = "mclk", "sclk", "lrclk"; - status = "disabled"; - }; - - tdmif_c: audio-controller-2 { - compatible = "amlogic,axg-tdm-iface"; - #sound-dai-cells = <0>; - sound-name-prefix = "TDM_C"; - clocks = <&clkc_audio AUD_CLKID_MST_C_MCLK>, - <&clkc_audio AUD_CLKID_MST_C_SCLK>, - <&clkc_audio AUD_CLKID_MST_C_LRCLK>; - clock-names = "mclk", "sclk", "lrclk"; - status = "disabled"; - }; - cpus { #address-cells = <0x2>; #size-cells = <0x0>; @@ -63,6 +18,7 @@ reg = <0x0 0x0>; enable-method = "psci"; next-level-cache = <&l2>; + #cooling-cells = <2>; }; cpu1: cpu@1 { @@ -71,6 +27,7 @@ reg = <0x0 0x1>; enable-method = "psci"; next-level-cache = <&l2>; + #cooling-cells = <2>; }; cpu2: cpu@2 { @@ -79,6 +36,7 @@ reg = <0x0 0x2>; enable-method = "psci"; next-level-cache = <&l2>; + #cooling-cells = <2>; }; cpu3: cpu@3 { @@ -87,6 +45,7 @@ reg = <0x0 0x3>; enable-method = "psci"; next-level-cache = <&l2>; + #cooling-cells = <2>; }; l2: l2-cache0 { @@ -94,2359 +53,83 @@ }; }; - efuse: efuse { - compatible = "amlogic,meson-gxbb-efuse"; - clocks = <&clkc CLKID_EFUSE>; - #address-cells = <1>; - #size-cells = <1>; - read-only; - }; + cpu_opp_table: opp-table { + compatible = "operating-points-v2"; + opp-shared; - psci { - compatible = "arm,psci-1.0"; - method = "smc"; - }; - - reserved-memory { - #address-cells = <2>; - #size-cells = <2>; - ranges; - - /* 3 MiB reserved for ARM Trusted Firmware (BL31) */ - secmon_reserved: secmon@5000000 { - reg = <0x0 0x05000000 0x0 0x300000>; - no-map; + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + opp-microvolt = <731000>; }; - linux,cma { - compatible = "shared-dma-pool"; - reusable; - size = <0x0 0x10000000>; - alignment = <0x0 0x400000>; - linux,cma-default; + opp-250000000 { + opp-hz = /bits/ 64 <250000000>; + opp-microvolt = <731000>; }; - }; - - sm: secure-monitor { - compatible = "amlogic,meson-gxbb-sm"; - }; - - soc { - compatible = "simple-bus"; - #address-cells = <2>; - #size-cells = <2>; - ranges; - ethmac: ethernet@ff3f0000 { - compatible = "amlogic,meson-axg-dwmac", - "snps,dwmac-3.70a", - "snps,dwmac"; - reg = <0x0 0xff3f0000 0x0 0x10000 - 0x0 0xff634540 0x0 0x8>; - interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "macirq"; - clocks = <&clkc CLKID_ETH>, - <&clkc CLKID_FCLK_DIV2>, - <&clkc CLKID_MPLL2>; - clock-names = "stmmaceth", "clkin0", "clkin1"; - status = "disabled"; - - mdio0: mdio { - #address-cells = <1>; - #size-cells = <0>; - compatible = "snps,dwmac-mdio"; - }; + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + opp-microvolt = <731000>; }; - apb: bus@ff600000 { - compatible = "simple-bus"; - reg = <0x0 0xff600000 0x0 0x200000>; - #address-cells = <2>; - #size-cells = <2>; - ranges = <0x0 0x0 0x0 0xff600000 0x0 0x200000>; - - hdmi_tx: hdmi-tx@0 { - compatible = "amlogic,meson-g12a-dw-hdmi"; - reg = <0x0 0x0 0x0 0x10000>; - interrupts = <GIC_SPI 57 IRQ_TYPE_EDGE_RISING>; - resets = <&reset RESET_HDMITX_CAPB3>, - <&reset RESET_HDMITX_PHY>, - <&reset RESET_HDMITX>; - reset-names = "hdmitx_apb", "hdmitx", "hdmitx_phy"; - clocks = <&clkc CLKID_HDMI>, - <&clkc CLKID_HTX_PCLK>, - <&clkc CLKID_VPU_INTR>; - clock-names = "isfr", "iahb", "venci"; - #address-cells = <1>; - #size-cells = <0>; - #sound-dai-cells = <0>; - status = "disabled"; - - /* VPU VENC Input */ - hdmi_tx_venc_port: port@0 { - reg = <0>; - - hdmi_tx_in: endpoint { - remote-endpoint = <&hdmi_tx_out>; - }; - }; - - /* TMDS Output */ - hdmi_tx_tmds_port: port@1 { - reg = <1>; - }; - }; - - apb_efuse: bus@30000 { - compatible = "simple-bus"; - reg = <0x0 0x30000 0x0 0x2000>; - #address-cells = <2>; - #size-cells = <2>; - ranges = <0x0 0x0 0x0 0x30000 0x0 0x2000>; - - hwrng: rng@218 { - compatible = "amlogic,meson-rng"; - reg = <0x0 0x218 0x0 0x4>; - }; - }; - - periphs: bus@34400 { - compatible = "simple-bus"; - reg = <0x0 0x34400 0x0 0x400>; - #address-cells = <2>; - #size-cells = <2>; - ranges = <0x0 0x0 0x0 0x34400 0x0 0x400>; - - periphs_pinctrl: pinctrl@40 { - compatible = "amlogic,meson-g12a-periphs-pinctrl"; - #address-cells = <2>; - #size-cells = <2>; - ranges; - - gpio: bank@40 { - reg = <0x0 0x40 0x0 0x4c>, - <0x0 0xe8 0x0 0x18>, - <0x0 0x120 0x0 0x18>, - <0x0 0x2c0 0x0 0x40>, - <0x0 0x340 0x0 0x1c>; - reg-names = "gpio", - "pull", - "pull-enable", - "mux", - "ds"; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&periphs_pinctrl 0 0 86>; - }; - - cec_ao_a_h_pins: cec_ao_a_h { - mux { - groups = "cec_ao_a_h"; - function = "cec_ao_a_h"; - bias-disable; - }; - }; - - cec_ao_b_h_pins: cec_ao_b_h { - mux { - groups = "cec_ao_b_h"; - function = "cec_ao_b_h"; - bias-disable; - }; - }; - - emmc_pins: emmc { - mux-0 { - groups = "emmc_nand_d0", - "emmc_nand_d1", - "emmc_nand_d2", - "emmc_nand_d3", - "emmc_nand_d4", - "emmc_nand_d5", - "emmc_nand_d6", - "emmc_nand_d7", - "emmc_cmd"; - function = "emmc"; - bias-pull-up; - drive-strength-microamp = <4000>; - }; - - mux-1 { - groups = "emmc_clk"; - function = "emmc"; - bias-disable; - drive-strength-microamp = <4000>; - }; - }; - - emmc_ds_pins: emmc-ds { - mux { - groups = "emmc_nand_ds"; - function = "emmc"; - bias-pull-down; - drive-strength-microamp = <4000>; - }; - }; - - emmc_clk_gate_pins: emmc_clk_gate { - mux { - groups = "BOOT_8"; - function = "gpio_periphs"; - bias-pull-down; - drive-strength-microamp = <4000>; - }; - }; - - hdmitx_ddc_pins: hdmitx_ddc { - mux { - groups = "hdmitx_sda", - "hdmitx_sck"; - function = "hdmitx"; - bias-disable; - drive-strength-microamp = <4000>; - }; - }; - - hdmitx_hpd_pins: hdmitx_hpd { - mux { - groups = "hdmitx_hpd_in"; - function = "hdmitx"; - bias-disable; - }; - }; - - - i2c0_sda_c_pins: i2c0-sda-c { - mux { - groups = "i2c0_sda_c"; - function = "i2c0"; - bias-disable; - drive-strength-microamp = <3000>; - - }; - }; - - i2c0_sck_c_pins: i2c0-sck-c { - mux { - groups = "i2c0_sck_c"; - function = "i2c0"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - i2c0_sda_z0_pins: i2c0-sda-z0 { - mux { - groups = "i2c0_sda_z0"; - function = "i2c0"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - i2c0_sck_z1_pins: i2c0-sck-z1 { - mux { - groups = "i2c0_sck_z1"; - function = "i2c0"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - i2c0_sda_z7_pins: i2c0-sda-z7 { - mux { - groups = "i2c0_sda_z7"; - function = "i2c0"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - i2c0_sda_z8_pins: i2c0-sda-z8 { - mux { - groups = "i2c0_sda_z8"; - function = "i2c0"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - i2c1_sda_x_pins: i2c1-sda-x { - mux { - groups = "i2c1_sda_x"; - function = "i2c1"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - i2c1_sck_x_pins: i2c1-sck-x { - mux { - groups = "i2c1_sck_x"; - function = "i2c1"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - i2c1_sda_h2_pins: i2c1-sda-h2 { - mux { - groups = "i2c1_sda_h2"; - function = "i2c1"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - i2c1_sck_h3_pins: i2c1-sck-h3 { - mux { - groups = "i2c1_sck_h3"; - function = "i2c1"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - i2c1_sda_h6_pins: i2c1-sda-h6 { - mux { - groups = "i2c1_sda_h6"; - function = "i2c1"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - i2c1_sck_h7_pins: i2c1-sck-h7 { - mux { - groups = "i2c1_sck_h7"; - function = "i2c1"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - i2c2_sda_x_pins: i2c2-sda-x { - mux { - groups = "i2c2_sda_x"; - function = "i2c2"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - i2c2_sck_x_pins: i2c2-sck-x { - mux { - groups = "i2c2_sck_x"; - function = "i2c2"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - i2c2_sda_z_pins: i2c2-sda-z { - mux { - groups = "i2c2_sda_z"; - function = "i2c2"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - i2c2_sck_z_pins: i2c2-sck-z { - mux { - groups = "i2c2_sck_z"; - function = "i2c2"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - i2c3_sda_h_pins: i2c3-sda-h { - mux { - groups = "i2c3_sda_h"; - function = "i2c3"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - i2c3_sck_h_pins: i2c3-sck-h { - mux { - groups = "i2c3_sck_h"; - function = "i2c3"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - i2c3_sda_a_pins: i2c3-sda-a { - mux { - groups = "i2c3_sda_a"; - function = "i2c3"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - i2c3_sck_a_pins: i2c3-sck-a { - mux { - groups = "i2c3_sck_a"; - function = "i2c3"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - mclk0_a_pins: mclk0-a { - mux { - groups = "mclk0_a"; - function = "mclk0"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - mclk1_a_pins: mclk1-a { - mux { - groups = "mclk1_a"; - function = "mclk1"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - mclk1_x_pins: mclk1-x { - mux { - groups = "mclk1_x"; - function = "mclk1"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - mclk1_z_pins: mclk1-z { - mux { - groups = "mclk1_z"; - function = "mclk1"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - pdm_din0_a_pins: pdm-din0-a { - mux { - groups = "pdm_din0_a"; - function = "pdm"; - bias-disable; - }; - }; - - pdm_din0_c_pins: pdm-din0-c { - mux { - groups = "pdm_din0_c"; - function = "pdm"; - bias-disable; - }; - }; - - pdm_din0_x_pins: pdm-din0-x { - mux { - groups = "pdm_din0_x"; - function = "pdm"; - bias-disable; - }; - }; - - pdm_din0_z_pins: pdm-din0-z { - mux { - groups = "pdm_din0_z"; - function = "pdm"; - bias-disable; - }; - }; - - pdm_din1_a_pins: pdm-din1-a { - mux { - groups = "pdm_din1_a"; - function = "pdm"; - bias-disable; - }; - }; - - pdm_din1_c_pins: pdm-din1-c { - mux { - groups = "pdm_din1_c"; - function = "pdm"; - bias-disable; - }; - }; - - pdm_din1_x_pins: pdm-din1-x { - mux { - groups = "pdm_din1_x"; - function = "pdm"; - bias-disable; - }; - }; - - pdm_din1_z_pins: pdm-din1-z { - mux { - groups = "pdm_din1_z"; - function = "pdm"; - bias-disable; - }; - }; - - pdm_din2_a_pins: pdm-din2-a { - mux { - groups = "pdm_din2_a"; - function = "pdm"; - bias-disable; - }; - }; - - pdm_din2_c_pins: pdm-din2-c { - mux { - groups = "pdm_din2_c"; - function = "pdm"; - bias-disable; - }; - }; - - pdm_din2_x_pins: pdm-din2-x { - mux { - groups = "pdm_din2_x"; - function = "pdm"; - bias-disable; - }; - }; - - pdm_din2_z_pins: pdm-din2-z { - mux { - groups = "pdm_din2_z"; - function = "pdm"; - bias-disable; - }; - }; - - pdm_din3_a_pins: pdm-din3-a { - mux { - groups = "pdm_din3_a"; - function = "pdm"; - bias-disable; - }; - }; - - pdm_din3_c_pins: pdm-din3-c { - mux { - groups = "pdm_din3_c"; - function = "pdm"; - bias-disable; - }; - }; - - pdm_din3_x_pins: pdm-din3-x { - mux { - groups = "pdm_din3_x"; - function = "pdm"; - bias-disable; - }; - }; - - pdm_din3_z_pins: pdm-din3-z { - mux { - groups = "pdm_din3_z"; - function = "pdm"; - bias-disable; - }; - }; - - pdm_dclk_a_pins: pdm-dclk-a { - mux { - groups = "pdm_dclk_a"; - function = "pdm"; - bias-disable; - drive-strength-microamp = <500>; - }; - }; - - pdm_dclk_c_pins: pdm-dclk-c { - mux { - groups = "pdm_dclk_c"; - function = "pdm"; - bias-disable; - drive-strength-microamp = <500>; - }; - }; - - pdm_dclk_x_pins: pdm-dclk-x { - mux { - groups = "pdm_dclk_x"; - function = "pdm"; - bias-disable; - drive-strength-microamp = <500>; - }; - }; - - pdm_dclk_z_pins: pdm-dclk-z { - mux { - groups = "pdm_dclk_z"; - function = "pdm"; - bias-disable; - drive-strength-microamp = <500>; - }; - }; - - pwm_a_pins: pwm-a { - mux { - groups = "pwm_a"; - function = "pwm_a"; - bias-disable; - }; - }; - - pwm_b_x7_pins: pwm-b-x7 { - mux { - groups = "pwm_b_x7"; - function = "pwm_b"; - bias-disable; - }; - }; - - pwm_b_x19_pins: pwm-b-x19 { - mux { - groups = "pwm_b_x19"; - function = "pwm_b"; - bias-disable; - }; - }; - - pwm_c_c_pins: pwm-c-c { - mux { - groups = "pwm_c_c"; - function = "pwm_c"; - bias-disable; - }; - }; - - pwm_c_x5_pins: pwm-c-x5 { - mux { - groups = "pwm_c_x5"; - function = "pwm_c"; - bias-disable; - }; - }; - - pwm_c_x8_pins: pwm-c-x8 { - mux { - groups = "pwm_c_x8"; - function = "pwm_c"; - bias-disable; - }; - }; - - pwm_d_x3_pins: pwm-d-x3 { - mux { - groups = "pwm_d_x3"; - function = "pwm_d"; - bias-disable; - }; - }; - - pwm_d_x6_pins: pwm-d-x6 { - mux { - groups = "pwm_d_x6"; - function = "pwm_d"; - bias-disable; - }; - }; - - pwm_e_pins: pwm-e { - mux { - groups = "pwm_e"; - function = "pwm_e"; - bias-disable; - }; - }; - - pwm_f_x_pins: pwm-f-x { - mux { - groups = "pwm_f_x"; - function = "pwm_f"; - bias-disable; - }; - }; - - pwm_f_h_pins: pwm-f-h { - mux { - groups = "pwm_f_h"; - function = "pwm_f"; - bias-disable; - }; - }; - - sdcard_c_pins: sdcard_c { - mux-0 { - groups = "sdcard_d0_c", - "sdcard_d1_c", - "sdcard_d2_c", - "sdcard_d3_c", - "sdcard_cmd_c"; - function = "sdcard"; - bias-pull-up; - drive-strength-microamp = <4000>; - }; - - mux-1 { - groups = "sdcard_clk_c"; - function = "sdcard"; - bias-disable; - drive-strength-microamp = <4000>; - }; - }; - - sdcard_clk_gate_c_pins: sdcard_clk_gate_c { - mux { - groups = "GPIOC_4"; - function = "gpio_periphs"; - bias-pull-down; - drive-strength-microamp = <4000>; - }; - }; - - sdcard_z_pins: sdcard_z { - mux-0 { - groups = "sdcard_d0_z", - "sdcard_d1_z", - "sdcard_d2_z", - "sdcard_d3_z", - "sdcard_cmd_z"; - function = "sdcard"; - bias-pull-up; - drive-strength-microamp = <4000>; - }; - - mux-1 { - groups = "sdcard_clk_z"; - function = "sdcard"; - bias-disable; - drive-strength-microamp = <4000>; - }; - }; - - sdcard_clk_gate_z_pins: sdcard_clk_gate_z { - mux { - groups = "GPIOZ_6"; - function = "gpio_periphs"; - bias-pull-down; - drive-strength-microamp = <4000>; - }; - }; - - sdio_pins: sdio { - mux { - groups = "sdio_d0", - "sdio_d1", - "sdio_d2", - "sdio_d3", - "sdio_clk", - "sdio_cmd"; - function = "sdio"; - bias-disable; - drive-strength-microamp = <4000>; - }; - }; - - sdio_clk_gate_pins: sdio_clk_gate { - mux { - groups = "GPIOX_4"; - function = "gpio_periphs"; - bias-pull-down; - drive-strength-microamp = <4000>; - }; - }; - - spdif_in_a10_pins: spdif-in-a10 { - mux { - groups = "spdif_in_a10"; - function = "spdif_in"; - bias-disable; - }; - }; - - spdif_in_a12_pins: spdif-in-a12 { - mux { - groups = "spdif_in_a12"; - function = "spdif_in"; - bias-disable; - }; - }; - - spdif_in_h_pins: spdif-in-h { - mux { - groups = "spdif_in_h"; - function = "spdif_in"; - bias-disable; - }; - }; - - spdif_out_h_pins: spdif-out-h { - mux { - groups = "spdif_out_h"; - function = "spdif_out"; - drive-strength-microamp = <500>; - bias-disable; - }; - }; - - spdif_out_a11_pins: spdif-out-a11 { - mux { - groups = "spdif_out_a11"; - function = "spdif_out"; - drive-strength-microamp = <500>; - bias-disable; - }; - }; - - spdif_out_a13_pins: spdif-out-a13 { - mux { - groups = "spdif_out_a13"; - function = "spdif_out"; - drive-strength-microamp = <500>; - bias-disable; - }; - }; - - tdm_a_din0_pins: tdm-a-din0 { - mux { - groups = "tdm_a_din0"; - function = "tdm_a"; - bias-disable; - }; - }; - - - tdm_a_din1_pins: tdm-a-din1 { - mux { - groups = "tdm_a_din1"; - function = "tdm_a"; - bias-disable; - }; - }; - - tdm_a_dout0_pins: tdm-a-dout0 { - mux { - groups = "tdm_a_dout0"; - function = "tdm_a"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - tdm_a_dout1_pins: tdm-a-dout1 { - mux { - groups = "tdm_a_dout1"; - function = "tdm_a"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - tdm_a_fs_pins: tdm-a-fs { - mux { - groups = "tdm_a_fs"; - function = "tdm_a"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - tdm_a_sclk_pins: tdm-a-sclk { - mux { - groups = "tdm_a_sclk"; - function = "tdm_a"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - tdm_a_slv_fs_pins: tdm-a-slv-fs { - mux { - groups = "tdm_a_slv_fs"; - function = "tdm_a"; - bias-disable; - }; - }; - - - tdm_a_slv_sclk_pins: tdm-a-slv-sclk { - mux { - groups = "tdm_a_slv_sclk"; - function = "tdm_a"; - bias-disable; - }; - }; - - tdm_b_din0_pins: tdm-b-din0 { - mux { - groups = "tdm_b_din0"; - function = "tdm_b"; - bias-disable; - }; - }; - - tdm_b_din1_pins: tdm-b-din1 { - mux { - groups = "tdm_b_din1"; - function = "tdm_b"; - bias-disable; - }; - }; - - tdm_b_din2_pins: tdm-b-din2 { - mux { - groups = "tdm_b_din2"; - function = "tdm_b"; - bias-disable; - }; - }; - - tdm_b_din3_a_pins: tdm-b-din3-a { - mux { - groups = "tdm_b_din3_a"; - function = "tdm_b"; - bias-disable; - }; - }; - - tdm_b_din3_h_pins: tdm-b-din3-h { - mux { - groups = "tdm_b_din3_h"; - function = "tdm_b"; - bias-disable; - }; - }; - - tdm_b_dout0_pins: tdm-b-dout0 { - mux { - groups = "tdm_b_dout0"; - function = "tdm_b"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - tdm_b_dout1_pins: tdm-b-dout1 { - mux { - groups = "tdm_b_dout1"; - function = "tdm_b"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - tdm_b_dout2_pins: tdm-b-dout2 { - mux { - groups = "tdm_b_dout2"; - function = "tdm_b"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - tdm_b_dout3_a_pins: tdm-b-dout3-a { - mux { - groups = "tdm_b_dout3_a"; - function = "tdm_b"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - tdm_b_dout3_h_pins: tdm-b-dout3-h { - mux { - groups = "tdm_b_dout3_h"; - function = "tdm_b"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - tdm_b_fs_pins: tdm-b-fs { - mux { - groups = "tdm_b_fs"; - function = "tdm_b"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - tdm_b_sclk_pins: tdm-b-sclk { - mux { - groups = "tdm_b_sclk"; - function = "tdm_b"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - tdm_b_slv_fs_pins: tdm-b-slv-fs { - mux { - groups = "tdm_b_slv_fs"; - function = "tdm_b"; - bias-disable; - }; - }; - - tdm_b_slv_sclk_pins: tdm-b-slv-sclk { - mux { - groups = "tdm_b_slv_sclk"; - function = "tdm_b"; - bias-disable; - }; - }; - - tdm_c_din0_a_pins: tdm-c-din0-a { - mux { - groups = "tdm_c_din0_a"; - function = "tdm_c"; - bias-disable; - }; - }; - - tdm_c_din0_z_pins: tdm-c-din0-z { - mux { - groups = "tdm_c_din0_z"; - function = "tdm_c"; - bias-disable; - }; - }; - - tdm_c_din1_a_pins: tdm-c-din1-a { - mux { - groups = "tdm_c_din1_a"; - function = "tdm_c"; - bias-disable; - }; - }; - - tdm_c_din1_z_pins: tdm-c-din1-z { - mux { - groups = "tdm_c_din1_z"; - function = "tdm_c"; - bias-disable; - }; - }; - - tdm_c_din2_a_pins: tdm-c-din2-a { - mux { - groups = "tdm_c_din2_a"; - function = "tdm_c"; - bias-disable; - }; - }; - - eth_leds_pins: eth-leds { - mux { - groups = "eth_link_led", - "eth_act_led"; - function = "eth"; - bias-disable; - }; - }; - - eth_pins: eth { - mux { - groups = "eth_mdio", - "eth_mdc", - "eth_rgmii_rx_clk", - "eth_rx_dv", - "eth_rxd0", - "eth_rxd1", - "eth_txen", - "eth_txd0", - "eth_txd1"; - function = "eth"; - drive-strength-microamp = <4000>; - bias-disable; - }; - }; - - eth_rgmii_pins: eth-rgmii { - mux { - groups = "eth_rxd2_rgmii", - "eth_rxd3_rgmii", - "eth_rgmii_tx_clk", - "eth_txd2_rgmii", - "eth_txd3_rgmii"; - function = "eth"; - drive-strength-microamp = <4000>; - bias-disable; - }; - }; - - tdm_c_din2_z_pins: tdm-c-din2-z { - mux { - groups = "tdm_c_din2_z"; - function = "tdm_c"; - bias-disable; - }; - }; - - tdm_c_din3_a_pins: tdm-c-din3-a { - mux { - groups = "tdm_c_din3_a"; - function = "tdm_c"; - bias-disable; - }; - }; - - tdm_c_din3_z_pins: tdm-c-din3-z { - mux { - groups = "tdm_c_din3_z"; - function = "tdm_c"; - bias-disable; - }; - }; - - tdm_c_dout0_a_pins: tdm-c-dout0-a { - mux { - groups = "tdm_c_dout0_a"; - function = "tdm_c"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - tdm_c_dout0_z_pins: tdm-c-dout0-z { - mux { - groups = "tdm_c_dout0_z"; - function = "tdm_c"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - tdm_c_dout1_a_pins: tdm-c-dout1-a { - mux { - groups = "tdm_c_dout1_a"; - function = "tdm_c"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - tdm_c_dout1_z_pins: tdm-c-dout1-z { - mux { - groups = "tdm_c_dout1_z"; - function = "tdm_c"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - tdm_c_dout2_a_pins: tdm-c-dout2-a { - mux { - groups = "tdm_c_dout2_a"; - function = "tdm_c"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - tdm_c_dout2_z_pins: tdm-c-dout2-z { - mux { - groups = "tdm_c_dout2_z"; - function = "tdm_c"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - tdm_c_dout3_a_pins: tdm-c-dout3-a { - mux { - groups = "tdm_c_dout3_a"; - function = "tdm_c"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - tdm_c_dout3_z_pins: tdm-c-dout3-z { - mux { - groups = "tdm_c_dout3_z"; - function = "tdm_c"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - tdm_c_fs_a_pins: tdm-c-fs-a { - mux { - groups = "tdm_c_fs_a"; - function = "tdm_c"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - tdm_c_fs_z_pins: tdm-c-fs-z { - mux { - groups = "tdm_c_fs_z"; - function = "tdm_c"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - tdm_c_sclk_a_pins: tdm-c-sclk-a { - mux { - groups = "tdm_c_sclk_a"; - function = "tdm_c"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - tdm_c_sclk_z_pins: tdm-c-sclk-z { - mux { - groups = "tdm_c_sclk_z"; - function = "tdm_c"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - tdm_c_slv_fs_a_pins: tdm-c-slv-fs-a { - mux { - groups = "tdm_c_slv_fs_a"; - function = "tdm_c"; - bias-disable; - }; - }; - - tdm_c_slv_fs_z_pins: tdm-c-slv-fs-z { - mux { - groups = "tdm_c_slv_fs_z"; - function = "tdm_c"; - bias-disable; - }; - }; - - tdm_c_slv_sclk_a_pins: tdm-c-slv-sclk-a { - mux { - groups = "tdm_c_slv_sclk_a"; - function = "tdm_c"; - bias-disable; - }; - }; - - tdm_c_slv_sclk_z_pins: tdm-c-slv-sclk-z { - mux { - groups = "tdm_c_slv_sclk_z"; - function = "tdm_c"; - bias-disable; - }; - }; - - uart_a_pins: uart-a { - mux { - groups = "uart_a_tx", - "uart_a_rx"; - function = "uart_a"; - bias-disable; - }; - }; - - uart_a_cts_rts_pins: uart-a-cts-rts { - mux { - groups = "uart_a_cts", - "uart_a_rts"; - function = "uart_a"; - bias-disable; - }; - }; - - uart_b_pins: uart-b { - mux { - groups = "uart_b_tx", - "uart_b_rx"; - function = "uart_b"; - bias-disable; - }; - }; - - uart_c_pins: uart-c { - mux { - groups = "uart_c_tx", - "uart_c_rx"; - function = "uart_c"; - bias-disable; - }; - }; - - uart_c_cts_rts_pins: uart-c-cts-rts { - mux { - groups = "uart_c_cts", - "uart_c_rts"; - function = "uart_c"; - bias-disable; - }; - }; - }; - }; - - usb2_phy0: phy@36000 { - compatible = "amlogic,g12a-usb2-phy"; - reg = <0x0 0x36000 0x0 0x2000>; - clocks = <&xtal>; - clock-names = "xtal"; - resets = <&reset RESET_USB_PHY20>; - reset-names = "phy"; - #phy-cells = <0>; - }; - - dmc: bus@38000 { - compatible = "simple-bus"; - reg = <0x0 0x38000 0x0 0x400>; - #address-cells = <2>; - #size-cells = <2>; - ranges = <0x0 0x0 0x0 0x38000 0x0 0x400>; - - canvas: video-lut@48 { - compatible = "amlogic,canvas"; - reg = <0x0 0x48 0x0 0x14>; - }; - }; - - usb2_phy1: phy@3a000 { - compatible = "amlogic,g12a-usb2-phy"; - reg = <0x0 0x3a000 0x0 0x2000>; - clocks = <&xtal>; - clock-names = "xtal"; - resets = <&reset RESET_USB_PHY21>; - reset-names = "phy"; - #phy-cells = <0>; - }; - - hiu: bus@3c000 { - compatible = "simple-bus"; - reg = <0x0 0x3c000 0x0 0x1400>; - #address-cells = <2>; - #size-cells = <2>; - ranges = <0x0 0x0 0x0 0x3c000 0x0 0x1400>; - - hhi: system-controller@0 { - compatible = "amlogic,meson-gx-hhi-sysctrl", - "simple-mfd", "syscon"; - reg = <0 0 0 0x400>; - - clkc: clock-controller { - compatible = "amlogic,g12a-clkc"; - #clock-cells = <1>; - clocks = <&xtal>; - clock-names = "xtal"; - }; - }; - }; - - pdm: audio-controller@40000 { - compatible = "amlogic,g12a-pdm", - "amlogic,axg-pdm"; - reg = <0x0 0x40000 0x0 0x34>; - #sound-dai-cells = <0>; - sound-name-prefix = "PDM"; - clocks = <&clkc_audio AUD_CLKID_PDM>, - <&clkc_audio AUD_CLKID_PDM_DCLK>, - <&clkc_audio AUD_CLKID_PDM_SYSCLK>; - clock-names = "pclk", "dclk", "sysclk"; - status = "disabled"; - }; - - audio: bus@42000 { - compatible = "simple-bus"; - reg = <0x0 0x42000 0x0 0x2000>; - #address-cells = <2>; - #size-cells = <2>; - ranges = <0x0 0x0 0x0 0x42000 0x0 0x2000>; - - clkc_audio: clock-controller@0 { - status = "disabled"; - compatible = "amlogic,g12a-audio-clkc"; - reg = <0x0 0x0 0x0 0xb4>; - #clock-cells = <1>; - - clocks = <&clkc CLKID_AUDIO>, - <&clkc CLKID_MPLL0>, - <&clkc CLKID_MPLL1>, - <&clkc CLKID_MPLL2>, - <&clkc CLKID_MPLL3>, - <&clkc CLKID_HIFI_PLL>, - <&clkc CLKID_FCLK_DIV3>, - <&clkc CLKID_FCLK_DIV4>, - <&clkc CLKID_GP0_PLL>; - clock-names = "pclk", - "mst_in0", - "mst_in1", - "mst_in2", - "mst_in3", - "mst_in4", - "mst_in5", - "mst_in6", - "mst_in7"; - - resets = <&reset RESET_AUDIO>; - }; - - toddr_a: audio-controller@100 { - compatible = "amlogic,g12a-toddr", - "amlogic,axg-toddr"; - reg = <0x0 0x100 0x0 0x1c>; - #sound-dai-cells = <0>; - sound-name-prefix = "TODDR_A"; - interrupts = <GIC_SPI 148 IRQ_TYPE_EDGE_RISING>; - clocks = <&clkc_audio AUD_CLKID_TODDR_A>; - resets = <&arb AXG_ARB_TODDR_A>; - status = "disabled"; - }; - - toddr_b: audio-controller@140 { - compatible = "amlogic,g12a-toddr", - "amlogic,axg-toddr"; - reg = <0x0 0x140 0x0 0x1c>; - #sound-dai-cells = <0>; - sound-name-prefix = "TODDR_B"; - interrupts = <GIC_SPI 149 IRQ_TYPE_EDGE_RISING>; - clocks = <&clkc_audio AUD_CLKID_TODDR_B>; - resets = <&arb AXG_ARB_TODDR_B>; - status = "disabled"; - }; - - toddr_c: audio-controller@180 { - compatible = "amlogic,g12a-toddr", - "amlogic,axg-toddr"; - reg = <0x0 0x180 0x0 0x1c>; - #sound-dai-cells = <0>; - sound-name-prefix = "TODDR_C"; - interrupts = <GIC_SPI 150 IRQ_TYPE_EDGE_RISING>; - clocks = <&clkc_audio AUD_CLKID_TODDR_C>; - resets = <&arb AXG_ARB_TODDR_C>; - status = "disabled"; - }; - - frddr_a: audio-controller@1c0 { - compatible = "amlogic,g12a-frddr", - "amlogic,axg-frddr"; - reg = <0x0 0x1c0 0x0 0x1c>; - #sound-dai-cells = <0>; - sound-name-prefix = "FRDDR_A"; - interrupts = <GIC_SPI 152 IRQ_TYPE_EDGE_RISING>; - clocks = <&clkc_audio AUD_CLKID_FRDDR_A>; - resets = <&arb AXG_ARB_FRDDR_A>; - status = "disabled"; - }; - - frddr_b: audio-controller@200 { - compatible = "amlogic,g12a-frddr", - "amlogic,axg-frddr"; - reg = <0x0 0x200 0x0 0x1c>; - #sound-dai-cells = <0>; - sound-name-prefix = "FRDDR_B"; - interrupts = <GIC_SPI 153 IRQ_TYPE_EDGE_RISING>; - clocks = <&clkc_audio AUD_CLKID_FRDDR_B>; - resets = <&arb AXG_ARB_FRDDR_B>; - status = "disabled"; - }; - - frddr_c: audio-controller@240 { - compatible = "amlogic,g12a-frddr", - "amlogic,axg-frddr"; - reg = <0x0 0x240 0x0 0x1c>; - #sound-dai-cells = <0>; - sound-name-prefix = "FRDDR_C"; - interrupts = <GIC_SPI 154 IRQ_TYPE_EDGE_RISING>; - clocks = <&clkc_audio AUD_CLKID_FRDDR_C>; - resets = <&arb AXG_ARB_FRDDR_C>; - status = "disabled"; - }; - - arb: reset-controller@280 { - status = "disabled"; - compatible = "amlogic,meson-axg-audio-arb"; - reg = <0x0 0x280 0x0 0x4>; - #reset-cells = <1>; - clocks = <&clkc_audio AUD_CLKID_DDR_ARB>; - }; - - tdmin_a: audio-controller@300 { - compatible = "amlogic,g12a-tdmin", - "amlogic,axg-tdmin"; - reg = <0x0 0x300 0x0 0x40>; - sound-name-prefix = "TDMIN_A"; - clocks = <&clkc_audio AUD_CLKID_TDMIN_A>, - <&clkc_audio AUD_CLKID_TDMIN_A_SCLK>, - <&clkc_audio AUD_CLKID_TDMIN_A_SCLK_SEL>, - <&clkc_audio AUD_CLKID_TDMIN_A_LRCLK>, - <&clkc_audio AUD_CLKID_TDMIN_A_LRCLK>; - clock-names = "pclk", "sclk", "sclk_sel", - "lrclk", "lrclk_sel"; - status = "disabled"; - }; - - tdmin_b: audio-controller@340 { - compatible = "amlogic,g12a-tdmin", - "amlogic,axg-tdmin"; - reg = <0x0 0x340 0x0 0x40>; - sound-name-prefix = "TDMIN_B"; - clocks = <&clkc_audio AUD_CLKID_TDMIN_B>, - <&clkc_audio AUD_CLKID_TDMIN_B_SCLK>, - <&clkc_audio AUD_CLKID_TDMIN_B_SCLK_SEL>, - <&clkc_audio AUD_CLKID_TDMIN_B_LRCLK>, - <&clkc_audio AUD_CLKID_TDMIN_B_LRCLK>; - clock-names = "pclk", "sclk", "sclk_sel", - "lrclk", "lrclk_sel"; - status = "disabled"; - }; - - tdmin_c: audio-controller@380 { - compatible = "amlogic,g12a-tdmin", - "amlogic,axg-tdmin"; - reg = <0x0 0x380 0x0 0x40>; - sound-name-prefix = "TDMIN_C"; - clocks = <&clkc_audio AUD_CLKID_TDMIN_C>, - <&clkc_audio AUD_CLKID_TDMIN_C_SCLK>, - <&clkc_audio AUD_CLKID_TDMIN_C_SCLK_SEL>, - <&clkc_audio AUD_CLKID_TDMIN_C_LRCLK>, - <&clkc_audio AUD_CLKID_TDMIN_C_LRCLK>; - clock-names = "pclk", "sclk", "sclk_sel", - "lrclk", "lrclk_sel"; - status = "disabled"; - }; - - tdmin_lb: audio-controller@3c0 { - compatible = "amlogic,g12a-tdmin", - "amlogic,axg-tdmin"; - reg = <0x0 0x3c0 0x0 0x40>; - sound-name-prefix = "TDMIN_LB"; - clocks = <&clkc_audio AUD_CLKID_TDMIN_LB>, - <&clkc_audio AUD_CLKID_TDMIN_LB_SCLK>, - <&clkc_audio AUD_CLKID_TDMIN_LB_SCLK_SEL>, - <&clkc_audio AUD_CLKID_TDMIN_LB_LRCLK>, - <&clkc_audio AUD_CLKID_TDMIN_LB_LRCLK>; - clock-names = "pclk", "sclk", "sclk_sel", - "lrclk", "lrclk_sel"; - status = "disabled"; - }; - - spdifin: audio-controller@400 { - compatible = "amlogic,g12a-spdifin", - "amlogic,axg-spdifin"; - reg = <0x0 0x400 0x0 0x30>; - #sound-dai-cells = <0>; - sound-name-prefix = "SPDIFIN"; - interrupts = <GIC_SPI 151 IRQ_TYPE_EDGE_RISING>; - clocks = <&clkc_audio AUD_CLKID_SPDIFIN>, - <&clkc_audio AUD_CLKID_SPDIFIN_CLK>; - clock-names = "pclk", "refclk"; - status = "disabled"; - }; - - spdifout: audio-controller@480 { - compatible = "amlogic,g12a-spdifout", - "amlogic,axg-spdifout"; - reg = <0x0 0x480 0x0 0x50>; - #sound-dai-cells = <0>; - sound-name-prefix = "SPDIFOUT"; - clocks = <&clkc_audio AUD_CLKID_SPDIFOUT>, - <&clkc_audio AUD_CLKID_SPDIFOUT_CLK>; - clock-names = "pclk", "mclk"; - status = "disabled"; - }; - - tdmout_a: audio-controller@500 { - compatible = "amlogic,g12a-tdmout"; - reg = <0x0 0x500 0x0 0x40>; - sound-name-prefix = "TDMOUT_A"; - clocks = <&clkc_audio AUD_CLKID_TDMOUT_A>, - <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK>, - <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK_SEL>, - <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>, - <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>; - clock-names = "pclk", "sclk", "sclk_sel", - "lrclk", "lrclk_sel"; - status = "disabled"; - }; - - tdmout_b: audio-controller@540 { - compatible = "amlogic,g12a-tdmout"; - reg = <0x0 0x540 0x0 0x40>; - sound-name-prefix = "TDMOUT_B"; - clocks = <&clkc_audio AUD_CLKID_TDMOUT_B>, - <&clkc_audio AUD_CLKID_TDMOUT_B_SCLK>, - <&clkc_audio AUD_CLKID_TDMOUT_B_SCLK_SEL>, - <&clkc_audio AUD_CLKID_TDMOUT_B_LRCLK>, - <&clkc_audio AUD_CLKID_TDMOUT_B_LRCLK>; - clock-names = "pclk", "sclk", "sclk_sel", - "lrclk", "lrclk_sel"; - status = "disabled"; - }; - - tdmout_c: audio-controller@580 { - compatible = "amlogic,g12a-tdmout"; - reg = <0x0 0x580 0x0 0x40>; - sound-name-prefix = "TDMOUT_C"; - clocks = <&clkc_audio AUD_CLKID_TDMOUT_C>, - <&clkc_audio AUD_CLKID_TDMOUT_C_SCLK>, - <&clkc_audio AUD_CLKID_TDMOUT_C_SCLK_SEL>, - <&clkc_audio AUD_CLKID_TDMOUT_C_LRCLK>, - <&clkc_audio AUD_CLKID_TDMOUT_C_LRCLK>; - clock-names = "pclk", "sclk", "sclk_sel", - "lrclk", "lrclk_sel"; - status = "disabled"; - }; - - spdifout_b: audio-controller@680 { - compatible = "amlogic,g12a-spdifout", - "amlogic,axg-spdifout"; - reg = <0x0 0x680 0x0 0x50>; - #sound-dai-cells = <0>; - sound-name-prefix = "SPDIFOUT_B"; - clocks = <&clkc_audio AUD_CLKID_SPDIFOUT_B>, - <&clkc_audio AUD_CLKID_SPDIFOUT_B_CLK>; - clock-names = "pclk", "mclk"; - status = "disabled"; - }; - - tohdmitx: audio-controller@744 { - compatible = "amlogic,g12a-tohdmitx"; - reg = <0x0 0x744 0x0 0x4>; - #sound-dai-cells = <1>; - sound-name-prefix = "TOHDMITX"; - status = "disabled"; - }; - }; - - usb3_pcie_phy: phy@46000 { - compatible = "amlogic,g12a-usb3-pcie-phy"; - reg = <0x0 0x46000 0x0 0x2000>; - clocks = <&clkc CLKID_PCIE_PLL>; - clock-names = "ref_clk"; - resets = <&reset RESET_PCIE_PHY>; - reset-names = "phy"; - assigned-clocks = <&clkc CLKID_PCIE_PLL>; - assigned-clock-rates = <100000000>; - #phy-cells = <1>; - }; - - eth_phy: mdio-multiplexer@4c000 { - compatible = "amlogic,g12a-mdio-mux"; - reg = <0x0 0x4c000 0x0 0xa4>; - clocks = <&clkc CLKID_ETH_PHY>, - <&xtal>, - <&clkc CLKID_MPLL_50M>; - clock-names = "pclk", "clkin0", "clkin1"; - mdio-parent-bus = <&mdio0>; - #address-cells = <1>; - #size-cells = <0>; - - ext_mdio: mdio@0 { - reg = <0>; - #address-cells = <1>; - #size-cells = <0>; - }; - - int_mdio: mdio@1 { - reg = <1>; - #address-cells = <1>; - #size-cells = <0>; - - internal_ephy: ethernet_phy@8 { - compatible = "ethernet-phy-id0180.3301", - "ethernet-phy-ieee802.3-c22"; - interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; - reg = <8>; - max-speed = <100>; - }; - }; - }; + opp-667000000 { + opp-hz = /bits/ 64 <666666666>; + opp-microvolt = <731000>; }; - aobus: bus@ff800000 { - compatible = "simple-bus"; - reg = <0x0 0xff800000 0x0 0x100000>; - #address-cells = <2>; - #size-cells = <2>; - ranges = <0x0 0x0 0x0 0xff800000 0x0 0x100000>; - - rti: sys-ctrl@0 { - compatible = "amlogic,meson-gx-ao-sysctrl", - "simple-mfd", "syscon"; - reg = <0x0 0x0 0x0 0x100>; - #address-cells = <2>; - #size-cells = <2>; - ranges = <0x0 0x0 0x0 0x0 0x0 0x100>; - - clkc_AO: clock-controller { - compatible = "amlogic,meson-g12a-aoclkc"; - #clock-cells = <1>; - #reset-cells = <1>; - clocks = <&xtal>, <&clkc CLKID_CLK81>; - clock-names = "xtal", "mpeg-clk"; - }; - - pwrc_vpu: power-controller-vpu { - compatible = "amlogic,meson-g12a-pwrc-vpu"; - #power-domain-cells = <0>; - amlogic,hhi-sysctrl = <&hhi>; - resets = <&reset RESET_VIU>, - <&reset RESET_VENC>, - <&reset RESET_VCBUS>, - <&reset RESET_BT656>, - <&reset RESET_RDMA>, - <&reset RESET_VENCI>, - <&reset RESET_VENCP>, - <&reset RESET_VDAC>, - <&reset RESET_VDI6>, - <&reset RESET_VENCL>, - <&reset RESET_VID_LOCK>; - clocks = <&clkc CLKID_VPU>, - <&clkc CLKID_VAPB>; - clock-names = "vpu", "vapb"; - /* - * VPU clocking is provided by two identical clock paths - * VPU_0 and VPU_1 muxed to a single clock by a glitch - * free mux to safely change frequency while running. - * Same for VAPB but with a final gate after the glitch free mux. - */ - assigned-clocks = <&clkc CLKID_VPU_0_SEL>, - <&clkc CLKID_VPU_0>, - <&clkc CLKID_VPU>, /* Glitch free mux */ - <&clkc CLKID_VAPB_0_SEL>, - <&clkc CLKID_VAPB_0>, - <&clkc CLKID_VAPB_SEL>; /* Glitch free mux */ - assigned-clock-parents = <&clkc CLKID_FCLK_DIV3>, - <0>, /* Do Nothing */ - <&clkc CLKID_VPU_0>, - <&clkc CLKID_FCLK_DIV4>, - <0>, /* Do Nothing */ - <&clkc CLKID_VAPB_0>; - assigned-clock-rates = <0>, /* Do Nothing */ - <666666666>, - <0>, /* Do Nothing */ - <0>, /* Do Nothing */ - <250000000>, - <0>; /* Do Nothing */ - }; - - ao_pinctrl: pinctrl@14 { - compatible = "amlogic,meson-g12a-aobus-pinctrl"; - #address-cells = <2>; - #size-cells = <2>; - ranges; - - gpio_ao: bank@14 { - reg = <0x0 0x14 0x0 0x8>, - <0x0 0x1c 0x0 0x8>, - <0x0 0x24 0x0 0x14>; - reg-names = "mux", - "ds", - "gpio"; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&ao_pinctrl 0 0 15>; - }; - - i2c_ao_sck_pins: i2c_ao_sck_pins { - mux { - groups = "i2c_ao_sck"; - function = "i2c_ao"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - i2c_ao_sda_pins: i2c_ao_sda { - mux { - groups = "i2c_ao_sda"; - function = "i2c_ao"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - i2c_ao_sck_e_pins: i2c_ao_sck_e { - mux { - groups = "i2c_ao_sck_e"; - function = "i2c_ao"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - i2c_ao_sda_e_pins: i2c_ao_sda_e { - mux { - groups = "i2c_ao_sda_e"; - function = "i2c_ao"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - mclk0_ao_pins: mclk0-ao { - mux { - groups = "mclk0_ao"; - function = "mclk0_ao"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - tdm_ao_b_din0_pins: tdm-ao-b-din0 { - mux { - groups = "tdm_ao_b_din0"; - function = "tdm_ao_b"; - bias-disable; - }; - }; - - spdif_ao_out_pins: spdif-ao-out { - mux { - groups = "spdif_ao_out"; - function = "spdif_ao_out"; - drive-strength-microamp = <500>; - bias-disable; - }; - }; - - tdm_ao_b_din1_pins: tdm-ao-b-din1 { - mux { - groups = "tdm_ao_b_din1"; - function = "tdm_ao_b"; - bias-disable; - }; - }; - - tdm_ao_b_din2_pins: tdm-ao-b-din2 { - mux { - groups = "tdm_ao_b_din2"; - function = "tdm_ao_b"; - bias-disable; - }; - }; - - tdm_ao_b_dout0_pins: tdm-ao-b-dout0 { - mux { - groups = "tdm_ao_b_dout0"; - function = "tdm_ao_b"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - tdm_ao_b_dout1_pins: tdm-ao-b-dout1 { - mux { - groups = "tdm_ao_b_dout1"; - function = "tdm_ao_b"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - tdm_ao_b_dout2_pins: tdm-ao-b-dout2 { - mux { - groups = "tdm_ao_b_dout2"; - function = "tdm_ao_b"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - tdm_ao_b_fs_pins: tdm-ao-b-fs { - mux { - groups = "tdm_ao_b_fs"; - function = "tdm_ao_b"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - tdm_ao_b_sclk_pins: tdm-ao-b-sclk { - mux { - groups = "tdm_ao_b_sclk"; - function = "tdm_ao_b"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - tdm_ao_b_slv_fs_pins: tdm-ao-b-slv-fs { - mux { - groups = "tdm_ao_b_slv_fs"; - function = "tdm_ao_b"; - bias-disable; - }; - }; - - tdm_ao_b_slv_sclk_pins: tdm-ao-b-slv-sclk { - mux { - groups = "tdm_ao_b_slv_sclk"; - function = "tdm_ao_b"; - bias-disable; - }; - }; - - uart_ao_a_pins: uart-a-ao { - mux { - groups = "uart_ao_a_tx", - "uart_ao_a_rx"; - function = "uart_ao_a"; - bias-disable; - }; - }; - - uart_ao_a_cts_rts_pins: uart-ao-a-cts-rts { - mux { - groups = "uart_ao_a_cts", - "uart_ao_a_rts"; - function = "uart_ao_a"; - bias-disable; - }; - }; - - pwm_ao_a_pins: pwm-ao-a { - mux { - groups = "pwm_ao_a"; - function = "pwm_ao_a"; - bias-disable; - }; - }; - - pwm_ao_b_pins: pwm-ao-b { - mux { - groups = "pwm_ao_b"; - function = "pwm_ao_b"; - bias-disable; - }; - }; - - pwm_ao_c_4_pins: pwm-ao-c-4 { - mux { - groups = "pwm_ao_c_4"; - function = "pwm_ao_c"; - bias-disable; - }; - }; - - pwm_ao_c_6_pins: pwm-ao-c-6 { - mux { - groups = "pwm_ao_c_6"; - function = "pwm_ao_c"; - bias-disable; - }; - }; - - pwm_ao_d_5_pins: pwm-ao-d-5 { - mux { - groups = "pwm_ao_d_5"; - function = "pwm_ao_d"; - bias-disable; - }; - }; - - pwm_ao_d_10_pins: pwm-ao-d-10 { - mux { - groups = "pwm_ao_d_10"; - function = "pwm_ao_d"; - bias-disable; - }; - }; - - pwm_ao_d_e_pins: pwm-ao-d-e { - mux { - groups = "pwm_ao_d_e"; - function = "pwm_ao_d"; - }; - }; - - remote_input_ao_pins: remote-input-ao { - mux { - groups = "remote_ao_input"; - function = "remote_ao_input"; - bias-disable; - }; - }; - }; - }; - - cec_AO: cec@100 { - compatible = "amlogic,meson-gx-ao-cec"; - reg = <0x0 0x00100 0x0 0x14>; - interrupts = <GIC_SPI 199 IRQ_TYPE_EDGE_RISING>; - clocks = <&clkc_AO CLKID_AO_CEC>; - clock-names = "core"; - status = "disabled"; - }; - - sec_AO: ao-secure@140 { - compatible = "amlogic,meson-gx-ao-secure", "syscon"; - reg = <0x0 0x140 0x0 0x140>; - amlogic,has-chip-id; - }; - - cecb_AO: cec@280 { - compatible = "amlogic,meson-g12a-ao-cec"; - reg = <0x0 0x00280 0x0 0x1c>; - interrupts = <GIC_SPI 203 IRQ_TYPE_EDGE_RISING>; - clocks = <&clkc_AO CLKID_AO_CTS_OSCIN>; - clock-names = "oscin"; - status = "disabled"; - }; - - pwm_AO_cd: pwm@2000 { - compatible = "amlogic,meson-g12a-ao-pwm-cd"; - reg = <0x0 0x2000 0x0 0x20>; - #pwm-cells = <3>; - status = "disabled"; - }; - - uart_AO: serial@3000 { - compatible = "amlogic,meson-gx-uart", - "amlogic,meson-ao-uart"; - reg = <0x0 0x3000 0x0 0x18>; - interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>; - clocks = <&xtal>, <&clkc_AO CLKID_AO_UART>, <&xtal>; - clock-names = "xtal", "pclk", "baud"; - status = "disabled"; - }; - - uart_AO_B: serial@4000 { - compatible = "amlogic,meson-gx-uart", - "amlogic,meson-ao-uart"; - reg = <0x0 0x4000 0x0 0x18>; - interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>; - clocks = <&xtal>, <&clkc_AO CLKID_AO_UART2>, <&xtal>; - clock-names = "xtal", "pclk", "baud"; - status = "disabled"; - }; - - i2c_AO: i2c@5000 { - compatible = "amlogic,meson-axg-i2c"; - status = "disabled"; - reg = <0x0 0x05000 0x0 0x20>; - interrupts = <GIC_SPI 195 IRQ_TYPE_EDGE_RISING>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&clkc CLKID_I2C>; - }; - - pwm_AO_ab: pwm@7000 { - compatible = "amlogic,meson-g12a-ao-pwm-ab"; - reg = <0x0 0x7000 0x0 0x20>; - #pwm-cells = <3>; - status = "disabled"; - }; - - ir: ir@8000 { - compatible = "amlogic,meson-gxbb-ir"; - reg = <0x0 0x8000 0x0 0x20>; - interrupts = <GIC_SPI 196 IRQ_TYPE_EDGE_RISING>; - status = "disabled"; - }; - - saradc: adc@9000 { - compatible = "amlogic,meson-g12a-saradc", - "amlogic,meson-saradc"; - reg = <0x0 0x9000 0x0 0x48>; - #io-channel-cells = <1>; - interrupts = <GIC_SPI 200 IRQ_TYPE_EDGE_RISING>; - clocks = <&xtal>, - <&clkc_AO CLKID_AO_SAR_ADC>, - <&clkc_AO CLKID_AO_SAR_ADC_CLK>, - <&clkc_AO CLKID_AO_SAR_ADC_SEL>; - clock-names = "clkin", "core", "adc_clk", "adc_sel"; - status = "disabled"; - }; + opp-1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <731000>; }; - vpu: vpu@ff900000 { - compatible = "amlogic,meson-g12a-vpu"; - reg = <0x0 0xff900000 0x0 0x100000>, - <0x0 0xff63c000 0x0 0x1000>; - reg-names = "vpu", "hhi"; - interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>; - #address-cells = <1>; - #size-cells = <0>; - amlogic,canvas = <&canvas>; - power-domains = <&pwrc_vpu>; - - /* CVBS VDAC output port */ - cvbs_vdac_port: port@0 { - reg = <0>; - }; - - /* HDMI-TX output port */ - hdmi_tx_port: port@1 { - reg = <1>; - - hdmi_tx_out: endpoint { - remote-endpoint = <&hdmi_tx_in>; - }; - }; + opp-1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <731000>; }; - gic: interrupt-controller@ffc01000 { - compatible = "arm,gic-400"; - reg = <0x0 0xffc01000 0 0x1000>, - <0x0 0xffc02000 0 0x2000>, - <0x0 0xffc04000 0 0x2000>, - <0x0 0xffc06000 0 0x2000>; - interrupt-controller; - interrupts = <GIC_PPI 9 - (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>; - #interrupt-cells = <3>; - #address-cells = <0>; + opp-1398000000 { + opp-hz = /bits/ 64 <1398000000>; + opp-microvolt = <761000>; }; - cbus: bus@ffd00000 { - compatible = "simple-bus"; - reg = <0x0 0xffd00000 0x0 0x100000>; - #address-cells = <2>; - #size-cells = <2>; - ranges = <0x0 0x0 0x0 0xffd00000 0x0 0x100000>; - - reset: reset-controller@1004 { - compatible = "amlogic,meson-g12a-reset", - "amlogic,meson-axg-reset"; - reg = <0x0 0x1004 0x0 0x9c>; - #reset-cells = <1>; - }; - - gpio_intc: interrupt-controller@f080 { - compatible = "amlogic,meson-g12a-gpio-intc", - "amlogic,meson-gpio-intc"; - reg = <0x0 0xf080 0x0 0x10>; - interrupt-controller; - #interrupt-cells = <2>; - amlogic,channel-interrupts = <64 65 66 67 68 69 70 71>; - }; - - pwm_ef: pwm@19000 { - compatible = "amlogic,meson-g12a-ee-pwm"; - reg = <0x0 0x19000 0x0 0x20>; - #pwm-cells = <3>; - status = "disabled"; - }; - - pwm_cd: pwm@1a000 { - compatible = "amlogic,meson-g12a-ee-pwm"; - reg = <0x0 0x1a000 0x0 0x20>; - #pwm-cells = <3>; - status = "disabled"; - }; - - pwm_ab: pwm@1b000 { - compatible = "amlogic,meson-g12a-ee-pwm"; - reg = <0x0 0x1b000 0x0 0x20>; - #pwm-cells = <3>; - status = "disabled"; - }; - - i2c3: i2c@1c000 { - compatible = "amlogic,meson-axg-i2c"; - status = "disabled"; - reg = <0x0 0x1c000 0x0 0x20>; - interrupts = <GIC_SPI 39 IRQ_TYPE_EDGE_RISING>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&clkc CLKID_I2C>; - }; - - i2c2: i2c@1d000 { - compatible = "amlogic,meson-axg-i2c"; - status = "disabled"; - reg = <0x0 0x1d000 0x0 0x20>; - interrupts = <GIC_SPI 215 IRQ_TYPE_EDGE_RISING>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&clkc CLKID_I2C>; - }; - - i2c1: i2c@1e000 { - compatible = "amlogic,meson-axg-i2c"; - status = "disabled"; - reg = <0x0 0x1e000 0x0 0x20>; - interrupts = <GIC_SPI 214 IRQ_TYPE_EDGE_RISING>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&clkc CLKID_I2C>; - }; - - i2c0: i2c@1f000 { - compatible = "amlogic,meson-axg-i2c"; - status = "disabled"; - reg = <0x0 0x1f000 0x0 0x20>; - interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&clkc CLKID_I2C>; - }; - - clk_msr: clock-measure@18000 { - compatible = "amlogic,meson-g12a-clk-measure"; - reg = <0x0 0x18000 0x0 0x10>; - }; - - uart_C: serial@22000 { - compatible = "amlogic,meson-gx-uart"; - reg = <0x0 0x22000 0x0 0x18>; - interrupts = <GIC_SPI 93 IRQ_TYPE_EDGE_RISING>; - clocks = <&xtal>, <&clkc CLKID_UART2>, <&xtal>; - clock-names = "xtal", "pclk", "baud"; - status = "disabled"; - }; - - uart_B: serial@23000 { - compatible = "amlogic,meson-gx-uart"; - reg = <0x0 0x23000 0x0 0x18>; - interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>; - clocks = <&xtal>, <&clkc CLKID_UART1>, <&xtal>; - clock-names = "xtal", "pclk", "baud"; - status = "disabled"; - }; - - uart_A: serial@24000 { - compatible = "amlogic,meson-gx-uart"; - reg = <0x0 0x24000 0x0 0x18>; - interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>; - clocks = <&xtal>, <&clkc CLKID_UART0>, <&xtal>; - clock-names = "xtal", "pclk", "baud"; - status = "disabled"; - }; + opp-1512000000 { + opp-hz = /bits/ 64 <1512000000>; + opp-microvolt = <791000>; }; - sd_emmc_a: sd@ffe03000 { - compatible = "amlogic,meson-axg-mmc"; - reg = <0x0 0xffe03000 0x0 0x800>; - interrupts = <GIC_SPI 189 IRQ_TYPE_EDGE_RISING>; - status = "disabled"; - clocks = <&clkc CLKID_SD_EMMC_A>, - <&clkc CLKID_SD_EMMC_A_CLK0>, - <&clkc CLKID_FCLK_DIV2>; - clock-names = "core", "clkin0", "clkin1"; - resets = <&reset RESET_SD_EMMC_A>; - amlogic,dram-access-quirk; + opp-1608000000 { + opp-hz = /bits/ 64 <1608000000>; + opp-microvolt = <831000>; }; - sd_emmc_b: sd@ffe05000 { - compatible = "amlogic,meson-axg-mmc"; - reg = <0x0 0xffe05000 0x0 0x800>; - interrupts = <GIC_SPI 190 IRQ_TYPE_EDGE_RISING>; - status = "disabled"; - clocks = <&clkc CLKID_SD_EMMC_B>, - <&clkc CLKID_SD_EMMC_B_CLK0>, - <&clkc CLKID_FCLK_DIV2>; - clock-names = "core", "clkin0", "clkin1"; - resets = <&reset RESET_SD_EMMC_B>; + opp-1704000000 { + opp-hz = /bits/ 64 <1704000000>; + opp-microvolt = <861000>; }; - sd_emmc_c: mmc@ffe07000 { - compatible = "amlogic,meson-axg-mmc"; - reg = <0x0 0xffe07000 0x0 0x800>; - interrupts = <GIC_SPI 191 IRQ_TYPE_EDGE_RISING>; - status = "disabled"; - clocks = <&clkc CLKID_SD_EMMC_C>, - <&clkc CLKID_SD_EMMC_C_CLK0>, - <&clkc CLKID_FCLK_DIV2>; - clock-names = "core", "clkin0", "clkin1"; - resets = <&reset RESET_SD_EMMC_C>; + opp-1800000000 { + opp-hz = /bits/ 64 <1800000000>; + opp-microvolt = <981000>; }; + }; +}; - usb: usb@ffe09000 { - status = "disabled"; - compatible = "amlogic,meson-g12a-usb-ctrl"; - reg = <0x0 0xffe09000 0x0 0xa0>; - interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <2>; - #size-cells = <2>; - ranges; - - clocks = <&clkc CLKID_USB>; - resets = <&reset RESET_USB>; - - dr_mode = "otg"; - - phys = <&usb2_phy0>, <&usb2_phy1>, - <&usb3_pcie_phy PHY_TYPE_USB3>; - phy-names = "usb2-phy0", "usb2-phy1", "usb3-phy0"; - - dwc2: usb@ff400000 { - compatible = "amlogic,meson-g12a-usb", "snps,dwc2"; - reg = <0x0 0xff400000 0x0 0x40000>; - interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clkc CLKID_USB1_DDR_BRIDGE>; - clock-names = "ddr"; - phys = <&usb2_phy1>; - dr_mode = "peripheral"; - g-rx-fifo-size = <192>; - g-np-tx-fifo-size = <128>; - g-tx-fifo-size = <128 128 16 16 16>; - }; - - dwc3: usb@ff500000 { - compatible = "snps,dwc3"; - reg = <0x0 0xff500000 0x0 0x100000>; - interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; - dr_mode = "host"; - snps,dis_u2_susphy_quirk; - snps,quirk-frame-length-adjustment; - }; +&cpu_thermal { + cooling-maps { + map0 { + trip = <&cpu_passive>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; - mali: gpu@ffe40000 { - compatible = "amlogic,meson-g12a-mali", "arm,mali-bifrost"; - reg = <0x0 0xffe40000 0x0 0x40000>; - interrupt-parent = <&gic>; - interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "gpu", "mmu", "job"; - clocks = <&clkc CLKID_MALI>; - resets = <&reset RESET_DVALIN_CAPB3>, <&reset RESET_DVALIN>; - - /* - * Mali clocking is provided by two identical clock paths - * MALI_0 and MALI_1 muxed to a single clock by a glitch - * free mux to safely change frequency while running. - */ - assigned-clocks = <&clkc CLKID_MALI_0_SEL>, - <&clkc CLKID_MALI_0>, - <&clkc CLKID_MALI>; /* Glitch free mux */ - assigned-clock-parents = <&clkc CLKID_FCLK_DIV2P5>, - <0>, /* Do Nothing */ - <&clkc CLKID_MALI_0>; - assigned-clock-rates = <0>, /* Do Nothing */ - <800000000>, - <0>; /* Do Nothing */ + map1 { + trip = <&cpu_hot>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; }; - - timer { - compatible = "arm,armv8-timer"; - interrupts = <GIC_PPI 13 - (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 14 - (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 11 - (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 10 - (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>; - }; - - xtal: xtal-clk { - compatible = "fixed-clock"; - clock-frequency = <24000000>; - clock-output-names = "xtal"; - #clock-cells = <0>; - }; - }; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-a311d-khadas-vim3.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-a311d-khadas-vim3.dts new file mode 100644 index 000000000000..124a80901084 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-a311d-khadas-vim3.dts @@ -0,0 +1,41 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 BayLibre, SAS + * Author: Neil Armstrong <narmstrong@baylibre.com> + * Copyright (c) 2019 Christian Hewitt <christianshewitt@gmail.com> + */ + +/dts-v1/; + +#include "meson-g12b-a311d.dtsi" +#include "meson-khadas-vim3.dtsi" +#include "meson-g12b-khadas-vim3.dtsi" + +/ { + compatible = "khadas,vim3", "amlogic,a311d", "amlogic,g12b"; +}; + +/* + * The VIM3 on-board MCU can mux the PCIe/USB3.0 shared differential + * lines using a FUSB340TMX USB 3.1 SuperSpeed Data Switch between + * an USB3.0 Type A connector and a M.2 Key M slot. + * The PHY driving these differential lines is shared between + * the USB3.0 controller and the PCIe Controller, thus only + * a single controller can use it. + * If the MCU is configured to mux the PCIe/USB3.0 differential lines + * to the M.2 Key M slot, uncomment the following block to disable + * USB3.0 from the USB Complex and enable the PCIe controller. + * The End User is not expected to uncomment the following except for + * testing purposes, but instead rely on the firmware/bootloader to + * update these nodes accordingly if PCIe mode is selected by the MCU. + */ +/* +&pcie { + status = "okay"; +}; + +&usb { + phys = <&usb2_phy0>, <&usb2_phy1>; + phy-names = "usb2-phy0", "usb2-phy1"; +}; + */ diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-a311d.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-a311d.dtsi new file mode 100644 index 000000000000..d61f43052a34 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-a311d.dtsi @@ -0,0 +1,149 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 BayLibre, SAS + * Author: Neil Armstrong <narmstrong@baylibre.com> + */ + +#include "meson-g12b.dtsi" + +/ { + cpu_opp_table_0: opp-table-0 { + compatible = "operating-points-v2"; + opp-shared; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + opp-microvolt = <731000>; + }; + + opp-250000000 { + opp-hz = /bits/ 64 <250000000>; + opp-microvolt = <731000>; + }; + + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + opp-microvolt = <731000>; + }; + + opp-667000000 { + opp-hz = /bits/ 64 <667000000>; + opp-microvolt = <731000>; + }; + + opp-1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <761000>; + }; + + opp-1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <781000>; + }; + + opp-1398000000 { + opp-hz = /bits/ 64 <1398000000>; + opp-microvolt = <811000>; + }; + + opp-1512000000 { + opp-hz = /bits/ 64 <1512000000>; + opp-microvolt = <861000>; + }; + + opp-1608000000 { + opp-hz = /bits/ 64 <1608000000>; + opp-microvolt = <901000>; + }; + + opp-1704000000 { + opp-hz = /bits/ 64 <1704000000>; + opp-microvolt = <951000>; + }; + + opp-1800000000 { + opp-hz = /bits/ 64 <1800000000>; + opp-microvolt = <1001000>; + }; + }; + + cpub_opp_table_1: opp-table-1 { + compatible = "operating-points-v2"; + opp-shared; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + opp-microvolt = <731000>; + }; + + opp-250000000 { + opp-hz = /bits/ 64 <250000000>; + opp-microvolt = <731000>; + }; + + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + opp-microvolt = <731000>; + }; + + opp-667000000 { + opp-hz = /bits/ 64 <667000000>; + opp-microvolt = <731000>; + }; + + opp-1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <731000>; + }; + + opp-1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <751000>; + }; + + opp-1398000000 { + opp-hz = /bits/ 64 <1398000000>; + opp-microvolt = <771000>; + }; + + opp-1512000000 { + opp-hz = /bits/ 64 <1512000000>; + opp-microvolt = <771000>; + }; + + opp-1608000000 { + opp-hz = /bits/ 64 <1608000000>; + opp-microvolt = <781000>; + }; + + opp-1704000000 { + opp-hz = /bits/ 64 <1704000000>; + opp-microvolt = <791000>; + }; + + opp-1800000000 { + opp-hz = /bits/ 64 <1800000000>; + opp-microvolt = <831000>; + }; + + opp-1908000000 { + opp-hz = /bits/ 64 <1908000000>; + opp-microvolt = <861000>; + }; + + opp-2016000000 { + opp-hz = /bits/ 64 <2016000000>; + opp-microvolt = <911000>; + }; + + opp-2108000000 { + opp-hz = /bits/ 64 <2108000000>; + opp-microvolt = <951000>; + }; + + opp-2208000000 { + opp-hz = /bits/ 64 <2208000000>; + opp-microvolt = <1011000>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi new file mode 100644 index 000000000000..554863429aa6 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi @@ -0,0 +1,189 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 BayLibre, SAS + * Author: Neil Armstrong <narmstrong@baylibre.com> + * Copyright (c) 2019 Christian Hewitt <christianshewitt@gmail.com> + */ + +#include <dt-bindings/sound/meson-g12a-tohdmitx.h> + +/ { + vddcpu_a: regulator-vddcpu-a { + /* + * MP8756GD Regulator. + */ + compatible = "pwm-regulator"; + + regulator-name = "VDDCPU_A"; + regulator-min-microvolt = <690000>; + regulator-max-microvolt = <1050000>; + + vin-supply = <&dc_in>; + + pwms = <&pwm_ab 0 1250 0>; + pwm-dutycycle-range = <100 0>; + + regulator-boot-on; + regulator-always-on; + }; + + vddcpu_b: regulator-vddcpu-b { + /* + * Silergy SY8030DEC Regulator. + */ + compatible = "pwm-regulator"; + + regulator-name = "VDDCPU_B"; + regulator-min-microvolt = <690000>; + regulator-max-microvolt = <1050000>; + + vin-supply = <&vsys_3v3>; + + pwms = <&pwm_AO_cd 1 1250 0>; + pwm-dutycycle-range = <100 0>; + + regulator-boot-on; + regulator-always-on; + }; + + sound { + compatible = "amlogic,axg-sound-card"; + model = "G12A-KHADAS-VIM3"; + audio-aux-devs = <&tdmout_b>; + audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1", + "TDMOUT_B IN 1", "FRDDR_B OUT 1", + "TDMOUT_B IN 2", "FRDDR_C OUT 1", + "TDM_B Playback", "TDMOUT_B OUT"; + + assigned-clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + assigned-clock-parents = <0>, <0>, <0>; + assigned-clock-rates = <294912000>, + <270950400>, + <393216000>; + status = "okay"; + + dai-link-0 { + sound-dai = <&frddr_a>; + }; + + dai-link-1 { + sound-dai = <&frddr_b>; + }; + + dai-link-2 { + sound-dai = <&frddr_c>; + }; + + /* 8ch hdmi interface */ + dai-link-3 { + sound-dai = <&tdmif_b>; + dai-format = "i2s"; + dai-tdm-slot-tx-mask-0 = <1 1>; + dai-tdm-slot-tx-mask-1 = <1 1>; + dai-tdm-slot-tx-mask-2 = <1 1>; + dai-tdm-slot-tx-mask-3 = <1 1>; + mclk-fs = <256>; + + codec { + sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>; + }; + }; + + /* hdmi glue */ + dai-link-4 { + sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>; + + codec { + sound-dai = <&hdmi_tx>; + }; + }; + }; +}; + +&arb { + status = "okay"; +}; + +&clkc_audio { + status = "okay"; +}; + +&cpu0 { + cpu-supply = <&vddcpu_b>; + operating-points-v2 = <&cpu_opp_table_0>; + clocks = <&clkc CLKID_CPU_CLK>; + clock-latency = <50000>; +}; + +&cpu1 { + cpu-supply = <&vddcpu_b>; + operating-points-v2 = <&cpu_opp_table_0>; + clocks = <&clkc CLKID_CPU_CLK>; + clock-latency = <50000>; +}; + +&cpu100 { + cpu-supply = <&vddcpu_a>; + operating-points-v2 = <&cpub_opp_table_1>; + clocks = <&clkc CLKID_CPUB_CLK>; + clock-latency = <50000>; +}; + +&cpu101 { + cpu-supply = <&vddcpu_a>; + operating-points-v2 = <&cpub_opp_table_1>; + clocks = <&clkc CLKID_CPUB_CLK>; + clock-latency = <50000>; +}; + +&cpu102 { + cpu-supply = <&vddcpu_a>; + operating-points-v2 = <&cpub_opp_table_1>; + clocks = <&clkc CLKID_CPUB_CLK>; + clock-latency = <50000>; +}; + +&cpu103 { + cpu-supply = <&vddcpu_a>; + operating-points-v2 = <&cpub_opp_table_1>; + clocks = <&clkc CLKID_CPUB_CLK>; + clock-latency = <50000>; +}; + +&frddr_b { + status = "okay"; +}; + +&frddr_c { + status = "okay"; +}; + +&pwm_ab { + pinctrl-0 = <&pwm_a_e_pins>; + pinctrl-names = "default"; + clocks = <&xtal>; + clock-names = "clkin0"; + status = "okay"; +}; + +&pwm_AO_cd { + pinctrl-0 = <&pwm_ao_d_e_pins>; + pinctrl-names = "default"; + clocks = <&xtal>; + clock-names = "clkin1"; + status = "okay"; +}; + +&tdmif_b { + status = "okay"; +}; + +&tdmout_b { + status = "okay"; +}; + +&tohdmitx { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts index 81780ffcc7f0..0e54c1dc2842 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts @@ -6,13 +6,13 @@ /dts-v1/; -#include "meson-g12b.dtsi" +#include "meson-g12b-s922x.dtsi" #include <dt-bindings/input/input.h> #include <dt-bindings/gpio/meson-g12a-gpio.h> #include <dt-bindings/sound/meson-g12a-tohdmitx.h> / { - compatible = "hardkernel,odroid-n2", "amlogic,g12b"; + compatible = "hardkernel,odroid-n2", "amlogic,s922x", "amlogic,g12b"; model = "Hardkernel ODROID-N2"; aliases { @@ -53,6 +53,7 @@ gpio = <&gpio_ao GPIOAO_8 GPIO_ACTIVE_HIGH>; enable-active-high; + regulator-always-on; }; tf_io: gpio-regulator-tf_io { @@ -65,8 +66,8 @@ gpios = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_HIGH>; gpios-states = <0>; - states = <3300000 0 - 1800000 1>; + states = <3300000 0>, + <1800000 1>; }; flash_1v8: regulator-flash_1v8 { @@ -114,6 +115,44 @@ /* FIXME: actually controlled by VDDCPU_B_EN */ }; + vddcpu_a: regulator-vddcpu-a { + /* + * MP8756GD Regulator. + */ + compatible = "pwm-regulator"; + + regulator-name = "VDDCPU_A"; + regulator-min-microvolt = <721000>; + regulator-max-microvolt = <1022000>; + + vin-supply = <&main_12v>; + + pwms = <&pwm_ab 0 1250 0>; + pwm-dutycycle-range = <100 0>; + + regulator-boot-on; + regulator-always-on; + }; + + vddcpu_b: regulator-vddcpu-b { + /* + * Silergy SY8120B1ABC Regulator. + */ + compatible = "pwm-regulator"; + + regulator-name = "VDDCPU_B"; + regulator-min-microvolt = <721000>; + regulator-max-microvolt = <1022000>; + + vin-supply = <&main_12v>; + + pwms = <&pwm_AO_cd 1 1250 0>; + pwm-dutycycle-range = <100 0>; + + regulator-boot-on; + regulator-always-on; + }; + hub_5v: regulator-hub_5v { compatible = "regulator-fixed"; regulator-name = "HUB_5V"; @@ -245,6 +284,48 @@ status = "okay"; }; +&cpu0 { + cpu-supply = <&vddcpu_b>; + operating-points-v2 = <&cpu_opp_table_0>; + clocks = <&clkc CLKID_CPU_CLK>; + clock-latency = <50000>; +}; + +&cpu1 { + cpu-supply = <&vddcpu_b>; + operating-points-v2 = <&cpu_opp_table_0>; + clocks = <&clkc CLKID_CPU_CLK>; + clock-latency = <50000>; +}; + +&cpu100 { + cpu-supply = <&vddcpu_a>; + operating-points-v2 = <&cpub_opp_table_1>; + clocks = <&clkc CLKID_CPUB_CLK>; + clock-latency = <50000>; +}; + +&cpu101 { + cpu-supply = <&vddcpu_a>; + operating-points-v2 = <&cpub_opp_table_1>; + clocks = <&clkc CLKID_CPUB_CLK>; + clock-latency = <50000>; +}; + +&cpu102 { + cpu-supply = <&vddcpu_a>; + operating-points-v2 = <&cpub_opp_table_1>; + clocks = <&clkc CLKID_CPUB_CLK>; + clock-latency = <50000>; +}; + +&cpu103 { + cpu-supply = <&vddcpu_a>; + operating-points-v2 = <&cpub_opp_table_1>; + clocks = <&clkc CLKID_CPUB_CLK>; + clock-latency = <50000>; +}; + &ext_mdio { external_phy: ethernet-phy@0 { /* Realtek RTL8211F (0x001cc916) */ @@ -314,6 +395,23 @@ status = "okay"; pinctrl-0 = <&remote_input_ao_pins>; pinctrl-names = "default"; + linux,rc-map-name = "rc-odroid"; +}; + +&pwm_ab { + pinctrl-0 = <&pwm_a_e_pins>; + pinctrl-names = "default"; + clocks = <&xtal>; + clock-names = "clkin0"; + status = "okay"; +}; + +&pwm_AO_cd { + pinctrl-0 = <&pwm_ao_d_e_pins>; + pinctrl-names = "default"; + clocks = <&xtal>; + clock-names = "clkin1"; + status = "okay"; }; /* SD card */ diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-s922x-khadas-vim3.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-s922x-khadas-vim3.dts new file mode 100644 index 000000000000..bba98f982ad6 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-s922x-khadas-vim3.dts @@ -0,0 +1,41 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 BayLibre, SAS + * Author: Neil Armstrong <narmstrong@baylibre.com> + * Copyright (c) 2019 Christian Hewitt <christianshewitt@gmail.com> + */ + +/dts-v1/; + +#include "meson-g12b-s922x.dtsi" +#include "meson-khadas-vim3.dtsi" +#include "meson-g12b-khadas-vim3.dtsi" + +/ { + compatible = "khadas,vim3", "amlogic,s922x", "amlogic,g12b"; +}; + +/* + * The VIM3 on-board MCU can mux the PCIe/USB3.0 shared differential + * lines using a FUSB340TMX USB 3.1 SuperSpeed Data Switch between + * an USB3.0 Type A connector and a M.2 Key M slot. + * The PHY driving these differential lines is shared between + * the USB3.0 controller and the PCIe Controller, thus only + * a single controller can use it. + * If the MCU is configured to mux the PCIe/USB3.0 differential lines + * to the M.2 Key M slot, uncomment the following block to disable + * USB3.0 from the USB Complex and enable the PCIe controller. + * The End User is not expected to uncomment the following except for + * testing purposes, but instead rely on the firmware/bootloader to + * update these nodes accordingly if PCIe mode is selected by the MCU. + */ +/* +&pcie { + status = "okay"; +}; + +&usb { + phys = <&usb2_phy0>, <&usb2_phy1>; + phy-names = "usb2-phy0", "usb2-phy1"; +}; + */ diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-s922x.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-s922x.dtsi new file mode 100644 index 000000000000..046cc332d07f --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-s922x.dtsi @@ -0,0 +1,124 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 BayLibre, SAS + * Author: Neil Armstrong <narmstrong@baylibre.com> + */ + +#include "meson-g12b.dtsi" + +/ { + cpu_opp_table_0: opp-table-0 { + compatible = "operating-points-v2"; + opp-shared; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + opp-microvolt = <731000>; + }; + + opp-250000000 { + opp-hz = /bits/ 64 <250000000>; + opp-microvolt = <731000>; + }; + + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + opp-microvolt = <731000>; + }; + + opp-667000000 { + opp-hz = /bits/ 64 <667000000>; + opp-microvolt = <731000>; + }; + + opp-1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <731000>; + }; + + opp-1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <731000>; + }; + + opp-1398000000 { + opp-hz = /bits/ 64 <1398000000>; + opp-microvolt = <761000>; + }; + + opp-1512000000 { + opp-hz = /bits/ 64 <1512000000>; + opp-microvolt = <791000>; + }; + + opp-1608000000 { + opp-hz = /bits/ 64 <1608000000>; + opp-microvolt = <831000>; + }; + + opp-1704000000 { + opp-hz = /bits/ 64 <1704000000>; + opp-microvolt = <861000>; + }; + + opp-1896000000 { + opp-hz = /bits/ 64 <1896000000>; + opp-microvolt = <981000>; + }; + }; + + cpub_opp_table_1: opp-table-1 { + compatible = "operating-points-v2"; + opp-shared; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + opp-microvolt = <751000>; + }; + + opp-250000000 { + opp-hz = /bits/ 64 <250000000>; + opp-microvolt = <751000>; + }; + + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + opp-microvolt = <751000>; + }; + + opp-667000000 { + opp-hz = /bits/ 64 <667000000>; + opp-microvolt = <751000>; + }; + + opp-1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <771000>; + }; + + opp-1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <771000>; + }; + + opp-1398000000 { + opp-hz = /bits/ 64 <1398000000>; + opp-microvolt = <791000>; + }; + + opp-1512000000 { + opp-hz = /bits/ 64 <1512000000>; + opp-microvolt = <821000>; + }; + + opp-1608000000 { + opp-hz = /bits/ 64 <1608000000>; + opp-microvolt = <861000>; + }; + + opp-1704000000 { + opp-hz = /bits/ 64 <1704000000>; + opp-microvolt = <891000>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts new file mode 100644 index 000000000000..ccd0bced01e8 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts @@ -0,0 +1,557 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 BayLibre, SAS + * Author: Neil Armstrong <narmstrong@baylibre.com> + * Copyright (c) 2019 Christian Hewitt <christianshewitt@gmail.com> + */ + +/dts-v1/; + +#include "meson-g12b.dtsi" +#include "meson-g12b-s922x.dtsi" +#include <dt-bindings/input/input.h> +#include <dt-bindings/gpio/meson-g12a-gpio.h> +#include <dt-bindings/sound/meson-g12a-tohdmitx.h> + +/ { + compatible = "ugoos,am6", "amlogic,g12b"; + model = "Ugoos AM6"; + + aliases { + serial0 = &uart_AO; + ethernet0 = ðmac; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x40000000>; + }; + + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>; + clocks = <&wifi32k>; + clock-names = "ext_clock"; + }; + + spdif_dit: audio-codec-1 { + #sound-dai-cells = <0>; + compatible = "linux,spdif-dit"; + status = "okay"; + sound-name-prefix = "DIT"; + }; + + flash_1v8: regulator-flash_1v8 { + compatible = "regulator-fixed"; + regulator-name = "FLASH_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_3v3>; + regulator-always-on; + }; + + main_12v: regulator-main_12v { + compatible = "regulator-fixed"; + regulator-name = "12V"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-always-on; + }; + + vcc_5v: regulator-vcc_5v { + compatible = "regulator-fixed"; + regulator-name = "VCC_5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&main_12v>; + + gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>; + enable-active-high; + }; + + vcc_1v8: regulator-vcc_1v8 { + compatible = "regulator-fixed"; + regulator-name = "VCC_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_3v3>; + regulator-always-on; + }; + + vcc_3v3: regulator-vcc_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VCC_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vddao_3v3>; + regulator-always-on; + /* FIXME: actually controlled by VDDCPU_B_EN */ + }; + + vddcpu_a: regulator-vddcpu-a { + /* + * MP1653 Regulator. + */ + compatible = "pwm-regulator"; + + regulator-name = "VDDCPU_A"; + regulator-min-microvolt = <721000>; + regulator-max-microvolt = <1022000>; + + vin-supply = <&main_12v>; + + pwms = <&pwm_ab 0 1250 0>; + pwm-dutycycle-range = <100 0>; + + regulator-boot-on; + regulator-always-on; + }; + + vddcpu_b: regulator-vddcpu-b { + /* + * MP1652 Regulator. + */ + compatible = "pwm-regulator"; + + regulator-name = "VDDCPU_B"; + regulator-min-microvolt = <721000>; + regulator-max-microvolt = <1022000>; + + vin-supply = <&main_12v>; + + pwms = <&pwm_AO_cd 1 1250 0>; + pwm-dutycycle-range = <100 0>; + + regulator-boot-on; + regulator-always-on; + }; + + usb1_pow: regulator-usb1-pow { + compatible = "regulator-fixed"; + regulator-name = "USB1_POW"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc_5v>; + + /* connected to SY6280A Power Switch */ + gpio = <&gpio GPIOA_8 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + usb_pwr_en: regulator-usb-pwr-en { + compatible = "regulator-fixed"; + regulator-name = "USB_PWR_EN"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc_5v>; + + /* Connected to USB3 Type-A Port power enable */ + gpio = <&gpio GPIOAO_7 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vddao_1v8: regulator-vddao-1v8 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vddao_3v3>; + regulator-always-on; + }; + + vddao_3v3: regulator-vddao-3v3 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&main_12v>; + regulator-always-on; + }; + + cvbs-connector { + compatible = "composite-video-connector"; + + port { + cvbs_connector_in: endpoint { + remote-endpoint = <&cvbs_vdac_out>; + }; + }; + }; + + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_tx_tmds_out>; + }; + }; + }; + + sound { + compatible = "amlogic,axg-sound-card"; + model = "G12B-UGOOS-AM6"; + audio-aux-devs = <&tdmout_b>; + audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1", + "TDMOUT_B IN 1", "FRDDR_B OUT 1", + "TDMOUT_B IN 2", "FRDDR_C OUT 1", + "TDM_B Playback", "TDMOUT_B OUT", + "SPDIFOUT IN 0", "FRDDR_A OUT 3", + "SPDIFOUT IN 1", "FRDDR_B OUT 3", + "SPDIFOUT IN 2", "FRDDR_C OUT 3"; + + assigned-clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + assigned-clock-parents = <0>, <0>, <0>; + assigned-clock-rates = <294912000>, + <270950400>, + <393216000>; + status = "okay"; + + dai-link-0 { + sound-dai = <&frddr_a>; + }; + + dai-link-1 { + sound-dai = <&frddr_b>; + }; + + dai-link-2 { + sound-dai = <&frddr_c>; + }; + + /* 8ch hdmi interface */ + dai-link-3 { + sound-dai = <&tdmif_b>; + dai-format = "i2s"; + dai-tdm-slot-tx-mask-0 = <1 1>; + dai-tdm-slot-tx-mask-1 = <1 1>; + dai-tdm-slot-tx-mask-2 = <1 1>; + dai-tdm-slot-tx-mask-3 = <1 1>; + mclk-fs = <256>; + + codec { + sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>; + }; + }; + + /* spdif hdmi or toslink interface */ + dai-link-4 { + sound-dai = <&spdifout>; + + codec-0 { + sound-dai = <&spdif_dit>; + }; + + codec-1 { + sound-dai = <&tohdmitx TOHDMITX_SPDIF_IN_A>; + }; + }; + + /* spdif hdmi interface */ + dai-link-5 { + sound-dai = <&spdifout_b>; + + codec { + sound-dai = <&tohdmitx TOHDMITX_SPDIF_IN_B>; + }; + }; + + /* hdmi glue */ + dai-link-6 { + sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>; + + codec { + sound-dai = <&hdmi_tx>; + }; + }; + }; + + wifi32k: wifi32k { + compatible = "pwm-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */ + }; +}; + +&arb { + status = "okay"; +}; + +&cec_AO { + pinctrl-0 = <&cec_ao_a_h_pins>; + pinctrl-names = "default"; + status = "disabled"; + hdmi-phandle = <&hdmi_tx>; +}; + +&cecb_AO { + pinctrl-0 = <&cec_ao_b_h_pins>; + pinctrl-names = "default"; + status = "okay"; + hdmi-phandle = <&hdmi_tx>; +}; + +&clkc_audio { + status = "okay"; +}; + +&cpu0 { + cpu-supply = <&vddcpu_b>; + operating-points-v2 = <&cpu_opp_table_0>; + clocks = <&clkc CLKID_CPU_CLK>; + clock-latency = <50000>; +}; + +&cpu1 { + cpu-supply = <&vddcpu_b>; + operating-points-v2 = <&cpu_opp_table_0>; + clocks = <&clkc CLKID_CPU_CLK>; + clock-latency = <50000>; +}; + +&cpu100 { + cpu-supply = <&vddcpu_a>; + operating-points-v2 = <&cpub_opp_table_1>; + clocks = <&clkc CLKID_CPUB_CLK>; + clock-latency = <50000>; +}; + +&cpu101 { + cpu-supply = <&vddcpu_a>; + operating-points-v2 = <&cpub_opp_table_1>; + clocks = <&clkc CLKID_CPUB_CLK>; + clock-latency = <50000>; +}; + +&cpu102 { + cpu-supply = <&vddcpu_a>; + operating-points-v2 = <&cpub_opp_table_1>; + clocks = <&clkc CLKID_CPUB_CLK>; + clock-latency = <50000>; +}; + +&cpu103 { + cpu-supply = <&vddcpu_a>; + operating-points-v2 = <&cpub_opp_table_1>; + clocks = <&clkc CLKID_CPUB_CLK>; + clock-latency = <50000>; +}; + +&cvbs_vdac_port { + cvbs_vdac_out: endpoint { + remote-endpoint = <&cvbs_connector_in>; + }; +}; + +&ext_mdio { + external_phy: ethernet-phy@0 { + /* Realtek RTL8211F (0x001cc916) */ + reg = <0>; + max-speed = <1000>; + + reset-assert-us = <10000>; + reset-deassert-us = <30000>; + reset-gpios = <&gpio GPIOZ_15 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>; + + interrupt-parent = <&gpio_intc>; + /* MAC_INTR on GPIOZ_14 */ + interrupts = <26 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +ðmac { + pinctrl-0 = <ð_pins>, <ð_rgmii_pins>; + pinctrl-names = "default"; + status = "okay"; + phy-mode = "rgmii"; + phy-handle = <&external_phy>; + amlogic,tx-delay-ns = <2>; +}; + +&frddr_a { + status = "okay"; +}; + +&frddr_b { + status = "okay"; +}; + +&frddr_c { + status = "okay"; +}; + +&hdmi_tx { + status = "okay"; + pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>; + pinctrl-names = "default"; + hdmi-supply = <&vcc_5v>; +}; + +&hdmi_tx_tmds_port { + hdmi_tx_tmds_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; +}; + +&ir { + status = "okay"; + pinctrl-0 = <&remote_input_ao_pins>; + pinctrl-names = "default"; + linux,rc-map-name = "rc-khadas"; +}; + +&pwm_ab { + pinctrl-0 = <&pwm_a_e_pins>; + pinctrl-names = "default"; + clocks = <&xtal>; + clock-names = "clkin0"; + status = "okay"; +}; + +&pwm_AO_cd { + pinctrl-0 = <&pwm_ao_d_e_pins>; + pinctrl-names = "default"; + clocks = <&xtal>; + clock-names = "clkin1"; + status = "okay"; +}; + +&pwm_ef { + pinctrl-0 = <&pwm_e_pins>; + pinctrl-names = "default"; + clocks = <&xtal>; + clock-names = "clkin0"; + status = "okay"; +}; + +/* SDIO */ +&sd_emmc_a { + status = "okay"; + pinctrl-0 = <&sdio_pins>; + pinctrl-1 = <&sdio_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + #address-cells = <1>; + #size-cells = <0>; + + bus-width = <4>; + cap-sd-highspeed; + sd-uhs-sdr50; + max-frequency = <100000000>; + + non-removable; + disable-wp; + + mmc-pwrseq = <&sdio_pwrseq>; + + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&vddao_1v8>; + + brcmf: wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + }; +}; + +/* SD card */ +&sd_emmc_b { + status = "okay"; + pinctrl-0 = <&sdcard_c_pins>; + pinctrl-1 = <&sdcard_clk_gate_c_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <4>; + cap-sd-highspeed; + max-frequency = <50000000>; + disable-wp; + + cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>; + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&vddao_3v3>; +}; + +/* eMMC */ +&sd_emmc_c { + status = "okay"; + pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>; + pinctrl-1 = <&emmc_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <8>; + cap-mmc-highspeed; + max-frequency = <100000000>; + disable-wp; + + mmc-pwrseq = <&emmc_pwrseq>; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&flash_1v8>; +}; + +&spdifout { + pinctrl-0 = <&spdif_out_h_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&spdifout_b { + status = "okay"; +}; + +&tdmif_b { + status = "okay"; +}; + +&tdmout_b { + status = "okay"; +}; + +&tohdmitx { + status = "okay"; +}; + +&uart_A { + status = "okay"; + pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; + pinctrl-names = "default"; + uart-has-rtscts; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; + max-speed = <2000000>; + clocks = <&wifi32k>; + clock-names = "lpo"; + }; +}; + +&uart_AO { + status = "okay"; + pinctrl-0 = <&uart_ao_a_pins>; + pinctrl-names = "default"; +}; + +&usb { + status = "okay"; + dr_mode = "host"; + vbus-regulator = <&usb_pwr_en>; +}; + +&usb2_phy0 { + phy-supply = <&usb1_pow>; +}; + +&usb2_phy1 { + phy-supply = <&usb1_pow>; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b.dtsi index 9e88e513b22d..6dbc3968045b 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12b.dtsi @@ -4,12 +4,15 @@ * Author: Neil Armstrong <narmstrong@baylibre.com> */ -#include "meson-g12a.dtsi" +#include "meson-g12.dtsi" / { compatible = "amlogic,g12b"; cpus { + #address-cells = <0x2>; + #size-cells = <0x0>; + cpu-map { cluster0 { core0 { @@ -40,15 +43,34 @@ }; }; - /delete-node/ cpu@2; - /delete-node/ cpu@3; + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x0>; + enable-method = "psci"; + capacity-dmips-mhz = <592>; + next-level-cache = <&l2>; + #cooling-cells = <2>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x1>; + enable-method = "psci"; + capacity-dmips-mhz = <592>; + next-level-cache = <&l2>; + #cooling-cells = <2>; + }; cpu100: cpu@100 { device_type = "cpu"; compatible = "arm,cortex-a73"; reg = <0x0 0x100>; enable-method = "psci"; + capacity-dmips-mhz = <1024>; next-level-cache = <&l2>; + #cooling-cells = <2>; }; cpu101: cpu@101 { @@ -56,7 +78,9 @@ compatible = "arm,cortex-a73"; reg = <0x0 0x101>; enable-method = "psci"; + capacity-dmips-mhz = <1024>; next-level-cache = <&l2>; + #cooling-cells = <2>; }; cpu102: cpu@102 { @@ -64,7 +88,9 @@ compatible = "arm,cortex-a73"; reg = <0x0 0x102>; enable-method = "psci"; + capacity-dmips-mhz = <1024>; next-level-cache = <&l2>; + #cooling-cells = <2>; }; cpu103: cpu@103 { @@ -72,7 +98,13 @@ compatible = "arm,cortex-a73"; reg = <0x0 0x103>; enable-method = "psci"; + capacity-dmips-mhz = <1024>; next-level-cache = <&l2>; + #cooling-cells = <2>; + }; + + l2: l2-cache0 { + compatible = "cache"; }; }; }; @@ -80,3 +112,4 @@ &clkc { compatible = "amlogic,g12b-clkc"; }; + diff --git a/arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi new file mode 100644 index 000000000000..248b018c83d5 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi @@ -0,0 +1,375 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2019 BayLibre SAS. + * Author: Jerome Brunet <jbrunet@baylibre.com> + */ + +/* Libretech Amlogic GX PC form factor - AKA: Tartiflette */ + +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> + +/ { + adc-keys { + compatible = "adc-keys"; + io-channels = <&saradc 0>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1800000>; + + update-button { + label = "update"; + linux,code = <KEY_VENDOR>; + press-threshold-microvolt = <1300000>; + }; + }; + + aliases { + serial0 = &uart_AO; + ethernet0 = ðmac; + spi0 = &spifc; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + cvbs-connector { + compatible = "composite-video-connector"; + status = "disabled"; + + port { + cvbs_connector_in: endpoint { + remote-endpoint = <&cvbs_vdac_out>; + }; + }; + }; + + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; + }; + + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_tx_tmds_out>; + }; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + poll-interval = <100>; + + power-button { + label = "power"; + linux,code = <KEY_POWER>; + gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>; + }; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; + }; + + ao_5v: regulator-ao_5v { + compatible = "regulator-fixed"; + regulator-name = "AO_5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&dc_in>; + regulator-always-on; + }; + + dc_in: regulator-dc_in { + compatible = "regulator-fixed"; + regulator-name = "DC_IN"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + leds { + compatible = "gpio-leds"; + + green { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_DISK_ACTIVITY; + gpios = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "disk-activity"; + }; + + blue { + color = <LED_COLOR_ID_BLUE>; + function = LED_FUNCTION_STATUS; + gpios = <&gpio GPIODV_28 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + panic-indicator; + }; + }; + + vcc_card: regulator-vcc_card { + compatible = "regulator-fixed"; + regulator-name = "VCC_CARD"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vddio_ao3v3>; + + gpio = <&gpio GPIODV_4 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vcc5v: regulator-vcc5v { + compatible = "regulator-fixed"; + regulator-name = "VCC5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&ao_5v>; + + gpio = <&gpio GPIOH_3 GPIO_OPEN_DRAIN>; + }; + + vddio_ao18: regulator-vddio_ao18 { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_AO18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&ao_5v>; + regulator-always-on; + }; + + vddio_ao3v3: regulator-vddio_ao3v3 { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_AO3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&ao_5v>; + regulator-always-on; + }; + + vddio_boot: regulator-vddio_boot { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_BOOT"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vddio_ao3v3>; + regulator-always-on; + }; + + vddio_card: regulator-vddio-card { + compatible = "regulator-gpio"; + regulator-name = "VDDIO_CARD"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + gpios = <&gpio GPIODV_5 GPIO_ACTIVE_HIGH>; + gpios-states = <0>; + + states = <3300000 0>, + <1800000 1>; + + regulator-settling-time-up-us = <200>; + regulator-settling-time-down-us = <50000>; + }; +}; + +&cec_AO { + pinctrl-0 = <&ao_cec_pins>; + pinctrl-names = "default"; + hdmi-phandle = <&hdmi_tx>; + status = "okay"; +}; + +&cvbs_vdac_port { + cvbs_vdac_out: endpoint { + remote-endpoint = <&cvbs_connector_in>; + }; +}; + +ðmac { + pinctrl-0 = <ð_pins>, <ð_phy_irq_pins>; + pinctrl-names = "default"; + phy-handle = <&external_phy>; + amlogic,tx-delay-ns = <2>; + phy-mode = "rgmii"; + status = "okay"; +}; + +&external_mdio { + external_phy: ethernet-phy@0 { + reg = <0>; + max-speed = <1000>; + reset-assert-us = <10000>; + reset-deassert-us = <30000>; + reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>; + interrupt-parent = <&gpio_intc>; + interrupts = <25 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&pinctrl_periphs { + /* + * Make sure the reset pin of the usb HUB is driven high to take + * it out of reset. + */ + usb1_rst_pins: usb1_rst_irq { + mux { + groups = "GPIODV_3"; + function = "gpio_periphs"; + bias-disable; + output-high; + }; + }; + + /* Make sure the phy irq pin is properly configured as input */ + eth_phy_irq_pins: eth_phy_irq { + mux { + groups = "GPIOZ_15"; + function = "gpio_periphs"; + bias-disable; + output-disable; + }; + }; +}; + +&hdmi_tx { + pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>; + pinctrl-names = "default"; + hdmi-supply = <&vcc5v>; + status = "okay"; +}; + +&hdmi_tx_tmds_port { + hdmi_tx_tmds_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; +}; + +&ir { + pinctrl-0 = <&remote_input_ao_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&i2c_C { + pinctrl-0 = <&i2c_c_dv18_pins>; + pinctrl-names = "default"; + status = "okay"; + + rtc: rtc@51 { + reg = <0x51>; + compatible = "nxp,pcf8563"; + #clock-cells = <0>; + clock-output-names = "rtc_clkout"; + }; +}; + +&pwm_AO_ab { + pinctrl-0 = <&pwm_ao_a_3_pins>; + pinctrl-names = "default"; + clocks = <&clkc CLKID_FCLK_DIV4>; + clock-names = "clkin0"; + status = "okay"; +}; + +&pwm_ab { + pinctrl-0 = <&pwm_b_pins>; + pinctrl-names = "default"; + clocks = <&clkc CLKID_FCLK_DIV4>; + clock-names = "clkin0"; + status = "okay"; +}; + +&pwm_ef { + pinctrl-0 = <&pwm_e_pins>, <&pwm_f_clk_pins>; + pinctrl-names = "default"; + clocks = <&clkc CLKID_FCLK_DIV4>; + clock-names = "clkin0"; + status = "okay"; +}; + +&saradc { + vref-supply = <&vddio_ao18>; + status = "okay"; +}; + +/* SD card */ +&sd_emmc_b { + pinctrl-0 = <&sdcard_pins>; + pinctrl-1 = <&sdcard_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <4>; + cap-sd-highspeed; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; + sd-uhs-ddr50; + max-frequency = <200000000>; + disable-wp; + + cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>; + + vmmc-supply = <&vcc_card>; + vqmmc-supply = <&vddio_card>; + + status = "okay"; +}; + +/* eMMC */ +&sd_emmc_c { + pinctrl-0 = <&emmc_pins>; + pinctrl-1 = <&emmc_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <8>; + cap-mmc-highspeed; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + max-frequency = <200000000>; + disable-wp; + + mmc-pwrseq = <&emmc_pwrseq>; + vmmc-supply = <&vddio_ao3v3>; + vqmmc-supply = <&vddio_boot>; + + status = "okay"; +}; + +&spifc { + pinctrl-0 = <&nor_pins>; + pinctrl-names = "default"; + status = "okay"; + + gd25lq128: spi-flash@0 { + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0>; + spi-max-frequency = <12000000>; + }; +}; + +&uart_AO { + pinctrl-0 = <&uart_ao_a_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&usb0 { + status = "okay"; +}; + +&usb2_phy0 { + pinctrl-0 = <&usb1_rst_pins>; + pinctrl-names = "default"; + phy-supply = <&vcc5v>; +}; + +&usb2_phy1 { + phy-supply = <&vcc5v>; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi index a9b778571cf5..12d5e333e5f2 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi @@ -169,6 +169,9 @@ non-removable; disable-wp; + /* WiFi firmware requires power to be kept while in suspend */ + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; vmmc-supply = <&vddao_3v3>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi index 74d03fc706be..40db06e28b66 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi @@ -161,6 +161,7 @@ #address-cells = <1>; #size-cells = <1>; read-only; + secure-monitor = <&sm>; sn: sn@14 { reg = <0x14 0x10>; @@ -220,7 +221,7 @@ }; reset: reset-controller@4404 { - compatible = "amlogic,meson-gx-reset", "amlogic,meson-gxbb-reset"; + compatible = "amlogic,meson-gxbb-reset"; reg = <0x0 0x04404 0x0 0x9c>; #reset-cells = <1>; }; @@ -240,7 +241,7 @@ }; i2c_A: i2c@8500 { - compatible = "amlogic,meson-gx-i2c", "amlogic,meson-gxbb-i2c"; + compatible = "amlogic,meson-gxbb-i2c"; reg = <0x0 0x08500 0x0 0x20>; interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>; #address-cells = <1>; @@ -290,7 +291,7 @@ }; i2c_B: i2c@87c0 { - compatible = "amlogic,meson-gx-i2c", "amlogic,meson-gxbb-i2c"; + compatible = "amlogic,meson-gxbb-i2c"; reg = <0x0 0x087c0 0x0 0x20>; interrupts = <GIC_SPI 214 IRQ_TYPE_EDGE_RISING>; #address-cells = <1>; @@ -299,7 +300,7 @@ }; i2c_C: i2c@87e0 { - compatible = "amlogic,meson-gx-i2c", "amlogic,meson-gxbb-i2c"; + compatible = "amlogic,meson-gxbb-i2c"; reg = <0x0 0x087e0 0x0 0x20>; interrupts = <GIC_SPI 215 IRQ_TYPE_EDGE_RISING>; #address-cells = <1>; @@ -317,7 +318,7 @@ }; spifc: spi@8c80 { - compatible = "amlogic,meson-gx-spifc", "amlogic,meson-gxbb-spifc"; + compatible = "amlogic,meson-gxbb-spifc"; reg = <0x0 0x08c80 0x0 0x80>; #address-cells = <1>; #size-cells = <0>; @@ -325,7 +326,7 @@ }; watchdog@98d0 { - compatible = "amlogic,meson-gx-wdt", "amlogic,meson-gxbb-wdt"; + compatible = "amlogic,meson-gxbb-wdt"; reg = <0x0 0x098d0 0x0 0x10>; clocks = <&xtal>; }; @@ -391,6 +392,7 @@ compatible = "amlogic,meson-gx-ao-cec"; reg = <0x0 0x00100 0x0 0x14>; interrupts = <GIC_SPI 199 IRQ_TYPE_EDGE_RISING>; + status = "disabled"; }; sec_AO: ao-secure@140 { @@ -414,7 +416,7 @@ }; i2c_AO: i2c@500 { - compatible = "amlogic,meson-gx-i2c", "amlogic,meson-gxbb-i2c"; + compatible = "amlogic,meson-gxbb-i2c"; reg = <0x0 0x500 0x0 0x20>; interrupts = <GIC_SPI 195 IRQ_TYPE_EDGE_RISING>; #address-cells = <1>; @@ -437,7 +439,21 @@ }; }; - periphs: periphs@c8834000 { + vdec: video-codec@c8820000 { + compatible = "amlogic,gx-vdec"; + reg = <0x0 0xc8820000 0x0 0x10000>, + <0x0 0xc110a580 0x0 0xe4>; + reg-names = "dos", "esparser"; + + interrupts = <GIC_SPI 44 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 32 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "vdec", "esparser"; + + amlogic,ao-sysctrl = <&sysctrl_AO>; + amlogic,canvas = <&canvas>; + }; + + periphs: bus@c8834000 { compatible = "simple-bus"; reg = <0x0 0xc8834000 0x0 0x2000>; #address-cells = <2>; @@ -476,7 +492,7 @@ }; mailbox: mailbox@404 { - compatible = "amlogic,meson-gx-mhu", "amlogic,meson-gxbb-mhu"; + compatible = "amlogic,meson-gxbb-mhu"; reg = <0 0x404 0 0x4c>; interrupts = <GIC_SPI 208 IRQ_TYPE_EDGE_RISING>, <GIC_SPI 209 IRQ_TYPE_EDGE_RISING>, @@ -489,10 +505,12 @@ compatible = "amlogic,meson-gxbb-dwmac", "snps,dwmac-3.70a", "snps,dwmac"; - reg = <0x0 0xc9410000 0x0 0x10000 - 0x0 0xc8834540 0x0 0x4>; + reg = <0x0 0xc9410000 0x0 0x10000>, + <0x0 0xc8834540 0x0 0x4>; interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "macirq"; + rx-fifo-depth = <4096>; + tx-fifo-depth = <2048>; status = "disabled"; }; @@ -528,9 +546,8 @@ vpu: vpu@d0100000 { compatible = "amlogic,meson-gx-vpu"; reg = <0x0 0xd0100000 0x0 0x100000>, - <0x0 0xc883c000 0x0 0x1000>, - <0x0 0xc8838000 0x0 0x1000>; - reg-names = "vpu", "hhi", "dmc"; + <0x0 0xc883c000 0x0 0x1000>; + reg-names = "vpu", "hhi"; interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts new file mode 100644 index 000000000000..2f1f829450a2 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts @@ -0,0 +1,78 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 Mohammad Rasim <mohammad.rasim96@gmail.com> + */ + +/dts-v1/; + +#include "meson-gxbb-p20x.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> +/ { + compatible = "videostrong,kii-pro", "amlogic,p201", "amlogic,s905", "amlogic,meson-gxbb"; + model = "Videostrong KII Pro"; + + leds { + compatible = "gpio-leds"; + status { + gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_LOW>; + default-state = "off"; + color = <LED_COLOR_ID_RED>; + function = LED_FUNCTION_STATUS; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + + button-reset { + label = "reset"; + linux,code = <KEY_POWER>; + gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_HIGH>; + }; + }; + +}; + + + +&uart_A { + status = "okay"; + pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; + pinctrl-names = "default"; + uart-has-rtscts; + + bluetooth { + compatible = "brcm,bcm4335a0"; + }; +}; + + + +ðmac { + status = "okay"; + pinctrl-0 = <ð_rmii_pins>; + pinctrl-names = "default"; + + phy-handle = <ð_phy0>; + phy-mode = "rmii"; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + eth_phy0: ethernet-phy@0 { + /* IC Plus IP101GR (0x02430c54) */ + reg = <0>; + reset-assert-us = <10000>; + reset-deassert-us = <10000>; + reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts index c34c1c90ccb6..d6ca684e0e61 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts @@ -10,6 +10,7 @@ / { compatible = "friendlyarm,nanopi-k2", "amlogic,meson-gxbb"; + model = "FriendlyARM NanoPi K2"; aliases { serial0 = &uart_AO; @@ -279,6 +280,9 @@ non-removable; disable-wp; + /* WiFi firmware requires power to be kept while in suspend */ + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; vmmc-supply = <&vddio_ao3v3>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts index b636912a2715..65ec7dea828c 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts @@ -75,8 +75,8 @@ gpios-states = <1>; /* Based on P200 schematics, signal CARD_1.8V/3.3V_CTR */ - states = <1800000 0 - 3300000 1>; + states = <1800000 0>, + <3300000 1>; }; vddio_boot: regulator-vddio_boot { @@ -220,6 +220,9 @@ non-removable; disable-wp; + /* WiFi firmware requires power to be kept while in suspend */ + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; vmmc-supply = <&vddao_3v3>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts index 9972b1515da6..6ded279c40c8 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts @@ -36,8 +36,15 @@ regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; + /* + * signal name from schematics: PWREN + */ gpio = <&gpio_ao GPIOAO_5 GPIO_ACTIVE_HIGH>; enable-active-high; + /* + * signal name from schematics: USB_POWER + */ + vin-supply = <&p5v0>; }; leds { @@ -50,18 +57,38 @@ }; }; + p5v0: regulator-p5v0 { + compatible = "regulator-fixed"; + + regulator-name = "P5V0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + hdmi_p5v0: regulator-hdmi_p5v0 { + compatible = "regulator-fixed"; + regulator-name = "HDMI_P5V0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + /* AP2331SA-7 */ + vin-supply = <&p5v0>; + }; + tflash_vdd: regulator-tflash_vdd { - /* - * signal name from schematics: TFLASH_VDD_EN - */ compatible = "regulator-fixed"; regulator-name = "TFLASH_VDD"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; + /* + * signal name from schematics: TFLASH_VDD_EN + */ gpio = <&gpio GPIOY_12 GPIO_ACTIVE_HIGH>; enable-active-high; + /* U16 RT9179GB */ + vin-supply = <&vddio_ao3v3>; }; tf_io: gpio-regulator-tf_io { @@ -77,8 +104,10 @@ gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_HIGH>; gpios-states = <0>; - states = <3300000 0 - 1800000 1>; + states = <3300000 0>, + <1800000 1>; + /* U12/U13 RT9179GB */ + vin-supply = <&vddio_ao3v3>; }; vcc1v8: regulator-vcc1v8 { @@ -86,6 +115,9 @@ regulator-name = "VCC1V8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + regulator-always-on; + /* U18 RT9179GB */ + vin-supply = <&vddio_ao3v3>; }; vcc3v3: regulator-vcc3v3 { @@ -95,6 +127,36 @@ regulator-max-microvolt = <3300000>; }; + vddio_ao1v8: regulator-vddio-ao1v8 { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_AO1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + /* U17 RT9179GB */ + vin-supply = <&p5v0>; + }; + + vddio_ao3v3: regulator-vddio-ao3v3 { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_AO3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + /* U11 MP2161GJ-C499 */ + vin-supply = <&p5v0>; + }; + + ddr3_1v5: regulator-ddr3_1v5 { + compatible = "regulator-fixed"; + regulator-name = "DDR3_1V5"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + /* U15 MP2161GJ-C499 */ + vin-supply = <&p5v0>; + }; + emmc_pwrseq: emmc-pwrseq { compatible = "mmc-pwrseq-emmc"; reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; @@ -167,6 +229,7 @@ status = "okay"; pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>; pinctrl-names = "default"; + hdmi-supply = <&hdmi_p5v0>; }; &hdmi_tx_tmds_port { @@ -296,7 +359,7 @@ }; &usb0_phy { - status = "okay"; + status = "disabled"; phy-supply = <&usb_otg_pwr>; }; @@ -306,7 +369,7 @@ }; &usb0 { - status = "okay"; + status = "disabled"; }; &usb1 { diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-p201.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-p201.dts index 56e0dd1ff55c..150a82f3b2d7 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-p201.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-p201.dts @@ -21,6 +21,6 @@ phy-mode = "rmii"; snps,reset-gpio = <&gpio GPIOZ_14 0>; - snps,reset-delays-us = <0 10000 1000000>; + snps,reset-delays-us = <0>, <10000>, <1000000>; snps,reset-active-low; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi index e8f925871edf..e803a466fe4e 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi @@ -46,8 +46,8 @@ gpios-states = <1>; /* Based on P200 schematics, signal CARD_1.8V/3.3V_CTR */ - states = <1800000 0 - 3300000 1>; + states = <1800000 0>, + <3300000 1>; regulator-settling-time-up-us = <10000>; regulator-settling-time-down-us = <150000>; @@ -170,6 +170,9 @@ non-removable; disable-wp; + /* WiFi firmware requires power to be kept while in suspend */ + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; vmmc-supply = <&vddao_3v3>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi index 43b11e3dfe11..5eab3dfdbd55 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi @@ -152,6 +152,7 @@ status = "okay"; pinctrl-0 = <&remote_input_ao_pins>; pinctrl-names = "default"; + linux,rc-map-name = "rc-vega-s9x"; }; &pwm_ef { @@ -183,6 +184,9 @@ non-removable; disable-wp; + /* WiFi firmware requires power to be kept while in suspend */ + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; vmmc-supply = <&vddao_3v3>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts index 2bfe69902552..83b985bb015e 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts @@ -12,3 +12,7 @@ compatible = "wetek,hub", "amlogic,meson-gxbb"; model = "WeTek Hub"; }; + +&ir { + linux,rc-map-name = "rc-wetek-hub"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts index 0038522315de..1d32d1f6d032 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts @@ -54,3 +54,7 @@ &usb1 { status = "okay"; }; + +&ir { + linux,rc-map-name = "rc-wetek-play2"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi index 4c539881fbb7..dee51cf95223 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi @@ -200,6 +200,9 @@ non-removable; disable-wp; + /* WiFi firmware requires power to be kept while in suspend */ + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; vmmc-supply = <&vddao_3v3>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi index f734faaf7b78..0cb40326b0d3 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi @@ -845,3 +845,14 @@ compatible = "amlogic,meson-gxbb-vpu", "amlogic,meson-gx-vpu"; power-domains = <&pwrc_vpu>; }; + +&vdec { + compatible = "amlogic,gxbb-vdec", "amlogic,gx-vdec"; + clocks = <&clkc CLKID_DOS_PARSER>, + <&clkc CLKID_DOS>, + <&clkc CLKID_VDEC_1>, + <&clkc CLKID_VDEC_HEVC>; + clock-names = "dos_parser", "dos", "vdec_1", "vdec_hevc"; + resets = <&reset RESET_PARSER>; + reset-names = "esparser"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-libretech-ac.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-libretech-ac.dts index 82b1c4851147..4d5949496596 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-libretech-ac.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-libretech-ac.dts @@ -14,7 +14,7 @@ / { compatible = "libretech,aml-s805x-ac", "amlogic,s805x", "amlogic,meson-gxl"; - model = "Libre Computer Board AML-S805X-AC"; + model = "Libre Computer AML-S805X-AC"; aliases { serial0 = &uart_AO; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts index 3a1484e5b8e1..a1119cfb0280 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts @@ -165,6 +165,9 @@ non-removable; disable-wp; + /* WiFi firmware requires power to be kept while in suspend */ + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; vmmc-supply = <&vddao_3v3>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-libretech-pc.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-libretech-pc.dts new file mode 100644 index 000000000000..100a1cfeea15 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-libretech-pc.dts @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2019 BayLibre SAS. All rights reserved. + * Author: Jerome Brunet <jbrunet@baylibre.com> + */ + +/dts-v1/; + +#include "meson-gxl-s905d.dtsi" +#include "meson-gx-libretech-pc.dtsi" + +/ { + compatible = "libretech,aml-s905d-pc", "amlogic,s905d", + "amlogic,meson-gxl"; + model = "Libre Computer AML-S905D-PC"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-tx3-mini.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-tx3-mini.dts index 789c819c99c4..dd729ac2300d 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-tx3-mini.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-tx3-mini.dts @@ -20,3 +20,7 @@ reg = <0x0 0x0 0x0 0x40000000>; /* 1 GiB or 2 GiB */ }; }; + +&ir { + linux,rc-map-name = "rc-tanix-tx3mini"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts index 796baea7a0bf..c8d74e61dec1 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts @@ -38,8 +38,8 @@ gpios-states = <1>; /* Based on P200 schematics, signal CARD_1.8V/3.3V_CTR */ - states = <1800000 0 - 3300000 1>; + states = <1800000 0>, + <3300000 1>; }; vddio_boot: regulator-vddio_boot { diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts index 5499e8de5c74..440bc23c7342 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts @@ -33,11 +33,9 @@ gpio-keys-polled { compatible = "gpio-keys-polled"; - #address-cells = <1>; - #size-cells = <0>; poll-interval = <100>; - button@0 { + power-button { label = "power"; linux,code = <KEY_POWER>; gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>; @@ -110,7 +108,7 @@ }; &ir { - linux,rc-map-name = "rc-geekbox"; + linux,rc-map-name = "rc-khadas"; }; &gpio_ao { @@ -192,6 +190,9 @@ bluetooth { compatible = "brcm,bcm43438-bt"; shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; + max-speed = <2000000>; + clocks = <&wifi32k>; + clock-names = "lpo"; }; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts index 4b8ce738e213..e8348b2728db 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts @@ -12,8 +12,9 @@ #include "meson-gxl-s905x.dtsi" / { - compatible = "libretech,cc", "amlogic,s905x", "amlogic,meson-gxl"; - model = "Libre Computer Board AML-S905X-CC"; + compatible = "libretech,aml-s905x-cc", "amlogic,s905x", + "amlogic,meson-gxl"; + model = "Libre Computer AML-S905X-CC"; aliases { serial0 = &uart_AO; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts index 26907ac82930..62dd87821ce5 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts @@ -38,8 +38,8 @@ gpios-states = <1>; /* Based on P200 schematics, signal CARD_1.8V/3.3V_CTR */ - states = <1800000 0 - 3300000 1>; + states = <1800000 0>, + <3300000 1>; }; vddio_boot: regulator-vddio_boot { @@ -165,6 +165,9 @@ non-removable; disable-wp; + /* WiFi firmware requires power to be kept while in suspend */ + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; vmmc-supply = <&vddao_3v3>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi index e3c16f50814b..43eb7d149e36 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi @@ -119,6 +119,9 @@ non-removable; disable-wp; + /* WiFi firmware requires power to be kept while in suspend */ + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; vmmc-supply = <&vddao_3v3>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi index c959456bacc6..259d86399390 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi @@ -36,6 +36,16 @@ phys = <&usb3_phy>, <&usb2_phy0>, <&usb2_phy1>; }; }; + + crypto: crypto@c883e000 { + compatible = "amlogic,gxl-crypto"; + reg = <0x0 0xc883e000 0x0 0x36>; + interrupts = <GIC_SPI 188 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 189 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc CLKID_BLKMV>; + clock-names = "blkmv"; + status = "okay"; + }; }; }; @@ -80,9 +90,6 @@ }; ðmac { - reg = <0x0 0xc9410000 0x0 0x10000 - 0x0 0xc8834540 0x0 0x4>; - clocks = <&clkc CLKID_ETH>, <&clkc CLKID_FCLK_DIV2>, <&clkc CLKID_MPLL2>; @@ -526,6 +533,15 @@ }; }; + i2c_c_dv18_pins: i2c_c_dv18 { + mux { + groups = "i2c_sck_c_dv19", + "i2c_sda_c_dv18"; + function = "i2c_c"; + bias-disable; + }; + }; + eth_pins: eth_c { mux { groups = "eth_mdio", @@ -712,7 +728,7 @@ #size-cells = <0>; internal_phy: ethernet-phy@8 { - compatible = "ethernet-phy-id0181.4400", "ethernet-phy-ieee802.3-c22"; + compatible = "ethernet-phy-id0181.4400"; interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; reg = <8>; max-speed = <100>; @@ -848,3 +864,14 @@ compatible = "amlogic,meson-gxl-vpu", "amlogic,meson-gx-vpu"; power-domains = <&pwrc_vpu>; }; + +&vdec { + compatible = "amlogic,gxl-vdec", "amlogic,gx-vdec"; + clocks = <&clkc CLKID_DOS_PARSER>, + <&clkc CLKID_DOS>, + <&clkc CLKID_VDEC_1>, + <&clkc CLKID_VDEC_HEVC>; + clock-names = "dos_parser", "dos", "vdec_1", "vdec_hevc"; + resets = <&reset RESET_PARSER>; + reset-names = "esparser"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts index 989d33ac6eae..f82f25c1a5f9 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts @@ -299,7 +299,7 @@ status = "okay"; pinctrl-0 = <&remote_input_ao_pins>; pinctrl-names = "default"; - linux,rc-map-name = "rc-geekbox"; + linux,rc-map-name = "rc-khadas"; }; &pwm_AO_ab { @@ -332,6 +332,9 @@ non-removable; disable-wp; + /* WiFi firmware requires power to be kept while in suspend */ + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; vmmc-supply = <&vddao_3v3>; @@ -409,6 +412,9 @@ bluetooth { compatible = "brcm,bcm43438-bt"; shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; + max-speed = <2000000>; + clocks = <&wifi32k>; + clock-names = "lpo"; }; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts index 5cd4d35006d0..420a88e9a195 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts @@ -148,6 +148,9 @@ non-removable; disable-wp; + /* WiFi firmware requires power to be kept while in suspend */ + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; vmmc-supply = <&vddao_3v3>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-s912-libretech-pc.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-s912-libretech-pc.dts new file mode 100644 index 000000000000..444c249863cb --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-s912-libretech-pc.dts @@ -0,0 +1,62 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2019 BayLibre SAS. All rights reserved. + * Author: Jerome Brunet <jbrunet@baylibre.com> + */ + +/dts-v1/; + +#include "meson-gxm.dtsi" +#include "meson-gx-libretech-pc.dtsi" + +/ { + compatible = "libretech,aml-s912-pc", "amlogic,s912", + "amlogic,meson-gxm"; + model = "Libre Computer AML-S912-PC"; + + typec2_vbus: regulator-typec2_vbus { + compatible = "regulator-fixed"; + regulator-name = "TYPEC2_VBUS"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v>; + + gpio = <&gpio GPIODV_1 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +&pinctrl_periphs { + /* + * Make sure the irq pin of the TYPE C controller is not driven + * by the SoC. + */ + fusb302_irq_pins: fusb302_irq { + mux { + groups = "GPIODV_0"; + function = "gpio_periphs"; + bias-pull-up; + output-disable; + }; + }; +}; + +&i2c_C { + fusb302@22 { + compatible = "fcs,fusb302"; + reg = <0x22>; + + pinctrl-0 = <&fusb302_irq_pins>; + pinctrl-names = "default"; + interrupt-parent = <&gpio_intc>; + interrupts = <59 IRQ_TYPE_LEVEL_LOW>; + + vbus-supply = <&typec2_vbus>; + + status = "okay"; + }; +}; + +&usb2_phy2 { + phy-supply = <&typec2_vbus>; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-vega-s96.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-vega-s96.dts index e2ea6753263b..0bdf51d041ae 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm-vega-s96.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-vega-s96.dts @@ -35,3 +35,7 @@ reg = <0>; }; }; + +&ir { + linux,rc-map-name = "rc-vega-s9x"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi index 7a85a82bf65d..5ff64a0d2dcf 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi @@ -96,10 +96,10 @@ compatible = "amlogic,meson-gxm-mali", "arm,mali-t820"; reg = <0x0 0xc0000 0x0 0x40000>; interrupt-parent = <&gic>; - interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>, + interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "gpu", "mmu", "job"; + <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "job", "mmu", "gpu"; clocks = <&clkc CLKID_MALI>; resets = <&reset RESET_MALI_CAPB3>, <&reset RESET_MALI>; @@ -144,3 +144,7 @@ &dwc3 { phys = <&usb3_phy>, <&usb2_phy0>, <&usb2_phy1>, <&usb2_phy2>; }; + +&vdec { + compatible = "amlogic,gxm-vdec", "amlogic,gx-vdec"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi new file mode 100644 index 000000000000..90815fa25ec6 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi @@ -0,0 +1,367 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 BayLibre, SAS + * Author: Neil Armstrong <narmstrong@baylibre.com> + * Copyright (c) 2019 Christian Hewitt <christianshewitt@gmail.com> + */ + +#include <dt-bindings/input/input.h> +#include <dt-bindings/gpio/meson-g12a-gpio.h> + +/ { + model = "Khadas VIM3"; + + aliases { + serial0 = &uart_AO; + ethernet0 = ðmac; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; + }; + + adc-keys { + compatible = "adc-keys"; + io-channels = <&saradc 2>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1710000>; + + button-function { + label = "Function"; + linux,code = <KEY_FN>; + press-threshold-microvolt = <10000>; + }; + }; + + leds { + compatible = "gpio-leds"; + + white { + label = "vim3:white:sys"; + gpios = <&gpio_ao GPIOAO_4 GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + }; + + red { + label = "vim3:red"; + gpios = <&gpio_expander 5 GPIO_ACTIVE_LOW>; + }; + }; + + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + poll-interval = <100>; + + power-button { + label = "power"; + linux,code = <KEY_POWER>; + gpios = <&gpio_ao GPIOAO_7 GPIO_ACTIVE_LOW>; + }; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>; + clocks = <&wifi32k>; + clock-names = "ext_clock"; + }; + + dc_in: regulator-dc_in { + compatible = "regulator-fixed"; + regulator-name = "DC_IN"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + vcc_5v: regulator-vcc_5v { + compatible = "regulator-fixed"; + regulator-name = "VCC_5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&dc_in>; + + gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>; + enable-active-high; + }; + + vcc_1v8: regulator-vcc_1v8 { + compatible = "regulator-fixed"; + regulator-name = "VCC_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_3v3>; + regulator-always-on; + }; + + vcc_3v3: regulator-vcc_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VCC_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vsys_3v3>; + regulator-always-on; + /* FIXME: actually controlled by VDDCPU_B_EN */ + }; + + vddao_1v8: regulator-vddao_1v8 { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_AO1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vsys_3v3>; + regulator-always-on; + }; + + emmc_1v8: regulator-emmc_1v8 { + compatible = "regulator-fixed"; + regulator-name = "EMMC_AO1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_3v3>; + regulator-always-on; + }; + + vsys_3v3: regulator-vsys_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VSYS_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&dc_in>; + regulator-always-on; + }; + + usb_pwr: regulator-usb_pwr { + compatible = "regulator-fixed"; + regulator-name = "USB_PWR"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc_5v>; + + gpio = <&gpio GPIOA_6 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_tx_tmds_out>; + }; + }; + }; + + wifi32k: wifi32k { + compatible = "pwm-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */ + }; +}; + +&cec_AO { + pinctrl-0 = <&cec_ao_a_h_pins>; + pinctrl-names = "default"; + status = "disabled"; + hdmi-phandle = <&hdmi_tx>; +}; + +&cecb_AO { + pinctrl-0 = <&cec_ao_b_h_pins>; + pinctrl-names = "default"; + status = "okay"; + hdmi-phandle = <&hdmi_tx>; +}; + +&ext_mdio { + external_phy: ethernet-phy@0 { + /* Realtek RTL8211F (0x001cc916) */ + reg = <0>; + max-speed = <1000>; + + interrupt-parent = <&gpio_intc>; + /* MAC_INTR on GPIOZ_14 */ + interrupts = <26 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +ðmac { + pinctrl-0 = <ð_pins>, <ð_rgmii_pins>; + pinctrl-names = "default"; + status = "okay"; + phy-mode = "rgmii"; + phy-handle = <&external_phy>; + amlogic,tx-delay-ns = <2>; +}; + +&hdmi_tx { + status = "okay"; + pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>; + pinctrl-names = "default"; + hdmi-supply = <&vcc_5v>; +}; + +&hdmi_tx_tmds_port { + hdmi_tx_tmds_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; +}; + +&i2c_AO { + status = "okay"; + pinctrl-0 = <&i2c_ao_sck_pins>, <&i2c_ao_sda_pins>; + pinctrl-names = "default"; + + gpio_expander: gpio-controller@20 { + compatible = "ti,tca6408"; + reg = <0x20>; + vcc-supply = <&vcc_3v3>; + gpio-controller; + #gpio-cells = <2>; + }; + + rtc@51 { + compatible = "haoyu,hym8563"; + reg = <0x51>; + #clock-cells = <0>; + }; +}; + +&ir { + status = "okay"; + pinctrl-0 = <&remote_input_ao_pins>; + pinctrl-names = "default"; + linux,rc-map-name = "rc-khadas"; +}; + +&pcie { + reset-gpios = <&gpio GPIOA_8 GPIO_ACTIVE_LOW>; +}; + +&pwm_ef { + status = "okay"; + pinctrl-0 = <&pwm_e_pins>; + pinctrl-names = "default"; +}; + +&saradc { + status = "okay"; + vref-supply = <&vddao_1v8>; +}; + +/* SDIO */ +&sd_emmc_a { + status = "okay"; + pinctrl-0 = <&sdio_pins>; + pinctrl-1 = <&sdio_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + #address-cells = <1>; + #size-cells = <0>; + + bus-width = <4>; + cap-sd-highspeed; + sd-uhs-sdr50; + max-frequency = <100000000>; + + non-removable; + disable-wp; + + /* WiFi firmware requires power to be kept while in suspend */ + keep-power-in-suspend; + + mmc-pwrseq = <&sdio_pwrseq>; + + vmmc-supply = <&vsys_3v3>; + vqmmc-supply = <&vddao_1v8>; + + brcmf: wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + }; +}; + +/* SD card */ +&sd_emmc_b { + status = "okay"; + pinctrl-0 = <&sdcard_c_pins>; + pinctrl-1 = <&sdcard_clk_gate_c_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <4>; + cap-sd-highspeed; + max-frequency = <50000000>; + disable-wp; + + cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>; + vmmc-supply = <&vsys_3v3>; + vqmmc-supply = <&vsys_3v3>; +}; + +/* eMMC */ +&sd_emmc_c { + status = "okay"; + pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>; + pinctrl-1 = <&emmc_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <8>; + cap-mmc-highspeed; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + max-frequency = <200000000>; + disable-wp; + + mmc-pwrseq = <&emmc_pwrseq>; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&emmc_1v8>; +}; + +&uart_A { + status = "okay"; + pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; + pinctrl-names = "default"; + uart-has-rtscts; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; + max-speed = <2000000>; + clocks = <&wifi32k>; + clock-names = "lpo"; + }; +}; + +&uart_AO { + status = "okay"; + pinctrl-0 = <&uart_ao_a_pins>; + pinctrl-names = "default"; +}; + +&usb2_phy0 { + phy-supply = <&dc_in>; +}; + +&usb2_phy1 { + phy-supply = <&usb_pwr>; +}; + +&usb3_pcie_phy { + phy-supply = <&usb_pwr>; +}; + +&usb { + status = "okay"; + dr_mode = "peripheral"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts new file mode 100644 index 000000000000..dbbf29a0dbf6 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts @@ -0,0 +1,95 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 BayLibre, SAS + * Author: Neil Armstrong <narmstrong@baylibre.com> + */ + +/dts-v1/; + +#include "meson-sm1.dtsi" +#include "meson-khadas-vim3.dtsi" + +/ { + compatible = "khadas,vim3l", "amlogic,sm1"; + model = "Khadas VIM3L"; + + vddcpu: regulator-vddcpu { + /* + * Silergy SY8030DEC Regulator. + */ + compatible = "pwm-regulator"; + + regulator-name = "VDDCPU"; + regulator-min-microvolt = <690000>; + regulator-max-microvolt = <1050000>; + + vin-supply = <&vsys_3v3>; + + pwms = <&pwm_AO_cd 1 1250 0>; + pwm-dutycycle-range = <100 0>; + + regulator-boot-on; + regulator-always-on; + }; +}; + +&cpu0 { + cpu-supply = <&vddcpu>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPU_CLK>; + clock-latency = <50000>; +}; + +&cpu1 { + cpu-supply = <&vddcpu>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPU1_CLK>; + clock-latency = <50000>; +}; + +&cpu2 { + cpu-supply = <&vddcpu>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPU2_CLK>; + clock-latency = <50000>; +}; + +&cpu3 { + cpu-supply = <&vddcpu>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPU3_CLK>; + clock-latency = <50000>; +}; + +&pwm_AO_cd { + pinctrl-0 = <&pwm_ao_d_e_pins>; + pinctrl-names = "default"; + clocks = <&xtal>; + clock-names = "clkin1"; + status = "okay"; +}; + +/* + * The VIM3 on-board MCU can mux the PCIe/USB3.0 shared differential + * lines using a FUSB340TMX USB 3.1 SuperSpeed Data Switch between + * an USB3.0 Type A connector and a M.2 Key M slot. + * The PHY driving these differential lines is shared between + * the USB3.0 controller and the PCIe Controller, thus only + * a single controller can use it. + * If the MCU is configured to mux the PCIe/USB3.0 differential lines + * to the M.2 Key M slot, uncomment the following block to disable + * USB3.0 from the USB Complex and enable the PCIe controller. + * The End User is not expected to uncomment the following except for + * testing purposes, but instead rely on the firmware/bootloader to + * update these nodes accordingly if PCIe mode is selected by the MCU. + */ +/* +&pcie { + status = "okay"; +}; + +&usb { + phys = <&usb2_phy0>, <&usb2_phy1>; + phy-names = "usb2-phy0", "usb2-phy1"; +}; + */ diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts new file mode 100644 index 000000000000..a8bb3fa9fec9 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts @@ -0,0 +1,615 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 BayLibre SAS. All rights reserved. + */ + +/dts-v1/; + +#include "meson-sm1.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/gpio/meson-g12a-gpio.h> +#include <dt-bindings/sound/meson-g12a-tohdmitx.h> + +/ { + compatible = "seirobotics,sei610", "amlogic,sm1"; + model = "SEI Robotics SEI610"; + + aliases { + serial0 = &uart_AO; + ethernet0 = ðmac; + }; + + mono_dac: audio-codec-0 { + compatible = "maxim,max98357a"; + #sound-dai-cells = <0>; + sound-name-prefix = "U16"; + sdmode-gpios = <&gpio GPIOX_8 GPIO_ACTIVE_HIGH>; + }; + + dmics: audio-codec-1 { + #sound-dai-cells = <0>; + compatible = "dmic-codec"; + num-channels = <2>; + wakeup-delay-ms = <50>; + status = "okay"; + sound-name-prefix = "MIC"; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>; + }; + + gpio-keys { + compatible = "gpio-keys"; + + key1 { + label = "A"; + linux,code = <BTN_0>; + gpios = <&gpio GPIOH_6 GPIO_ACTIVE_LOW>; + interrupt-parent = <&gpio_intc>; + interrupts = <34 IRQ_TYPE_EDGE_BOTH>; + }; + + key2 { + label = "B"; + linux,code = <BTN_1>; + gpios = <&gpio GPIOH_7 GPIO_ACTIVE_LOW>; + interrupt-parent = <&gpio_intc>; + interrupts = <35 IRQ_TYPE_EDGE_BOTH>; + }; + + key3 { + label = "C"; + linux,code = <BTN_2>; + gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>; + interrupt-parent = <&gpio_intc>; + interrupts = <2 IRQ_TYPE_EDGE_BOTH>; + }; + + mic_mute { + label = "MicMute"; + linux,code = <SW_MUTE_DEVICE>; + linux,input-type = <EV_SW>; + gpios = <&gpio_ao GPIOE_2 GPIO_ACTIVE_LOW>; + interrupt-parent = <&gpio_intc>; + interrupts = <99 IRQ_TYPE_EDGE_BOTH>; + }; + + power_key { + label = "PowerKey"; + linux,code = <KEY_POWER>; + gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_LOW>; + interrupt-parent = <&gpio_intc>; + interrupts = <3 IRQ_TYPE_EDGE_BOTH>; + }; + }; + + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_tx_tmds_out>; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + + bluetooth { + label = "sei610:blue:bt"; + gpios = <&gpio GPIOC_7 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>; + default-state = "off"; + }; + }; + + pwmleds { + compatible = "pwm-leds"; + + power { + label = "sei610:red:power"; + pwms = <&pwm_AO_ab 0 30518 0>; + max-brightness = <255>; + linux,default-trigger = "default-on"; + active-low; + }; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x40000000>; + }; + + ao_5v: regulator-ao_5v { + compatible = "regulator-fixed"; + regulator-name = "AO_5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&dc_in>; + regulator-always-on; + }; + + dc_in: regulator-dc_in { + compatible = "regulator-fixed"; + regulator-name = "DC_IN"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + emmc_1v8: regulator-emmc_1v8 { + compatible = "regulator-fixed"; + regulator-name = "EMMC_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vddao_3v3>; + regulator-always-on; + }; + + vddao_3v3: regulator-vddao_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&dc_in>; + regulator-always-on; + }; + + /* Used by Tuner, RGB Led & IR Emitter LED array */ + vddao_3v3_t: regulator-vddao_3v3_t { + compatible = "regulator-fixed"; + regulator-name = "VDDAO_3V3_T"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vddao_3v3>; + gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>; + enable-active-low; + regulator-always-on; + }; + + vddcpu: regulator-vddcpu { + /* + * SY8120B1ABC DC/DC Regulator. + */ + compatible = "pwm-regulator"; + + regulator-name = "VDDCPU"; + regulator-min-microvolt = <690000>; + regulator-max-microvolt = <1050000>; + + vin-supply = <&dc_in>; + + pwms = <&pwm_AO_cd 1 1500 0>; + pwm-dutycycle-range = <100 0>; + + regulator-boot-on; + regulator-always-on; + }; + + vddio_ao1v8: regulator-vddio_ao1v8 { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_AO1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vddao_3v3>; + regulator-always-on; + }; + + reserved-memory { + /* TEE Reserved Memory */ + bl32_reserved: bl32@5000000 { + reg = <0x0 0x05300000 0x0 0x2000000>; + no-map; + }; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>; + clocks = <&wifi32k>; + clock-names = "ext_clock"; + }; + + sound { + compatible = "amlogic,axg-sound-card"; + model = "SM1-SEI610"; + audio-aux-devs = <&tdmout_a>, <&tdmout_b>, + <&tdmin_a>, <&tdmin_b>; + audio-routing = "TDMOUT_A IN 0", "FRDDR_A OUT 0", + "TDMOUT_A IN 1", "FRDDR_B OUT 0", + "TDMOUT_A IN 2", "FRDDR_C OUT 0", + "TDM_A Playback", "TDMOUT_A OUT", + "TDMOUT_B IN 0", "FRDDR_A OUT 1", + "TDMOUT_B IN 1", "FRDDR_B OUT 1", + "TDMOUT_B IN 2", "FRDDR_C OUT 1", + "TDM_B Playback", "TDMOUT_B OUT", + "TODDR_A IN 4", "PDM Capture", + "TODDR_B IN 4", "PDM Capture", + "TODDR_C IN 4", "PDM Capture", + "TDMIN_A IN 0", "TDM_A Capture", + "TDMIN_A IN 3", "TDM_A Loopback", + "TDMIN_B IN 0", "TDM_A Capture", + "TDMIN_B IN 3", "TDM_A Loopback", + "TDMIN_A IN 1", "TDM_B Capture", + "TDMIN_A IN 4", "TDM_B Loopback", + "TDMIN_B IN 1", "TDM_B Capture", + "TDMIN_B IN 4", "TDM_B Loopback", + "TODDR_A IN 0", "TDMIN_A OUT", + "TODDR_B IN 0", "TDMIN_A OUT", + "TODDR_C IN 0", "TDMIN_A OUT", + "TODDR_A IN 1", "TDMIN_B OUT", + "TODDR_B IN 1", "TDMIN_B OUT", + "TODDR_C IN 1", "TDMIN_B OUT"; + + assigned-clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + assigned-clock-parents = <0>, <0>, <0>; + assigned-clock-rates = <294912000>, + <270950400>, + <393216000>; + status = "okay"; + + dai-link-0 { + sound-dai = <&frddr_a>; + }; + + dai-link-1 { + sound-dai = <&frddr_b>; + }; + + dai-link-2 { + sound-dai = <&frddr_c>; + }; + + dai-link-3 { + sound-dai = <&toddr_a>; + }; + + dai-link-4 { + sound-dai = <&toddr_b>; + }; + + dai-link-5 { + sound-dai = <&toddr_c>; + }; + + /* internal speaker interface */ + dai-link-6 { + sound-dai = <&tdmif_a>; + dai-format = "i2s"; + dai-tdm-slot-tx-mask-0 = <1 1>; + mclk-fs = <256>; + + codec-0 { + sound-dai = <&mono_dac>; + }; + + codec-1 { + sound-dai = <&tohdmitx TOHDMITX_I2S_IN_A>; + }; + }; + + /* 8ch hdmi interface */ + dai-link-7 { + sound-dai = <&tdmif_b>; + dai-format = "i2s"; + dai-tdm-slot-tx-mask-0 = <1 1>; + dai-tdm-slot-tx-mask-1 = <1 1>; + dai-tdm-slot-tx-mask-2 = <1 1>; + dai-tdm-slot-tx-mask-3 = <1 1>; + mclk-fs = <256>; + + codec { + sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>; + }; + }; + + /* internal digital mics */ + dai-link-8 { + sound-dai = <&pdm>; + + codec { + sound-dai = <&dmics>; + }; + }; + + /* hdmi glue */ + dai-link-9 { + sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>; + + codec { + sound-dai = <&hdmi_tx>; + }; + }; + }; + + wifi32k: wifi32k { + compatible = "pwm-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */ + }; +}; + +&arb { + status = "okay"; +}; + +&cec_AO { + pinctrl-0 = <&cec_ao_a_h_pins>; + pinctrl-names = "default"; + status = "disabled"; + hdmi-phandle = <&hdmi_tx>; +}; + +&cecb_AO { + pinctrl-0 = <&cec_ao_b_h_pins>; + pinctrl-names = "default"; + status = "okay"; + hdmi-phandle = <&hdmi_tx>; +}; + +&clkc_audio { + status = "okay"; +}; + +&cpu0 { + cpu-supply = <&vddcpu>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPU_CLK>; + clock-latency = <50000>; +}; + +&cpu1 { + cpu-supply = <&vddcpu>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPU1_CLK>; + clock-latency = <50000>; +}; + +&cpu2 { + cpu-supply = <&vddcpu>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPU2_CLK>; + clock-latency = <50000>; +}; + +&cpu3 { + cpu-supply = <&vddcpu>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPU3_CLK>; + clock-latency = <50000>; +}; + +ðmac { + status = "okay"; + phy-handle = <&internal_ephy>; + phy-mode = "rmii"; +}; + +&frddr_a { + status = "okay"; +}; + +&frddr_b { + status = "okay"; +}; + +&frddr_c { + status = "okay"; +}; + +&hdmi_tx { + status = "okay"; + pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>; + pinctrl-names = "default"; +}; + +&hdmi_tx_tmds_port { + hdmi_tx_tmds_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; +}; + +&i2c3 { + status = "okay"; + pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>; + pinctrl-names = "default"; +}; + +&ir { + status = "okay"; + pinctrl-0 = <&remote_input_ao_pins>; + pinctrl-names = "default"; +}; + +&pdm { + pinctrl-0 = <&pdm_din0_z_pins>, <&pdm_dclk_z_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&pwm_AO_ab { + status = "okay"; + pinctrl-0 = <&pwm_ao_a_pins>; + pinctrl-names = "default"; + clocks = <&xtal>; + clock-names = "clkin0"; +}; + +&pwm_AO_cd { + pinctrl-0 = <&pwm_ao_d_e_pins>; + pinctrl-names = "default"; + clocks = <&xtal>; + clock-names = "clkin1"; + status = "okay"; +}; + +&pwm_ef { + status = "okay"; + pinctrl-0 = <&pwm_e_pins>; + pinctrl-names = "default"; + clocks = <&xtal>; + clock-names = "clkin0"; +}; + +&saradc { + status = "okay"; + vref-supply = <&vddio_ao1v8>; +}; + +/* SDIO */ +&sd_emmc_a { + status = "okay"; + pinctrl-0 = <&sdio_pins>; + pinctrl-1 = <&sdio_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + #address-cells = <1>; + #size-cells = <0>; + + bus-width = <4>; + cap-sd-highspeed; + sd-uhs-sdr50; + max-frequency = <100000000>; + + non-removable; + disable-wp; + + /* WiFi firmware requires power to be kept while in suspend */ + keep-power-in-suspend; + + mmc-pwrseq = <&sdio_pwrseq>; + + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&vddio_ao1v8>; + + brcmf: wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + }; +}; + +/* SD card */ +&sd_emmc_b { + status = "okay"; + pinctrl-0 = <&sdcard_c_pins>; + pinctrl-1 = <&sdcard_clk_gate_c_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <4>; + cap-sd-highspeed; + max-frequency = <50000000>; + disable-wp; + + cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>; + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&vddao_3v3>; +}; + +/* eMMC */ +&sd_emmc_c { + status = "okay"; + pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>; + pinctrl-1 = <&emmc_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <8>; + cap-mmc-highspeed; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + max-frequency = <200000000>; + non-removable; + disable-wp; + + mmc-pwrseq = <&emmc_pwrseq>; + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&emmc_1v8>; +}; + +&tdmif_a { + pinctrl-0 = <&tdm_a_dout0_pins>, <&tdm_a_fs_pins>, <&tdm_a_sclk_pins>; + pinctrl-names = "default"; + status = "okay"; + + assigned-clocks = <&clkc_audio AUD_CLKID_TDM_SCLK_PAD0>, + <&clkc_audio AUD_CLKID_TDM_LRCLK_PAD0>; + assigned-clock-parents = <&clkc_audio AUD_CLKID_MST_A_SCLK>, + <&clkc_audio AUD_CLKID_MST_A_LRCLK>; + assigned-clock-rates = <0>, <0>; +}; + +&tdmif_b { + status = "okay"; +}; + +&tdmin_a { + status = "okay"; +}; + +&tdmin_b { + status = "okay"; +}; + +&tdmout_a { + status = "okay"; +}; + +&tdmout_b { + status = "okay"; +}; + +&toddr_a { + status = "okay"; +}; + +&toddr_b { + status = "okay"; +}; + +&toddr_c { + status = "okay"; +}; + +&tohdmitx { + status = "okay"; +}; + +&uart_A { + status = "okay"; + pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; + pinctrl-names = "default"; + uart-has-rtscts; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + interrupt-parent = <&gpio_intc>; + interrupts = <95 IRQ_TYPE_LEVEL_HIGH>; + shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; + max-speed = <2000000>; + clocks = <&wifi32k>; + clock-names = "lpo"; + vbat-supply = <&vddao_3v3>; + vddio-supply = <&vddio_ao1v8>; + }; +}; + +/* Exposed via the on-board USB to Serial FT232RL IC */ +&uart_AO { + status = "okay"; + pinctrl-0 = <&uart_ao_a_pins>; + pinctrl-names = "default"; +}; + +&usb { + status = "okay"; + dr_mode = "otg"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi new file mode 100644 index 000000000000..d847a3fcbc85 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi @@ -0,0 +1,503 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 BayLibre, SAS + * Author: Neil Armstrong <narmstrong@baylibre.com> + */ + +#include "meson-g12-common.dtsi" +#include <dt-bindings/clock/axg-audio-clkc.h> +#include <dt-bindings/power/meson-sm1-power.h> +#include <dt-bindings/reset/amlogic,meson-axg-audio-arb.h> +#include <dt-bindings/reset/amlogic,meson-g12a-audio-reset.h> + +/ { + compatible = "amlogic,sm1"; + + tdmif_a: audio-controller-0 { + compatible = "amlogic,axg-tdm-iface"; + #sound-dai-cells = <0>; + sound-name-prefix = "TDM_A"; + clocks = <&clkc_audio AUD_CLKID_MST_A_MCLK>, + <&clkc_audio AUD_CLKID_MST_A_SCLK>, + <&clkc_audio AUD_CLKID_MST_A_LRCLK>; + clock-names = "mclk", "sclk", "lrclk"; + status = "disabled"; + }; + + tdmif_b: audio-controller-1 { + compatible = "amlogic,axg-tdm-iface"; + #sound-dai-cells = <0>; + sound-name-prefix = "TDM_B"; + clocks = <&clkc_audio AUD_CLKID_MST_B_MCLK>, + <&clkc_audio AUD_CLKID_MST_B_SCLK>, + <&clkc_audio AUD_CLKID_MST_B_LRCLK>; + clock-names = "mclk", "sclk", "lrclk"; + status = "disabled"; + }; + + tdmif_c: audio-controller-2 { + compatible = "amlogic,axg-tdm-iface"; + #sound-dai-cells = <0>; + sound-name-prefix = "TDM_C"; + clocks = <&clkc_audio AUD_CLKID_MST_C_MCLK>, + <&clkc_audio AUD_CLKID_MST_C_SCLK>, + <&clkc_audio AUD_CLKID_MST_C_LRCLK>; + clock-names = "mclk", "sclk", "lrclk"; + status = "disabled"; + }; + + cpus { + #address-cells = <0x2>; + #size-cells = <0x0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x0 0x0>; + enable-method = "psci"; + next-level-cache = <&l2>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x0 0x1>; + enable-method = "psci"; + next-level-cache = <&l2>; + }; + + cpu2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x0 0x2>; + enable-method = "psci"; + next-level-cache = <&l2>; + }; + + cpu3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x0 0x3>; + enable-method = "psci"; + next-level-cache = <&l2>; + }; + + l2: l2-cache0 { + compatible = "cache"; + }; + }; + + cpu_opp_table: opp-table { + compatible = "operating-points-v2"; + opp-shared; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + opp-microvolt = <730000>; + }; + + opp-250000000 { + opp-hz = /bits/ 64 <250000000>; + opp-microvolt = <730000>; + }; + + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + opp-microvolt = <730000>; + }; + + opp-667000000 { + opp-hz = /bits/ 64 <666666666>; + opp-microvolt = <750000>; + }; + + opp-1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <770000>; + }; + + opp-1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <780000>; + }; + + opp-1404000000 { + opp-hz = /bits/ 64 <1404000000>; + opp-microvolt = <790000>; + }; + + opp-1512000000 { + opp-hz = /bits/ 64 <1500000000>; + opp-microvolt = <800000>; + }; + + opp-1608000000 { + opp-hz = /bits/ 64 <1608000000>; + opp-microvolt = <810000>; + }; + + opp-1704000000 { + opp-hz = /bits/ 64 <1704000000>; + opp-microvolt = <850000>; + }; + + opp-1800000000 { + opp-hz = /bits/ 64 <1800000000>; + opp-microvolt = <900000>; + }; + + opp-1908000000 { + opp-hz = /bits/ 64 <1908000000>; + opp-microvolt = <950000>; + }; + }; +}; + +&apb { + audio: bus@60000 { + compatible = "simple-bus"; + reg = <0x0 0x60000 0x0 0x1000>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0x60000 0x0 0x1000>; + + clkc_audio: clock-controller@0 { + status = "disabled"; + compatible = "amlogic,sm1-audio-clkc"; + reg = <0x0 0x0 0x0 0xb4>; + #clock-cells = <1>; + #reset-cells = <1>; + + clocks = <&clkc CLKID_AUDIO>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>, + <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL3>, + <&clkc CLKID_HIFI_PLL>, + <&clkc CLKID_FCLK_DIV3>, + <&clkc CLKID_FCLK_DIV4>, + <&clkc CLKID_FCLK_DIV5>; + clock-names = "pclk", + "mst_in0", + "mst_in1", + "mst_in2", + "mst_in3", + "mst_in4", + "mst_in5", + "mst_in6", + "mst_in7"; + + resets = <&reset RESET_AUDIO>; + }; + + toddr_a: audio-controller@100 { + compatible = "amlogic,sm1-toddr", + "amlogic,axg-toddr"; + reg = <0x0 0x100 0x0 0x2c>; + #sound-dai-cells = <0>; + sound-name-prefix = "TODDR_A"; + interrupts = <GIC_SPI 148 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_audio AUD_CLKID_TODDR_A>; + resets = <&arb AXG_ARB_TODDR_A>, + <&clkc_audio AUD_RESET_TODDR_A>; + reset-names = "arb", "rst"; + amlogic,fifo-depth = <8192>; + status = "disabled"; + }; + + toddr_b: audio-controller@140 { + compatible = "amlogic,sm1-toddr", + "amlogic,axg-toddr"; + reg = <0x0 0x140 0x0 0x2c>; + #sound-dai-cells = <0>; + sound-name-prefix = "TODDR_B"; + interrupts = <GIC_SPI 149 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_audio AUD_CLKID_TODDR_B>; + resets = <&arb AXG_ARB_TODDR_B>, + <&clkc_audio AUD_RESET_TODDR_B>; + reset-names = "arb", "rst"; + amlogic,fifo-depth = <256>; + status = "disabled"; + }; + + toddr_c: audio-controller@180 { + compatible = "amlogic,sm1-toddr", + "amlogic,axg-toddr"; + reg = <0x0 0x180 0x0 0x2c>; + #sound-dai-cells = <0>; + sound-name-prefix = "TODDR_C"; + interrupts = <GIC_SPI 150 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_audio AUD_CLKID_TODDR_C>; + resets = <&arb AXG_ARB_TODDR_C>, + <&clkc_audio AUD_RESET_TODDR_C>; + reset-names = "arb", "rst"; + amlogic,fifo-depth = <256>; + status = "disabled"; + }; + + frddr_a: audio-controller@1c0 { + compatible = "amlogic,sm1-frddr", + "amlogic,axg-frddr"; + reg = <0x0 0x1c0 0x0 0x2c>; + #sound-dai-cells = <0>; + sound-name-prefix = "FRDDR_A"; + interrupts = <GIC_SPI 152 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_audio AUD_CLKID_FRDDR_A>; + resets = <&arb AXG_ARB_FRDDR_A>, + <&clkc_audio AUD_RESET_FRDDR_A>; + reset-names = "arb", "rst"; + amlogic,fifo-depth = <512>; + status = "disabled"; + }; + + frddr_b: audio-controller@200 { + compatible = "amlogic,sm1-frddr", + "amlogic,axg-frddr"; + reg = <0x0 0x200 0x0 0x2c>; + #sound-dai-cells = <0>; + sound-name-prefix = "FRDDR_B"; + interrupts = <GIC_SPI 153 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_audio AUD_CLKID_FRDDR_B>; + resets = <&arb AXG_ARB_FRDDR_B>, + <&clkc_audio AUD_RESET_FRDDR_B>; + reset-names = "arb", "rst"; + amlogic,fifo-depth = <256>; + status = "disabled"; + }; + + frddr_c: audio-controller@240 { + compatible = "amlogic,sm1-frddr", + "amlogic,axg-frddr"; + reg = <0x0 0x240 0x0 0x2c>; + #sound-dai-cells = <0>; + sound-name-prefix = "FRDDR_C"; + interrupts = <GIC_SPI 154 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_audio AUD_CLKID_FRDDR_C>; + resets = <&arb AXG_ARB_FRDDR_C>, + <&clkc_audio AUD_RESET_FRDDR_C>; + reset-names = "arb", "rst"; + amlogic,fifo-depth = <256>; + status = "disabled"; + }; + + arb: reset-controller@280 { + status = "disabled"; + compatible = "amlogic,meson-sm1-audio-arb"; + reg = <0x0 0x280 0x0 0x4>; + #reset-cells = <1>; + clocks = <&clkc_audio AUD_CLKID_DDR_ARB>; + }; + + tdmin_a: audio-controller@300 { + compatible = "amlogic,sm1-tdmin", + "amlogic,axg-tdmin"; + reg = <0x0 0x300 0x0 0x40>; + sound-name-prefix = "TDMIN_A"; + resets = <&clkc_audio AUD_RESET_TDMIN_A>; + clocks = <&clkc_audio AUD_CLKID_TDMIN_A>, + <&clkc_audio AUD_CLKID_TDMIN_A_SCLK>, + <&clkc_audio AUD_CLKID_TDMIN_A_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMIN_A_LRCLK>, + <&clkc_audio AUD_CLKID_TDMIN_A_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; + status = "disabled"; + }; + + tdmin_b: audio-controller@340 { + compatible = "amlogic,sm1-tdmin", + "amlogic,axg-tdmin"; + reg = <0x0 0x340 0x0 0x40>; + sound-name-prefix = "TDMIN_B"; + resets = <&clkc_audio AUD_RESET_TDMIN_B>; + clocks = <&clkc_audio AUD_CLKID_TDMIN_B>, + <&clkc_audio AUD_CLKID_TDMIN_B_SCLK>, + <&clkc_audio AUD_CLKID_TDMIN_B_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMIN_B_LRCLK>, + <&clkc_audio AUD_CLKID_TDMIN_B_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; + status = "disabled"; + }; + + tdmin_c: audio-controller@380 { + compatible = "amlogic,sm1-tdmin", + "amlogic,axg-tdmin"; + reg = <0x0 0x380 0x0 0x40>; + sound-name-prefix = "TDMIN_C"; + resets = <&clkc_audio AUD_RESET_TDMIN_C>; + clocks = <&clkc_audio AUD_CLKID_TDMIN_C>, + <&clkc_audio AUD_CLKID_TDMIN_C_SCLK>, + <&clkc_audio AUD_CLKID_TDMIN_C_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMIN_C_LRCLK>, + <&clkc_audio AUD_CLKID_TDMIN_C_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; + status = "disabled"; + }; + + tdmin_lb: audio-controller@3c0 { + compatible = "amlogic,sm1-tdmin", + "amlogic,axg-tdmin"; + reg = <0x0 0x3c0 0x0 0x40>; + sound-name-prefix = "TDMIN_LB"; + resets = <&clkc_audio AUD_RESET_TDMIN_LB>; + clocks = <&clkc_audio AUD_CLKID_TDMIN_LB>, + <&clkc_audio AUD_CLKID_TDMIN_LB_SCLK>, + <&clkc_audio AUD_CLKID_TDMIN_LB_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMIN_LB_LRCLK>, + <&clkc_audio AUD_CLKID_TDMIN_LB_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; + status = "disabled"; + }; + + tdmout_a: audio-controller@500 { + compatible = "amlogic,sm1-tdmout"; + reg = <0x0 0x500 0x0 0x40>; + sound-name-prefix = "TDMOUT_A"; + resets = <&clkc_audio AUD_RESET_TDMOUT_A>; + clocks = <&clkc_audio AUD_CLKID_TDMOUT_A>, + <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK>, + <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>, + <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; + status = "disabled"; + }; + + tdmout_b: audio-controller@540 { + compatible = "amlogic,sm1-tdmout"; + reg = <0x0 0x540 0x0 0x40>; + sound-name-prefix = "TDMOUT_B"; + resets = <&clkc_audio AUD_RESET_TDMOUT_B>; + clocks = <&clkc_audio AUD_CLKID_TDMOUT_B>, + <&clkc_audio AUD_CLKID_TDMOUT_B_SCLK>, + <&clkc_audio AUD_CLKID_TDMOUT_B_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMOUT_B_LRCLK>, + <&clkc_audio AUD_CLKID_TDMOUT_B_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; + status = "disabled"; + }; + + tdmout_c: audio-controller@580 { + compatible = "amlogic,sm1-tdmout"; + reg = <0x0 0x580 0x0 0x40>; + sound-name-prefix = "TDMOUT_C"; + resets = <&clkc_audio AUD_RESET_TDMOUT_C>; + clocks = <&clkc_audio AUD_CLKID_TDMOUT_C>, + <&clkc_audio AUD_CLKID_TDMOUT_C_SCLK>, + <&clkc_audio AUD_CLKID_TDMOUT_C_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMOUT_C_LRCLK>, + <&clkc_audio AUD_CLKID_TDMOUT_C_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; + status = "disabled"; + }; + + tohdmitx: audio-controller@744 { + compatible = "amlogic,sm1-tohdmitx", + "amlogic,g12a-tohdmitx"; + reg = <0x0 0x744 0x0 0x4>; + #sound-dai-cells = <1>; + sound-name-prefix = "TOHDMITX"; + resets = <&clkc_audio AUD_RESET_TOHDMITX>; + status = "disabled"; + }; + + toddr_d: audio-controller@840 { + compatible = "amlogic,sm1-toddr", + "amlogic,axg-toddr"; + reg = <0x0 0x840 0x0 0x2c>; + #sound-dai-cells = <0>; + sound-name-prefix = "TODDR_D"; + interrupts = <GIC_SPI 49 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_audio AUD_CLKID_TODDR_D>; + resets = <&arb AXG_ARB_TODDR_D>, + <&clkc_audio AUD_RESET_TODDR_D>; + reset-names = "arb", "rst"; + amlogic,fifo-depth = <256>; + status = "disabled"; + }; + + frddr_d: audio-controller@880 { + compatible = "amlogic,sm1-frddr", + "amlogic,axg-frddr"; + reg = <0x0 0x880 0x0 0x2c>; + #sound-dai-cells = <0>; + sound-name-prefix = "FRDDR_D"; + interrupts = <GIC_SPI 50 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_audio AUD_CLKID_FRDDR_D>; + resets = <&arb AXG_ARB_FRDDR_D>, + <&clkc_audio AUD_RESET_FRDDR_D>; + reset-names = "arb", "rst"; + amlogic,fifo-depth = <256>; + status = "disabled"; + }; + }; + + pdm: audio-controller@61000 { + compatible = "amlogic,sm1-pdm", + "amlogic,axg-pdm"; + reg = <0x0 0x61000 0x0 0x34>; + #sound-dai-cells = <0>; + sound-name-prefix = "PDM"; + clocks = <&clkc_audio AUD_CLKID_PDM>, + <&clkc_audio AUD_CLKID_PDM_DCLK>, + <&clkc_audio AUD_CLKID_PDM_SYSCLK>; + clock-names = "pclk", "dclk", "sysclk"; + status = "disabled"; + }; +}; + +&cecb_AO { + compatible = "amlogic,meson-sm1-ao-cec"; +}; + +&clk_msr { + compatible = "amlogic,meson-sm1-clk-measure"; +}; + + +&clkc { + compatible = "amlogic,sm1-clkc"; +}; + +ðmac { + power-domains = <&pwrc PWRC_SM1_ETH_ID>; +}; + +&gpio_intc { + compatible = "amlogic,meson-sm1-gpio-intc", + "amlogic,meson-gpio-intc"; +}; + +&pcie { + power-domains = <&pwrc PWRC_SM1_PCIE_ID>; +}; + +&pwrc { + compatible = "amlogic,meson-sm1-pwrc"; +}; + +&simplefb_cvbs { + power-domains = <&pwrc PWRC_SM1_VPU_ID>; +}; + +&simplefb_hdmi { + power-domains = <&pwrc PWRC_SM1_VPU_ID>; +}; + +&vdec { + compatible = "amlogic,sm1-vdec"; +}; + +&vpu { + power-domains = <&pwrc PWRC_SM1_VPU_ID>; +}; + +&usb { + power-domains = <&pwrc PWRC_SM1_USB_ID>; +}; diff --git a/arch/arm64/boot/dts/arm/fvp-base-revc.dts b/arch/arm64/boot/dts/arm/fvp-base-revc.dts index 687707020ec1..335fff762451 100644 --- a/arch/arm64/boot/dts/arm/fvp-base-revc.dts +++ b/arch/arm64/boot/dts/arm/fvp-base-revc.dts @@ -161,10 +161,10 @@ bus-range = <0x0 0x1>; reg = <0x0 0x40000000 0x0 0x10000000>; ranges = <0x2000000 0x0 0x50000000 0x0 0x50000000 0x0 0x10000000>; - interrupt-map = <0 0 0 1 &gic GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>, - <0 0 0 2 &gic GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>, - <0 0 0 3 &gic GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, - <0 0 0 4 &gic GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map = <0 0 0 1 &gic 0 0 GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &gic 0 0 GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &gic 0 0 GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &gic 0 0 GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>; interrupt-map-mask = <0x0 0x0 0x0 0x7>; msi-map = <0x0 &its 0x0 0x10000>; iommu-map = <0x0 &smmu 0x0 0x10000>; @@ -265,13 +265,5 @@ <0 0 42 &gic 0 0 GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>, <0 0 43 &gic 0 0 GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>, <0 0 44 &gic 0 0 GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; - - motherboard { - iofpga@3,00000000 { - clcd@1f0000 { - max-memory-bandwidth = <130000000>; /* 16bpp @ 63.5MHz */ - }; - }; - }; }; }; diff --git a/arch/arm64/boot/dts/arm/juno-base.dtsi b/arch/arm64/boot/dts/arm/juno-base.dtsi index 26a039a028b8..1f3c80aafbd7 100644 --- a/arch/arm64/boot/dts/arm/juno-base.dtsi +++ b/arch/arm64/boot/dts/arm/juno-base.dtsi @@ -6,7 +6,6 @@ /* * Devices shared by all Juno boards */ - dma-ranges = <0 0 0 0 0x100 0>; memtimer: timer@2a810000 { compatible = "arm,armv7-timer-mem"; @@ -35,6 +34,18 @@ clock-names = "apb_pclk"; }; + smmu_gpu: iommu@2b400000 { + compatible = "arm,mmu-400", "arm,smmu-v1"; + reg = <0x0 0x2b400000 0x0 0x10000>; + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <1>; + #global-interrupts = <1>; + power-domains = <&scpi_devpd 1>; + dma-coherent; + status = "disabled"; + }; + smmu_pcie: iommu@2b500000 { compatible = "arm,mmu-401", "arm,smmu-v1"; reg = <0x0 0x2b500000 0x0 0x10000>; @@ -487,6 +498,21 @@ }; }; + gpu: gpu@2d000000 { + compatible = "arm,juno-mali", "arm,mali-t624"; + reg = <0 0x2d000000 0 0x10000>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "gpu", "job", "mmu"; + clocks = <&scpi_dvfs 2>; + power-domains = <&scpi_devpd 1>; + dma-coherent; + /* The SMMU is only really of interest to bare-metal hypervisors */ + /* iommus = <&smmu_gpu 0>; */ + status = "disabled"; + }; + sram: sram@2e000000 { compatible = "arm,juno-sram-ns", "mmio-sram"; reg = <0x0 0x2e000000 0x0 0x8000>; diff --git a/arch/arm64/boot/dts/arm/juno-clocks.dtsi b/arch/arm64/boot/dts/arm/juno-clocks.dtsi index e5e265dfa902..2870b5eeb198 100644 --- a/arch/arm64/boot/dts/arm/juno-clocks.dtsi +++ b/arch/arm64/boot/dts/arm/juno-clocks.dtsi @@ -8,10 +8,10 @@ */ / { /* SoC fixed clocks */ - soc_uartclk: refclk7273800hz { + soc_uartclk: refclk7372800hz { compatible = "fixed-clock"; #clock-cells = <0>; - clock-frequency = <7273800>; + clock-frequency = <7372800>; clock-output-names = "juno:uartclk"; }; diff --git a/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi b/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi index 454cf6c44c49..03a7bf079c8f 100644 --- a/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi +++ b/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi @@ -188,8 +188,6 @@ interrupts = <14>; clocks = <&v2m_oscclk1>, <&v2m_clk24mhz>; clock-names = "clcdclk", "apb_pclk"; - /* 800x600 16bpp @36MHz works fine */ - max-memory-bandwidth = <54000000>; memory-region = <&vram>; port { diff --git a/arch/arm64/boot/dts/bitmain/bm1880-sophon-edge.dts b/arch/arm64/boot/dts/bitmain/bm1880-sophon-edge.dts index 3e8c70778e24..7a2c7f9c2660 100644 --- a/arch/arm64/boot/dts/bitmain/bm1880-sophon-edge.dts +++ b/arch/arm64/boot/dts/bitmain/bm1880-sophon-edge.dts @@ -49,12 +49,6 @@ reg = <0x1 0x00000000 0x0 0x40000000>; // 1GB }; - uart_clk: uart-clk { - compatible = "fixed-clock"; - clock-frequency = <500000000>; - #clock-cells = <0>; - }; - soc { gpio0: gpio@50027000 { porta: gpio-controller@0 { @@ -173,21 +167,18 @@ &uart0 { status = "okay"; - clocks = <&uart_clk>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart0_default>; }; &uart1 { status = "okay"; - clocks = <&uart_clk>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1_default>; }; &uart2 { status = "okay"; - clocks = <&uart_clk>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2_default>; }; diff --git a/arch/arm64/boot/dts/bitmain/bm1880.dtsi b/arch/arm64/boot/dts/bitmain/bm1880.dtsi index 7726fd4c6be6..fa6e6905f588 100644 --- a/arch/arm64/boot/dts/bitmain/bm1880.dtsi +++ b/arch/arm64/boot/dts/bitmain/bm1880.dtsi @@ -4,7 +4,9 @@ * Author: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> */ +#include <dt-bindings/clock/bm1880-clock.h> #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/reset/bitmain,bm1880-reset.h> / { compatible = "bitmain,bm1880"; @@ -65,6 +67,12 @@ <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; }; + osc: osc { + compatible = "fixed-clock"; + clock-frequency = <25000000>; + #clock-cells = <0>; + }; + soc { compatible = "simple-bus"; #address-cells = <2>; @@ -88,9 +96,24 @@ #size-cells = <1>; ranges = <0x0 0x0 0x50010000 0x1000>; - pinctrl: pinctrl@50 { + pinctrl: pinctrl@400 { compatible = "bitmain,bm1880-pinctrl"; - reg = <0x50 0x4B0>; + reg = <0x400 0x120>; + }; + + clk: clock-controller@e8 { + compatible = "bitmain,bm1880-clk"; + reg = <0xe8 0x0c>, <0x800 0xb0>; + reg-names = "pll", "sys"; + clocks = <&osc>; + clock-names = "osc"; + #clock-cells = <1>; + }; + + rst: reset-controller@c00 { + compatible = "bitmain,bm1880-reset"; + reg = <0xc00 0x8>; + #reset-cells = <1>; }; }; @@ -151,36 +174,52 @@ uart0: serial@58018000 { compatible = "snps,dw-apb-uart"; reg = <0x0 0x58018000 0x0 0x2000>; + clocks = <&clk BM1880_CLK_UART_500M>, + <&clk BM1880_CLK_APB_UART>; + clock-names = "baudclk", "apb_pclk"; interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; + resets = <&rst BM1880_RST_UART0_1_CLK>; status = "disabled"; }; uart1: serial@5801A000 { compatible = "snps,dw-apb-uart"; reg = <0x0 0x5801a000 0x0 0x2000>; + clocks = <&clk BM1880_CLK_UART_500M>, + <&clk BM1880_CLK_APB_UART>; + clock-names = "baudclk", "apb_pclk"; interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; + resets = <&rst BM1880_RST_UART0_1_ACLK>; status = "disabled"; }; uart2: serial@5801C000 { compatible = "snps,dw-apb-uart"; reg = <0x0 0x5801c000 0x0 0x2000>; + clocks = <&clk BM1880_CLK_UART_500M>, + <&clk BM1880_CLK_APB_UART>; + clock-names = "baudclk", "apb_pclk"; interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; + resets = <&rst BM1880_RST_UART2_3_CLK>; status = "disabled"; }; uart3: serial@5801E000 { compatible = "snps,dw-apb-uart"; reg = <0x0 0x5801e000 0x0 0x2000>; + clocks = <&clk BM1880_CLK_UART_500M>, + <&clk BM1880_CLK_APB_UART>; + clock-names = "baudclk", "apb_pclk"; interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; + resets = <&rst BM1880_RST_UART2_3_ACLK>; status = "disabled"; }; }; diff --git a/arch/arm64/boot/dts/broadcom/Makefile b/arch/arm64/boot/dts/broadcom/Makefile index d1d31ccad758..cb7de8d99223 100644 --- a/arch/arm64/boot/dts/broadcom/Makefile +++ b/arch/arm64/boot/dts/broadcom/Makefile @@ -1,5 +1,6 @@ # SPDX-License-Identifier: GPL-2.0 -dtb-$(CONFIG_ARCH_BCM2835) += bcm2837-rpi-3-a-plus.dtb \ +dtb-$(CONFIG_ARCH_BCM2835) += bcm2711-rpi-4-b.dtb \ + bcm2837-rpi-3-a-plus.dtb \ bcm2837-rpi-3-b.dtb \ bcm2837-rpi-3-b-plus.dtb \ bcm2837-rpi-cm3-io3.dtb diff --git a/arch/arm64/boot/dts/broadcom/bcm2711-rpi-4-b.dts b/arch/arm64/boot/dts/broadcom/bcm2711-rpi-4-b.dts new file mode 100644 index 000000000000..d24c53682e44 --- /dev/null +++ b/arch/arm64/boot/dts/broadcom/bcm2711-rpi-4-b.dts @@ -0,0 +1,2 @@ +// SPDX-License-Identifier: GPL-2.0 +#include "arm/bcm2711-rpi-4-b.dts" diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray-pinctrl.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray-pinctrl.dtsi index 8a3a770e8f2c..56789ccf9454 100644 --- a/arch/arm64/boot/dts/broadcom/stingray/stingray-pinctrl.dtsi +++ b/arch/arm64/boot/dts/broadcom/stingray/stingray-pinctrl.dtsi @@ -42,13 +42,14 @@ pinmux: pinmux@14029c { compatible = "pinctrl-single"; - reg = <0x0014029c 0x250>; + reg = <0x0014029c 0x26c>; #address-cells = <1>; #size-cells = <1>; pinctrl-single,register-width = <32>; pinctrl-single,function-mask = <0xf>; pinctrl-single,gpio-range = < - &range 0 154 MODE_GPIO + &range 0 91 MODE_GPIO + &range 95 60 MODE_GPIO >; range: gpio-range { #pinctrl-single,gpio-range-cells = <3>; diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi index 71e2e34400d4..0098dfdef96c 100644 --- a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi +++ b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi @@ -464,8 +464,7 @@ <&pinmux 108 16 27>, <&pinmux 135 77 6>, <&pinmux 141 67 4>, - <&pinmux 145 149 6>, - <&pinmux 151 91 4>; + <&pinmux 145 149 6>; }; i2c1: i2c@e0000 { diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi index 6f90b0e62cba..250fc01de78d 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * SAMSUNG Exynos5433 TM2 board device tree source + * Samsung Exynos5433 TM2 board device tree source * * Copyright (c) 2016 Samsung Electronics Co., Ltd. * diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts index dda5d2746a74..fdd0796b29d4 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * SAMSUNG Exynos5433 TM2 board device tree source + * Samsung Exynos5433 TM2 board device tree source * * Copyright (c) 2016 Samsung Electronics Co., Ltd. * diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts index 1e207ce8b97b..089fc7a1af67 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * SAMSUNG Exynos5433 TM2E board device tree source + * Samsung Exynos5433 TM2E board device tree source * * Copyright (c) 2016 Samsung Electronics Co., Ltd. * diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi index a76f620f7f35..6721966140f4 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi @@ -18,8 +18,8 @@ / { compatible = "samsung,exynos5433"; - #address-cells = <1>; - #size-cells = <1>; + #address-cells = <2>; + #size-cells = <2>; interrupt-parent = <&gic>; @@ -249,57 +249,6 @@ }; }; - gpu: gpu@14ac0000 { - compatible = "samsung,exynos5433-mali", "arm,mali-t760"; - reg = <0x14ac0000 0x5000>; - interrupts = <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "job", "mmu", "gpu"; - clocks = <&cmu_g3d CLK_ACLK_G3D>; - clock-names = "core"; - power-domains = <&pd_g3d>; - operating-points-v2 = <&gpu_opp_table>; - status = "disabled"; - - gpu_opp_table: opp_table { - compatible = "operating-points-v2"; - - opp-160000000 { - opp-hz = /bits/ 64 <160000000>; - opp-microvolt = <1000000>; - }; - opp-267000000 { - opp-hz = /bits/ 64 <267000000>; - opp-microvolt = <1000000>; - }; - opp-350000000 { - opp-hz = /bits/ 64 <350000000>; - opp-microvolt = <1025000>; - }; - opp-420000000 { - opp-hz = /bits/ 64 <420000000>; - opp-microvolt = <1025000>; - }; - opp-500000000 { - opp-hz = /bits/ 64 <500000000>; - opp-microvolt = <1075000>; - }; - opp-550000000 { - opp-hz = /bits/ 64 <550000000>; - opp-microvolt = <1125000>; - }; - opp-600000000 { - opp-hz = /bits/ 64 <600000000>; - opp-microvolt = <1150000>; - }; - opp-700000000 { - opp-hz = /bits/ 64 <700000000>; - opp-microvolt = <1150000>; - }; - }; - }; - psci { compatible = "arm,psci"; method = "smc"; @@ -311,7 +260,7 @@ compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; - ranges; + ranges = <0x0 0x0 0x0 0x18000000>; chipid@10000000 { compatible = "samsung,exynos4210-chipid"; @@ -754,7 +703,7 @@ status = "disabled"; }; - mct@101c0000 { + timer@101c0000 { compatible = "samsung,exynos4210-mct"; reg = <0x101c0000 0x800>; interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, @@ -1125,6 +1074,57 @@ power-domains = <&pd_gscl>; }; + gpu: gpu@14ac0000 { + compatible = "samsung,exynos5433-mali", "arm,mali-t760"; + reg = <0x14ac0000 0x5000>; + interrupts = <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "job", "mmu", "gpu"; + clocks = <&cmu_g3d CLK_ACLK_G3D>; + clock-names = "core"; + power-domains = <&pd_g3d>; + operating-points-v2 = <&gpu_opp_table>; + status = "disabled"; + + gpu_opp_table: opp_table { + compatible = "operating-points-v2"; + + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + opp-microvolt = <1000000>; + }; + opp-267000000 { + opp-hz = /bits/ 64 <267000000>; + opp-microvolt = <1000000>; + }; + opp-350000000 { + opp-hz = /bits/ 64 <350000000>; + opp-microvolt = <1025000>; + }; + opp-420000000 { + opp-hz = /bits/ 64 <420000000>; + opp-microvolt = <1025000>; + }; + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + opp-microvolt = <1075000>; + }; + opp-550000000 { + opp-hz = /bits/ 64 <550000000>; + opp-microvolt = <1125000>; + }; + opp-600000000 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <1150000>; + }; + opp-700000000 { + opp-hz = /bits/ 64 <700000000>; + opp-microvolt = <1150000>; + }; + }; + }; + scaler_0: scaler@15000000 { compatible = "samsung,exynos5433-scaler"; reg = <0x15000000 0x1294>; @@ -1179,9 +1179,9 @@ compatible = "samsung,exynos-sysmmu"; reg = <0x13a00000 0x1000>; interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "pclk", "aclk"; - clocks = <&cmu_disp CLK_PCLK_SMMU_DECON0X>, - <&cmu_disp CLK_ACLK_SMMU_DECON0X>; + clock-names = "aclk", "pclk"; + clocks = <&cmu_disp CLK_ACLK_SMMU_DECON0X>, + <&cmu_disp CLK_PCLK_SMMU_DECON0X>; power-domains = <&pd_disp>; #iommu-cells = <0>; }; @@ -1190,9 +1190,9 @@ compatible = "samsung,exynos-sysmmu"; reg = <0x13a10000 0x1000>; interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "pclk", "aclk"; - clocks = <&cmu_disp CLK_PCLK_SMMU_DECON1X>, - <&cmu_disp CLK_ACLK_SMMU_DECON1X>; + clock-names = "aclk", "pclk"; + clocks = <&cmu_disp CLK_ACLK_SMMU_DECON1X>, + <&cmu_disp CLK_PCLK_SMMU_DECON1X>; #iommu-cells = <0>; power-domains = <&pd_disp>; }; @@ -1201,9 +1201,9 @@ compatible = "samsung,exynos-sysmmu"; reg = <0x13a20000 0x1000>; interrupts = <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "pclk", "aclk"; - clocks = <&cmu_disp CLK_PCLK_SMMU_TV0X>, - <&cmu_disp CLK_ACLK_SMMU_TV0X>; + clock-names = "aclk", "pclk"; + clocks = <&cmu_disp CLK_ACLK_SMMU_TV0X>, + <&cmu_disp CLK_PCLK_SMMU_TV0X>; #iommu-cells = <0>; power-domains = <&pd_disp>; }; @@ -1212,9 +1212,9 @@ compatible = "samsung,exynos-sysmmu"; reg = <0x13a30000 0x1000>; interrupts = <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "pclk", "aclk"; - clocks = <&cmu_disp CLK_PCLK_SMMU_TV1X>, - <&cmu_disp CLK_ACLK_SMMU_TV1X>; + clock-names = "aclk", "pclk"; + clocks = <&cmu_disp CLK_ACLK_SMMU_TV1X>, + <&cmu_disp CLK_PCLK_SMMU_TV1X>; #iommu-cells = <0>; power-domains = <&pd_disp>; }; @@ -1256,9 +1256,9 @@ compatible = "samsung,exynos-sysmmu"; reg = <0x15040000 0x1000>; interrupts = <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "pclk", "aclk"; - clocks = <&cmu_mscl CLK_PCLK_SMMU_M2MSCALER0>, - <&cmu_mscl CLK_ACLK_SMMU_M2MSCALER0>; + clock-names = "aclk", "pclk"; + clocks = <&cmu_mscl CLK_ACLK_SMMU_M2MSCALER0>, + <&cmu_mscl CLK_PCLK_SMMU_M2MSCALER0>; #iommu-cells = <0>; power-domains = <&pd_mscl>; }; @@ -1267,9 +1267,9 @@ compatible = "samsung,exynos-sysmmu"; reg = <0x15050000 0x1000>; interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "pclk", "aclk"; - clocks = <&cmu_mscl CLK_PCLK_SMMU_M2MSCALER1>, - <&cmu_mscl CLK_ACLK_SMMU_M2MSCALER1>; + clock-names = "aclk", "pclk"; + clocks = <&cmu_mscl CLK_ACLK_SMMU_M2MSCALER1>, + <&cmu_mscl CLK_PCLK_SMMU_M2MSCALER1>; #iommu-cells = <0>; power-domains = <&pd_mscl>; }; @@ -1278,9 +1278,9 @@ compatible = "samsung,exynos-sysmmu"; reg = <0x15060000 0x1000>; interrupts = <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "pclk", "aclk"; - clocks = <&cmu_mscl CLK_PCLK_SMMU_JPEG>, - <&cmu_mscl CLK_ACLK_SMMU_JPEG>; + clock-names = "aclk", "pclk"; + clocks = <&cmu_mscl CLK_ACLK_SMMU_JPEG>, + <&cmu_mscl CLK_PCLK_SMMU_JPEG>; #iommu-cells = <0>; power-domains = <&pd_mscl>; }; @@ -1289,9 +1289,9 @@ compatible = "samsung,exynos-sysmmu"; reg = <0x15200000 0x1000>; interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "pclk", "aclk"; - clocks = <&cmu_mfc CLK_PCLK_SMMU_MFC_0>, - <&cmu_mfc CLK_ACLK_SMMU_MFC_0>; + clock-names = "aclk", "pclk"; + clocks = <&cmu_mfc CLK_ACLK_SMMU_MFC_0>, + <&cmu_mfc CLK_PCLK_SMMU_MFC_0>; #iommu-cells = <0>; power-domains = <&pd_mfc>; }; @@ -1300,9 +1300,9 @@ compatible = "samsung,exynos-sysmmu"; reg = <0x15210000 0x1000>; interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "pclk", "aclk"; - clocks = <&cmu_mfc CLK_PCLK_SMMU_MFC_1>, - <&cmu_mfc CLK_ACLK_SMMU_MFC_1>; + clock-names = "aclk", "pclk"; + clocks = <&cmu_mfc CLK_ACLK_SMMU_MFC_1>, + <&cmu_mfc CLK_PCLK_SMMU_MFC_1>; #iommu-cells = <0>; power-domains = <&pd_mfc>; }; @@ -1452,7 +1452,7 @@ i2s1: i2s@14d60000 { compatible = "samsung,exynos7-i2s"; reg = <0x14d60000 0x100>; - dmas = <&pdma0 31 &pdma0 30>; + dmas = <&pdma0 31>, <&pdma0 30>; dma-names = "tx", "rx"; interrupts = <GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cmu_peric CLK_PCLK_I2S1>, @@ -1811,7 +1811,7 @@ i2s0: i2s@11440000 { compatible = "samsung,exynos7-i2s"; reg = <0x11440000 0x100>; - dmas = <&adma 0 &adma 2>; + dmas = <&adma 0>, <&adma 2>; dma-names = "tx", "rx"; interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; diff --git a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts index 080e0f56e108..7af288fa9475 100644 --- a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts +++ b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * SAMSUNG Exynos7 Espresso board device tree source + * Samsung Exynos7 Espresso board device tree source * * Copyright (c) 2014 Samsung Electronics Co., Ltd. * http://www.samsung.com @@ -13,7 +13,7 @@ #include <dt-bindings/gpio/gpio.h> / { - model = "Samsung Exynos7 Espresso board based on EXYNOS7"; + model = "Samsung Exynos7 Espresso board based on Exynos7"; compatible = "samsung,exynos7-espresso", "samsung,exynos7"; aliases { diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi index bcb9d8cee267..5558045637ac 100644 --- a/arch/arm64/boot/dts/exynos/exynos7.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * SAMSUNG EXYNOS7 SoC device tree source + * Samsung Exynos7 SoC device tree source * * Copyright (c) 2014 Samsung Electronics Co., Ltd. * http://www.samsung.com @@ -12,8 +12,8 @@ / { compatible = "samsung,exynos7"; interrupt-parent = <&gic>; - #address-cells = <1>; - #size-cells = <1>; + #address-cells = <2>; + #size-cells = <2>; aliases { pinctrl0 = &pinctrl_alive; @@ -78,17 +78,6 @@ }; }; - gpu: gpu@14ac0000 { - compatible = "samsung,exynos5433-mali", "arm,mali-t760"; - reg = <0x14ac0000 0x5000>; - interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "job", "mmu", "gpu"; - status = "disabled"; - /* TODO: operating points for DVFS, cooling device */ - }; - psci { compatible = "arm,psci-0.2"; method = "smc"; @@ -98,7 +87,7 @@ compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; - ranges; + ranges = <0 0 0 0x18000000>; chipid@10000000 { compatible = "samsung,exynos4210-chipid"; @@ -523,6 +512,17 @@ status = "disabled"; }; + gpu: gpu@14ac0000 { + compatible = "samsung,exynos5433-mali", "arm,mali-t760"; + reg = <0x14ac0000 0x5000>; + interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "job", "mmu", "gpu"; + status = "disabled"; + /* TODO: operating points for DVFS, cooling device */ + }; + mmc_0: mmc@15740000 { compatible = "samsung,exynos7-dw-mshc-smu"; interrupts = <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile index c043aca66572..bac293e6ee33 100644 --- a/arch/arm64/boot/dts/freescale/Makefile +++ b/arch/arm64/boot/dts/freescale/Makefile @@ -8,6 +8,7 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-rdb.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-qds.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-rdb.dtb +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-frwy.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-qds.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-rdb.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1088a-qds.dtb @@ -17,12 +18,25 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-rdb.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-simu.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-qds.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-rdb.dtb +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-clearfog-cx.dtb +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-honeycomb.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-qds.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-rdb.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-evk.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mn-evk.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mn-ddr4-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mq-evk.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mq-hummingboard-pulse.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mq-librem5-devkit.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mq-nitrogen.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mq-phanbell.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mq-pico-pi.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mq-thor96.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mq-zii-ultra-rmb3.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mq-zii-ultra-zest.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8qxp-ai_ml.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8qxp-colibri-eval-v3.dtb dtb-$(CONFIG_ARCH_MXC) += imx8qxp-mek.dtb + +dtb-$(CONFIG_ARCH_S32) += s32v234-evb.dtb diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi index ec6257a5b251..337919366dc8 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi @@ -323,7 +323,7 @@ #size-cells = <0>; reg = <0x0 0x2180000 0x0 0x10000>; interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 0>; + clocks = <&clockgen 4 3>; status = "disabled"; }; @@ -333,7 +333,7 @@ #size-cells = <0>; reg = <0x0 0x2190000 0x0 0x10000>; interrupts = <0 57 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 0>; + clocks = <&clockgen 4 3>; status = "disabled"; }; @@ -486,7 +486,6 @@ #address-cells = <3>; #size-cells = <2>; device_type = "pci"; - num-lanes = <4>; num-viewport = <2>; bus-range = <0x0 0xff>; ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000 /* downstream I/O */ diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts index de6ef39f3118..ca409d907b36 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts @@ -85,6 +85,26 @@ system-clock-frequency = <25000000>; }; }; + + mdio-mux { + compatible = "mdio-mux-multiplexer"; + mux-controls = <&mux 0>; + mdio-parent-bus = <&enetc_mdio_pf3>; + #address-cells=<1>; + #size-cells = <0>; + + /* on-board RGMII PHY */ + mdio@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + qds_phy1: ethernet-phy@5 { + /* Atheros 8035 */ + reg = <5>; + }; + }; + }; }; &duart0 { @@ -95,11 +115,34 @@ status = "okay"; }; +&esdhc { + status = "okay"; +}; + +&esdhc1 { + status = "okay"; +}; + +&fspi { + status = "okay"; + + mt35xu02g0: flash@0 { + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <50000000>; + /* The following setting enables 1-1-8 (CMD-ADDR-DATA) mode */ + spi-rx-bus-width = <8>; /* 8 SPI Rx lines */ + spi-tx-bus-width = <1>; /* 1 SPI Tx line */ + reg = <0>; + }; +}; + &i2c0 { status = "okay"; i2c-mux@77 { - compatible = "nxp,pca9847"; + compatible = "nxp,pca9547"; reg = <0x77>; #address-cells = <1>; #size-cells = <0>; @@ -164,6 +207,24 @@ }; }; }; + + fpga@66 { + compatible = "fsl,ls1028aqds-fpga", "fsl,fpga-qixis-i2c", + "simple-mfd"; + reg = <0x66>; + + mux: mux-controller { + compatible = "reg-mux"; + #mux-control-cells = <1>; + mux-reg-masks = <0x54 0xf0>; /* 0: reg 0x54, bits 7:4 */ + }; + }; + +}; + +&enetc_port1 { + phy-handle = <&qds_phy1>; + phy-connection-type = "rgmii-id"; }; &sai1 { diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts index 9fb911317ecd..afb55653850d 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts @@ -83,6 +83,36 @@ }; }; +&esdhc { + sd-uhs-sdr104; + sd-uhs-sdr50; + sd-uhs-sdr25; + sd-uhs-sdr12; + status = "okay"; +}; + +&esdhc1 { + mmc-hs200-1_8v; + mmc-hs400-1_8v; + bus-width = <8>; + status = "okay"; +}; + +&fspi { + status = "okay"; + + mt35xu02g0: flash@0 { + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <50000000>; + /* The following setting enables 1-1-8 (CMD-ADDR-DATA) mode */ + spi-rx-bus-width = <8>; /* 8 SPI Rx lines */ + spi-tx-bus-width = <1>; /* 1 SPI Tx line */ + reg = <0>; + }; +}; + &i2c0 { status = "okay"; @@ -171,3 +201,7 @@ &sata { status = "okay"; }; + +&usb1 { + dr_mode = "otg"; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi index 7975519b4f56..0bf375ec959b 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi @@ -29,6 +29,7 @@ clocks = <&clockgen 1 0>; next-level-cache = <&l2>; cpu-idle-states = <&CPU_PW20>; + #cooling-cells = <2>; }; cpu1: cpu@1 { @@ -39,6 +40,7 @@ clocks = <&clockgen 1 0>; next-level-cache = <&l2>; cpu-idle-states = <&CPU_PW20>; + #cooling-cells = <2>; }; l2: l2-cache { @@ -70,30 +72,23 @@ clock-output-names = "sysclk"; }; - dpclk: clock-dp { + osc_27m: clock-osc-27m { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <27000000>; - clock-output-names= "dpclk"; + clock-output-names = "phy_27m"; }; - aclk: clock-axi { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <650000000>; - clock-output-names= "aclk"; - }; - - pclk: clock-apb { - compatible = "fixed-clock"; + dpclk: clock-controller@f1f0000 { + compatible = "fsl,ls1028a-plldig"; + reg = <0x0 0xf1f0000 0x0 0xffff>; #clock-cells = <0>; - clock-frequency = <650000000>; - clock-output-names= "pclk"; + clocks = <&osc_27m>; }; reboot { compatible ="syscon-reboot"; - regmap = <&dcfg>; + regmap = <&rst>; offset = <0xb0>; mask = <0x02>; }; @@ -133,6 +128,37 @@ }; }; + thermal-zones { + core-cluster { + polling-delay-passive = <1000>; + polling-delay = <5000>; + thermal-sensors = <&tmu 0>; + + trips { + core_cluster_alert: core-cluster-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + core_cluster_crit: core-cluster-crit { + temperature = <95000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&core_cluster_alert>; + cooling-device = + <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + }; + soc: soc { compatible = "simple-bus"; #address-cells = <2>; @@ -149,7 +175,13 @@ dcfg: syscon@1e00000 { compatible = "fsl,ls1028a-dcfg", "syscon"; reg = <0x0 0x1e00000 0x0 0x10000>; - big-endian; + little-endian; + }; + + rst: syscon@1e60000 { + compatible = "syscon"; + reg = <0x0 0x1e60000 0x0 0x10000>; + little-endian; }; scfg: syscon@1fc0000 { @@ -171,7 +203,7 @@ #size-cells = <0>; reg = <0x0 0x2000000 0x0 0x10000>; interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 1>; + clocks = <&clockgen 4 3>; status = "disabled"; }; @@ -181,7 +213,7 @@ #size-cells = <0>; reg = <0x0 0x2010000 0x0 0x10000>; interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 1>; + clocks = <&clockgen 4 3>; status = "disabled"; }; @@ -191,7 +223,7 @@ #size-cells = <0>; reg = <0x0 0x2020000 0x0 0x10000>; interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 1>; + clocks = <&clockgen 4 3>; status = "disabled"; }; @@ -201,7 +233,7 @@ #size-cells = <0>; reg = <0x0 0x2030000 0x0 0x10000>; interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 1>; + clocks = <&clockgen 4 3>; status = "disabled"; }; @@ -211,7 +243,7 @@ #size-cells = <0>; reg = <0x0 0x2040000 0x0 0x10000>; interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 1>; + clocks = <&clockgen 4 3>; status = "disabled"; }; @@ -221,7 +253,7 @@ #size-cells = <0>; reg = <0x0 0x2050000 0x0 0x10000>; interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 1>; + clocks = <&clockgen 4 3>; status = "disabled"; }; @@ -231,7 +263,7 @@ #size-cells = <0>; reg = <0x0 0x2060000 0x0 0x10000>; interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 1>; + clocks = <&clockgen 4 3>; status = "disabled"; }; @@ -241,7 +273,47 @@ #size-cells = <0>; reg = <0x0 0x2070000 0x0 0x10000>; interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 1>; + clocks = <&clockgen 4 3>; + status = "disabled"; + }; + + fspi: spi@20c0000 { + compatible = "nxp,lx2160a-fspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x20c0000 0x0 0x10000>, + <0x0 0x20000000 0x0 0x10000000>; + reg-names = "fspi_base", "fspi_mmap"; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 3>, <&clockgen 4 3>; + clock-names = "fspi_en", "fspi"; + status = "disabled"; + }; + + esdhc: mmc@2140000 { + compatible = "fsl,ls1028a-esdhc", "fsl,esdhc"; + reg = <0x0 0x2140000 0x0 0x10000>; + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <0>; /* fixed up by bootloader */ + clocks = <&clockgen 2 1>; + voltage-ranges = <1800 1800 3300 3300>; + sdhci,auto-cmd12; + little-endian; + bus-width = <4>; + status = "disabled"; + }; + + esdhc1: mmc@2150000 { + compatible = "fsl,ls1028a-esdhc", "fsl,esdhc"; + reg = <0x0 0x2150000 0x0 0x10000>; + interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <0>; /* fixed up by bootloader */ + clocks = <&clockgen 2 1>; + voltage-ranges = <1800 1800 3300 3300>; + sdhci,auto-cmd12; + broken-cd; + little-endian; + bus-width = <4>; status = "disabled"; }; @@ -263,7 +335,7 @@ edma0: dma-controller@22c0000 { #dma-cells = <2>; - compatible = "fsl,vf610-edma"; + compatible = "fsl,ls1028a-edma"; reg = <0x0 0x22c0000 0x0 0x10000>, <0x0 0x22d0000 0x0 0x10000>, <0x0 0x22e0000 0x0 0x10000>; @@ -277,33 +349,36 @@ }; gpio1: gpio@2300000 { - compatible = "fsl,qoriq-gpio"; + compatible = "fsl,ls1028a-gpio","fsl,qoriq-gpio"; reg = <0x0 0x2300000 0x0 0x10000>; interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; + little-endian; }; gpio2: gpio@2310000 { - compatible = "fsl,qoriq-gpio"; + compatible = "fsl,ls1028a-gpio","fsl,qoriq-gpio"; reg = <0x0 0x2310000 0x0 0x10000>; interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; + little-endian; }; gpio3: gpio@2320000 { - compatible = "fsl,qoriq-gpio"; + compatible = "fsl,ls1028a-gpio","fsl,qoriq-gpio"; reg = <0x0 0x2320000 0x0 0x10000>; interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; + little-endian; }; usb0: usb@3100000 { @@ -472,6 +547,7 @@ dma-names = "tx", "rx"; dmas = <&edma0 1 4>, <&edma0 1 3>; + fsl,sai-asynchronous; status = "disabled"; }; @@ -486,6 +562,22 @@ dma-names = "tx", "rx"; dmas = <&edma0 1 6>, <&edma0 1 5>; + fsl,sai-asynchronous; + status = "disabled"; + }; + + sai3: audio-controller@f120000 { + #sound-dai-cells = <0>; + compatible = "fsl,vf610-sai"; + reg = <0x0 0xf120000 0x0 0x10000>; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 1>, <&clockgen 4 1>, + <&clockgen 4 1>, <&clockgen 4 1>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; + dma-names = "tx", "rx"; + dmas = <&edma0 1 8>, + <&edma0 1 7>; + fsl,sai-asynchronous; status = "disabled"; }; @@ -500,9 +592,92 @@ dma-names = "tx", "rx"; dmas = <&edma0 1 10>, <&edma0 1 9>; + fsl,sai-asynchronous; + status = "disabled"; + }; + + sai5: audio-controller@f140000 { + #sound-dai-cells = <0>; + compatible = "fsl,vf610-sai"; + reg = <0x0 0xf140000 0x0 0x10000>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 1>, <&clockgen 4 1>, + <&clockgen 4 1>, <&clockgen 4 1>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; + dma-names = "tx", "rx"; + dmas = <&edma0 1 12>, + <&edma0 1 11>; + fsl,sai-asynchronous; + status = "disabled"; + }; + + sai6: audio-controller@f150000 { + #sound-dai-cells = <0>; + compatible = "fsl,vf610-sai"; + reg = <0x0 0xf150000 0x0 0x10000>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 1>, <&clockgen 4 1>, + <&clockgen 4 1>, <&clockgen 4 1>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; + dma-names = "tx", "rx"; + dmas = <&edma0 1 14>, + <&edma0 1 13>; + fsl,sai-asynchronous; status = "disabled"; }; + tmu: tmu@1f80000 { + compatible = "fsl,qoriq-tmu"; + reg = <0x0 0x1f80000 0x0 0x10000>; + interrupts = <0 23 0x4>; + fsl,tmu-range = <0xb0000 0xa0026 0x80048 0x70061>; + fsl,tmu-calibration = <0x00000000 0x00000024 + 0x00000001 0x0000002b + 0x00000002 0x00000031 + 0x00000003 0x00000038 + 0x00000004 0x0000003f + 0x00000005 0x00000045 + 0x00000006 0x0000004c + 0x00000007 0x00000053 + 0x00000008 0x00000059 + 0x00000009 0x00000060 + 0x0000000a 0x00000066 + 0x0000000b 0x0000006d + + 0x00010000 0x0000001c + 0x00010001 0x00000024 + 0x00010002 0x0000002c + 0x00010003 0x00000035 + 0x00010004 0x0000003d + 0x00010005 0x00000045 + 0x00010006 0x0000004d + 0x00010007 0x00000055 + 0x00010008 0x0000005e + 0x00010009 0x00000066 + 0x0001000a 0x0000006e + + 0x00020000 0x00000018 + 0x00020001 0x00000022 + 0x00020002 0x0000002d + 0x00020003 0x00000038 + 0x00020004 0x00000043 + 0x00020005 0x0000004d + 0x00020006 0x00000058 + 0x00020007 0x00000063 + 0x00020008 0x0000006e + + 0x00030000 0x00000010 + 0x00030001 0x0000001c + 0x00030002 0x00000029 + 0x00030003 0x00000036 + 0x00030004 0x00000042 + 0x00030005 0x0000004f + 0x00030006 0x0000005b + 0x00030007 0x00000068>; + little-endian; + #thermal-sensor-cells = <1>; + }; + pcie@1f0000000 { /* Integrated Endpoint Root Complex */ compatible = "pci-host-ecam-generic"; reg = <0x01 0xf0000000 0x0 0x100000>; @@ -536,6 +711,12 @@ compatible = "fsl,enetc"; reg = <0x000100 0 0 0 0>; }; + enetc_mdio_pf3: mdio@0,3 { + compatible = "fsl,enetc-mdio"; + reg = <0x000300 0 0 0 0>; + #address-cells = <1>; + #size-cells = <0>; + }; ethernet@0,4 { compatible = "fsl,enetc-ptp"; reg = <0x000400 0 0 0 0>; @@ -551,9 +732,11 @@ interrupts = <0 222 IRQ_TYPE_LEVEL_HIGH>, <0 223 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "DE", "SE"; - clocks = <&dpclk>, <&aclk>, <&aclk>, <&pclk>; + clocks = <&dpclk>, <&clockgen 2 2>, <&clockgen 2 2>, + <&clockgen 2 2>; clock-names = "pxlclk", "mclk", "aclk", "pclk"; arm,malidp-output-port-lines = /bits/ 8 <8 8 8>; + arm,malidp-arqos-value = <0xd000d000>; port { dp0_out: endpoint { diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi index 71d9ed9ff985..c084c7a4b6a6 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi @@ -677,7 +677,6 @@ #size-cells = <2>; device_type = "pci"; dma-coherent; - num-lanes = <4>; num-viewport = <6>; bus-range = <0x0 0xff>; ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000 /* downstream I/O */ @@ -704,7 +703,6 @@ #size-cells = <2>; device_type = "pci"; dma-coherent; - num-lanes = <2>; num-viewport = <6>; bus-range = <0x0 0xff>; ranges = <0x81000000 0x0 0x00000000 0x48 0x00010000 0x0 0x00010000 /* downstream I/O */ @@ -731,7 +729,6 @@ #size-cells = <2>; device_type = "pci"; dma-coherent; - num-lanes = <2>; num-viewport = <6>; bus-range = <0x0 0xff>; ranges = <0x81000000 0x0 0x00000000 0x50 0x00010000 0x0 0x00010000 /* downstream I/O */ diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts new file mode 100644 index 000000000000..db3d303093f6 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts @@ -0,0 +1,169 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree Include file for Freescale Layerscape-1046A family SoC. + * + * Copyright 2019 NXP. + * + */ + +/dts-v1/; + +#include "fsl-ls1046a.dtsi" + +/ { + model = "LS1046A FRWY Board"; + compatible = "fsl,ls1046a-frwy", "fsl,ls1046a"; + + aliases { + serial0 = &duart0; + serial1 = &duart1; + serial2 = &duart2; + serial3 = &duart3; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + sb_3v3: regulator-sb3v3 { + compatible = "regulator-fixed"; + regulator-name = "LT8642SEV-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; +}; + +&duart0 { + status = "okay"; +}; + +&duart1 { + status = "okay"; +}; + +&duart2 { + status = "okay"; +}; + +&duart3 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + i2c-mux@77 { + compatible = "nxp,pca9546"; + reg = <0x77>; + #address-cells = <1>; + #size-cells = <0>; + + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + power-monitor@40 { + compatible = "ti,ina220"; + reg = <0x40>; + shunt-resistor = <1000>; + }; + + temperature-sensor@4c { + compatible = "nxp,sa56004"; + reg = <0x4c>; + vcc-supply = <&sb_3v3>; + }; + + rtc@51 { + compatible = "nxp,pcf2129"; + reg = <0x51>; + }; + + eeprom@52 { + compatible = "atmel,24c512"; + reg = <0x52>; + }; + + eeprom@53 { + compatible = "atmel,24c512"; + reg = <0x53>; + }; + + }; + }; +}; + +&ifc { + #address-cells = <2>; + #size-cells = <1>; + /* NAND Flash */ + ranges = <0x0 0x0 0x0 0x7e800000 0x00010000>; + status = "okay"; + + nand@0,0 { + compatible = "fsl,ifc-nand"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x0 0x0 0x10000>; + }; + +}; + +&qspi { + status = "okay"; + + mt25qu512a0: flash@0 { + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <50000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <1>; + reg = <0>; + }; +}; + +#include "fsl-ls1046-post.dtsi" + +&fman0 { + ethernet@e0000 { + phy-handle = <&qsgmii_phy4>; + phy-connection-type = "qsgmii"; + }; + + ethernet@e8000 { + phy-handle = <&qsgmii_phy2>; + phy-connection-type = "qsgmii"; + }; + + ethernet@ea000 { + phy-handle = <&qsgmii_phy1>; + phy-connection-type = "qsgmii"; + }; + + ethernet@f2000 { + phy-handle = <&qsgmii_phy3>; + phy-connection-type = "qsgmii"; + }; + + mdio@fd000 { + qsgmii_phy1: ethernet-phy@1c { + reg = <0x1c>; + }; + + qsgmii_phy2: ethernet-phy@1d { + reg = <0x1d>; + }; + + qsgmii_phy3: ethernet-phy@1e { + reg = <0x1e>; + }; + + qsgmii_phy4: ethernet-phy@1f { + reg = <0x1f>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts index 6a6514d0e5a9..dbc23d6cd3b4 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts @@ -101,27 +101,31 @@ &qspi { status = "okay"; - qflash0: flash@0 { - compatible = "spansion,m25p80"; + s25fs512s0: flash@0 { + compatible = "jedec,spi-nor"; #address-cells = <1>; #size-cells = <1>; - spi-max-frequency = <20000000>; + spi-max-frequency = <50000000>; spi-rx-bus-width = <4>; - spi-tx-bus-width = <4>; + spi-tx-bus-width = <1>; reg = <0>; }; - qflash1: flash@1 { - compatible = "spansion,m25p80"; + s25fs512s1: flash@1 { + compatible = "jedec,spi-nor"; #address-cells = <1>; #size-cells = <1>; - spi-max-frequency = <20000000>; + spi-max-frequency = <50000000>; spi-rx-bus-width = <4>; - spi-tx-bus-width = <4>; + spi-tx-bus-width = <1>; reg = <1>; }; }; +&usb1 { + dr_mode = "otg"; +}; + #include "fsl-ls1046-post.dtsi" &fman0 { diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi index b0ef08b090dd..d4c1da3d4bde 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi @@ -649,7 +649,6 @@ #size-cells = <2>; device_type = "pci"; dma-coherent; - num-lanes = <4>; num-viewport = <8>; bus-range = <0x0 0xff>; ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000 /* downstream I/O */ @@ -671,7 +670,6 @@ reg-names = "regs", "addr_space"; num-ib-windows = <6>; num-ob-windows = <8>; - num-lanes = <2>; status = "disabled"; }; @@ -687,7 +685,6 @@ #size-cells = <2>; device_type = "pci"; dma-coherent; - num-lanes = <2>; num-viewport = <8>; bus-range = <0x0 0xff>; ranges = <0x81000000 0x0 0x00000000 0x48 0x00010000 0x0 0x00010000 /* downstream I/O */ @@ -709,7 +706,6 @@ reg-names = "regs", "addr_space"; num-ib-windows = <6>; num-ob-windows = <8>; - num-lanes = <2>; status = "disabled"; }; @@ -725,7 +721,6 @@ #size-cells = <2>; device_type = "pci"; dma-coherent; - num-lanes = <2>; num-viewport = <8>; bus-range = <0x0 0xff>; ranges = <0x81000000 0x0 0x00000000 0x50 0x00010000 0x0 0x00010000 /* downstream I/O */ @@ -747,7 +742,6 @@ reg-names = "regs", "addr_space"; num-ib-windows = <6>; num-ob-windows = <8>; - num-lanes = <2>; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts index 6f48d21b97c0..41d8b15f25a5 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts @@ -17,6 +17,39 @@ compatible = "fsl,ls1088a-qds", "fsl,ls1088a"; }; +&dspi { + bus-num = <0>; + status = "okay"; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <1000000>; + }; + + flash@1 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + spi-cpol; + spi-cpha; + spi-max-frequency = <3500000>; + reg = <1>; + }; + + flash@2 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + spi-cpol; + spi-cpha; + spi-max-frequency = <3500000>; + reg = <2>; + }; +}; + &i2c0 { status = "okay"; @@ -110,6 +143,30 @@ status = "okay"; }; +&qspi { + status = "okay"; + + s25fs512s0: flash@0 { + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <50000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <1>; + reg = <0>; + }; + + s25fs512s1: flash@1 { + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <50000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <1>; + reg = <1>; + }; +}; + &sata { status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts index 8e925df6c01c..4d77b345cebd 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts @@ -86,6 +86,30 @@ status = "okay"; }; +&qspi { + status = "okay"; + + s25fs512s0: flash@0 { + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <50000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <1>; + reg = <0>; + }; + + s25fs512s1: flash@1 { + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <50000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <1>; + reg = <1>; + }; +}; + &sata { status = "okay"; }; @@ -95,5 +119,6 @@ }; &usb1 { + dr_mode = "otg"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi index dacd8cf03a7f..594566265e3d 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi @@ -252,6 +252,19 @@ #thermal-sensor-cells = <1>; }; + dspi: spi@2100000 { + compatible = "fsl,ls1088a-dspi", + "fsl,ls1021a-v1.0-dspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2100000 0x0 0x10000>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "dspi"; + clocks = <&clockgen 4 1>; + spi-num-chipselects = <6>; + status = "disabled"; + }; + duart0: serial@21c0500 { compatible = "fsl,ns16550", "ns16550a"; reg = <0x0 0x21c0500 0x0 0x100>; @@ -269,9 +282,10 @@ }; gpio0: gpio@2300000 { - compatible = "fsl,qoriq-gpio"; + compatible = "fsl,ls1088a-gpio", "fsl,qoriq-gpio"; reg = <0x0 0x2300000 0x0 0x10000>; interrupts = <0 36 IRQ_TYPE_LEVEL_HIGH>; + little-endian; gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -279,9 +293,10 @@ }; gpio1: gpio@2310000 { - compatible = "fsl,qoriq-gpio"; + compatible = "fsl,ls1088a-gpio", "fsl,qoriq-gpio"; reg = <0x0 0x2310000 0x0 0x10000>; interrupts = <0 36 IRQ_TYPE_LEVEL_HIGH>; + little-endian; gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -289,9 +304,10 @@ }; gpio2: gpio@2320000 { - compatible = "fsl,qoriq-gpio"; + compatible = "fsl,ls1088a-gpio", "fsl,qoriq-gpio"; reg = <0x0 0x2320000 0x0 0x10000>; interrupts = <0 37 IRQ_TYPE_LEVEL_HIGH>; + little-endian; gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -299,9 +315,10 @@ }; gpio3: gpio@2330000 { - compatible = "fsl,qoriq-gpio"; + compatible = "fsl,ls1088a-gpio", "fsl,qoriq-gpio"; reg = <0x0 0x2330000 0x0 0x10000>; interrupts = <0 37 IRQ_TYPE_LEVEL_HIGH>; + little-endian; gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -324,7 +341,7 @@ #size-cells = <0>; reg = <0x0 0x2000000 0x0 0x10000>; interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 3>; + clocks = <&clockgen 4 7>; status = "disabled"; }; @@ -334,7 +351,7 @@ #size-cells = <0>; reg = <0x0 0x2010000 0x0 0x10000>; interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 3>; + clocks = <&clockgen 4 7>; status = "disabled"; }; @@ -344,7 +361,7 @@ #size-cells = <0>; reg = <0x0 0x2020000 0x0 0x10000>; interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 3>; + clocks = <&clockgen 4 7>; status = "disabled"; }; @@ -354,7 +371,20 @@ #size-cells = <0>; reg = <0x0 0x2030000 0x0 0x10000>; interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 3>; + clocks = <&clockgen 4 7>; + status = "disabled"; + }; + + qspi: spi@20c0000 { + compatible = "fsl,ls2080a-qspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x20c0000 0x0 0x10000>, + <0x0 0x20000000 0x0 0x10000000>; + reg-names = "QuadSPI", "QuadSPI-memory"; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "qspi_en", "qspi"; + clocks = <&clockgen 4 3>, <&clockgen 4 3>; status = "disabled"; }; @@ -452,7 +482,6 @@ #size-cells = <2>; device_type = "pci"; dma-coherent; - num-lanes = <4>; num-viewport = <256>; bus-range = <0x0 0xff>; ranges = <0x81000000 0x0 0x00000000 0x20 0x00010000 0x0 0x00010000 /* downstream I/O */ @@ -478,7 +507,6 @@ #size-cells = <2>; device_type = "pci"; dma-coherent; - num-lanes = <4>; num-viewport = <6>; bus-range = <0x0 0xff>; ranges = <0x81000000 0x0 0x00000000 0x28 0x00010000 0x0 0x00010000 /* downstream I/O */ @@ -504,7 +532,6 @@ #size-cells = <2>; device_type = "pci"; dma-coherent; - num-lanes = <8>; num-viewport = <6>; bus-range = <0x0 0xff>; ranges = <0x81000000 0x0 0x00000000 0x30 0x00010000 0x0 0x00010000 /* downstream I/O */ @@ -609,6 +636,11 @@ <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>; }; + console@8340020 { + compatible = "fsl,dpaa2-console"; + reg = <0x00000000 0x08340020 0 0x2>; + }; + ptp-timer@8b95000 { compatible = "fsl,dpaa2-ptp"; reg = <0x0 0x8b95000 0x0 0x100>; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi index 6fd7f63085c9..d0d670227ae2 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi @@ -108,7 +108,15 @@ }; &qspi { - status = "disabled"; + status = "okay"; + + s25fs512s0: flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + spi-max-frequency = <50000000>; + reg = <0>; + }; }; &sata0 { diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi index 3ace91945b72..f96d06da96be 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi @@ -321,6 +321,11 @@ }; }; + console@8340020 { + compatible = "fsl,dpaa2-console"; + reg = <0x00000000 0x08340020 0 0x2>; + }; + ptp-timer@8b95000 { compatible = "fsl,dpaa2-ptp"; reg = <0x0 0x8b95000 0x0 0x100>; @@ -613,16 +618,16 @@ }; qspi: spi@20c0000 { - status = "disabled"; - compatible = "fsl,ls2080a-qspi", "fsl,ls1021a-qspi"; + compatible = "fsl,ls2080a-qspi"; #address-cells = <1>; #size-cells = <0>; reg = <0x0 0x20c0000 0x0 0x10000>, <0x0 0x20000000 0x0 0x10000000>; reg-names = "QuadSPI", "QuadSPI-memory"; - interrupts = <0 25 0x4>; /* Level high type */ + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clockgen 4 3>, <&clockgen 4 3>; clock-names = "qspi_en", "qspi"; + status = "disabled"; }; pcie1: pcie@3400000 { @@ -634,7 +639,6 @@ #size-cells = <2>; device_type = "pci"; dma-coherent; - num-lanes = <4>; num-viewport = <6>; bus-range = <0x0 0xff>; msi-parent = <&its>; @@ -656,7 +660,6 @@ #size-cells = <2>; device_type = "pci"; dma-coherent; - num-lanes = <4>; num-viewport = <6>; bus-range = <0x0 0xff>; msi-parent = <&its>; @@ -678,7 +681,6 @@ #size-cells = <2>; device_type = "pci"; dma-coherent; - num-lanes = <8>; num-viewport = <256>; bus-range = <0x0 0xff>; msi-parent = <&its>; @@ -700,7 +702,6 @@ #size-cells = <2>; device_type = "pci"; dma-coherent; - num-lanes = <4>; num-viewport = <6>; bus-range = <0x0 0xff>; msi-parent = <&its>; diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi new file mode 100644 index 000000000000..071e21678f77 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi @@ -0,0 +1,127 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// +// Device Tree file for LX2160A-CEx7 +// +// Copyright 2019 SolidRun Ltd. + +/dts-v1/; + +#include "fsl-lx2160a.dtsi" + +/ { + model = "SolidRun LX2160A COM Express Type 7 module"; + compatible = "solidrun,lx2160a-cex7", "fsl,lx2160a"; + + aliases { + crypto = &crypto; + }; + + sb_3v3: regulator-sb3v3 { + compatible = "regulator-fixed"; + regulator-name = "RT7290"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; +}; + +&crypto { + status = "okay"; +}; + +&dpmac17 { + phy-handle = <&rgmii_phy1>; + phy-connection-type = "rgmii-id"; +}; + +&emdio1 { + status = "okay"; + + rgmii_phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + +&esdhc1 { + mmc-hs200-1_8v; + mmc-hs400-1_8v; + bus-width = <8>; + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + i2c-switch@77 { + compatible = "nxp,pca9547"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x77>; + + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + fan-temperature-ctrlr@18 { + compatible = "ti,amc6821"; + reg = <0x18>; + cooling-min-state = <0>; + cooling-max-state = <9>; + #cooling-cells = <2>; + }; + }; + + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + + temperature-sensor@48 { + compatible = "nxp,sa56004"; + reg = <0x48>; + vcc-supply = <&sb_3v3>; + }; + }; + }; +}; + +&i2c2 { + status = "okay"; +}; + +&i2c4 { + status = "okay"; + + rtc@51 { + compatible = "nxp,pcf2129"; + reg = <0x51>; + // IRQ10_B + interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>; + }; +}; + +&fspi { + status = "okay"; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "micron,m25p80"; + m25p,fast-read; + spi-max-frequency = <50000000>; + reg = <0>; + /* The following setting enables 1-1-8 (CMD-ADDR-DATA) mode */ + spi-rx-bus-width = <8>; + spi-tx-bus-width = <1>; + }; +}; + +&usb0 { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-cx.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-cx.dts new file mode 100644 index 000000000000..86a9b771428d --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-cx.dts @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// +// Device Tree file for LX2160A Clearfog CX board +// +// Copyright 2019 SolidRun Ltd. + +/dts-v1/; + +#include "fsl-lx2160a-clearfog-itx.dtsi" + +/ { + model = "SolidRun LX2160A Clearfog CX"; + compatible = "solidrun,clearfog-cx", + "solidrun,lx2160a-cex7", "fsl,lx2160a"; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-itx.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-itx.dtsi new file mode 100644 index 000000000000..f3741a32e868 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-itx.dtsi @@ -0,0 +1,57 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// +// Device Tree file for LX2160A Clearfog ITX board; this contains the +// common parts shared between the Clearfog CX and Honeycomb builds. +// +// Copyright 2019 SolidRun Ltd. + +/dts-v1/; + +#include "fsl-lx2160a-cex7.dtsi" + +/ { + aliases { + serial0 = &uart0; + serial1 = &uart1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&emdio2 { + status = "okay"; +}; + +&esdhc0 { + sd-uhs-sdr104; + sd-uhs-sdr50; + sd-uhs-sdr25; + sd-uhs-sdr12; + status = "okay"; +}; + +&sata0 { + status = "okay"; +}; + +&sata1 { + status = "okay"; +}; + +&sata2 { + status = "okay"; +}; + +&sata3 { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-honeycomb.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-honeycomb.dts new file mode 100644 index 000000000000..fe19f3009ea5 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-honeycomb.dts @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// +// Device Tree file for LX2160A Honeycomb board +// +// Copyright 2019 SolidRun Ltd. + +/dts-v1/; + +#include "fsl-lx2160a-clearfog-itx.dtsi" + +/ { + model = "SolidRun LX2160A Honeycomb"; + compatible = "solidrun,honeycomb", + "solidrun,lx2160a-cex7", "fsl,lx2160a"; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts index c2817b784232..51615de102fe 100644 --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts @@ -35,6 +35,34 @@ status = "okay"; }; +&dpmac17 { + phy-handle = <&rgmii_phy1>; + phy-connection-type = "rgmii-id"; +}; + +&dpmac18 { + phy-handle = <&rgmii_phy2>; + phy-connection-type = "rgmii-id"; +}; + +&emdio1 { + status = "okay"; + + rgmii_phy1: ethernet-phy@1 { + /* AR8035 PHY */ + compatible = "ethernet-phy-id004d.d072"; + reg = <0x1>; + eee-broken-1000t; + }; + + rgmii_phy2: ethernet-phy@2 { + /* AR8035 PHY */ + compatible = "ethernet-phy-id004d.d072"; + reg = <0x2>; + eee-broken-1000t; + }; +}; + &esdhc0 { sd-uhs-sdr104; sd-uhs-sdr50; diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi index e6fdba39453c..e5ee5591e52b 100644 --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi @@ -6,6 +6,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/thermal/thermal.h> /memreserve/ 0x80000000 0x00010000; @@ -20,7 +21,7 @@ #size-cells = <0>; // 8 clusters having 2 Cortex-A72 cores each - cpu@0 { + cpu0: cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a72"; enable-method = "psci"; @@ -33,10 +34,11 @@ i-cache-line-size = <64>; i-cache-sets = <192>; next-level-cache = <&cluster0_l2>; - cpu-idle-states = <&cpu_pw20>; + cpu-idle-states = <&cpu_pw15>; + #cooling-cells = <2>; }; - cpu@1 { + cpu1: cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a72"; enable-method = "psci"; @@ -49,10 +51,11 @@ i-cache-line-size = <64>; i-cache-sets = <192>; next-level-cache = <&cluster0_l2>; - cpu-idle-states = <&cpu_pw20>; + cpu-idle-states = <&cpu_pw15>; + #cooling-cells = <2>; }; - cpu@100 { + cpu100: cpu@100 { device_type = "cpu"; compatible = "arm,cortex-a72"; enable-method = "psci"; @@ -65,10 +68,11 @@ i-cache-line-size = <64>; i-cache-sets = <192>; next-level-cache = <&cluster1_l2>; - cpu-idle-states = <&cpu_pw20>; + cpu-idle-states = <&cpu_pw15>; + #cooling-cells = <2>; }; - cpu@101 { + cpu101: cpu@101 { device_type = "cpu"; compatible = "arm,cortex-a72"; enable-method = "psci"; @@ -81,10 +85,11 @@ i-cache-line-size = <64>; i-cache-sets = <192>; next-level-cache = <&cluster1_l2>; - cpu-idle-states = <&cpu_pw20>; + cpu-idle-states = <&cpu_pw15>; + #cooling-cells = <2>; }; - cpu@200 { + cpu200: cpu@200 { device_type = "cpu"; compatible = "arm,cortex-a72"; enable-method = "psci"; @@ -97,10 +102,11 @@ i-cache-line-size = <64>; i-cache-sets = <192>; next-level-cache = <&cluster2_l2>; - cpu-idle-states = <&cpu_pw20>; + cpu-idle-states = <&cpu_pw15>; + #cooling-cells = <2>; }; - cpu@201 { + cpu201: cpu@201 { device_type = "cpu"; compatible = "arm,cortex-a72"; enable-method = "psci"; @@ -113,10 +119,11 @@ i-cache-line-size = <64>; i-cache-sets = <192>; next-level-cache = <&cluster2_l2>; - cpu-idle-states = <&cpu_pw20>; + cpu-idle-states = <&cpu_pw15>; + #cooling-cells = <2>; }; - cpu@300 { + cpu300: cpu@300 { device_type = "cpu"; compatible = "arm,cortex-a72"; enable-method = "psci"; @@ -129,10 +136,11 @@ i-cache-line-size = <64>; i-cache-sets = <192>; next-level-cache = <&cluster3_l2>; - cpu-idle-states = <&cpu_pw20>; + cpu-idle-states = <&cpu_pw15>; + #cooling-cells = <2>; }; - cpu@301 { + cpu301: cpu@301 { device_type = "cpu"; compatible = "arm,cortex-a72"; enable-method = "psci"; @@ -145,10 +153,11 @@ i-cache-line-size = <64>; i-cache-sets = <192>; next-level-cache = <&cluster3_l2>; - cpu-idle-states = <&cpu_pw20>; + cpu-idle-states = <&cpu_pw15>; + #cooling-cells = <2>; }; - cpu@400 { + cpu400: cpu@400 { device_type = "cpu"; compatible = "arm,cortex-a72"; enable-method = "psci"; @@ -161,10 +170,11 @@ i-cache-line-size = <64>; i-cache-sets = <192>; next-level-cache = <&cluster4_l2>; - cpu-idle-states = <&cpu_pw20>; + cpu-idle-states = <&cpu_pw15>; + #cooling-cells = <2>; }; - cpu@401 { + cpu401: cpu@401 { device_type = "cpu"; compatible = "arm,cortex-a72"; enable-method = "psci"; @@ -177,10 +187,11 @@ i-cache-line-size = <64>; i-cache-sets = <192>; next-level-cache = <&cluster4_l2>; - cpu-idle-states = <&cpu_pw20>; + cpu-idle-states = <&cpu_pw15>; + #cooling-cells = <2>; }; - cpu@500 { + cpu500: cpu@500 { device_type = "cpu"; compatible = "arm,cortex-a72"; enable-method = "psci"; @@ -193,10 +204,11 @@ i-cache-line-size = <64>; i-cache-sets = <192>; next-level-cache = <&cluster5_l2>; - cpu-idle-states = <&cpu_pw20>; + cpu-idle-states = <&cpu_pw15>; + #cooling-cells = <2>; }; - cpu@501 { + cpu501: cpu@501 { device_type = "cpu"; compatible = "arm,cortex-a72"; enable-method = "psci"; @@ -209,10 +221,11 @@ i-cache-line-size = <64>; i-cache-sets = <192>; next-level-cache = <&cluster5_l2>; - cpu-idle-states = <&cpu_pw20>; + cpu-idle-states = <&cpu_pw15>; + #cooling-cells = <2>; }; - cpu@600 { + cpu600: cpu@600 { device_type = "cpu"; compatible = "arm,cortex-a72"; enable-method = "psci"; @@ -225,10 +238,11 @@ i-cache-line-size = <64>; i-cache-sets = <192>; next-level-cache = <&cluster6_l2>; - cpu-idle-states = <&cpu_pw20>; + cpu-idle-states = <&cpu_pw15>; + #cooling-cells = <2>; }; - cpu@601 { + cpu601: cpu@601 { device_type = "cpu"; compatible = "arm,cortex-a72"; enable-method = "psci"; @@ -241,10 +255,11 @@ i-cache-line-size = <64>; i-cache-sets = <192>; next-level-cache = <&cluster6_l2>; - cpu-idle-states = <&cpu_pw20>; + cpu-idle-states = <&cpu_pw15>; + #cooling-cells = <2>; }; - cpu@700 { + cpu700: cpu@700 { device_type = "cpu"; compatible = "arm,cortex-a72"; enable-method = "psci"; @@ -257,10 +272,11 @@ i-cache-line-size = <64>; i-cache-sets = <192>; next-level-cache = <&cluster7_l2>; - cpu-idle-states = <&cpu_pw20>; + cpu-idle-states = <&cpu_pw15>; + #cooling-cells = <2>; }; - cpu@701 { + cpu701: cpu@701 { device_type = "cpu"; compatible = "arm,cortex-a72"; enable-method = "psci"; @@ -273,7 +289,8 @@ i-cache-line-size = <64>; i-cache-sets = <192>; next-level-cache = <&cluster7_l2>; - cpu-idle-states = <&cpu_pw20>; + cpu-idle-states = <&cpu_pw15>; + #cooling-cells = <2>; }; cluster0_l2: l2-cache0 { @@ -340,9 +357,9 @@ cache-level = <2>; }; - cpu_pw20: cpu-pw20 { + cpu_pw15: cpu-pw15 { compatible = "arm,idle-state"; - idle-state-name = "PW20"; + idle-state-name = "PW15"; arm,psci-suspend-param = <0x0>; entry-latency-us = <2000>; exit-latency-us = <2000>; @@ -418,6 +435,51 @@ clock-output-names = "sysclk"; }; + thermal-zones { + core_thermal1: core-thermal1 { + polling-delay-passive = <1000>; + polling-delay = <5000>; + thermal-sensors = <&tmu 0>; + + trips { + core_cluster_alert: core-cluster-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + core_cluster_crit: core-cluster-crit { + temperature = <95000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&core_cluster_alert>; + cooling-device = + <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu100 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu101 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu200 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu201 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu300 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu301 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu400 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu401 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu500 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu501 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu600 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu601 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu700 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu701 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + }; + soc { compatible = "simple-bus"; #address-cells = <2>; @@ -478,6 +540,20 @@ little-endian; }; + tmu: tmu@1f80000 { + compatible = "fsl,qoriq-tmu"; + reg = <0x0 0x1f80000 0x0 0x10000>; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + fsl,tmu-range = <0x800000e6 0x8001017d>; + fsl,tmu-calibration = + /* Calibration data group 1 */ + <0x00000000 0x00000035 + /* Calibration data group 2 */ + 0x00010001 0x00000154>; + little-endian; + #thermal-sensor-cells = <1>; + }; + i2c0: i2c@2000000 { compatible = "fsl,vf610-i2c"; #address-cells = <1>; @@ -485,7 +561,7 @@ reg = <0x0 0x2000000 0x0 0x10000>; interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; clock-names = "i2c"; - clocks = <&clockgen 4 7>; + clocks = <&clockgen 4 15>; scl-gpio = <&gpio2 15 GPIO_ACTIVE_HIGH>; status = "disabled"; }; @@ -497,7 +573,7 @@ reg = <0x0 0x2010000 0x0 0x10000>; interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; clock-names = "i2c"; - clocks = <&clockgen 4 7>; + clocks = <&clockgen 4 15>; status = "disabled"; }; @@ -508,7 +584,7 @@ reg = <0x0 0x2020000 0x0 0x10000>; interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; clock-names = "i2c"; - clocks = <&clockgen 4 7>; + clocks = <&clockgen 4 15>; status = "disabled"; }; @@ -519,7 +595,7 @@ reg = <0x0 0x2030000 0x0 0x10000>; interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; clock-names = "i2c"; - clocks = <&clockgen 4 7>; + clocks = <&clockgen 4 15>; status = "disabled"; }; @@ -530,7 +606,7 @@ reg = <0x0 0x2040000 0x0 0x10000>; interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; clock-names = "i2c"; - clocks = <&clockgen 4 7>; + clocks = <&clockgen 4 15>; scl-gpio = <&gpio2 16 GPIO_ACTIVE_HIGH>; status = "disabled"; }; @@ -542,7 +618,7 @@ reg = <0x0 0x2050000 0x0 0x10000>; interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; clock-names = "i2c"; - clocks = <&clockgen 4 7>; + clocks = <&clockgen 4 15>; status = "disabled"; }; @@ -553,7 +629,7 @@ reg = <0x0 0x2060000 0x0 0x10000>; interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; clock-names = "i2c"; - clocks = <&clockgen 4 7>; + clocks = <&clockgen 4 15>; status = "disabled"; }; @@ -564,7 +640,7 @@ reg = <0x0 0x2070000 0x0 0x10000>; interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; clock-names = "i2c"; - clocks = <&clockgen 4 7>; + clocks = <&clockgen 4 15>; status = "disabled"; }; @@ -586,6 +662,7 @@ reg = <0x0 0x2140000 0x0 0x10000>; interrupts = <0 28 0x4>; /* Level high type */ clocks = <&clockgen 4 1>; + dma-coherent; voltage-ranges = <1800 1800 3300 3300>; sdhci,auto-cmd12; little-endian; @@ -598,6 +675,7 @@ reg = <0x0 0x2150000 0x0 0x10000>; interrupts = <0 63 0x4>; /* Level high type */ clocks = <&clockgen 4 1>; + dma-coherent; voltage-ranges = <1800 1800 3300 3300>; sdhci,auto-cmd12; broken-cd; @@ -848,6 +926,11 @@ dma-coherent; }; + console@8340020 { + compatible = "fsl,dpaa2-console"; + reg = <0x00000000 0x08340020 0 0x2>; + }; + ptp-timer@8b95000 { compatible = "fsl,dpaa2-ptp"; reg = <0x0 0x8b95000 0x0 0x100>; @@ -856,6 +939,27 @@ fsl,extts-fifo; }; + /* WRIOP0: 0x8b8_0000, E-MDIO1: 0x1_6000 */ + emdio1: mdio@8b96000 { + compatible = "fsl,fman-memac-mdio"; + reg = <0x0 0x8b96000 0x0 0x1000>; + interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + little-endian; + status = "disabled"; + }; + + emdio2: mdio@8b97000 { + compatible = "fsl,fman-memac-mdio"; + reg = <0x0 0x8b97000 0x0 0x1000>; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; + little-endian; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + fsl_mc: fsl-mc@80c000000 { compatible = "fsl,qoriq-mc"; reg = <0x00000008 0x0c000000 0 0x40>, diff --git a/arch/arm64/boot/dts/freescale/imx8mm-evk.dts b/arch/arm64/boot/dts/freescale/imx8mm-evk.dts index ee7f2b2fc1ff..9e54747cf4e6 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-evk.dts @@ -5,6 +5,7 @@ /dts-v1/; +#include <dt-bindings/usb/pd.h> #include "imx8mm.dtsi" / { @@ -15,6 +16,11 @@ stdout-path = &uart2; }; + memory@40000000 { + device_type = "memory"; + reg = <0x0 0x40000000 0 0x80000000>; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -61,6 +67,8 @@ cpudai: simple-audio-card,cpu { sound-dai = <&sai3>; + dai-tdm-slot-num = <2>; + dai-tdm-slot-width = <32>; }; simple-audio-card,codec { @@ -74,6 +82,26 @@ cpu-supply = <&buck2_reg>; }; +&ddrc { + operating-points-v2 = <&ddrc_opp_table>; + + ddrc_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-25M { + opp-hz = /bits/ 64 <25000000>; + }; + + opp-100M { + opp-hz = /bits/ 64 <100000000>; + }; + + opp-750M { + opp-hz = /bits/ 64 <750000000>; + }; + }; +}; + &fec1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_fec1>; @@ -89,60 +117,10 @@ ethphy0: ethernet-phy@0 { compatible = "ethernet-phy-ieee802.3-c22"; reg = <0>; - at803x,led-act-blind-workaround; - at803x,eee-okay; - at803x,vddio-1p8v; }; }; }; -&sai3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_sai3>; - assigned-clocks = <&clk IMX8MM_CLK_SAI3>; - assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>; - assigned-clock-rates = <24576000>; - status = "okay"; -}; - -&snvs_pwrkey { - status = "okay"; -}; - -&uart2 { /* console */ - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart2>; - status = "okay"; -}; - -&usdhc2 { - pinctrl-names = "default", "state_100mhz", "state_200mhz"; - pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; - pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; - pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; - cd-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; - bus-width = <4>; - vmmc-supply = <®_usdhc2_vmmc>; - status = "okay"; -}; - -&usdhc3 { - pinctrl-names = "default", "state_100mhz", "state_200mhz"; - pinctrl-0 = <&pinctrl_usdhc3>; - pinctrl-1 = <&pinctrl_usdhc3_100mhz>; - pinctrl-2 = <&pinctrl_usdhc3_200mhz>; - bus-width = <8>; - non-removable; - status = "okay"; -}; - -&wdog1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_wdog>; - fsl,ext-reset-output; - status = "okay"; -}; - &i2c1 { clock-frequency = <400000>; pinctrl-names = "default"; @@ -257,6 +235,122 @@ }; }; +&i2c2 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + ptn5110: tcpc@50 { + compatible = "nxp,ptn5110"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_typec1>; + reg = <0x50>; + interrupt-parent = <&gpio2>; + interrupts = <11 8>; + status = "okay"; + + port { + typec1_dr_sw: endpoint { + remote-endpoint = <&usb1_drd_sw>; + }; + }; + + typec1_con: connector { + compatible = "usb-c-connector"; + label = "USB-C"; + power-role = "dual"; + data-role = "dual"; + try-power-role = "sink"; + source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>; + sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM) + PDO_VAR(5000, 20000, 3000)>; + op-sink-microwatt = <15000000>; + self-powered; + }; + }; +}; + +&i2c3 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + pca6416: gpio@20 { + compatible = "ti,tca6416"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + }; +}; + +&sai3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai3>; + assigned-clocks = <&clk IMX8MM_CLK_SAI3>; + assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>; + assigned-clock-rates = <24576000>; + status = "okay"; +}; + +&snvs_pwrkey { + status = "okay"; +}; + +&uart2 { /* console */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&usbotg1 { + dr_mode = "otg"; + hnp-disable; + srp-disable; + adp-disable; + usb-role-switch; + status = "okay"; + + port { + usb1_drd_sw: endpoint { + remote-endpoint = <&typec1_dr_sw>; + }; + }; +}; + +&usdhc2 { + assigned-clocks = <&clk IMX8MM_CLK_USDHC2>; + assigned-clock-rates = <200000000>; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; + cd-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; + bus-width = <4>; + vmmc-supply = <®_usdhc2_vmmc>; + status = "okay"; +}; + +&usdhc3 { + assigned-clocks = <&clk IMX8MM_CLK_USDHC3_ROOT>; + assigned-clock-rates = <400000000>; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; + &iomuxc { pinctrl-names = "default"; @@ -299,6 +393,20 @@ >; }; + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL 0x400001c3 + MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA 0x400001c3 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL 0x400001c3 + MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA 0x400001c3 + >; + }; + pinctrl_pmic: pmicirq { fsl,pins = < MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x41 @@ -320,6 +428,12 @@ >; }; + pinctrl_typec1: typec1grp { + fsl,pins = < + MX8MM_IOMUXC_SD1_STROBE_GPIO2_IO11 0x159 + >; + }; + pinctrl_uart2: uart2grp { fsl,pins = < MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX 0x140 diff --git a/arch/arm64/boot/dts/freescale/imx8mm-pinfunc.h b/arch/arm64/boot/dts/freescale/imx8mm-pinfunc.h index cffa8991880d..5ccc4cc91959 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-pinfunc.h +++ b/arch/arm64/boot/dts/freescale/imx8mm-pinfunc.h @@ -430,18 +430,26 @@ #define MX8MM_IOMUXC_SAI1_MCLK_SIM_M_HRESP 0x1AC 0x414 0x000 0x7 0x0 #define MX8MM_IOMUXC_SAI2_RXFS_SAI2_RX_SYNC 0x1B0 0x418 0x000 0x0 0x0 #define MX8MM_IOMUXC_SAI2_RXFS_SAI5_TX_SYNC 0x1B0 0x418 0x4EC 0x1 0x2 +#define MX8MM_IOMUXC_SAI2_RXFS_UART1_DCE_TX 0x1B0 0x418 0x000 0x4 0x0 +#define MX8MM_IOMUXC_SAI2_RXFS_UART1_DTE_RX 0x1B0 0x418 0x4F4 0x4 0x2 #define MX8MM_IOMUXC_SAI2_RXFS_GPIO4_IO21 0x1B0 0x418 0x000 0x5 0x0 #define MX8MM_IOMUXC_SAI2_RXFS_SIM_M_HSIZE0 0x1B0 0x418 0x000 0x7 0x0 #define MX8MM_IOMUXC_SAI2_RXC_SAI2_RX_BCLK 0x1B4 0x41C 0x000 0x0 0x0 #define MX8MM_IOMUXC_SAI2_RXC_SAI5_TX_BCLK 0x1B4 0x41C 0x4E8 0x1 0x2 +#define MX8MM_IOMUXC_SAI2_RXC_UART1_DCE_RX 0x1B4 0x41C 0x4F4 0x4 0x3 +#define MX8MM_IOMUXC_SAI2_RXC_UART1_DTE_TX 0x1B4 0x41C 0x000 0x4 0x0 #define MX8MM_IOMUXC_SAI2_RXC_GPIO4_IO22 0x1B4 0x41C 0x000 0x5 0x0 #define MX8MM_IOMUXC_SAI2_RXC_SIM_M_HSIZE1 0x1B4 0x41C 0x000 0x7 0x0 #define MX8MM_IOMUXC_SAI2_RXD0_SAI2_RX_DATA0 0x1B8 0x420 0x000 0x0 0x0 #define MX8MM_IOMUXC_SAI2_RXD0_SAI5_TX_DATA0 0x1B8 0x420 0x000 0x1 0x0 +#define MX8MM_IOMUXC_SAI2_RXD0_UART1_DCE_RTS_B 0x1B8 0x420 0x4F0 0x4 0x2 +#define MX8MM_IOMUXC_SAI2_RXD0_UART1_DTE_CTS_B 0x1B8 0x420 0x000 0x4 0x0 #define MX8MM_IOMUXC_SAI2_RXD0_GPIO4_IO23 0x1B8 0x420 0x000 0x5 0x0 #define MX8MM_IOMUXC_SAI2_RXD0_SIM_M_HSIZE2 0x1B8 0x420 0x000 0x7 0x0 #define MX8MM_IOMUXC_SAI2_TXFS_SAI2_TX_SYNC 0x1BC 0x424 0x000 0x0 0x0 #define MX8MM_IOMUXC_SAI2_TXFS_SAI5_TX_DATA1 0x1BC 0x424 0x000 0x1 0x0 +#define MX8MM_IOMUXC_SAI2_TXFS_UART1_DCE_CTS_B 0x1BC 0x424 0x000 0x4 0x0 +#define MX8MM_IOMUXC_SAI2_TXFS_UART1_DTE_RTS_B 0x1BC 0x424 0x4F0 0x4 0x3 #define MX8MM_IOMUXC_SAI2_TXFS_GPIO4_IO24 0x1BC 0x424 0x000 0x5 0x0 #define MX8MM_IOMUXC_SAI2_TXFS_SIM_M_HWRITE 0x1BC 0x424 0x000 0x7 0x0 #define MX8MM_IOMUXC_SAI2_TXC_SAI2_TX_BCLK 0x1C0 0x428 0x000 0x0 0x0 @@ -464,21 +472,29 @@ #define MX8MM_IOMUXC_SAI3_RXC_SAI3_RX_BCLK 0x1D0 0x438 0x000 0x0 0x0 #define MX8MM_IOMUXC_SAI3_RXC_GPT1_CLK 0x1D0 0x438 0x000 0x1 0x0 #define MX8MM_IOMUXC_SAI3_RXC_SAI5_RX_BCLK 0x1D0 0x438 0x4D0 0x2 0x2 +#define MX8MM_IOMUXC_SAI3_RXC_UART2_DCE_CTS_B 0x1D0 0x438 0x000 0x4 0x0 +#define MX8MM_IOMUXC_SAI3_RXC_UART2_DTE_RTS_B 0x1D0 0x438 0x4F8 0x4 0x2 #define MX8MM_IOMUXC_SAI3_RXC_GPIO4_IO29 0x1D0 0x438 0x000 0x5 0x0 #define MX8MM_IOMUXC_SAI3_RXC_TPSMP_HTRANS1 0x1D0 0x438 0x000 0x7 0x0 #define MX8MM_IOMUXC_SAI3_RXD_SAI3_RX_DATA0 0x1D4 0x43C 0x000 0x0 0x0 #define MX8MM_IOMUXC_SAI3_RXD_GPT1_COMPARE1 0x1D4 0x43C 0x000 0x1 0x0 #define MX8MM_IOMUXC_SAI3_RXD_SAI5_RX_DATA0 0x1D4 0x43C 0x4D4 0x2 0x2 +#define MX8MM_IOMUXC_SAI3_RXD_UART2_DCE_RTS_B 0x1D4 0x43C 0x4F8 0x4 0x3 +#define MX8MM_IOMUXC_SAI3_RXD_UART2_DTE_CTS_B 0x1D4 0x43C 0x000 0x4 0x0 #define MX8MM_IOMUXC_SAI3_RXD_GPIO4_IO30 0x1D4 0x43C 0x000 0x5 0x0 #define MX8MM_IOMUXC_SAI3_RXD_TPSMP_HDATA0 0x1D4 0x43C 0x000 0x7 0x0 #define MX8MM_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC 0x1D8 0x440 0x000 0x0 0x0 #define MX8MM_IOMUXC_SAI3_TXFS_GPT1_CAPTURE2 0x1D8 0x440 0x000 0x1 0x0 #define MX8MM_IOMUXC_SAI3_TXFS_SAI5_RX_DATA1 0x1D8 0x440 0x4D8 0x2 0x2 +#define MX8MM_IOMUXC_SAI3_TXFS_UART2_DCE_RX 0x1D8 0x440 0x4Fc 0x4 0x2 +#define MX8MM_IOMUXC_SAI3_TXFS_UART2_DTE_TX 0x1D8 0x440 0x000 0x4 0x0 #define MX8MM_IOMUXC_SAI3_TXFS_GPIO4_IO31 0x1D8 0x440 0x000 0x5 0x0 #define MX8MM_IOMUXC_SAI3_TXFS_TPSMP_HDATA1 0x1D8 0x440 0x000 0x7 0x0 #define MX8MM_IOMUXC_SAI3_TXC_SAI3_TX_BCLK 0x1DC 0x444 0x000 0x0 0x0 #define MX8MM_IOMUXC_SAI3_TXC_GPT1_COMPARE2 0x1DC 0x444 0x000 0x1 0x0 #define MX8MM_IOMUXC_SAI3_TXC_SAI5_RX_DATA2 0x1DC 0x444 0x4DC 0x2 0x2 +#define MX8MM_IOMUXC_SAI3_TXC_UART2_DCE_TX 0x1DC 0x444 0x000 0x4 0x0 +#define MX8MM_IOMUXC_SAI3_TXC_UART2_DTE_RX 0x1DC 0x444 0x4Fc 0x4 0x3 #define MX8MM_IOMUXC_SAI3_TXC_GPIO5_IO0 0x1DC 0x444 0x000 0x5 0x0 #define MX8MM_IOMUXC_SAI3_TXC_TPSMP_HDATA2 0x1DC 0x444 0x000 0x7 0x0 #define MX8MM_IOMUXC_SAI3_TXD_SAI3_TX_DATA0 0x1E0 0x448 0x000 0x0 0x0 diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi index 232a7412755a..1e5e11592f7b 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi @@ -12,7 +12,6 @@ #include "imx8mm-pinfunc.h" / { - compatible = "fsl,imx8mm"; interrupt-parent = <&gic>; #address-cells = <2>; #size-cells = <2>; @@ -44,6 +43,19 @@ #address-cells = <1>; #size-cells = <0>; + idle-states { + entry-method = "psci"; + + cpu_pd_wait: cpu-pd-wait { + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x0010033>; + local-timer-stop; + entry-latency-us = <1000>; + exit-latency-us = <700>; + min-residency-us = <2700>; + }; + }; + A53_0: cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a53"; @@ -55,6 +67,7 @@ operating-points-v2 = <&a53_opp_table>; nvmem-cells = <&cpu_speed_grade>; nvmem-cell-names = "speed_grade"; + cpu-idle-states = <&cpu_pd_wait>; }; A53_1: cpu@1 { @@ -66,6 +79,7 @@ enable-method = "psci"; next-level-cache = <&A53_L2>; operating-points-v2 = <&a53_opp_table>; + cpu-idle-states = <&cpu_pd_wait>; }; A53_2: cpu@2 { @@ -77,6 +91,7 @@ enable-method = "psci"; next-level-cache = <&A53_L2>; operating-points-v2 = <&a53_opp_table>; + cpu-idle-states = <&cpu_pd_wait>; }; A53_3: cpu@3 { @@ -88,6 +103,7 @@ enable-method = "psci"; next-level-cache = <&A53_L2>; operating-points-v2 = <&a53_opp_table>; + cpu-idle-states = <&cpu_pd_wait>; }; A53_L2: l2-cache0 { @@ -104,6 +120,7 @@ opp-microvolt = <850000>; opp-supported-hw = <0xe>, <0x7>; clock-latency-ns = <150000>; + opp-suspend; }; opp-1600000000 { @@ -111,22 +128,18 @@ opp-microvolt = <900000>; opp-supported-hw = <0xc>, <0x7>; clock-latency-ns = <150000>; + opp-suspend; }; opp-1800000000 { opp-hz = /bits/ 64 <1800000000>; opp-microvolt = <1000000>; - /* Consumer only but rely on speed grading */ - opp-supported-hw = <0x8>, <0x7>; + opp-supported-hw = <0x8>, <0x3>; clock-latency-ns = <150000>; + opp-suspend; }; }; - memory@40000000 { - device_type = "memory"; - reg = <0x0 0x40000000 0 0x80000000>; - }; - osc_32k: clock-osc-32k { compatible = "fixed-clock"; #clock-cells = <0>; @@ -214,7 +227,7 @@ ranges = <0x0 0x0 0x0 0x3e000000>; aips1: bus@30000000 { - compatible = "fsl,aips-bus", "simple-bus"; + compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x30000000 0x30000000 0x400000>; @@ -295,6 +308,7 @@ #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; + gpio-ranges = <&iomuxc 0 10 30>; }; gpio2: gpio@30210000 { @@ -307,6 +321,7 @@ #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; + gpio-ranges = <&iomuxc 0 40 21>; }; gpio3: gpio@30220000 { @@ -319,6 +334,7 @@ #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; + gpio-ranges = <&iomuxc 0 61 26>; }; gpio4: gpio@30230000 { @@ -331,6 +347,7 @@ #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; + gpio-ranges = <&iomuxc 0 87 32>; }; gpio5: gpio@30240000 { @@ -343,6 +360,7 @@ #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; + gpio-ranges = <&iomuxc 0 119 30>; }; wdog1: watchdog@30280000 { @@ -370,7 +388,7 @@ }; sdma2: dma-controller@302c0000 { - compatible = "fsl,imx8mm-sdma", "fsl,imx7d-sdma"; + compatible = "fsl,imx8mm-sdma", "fsl,imx8mq-sdma"; reg = <0x302c0000 0x10000>; interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk IMX8MM_CLK_SDMA2_ROOT>, @@ -381,7 +399,7 @@ }; sdma3: dma-controller@302b0000 { - compatible = "fsl,imx8mm-sdma", "fsl,imx7d-sdma"; + compatible = "fsl,imx8mm-sdma", "fsl,imx8mq-sdma"; reg = <0x302b0000 0x10000>; interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk IMX8MM_CLK_SDMA3_ROOT>, @@ -402,7 +420,7 @@ }; ocotp: ocotp-ctrl@30350000 { - compatible = "fsl,imx8mm-ocotp", "fsl,imx7d-ocotp", "syscon"; + compatible = "fsl,imx8mm-ocotp", "syscon"; reg = <0x30350000 0x10000>; clocks = <&clk IMX8MM_CLK_OCOTP_ROOT>; /* For nvmem subnodes */ @@ -415,7 +433,7 @@ }; anatop: anatop@30360000 { - compatible = "fsl,imx8mm-anatop", "syscon", "simple-bus"; + compatible = "fsl,imx8mm-anatop", "syscon"; reg = <0x30360000 0x10000>; }; @@ -451,10 +469,26 @@ <&clk_ext3>, <&clk_ext4>; clock-names = "osc_32k", "osc_24m", "clk_ext1", "clk_ext2", "clk_ext3", "clk_ext4"; + assigned-clocks = <&clk IMX8MM_CLK_NOC>, + <&clk IMX8MM_CLK_AUDIO_AHB>, + <&clk IMX8MM_CLK_IPG_AUDIO_ROOT>, + <&clk IMX8MM_SYS_PLL3>, + <&clk IMX8MM_VIDEO_PLL1>, + <&clk IMX8MM_AUDIO_PLL1>, + <&clk IMX8MM_AUDIO_PLL2>; + assigned-clock-parents = <&clk IMX8MM_SYS_PLL3_OUT>, + <&clk IMX8MM_SYS_PLL1_800M>; + assigned-clock-rates = <0>, + <400000000>, + <400000000>, + <750000000>, + <594000000>, + <393216000>, + <361267200>; }; src: reset-controller@30390000 { - compatible = "fsl,imx8mm-src", "syscon"; + compatible = "fsl,imx8mm-src", "fsl,imx8mq-src", "syscon"; reg = <0x30390000 0x10000>; interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; #reset-cells = <1>; @@ -462,7 +496,7 @@ }; aips2: bus@30400000 { - compatible = "fsl,aips-bus", "simple-bus"; + compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x30400000 0x30400000 0x400000>; @@ -510,10 +544,18 @@ #pwm-cells = <2>; status = "disabled"; }; + + system_counter: timer@306a0000 { + compatible = "nxp,sysctr-timer"; + reg = <0x306a0000 0x20000>; + interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&osc_24m>; + clock-names = "per"; + }; }; aips3: bus@30800000 { - compatible = "fsl,aips-bus", "simple-bus"; + compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x30800000 0x30800000 0x400000>; @@ -594,6 +636,36 @@ status = "disabled"; }; + crypto: crypto@30900000 { + compatible = "fsl,sec-v4.0"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x30900000 0x40000>; + ranges = <0 0x30900000 0x40000>; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_AHB>, + <&clk IMX8MM_CLK_IPG_ROOT>; + clock-names = "aclk", "ipg"; + + sec_jr0: jr@1000 { + compatible = "fsl,sec-v4.0-job-ring"; + reg = <0x1000 0x1000>; + interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; + }; + + sec_jr1: jr@2000 { + compatible = "fsl,sec-v4.0-job-ring"; + reg = <0x2000 0x1000>; + interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; + }; + + sec_jr2: jr@3000 { + compatible = "fsl,sec-v4.0-job-ring"; + reg = <0x3000 0x1000>; + interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + i2c1: i2c@30a20000 { compatible = "fsl,imx8mm-i2c", "fsl,imx21-i2c"; #address-cells = <1>; @@ -650,12 +722,10 @@ compatible = "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc"; reg = <0x30b40000 0x10000>; interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX8MM_CLK_DUMMY>, + clocks = <&clk IMX8MM_CLK_IPG_ROOT>, <&clk IMX8MM_CLK_NAND_USDHC_BUS>, <&clk IMX8MM_CLK_USDHC1_ROOT>; clock-names = "ipg", "ahb", "per"; - assigned-clocks = <&clk IMX8MM_CLK_USDHC1>; - assigned-clock-rates = <400000000>; fsl,tuning-start-tap = <20>; fsl,tuning-step= <2>; bus-width = <4>; @@ -666,7 +736,7 @@ compatible = "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc"; reg = <0x30b50000 0x10000>; interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX8MM_CLK_DUMMY>, + clocks = <&clk IMX8MM_CLK_IPG_ROOT>, <&clk IMX8MM_CLK_NAND_USDHC_BUS>, <&clk IMX8MM_CLK_USDHC2_ROOT>; clock-names = "ipg", "ahb", "per"; @@ -680,12 +750,10 @@ compatible = "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc"; reg = <0x30b60000 0x10000>; interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX8MM_CLK_DUMMY>, + clocks = <&clk IMX8MM_CLK_IPG_ROOT>, <&clk IMX8MM_CLK_NAND_USDHC_BUS>, <&clk IMX8MM_CLK_USDHC3_ROOT>; clock-names = "ipg", "ahb", "per"; - assigned-clocks = <&clk IMX8MM_CLK_USDHC3_ROOT>; - assigned-clock-rates = <400000000>; fsl,tuning-start-tap = <20>; fsl,tuning-step= <2>; bus-width = <4>; @@ -693,11 +761,11 @@ }; sdma1: dma-controller@30bd0000 { - compatible = "fsl,imx8mm-sdma", "fsl,imx7d-sdma"; + compatible = "fsl,imx8mm-sdma", "fsl,imx8mq-sdma"; reg = <0x30bd0000 0x10000>; interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk IMX8MM_CLK_SDMA1_ROOT>, - <&clk IMX8MM_CLK_SDMA1_ROOT>; + <&clk IMX8MM_CLK_AHB>; clock-names = "ipg", "ahb"; #dma-cells = <3>; fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin"; @@ -732,7 +800,7 @@ }; aips4: bus@32c00000 { - compatible = "fsl,aips-bus", "simple-bus"; + compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x32c00000 0x32c00000 0x400000>; @@ -743,10 +811,8 @@ interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk IMX8MM_CLK_USB1_CTRL_ROOT>; clock-names = "usb1_ctrl_root_clk"; - assigned-clocks = <&clk IMX8MM_CLK_USB_BUS>, - <&clk IMX8MM_CLK_USB_CORE_REF>; - assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>, - <&clk IMX8MM_SYS_PLL1_100M>; + assigned-clocks = <&clk IMX8MM_CLK_USB_BUS>; + assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>; fsl,usbphy = <&usbphynop1>; fsl,usbmisc = <&usbmisc1 0>; status = "disabled"; @@ -764,10 +830,8 @@ interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk IMX8MM_CLK_USB1_CTRL_ROOT>; clock-names = "usb1_ctrl_root_clk"; - assigned-clocks = <&clk IMX8MM_CLK_USB_BUS>, - <&clk IMX8MM_CLK_USB_CORE_REF>; - assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>, - <&clk IMX8MM_SYS_PLL1_100M>; + assigned-clocks = <&clk IMX8MM_CLK_USB_BUS>; + assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>; fsl,usbphy = <&usbphynop2>; fsl,usbmisc = <&usbmisc2 0>; status = "disabled"; @@ -818,5 +882,22 @@ interrupt-controller; interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; }; + + ddrc: memory-controller@3d400000 { + compatible = "fsl,imx8mm-ddrc", "fsl,imx8m-ddrc"; + reg = <0x3d400000 0x400000>; + clock-names = "core", "pll", "alt", "apb"; + clocks = <&clk IMX8MM_CLK_DRAM_CORE>, + <&clk IMX8MM_DRAM_PLL>, + <&clk IMX8MM_CLK_DRAM_ALT>, + <&clk IMX8MM_CLK_DRAM_APB>; + }; + + ddr-pmu@3d800000 { + compatible = "fsl,imx8mm-ddr-pmu", "fsl,imx8m-ddr-pmu"; + reg = <0x3d800000 0x400000>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + }; }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts b/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts new file mode 100644 index 000000000000..2497eebb5739 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts @@ -0,0 +1,151 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2019 NXP + */ + +/dts-v1/; + +#include "imx8mn.dtsi" +#include "imx8mn-evk.dtsi" + +/ { + model = "NXP i.MX8MNano DDR4 EVK board"; + compatible = "fsl,imx8mn-ddr4-evk", "fsl,imx8mn"; +}; + +&A53_0 { + cpu-supply = <&buck2_reg>; +}; + +&ddrc { + operating-points-v2 = <&ddrc_opp_table>; + + ddrc_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-25M { + opp-hz = /bits/ 64 <25000000>; + }; + + opp-100M { + opp-hz = /bits/ 64 <100000000>; + }; + + opp-600M { + opp-hz = /bits/ 64 <600000000>; + }; + }; +}; + +&i2c1 { + pmic@4b { + compatible = "rohm,bd71847"; + reg = <0x4b>; + pinctrl-0 = <&pinctrl_pmic>; + interrupt-parent = <&gpio1>; + interrupts = <3 GPIO_ACTIVE_LOW>; + rohm,reset-snvs-powered; + + regulators { + buck1_reg: BUCK1 { + regulator-name = "BUCK1"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1300000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <1250>; + }; + + buck2_reg: BUCK2 { + regulator-name = "BUCK2"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1300000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <1250>; + }; + + buck3_reg: BUCK3 { + // BUCK5 in datasheet + regulator-name = "BUCK3"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1350000>; + }; + + buck4_reg: BUCK4 { + // BUCK6 in datasheet + regulator-name = "BUCK4"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + buck5_reg: BUCK5 { + // BUCK7 in datasheet + regulator-name = "BUCK5"; + regulator-min-microvolt = <1605000>; + regulator-max-microvolt = <1995000>; + regulator-boot-on; + regulator-always-on; + }; + + buck6_reg: BUCK6 { + // BUCK8 in datasheet + regulator-name = "BUCK6"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1_reg: LDO1 { + regulator-name = "LDO1"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo2_reg: LDO2 { + regulator-name = "LDO2"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo3_reg: LDO3 { + regulator-name = "LDO3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo4_reg: LDO4 { + regulator-name = "LDO4"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo6_reg: LDO6 { + regulator-name = "LDO6"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; +}; + +&iomuxc { + pinctrl_pmic: pmicirq { + fsl,pins = < + MX8MN_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x41 + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mn-evk.dts b/arch/arm64/boot/dts/freescale/imx8mn-evk.dts new file mode 100644 index 000000000000..61f351958618 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mn-evk.dts @@ -0,0 +1,30 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2019 NXP + */ + +/dts-v1/; + +#include "imx8mn.dtsi" +#include "imx8mn-evk.dtsi" + +/ { + model = "NXP i.MX8MNano EVK board"; + compatible = "fsl,imx8mn-evk", "fsl,imx8mn"; +}; + +&A53_0 { + /delete-property/operating-points-v2; +}; + +&A53_1 { + /delete-property/operating-points-v2; +}; + +&A53_2 { + /delete-property/operating-points-v2; +}; + +&A53_3 { + /delete-property/operating-points-v2; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi new file mode 100644 index 000000000000..0d2ec4a2c7f2 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi @@ -0,0 +1,319 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2019 NXP + */ + +#include <dt-bindings/usb/pd.h> +#include "imx8mn.dtsi" + +/ { + chosen { + stdout-path = &uart2; + }; + + gpio-leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_led>; + + status { + label = "yellow:status"; + gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0x0 0x40000000 0 0x80000000>; + }; + + reg_usdhc2_vmmc: regulator-usdhc2 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>; + regulator-name = "VSD_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1>; + phy-mode = "rgmii-id"; + phy-handle = <ðphy0>; + fsl,magic-packet; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + }; + }; +}; + +&i2c1 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; +}; + +&i2c2 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + ptn5110: tcpc@50 { + compatible = "nxp,ptn5110"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_typec1>; + reg = <0x50>; + interrupt-parent = <&gpio2>; + interrupts = <11 IRQ_TYPE_LEVEL_LOW>; + status = "okay"; + + port { + typec1_dr_sw: endpoint { + remote-endpoint = <&usb1_drd_sw>; + }; + }; + + typec1_con: connector { + compatible = "usb-c-connector"; + label = "USB-C"; + power-role = "dual"; + data-role = "dual"; + try-power-role = "sink"; + source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>; + sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM) + PDO_VAR(5000, 20000, 3000)>; + op-sink-microwatt = <15000000>; + self-powered; + }; + }; +}; + +&snvs_pwrkey { + status = "okay"; +}; + +&uart2 { /* console */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&usbotg1 { + dr_mode = "otg"; + hnp-disable; + srp-disable; + adp-disable; + usb-role-switch; + status = "okay"; + + port { + usb1_drd_sw: endpoint { + remote-endpoint = <&typec1_dr_sw>; + }; + }; +}; + +&usdhc2 { + assigned-clocks = <&clk IMX8MN_CLK_USDHC2>; + assigned-clock-rates = <200000000>; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; + cd-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; + bus-width = <4>; + vmmc-supply = <®_usdhc2_vmmc>; + status = "okay"; +}; + +&usdhc3 { + assigned-clocks = <&clk IMX8MN_CLK_USDHC3_ROOT>; + assigned-clock-rates = <400000000>; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + + pinctrl_fec1: fec1grp { + fsl,pins = < + MX8MN_IOMUXC_ENET_MDC_ENET1_MDC 0x3 + MX8MN_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3 + MX8MN_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f + MX8MN_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f + MX8MN_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f + MX8MN_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f + MX8MN_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91 + MX8MN_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91 + MX8MN_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91 + MX8MN_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91 + MX8MN_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f + MX8MN_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91 + MX8MN_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91 + MX8MN_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f + MX8MN_IOMUXC_SAI2_RXC_GPIO4_IO22 0x19 + >; + }; + + pinctrl_gpio_led: gpioledgrp { + fsl,pins = < + MX8MN_IOMUXC_NAND_READY_B_GPIO3_IO16 0x19 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX8MN_IOMUXC_I2C1_SCL_I2C1_SCL 0x400001c3 + MX8MN_IOMUXC_I2C1_SDA_I2C1_SDA 0x400001c3 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX8MN_IOMUXC_I2C2_SCL_I2C2_SCL 0x400001c3 + MX8MN_IOMUXC_I2C2_SDA_I2C2_SDA 0x400001c3 + >; + }; + + pinctrl_reg_usdhc2_vmmc: regusdhc2vmmc { + fsl,pins = < + MX8MN_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x41 + >; + }; + + pinctrl_typec1: typec1grp { + fsl,pins = < + MX8MN_IOMUXC_SD1_STROBE_GPIO2_IO11 0x159 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX8MN_IOMUXC_UART2_RXD_UART2_DCE_RX 0x140 + MX8MN_IOMUXC_UART2_TXD_UART2_DCE_TX 0x140 + >; + }; + + pinctrl_usdhc2_gpio: usdhc2grpgpio { + fsl,pins = < + MX8MN_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x1c4 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK 0x190 + MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d0 + MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d0 + MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0 + MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0 + MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0 + MX8MN_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2grp100mhz { + fsl,pins = < + MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK 0x194 + MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4 + MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4 + MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4 + MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4 + MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4 + MX8MN_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2grp200mhz { + fsl,pins = < + MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK 0x196 + MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d6 + MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d6 + MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d6 + MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d6 + MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d6 + MX8MN_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK 0x40000190 + MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d0 + MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d0 + MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d0 + MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d0 + MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d0 + MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d0 + MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d0 + MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d0 + MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d0 + MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x190 + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3grp100mhz { + fsl,pins = < + MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK 0x40000194 + MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d4 + MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d4 + MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d4 + MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d4 + MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d4 + MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d4 + MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d4 + MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d4 + MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d4 + MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x194 + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3grp200mhz { + fsl,pins = < + MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK 0x40000196 + MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d6 + MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d6 + MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d6 + MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d6 + MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d6 + MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d6 + MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d6 + MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d6 + MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d6 + MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x196 + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX8MN_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6 + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi new file mode 100644 index 000000000000..a44b5438e842 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi @@ -0,0 +1,817 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2019 NXP + */ + +#include <dt-bindings/clock/imx8mn-clock.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> + +#include "imx8mn-pinfunc.h" + +/ { + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + aliases { + ethernet0 = &fec1; + gpio0 = &gpio1; + gpio1 = &gpio2; + gpio2 = &gpio3; + gpio3 = &gpio4; + gpio4 = &gpio5; + i2c0 = &i2c1; + i2c1 = &i2c2; + i2c2 = &i2c3; + i2c3 = &i2c4; + mmc0 = &usdhc1; + mmc1 = &usdhc2; + mmc2 = &usdhc3; + serial0 = &uart1; + serial1 = &uart2; + serial2 = &uart3; + serial3 = &uart4; + spi0 = &ecspi1; + spi1 = &ecspi2; + spi2 = &ecspi3; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + idle-states { + entry-method = "psci"; + + cpu_pd_wait: cpu-pd-wait { + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x0010033>; + local-timer-stop; + entry-latency-us = <1000>; + exit-latency-us = <700>; + min-residency-us = <2700>; + }; + }; + + A53_0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0>; + clock-latency = <61036>; + clocks = <&clk IMX8MN_CLK_ARM>; + enable-method = "psci"; + next-level-cache = <&A53_L2>; + operating-points-v2 = <&a53_opp_table>; + nvmem-cells = <&cpu_speed_grade>; + nvmem-cell-names = "speed_grade"; + cpu-idle-states = <&cpu_pd_wait>; + }; + + A53_1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x1>; + clock-latency = <61036>; + clocks = <&clk IMX8MN_CLK_ARM>; + enable-method = "psci"; + next-level-cache = <&A53_L2>; + operating-points-v2 = <&a53_opp_table>; + cpu-idle-states = <&cpu_pd_wait>; + }; + + A53_2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x2>; + clock-latency = <61036>; + clocks = <&clk IMX8MN_CLK_ARM>; + enable-method = "psci"; + next-level-cache = <&A53_L2>; + operating-points-v2 = <&a53_opp_table>; + cpu-idle-states = <&cpu_pd_wait>; + }; + + A53_3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x3>; + clock-latency = <61036>; + clocks = <&clk IMX8MN_CLK_ARM>; + enable-method = "psci"; + next-level-cache = <&A53_L2>; + operating-points-v2 = <&a53_opp_table>; + cpu-idle-states = <&cpu_pd_wait>; + }; + + A53_L2: l2-cache0 { + compatible = "cache"; + }; + }; + + a53_opp_table: opp-table { + compatible = "operating-points-v2"; + opp-shared; + + opp-1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <850000>; + opp-supported-hw = <0xb00>, <0x7>; + clock-latency-ns = <150000>; + opp-suspend; + }; + + opp-1400000000 { + opp-hz = /bits/ 64 <1400000000>; + opp-microvolt = <950000>; + opp-supported-hw = <0x300>, <0x7>; + clock-latency-ns = <150000>; + opp-suspend; + }; + + opp-1500000000 { + opp-hz = /bits/ 64 <1500000000>; + opp-microvolt = <1000000>; + opp-supported-hw = <0x100>, <0x3>; + clock-latency-ns = <150000>; + opp-suspend; + }; + }; + + osc_32k: clock-osc-32k { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "osc_32k"; + }; + + osc_24m: clock-osc-24m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + clock-output-names = "osc_24m"; + }; + + clk_ext1: clock-ext1 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <133000000>; + clock-output-names = "clk_ext1"; + }; + + clk_ext2: clock-ext2 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <133000000>; + clock-output-names = "clk_ext2"; + }; + + clk_ext3: clock-ext3 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <133000000>; + clock-output-names = "clk_ext3"; + }; + + clk_ext4: clock-ext4 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency= <133000000>; + clock-output-names = "clk_ext4"; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>; + clock-frequency = <8000000>; + arm,no-tick-in-suspend; + }; + + soc@0 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x0 0x3e000000>; + + aips1: bus@30000000 { + compatible = "simple-bus"; + reg = <0x30000000 0x400000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + gpio1: gpio@30200000 { + compatible = "fsl,imx8mn-gpio", "fsl,imx35-gpio"; + reg = <0x30200000 0x10000>; + interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MN_CLK_GPIO1_ROOT>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&iomuxc 0 10 30>; + }; + + gpio2: gpio@30210000 { + compatible = "fsl,imx8mn-gpio", "fsl,imx35-gpio"; + reg = <0x30210000 0x10000>; + interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MN_CLK_GPIO2_ROOT>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&iomuxc 0 40 21>; + }; + + gpio3: gpio@30220000 { + compatible = "fsl,imx8mn-gpio", "fsl,imx35-gpio"; + reg = <0x30220000 0x10000>; + interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MN_CLK_GPIO3_ROOT>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&iomuxc 0 61 26>; + }; + + gpio4: gpio@30230000 { + compatible = "fsl,imx8mn-gpio", "fsl,imx35-gpio"; + reg = <0x30230000 0x10000>; + interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MN_CLK_GPIO4_ROOT>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&iomuxc 21 108 11>; + }; + + gpio5: gpio@30240000 { + compatible = "fsl,imx8mn-gpio", "fsl,imx35-gpio"; + reg = <0x30240000 0x10000>; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MN_CLK_GPIO5_ROOT>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&iomuxc 0 119 30>; + }; + + wdog1: watchdog@30280000 { + compatible = "fsl,imx8mn-wdt", "fsl,imx21-wdt"; + reg = <0x30280000 0x10000>; + interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MN_CLK_WDOG1_ROOT>; + status = "disabled"; + }; + + wdog2: watchdog@30290000 { + compatible = "fsl,imx8mn-wdt", "fsl,imx21-wdt"; + reg = <0x30290000 0x10000>; + interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MN_CLK_WDOG2_ROOT>; + status = "disabled"; + }; + + wdog3: watchdog@302a0000 { + compatible = "fsl,imx8mn-wdt", "fsl,imx21-wdt"; + reg = <0x302a0000 0x10000>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MN_CLK_WDOG3_ROOT>; + status = "disabled"; + }; + + sdma3: dma-controller@302b0000 { + compatible = "fsl,imx8mn-sdma", "fsl,imx8mq-sdma"; + reg = <0x302b0000 0x10000>; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MN_CLK_SDMA3_ROOT>, + <&clk IMX8MN_CLK_SDMA3_ROOT>; + clock-names = "ipg", "ahb"; + #dma-cells = <3>; + fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin"; + }; + + sdma2: dma-controller@302c0000 { + compatible = "fsl,imx8mn-sdma", "fsl,imx8mq-sdma"; + reg = <0x302c0000 0x10000>; + interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MN_CLK_SDMA2_ROOT>, + <&clk IMX8MN_CLK_SDMA2_ROOT>; + clock-names = "ipg", "ahb"; + #dma-cells = <3>; + fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin"; + }; + + iomuxc: pinctrl@30330000 { + compatible = "fsl,imx8mn-iomuxc"; + reg = <0x30330000 0x10000>; + }; + + gpr: iomuxc-gpr@30340000 { + compatible = "fsl,imx8mn-iomuxc-gpr", "syscon"; + reg = <0x30340000 0x10000>; + }; + + ocotp: ocotp-ctrl@30350000 { + compatible = "fsl,imx8mn-ocotp", "fsl,imx8mm-ocotp", "syscon"; + reg = <0x30350000 0x10000>; + clocks = <&clk IMX8MN_CLK_OCOTP_ROOT>; + #address-cells = <1>; + #size-cells = <1>; + + cpu_speed_grade: speed-grade@10 { + reg = <0x10 4>; + }; + }; + + anatop: anatop@30360000 { + compatible = "fsl,imx8mn-anatop", "fsl,imx8mm-anatop", + "syscon"; + reg = <0x30360000 0x10000>; + }; + + snvs: snvs@30370000 { + compatible = "fsl,sec-v4.0-mon","syscon", "simple-mfd"; + reg = <0x30370000 0x10000>; + + snvs_rtc: snvs-rtc-lp { + compatible = "fsl,sec-v4.0-mon-rtc-lp"; + regmap = <&snvs>; + offset = <0x34>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "snvs-rtc"; + }; + + snvs_pwrkey: snvs-powerkey { + compatible = "fsl,sec-v4.0-pwrkey"; + regmap = <&snvs>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + linux,keycode = <KEY_POWER>; + wakeup-source; + status = "disabled"; + }; + }; + + clk: clock-controller@30380000 { + compatible = "fsl,imx8mn-ccm"; + reg = <0x30380000 0x10000>; + #clock-cells = <1>; + clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>, <&clk_ext2>, + <&clk_ext3>, <&clk_ext4>; + clock-names = "osc_32k", "osc_24m", "clk_ext1", "clk_ext2", + "clk_ext3", "clk_ext4"; + }; + + src: reset-controller@30390000 { + compatible = "fsl,imx8mn-src", "fsl,imx8mq-src", "syscon"; + reg = <0x30390000 0x10000>; + interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; + #reset-cells = <1>; + }; + }; + + aips2: bus@30400000 { + compatible = "simple-bus"; + reg = <0x30400000 0x400000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + pwm1: pwm@30660000 { + compatible = "fsl,imx8mn-pwm", "fsl,imx27-pwm"; + reg = <0x30660000 0x10000>; + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MN_CLK_PWM1_ROOT>, + <&clk IMX8MN_CLK_PWM1_ROOT>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm2: pwm@30670000 { + compatible = "fsl,imx8mn-pwm", "fsl,imx27-pwm"; + reg = <0x30670000 0x10000>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MN_CLK_PWM2_ROOT>, + <&clk IMX8MN_CLK_PWM2_ROOT>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm3: pwm@30680000 { + compatible = "fsl,imx8mn-pwm", "fsl,imx27-pwm"; + reg = <0x30680000 0x10000>; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MN_CLK_PWM3_ROOT>, + <&clk IMX8MN_CLK_PWM3_ROOT>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm4: pwm@30690000 { + compatible = "fsl,imx8mn-pwm", "fsl,imx27-pwm"; + reg = <0x30690000 0x10000>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MN_CLK_PWM4_ROOT>, + <&clk IMX8MN_CLK_PWM4_ROOT>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + status = "disabled"; + }; + + system_counter: timer@306a0000 { + compatible = "nxp,sysctr-timer"; + reg = <0x306a0000 0x20000>; + interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&osc_24m>; + clock-names = "per"; + }; + }; + + aips3: bus@30800000 { + compatible = "simple-bus"; + reg = <0x30800000 0x400000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + ecspi1: spi@30820000 { + compatible = "fsl,imx8mn-ecspi", "fsl,imx51-ecspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x30820000 0x10000>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MN_CLK_ECSPI1_ROOT>, + <&clk IMX8MN_CLK_ECSPI1_ROOT>; + clock-names = "ipg", "per"; + dmas = <&sdma1 0 7 1>, <&sdma1 1 7 2>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + ecspi2: spi@30830000 { + compatible = "fsl,imx8mn-ecspi", "fsl,imx51-ecspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x30830000 0x10000>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MN_CLK_ECSPI2_ROOT>, + <&clk IMX8MN_CLK_ECSPI2_ROOT>; + clock-names = "ipg", "per"; + dmas = <&sdma1 2 7 1>, <&sdma1 3 7 2>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + ecspi3: spi@30840000 { + compatible = "fsl,imx8mn-ecspi", "fsl,imx51-ecspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x30840000 0x10000>; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MN_CLK_ECSPI3_ROOT>, + <&clk IMX8MN_CLK_ECSPI3_ROOT>; + clock-names = "ipg", "per"; + dmas = <&sdma1 4 7 1>, <&sdma1 5 7 2>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + uart1: serial@30860000 { + compatible = "fsl,imx8mn-uart", "fsl,imx6q-uart"; + reg = <0x30860000 0x10000>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MN_CLK_UART1_ROOT>, + <&clk IMX8MN_CLK_UART1_ROOT>; + clock-names = "ipg", "per"; + dmas = <&sdma1 22 4 0>, <&sdma1 23 4 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + uart3: serial@30880000 { + compatible = "fsl,imx8mn-uart", "fsl,imx6q-uart"; + reg = <0x30880000 0x10000>; + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MN_CLK_UART3_ROOT>, + <&clk IMX8MN_CLK_UART3_ROOT>; + clock-names = "ipg", "per"; + dmas = <&sdma1 26 4 0>, <&sdma1 27 4 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + uart2: serial@30890000 { + compatible = "fsl,imx8mn-uart", "fsl,imx6q-uart"; + reg = <0x30890000 0x10000>; + interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MN_CLK_UART2_ROOT>, + <&clk IMX8MN_CLK_UART2_ROOT>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + crypto: crypto@30900000 { + compatible = "fsl,sec-v4.0"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x30900000 0x40000>; + ranges = <0 0x30900000 0x40000>; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MN_CLK_AHB>, + <&clk IMX8MN_CLK_IPG_ROOT>; + clock-names = "aclk", "ipg"; + + sec_jr0: jr0@1000 { + compatible = "fsl,sec-v4.0-job-ring"; + reg = <0x1000 0x1000>; + interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; + }; + + sec_jr1: jr1@2000 { + compatible = "fsl,sec-v4.0-job-ring"; + reg = <0x2000 0x1000>; + interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; + }; + + sec_jr2: jr2@3000 { + compatible = "fsl,sec-v4.0-job-ring"; + reg = <0x3000 0x1000>; + interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + i2c1: i2c@30a20000 { + compatible = "fsl,imx8mn-i2c", "fsl,imx21-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x30a20000 0x10000>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MN_CLK_I2C1_ROOT>; + status = "disabled"; + }; + + i2c2: i2c@30a30000 { + compatible = "fsl,imx8mn-i2c", "fsl,imx21-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x30a30000 0x10000>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MN_CLK_I2C2_ROOT>; + status = "disabled"; + }; + + i2c3: i2c@30a40000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx8mn-i2c", "fsl,imx21-i2c"; + reg = <0x30a40000 0x10000>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MN_CLK_I2C3_ROOT>; + status = "disabled"; + }; + + i2c4: i2c@30a50000 { + compatible = "fsl,imx8mn-i2c", "fsl,imx21-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x30a50000 0x10000>; + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MN_CLK_I2C4_ROOT>; + status = "disabled"; + }; + + uart4: serial@30a60000 { + compatible = "fsl,imx8mn-uart", "fsl,imx6q-uart"; + reg = <0x30a60000 0x10000>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MN_CLK_UART4_ROOT>, + <&clk IMX8MN_CLK_UART4_ROOT>; + clock-names = "ipg", "per"; + dmas = <&sdma1 28 4 0>, <&sdma1 29 4 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + usdhc1: mmc@30b40000 { + compatible = "fsl,imx8mn-usdhc", "fsl,imx7d-usdhc"; + reg = <0x30b40000 0x10000>; + interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MN_CLK_IPG_ROOT>, + <&clk IMX8MN_CLK_NAND_USDHC_BUS>, + <&clk IMX8MN_CLK_USDHC1_ROOT>; + clock-names = "ipg", "ahb", "per"; + fsl,tuning-start-tap = <20>; + fsl,tuning-step= <2>; + bus-width = <4>; + status = "disabled"; + }; + + usdhc2: mmc@30b50000 { + compatible = "fsl,imx8mn-usdhc", "fsl,imx7d-usdhc"; + reg = <0x30b50000 0x10000>; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MN_CLK_IPG_ROOT>, + <&clk IMX8MN_CLK_NAND_USDHC_BUS>, + <&clk IMX8MN_CLK_USDHC2_ROOT>; + clock-names = "ipg", "ahb", "per"; + fsl,tuning-start-tap = <20>; + fsl,tuning-step= <2>; + bus-width = <4>; + status = "disabled"; + }; + + usdhc3: mmc@30b60000 { + compatible = "fsl,imx8mn-usdhc", "fsl,imx7d-usdhc"; + reg = <0x30b60000 0x10000>; + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MN_CLK_IPG_ROOT>, + <&clk IMX8MN_CLK_NAND_USDHC_BUS>, + <&clk IMX8MN_CLK_USDHC3_ROOT>; + clock-names = "ipg", "ahb", "per"; + fsl,tuning-start-tap = <20>; + fsl,tuning-step= <2>; + bus-width = <4>; + status = "disabled"; + }; + + sdma1: dma-controller@30bd0000 { + compatible = "fsl,imx8mn-sdma", "fsl,imx8mq-sdma"; + reg = <0x30bd0000 0x10000>; + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MN_CLK_SDMA1_ROOT>, + <&clk IMX8MN_CLK_SDMA1_ROOT>; + clock-names = "ipg", "ahb"; + #dma-cells = <3>; + fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin"; + }; + + fec1: ethernet@30be0000 { + compatible = "fsl,imx8mn-fec", "fsl,imx6sx-fec"; + reg = <0x30be0000 0x10000>; + interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MN_CLK_ENET1_ROOT>, + <&clk IMX8MN_CLK_ENET1_ROOT>, + <&clk IMX8MN_CLK_ENET_TIMER>, + <&clk IMX8MN_CLK_ENET_REF>, + <&clk IMX8MN_CLK_ENET_PHY_REF>; + clock-names = "ipg", "ahb", "ptp", + "enet_clk_ref", "enet_out"; + assigned-clocks = <&clk IMX8MN_CLK_ENET_AXI>, + <&clk IMX8MN_CLK_ENET_TIMER>, + <&clk IMX8MN_CLK_ENET_REF>, + <&clk IMX8MN_CLK_ENET_TIMER>; + assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_266M>, + <&clk IMX8MN_SYS_PLL2_100M>, + <&clk IMX8MN_SYS_PLL2_125M>; + assigned-clock-rates = <0>, <0>, <125000000>, <100000000>; + fsl,num-tx-queues = <3>; + fsl,num-rx-queues = <3>; + status = "disabled"; + }; + + }; + + aips4: bus@32c00000 { + compatible = "simple-bus"; + reg = <0x32c00000 0x400000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + usbotg1: usb@32e40000 { + compatible = "fsl,imx8mn-usb", "fsl,imx7d-usb"; + reg = <0x32e40000 0x200>; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MN_CLK_USB1_CTRL_ROOT>; + clock-names = "usb1_ctrl_root_clk"; + assigned-clocks = <&clk IMX8MN_CLK_USB_BUS>; + assigned-clock-parents = <&clk IMX8MN_SYS_PLL2_500M>; + fsl,usbphy = <&usbphynop1>; + fsl,usbmisc = <&usbmisc1 0>; + status = "disabled"; + }; + + usbmisc1: usbmisc@32e40200 { + compatible = "fsl,imx8mn-usbmisc", "fsl,imx7d-usbmisc"; + #index-cells = <1>; + reg = <0x32e40200 0x200>; + }; + + usbotg2: usb@32e50000 { + compatible = "fsl,imx8mn-usb", "fsl,imx7d-usb"; + reg = <0x32e50000 0x200>; + interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MN_CLK_USB1_CTRL_ROOT>; + clock-names = "usb1_ctrl_root_clk"; + assigned-clocks = <&clk IMX8MN_CLK_USB_BUS>, + <&clk IMX8MN_CLK_USB_CORE_REF>; + assigned-clock-parents = <&clk IMX8MN_SYS_PLL2_500M>, + <&clk IMX8MN_SYS_PLL1_100M>; + fsl,usbphy = <&usbphynop2>; + fsl,usbmisc = <&usbmisc2 0>; + status = "disabled"; + }; + + usbmisc2: usbmisc@32e50200 { + compatible = "fsl,imx8mn-usbmisc", "fsl,imx7d-usbmisc"; + #index-cells = <1>; + reg = <0x32e50200 0x200>; + }; + + }; + + dma_apbh: dma-controller@33000000 { + compatible = "fsl,imx7d-dma-apbh", "fsl,imx28-dma-apbh"; + reg = <0x33000000 0x2000>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3"; + #dma-cells = <1>; + dma-channels = <4>; + clocks = <&clk IMX8MN_CLK_NAND_USDHC_BUS_RAWNAND_CLK>; + }; + + gpmi: nand-controller@33002000 { + compatible = "fsl,imx8mn-gpmi-nand", "fsl,imx7d-gpmi-nand"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x33002000 0x2000>, <0x33004000 0x4000>; + reg-names = "gpmi-nand", "bch"; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "bch"; + clocks = <&clk IMX8MN_CLK_NAND_ROOT>, + <&clk IMX8MN_CLK_NAND_USDHC_BUS_RAWNAND_CLK>; + clock-names = "gpmi_io", "gpmi_bch_apb"; + dmas = <&dma_apbh 0>; + dma-names = "rx-tx"; + status = "disabled"; + }; + + gic: interrupt-controller@38800000 { + compatible = "arm,gic-v3"; + reg = <0x38800000 0x10000>, + <0x38880000 0xc0000>; + #interrupt-cells = <3>; + interrupt-controller; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + }; + + ddrc: memory-controller@3d400000 { + compatible = "fsl,imx8mn-ddrc", "fsl,imx8m-ddrc"; + reg = <0x3d400000 0x400000>; + clock-names = "core", "pll", "alt", "apb"; + clocks = <&clk IMX8MN_CLK_DRAM_CORE>, + <&clk IMX8MN_DRAM_PLL>, + <&clk IMX8MN_CLK_DRAM_ALT>, + <&clk IMX8MN_CLK_DRAM_APB>; + }; + + ddr-pmu@3d800000 { + compatible = "fsl,imx8mn-ddr-pmu", "fsl,imx8m-ddr-pmu"; + reg = <0x3d800000 0x400000>; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + usbphynop1: usbphynop1 { + compatible = "usb-nop-xceiv"; + clocks = <&clk IMX8MN_CLK_USB_PHY_REF>; + assigned-clocks = <&clk IMX8MN_CLK_USB_PHY_REF>; + assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_100M>; + clock-names = "main_clk"; + }; + + usbphynop2: usbphynop2 { + compatible = "usb-nop-xceiv"; + clocks = <&clk IMX8MN_CLK_USB_PHY_REF>; + assigned-clocks = <&clk IMX8MN_CLK_USB_PHY_REF>; + assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_100M>; + clock-names = "main_clk"; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts index e3df9b8cd9ca..94066d49d6ed 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts @@ -48,6 +48,15 @@ gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>; states = <1000000 0x0 900000 0x1>; + regulator-boot-on; + regulator-always-on; + }; + + ir-receiver { + compatible = "gpio-ir-receiver"; + gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ir>; }; wm8524: audio-codec { @@ -96,6 +105,33 @@ cpu-supply = <&buck2_reg>; }; +&ddrc { + operating-points-v2 = <&ddrc_opp_table>; + + ddrc_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-25M { + opp-hz = /bits/ 64 <25000000>; + }; + + opp-100M { + opp-hz = /bits/ 64 <100000000>; + }; + + /* + * On imx8mq B0 PLL can't be bypassed so low bus is 166M + */ + opp-166M { + opp-hz = /bits/ 64 <166935483>; + }; + + opp-800M { + opp-hz = /bits/ 64 <800000000>; + }; + }; +}; + &fec1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_fec1>; @@ -115,15 +151,6 @@ }; }; -&sai2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_sai2>; - assigned-clocks = <&clk IMX8MQ_CLK_SAI2>; - assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1_OUT>; - assigned-clock-rates = <24576000>; - status = "okay"; -}; - &gpio5 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_wifi_reset>; @@ -242,6 +269,29 @@ power-supply = <&sw1a_reg>; }; +&qspi0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_qspi>; + status = "okay"; + + n25q256a: flash@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + compatible = "micron,n25q256a", "jedec,spi-nor"; + spi-max-frequency = <29000000>; + }; +}; + +&sai2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai2>; + assigned-clocks = <&clk IMX8MQ_AUDIO_PLL1_BYPASS>, <&clk IMX8MQ_CLK_SAI2>; + assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1>, <&clk IMX8MQ_AUDIO_PLL1_OUT>; + assigned-clock-rates = <0>, <24576000>; + status = "okay"; +}; + &snvs_pwrkey { status = "okay"; }; @@ -261,21 +311,9 @@ status = "okay"; }; -&qspi0 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_qspi>; - status = "okay"; - - n25q256a: flash@0 { - reg = <0>; - #address-cells = <1>; - #size-cells = <1>; - compatible = "micron,n25q256a", "jedec,spi-nor"; - spi-max-frequency = <29000000>; - }; -}; - &usdhc1 { + assigned-clocks = <&clk IMX8MQ_CLK_USDHC1>; + assigned-clock-rates = <400000000>; pinctrl-names = "default", "state_100mhz", "state_200mhz"; pinctrl-0 = <&pinctrl_usdhc1>; pinctrl-1 = <&pinctrl_usdhc1_100mhz>; @@ -289,6 +327,8 @@ }; &usdhc2 { + assigned-clocks = <&clk IMX8MQ_CLK_USDHC2>; + assigned-clock-rates = <200000000>; pinctrl-names = "default", "state_100mhz", "state_200mhz"; pinctrl-0 = <&pinctrl_usdhc2>; pinctrl-1 = <&pinctrl_usdhc2_100mhz>; @@ -340,6 +380,12 @@ >; }; + pinctrl_ir: irgrp { + fsl,pins = < + MX8MQ_IOMUXC_GPIO1_IO12_GPIO1_IO12 0x4f + >; + }; + pinctrl_pcie0: pcie0grp { fsl,pins = < MX8MQ_IOMUXC_I2C4_SCL_PCIE1_CLKREQ_B 0x76 diff --git a/arch/arm64/boot/dts/freescale/imx8mq-hummingboard-pulse.dts b/arch/arm64/boot/dts/freescale/imx8mq-hummingboard-pulse.dts new file mode 100644 index 000000000000..bfd91c1ed6a5 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mq-hummingboard-pulse.dts @@ -0,0 +1,264 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright (C) 2018 Jon Nettleton <jon@solid-run.com> + */ + +/dts-v1/; + +#include "dt-bindings/usb/pd.h" +#include "imx8mq-sr-som.dtsi" + +/ { + model = "SolidRun i.MX8MQ HummingBoard Pulse"; + compatible = "solidrun,hummingboard-pulse", "fsl,imx8mq"; + + chosen { + stdout-path = &uart1; + }; + + reg_usdhc2_vmmc: regulator-usdhc2-vmmc { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2_vmmc>; + regulator-name = "VSD_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio1 13 GPIO_ACTIVE_LOW>; + }; + + reg_v_5v0: regulator-v-5v0 { + compatible = "regulator-fixed"; + regulator-name = "v_5v0"; + regulator-max-microvolt = <5000000>; + regulator-min-microvolt = <5000000>; + regulator-always-on; + }; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + clock-frequency = <100000>; + status = "okay"; + + typec_ptn5100: usb-typec@50 { + compatible = "nxp,ptn5110"; + reg = <0x50>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_typec>; + interrupt-parent = <&gpio1>; + interrupts = <6 IRQ_TYPE_LEVEL_LOW>; + + connector { + compatible = "usb-c-connector"; + label = "USB-C"; + data-role = "dual"; + power-role = "dual"; + try-power-role = "sink"; + source-pdos = <PDO_FIXED(5000, 2000, + PDO_FIXED_USB_COMM | + PDO_FIXED_SUSPEND | + PDO_FIXED_EXTPOWER)>; + sink-pdos = <PDO_FIXED(5000, 2000, + PDO_FIXED_USB_COMM | + PDO_FIXED_SUSPEND | + PDO_FIXED_EXTPOWER) + PDO_FIXED(9000, 2000, + PDO_FIXED_USB_COMM | + PDO_FIXED_SUSPEND | + PDO_FIXED_EXTPOWER)>; + op-sink-microwatt = <9000000>; + + port { + typec1_dr_sw: endpoint { + remote-endpoint = <&usb1_drd_sw>; + }; + }; + }; + }; +}; + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + clock-frequency = <100000>; + status = "okay"; + + eeprom@57 { + compatible = "atmel,24c02"; + reg = <0x57>; + status = "okay"; + }; + + rtc@69 { + compatible = "abracon,ab1805"; + reg = <0x69>; + abracon,tc-diode = "schottky"; + abracon,tc-resistor = <3>; + }; +}; + +&uart2 { /* J35 header */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + assigned-clocks = <&clk IMX8MQ_CLK_UART2>; + assigned-clock-parents = <&clk IMX8MQ_CLK_25M>; + status = "okay"; +}; + +&uart3 { /* Mikrobus */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + assigned-clocks = <&clk IMX8MQ_CLK_UART3>; + assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_80M>; + uart-has-rtscts; + status = "okay"; +}; + +&usdhc2 { + assigned-clocks = <&clk IMX8MQ_CLK_USDHC2>; + assigned-clock-rates = <200000000>; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; + cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; + vmmc-supply = <®_usdhc2_vmmc>; + status = "okay"; +}; + +&usb_dwc3_0 { + dr_mode = "otg"; + status = "okay"; + + port { + usb1_drd_sw: endpoint { + remote-endpoint = <&typec1_dr_sw>; + }; + }; +}; + +&usb_dwc3_1 { + dr_mode = "host"; + status = "okay"; +}; + +&usb3_phy0 { + status = "okay"; +}; + +&usb3_phy1 { + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + pinctrl_hog: hoggrp { + fsl,pins = < + /* MikroBus Analog */ + MX8MQ_IOMUXC_NAND_DATA05_GPIO3_IO11 0x41 + /* MikroBus Reset */ + MX8MQ_IOMUXC_SAI2_RXD0_GPIO4_IO23 0x41 + /* + * The following 2 pins need to be commented out and + * reconfigured to enable RTS/CTS on UART3 + */ + /* MikroBus PWM */ + MX8MQ_IOMUXC_ECSPI1_MISO_GPIO5_IO8 0x41 + /* MikroBus INT */ + MX8MQ_IOMUXC_ECSPI1_SS0_GPIO5_IO9 0x41 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX8MQ_IOMUXC_I2C2_SCL_I2C2_SCL 0x4000007f + MX8MQ_IOMUXC_I2C2_SDA_I2C2_SDA 0x4000007f + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX8MQ_IOMUXC_I2C3_SCL_I2C3_SCL 0x4000007f + MX8MQ_IOMUXC_I2C3_SDA_I2C3_SDA 0x4000007f + >; + }; + + pinctrl_typec: typecgrp { + fsl,pins = < + MX8MQ_IOMUXC_NAND_RE_B_GPIO3_IO15 0x16 + MX8MQ_IOMUXC_GPIO1_IO06_GPIO1_IO6 0x17059 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX8MQ_IOMUXC_UART2_TXD_UART2_DCE_TX 0x49 + MX8MQ_IOMUXC_UART2_RXD_UART2_DCE_RX 0x49 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX8MQ_IOMUXC_UART3_TXD_UART3_DCE_TX 0x49 + MX8MQ_IOMUXC_UART3_RXD_UART3_DCE_RX 0x49 + /* + * These pins are by default GPIO on the Mikro Bus + * Header. To use RTS/CTS on UART3 comment them out + * of the hoggrp and enable them here + */ + /* MX8MQ_IOMUXC_ECSPI1_MISO_UART3_DCE_CTS_B 0x49 */ + /* MX8MQ_IOMUXC_ECSPI1_SS0_UART3_DCE_RTS_B 0x49 */ + >; + }; + + pinctrl_usdhc2_gpio: usdhc2grpgpio { + fsl,pins = < + MX8MQ_IOMUXC_SD2_CD_B_GPIO2_IO12 0x41 + >; + }; + + pinctrl_usdhc2_vmmc: usdhc2vmmcgpio { + fsl,pins = < + MX8MQ_IOMUXC_GPIO1_IO13_GPIO1_IO13 0x41 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x83 + MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xc3 + MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xc3 + MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xc3 + MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xc3 + MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xc3 + MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xc1 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2grp100mhz { + fsl,pins = < + MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x8d + MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xcd + MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xcd + MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xcd + MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xcd + MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xcd + MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xc1 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2grp200mhz { + fsl,pins = < + MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x9f + MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xdf + MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xdf + MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xdf + MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xdf + MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xdf + MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xc1 + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts index 5179e22f5126..764a4cb4e125 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts +++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts @@ -174,6 +174,10 @@ assigned-clock-rates = <786432000>, <722534400>; }; +&dphy { + status = "okay"; +}; + &fec1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_fec1>; @@ -417,7 +421,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_imu>; interrupt-parent = <&gpio3>; - interrupts = <19 IRQ_TYPE_LEVEL_LOW>; + interrupts = <19 IRQ_TYPE_LEVEL_HIGH>; vdd-supply = <®_3v3_p>; vddio-supply = <®_3v3_p>; }; @@ -436,6 +440,13 @@ AVDD28-supply = <®_2v8_p>; VDDIO-supply = <®_1v8_p>; }; + + accel-gyro@6a { + compatible = "st,lsm9ds1-imu"; + reg = <0x6a>; + vdd-supply = <®_3v3_p>; + vddio-supply = <®_3v3_p>; + }; }; &iomuxc { @@ -776,6 +787,8 @@ }; &usdhc1 { + assigned-clocks = <&clk IMX8MQ_CLK_USDHC1>; + assigned-clock-rates = <400000000>; pinctrl-names = "default", "state_100mhz", "state_200mhz"; pinctrl-0 = <&pinctrl_usdhc1>; pinctrl-1 = <&pinctrl_usdhc1_100mhz>; @@ -786,6 +799,8 @@ }; &usdhc2 { + assigned-clocks = <&clk IMX8MQ_CLK_USDHC2>; + assigned-clock-rates = <200000000>; pinctrl-names = "default", "state_100mhz", "state_200mhz"; pinctrl-0 = <&pinctrl_usdhc2>; pinctrl-1 = <&pinctrl_usdhc2_100mhz>; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts b/arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts new file mode 100644 index 000000000000..81d269296610 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts @@ -0,0 +1,407 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2018 Boundary Devices + */ + +/dts-v1/; + +#include <dt-bindings/input/input.h> +#include "imx8mq.dtsi" + +/ { + model = "Boundary Devices i.MX8MQ Nitrogen8M"; + compatible = "boundary,imx8mq-nitrogen8m", "fsl,imx8mq"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0x00000000 0x40000000 0 0x80000000>; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_keys>; + + power { + label = "Power Button"; + gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + wakeup-source; + }; + }; + + reg_vref_0v9: regulator-vref-0v9 { + compatible = "regulator-fixed"; + regulator-name = "vref-0v9"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + }; + + reg_vref_1v8: regulator-vref-1v8 { + compatible = "regulator-fixed"; + regulator-name = "vref-1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + reg_vref_2v5: regulator-vref-2v5 { + compatible = "regulator-fixed"; + regulator-name = "vref-2v5"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + }; + + reg_vref_3v3: regulator-vref-3v3 { + compatible = "regulator-fixed"; + regulator-name = "vref-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_vref_5v: regulator-vref-5v { + compatible = "regulator-fixed"; + regulator-name = "vref-5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; +}; + + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1>; + phy-mode = "rgmii-id"; + phy-handle = <ðphy0>; + fsl,magic-packet; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@4 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <4>; + interrupts-extended = <&gpio1 11 IRQ_TYPE_LEVEL_LOW>; + }; + }; +}; + +&i2c1 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + i2cmux@70 { + compatible = "nxp,pca9546"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1_pca9546>; + reg = <0x70>; + reset-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; + #address-cells = <1>; + #size-cells = <0>; + + i2c1a: i2c1@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + reg_arm_dram: regulator@60 { + compatible = "fcs,fan53555"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_arm_dram>; + reg = <0x60>; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + vsel-gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>; + }; + }; + + i2c1b: i2c1@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + reg_dram_1p1v: regulator@60 { + compatible = "fcs,fan53555"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_dram_1p1v>; + reg = <0x60>; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + vsel-gpios = <&gpio2 11 GPIO_ACTIVE_HIGH>; + }; + }; + + i2c1c: i2c1@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + + reg_soc_gpu_vpu: regulator@60 { + compatible = "fcs,fan53555"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_soc_gpu_vpu>; + reg = <0x60>; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + vsel-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>; + }; + }; + + i2c1d: i2c1@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + + rtc@68 { + compatible = "microcrystal,rv4162"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1d_rv4162>; + reg = <0x68>; + interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_LOW>; + wakeup-source; + }; + }; + }; +}; + +&uart1 { /* console */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + assigned-clocks = <&clk IMX8MQ_CLK_UART1>; + assigned-clock-parents = <&clk IMX8MQ_CLK_25M>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + assigned-clocks = <&clk IMX8MQ_CLK_UART2>; + assigned-clock-parents = <&clk IMX8MQ_CLK_25M>; + status = "okay"; +}; + +&usdhc1 { + assigned-clocks = <&clk IMX8MQ_CLK_USDHC1>; + assigned-clock-rates = <400000000>; + bus-width = <8>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + non-removable; + vmmc-supply = <®_vref_1v8>; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + pinctrl_hog: hoggrp { + fsl,pins = < + /* J17 connector, odd */ + MX8MQ_IOMUXC_SAI1_RXFS_GPIO4_IO0 0x19 /* Pin 19 */ + MX8MQ_IOMUXC_SAI1_RXC_GPIO4_IO1 0x19 /* Pin 21 */ + MX8MQ_IOMUXC_SAI1_RXD1_GPIO4_IO3 0x19 /* Pin 23 */ + MX8MQ_IOMUXC_SAI1_RXD2_GPIO4_IO4 0x19 /* Pin 25 */ + MX8MQ_IOMUXC_SAI1_RXD3_GPIO4_IO5 0x19 /* Pin 27 */ + MX8MQ_IOMUXC_SAI1_RXD4_GPIO4_IO6 0x19 /* Pin 29 */ + MX8MQ_IOMUXC_SAI1_RXD5_GPIO4_IO7 0x19 /* Pin 31 */ + MX8MQ_IOMUXC_SAI1_RXD6_GPIO4_IO8 0x19 /* Pin 33 */ + MX8MQ_IOMUXC_SAI1_RXD7_GPIO4_IO9 0x19 /* Pin 35 */ + MX8MQ_IOMUXC_SAI1_TXD1_GPIO4_IO13 0x19 /* Pin 39 */ + MX8MQ_IOMUXC_SAI1_TXD2_GPIO4_IO14 0x19 /* Pin 41 */ + MX8MQ_IOMUXC_SAI1_TXD3_GPIO4_IO15 0x19 /* Pin 43 */ + MX8MQ_IOMUXC_SAI1_TXD4_GPIO4_IO16 0x19 /* Pin 45 */ + MX8MQ_IOMUXC_SAI1_TXD5_GPIO4_IO17 0x19 /* Pin 47 */ + MX8MQ_IOMUXC_SAI1_TXD6_GPIO4_IO18 0x19 /* Pin 49 */ + MX8MQ_IOMUXC_SAI1_TXD7_GPIO4_IO19 0x19 /* Pin 51 */ + + /* J17 connector, even */ + MX8MQ_IOMUXC_SAI3_RXFS_GPIO4_IO28 0x19 /* Pin 44 */ + MX8MQ_IOMUXC_SAI3_RXC_GPIO4_IO29 0x19 /* Pin 48 */ + MX8MQ_IOMUXC_GPIO1_IO10_GPIO1_IO10 0x19 /* Pin 50 */ + MX8MQ_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x19 /* Pin 54 */ + MX8MQ_IOMUXC_GPIO1_IO05_GPIO1_IO5 0x19 /* Pin 56 */ + + /* J18 connector, odd */ + MX8MQ_IOMUXC_NAND_CE3_B_GPIO3_IO4 0x19 /* Pin 41 */ + MX8MQ_IOMUXC_NAND_CLE_GPIO3_IO5 0x19 /* Pin 43 */ + MX8MQ_IOMUXC_NAND_READY_B_GPIO3_IO16 0x19 /* Pin 45 */ + MX8MQ_IOMUXC_NAND_DATA05_GPIO3_IO11 0x19 /* Pin 47 */ + MX8MQ_IOMUXC_NAND_WP_B_GPIO3_IO18 0x19 /* Pin 49 */ + MX8MQ_IOMUXC_NAND_DQS_GPIO3_IO14 0x19 /* Pin 53 */ + + /* J18 connector, even */ + MX8MQ_IOMUXC_NAND_ALE_GPIO3_IO0 0x19 /* Pin 32 */ + MX8MQ_IOMUXC_NAND_CE0_B_GPIO3_IO1 0x19 /* Pin 36 */ + MX8MQ_IOMUXC_NAND_DATA00_GPIO3_IO6 0x19 /* Pin 38 */ + MX8MQ_IOMUXC_NAND_DATA01_GPIO3_IO7 0x19 /* Pin 40 */ + MX8MQ_IOMUXC_NAND_DATA02_GPIO3_IO8 0x19 /* Pin 42 */ + MX8MQ_IOMUXC_NAND_DATA03_GPIO3_IO9 0x19 /* Pin 44 */ + MX8MQ_IOMUXC_NAND_DATA04_GPIO3_IO10 0x19 /* Pin 46 */ + + /* J13 Pin 2, WL_WAKE */ + MX8MQ_IOMUXC_SAI5_RXD2_GPIO3_IO23 0xd6 + /* J13 Pin 4, WL_IRQ, not needed for Silex */ + MX8MQ_IOMUXC_SAI5_RXD0_GPIO3_IO21 0xd6 + /* J13 pin 9, unused */ + MX8MQ_IOMUXC_SD2_CD_B_GPIO2_IO12 0x19 + /* J13 Pin 41, BT_CLK_REQ */ + MX8MQ_IOMUXC_SAI5_RXD1_GPIO3_IO22 0xd6 + /* J13 Pin 42, BT_HOST_WAKE */ + MX8MQ_IOMUXC_SAI5_MCLK_GPIO3_IO25 0xd6 + + /* Clock for both CSI1 and CSI2 */ + MX8MQ_IOMUXC_GPIO1_IO15_CCMSRCGPCMIX_CLKO2 0x07 + /* test points */ + MX8MQ_IOMUXC_GPIO1_IO04_GPIO1_IO4 0xc1 /* TP87 */ + >; + }; + + pinctrl_fec1: fec1grp { + fsl,pins = < + MX8MQ_IOMUXC_ENET_MDC_ENET1_MDC 0x3 + MX8MQ_IOMUXC_ENET_MDIO_ENET1_MDIO 0x23 + MX8MQ_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f + MX8MQ_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f + MX8MQ_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f + MX8MQ_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f + MX8MQ_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f + MX8MQ_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f + MX8MQ_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91 + MX8MQ_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91 + MX8MQ_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91 + MX8MQ_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91 + MX8MQ_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91 + MX8MQ_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91 + MX8MQ_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x19 + MX8MQ_IOMUXC_GPIO1_IO11_GPIO1_IO11 0x59 + >; + }; + + pinctrl_gpio_keys: gpio-keysgrp { + fsl,pins = < + MX8MQ_IOMUXC_GPIO1_IO07_GPIO1_IO7 0x19 + >; + }; + + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL 0x4000007f + MX8MQ_IOMUXC_I2C1_SDA_I2C1_SDA 0x4000007f + >; + }; + + pinctrl_i2c1_pca9546: i2c1-pca9546grp { + fsl,pins = < + MX8MQ_IOMUXC_GPIO1_IO08_GPIO1_IO8 0x49 + >; + }; + + pinctrl_i2c1d_rv4162: i2c1d-rv4162grp { + fsl,pins = < + MX8MQ_IOMUXC_GPIO1_IO06_GPIO1_IO6 0x49 + >; + }; + + pinctrl_reg_arm_dram: reg-arm-dramgrp { + fsl,pins = < + MX8MQ_IOMUXC_SAI5_RXD3_GPIO3_IO24 0x16 + >; + }; + + pinctrl_reg_dram_1p1v: reg-dram-1p1vgrp { + fsl,pins = < + MX8MQ_IOMUXC_SD1_STROBE_GPIO2_IO11 0x16 + >; + }; + + pinctrl_reg_soc_gpu_vpu: reg-soc-gpu-vpugrp { + fsl,pins = < + MX8MQ_IOMUXC_SD2_WP_GPIO2_IO20 0x16 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX8MQ_IOMUXC_UART1_RXD_UART1_DCE_RX 0x45 + MX8MQ_IOMUXC_UART1_TXD_UART1_DCE_TX 0x45 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX8MQ_IOMUXC_UART2_RXD_UART2_DCE_RX 0x45 + MX8MQ_IOMUXC_UART2_TXD_UART2_DCE_TX 0x45 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x83 + MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xc3 + MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xc3 + MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xc3 + MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xc3 + MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xc3 + MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xc3 + MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xc3 + MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xc3 + MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xc3 + MX8MQ_IOMUXC_SD1_RESET_B_GPIO2_IO10 0x41 + >; + }; + + pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp { + fsl,pins = < + MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x8d + MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xcd + MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xcd + MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xcd + MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xcd + MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xcd + MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xcd + MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xcd + MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xcd + MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xcd + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp { + fsl,pins = < + MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x9f + MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xdf + MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xdf + MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xdf + MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xdf + MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xdf + MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xdf + MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xdf + MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xdf + MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xdf + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX8MQ_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6 + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-phanbell.dts b/arch/arm64/boot/dts/freescale/imx8mq-phanbell.dts new file mode 100644 index 000000000000..3f2a489a4ad8 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mq-phanbell.dts @@ -0,0 +1,376 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2017-2019 NXP + */ + +/dts-v1/; + +#include "imx8mq.dtsi" + +/ { + model = "Google i.MX8MQ Phanbell"; + compatible = "google,imx8mq-phanbell", "fsl,imx8mq"; + + chosen { + stdout-path = &uart1; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0x00000000 0x40000000 0 0x40000000>; + }; + + pmic_osc: clock-pmic { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "pmic_osc"; + }; + + reg_usdhc2_vmmc: regulator-usdhc2-vmmc { + compatible = "regulator-fixed"; + regulator-name = "VSD_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +&A53_0 { + cpu-supply = <&buck2>; +}; + +&A53_1 { + cpu-supply = <&buck2>; +}; + +&A53_2 { + cpu-supply = <&buck2>; +}; + +&A53_3 { + cpu-supply = <&buck2>; +}; + +&i2c1 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + pmic: pmic@4b { + compatible = "rohm,bd71837"; + reg = <0x4b>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; + #clock-cells = <0>; + clocks = <&pmic_osc>; + clock-output-names = "pmic_clk"; + interrupt-parent = <&gpio1>; + interrupts = <3 GPIO_ACTIVE_LOW>; + + regulators { + buck1: BUCK1 { + regulator-name = "buck1"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1300000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <1250>; + rohm,dvs-run-voltage = <900000>; + rohm,dvs-idle-voltage = <900000>; + rohm,dvs-suspend-voltage = <800000>; + }; + + buck2: BUCK2 { + regulator-name = "buck2"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1000000>; + regulator-boot-on; + regulator-always-on; + rohm,dvs-run-voltage = <1000000>; + rohm,dvs-idle-voltage = <900000>; + }; + + buck3: BUCK3 { + regulator-name = "buck3"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1300000>; + regulator-boot-on; + rohm,dvs-run-voltage = <900000>; + }; + + buck4: BUCK4 { + regulator-name = "buck4"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1300000>; + regulator-boot-on; + regulator-always-on; + rohm,dvs-run-voltage = <900000>; + }; + + buck5: BUCK5 { + regulator-name = "buck5"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1350000>; + regulator-boot-on; + regulator-always-on; + }; + + buck6: BUCK6 { + regulator-name = "buck6"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + buck7: BUCK7 { + regulator-name = "buck7"; + regulator-min-microvolt = <1605000>; + regulator-max-microvolt = <1995000>; + regulator-boot-on; + regulator-always-on; + }; + + buck8: BUCK8 { + regulator-name = "buck8"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1: LDO1 { + regulator-name = "ldo1"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo2: LDO2 { + regulator-name = "ldo2"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo3: LDO3 { + regulator-name = "ldo3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo4: LDO4 { + regulator-name = "ldo4"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo5: LDO5 { + regulator-name = "ldo5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo6: LDO6 { + regulator-name = "ldo6"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo7: LDO7 { + regulator-name = "ldo7"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; + bus-width = <4>; + cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; + vmmc-supply = <®_usdhc2_vmmc>; + status = "okay"; +}; + +&usb3_phy0 { + status = "okay"; +}; + +&usb_dwc3_0 { + dr_mode = "otg"; + status = "okay"; +}; + +&usb3_phy1 { + status = "okay"; +}; + +&usb_dwc3_1 { + dr_mode = "host"; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; + +&iomuxc { + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL 0x4000007f + MX8MQ_IOMUXC_I2C1_SDA_I2C1_SDA 0x4000007f + >; + }; + + pinctrl_pmic: pmicirq { + fsl,pins = < + MX8MQ_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x41 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX8MQ_IOMUXC_UART1_RXD_UART1_DCE_RX 0x49 + MX8MQ_IOMUXC_UART1_TXD_UART1_DCE_TX 0x49 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x83 + MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xc3 + MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xc3 + MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xc3 + MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xc3 + MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xc3 + MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xc3 + MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xc3 + MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xc3 + MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xc3 + MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x83 + MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1 + >; + }; + + pinctrl_usdhc1_100mhz: usdhc1grp100mhz { + fsl,pins = < + MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x85 + MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xc5 + MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xc5 + MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xc5 + MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xc5 + MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xc5 + MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xc5 + MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xc5 + MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xc5 + MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xc5 + MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x85 + MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1 + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1grp200mhz { + fsl,pins = < + MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x87 + MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xc7 + MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xc7 + MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xc7 + MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xc7 + MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xc7 + MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xc7 + MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xc7 + MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xc7 + MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xc7 + MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x87 + MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1 + >; + }; + + pinctrl_usdhc2_gpio: usdhc2grpgpio { + fsl,pins = < + MX8MQ_IOMUXC_SD2_CD_B_GPIO2_IO12 0x41 + MX8MQ_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x41 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x83 + MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xc3 + MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xc3 + MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xc3 + MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xc3 + MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xc3 + MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xc1 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2grp100mhz { + fsl,pins = < + MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x85 + MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xc5 + MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xc5 + MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xc5 + MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xc5 + MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xc5 + MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xc1 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2grp200mhz { + fsl,pins = < + MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x87 + MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xc7 + MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xc7 + MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xc7 + MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xc7 + MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xc7 + MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xc1 + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX8MQ_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6 + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-pico-pi.dts b/arch/arm64/boot/dts/freescale/imx8mq-pico-pi.dts new file mode 100644 index 000000000000..59da96b7143f --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mq-pico-pi.dts @@ -0,0 +1,417 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2018 Wandboard, Org. + * Copyright 2017 NXP + * + * Author: Richard Hu <hakahu@gmail.com> + */ + +/dts-v1/; + +#include "imx8mq.dtsi" + +/ { + model = "TechNexion PICO-PI-8M"; + compatible = "technexion,pico-pi-imx8m", "fsl,imx8mq"; + + chosen { + stdout-path = &uart1; + }; + + pmic_osc: clock-pmic { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "pmic_osc"; + }; + + reg_usb_otg_vbus: regulator-usb-otg-vbus { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_otg_vbus>; + compatible = "regulator-fixed"; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 14 GPIO_ACTIVE_LOW>; + }; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1 &pinctrl_enet_3v3>; + phy-mode = "rgmii-id"; + phy-handle = <ðphy0>; + fsl,magic-packet; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + }; + }; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + pmic: pmic@4b { + reg = <0x4b>; + compatible = "rohm,bd71837"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; + clocks = <&pmic_osc>; + clock-names = "osc"; + clock-output-names = "pmic_clk"; + interrupt-parent = <&gpio1>; + interrupts = <3 GPIO_ACTIVE_LOW>; + interrupt-names = "irq"; + + regulators { + buck1: BUCK1 { + regulator-name = "buck1"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1300000>; + regulator-boot-on; + regulator-ramp-delay = <1250>; + rohm,dvs-run-voltage = <900000>; + rohm,dvs-idle-voltage = <850000>; + rohm,dvs-suspend-voltage = <800000>; + }; + + buck2: BUCK2 { + regulator-name = "buck2"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1300000>; + regulator-boot-on; + regulator-ramp-delay = <1250>; + rohm,dvs-run-voltage = <1000000>; + rohm,dvs-idle-voltage = <900000>; + }; + + buck3: BUCK3 { + regulator-name = "buck3"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1300000>; + regulator-boot-on; + rohm,dvs-run-voltage = <1000000>; + }; + + buck4: BUCK4 { + regulator-name = "buck4"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1300000>; + regulator-boot-on; + rohm,dvs-run-voltage = <1000000>; + }; + + buck5: BUCK5 { + regulator-name = "buck5"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1350000>; + regulator-boot-on; + }; + + buck6: BUCK6 { + regulator-name = "buck6"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + + buck7: BUCK7 { + regulator-name = "buck7"; + regulator-min-microvolt = <1605000>; + regulator-max-microvolt = <1995000>; + regulator-boot-on; + }; + + buck8: BUCK8 { + regulator-name = "buck8"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + regulator-boot-on; + }; + + ldo1: LDO1 { + regulator-name = "ldo1"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo2: LDO2 { + regulator-name = "ldo2"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo3: LDO3 { + regulator-name = "ldo3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + + ldo4: LDO4 { + regulator-name = "ldo4"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + }; + + ldo5: LDO5 { + regulator-name = "ldo5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + + ldo6: LDO6 { + regulator-name = "ldo6"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + }; + + ldo7: LDO7 { + regulator-name = "ldo7"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + }; + }; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; +}; + +&uart1 { /* console */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&usdhc1 { + assigned-clocks = <&clk IMX8MQ_CLK_USDHC1>; + assigned-clock-rates = <400000000>; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&usdhc2 { + assigned-clocks = <&clk IMX8MQ_CLK_USDHC2>; + assigned-clock-rates = <200000000>; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; + bus-width = <4>; + cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&usb3_phy0 { + status = "okay"; +}; + +&usb3_phy1 { + status = "okay"; +}; + +&usb_dwc3_1 { + dr_mode = "host"; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; + +&iomuxc { + pinctrl_enet_3v3: enet3v3grp { + fsl,pins = < + MX8MQ_IOMUXC_GPIO1_IO00_GPIO1_IO0 0x19 + >; + }; + + pinctrl_fec1: fec1grp { + fsl,pins = < + MX8MQ_IOMUXC_ENET_MDC_ENET1_MDC 0x3 + MX8MQ_IOMUXC_ENET_MDIO_ENET1_MDIO 0x23 + MX8MQ_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f + MX8MQ_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f + MX8MQ_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f + MX8MQ_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f + MX8MQ_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91 + MX8MQ_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91 + MX8MQ_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91 + MX8MQ_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91 + MX8MQ_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f + MX8MQ_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91 + MX8MQ_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91 + MX8MQ_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f + MX8MQ_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x19 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL 0x4000007f + MX8MQ_IOMUXC_I2C1_SDA_I2C1_SDA 0x4000007f + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX8MQ_IOMUXC_I2C2_SCL_I2C2_SCL 0x4000007f + MX8MQ_IOMUXC_I2C2_SDA_I2C2_SDA 0x4000007f + >; + }; + + pinctrl_otg_vbus: otgvbusgrp { + fsl,pins = < + MX8MQ_IOMUXC_NAND_DQS_GPIO3_IO14 0x19 /* USB OTG VBUS Enable */ + >; + }; + + pinctrl_pmic: pmicirq { + fsl,pins = < + MX8MQ_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x41 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX8MQ_IOMUXC_UART1_RXD_UART1_DCE_RX 0x49 + MX8MQ_IOMUXC_UART1_TXD_UART1_DCE_TX 0x49 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX8MQ_IOMUXC_UART2_RXD_UART2_DCE_RX 0x49 + MX8MQ_IOMUXC_UART2_TXD_UART2_DCE_TX 0x49 + MX8MQ_IOMUXC_UART4_RXD_UART2_DCE_CTS_B 0x49 + MX8MQ_IOMUXC_UART4_TXD_UART2_DCE_RTS_B 0x49 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x83 + MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xc3 + MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xc3 + MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xc3 + MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xc3 + MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xc3 + MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xc3 + MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xc3 + MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xc3 + MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xc3 + MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x83 + >; + }; + + pinctrl_usdhc1_100mhz: usdhc1grp100mhz { + fsl,pins = < + MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x85 + MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xc5 + MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xc5 + MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xc5 + MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xc5 + MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xc5 + MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xc5 + MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xc5 + MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xc5 + MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xc5 + MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x85 + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1grp200mhz { + fsl,pins = < + MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x87 + MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xc7 + MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xc7 + MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xc7 + MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xc7 + MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xc7 + MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xc7 + MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xc7 + MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xc7 + MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xc7 + MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x87 + >; + }; + + pinctrl_usdhc2_gpio: usdhc2grpgpio { + fsl,pins = < + MX8MQ_IOMUXC_SD2_CD_B_GPIO2_IO12 0x41 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x83 + MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xc3 + MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xc3 + MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xc3 + MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xc3 + MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xc3 + MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xc1 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2grp100mhz { + fsl,pins = < + MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x85 + MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xc5 + MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xc5 + MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xc5 + MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xc5 + MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xc5 + MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xc1 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2grp200mhz { + fsl,pins = < + MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x87 + MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xc7 + MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xc7 + MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xc7 + MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xc7 + MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xc7 + MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xc1 + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX8MQ_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6 + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-sr-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-sr-som.dtsi new file mode 100644 index 000000000000..602c870a7ccb --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mq-sr-som.dtsi @@ -0,0 +1,317 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright (C) 2018 Jon Nettleton <jon@solid-run.com> + */ + +#include "imx8mq.dtsi" + +/ { + reg_vdd_3v3: regulator-vdd-3v3 { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-name = "vdd_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1>; + phy-mode = "rgmii-id"; + phy-handle = <ðphy0>; + phy-reset-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; + phy-reset-duration = <2>; + fsl,magic-packet; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@4 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <4>; + }; + }; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + clock-frequency = <400000>; + status = "okay"; + + pmic: pmic@8 { + compatible = "fsl,pfuze100"; + reg = <0x08>; + + regulators { + sw1a_reg: sw1ab { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + }; + + sw1c_reg: sw1c { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + }; + + sw2_reg: sw2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + sw3a_reg: sw3ab { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-always-on; + }; + + sw4_reg: sw4 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + swbst_reg: swbst { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5150000>; + }; + + snvs_reg: vsnvs { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + + vref_reg: vrefddr { + regulator-always-on; + }; + + vgen1_reg: vgen1 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + vgen2_reg: vgen2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + regulator-always-on; + }; + + vgen3_reg: vgen3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen4_reg: vgen4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen5_reg: vgen5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen6_reg: vgen6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + }; + }; + + eeprom@50 { + compatible = "atmel,24c01"; + reg = <0x50>; + status = "okay"; + }; +}; + +&pgc_gpu{ + power-supply = <&sw1a_reg>; +}; + +&pgc_vpu { + power-supply = <&sw1c_reg>; +}; + +&qspi0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_qspi>; + status = "okay"; + + /* SPI flash; not assembled by default */ + spi_flash: flash@0 { + #address-cells = <1>; + #size-cells = <1>; + reg = <0>; + compatible = "micron,n25q256a", "jedec,spi-nor"; + spi-max-frequency = <29000000>; + status = "disabled"; + }; +}; + +&uart1 { /* console */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + assigned-clocks = <&clk IMX8MQ_CLK_UART1>; + assigned-clock-parents = <&clk IMX8MQ_CLK_25M>; + assigned-clock-rates = <25000000>; + status = "okay"; +}; + +&uart4 { /* ublox BT */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + assigned-clocks = <&clk IMX8MQ_CLK_UART4>; + assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_80M>; + assigned-clock-rates = <80000000>; + status = "okay"; +}; + +&usdhc1 { + assigned-clocks = <&clk IMX8MQ_CLK_USDHC1>; + assigned-clock-rates = <400000000>; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; + +&iomuxc { + pinctrl_fec1: fec1grp { + fsl,pins = < + MX8MQ_IOMUXC_ENET_MDC_ENET1_MDC 0x3 + MX8MQ_IOMUXC_ENET_MDIO_ENET1_MDIO 0x23 + MX8MQ_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f + MX8MQ_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f + MX8MQ_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f + MX8MQ_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f + MX8MQ_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91 + MX8MQ_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91 + MX8MQ_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91 + MX8MQ_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91 + MX8MQ_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f + MX8MQ_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91 + MX8MQ_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91 + MX8MQ_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f + MX8MQ_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x19 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL 0x4000007f + MX8MQ_IOMUXC_I2C1_SDA_I2C1_SDA 0x4000007f + >; + }; + + pinctrl_pcie0: pcie0grp { + fsl,pins = < + MX8MQ_IOMUXC_I2C4_SCL_PCIE1_CLKREQ_B 0x74 + MX8MQ_IOMUXC_SPDIF_EXT_CLK_GPIO5_IO5 0x16 + MX8MQ_IOMUXC_SAI2_RXFS_GPIO4_IO21 0x16 + >; + }; + + pinctrl_qspi: qspigrp { + fsl,pins = < + MX8MQ_IOMUXC_NAND_ALE_QSPI_A_SCLK 0x82 + MX8MQ_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B 0x82 + MX8MQ_IOMUXC_NAND_DATA00_QSPI_A_DATA0 0x82 + MX8MQ_IOMUXC_NAND_DATA01_QSPI_A_DATA1 0x82 + MX8MQ_IOMUXC_NAND_DATA02_QSPI_A_DATA2 0x82 + MX8MQ_IOMUXC_NAND_DATA03_QSPI_A_DATA3 0x82 + + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX8MQ_IOMUXC_UART1_RXD_UART1_DCE_RX 0x49 + MX8MQ_IOMUXC_UART1_TXD_UART1_DCE_TX 0x49 + MX8MQ_IOMUXC_NAND_CE1_B_GPIO3_IO2 0x19 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX8MQ_IOMUXC_UART4_TXD_UART4_DCE_TX 0x49 + MX8MQ_IOMUXC_UART4_RXD_UART4_DCE_RX 0x49 + MX8MQ_IOMUXC_SAI3_TXD_GPIO5_IO1 0x19 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x83 + MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xc3 + MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xc3 + MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xc3 + MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xc3 + MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xc3 + MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xc3 + MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xc3 + MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xc3 + MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xc3 + MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x83 + MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1 + >; + }; + + pinctrl_usdhc1_100mhz: usdhc1grp100mhz { + fsl,pins = < + MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x8d + MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xcd + MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xcd + MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xcd + MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xcd + MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xcd + MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xcd + MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xcd + MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xcd + MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xcd + MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x8d + MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1 + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1grp200mhz { + fsl,pins = < + MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x9f + MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xdf + MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xdf + MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xdf + MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xdf + MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xdf + MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xdf + MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xdf + MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xdf + MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xdf + MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x9f + MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1 + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX8MQ_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6 + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-thor96.dts b/arch/arm64/boot/dts/freescale/imx8mq-thor96.dts new file mode 100644 index 000000000000..b4795a032fa2 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mq-thor96.dts @@ -0,0 +1,581 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2019 Einfochips + * Copyright 2019 Linaro Ltd. + */ + +/dts-v1/; + +#include "imx8mq.dtsi" + +/ { + model = "Einfochips i.MX8MQ Thor96"; + compatible = "einfochips,imx8mq-thor96", "fsl,imx8mq"; + + chosen { + stdout-path = &uart1; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0x00000000 0x40000000 0 0x80000000>; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_leds>; + + user-led1 { + label = "green:user1"; + gpios = <&gpio4 21 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + + user-led2 { + label = "green:user2"; + gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "none"; + }; + + user-led3 { + label = "green:user3"; + gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc1"; + default-state = "off"; + }; + + user-led4 { + label = "green:user4"; + gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>; + panic-indicator; + linux,default-trigger = "none"; + }; + + wlan-active-led { + label = "yellow:wlan"; + gpios = <&gpio4 1 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "phy0tx"; + default-state = "off"; + }; + + bt-active-led { + label = "blue:bt"; + gpios = <&gpio4 0 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "hci0-power"; + default-state = "off"; + }; + }; + + reg_usdhc1_vmmc: reg-usdhc1-vmmc { + compatible = "regulator-fixed"; + regulator-name = "VDD_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_usdhc1_vqmmc: reg-usdhc1-vqmmc { + compatible = "regulator-fixed"; + regulator-name = "VCC_1V8_EXT"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + reg_usdhc2_vmmc: reg-usdhc2-vmmc { + compatible = "regulator-fixed"; + regulator-name = "VSD_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_usdhc2>; + gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_usdhc2_vqmmc: reg-usdhc2-vqmmc { + compatible = "regulator-fixed"; + regulator-name = "NVCC_SD2"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wifi_reg_on>; + gpio = <&gpio3 3 GPIO_ACTIVE_HIGH>; + }; +}; + +/* LS-SPI0 */ +&ecspi2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi2>; + status = "okay"; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1>; + phy-mode = "rgmii-id"; + phy-reset-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; + phy-handle = <ðphy>; + fsl,magic-packet; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy: ethernet-phy@3 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <3>; + }; + }; +}; + +/* LS-I2C0 */ +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + pmic@8 { + compatible = "fsl,pfuze100"; + reg = <0x8>; + + regulators { + sw1a_reg: sw1ab { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + }; + + sw1c_reg: sw1c { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + }; + + sw2_reg: sw2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + sw3a_reg: sw3ab { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-always-on; + }; + + sw4_reg: sw4 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + swbst_reg: swbst { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5150000>; + }; + + snvs_reg: vsnvs { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + + vref_reg: vrefddr { + regulator-always-on; + }; + + vgen1_reg: vgen1 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + vgen2_reg: vgen2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + regulator-always-on; + }; + + vgen3_reg: vgen3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen4_reg: vgen4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen5_reg: vgen5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen6_reg: vgen6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + }; + }; +}; + +/* LS-I2C1 */ +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + eeprom: eeprom@50 { + compatible = "atmel,24c256"; + reg = <0x50>; + }; +}; + +/* HS-I2C2 */ +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; +}; + +/* HS-I2C3 */ +&i2c4 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c4>; + status = "okay"; +}; + +&pgc_gpu { + power-supply = <&sw1a_reg>; +}; + +&pgc_vpu { + power-supply = <&sw1c_reg>; +}; + +&qspi0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_qspi0>; + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + spi-max-frequency = <100000000>; + reg = <0>; + }; +}; + +/* Debug UART */ +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + assigned-clocks = <&clk IMX8MQ_CLK_UART1>; + assigned-clock-parents = <&clk IMX8MQ_CLK_25M>; + status = "okay"; +}; + +/* LS-UART0 */ +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + assigned-clocks = <&clk IMX8MQ_CLK_UART2>; + assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_80M>; + uart-has-rtscts; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + device-wakeup-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>; + host-wakeup-gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&gpio3 5 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_bt_gpios>; + }; +}; + +/* LS-UART1 */ +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + assigned-clocks = <&clk IMX8MQ_CLK_UART3>; + assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_80M>; + status = "okay"; +}; + +&usb3_phy1 { + status = "okay"; +}; + +&usb_dwc3_1 { + dr_mode = "host"; + status = "okay"; +}; + +/* SDIO */ +&usdhc1 { + #address-cells = <0x1>; + #size-cells = <0x0>; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + vmmc-supply = <®_usdhc1_vmmc>; + vqmmc-supply = <®_usdhc1_vqmmc>; + mmc-pwrseq = <&sdio_pwrseq>; + bus-width = <4>; + non-removable; + no-sd; + no-emmc; + status = "okay"; + + brcmf: wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + }; +}; + +/* uSD */ +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; + vmmc-supply = <®_usdhc2_vmmc>; + vqmmc-supply = <®_usdhc2_vqmmc>; + cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; + bus-width = <4>; + no-sdio; + no-emmc; + disable-wp; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; + +&iomuxc { + pinctrl_bt_gpios: btgpiosgrp { + fsl,pins = < + MX8MQ_IOMUXC_SAI5_RXD1_GPIO3_IO22 0x19 + MX8MQ_IOMUXC_NAND_DQS_GPIO3_IO14 0x19 + MX8MQ_IOMUXC_NAND_CLE_GPIO3_IO5 0x19 + >; + }; + + pinctrl_ecspi2: ecspi2grp { + fsl,pins = < + MX8MQ_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0x16 + MX8MQ_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0x16 + MX8MQ_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0x16 + MX8MQ_IOMUXC_ECSPI2_SS0_ECSPI2_SS0 0x16 + >; + }; + + pinctrl_fec1: fec1grp { + fsl,pins = < + MX8MQ_IOMUXC_ENET_MDC_ENET1_MDC 0x4 + MX8MQ_IOMUXC_ENET_MDIO_ENET1_MDIO 0x24 + MX8MQ_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1c + MX8MQ_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1c + MX8MQ_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1c + MX8MQ_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1c + MX8MQ_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91 + MX8MQ_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91 + MX8MQ_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91 + MX8MQ_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91 + MX8MQ_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1c + MX8MQ_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91 + MX8MQ_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91 + MX8MQ_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1c + MX8MQ_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x19 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL 0x4000007f + MX8MQ_IOMUXC_I2C1_SDA_I2C1_SDA 0x4000007f + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX8MQ_IOMUXC_I2C2_SCL_I2C2_SCL 0x4000007f + MX8MQ_IOMUXC_I2C2_SDA_I2C2_SDA 0x4000007f + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX8MQ_IOMUXC_I2C3_SCL_I2C3_SCL 0x4000007f + MX8MQ_IOMUXC_I2C3_SDA_I2C3_SDA 0x4000007f + >; + }; + + pinctrl_i2c4: i2c4grp { + fsl,pins = < + MX8MQ_IOMUXC_I2C4_SCL_I2C4_SCL 0x4000007f + MX8MQ_IOMUXC_I2C4_SDA_I2C4_SDA 0x4000007f + >; + }; + + pinctrl_leds: ledsgrp { + fsl,pins = < + MX8MQ_IOMUXC_SAI2_RXFS_GPIO4_IO21 0x19 + MX8MQ_IOMUXC_SAI2_RXC_GPIO4_IO22 0x19 + MX8MQ_IOMUXC_SAI3_RXFS_GPIO4_IO28 0x19 + MX8MQ_IOMUXC_SAI3_RXC_GPIO4_IO29 0x19 + MX8MQ_IOMUXC_SAI1_RXC_GPIO4_IO1 0x19 + MX8MQ_IOMUXC_SAI1_RXFS_GPIO4_IO0 0x19 + >; + }; + + pinctrl_qspi0: qspi0grp { + fsl,pins = < + MX8MQ_IOMUXC_NAND_ALE_QSPI_A_SCLK 0x82 + MX8MQ_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B 0x82 + MX8MQ_IOMUXC_NAND_DATA00_QSPI_A_DATA0 0x82 + MX8MQ_IOMUXC_NAND_DATA01_QSPI_A_DATA1 0x82 + MX8MQ_IOMUXC_NAND_DATA02_QSPI_A_DATA2 0x82 + MX8MQ_IOMUXC_NAND_DATA03_QSPI_A_DATA3 0x82 + + >; + }; + + pinctrl_reg_usdhc2: regusdhc2grp { + fsl,pins = < + MX8MQ_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x41 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX8MQ_IOMUXC_UART1_RXD_UART1_DCE_RX 0x49 + MX8MQ_IOMUXC_UART1_TXD_UART1_DCE_TX 0x49 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX8MQ_IOMUXC_UART2_RXD_UART2_DCE_RX 0x49 + MX8MQ_IOMUXC_UART2_TXD_UART2_DCE_TX 0x49 + MX8MQ_IOMUXC_UART4_RXD_UART2_DCE_CTS_B 0x49 + MX8MQ_IOMUXC_UART4_TXD_UART2_DCE_RTS_B 0x49 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX8MQ_IOMUXC_UART3_TXD_UART3_DCE_TX 0x49 + MX8MQ_IOMUXC_UART3_RXD_UART3_DCE_RX 0x49 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x83 + MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xc3 + MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xc3 + MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xc3 + MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xc3 + MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xc3 + MX8MQ_IOMUXC_GPIO1_IO00_ANAMIX_REF_CLK_32K 0x85 + >; + }; + + pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp { + fsl,pins = < + MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x8d + MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xcd + MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xcd + MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xcd + MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xcd + MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xcd + MX8MQ_IOMUXC_GPIO1_IO00_ANAMIX_REF_CLK_32K 0x85 + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp { + fsl,pins = < + MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x9f + MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xdf + MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xdf + MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xdf + MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xdf + MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xdf + MX8MQ_IOMUXC_GPIO1_IO00_ANAMIX_REF_CLK_32K 0x85 + >; + }; + + pinctrl_usdhc2_gpio: usdhc2gpiogrp { + fsl,pins = < + MX8MQ_IOMUXC_SD2_CD_B_GPIO2_IO12 0x41 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x83 + MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xc3 + MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xc3 + MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xc3 + MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xc3 + MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xc3 + MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xc1 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { + fsl,pins = < + MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x8c + MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xcc + MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xcc + MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xcc + MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xcc + MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xcc + MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xc1 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { + fsl,pins = < + MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x9c + MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xdc + MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xdc + MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xdc + MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xdc + MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xdc + MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xcc + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX8MQ_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6 + >; + }; + + pinctrl_wifi_reg_on: wifiregongrp { + fsl,pins = < + MX8MQ_IOMUXC_NAND_CE2_B_GPIO3_IO3 0x17059 + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-rmb3.dts b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-rmb3.dts index d2a6da479980..6b3581366d67 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-rmb3.dts +++ b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-rmb3.dts @@ -8,7 +8,7 @@ #include "imx8mq-zii-ultra.dtsi" / { - model = "ZII i.MX8MQ Ultra RMB3 Board"; + model = "ZII Ultra RMB3 Board"; compatible = "zii,imx8mq-ultra-rmb3", "zii,imx8mq-ultra", "fsl,imx8mq"; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-zest.dts b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-zest.dts index 1084d9330403..173b9e9b2bbd 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-zest.dts +++ b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-zest.dts @@ -8,7 +8,7 @@ #include "imx8mq-zii-ultra.dtsi" / { - model = "ZII i.MX8MQ Ultra Zest Board"; + model = "ZII Ultra Zest Board"; compatible = "zii,imx8mq-ultra-zest", "zii,imx8mq-ultra", "fsl,imx8mq"; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi index 7a1706f969f0..6a55165bd76a 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi @@ -62,29 +62,26 @@ reg_3p3_main: regulator-3p3-main { compatible = "regulator-fixed"; vin-supply = <®_12p0_main>; - regulator-name = "3V3V_MAIN"; + regulator-name = "3V3_MAIN"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; }; - reg_5p0_user_usb: regulator-5p0-user-usb { + reg_gen_3p3: regulator-gen-3p3 { compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_reg_user_usb>; - vin-supply = <®_5p0_main>; - regulator-name = "5V_USER_USB"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio3 12 GPIO_ACTIVE_LOW>; - startup-delay-us = <1000>; + vin-supply = <®_3p3_main>; + regulator-name = "GEN_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; }; reg_usdhc2_vmmc: regulator-vsd-3v3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_reg_usdhc2>; compatible = "regulator-fixed"; - vin-supply = <®_3p3_main>; + vin-supply = <®_gen_3p3>; regulator-name = "3V3_SD"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; @@ -100,9 +97,9 @@ regulator-name = "0V9_ARM"; regulator-min-microvolt = <900000>; regulator-max-microvolt = <1000000>; - gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>; - states = <1000000 0x0 - 900000 0x1>; + gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>; + states = <1000000 0x1 + 900000 0x0>; regulator-always-on; }; }; @@ -244,6 +241,13 @@ line-name = "usb-mode1"; }; + usb-pwr { + gpio-hog; + gpios = <12 GPIO_ACTIVE_LOW>; + output-high; + line-name = "usb-pwr-ctrl-en-n"; + }; + usb-mode2 { gpio-hog; gpios = <13 GPIO_ACTIVE_HIGH>; @@ -257,6 +261,29 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; + + accelerometer@1c { + compatible = "fsl,mma8451"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_accel>; + reg = <0x1c>; + interrupt-parent = <&gpio3>; + interrupts = <20 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "INT2"; + vdd-supply = <®_gen_3p3>; + vddio-supply = <®_gen_3p3>; + }; + + ucs1002: charger@32 { + compatible = "microchip,ucs1002"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ucs1002>; + reg = <0x32>; + interrupt-parent = <&gpio3>; + interrupts = <17 IRQ_TYPE_EDGE_BOTH>, + <18 IRQ_TYPE_EDGE_BOTH>; + interrupt-names = "a_det", "alert"; + }; }; &i2c2 { @@ -373,6 +400,11 @@ reg = <0x2c>; reset-gpios = <&gpio3 25 GPIO_ACTIVE_LOW>; }; + + watchdog@38 { + compatible = "zii,rave-wdt"; + reg = <0x38>; + }; }; &i2c4 { @@ -428,7 +460,7 @@ }; &usb3_phy0 { - vbus-supply = <®_5p0_user_usb>; + vbus-supply = <&ucs1002>; status = "okay"; }; @@ -480,6 +512,8 @@ }; &usdhc1 { + assigned-clocks = <&clk IMX8MQ_CLK_USDHC1>; + assigned-clock-rates = <400000000>; pinctrl-names = "default", "state_100mhz", "state_200mhz"; pinctrl-0 = <&pinctrl_usdhc1>; pinctrl-1 = <&pinctrl_usdhc1_100mhz>; @@ -493,6 +527,8 @@ }; &usdhc2 { + assigned-clocks = <&clk IMX8MQ_CLK_USDHC2>; + assigned-clock-rates = <200000000>; pinctrl-names = "default", "state_100mhz", "state_200mhz"; pinctrl-0 = <&pinctrl_usdhc2>; pinctrl-1 = <&pinctrl_usdhc2_100mhz>; @@ -507,6 +543,12 @@ }; &iomuxc { + pinctrl_accel: accelgrp { + fsl,pins = < + MX8MQ_IOMUXC_SAI5_RXC_GPIO3_IO20 0x41 + >; + }; + pinctrl_fec1: fec1grp { fsl,pins = < MX8MQ_IOMUXC_ENET_MDC_ENET1_MDC 0x3 @@ -532,6 +574,7 @@ fsl,pins = < MX8MQ_IOMUXC_NAND_DATA04_GPIO3_IO10 0x6 MX8MQ_IOMUXC_NAND_DATA05_GPIO3_IO11 0x6 + MX8MQ_IOMUXC_NAND_DATA06_GPIO3_IO12 0x6 MX8MQ_IOMUXC_NAND_DATA07_GPIO3_IO13 0x6 >; }; @@ -597,12 +640,6 @@ >; }; - pinctrl_reg_user_usb: reguserusbgrp { - fsl,pins = < - MX8MQ_IOMUXC_NAND_DATA06_GPIO3_IO12 0x6 - >; - }; - pinctrl_switch_irq: switchgrp { fsl,pins = < MX8MQ_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x41 @@ -630,6 +667,13 @@ >; }; + pinctrl_ucs1002: ucs1002grp { + fsl,pins = < + MX8MQ_IOMUXC_NAND_WE_B_GPIO3_IO17 0x41 + MX8MQ_IOMUXC_NAND_WP_B_GPIO3_IO18 0x41 + >; + }; + pinctrl_usbhub: usbhubgrp { fsl,pins = < MX8MQ_IOMUXC_SAI5_MCLK_GPIO3_IO25 0x41 diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi index 52aae341d0da..6a1e83922c71 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi @@ -156,6 +156,7 @@ /* Industrial only */ opp-supported-hw = <0xf>, <0x4>; clock-latency-ns = <150000>; + opp-suspend; }; opp-1000000000 { @@ -164,21 +165,23 @@ /* Consumer only */ opp-supported-hw = <0xe>, <0x3>; clock-latency-ns = <150000>; + opp-suspend; }; opp-1300000000 { opp-hz = /bits/ 64 <1300000000>; opp-microvolt = <1000000>; - opp-supported-hw = <0xc>, <0x7>; + opp-supported-hw = <0xc>, <0x4>; clock-latency-ns = <150000>; + opp-suspend; }; opp-1500000000 { opp-hz = /bits/ 64 <1500000000>; opp-microvolt = <1000000>; - /* Consumer only but rely on speed grading */ - opp-supported-hw = <0x8>, <0x7>; + opp-supported-hw = <0x8>, <0x3>; clock-latency-ns = <150000>; + opp-suspend; }; }; @@ -232,12 +235,26 @@ thermal-sensors = <&tmu 1>; trips { + gpu_alert: gpu-alert { + temperature = <80000>; + hysteresis = <2000>; + type = "passive"; + }; + gpu-crit { temperature = <90000>; hysteresis = <2000>; type = "critical"; }; }; + + cooling-maps { + map0 { + trip = <&gpu_alert>; + cooling-device = + <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; }; vpu-thermal { @@ -273,11 +290,67 @@ dma-ranges = <0x40000000 0x0 0x40000000 0xc0000000>; bus@30000000 { /* AIPS1 */ - compatible = "fsl,imx8mq-aips-bus", "simple-bus"; + compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x30000000 0x30000000 0x400000>; + sai1: sai@30010000 { + #sound-dai-cells = <0>; + compatible = "fsl,imx8mq-sai"; + reg = <0x30010000 0x10000>; + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MQ_CLK_SAI1_IPG>, + <&clk IMX8MQ_CLK_SAI1_ROOT>, + <&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_CLK_DUMMY>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; + dmas = <&sdma2 8 24 0>, <&sdma1 9 24 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + sai6: sai@30030000 { + #sound-dai-cells = <0>; + compatible = "fsl,imx8mq-sai"; + reg = <0x30030000 0x10000>; + interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MQ_CLK_SAI6_IPG>, + <&clk IMX8MQ_CLK_SAI6_ROOT>, + <&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_CLK_DUMMY>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; + dmas = <&sdma2 4 24 0>, <&sdma2 5 24 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + sai5: sai@30040000 { + #sound-dai-cells = <0>; + compatible = "fsl,imx8mq-sai"; + reg = <0x30040000 0x10000>; + interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MQ_CLK_SAI5_IPG>, + <&clk IMX8MQ_CLK_SAI5_ROOT>, + <&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_CLK_DUMMY>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; + dmas = <&sdma2 2 24 0>, <&sdma2 3 24 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + sai4: sai@30050000 { + #sound-dai-cells = <0>; + compatible = "fsl,imx8mq-sai"; + reg = <0x30050000 0x10000>; + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MQ_CLK_SAI4_IPG>, + <&clk IMX8MQ_CLK_SAI4_ROOT>, + <&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_CLK_DUMMY>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; + dmas = <&sdma2 0 24 0>, <&sdma2 1 24 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + gpio1: gpio@30200000 { compatible = "fsl,imx8mq-gpio", "fsl,imx35-gpio"; reg = <0x30200000 0x10000>; @@ -288,6 +361,7 @@ #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; + gpio-ranges = <&iomuxc 0 10 30>; }; gpio2: gpio@30210000 { @@ -300,6 +374,7 @@ #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; + gpio-ranges = <&iomuxc 0 40 21>; }; gpio3: gpio@30220000 { @@ -312,6 +387,7 @@ #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; + gpio-ranges = <&iomuxc 0 61 26>; }; gpio4: gpio@30230000 { @@ -324,6 +400,7 @@ #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; + gpio-ranges = <&iomuxc 0 87 32>; }; gpio5: gpio@30240000 { @@ -336,12 +413,14 @@ #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; + gpio-ranges = <&iomuxc 0 119 30>; }; tmu: tmu@30260000 { compatible = "fsl,imx8mq-tmu"; reg = <0x30260000 0x10000>; interrupt = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MQ_CLK_TMU_ROOT>; little-endian; fsl,tmu-range = <0xb0000 0xa0026 0x80048 0x70061>; fsl,tmu-calibration = <0x00000000 0x00000023 @@ -425,14 +504,38 @@ fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin"; }; + lcdif: lcd-controller@30320000 { + compatible = "fsl,imx8mq-lcdif", "fsl,imx28-lcdif"; + reg = <0x30320000 0x10000>; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MQ_CLK_LCDIF_PIXEL>; + clock-names = "pix"; + assigned-clocks = <&clk IMX8MQ_VIDEO_PLL1_REF_SEL>, + <&clk IMX8MQ_VIDEO_PLL1_BYPASS>, + <&clk IMX8MQ_CLK_LCDIF_PIXEL>, + <&clk IMX8MQ_VIDEO_PLL1>; + assigned-clock-parents = <&clk IMX8MQ_CLK_25M>, + <&clk IMX8MQ_VIDEO_PLL1>, + <&clk IMX8MQ_VIDEO_PLL1_OUT>; + assigned-clock-rates = <0>, <0>, <0>, <594000000>; + status = "disabled"; + }; + iomuxc: iomuxc@30330000 { compatible = "fsl,imx8mq-iomuxc"; reg = <0x30330000 0x10000>; }; iomuxc_gpr: syscon@30340000 { - compatible = "fsl,imx8mq-iomuxc-gpr", "fsl,imx6q-iomuxc-gpr", "syscon"; + compatible = "fsl,imx8mq-iomuxc-gpr", "fsl,imx6q-iomuxc-gpr", + "syscon", "simple-mfd"; reg = <0x30340000 0x10000>; + + mux: mux-controller { + compatible = "mmio-mux"; + #mux-control-cells = <1>; + mux-reg-masks = <0x34 0x00000004>; /* MIPI_MUX_SEL */ + }; }; ocotp: ocotp-ctrl@30350000 { @@ -489,6 +592,8 @@ clock-names = "ckil", "osc_25m", "osc_27m", "clk_ext1", "clk_ext2", "clk_ext3", "clk_ext4"; + assigned-clocks = <&clk IMX8MQ_CLK_NOC>; + assigned-clock-rates = <800000000>; }; src: reset-controller@30390000 { @@ -587,7 +692,7 @@ }; bus@30400000 { /* AIPS2 */ - compatible = "fsl,imx8mq-aips-bus", "simple-bus"; + compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x30400000 0x30400000 0x400000>; @@ -635,10 +740,18 @@ #pwm-cells = <2>; status = "disabled"; }; + + system_counter: timer@306a0000 { + compatible = "nxp,sysctr-timer"; + reg = <0x306a0000 0x20000>; + interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&osc_25m>; + clock-names = "per"; + }; }; bus@30800000 { /* AIPS3 */ - compatible = "fsl,imx8mq-aips-bus", "simple-bus"; + compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x30800000 0x30800000 0x400000>, @@ -727,6 +840,63 @@ status = "disabled"; }; + sai3: sai@308c0000 { + #sound-dai-cells = <0>; + compatible = "fsl,imx8mq-sai"; + reg = <0x308c0000 0x10000>; + interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MQ_CLK_SAI3_IPG>, + <&clk IMX8MQ_CLK_SAI3_ROOT>, + <&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_CLK_DUMMY>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; + dmas = <&sdma1 12 24 0>, <&sdma1 13 24 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + crypto: crypto@30900000 { + compatible = "fsl,sec-v4.0"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x30900000 0x40000>; + ranges = <0 0x30900000 0x40000>; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MQ_CLK_AHB>, + <&clk IMX8MQ_CLK_IPG_ROOT>; + clock-names = "aclk", "ipg"; + + sec_jr0: jr@1000 { + compatible = "fsl,sec-v4.0-job-ring"; + reg = <0x1000 0x1000>; + interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; + }; + + sec_jr1: jr@2000 { + compatible = "fsl,sec-v4.0-job-ring"; + reg = <0x2000 0x1000>; + interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; + }; + + sec_jr2: jr@3000 { + compatible = "fsl,sec-v4.0-job-ring"; + reg = <0x3000 0x1000>; + interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + dphy: dphy@30a00300 { + compatible = "fsl,imx8mq-mipi-dphy"; + reg = <0x30a00300 0x100>; + clocks = <&clk IMX8MQ_CLK_DSI_PHY_REF>; + clock-names = "phy_ref"; + assigned-clocks = <&clk IMX8MQ_CLK_DSI_PHY_REF>; + assigned-clock-parents = <&clk IMX8MQ_VIDEO_PLL1_OUT>; + assigned-clock-rates = <24000000>; + #phy-cells = <0>; + power-domains = <&pgc_mipi>; + status = "disabled"; + }; + i2c1: i2c@30a20000 { compatible = "fsl,imx8mq-i2c", "fsl,imx21-i2c"; reg = <0x30a20000 0x10000>; @@ -783,12 +953,10 @@ "fsl,imx7d-usdhc"; reg = <0x30b40000 0x10000>; interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX8MQ_CLK_DUMMY>, + clocks = <&clk IMX8MQ_CLK_IPG_ROOT>, <&clk IMX8MQ_CLK_NAND_USDHC_BUS>, <&clk IMX8MQ_CLK_USDHC1_ROOT>; clock-names = "ipg", "ahb", "per"; - assigned-clocks = <&clk IMX8MQ_CLK_USDHC1>; - assigned-clock-rates = <400000000>; fsl,tuning-start-tap = <20>; fsl,tuning-step = <2>; bus-width = <4>; @@ -800,7 +968,7 @@ "fsl,imx7d-usdhc"; reg = <0x30b50000 0x10000>; interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX8MQ_CLK_DUMMY>, + clocks = <&clk IMX8MQ_CLK_IPG_ROOT>, <&clk IMX8MQ_CLK_NAND_USDHC_BUS>, <&clk IMX8MQ_CLK_USDHC2_ROOT>; clock-names = "ipg", "ahb", "per"; @@ -855,7 +1023,7 @@ }; bus@32c00000 { /* AIPS4 */ - compatible = "fsl,imx8mq-aips-bus", "simple-bus"; + compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x32c00000 0x32c00000 0x400000>; @@ -882,6 +1050,7 @@ <&clk IMX8MQ_CLK_GPU_AXI>, <&clk IMX8MQ_CLK_GPU_AHB>; clock-names = "core", "shader", "bus", "reg"; + #cooling-cells = <2>; assigned-clocks = <&clk IMX8MQ_CLK_GPU_CORE_SRC>, <&clk IMX8MQ_CLK_GPU_SHADER_SRC>, <&clk IMX8MQ_CLK_GPU_AXI>, @@ -900,9 +1069,9 @@ usb_dwc3_0: usb@38100000 { compatible = "fsl,imx8mq-dwc3", "snps,dwc3"; reg = <0x38100000 0x10000>; - clocks = <&clk IMX8MQ_CLK_USB_BUS>, + clocks = <&clk IMX8MQ_CLK_USB1_CTRL_ROOT>, <&clk IMX8MQ_CLK_USB_CORE_REF>, - <&clk IMX8MQ_CLK_USB1_CTRL_ROOT>; + <&clk IMX8MQ_CLK_32K>; clock-names = "bus_early", "ref", "suspend"; assigned-clocks = <&clk IMX8MQ_CLK_USB_BUS>, <&clk IMX8MQ_CLK_USB_CORE_REF>; @@ -932,9 +1101,9 @@ usb_dwc3_1: usb@38200000 { compatible = "fsl,imx8mq-dwc3", "snps,dwc3"; reg = <0x38200000 0x10000>; - clocks = <&clk IMX8MQ_CLK_USB_BUS>, + clocks = <&clk IMX8MQ_CLK_USB2_CTRL_ROOT>, <&clk IMX8MQ_CLK_USB_CORE_REF>, - <&clk IMX8MQ_CLK_USB2_CTRL_ROOT>; + <&clk IMX8MQ_CLK_32K>; clock-names = "bus_early", "ref", "suspend"; assigned-clocks = <&clk IMX8MQ_CLK_USB_BUS>, <&clk IMX8MQ_CLK_USB_CORE_REF>; @@ -1032,5 +1201,22 @@ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; interrupt-parent = <&gic>; }; + + ddrc: memory-controller@3d400000 { + compatible = "fsl,imx8mq-ddrc", "fsl,imx8m-ddrc"; + reg = <0x3d400000 0x400000>; + clock-names = "core", "pll", "alt", "apb"; + clocks = <&clk IMX8MQ_CLK_DRAM_CORE>, + <&clk IMX8MQ_DRAM_PLL_OUT>, + <&clk IMX8MQ_CLK_DRAM_ALT>, + <&clk IMX8MQ_CLK_DRAM_APB>; + }; + + ddr-pmu@3d800000 { + compatible = "fsl,imx8mq-ddr-pmu", "fsl,imx8m-ddr-pmu"; + reg = <0x3d800000 0x400000>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + }; }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-ai_ml.dts b/arch/arm64/boot/dts/freescale/imx8qxp-ai_ml.dts new file mode 100644 index 000000000000..a3f8cf195974 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8qxp-ai_ml.dts @@ -0,0 +1,253 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2018 Einfochips + * Copyright 2019 Linaro Ltd. + */ + +/dts-v1/; + +#include "imx8qxp.dtsi" + +/ { + model = "Einfochips i.MX8QXP AI_ML"; + compatible = "einfochips,imx8qxp-ai_ml", "fsl,imx8qxp"; + + aliases { + serial1 = &adma_lpuart1; + serial2 = &adma_lpuart2; + serial3 = &adma_lpuart3; + }; + + chosen { + stdout-path = &adma_lpuart2; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x00000000 0x80000000 0 0x80000000>; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_leds>; + + user-led1 { + label = "green:user1"; + gpios = <&lsio_gpio4 16 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + + user-led2 { + label = "green:user2"; + gpios = <&lsio_gpio0 6 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "none"; + }; + + user-led3 { + label = "green:user3"; + gpios = <&lsio_gpio0 7 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc1"; + default-state = "off"; + }; + + user-led4 { + label = "green:user4"; + gpios = <&lsio_gpio4 21 GPIO_ACTIVE_HIGH>; + panic-indicator; + linux,default-trigger = "none"; + }; + + wlan-active-led { + label = "yellow:wlan"; + gpios = <&lsio_gpio4 17 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "phy0tx"; + default-state = "off"; + }; + + bt-active-led { + label = "blue:bt"; + gpios = <&lsio_gpio4 18 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "hci0-power"; + default-state = "off"; + }; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wifi_reg_on>; + reset-gpios = <&lsio_gpio3 24 GPIO_ACTIVE_LOW>; + }; +}; + +/* BT */ +&adma_lpuart0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpuart0>; + uart-has-rtscts; + status = "okay"; +}; + +/* LS-UART0 */ +&adma_lpuart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpuart1>; + status = "okay"; +}; + +/* Debug */ +&adma_lpuart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpuart2>; + status = "okay"; +}; + +/* PCI-E UART */ +&adma_lpuart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpuart3>; + status = "okay"; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1>; + phy-mode = "rgmii-id"; + phy-handle = <ðphy0>; + fsl,magic-packet; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + }; + }; +}; + +/* WiFi */ +&usdhc1 { + #address-cells = <1>; + #size-cells = <0>; + assigned-clocks = <&clk IMX_CONN_SDHC0_CLK>; + assigned-clock-rates = <200000000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + bus-width = <4>; + no-sd; + non-removable; + mmc-pwrseq = <&sdio_pwrseq>; + status = "okay"; + + brcmf: wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + }; +}; + +/* SD */ +&usdhc2 { + assigned-clocks = <&clk IMX_CONN_SDHC1_CLK>; + assigned-clock-rates = <200000000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + bus-width = <4>; + cd-gpios = <&lsio_gpio4 22 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&iomuxc { + pinctrl_fec1: fec1grp { + fsl,pins = < + IMX8QXP_ENET0_MDC_CONN_ENET0_MDC 0x06000020 + IMX8QXP_ENET0_MDIO_CONN_ENET0_MDIO 0x06000020 + IMX8QXP_ENET0_RGMII_TX_CTL_CONN_ENET0_RGMII_TX_CTL 0x06000020 + IMX8QXP_ENET0_RGMII_TXC_CONN_ENET0_RGMII_TXC 0x06000020 + IMX8QXP_ENET0_RGMII_TXD0_CONN_ENET0_RGMII_TXD0 0x06000020 + IMX8QXP_ENET0_RGMII_TXD1_CONN_ENET0_RGMII_TXD1 0x06000020 + IMX8QXP_ENET0_RGMII_TXD2_CONN_ENET0_RGMII_TXD2 0x06000020 + IMX8QXP_ENET0_RGMII_TXD3_CONN_ENET0_RGMII_TXD3 0x06000020 + IMX8QXP_ENET0_RGMII_RXC_CONN_ENET0_RGMII_RXC 0x06000020 + IMX8QXP_ENET0_RGMII_RX_CTL_CONN_ENET0_RGMII_RX_CTL 0x06000020 + IMX8QXP_ENET0_RGMII_RXD0_CONN_ENET0_RGMII_RXD0 0x06000020 + IMX8QXP_ENET0_RGMII_RXD1_CONN_ENET0_RGMII_RXD1 0x06000020 + IMX8QXP_ENET0_RGMII_RXD2_CONN_ENET0_RGMII_RXD2 0x06000020 + IMX8QXP_ENET0_RGMII_RXD3_CONN_ENET0_RGMII_RXD3 0x06000020 + >; + }; + + pinctrl_leds: ledsgrp{ + fsl,pins = < + IMX8QXP_ESAI0_TX2_RX3_LSIO_GPIO0_IO06 0x00000021 + IMX8QXP_ESAI0_TX3_RX2_LSIO_GPIO0_IO07 0x00000021 + IMX8QXP_EMMC0_DATA7_LSIO_GPIO4_IO16 0x00000021 + IMX8QXP_USDHC1_WP_LSIO_GPIO4_IO21 0x00000021 + IMX8QXP_EMMC0_STROBE_LSIO_GPIO4_IO17 0x00000021 + IMX8QXP_EMMC0_RESET_B_LSIO_GPIO4_IO18 0x00000021 + >; + }; + + pinctrl_lpuart0: lpuart0grp { + fsl,pins = < + IMX8QXP_UART0_RX_ADMA_UART0_RX 0X06000020 + IMX8QXP_UART0_TX_ADMA_UART0_TX 0X06000020 + IMX8QXP_FLEXCAN0_TX_ADMA_UART0_CTS_B 0x06000020 + IMX8QXP_FLEXCAN0_RX_ADMA_UART0_RTS_B 0x06000020 + >; + }; + + pinctrl_lpuart1: lpuart1grp { + fsl,pins = < + IMX8QXP_UART1_RX_ADMA_UART1_RX 0X06000020 + IMX8QXP_UART1_TX_ADMA_UART1_TX 0X06000020 + >; + }; + + pinctrl_lpuart2: lpuart2grp { + fsl,pins = < + IMX8QXP_UART2_RX_ADMA_UART2_RX 0X06000020 + IMX8QXP_UART2_TX_ADMA_UART2_TX 0X06000020 + >; + }; + + pinctrl_lpuart3: lpuart3grp { + fsl,pins = < + IMX8QXP_FLEXCAN2_RX_ADMA_UART3_RX 0X06000020 + IMX8QXP_FLEXCAN2_TX_ADMA_UART3_TX 0X06000020 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + IMX8QXP_EMMC0_CLK_CONN_EMMC0_CLK 0x06000041 + IMX8QXP_EMMC0_CMD_CONN_EMMC0_CMD 0x00000021 + IMX8QXP_EMMC0_DATA0_CONN_EMMC0_DATA0 0x00000021 + IMX8QXP_EMMC0_DATA1_CONN_EMMC0_DATA1 0x00000021 + IMX8QXP_EMMC0_DATA2_CONN_EMMC0_DATA2 0x00000021 + IMX8QXP_EMMC0_DATA3_CONN_EMMC0_DATA3 0x00000021 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + IMX8QXP_USDHC1_CLK_CONN_USDHC1_CLK 0x06000041 + IMX8QXP_USDHC1_CMD_CONN_USDHC1_CMD 0x00000021 + IMX8QXP_USDHC1_DATA0_CONN_USDHC1_DATA0 0x00000021 + IMX8QXP_USDHC1_DATA1_CONN_USDHC1_DATA1 0x00000021 + IMX8QXP_USDHC1_DATA2_CONN_USDHC1_DATA2 0x00000021 + IMX8QXP_USDHC1_DATA3_CONN_USDHC1_DATA3 0x00000021 + IMX8QXP_USDHC1_VSELECT_CONN_USDHC1_VSELECT 0x00000021 + IMX8QXP_USDHC1_CD_B_LSIO_GPIO4_IO22 0x00000021 + >; + }; + + pinctrl_wifi_reg_on: wifiregongrp { + fsl,pins = < + IMX8QXP_QSPI0B_SS1_B_LSIO_GPIO3_IO24 0x00000021 + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-colibri-eval-v3.dts b/arch/arm64/boot/dts/freescale/imx8qxp-colibri-eval-v3.dts new file mode 100644 index 000000000000..6b21a295c126 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8qxp-colibri-eval-v3.dts @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +/* + * Copyright 2019 Toradex + */ + +/dts-v1/; + +#include "imx8qxp-colibri.dtsi" +#include "imx8qxp-colibri-eval-v3.dtsi" + +/ { + model = "Toradex Colibri iMX8QXP/DX on Colibri Evaluation Board V3"; + compatible = "toradex,colibri-imx8x-eval-v3", + "toradex,colibri-imx8x", "fsl,imx8qxp"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-colibri-eval-v3.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp-colibri-eval-v3.dtsi new file mode 100644 index 000000000000..c7336f387605 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8qxp-colibri-eval-v3.dtsi @@ -0,0 +1,62 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +/* + * Copyright 2019 Toradex + */ + +#include "dt-bindings/input/linux-event-codes.h" + +/ { + aliases { + rtc0 = &rtc_i2c; + rtc1 = &rtc; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpiokeys>; + + wakeup { + label = "Wake-Up"; + gpios = <&lsio_gpio3 10 GPIO_ACTIVE_HIGH>; + linux,code = <KEY_WAKEUP>; + debounce-interval = <10>; + wakeup-source; + }; + }; +}; + +&adma_i2c1 { + status = "okay"; + + /* M41T0M6 real time clock on carrier board */ + rtc_i2c: rtc@68 { + compatible = "st,m41t0"; + reg = <0x68>; + }; +}; + +/* Colibri UART_B */ +&adma_lpuart0 { + status= "okay"; +}; + +/* Colibri UART_C */ +&adma_lpuart2 { + status= "okay"; +}; + +/* Colibri UART_A */ +&adma_lpuart3 { + status= "okay"; +}; + +/* Colibri FastEthernet */ +&fec1 { + status = "okay"; +}; + +/* Colibri SD/MMC Card */ +&usdhc2 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-colibri.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp-colibri.dtsi new file mode 100644 index 000000000000..75f17a29f81e --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8qxp-colibri.dtsi @@ -0,0 +1,598 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +/* + * Copyright 2019 Toradex + */ + +#include "imx8qxp.dtsi" + +/ { + model = "Toradex Colibri iMX8QXP/DX Module"; + compatible = "toradex,colibri-imx8x", "fsl,imx8qxp"; + + chosen { + stdout-path = &adma_lpuart3; + }; + + reg_module_3v3: regulator-module-3v3 { + compatible = "regulator-fixed"; + regulator-name = "+V3.3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +/* On-module I2C */ +&adma_i2c0 { + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c0>, <&pinctrl_sgtl5000_usb_clk>; + status = "okay"; + + /* Touch controller */ + touchscreen@2c { + compatible = "adi,ad7879-1"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ad7879_int>; + reg = <0x2c>; + interrupt-parent = <&lsio_gpio3>; + interrupts = <5 IRQ_TYPE_EDGE_FALLING>; + touchscreen-max-pressure = <4096>; + adi,resistance-plate-x = <120>; + adi,first-conversion-delay = /bits/ 8 <3>; + adi,acquisition-time = /bits/ 8 <1>; + adi,median-filter-size = /bits/ 8 <2>; + adi,averaging = /bits/ 8 <1>; + adi,conversion-interval = /bits/ 8 <255>; + }; +}; + +/* Colibri I2C */ +&adma_i2c1 { + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; +}; + +/* Colibri UART_B */ +&adma_lpuart0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpuart0>; +}; + +/* Colibri UART_C */ +&adma_lpuart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpuart2>; +}; + +/* Colibri UART_A */ +&adma_lpuart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpuart3>, <&pinctrl_lpuart3_ctrl>; +}; + +/* Colibri FastEthernet */ +&fec1 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&pinctrl_fec1>; + pinctrl-1 = <&pinctrl_fec1_sleep>; + phy-mode = "rmii"; + phy-handle = <ðphy0>; + fsl,magic-packet; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@2 { + compatible = "ethernet-phy-ieee802.3-c22"; + max-speed = <100>; + reg = <2>; + }; + }; +}; + +/* On-module eMMC */ +&usdhc1 { + bus-width = <8>; + non-removable; + no-sd; + no-sdio; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + status = "okay"; +}; + +/* Colibri SD/MMC Card */ +&usdhc2 { + bus-width = <4>; + cd-gpios = <&lsio_gpio3 9 GPIO_ACTIVE_LOW>; + vmmc-supply = <®_module_3v3>; + pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep"; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; + pinctrl-3 = <&pinctrl_usdhc2_sleep>, <&pinctrl_usdhc2_gpio_sleep>; + disable-wp; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ext_io0>, <&pinctrl_hog0>, <&pinctrl_hog1>; + + /* On-module touch pen-down interrupt */ + pinctrl_ad7879_int: ad7879intgrp { + fsl,pins = < + IMX8QXP_MIPI_CSI0_I2C0_SCL_LSIO_GPIO3_IO05 0x21 + >; + }; + + /* Colibri Analogue Inputs */ + pinctrl_adc0: adc0grp { + fsl,pins = < + IMX8QXP_ADC_IN0_ADMA_ADC_IN0 0x60 /* SODIMM 8 */ + IMX8QXP_ADC_IN1_ADMA_ADC_IN1 0x60 /* SODIMM 6 */ + IMX8QXP_ADC_IN4_ADMA_ADC_IN4 0x60 /* SODIMM 4 */ + IMX8QXP_ADC_IN5_ADMA_ADC_IN5 0x60 /* SODIMM 2 */ + >; + }; + + pinctrl_can_int: canintgrp { + fsl,pins = < + IMX8QXP_QSPI0A_DQS_LSIO_GPIO3_IO13 0x40 /* SODIMM 73 */ + >; + }; + + pinctrl_csi_ctl: csictlgrp { + fsl,pins = < + IMX8QXP_QSPI0A_SS0_B_LSIO_GPIO3_IO14 0x20 /* SODIMM 77 */ + IMX8QXP_QSPI0A_SS1_B_LSIO_GPIO3_IO15 0x20 /* SODIMM 89 */ + >; + }; + + pinctrl_ext_io0: extio0grp { + fsl,pins = < + IMX8QXP_ENET0_RGMII_RXD3_LSIO_GPIO5_IO08 0x06000040 /* SODIMM 135 */ + >; + }; + + /* Colibri Ethernet: On-module 100Mbps PHY Micrel KSZ8041 */ + pinctrl_fec1: fec1grp { + fsl,pins = < + IMX8QXP_ENET0_MDC_CONN_ENET0_MDC 0x06000020 + IMX8QXP_ENET0_MDIO_CONN_ENET0_MDIO 0x06000020 + IMX8QXP_ENET0_RGMII_TX_CTL_CONN_ENET0_RGMII_TX_CTL 0x61 + IMX8QXP_ENET0_RGMII_TXC_CONN_ENET0_RCLK50M_OUT 0x06000061 + IMX8QXP_ENET0_RGMII_TXD0_CONN_ENET0_RGMII_TXD0 0x61 + IMX8QXP_ENET0_RGMII_TXD1_CONN_ENET0_RGMII_TXD1 0x61 + IMX8QXP_ENET0_RGMII_RX_CTL_CONN_ENET0_RGMII_RX_CTL 0x61 + IMX8QXP_ENET0_RGMII_RXD0_CONN_ENET0_RGMII_RXD0 0x61 + IMX8QXP_ENET0_RGMII_RXD1_CONN_ENET0_RGMII_RXD1 0x61 + IMX8QXP_ENET0_RGMII_RXD2_CONN_ENET0_RMII_RX_ER 0x61 + >; + }; + + pinctrl_fec1_sleep: fec1slpgrp { + fsl,pins = < + IMX8QXP_ENET0_MDC_LSIO_GPIO5_IO11 0x06000041 + IMX8QXP_ENET0_MDIO_LSIO_GPIO5_IO10 0x06000041 + IMX8QXP_ENET0_RGMII_TX_CTL_LSIO_GPIO4_IO30 0x41 + IMX8QXP_ENET0_RGMII_TXC_LSIO_GPIO4_IO29 0x41 + IMX8QXP_ENET0_RGMII_TXD0_LSIO_GPIO4_IO31 0x41 + IMX8QXP_ENET0_RGMII_TXD1_LSIO_GPIO5_IO00 0x41 + IMX8QXP_ENET0_RGMII_RX_CTL_LSIO_GPIO5_IO04 0x41 + IMX8QXP_ENET0_RGMII_RXD0_LSIO_GPIO5_IO05 0x41 + IMX8QXP_ENET0_RGMII_RXD1_LSIO_GPIO5_IO06 0x41 + IMX8QXP_ENET0_RGMII_RXD2_LSIO_GPIO5_IO07 0x41 + >; + }; + + /* Colibri optional CAN on UART_B RTS/CTS */ + pinctrl_flexcan1: flexcan0grp { + fsl,pins = < + IMX8QXP_FLEXCAN0_TX_ADMA_FLEXCAN0_TX 0x21 /* SODIMM 32 */ + IMX8QXP_FLEXCAN0_RX_ADMA_FLEXCAN0_RX 0x21 /* SODIMM 34 */ + >; + }; + + /* Colibri optional CAN on PS2 */ + pinctrl_flexcan2: flexcan1grp { + fsl,pins = < + IMX8QXP_FLEXCAN1_TX_ADMA_FLEXCAN1_TX 0x21 /* SODIMM 55 */ + IMX8QXP_FLEXCAN1_RX_ADMA_FLEXCAN1_RX 0x21 /* SODIMM 63 */ + >; + }; + + /* Colibri optional CAN on UART_A TXD/RXD */ + pinctrl_flexcan3: flexcan2grp { + fsl,pins = < + IMX8QXP_FLEXCAN2_TX_ADMA_FLEXCAN2_TX 0x21 /* SODIMM 35 */ + IMX8QXP_FLEXCAN2_RX_ADMA_FLEXCAN2_RX 0x21 /* SODIMM 33 */ + >; + }; + + /* Colibri LCD Back-Light GPIO */ + pinctrl_gpio_bl_on: gpioblongrp { + fsl,pins = < + IMX8QXP_QSPI0A_DATA3_LSIO_GPIO3_IO12 0x60 /* SODIMM 71 */ + >; + }; + + pinctrl_gpiokeys: gpiokeysgrp { + fsl,pins = < + IMX8QXP_QSPI0A_DATA1_LSIO_GPIO3_IO10 0x06700041 /* SODIMM 45 */ + >; + }; + + pinctrl_hog0: hog0grp { + fsl,pins = < + IMX8QXP_ENET0_RGMII_TXD3_LSIO_GPIO5_IO02 0x06000020 /* SODIMM 65 */ + IMX8QXP_CSI_D07_CI_PI_D09 0x61 /* SODIMM 65 */ + IMX8QXP_QSPI0A_DATA2_LSIO_GPIO3_IO11 0x20 /* SODIMM 69 */ + IMX8QXP_SAI0_TXC_LSIO_GPIO0_IO26 0x20 /* SODIMM 79 */ + IMX8QXP_CSI_D02_CI_PI_D04 0x61 /* SODIMM 79 */ + IMX8QXP_ENET0_RGMII_RXC_LSIO_GPIO5_IO03 0x06000020 /* SODIMM 85 */ + IMX8QXP_CSI_D06_CI_PI_D08 0x61 /* SODIMM 85 */ + IMX8QXP_QSPI0B_SCLK_LSIO_GPIO3_IO17 0x20 /* SODIMM 95 */ + IMX8QXP_SAI0_RXD_LSIO_GPIO0_IO27 0x20 /* SODIMM 97 */ + IMX8QXP_CSI_D03_CI_PI_D05 0x61 /* SODIMM 97 */ + IMX8QXP_QSPI0B_DATA0_LSIO_GPIO3_IO18 0x20 /* SODIMM 99 */ + IMX8QXP_SAI0_TXFS_LSIO_GPIO0_IO28 0x20 /* SODIMM 101 */ + IMX8QXP_CSI_D00_CI_PI_D02 0x61 /* SODIMM 101 */ + IMX8QXP_SAI0_TXD_LSIO_GPIO0_IO25 0x20 /* SODIMM 103 */ + IMX8QXP_CSI_D01_CI_PI_D03 0x61 /* SODIMM 103 */ + IMX8QXP_QSPI0B_DATA1_LSIO_GPIO3_IO19 0x20 /* SODIMM 105 */ + IMX8QXP_QSPI0B_DATA2_LSIO_GPIO3_IO20 0x20 /* SODIMM 107 */ + IMX8QXP_USB_SS3_TC2_LSIO_GPIO4_IO05 0x20 /* SODIMM 127 */ + IMX8QXP_USB_SS3_TC3_LSIO_GPIO4_IO06 0x20 /* SODIMM 131 */ + IMX8QXP_USB_SS3_TC1_LSIO_GPIO4_IO04 0x20 /* SODIMM 133 */ + IMX8QXP_CSI_PCLK_LSIO_GPIO3_IO00 0x20 /* SODIMM 96 */ + IMX8QXP_QSPI0B_DATA3_LSIO_GPIO3_IO21 0x20 /* SODIMM 98 */ + IMX8QXP_SAI1_RXFS_LSIO_GPIO0_IO31 0x20 /* SODIMM 100 */ + IMX8QXP_QSPI0B_DQS_LSIO_GPIO3_IO22 0x20 /* SODIMM 102 */ + IMX8QXP_QSPI0B_SS0_B_LSIO_GPIO3_IO23 0x20 /* SODIMM 104 */ + IMX8QXP_QSPI0B_SS1_B_LSIO_GPIO3_IO24 0x20 /* SODIMM 106 */ + >; + }; + + pinctrl_hog1: hog1grp { + fsl,pins = < + IMX8QXP_CSI_MCLK_LSIO_GPIO3_IO01 0x20 /* SODIMM 75 */ + IMX8QXP_QSPI0A_SCLK_LSIO_GPIO3_IO16 0x20 /* SODIMM 93 */ + >; + }; + + /* + * This pin is used in the SCFW as a UART. Using it from + * Linux would require rewritting the SCFW board file. + */ + pinctrl_hog_scfw: hogscfwgrp { + fsl,pins = < + IMX8QXP_SCU_GPIO0_00_LSIO_GPIO2_IO03 0x20 /* SODIMM 144 */ + >; + }; + + /* On Module I2C */ + pinctrl_i2c0: i2c0grp { + fsl,pins = < + IMX8QXP_MIPI_CSI0_GPIO0_00_ADMA_I2C0_SCL 0x06000021 + IMX8QXP_MIPI_CSI0_GPIO0_01_ADMA_I2C0_SDA 0x06000021 + >; + }; + + /* MIPI DSI I2C accessible on SODIMM (X1) and FFC (X2) */ + pinctrl_i2c0_mipi_lvds0: i2c0mipilvds0grp { + fsl,pins = < + IMX8QXP_MIPI_DSI0_I2C0_SCL_MIPI_DSI0_I2C0_SCL 0xc6000020 /* SODIMM 140 */ + IMX8QXP_MIPI_DSI0_I2C0_SDA_MIPI_DSI0_I2C0_SDA 0xc6000020 /* SODIMM 142 */ + >; + }; + + /* MIPI CSI I2C accessible on SODIMM (X1) and FFC (X3) */ + pinctrl_i2c0_mipi_lvds1: i2c0mipilvds1grp { + fsl,pins = < + IMX8QXP_MIPI_DSI1_I2C0_SCL_MIPI_DSI1_I2C0_SCL 0xc6000020 /* SODIMM 186 */ + IMX8QXP_MIPI_DSI1_I2C0_SDA_MIPI_DSI1_I2C0_SDA 0xc6000020 /* SODIMM 188 */ + >; + }; + + /* Colibri I2C */ + pinctrl_i2c1: i2c1grp { + fsl,pins = < + IMX8QXP_MIPI_DSI0_GPIO0_00_ADMA_I2C1_SCL 0x06000021 /* SODIMM 196 */ + IMX8QXP_MIPI_DSI0_GPIO0_01_ADMA_I2C1_SDA 0x06000021 /* SODIMM 194 */ + >; + }; + + /* Colibri Parallel RGB LCD Interface */ + pinctrl_lcdif: lcdifgrp { + fsl,pins = < + IMX8QXP_MCLK_OUT0_ADMA_LCDIF_CLK 0x60 /* SODIMM 56 */ + IMX8QXP_SPI3_CS0_ADMA_LCDIF_HSYNC 0x60 /* SODIMM 68 */ + IMX8QXP_MCLK_IN0_ADMA_LCDIF_VSYNC 0x60 /* SODIMM 82 */ + IMX8QXP_MCLK_IN1_ADMA_LCDIF_EN 0x60 /* SODIMM 44 */ + IMX8QXP_USDHC1_RESET_B_LSIO_GPIO4_IO19 0x60 /* SODIMM 44 */ + IMX8QXP_ESAI0_FSR_ADMA_LCDIF_D00 0x60 /* SODIMM 76 */ + IMX8QXP_USDHC1_WP_LSIO_GPIO4_IO21 0x60 /* SODIMM 76 */ + IMX8QXP_ESAI0_FST_ADMA_LCDIF_D01 0x60 /* SODIMM 70 */ + IMX8QXP_ESAI0_SCKR_ADMA_LCDIF_D02 0x60 /* SODIMM 60 */ + IMX8QXP_ESAI0_SCKT_ADMA_LCDIF_D03 0x60 /* SODIMM 58 */ + IMX8QXP_ESAI0_TX0_ADMA_LCDIF_D04 0x60 /* SODIMM 78 */ + IMX8QXP_ESAI0_TX1_ADMA_LCDIF_D05 0x60 /* SODIMM 72 */ + IMX8QXP_ESAI0_TX2_RX3_ADMA_LCDIF_D06 0x60 /* SODIMM 80 */ + IMX8QXP_ESAI0_TX3_RX2_ADMA_LCDIF_D07 0x60 /* SODIMM 46 */ + IMX8QXP_ESAI0_TX4_RX1_ADMA_LCDIF_D08 0x60 /* SODIMM 62 */ + IMX8QXP_ESAI0_TX5_RX0_ADMA_LCDIF_D09 0x60 /* SODIMM 48 */ + IMX8QXP_SPDIF0_RX_ADMA_LCDIF_D10 0x60 /* SODIMM 74 */ + IMX8QXP_SPDIF0_TX_ADMA_LCDIF_D11 0x60 /* SODIMM 50 */ + IMX8QXP_SPDIF0_EXT_CLK_ADMA_LCDIF_D12 0x60 /* SODIMM 52 */ + IMX8QXP_SPI3_SCK_ADMA_LCDIF_D13 0x60 /* SODIMM 54 */ + IMX8QXP_SPI3_SDO_ADMA_LCDIF_D14 0x60 /* SODIMM 66 */ + IMX8QXP_SPI3_SDI_ADMA_LCDIF_D15 0x60 /* SODIMM 64 */ + IMX8QXP_SPI3_CS1_ADMA_LCDIF_D16 0x60 /* SODIMM 57 */ + IMX8QXP_ENET0_RGMII_TXD2_LSIO_GPIO5_IO01 0x60 /* SODIMM 57 */ + IMX8QXP_UART1_CTS_B_ADMA_LCDIF_D17 0x60 /* SODIMM 61 */ + >; + }; + + /* Colibri SPI */ + pinctrl_lpspi2: lpspi2grp { + fsl,pins = < + IMX8QXP_SPI2_CS0_LSIO_GPIO1_IO00 0x21 /* SODIMM 86 */ + IMX8QXP_SPI2_SDO_ADMA_SPI2_SDO 0x06000040 /* SODIMM 92 */ + IMX8QXP_SPI2_SDI_ADMA_SPI2_SDI 0x06000040 /* SODIMM 90 */ + IMX8QXP_SPI2_SCK_ADMA_SPI2_SCK 0x06000040 /* SODIMM 88 */ + >; + }; + + /* Colibri UART_B */ + pinctrl_lpuart0: lpuart0grp { + fsl,pins = < + IMX8QXP_UART0_RX_ADMA_UART0_RX 0x06000020 /* SODIMM 36 */ + IMX8QXP_UART0_TX_ADMA_UART0_TX 0x06000020 /* SODIMM 38 */ + IMX8QXP_FLEXCAN0_RX_ADMA_UART0_RTS_B 0x06000020 /* SODIMM 34 */ + IMX8QXP_FLEXCAN0_TX_ADMA_UART0_CTS_B 0x06000020 /* SODIMM 32 */ + >; + }; + + /* Colibri UART_C */ + pinctrl_lpuart2: lpuart2grp { + fsl,pins = < + IMX8QXP_UART2_RX_ADMA_UART2_RX 0x06000020 /* SODIMM 19 */ + IMX8QXP_UART2_TX_ADMA_UART2_TX 0x06000020 /* SODIMM 21 */ + >; + }; + + /* Colibri UART_A */ + pinctrl_lpuart3: lpuart3grp { + fsl,pins = < + IMX8QXP_FLEXCAN2_RX_ADMA_UART3_RX 0x06000020 /* SODIMM 33 */ + IMX8QXP_FLEXCAN2_TX_ADMA_UART3_TX 0x06000020 /* SODIMM 35 */ + >; + }; + + /* Colibri UART_A Control */ + pinctrl_lpuart3_ctrl: lpuart3ctrlgrp { + fsl,pins = < + IMX8QXP_MIPI_DSI1_GPIO0_01_LSIO_GPIO2_IO00 0x20 /* SODIMM 23 */ + IMX8QXP_SAI1_RXD_LSIO_GPIO0_IO29 0x20 /* SODIMM 25 */ + IMX8QXP_SAI1_RXC_LSIO_GPIO0_IO30 0x20 /* SODIMM 27 */ + IMX8QXP_CSI_RESET_LSIO_GPIO3_IO03 0x20 /* SODIMM 29 */ + IMX8QXP_USDHC1_CD_B_LSIO_GPIO4_IO22 0x20 /* SODIMM 31 */ + IMX8QXP_CSI_EN_LSIO_GPIO3_IO02 0x20 /* SODIMM 37 */ + >; + }; + + /* On module wifi module */ + pinctrl_pcieb: pciebgrp { + fsl,pins = < + IMX8QXP_PCIE_CTRL0_CLKREQ_B_LSIO_GPIO4_IO01 0x04000061 /* SODIMM 178 */ + IMX8QXP_PCIE_CTRL0_WAKE_B_LSIO_GPIO4_IO02 0x04000061 /* SODIMM 94 */ + IMX8QXP_PCIE_CTRL0_PERST_B_LSIO_GPIO4_IO00 0x60 /* SODIMM 81 */ + >; + }; + + /* Colibri PWM_A */ + pinctrl_pwm_a: pwmagrp { + /* both pins are connected together, reserve the unused CSI_D05 */ + fsl,pins = < + IMX8QXP_CSI_D05_CI_PI_D07 0x61 /* SODIMM 59 */ + IMX8QXP_SPI0_CS1_ADMA_LCD_PWM0_OUT 0x60 /* SODIMM 59 */ + >; + }; + + /* Colibri PWM_B */ + pinctrl_pwm_b: pwmbgrp { + fsl,pins = < + IMX8QXP_UART1_TX_LSIO_PWM0_OUT 0x60 /* SODIMM 28 */ + >; + }; + + /* Colibri PWM_C */ + pinctrl_pwm_c: pwmcgrp { + fsl,pins = < + IMX8QXP_UART1_RX_LSIO_PWM1_OUT 0x60 /* SODIMM 30 */ + >; + }; + + /* Colibri PWM_D */ + pinctrl_pwm_d: pwmdgrp { + /* both pins are connected together, reserve the unused CSI_D04 */ + fsl,pins = < + IMX8QXP_CSI_D04_CI_PI_D06 0x61 /* SODIMM 67 */ + IMX8QXP_UART1_RTS_B_LSIO_PWM2_OUT 0x60 /* SODIMM 67 */ + >; + }; + + /* On-module I2S */ + pinctrl_sai0: sai0grp { + fsl,pins = < + IMX8QXP_SPI0_SDI_ADMA_SAI0_TXD 0x06000040 + IMX8QXP_SPI0_CS0_ADMA_SAI0_RXD 0x06000040 + IMX8QXP_SPI0_SCK_ADMA_SAI0_TXC 0x06000040 + IMX8QXP_SPI0_SDO_ADMA_SAI0_TXFS 0x06000040 + >; + }; + + /* Colibri Audio Analogue Microphone GND */ + pinctrl_sgtl5000: sgtl5000grp { + fsl,pins = < + /* MIC GND EN */ + IMX8QXP_MIPI_CSI0_I2C0_SDA_LSIO_GPIO3_IO06 0x41 + >; + }; + + /* On-module SGTL5000 clock */ + pinctrl_sgtl5000_usb_clk: sgtl5000usbclkgrp { + fsl,pins = < + IMX8QXP_ADC_IN3_ADMA_ACM_MCLK_OUT0 0x21 + >; + }; + + /* On-module USB interrupt */ + pinctrl_usb3503a: usb3503agrp { + fsl,pins = < + IMX8QXP_MIPI_CSI0_MCLK_OUT_LSIO_GPIO3_IO04 0x61 + >; + }; + + /* Colibri USB Client Cable Detect */ + pinctrl_usbc_det: usbcdetgrp { + fsl,pins = < + IMX8QXP_ENET0_REFCLK_125M_25M_LSIO_GPIO5_IO09 0x06000040 /* SODIMM 137 */ + >; + }; + + /* USB Host Power Enable */ + pinctrl_usbh1_reg: usbh1reggrp { + fsl,pins = < + IMX8QXP_USB_SS3_TC0_LSIO_GPIO4_IO03 0x06000040 /* SODIMM 129 */ + >; + }; + + /* On-module eMMC */ + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + IMX8QXP_EMMC0_CLK_CONN_EMMC0_CLK 0x06000041 + IMX8QXP_EMMC0_CMD_CONN_EMMC0_CMD 0x21 + IMX8QXP_EMMC0_DATA0_CONN_EMMC0_DATA0 0x21 + IMX8QXP_EMMC0_DATA1_CONN_EMMC0_DATA1 0x21 + IMX8QXP_EMMC0_DATA2_CONN_EMMC0_DATA2 0x21 + IMX8QXP_EMMC0_DATA3_CONN_EMMC0_DATA3 0x21 + IMX8QXP_EMMC0_DATA4_CONN_EMMC0_DATA4 0x21 + IMX8QXP_EMMC0_DATA5_CONN_EMMC0_DATA5 0x21 + IMX8QXP_EMMC0_DATA6_CONN_EMMC0_DATA6 0x21 + IMX8QXP_EMMC0_DATA7_CONN_EMMC0_DATA7 0x21 + IMX8QXP_EMMC0_STROBE_CONN_EMMC0_STROBE 0x41 + IMX8QXP_EMMC0_RESET_B_CONN_EMMC0_RESET_B 0x21 + >; + }; + + pinctrl_usdhc1_100mhz: usdhc1grp100mhz { + fsl,pins = < + IMX8QXP_EMMC0_CLK_CONN_EMMC0_CLK 0x06000041 + IMX8QXP_EMMC0_CMD_CONN_EMMC0_CMD 0x21 + IMX8QXP_EMMC0_DATA0_CONN_EMMC0_DATA0 0x21 + IMX8QXP_EMMC0_DATA1_CONN_EMMC0_DATA1 0x21 + IMX8QXP_EMMC0_DATA2_CONN_EMMC0_DATA2 0x21 + IMX8QXP_EMMC0_DATA3_CONN_EMMC0_DATA3 0x21 + IMX8QXP_EMMC0_DATA4_CONN_EMMC0_DATA4 0x21 + IMX8QXP_EMMC0_DATA5_CONN_EMMC0_DATA5 0x21 + IMX8QXP_EMMC0_DATA6_CONN_EMMC0_DATA6 0x21 + IMX8QXP_EMMC0_DATA7_CONN_EMMC0_DATA7 0x21 + IMX8QXP_EMMC0_STROBE_CONN_EMMC0_STROBE 0x41 + IMX8QXP_EMMC0_RESET_B_CONN_EMMC0_RESET_B 0x21 + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1grp200mhz { + fsl,pins = < + IMX8QXP_EMMC0_CLK_CONN_EMMC0_CLK 0x06000041 + IMX8QXP_EMMC0_CMD_CONN_EMMC0_CMD 0x21 + IMX8QXP_EMMC0_DATA0_CONN_EMMC0_DATA0 0x21 + IMX8QXP_EMMC0_DATA1_CONN_EMMC0_DATA1 0x21 + IMX8QXP_EMMC0_DATA2_CONN_EMMC0_DATA2 0x21 + IMX8QXP_EMMC0_DATA3_CONN_EMMC0_DATA3 0x21 + IMX8QXP_EMMC0_DATA4_CONN_EMMC0_DATA4 0x21 + IMX8QXP_EMMC0_DATA5_CONN_EMMC0_DATA5 0x21 + IMX8QXP_EMMC0_DATA6_CONN_EMMC0_DATA6 0x21 + IMX8QXP_EMMC0_DATA7_CONN_EMMC0_DATA7 0x21 + IMX8QXP_EMMC0_STROBE_CONN_EMMC0_STROBE 0x41 + IMX8QXP_EMMC0_RESET_B_CONN_EMMC0_RESET_B 0x21 + >; + }; + + /* Colibri SD/MMC Card Detect */ + pinctrl_usdhc2_gpio: usdhc2gpiogrp { + fsl,pins = < + IMX8QXP_QSPI0A_DATA0_LSIO_GPIO3_IO09 0x06000021 /* SODIMM 43 */ + >; + }; + + pinctrl_usdhc2_gpio_sleep: usdhc2gpioslpgrp { + fsl,pins = < + IMX8QXP_QSPI0A_DATA0_LSIO_GPIO3_IO09 0x60 /* SODIMM 43 */ + >; + }; + + /* Colibri SD/MMC Card */ + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + IMX8QXP_USDHC1_CLK_CONN_USDHC1_CLK 0x06000041 /* SODIMM 47 */ + IMX8QXP_USDHC1_CMD_CONN_USDHC1_CMD 0x21 /* SODIMM 190 */ + IMX8QXP_USDHC1_DATA0_CONN_USDHC1_DATA0 0x21 /* SODIMM 192 */ + IMX8QXP_USDHC1_DATA1_CONN_USDHC1_DATA1 0x21 /* SODIMM 49 */ + IMX8QXP_USDHC1_DATA2_CONN_USDHC1_DATA2 0x21 /* SODIMM 51 */ + IMX8QXP_USDHC1_DATA3_CONN_USDHC1_DATA3 0x21 /* SODIMM 53 */ + IMX8QXP_USDHC1_VSELECT_CONN_USDHC1_VSELECT 0x21 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2grp100mhz { + fsl,pins = < + IMX8QXP_USDHC1_CLK_CONN_USDHC1_CLK 0x06000041 /* SODIMM 47 */ + IMX8QXP_USDHC1_CMD_CONN_USDHC1_CMD 0x21 /* SODIMM 190 */ + IMX8QXP_USDHC1_DATA0_CONN_USDHC1_DATA0 0x21 /* SODIMM 192 */ + IMX8QXP_USDHC1_DATA1_CONN_USDHC1_DATA1 0x21 /* SODIMM 49 */ + IMX8QXP_USDHC1_DATA2_CONN_USDHC1_DATA2 0x21 /* SODIMM 51 */ + IMX8QXP_USDHC1_DATA3_CONN_USDHC1_DATA3 0x21 /* SODIMM 53 */ + IMX8QXP_USDHC1_VSELECT_CONN_USDHC1_VSELECT 0x21 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2grp200mhz { + fsl,pins = < + IMX8QXP_USDHC1_CLK_CONN_USDHC1_CLK 0x06000041 /* SODIMM 47 */ + IMX8QXP_USDHC1_CMD_CONN_USDHC1_CMD 0x21 /* SODIMM 190 */ + IMX8QXP_USDHC1_DATA0_CONN_USDHC1_DATA0 0x21 /* SODIMM 192 */ + IMX8QXP_USDHC1_DATA1_CONN_USDHC1_DATA1 0x21 /* SODIMM 49 */ + IMX8QXP_USDHC1_DATA2_CONN_USDHC1_DATA2 0x21 /* SODIMM 51 */ + IMX8QXP_USDHC1_DATA3_CONN_USDHC1_DATA3 0x21 /* SODIMM 53 */ + IMX8QXP_USDHC1_VSELECT_CONN_USDHC1_VSELECT 0x21 + >; + }; + + pinctrl_usdhc2_sleep: usdhc2slpgrp { + fsl,pins = < + IMX8QXP_USDHC1_CLK_LSIO_GPIO4_IO23 0x60 /* SODIMM 47 */ + IMX8QXP_USDHC1_CMD_LSIO_GPIO4_IO24 0x60 /* SODIMM 190 */ + IMX8QXP_USDHC1_DATA0_LSIO_GPIO4_IO25 0x60 /* SODIMM 192 */ + IMX8QXP_USDHC1_DATA1_LSIO_GPIO4_IO26 0x60 /* SODIMM 49 */ + IMX8QXP_USDHC1_DATA2_LSIO_GPIO4_IO27 0x60 /* SODIMM 51 */ + IMX8QXP_USDHC1_DATA3_LSIO_GPIO4_IO28 0x60 /* SODIMM 53 */ + IMX8QXP_USDHC1_VSELECT_CONN_USDHC1_VSELECT 0x21 + >; + }; + + pinctrl_wifi: wifigrp { + fsl,pins = < + IMX8QXP_SCU_BOOT_MODE3_SCU_DSC_RTC_CLOCK_OUTPUT_32K 0x20 + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts index bfdada2db176..d3d26cca7d52 100644 --- a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts +++ b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts @@ -137,6 +137,8 @@ }; &usdhc1 { + assigned-clocks = <&clk IMX_CONN_SDHC0_CLK>; + assigned-clock-rates = <200000000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc1>; bus-width = <8>; @@ -147,6 +149,8 @@ }; &usdhc2 { + assigned-clocks = <&clk IMX_CONN_SDHC1_CLK>; + assigned-clock-rates = <200000000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc2>; bus-width = <4>; @@ -230,3 +234,11 @@ >; }; }; + +&adma_dsp { + status = "okay"; +}; + +&scu_key { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi index 05fa0b7f36bb..fb5f752b15fe 100644 --- a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi @@ -8,6 +8,7 @@ #include <dt-bindings/clock/imx8-clock.h> #include <dt-bindings/firmware/imx/rsrc.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/pinctrl/pads-imx8qxp.h> @@ -30,6 +31,9 @@ mmc2 = &usdhc3; mu1 = &lsio_mu1; serial0 = &adma_lpuart0; + serial1 = &adma_lpuart1; + serial2 = &adma_lpuart2; + serial3 = &adma_lpuart3; }; cpus { @@ -113,6 +117,17 @@ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; }; + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + dsp_reserved: dsp@92400000 { + reg = <0 0x92400000 0 0x2000000>; + no-map; + }; + }; + pmu { compatible = "arm,armv8-pmuv3"; interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>; @@ -160,6 +175,12 @@ #power-domain-cells = <1>; }; + scu_key: scu-key { + compatible = "fsl,imx8qxp-sc-key", "fsl,imx-sc-key"; + linux,keycodes = <KEY_POWER>; + status = "disabled"; + }; + rtc: rtc { compatible = "fsl,imx8qxp-sc-rtc"; }; @@ -204,13 +225,34 @@ #clock-cells = <1>; }; + adma_dsp: dsp@596e8000 { + compatible = "fsl,imx8qxp-dsp"; + reg = <0x596e8000 0x88000>; + clocks = <&adma_lpcg IMX_ADMA_LPCG_DSP_IPG_CLK>, + <&adma_lpcg IMX_ADMA_LPCG_OCRAM_IPG_CLK>, + <&adma_lpcg IMX_ADMA_LPCG_DSP_CORE_CLK>; + clock-names = "ipg", "ocram", "core"; + power-domains = <&pd IMX_SC_R_MU_13A>, + <&pd IMX_SC_R_MU_13B>, + <&pd IMX_SC_R_DSP>, + <&pd IMX_SC_R_DSP_RAM>; + mbox-names = "txdb0", "txdb1", + "rxdb0", "rxdb1"; + mboxes = <&lsio_mu13 2 0>, + <&lsio_mu13 2 1>, + <&lsio_mu13 3 0>, + <&lsio_mu13 3 1>; + memory-region = <&dsp_reserved>; + status = "disabled"; + }; + adma_lpuart0: serial@5a060000 { compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart"; reg = <0x5a060000 0x1000>; interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>; - interrupt-parent = <&gic>; - clocks = <&adma_lpcg IMX_ADMA_LPCG_UART0_BAUD_CLK>; - clock-names = "ipg"; + clocks = <&adma_lpcg IMX_ADMA_LPCG_UART0_IPG_CLK>, + <&adma_lpcg IMX_ADMA_LPCG_UART0_BAUD_CLK>; + clock-names = "ipg", "baud"; power-domains = <&pd IMX_SC_R_UART_0>; status = "disabled"; }; @@ -219,9 +261,9 @@ compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart"; reg = <0x5a070000 0x1000>; interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>; - interrupt-parent = <&gic>; - clocks = <&adma_lpcg IMX_ADMA_LPCG_UART1_BAUD_CLK>; - clock-names = "ipg"; + clocks = <&adma_lpcg IMX_ADMA_LPCG_UART1_IPG_CLK>, + <&adma_lpcg IMX_ADMA_LPCG_UART1_BAUD_CLK>; + clock-names = "ipg", "baud"; power-domains = <&pd IMX_SC_R_UART_1>; status = "disabled"; }; @@ -230,9 +272,9 @@ compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart"; reg = <0x5a080000 0x1000>; interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>; - interrupt-parent = <&gic>; - clocks = <&adma_lpcg IMX_ADMA_LPCG_UART2_BAUD_CLK>; - clock-names = "ipg"; + clocks = <&adma_lpcg IMX_ADMA_LPCG_UART2_IPG_CLK>, + <&adma_lpcg IMX_ADMA_LPCG_UART2_BAUD_CLK>; + clock-names = "ipg", "baud"; power-domains = <&pd IMX_SC_R_UART_2>; status = "disabled"; }; @@ -241,9 +283,9 @@ compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart"; reg = <0x5a090000 0x1000>; interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>; - interrupt-parent = <&gic>; - clocks = <&adma_lpcg IMX_ADMA_LPCG_UART3_BAUD_CLK>; - clock-names = "ipg"; + clocks = <&adma_lpcg IMX_ADMA_LPCG_UART3_IPG_CLK>, + <&adma_lpcg IMX_ADMA_LPCG_UART3_BAUD_CLK>; + clock-names = "ipg", "baud"; power-domains = <&pd IMX_SC_R_UART_3>; status = "disabled"; }; @@ -252,7 +294,6 @@ compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c"; reg = <0x5a800000 0x4000>; interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>; - interrupt-parent = <&gic>; clocks = <&adma_lpcg IMX_ADMA_LPCG_I2C0_CLK>; clock-names = "per"; assigned-clocks = <&clk IMX_ADMA_I2C0_CLK>; @@ -265,7 +306,6 @@ compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c"; reg = <0x5a810000 0x4000>; interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; - interrupt-parent = <&gic>; clocks = <&adma_lpcg IMX_ADMA_LPCG_I2C1_CLK>; clock-names = "per"; assigned-clocks = <&clk IMX_ADMA_I2C1_CLK>; @@ -278,7 +318,6 @@ compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c"; reg = <0x5a820000 0x4000>; interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>; - interrupt-parent = <&gic>; clocks = <&adma_lpcg IMX_ADMA_LPCG_I2C2_CLK>; clock-names = "per"; assigned-clocks = <&clk IMX_ADMA_I2C2_CLK>; @@ -291,7 +330,6 @@ compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c"; reg = <0x5a830000 0x4000>; interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>; - interrupt-parent = <&gic>; clocks = <&adma_lpcg IMX_ADMA_LPCG_I2C3_CLK>; clock-names = "per"; assigned-clocks = <&clk IMX_ADMA_I2C3_CLK>; @@ -315,30 +353,24 @@ usdhc1: mmc@5b010000 { compatible = "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc"; - interrupt-parent = <&gic>; interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>; reg = <0x5b010000 0x10000>; clocks = <&conn_lpcg IMX_CONN_LPCG_SDHC0_IPG_CLK>, <&conn_lpcg IMX_CONN_LPCG_SDHC0_PER_CLK>, <&conn_lpcg IMX_CONN_LPCG_SDHC0_HCLK>; clock-names = "ipg", "per", "ahb"; - assigned-clocks = <&clk IMX_CONN_SDHC0_CLK>; - assigned-clock-rates = <200000000>; power-domains = <&pd IMX_SC_R_SDHC_0>; status = "disabled"; }; usdhc2: mmc@5b020000 { compatible = "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc"; - interrupt-parent = <&gic>; interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>; reg = <0x5b020000 0x10000>; clocks = <&conn_lpcg IMX_CONN_LPCG_SDHC1_IPG_CLK>, <&conn_lpcg IMX_CONN_LPCG_SDHC1_PER_CLK>, <&conn_lpcg IMX_CONN_LPCG_SDHC1_HCLK>; clock-names = "ipg", "per", "ahb"; - assigned-clocks = <&clk IMX_CONN_SDHC1_CLK>; - assigned-clock-rates = <200000000>; power-domains = <&pd IMX_SC_R_SDHC_1>; fsl,tuning-start-tap = <20>; fsl,tuning-step= <2>; @@ -347,15 +379,12 @@ usdhc3: mmc@5b030000 { compatible = "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc"; - interrupt-parent = <&gic>; interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>; reg = <0x5b030000 0x10000>; clocks = <&conn_lpcg IMX_CONN_LPCG_SDHC2_IPG_CLK>, <&conn_lpcg IMX_CONN_LPCG_SDHC2_PER_CLK>, <&conn_lpcg IMX_CONN_LPCG_SDHC2_HCLK>; clock-names = "ipg", "per", "ahb"; - assigned-clocks = <&clk IMX_CONN_SDHC2_CLK>; - assigned-clock-rates = <200000000>; power-domains = <&pd IMX_SC_R_SDHC_2>; status = "disabled"; }; @@ -406,7 +435,6 @@ ddr-pmu@5c020000 { compatible = "fsl,imx8-ddr-pmu"; reg = <0x5c020000 0x10000>; - interrupt-parent = <&gic>; interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>; }; }; diff --git a/arch/arm64/boot/dts/freescale/s32v234-evb.dts b/arch/arm64/boot/dts/freescale/s32v234-evb.dts new file mode 100644 index 000000000000..4b802518cefc --- /dev/null +++ b/arch/arm64/boot/dts/freescale/s32v234-evb.dts @@ -0,0 +1,25 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright 2015-2016 Freescale Semiconductor, Inc. + * Copyright 2016-2017 NXP + */ + +/dts-v1/; +#include "s32v234.dtsi" + +/ { + model = "NXP S32V234-EVB2 Board"; + compatible = "fsl,s32v234-evb", "fsl,s32v234"; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/s32v234.dtsi b/arch/arm64/boot/dts/freescale/s32v234.dtsi new file mode 100644 index 000000000000..e746b9c48f7a --- /dev/null +++ b/arch/arm64/boot/dts/freescale/s32v234.dtsi @@ -0,0 +1,139 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright 2015-2016 Freescale Semiconductor, Inc. + * Copyright 2016-2018 NXP + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/memreserve/ 0x80000000 0x00010000; + +/ { + compatible = "fsl,s32v234"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + aliases { + serial0 = &uart0; + serial1 = &uart1; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x0>; + enable-method = "spin-table"; + cpu-release-addr = <0x0 0x80000000>; + next-level-cache = <&cluster0_l2_cache>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x1>; + enable-method = "spin-table"; + cpu-release-addr = <0x0 0x80000000>; + next-level-cache = <&cluster0_l2_cache>; + }; + + cpu2: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x100>; + enable-method = "spin-table"; + cpu-release-addr = <0x0 0x80000000>; + next-level-cache = <&cluster1_l2_cache>; + }; + + cpu3: cpu@101 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x101>; + enable-method = "spin-table"; + cpu-release-addr = <0x0 0x80000000>; + next-level-cache = <&cluster1_l2_cache>; + }; + + cluster0_l2_cache: l2-cache0 { + compatible = "cache"; + }; + + cluster1_l2_cache: l2-cache1 { + compatible = "cache"; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | + IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | + IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | + IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | + IRQ_TYPE_LEVEL_LOW)>; + /* clock-frequency might be modified by u-boot, depending on the + * chip version. + */ + clock-frequency = <10000000>; + }; + + gic: interrupt-controller@7d001000 { + compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0 0x7d001000 0 0x1000>, + <0 0x7d002000 0 0x2000>, + <0 0x7d004000 0 0x2000>, + <0 0x7d006000 0 0x2000>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | + IRQ_TYPE_LEVEL_HIGH)>; + }; + + soc { + #address-cells = <2>; + #size-cells = <2>; + compatible = "simple-bus"; + interrupt-parent = <&gic>; + ranges; + + aips0: aips-bus@40000000 { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&gic>; + reg = <0x0 0x40000000 0x0 0x7d000>; + ranges; + + uart0: serial@40053000 { + compatible = "fsl,s32v234-linflexuart"; + reg = <0x0 0x40053000 0x0 0x1000>; + interrupts = <GIC_SPI 59 IRQ_TYPE_EDGE_RISING>; + status = "disabled"; + }; + }; + + aips1: aips-bus@40080000 { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&gic>; + reg = <0x0 0x40080000 0x0 0x70000>; + ranges; + + uart1: serial@400bc000 { + compatible = "fsl,s32v234-linflexuart"; + reg = <0x0 0x400bc000 0x0 0x1000>; + interrupts = <GIC_SPI 60 IRQ_TYPE_EDGE_RISING>; + status = "disabled"; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dts b/arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dts index c563d3eb2d98..7d370dac4c85 100644 --- a/arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dts +++ b/arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dts @@ -170,6 +170,7 @@ }; &ir { + linux,rc-map-name = "rc-hisi-poplar"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi b/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi index 13821a0ff524..12bc1d3ed424 100644 --- a/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi @@ -564,7 +564,7 @@ #address-cells = <3>; #size-cells = <2>; device_type = "pci"; - bus-range = <0 15>; + bus-range = <0x00 0xff>; num-lanes = <1>; ranges = <0x81000000 0x0 0x00000000 0x4f00000 0x0 0x100000 0x82000000 0x0 0x3000000 0x3000000 0x0 0x01f00000>; diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi index 108e2a4227f6..2072b637b5af 100644 --- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi @@ -260,6 +260,7 @@ compatible = "hisilicon,hi6220-aoctrl", "syscon"; reg = <0x0 0xf7800000 0x0 0x2000>; #clock-cells = <1>; + #reset-cells = <1>; }; sys_ctrl: sys_ctrl@f7030000 { @@ -1021,6 +1022,43 @@ clock-names = "apb_pclk"; cpu = <&cpu7>; }; + + mali: gpu@f4080000 { + compatible = "hisilicon,hi6220-mali", "arm,mali-450"; + reg = <0x0 0xf4080000 0x0 0x00040000>; + interrupt-parent = <&gic>; + interrupts = <GIC_PPI 126 IRQ_TYPE_LEVEL_HIGH>, + <GIC_PPI 126 IRQ_TYPE_LEVEL_HIGH>, + <GIC_PPI 126 IRQ_TYPE_LEVEL_HIGH>, + <GIC_PPI 126 IRQ_TYPE_LEVEL_HIGH>, + <GIC_PPI 126 IRQ_TYPE_LEVEL_HIGH>, + <GIC_PPI 126 IRQ_TYPE_LEVEL_HIGH>, + <GIC_PPI 126 IRQ_TYPE_LEVEL_HIGH>, + <GIC_PPI 126 IRQ_TYPE_LEVEL_HIGH>, + <GIC_PPI 126 IRQ_TYPE_LEVEL_HIGH>, + <GIC_PPI 126 IRQ_TYPE_LEVEL_HIGH>, + <GIC_PPI 126 IRQ_TYPE_LEVEL_HIGH>; + + interrupt-names = "gp", + "gpmmu", + "pp", + "pp0", + "ppmmu0", + "pp1", + "ppmmu1", + "pp2", + "ppmmu2", + "pp3", + "ppmmu3"; + clocks = <&media_ctrl HI6220_G3D_CLK>, + <&media_ctrl HI6220_G3D_PCLK>; + clock-names = "core", "bus"; + assigned-clocks = <&media_ctrl HI6220_G3D_CLK>, + <&media_ctrl HI6220_G3D_PCLK>; + assigned-clock-rates = <500000000>, <144000000>; + reset-names = "ao_g3d", "media_g3d"; + resets = <&ao_ctrl AO_G3D>, <&media_ctrl MEDIA_G3D>; + }; }; }; diff --git a/arch/arm64/boot/dts/intel/Makefile b/arch/arm64/boot/dts/intel/Makefile index 1253af30da8e..40cb16e8c814 100644 --- a/arch/arm64/boot/dts/intel/Makefile +++ b/arch/arm64/boot/dts/intel/Makefile @@ -1,2 +1,3 @@ # SPDX-License-Identifier: GPL-2.0-only -dtb-$(CONFIG_ARCH_AGILEX) += socfpga_agilex_socdk.dtb +dtb-$(CONFIG_ARCH_AGILEX) += socfpga_agilex_socdk.dtb \ + socfpga_agilex_socdk_nand.dtb diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi b/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi index e4ceb3a73c81..e1d357eaad7c 100644 --- a/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi +++ b/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi @@ -12,6 +12,19 @@ #address-cells = <2>; #size-cells = <2>; + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + service_reserved: svcbuffer@0 { + compatible = "shared-dma-pool"; + reg = <0x0 0x0 0x0 0x1000000>; + alignment = <0x1000>; + no-map; + }; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -47,10 +60,10 @@ pmu { compatible = "arm,armv8-pmuv3"; - interrupts = <0 120 8>, - <0 121 8>, - <0 122 8>, - <0 123 8>; + interrupts = <0 170 4>, + <0 171 4>, + <0 172 4>, + <0 173 4>; interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, @@ -81,6 +94,13 @@ interrupt-parent = <&intc>; ranges = <0 0 0 0xffffffff>; + base_fpga_region { + #address-cells = <0x1>; + #size-cells = <0x1>; + compatible = "fpga-region"; + fpga-mgr = <&fpga_mgr>; + }; + gmac0: ethernet@ff800000 { compatible = "altr,socfpga-stmmac", "snps,dwmac-3.74a", "snps,dwmac"; reg = <0xff800000 0x2000>; @@ -93,6 +113,7 @@ rx-fifo-depth = <16384>; snps,multicast-filter-bins = <256>; iommus = <&smmu 1>; + altr,sysmgr-syscon = <&sysmgr 0x44 0>; status = "disabled"; }; @@ -108,6 +129,7 @@ rx-fifo-depth = <16384>; snps,multicast-filter-bins = <256>; iommus = <&smmu 2>; + altr,sysmgr-syscon = <&sysmgr 0x48 8>; status = "disabled"; }; @@ -123,6 +145,7 @@ rx-fifo-depth = <16384>; snps,multicast-filter-bins = <256>; iommus = <&smmu 3>; + altr,sysmgr-syscon = <&sysmgr 0x4c 16>; status = "disabled"; }; @@ -229,6 +252,18 @@ status = "disabled"; }; + nand: nand@ffb90000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "altr,socfpga-denali-nand"; + reg = <0xffb90000 0x10000>, + <0xffb80000 0x1000>; + reg-names = "nand_data", "denali_reg"; + interrupts = <0 97 4>; + resets = <&rst NAND_RESET>, <&rst NAND_OCP_RESET>; + status = "disabled"; + }; + ocram: sram@ffe00000 { compatible = "mmio-sram"; reg = <0xffe00000 0x40000>; @@ -249,6 +284,8 @@ #dma-cells = <1>; #dma-channels = <8>; #dma-requests = <32>; + resets = <&rst DMA_RESET>, <&rst DMA_OCP_RESET>; + reset-names = "dma", "dma-ocp"; }; rst: rstmgr@ffd11000 { @@ -303,7 +340,7 @@ }; sysmgr: sysmgr@ffd12000 { - compatible = "altr,sys-mgr", "syscon"; + compatible = "altr,sys-mgr-s10","altr,sys-mgr"; reg = <0xffd12000 0x500>; }; @@ -427,6 +464,65 @@ reg = <0xf8011100 0xc0>; }; + eccmgr { + compatible = "altr,socfpga-s10-ecc-manager", + "altr,socfpga-a10-ecc-manager"; + altr,sysmgr-syscon = <&sysmgr>; + #address-cells = <1>; + #size-cells = <1>; + interrupts = <0 15 4>; + interrupt-controller; + #interrupt-cells = <2>; + ranges; + + sdramedac { + compatible = "altr,sdram-edac-s10"; + altr,sdr-syscon = <&sdr>; + interrupts = <16 4>; + }; + + ocram-ecc@ff8cc000 { + compatible = "altr,socfpga-s10-ocram-ecc", + "altr,socfpga-a10-ocram-ecc"; + reg = <0xff8cc000 0x100>; + altr,ecc-parent = <&ocram>; + interrupts = <1 4>; + }; + + usb0-ecc@ff8c4000 { + compatible = "altr,socfpga-s10-usb-ecc", + "altr,socfpga-usb-ecc"; + reg = <0xff8c4000 0x100>; + altr,ecc-parent = <&usb0>; + interrupts = <2 4>; + }; + + emac0-rx-ecc@ff8c0000 { + compatible = "altr,socfpga-s10-eth-mac-ecc", + "altr,socfpga-eth-mac-ecc"; + reg = <0xff8c0000 0x100>; + altr,ecc-parent = <&gmac0>; + interrupts = <4 4>; + }; + + emac0-tx-ecc@ff8c0400 { + compatible = "altr,socfpga-s10-eth-mac-ecc", + "altr,socfpga-eth-mac-ecc"; + reg = <0xff8c0400 0x100>; + altr,ecc-parent = <&gmac0>; + interrupts = <5 4>; + }; + + sdmmca-ecc@ff8c8c00 { + compatible = "altr,socfpga-s10-sdmmc-ecc", + "altr,socfpga-sdmmc-ecc"; + reg = <0xff8c8c00 0x100>; + altr,ecc-parent = <&mmc>; + interrupts = <14 4>, + <15 4>; + }; + }; + qspi: spi@ff8d2000 { compatible = "cdns,qspi-nor"; #address-cells = <1>; @@ -440,5 +536,17 @@ status = "disabled"; }; + + firmware { + svc { + compatible = "intel,stratix10-svc"; + method = "smc"; + memory-region = <&service_reserved>; + + fpga_mgr: fpga-mgr { + compatible = "intel,stratix10-soc-fpga-mgr"; + }; + }; + }; }; }; diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts b/arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts index 7814a9e8eb08..e794a12ba7c5 100644 --- a/arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts +++ b/arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts @@ -18,6 +18,24 @@ stdout-path = "serial0:115200n8"; }; + leds { + compatible = "gpio-leds"; + hps0 { + label = "hps_led0"; + gpios = <&portb 20 GPIO_ACTIVE_HIGH>; + }; + + hps1 { + label = "hps_led1"; + gpios = <&portb 19 GPIO_ACTIVE_HIGH>; + }; + + hps2 { + label = "hps_led2"; + gpios = <&portb 21 GPIO_ACTIVE_HIGH>; + }; + }; + memory { device_type = "memory"; /* We expect the bootloader to fill in the reg */ @@ -70,6 +88,46 @@ status = "okay"; }; +&usb0 { + status = "okay"; + disable-over-current; +}; + &watchdog0 { status = "okay"; }; + +&qspi { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "mt25qu02g"; + reg = <0>; + spi-max-frequency = <100000000>; + + m25p,fast-read; + cdns,page-size = <256>; + cdns,block-size = <16>; + cdns,read-delay = <1>; + cdns,tshsl-ns = <50>; + cdns,tsd2d-ns = <50>; + cdns,tchsh-ns = <4>; + cdns,tslch-ns = <4>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + qspi_boot: partition@0 { + label = "Boot and fpga data"; + reg = <0x0 0x034B0000>; + }; + + qspi_rootfs: partition@34B0000 { + label = "Root Filesystem - JFFS2"; + reg = <0x034B0000 0x0EB50000>; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex_socdk_nand.dts b/arch/arm64/boot/dts/intel/socfpga_agilex_socdk_nand.dts new file mode 100644 index 000000000000..979aa59a6bd0 --- /dev/null +++ b/arch/arm64/boot/dts/intel/socfpga_agilex_socdk_nand.dts @@ -0,0 +1,135 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2019, Intel Corporation + */ +#include "socfpga_agilex.dtsi" + +/ { + model = "SoCFPGA Agilex SoCDK"; + + aliases { + serial0 = &uart0; + ethernet0 = &gmac0; + ethernet1 = &gmac1; + ethernet2 = &gmac2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + hps0 { + label = "hps_led0"; + gpios = <&portb 20 GPIO_ACTIVE_HIGH>; + }; + + hps1 { + label = "hps_led1"; + gpios = <&portb 19 GPIO_ACTIVE_HIGH>; + }; + + hps2 { + label = "hps_led2"; + gpios = <&portb 21 GPIO_ACTIVE_HIGH>; + }; + }; + + memory { + device_type = "memory"; + /* We expect the bootloader to fill in the reg */ + reg = <0 0 0 0>; + }; + + soc { + clocks { + osc1 { + clock-frequency = <25000000>; + }; + }; + }; +}; + +&gpio1 { + status = "okay"; +}; + +&gmac2 { + status = "okay"; + phy-mode = "rgmii"; + phy-handle = <&phy0>; + + max-frame-size = <9000>; + + mdio0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + phy0: ethernet-phy@0 { + reg = <4>; + + txd0-skew-ps = <0>; /* -420ps */ + txd1-skew-ps = <0>; /* -420ps */ + txd2-skew-ps = <0>; /* -420ps */ + txd3-skew-ps = <0>; /* -420ps */ + rxd0-skew-ps = <420>; /* 0ps */ + rxd1-skew-ps = <420>; /* 0ps */ + rxd2-skew-ps = <420>; /* 0ps */ + rxd3-skew-ps = <420>; /* 0ps */ + txen-skew-ps = <0>; /* -420ps */ + txc-skew-ps = <900>; /* 0ps */ + rxdv-skew-ps = <420>; /* 0ps */ + rxc-skew-ps = <1680>; /* 780ps */ + }; + }; +}; + +&nand { + status = "okay"; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + reg = <0>; + nand-bus-width = <16>; + + partition@0 { + label = "u-boot"; + reg = <0 0x200000>; + }; + partition@200000 { + label = "env"; + reg = <0x200000 0x40000>; + }; + partition@240000 { + label = "dtb"; + reg = <0x240000 0x40000>; + }; + partition@280000 { + label = "kernel"; + reg = <0x280000 0x2000000>; + }; + partition@2280000 { + label = "misc"; + reg = <0x2280000 0x2000000>; + }; + partition@4280000 { + label = "rootfs"; + reg = <0x4280000 0x3bd80000>; + }; + }; +}; + +&uart0 { + status = "okay"; +}; + +&usb0 { + status = "okay"; + disable-over-current; +}; + +&watchdog0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/lg/lg1312.dtsi b/arch/arm64/boot/dts/lg/lg1312.dtsi index c8dc9c20fba3..64f3b135068d 100644 --- a/arch/arm64/boot/dts/lg/lg1312.dtsi +++ b/arch/arm64/boot/dts/lg/lg1312.dtsi @@ -124,7 +124,7 @@ amba { #address-cells = <2>; #size-cells = <1>; - #interrupts-cells = <3>; + #interrupt-cells = <3>; compatible = "simple-bus"; interrupt-parent = <&gic>; diff --git a/arch/arm64/boot/dts/lg/lg1313.dtsi b/arch/arm64/boot/dts/lg/lg1313.dtsi index 82c6645b58b7..ac23592ab011 100644 --- a/arch/arm64/boot/dts/lg/lg1313.dtsi +++ b/arch/arm64/boot/dts/lg/lg1313.dtsi @@ -124,7 +124,7 @@ amba { #address-cells = <2>; #size-cells = <1>; - #interrupts-cells = <3>; + #interrupt-cells = <3>; compatible = "simple-bus"; interrupt-parent = <&gic>; diff --git a/arch/arm64/boot/dts/marvell/Makefile b/arch/arm64/boot/dts/marvell/Makefile index caed4334f27d..f1b5127f0b89 100644 --- a/arch/arm64/boot/dts/marvell/Makefile +++ b/arch/arm64/boot/dts/marvell/Makefile @@ -2,6 +2,7 @@ # Mvebu SoC Family dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-db.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin.dtb +dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-turris-mox.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-uDPU.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-7040-db.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-8040-clearfog-gt-8k.dtb @@ -9,3 +10,6 @@ dtb-$(CONFIG_ARCH_MVEBU) += armada-8040-db.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-8040-mcbin.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-8040-mcbin-singleshot.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-8080-db.dtb +dtb-$(CONFIG_ARCH_MVEBU) += cn9130-db.dtb +dtb-$(CONFIG_ARCH_MVEBU) += cn9131-db.dtb +dtb-$(CONFIG_ARCH_MVEBU) += cn9132-db.dtb diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-emmc.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-emmc.dts new file mode 100644 index 000000000000..bd9ed9dc9c3e --- /dev/null +++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-emmc.dts @@ -0,0 +1,42 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree file for Globalscale Marvell ESPRESSOBin Board with eMMC + * Copyright (C) 2018 Marvell + * + * Romain Perier <romain.perier@free-electrons.com> + * Konstantin Porotchkin <kostap@marvell.com> + * + */ +/* + * Schematic available at http://espressobin.net/wp-content/uploads/2017/08/ESPRESSObin_V5_Schematics.pdf + */ + +#include "armada-3720-espressobin.dtsi" + +/ { + model = "Globalscale Marvell ESPRESSOBin Board (eMMC)"; + compatible = "globalscale,espressobin-emmc", "globalscale,espressobin", + "marvell,armada3720", "marvell,armada3710"; +}; + +/* U11 */ +&sdhci0 { + non-removable; + bus-width = <8>; + mmc-ddr-1_8v; + mmc-hs400-1_8v; + marvell,xenon-emmc; + marvell,xenon-tun-count = <9>; + marvell,pad-type = "fixed-1-8v"; + + pinctrl-names = "default"; + pinctrl-0 = <&mmc_pins>; + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + mmccard: mmccard@0 { + compatible = "mmc-card"; + reg = <0>; + }; +}; diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts new file mode 100644 index 000000000000..6e876a6d9532 --- /dev/null +++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts @@ -0,0 +1,59 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree file for Globalscale Marvell ESPRESSOBin Board V7 with eMMC + * Copyright (C) 2018 Marvell + * + * Romain Perier <romain.perier@free-electrons.com> + * Konstantin Porotchkin <kostap@marvell.com> + * + */ +/* + * Schematic available at http://wiki.espressobin.net/tiki-download_file.php?fileId=200 + */ + +#include "armada-3720-espressobin.dtsi" + +/ { + model = "Globalscale Marvell ESPRESSOBin Board V7 (eMMC)"; + compatible = "globalscale,espressobin-v7-emmc", "globalscale,espressobin-v7", + "globalscale,espressobin", "marvell,armada3720", + "marvell,armada3710"; +}; + +&switch0 { + ports { + port@1 { + reg = <1>; + label = "lan1"; + phy-handle = <&switch0phy0>; + }; + + port@3 { + reg = <3>; + label = "wan"; + phy-handle = <&switch0phy2>; + }; + }; +}; + +/* U11 */ +&sdhci0 { + non-removable; + bus-width = <8>; + mmc-ddr-1_8v; + mmc-hs400-1_8v; + marvell,xenon-emmc; + marvell,xenon-tun-count = <9>; + marvell,pad-type = "fixed-1-8v"; + + pinctrl-names = "default"; + pinctrl-0 = <&mmc_pins>; + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + mmccard: mmccard@0 { + compatible = "mmc-card"; + reg = <0>; + }; +}; diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts new file mode 100644 index 000000000000..0f8405d085fd --- /dev/null +++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts @@ -0,0 +1,36 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree file for Globalscale Marvell ESPRESSOBin Board V7 + * Copyright (C) 2018 Marvell + * + * Romain Perier <romain.perier@free-electrons.com> + * Konstantin Porotchkin <kostap@marvell.com> + * + */ +/* + * Schematic available at http://wiki.espressobin.net/tiki-download_file.php?fileId=200 + */ + +#include "armada-3720-espressobin.dtsi" + +/ { + model = "Globalscale Marvell ESPRESSOBin Board V7"; + compatible = "globalscale,espressobin-v7", "globalscale,espressobin", + "marvell,armada3720", "marvell,armada3710"; +}; + +&switch0 { + ports { + port@1 { + reg = <1>; + label = "lan1"; + phy-handle = <&switch0phy0>; + }; + + port@3 { + reg = <3>; + label = "wan"; + phy-handle = <&switch0phy2>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts index fbcf03f86c96..1542d836c090 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts +++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts @@ -12,191 +12,9 @@ /dts-v1/; -#include <dt-bindings/gpio/gpio.h> -#include "armada-372x.dtsi" +#include "armada-3720-espressobin.dtsi" / { model = "Globalscale Marvell ESPRESSOBin Board"; compatible = "globalscale,espressobin", "marvell,armada3720", "marvell,armada3710"; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - memory@0 { - device_type = "memory"; - reg = <0x00000000 0x00000000 0x00000000 0x20000000>; - }; - - vcc_sd_reg1: regulator { - compatible = "regulator-gpio"; - regulator-name = "vcc_sd1"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - - gpios = <&gpionb 4 GPIO_ACTIVE_HIGH>; - gpios-states = <0>; - states = <1800000 0x1 - 3300000 0x0>; - enable-active-high; - }; -}; - -/* J9 */ -&pcie0 { - status = "okay"; - phys = <&comphy1 0>; - pinctrl-names = "default"; - pinctrl-0 = <&pcie_reset_pins &pcie_clkreq_pins>; -}; - -/* J6 */ -&sata { - status = "okay"; - phys = <&comphy2 0>; - phy-names = "sata-phy"; -}; - -/* J1 */ -&sdhci1 { - wp-inverted; - bus-width = <4>; - cd-gpios = <&gpionb 3 GPIO_ACTIVE_LOW>; - marvell,pad-type = "sd"; - vqmmc-supply = <&vcc_sd_reg1>; - - pinctrl-names = "default"; - pinctrl-0 = <&sdio_pins>; - status = "okay"; -}; - -/* U11 */ -&sdhci0 { - non-removable; - bus-width = <8>; - mmc-ddr-1_8v; - mmc-hs400-1_8v; - marvell,xenon-emmc; - marvell,xenon-tun-count = <9>; - marvell,pad-type = "fixed-1-8v"; - - pinctrl-names = "default"; - pinctrl-0 = <&mmc_pins>; -/* - * This eMMC is not populated on all boards, so disable it by - * default and let the bootloader enable it, if it is present - */ - status = "disabled"; -}; - -&spi0 { - status = "okay"; - - flash@0 { - reg = <0>; - compatible = "jedec,spi-nor"; - spi-max-frequency = <104000000>; - m25p,fast-read; - }; -}; - -/* Exported on the micro USB connector J5 through an FTDI */ -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart1_pins>; - status = "okay"; -}; - -/* - * Connector J17 and J18 expose a number of different features. Some pins are - * multiplexed. This is the case for instance for the following features: - * - UART1 (pin 24 = RX, pin 26 = TX). See armada-3720-db.dts for an example of - * how to enable it. Beware that the signals are 1.8V TTL. - * - I2C - * - SPI - * - MMC - */ - -/* J7 */ -&usb3 { - status = "okay"; -}; - -/* J8 */ -&usb2 { - status = "okay"; -}; - -&mdio { - switch0: switch0@1 { - compatible = "marvell,mv88e6085"; - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - - dsa,member = <0 0>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - label = "cpu"; - ethernet = <ð0>; - phy-mode = "rgmii-id"; - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - - port@1 { - reg = <1>; - label = "wan"; - phy-handle = <&switch0phy0>; - }; - - port@2 { - reg = <2>; - label = "lan0"; - phy-handle = <&switch0phy1>; - }; - - port@3 { - reg = <3>; - label = "lan1"; - phy-handle = <&switch0phy2>; - }; - - }; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - switch0phy0: switch0phy0@11 { - reg = <0x11>; - }; - switch0phy1: switch0phy1@12 { - reg = <0x12>; - }; - switch0phy2: switch0phy2@13 { - reg = <0x13>; - }; - }; - }; -}; - -ð0 { - pinctrl-names = "default"; - pinctrl-0 = <&rgmii_pins>, <&smi_pins>; - phy-mode = "rgmii-id"; - status = "okay"; - - fixed-link { - speed = <1000>; - full-duplex; - }; }; diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi new file mode 100644 index 000000000000..53b8ac55a7f3 --- /dev/null +++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi @@ -0,0 +1,177 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree file for Globalscale Marvell ESPRESSOBin Board + * Copyright (C) 2016 Marvell + * + * Romain Perier <romain.perier@free-electrons.com> + * + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include "armada-372x.dtsi" + +/ { + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x00000000 0x00000000 0x20000000>; + }; + + vcc_sd_reg1: regulator { + compatible = "regulator-gpio"; + regulator-name = "vcc_sd1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + + gpios = <&gpionb 4 GPIO_ACTIVE_HIGH>; + gpios-states = <0>; + states = <1800000 0x1 + 3300000 0x0>; + enable-active-high; + }; +}; + +/* J9 */ +&pcie0 { + status = "okay"; + phys = <&comphy1 0>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie_reset_pins &pcie_clkreq_pins>; +}; + +/* J6 */ +&sata { + status = "okay"; + phys = <&comphy2 0>; + phy-names = "sata-phy"; +}; + +/* J1 */ +&sdhci1 { + wp-inverted; + bus-width = <4>; + cd-gpios = <&gpionb 3 GPIO_ACTIVE_LOW>; + marvell,pad-type = "sd"; + vqmmc-supply = <&vcc_sd_reg1>; + + pinctrl-names = "default"; + pinctrl-0 = <&sdio_pins>; + status = "okay"; +}; + +&spi0 { + status = "okay"; + + flash@0 { + reg = <0>; + compatible = "jedec,spi-nor"; + spi-max-frequency = <104000000>; + m25p,fast-read; + }; +}; + +/* Exported on the micro USB connector J5 through an FTDI */ +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; + status = "okay"; +}; + +/* + * Connector J17 and J18 expose a number of different features. Some pins are + * multiplexed. This is the case for instance for the following features: + * - UART1 (pin 24 = RX, pin 26 = TX). See armada-3720-db.dts for an example of + * how to enable it. Beware that the signals are 1.8V TTL. + * - I2C + * - SPI + * - MMC + */ + +/* J7 */ +&usb3 { + status = "okay"; +}; + +/* J8 */ +&usb2 { + status = "okay"; +}; + +&mdio { + switch0: switch0@1 { + compatible = "marvell,mv88e6085"; + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + dsa,member = <0 0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "cpu"; + ethernet = <ð0>; + phy-mode = "rgmii-id"; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + port@1 { + reg = <1>; + label = "wan"; + phy-handle = <&switch0phy0>; + }; + + port@2 { + reg = <2>; + label = "lan0"; + phy-handle = <&switch0phy1>; + }; + + port@3 { + reg = <3>; + label = "lan1"; + phy-handle = <&switch0phy2>; + }; + + }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + switch0phy0: switch0phy0@11 { + reg = <0x11>; + }; + switch0phy1: switch0phy1@12 { + reg = <0x12>; + }; + switch0phy2: switch0phy2@13 { + reg = <0x13>; + }; + }; + }; +}; + +ð0 { + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins>, <&smi_pins>; + phy-mode = "rgmii-id"; + status = "okay"; + + fixed-link { + speed = <1000>; + full-duplex; + }; +}; diff --git a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts new file mode 100644 index 000000000000..bb42d1e6a4e9 --- /dev/null +++ b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts @@ -0,0 +1,849 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree file for CZ.NIC Turris Mox Board + * 2019 by Marek Behun <marek.behun@nic.cz> + */ + +/dts-v1/; + +#include <dt-bindings/bus/moxtet.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include "armada-372x.dtsi" + +/ { + model = "CZ.NIC Turris Mox Board"; + compatible = "cznic,turris-mox", "marvell,armada3720", + "marvell,armada3710"; + + aliases { + spi0 = &spi0; + ethernet1 = ð1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x00000000 0x00000000 0x20000000>; + }; + + leds { + compatible = "gpio-leds"; + red { + label = "mox:red:activity"; + gpios = <&gpiosb 21 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-on"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + linux,code = <KEY_RESTART>; + gpios = <&gpiosb 20 GPIO_ACTIVE_LOW>; + debounce-interval = <60>; + }; + }; + + exp_usb3_vbus: usb3-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb3-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + gpio = <&gpiosb 0 GPIO_ACTIVE_HIGH>; + }; + + vsdc_reg: vsdc-reg { + compatible = "regulator-gpio"; + regulator-name = "vsdc"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + + gpios = <&gpiosb 23 GPIO_ACTIVE_HIGH>; + gpios-states = <0>; + states = <1800000 0x1 + 3300000 0x0>; + enable-active-high; + }; + + vsdio_reg: vsdio-reg { + compatible = "regulator-gpio"; + regulator-name = "vsdio"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + + gpios = <&gpiosb 22 GPIO_ACTIVE_HIGH>; + gpios-states = <0>; + states = <1800000 0x1 + 3300000 0x0>; + enable-active-high; + }; + + sdhci1_pwrseq: sdhci1-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpionb 19 GPIO_ACTIVE_HIGH>; + status = "okay"; + }; + + sfp: sfp { + compatible = "sff,sfp+"; + i2c-bus = <&i2c0>; + los-gpio = <&moxtet_sfp 0 GPIO_ACTIVE_HIGH>; + tx-fault-gpio = <&moxtet_sfp 1 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&moxtet_sfp 2 GPIO_ACTIVE_LOW>; + tx-disable-gpio = <&moxtet_sfp 4 GPIO_ACTIVE_HIGH>; + rate-select0-gpio = <&moxtet_sfp 5 GPIO_ACTIVE_HIGH>; + + /* enabled by U-Boot if SFP module is present */ + status = "disabled"; + }; + + firmware { + turris-mox-rwtm { + compatible = "cznic,turris-mox-rwtm"; + mboxes = <&rwtm 0>; + status = "okay"; + }; + }; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + clock-frequency = <100000>; + status = "okay"; + + rtc@6f { + compatible = "microchip,mcp7940x"; + reg = <0x6f>; + }; +}; + +&pcie_reset_pins { + function = "gpio"; +}; + +&pcie0 { + pinctrl-names = "default"; + pinctrl-0 = <&pcie_reset_pins &pcie_clkreq_pins>; + status = "okay"; + max-link-speed = <2>; + reset-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>; + phys = <&comphy1 0>; + + /* enabled by U-Boot if PCIe module is present */ + status = "disabled"; +}; + +&uart0 { + status = "okay"; +}; + +ð0 { + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins>; + phy-mode = "rgmii-id"; + phy = <&phy1>; + status = "okay"; +}; + +ð1 { + phy-mode = "2500base-x"; + managed = "in-band-status"; + phys = <&comphy0 1>; +}; + +&sdhci0 { + wp-inverted; + bus-width = <4>; + cd-gpios = <&gpionb 10 GPIO_ACTIVE_HIGH>; + vqmmc-supply = <&vsdc_reg>; + marvell,pad-type = "sd"; + status = "okay"; +}; + +&sdhci1 { + pinctrl-names = "default"; + pinctrl-0 = <&sdio_pins>; + non-removable; + bus-width = <4>; + marvell,pad-type = "sd"; + vqmmc-supply = <&vsdio_reg>; + mmc-pwrseq = <&sdhci1_pwrseq>; + status = "okay"; +}; + +&spi0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&spi_quad_pins &spi_cs1_pins>; + assigned-clocks = <&nb_periph_clk 7>; + assigned-clock-parents = <&tbg 1>; + assigned-clock-rates = <20000000>; + + spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <20000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "secure-firmware"; + reg = <0x0 0x20000>; + }; + + partition@20000 { + label = "u-boot"; + reg = <0x20000 0x160000>; + }; + + partition@180000 { + label = "u-boot-env"; + reg = <0x180000 0x10000>; + }; + + partition@190000 { + label = "Rescue system"; + reg = <0x190000 0x660000>; + }; + + partition@7f0000 { + label = "dtb"; + reg = <0x7f0000 0x10000>; + }; + }; + }; + + moxtet: moxtet@1 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "cznic,moxtet"; + reg = <1>; + reset-gpios = <&gpiosb 2 GPIO_ACTIVE_LOW>; + spi-max-frequency = <10000000>; + spi-cpol; + spi-cpha; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&gpiosb>; + interrupts = <5 IRQ_TYPE_EDGE_FALLING>; + status = "okay"; + + moxtet_sfp: gpio@0 { + compatible = "cznic,moxtet-gpio"; + gpio-controller; + #gpio-cells = <2>; + reg = <0>; + status = "disabled"; + }; + }; +}; + +&usb2 { + status = "okay"; +}; + +&comphy2 { + connector { + compatible = "usb-a-connector"; + phy-supply = <&exp_usb3_vbus>; + }; +}; + +&usb3 { + status = "okay"; + phys = <&comphy2 0>; +}; + +&mdio { + pinctrl-names = "default"; + pinctrl-0 = <&smi_pins>; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; + + /* switch nodes are enabled by U-Boot if modules are present */ + switch0@10 { + compatible = "marvell,mv88e6190"; + reg = <0x10 0>; + dsa,member = <0 0>; + interrupt-parent = <&moxtet>; + interrupts = <MOXTET_IRQ_PERIDOT(0)>; + status = "disabled"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + switch0phy1: switch0phy1@1 { + reg = <0x1>; + }; + + switch0phy2: switch0phy2@2 { + reg = <0x2>; + }; + + switch0phy3: switch0phy3@3 { + reg = <0x3>; + }; + + switch0phy4: switch0phy4@4 { + reg = <0x4>; + }; + + switch0phy5: switch0phy5@5 { + reg = <0x5>; + }; + + switch0phy6: switch0phy6@6 { + reg = <0x6>; + }; + + switch0phy7: switch0phy7@7 { + reg = <0x7>; + }; + + switch0phy8: switch0phy8@8 { + reg = <0x8>; + }; + }; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <0x1>; + label = "lan1"; + phy-handle = <&switch0phy1>; + }; + + port@2 { + reg = <0x2>; + label = "lan2"; + phy-handle = <&switch0phy2>; + }; + + port@3 { + reg = <0x3>; + label = "lan3"; + phy-handle = <&switch0phy3>; + }; + + port@4 { + reg = <0x4>; + label = "lan4"; + phy-handle = <&switch0phy4>; + }; + + port@5 { + reg = <0x5>; + label = "lan5"; + phy-handle = <&switch0phy5>; + }; + + port@6 { + reg = <0x6>; + label = "lan6"; + phy-handle = <&switch0phy6>; + }; + + port@7 { + reg = <0x7>; + label = "lan7"; + phy-handle = <&switch0phy7>; + }; + + port@8 { + reg = <0x8>; + label = "lan8"; + phy-handle = <&switch0phy8>; + }; + + port@9 { + reg = <0x9>; + label = "cpu"; + ethernet = <ð1>; + phy-mode = "2500base-x"; + managed = "in-band-status"; + }; + + switch0port10: port@a { + reg = <0xa>; + label = "dsa"; + phy-mode = "2500base-x"; + managed = "in-band-status"; + link = <&switch1port9 &switch2port9>; + status = "disabled"; + }; + + port-sfp@a { + reg = <0xa>; + label = "sfp"; + sfp = <&sfp>; + phy-mode = "sgmii"; + managed = "in-band-status"; + status = "disabled"; + }; + }; + }; + + switch0@2 { + compatible = "marvell,mv88e6085"; + reg = <0x2 0>; + dsa,member = <0 0>; + interrupt-parent = <&moxtet>; + interrupts = <MOXTET_IRQ_TOPAZ>; + status = "disabled"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + switch0phy1_topaz: switch0phy1@11 { + reg = <0x11>; + }; + + switch0phy2_topaz: switch0phy2@12 { + reg = <0x12>; + }; + + switch0phy3_topaz: switch0phy3@13 { + reg = <0x13>; + }; + + switch0phy4_topaz: switch0phy4@14 { + reg = <0x14>; + }; + }; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <0x1>; + label = "lan1"; + phy-handle = <&switch0phy1_topaz>; + }; + + port@2 { + reg = <0x2>; + label = "lan2"; + phy-handle = <&switch0phy2_topaz>; + }; + + port@3 { + reg = <0x3>; + label = "lan3"; + phy-handle = <&switch0phy3_topaz>; + }; + + port@4 { + reg = <0x4>; + label = "lan4"; + phy-handle = <&switch0phy4_topaz>; + }; + + port@5 { + reg = <0x5>; + label = "cpu"; + phy-mode = "2500base-x"; + managed = "in-band-status"; + ethernet = <ð1>; + }; + }; + }; + + switch1@11 { + compatible = "marvell,mv88e6190"; + reg = <0x11 0>; + dsa,member = <0 1>; + interrupt-parent = <&moxtet>; + interrupts = <MOXTET_IRQ_PERIDOT(1)>; + status = "disabled"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + switch1phy1: switch1phy1@1 { + reg = <0x1>; + }; + + switch1phy2: switch1phy2@2 { + reg = <0x2>; + }; + + switch1phy3: switch1phy3@3 { + reg = <0x3>; + }; + + switch1phy4: switch1phy4@4 { + reg = <0x4>; + }; + + switch1phy5: switch1phy5@5 { + reg = <0x5>; + }; + + switch1phy6: switch1phy6@6 { + reg = <0x6>; + }; + + switch1phy7: switch1phy7@7 { + reg = <0x7>; + }; + + switch1phy8: switch1phy8@8 { + reg = <0x8>; + }; + }; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <0x1>; + label = "lan9"; + phy-handle = <&switch1phy1>; + }; + + port@2 { + reg = <0x2>; + label = "lan10"; + phy-handle = <&switch1phy2>; + }; + + port@3 { + reg = <0x3>; + label = "lan11"; + phy-handle = <&switch1phy3>; + }; + + port@4 { + reg = <0x4>; + label = "lan12"; + phy-handle = <&switch1phy4>; + }; + + port@5 { + reg = <0x5>; + label = "lan13"; + phy-handle = <&switch1phy5>; + }; + + port@6 { + reg = <0x6>; + label = "lan14"; + phy-handle = <&switch1phy6>; + }; + + port@7 { + reg = <0x7>; + label = "lan15"; + phy-handle = <&switch1phy7>; + }; + + port@8 { + reg = <0x8>; + label = "lan16"; + phy-handle = <&switch1phy8>; + }; + + switch1port9: port@9 { + reg = <0x9>; + label = "dsa"; + phy-mode = "2500base-x"; + managed = "in-band-status"; + link = <&switch0port10>; + }; + + switch1port10: port@a { + reg = <0xa>; + label = "dsa"; + phy-mode = "2500base-x"; + managed = "in-band-status"; + link = <&switch2port9>; + status = "disabled"; + }; + + port-sfp@a { + reg = <0xa>; + label = "sfp"; + sfp = <&sfp>; + phy-mode = "sgmii"; + managed = "in-band-status"; + status = "disabled"; + }; + }; + }; + + switch1@2 { + compatible = "marvell,mv88e6085"; + reg = <0x2 0>; + dsa,member = <0 1>; + interrupt-parent = <&moxtet>; + interrupts = <MOXTET_IRQ_TOPAZ>; + status = "disabled"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + switch1phy1_topaz: switch1phy1@11 { + reg = <0x11>; + }; + + switch1phy2_topaz: switch1phy2@12 { + reg = <0x12>; + }; + + switch1phy3_topaz: switch1phy3@13 { + reg = <0x13>; + }; + + switch1phy4_topaz: switch1phy4@14 { + reg = <0x14>; + }; + }; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <0x1>; + label = "lan9"; + phy-handle = <&switch1phy1_topaz>; + }; + + port@2 { + reg = <0x2>; + label = "lan10"; + phy-handle = <&switch1phy2_topaz>; + }; + + port@3 { + reg = <0x3>; + label = "lan11"; + phy-handle = <&switch1phy3_topaz>; + }; + + port@4 { + reg = <0x4>; + label = "lan12"; + phy-handle = <&switch1phy4_topaz>; + }; + + port@5 { + reg = <0x5>; + label = "dsa"; + phy-mode = "2500base-x"; + managed = "in-band-status"; + link = <&switch0port10>; + }; + }; + }; + + switch2@12 { + compatible = "marvell,mv88e6190"; + reg = <0x12 0>; + dsa,member = <0 2>; + interrupt-parent = <&moxtet>; + interrupts = <MOXTET_IRQ_PERIDOT(2)>; + status = "disabled"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + switch2phy1: switch2phy1@1 { + reg = <0x1>; + }; + + switch2phy2: switch2phy2@2 { + reg = <0x2>; + }; + + switch2phy3: switch2phy3@3 { + reg = <0x3>; + }; + + switch2phy4: switch2phy4@4 { + reg = <0x4>; + }; + + switch2phy5: switch2phy5@5 { + reg = <0x5>; + }; + + switch2phy6: switch2phy6@6 { + reg = <0x6>; + }; + + switch2phy7: switch2phy7@7 { + reg = <0x7>; + }; + + switch2phy8: switch2phy8@8 { + reg = <0x8>; + }; + }; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <0x1>; + label = "lan17"; + phy-handle = <&switch2phy1>; + }; + + port@2 { + reg = <0x2>; + label = "lan18"; + phy-handle = <&switch2phy2>; + }; + + port@3 { + reg = <0x3>; + label = "lan19"; + phy-handle = <&switch2phy3>; + }; + + port@4 { + reg = <0x4>; + label = "lan20"; + phy-handle = <&switch2phy4>; + }; + + port@5 { + reg = <0x5>; + label = "lan21"; + phy-handle = <&switch2phy5>; + }; + + port@6 { + reg = <0x6>; + label = "lan22"; + phy-handle = <&switch2phy6>; + }; + + port@7 { + reg = <0x7>; + label = "lan23"; + phy-handle = <&switch2phy7>; + }; + + port@8 { + reg = <0x8>; + label = "lan24"; + phy-handle = <&switch2phy8>; + }; + + switch2port9: port@9 { + reg = <0x9>; + label = "dsa"; + phy-mode = "2500base-x"; + managed = "in-band-status"; + link = <&switch1port10 &switch0port10>; + }; + + port-sfp@a { + reg = <0xa>; + label = "sfp"; + sfp = <&sfp>; + phy-mode = "sgmii"; + managed = "in-band-status"; + status = "disabled"; + }; + }; + }; + + switch2@2 { + compatible = "marvell,mv88e6085"; + reg = <0x2 0>; + dsa,member = <0 2>; + interrupt-parent = <&moxtet>; + interrupts = <MOXTET_IRQ_TOPAZ>; + status = "disabled"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + switch2phy1_topaz: switch2phy1@11 { + reg = <0x11>; + }; + + switch2phy2_topaz: switch2phy2@12 { + reg = <0x12>; + }; + + switch2phy3_topaz: switch2phy3@13 { + reg = <0x13>; + }; + + switch2phy4_topaz: switch2phy4@14 { + reg = <0x14>; + }; + }; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <0x1>; + label = "lan17"; + phy-handle = <&switch2phy1_topaz>; + }; + + port@2 { + reg = <0x2>; + label = "lan18"; + phy-handle = <&switch2phy2_topaz>; + }; + + port@3 { + reg = <0x3>; + label = "lan19"; + phy-handle = <&switch2phy3_topaz>; + }; + + port@4 { + reg = <0x4>; + label = "lan20"; + phy-handle = <&switch2phy4_topaz>; + }; + + port@5 { + reg = <0x5>; + label = "dsa"; + phy-mode = "2500base-x"; + managed = "in-band-status"; + link = <&switch1port10 &switch0port10>; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts index bd4aab6092e0..7eb6c1796cef 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts +++ b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts @@ -69,6 +69,7 @@ mod-def0-gpio = <&gpiosb 3 GPIO_ACTIVE_LOW>; tx-disable-gpio = <&gpiosb 4 GPIO_ACTIVE_HIGH>; tx-fault-gpio = <&gpiosb 5 GPIO_ACTIVE_HIGH>; + maximum-power-milliwatt = <3000>; }; sfp_eth1: sfp-eth1 { @@ -78,6 +79,7 @@ mod-def0-gpio = <&gpiosb 8 GPIO_ACTIVE_LOW>; tx-disable-gpio = <&gpiosb 9 GPIO_ACTIVE_HIGH>; tx-fault-gpio = <&gpiosb 10 GPIO_ACTIVE_HIGH>; + maximum-power-milliwatt = <3000>; }; }; @@ -119,12 +121,14 @@ status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&i2c1_pins>; + /delete-property/mrvl,i2c-fast-mode; }; &i2c1 { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&i2c2_pins>; + /delete-property/mrvl,i2c-fast-mode; lm75@48 { status = "okay"; @@ -143,6 +147,7 @@ phy-mode = "sgmii"; status = "okay"; managed = "in-band-status"; + phys = <&comphy1 0>; sfp = <&sfp_eth0>; }; @@ -150,11 +155,14 @@ phy-mode = "sgmii"; status = "okay"; managed = "in-band-status"; + phys = <&comphy0 1>; sfp = <&sfp_eth1>; }; &usb3 { status = "okay"; + phys = <&usb2_utmi_otg_phy>; + phy-names = "usb2-utmi-otg-phy"; }; &uart0 { diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi index f43c43168b00..000c135e39b7 100644 --- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi @@ -215,6 +215,11 @@ function = "spi"; }; + spi_cs1_pins: spi-cs1-pins { + groups = "spi_cs1"; + function = "spi"; + }; + i2c1_pins: i2c1-pins { groups = "i2c1"; function = "i2c"; @@ -419,6 +424,13 @@ clocks = <&nb_periph_clk 15>; }; + rwtm: mailbox@b0000 { + compatible = "marvell,armada-3700-rwtm-mailbox"; + reg = <0xb0000 0x100>; + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <1>; + }; + sdhci1: sdhci@d0000 { compatible = "marvell,armada-3700-sdhci", "marvell,sdhci-xenon"; diff --git a/arch/arm64/boot/dts/marvell/armada-7040-db.dts b/arch/arm64/boot/dts/marvell/armada-7040-db.dts index f34ee87a0f56..a7eb4e7697a2 100644 --- a/arch/arm64/boot/dts/marvell/armada-7040-db.dts +++ b/arch/arm64/boot/dts/marvell/armada-7040-db.dts @@ -73,16 +73,6 @@ gpio = <&expander0 1 GPIO_ACTIVE_HIGH>; vin-supply = <&cp0_exp_usb3_1_current_regulator>; }; - - cp0_usb3_0_phy: cp0-usb3-0-phy { - compatible = "usb-nop-xceiv"; - vcc-supply = <&cp0_reg_usb3_0_vbus>; - }; - - cp0_usb3_1_phy: cp0-usb3-1-phy { - compatible = "usb-nop-xceiv"; - vcc-supply = <&cp0_reg_usb3_1_vbus>; - }; }; &i2c0 { @@ -124,6 +114,8 @@ &cp0_pcie2 { status = "okay"; + phys = <&cp0_comphy5 2>; + phy-names = "cp0-pcie2-x1-phy"; }; &cp0_i2c0 { @@ -219,15 +211,36 @@ &cp0_sata0 { status = "okay"; + + sata-port@1 { + phys = <&cp0_comphy3 1>; + phy-names = "cp0-sata0-1-phy"; + }; +}; + +&cp0_comphy1 { + cp0_usbh0_con: connector { + compatible = "usb-a-connector"; + phy-supply = <&cp0_reg_usb3_0_vbus>; + }; }; &cp0_usb3_0 { - usb-phy = <&cp0_usb3_0_phy>; + phys = <&cp0_comphy1 0>; + phy-names = "cp0-usb3h0-comphy"; status = "okay"; }; +&cp0_comphy4 { + cp0_usbh1_con: connector { + compatible = "usb-a-connector"; + phy-supply = <&cp0_reg_usb3_1_vbus>; + }; +}; + &cp0_usb3_1 { - usb-phy = <&cp0_usb3_1_phy>; + phys = <&cp0_comphy4 1>; + phy-names = "cp0-usb3h1-comphy"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/marvell/armada-70x0.dtsi b/arch/arm64/boot/dts/marvell/armada-70x0.dtsi index e5c6d7c25819..293403a1a333 100644 --- a/arch/arm64/boot/dts/marvell/armada-70x0.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-70x0.dtsi @@ -17,23 +17,23 @@ /* * Instantiate the CP110 */ -#define CP110_NAME cp0 -#define CP110_BASE f2000000 -#define CP110_PCIE_IO_BASE 0xf9000000 -#define CP110_PCIE_MEM_BASE 0xf6000000 -#define CP110_PCIE0_BASE f2600000 -#define CP110_PCIE1_BASE f2620000 -#define CP110_PCIE2_BASE f2640000 +#define CP11X_NAME cp0 +#define CP11X_BASE f2000000 +#define CP11X_PCIEx_MEM_BASE(iface) (0xf6000000 + (iface * 0x1000000)) +#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000 +#define CP11X_PCIE0_BASE f2600000 +#define CP11X_PCIE1_BASE f2620000 +#define CP11X_PCIE2_BASE f2640000 #include "armada-cp110.dtsi" -#undef CP110_NAME -#undef CP110_BASE -#undef CP110_PCIE_IO_BASE -#undef CP110_PCIE_MEM_BASE -#undef CP110_PCIE0_BASE -#undef CP110_PCIE1_BASE -#undef CP110_PCIE2_BASE +#undef CP11X_NAME +#undef CP11X_BASE +#undef CP11X_PCIEx_MEM_BASE +#undef CP11X_PCIEx_MEM_SIZE +#undef CP11X_PCIE0_BASE +#undef CP11X_PCIE1_BASE +#undef CP11X_PCIE2_BASE &cp0_gpio1 { status = "okay"; diff --git a/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts b/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts index f275d9420d5b..a211a046b2f2 100644 --- a/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts +++ b/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts @@ -51,11 +51,6 @@ status = "okay"; }; - usb3h0_phy: usb3_phy0 { - compatible = "usb-nop-xceiv"; - vcc-supply = <&v_5v0_usb3_hst_vbus>; - }; - sfp_cp0_eth0: sfp-cp0-eth0 { compatible = "sff,sfp"; i2c-bus = <&cp0_i2c1>; @@ -243,6 +238,8 @@ pinctrl-names = "default"; pinctrl-0 = <&cp0_pci0_reset_pins &cp0_wlan_disable_pins>; reset-gpios = <&cp0_gpio2 0 GPIO_ACTIVE_LOW>; + phys = <&cp0_comphy0 0>; + phy-names = "cp0-pcie0-x1-phy"; status = "okay"; }; @@ -348,6 +345,11 @@ &cp1_sata0 { pinctrl-0 = <&cp0_pci1_reset_pins>; status = "okay"; + + sata-port@1 { + phys = <&cp1_comphy0 1>; + phy-names = "cp1-sata0-1-phy"; + }; }; &cp1_mdio { @@ -406,6 +408,8 @@ reg = <5>; label = "cpu"; ethernet = <&cp1_eth2>; + phy-mode = "2500base-x"; + managed = "in-band-status"; }; }; @@ -467,7 +471,15 @@ }; }; +&cp1_comphy2 { + cp1_usbh0_con: connector { + compatible = "usb-a-connector"; + phy-supply = <&v_5v0_usb3_hst_vbus>; + }; +}; + &cp1_usb3_0 { - usb-phy = <&usb3h0_phy>; + phys = <&cp1_comphy2 0>; + phy-names = "cp1-usb3h0-comphy"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/marvell/armada-8040-db.dts b/arch/arm64/boot/dts/marvell/armada-8040-db.dts index d6e9c014c2f9..09fb5256f1db 100644 --- a/arch/arm64/boot/dts/marvell/armada-8040-db.dts +++ b/arch/arm64/boot/dts/marvell/armada-8040-db.dts @@ -54,11 +54,6 @@ vcc-supply = <&cp0_reg_usb3_0_vbus>; }; - cp0_usb3_1_phy: cp0-usb3-1-phy { - compatible = "usb-nop-xceiv"; - vcc-supply = <&cp0_reg_usb3_1_vbus>; - }; - cp1_reg_usb3_0_vbus: cp1-usb3-0-vbus { compatible = "regulator-fixed"; regulator-name = "cp1-usb3h0-vbus"; @@ -108,11 +103,15 @@ /* CON6 on CP0 expansion */ &cp0_pcie0 { + phys = <&cp0_comphy0 0>; + phy-names = "cp0-pcie0-x1-phy"; status = "okay"; }; /* CON5 on CP0 expansion */ &cp0_pcie2 { + phys = <&cp0_comphy5 2>; + phy-names = "cp0-pcie2-x1-phy"; status = "okay"; }; @@ -143,6 +142,15 @@ /* CON4 on CP0 expansion */ &cp0_sata0 { status = "okay"; + + sata-port@0 { + phys = <&cp0_comphy1 0>; + phy-names = "cp0-sata0-0-phy"; + }; + sata-port@1 { + phys = <&cp0_comphy3 1>; + phy-names = "cp0-sata0-1-phy"; + }; }; /* CON9 on CP0 expansion */ @@ -151,9 +159,17 @@ status = "okay"; }; +&cp0_comphy4 { + cp0_usbh1_con: connector { + compatible = "usb-a-connector"; + phy-supply = <&cp0_reg_usb3_1_vbus>; + }; +}; + /* CON10 on CP0 expansion */ &cp0_usb3_1 { - usb-phy = <&cp0_usb3_1_phy>; + phys = <&cp0_comphy4 1>; + phy-names = "cp0-usb3h1-comphy"; status = "okay"; }; @@ -187,16 +203,22 @@ /* CON6 on CP1 expansion */ &cp1_pcie0 { + phys = <&cp1_comphy0 0>; + phy-names = "cp1-pcie0-x1-phy"; status = "okay"; }; /* CON7 on CP1 expansion */ &cp1_pcie1 { + phys = <&cp1_comphy4 1>; + phy-names = "cp1-pcie1-x1-phy"; status = "okay"; }; /* CON5 on CP1 expansion */ &cp1_pcie2 { + phys = <&cp1_comphy5 2>; + phy-names = "cp1-pcie2-x1-phy"; status = "okay"; }; @@ -273,6 +295,15 @@ /* CON4 on CP1 expansion */ &cp1_sata0 { status = "okay"; + + sata-port@0 { + phys = <&cp1_comphy1 0>; + phy-names = "cp1-sata0-0-phy"; + }; + sata-port@1 { + phys = <&cp1_comphy3 1>; + phy-names = "cp1-sata0-1-phy"; + }; }; /* CON9 on CP1 expansion */ diff --git a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi index 205071b45a32..572e2610e0a3 100644 --- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi @@ -61,11 +61,6 @@ status = "okay"; }; - usb3h0_phy: usb3_phy0 { - compatible = "usb-nop-xceiv"; - vcc-supply = <&v_5v0_usb3_hst_vbus>; - }; - sfp_eth0: sfp-eth0 { /* CON15,16 - CPM lane 4 */ compatible = "sff,sfp"; @@ -184,8 +179,11 @@ num-lanes = <4>; num-viewport = <8>; reset-gpios = <&cp0_gpio2 20 GPIO_ACTIVE_LOW>; - ranges = <0x81000000 0x0 0xf9010000 0x0 0xf9010000 0x0 0x10000 - 0x82000000 0x0 0xc0000000 0x0 0xc0000000 0x0 0x20000000>; + ranges = <0x82000000 0x0 0xc0000000 0x0 0xc0000000 0x0 0x20000000>; + phys = <&cp0_comphy0 0>, <&cp0_comphy1 0>, + <&cp0_comphy2 0>, <&cp0_comphy3 0>; + phy-names = "cp0-pcie0-x4-lane0-phy", "cp0-pcie0-x4-lane1-phy", + "cp0-pcie0-x4-lane2-phy", "cp0-pcie0-x4-lane3-phy"; status = "okay"; }; @@ -239,8 +237,13 @@ }; &cp0_sata0 { - /* CPM Lane 0 - U29 */ status = "okay"; + + /* CPM Lane 5 - U29 */ + sata-port@1 { + phys = <&cp0_comphy5 1>; + phy-names = "cp0-sata0-1-phy"; + }; }; &cp0_sdhci0 { @@ -324,9 +327,19 @@ }; &cp1_sata0 { + status = "okay"; + /* CPS Lane 1 - U32 */ + sata-port@0 { + phys = <&cp1_comphy1 0>; + phy-names = "cp1-sata0-0-phy"; + }; + /* CPS Lane 3 - U31 */ - status = "okay"; + sata-port@1 { + phys = <&cp1_comphy3 1>; + phy-names = "cp1-sata0-1-phy"; + }; }; &cp1_spi1 { @@ -341,8 +354,16 @@ }; }; +&cp1_comphy2 { + cp1_usbh0_con: connector { + compatible = "usb-a-connector"; + phy-supply = <&v_5v0_usb3_hst_vbus>; + }; +}; + &cp1_usb3_0 { /* CPS Lane 2 - CON7 */ - usb-phy = <&usb3h0_phy>; + phys = <&cp1_comphy2 0>; + phy-names = "cp1-usb3h0-comphy"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/marvell/armada-80x0.dtsi b/arch/arm64/boot/dts/marvell/armada-80x0.dtsi index 8129b40f12a4..ee67c70bf02e 100644 --- a/arch/arm64/boot/dts/marvell/armada-80x0.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-80x0.dtsi @@ -19,44 +19,44 @@ /* * Instantiate the master CP110 */ -#define CP110_NAME cp0 -#define CP110_BASE f2000000 -#define CP110_PCIE_IO_BASE 0xf9000000 -#define CP110_PCIE_MEM_BASE 0xf6000000 -#define CP110_PCIE0_BASE f2600000 -#define CP110_PCIE1_BASE f2620000 -#define CP110_PCIE2_BASE f2640000 +#define CP11X_NAME cp0 +#define CP11X_BASE f2000000 +#define CP11X_PCIEx_MEM_BASE(iface) (0xf6000000 + (iface * 0x1000000)) +#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000 +#define CP11X_PCIE0_BASE f2600000 +#define CP11X_PCIE1_BASE f2620000 +#define CP11X_PCIE2_BASE f2640000 #include "armada-cp110.dtsi" -#undef CP110_NAME -#undef CP110_BASE -#undef CP110_PCIE_IO_BASE -#undef CP110_PCIE_MEM_BASE -#undef CP110_PCIE0_BASE -#undef CP110_PCIE1_BASE -#undef CP110_PCIE2_BASE +#undef CP11X_NAME +#undef CP11X_BASE +#undef CP11X_PCIEx_MEM_BASE +#undef CP11X_PCIEx_MEM_SIZE +#undef CP11X_PCIE0_BASE +#undef CP11X_PCIE1_BASE +#undef CP11X_PCIE2_BASE /* * Instantiate the slave CP110 */ -#define CP110_NAME cp1 -#define CP110_BASE f4000000 -#define CP110_PCIE_IO_BASE 0xfd000000 -#define CP110_PCIE_MEM_BASE 0xfa000000 -#define CP110_PCIE0_BASE f4600000 -#define CP110_PCIE1_BASE f4620000 -#define CP110_PCIE2_BASE f4640000 +#define CP11X_NAME cp1 +#define CP11X_BASE f4000000 +#define CP11X_PCIEx_MEM_BASE(iface) (0xfa000000 + (iface * 0x1000000)) +#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000 +#define CP11X_PCIE0_BASE f4600000 +#define CP11X_PCIE1_BASE f4620000 +#define CP11X_PCIE2_BASE f4640000 #include "armada-cp110.dtsi" -#undef CP110_NAME -#undef CP110_BASE -#undef CP110_PCIE_IO_BASE -#undef CP110_PCIE_MEM_BASE -#undef CP110_PCIE0_BASE -#undef CP110_PCIE1_BASE -#undef CP110_PCIE2_BASE +#undef CP11X_NAME +#undef CP11X_BASE +#undef CP11X_PCIEx_MEM_BASE +#undef CP11X_PCIEx_MEM_SIZE +#undef CP11X_PCIE0_BASE +#undef CP11X_PCIE1_BASE +#undef CP11X_PCIE2_BASE /* The 80x0 has two CP blocks, but uses only one block from each. */ &cp1_gpio1 { diff --git a/arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi index 9024a2d9db07..09849558a776 100644 --- a/arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi @@ -21,6 +21,14 @@ reg = <0x000>; enable-method = "psci"; #cooling-cells = <2>; + clocks = <&cpu_clk 0>; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&l2>; }; cpu1: cpu@1 { device_type = "cpu"; @@ -28,6 +36,21 @@ reg = <0x001>; enable-method = "psci"; #cooling-cells = <2>; + clocks = <&cpu_clk 0>; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&l2>; + }; + + l2: l2-cache { + compatible = "cache"; + cache-size = <0x80000>; + cache-line-size = <64>; + cache-sets = <512>; }; }; }; diff --git a/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi index ea13ae78f50d..3db427122f9e 100644 --- a/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi @@ -21,6 +21,14 @@ reg = <0x000>; enable-method = "psci"; #cooling-cells = <2>; + clocks = <&cpu_clk 0>; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&l2_0>; }; cpu1: cpu@1 { device_type = "cpu"; @@ -28,6 +36,14 @@ reg = <0x001>; enable-method = "psci"; #cooling-cells = <2>; + clocks = <&cpu_clk 0>; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&l2_0>; }; cpu2: cpu@100 { device_type = "cpu"; @@ -35,6 +51,14 @@ reg = <0x100>; enable-method = "psci"; #cooling-cells = <2>; + clocks = <&cpu_clk 1>; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&l2_1>; }; cpu3: cpu@101 { device_type = "cpu"; @@ -42,7 +66,28 @@ reg = <0x101>; enable-method = "psci"; #cooling-cells = <2>; + clocks = <&cpu_clk 1>; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&l2_1>; + }; + + l2_0: l2-cache0 { + compatible = "cache"; + cache-size = <0x80000>; + cache-line-size = <64>; + cache-sets = <512>; }; - }; + l2_1: l2-cache1 { + compatible = "cache"; + cache-size = <0x80000>; + cache-line-size = <64>; + cache-sets = <512>; + }; + }; }; diff --git a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi index 96228f93b272..866628679ac7 100644 --- a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi @@ -5,447 +5,26 @@ * Device Tree file for Marvell Armada AP806. */ -#include <dt-bindings/interrupt-controller/arm-gic.h> -#include <dt-bindings/thermal/thermal.h> - -/dts-v1/; +#define AP_NAME ap806 +#include "armada-ap80x.dtsi" / { model = "Marvell Armada AP806"; compatible = "marvell,armada-ap806"; - #address-cells = <2>; - #size-cells = <2>; - - aliases { - serial0 = &uart0; - serial1 = &uart1; - gpio0 = &ap_gpio; - spi0 = &spi0; - }; - - psci { - compatible = "arm,psci-0.2"; - method = "smc"; - }; - - reserved-memory { - #address-cells = <2>; - #size-cells = <2>; - ranges; - - /* - * This area matches the mapping done with a - * mainline U-Boot, and should be updated by the - * bootloader. - */ - - psci-area@4000000 { - reg = <0x0 0x4000000 0x0 0x200000>; - no-map; - }; - }; - - ap806 { - #address-cells = <2>; - #size-cells = <2>; - compatible = "simple-bus"; - interrupt-parent = <&gic>; - ranges; - - config-space@f0000000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "simple-bus"; - ranges = <0x0 0x0 0xf0000000 0x1000000>; - - gic: interrupt-controller@210000 { - compatible = "arm,gic-400"; - #interrupt-cells = <3>; - #address-cells = <1>; - #size-cells = <1>; - ranges; - interrupt-controller; - interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; - reg = <0x210000 0x10000>, - <0x220000 0x20000>, - <0x240000 0x20000>, - <0x260000 0x20000>; - - gic_v2m0: v2m@280000 { - compatible = "arm,gic-v2m-frame"; - msi-controller; - reg = <0x280000 0x1000>; - arm,msi-base-spi = <160>; - arm,msi-num-spis = <32>; - }; - gic_v2m1: v2m@290000 { - compatible = "arm,gic-v2m-frame"; - msi-controller; - reg = <0x290000 0x1000>; - arm,msi-base-spi = <192>; - arm,msi-num-spis = <32>; - }; - gic_v2m2: v2m@2a0000 { - compatible = "arm,gic-v2m-frame"; - msi-controller; - reg = <0x2a0000 0x1000>; - arm,msi-base-spi = <224>; - arm,msi-num-spis = <32>; - }; - gic_v2m3: v2m@2b0000 { - compatible = "arm,gic-v2m-frame"; - msi-controller; - reg = <0x2b0000 0x1000>; - arm,msi-base-spi = <256>; - arm,msi-num-spis = <32>; - }; - }; - - timer { - compatible = "arm,armv8-timer"; - interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; - }; - - pmu { - compatible = "arm,cortex-a72-pmu"; - interrupt-parent = <&pic>; - interrupts = <17>; - }; - - odmi: odmi@300000 { - compatible = "marvell,odmi-controller"; - interrupt-controller; - msi-controller; - marvell,odmi-frames = <4>; - reg = <0x300000 0x4000>, - <0x304000 0x4000>, - <0x308000 0x4000>, - <0x30C000 0x4000>; - marvell,spi-base = <128>, <136>, <144>, <152>; - }; - - gicp: gicp@3f0040 { - compatible = "marvell,ap806-gicp"; - reg = <0x3f0040 0x10>; - marvell,spi-ranges = <64 64>, <288 64>; - msi-controller; - }; - - pic: interrupt-controller@3f0100 { - compatible = "marvell,armada-8k-pic"; - reg = <0x3f0100 0x10>; - #interrupt-cells = <1>; - interrupt-controller; - interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>; - }; - - sei: interrupt-controller@3f0200 { - compatible = "marvell,ap806-sei"; - reg = <0x3f0200 0x40>; - interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; - #interrupt-cells = <1>; - interrupt-controller; - msi-controller; - }; - - xor@400000 { - compatible = "marvell,armada-7k-xor", "marvell,xor-v2"; - reg = <0x400000 0x1000>, - <0x410000 0x1000>; - msi-parent = <&gic_v2m0>; - clocks = <&ap_clk 3>; - dma-coherent; - }; - - xor@420000 { - compatible = "marvell,armada-7k-xor", "marvell,xor-v2"; - reg = <0x420000 0x1000>, - <0x430000 0x1000>; - msi-parent = <&gic_v2m0>; - clocks = <&ap_clk 3>; - dma-coherent; - }; - - xor@440000 { - compatible = "marvell,armada-7k-xor", "marvell,xor-v2"; - reg = <0x440000 0x1000>, - <0x450000 0x1000>; - msi-parent = <&gic_v2m0>; - clocks = <&ap_clk 3>; - dma-coherent; - }; - - xor@460000 { - compatible = "marvell,armada-7k-xor", "marvell,xor-v2"; - reg = <0x460000 0x1000>, - <0x470000 0x1000>; - msi-parent = <&gic_v2m0>; - clocks = <&ap_clk 3>; - dma-coherent; - }; - - spi0: spi@510600 { - compatible = "marvell,armada-380-spi"; - reg = <0x510600 0x50>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&ap_clk 3>; - status = "disabled"; - }; - - i2c0: i2c@511000 { - compatible = "marvell,mv78230-i2c"; - reg = <0x511000 0x20>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; - timeout-ms = <1000>; - clocks = <&ap_clk 3>; - status = "disabled"; - }; - - uart0: serial@512000 { - compatible = "snps,dw-apb-uart"; - reg = <0x512000 0x100>; - reg-shift = <2>; - interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; - reg-io-width = <1>; - clocks = <&ap_clk 3>; - status = "disabled"; - }; - - uart1: serial@512100 { - compatible = "snps,dw-apb-uart"; - reg = <0x512100 0x100>; - reg-shift = <2>; - interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; - reg-io-width = <1>; - clocks = <&ap_clk 3>; - status = "disabled"; - - }; - - watchdog: watchdog@610000 { - compatible = "arm,sbsa-gwdt"; - reg = <0x610000 0x1000>, <0x600000 0x1000>; - interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; - }; - - ap_sdhci0: sdhci@6e0000 { - compatible = "marvell,armada-ap806-sdhci"; - reg = <0x6e0000 0x300>; - interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "core"; - clocks = <&ap_clk 4>; - dma-coherent; - marvell,xenon-phy-slow-mode; - status = "disabled"; - }; - - ap_syscon: system-controller@6f4000 { - compatible = "syscon", "simple-mfd"; - reg = <0x6f4000 0x2000>; - - ap_clk: clock { - compatible = "marvell,ap806-clock"; - #clock-cells = <1>; - }; - - ap_pinctrl: pinctrl { - compatible = "marvell,ap806-pinctrl"; - - uart0_pins: uart0-pins { - marvell,pins = "mpp11", "mpp19"; - marvell,function = "uart0"; - }; - }; - - ap_gpio: gpio@1040 { - compatible = "marvell,armada-8k-gpio"; - offset = <0x1040>; - ngpios = <20>; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&ap_pinctrl 0 0 20>; - }; - }; - - ap_syscon1: system-controller@6f8000 { - compatible = "syscon", "simple-mfd"; - reg = <0x6f8000 0x1000>; - #address-cells = <1>; - #size-cells = <1>; +}; - ap_thermal: thermal-sensor@80 { - compatible = "marvell,armada-ap806-thermal"; - reg = <0x80 0x10>; - interrupt-parent = <&sei>; - interrupts = <18>; - #thermal-sensor-cells = <1>; - }; - }; - }; +&ap_syscon0 { + ap_clk: clock { + compatible = "marvell,ap806-clock"; + #clock-cells = <1>; }; +}; - /* - * The thermal IP features one internal sensor plus, if applicable, one - * remote channel wired to one sensor per CPU. - * - * Only one thermal zone per AP/CP may trigger interrupts at a time, the - * first one that will have a critical trip point will be chosen. - */ - thermal-zones { - ap_thermal_ic: ap-thermal-ic { - polling-delay-passive = <0>; /* Interrupt driven */ - polling-delay = <0>; /* Interrupt driven */ - - thermal-sensors = <&ap_thermal 0>; - - trips { - ap_crit: ap-crit { - temperature = <100000>; /* mC degrees */ - hysteresis = <2000>; /* mC degrees */ - type = "critical"; - }; - }; - - cooling-maps { }; - }; - - ap_thermal_cpu0: ap-thermal-cpu0 { - polling-delay-passive = <1000>; - polling-delay = <1000>; - - thermal-sensors = <&ap_thermal 1>; - - trips { - cpu0_hot: cpu0-hot { - temperature = <85000>; - hysteresis = <2000>; - type = "passive"; - }; - cpu0_emerg: cpu0-emerg { - temperature = <95000>; - hysteresis = <2000>; - type = "passive"; - }; - }; - - cooling-maps { - map0_hot: map0-hot { - trip = <&cpu0_hot>; - cooling-device = <&cpu0 1 2>, - <&cpu1 1 2>; - }; - map0_emerg: map0-ermerg { - trip = <&cpu0_emerg>; - cooling-device = <&cpu0 3 3>, - <&cpu1 3 3>; - }; - }; - }; - - ap_thermal_cpu1: ap-thermal-cpu1 { - polling-delay-passive = <1000>; - polling-delay = <1000>; - - thermal-sensors = <&ap_thermal 2>; - - trips { - cpu1_hot: cpu1-hot { - temperature = <85000>; - hysteresis = <2000>; - type = "passive"; - }; - cpu1_emerg: cpu1-emerg { - temperature = <95000>; - hysteresis = <2000>; - type = "passive"; - }; - }; - - cooling-maps { - map1_hot: map1-hot { - trip = <&cpu1_hot>; - cooling-device = <&cpu0 1 2>, - <&cpu1 1 2>; - }; - map1_emerg: map1-emerg { - trip = <&cpu1_emerg>; - cooling-device = <&cpu0 3 3>, - <&cpu1 3 3>; - }; - }; - }; - - ap_thermal_cpu2: ap-thermal-cpu2 { - polling-delay-passive = <1000>; - polling-delay = <1000>; - - thermal-sensors = <&ap_thermal 3>; - - trips { - cpu2_hot: cpu2-hot { - temperature = <85000>; - hysteresis = <2000>; - type = "passive"; - }; - cpu2_emerg: cpu2-emerg { - temperature = <95000>; - hysteresis = <2000>; - type = "passive"; - }; - }; - - cooling-maps { - map2_hot: map2-hot { - trip = <&cpu2_hot>; - cooling-device = <&cpu2 1 2>, - <&cpu3 1 2>; - }; - map2_emerg: map2-emerg { - trip = <&cpu2_emerg>; - cooling-device = <&cpu2 3 3>, - <&cpu3 3 3>; - }; - }; - }; - - ap_thermal_cpu3: ap-thermal-cpu3 { - polling-delay-passive = <1000>; - polling-delay = <1000>; - - thermal-sensors = <&ap_thermal 4>; - - trips { - cpu3_hot: cpu3-hot { - temperature = <85000>; - hysteresis = <2000>; - type = "passive"; - }; - cpu3_emerg: cpu3-emerg { - temperature = <95000>; - hysteresis = <2000>; - type = "passive"; - }; - }; - - cooling-maps { - map3_hot: map3-bhot { - trip = <&cpu3_hot>; - cooling-device = <&cpu2 1 2>, - <&cpu3 1 2>; - }; - map3_emerg: map3-emerg { - trip = <&cpu3_emerg>; - cooling-device = <&cpu2 3 3>, - <&cpu3 3 3>; - }; - }; - }; +&ap_syscon1 { + cpu_clk: clock-cpu@278 { + compatible = "marvell,ap806-cpu-clock"; + clocks = <&ap_clk 0>, <&ap_clk 1>; + #clock-cells = <1>; + reg = <0x278 0xa30>; }; }; diff --git a/arch/arm64/boot/dts/marvell/armada-ap807-quad.dtsi b/arch/arm64/boot/dts/marvell/armada-ap807-quad.dtsi new file mode 100644 index 000000000000..840466e143b4 --- /dev/null +++ b/arch/arm64/boot/dts/marvell/armada-ap807-quad.dtsi @@ -0,0 +1,93 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree file for Marvell Armada AP807 Quad + * + * Copyright (C) 2019 Marvell Technology Group Ltd. + */ + +#include "armada-ap807.dtsi" + +/ { + model = "Marvell Armada AP807 Quad"; + compatible = "marvell,armada-ap807-quad", "marvell,armada-ap807"; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x000>; + enable-method = "psci"; + #cooling-cells = <2>; + clocks = <&cpu_clk 0>; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&l2_0>; + }; + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x001>; + enable-method = "psci"; + #cooling-cells = <2>; + clocks = <&cpu_clk 0>; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&l2_0>; + }; + cpu2: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x100>; + enable-method = "psci"; + #cooling-cells = <2>; + clocks = <&cpu_clk 1>; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&l2_1>; + }; + cpu3: cpu@101 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x101>; + enable-method = "psci"; + #cooling-cells = <2>; + clocks = <&cpu_clk 1>; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&l2_1>; + }; + + l2_0: l2-cache0 { + compatible = "cache"; + cache-size = <0x80000>; + cache-line-size = <64>; + cache-sets = <512>; + }; + + l2_1: l2-cache1 { + compatible = "cache"; + cache-size = <0x80000>; + cache-line-size = <64>; + cache-sets = <512>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/marvell/armada-ap807.dtsi b/arch/arm64/boot/dts/marvell/armada-ap807.dtsi new file mode 100644 index 000000000000..623010f3ca89 --- /dev/null +++ b/arch/arm64/boot/dts/marvell/armada-ap807.dtsi @@ -0,0 +1,29 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree file for Marvell Armada AP807 + * + * Copyright (C) 2019 Marvell Technology Group Ltd. + */ + +#define AP_NAME ap807 +#include "armada-ap80x.dtsi" + +/ { + model = "Marvell Armada AP807"; + compatible = "marvell,armada-ap807"; +}; + +&ap_syscon0 { + ap_clk: clock { + compatible = "marvell,ap807-clock"; + #clock-cells = <1>; + }; +}; + +&ap_syscon1 { + cpu_clk: clock-cpu { + compatible = "marvell,ap807-cpu-clock"; + clocks = <&ap_clk 0>, <&ap_clk 1>; + #clock-cells = <1>; + }; +}; diff --git a/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi b/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi new file mode 100644 index 000000000000..e7438c21ccee --- /dev/null +++ b/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi @@ -0,0 +1,444 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2019 Marvell Technology Group Ltd. + * + * Device Tree file for Marvell Armada AP80x. + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/thermal/thermal.h> + +/dts-v1/; + +/ { + #address-cells = <2>; + #size-cells = <2>; + + aliases { + serial0 = &uart0; + serial1 = &uart1; + gpio0 = &ap_gpio; + spi0 = &spi0; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + /* + * This area matches the mapping done with a + * mainline U-Boot, and should be updated by the + * bootloader. + */ + + psci-area@4000000 { + reg = <0x0 0x4000000 0x0 0x200000>; + no-map; + }; + }; + + AP_NAME { + #address-cells = <2>; + #size-cells = <2>; + compatible = "simple-bus"; + interrupt-parent = <&gic>; + ranges; + + config-space@f0000000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges = <0x0 0x0 0xf0000000 0x1000000>; + + gic: interrupt-controller@210000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + interrupt-controller; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + reg = <0x210000 0x10000>, + <0x220000 0x20000>, + <0x240000 0x20000>, + <0x260000 0x20000>; + + gic_v2m0: v2m@280000 { + compatible = "arm,gic-v2m-frame"; + msi-controller; + reg = <0x280000 0x1000>; + arm,msi-base-spi = <160>; + arm,msi-num-spis = <32>; + }; + gic_v2m1: v2m@290000 { + compatible = "arm,gic-v2m-frame"; + msi-controller; + reg = <0x290000 0x1000>; + arm,msi-base-spi = <192>; + arm,msi-num-spis = <32>; + }; + gic_v2m2: v2m@2a0000 { + compatible = "arm,gic-v2m-frame"; + msi-controller; + reg = <0x2a0000 0x1000>; + arm,msi-base-spi = <224>; + arm,msi-num-spis = <32>; + }; + gic_v2m3: v2m@2b0000 { + compatible = "arm,gic-v2m-frame"; + msi-controller; + reg = <0x2b0000 0x1000>; + arm,msi-base-spi = <256>; + arm,msi-num-spis = <32>; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + }; + + pmu { + compatible = "arm,cortex-a72-pmu"; + interrupt-parent = <&pic>; + interrupts = <17>; + }; + + odmi: odmi@300000 { + compatible = "marvell,odmi-controller"; + interrupt-controller; + msi-controller; + marvell,odmi-frames = <4>; + reg = <0x300000 0x4000>, + <0x304000 0x4000>, + <0x308000 0x4000>, + <0x30C000 0x4000>; + marvell,spi-base = <128>, <136>, <144>, <152>; + }; + + gicp: gicp@3f0040 { + compatible = "marvell,ap806-gicp"; + reg = <0x3f0040 0x10>; + marvell,spi-ranges = <64 64>, <288 64>; + msi-controller; + }; + + pic: interrupt-controller@3f0100 { + compatible = "marvell,armada-8k-pic"; + reg = <0x3f0100 0x10>; + #interrupt-cells = <1>; + interrupt-controller; + interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>; + }; + + sei: interrupt-controller@3f0200 { + compatible = "marvell,ap806-sei"; + reg = <0x3f0200 0x40>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <1>; + interrupt-controller; + msi-controller; + }; + + xor@400000 { + compatible = "marvell,armada-7k-xor", "marvell,xor-v2"; + reg = <0x400000 0x1000>, + <0x410000 0x1000>; + msi-parent = <&gic_v2m0>; + clocks = <&ap_clk 3>; + dma-coherent; + }; + + xor@420000 { + compatible = "marvell,armada-7k-xor", "marvell,xor-v2"; + reg = <0x420000 0x1000>, + <0x430000 0x1000>; + msi-parent = <&gic_v2m0>; + clocks = <&ap_clk 3>; + dma-coherent; + }; + + xor@440000 { + compatible = "marvell,armada-7k-xor", "marvell,xor-v2"; + reg = <0x440000 0x1000>, + <0x450000 0x1000>; + msi-parent = <&gic_v2m0>; + clocks = <&ap_clk 3>; + dma-coherent; + }; + + xor@460000 { + compatible = "marvell,armada-7k-xor", "marvell,xor-v2"; + reg = <0x460000 0x1000>, + <0x470000 0x1000>; + msi-parent = <&gic_v2m0>; + clocks = <&ap_clk 3>; + dma-coherent; + }; + + spi0: spi@510600 { + compatible = "marvell,armada-380-spi"; + reg = <0x510600 0x50>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ap_clk 3>; + status = "disabled"; + }; + + i2c0: i2c@511000 { + compatible = "marvell,mv78230-i2c"; + reg = <0x511000 0x20>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + timeout-ms = <1000>; + clocks = <&ap_clk 3>; + status = "disabled"; + }; + + uart0: serial@512000 { + compatible = "snps,dw-apb-uart"; + reg = <0x512000 0x100>; + reg-shift = <2>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + reg-io-width = <1>; + clocks = <&ap_clk 3>; + status = "disabled"; + }; + + uart1: serial@512100 { + compatible = "snps,dw-apb-uart"; + reg = <0x512100 0x100>; + reg-shift = <2>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + reg-io-width = <1>; + clocks = <&ap_clk 3>; + status = "disabled"; + + }; + + watchdog: watchdog@610000 { + compatible = "arm,sbsa-gwdt"; + reg = <0x610000 0x1000>, <0x600000 0x1000>; + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; + }; + + ap_sdhci0: sdhci@6e0000 { + compatible = "marvell,armada-ap806-sdhci"; + reg = <0x6e0000 0x300>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "core"; + clocks = <&ap_clk 4>; + dma-coherent; + marvell,xenon-phy-slow-mode; + status = "disabled"; + }; + + ap_syscon0: system-controller@6f4000 { + compatible = "syscon", "simple-mfd"; + reg = <0x6f4000 0x2000>; + + ap_pinctrl: pinctrl { + compatible = "marvell,ap806-pinctrl"; + + uart0_pins: uart0-pins { + marvell,pins = "mpp11", "mpp19"; + marvell,function = "uart0"; + }; + }; + + ap_gpio: gpio@1040 { + compatible = "marvell,armada-8k-gpio"; + offset = <0x1040>; + ngpios = <20>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&ap_pinctrl 0 0 20>; + }; + }; + + ap_syscon1: system-controller@6f8000 { + compatible = "syscon", "simple-mfd"; + reg = <0x6f8000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + + ap_thermal: thermal-sensor@80 { + compatible = "marvell,armada-ap806-thermal"; + reg = <0x80 0x10>; + interrupt-parent = <&sei>; + interrupts = <18>; + #thermal-sensor-cells = <1>; + }; + }; + }; + }; + + /* + * The thermal IP features one internal sensor plus, if applicable, one + * remote channel wired to one sensor per CPU. + * + * Only one thermal zone per AP/CP may trigger interrupts at a time, the + * first one that will have a critical trip point will be chosen. + */ + thermal-zones { + ap_thermal_ic: ap-thermal-ic { + polling-delay-passive = <0>; /* Interrupt driven */ + polling-delay = <0>; /* Interrupt driven */ + + thermal-sensors = <&ap_thermal 0>; + + trips { + ap_crit: ap-crit { + temperature = <100000>; /* mC degrees */ + hysteresis = <2000>; /* mC degrees */ + type = "critical"; + }; + }; + + cooling-maps { }; + }; + + ap_thermal_cpu0: ap-thermal-cpu0 { + polling-delay-passive = <1000>; + polling-delay = <1000>; + + thermal-sensors = <&ap_thermal 1>; + + trips { + cpu0_hot: cpu0-hot { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu0_emerg: cpu0-emerg { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + }; + + cooling-maps { + map0_hot: map0-hot { + trip = <&cpu0_hot>; + cooling-device = <&cpu0 1 2>, + <&cpu1 1 2>; + }; + map0_emerg: map0-ermerg { + trip = <&cpu0_emerg>; + cooling-device = <&cpu0 3 3>, + <&cpu1 3 3>; + }; + }; + }; + + ap_thermal_cpu1: ap-thermal-cpu1 { + polling-delay-passive = <1000>; + polling-delay = <1000>; + + thermal-sensors = <&ap_thermal 2>; + + trips { + cpu1_hot: cpu1-hot { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu1_emerg: cpu1-emerg { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + }; + + cooling-maps { + map1_hot: map1-hot { + trip = <&cpu1_hot>; + cooling-device = <&cpu0 1 2>, + <&cpu1 1 2>; + }; + map1_emerg: map1-emerg { + trip = <&cpu1_emerg>; + cooling-device = <&cpu0 3 3>, + <&cpu1 3 3>; + }; + }; + }; + + ap_thermal_cpu2: ap-thermal-cpu2 { + polling-delay-passive = <1000>; + polling-delay = <1000>; + + thermal-sensors = <&ap_thermal 3>; + + trips { + cpu2_hot: cpu2-hot { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu2_emerg: cpu2-emerg { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + }; + + cooling-maps { + map2_hot: map2-hot { + trip = <&cpu2_hot>; + cooling-device = <&cpu2 1 2>, + <&cpu3 1 2>; + }; + map2_emerg: map2-emerg { + trip = <&cpu2_emerg>; + cooling-device = <&cpu2 3 3>, + <&cpu3 3 3>; + }; + }; + }; + + ap_thermal_cpu3: ap-thermal-cpu3 { + polling-delay-passive = <1000>; + polling-delay = <1000>; + + thermal-sensors = <&ap_thermal 4>; + + trips { + cpu3_hot: cpu3-hot { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu3_emerg: cpu3-emerg { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + }; + + cooling-maps { + map3_hot: map3-bhot { + trip = <&cpu3_hot>; + cooling-device = <&cpu2 1 2>, + <&cpu3 1 2>; + }; + map3_emerg: map3-emerg { + trip = <&cpu3_emerg>; + cooling-device = <&cpu2 3 3>, + <&cpu3 3 3>; + }; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/marvell/armada-common.dtsi b/arch/arm64/boot/dts/marvell/armada-common.dtsi index b29c6405d214..c04c6c475022 100644 --- a/arch/arm64/boot/dts/marvell/armada-common.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-common.dtsi @@ -6,6 +6,6 @@ /* Common definitions used by Armada 7K/8K DTs */ #define PASTER(x, y) x ## y #define EVALUATOR(x, y) PASTER(x, y) -#define CP110_LABEL(name) EVALUATOR(CP110_NAME, EVALUATOR(_, name)) -#define CP110_NODE_NAME(name) EVALUATOR(CP110_NAME, EVALUATOR(-, name)) +#define CP11X_LABEL(name) EVALUATOR(CP11X_NAME, EVALUATOR(_, name)) +#define CP11X_NODE_NAME(name) EVALUATOR(CP11X_NAME, EVALUATOR(-, name)) #define ADDRESSIFY(addr) EVALUATOR(0x, addr) diff --git a/arch/arm64/boot/dts/marvell/armada-cp110.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110.dtsi index f71afb1de18f..4fd33b0fa56e 100644 --- a/arch/arm64/boot/dts/marvell/armada-cp110.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-cp110.dtsi @@ -1,566 +1,12 @@ // SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* - * Copyright (C) 2016 Marvell Technology Group Ltd. + * Copyright (C) 2019 Marvell Technology Group Ltd. * * Device Tree file for Marvell Armada CP110. */ -#include <dt-bindings/interrupt-controller/mvebu-icu.h> -#include <dt-bindings/thermal/thermal.h> +#define CP11X_TYPE cp110 -#include "armada-common.dtsi" +#include "armada-cp11x.dtsi" -#define CP110_PCIEx_IO_BASE(iface) (CP110_PCIE_IO_BASE + (iface * 0x10000)) -#define CP110_PCIEx_MEM_BASE(iface) (CP110_PCIE_MEM_BASE + (iface * 0x1000000)) -#define CP110_PCIEx_CONF_BASE(iface) (CP110_PCIEx_MEM_BASE(iface) + 0xf00000) - -/ { - /* - * The contents of the node are defined below, in order to - * save one indentation level - */ - CP110_NAME: CP110_NAME { }; - - /* - * CPs only have one sensor in the thermal IC. - * - * The cooling maps are empty as there are no cooling devices. - */ - thermal-zones { - CP110_LABEL(thermal_ic): CP110_NODE_NAME(thermal-ic) { - polling-delay-passive = <0>; /* Interrupt driven */ - polling-delay = <0>; /* Interrupt driven */ - - thermal-sensors = <&CP110_LABEL(thermal) 0>; - - trips { - CP110_LABEL(crit): crit { - temperature = <100000>; /* mC degrees */ - hysteresis = <2000>; /* mC degrees */ - type = "critical"; - }; - }; - - cooling-maps { }; - }; - }; -}; - -&CP110_NAME { - #address-cells = <2>; - #size-cells = <2>; - compatible = "simple-bus"; - interrupt-parent = <&CP110_LABEL(icu_nsr)>; - ranges; - - config-space@CP110_BASE { - #address-cells = <1>; - #size-cells = <1>; - compatible = "simple-bus"; - ranges = <0x0 0x0 ADDRESSIFY(CP110_BASE) 0x2000000>; - - CP110_LABEL(ethernet): ethernet@0 { - compatible = "marvell,armada-7k-pp22"; - reg = <0x0 0x100000>, <0x129000 0xb000>; - clocks = <&CP110_LABEL(clk) 1 3>, <&CP110_LABEL(clk) 1 9>, - <&CP110_LABEL(clk) 1 5>, <&CP110_LABEL(clk) 1 6>, - <&CP110_LABEL(clk) 1 18>; - clock-names = "pp_clk", "gop_clk", - "mg_clk", "mg_core_clk", "axi_clk"; - marvell,system-controller = <&CP110_LABEL(syscon0)>; - status = "disabled"; - dma-coherent; - - CP110_LABEL(eth0): eth0 { - interrupts = <39 IRQ_TYPE_LEVEL_HIGH>, - <43 IRQ_TYPE_LEVEL_HIGH>, - <47 IRQ_TYPE_LEVEL_HIGH>, - <51 IRQ_TYPE_LEVEL_HIGH>, - <55 IRQ_TYPE_LEVEL_HIGH>, - <59 IRQ_TYPE_LEVEL_HIGH>, - <63 IRQ_TYPE_LEVEL_HIGH>, - <67 IRQ_TYPE_LEVEL_HIGH>, - <71 IRQ_TYPE_LEVEL_HIGH>, - <129 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "hif0", "hif1", "hif2", - "hif3", "hif4", "hif5", "hif6", "hif7", - "hif8", "link"; - port-id = <0>; - gop-port-id = <0>; - status = "disabled"; - }; - - CP110_LABEL(eth1): eth1 { - interrupts = <40 IRQ_TYPE_LEVEL_HIGH>, - <44 IRQ_TYPE_LEVEL_HIGH>, - <48 IRQ_TYPE_LEVEL_HIGH>, - <52 IRQ_TYPE_LEVEL_HIGH>, - <56 IRQ_TYPE_LEVEL_HIGH>, - <60 IRQ_TYPE_LEVEL_HIGH>, - <64 IRQ_TYPE_LEVEL_HIGH>, - <68 IRQ_TYPE_LEVEL_HIGH>, - <72 IRQ_TYPE_LEVEL_HIGH>, - <128 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "hif0", "hif1", "hif2", - "hif3", "hif4", "hif5", "hif6", "hif7", - "hif8", "link"; - port-id = <1>; - gop-port-id = <2>; - status = "disabled"; - }; - - CP110_LABEL(eth2): eth2 { - interrupts = <41 IRQ_TYPE_LEVEL_HIGH>, - <45 IRQ_TYPE_LEVEL_HIGH>, - <49 IRQ_TYPE_LEVEL_HIGH>, - <53 IRQ_TYPE_LEVEL_HIGH>, - <57 IRQ_TYPE_LEVEL_HIGH>, - <61 IRQ_TYPE_LEVEL_HIGH>, - <65 IRQ_TYPE_LEVEL_HIGH>, - <69 IRQ_TYPE_LEVEL_HIGH>, - <73 IRQ_TYPE_LEVEL_HIGH>, - <127 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "hif0", "hif1", "hif2", - "hif3", "hif4", "hif5", "hif6", "hif7", - "hif8", "link"; - port-id = <2>; - gop-port-id = <3>; - status = "disabled"; - }; - }; - - CP110_LABEL(comphy): phy@120000 { - compatible = "marvell,comphy-cp110"; - reg = <0x120000 0x6000>; - marvell,system-controller = <&CP110_LABEL(syscon0)>; - #address-cells = <1>; - #size-cells = <0>; - - CP110_LABEL(comphy0): phy@0 { - reg = <0>; - #phy-cells = <1>; - }; - - CP110_LABEL(comphy1): phy@1 { - reg = <1>; - #phy-cells = <1>; - }; - - CP110_LABEL(comphy2): phy@2 { - reg = <2>; - #phy-cells = <1>; - }; - - CP110_LABEL(comphy3): phy@3 { - reg = <3>; - #phy-cells = <1>; - }; - - CP110_LABEL(comphy4): phy@4 { - reg = <4>; - #phy-cells = <1>; - }; - - CP110_LABEL(comphy5): phy@5 { - reg = <5>; - #phy-cells = <1>; - }; - }; - - CP110_LABEL(mdio): mdio@12a200 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "marvell,orion-mdio"; - reg = <0x12a200 0x10>; - clocks = <&CP110_LABEL(clk) 1 9>, <&CP110_LABEL(clk) 1 5>, - <&CP110_LABEL(clk) 1 6>, <&CP110_LABEL(clk) 1 18>; - status = "disabled"; - }; - - CP110_LABEL(xmdio): mdio@12a600 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "marvell,xmdio"; - reg = <0x12a600 0x10>; - clocks = <&CP110_LABEL(clk) 1 5>, - <&CP110_LABEL(clk) 1 6>, <&CP110_LABEL(clk) 1 18>; - status = "disabled"; - }; - - CP110_LABEL(icu): interrupt-controller@1e0000 { - compatible = "marvell,cp110-icu"; - reg = <0x1e0000 0x440>; - #address-cells = <1>; - #size-cells = <1>; - - CP110_LABEL(icu_nsr): interrupt-controller@10 { - compatible = "marvell,cp110-icu-nsr"; - reg = <0x10 0x20>; - #interrupt-cells = <2>; - interrupt-controller; - msi-parent = <&gicp>; - }; - - CP110_LABEL(icu_sei): interrupt-controller@50 { - compatible = "marvell,cp110-icu-sei"; - reg = <0x50 0x10>; - #interrupt-cells = <2>; - interrupt-controller; - msi-parent = <&sei>; - }; - }; - - CP110_LABEL(rtc): rtc@284000 { - compatible = "marvell,armada-8k-rtc"; - reg = <0x284000 0x20>, <0x284080 0x24>; - reg-names = "rtc", "rtc-soc"; - interrupts = <77 IRQ_TYPE_LEVEL_HIGH>; - }; - - CP110_LABEL(syscon0): system-controller@440000 { - compatible = "syscon", "simple-mfd"; - reg = <0x440000 0x2000>; - - CP110_LABEL(clk): clock { - compatible = "marvell,cp110-clock"; - #clock-cells = <2>; - }; - - CP110_LABEL(gpio1): gpio@100 { - compatible = "marvell,armada-8k-gpio"; - offset = <0x100>; - ngpios = <32>; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&CP110_LABEL(pinctrl) 0 0 32>; - interrupt-controller; - interrupts = <86 IRQ_TYPE_LEVEL_HIGH>, - <85 IRQ_TYPE_LEVEL_HIGH>, - <84 IRQ_TYPE_LEVEL_HIGH>, - <83 IRQ_TYPE_LEVEL_HIGH>; - #interrupt-cells = <2>; - status = "disabled"; - }; - - CP110_LABEL(gpio2): gpio@140 { - compatible = "marvell,armada-8k-gpio"; - offset = <0x140>; - ngpios = <31>; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&CP110_LABEL(pinctrl) 0 32 31>; - interrupt-controller; - interrupts = <82 IRQ_TYPE_LEVEL_HIGH>, - <81 IRQ_TYPE_LEVEL_HIGH>, - <80 IRQ_TYPE_LEVEL_HIGH>, - <79 IRQ_TYPE_LEVEL_HIGH>; - #interrupt-cells = <2>; - status = "disabled"; - }; - }; - - CP110_LABEL(syscon1): system-controller@400000 { - compatible = "syscon", "simple-mfd"; - reg = <0x400000 0x1000>; - #address-cells = <1>; - #size-cells = <1>; - - CP110_LABEL(thermal): thermal-sensor@70 { - compatible = "marvell,armada-cp110-thermal"; - reg = <0x70 0x10>; - interrupts-extended = - <&CP110_LABEL(icu_sei) 116 IRQ_TYPE_LEVEL_HIGH>; - #thermal-sensor-cells = <1>; - }; - }; - - CP110_LABEL(usb3_0): usb3@500000 { - compatible = "marvell,armada-8k-xhci", - "generic-xhci"; - reg = <0x500000 0x4000>; - dma-coherent; - interrupts = <106 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "core", "reg"; - clocks = <&CP110_LABEL(clk) 1 22>, - <&CP110_LABEL(clk) 1 16>; - status = "disabled"; - }; - - CP110_LABEL(usb3_1): usb3@510000 { - compatible = "marvell,armada-8k-xhci", - "generic-xhci"; - reg = <0x510000 0x4000>; - dma-coherent; - interrupts = <105 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "core", "reg"; - clocks = <&CP110_LABEL(clk) 1 23>, - <&CP110_LABEL(clk) 1 16>; - status = "disabled"; - }; - - CP110_LABEL(sata0): sata@540000 { - compatible = "marvell,armada-8k-ahci", - "generic-ahci"; - reg = <0x540000 0x30000>; - dma-coherent; - interrupts = <107 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&CP110_LABEL(clk) 1 15>, - <&CP110_LABEL(clk) 1 16>; - status = "disabled"; - }; - - CP110_LABEL(xor0): xor@6a0000 { - compatible = "marvell,armada-7k-xor", "marvell,xor-v2"; - reg = <0x6a0000 0x1000>, <0x6b0000 0x1000>; - dma-coherent; - msi-parent = <&gic_v2m0>; - clock-names = "core", "reg"; - clocks = <&CP110_LABEL(clk) 1 8>, - <&CP110_LABEL(clk) 1 14>; - }; - - CP110_LABEL(xor1): xor@6c0000 { - compatible = "marvell,armada-7k-xor", "marvell,xor-v2"; - reg = <0x6c0000 0x1000>, <0x6d0000 0x1000>; - dma-coherent; - msi-parent = <&gic_v2m0>; - clock-names = "core", "reg"; - clocks = <&CP110_LABEL(clk) 1 7>, - <&CP110_LABEL(clk) 1 14>; - }; - - CP110_LABEL(spi0): spi@700600 { - compatible = "marvell,armada-380-spi"; - reg = <0x700600 0x50>; - #address-cells = <0x1>; - #size-cells = <0x0>; - clock-names = "core", "axi"; - clocks = <&CP110_LABEL(clk) 1 21>, - <&CP110_LABEL(clk) 1 17>; - status = "disabled"; - }; - - CP110_LABEL(spi1): spi@700680 { - compatible = "marvell,armada-380-spi"; - reg = <0x700680 0x50>; - #address-cells = <1>; - #size-cells = <0>; - clock-names = "core", "axi"; - clocks = <&CP110_LABEL(clk) 1 21>, - <&CP110_LABEL(clk) 1 17>; - status = "disabled"; - }; - - CP110_LABEL(i2c0): i2c@701000 { - compatible = "marvell,mv78230-i2c"; - reg = <0x701000 0x20>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <120 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "core", "reg"; - clocks = <&CP110_LABEL(clk) 1 21>, - <&CP110_LABEL(clk) 1 17>; - status = "disabled"; - }; - - CP110_LABEL(i2c1): i2c@701100 { - compatible = "marvell,mv78230-i2c"; - reg = <0x701100 0x20>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <121 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "core", "reg"; - clocks = <&CP110_LABEL(clk) 1 21>, - <&CP110_LABEL(clk) 1 17>; - status = "disabled"; - }; - - CP110_LABEL(uart0): serial@702000 { - compatible = "snps,dw-apb-uart"; - reg = <0x702000 0x100>; - reg-shift = <2>; - interrupts = <122 IRQ_TYPE_LEVEL_HIGH>; - reg-io-width = <1>; - clock-names = "baudclk", "apb_pclk"; - clocks = <&CP110_LABEL(clk) 1 21>, - <&CP110_LABEL(clk) 1 17>; - status = "disabled"; - }; - - CP110_LABEL(uart1): serial@702100 { - compatible = "snps,dw-apb-uart"; - reg = <0x702100 0x100>; - reg-shift = <2>; - interrupts = <123 IRQ_TYPE_LEVEL_HIGH>; - reg-io-width = <1>; - clock-names = "baudclk", "apb_pclk"; - clocks = <&CP110_LABEL(clk) 1 21>, - <&CP110_LABEL(clk) 1 17>; - status = "disabled"; - }; - - CP110_LABEL(uart2): serial@702200 { - compatible = "snps,dw-apb-uart"; - reg = <0x702200 0x100>; - reg-shift = <2>; - interrupts = <124 IRQ_TYPE_LEVEL_HIGH>; - reg-io-width = <1>; - clock-names = "baudclk", "apb_pclk"; - clocks = <&CP110_LABEL(clk) 1 21>, - <&CP110_LABEL(clk) 1 17>; - status = "disabled"; - }; - - CP110_LABEL(uart3): serial@702300 { - compatible = "snps,dw-apb-uart"; - reg = <0x702300 0x100>; - reg-shift = <2>; - interrupts = <125 IRQ_TYPE_LEVEL_HIGH>; - reg-io-width = <1>; - clock-names = "baudclk", "apb_pclk"; - clocks = <&CP110_LABEL(clk) 1 21>, - <&CP110_LABEL(clk) 1 17>; - status = "disabled"; - }; - - CP110_LABEL(nand_controller): nand@720000 { - /* - * Due to the limitation of the pins available - * this controller is only usable on the CPM - * for A7K and on the CPS for A8K. - */ - compatible = "marvell,armada-8k-nand-controller", - "marvell,armada370-nand-controller"; - reg = <0x720000 0x54>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <115 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "core", "reg"; - clocks = <&CP110_LABEL(clk) 1 2>, - <&CP110_LABEL(clk) 1 17>; - marvell,system-controller = <&CP110_LABEL(syscon0)>; - status = "disabled"; - }; - - CP110_LABEL(trng): trng@760000 { - compatible = "marvell,armada-8k-rng", - "inside-secure,safexcel-eip76"; - reg = <0x760000 0x7d>; - interrupts = <95 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "core", "reg"; - clocks = <&CP110_LABEL(clk) 1 25>, - <&CP110_LABEL(clk) 1 17>; - status = "okay"; - }; - - CP110_LABEL(sdhci0): sdhci@780000 { - compatible = "marvell,armada-cp110-sdhci"; - reg = <0x780000 0x300>; - interrupts = <27 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "core", "axi"; - clocks = <&CP110_LABEL(clk) 1 4>, <&CP110_LABEL(clk) 1 18>; - dma-coherent; - status = "disabled"; - }; - - CP110_LABEL(crypto): crypto@800000 { - compatible = "inside-secure,safexcel-eip197b"; - reg = <0x800000 0x200000>; - interrupts = <87 IRQ_TYPE_LEVEL_HIGH>, - <88 IRQ_TYPE_LEVEL_HIGH>, - <89 IRQ_TYPE_LEVEL_HIGH>, - <90 IRQ_TYPE_LEVEL_HIGH>, - <91 IRQ_TYPE_LEVEL_HIGH>, - <92 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "mem", "ring0", "ring1", - "ring2", "ring3", "eip"; - clock-names = "core", "reg"; - clocks = <&CP110_LABEL(clk) 1 26>, - <&CP110_LABEL(clk) 1 17>; - dma-coherent; - }; - }; - - CP110_LABEL(pcie0): pcie@CP110_PCIE0_BASE { - compatible = "marvell,armada8k-pcie", "snps,dw-pcie"; - reg = <0 ADDRESSIFY(CP110_PCIE0_BASE) 0 0x10000>, - <0 CP110_PCIEx_CONF_BASE(0) 0 0x80000>; - reg-names = "ctrl", "config"; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - device_type = "pci"; - dma-coherent; - msi-parent = <&gic_v2m0>; - - bus-range = <0 0xff>; - ranges = - /* downstream I/O */ - <0x81000000 0 CP110_PCIEx_IO_BASE(0) 0 CP110_PCIEx_IO_BASE(0) 0 0x10000 - /* non-prefetchable memory */ - 0x82000000 0 CP110_PCIEx_MEM_BASE(0) 0 CP110_PCIEx_MEM_BASE(0) 0 0xf00000>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &CP110_LABEL(icu_nsr) 22 IRQ_TYPE_LEVEL_HIGH>; - interrupts = <22 IRQ_TYPE_LEVEL_HIGH>; - num-lanes = <1>; - clock-names = "core", "reg"; - clocks = <&CP110_LABEL(clk) 1 13>, <&CP110_LABEL(clk) 1 14>; - status = "disabled"; - }; - - CP110_LABEL(pcie1): pcie@CP110_PCIE1_BASE { - compatible = "marvell,armada8k-pcie", "snps,dw-pcie"; - reg = <0 ADDRESSIFY(CP110_PCIE1_BASE) 0 0x10000>, - <0 CP110_PCIEx_CONF_BASE(1) 0 0x80000>; - reg-names = "ctrl", "config"; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - device_type = "pci"; - dma-coherent; - msi-parent = <&gic_v2m0>; - - bus-range = <0 0xff>; - ranges = - /* downstream I/O */ - <0x81000000 0 CP110_PCIEx_IO_BASE(1) 0 CP110_PCIEx_IO_BASE(1) 0 0x10000 - /* non-prefetchable memory */ - 0x82000000 0 CP110_PCIEx_MEM_BASE(1) 0 CP110_PCIEx_MEM_BASE(1) 0 0xf00000>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &CP110_LABEL(icu_nsr) 24 IRQ_TYPE_LEVEL_HIGH>; - interrupts = <24 IRQ_TYPE_LEVEL_HIGH>; - - num-lanes = <1>; - clock-names = "core", "reg"; - clocks = <&CP110_LABEL(clk) 1 11>, <&CP110_LABEL(clk) 1 14>; - status = "disabled"; - }; - - CP110_LABEL(pcie2): pcie@CP110_PCIE2_BASE { - compatible = "marvell,armada8k-pcie", "snps,dw-pcie"; - reg = <0 ADDRESSIFY(CP110_PCIE2_BASE) 0 0x10000>, - <0 CP110_PCIEx_CONF_BASE(2) 0 0x80000>; - reg-names = "ctrl", "config"; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - device_type = "pci"; - dma-coherent; - msi-parent = <&gic_v2m0>; - - bus-range = <0 0xff>; - ranges = - /* downstream I/O */ - <0x81000000 0 CP110_PCIEx_IO_BASE(2) 0 CP110_PCIEx_IO_BASE(2) 0 0x10000 - /* non-prefetchable memory */ - 0x82000000 0 CP110_PCIEx_MEM_BASE(2) 0 CP110_PCIEx_MEM_BASE(2) 0 0xf00000>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &CP110_LABEL(icu_nsr) 23 IRQ_TYPE_LEVEL_HIGH>; - interrupts = <23 IRQ_TYPE_LEVEL_HIGH>; - - num-lanes = <1>; - clock-names = "core", "reg"; - clocks = <&CP110_LABEL(clk) 1 12>, <&CP110_LABEL(clk) 1 14>; - status = "disabled"; - }; -}; +#undef CP11X_TYPE diff --git a/arch/arm64/boot/dts/marvell/armada-cp115.dtsi b/arch/arm64/boot/dts/marvell/armada-cp115.dtsi new file mode 100644 index 000000000000..1d0a9653e681 --- /dev/null +++ b/arch/arm64/boot/dts/marvell/armada-cp115.dtsi @@ -0,0 +1,12 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2019 Marvell Technology Group Ltd. + * + * Device Tree file for Marvell Armada CP115. + */ + +#define CP11X_TYPE cp115 + +#include "armada-cp11x.dtsi" + +#undef CP11X_TYPE diff --git a/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi b/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi new file mode 100644 index 000000000000..9dcf16beabf5 --- /dev/null +++ b/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi @@ -0,0 +1,568 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2016 Marvell Technology Group Ltd. + * + * Device Tree file for Marvell Armada CP11x. + */ + +#include <dt-bindings/interrupt-controller/mvebu-icu.h> +#include <dt-bindings/thermal/thermal.h> + +#include "armada-common.dtsi" + +#define CP11X_PCIEx_CONF_BASE(iface) (CP11X_PCIEx_MEM_BASE(iface) + CP11X_PCIEx_MEM_SIZE(iface)) + +/ { + /* + * The contents of the node are defined below, in order to + * save one indentation level + */ + CP11X_NAME: CP11X_NAME { }; + + /* + * CPs only have one sensor in the thermal IC. + * + * The cooling maps are empty as there are no cooling devices. + */ + thermal-zones { + CP11X_LABEL(thermal_ic): CP11X_NODE_NAME(thermal-ic) { + polling-delay-passive = <0>; /* Interrupt driven */ + polling-delay = <0>; /* Interrupt driven */ + + thermal-sensors = <&CP11X_LABEL(thermal) 0>; + + trips { + CP11X_LABEL(crit): crit { + temperature = <100000>; /* mC degrees */ + hysteresis = <2000>; /* mC degrees */ + type = "critical"; + }; + }; + + cooling-maps { }; + }; + }; +}; + +&CP11X_NAME { + #address-cells = <2>; + #size-cells = <2>; + compatible = "simple-bus"; + interrupt-parent = <&CP11X_LABEL(icu_nsr)>; + ranges; + + config-space@CP11X_BASE { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges = <0x0 0x0 ADDRESSIFY(CP11X_BASE) 0x2000000>; + + CP11X_LABEL(ethernet): ethernet@0 { + compatible = "marvell,armada-7k-pp22"; + reg = <0x0 0x100000>, <0x129000 0xb000>; + clocks = <&CP11X_LABEL(clk) 1 3>, <&CP11X_LABEL(clk) 1 9>, + <&CP11X_LABEL(clk) 1 5>, <&CP11X_LABEL(clk) 1 6>, + <&CP11X_LABEL(clk) 1 18>; + clock-names = "pp_clk", "gop_clk", + "mg_clk", "mg_core_clk", "axi_clk"; + marvell,system-controller = <&CP11X_LABEL(syscon0)>; + status = "disabled"; + dma-coherent; + + CP11X_LABEL(eth0): eth0 { + interrupts = <39 IRQ_TYPE_LEVEL_HIGH>, + <43 IRQ_TYPE_LEVEL_HIGH>, + <47 IRQ_TYPE_LEVEL_HIGH>, + <51 IRQ_TYPE_LEVEL_HIGH>, + <55 IRQ_TYPE_LEVEL_HIGH>, + <59 IRQ_TYPE_LEVEL_HIGH>, + <63 IRQ_TYPE_LEVEL_HIGH>, + <67 IRQ_TYPE_LEVEL_HIGH>, + <71 IRQ_TYPE_LEVEL_HIGH>, + <129 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hif0", "hif1", "hif2", + "hif3", "hif4", "hif5", "hif6", "hif7", + "hif8", "link"; + port-id = <0>; + gop-port-id = <0>; + status = "disabled"; + }; + + CP11X_LABEL(eth1): eth1 { + interrupts = <40 IRQ_TYPE_LEVEL_HIGH>, + <44 IRQ_TYPE_LEVEL_HIGH>, + <48 IRQ_TYPE_LEVEL_HIGH>, + <52 IRQ_TYPE_LEVEL_HIGH>, + <56 IRQ_TYPE_LEVEL_HIGH>, + <60 IRQ_TYPE_LEVEL_HIGH>, + <64 IRQ_TYPE_LEVEL_HIGH>, + <68 IRQ_TYPE_LEVEL_HIGH>, + <72 IRQ_TYPE_LEVEL_HIGH>, + <128 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hif0", "hif1", "hif2", + "hif3", "hif4", "hif5", "hif6", "hif7", + "hif8", "link"; + port-id = <1>; + gop-port-id = <2>; + status = "disabled"; + }; + + CP11X_LABEL(eth2): eth2 { + interrupts = <41 IRQ_TYPE_LEVEL_HIGH>, + <45 IRQ_TYPE_LEVEL_HIGH>, + <49 IRQ_TYPE_LEVEL_HIGH>, + <53 IRQ_TYPE_LEVEL_HIGH>, + <57 IRQ_TYPE_LEVEL_HIGH>, + <61 IRQ_TYPE_LEVEL_HIGH>, + <65 IRQ_TYPE_LEVEL_HIGH>, + <69 IRQ_TYPE_LEVEL_HIGH>, + <73 IRQ_TYPE_LEVEL_HIGH>, + <127 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hif0", "hif1", "hif2", + "hif3", "hif4", "hif5", "hif6", "hif7", + "hif8", "link"; + port-id = <2>; + gop-port-id = <3>; + status = "disabled"; + }; + }; + + CP11X_LABEL(comphy): phy@120000 { + compatible = "marvell,comphy-cp110"; + reg = <0x120000 0x6000>; + marvell,system-controller = <&CP11X_LABEL(syscon0)>; + clocks = <&CP11X_LABEL(clk) 1 5>, <&CP11X_LABEL(clk) 1 6>, + <&CP11X_LABEL(clk) 1 18>; + clock-names = "mg_clk", "mg_core_clk", "axi_clk"; + #address-cells = <1>; + #size-cells = <0>; + + CP11X_LABEL(comphy0): phy@0 { + reg = <0>; + #phy-cells = <1>; + }; + + CP11X_LABEL(comphy1): phy@1 { + reg = <1>; + #phy-cells = <1>; + }; + + CP11X_LABEL(comphy2): phy@2 { + reg = <2>; + #phy-cells = <1>; + }; + + CP11X_LABEL(comphy3): phy@3 { + reg = <3>; + #phy-cells = <1>; + }; + + CP11X_LABEL(comphy4): phy@4 { + reg = <4>; + #phy-cells = <1>; + }; + + CP11X_LABEL(comphy5): phy@5 { + reg = <5>; + #phy-cells = <1>; + }; + }; + + CP11X_LABEL(mdio): mdio@12a200 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "marvell,orion-mdio"; + reg = <0x12a200 0x10>; + clocks = <&CP11X_LABEL(clk) 1 9>, <&CP11X_LABEL(clk) 1 5>, + <&CP11X_LABEL(clk) 1 6>, <&CP11X_LABEL(clk) 1 18>; + status = "disabled"; + }; + + CP11X_LABEL(xmdio): mdio@12a600 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "marvell,xmdio"; + reg = <0x12a600 0x10>; + clocks = <&CP11X_LABEL(clk) 1 5>, + <&CP11X_LABEL(clk) 1 6>, <&CP11X_LABEL(clk) 1 18>; + status = "disabled"; + }; + + CP11X_LABEL(icu): interrupt-controller@1e0000 { + compatible = "marvell,cp110-icu"; + reg = <0x1e0000 0x440>; + #address-cells = <1>; + #size-cells = <1>; + + CP11X_LABEL(icu_nsr): interrupt-controller@10 { + compatible = "marvell,cp110-icu-nsr"; + reg = <0x10 0x20>; + #interrupt-cells = <2>; + interrupt-controller; + msi-parent = <&gicp>; + }; + + CP11X_LABEL(icu_sei): interrupt-controller@50 { + compatible = "marvell,cp110-icu-sei"; + reg = <0x50 0x10>; + #interrupt-cells = <2>; + interrupt-controller; + msi-parent = <&sei>; + }; + }; + + CP11X_LABEL(rtc): rtc@284000 { + compatible = "marvell,armada-8k-rtc"; + reg = <0x284000 0x20>, <0x284080 0x24>; + reg-names = "rtc", "rtc-soc"; + interrupts = <77 IRQ_TYPE_LEVEL_HIGH>; + }; + + CP11X_LABEL(syscon0): system-controller@440000 { + compatible = "syscon", "simple-mfd"; + reg = <0x440000 0x2000>; + + CP11X_LABEL(clk): clock { + compatible = "marvell,cp110-clock"; + #clock-cells = <2>; + }; + + CP11X_LABEL(gpio1): gpio@100 { + compatible = "marvell,armada-8k-gpio"; + offset = <0x100>; + ngpios = <32>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&CP11X_LABEL(pinctrl) 0 0 32>; + interrupt-controller; + interrupts = <86 IRQ_TYPE_LEVEL_HIGH>, + <85 IRQ_TYPE_LEVEL_HIGH>, + <84 IRQ_TYPE_LEVEL_HIGH>, + <83 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <2>; + status = "disabled"; + }; + + CP11X_LABEL(gpio2): gpio@140 { + compatible = "marvell,armada-8k-gpio"; + offset = <0x140>; + ngpios = <31>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&CP11X_LABEL(pinctrl) 0 32 31>; + interrupt-controller; + interrupts = <82 IRQ_TYPE_LEVEL_HIGH>, + <81 IRQ_TYPE_LEVEL_HIGH>, + <80 IRQ_TYPE_LEVEL_HIGH>, + <79 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <2>; + status = "disabled"; + }; + }; + + CP11X_LABEL(syscon1): system-controller@400000 { + compatible = "syscon", "simple-mfd"; + reg = <0x400000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + + CP11X_LABEL(thermal): thermal-sensor@70 { + compatible = "marvell,armada-cp110-thermal"; + reg = <0x70 0x10>; + interrupts-extended = + <&CP11X_LABEL(icu_sei) 116 IRQ_TYPE_LEVEL_HIGH>; + #thermal-sensor-cells = <1>; + }; + }; + + CP11X_LABEL(usb3_0): usb3@500000 { + compatible = "marvell,armada-8k-xhci", + "generic-xhci"; + reg = <0x500000 0x4000>; + dma-coherent; + interrupts = <106 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "core", "reg"; + clocks = <&CP11X_LABEL(clk) 1 22>, + <&CP11X_LABEL(clk) 1 16>; + status = "disabled"; + }; + + CP11X_LABEL(usb3_1): usb3@510000 { + compatible = "marvell,armada-8k-xhci", + "generic-xhci"; + reg = <0x510000 0x4000>; + dma-coherent; + interrupts = <105 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "core", "reg"; + clocks = <&CP11X_LABEL(clk) 1 23>, + <&CP11X_LABEL(clk) 1 16>; + status = "disabled"; + }; + + CP11X_LABEL(sata0): sata@540000 { + compatible = "marvell,armada-8k-ahci", + "generic-ahci"; + reg = <0x540000 0x30000>; + dma-coherent; + interrupts = <107 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&CP11X_LABEL(clk) 1 15>, + <&CP11X_LABEL(clk) 1 16>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + sata-port@0 { + reg = <0>; + }; + + sata-port@1 { + reg = <1>; + }; + }; + + CP11X_LABEL(xor0): xor@6a0000 { + compatible = "marvell,armada-7k-xor", "marvell,xor-v2"; + reg = <0x6a0000 0x1000>, <0x6b0000 0x1000>; + dma-coherent; + msi-parent = <&gic_v2m0>; + clock-names = "core", "reg"; + clocks = <&CP11X_LABEL(clk) 1 8>, + <&CP11X_LABEL(clk) 1 14>; + }; + + CP11X_LABEL(xor1): xor@6c0000 { + compatible = "marvell,armada-7k-xor", "marvell,xor-v2"; + reg = <0x6c0000 0x1000>, <0x6d0000 0x1000>; + dma-coherent; + msi-parent = <&gic_v2m0>; + clock-names = "core", "reg"; + clocks = <&CP11X_LABEL(clk) 1 7>, + <&CP11X_LABEL(clk) 1 14>; + }; + + CP11X_LABEL(spi0): spi@700600 { + compatible = "marvell,armada-380-spi"; + reg = <0x700600 0x50>; + #address-cells = <0x1>; + #size-cells = <0x0>; + clock-names = "core", "axi"; + clocks = <&CP11X_LABEL(clk) 1 21>, + <&CP11X_LABEL(clk) 1 17>; + status = "disabled"; + }; + + CP11X_LABEL(spi1): spi@700680 { + compatible = "marvell,armada-380-spi"; + reg = <0x700680 0x50>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "core", "axi"; + clocks = <&CP11X_LABEL(clk) 1 21>, + <&CP11X_LABEL(clk) 1 17>; + status = "disabled"; + }; + + CP11X_LABEL(i2c0): i2c@701000 { + compatible = "marvell,mv78230-i2c"; + reg = <0x701000 0x20>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <120 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "core", "reg"; + clocks = <&CP11X_LABEL(clk) 1 21>, + <&CP11X_LABEL(clk) 1 17>; + status = "disabled"; + }; + + CP11X_LABEL(i2c1): i2c@701100 { + compatible = "marvell,mv78230-i2c"; + reg = <0x701100 0x20>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <121 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "core", "reg"; + clocks = <&CP11X_LABEL(clk) 1 21>, + <&CP11X_LABEL(clk) 1 17>; + status = "disabled"; + }; + + CP11X_LABEL(uart0): serial@702000 { + compatible = "snps,dw-apb-uart"; + reg = <0x702000 0x100>; + reg-shift = <2>; + interrupts = <122 IRQ_TYPE_LEVEL_HIGH>; + reg-io-width = <1>; + clock-names = "baudclk", "apb_pclk"; + clocks = <&CP11X_LABEL(clk) 1 21>, + <&CP11X_LABEL(clk) 1 17>; + status = "disabled"; + }; + + CP11X_LABEL(uart1): serial@702100 { + compatible = "snps,dw-apb-uart"; + reg = <0x702100 0x100>; + reg-shift = <2>; + interrupts = <123 IRQ_TYPE_LEVEL_HIGH>; + reg-io-width = <1>; + clock-names = "baudclk", "apb_pclk"; + clocks = <&CP11X_LABEL(clk) 1 21>, + <&CP11X_LABEL(clk) 1 17>; + status = "disabled"; + }; + + CP11X_LABEL(uart2): serial@702200 { + compatible = "snps,dw-apb-uart"; + reg = <0x702200 0x100>; + reg-shift = <2>; + interrupts = <124 IRQ_TYPE_LEVEL_HIGH>; + reg-io-width = <1>; + clock-names = "baudclk", "apb_pclk"; + clocks = <&CP11X_LABEL(clk) 1 21>, + <&CP11X_LABEL(clk) 1 17>; + status = "disabled"; + }; + + CP11X_LABEL(uart3): serial@702300 { + compatible = "snps,dw-apb-uart"; + reg = <0x702300 0x100>; + reg-shift = <2>; + interrupts = <125 IRQ_TYPE_LEVEL_HIGH>; + reg-io-width = <1>; + clock-names = "baudclk", "apb_pclk"; + clocks = <&CP11X_LABEL(clk) 1 21>, + <&CP11X_LABEL(clk) 1 17>; + status = "disabled"; + }; + + CP11X_LABEL(nand_controller): nand@720000 { + /* + * Due to the limitation of the pins available + * this controller is only usable on the CPM + * for A7K and on the CPS for A8K. + */ + compatible = "marvell,armada-8k-nand-controller", + "marvell,armada370-nand-controller"; + reg = <0x720000 0x54>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <115 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "core", "reg"; + clocks = <&CP11X_LABEL(clk) 1 2>, + <&CP11X_LABEL(clk) 1 17>; + marvell,system-controller = <&CP11X_LABEL(syscon0)>; + status = "disabled"; + }; + + CP11X_LABEL(trng): trng@760000 { + compatible = "marvell,armada-8k-rng", + "inside-secure,safexcel-eip76"; + reg = <0x760000 0x7d>; + interrupts = <95 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "core", "reg"; + clocks = <&CP11X_LABEL(clk) 1 25>, + <&CP11X_LABEL(clk) 1 17>; + status = "okay"; + }; + + CP11X_LABEL(sdhci0): sdhci@780000 { + compatible = "marvell,armada-cp110-sdhci"; + reg = <0x780000 0x300>; + interrupts = <27 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "core", "axi"; + clocks = <&CP11X_LABEL(clk) 1 4>, <&CP11X_LABEL(clk) 1 18>; + dma-coherent; + status = "disabled"; + }; + + CP11X_LABEL(crypto): crypto@800000 { + compatible = "inside-secure,safexcel-eip197b"; + reg = <0x800000 0x200000>; + interrupts = <87 IRQ_TYPE_LEVEL_HIGH>, + <88 IRQ_TYPE_LEVEL_HIGH>, + <89 IRQ_TYPE_LEVEL_HIGH>, + <90 IRQ_TYPE_LEVEL_HIGH>, + <91 IRQ_TYPE_LEVEL_HIGH>, + <92 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "mem", "ring0", "ring1", + "ring2", "ring3", "eip"; + clock-names = "core", "reg"; + clocks = <&CP11X_LABEL(clk) 1 26>, + <&CP11X_LABEL(clk) 1 17>; + dma-coherent; + }; + }; + + CP11X_LABEL(pcie0): pcie@CP11X_PCIE0_BASE { + compatible = "marvell,armada8k-pcie", "snps,dw-pcie"; + reg = <0 ADDRESSIFY(CP11X_PCIE0_BASE) 0 0x10000>, + <0 CP11X_PCIEx_CONF_BASE(0) 0 0x80000>; + reg-names = "ctrl", "config"; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + device_type = "pci"; + dma-coherent; + msi-parent = <&gic_v2m0>; + + bus-range = <0 0xff>; + /* non-prefetchable memory */ + ranges = <0x82000000 0 CP11X_PCIEx_MEM_BASE(0) 0 CP11X_PCIEx_MEM_BASE(0) 0 CP11X_PCIEx_MEM_SIZE(0)>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &CP11X_LABEL(icu_nsr) 22 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <22 IRQ_TYPE_LEVEL_HIGH>; + num-lanes = <1>; + clock-names = "core", "reg"; + clocks = <&CP11X_LABEL(clk) 1 13>, <&CP11X_LABEL(clk) 1 14>; + status = "disabled"; + }; + + CP11X_LABEL(pcie1): pcie@CP11X_PCIE1_BASE { + compatible = "marvell,armada8k-pcie", "snps,dw-pcie"; + reg = <0 ADDRESSIFY(CP11X_PCIE1_BASE) 0 0x10000>, + <0 CP11X_PCIEx_CONF_BASE(1) 0 0x80000>; + reg-names = "ctrl", "config"; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + device_type = "pci"; + dma-coherent; + msi-parent = <&gic_v2m0>; + + bus-range = <0 0xff>; + /* non-prefetchable memory */ + ranges = <0x82000000 0 CP11X_PCIEx_MEM_BASE(1) 0 CP11X_PCIEx_MEM_BASE(1) 0 CP11X_PCIEx_MEM_SIZE(1)>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &CP11X_LABEL(icu_nsr) 24 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <24 IRQ_TYPE_LEVEL_HIGH>; + + num-lanes = <1>; + clock-names = "core", "reg"; + clocks = <&CP11X_LABEL(clk) 1 11>, <&CP11X_LABEL(clk) 1 14>; + status = "disabled"; + }; + + CP11X_LABEL(pcie2): pcie@CP11X_PCIE2_BASE { + compatible = "marvell,armada8k-pcie", "snps,dw-pcie"; + reg = <0 ADDRESSIFY(CP11X_PCIE2_BASE) 0 0x10000>, + <0 CP11X_PCIEx_CONF_BASE(2) 0 0x80000>; + reg-names = "ctrl", "config"; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + device_type = "pci"; + dma-coherent; + msi-parent = <&gic_v2m0>; + + bus-range = <0 0xff>; + /* non-prefetchable memory */ + ranges = <0x82000000 0 CP11X_PCIEx_MEM_BASE(2) 0 CP11X_PCIEx_MEM_BASE(2) 0 CP11X_PCIEx_MEM_SIZE(2)>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &CP11X_LABEL(icu_nsr) 23 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <23 IRQ_TYPE_LEVEL_HIGH>; + + num-lanes = <1>; + clock-names = "core", "reg"; + clocks = <&CP11X_LABEL(clk) 1 12>, <&CP11X_LABEL(clk) 1 14>; + status = "disabled"; + }; +}; diff --git a/arch/arm64/boot/dts/marvell/cn9130-db.dts b/arch/arm64/boot/dts/marvell/cn9130-db.dts new file mode 100644 index 000000000000..ce49a70d88a0 --- /dev/null +++ b/arch/arm64/boot/dts/marvell/cn9130-db.dts @@ -0,0 +1,403 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2019 Marvell International Ltd. + * + * Device tree for the CN9130-DB board. + */ + +#include "cn9130.dtsi" + +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Marvell Armada CN9130-DB"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + aliases { + gpio1 = &cp0_gpio1; + gpio2 = &cp0_gpio2; + i2c0 = &cp0_i2c0; + ethernet0 = &cp0_eth0; + ethernet1 = &cp0_eth1; + ethernet2 = &cp0_eth2; + spi1 = &cp0_spi0; + spi2 = &cp0_spi1; + }; + + memory@00000000 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; + }; + + ap0_reg_sd_vccq: ap0_sd_vccq@0 { + compatible = "regulator-gpio"; + regulator-name = "ap0_sd_vccq"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + gpios = <&expander0 8 GPIO_ACTIVE_HIGH>; + states = <1800000 0x1 3300000 0x0>; + }; + + cp0_reg_usb3_vbus0: cp0_usb3_vbus@0 { + compatible = "regulator-fixed"; + regulator-name = "cp0-xhci0-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&expander0 0 GPIO_ACTIVE_HIGH>; + }; + + cp0_usb3_0_phy0: cp0_usb3_phy@0 { + compatible = "usb-nop-xceiv"; + vcc-supply = <&cp0_reg_usb3_vbus0>; + }; + + cp0_reg_usb3_vbus1: cp0_usb3_vbus@1 { + compatible = "regulator-fixed"; + regulator-name = "cp0-xhci1-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&expander0 1 GPIO_ACTIVE_HIGH>; + }; + + cp0_usb3_0_phy1: cp0_usb3_phy@1 { + compatible = "usb-nop-xceiv"; + vcc-supply = <&cp0_reg_usb3_vbus1>; + }; + + cp0_reg_sd_vccq: cp0_sd_vccq@0 { + compatible = "regulator-gpio"; + regulator-name = "cp0_sd_vccq"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + gpios = <&expander0 15 GPIO_ACTIVE_HIGH>; + states = <1800000 0x1 + 3300000 0x0>; + }; + + cp0_reg_sd_vcc: cp0_sd_vcc@0 { + compatible = "regulator-fixed"; + regulator-name = "cp0_sd_vcc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&expander0 14 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + + cp0_sfp_eth0: sfp-eth@0 { + compatible = "sff,sfp"; + i2c-bus = <&cp0_sfpp0_i2c>; + los-gpio = <&cp0_module_expander1 11 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&cp0_module_expander1 10 GPIO_ACTIVE_LOW>; + tx-disable-gpio = <&cp0_module_expander1 9 GPIO_ACTIVE_HIGH>; + tx-fault-gpio = <&cp0_module_expander1 8 GPIO_ACTIVE_HIGH>; + /* + * SFP cages are unconnected on early PCBs because of an the I2C + * lanes not being connected. Prevent the port for being + * unusable by disabling the SFP node. + */ + status = "disabled"; + }; +}; + +&uart0 { + status = "okay"; +}; + +/* on-board eMMC - U9 */ +&ap_sdhci0 { + pinctrl-names = "default"; + bus-width = <8>; + vqmmc-supply = <&ap0_reg_sd_vccq>; + status = "okay"; +}; + +&cp0_crypto { + status = "disabled"; +}; + +&cp0_ethernet { + status = "okay"; +}; + +/* SLM-1521-V2, CON9 */ +&cp0_eth0 { + status = "disabled"; + phy-mode = "10gbase-kr"; + /* Generic PHY, providing serdes lanes */ + phys = <&cp0_comphy4 0>; + managed = "in-band-status"; + sfp = <&cp0_sfp_eth0>; +}; + +/* CON56 */ +&cp0_eth1 { + status = "okay"; + phy = <&phy0>; + phy-mode = "rgmii-id"; +}; + +/* CON57 */ +&cp0_eth2 { + status = "okay"; + phy = <&phy1>; + phy-mode = "rgmii-id"; +}; + +&cp0_gpio1 { + status = "okay"; +}; + +&cp0_gpio2 { + status = "okay"; +}; + +&cp0_i2c0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&cp0_i2c0_pins>; + clock-frequency = <100000>; + + /* U36 */ + expander0: pca953x@21 { + compatible = "nxp,pca9555"; + pinctrl-names = "default"; + gpio-controller; + #gpio-cells = <2>; + reg = <0x21>; + status = "okay"; + }; + + /* U42 */ + eeprom0: eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + pagesize = <0x20>; + }; + + /* U38 */ + eeprom1: eeprom@57 { + compatible = "atmel,24c64"; + reg = <0x57>; + pagesize = <0x20>; + }; +}; + +&cp0_i2c1 { + status = "okay"; + clock-frequency = <100000>; + + /* SLM-1521-V2 - U3 */ + i2c-mux@72 { /* verify address - depends on dpr */ + compatible = "nxp,pca9544"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x72>; + cp0_sfpp0_i2c: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + /* U12 */ + cp0_module_expander1: pca9555@21 { + compatible = "nxp,pca9555"; + pinctrl-names = "default"; + gpio-controller; + #gpio-cells = <2>; + reg = <0x21>; + }; + + }; + }; +}; + +&cp0_mdio { + status = "okay"; + + phy0: ethernet-phy@0 { + reg = <0>; + }; + + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + +/* U54 */ +&cp0_nand_controller { + pinctrl-names = "default"; + pinctrl-0 = <&nand_pins &nand_rb>; + + nand@0 { + reg = <0>; + label = "main-storage"; + nand-rb = <0>; + nand-ecc-mode = "hw"; + nand-on-flash-bbt; + nand-ecc-strength = <8>; + nand-ecc-step-size = <512>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "U-Boot"; + reg = <0 0x200000>; + }; + partition@200000 { + label = "Linux"; + reg = <0x200000 0xd00000>; + }; + partition@1000000 { + label = "Filesystem"; + reg = <0x1000000 0x3f000000>; + }; + }; + }; +}; + +/* SLM-1521-V2, CON6 */ +&cp0_pcie0 { + status = "okay"; + num-lanes = <4>; + num-viewport = <8>; + /* Generic PHY, providing serdes lanes */ + phys = <&cp0_comphy0 0 + &cp0_comphy1 0 + &cp0_comphy2 0 + &cp0_comphy3 0>; +}; + +&cp0_sata0 { + status = "okay"; + + /* SLM-1521-V2, CON2 */ + sata-port@1 { + status = "okay"; + /* Generic PHY, providing serdes lanes */ + phys = <&cp0_comphy5 1>; + }; +}; + +/* CON 28 */ +&cp0_sdhci0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&cp0_sdhci_pins + &cp0_sdhci_cd_pins>; + bus-width = <4>; + cd-gpios = <&cp0_gpio2 11 GPIO_ACTIVE_LOW>; + no-1-8-v; + vqmmc-supply = <&cp0_reg_sd_vccq>; + vmmc-supply = <&cp0_reg_sd_vcc>; +}; + +/* U55 */ +&cp0_spi1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&cp0_spi0_pins>; + reg = <0x700680 0x50>; + + spi-flash@0 { + #address-cells = <0x1>; + #size-cells = <0x1>; + compatible = "jedec,spi-nor"; + reg = <0x0>; + /* On-board MUX does not allow higher frequencies */ + spi-max-frequency = <40000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "U-Boot-0"; + reg = <0x0 0x200000>; + }; + + partition@400000 { + label = "Filesystem-0"; + reg = <0x200000 0xe00000>; + }; + }; + }; +}; + +&cp0_syscon0 { + cp0_pinctrl: pinctrl { + compatible = "marvell,cp115-standalone-pinctrl"; + + cp0_i2c0_pins: cp0-i2c-pins-0 { + marvell,pins = "mpp37", "mpp38"; + marvell,function = "i2c0"; + }; + cp0_i2c1_pins: cp0-i2c-pins-1 { + marvell,pins = "mpp35", "mpp36"; + marvell,function = "i2c1"; + }; + cp0_ge1_rgmii_pins: cp0-ge-rgmii-pins-0 { + marvell,pins = "mpp0", "mpp1", "mpp2", + "mpp3", "mpp4", "mpp5", + "mpp6", "mpp7", "mpp8", + "mpp9", "mpp10", "mpp11"; + marvell,function = "ge0"; + }; + cp0_ge2_rgmii_pins: cp0-ge-rgmii-pins-1 { + marvell,pins = "mpp44", "mpp45", "mpp46", + "mpp47", "mpp48", "mpp49", + "mpp50", "mpp51", "mpp52", + "mpp53", "mpp54", "mpp55"; + marvell,function = "ge1"; + }; + cp0_sdhci_cd_pins: cp0-sdhci-cd-pins-0 { + marvell,pins = "mpp43"; + marvell,function = "gpio"; + }; + cp0_sdhci_pins: cp0-sdhi-pins-0 { + marvell,pins = "mpp56", "mpp57", "mpp58", + "mpp59", "mpp60", "mpp61"; + marvell,function = "sdio"; + }; + cp0_spi0_pins: cp0-spi-pins-0 { + marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16"; + marvell,function = "spi1"; + }; + nand_pins: nand-pins { + marvell,pins = "mpp15", "mpp16", "mpp17", "mpp18", + "mpp19", "mpp20", "mpp21", "mpp22", + "mpp23", "mpp24", "mpp25", "mpp26", + "mpp27"; + marvell,function = "dev"; + }; + nand_rb: nand-rb { + marvell,pins = "mpp13"; + marvell,function = "nf"; + }; + }; +}; + +&cp0_usb3_0 { + status = "okay"; + usb-phy = <&cp0_usb3_0_phy0>; + phy-names = "usb"; +}; + +&cp0_usb3_1 { + status = "okay"; + usb-phy = <&cp0_usb3_0_phy1>; + phy-names = "usb"; +}; diff --git a/arch/arm64/boot/dts/marvell/cn9130.dtsi b/arch/arm64/boot/dts/marvell/cn9130.dtsi new file mode 100644 index 000000000000..a2b7e5ec979d --- /dev/null +++ b/arch/arm64/boot/dts/marvell/cn9130.dtsi @@ -0,0 +1,37 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2019 Marvell International Ltd. + * + * Device tree for the CN9130 SoC. + */ + +#include "armada-ap807-quad.dtsi" + +/ { + model = "Marvell Armada CN9130 SoC"; + compatible = "marvell,cn9130", "marvell,armada-ap807-quad", + "marvell,armada-ap807"; +}; + +/* + * Instantiate the internal CP115 + */ + +#define CP11X_NAME cp0 +#define CP11X_BASE f2000000 +#define CP11X_PCIEx_MEM_BASE(iface) ((iface == 0) ? 0xc0000000 : \ + 0xe0000000 + ((iface - 1) * 0x1000000)) +#define CP11X_PCIEx_MEM_SIZE(iface) ((iface == 0) ? 0x1ff00000 : 0xf00000) +#define CP11X_PCIE0_BASE f2600000 +#define CP11X_PCIE1_BASE f2620000 +#define CP11X_PCIE2_BASE f2640000 + +#include "armada-cp115.dtsi" + +#undef CP11X_NAME +#undef CP11X_BASE +#undef CP11X_PCIEx_MEM_BASE +#undef CP11X_PCIEx_MEM_SIZE +#undef CP11X_PCIE0_BASE +#undef CP11X_PCIE1_BASE +#undef CP11X_PCIE2_BASE diff --git a/arch/arm64/boot/dts/marvell/cn9131-db.dts b/arch/arm64/boot/dts/marvell/cn9131-db.dts new file mode 100644 index 000000000000..3c975f98b2a3 --- /dev/null +++ b/arch/arm64/boot/dts/marvell/cn9131-db.dts @@ -0,0 +1,202 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2019 Marvell International Ltd. + * + * Device tree for the CN9131-DB board. + */ + +#include "cn9130-db.dts" + +/ { + model = "Marvell Armada CN9131-DB"; + compatible = "marvell,cn9131", "marvell,cn9130", + "marvell,armada-ap807-quad", "marvell,armada-ap807"; + + aliases { + gpio3 = &cp1_gpio1; + gpio4 = &cp1_gpio2; + ethernet3 = &cp1_eth0; + ethernet4 = &cp1_eth1; + }; + + cp1_reg_usb3_vbus0: cp1_usb3_vbus@0 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&cp1_xhci0_vbus_pins>; + regulator-name = "cp1-xhci0-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&cp1_gpio1 3 GPIO_ACTIVE_HIGH>; + }; + + cp1_usb3_0_phy0: cp1_usb3_phy0 { + compatible = "usb-nop-xceiv"; + vcc-supply = <&cp1_reg_usb3_vbus0>; + }; + + cp1_sfp_eth1: sfp-eth1 { + compatible = "sff,sfp"; + i2c-bus = <&cp1_i2c0>; + los-gpio = <&cp1_gpio1 11 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&cp1_gpio1 10 GPIO_ACTIVE_LOW>; + tx-disable-gpio = <&cp1_gpio1 9 GPIO_ACTIVE_HIGH>; + tx-fault-gpio = <&cp1_gpio1 8 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&cp1_sfp_pins>; + /* + * SFP cages are unconnected on early PCBs because of an the I2C + * lanes not being connected. Prevent the port for being + * unusable by disabling the SFP node. + */ + status = "disabled"; + }; +}; + +/* + * Instantiate the first slave CP115 + */ + +#define CP11X_NAME cp1 +#define CP11X_BASE f4000000 +#define CP11X_PCIEx_MEM_BASE(iface) (0xe2000000 + (iface * 0x1000000)) +#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000 +#define CP11X_PCIE0_BASE f4600000 +#define CP11X_PCIE1_BASE f4620000 +#define CP11X_PCIE2_BASE f4640000 + +#include "armada-cp115.dtsi" + +#undef CP11X_NAME +#undef CP11X_BASE +#undef CP11X_PCIEx_MEM_BASE +#undef CP11X_PCIEx_MEM_SIZE +#undef CP11X_PCIE0_BASE +#undef CP11X_PCIE1_BASE +#undef CP11X_PCIE2_BASE + +&cp1_crypto { + status = "disabled"; +}; + +&cp1_ethernet { + status = "okay"; +}; + +/* CON50 */ +&cp1_eth0 { + status = "disabled"; + phy-mode = "10gbase-kr"; + /* Generic PHY, providing serdes lanes */ + phys = <&cp1_comphy4 0>; + managed = "in-band-status"; + sfp = <&cp1_sfp_eth1>; +}; + +&cp1_gpio1 { + status = "okay"; +}; + +&cp1_gpio2 { + status = "okay"; +}; + +&cp1_i2c0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&cp1_i2c0_pins>; + clock-frequency = <100000>; +}; + +/* CON40 */ +&cp1_pcie0 { + pinctrl-names = "default"; + pinctrl-0 = <&cp1_pcie_reset_pins>; + num-lanes = <2>; + num-viewport = <8>; + marvell,reset-gpio = <&cp1_gpio1 0 GPIO_ACTIVE_HIGH>; + status = "okay"; + /* Generic PHY, providing serdes lanes */ + phys = <&cp1_comphy0 0 + &cp1_comphy1 0>; +}; + +&cp1_sata0 { + status = "okay"; + + /* CON32 */ + sata-port@1 { + /* Generic PHY, providing serdes lanes */ + phys = <&cp1_comphy5 1>; + }; +}; + +/* U24 */ +&cp1_spi1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&cp1_spi0_pins>; + reg = <0x700680 0x50>; + + spi-flash@0 { + #address-cells = <0x1>; + #size-cells = <0x1>; + compatible = "jedec,spi-nor"; + reg = <0x0>; + /* On-board MUX does not allow higher frequencies */ + spi-max-frequency = <40000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "U-Boot-1"; + reg = <0x0 0x200000>; + }; + + partition@400000 { + label = "Filesystem-1"; + reg = <0x200000 0xe00000>; + }; + }; + }; + +}; + +&cp1_syscon0 { + cp1_pinctrl: pinctrl { + compatible = "marvell,cp115-standalone-pinctrl"; + + cp1_i2c0_pins: cp1-i2c-pins-0 { + marvell,pins = "mpp37", "mpp38"; + marvell,function = "i2c0"; + }; + cp1_spi0_pins: cp1-spi-pins-0 { + marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16"; + marvell,function = "spi1"; + }; + cp1_xhci0_vbus_pins: cp1-xhci0-vbus-pins { + marvell,pins = "mpp3"; + marvell,function = "gpio"; + }; + cp1_sfp_pins: sfp-pins { + marvell,pins = "mpp8", "mpp9", "mpp10", "mpp11"; + marvell,function = "gpio"; + }; + cp1_pcie_reset_pins: cp1-pcie-reset-pins { + marvell,pins = "mpp0"; + marvell,function = "gpio"; + }; + }; +}; + +/* CON58 */ +&cp1_usb3_1 { + status = "okay"; + usb-phy = <&cp1_usb3_0_phy0>; + /* Generic PHY, providing serdes lanes */ + phys = <&cp1_comphy3 1>; + phy-names = "usb"; +}; diff --git a/arch/arm64/boot/dts/marvell/cn9132-db.dts b/arch/arm64/boot/dts/marvell/cn9132-db.dts new file mode 100644 index 000000000000..4ef0df3097ca --- /dev/null +++ b/arch/arm64/boot/dts/marvell/cn9132-db.dts @@ -0,0 +1,221 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2019 Marvell International Ltd. + * + * Device tree for the CN9132-DB board. + */ + +#include "cn9131-db.dts" + +/ { + model = "Marvell Armada CN9132-DB"; + compatible = "marvell,cn9132", "marvell,cn9131", "marvell,cn9130", + "marvell,armada-ap807-quad", "marvell,armada-ap807"; + + aliases { + gpio5 = &cp2_gpio1; + gpio6 = &cp2_gpio2; + ethernet5 = &cp2_eth0; + }; + + cp2_reg_usb3_vbus0: cp2_usb3_vbus@0 { + compatible = "regulator-fixed"; + regulator-name = "cp2-xhci0-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&cp2_gpio1 2 GPIO_ACTIVE_HIGH>; + }; + + cp2_usb3_0_phy0: cp2_usb3_phy0 { + compatible = "usb-nop-xceiv"; + vcc-supply = <&cp2_reg_usb3_vbus0>; + }; + + cp2_reg_usb3_vbus1: cp2_usb3_vbus@1 { + compatible = "regulator-fixed"; + regulator-name = "cp2-xhci1-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&cp2_gpio1 3 GPIO_ACTIVE_HIGH>; + }; + + cp2_usb3_0_phy1: cp2_usb3_phy1 { + compatible = "usb-nop-xceiv"; + vcc-supply = <&cp2_reg_usb3_vbus1>; + }; + + cp2_reg_sd_vccq: cp2_sd_vccq@0 { + compatible = "regulator-gpio"; + regulator-name = "cp2_sd_vcc"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + gpios = <&cp2_gpio2 17 GPIO_ACTIVE_HIGH>; + states = <1800000 0x1 3300000 0x0>; + }; + + cp2_sfp_eth0: sfp-eth0 { + compatible = "sff,sfp"; + i2c-bus = <&cp2_sfpp0_i2c>; + los-gpio = <&cp2_module_expander1 11 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&cp2_module_expander1 10 GPIO_ACTIVE_LOW>; + tx-disable-gpio = <&cp2_module_expander1 9 GPIO_ACTIVE_HIGH>; + tx-fault-gpio = <&cp2_module_expander1 8 GPIO_ACTIVE_HIGH>; + /* + * SFP cages are unconnected on early PCBs because of an the I2C + * lanes not being connected. Prevent the port for being + * unusable by disabling the SFP node. + */ + status = "disabled"; + }; +}; + +/* + * Instantiate the second slave CP115 + */ + +#define CP11X_NAME cp2 +#define CP11X_BASE f6000000 +#define CP11X_PCIEx_MEM_BASE(iface) (0xe5000000 + (iface * 0x1000000)) +#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000 +#define CP11X_PCIE0_BASE f6600000 +#define CP11X_PCIE1_BASE f6620000 +#define CP11X_PCIE2_BASE f6640000 + +#include "armada-cp115.dtsi" + +#undef CP11X_NAME +#undef CP11X_BASE +#undef CP11X_PCIEx_MEM_BASE +#undef CP11X_PCIEx_MEM_SIZE +#undef CP11X_PCIE0_BASE +#undef CP11X_PCIE1_BASE +#undef CP11X_PCIE2_BASE + +&cp2_crypto { + status = "disabled"; +}; + +&cp2_ethernet { + status = "okay"; +}; + +/* SLM-1521-V2, CON9 */ +&cp2_eth0 { + status = "disabled"; + phy-mode = "10gbase-kr"; + /* Generic PHY, providing serdes lanes */ + phys = <&cp2_comphy4 0>; + managed = "in-band-status"; + sfp = <&cp2_sfp_eth0>; +}; + +&cp2_gpio1 { + status = "okay"; +}; + +&cp2_gpio2 { + status = "okay"; +}; + +&cp2_i2c0 { + clock-frequency = <100000>; + + /* SLM-1521-V2 - U3 */ + i2c-mux@72 { + compatible = "nxp,pca9544"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x72>; + cp2_sfpp0_i2c: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + /* U12 */ + cp2_module_expander1: pca9555@21 { + compatible = "nxp,pca9555"; + pinctrl-names = "default"; + gpio-controller; + #gpio-cells = <2>; + reg = <0x21>; + }; + }; + }; +}; + +/* SLM-1521-V2, CON6 */ +&cp2_pcie0 { + status = "okay"; + num-lanes = <2>; + num-viewport = <8>; + /* Generic PHY, providing serdes lanes */ + phys = <&cp2_comphy0 0 + &cp2_comphy1 0>; +}; + +/* SLM-1521-V2, CON8 */ +&cp2_pcie2 { + status = "okay"; + num-lanes = <1>; + num-viewport = <8>; + /* Generic PHY, providing serdes lanes */ + phys = <&cp2_comphy5 2>; +}; + +&cp2_sata0 { + status = "okay"; + + /* SLM-1521-V2, CON4 */ + sata-port@0 { + /* Generic PHY, providing serdes lanes */ + phys = <&cp2_comphy2 0>; + }; +}; + +/* CON 2 on SLM-1683 - microSD */ +&cp2_sdhci0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&cp2_sdhci_pins>; + bus-width = <4>; + cd-gpios = <&cp2_gpio2 23 GPIO_ACTIVE_LOW>; + vqmmc-supply = <&cp2_reg_sd_vccq>; +}; + +&cp2_syscon0 { + cp2_pinctrl: pinctrl { + compatible = "marvell,cp115-standalone-pinctrl"; + + cp2_i2c0_pins: cp2-i2c-pins-0 { + marvell,pins = "mpp37", "mpp38"; + marvell,function = "i2c0"; + }; + cp2_sdhci_pins: cp2-sdhi-pins-0 { + marvell,pins = "mpp56", "mpp57", "mpp58", + "mpp59", "mpp60", "mpp61"; + marvell,function = "sdio"; + }; + }; +}; + +&cp2_usb3_0 { + status = "okay"; + usb-phy = <&cp2_usb3_0_phy0>; + phy-names = "usb"; +}; + +/* SLM-1521-V2, CON11 */ +&cp2_usb3_1 { + status = "okay"; + usb-phy = <&cp2_usb3_0_phy1>; + phy-names = "usb"; + /* Generic PHY, providing serdes lanes */ + phys = <&cp2_comphy3 1>; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts index 710c5c3d87d3..83e10591e0e5 100644 --- a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts +++ b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts @@ -115,24 +115,34 @@ }; ð { - pinctrl-names = "default"; - pinctrl-0 = <ð_pins>; status = "okay"; + gmac0: mac@0 { + compatible = "mediatek,eth-mac"; + reg = <0>; + phy-mode = "2500base-x"; + + fixed-link { + speed = <2500>; + full-duplex; + pause; + }; + }; gmac1: mac@1 { compatible = "mediatek,eth-mac"; reg = <1>; - phy-handle = <&phy5>; + phy-mode = "rgmii"; + + fixed-link { + speed = <1000>; + full-duplex; + pause; + }; }; - mdio-bus { + mdio: mdio-bus { #address-cells = <1>; #size-cells = <0>; - - phy5: ethernet-phy@5 { - reg = <5>; - phy-mode = "sgmii"; - }; }; }; diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi b/arch/arm64/boot/dts/mediatek/mt7622.dtsi index d1e13d340e26..dac51e98204c 100644 --- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi @@ -931,6 +931,5 @@ "syscon"; reg = <0 0x1b128000 0 0x3000>; #clock-cells = <1>; - mediatek,physpeed = "2500"; }; }; diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi index 15f1842f6df3..8b4e806d5119 100644 --- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi @@ -157,6 +157,7 @@ enable-method = "psci"; cpu-idle-states = <&CPU_SLEEP_0>; #cooling-cells = <2>; + dynamic-power-coefficient = <263>; clocks = <&infracfg CLK_INFRA_CA53SEL>, <&apmixedsys CLK_APMIXED_MAINPLL>; clock-names = "cpu", "intermediate"; @@ -170,6 +171,7 @@ enable-method = "psci"; cpu-idle-states = <&CPU_SLEEP_0>; #cooling-cells = <2>; + dynamic-power-coefficient = <263>; clocks = <&infracfg CLK_INFRA_CA53SEL>, <&apmixedsys CLK_APMIXED_MAINPLL>; clock-names = "cpu", "intermediate"; @@ -183,6 +185,7 @@ enable-method = "psci"; cpu-idle-states = <&CPU_SLEEP_0>; #cooling-cells = <2>; + dynamic-power-coefficient = <530>; clocks = <&infracfg CLK_INFRA_CA72SEL>, <&apmixedsys CLK_APMIXED_MAINPLL>; clock-names = "cpu", "intermediate"; @@ -196,6 +199,7 @@ enable-method = "psci"; cpu-idle-states = <&CPU_SLEEP_0>; #cooling-cells = <2>; + dynamic-power-coefficient = <530>; clocks = <&infracfg CLK_INFRA_CA72SEL>, <&apmixedsys CLK_APMIXED_MAINPLL>; clock-names = "cpu", "intermediate"; @@ -1401,6 +1405,20 @@ <&topckgen CLK_TOP_UNIVPLL1_D2>; }; + jpegdec: jpegdec@18004000 { + compatible = "mediatek,mt8173-jpgdec"; + reg = <0 0x18004000 0 0x1000>; + interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_LOW>; + clocks = <&vencsys CLK_VENC_CKE0>, + <&vencsys CLK_VENC_CKE3>; + clock-names = "jpgdec-smi", + "jpgdec"; + power-domains = <&scpsys MT8173_POWER_DOMAIN_VENC>; + mediatek,larb = <&larb3>; + iommus = <&iommu M4U_PORT_JPGDEC_WDMA>, + <&iommu M4U_PORT_JPGDEC_BSDMA>; + }; + vencltsys: clock-controller@19000000 { compatible = "mediatek,mt8173-vencltsys", "syscon"; reg = <0 0x19000000 0 0x1000>; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-evb.dts b/arch/arm64/boot/dts/mediatek/mt8183-evb.dts index d8e555cbb5d3..1fb195c683c3 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-evb.dts +++ b/arch/arm64/boot/dts/mediatek/mt8183-evb.dts @@ -30,7 +30,103 @@ status = "okay"; }; +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c_pins_0>; + status = "okay"; + clock-frequency = <100000>; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c_pins_1>; + status = "okay"; + clock-frequency = <100000>; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c_pins_2>; + status = "okay"; + clock-frequency = <100000>; +}; + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c_pins_3>; + status = "okay"; + clock-frequency = <100000>; +}; + +&i2c4 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c_pins_4>; + status = "okay"; + clock-frequency = <1000000>; +}; + +&i2c5 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c_pins_5>; + status = "okay"; + clock-frequency = <1000000>; +}; + &pio { + i2c_pins_0: i2c0{ + pins_i2c{ + pinmux = <PINMUX_GPIO82__FUNC_SDA0>, + <PINMUX_GPIO83__FUNC_SCL0>; + mediatek,pull-up-adv = <3>; + mediatek,drive-strength-adv = <00>; + }; + }; + + i2c_pins_1: i2c1{ + pins_i2c{ + pinmux = <PINMUX_GPIO81__FUNC_SDA1>, + <PINMUX_GPIO84__FUNC_SCL1>; + mediatek,pull-up-adv = <3>; + mediatek,drive-strength-adv = <00>; + }; + }; + + i2c_pins_2: i2c2{ + pins_i2c{ + pinmux = <PINMUX_GPIO103__FUNC_SCL2>, + <PINMUX_GPIO104__FUNC_SDA2>; + mediatek,pull-up-adv = <3>; + mediatek,drive-strength-adv = <00>; + }; + }; + + i2c_pins_3: i2c3{ + pins_i2c{ + pinmux = <PINMUX_GPIO50__FUNC_SCL3>, + <PINMUX_GPIO51__FUNC_SDA3>; + mediatek,pull-up-adv = <3>; + mediatek,drive-strength-adv = <00>; + }; + }; + + i2c_pins_4: i2c4{ + pins_i2c{ + pinmux = <PINMUX_GPIO105__FUNC_SCL4>, + <PINMUX_GPIO106__FUNC_SDA4>; + mediatek,pull-up-adv = <3>; + mediatek,drive-strength-adv = <00>; + }; + }; + + i2c_pins_5: i2c5{ + pins_i2c{ + pinmux = <PINMUX_GPIO48__FUNC_SCL5>, + <PINMUX_GPIO49__FUNC_SDA5>; + mediatek,pull-up-adv = <3>; + mediatek,drive-strength-adv = <00>; + }; + }; + spi_pins_0: spi0{ pins_spi{ pinmux = <PINMUX_GPIO85__FUNC_SPI0_MI>, diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi index c2749c4631bc..124f9d3e09f5 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi @@ -8,6 +8,7 @@ #include <dt-bindings/clock/mt8183-clk.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/reset-controller/mt8183-resets.h> #include "mt8183-pinfunc.h" / { @@ -16,6 +17,21 @@ #address-cells = <2>; #size-cells = <2>; + aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; + i2c5 = &i2c5; + i2c6 = &i2c6; + i2c7 = &i2c7; + i2c8 = &i2c8; + i2c9 = &i2c9; + i2c10 = &i2c10; + i2c11 = &i2c11; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -212,6 +228,7 @@ compatible = "mediatek,mt8183-infracfg", "syscon"; reg = <0 0x10001000 0 0x1000>; #clock-cells = <1>; + #reset-cells = <1>; }; pio: pinctrl@10005000 { @@ -248,12 +265,30 @@ compatible = "mediatek,mt8183-pwrap"; reg = <0 0x1000d000 0 0x1000>; reg-names = "pwrap"; - interrupts = <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>; clocks = <&topckgen CLK_TOP_MUX_PMICSPI>, <&infracfg CLK_INFRA_PMIC_AP>; clock-names = "spi", "wrap"; }; + systimer: timer@10017000 { + compatible = "mediatek,mt8183-timer", + "mediatek,mt6765-timer"; + reg = <0 0x10017000 0 0x1000>; + interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&topckgen CLK_TOP_CLK13M>; + clock-names = "clk13m"; + }; + + gce: mailbox@10238000 { + compatible = "mediatek,mt8183-gce"; + reg = <0 0x10238000 0 0x4000>; + interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_LOW>; + #mbox-cells = <3>; + clocks = <&infracfg CLK_INFRA_GCE>; + clock-names = "gce"; + }; + auxadc: auxadc@11001000 { compatible = "mediatek,mt8183-auxadc", "mediatek,mt8173-auxadc"; @@ -294,6 +329,64 @@ status = "disabled"; }; + i2c6: i2c@11005000 { + compatible = "mediatek,mt8183-i2c"; + reg = <0 0x11005000 0 0x1000>, + <0 0x11000600 0 0x80>; + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_LOW>; + clocks = <&infracfg CLK_INFRA_I2C6>, + <&infracfg CLK_INFRA_AP_DMA>; + clock-names = "main", "dma"; + clock-div = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c0: i2c@11007000 { + compatible = "mediatek,mt8183-i2c"; + reg = <0 0x11007000 0 0x1000>, + <0 0x11000080 0 0x80>; + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_LOW>; + clocks = <&infracfg CLK_INFRA_I2C0>, + <&infracfg CLK_INFRA_AP_DMA>; + clock-names = "main", "dma"; + clock-div = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c4: i2c@11008000 { + compatible = "mediatek,mt8183-i2c"; + reg = <0 0x11008000 0 0x1000>, + <0 0x11000100 0 0x80>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_LOW>; + clocks = <&infracfg CLK_INFRA_I2C1>, + <&infracfg CLK_INFRA_AP_DMA>, + <&infracfg CLK_INFRA_I2C1_ARBITER>; + clock-names = "main", "dma","arb"; + clock-div = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@11009000 { + compatible = "mediatek,mt8183-i2c"; + reg = <0 0x11009000 0 0x1000>, + <0 0x11000280 0 0x80>; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_LOW>; + clocks = <&infracfg CLK_INFRA_I2C2>, + <&infracfg CLK_INFRA_AP_DMA>, + <&infracfg CLK_INFRA_I2C2_ARBITER>; + clock-names = "main", "dma", "arb"; + clock-div = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + spi0: spi@1100a000 { compatible = "mediatek,mt8183-spi"; #address-cells = <1>; @@ -307,6 +400,20 @@ status = "disabled"; }; + i2c3: i2c@1100f000 { + compatible = "mediatek,mt8183-i2c"; + reg = <0 0x1100f000 0 0x1000>, + <0 0x11000400 0 0x80>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_LOW>; + clocks = <&infracfg CLK_INFRA_I2C3>, + <&infracfg CLK_INFRA_AP_DMA>; + clock-names = "main", "dma"; + clock-div = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + spi1: spi@11010000 { compatible = "mediatek,mt8183-spi"; #address-cells = <1>; @@ -320,6 +427,20 @@ status = "disabled"; }; + i2c1: i2c@11011000 { + compatible = "mediatek,mt8183-i2c"; + reg = <0 0x11011000 0 0x1000>, + <0 0x11000480 0 0x80>; + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_LOW>; + clocks = <&infracfg CLK_INFRA_I2C4>, + <&infracfg CLK_INFRA_AP_DMA>; + clock-names = "main", "dma"; + clock-div = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + spi2: spi@11012000 { compatible = "mediatek,mt8183-spi"; #address-cells = <1>; @@ -346,6 +467,66 @@ status = "disabled"; }; + i2c9: i2c@11014000 { + compatible = "mediatek,mt8183-i2c"; + reg = <0 0x11014000 0 0x1000>, + <0 0x11000180 0 0x80>; + interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_LOW>; + clocks = <&infracfg CLK_INFRA_I2C1_IMM>, + <&infracfg CLK_INFRA_AP_DMA>, + <&infracfg CLK_INFRA_I2C1_ARBITER>; + clock-names = "main", "dma", "arb"; + clock-div = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c10: i2c@11015000 { + compatible = "mediatek,mt8183-i2c"; + reg = <0 0x11015000 0 0x1000>, + <0 0x11000300 0 0x80>; + interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_LOW>; + clocks = <&infracfg CLK_INFRA_I2C2_IMM>, + <&infracfg CLK_INFRA_AP_DMA>, + <&infracfg CLK_INFRA_I2C2_ARBITER>; + clock-names = "main", "dma", "arb"; + clock-div = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c5: i2c@11016000 { + compatible = "mediatek,mt8183-i2c"; + reg = <0 0x11016000 0 0x1000>, + <0 0x11000500 0 0x80>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_LOW>; + clocks = <&infracfg CLK_INFRA_I2C5>, + <&infracfg CLK_INFRA_AP_DMA>, + <&infracfg CLK_INFRA_I2C5_ARBITER>; + clock-names = "main", "dma", "arb"; + clock-div = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c11: i2c@11017000 { + compatible = "mediatek,mt8183-i2c"; + reg = <0 0x11017000 0 0x1000>, + <0 0x11000580 0 0x80>; + interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_LOW>; + clocks = <&infracfg CLK_INFRA_I2C5_IMM>, + <&infracfg CLK_INFRA_AP_DMA>, + <&infracfg CLK_INFRA_I2C5_ARBITER>; + clock-names = "main", "dma", "arb"; + clock-div = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + spi4: spi@11018000 { compatible = "mediatek,mt8183-spi"; #address-cells = <1>; @@ -372,6 +553,34 @@ status = "disabled"; }; + i2c7: i2c@1101a000 { + compatible = "mediatek,mt8183-i2c"; + reg = <0 0x1101a000 0 0x1000>, + <0 0x11000680 0 0x80>; + interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_LOW>; + clocks = <&infracfg CLK_INFRA_I2C7>, + <&infracfg CLK_INFRA_AP_DMA>; + clock-names = "main", "dma"; + clock-div = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c8: i2c@1101b000 { + compatible = "mediatek,mt8183-i2c"; + reg = <0 0x1101b000 0 0x1000>, + <0 0x11000700 0 0x80>; + interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_LOW>; + clocks = <&infracfg CLK_INFRA_I2C8>, + <&infracfg CLK_INFRA_AP_DMA>; + clock-names = "main", "dma"; + clock-div = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + audiosys: syscon@11220000 { compatible = "mediatek,mt8183-audiosys", "syscon"; reg = <0 0x11220000 0 0x1000>; diff --git a/arch/arm64/boot/dts/nvidia/tegra132.dtsi b/arch/arm64/boot/dts/nvidia/tegra132.dtsi index 631a7f77c386..6238e6e274b4 100644 --- a/arch/arm64/boot/dts/nvidia/tegra132.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra132.dtsi @@ -604,9 +604,11 @@ #iommu-cells = <1>; }; - emc: emc@7001b000 { + emc: external-memory-controller@7001b000 { compatible = "nvidia,tegra132-emc", "nvidia,tegra124-emc"; reg = <0x0 0x7001b000 0x0 0x1000>; + clocks = <&tegra_car TEGRA124_CLK_EMC>; + clock-names = "emc"; nvidia,memory-controller = <&mc>; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts index bdace01561ba..f1de4ff6230a 100644 --- a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts +++ b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts @@ -115,7 +115,7 @@ }; padctl@3520000 { - status = "disabled"; + status = "okay"; avdd-pll-erefeut-supply = <&vdd_1v8_pll>; avdd-usb-supply = <&vdd_3v3_sys>; @@ -193,7 +193,7 @@ }; usb@3530000 { - status = "disabled"; + status = "okay"; phys = <&{/padctl@3520000/pads/usb2/lanes/usb2-0}>, <&{/padctl@3520000/pads/usb2/lanes/usb2-1}>, @@ -253,10 +253,14 @@ status = "disabled"; }; + /* DP on E3320 */ sor@15540000 { - status = "disabled"; + status = "okay"; + + avdd-io-hdmi-dp-supply = <&vdd_hdmi_1v05>; + vdd-hdmi-dp-pll = <&vdd_1v8_ap>; - nvidia,dpaux = <&dpaux1>; + nvidia,dpaux = <&dpaux>; }; sor@15580000 { diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi b/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi index 5e18acf5cfad..947744d0f04c 100644 --- a/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi @@ -8,6 +8,7 @@ compatible = "nvidia,p3310", "nvidia,tegra186"; aliases { + ethernet0 = "/ethernet@2490000"; sdhci0 = "/sdhci@3460000"; sdhci1 = "/sdhci@3400000"; serial0 = &uarta; diff --git a/arch/arm64/boot/dts/nvidia/tegra186.dtsi b/arch/arm64/boot/dts/nvidia/tegra186.dtsi index 47cd831fcf44..c905527c26ef 100644 --- a/arch/arm64/boot/dts/nvidia/tegra186.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra186.dtsi @@ -142,7 +142,29 @@ memory-controller@2c00000 { compatible = "nvidia,tegra186-mc"; reg = <0x0 0x02c00000 0x0 0xb0000>; + interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; + + #address-cells = <2>; + #size-cells = <2>; + + ranges = <0x0 0x02c00000 0x0 0x02c00000 0x0 0xb0000>; + + /* + * Memory clients have access to all 40 bits that the memory + * controller can address. + */ + dma-ranges = <0x0 0x0 0x0 0x0 0x100 0x0>; + + emc: external-memory-controller@2c60000 { + compatible = "nvidia,tegra186-emc"; + reg = <0x0 0x02c60000 0x0 0x50000>; + interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bpmp TEGRA186_CLK_EMC>; + clock-names = "emc"; + + nvidia,bpmp = <&bpmp>; + }; }; uarta: serial@3100000 { @@ -524,11 +546,9 @@ reg = <0x0 0x03530000 0x0 0x8000>, <0x0 0x03538000 0x0 0x1000>; reg-names = "hcd", "fpci"; - interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&bpmp TEGRA186_CLK_XUSB_HOST>, <&bpmp TEGRA186_CLK_XUSB_FALCON>, <&bpmp TEGRA186_CLK_XUSB_SS>, @@ -541,16 +561,15 @@ clock-names = "xusb_host", "xusb_falcon_src", "xusb_ss", "xusb_ss_src", "xusb_hs_src", "xusb_fs_src", "pll_u_480m", "clk_m", "pll_e"; - power-domains = <&bpmp TEGRA186_POWER_DOMAIN_XUSBC>, <&bpmp TEGRA186_POWER_DOMAIN_XUSBA>; power-domain-names = "xusb_host", "xusb_ss"; - nvidia,xusb-padctl = <&padctl>; - - status = "disabled"; - + iommus = <&smmu TEGRA186_SID_XUSB_HOST>; #address-cells = <1>; #size-cells = <0>; + status = "disabled"; + + nvidia,xusb-padctl = <&padctl>; }; fuse@3820000 { @@ -1018,6 +1037,7 @@ reset-names = "vic"; power-domains = <&bpmp TEGRA186_POWER_DOMAIN_VIC>; + iommus = <&smmu TEGRA186_SID_VIC>; }; dsib: dsi@15400000 { @@ -1060,7 +1080,7 @@ }; sor1: sor@15580000 { - compatible = "nvidia,tegra186-sor1"; + compatible = "nvidia,tegra186-sor"; reg = <0x15580000 0x10000>; interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>; clocks = <&bpmp TEGRA186_CLK_SOR1>, diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi b/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi index 62e07e1197cc..bdd33ff4e324 100644 --- a/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi @@ -8,17 +8,18 @@ compatible = "nvidia,p2888", "nvidia,tegra194"; aliases { - sdhci0 = "/cbb/sdhci@3460000"; - sdhci1 = "/cbb/sdhci@3400000"; + ethernet0 = "/cbb@0/ethernet@2490000"; + sdhci0 = "/cbb@0/sdhci@3460000"; + sdhci1 = "/cbb@0/sdhci@3400000"; serial0 = &tcu; i2c0 = "/bpmp/i2c"; - i2c1 = "/cbb/i2c@3160000"; - i2c2 = "/cbb/i2c@c240000"; - i2c3 = "/cbb/i2c@3180000"; - i2c4 = "/cbb/i2c@3190000"; - i2c5 = "/cbb/i2c@31c0000"; - i2c6 = "/cbb/i2c@c250000"; - i2c7 = "/cbb/i2c@31e0000"; + i2c1 = "/cbb@0/i2c@3160000"; + i2c2 = "/cbb@0/i2c@c240000"; + i2c3 = "/cbb@0/i2c@3180000"; + i2c4 = "/cbb@0/i2c@3190000"; + i2c5 = "/cbb@0/i2c@31c0000"; + i2c6 = "/cbb@0/i2c@c250000"; + i2c7 = "/cbb@0/i2c@31e0000"; }; chosen { @@ -26,7 +27,7 @@ stdout-path = "serial0:115200n8"; }; - cbb { + cbb@0 { ethernet@2490000 { status = "okay"; @@ -47,6 +48,10 @@ }; }; + memory-controller@2c00000 { + status = "okay"; + }; + serial@3110000 { status = "okay"; }; @@ -168,7 +173,7 @@ in-ldo7-8-supply = <&vdd_1v8ls>; vdd_1v0: sd0 { - regulator-name = "VDD_1V0"; + regulator-name = "VDDIO_SYS_1V0"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; regulator-always-on; @@ -176,7 +181,7 @@ }; vdd_1v8hs: sd1 { - regulator-name = "VDD_1V8HS"; + regulator-name = "VDDIO_SYS_1V8HS"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; @@ -184,7 +189,7 @@ }; vdd_1v8ls: sd2 { - regulator-name = "VDD_1V8LS"; + regulator-name = "VDDIO_SYS_1V8LS"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; @@ -192,7 +197,7 @@ }; vdd_1v8ao: sd3 { - regulator-name = "VDD_1V8AO"; + regulator-name = "VDDIO_AO_1V8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; @@ -216,7 +221,7 @@ }; ldo2 { - regulator-name = "VDD_AO_3V3"; + regulator-name = "VDDIO_AO_3V3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; @@ -242,7 +247,7 @@ }; ldo7 { - regulator-name = "VDD_CSI_1V2"; + regulator-name = "AVDD_CSI_1V2"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; }; @@ -289,5 +294,28 @@ gpio = <&gpio TEGRA194_MAIN_GPIO(A, 3) GPIO_ACTIVE_HIGH>; enable-active-high; }; + + vdd_3v3_pcie: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + + regulator-name = "PEX_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio TEGRA194_MAIN_GPIO(Z, 2) GPIO_ACTIVE_HIGH>; + regulator-boot-on; + enable-active-high; + }; + + vdd_12v_pcie: regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + + regulator-name = "VDD_12V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + gpio = <&gpio TEGRA194_MAIN_GPIO(A, 1) GPIO_ACTIVE_HIGH>; + regulator-boot-on; + }; }; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts b/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts index 23597d53c9c9..985e7d84f161 100644 --- a/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts +++ b/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts @@ -10,8 +10,8 @@ model = "NVIDIA Jetson AGX Xavier Developer Kit"; compatible = "nvidia,p2972-0000", "nvidia,tegra194"; - cbb { - aconnect { + cbb@0 { + aconnect@2900000 { status = "okay"; dma-controller@2930000 { @@ -46,10 +46,39 @@ status = "okay"; }; + dpaux@155c0000 { + status = "okay"; + }; + + dpaux@155d0000 { + status = "okay"; + }; + dpaux@155e0000 { status = "okay"; }; + /* DP0 */ + sor@15b00000 { + status = "okay"; + + avdd-io-hdmi-dp-supply = <&vdd_1v0>; + vdd-hdmi-dp-pll-supply = <&vdd_1v8hs>; + + nvidia,dpaux = <&dpaux0>; + }; + + /* DP1 */ + sor@15b40000 { + status = "okay"; + + avdd-io-hdmi-dp-supply = <&vdd_1v0>; + vdd-hdmi-dp-pll-supply = <&vdd_1v8hs>; + + nvidia,dpaux = <&dpaux1>; + }; + + /* HDMI */ sor@15b80000 { status = "okay"; @@ -93,9 +122,11 @@ }; pcie@141a0000 { - status = "disabled"; + status = "okay"; vddio-pex-ctl-supply = <&vdd_1v8ao>; + vpcie3v3-supply = <&vdd_3v3_pcie>; + vpcie12v-supply = <&vdd_12v_pcie>; phys = <&p2u_nvhs_0>, <&p2u_nvhs_1>, <&p2u_nvhs_2>, <&p2u_nvhs_3>, <&p2u_nvhs_4>, <&p2u_nvhs_5>, @@ -121,7 +152,7 @@ gpios = <&gpio TEGRA194_MAIN_GPIO(G, 0) GPIO_ACTIVE_LOW>; linux,input-type = <EV_KEY>; - linux,code = <BTN_1>; + linux,code = <KEY_SLEEP>; debounce-interval = <10>; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra194.dtsi b/arch/arm64/boot/dts/nvidia/tegra194.dtsi index adebbbf36bd0..ccac43be12ac 100644 --- a/arch/arm64/boot/dts/nvidia/tegra194.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra194.dtsi @@ -3,9 +3,11 @@ #include <dt-bindings/gpio/tegra194-gpio.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/mailbox/tegra186-hsp.h> -#include <dt-bindings/reset/tegra194-reset.h> +#include <dt-bindings/pinctrl/pinctrl-tegra.h> #include <dt-bindings/power/tegra194-powergate.h> +#include <dt-bindings/reset/tegra194-reset.h> #include <dt-bindings/thermal/tegra194-bpmp-thermal.h> +#include <dt-bindings/memory/tegra194-mc.h> / { compatible = "nvidia,tegra194"; @@ -14,12 +16,18 @@ #size-cells = <2>; /* control backbone */ - cbb { + cbb@0 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x0 0x0 0x40000000>; + misc@100000 { + compatible = "nvidia,tegra194-misc"; + reg = <0x00100000 0xf000>, + <0x0010f000 0x1000>; + }; + gpio: gpio@2200000 { compatible = "nvidia,tegra194-gpio"; reg-names = "security", "gpio"; @@ -38,7 +46,8 @@ }; ethernet@2490000 { - compatible = "nvidia,tegra186-eqos", + compatible = "nvidia,tegra194-eqos", + "nvidia,tegra186-eqos", "snps,dwc-qos-ethernet-4.10"; reg = <0x02490000 0x10000>; interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>; @@ -59,7 +68,7 @@ snps,rxpbl = <8>; }; - aconnect { + aconnect@2900000 { compatible = "nvidia,tegra194-aconnect", "nvidia,tegra210-aconnect"; clocks = <&bpmp TEGRA194_CLK_APE>, @@ -130,6 +139,80 @@ }; }; + pinmux: pinmux@2430000 { + compatible = "nvidia,tegra194-pinmux"; + reg = <0x2430000 0x17000 + 0xc300000 0x4000>; + + status = "okay"; + + pex_rst_c5_out_state: pex_rst_c5_out { + pex_rst { + nvidia,pins = "pex_l5_rst_n_pgg1"; + nvidia,schmitt = <TEGRA_PIN_DISABLE>; + nvidia,lpdr = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,io-high-voltage = <TEGRA_PIN_ENABLE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + }; + }; + + clkreq_c5_bi_dir_state: clkreq_c5_bi_dir { + clkreq { + nvidia,pins = "pex_l5_clkreq_n_pgg0"; + nvidia,schmitt = <TEGRA_PIN_DISABLE>; + nvidia,lpdr = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,io-high-voltage = <TEGRA_PIN_ENABLE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + }; + }; + }; + + mc: memory-controller@2c00000 { + compatible = "nvidia,tegra194-mc"; + reg = <0x02c00000 0x100000>, + <0x02b80000 0x040000>, + <0x01700000 0x100000>; + status = "disabled"; + + #address-cells = <2>; + #size-cells = <2>; + + ranges = <0x01700000 0x0 0x01700000 0x0 0x100000>, + <0x02b80000 0x0 0x02b80000 0x0 0x040000>, + <0x02c00000 0x0 0x02c00000 0x0 0x100000>; + + /* + * Bit 39 of addresses passing through the memory + * controller selects the XBAR format used when memory + * is accessed. This is used to transparently access + * memory in the XBAR format used by the discrete GPU + * (bit 39 set) or Tegra (bit 39 clear). + * + * As a consequence, the operating system must ensure + * that bit 39 is never used implicitly, for example + * via an I/O virtual address mapping of an IOMMU. If + * devices require access to the XBAR switch, their + * drivers must set this bit explicitly. + * + * Limit the DMA range for memory clients to [38:0]. + */ + dma-ranges = <0x0 0x0 0x0 0x80 0x0>; + + emc: external-memory-controller@2c60000 { + compatible = "nvidia,tegra194-emc"; + reg = <0x0 0x02c60000 0x0 0x90000>, + <0x0 0x01780000 0x0 0x80000>; + clocks = <&bpmp TEGRA194_CLK_EMC>; + clock-names = "emc"; + + nvidia,bpmp = <&bpmp>; + }; + }; + uarta: serial@3100000 { compatible = "nvidia,tegra194-uart", "nvidia,tegra20-uart"; reg = <0x03100000 0x40>; @@ -454,6 +537,13 @@ status = "disabled"; }; + fuse@3820000 { + compatible = "nvidia,tegra194-efuse"; + reg = <0x03820000 0x10000>; + clocks = <&bpmp TEGRA194_CLK_FUSE>; + clock-names = "fuse"; + }; + gic: interrupt-controller@3881000 { compatible = "arm,gic-400"; #interrupt-cells = <3>; @@ -1045,7 +1135,7 @@ sor1: sor@15b40000 { compatible = "nvidia,tegra194-sor"; - reg = <0x155c0000 0x40000>; + reg = <0x15b40000 0x40000>; interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>; clocks = <&bpmp TEGRA194_CLK_SOR1_REF>, <&bpmp TEGRA194_CLK_SOR1_OUT>, @@ -1152,7 +1242,6 @@ nvidia,bpmp = <&bpmp 1>; - supports-clkreq; nvidia,aspm-cmrt-us = <60>; nvidia,aspm-pwr-on-t-us = <20>; nvidia,aspm-l0s-entrance-latency-us = <3>; @@ -1198,7 +1287,6 @@ nvidia,bpmp = <&bpmp 2>; - supports-clkreq; nvidia,aspm-cmrt-us = <60>; nvidia,aspm-pwr-on-t-us = <20>; nvidia,aspm-l0s-entrance-latency-us = <3>; @@ -1244,7 +1332,6 @@ nvidia,bpmp = <&bpmp 3>; - supports-clkreq; nvidia,aspm-cmrt-us = <60>; nvidia,aspm-pwr-on-t-us = <20>; nvidia,aspm-l0s-entrance-latency-us = <3>; @@ -1290,7 +1377,6 @@ nvidia,bpmp = <&bpmp 4>; - supports-clkreq; nvidia,aspm-cmrt-us = <60>; nvidia,aspm-pwr-on-t-us = <20>; nvidia,aspm-l0s-entrance-latency-us = <3>; @@ -1336,7 +1422,6 @@ nvidia,bpmp = <&bpmp 0>; - supports-clkreq; nvidia,aspm-cmrt-us = <60>; nvidia,aspm-pwr-on-t-us = <20>; nvidia,aspm-l0s-entrance-latency-us = <3>; @@ -1365,6 +1450,9 @@ num-viewport = <8>; linux,pci-domain = <5>; + pinctrl-names = "default"; + pinctrl-0 = <&pex_rst_c5_out_state>, <&clkreq_c5_bi_dir_state>; + clocks = <&bpmp TEGRA194_CLK_PEX1_CORE_5>, <&bpmp TEGRA194_CLK_PEX1_CORE_5M>; clock-names = "core", "core_m"; @@ -1383,7 +1471,6 @@ interrupt-map-mask = <0 0 0 0>; interrupt-map = <0 0 0 0 &gic GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; - supports-clkreq; nvidia,aspm-cmrt-us = <60>; nvidia,aspm-pwr-on-t-us = <20>; nvidia,aspm-l0s-entrance-latency-us = <3>; @@ -1442,60 +1529,192 @@ #address-cells = <1>; #size-cells = <0>; - cpu@0 { + cpu0_0: cpu@0 { compatible = "nvidia,tegra194-carmel"; device_type = "cpu"; - reg = <0x10000>; + reg = <0x000>; enable-method = "psci"; + i-cache-size = <131072>; + i-cache-line-size = <64>; + i-cache-sets = <512>; + d-cache-size = <65536>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&l2c_0>; }; - cpu@1 { + cpu0_1: cpu@1 { compatible = "nvidia,tegra194-carmel"; device_type = "cpu"; - reg = <0x10001>; + reg = <0x001>; enable-method = "psci"; + i-cache-size = <131072>; + i-cache-line-size = <64>; + i-cache-sets = <512>; + d-cache-size = <65536>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&l2c_0>; }; - cpu@2 { + cpu1_0: cpu@100 { compatible = "nvidia,tegra194-carmel"; device_type = "cpu"; reg = <0x100>; enable-method = "psci"; + i-cache-size = <131072>; + i-cache-line-size = <64>; + i-cache-sets = <512>; + d-cache-size = <65536>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&l2c_1>; }; - cpu@3 { + cpu1_1: cpu@101 { compatible = "nvidia,tegra194-carmel"; device_type = "cpu"; reg = <0x101>; enable-method = "psci"; + i-cache-size = <131072>; + i-cache-line-size = <64>; + i-cache-sets = <512>; + d-cache-size = <65536>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&l2c_1>; }; - cpu@4 { + cpu2_0: cpu@200 { compatible = "nvidia,tegra194-carmel"; device_type = "cpu"; reg = <0x200>; enable-method = "psci"; + i-cache-size = <131072>; + i-cache-line-size = <64>; + i-cache-sets = <512>; + d-cache-size = <65536>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&l2c_2>; }; - cpu@5 { + cpu2_1: cpu@201 { compatible = "nvidia,tegra194-carmel"; device_type = "cpu"; reg = <0x201>; enable-method = "psci"; + i-cache-size = <131072>; + i-cache-line-size = <64>; + i-cache-sets = <512>; + d-cache-size = <65536>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&l2c_2>; }; - cpu@6 { + cpu3_0: cpu@300 { compatible = "nvidia,tegra194-carmel"; device_type = "cpu"; - reg = <0x10300>; + reg = <0x300>; enable-method = "psci"; + i-cache-size = <131072>; + i-cache-line-size = <64>; + i-cache-sets = <512>; + d-cache-size = <65536>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&l2c_3>; }; - cpu@7 { + cpu3_1: cpu@301 { compatible = "nvidia,tegra194-carmel"; device_type = "cpu"; - reg = <0x10301>; + reg = <0x301>; enable-method = "psci"; + i-cache-size = <131072>; + i-cache-line-size = <64>; + i-cache-sets = <512>; + d-cache-size = <65536>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&l2c_3>; + }; + + cpu-map { + cluster0 { + core0 { + cpu = <&cpu0_0>; + }; + + core1 { + cpu = <&cpu0_1>; + }; + }; + + cluster1 { + core0 { + cpu = <&cpu1_0>; + }; + + core1 { + cpu = <&cpu1_1>; + }; + }; + + cluster2 { + core0 { + cpu = <&cpu2_0>; + }; + + core1 { + cpu = <&cpu2_1>; + }; + }; + + cluster3 { + core0 { + cpu = <&cpu3_0>; + }; + + core1 { + cpu = <&cpu3_1>; + }; + }; + }; + + l2c_0: l2-cache0 { + cache-size = <2097152>; + cache-line-size = <64>; + cache-sets = <2048>; + next-level-cache = <&l3c>; + }; + + l2c_1: l2-cache1 { + cache-size = <2097152>; + cache-line-size = <64>; + cache-sets = <2048>; + next-level-cache = <&l3c>; + }; + + l2c_2: l2-cache2 { + cache-size = <2097152>; + cache-line-size = <64>; + cache-sets = <2048>; + next-level-cache = <&l3c>; + }; + + l2c_3: l2-cache3 { + cache-size = <2097152>; + cache-line-size = <64>; + cache-sets = <2048>; + next-level-cache = <&l3c>; + }; + + l3c: l3-cache { + cache-size = <4194304>; + cache-line-size = <64>; + cache-sets = <4096>; }; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi index 27723829d033..cb58f79deb48 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi @@ -279,6 +279,13 @@ pmc@7000e400 { nvidia,invert-interrupt; + nvidia,suspend-mode = <0>; + nvidia,cpu-pwr-good-time = <0>; + nvidia,cpu-pwr-off-time = <0>; + nvidia,core-pwr-good-time = <4587 3876>; + nvidia,core-pwr-off-time = <39065>; + nvidia,core-power-req-active-high; + nvidia,sys-clock-req-active-high; }; /* eMMC */ diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi index a7dc319214a4..b0095072bc28 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi @@ -1612,7 +1612,7 @@ regulator-name = "VDD_HDMI_5V0"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - gpio = <&exp1 12 GPIO_ACTIVE_LOW>; + gpio = <&exp1 12 GPIO_ACTIVE_HIGH>; enable-active-high; vin-supply = <&vdd_5v0_sys>; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts b/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts index 9d17ec707bce..9101d3a39cd2 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts +++ b/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts @@ -64,6 +64,16 @@ status = "okay"; }; + sor@54540000 { + status = "okay"; + + avdd-io-hdmi-dp-supply = <&avdd_io_edp_1v05>; + vdd-hdmi-dp-pll-supply = <&vdd_1v8>; + + nvidia,xbar-cfg = <2 1 0 3 4>; + nvidia,dpaux = <&dpaux>; + }; + sor@54580000 { status = "okay"; @@ -76,6 +86,10 @@ GPIO_ACTIVE_LOW>; nvidia,xbar-cfg = <0 1 2 3 4>; }; + + dpaux@545c0000 { + status = "okay"; + }; }; gpu@57000000 { @@ -382,6 +396,13 @@ pmc@7000e400 { nvidia,invert-interrupt; + nvidia,suspend-mode = <0>; + nvidia,cpu-pwr-good-time = <0>; + nvidia,cpu-pwr-off-time = <0>; + nvidia,core-pwr-good-time = <4587 3876>; + nvidia,core-pwr-off-time = <39065>; + nvidia,core-power-req-active-high; + nvidia,sys-clock-req-active-high; }; hda@70030000 { @@ -515,6 +536,19 @@ vmmc-supply = <&vdd_3v3_sd>; }; + sdhci@700b0400 { + status = "okay"; + bus-width = <4>; + + vqmmc-supply = <&vdd_1v8>; + vmmc-supply = <&vdd_3v3_sys>; + + non-removable; + cap-sdio-irq; + keep-power-in-suspend; + wakeup-source; + }; + clocks { compatible = "simple-bus"; #address-cells = <1>; @@ -552,6 +586,66 @@ }; }; + fan: fan { + compatible = "pwm-fan"; + pwms = <&pwm 3 45334>; + + cooling-levels = <0 64 128 255>; + #cooling-cells = <2>; + }; + + thermal-zones { + cpu { + trips { + cpu_trip_critical: critical { + temperature = <96500>; + hysteresis = <0>; + type = "critical"; + }; + + cpu_trip_hot: hot { + temperature = <70000>; + hysteresis = <2000>; + type = "hot"; + }; + + cpu_trip_active: active { + temperature = <50000>; + hysteresis = <2000>; + type = "active"; + }; + + cpu_trip_passive: passive { + temperature = <30000>; + hysteresis = <2000>; + type = "passive"; + }; + }; + + cooling-maps { + cpu-critical { + cooling-device = <&fan 3 3>; + trip = <&cpu_trip_critical>; + }; + + cpu-hot { + cooling-device = <&fan 2 2>; + trip = <&cpu_trip_hot>; + }; + + cpu-active { + cooling-device = <&fan 1 1>; + trip = <&cpu_trip_active>; + }; + + cpu-passive { + cooling-device = <&fan 0 0>; + trip = <&cpu_trip_passive>; + }; + }; + }; + }; + gpio-keys { compatible = "gpio-keys"; @@ -680,5 +774,19 @@ enable-gpios = <&pmic 6 GPIO_ACTIVE_HIGH>; vin-supply = <&vdd_5v0_sys>; }; + + avdd_io_edp_1v05: regulator@7 { + compatible = "regulator-fixed"; + reg = <7>; + + regulator-name = "AVDD_IO_EDP_1V05"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + + gpio = <&pmic 7 GPIO_ACTIVE_HIGH>; + enable-active-high; + + vin-supply = <&avdd_1v05_pll>; + }; }; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra210.dtsi b/arch/arm64/boot/dts/nvidia/tegra210.dtsi index 659753118e96..48c63256ba7f 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra210.dtsi @@ -254,10 +254,11 @@ reg = <0x0 0x54540000 0x0 0x00040000>; interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; clocks = <&tegra_car TEGRA210_CLK_SOR0>, + <&tegra_car TEGRA210_CLK_SOR0_OUT>, <&tegra_car TEGRA210_CLK_PLL_D_OUT0>, <&tegra_car TEGRA210_CLK_PLL_DP>, <&tegra_car TEGRA210_CLK_SOR_SAFE>; - clock-names = "sor", "parent", "dp", "safe"; + clock-names = "sor", "out", "parent", "dp", "safe"; resets = <&tegra_car 182>; reset-names = "sor"; pinctrl-0 = <&state_dpaux_aux>; @@ -768,7 +769,8 @@ rtc@7000e000 { compatible = "nvidia,tegra210-rtc", "nvidia,tegra20-rtc"; reg = <0x0 0x7000e000 0x0 0x100>; - interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <16 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&pmc>; clocks = <&tegra_car TEGRA210_CLK_RTC>; clock-names = "rtc"; }; @@ -778,6 +780,8 @@ reg = <0x0 0x7000e400 0x0 0x400>; clocks = <&tegra_car TEGRA210_CLK_PCLK>, <&clk32k_in>; clock-names = "pclk", "clk32k_in"; + #interrupt-cells = <2>; + interrupt-controller; powergates { pd_audio: aud { @@ -1438,6 +1442,16 @@ }; }; + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&{/cpus/cpu@0} &{/cpus/cpu@1} + &{/cpus/cpu@2} &{/cpus/cpu@3}>; + }; + timer { compatible = "arm,armv8-timer"; interrupts = <GIC_PPI 13 @@ -1457,7 +1471,9 @@ reg = <0x0 0x700e2000 0x0 0x600 /* SOC_THERM reg_base */ 0x0 0x60006000 0x0 0x400>; /* CAR reg_base */ reg-names = "soctherm-reg", "car-reg"; - interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "thermal", "edp"; clocks = <&tegra_car TEGRA210_CLK_TSENSOR>, <&tegra_car TEGRA210_CLK_SOC_THERM>; clock-names = "tsensor", "soctherm"; @@ -1504,6 +1520,7 @@ }; }; }; + mem { polling-delay-passive = <0>; polling-delay = <0>; @@ -1526,6 +1543,7 @@ */ }; }; + gpu { polling-delay-passive = <1000>; polling-delay = <0>; @@ -1554,6 +1572,7 @@ }; }; }; + pllx { polling-delay-passive = <0>; polling-delay = <0>; diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index 0a7e5dfce6f7..973c0f079659 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -1,16 +1,26 @@ # SPDX-License-Identifier: GPL-2.0 dtb-$(CONFIG_ARCH_QCOM) += apq8016-sbc.dtb dtb-$(CONFIG_ARCH_QCOM) += apq8096-db820c.dtb +dtb-$(CONFIG_ARCH_QCOM) += apq8096-ifc6640.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk01.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-mtp.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8916-longcheer-l8150.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-a3u-eur.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-a5u-eur.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8992-bullhead-rev-101.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8994-angler-rev-101.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8996-mtp.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8998-asus-novago-tp370ql.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8998-hp-envy-x2.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8998-lenovo-miix-630.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8998-mtp.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-idp.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-cheza-r1.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-cheza-r2.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-cheza-r3.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-db845c.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-mtp.dtb +dtb-$(CONFIG_ARCH_QCOM) += sdm850-lenovo-yoga-c630.dtb +dtb-$(CONFIG_ARCH_QCOM) += sm8150-mtp.dtb dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-1000.dtb dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-4000.dtb diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi index ec2f0de67993..aff218c1b7b6 100644 --- a/arch/arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi @@ -8,6 +8,15 @@ pinconf { pins = "gpio3"; function = PMIC_GPIO_FUNC_NORMAL; + input-disable; + output-high; + }; + }; + + usb_hub_reset_pm_device: usb_hub_reset_pm_device { + pinconf { + pins = "gpio3"; + function = PMIC_GPIO_FUNC_NORMAL; output-low; }; }; @@ -22,6 +31,16 @@ }; }; + usb_sw_sel_pm_device: usb_sw_sel_pm_device { + pinconf { + pins = "gpio4"; + function = PMIC_GPIO_FUNC_NORMAL; + power-source = <PM8916_GPIO_VPH>; + input-disable; + output-low; + }; + }; + pm8916_gpios_leds: pm8916_gpios_leds { pinconf { pins = "gpio1", "gpio2"; diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi index e12a36ce5d93..037e26b3f8d5 100644 --- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi @@ -358,14 +358,15 @@ }; usb@78d9000 { - extcon = <&usb_id>; + extcon = <&usb_id>, <&usb_id>; status = "okay"; adp-disable; hnp-disable; srp-disable; - dr_mode = "host"; - pinctrl-names = "default"; - pinctrl-0 = <&usb_sw_sel_pm>; + dr_mode = "otg"; + pinctrl-names = "default", "device"; + pinctrl-0 = <&usb_sw_sel_pm &usb_hub_reset_pm>; + pinctrl-1 = <&usb_sw_sel_pm_device &usb_hub_reset_pm_device>; ulpi { phy { v1p8-supply = <&pm8916_l7>; @@ -504,7 +505,7 @@ usb_id: usb-id { compatible = "linux,extcon-usb-gpio"; - vbus-gpio = <&msmgpio 121 GPIO_ACTIVE_HIGH>; + id-gpio = <&msmgpio 121 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&usb_id_default>; }; diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c-pins.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c-pins.dtsi deleted file mode 100644 index a5cc80d6e82f..000000000000 --- a/arch/arm64/boot/dts/qcom/apq8096-db820c-pins.dtsi +++ /dev/null @@ -1,109 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (c) 2013-2016, The Linux Foundation. All rights reserved. - */ -&msmgpio { - sdc2_cd_on: sdc2_cd_on { - mux { - pins = "gpio38"; - function = "gpio"; - }; - - config { - pins = "gpio38"; - bias-pull-up; /* pull up */ - drive-strength = <16>; /* 16 MA */ - }; - }; - - sdc2_cd_off: sdc2_cd_off { - mux { - pins = "gpio38"; - function = "gpio"; - }; - - config { - pins = "gpio38"; - bias-pull-up; /* pull up */ - drive-strength = <2>; /* 2 MA */ - }; - }; - - blsp1_uart1_default: blsp1_uart1_default { - mux { - pins = "gpio41", "gpio42", "gpio43", "gpio44"; - function = "blsp_uart2"; - }; - - config { - pins = "gpio41", "gpio42", "gpio43", "gpio44"; - drive-strength = <16>; - bias-disable; - }; - }; - - blsp1_uart1_sleep: blsp1_uart1_sleep { - mux { - pins = "gpio41", "gpio42", "gpio43", "gpio44"; - function = "gpio"; - }; - - config { - pins = "gpio41", "gpio42", "gpio43", "gpio44"; - drive-strength = <2>; - bias-disable; - }; - }; - - hdmi_hpd_active: hdmi_hpd_active { - mux { - pins = "gpio34"; - function = "hdmi_hot"; - }; - - config { - pins = "gpio34"; - bias-pull-down; - drive-strength = <16>; - }; - }; - - hdmi_hpd_suspend: hdmi_hpd_suspend { - mux { - pins = "gpio34"; - function = "hdmi_hot"; - }; - - config { - pins = "gpio34"; - bias-pull-down; - drive-strength = <2>; - }; - }; - - hdmi_ddc_active: hdmi_ddc_active { - mux { - pins = "gpio32", "gpio33"; - function = "hdmi_ddc"; - }; - - config { - pins = "gpio32", "gpio33"; - drive-strength = <2>; - bias-pull-up; - }; - }; - - hdmi_ddc_suspend: hdmi_ddc_suspend { - mux { - pins = "gpio32", "gpio33"; - function = "hdmi_ddc"; - }; - - config { - pins = "gpio32", "gpio33"; - drive-strength = <2>; - bias-pull-down; - }; - }; -}; diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c-pmic-pins.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c-pmic-pins.dtsi deleted file mode 100644 index 31a3e3311ad5..000000000000 --- a/arch/arm64/boot/dts/qcom/apq8096-db820c-pmic-pins.dtsi +++ /dev/null @@ -1,92 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 - -#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> -&pm8994_gpios { - - pinctrl-names = "default"; - pinctrl-0 = <&ls_exp_gpio_f &bt_en_gpios>; - - ls_exp_gpio_f: pm8994_gpio5 { - pinconf { - pins = "gpio5"; - output-low; - power-source = <2>; // PM8994_GPIO_S4, 1.8V - }; - }; - - bt_en_gpios: bt_en_gpios { - pinconf { - pins = "gpio19"; - function = PMIC_GPIO_FUNC_NORMAL; - output-low; - power-source = <PM8994_GPIO_S4>; // 1.8V - qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; - bias-pull-down; - }; - }; - - wlan_en_gpios: wlan_en_gpios { - pinconf { - pins = "gpio8"; - function = PMIC_GPIO_FUNC_NORMAL; - output-low; - power-source = <PM8994_GPIO_S4>; // 1.8V - qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; - bias-pull-down; - }; - }; - - audio_mclk: clk_div1 { - pinconf { - pins = "gpio15"; - function = "func1"; - power-source = <PM8994_GPIO_S4>; // 1.8V - }; - }; - - volume_up_gpio: pm8996_gpio2 { - pinconf { - pins = "gpio2"; - function = "normal"; - input-enable; - drive-push-pull; - bias-pull-up; - qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; - power-source = <PM8994_GPIO_S4>; // 1.8V - }; - }; - - divclk4_pin_a: divclk4 { - pinconf { - pins = "gpio18"; - function = PMIC_GPIO_FUNC_FUNC2; - - bias-disable; - power-source = <PM8994_GPIO_S4>; - }; - }; - - usb3_vbus_det_gpio: pm8996_gpio22 { - pinconf { - pins = "gpio22"; - function = PMIC_GPIO_FUNC_NORMAL; - input-enable; - bias-pull-down; - qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; - power-source = <PM8994_GPIO_S4>; // 1.8V - }; - }; -}; - -&pmi8994_gpios { - usb2_vbus_det_gpio: pmi8996_gpio6 { - pinconf { - pins = "gpio6"; - function = PMIC_GPIO_FUNC_NORMAL; - input-enable; - bias-pull-down; - qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; - power-source = <PM8994_GPIO_S4>; // 1.8V - }; - }; -}; diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi index 04ad2fb22b9a..fff6115f2670 100644 --- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi +++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi @@ -6,10 +6,9 @@ #include "msm8996.dtsi" #include "pm8994.dtsi" #include "pmi8994.dtsi" -#include "apq8096-db820c-pins.dtsi" -#include "apq8096-db820c-pmic-pins.dtsi" #include <dt-bindings/input/input.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> #include <dt-bindings/sound/qcom,q6afe.h> #include <dt-bindings/sound/qcom,q6asm.h> @@ -78,609 +77,837 @@ }; }; - soc { - serial@7570000 { - label = "BT-UART"; - status = "okay"; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&blsp1_uart1_default>; - pinctrl-1 = <&blsp1_uart1_sleep>; - - bluetooth { - compatible = "qcom,qca6174-bt"; + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + autorepeat; - /* bt_disable_n gpio */ - enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&volume_up_gpio>; - clocks = <&divclk4>; - }; + button@0 { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + gpios = <&pm8994_gpios 2 GPIO_ACTIVE_LOW>; }; + }; - serial@75b0000 { - label = "LS-UART1"; - status = "okay"; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&blsp2_uart1_2pins_default>; - pinctrl-1 = <&blsp2_uart1_2pins_sleep>; - }; - - serial@75b1000 { - label = "LS-UART0"; - status = "disabled"; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&blsp2_uart2_4pins_default>; - pinctrl-1 = <&blsp2_uart2_4pins_sleep>; - }; - - i2c@7577000 { - /* On Low speed expansion */ - label = "LS-I2C0"; - status = "okay"; - }; - - i2c@75b6000 { - /* On Low speed expansion */ - label = "LS-I2C1"; - status = "okay"; - }; - - spi@7575000 { - /* On Low speed expansion */ - label = "LS-SPI0"; - status = "okay"; - }; - - i2c@75b5000 { - /* On High speed expansion */ - label = "HS-I2C2"; - status = "okay"; - }; - - spi@75ba000{ - /* On High speed expansion */ - label = "HS-SPI1"; - status = "okay"; - }; - - sdhci@74a4900 { - /* External SD card */ - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; - pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; - cd-gpios = <&msmgpio 38 0x1>; - vmmc-supply = <&pm8994_l21>; - vqmmc-supply = <&pm8994_l13>; - status = "okay"; - }; - - phy@627000 { - status = "okay"; - }; - - ufshc@624000 { - status = "okay"; - }; - - pinctrl@1010000 { - gpio-line-names = - "[SPI0_DOUT]", /* GPIO_0, BLSP1_SPI_MOSI, LSEC pin 14 */ - "[SPI0_DIN]", /* GPIO_1, BLSP1_SPI_MISO, LSEC pin 10 */ - "[SPI0_CS]", /* GPIO_2, BLSP1_SPI_CS_N, LSEC pin 12 */ - "[SPI0_SCLK]", /* GPIO_3, BLSP1_SPI_CLK, LSEC pin 8 */ - "[UART1_TxD]", /* GPIO_4, BLSP8_UART_TX, LSEC pin 11 */ - "[UART1_RxD]", /* GPIO_5, BLSP8_UART_RX, LSEC pin 13 */ - "[I2C1_SDA]", /* GPIO_6, BLSP8_I2C_SDA, LSEC pin 21 */ - "[I2C1_SCL]", /* GPIO_7, BLSP8_I2C_SCL, LSEC pin 19 */ - "GPIO-H", /* GPIO_8, LCD0_RESET_N, LSEC pin 30 */ - "TP93", /* GPIO_9 */ - "GPIO-G", /* GPIO_10, MDP_VSYNC_P, LSEC pin 29 */ - "[MDP_VSYNC_S]", /* GPIO_11, S HSEC pin 55 */ - "NC", /* GPIO_12 */ - "[CSI0_MCLK]", /* GPIO_13, CAM_MCLK0, P HSEC pin 15 */ - "[CAM_MCLK1]", /* GPIO_14, J14 pin 11 */ - "[CSI1_MCLK]", /* GPIO_15, CAM_MCLK2, P HSEC pin 17 */ - "TP99", /* GPIO_16 */ - "[I2C2_SDA]", /* GPIO_17, CCI_I2C_SDA0, P HSEC pin 34 */ - "[I2C2_SCL]", /* GPIO_18, CCI_I2C_SCL0, P HSEC pin 32 */ - "[CCI_I2C_SDA1]", /* GPIO_19, S HSEC pin 38 */ - "[CCI_I2C_SCL1]", /* GPIO_20, S HSEC pin 36 */ - "FLASH_STROBE_EN", /* GPIO_21, S HSEC pin 5 */ - "FLASH_STROBE_TRIG", /* GPIO_22, S HSEC pin 1 */ - "GPIO-K", /* GPIO_23, CAM2_RST_N, LSEC pin 33 */ - "GPIO-D", /* GPIO_24, LSEC pin 26 */ - "GPIO-I", /* GPIO_25, CAM0_RST_N, LSEC pin 31 */ - "GPIO-J", /* GPIO_26, CAM0_STANDBY_N, LSEC pin 32 */ - "BLSP6_I2C_SDA", /* GPIO_27 */ - "BLSP6_I2C_SCL", /* GPIO_28 */ - "GPIO-B", /* GPIO_29, TS0_RESET_N, LSEC pin 24 */ - "GPIO30", /* GPIO_30, S HSEC pin 4 */ - "HDMI_CEC", /* GPIO_31 */ - "HDMI_DDC_CLOCK", /* GPIO_32 */ - "HDMI_DDC_DATA", /* GPIO_33 */ - "HDMI_HOT_PLUG_DETECT", /* GPIO_34 */ - "PCIE0_RST_N", /* GPIO_35 */ - "PCIE0_CLKREQ_N", /* GPIO_36 */ - "PCIE0_WAKE", /* GPIO_37 */ - "SD_CARD_DET_N", /* GPIO_38 */ - "TSIF1_SYNC", /* GPIO_39, S HSEC pin 48 */ - "W_DISABLE_N", /* GPIO_40 */ - "[BLSP9_UART_TX]", /* GPIO_41 */ - "[BLSP9_UART_RX]", /* GPIO_42 */ - "[BLSP2_UART_CTS_N]", /* GPIO_43 */ - "[BLSP2_UART_RFR_N]", /* GPIO_44 */ - "[BLSP3_UART_TX]", /* GPIO_45 */ - "[BLSP3_UART_RX]", /* GPIO_46 */ - "[I2C0_SDA]", /* GPIO_47, LS_I2C0_SDA, LSEC pin 17 */ - "[I2C0_SCL]", /* GPIO_48, LS_I2C0_SCL, LSEC pin 15 */ - "[UART0_TxD]", /* GPIO_49, BLSP9_UART_TX, LSEC pin 5 */ - "[UART0_RxD]", /* GPIO_50, BLSP9_UART_RX, LSEC pin 7 */ - "[UART0_CTS]", /* GPIO_51, BLSP9_UART_CTS_N, LSEC pin 3 */ - "[UART0_RTS]", /* GPIO_52, BLSP9_UART_RFR_N, LSEC pin 9 */ - "[CODEC_INT1_N]", /* GPIO_53 */ - "[CODEC_INT2_N]", /* GPIO_54 */ - "[BLSP7_I2C_SDA]", /* GPIO_55 */ - "[BLSP7_I2C_SCL]", /* GPIO_56 */ - "MI2S_MCLK", /* GPIO_57, S HSEC pin 3 */ - "[PCM_CLK]", /* GPIO_58, QUA_MI2S_SCK, LSEC pin 18 */ - "[PCM_FS]", /* GPIO_59, QUA_MI2S_WS, LSEC pin 16 */ - "[PCM_DO]", /* GPIO_60, QUA_MI2S_DATA0, LSEC pin 20 */ - "[PCM_DI]", /* GPIO_61, QUA_MI2S_DATA1, LSEC pin 22 */ - "GPIO-E", /* GPIO_62, LSEC pin 27 */ - "TP87", /* GPIO_63 */ - "[CODEC_RST_N]", /* GPIO_64 */ - "[PCM1_CLK]", /* GPIO_65 */ - "[PCM1_SYNC]", /* GPIO_66 */ - "[PCM1_DIN]", /* GPIO_67 */ - "[PCM1_DOUT]", /* GPIO_68 */ - "AUDIO_REF_CLK", /* GPIO_69 */ - "SLIMBUS_CLK", /* GPIO_70 */ - "SLIMBUS_DATA0", /* GPIO_71 */ - "SLIMBUS_DATA1", /* GPIO_72 */ - "NC", /* GPIO_73 */ - "NC", /* GPIO_74 */ - "NC", /* GPIO_75 */ - "NC", /* GPIO_76 */ - "TP94", /* GPIO_77 */ - "NC", /* GPIO_78 */ - "TP95", /* GPIO_79 */ - "GPIO-A", /* GPIO_80, MEMS_RESET_N, LSEC pin 23 */ - "TP88", /* GPIO_81 */ - "TP89", /* GPIO_82 */ - "TP90", /* GPIO_83 */ - "TP91", /* GPIO_84 */ - "[SD_DAT0]", /* GPIO_85, BLSP12_SPI_MOSI, P HSEC pin 1 */ - "[SD_CMD]", /* GPIO_86, BLSP12_SPI_MISO, P HSEC pin 11 */ - "[SD_DAT3]", /* GPIO_87, BLSP12_SPI_CS_N, P HSEC pin 7 */ - "[SD_SCLK]", /* GPIO_88, BLSP12_SPI_CLK, P HSEC pin 9 */ - "TSIF1_CLK", /* GPIO_89, S HSEC pin 42 */ - "TSIF1_EN", /* GPIO_90, S HSEC pin 46 */ - "TSIF1_DATA", /* GPIO_91, S HSEC pin 44 */ - "NC", /* GPIO_92 */ - "TSIF2_CLK", /* GPIO_93, S HSEC pin 52 */ - "TSIF2_EN", /* GPIO_94, S HSEC pin 56 */ - "TSIF2_DATA", /* GPIO_95, S HSEC pin 54 */ - "TSIF2_SYNC", /* GPIO_96, S HSEC pin 58 */ - "NC", /* GPIO_97 */ - "CAM1_STANDBY_N", /* GPIO_98 */ - "NC", /* GPIO_99 */ - "NC", /* GPIO_100 */ - "[LCD1_RESET_N]", /* GPIO_101, S HSEC pin 51 */ - "BOOT_CONFIG1", /* GPIO_102 */ - "USB_HUB_RESET", /* GPIO_103 */ - "CAM1_RST_N", /* GPIO_104 */ - "NC", /* GPIO_105 */ - "NC", /* GPIO_106 */ - "NC", /* GPIO_107 */ - "NC", /* GPIO_108 */ - "NC", /* GPIO_109 */ - "NC", /* GPIO_110 */ - "NC", /* GPIO_111 */ - "NC", /* GPIO_112 */ - "PMI8994_BUA", /* GPIO_113 */ - "PCIE2_RST_N", /* GPIO_114 */ - "PCIE2_CLKREQ_N", /* GPIO_115 */ - "PCIE2_WAKE", /* GPIO_116 */ - "SSC_IRQ_0", /* GPIO_117 */ - "SSC_IRQ_1", /* GPIO_118 */ - "SSC_IRQ_2", /* GPIO_119 */ - "NC", /* GPIO_120 */ - "GPIO121", /* GPIO_121, S HSEC pin 2 */ - "NC", /* GPIO_122 */ - "SSC_IRQ_6", /* GPIO_123 */ - "SSC_IRQ_7", /* GPIO_124 */ - "GPIO-C", /* GPIO_125, TS_INT0, LSEC pin 25 */ - "BOOT_CONFIG5", /* GPIO_126 */ - "NC", /* GPIO_127 */ - "NC", /* GPIO_128 */ - "BOOT_CONFIG7", /* GPIO_129 */ - "PCIE1_RST_N", /* GPIO_130 */ - "PCIE1_CLKREQ_N", /* GPIO_131 */ - "PCIE1_WAKE", /* GPIO_132 */ - "GPIO-L", /* GPIO_133, CAM2_STANDBY_N, LSEC pin 34 */ - "NC", /* GPIO_134 */ - "NC", /* GPIO_135 */ - "BOOT_CONFIG8", /* GPIO_136 */ - "NC", /* GPIO_137 */ - "NC", /* GPIO_138 */ - "GPS_SSBI2", /* GPIO_139 */ - "GPS_SSBI1", /* GPIO_140 */ - "NC", /* GPIO_141 */ - "NC", /* GPIO_142 */ - "NC", /* GPIO_143 */ - "BOOT_CONFIG6", /* GPIO_144 */ - "NC", /* GPIO_145 */ - "NC", /* GPIO_146 */ - "NC", /* GPIO_147 */ - "NC", /* GPIO_148 */ - "NC"; /* GPIO_149 */ - }; - - qcom,spmi@400f000 { - pmic@0 { - gpios@c000 { - gpio-line-names = - "NC", - "KEY_VOLP_N", - "NC", - "BL1_PWM", - "GPIO-F", /* BL0_PWM, LSEC pin 28 */ - "BL1_EN", - "NC", - "WLAN_EN", - "NC", - "NC", - "NC", - "NC", - "NC", - "NC", - "DIVCLK1", - "DIVCLK2", - "DIVCLK3", - "DIVCLK4", - "BT_EN", - "PMIC_SLB", - "PMIC_BUA", - "USB_VBUS_DET"; - }; - - mpps@a000 { - gpio-line-names = - "VDDPX_BIAS", - "WIFI_LED", - "NC", - "BT_LED", - "PM_MPP05", - "PM_MPP06", - "PM_MPP07", - "NC"; - }; - }; + usb2_id: usb2-id { + compatible = "linux,extcon-usb-gpio"; + id-gpio = <&pmi8994_gpios 6 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb2_vbus_det_gpio>; + }; - pmic@2 { - gpios@c000 { - gpio-line-names = - "NC", - "SPKR_AMP_EN1", - "SPKR_AMP_EN2", - "TP61", - "NC", - "USB2_VBUS_DET", - "NC", - "NC", - "NC", - "NC"; - }; - }; - }; + usb3_id: usb3-id { + compatible = "linux,extcon-usb-gpio"; + id-gpio = <&pm8994_gpios 22 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb3_vbus_det_gpio>; + }; - phy@34000 { - status = "okay"; - }; + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-always-on; + regulator-boot-on; + + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + }; + + vreg_s8a_l3a_input: vreg-s8a-l3a-input { + compatible = "regulator-fixed"; + regulator-name = "vreg_s8a_l3a_input"; + regulator-always-on; + regulator-boot-on; + + regulator-min-microvolt = <0>; + regulator-max-microvolt = <0>; + }; + + wlan_en: wlan-en-1-8v { + pinctrl-names = "default"; + pinctrl-0 = <&wlan_en_gpios>; + compatible = "regulator-fixed"; + regulator-name = "wlan-en-regulator"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + gpio = <&pm8994_gpios 8 0>; + + /* WLAN card specific delay */ + startup-delay-us = <70000>; + enable-active-high; + }; +}; + +&blsp1_i2c2 { + /* On Low speed expansion */ + label = "LS-I2C0"; + status = "okay"; +}; + +&blsp1_spi0 { + /* On Low speed expansion */ + label = "LS-SPI0"; + status = "okay"; +}; + +&blsp1_uart1 { + label = "BT-UART"; + status = "okay"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp1_uart1_default>; + pinctrl-1 = <&blsp1_uart1_sleep>; + + bluetooth { + compatible = "qcom,qca6174-bt"; + + /* bt_disable_n gpio */ + enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>; + + clocks = <&divclk4>; + }; +}; + +&blsp2_i2c0 { + /* On High speed expansion */ + label = "HS-I2C2"; + status = "okay"; +}; + +&blsp2_i2c1 { + /* On Low speed expansion */ + label = "LS-I2C1"; + status = "okay"; +}; + +&blsp2_spi5 { + /* On High speed expansion */ + label = "HS-SPI1"; + status = "okay"; +}; + +&blsp2_uart1 { + label = "LS-UART1"; + status = "okay"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp2_uart1_2pins_default>; + pinctrl-1 = <&blsp2_uart1_2pins_sleep>; +}; + +&blsp2_uart2 { + label = "LS-UART0"; + status = "disabled"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp2_uart2_4pins_default>; + pinctrl-1 = <&blsp2_uart2_4pins_sleep>; +}; + +&camss { + vdda-supply = <&vreg_l2a_1p25>; +}; + +&hdmi { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&hdmi_hpd_active &hdmi_ddc_active>; + pinctrl-1 = <&hdmi_hpd_suspend &hdmi_ddc_suspend>; + + core-vdda-supply = <&vreg_l12a_1p8>; + core-vcc-supply = <&vreg_s4a_1p8>; +}; + +&hdmi_phy { + status = "okay"; + + vddio-supply = <&vreg_l12a_1p8>; + vcca-supply = <&vreg_l28a_0p925>; + #phy-cells = <0>; +}; + +&hsusb_phy1 { + status = "okay"; + + vdda-pll-supply = <&vreg_l12a_1p8>; + vdda-phy-dpdm-supply = <&vreg_l24a_3p075>; +}; + +&hsusb_phy2 { + status = "okay"; + + vdda-pll-supply = <&vreg_l12a_1p8>; + vdda-phy-dpdm-supply = <&vreg_l24a_3p075>; +}; + +&mdp { + status = "okay"; +}; + +&mdss { + status = "okay"; +}; - phy@7410000 { - status = "okay"; +&msmgpio { + gpio-line-names = + "[SPI0_DOUT]", /* GPIO_0, BLSP1_SPI_MOSI, LSEC pin 14 */ + "[SPI0_DIN]", /* GPIO_1, BLSP1_SPI_MISO, LSEC pin 10 */ + "[SPI0_CS]", /* GPIO_2, BLSP1_SPI_CS_N, LSEC pin 12 */ + "[SPI0_SCLK]", /* GPIO_3, BLSP1_SPI_CLK, LSEC pin 8 */ + "[UART1_TxD]", /* GPIO_4, BLSP8_UART_TX, LSEC pin 11 */ + "[UART1_RxD]", /* GPIO_5, BLSP8_UART_RX, LSEC pin 13 */ + "[I2C1_SDA]", /* GPIO_6, BLSP8_I2C_SDA, LSEC pin 21 */ + "[I2C1_SCL]", /* GPIO_7, BLSP8_I2C_SCL, LSEC pin 19 */ + "GPIO-H", /* GPIO_8, LCD0_RESET_N, LSEC pin 30 */ + "TP93", /* GPIO_9 */ + "GPIO-G", /* GPIO_10, MDP_VSYNC_P, LSEC pin 29 */ + "[MDP_VSYNC_S]", /* GPIO_11, S HSEC pin 55 */ + "NC", /* GPIO_12 */ + "[CSI0_MCLK]", /* GPIO_13, CAM_MCLK0, P HSEC pin 15 */ + "[CAM_MCLK1]", /* GPIO_14, J14 pin 11 */ + "[CSI1_MCLK]", /* GPIO_15, CAM_MCLK2, P HSEC pin 17 */ + "TP99", /* GPIO_16 */ + "[I2C2_SDA]", /* GPIO_17, CCI_I2C_SDA0, P HSEC pin 34 */ + "[I2C2_SCL]", /* GPIO_18, CCI_I2C_SCL0, P HSEC pin 32 */ + "[CCI_I2C_SDA1]", /* GPIO_19, S HSEC pin 38 */ + "[CCI_I2C_SCL1]", /* GPIO_20, S HSEC pin 36 */ + "FLASH_STROBE_EN", /* GPIO_21, S HSEC pin 5 */ + "FLASH_STROBE_TRIG", /* GPIO_22, S HSEC pin 1 */ + "GPIO-K", /* GPIO_23, CAM2_RST_N, LSEC pin 33 */ + "GPIO-D", /* GPIO_24, LSEC pin 26 */ + "GPIO-I", /* GPIO_25, CAM0_RST_N, LSEC pin 31 */ + "GPIO-J", /* GPIO_26, CAM0_STANDBY_N, LSEC pin 32 */ + "BLSP6_I2C_SDA", /* GPIO_27 */ + "BLSP6_I2C_SCL", /* GPIO_28 */ + "GPIO-B", /* GPIO_29, TS0_RESET_N, LSEC pin 24 */ + "GPIO30", /* GPIO_30, S HSEC pin 4 */ + "HDMI_CEC", /* GPIO_31 */ + "HDMI_DDC_CLOCK", /* GPIO_32 */ + "HDMI_DDC_DATA", /* GPIO_33 */ + "HDMI_HOT_PLUG_DETECT", /* GPIO_34 */ + "PCIE0_RST_N", /* GPIO_35 */ + "PCIE0_CLKREQ_N", /* GPIO_36 */ + "PCIE0_WAKE", /* GPIO_37 */ + "SD_CARD_DET_N", /* GPIO_38 */ + "TSIF1_SYNC", /* GPIO_39, S HSEC pin 48 */ + "W_DISABLE_N", /* GPIO_40 */ + "[BLSP9_UART_TX]", /* GPIO_41 */ + "[BLSP9_UART_RX]", /* GPIO_42 */ + "[BLSP2_UART_CTS_N]", /* GPIO_43 */ + "[BLSP2_UART_RFR_N]", /* GPIO_44 */ + "[BLSP3_UART_TX]", /* GPIO_45 */ + "[BLSP3_UART_RX]", /* GPIO_46 */ + "[I2C0_SDA]", /* GPIO_47, LS_I2C0_SDA, LSEC pin 17 */ + "[I2C0_SCL]", /* GPIO_48, LS_I2C0_SCL, LSEC pin 15 */ + "[UART0_TxD]", /* GPIO_49, BLSP9_UART_TX, LSEC pin 5 */ + "[UART0_RxD]", /* GPIO_50, BLSP9_UART_RX, LSEC pin 7 */ + "[UART0_CTS]", /* GPIO_51, BLSP9_UART_CTS_N, LSEC pin 3 */ + "[UART0_RTS]", /* GPIO_52, BLSP9_UART_RFR_N, LSEC pin 9 */ + "[CODEC_INT1_N]", /* GPIO_53 */ + "[CODEC_INT2_N]", /* GPIO_54 */ + "[BLSP7_I2C_SDA]", /* GPIO_55 */ + "[BLSP7_I2C_SCL]", /* GPIO_56 */ + "MI2S_MCLK", /* GPIO_57, S HSEC pin 3 */ + "[PCM_CLK]", /* GPIO_58, QUA_MI2S_SCK, LSEC pin 18 */ + "[PCM_FS]", /* GPIO_59, QUA_MI2S_WS, LSEC pin 16 */ + "[PCM_DO]", /* GPIO_60, QUA_MI2S_DATA0, LSEC pin 20 */ + "[PCM_DI]", /* GPIO_61, QUA_MI2S_DATA1, LSEC pin 22 */ + "GPIO-E", /* GPIO_62, LSEC pin 27 */ + "TP87", /* GPIO_63 */ + "[CODEC_RST_N]", /* GPIO_64 */ + "[PCM1_CLK]", /* GPIO_65 */ + "[PCM1_SYNC]", /* GPIO_66 */ + "[PCM1_DIN]", /* GPIO_67 */ + "[PCM1_DOUT]", /* GPIO_68 */ + "AUDIO_REF_CLK", /* GPIO_69 */ + "SLIMBUS_CLK", /* GPIO_70 */ + "SLIMBUS_DATA0", /* GPIO_71 */ + "SLIMBUS_DATA1", /* GPIO_72 */ + "NC", /* GPIO_73 */ + "NC", /* GPIO_74 */ + "NC", /* GPIO_75 */ + "NC", /* GPIO_76 */ + "TP94", /* GPIO_77 */ + "NC", /* GPIO_78 */ + "TP95", /* GPIO_79 */ + "GPIO-A", /* GPIO_80, MEMS_RESET_N, LSEC pin 23 */ + "TP88", /* GPIO_81 */ + "TP89", /* GPIO_82 */ + "TP90", /* GPIO_83 */ + "TP91", /* GPIO_84 */ + "[SD_DAT0]", /* GPIO_85, BLSP12_SPI_MOSI, P HSEC pin 1 */ + "[SD_CMD]", /* GPIO_86, BLSP12_SPI_MISO, P HSEC pin 11 */ + "[SD_DAT3]", /* GPIO_87, BLSP12_SPI_CS_N, P HSEC pin 7 */ + "[SD_SCLK]", /* GPIO_88, BLSP12_SPI_CLK, P HSEC pin 9 */ + "TSIF1_CLK", /* GPIO_89, S HSEC pin 42 */ + "TSIF1_EN", /* GPIO_90, S HSEC pin 46 */ + "TSIF1_DATA", /* GPIO_91, S HSEC pin 44 */ + "NC", /* GPIO_92 */ + "TSIF2_CLK", /* GPIO_93, S HSEC pin 52 */ + "TSIF2_EN", /* GPIO_94, S HSEC pin 56 */ + "TSIF2_DATA", /* GPIO_95, S HSEC pin 54 */ + "TSIF2_SYNC", /* GPIO_96, S HSEC pin 58 */ + "NC", /* GPIO_97 */ + "CAM1_STANDBY_N", /* GPIO_98 */ + "NC", /* GPIO_99 */ + "NC", /* GPIO_100 */ + "[LCD1_RESET_N]", /* GPIO_101, S HSEC pin 51 */ + "BOOT_CONFIG1", /* GPIO_102 */ + "USB_HUB_RESET", /* GPIO_103 */ + "CAM1_RST_N", /* GPIO_104 */ + "NC", /* GPIO_105 */ + "NC", /* GPIO_106 */ + "NC", /* GPIO_107 */ + "NC", /* GPIO_108 */ + "NC", /* GPIO_109 */ + "NC", /* GPIO_110 */ + "NC", /* GPIO_111 */ + "NC", /* GPIO_112 */ + "PMI8994_BUA", /* GPIO_113 */ + "PCIE2_RST_N", /* GPIO_114 */ + "PCIE2_CLKREQ_N", /* GPIO_115 */ + "PCIE2_WAKE", /* GPIO_116 */ + "SSC_IRQ_0", /* GPIO_117 */ + "SSC_IRQ_1", /* GPIO_118 */ + "SSC_IRQ_2", /* GPIO_119 */ + "NC", /* GPIO_120 */ + "GPIO121", /* GPIO_121, S HSEC pin 2 */ + "NC", /* GPIO_122 */ + "SSC_IRQ_6", /* GPIO_123 */ + "SSC_IRQ_7", /* GPIO_124 */ + "GPIO-C", /* GPIO_125, TS_INT0, LSEC pin 25 */ + "BOOT_CONFIG5", /* GPIO_126 */ + "NC", /* GPIO_127 */ + "NC", /* GPIO_128 */ + "BOOT_CONFIG7", /* GPIO_129 */ + "PCIE1_RST_N", /* GPIO_130 */ + "PCIE1_CLKREQ_N", /* GPIO_131 */ + "PCIE1_WAKE", /* GPIO_132 */ + "GPIO-L", /* GPIO_133, CAM2_STANDBY_N, LSEC pin 34 */ + "NC", /* GPIO_134 */ + "NC", /* GPIO_135 */ + "BOOT_CONFIG8", /* GPIO_136 */ + "NC", /* GPIO_137 */ + "NC", /* GPIO_138 */ + "GPS_SSBI2", /* GPIO_139 */ + "GPS_SSBI1", /* GPIO_140 */ + "NC", /* GPIO_141 */ + "NC", /* GPIO_142 */ + "NC", /* GPIO_143 */ + "BOOT_CONFIG6", /* GPIO_144 */ + "NC", /* GPIO_145 */ + "NC", /* GPIO_146 */ + "NC", /* GPIO_147 */ + "NC", /* GPIO_148 */ + "NC"; /* GPIO_149 */ + + sdc2_cd_on: sdc2_cd_on { + mux { + pins = "gpio38"; + function = "gpio"; }; - phy@7411000 { - status = "okay"; + config { + pins = "gpio38"; + bias-pull-up; /* pull up */ + drive-strength = <16>; /* 16 MA */ }; + }; - phy@7412000 { - status = "okay"; + sdc2_cd_off: sdc2_cd_off { + mux { + pins = "gpio38"; + function = "gpio"; }; - usb@6af8800 { - status = "okay"; - extcon = <&usb3_id>; + config { + pins = "gpio38"; + bias-pull-up; /* pull up */ + drive-strength = <2>; /* 2 MA */ + }; + }; - dwc3@6a00000 { - extcon = <&usb3_id>; - dr_mode = "otg"; - }; + blsp1_uart1_default: blsp1_uart1_default { + mux { + pins = "gpio41", "gpio42", "gpio43", "gpio44"; + function = "blsp_uart2"; }; - usb3_id: usb3-id { - compatible = "linux,extcon-usb-gpio"; - id-gpio = <&pm8994_gpios 22 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&usb3_vbus_det_gpio>; + config { + pins = "gpio41", "gpio42", "gpio43", "gpio44"; + drive-strength = <16>; + bias-disable; }; + }; - usb@76f8800 { - status = "okay"; - extcon = <&usb2_id>; + blsp1_uart1_sleep: blsp1_uart1_sleep { + mux { + pins = "gpio41", "gpio42", "gpio43", "gpio44"; + function = "gpio"; + }; - dwc3@7600000 { - extcon = <&usb2_id>; - dr_mode = "otg"; - maximum-speed = "high-speed"; - }; + config { + pins = "gpio41", "gpio42", "gpio43", "gpio44"; + drive-strength = <2>; + bias-disable; }; + }; - usb2_id: usb2-id { - compatible = "linux,extcon-usb-gpio"; - id-gpio = <&pmi8994_gpios 6 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&usb2_vbus_det_gpio>; + hdmi_hpd_active: hdmi_hpd_active { + mux { + pins = "gpio34"; + function = "hdmi_hot"; }; - wlan_en: wlan-en-1-8v { - pinctrl-names = "default"; - pinctrl-0 = <&wlan_en_gpios>; - compatible = "regulator-fixed"; - regulator-name = "wlan-en-regulator"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; + config { + pins = "gpio34"; + bias-pull-down; + drive-strength = <16>; + }; + }; - gpio = <&pm8994_gpios 8 0>; + hdmi_hpd_suspend: hdmi_hpd_suspend { + mux { + pins = "gpio34"; + function = "hdmi_hot"; + }; - /* WLAN card specific delay */ - startup-delay-us = <70000>; - enable-active-high; + config { + pins = "gpio34"; + bias-pull-down; + drive-strength = <2>; }; + }; - agnoc@0 { - pcie@600000 { - status = "okay"; - perst-gpio = <&msmgpio 35 GPIO_ACTIVE_LOW>; - vddpe-3v3-supply = <&wlan_en>; - }; + hdmi_ddc_active: hdmi_ddc_active { + mux { + pins = "gpio32", "gpio33"; + function = "hdmi_ddc"; + }; - pcie@608000 { - status = "okay"; - perst-gpio = <&msmgpio 130 GPIO_ACTIVE_LOW>; - }; + config { + pins = "gpio32", "gpio33"; + drive-strength = <2>; + bias-pull-up; + }; + }; - pcie@610000 { - status = "okay"; - perst-gpio = <&msmgpio 114 GPIO_ACTIVE_LOW>; - }; + hdmi_ddc_suspend: hdmi_ddc_suspend { + mux { + pins = "gpio32", "gpio33"; + function = "hdmi_ddc"; }; - slim_msm: slim@91c0000 { - ngd@1 { - wcd9335: codec@1{ - clock-names = "mclk", "slimbus"; - clocks = <&div1_mclk>, - <&rpmcc RPM_SMD_BB_CLK1>; - }; - }; + config { + pins = "gpio32", "gpio33"; + drive-strength = <2>; + bias-pull-down; }; + }; +}; - mdss@900000 { - status = "okay"; +&pcie0 { + status = "okay"; + perst-gpio = <&msmgpio 35 GPIO_ACTIVE_LOW>; + vddpe-3v3-supply = <&wlan_en>; + vdda-supply = <&vreg_l28a_0p925>; +}; - mdp@901000 { - status = "okay"; - }; +&pcie1 { + status = "okay"; + perst-gpio = <&msmgpio 130 GPIO_ACTIVE_LOW>; + vdda-supply = <&vreg_l28a_0p925>; +}; - hdmi-phy@9a0600 { - status = "okay"; +&pcie2 { + status = "okay"; + perst-gpio = <&msmgpio 114 GPIO_ACTIVE_LOW>; + vdda-supply = <&vreg_l28a_0p925>; +}; - vddio-supply = <&pm8994_l12>; - vcca-supply = <&pm8994_l28>; - #phy-cells = <0>; - }; +&pcie_phy { + status = "okay"; - hdmi-tx@9a0000 { - status = "okay"; + vdda-phy-supply = <&vreg_l28a_0p925>; + vdda-pll-supply = <&vreg_l12a_1p8>; +}; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&hdmi_hpd_active &hdmi_ddc_active>; - pinctrl-1 = <&hdmi_hpd_suspend &hdmi_ddc_suspend>; +&pm8994_gpios { + gpio-line-names = + "NC", + "KEY_VOLP_N", + "NC", + "BL1_PWM", + "GPIO-F", /* BL0_PWM, LSEC pin 28 */ + "BL1_EN", + "NC", + "WLAN_EN", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "DIVCLK1", + "DIVCLK2", + "DIVCLK3", + "DIVCLK4", + "BT_EN", + "PMIC_SLB", + "PMIC_BUA", + "USB_VBUS_DET"; + + pinctrl-names = "default"; + pinctrl-0 = <&ls_exp_gpio_f &bt_en_gpios>; + + ls_exp_gpio_f: pm8994_gpio5 { + pinconf { + pins = "gpio5"; + output-low; + power-source = <2>; // PM8994_GPIO_S4, 1.8V + }; + }; - core-vdda-supply = <&pm8994_l12>; - core-vcc-supply = <&pm8994_s4>; - }; + bt_en_gpios: bt_en_gpios { + pinconf { + pins = "gpio19"; + function = PMIC_GPIO_FUNC_NORMAL; + output-low; + power-source = <PM8994_GPIO_S4>; // 1.8V + qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; + bias-pull-down; }; }; + wlan_en_gpios: wlan_en_gpios { + pinconf { + pins = "gpio8"; + function = PMIC_GPIO_FUNC_NORMAL; + output-low; + power-source = <PM8994_GPIO_S4>; // 1.8V + qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; + bias-pull-down; + }; + }; - gpio_keys { - compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - autorepeat; + audio_mclk: clk_div1 { + pinconf { + pins = "gpio15"; + function = "func1"; + power-source = <PM8994_GPIO_S4>; // 1.8V + }; + }; - pinctrl-names = "default"; - pinctrl-0 = <&volume_up_gpio>; + volume_up_gpio: pm8996_gpio2 { + pinconf { + pins = "gpio2"; + function = "normal"; + input-enable; + drive-push-pull; + bias-pull-up; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; + power-source = <PM8994_GPIO_S4>; // 1.8V + }; + }; - button@0 { - label = "Volume Up"; - linux,code = <KEY_VOLUMEUP>; - gpios = <&pm8994_gpios 2 GPIO_ACTIVE_LOW>; + divclk4_pin_a: divclk4 { + pinconf { + pins = "gpio18"; + function = PMIC_GPIO_FUNC_FUNC2; + + bias-disable; + power-source = <PM8994_GPIO_S4>; }; }; - rpm-glink { - rpm_requests { - pm8994-regulators { - vdd_l1-supply = <&pm8994_s3>; - vdd_l2_l26_l28-supply = <&pm8994_s3>; - vdd_l3_l11-supply = <&pm8994_s3>; - vdd_l4_l27_l31-supply = <&pm8994_s3>; - vdd_l5_l7-supply = <&pm8994_s5>; - vdd_l14_l15-supply = <&pm8994_s5>; - vdd_l20_l21-supply = <&pm8994_s5>; - vdd_l25-supply = <&pm8994_s3>; - - s3 { - regulator-min-microvolt = <1300000>; - regulator-max-microvolt = <1300000>; - }; - - /** - * 1.8v required on LS expansion - * for mezzanine boards - */ - s4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - s5 { - regulator-min-microvolt = <2150000>; - regulator-max-microvolt = <2150000>; - }; - s7 { - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <800000>; - }; - - l1 { - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - }; - l2 { - regulator-min-microvolt = <1250000>; - regulator-max-microvolt = <1250000>; - }; - l3 { - regulator-min-microvolt = <850000>; - regulator-max-microvolt = <850000>; - }; - l4 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - }; - l6 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - l8 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - l9 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - l10 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - l11 { - regulator-min-microvolt = <1150000>; - regulator-max-microvolt = <1150000>; - }; - l12 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - l13 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - }; - l14 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - l15 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - l16 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - }; - l17 { - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <2500000>; - }; - l18 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2900000>; - }; - l19 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - }; - l20 { - regulator-min-microvolt = <2950000>; - regulator-max-microvolt = <2950000>; - regulator-allow-set-load; - }; - l21 { - regulator-min-microvolt = <2950000>; - regulator-max-microvolt = <2950000>; - }; - l22 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - l23 { - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - }; - l24 { - regulator-min-microvolt = <3075000>; - regulator-max-microvolt = <3075000>; - }; - l25 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-allow-set-load; - }; - l27 { - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - }; - l28 { - regulator-min-microvolt = <925000>; - regulator-max-microvolt = <925000>; - regulator-allow-set-load; - }; - l29 { - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - }; - l30 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - l32 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - }; + usb3_vbus_det_gpio: pm8996_gpio22 { + pinconf { + pins = "gpio22"; + function = PMIC_GPIO_FUNC_NORMAL; + input-enable; + bias-pull-down; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; + power-source = <PM8994_GPIO_S4>; // 1.8V }; }; }; -&spmi_bus { - pmic@0 { - pon@800 { - resin { - compatible = "qcom,pm8941-resin"; - interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; - debounce = <15625>; - bias-pull-up; - linux,code = <KEY_VOLUMEDOWN>; - }; +&pm8994_mpps { + gpio-line-names = + "VDDPX_BIAS", + "WIFI_LED", + "NC", + "BT_LED", + "PM_MPP05", + "PM_MPP06", + "PM_MPP07", + "NC"; +}; + +&pm8994_spmi_regulators { + qcom,saw-reg = <&saw3>; + s9 { + qcom,saw-slave; + }; + s10 { + qcom,saw-slave; + }; + s11 { + qcom,saw-leader; + regulator-always-on; + regulator-min-microvolt = <1230000>; + regulator-max-microvolt = <1230000>; + }; +}; + +&pmi8994_gpios { + gpio-line-names = + "NC", + "SPKR_AMP_EN1", + "SPKR_AMP_EN2", + "TP61", + "NC", + "USB2_VBUS_DET", + "NC", + "NC", + "NC", + "NC"; + + usb2_vbus_det_gpio: pmi8996_gpio6 { + pinconf { + pins = "gpio6"; + function = PMIC_GPIO_FUNC_NORMAL; + input-enable; + bias-pull-down; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; + power-source = <PM8994_GPIO_S4>; // 1.8V }; }; }; +&rpm_requests { + pm8994-regulators { + compatible = "qcom,rpm-pm8994-regulators"; + + vdd_s1-supply = <&vph_pwr>; + vdd_s2-supply = <&vph_pwr>; + vdd_s3-supply = <&vph_pwr>; + vdd_s4-supply = <&vph_pwr>; + vdd_s5-supply = <&vph_pwr>; + vdd_s6-supply = <&vph_pwr>; + vdd_s7-supply = <&vph_pwr>; + vdd_s8-supply = <&vph_pwr>; + vdd_s9-supply = <&vph_pwr>; + vdd_s10-supply = <&vph_pwr>; + vdd_s11-supply = <&vph_pwr>; + vdd_s12-supply = <&vph_pwr>; + vdd_l2_l26_l28-supply = <&vreg_s3a_1p3>; + vdd_l3_l11-supply = <&vreg_s8a_l3a_input>; + vdd_l4_l27_l31-supply = <&vreg_s3a_1p3>; + vdd_l5_l7-supply = <&vreg_s5a_2p15>; + vdd_l6_l12_l32-supply = <&vreg_s5a_2p15>; + vdd_l8_l16_l30-supply = <&vph_pwr>; + vdd_l14_l15-supply = <&vreg_s5a_2p15>; + vdd_l25-supply = <&vreg_s3a_1p3>; + vdd_lvs1_2-supply = <&vreg_s4a_1p8>; + + vreg_s3a_1p3: s3 { + regulator-name = "vreg_s3a_1p3"; + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + }; + + /** + * 1.8v required on LS expansion + * for mezzanine boards + */ + vreg_s4a_1p8: s4 { + regulator-name = "vreg_s4a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + vreg_s5a_2p15: s5 { + regulator-name = "vreg_s5a_2p15"; + regulator-min-microvolt = <2150000>; + regulator-max-microvolt = <2150000>; + }; + vreg_s7a_1p0: s7 { + regulator-name = "vreg_s7a_1p0"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + }; + + vreg_l1a_1p0: l1 { + regulator-name = "vreg_l1a_1p0"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + vreg_l2a_1p25: l2 { + regulator-name = "vreg_l2a_1p25"; + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1250000>; + }; + vreg_l3a_0p875: l3 { + regulator-name = "vreg_l3a_0p875"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + }; + vreg_l4a_1p225: l4 { + regulator-name = "vreg_l4a_1p225"; + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + vreg_l6a_1p2: l6 { + regulator-name = "vreg_l6a_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + vreg_l8a_1p8: l8 { + regulator-name = "vreg_l8a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l9a_1p8: l9 { + regulator-name = "vreg_l9a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l10a_1p8: l10 { + regulator-name = "vreg_l10a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l11a_1p15: l11 { + regulator-name = "vreg_l11a_1p15"; + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + }; + vreg_l12a_1p8: l12 { + regulator-name = "vreg_l12a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l13a_2p95: l13 { + regulator-name = "vreg_l13a_2p95"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + vreg_l14a_1p8: l14 { + regulator-name = "vreg_l14a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l15a_1p8: l15 { + regulator-name = "vreg_l15a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l16a_2p7: l16 { + regulator-name = "vreg_l16a_2p7"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + vreg_l17a_2p8: l17 { + regulator-name = "vreg_l17a_2p8"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + }; + vreg_l18a_2p85: l18 { + regulator-name = "vreg_l18a_2p85"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2900000>; + }; + vreg_l19a_2p8: l19 { + regulator-name = "vreg_l19a_2p8"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + vreg_l20a_2p95: l20 { + regulator-name = "vreg_l20a_2p95"; + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + }; + vreg_l21a_2p95: l21 { + regulator-name = "vreg_l21a_2p95"; + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + regulator-system-load = <200000>; + }; + vreg_l22a_3p0: l22 { + regulator-name = "vreg_l22a_3p0"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + vreg_l23a_2p8: l23 { + regulator-name = "vreg_l23a_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + vreg_l24a_3p075: l24 { + regulator-name = "vreg_l24a_3p075"; + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + vreg_l25a_1p2: l25 { + regulator-name = "vreg_l25a_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-allow-set-load; + }; + vreg_l26a_0p8: l27 { + regulator-name = "vreg_l26a_0p8"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + vreg_l28a_0p925: l28 { + regulator-name = "vreg_l28a_0p925"; + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <925000>; + regulator-allow-set-load; + }; + vreg_l29a_2p8: l29 { + regulator-name = "vreg_l29a_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + vreg_l30a_1p8: l30 { + regulator-name = "vreg_l30a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l32a_1p8: l32 { + regulator-name = "vreg_l32a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_lvs1a_1p8: lvs1 { + regulator-name = "vreg_lvs1a_1p8"; + }; + + vreg_lvs2a_1p8: lvs2 { + regulator-name = "vreg_lvs2a_1p8"; + }; + }; +}; + +&sdhc2 { + /* External SD card */ + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; + pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; + cd-gpios = <&msmgpio 38 0x1>; + vmmc-supply = <&vreg_l21a_2p95>; + vqmmc-supply = <&vreg_l13a_2p95>; + status = "okay"; +}; + &sound { compatible = "qcom,apq8096-sndcard"; model = "DB820c"; @@ -752,3 +979,84 @@ }; }; }; + +&spmi_bus { + pmic@0 { + pon@800 { + resin { + compatible = "qcom,pm8941-resin"; + interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + linux,code = <KEY_VOLUMEDOWN>; + }; + }; + }; +}; + +&ufsphy { + status = "okay"; + + vdda-phy-supply = <&vreg_l28a_0p925>; + vdda-pll-supply = <&vreg_l12a_1p8>; + + vdda-phy-max-microamp = <18380>; + vdda-pll-max-microamp = <9440>; + + vddp-ref-clk-supply = <&vreg_l25a_1p2>; + vddp-ref-clk-max-microamp = <100>; + vddp-ref-clk-always-on; +}; + +&ufshc { + status = "okay"; + + vcc-supply = <&vreg_l20a_2p95>; + vccq-supply = <&vreg_l25a_1p2>; + vccq2-supply = <&vreg_s4a_1p8>; + + vcc-max-microamp = <600000>; + vccq-max-microamp = <450000>; + vccq2-max-microamp = <450000>; +}; + +&usb2 { + status = "okay"; + extcon = <&usb2_id>; + + dwc3@7600000 { + extcon = <&usb2_id>; + dr_mode = "otg"; + maximum-speed = "high-speed"; + }; +}; + +&usb3 { + status = "okay"; + extcon = <&usb3_id>; + + dwc3@6a00000 { + extcon = <&usb3_id>; + dr_mode = "otg"; + }; +}; + +&usb3phy { + status = "okay"; + + vdda-phy-supply = <&vreg_l28a_0p925>; + vdda-pll-supply = <&vreg_l12a_1p8>; + +}; + +&wcd9335 { + clock-names = "mclk", "slimbus"; + clocks = <&div1_mclk>, + <&rpmcc RPM_SMD_BB_CLK1>; + + vdd-buck-supply = <&vreg_s4a_1p8>; + vdd-buck-sido-supply = <&vreg_s4a_1p8>; + vdd-tx-supply = <&vreg_s4a_1p8>; + vdd-rx-supply = <&vreg_s4a_1p8>; + vdd-io-supply = <&vreg_s4a_1p8>; +}; diff --git a/arch/arm64/boot/dts/qcom/apq8096-ifc6640.dts b/arch/arm64/boot/dts/qcom/apq8096-ifc6640.dts new file mode 100644 index 000000000000..f6ddf17ada81 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/apq8096-ifc6640.dts @@ -0,0 +1,385 @@ +// SPDX-License-Identifier: BSD-3-Clause + +/dts-v1/; + +#include "msm8996.dtsi" +#include "pm8994.dtsi" +#include "pmi8994.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> + +/ { + model = "Inforce 6640 Single Board Computer"; + compatible = "inforce,ifc6640", "qcom,apq8096-sbc", "qcom,apq8096"; + + qcom,msm-id = <291 0x00030001>; + qcom,board-id = <0x00010018 0>; + + aliases { + serial0 = &blsp2_uart1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + v1p05: v1p05-regulator { + compatible = "regulator-fixed"; + reglator-name = "v1p05"; + regulator-always-on; + regulator-boot-on; + + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + + vin-supply = <&v5p0>; + }; + + v12_poe: v12-poe-regulator { + compatible = "regulator-fixed"; + reglator-name = "v12_poe"; + regulator-always-on; + regulator-boot-on; + + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + }; + + v3p3: v3p3-regulator { + compatible = "regulator-fixed"; + regulator-name = "v3p3"; + regulator-always-on; + regulator-boot-on; + + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + vin-supply = <&v12_poe>; + }; + + v5p0: v5p0-regulator { + compatible = "regulator-fixed"; + regulator-name = "v5p0"; + regulator-always-on; + regulator-boot-on; + + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + vin-supply = <&v12_poe>; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-always-on; + regulator-boot-on; + + regulator-min-microvolt = <3800000>; + regulator-max-microvolt = <3800000>; + }; +}; + +&blsp2_uart1 { + status = "okay"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp2_uart1_2pins_default>; + pinctrl-1 = <&blsp2_uart1_2pins_sleep>; +}; + +&msmgpio { + sdc2_pins_default: sdc2-pins-default { + clk { + pins = "sdc2_clk"; + bias-disable; + drive-strength = <16>; + }; + + cmd { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <10>; + }; + + data { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <10>; + }; + + cd { + pins = "gpio38"; + function = "gpio"; + + bias-pull-up; + drive-strength = <16>; + }; + }; + + sdc2_pins_sleep: sdc2-pins-sleep { + clk { + pins = "sdc2_clk"; + bias-disable; + drive-strength = <2>; + }; + + cmd { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <2>; + }; + + data { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <2>; + }; + + cd { + pins = "gpio38"; + function = "gpio"; + bias-pull-up; + drive-strength = <2>; + }; + }; +}; + +&rpm_requests { + pm8994-regulators { + compatible = "qcom,rpm-pm8994-regulators"; + + vdd_s1-supply = <&vph_pwr>; + vdd_s2-supply = <&vph_pwr>; + vdd_s3-supply = <&vph_pwr>; + vdd_s4-supply = <&vph_pwr>; + vdd_s5-supply = <&vph_pwr>; + vdd_s6-supply = <&vph_pwr>; + vdd_s7-supply = <&vph_pwr>; + vdd_s8-supply = <&vph_pwr>; + vdd_s9-supply = <&vph_pwr>; + vdd_s10-supply = <&vph_pwr>; + vdd_s11-supply = <&vph_pwr>; + vdd_s12-supply = <&vph_pwr>; + vdd_l2_l26_l28-supply = <&vreg_s3a_1p3>; + vdd_l3_l11-supply = <&vreg_s3a_1p3>; + vdd_l4_l27_l31-supply = <&vreg_s3a_1p3>; + vdd_l5_l7-supply = <&vreg_s5a_2p15>; + vdd_l6_l12_l32-supply = <&vreg_s5a_2p15>; + vdd_l8_l16_l30-supply = <&vph_pwr>; + vdd_l25-supply = <&vreg_s3a_1p3>; + vdd_lvs1_2-supply = <&vreg_s4a_1p8>; + + vreg_s3a_1p3: s3 { + regulator-name = "vreg_s3a_1p3"; + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + }; + + vreg_s4a_1p8: s4 { + regulator-name = "vreg_s4a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + vreg_s5a_2p15: s5 { + regulator-name = "vreg_s5a_2p15"; + regulator-min-microvolt = <2150000>; + regulator-max-microvolt = <2150000>; + }; + vreg_s7a_1p0: s7 { + regulator-name = "vreg_s7a_1p0"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + }; + + vreg_l1a_1p0: l1 { + regulator-name = "vreg_l1a_1p0"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + vreg_l2a_1p25: l2 { + regulator-name = "vreg_l2a_1p25"; + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1250000>; + }; + vreg_l3a_0p875: l3 { + regulator-name = "vreg_l3a_0p875"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + }; + vreg_l4a_1p225: l4 { + regulator-name = "vreg_l4a_1p225"; + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + vreg_l6a_1p2: l6 { + regulator-name = "vreg_l6a_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + vreg_l8a_1p8: l8 { + regulator-name = "vreg_l8a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l9a_1p8: l9 { + regulator-name = "vreg_l9a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l10a_1p8: l10 { + regulator-name = "vreg_l10a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l11a_1p15: l11 { + regulator-name = "vreg_l11a_1p15"; + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + }; + vreg_l12a_1p8: l12 { + regulator-name = "vreg_l12a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l13a_2p95: l13 { + regulator-name = "vreg_l13a_2p95"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + vreg_l14a_1p8: l14 { + regulator-name = "vreg_l14a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l15a_1p8: l15 { + regulator-name = "vreg_l15a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l16a_2p7: l16 { + regulator-name = "vreg_l16a_2p7"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + vreg_l17a_2p8: l17 { + regulator-name = "vreg_l17a_2p8"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + }; + vreg_l18a_2p85: l18 { + regulator-name = "vreg_l18a_2p85"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2900000>; + }; + vreg_l19a_2p8: l19 { + regulator-name = "vreg_l19a_2p8"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + vreg_l20a_2p95: l20 { + regulator-name = "vreg_l20a_2p95"; + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + }; + vreg_l21a_2p95: l21 { + regulator-name = "vreg_l21a_2p95"; + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + }; + vreg_l22a_3p0: l22 { + regulator-name = "vreg_l22a_3p0"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + vreg_l23a_2p8: l23 { + regulator-name = "vreg_l23a_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + vreg_l24a_3p075: l24 { + regulator-name = "vreg_l24a_3p075"; + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + vreg_l25a_1p2: l25 { + regulator-name = "vreg_l25a_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-allow-set-load; + }; + vreg_l26a_0p8: l27 { + regulator-name = "vreg_l26a_0p8"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + vreg_l28a_0p925: l28 { + regulator-name = "vreg_l28a_0p925"; + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <925000>; + regulator-allow-set-load; + }; + vreg_l29a_2p8: l29 { + regulator-name = "vreg_l29a_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + vreg_l30a_1p8: l30 { + regulator-name = "vreg_l30a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l32a_1p8: l32 { + regulator-name = "vreg_l32a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_lvs1a_1p8: lvs1 { + regulator-name = "vreg_lvs1a_1p8"; + }; + + vreg_lvs2a_1p8: lvs2 { + regulator-name = "vreg_lvs2a_1p8"; + }; + }; +}; + +&sdhc2 { + status = "okay"; + + bus-width = <4>; + + cd-gpios = <&msmgpio 38 0x1>; + + vmmc-supply = <&vreg_l21a_2p95>; + vqmmc-supply = <&vreg_l13a_2p95>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_pins_default>; + pinctrl-1 = <&sdc2_pins_sleep>; +}; + +&ufshc { + status = "okay"; + + vcc-supply = <&vreg_l20a_2p95>; + vccq-supply = <&vreg_l25a_1p2>; + vccq2-supply = <&vreg_s4a_1p8>; + + vcc-max-microamp = <600000>; + vccq-max-microamp = <450000>; + vccq2-max-microamp = <450000>; +}; + +&ufsphy { + status = "okay"; + + vdda-phy-supply = <&vreg_l28a_0p925>; + vdda-pll-supply = <&vreg_l12a_1p8>; + + vdda-phy-max-microamp = <18380>; + vdda-pll-max-microamp = <9440>; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts new file mode 100644 index 000000000000..d1ccb9472c8b --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts @@ -0,0 +1,283 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/dts-v1/; + +#include "msm8916.dtsi" +#include "pm8916.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + model = "Longcheer L8150"; + compatible = "longcheer,l8150", "qcom,msm8916-v1-qrd/9-v1", "qcom,msm8916"; + + aliases { + serial0 = &blsp1_uart2; + }; + + chosen { + stdout-path = "serial0"; + }; + + reserved-memory { + // wcnss.mdt is not relocatable, so it must be loaded at 0x8b600000 + /delete-node/ wcnss@89300000; + + wcnss_mem: wcnss@8b600000 { + reg = <0x0 0x8b600000 0x0 0x600000>; + no-map; + }; + }; + + soc { + sdhci@7824000 { + status = "okay"; + + vmmc-supply = <&pm8916_l8>; + vqmmc-supply = <&pm8916_l5>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; + pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; + }; + + sdhci@7864000 { + status = "okay"; + + vmmc-supply = <&pm8916_l11>; + vqmmc-supply = <&pm8916_l12>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on>; + pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>; + + non-removable; + }; + + serial@78b0000 { + status = "okay"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp1_uart2_default>; + pinctrl-1 = <&blsp1_uart2_sleep>; + }; + + usb@78d9000 { + status = "okay"; + dr_mode = "peripheral"; + extcon = <&usb_vbus>; + + hnp-disable; + srp-disable; + adp-disable; + + ulpi { + phy { + extcon = <&usb_vbus>; + v1p8-supply = <&pm8916_l7>; + v3p3-supply = <&pm8916_l13>; + }; + }; + }; + + wcnss@a21b000 { + status = "okay"; + }; + + /* + * Attempting to enable these devices causes a "synchronous + * external abort". Suspected cause is that the debug power + * domain is not enabled by default on this device. + * Disable these devices for now to avoid the crash. + * + * See: https://lore.kernel.org/linux-arm-msm/20190618202623.GA53651@gerhold.net/ + */ + tpiu@820000 { status = "disabled"; }; + funnel@821000 { status = "disabled"; }; + replicator@824000 { status = "disabled"; }; + etf@825000 { status = "disabled"; }; + etr@826000 { status = "disabled"; }; + funnel@841000 { status = "disabled"; }; + debug@850000 { status = "disabled"; }; + debug@852000 { status = "disabled"; }; + debug@854000 { status = "disabled"; }; + debug@856000 { status = "disabled"; }; + etm@85c000 { status = "disabled"; }; + etm@85d000 { status = "disabled"; }; + etm@85e000 { status = "disabled"; }; + etm@85f000 { status = "disabled"; }; + }; + + // FIXME: Use extcon device provided by charger driver when available + usb_vbus: usb-vbus { + compatible = "linux,extcon-usb-gpio"; + vbus-gpio = <&msmgpio 62 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb_vbus_default>; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_default>; + + label = "GPIO Buttons"; + + volume-up { + label = "Volume Up"; + gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + }; + }; +}; + +&msmgpio { + gpio_keys_default: gpio_keys_default { + pinmux { + function = "gpio"; + pins = "gpio107"; + }; + pinconf { + pins = "gpio107"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + usb_vbus_default: usb-vbus-default { + pinmux { + function = "gpio"; + pins = "gpio62"; + }; + pinconf { + pins = "gpio62"; + bias-pull-up; + }; + }; +}; + +&spmi_bus { + pm8916@0 { + pon@800 { + volume-down { + compatible = "qcom,pm8941-resin"; + interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; + bias-pull-up; + linux,code = <KEY_VOLUMEDOWN>; + }; + }; + }; +}; + +&smd_rpm_regulators { + vdd_l1_l2_l3-supply = <&pm8916_s3>; + vdd_l4_l5_l6-supply = <&pm8916_s4>; + vdd_l7-supply = <&pm8916_s4>; + + s1 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1300000>; + }; + + s3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1300000>; + }; + + s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2100000>; + }; + + l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + l3 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1287500>; + }; + + l4 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l8 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2900000>; + }; + + l9 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + l10 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2800000>; + }; + + l11 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + regulator-system-load = <200000>; + }; + + l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + l13 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + + l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l16 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + l18 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi new file mode 100644 index 000000000000..bd1eb3eeca53 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi @@ -0,0 +1,316 @@ +// SPDX-License-Identifier: GPL-2.0-only + +#include "msm8916.dtsi" +#include "pm8916.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + aliases { + serial0 = &blsp1_uart2; + }; + + chosen { + stdout-path = "serial0"; + }; + + soc { + sdhci@7824000 { + status = "okay"; + + vmmc-supply = <&pm8916_l8>; + vqmmc-supply = <&pm8916_l5>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; + pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; + }; + + sdhci@7864000 { + status = "okay"; + + vmmc-supply = <&pm8916_l11>; + vqmmc-supply = <&pm8916_l12>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; + pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; + + cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>; + }; + + serial@78b0000 { + status = "okay"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp1_uart2_default>; + pinctrl-1 = <&blsp1_uart2_sleep>; + }; + + usb@78d9000 { + status = "okay"; + extcon = <&muic>, <&muic>; + + hnp-disable; + srp-disable; + adp-disable; + + ulpi { + phy { + extcon = <&muic>; + v1p8-supply = <&pm8916_l7>; + v3p3-supply = <&pm8916_l13>; + }; + }; + }; + + wcnss@a21b000 { + status = "okay"; + }; + + /* + * Attempting to enable these devices causes a "synchronous + * external abort". Suspected cause is that the debug power + * domain is not enabled by default on this device. + * Disable these devices for now to avoid the crash. + * + * See: https://lore.kernel.org/linux-arm-msm/20190618202623.GA53651@gerhold.net/ + */ + tpiu@820000 { status = "disabled"; }; + funnel@821000 { status = "disabled"; }; + replicator@824000 { status = "disabled"; }; + etf@825000 { status = "disabled"; }; + etr@826000 { status = "disabled"; }; + funnel@841000 { status = "disabled"; }; + debug@850000 { status = "disabled"; }; + debug@852000 { status = "disabled"; }; + debug@854000 { status = "disabled"; }; + debug@856000 { status = "disabled"; }; + etm@85c000 { status = "disabled"; }; + etm@85d000 { status = "disabled"; }; + etm@85e000 { status = "disabled"; }; + etm@85f000 { status = "disabled"; }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_default>; + + label = "GPIO Buttons"; + + volume-up { + label = "Volume Up"; + gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + }; + + home { + label = "Home"; + gpios = <&msmgpio 109 GPIO_ACTIVE_LOW>; + linux,code = <KEY_HOMEPAGE>; + }; + }; + + gpio-hall-sensor { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_hall_sensor_default>; + + label = "GPIO Hall Effect Sensor"; + + hall-sensor { + label = "Hall Effect Sensor"; + gpios = <&msmgpio 52 GPIO_ACTIVE_LOW>; + linux,input-type = <EV_SW>; + linux,code = <SW_LID>; + linux,can-disable; + }; + }; + + i2c-muic { + compatible = "i2c-gpio"; + sda-gpios = <&msmgpio 105 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + scl-gpios = <&msmgpio 106 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + + #address-cells = <1>; + #size-cells = <0>; + + muic: sm5502@25 { + compatible = "siliconmitus,sm5502-muic"; + + reg = <0x25>; + interrupt-parent = <&msmgpio>; + interrupts = <12 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-names = "default"; + pinctrl-0 = <&muic_int_default>; + }; + }; +}; + +&msmgpio { + gpio_keys_default: gpio_keys_default { + pinmux { + function = "gpio"; + pins = "gpio107", "gpio109"; + }; + pinconf { + pins = "gpio107", "gpio109"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + gpio_hall_sensor_default: gpio_hall_sensor_default { + pinmux { + function = "gpio"; + pins = "gpio52"; + }; + pinconf { + pins = "gpio52"; + drive-strength = <2>; + bias-disable; + }; + }; + + muic_int_default: muic_int_default { + pinmux { + function = "gpio"; + pins = "gpio12"; + }; + pinconf { + pins = "gpio12"; + drive-strength = <2>; + bias-disable; + }; + }; +}; + +&smd_rpm_regulators { + vdd_l1_l2_l3-supply = <&pm8916_s3>; + vdd_l4_l5_l6-supply = <&pm8916_s4>; + vdd_l7-supply = <&pm8916_s4>; + + s1 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1300000>; + }; + + s3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1300000>; + }; + + s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2100000>; + }; + + l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + l3 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1287500>; + }; + + l4 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l8 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2900000>; + }; + + l9 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + l10 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2800000>; + }; + + l11 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + regulator-system-load = <200000>; + }; + + l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + l13 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + + l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l16 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + l18 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; +}; + +&spmi_bus { + pm8916@0 { + pon@800 { + volume-down { + compatible = "qcom,pm8941-resin"; + interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; + bias-pull-up; + linux,code = <KEY_VOLUMEDOWN>; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts new file mode 100644 index 000000000000..d10f7ac5089f --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts @@ -0,0 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/dts-v1/; + +#include "msm8916-samsung-a2015-common.dtsi" + +/ { + model = "Samsung Galaxy A3U (EUR)"; + compatible = "samsung,a3u-eur", "qcom,msm8916"; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts new file mode 100644 index 000000000000..6629a621139c --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/dts-v1/; + +#include "msm8916-samsung-a2015-common.dtsi" + +/ { + model = "Samsung Galaxy A5U (EUR)"; + compatible = "samsung,a5u-eur", "qcom,msm8916"; +}; + +&pronto { + iris { + compatible = "qcom,wcn3680"; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi index 5ea9fb8f2f87..9f31064f2374 100644 --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi @@ -102,10 +102,11 @@ reg = <0x0>; next-level-cache = <&L2_0>; enable-method = "psci"; - cpu-idle-states = <&CPU_SLEEP_0>; clocks = <&apcs>; operating-points-v2 = <&cpu_opp_table>; #cooling-cells = <2>; + power-domains = <&CPU_PD0>; + power-domain-names = "psci"; }; CPU1: cpu@1 { @@ -114,10 +115,11 @@ reg = <0x1>; next-level-cache = <&L2_0>; enable-method = "psci"; - cpu-idle-states = <&CPU_SLEEP_0>; clocks = <&apcs>; operating-points-v2 = <&cpu_opp_table>; #cooling-cells = <2>; + power-domains = <&CPU_PD1>; + power-domain-names = "psci"; }; CPU2: cpu@2 { @@ -126,10 +128,11 @@ reg = <0x2>; next-level-cache = <&L2_0>; enable-method = "psci"; - cpu-idle-states = <&CPU_SLEEP_0>; clocks = <&apcs>; operating-points-v2 = <&cpu_opp_table>; #cooling-cells = <2>; + power-domains = <&CPU_PD2>; + power-domain-names = "psci"; }; CPU3: cpu@3 { @@ -138,10 +141,11 @@ reg = <0x3>; next-level-cache = <&L2_0>; enable-method = "psci"; - cpu-idle-states = <&CPU_SLEEP_0>; clocks = <&apcs>; operating-points-v2 = <&cpu_opp_table>; #cooling-cells = <2>; + power-domains = <&CPU_PD3>; + power-domain-names = "psci"; }; L2_0: l2-cache { @@ -161,12 +165,57 @@ min-residency-us = <2000>; local-timer-stop; }; + + CLUSTER_RET: cluster-retention { + compatible = "domain-idle-state"; + arm,psci-suspend-param = <0x41000012>; + entry-latency-us = <500>; + exit-latency-us = <500>; + min-residency-us = <2000>; + }; + + CLUSTER_PWRDN: cluster-gdhs { + compatible = "domain-idle-state"; + arm,psci-suspend-param = <0x41000032>; + entry-latency-us = <2000>; + exit-latency-us = <2000>; + min-residency-us = <6000>; + }; }; }; psci { compatible = "arm,psci-1.0"; method = "smc"; + + CPU_PD0: cpu-pd0 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&CPU_SLEEP_0>; + }; + + CPU_PD1: cpu-pd1 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&CPU_SLEEP_0>; + }; + + CPU_PD2: cpu-pd2 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&CPU_SLEEP_0>; + }; + + CPU_PD3: cpu-pd3 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&CPU_SLEEP_0>; + }; + + CLUSTER_PD: cluster-pd { + #power-domain-cells = <0>; + domain-idle-states = <&CLUSTER_RET>, <&CLUSTER_PWRDN>; + }; }; pmu { @@ -179,7 +228,7 @@ polling-delay-passive = <250>; polling-delay = <1000>; - thermal-sensors = <&tsens 4>; + thermal-sensors = <&tsens 5>; trips { cpu0_1_alert0: trip-point@0 { @@ -209,7 +258,7 @@ polling-delay-passive = <250>; polling-delay = <1000>; - thermal-sensors = <&tsens 3>; + thermal-sensors = <&tsens 4>; trips { cpu2_3_alert0: trip-point@0 { @@ -429,7 +478,8 @@ compatible = "qcom,msm8916-apcs-kpss-global", "syscon"; reg = <0xb011000 0x1000>; #mbox-cells = <1>; - clocks = <&a53pll>; + clocks = <&a53pll>, <&gcc GPLL0_VOTE>; + clock-names = "pll", "aux"; #clock-cells = <0>; }; @@ -816,6 +866,8 @@ nvmem-cells = <&tsens_caldata>, <&tsens_calsel>; nvmem-cell-names = "calib", "calib_sel"; #qcom,sensors = <5>; + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow"; #thermal-sensor-cells = <1>; }; diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi index 96c0a481f454..7ae082ea14ea 100644 --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi @@ -16,72 +16,19 @@ chosen { }; - memory { - device_type = "memory"; - /* We expect the bootloader to fill in the reg */ - reg = <0 0 0 0>; - }; - - reserved-memory { - #address-cells = <2>; - #size-cells = <2>; - ranges; - - mba_region: mba@91500000 { - reg = <0x0 0x91500000 0x0 0x200000>; - no-map; - }; - - slpi_region: slpi@90b00000 { - reg = <0x0 0x90b00000 0x0 0xa00000>; - no-map; - }; - - venus_region: venus@90400000 { - reg = <0x0 0x90400000 0x0 0x700000>; - no-map; - }; - - adsp_region: adsp@8ea00000 { - reg = <0x0 0x8ea00000 0x0 0x1a00000>; - no-map; - }; - - mpss_region: mpss@88800000 { - reg = <0x0 0x88800000 0x0 0x6200000>; - no-map; - }; - - smem_mem: smem-mem@86000000 { - reg = <0x0 0x86000000 0x0 0x200000>; - no-map; - }; - - memory@85800000 { - reg = <0x0 0x85800000 0x0 0x800000>; - no-map; - }; - - memory@86200000 { - reg = <0x0 0x86200000 0x0 0x2600000>; - no-map; - }; - - rmtfs@86700000 { - compatible = "qcom,rmtfs-mem"; - - size = <0x0 0x200000>; - alloc-ranges = <0x0 0xa0000000 0x0 0x2000000>; - no-map; - - qcom,client-id = <1>; - qcom,vmid = <15>; + clocks { + xo_board: xo_board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <19200000>; + clock-output-names = "xo_board"; }; - zap_shader_region: gpu@8f200000 { - compatible = "shared-dma-pool"; - reg = <0x0 0x90b00000 0x0 0xa00000>; - no-map; + sleep_clk: sleep_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32764>; + clock-output-names = "sleep_clk"; }; }; @@ -173,291 +120,93 @@ }; }; - thermal-zones { - cpu0-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens0 3>; - - trips { - cpu0_alert0: trip-point@0 { - temperature = <75000>; - hysteresis = <2000>; - type = "passive"; - }; - - cpu0_crit: cpu_crit { - temperature = <110000>; - hysteresis = <2000>; - type = "critical"; - }; - }; - }; - - cpu1-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens0 5>; - - trips { - cpu1_alert0: trip-point@0 { - temperature = <75000>; - hysteresis = <2000>; - type = "passive"; - }; - - cpu1_crit: cpu_crit { - temperature = <110000>; - hysteresis = <2000>; - type = "critical"; - }; - }; - }; - - cpu2-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens0 8>; - - trips { - cpu2_alert0: trip-point@0 { - temperature = <75000>; - hysteresis = <2000>; - type = "passive"; - }; - - cpu2_crit: cpu_crit { - temperature = <110000>; - hysteresis = <2000>; - type = "critical"; - }; - }; - }; - - cpu3-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens0 10>; - - trips { - cpu3_alert0: trip-point@0 { - temperature = <75000>; - hysteresis = <2000>; - type = "passive"; - }; - - cpu3_crit: cpu_crit { - temperature = <110000>; - hysteresis = <2000>; - type = "critical"; - }; - }; - }; - - gpu-thermal-top { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens1 6>; - - trips { - gpu1_alert0: trip-point@0 { - temperature = <90000>; - hysteresis = <2000>; - type = "hot"; - }; - }; + firmware { + scm { + compatible = "qcom,scm-msm8996"; + qcom,dload-mode = <&tcsr 0x13000>; }; + }; - gpu-thermal-bottom { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens1 7>; + tcsr_mutex: hwlock { + compatible = "qcom,tcsr-mutex"; + syscon = <&tcsr_mutex_regs 0 0x1000>; + #hwlock-cells = <1>; + }; - trips { - gpu2_alert0: trip-point@0 { - temperature = <90000>; - hysteresis = <2000>; - type = "hot"; - }; - }; - }; + memory { + device_type = "memory"; + /* We expect the bootloader to fill in the reg */ + reg = <0 0 0 0>; + }; - m4m-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; - thermal-sensors = <&tsens0 1>; + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; - trips { - m4m_alert0: trip-point@0 { - temperature = <90000>; - hysteresis = <2000>; - type = "hot"; - }; - }; + mba_region: mba@91500000 { + reg = <0x0 0x91500000 0x0 0x200000>; + no-map; }; - l3-or-venus-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens0 2>; - - trips { - l3_or_venus_alert0: trip-point@0 { - temperature = <90000>; - hysteresis = <2000>; - type = "hot"; - }; - }; + slpi_region: slpi@90b00000 { + reg = <0x0 0x90b00000 0x0 0xa00000>; + no-map; }; - cluster0-l2-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens0 7>; - - trips { - cluster0_l2_alert0: trip-point@0 { - temperature = <90000>; - hysteresis = <2000>; - type = "hot"; - }; - }; + venus_region: venus@90400000 { + reg = <0x0 0x90400000 0x0 0x700000>; + no-map; }; - cluster1-l2-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens0 12>; - - trips { - cluster1_l2_alert0: trip-point@0 { - temperature = <90000>; - hysteresis = <2000>; - type = "hot"; - }; - }; + adsp_region: adsp@8ea00000 { + reg = <0x0 0x8ea00000 0x0 0x1a00000>; + no-map; }; - camera-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens1 1>; - - trips { - camera_alert0: trip-point@0 { - temperature = <90000>; - hysteresis = <2000>; - type = "hot"; - }; - }; + mpss_region: mpss@88800000 { + reg = <0x0 0x88800000 0x0 0x6200000>; + no-map; }; - q6-dsp-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens1 2>; - - trips { - q6_dsp_alert0: trip-point@0 { - temperature = <90000>; - hysteresis = <2000>; - type = "hot"; - }; - }; + smem_mem: smem-mem@86000000 { + reg = <0x0 0x86000000 0x0 0x200000>; + no-map; }; - mem-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens1 3>; - - trips { - mem_alert0: trip-point@0 { - temperature = <90000>; - hysteresis = <2000>; - type = "hot"; - }; - }; + memory@85800000 { + reg = <0x0 0x85800000 0x0 0x800000>; + no-map; }; - modemtx-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&tsens1 4>; - - trips { - modemtx_alert0: trip-point@0 { - temperature = <90000>; - hysteresis = <2000>; - type = "hot"; - }; - }; + memory@86200000 { + reg = <0x0 0x86200000 0x0 0x2600000>; + no-map; }; - }; - timer { - compatible = "arm,armv8-timer"; - interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, - <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, - <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, - <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; - }; + rmtfs@86700000 { + compatible = "qcom,rmtfs-mem"; - clocks { - xo_board: xo_board { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <19200000>; - clock-output-names = "xo_board"; - }; + size = <0x0 0x200000>; + alloc-ranges = <0x0 0xa0000000 0x0 0x2000000>; + no-map; - sleep_clk: sleep_clk { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <32764>; - clock-output-names = "sleep_clk"; + qcom,client-id = <1>; + qcom,vmid = <15>; }; - }; - - psci { - compatible = "arm,psci-1.0"; - method = "smc"; - }; - firmware { - scm { - compatible = "qcom,scm-msm8996"; - - qcom,dload-mode = <&tcsr 0x13000>; + zap_shader_region: gpu@8f200000 { + compatible = "shared-dma-pool"; + reg = <0x0 0x90b00000 0x0 0xa00000>; + no-map; }; }; - tcsr_mutex: hwlock { - compatible = "qcom,tcsr-mutex"; - syscon = <&tcsr_mutex_regs 0 0x1000>; - #hwlock-cells = <1>; - }; - - smem { - compatible = "qcom,smem"; - memory-region = <&smem_mem>; - hwlocks = <&tcsr_mutex 3>; - }; - rpm-glink { compatible = "qcom,glink-rpm"; @@ -467,7 +216,7 @@ mboxes = <&apcs_glb 0>; - rpm_requests { + rpm_requests: rpm-requests { compatible = "qcom,rpm-msm8996"; qcom,glink-channels = "rpm_requests"; @@ -509,57 +258,83 @@ }; }; }; + }; + }; - pm8994-regulators { - compatible = "qcom,rpm-pm8994-regulators"; - - pm8994_s1: s1 {}; - pm8994_s2: s2 {}; - pm8994_s3: s3 {}; - pm8994_s4: s4 {}; - pm8994_s5: s5 {}; - pm8994_s6: s6 {}; - pm8994_s7: s7 {}; - pm8994_s8: s8 {}; - pm8994_s9: s9 {}; - pm8994_s10: s10 {}; - pm8994_s11: s11 {}; - pm8994_s12: s12 {}; - - pm8994_l1: l1 {}; - pm8994_l2: l2 {}; - pm8994_l3: l3 {}; - pm8994_l4: l4 {}; - pm8994_l5: l5 {}; - pm8994_l6: l6 {}; - pm8994_l7: l7 {}; - pm8994_l8: l8 {}; - pm8994_l9: l9 {}; - pm8994_l10: l10 {}; - pm8994_l11: l11 {}; - pm8994_l12: l12 {}; - pm8994_l13: l13 {}; - pm8994_l14: l14 {}; - pm8994_l15: l15 {}; - pm8994_l16: l16 {}; - pm8994_l17: l17 {}; - pm8994_l18: l18 {}; - pm8994_l19: l19 {}; - pm8994_l20: l20 {}; - pm8994_l21: l21 {}; - pm8994_l22: l22 {}; - pm8994_l23: l23 {}; - pm8994_l24: l24 {}; - pm8994_l25: l25 {}; - pm8994_l26: l26 {}; - pm8994_l27: l27 {}; - pm8994_l28: l28 {}; - pm8994_l29: l29 {}; - pm8994_l30: l30 {}; - pm8994_l31: l31 {}; - pm8994_l32: l32 {}; - }; + smem { + compatible = "qcom,smem"; + memory-region = <&smem_mem>; + hwlocks = <&tcsr_mutex 3>; + }; + + smp2p-adsp { + compatible = "qcom,smp2p"; + qcom,smem = <443>, <429>; + + interrupts = <0 158 IRQ_TYPE_EDGE_RISING>; + + mboxes = <&apcs_glb 10>; + + qcom,local-pid = <0>; + qcom,remote-pid = <2>; + + smp2p_adsp_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + smp2p_adsp_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-modem { + compatible = "qcom,smp2p"; + qcom,smem = <435>, <428>; + + interrupts = <GIC_SPI 451 IRQ_TYPE_EDGE_RISING>; + + mboxes = <&apcs_glb 14>; + + qcom,local-pid = <0>; + qcom,remote-pid = <1>; + + modem_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + modem_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-slpi { + compatible = "qcom,smp2p"; + qcom,smem = <481>, <430>; + + interrupts = <GIC_SPI 178 IRQ_TYPE_EDGE_RISING>; + + mboxes = <&apcs_glb 26>; + + qcom,local-pid = <0>; + qcom,remote-pid = <3>; + + smp2p_slpi_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + + smp2p_slpi_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; }; }; @@ -569,9 +344,90 @@ ranges = <0 0 0 0xffffffff>; compatible = "simple-bus"; + pcie_phy: phy@34000 { + compatible = "qcom,msm8996-qmp-pcie-phy"; + reg = <0x00034000 0x488>; + #clock-cells = <1>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>, + <&gcc GCC_PCIE_PHY_CFG_AHB_CLK>, + <&gcc GCC_PCIE_CLKREF_CLK>; + clock-names = "aux", "cfg_ahb", "ref"; + + resets = <&gcc GCC_PCIE_PHY_BCR>, + <&gcc GCC_PCIE_PHY_COM_BCR>, + <&gcc GCC_PCIE_PHY_COM_NOCSR_BCR>; + reset-names = "phy", "common", "cfg"; + status = "disabled"; + + pciephy_0: lane@35000 { + reg = <0x00035000 0x130>, + <0x00035200 0x200>, + <0x00035400 0x1dc>; + #phy-cells = <0>; + + clock-output-names = "pcie_0_pipe_clk_src"; + clocks = <&gcc GCC_PCIE_0_PIPE_CLK>; + clock-names = "pipe0"; + resets = <&gcc GCC_PCIE_0_PHY_BCR>; + reset-names = "lane0"; + }; + + pciephy_1: lane@36000 { + reg = <0x00036000 0x130>, + <0x00036200 0x200>, + <0x00036400 0x1dc>; + #phy-cells = <0>; + + clock-output-names = "pcie_1_pipe_clk_src"; + clocks = <&gcc GCC_PCIE_1_PIPE_CLK>; + clock-names = "pipe1"; + resets = <&gcc GCC_PCIE_1_PHY_BCR>; + reset-names = "lane1"; + }; + + pciephy_2: lane@37000 { + reg = <0x00037000 0x130>, + <0x00037200 0x200>, + <0x00037400 0x1dc>; + #phy-cells = <0>; + + clock-output-names = "pcie_2_pipe_clk_src"; + clocks = <&gcc GCC_PCIE_2_PIPE_CLK>; + clock-names = "pipe2"; + resets = <&gcc GCC_PCIE_2_PHY_BCR>; + reset-names = "lane2"; + }; + }; + rpm_msg_ram: memory@68000 { compatible = "qcom,rpm-msg-ram"; - reg = <0x68000 0x6000>; + reg = <0x00068000 0x6000>; + }; + + qfprom@74000 { + compatible = "qcom,qfprom"; + reg = <0x00074000 0x8ff>; + #address-cells = <1>; + #size-cells = <1>; + + qusb2p_hstx_trim: hstx_trim@24e { + reg = <0x24e 0x2>; + bits = <5 4>; + }; + + qusb2s_hstx_trim: hstx_trim@24f { + reg = <0x24f 0x1>; + bits = <1 4>; + }; + + gpu_speed_bin: gpu_speed_bin@133 { + reg = <0x133 0x1>; + bits = <5 3>; + }; }; rng: rng@83000 { @@ -581,262 +437,276 @@ clock-names = "core"; }; - tcsr_mutex_regs: syscon@740000 { - compatible = "syscon"; - reg = <0x740000 0x20000>; + gcc: clock-controller@300000 { + compatible = "qcom,gcc-msm8996"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + reg = <0x00300000 0x90000>; }; tsens0: thermal-sensor@4a9000 { compatible = "qcom,msm8996-tsens"; - reg = <0x4a9000 0x1000>, /* TM */ - <0x4a8000 0x1000>; /* SROT */ + reg = <0x004a9000 0x1000>, /* TM */ + <0x004a8000 0x1000>; /* SROT */ #qcom,sensors = <13>; + interrupts = <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 445 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", "critical"; #thermal-sensor-cells = <1>; }; tsens1: thermal-sensor@4ad000 { compatible = "qcom,msm8996-tsens"; - reg = <0x4ad000 0x1000>, /* TM */ - <0x4ac000 0x1000>; /* SROT */ + reg = <0x004ad000 0x1000>, /* TM */ + <0x004ac000 0x1000>; /* SROT */ #qcom,sensors = <8>; + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", "critical"; #thermal-sensor-cells = <1>; }; - tcsr: syscon@7a0000 { - compatible = "qcom,tcsr-msm8996", "syscon"; - reg = <0x7a0000 0x18000>; - }; - - intc: interrupt-controller@9bc0000 { - compatible = "qcom,msm8996-gic-v3", "arm,gic-v3"; - #interrupt-cells = <3>; - interrupt-controller; - #redistributor-regions = <1>; - redistributor-stride = <0x0 0x40000>; - reg = <0x09bc0000 0x10000>, - <0x09c00000 0x100000>; - interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + tcsr_mutex_regs: syscon@740000 { + compatible = "syscon"; + reg = <0x00740000 0x20000>; }; - apcs_glb: mailbox@9820000 { - compatible = "qcom,msm8996-apcs-hmss-global"; - reg = <0x9820000 0x1000>; - - #mbox-cells = <1>; + tcsr: syscon@7a0000 { + compatible = "qcom,tcsr-msm8996", "syscon"; + reg = <0x007a0000 0x18000>; }; - gcc: clock-controller@300000 { - compatible = "qcom,gcc-msm8996"; + mmcc: clock-controller@8c0000 { + compatible = "qcom,mmcc-msm8996"; #clock-cells = <1>; #reset-cells = <1>; #power-domain-cells = <1>; - reg = <0x300000 0x90000>; + reg = <0x008c0000 0x40000>; + assigned-clocks = <&mmcc MMPLL9_PLL>, + <&mmcc MMPLL1_PLL>, + <&mmcc MMPLL3_PLL>, + <&mmcc MMPLL4_PLL>, + <&mmcc MMPLL5_PLL>; + assigned-clock-rates = <624000000>, + <810000000>, + <980000000>, + <960000000>, + <825000000>; }; - kryocc: clock-controller@6400000 { - compatible = "qcom,apcc-msm8996"; - reg = <0x6400000 0x90000>; - #clock-cells = <1>; - }; + mdss: mdss@900000 { + compatible = "qcom,mdss"; - blsp1_uart1: serial@7570000 { - compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; - reg = <0x07570000 0x1000>; - interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, - <&gcc GCC_BLSP1_AHB_CLK>; - clock-names = "core", "iface"; - status = "disabled"; - }; + reg = <0x00900000 0x1000>, + <0x009b0000 0x1040>, + <0x009b8000 0x1040>; + reg-names = "mdss_phys", + "vbif_phys", + "vbif_nrt_phys"; - blsp1_spi0: spi@7575000 { - compatible = "qcom,spi-qup-v2.2.1"; - reg = <0x07575000 0x600>; - interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>, - <&gcc GCC_BLSP1_AHB_CLK>; - clock-names = "core", "iface"; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&blsp1_spi0_default>; - pinctrl-1 = <&blsp1_spi0_sleep>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; + power-domains = <&mmcc MDSS_GDSC>; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; - blsp2_i2c0: i2c@75b5000 { - compatible = "qcom,i2c-qup-v2.2.1"; - reg = <0x075b5000 0x1000>; - interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP2_AHB_CLK>, - <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>; - clock-names = "iface", "core"; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&blsp2_i2c0_default>; - pinctrl-1 = <&blsp2_i2c0_sleep>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; + interrupt-controller; + #interrupt-cells = <1>; - blsp2_uart1: serial@75b0000 { - compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; - reg = <0x75b0000 0x1000>; - interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>, - <&gcc GCC_BLSP2_AHB_CLK>; - clock-names = "core", "iface"; - status = "disabled"; - }; + clocks = <&mmcc MDSS_AHB_CLK>; + clock-names = "iface"; - blsp2_i2c1: i2c@75b6000 { - compatible = "qcom,i2c-qup-v2.2.1"; - reg = <0x075b6000 0x1000>; - interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP2_AHB_CLK>, - <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>; - clock-names = "iface", "core"; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&blsp2_i2c1_default>; - pinctrl-1 = <&blsp2_i2c1_sleep>; #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; + #size-cells = <1>; + ranges; - blsp2_uart2: serial@75b1000 { - compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; - reg = <0x075b1000 0x1000>; - interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP2_UART3_APPS_CLK>, - <&gcc GCC_BLSP2_AHB_CLK>; - clock-names = "core", "iface"; - status = "disabled"; - }; + mdp: mdp@901000 { + compatible = "qcom,mdp5"; + reg = <0x00901000 0x90000>; + reg-names = "mdp_phys"; - blsp1_i2c2: i2c@7577000 { - compatible = "qcom,i2c-qup-v2.2.1"; - reg = <0x07577000 0x1000>; - interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP1_AHB_CLK>, - <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>; - clock-names = "iface", "core"; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&blsp1_i2c2_default>; - pinctrl-1 = <&blsp1_i2c2_sleep>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; + interrupt-parent = <&mdss>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; - blsp2_spi5: spi@75ba000{ - compatible = "qcom,spi-qup-v2.2.1"; - reg = <0x075ba000 0x600>; - interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP2_QUP6_SPI_APPS_CLK>, - <&gcc GCC_BLSP2_AHB_CLK>; - clock-names = "core", "iface"; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&blsp2_spi5_default>; - pinctrl-1 = <&blsp2_spi5_sleep>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; + clocks = <&mmcc MDSS_AHB_CLK>, + <&mmcc MDSS_AXI_CLK>, + <&mmcc MDSS_MDP_CLK>, + <&mmcc SMMU_MDP_AXI_CLK>, + <&mmcc MDSS_VSYNC_CLK>; + clock-names = "iface", + "bus", + "core", + "iommu", + "vsync"; - sdhc2: sdhci@74a4900 { - status = "disabled"; - compatible = "qcom,sdhci-msm-v4"; - reg = <0x74a4900 0x314>, <0x74a4000 0x800>; - reg-names = "hc_mem", "core_mem"; + iommus = <&mdp_smmu 0>; - interrupts = <0 125 IRQ_TYPE_LEVEL_HIGH>, - <0 221 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "hc_irq", "pwr_irq"; + ports { + #address-cells = <1>; + #size-cells = <0>; - clock-names = "iface", "core", "xo"; - clocks = <&gcc GCC_SDCC2_AHB_CLK>, - <&gcc GCC_SDCC2_APPS_CLK>, - <&xo_board>; - bus-width = <4>; - }; + port@0 { + reg = <0>; + mdp5_intf3_out: endpoint { + remote-endpoint = <&hdmi_in>; + }; + }; + }; + }; - msmgpio: pinctrl@1010000 { - compatible = "qcom,msm8996-pinctrl"; - reg = <0x01010000 0x300000>; - interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; + hdmi: hdmi-tx@9a0000 { + compatible = "qcom,hdmi-tx-8996"; + reg = <0x009a0000 0x50c>, + <0x00070000 0x6158>, + <0x009e0000 0xfff>; + reg-names = "core_physical", + "qfprom_physical", + "hdcp_physical"; - timer@9840000 { - #address-cells = <1>; - #size-cells = <1>; - ranges; - compatible = "arm,armv7-timer-mem"; - reg = <0x09840000 0x1000>; - clock-frequency = <19200000>; + interrupt-parent = <&mdss>; + interrupts = <8 IRQ_TYPE_LEVEL_HIGH>; - frame@9850000 { - frame-number = <0>; - interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x09850000 0x1000>, - <0x09860000 0x1000>; - }; + clocks = <&mmcc MDSS_MDP_CLK>, + <&mmcc MDSS_AHB_CLK>, + <&mmcc MDSS_HDMI_CLK>, + <&mmcc MDSS_HDMI_AHB_CLK>, + <&mmcc MDSS_EXTPCLK_CLK>; + clock-names = + "mdp_core", + "iface", + "core", + "alt_iface", + "extp"; - frame@9870000 { - frame-number = <1>; - interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x09870000 0x1000>; - status = "disabled"; - }; + phys = <&hdmi_phy>; + phy-names = "hdmi_phy"; + #sound-dai-cells = <1>; - frame@9880000 { - frame-number = <2>; - interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x09880000 0x1000>; - status = "disabled"; - }; + ports { + #address-cells = <1>; + #size-cells = <0>; - frame@9890000 { - frame-number = <3>; - interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x09890000 0x1000>; - status = "disabled"; + port@0 { + reg = <0>; + hdmi_in: endpoint { + remote-endpoint = <&mdp5_intf3_out>; + }; + }; + }; }; - frame@98a0000 { - frame-number = <4>; - interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x098a0000 0x1000>; - status = "disabled"; + hdmi_phy: hdmi-phy@9a0600 { + #phy-cells = <0>; + compatible = "qcom,hdmi-phy-8996"; + reg = <0x009a0600 0x1c4>, + <0x009a0a00 0x124>, + <0x009a0c00 0x124>, + <0x009a0e00 0x124>, + <0x009a1000 0x124>, + <0x009a1200 0x0c8>; + reg-names = "hdmi_pll", + "hdmi_tx_l0", + "hdmi_tx_l1", + "hdmi_tx_l2", + "hdmi_tx_l3", + "hdmi_phy"; + + clocks = <&mmcc MDSS_AHB_CLK>, + <&gcc GCC_HDMI_CLKREF_CLK>; + clock-names = "iface", + "ref"; }; + }; + gpu@b00000 { + compatible = "qcom,adreno-530.2", "qcom,adreno"; + #stream-id-cells = <16>; - frame@98b0000 { - frame-number = <5>; - interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x098b0000 0x1000>; - status = "disabled"; + reg = <0x00b00000 0x3f000>; + reg-names = "kgsl_3d0_reg_memory"; + + interrupts = <0 300 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&mmcc GPU_GX_GFX3D_CLK>, + <&mmcc GPU_AHB_CLK>, + <&mmcc GPU_GX_RBBMTIMER_CLK>, + <&gcc GCC_BIMC_GFX_CLK>, + <&gcc GCC_MMSS_BIMC_GFX_CLK>; + + clock-names = "core", + "iface", + "rbbmtimer", + "mem", + "mem_iface"; + + power-domains = <&mmcc GPU_GDSC>; + iommus = <&adreno_smmu 0>; + + nvmem-cells = <&gpu_speed_bin>; + nvmem-cell-names = "speed_bin"; + + qcom,gpu-quirk-two-pass-use-wfi; + qcom,gpu-quirk-fault-detect-mask; + + operating-points-v2 = <&gpu_opp_table>; + + gpu_opp_table: opp-table { + compatible ="operating-points-v2"; + + /* + * 624Mhz and 560Mhz are only available on speed + * bin (1 << 0). All the rest are available on + * all bins of the hardware + */ + opp-624000000 { + opp-hz = /bits/ 64 <624000000>; + opp-supported-hw = <0x01>; + }; + opp-560000000 { + opp-hz = /bits/ 64 <560000000>; + opp-supported-hw = <0x01>; + }; + opp-510000000 { + opp-hz = /bits/ 64 <510000000>; + opp-supported-hw = <0xFF>; + }; + opp-401800000 { + opp-hz = /bits/ 64 <401800000>; + opp-supported-hw = <0xFF>; + }; + opp-315000000 { + opp-hz = /bits/ 64 <315000000>; + opp-supported-hw = <0xFF>; + }; + opp-214000000 { + opp-hz = /bits/ 64 <214000000>; + opp-supported-hw = <0xFF>; + }; + opp-133000000 { + opp-hz = /bits/ 64 <133000000>; + opp-supported-hw = <0xFF>; + }; }; - frame@98c0000 { - frame-number = <6>; - interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x098c0000 0x1000>; - status = "disabled"; + zap-shader { + memory-region = <&zap_shader_region>; }; }; + msmgpio: pinctrl@1010000 { + compatible = "qcom,msm8996-pinctrl"; + reg = <0x01010000 0x300000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + spmi_bus: qcom,spmi@400f000 { compatible = "qcom,spmi-pmic-arb"; - reg = <0x400f000 0x1000>, - <0x4400000 0x800000>, - <0x4c00000 0x800000>, - <0x5800000 0x200000>, - <0x400a000 0x002100>; + reg = <0x0400f000 0x1000>, + <0x04400000 0x800000>, + <0x04c00000 0x800000>, + <0x05800000 0x200000>, + <0x0400a000 0x002100>; reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; interrupt-names = "periph_irq"; interrupts = <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>; @@ -848,45 +718,173 @@ #interrupt-cells = <4>; }; - ufsphy: phy@627000 { - compatible = "qcom,msm8996-ufs-phy-qmp-14nm"; - reg = <0x627000 0xda8>; - reg-names = "phy_mem"; - #phy-cells = <0>; + agnoc@0 { + power-domains = <&gcc AGGRE0_NOC_GDSC>; + compatible = "simple-pm-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; - vdda-phy-supply = <&pm8994_l28>; - vdda-pll-supply = <&pm8994_l12>; + pcie0: pcie@600000 { + compatible = "qcom,pcie-msm8996", "snps,dw-pcie"; + status = "disabled"; + power-domains = <&gcc PCIE0_GDSC>; + bus-range = <0x00 0xff>; + num-lanes = <1>; - vdda-phy-max-microamp = <18380>; - vdda-pll-max-microamp = <9440>; + reg = <0x00600000 0x2000>, + <0x0c000000 0xf1d>, + <0x0c000f20 0xa8>, + <0x0c100000 0x100000>; + reg-names = "parf", "dbi", "elbi","config"; - vddp-ref-clk-supply = <&pm8994_l25>; - vddp-ref-clk-max-microamp = <100>; - vddp-ref-clk-always-on; + phys = <&pciephy_0>; + phy-names = "pciephy"; - clock-names = "ref_clk_src", "ref_clk"; - clocks = <&rpmcc RPM_SMD_LN_BB_CLK>, - <&gcc GCC_UFS_CLKREF_CLK>; - resets = <&ufshc 0>; - status = "disabled"; + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x01000000 0x0 0x0c200000 0x0c200000 0x0 0x100000>, + <0x02000000 0x0 0x0c300000 0x0c300000 0x0 0xd00000>; + + interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 244 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 245 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 247 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 248 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&pcie0_clkreq_default &pcie0_perst_default &pcie0_wake_default>; + pinctrl-1 = <&pcie0_clkreq_sleep &pcie0_perst_default &pcie0_wake_sleep>; + + linux,pci-domain = <0>; + + clocks = <&gcc GCC_PCIE_0_PIPE_CLK>, + <&gcc GCC_PCIE_0_AUX_CLK>, + <&gcc GCC_PCIE_0_CFG_AHB_CLK>, + <&gcc GCC_PCIE_0_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_AXI_CLK>; + + clock-names = "pipe", + "aux", + "cfg", + "bus_master", + "bus_slave"; + + }; + + pcie1: pcie@608000 { + compatible = "qcom,pcie-msm8996", "snps,dw-pcie"; + power-domains = <&gcc PCIE1_GDSC>; + bus-range = <0x00 0xff>; + num-lanes = <1>; + + status = "disabled"; + + reg = <0x00608000 0x2000>, + <0x0d000000 0xf1d>, + <0x0d000f20 0xa8>, + <0x0d100000 0x100000>; + + reg-names = "parf", "dbi", "elbi","config"; + + phys = <&pciephy_1>; + phy-names = "pciephy"; + + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x01000000 0x0 0x0d200000 0x0d200000 0x0 0x100000>, + <0x02000000 0x0 0x0d300000 0x0d300000 0x0 0xd00000>; + + interrupts = <GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 272 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 273 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 274 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 275 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&pcie1_clkreq_default &pcie1_perst_default &pcie1_wake_default>; + pinctrl-1 = <&pcie1_clkreq_sleep &pcie1_perst_default &pcie1_wake_sleep>; + + linux,pci-domain = <1>; + + clocks = <&gcc GCC_PCIE_1_PIPE_CLK>, + <&gcc GCC_PCIE_1_AUX_CLK>, + <&gcc GCC_PCIE_1_CFG_AHB_CLK>, + <&gcc GCC_PCIE_1_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_1_SLV_AXI_CLK>; + + clock-names = "pipe", + "aux", + "cfg", + "bus_master", + "bus_slave"; + }; + + pcie2: pcie@610000 { + compatible = "qcom,pcie-msm8996", "snps,dw-pcie"; + power-domains = <&gcc PCIE2_GDSC>; + bus-range = <0x00 0xff>; + num-lanes = <1>; + status = "disabled"; + reg = <0x00610000 0x2000>, + <0x0e000000 0xf1d>, + <0x0e000f20 0xa8>, + <0x0e100000 0x100000>; + + reg-names = "parf", "dbi", "elbi","config"; + + phys = <&pciephy_2>; + phy-names = "pciephy"; + + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x01000000 0x0 0x0e200000 0x0e200000 0x0 0x100000>, + <0x02000000 0x0 0x0e300000 0x0e300000 0x0 0x1d00000>; + + device_type = "pci"; + + interrupts = <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 142 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 143 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 144 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 145 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&pcie2_clkreq_default &pcie2_perst_default &pcie2_wake_default>; + pinctrl-1 = <&pcie2_clkreq_sleep &pcie2_perst_default &pcie2_wake_sleep >; + + linux,pci-domain = <2>; + clocks = <&gcc GCC_PCIE_2_PIPE_CLK>, + <&gcc GCC_PCIE_2_AUX_CLK>, + <&gcc GCC_PCIE_2_CFG_AHB_CLK>, + <&gcc GCC_PCIE_2_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_2_SLV_AXI_CLK>; + + clock-names = "pipe", + "aux", + "cfg", + "bus_master", + "bus_slave"; + }; }; ufshc: ufshc@624000 { compatible = "qcom,ufshc"; - reg = <0x624000 0x2500>; + reg = <0x00624000 0x2500>; interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; phys = <&ufsphy>; phy-names = "ufsphy"; - vcc-supply = <&pm8994_l20>; - vccq-supply = <&pm8994_l25>; - vccq2-supply = <&pm8994_s4>; - - vcc-max-microamp = <600000>; - vccq-max-microamp = <450000>; - vccq2-max-microamp = <450000>; - power-domains = <&gcc UFS_GDSC>; clock-names = @@ -935,266 +933,35 @@ }; }; - mmcc: clock-controller@8c0000 { - compatible = "qcom,mmcc-msm8996"; - #clock-cells = <1>; - #reset-cells = <1>; - #power-domain-cells = <1>; - reg = <0x8c0000 0x40000>; - assigned-clocks = <&mmcc MMPLL9_PLL>, - <&mmcc MMPLL1_PLL>, - <&mmcc MMPLL3_PLL>, - <&mmcc MMPLL4_PLL>, - <&mmcc MMPLL5_PLL>; - assigned-clock-rates = <624000000>, - <810000000>, - <980000000>, - <960000000>, - <825000000>; - }; - - qfprom@74000 { - compatible = "qcom,qfprom"; - reg = <0x74000 0x8ff>; - #address-cells = <1>; - #size-cells = <1>; - - qusb2p_hstx_trim: hstx_trim@24e { - reg = <0x24e 0x2>; - bits = <5 4>; - }; - - qusb2s_hstx_trim: hstx_trim@24f { - reg = <0x24f 0x1>; - bits = <1 4>; - }; - - gpu_speed_bin: gpu_speed_bin@133 { - reg = <0x133 0x1>; - bits = <5 3>; - }; - }; - - phy@34000 { - compatible = "qcom,msm8996-qmp-pcie-phy"; - reg = <0x34000 0x488>; - #clock-cells = <1>; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>, - <&gcc GCC_PCIE_PHY_CFG_AHB_CLK>, - <&gcc GCC_PCIE_CLKREF_CLK>; - clock-names = "aux", "cfg_ahb", "ref"; - - vdda-phy-supply = <&pm8994_l28>; - vdda-pll-supply = <&pm8994_l12>; - - resets = <&gcc GCC_PCIE_PHY_BCR>, - <&gcc GCC_PCIE_PHY_COM_BCR>, - <&gcc GCC_PCIE_PHY_COM_NOCSR_BCR>; - reset-names = "phy", "common", "cfg"; - status = "disabled"; - - pciephy_0: lane@35000 { - reg = <0x035000 0x130>, - <0x035200 0x200>, - <0x035400 0x1dc>; - #phy-cells = <0>; - - clock-output-names = "pcie_0_pipe_clk_src"; - clocks = <&gcc GCC_PCIE_0_PIPE_CLK>; - clock-names = "pipe0"; - resets = <&gcc GCC_PCIE_0_PHY_BCR>; - reset-names = "lane0"; - }; - - pciephy_1: lane@36000 { - reg = <0x036000 0x130>, - <0x036200 0x200>, - <0x036400 0x1dc>; - #phy-cells = <0>; - - clock-output-names = "pcie_1_pipe_clk_src"; - clocks = <&gcc GCC_PCIE_1_PIPE_CLK>; - clock-names = "pipe1"; - resets = <&gcc GCC_PCIE_1_PHY_BCR>; - reset-names = "lane1"; - }; - - pciephy_2: lane@37000 { - reg = <0x037000 0x130>, - <0x037200 0x200>, - <0x037400 0x1dc>; - #phy-cells = <0>; - - clock-output-names = "pcie_2_pipe_clk_src"; - clocks = <&gcc GCC_PCIE_2_PIPE_CLK>; - clock-names = "pipe2"; - resets = <&gcc GCC_PCIE_2_PHY_BCR>; - reset-names = "lane2"; - }; - }; - - phy@7410000 { - compatible = "qcom,msm8996-qmp-usb3-phy"; - reg = <0x7410000 0x1c4>; - #clock-cells = <1>; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - clocks = <&gcc GCC_USB3_PHY_AUX_CLK>, - <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, - <&gcc GCC_USB3_CLKREF_CLK>; - clock-names = "aux", "cfg_ahb", "ref"; - - vdda-phy-supply = <&pm8994_l28>; - vdda-pll-supply = <&pm8994_l12>; - - resets = <&gcc GCC_USB3_PHY_BCR>, - <&gcc GCC_USB3PHY_PHY_BCR>; - reset-names = "phy", "common"; - status = "disabled"; - - ssusb_phy_0: lane@7410200 { - reg = <0x7410200 0x200>, - <0x7410400 0x130>, - <0x7410600 0x1a8>; - #phy-cells = <0>; - - clock-output-names = "usb3_phy_pipe_clk_src"; - clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>; - clock-names = "pipe0"; - }; - }; - - hsusb_phy1: phy@7411000 { - compatible = "qcom,msm8996-qusb2-phy"; - reg = <0x7411000 0x180>; - #phy-cells = <0>; - - clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, - <&gcc GCC_RX1_USB2_CLKREF_CLK>; - clock-names = "cfg_ahb", "ref"; - - vdda-pll-supply = <&pm8994_l12>; - vdda-phy-dpdm-supply = <&pm8994_l24>; - - resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; - nvmem-cells = <&qusb2p_hstx_trim>; - status = "disabled"; - }; - - hsusb_phy2: phy@7412000 { - compatible = "qcom,msm8996-qusb2-phy"; - reg = <0x7412000 0x180>; + ufsphy: phy@627000 { + compatible = "qcom,msm8996-ufs-phy-qmp-14nm"; + reg = <0x00627000 0xda8>; + reg-names = "phy_mem"; #phy-cells = <0>; - clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, - <&gcc GCC_RX2_USB2_CLKREF_CLK>; - clock-names = "cfg_ahb", "ref"; - - vdda-pll-supply = <&pm8994_l12>; - vdda-phy-dpdm-supply = <&pm8994_l24>; - - resets = <&gcc GCC_QUSB2PHY_SEC_BCR>; - nvmem-cells = <&qusb2s_hstx_trim>; - status = "disabled"; - }; - - usb2: usb@76f8800 { - compatible = "qcom,msm8996-dwc3", "qcom,dwc3"; - reg = <0x76f8800 0x400>; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - clocks = <&gcc GCC_PERIPH_NOC_USB20_AHB_CLK>, - <&gcc GCC_USB20_MASTER_CLK>, - <&gcc GCC_USB20_MOCK_UTMI_CLK>, - <&gcc GCC_USB20_SLEEP_CLK>, - <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>; - - assigned-clocks = <&gcc GCC_USB20_MOCK_UTMI_CLK>, - <&gcc GCC_USB20_MASTER_CLK>; - assigned-clock-rates = <19200000>, <60000000>; - - power-domains = <&gcc USB30_GDSC>; - status = "disabled"; - - dwc3@7600000 { - compatible = "snps,dwc3"; - reg = <0x7600000 0xcc00>; - interrupts = <0 138 IRQ_TYPE_LEVEL_HIGH>; - phys = <&hsusb_phy2>; - phy-names = "usb2-phy"; - }; - }; - - usb3: usb@6af8800 { - compatible = "qcom,msm8996-dwc3", "qcom,dwc3"; - reg = <0x6af8800 0x400>; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - clocks = <&gcc GCC_SYS_NOC_USB3_AXI_CLK>, - <&gcc GCC_USB30_MASTER_CLK>, - <&gcc GCC_AGGRE2_USB3_AXI_CLK>, - <&gcc GCC_USB30_MOCK_UTMI_CLK>, - <&gcc GCC_USB30_SLEEP_CLK>, - <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>; - - assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>, - <&gcc GCC_USB30_MASTER_CLK>; - assigned-clock-rates = <19200000>, <120000000>; - - power-domains = <&gcc USB30_GDSC>; + clock-names = "ref_clk_src", "ref_clk"; + clocks = <&rpmcc RPM_SMD_LN_BB_CLK>, + <&gcc GCC_UFS_CLKREF_CLK>; + resets = <&ufshc 0>; status = "disabled"; - - dwc3@6a00000 { - compatible = "snps,dwc3"; - reg = <0x6a00000 0xcc00>; - interrupts = <0 131 IRQ_TYPE_LEVEL_HIGH>; - phys = <&hsusb_phy1>, <&ssusb_phy_0>; - phy-names = "usb2-phy", "usb3-phy"; - }; - }; - - vfe_smmu: arm,smmu@da0000 { - compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2"; - reg = <0xda0000 0x10000>; - - #global-interrupts = <1>; - interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>; - power-domains = <&mmcc MMAGIC_CAMSS_GDSC>; - clocks = <&mmcc SMMU_VFE_AHB_CLK>, - <&mmcc SMMU_VFE_AXI_CLK>; - clock-names = "iface", - "bus"; - #iommu-cells = <1>; }; camss: camss@a00000 { compatible = "qcom,msm8996-camss"; - reg = <0xa34000 0x1000>, - <0xa00030 0x4>, - <0xa35000 0x1000>, - <0xa00038 0x4>, - <0xa36000 0x1000>, - <0xa00040 0x4>, - <0xa30000 0x100>, - <0xa30400 0x100>, - <0xa30800 0x100>, - <0xa30c00 0x100>, - <0xa31000 0x500>, - <0xa00020 0x10>, - <0xa10000 0x1000>, - <0xa14000 0x1000>; + reg = <0x00a34000 0x1000>, + <0x00a00030 0x4>, + <0x00a35000 0x1000>, + <0x00a00038 0x4>, + <0x00a36000 0x1000>, + <0x00a00040 0x4>, + <0x00a30000 0x100>, + <0x00a30400 0x100>, + <0x00a30800 0x100>, + <0x00a30c00 0x100>, + <0x00a31000 0x500>, + <0x00a00020 0x10>, + <0x00a10000 0x1000>, + <0x00a14000 0x1000>; reg-names = "csiphy0", "csiphy0_clk_mux", "csiphy1", @@ -1302,7 +1069,6 @@ "vfe1_stream", "vfe_ahb", "vfe_axi"; - vdda-supply = <&pm8994_l2>; iommus = <&vfe_smmu 0>, <&vfe_smmu 1>, <&vfe_smmu 2>, @@ -1314,9 +1080,9 @@ }; }; - adreno_smmu: arm,smmu@b40000 { + adreno_smmu: iommu@b40000 { compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2"; - reg = <0xb40000 0x10000>; + reg = <0x00b40000 0x10000>; #global-interrupts = <1>; interrupts = <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>, @@ -1331,9 +1097,57 @@ power-domains = <&mmcc GPU_GDSC>; }; - mdp_smmu: arm,smmu@d00000 { + video-codec@c00000 { + compatible = "qcom,msm8996-venus"; + reg = <0x00c00000 0xff000>; + interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&mmcc VENUS_GDSC>; + clocks = <&mmcc VIDEO_CORE_CLK>, + <&mmcc VIDEO_AHB_CLK>, + <&mmcc VIDEO_AXI_CLK>, + <&mmcc VIDEO_MAXI_CLK>; + clock-names = "core", "iface", "bus", "mbus"; + iommus = <&venus_smmu 0x00>, + <&venus_smmu 0x01>, + <&venus_smmu 0x0a>, + <&venus_smmu 0x07>, + <&venus_smmu 0x0e>, + <&venus_smmu 0x0f>, + <&venus_smmu 0x08>, + <&venus_smmu 0x09>, + <&venus_smmu 0x0b>, + <&venus_smmu 0x0c>, + <&venus_smmu 0x0d>, + <&venus_smmu 0x10>, + <&venus_smmu 0x11>, + <&venus_smmu 0x21>, + <&venus_smmu 0x28>, + <&venus_smmu 0x29>, + <&venus_smmu 0x2b>, + <&venus_smmu 0x2c>, + <&venus_smmu 0x2d>, + <&venus_smmu 0x31>; + memory-region = <&venus_region>; + status = "okay"; + + video-decoder { + compatible = "venus-decoder"; + clocks = <&mmcc VIDEO_SUBCORE0_CLK>; + clock-names = "core"; + power-domains = <&mmcc VENUS_CORE0_GDSC>; + }; + + video-encoder { + compatible = "venus-encoder"; + clocks = <&mmcc VIDEO_SUBCORE1_CLK>; + clock-names = "core"; + power-domains = <&mmcc VENUS_CORE1_GDSC>; + }; + }; + + mdp_smmu: iommu@d00000 { compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2"; - reg = <0xd00000 0x10000>; + reg = <0x00d00000 0x10000>; #global-interrupts = <1>; interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>, @@ -1347,9 +1161,45 @@ power-domains = <&mmcc MDSS_GDSC>; }; - lpass_q6_smmu: arm,smmu-lpass_q6@1600000 { + venus_smmu: iommu@d40000 { compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2"; - reg = <0x1600000 0x20000>; + reg = <0x00d40000 0x20000>; + #global-interrupts = <1>; + interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&mmcc MMAGIC_VIDEO_GDSC>; + clocks = <&mmcc SMMU_VIDEO_AHB_CLK>, + <&mmcc SMMU_VIDEO_AXI_CLK>; + clock-names = "iface", "bus"; + #iommu-cells = <1>; + status = "okay"; + }; + + vfe_smmu: iommu@da0000 { + compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2"; + reg = <0x00da0000 0x10000>; + + #global-interrupts = <1>; + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&mmcc MMAGIC_CAMSS_GDSC>; + clocks = <&mmcc SMMU_VFE_AHB_CLK>, + <&mmcc SMMU_VFE_AXI_CLK>; + clock-names = "iface", + "bus"; + #iommu-cells = <1>; + }; + + lpass_q6_smmu: iommu@1600000 { + compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2"; + reg = <0x01600000 0x20000>; #iommu-cells = <1>; power-domains = <&gcc HLOS1_VOTE_LPASS_CORE_GDSC>; @@ -1373,177 +1223,726 @@ clock-names = "iface", "bus"; }; - agnoc@0 { - power-domains = <&gcc AGGRE0_NOC_GDSC>; - compatible = "simple-pm-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges; + stm@3002000 { + compatible = "arm,coresight-stm", "arm,primecell"; + reg = <0x3002000 0x1000>, + <0x8280000 0x180000>; + reg-names = "stm-base", "stm-stimulus-base"; - pcie0: pcie@600000 { - compatible = "qcom,pcie-msm8996", "snps,dw-pcie"; - status = "disabled"; - power-domains = <&gcc PCIE0_GDSC>; - bus-range = <0x00 0xff>; - num-lanes = <1>; + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; - reg = <0x00600000 0x2000>, - <0x0c000000 0xf1d>, - <0x0c000f20 0xa8>, - <0x0c100000 0x100000>; - reg-names = "parf", "dbi", "elbi","config"; + out-ports { + port { + stm_out: endpoint { + remote-endpoint = + <&funnel0_in>; + }; + }; + }; + }; - phys = <&pciephy_0>; - phy-names = "pciephy"; + tpiu@3020000 { + compatible = "arm,coresight-tpiu", "arm,primecell"; + reg = <0x3020000 0x1000>; - #address-cells = <3>; - #size-cells = <2>; - ranges = <0x01000000 0x0 0x0c200000 0x0c200000 0x0 0x100000>, - <0x02000000 0x0 0x0c300000 0x0c300000 0x0 0xd00000>; + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; - interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "msi"; - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0x7>; - interrupt-map = <0 0 0 1 &intc 0 244 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ - <0 0 0 2 &intc 0 245 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ - <0 0 0 3 &intc 0 247 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ - <0 0 0 4 &intc 0 248 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + in-ports { + port { + tpiu_in: endpoint { + remote-endpoint = + <&replicator_out1>; + }; + }; + }; + }; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&pcie0_clkreq_default &pcie0_perst_default &pcie0_wake_default>; - pinctrl-1 = <&pcie0_clkreq_sleep &pcie0_perst_default &pcie0_wake_sleep>; + funnel@3021000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x3021000 0x1000>; + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; - vdda-supply = <&pm8994_l28>; + in-ports { + #address-cells = <1>; + #size-cells = <0>; - linux,pci-domain = <0>; + port@7 { + reg = <7>; + funnel0_in: endpoint { + remote-endpoint = + <&stm_out>; + }; + }; + }; - clocks = <&gcc GCC_PCIE_0_PIPE_CLK>, - <&gcc GCC_PCIE_0_AUX_CLK>, - <&gcc GCC_PCIE_0_CFG_AHB_CLK>, - <&gcc GCC_PCIE_0_MSTR_AXI_CLK>, - <&gcc GCC_PCIE_0_SLV_AXI_CLK>; + out-ports { + port { + funnel0_out: endpoint { + remote-endpoint = + <&merge_funnel_in0>; + }; + }; + }; + }; - clock-names = "pipe", - "aux", - "cfg", - "bus_master", - "bus_slave"; + funnel@3022000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x3022000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@6 { + reg = <6>; + funnel1_in: endpoint { + remote-endpoint = + <&apss_merge_funnel_out>; + }; + }; }; - pcie1: pcie@608000 { - compatible = "qcom,pcie-msm8996", "snps,dw-pcie"; - power-domains = <&gcc PCIE1_GDSC>; - bus-range = <0x00 0xff>; - num-lanes = <1>; + out-ports { + port { + funnel1_out: endpoint { + remote-endpoint = + <&merge_funnel_in1>; + }; + }; + }; + }; - status = "disabled"; + funnel@3023000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x3023000 0x1000>; - reg = <0x00608000 0x2000>, - <0x0d000000 0xf1d>, - <0x0d000f20 0xa8>, - <0x0d100000 0x100000>; + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; - reg-names = "parf", "dbi", "elbi","config"; - phys = <&pciephy_1>; - phy-names = "pciephy"; + out-ports { + port { + funnel2_out: endpoint { + remote-endpoint = + <&merge_funnel_in2>; + }; + }; + }; + }; - #address-cells = <3>; - #size-cells = <2>; - ranges = <0x01000000 0x0 0x0d200000 0x0d200000 0x0 0x100000>, - <0x02000000 0x0 0x0d300000 0x0d300000 0x0 0xd00000>; + funnel@3025000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x3025000 0x1000>; - interrupts = <GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "msi"; - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0x7>; - interrupt-map = <0 0 0 1 &intc 0 272 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ - <0 0 0 2 &intc 0 273 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ - <0 0 0 3 &intc 0 274 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ - <0 0 0 4 &intc 0 275 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&pcie1_clkreq_default &pcie1_perst_default &pcie1_wake_default>; - pinctrl-1 = <&pcie1_clkreq_sleep &pcie1_perst_default &pcie1_wake_sleep>; + in-ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + merge_funnel_in0: endpoint { + remote-endpoint = + <&funnel0_out>; + }; + }; - vdda-supply = <&pm8994_l28>; - linux,pci-domain = <1>; + port@1 { + reg = <1>; + merge_funnel_in1: endpoint { + remote-endpoint = + <&funnel1_out>; + }; + }; - clocks = <&gcc GCC_PCIE_1_PIPE_CLK>, - <&gcc GCC_PCIE_1_AUX_CLK>, - <&gcc GCC_PCIE_1_CFG_AHB_CLK>, - <&gcc GCC_PCIE_1_MSTR_AXI_CLK>, - <&gcc GCC_PCIE_1_SLV_AXI_CLK>; + port@2 { + reg = <2>; + merge_funnel_in2: endpoint { + remote-endpoint = + <&funnel2_out>; + }; + }; + }; - clock-names = "pipe", - "aux", - "cfg", - "bus_master", - "bus_slave"; + out-ports { + port { + merge_funnel_out: endpoint { + remote-endpoint = + <&etf_in>; + }; + }; }; + }; - pcie2: pcie@610000 { - compatible = "qcom,pcie-msm8996", "snps,dw-pcie"; - power-domains = <&gcc PCIE2_GDSC>; - bus-range = <0x00 0xff>; - num-lanes = <1>; - status = "disabled"; - reg = <0x00610000 0x2000>, - <0x0e000000 0xf1d>, - <0x0e000f20 0xa8>, - <0x0e100000 0x100000>; + replicator@3026000 { + compatible = "arm,coresight-dynamic-replicator", "arm,primecell"; + reg = <0x3026000 0x1000>; - reg-names = "parf", "dbi", "elbi","config"; + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; - phys = <&pciephy_2>; - phy-names = "pciephy"; + in-ports { + port { + replicator_in: endpoint { + remote-endpoint = + <&etf_out>; + }; + }; + }; - #address-cells = <3>; - #size-cells = <2>; - ranges = <0x01000000 0x0 0x0e200000 0x0e200000 0x0 0x100000>, - <0x02000000 0x0 0x0e300000 0x0e300000 0x0 0x1d00000>; + out-ports { + #address-cells = <1>; + #size-cells = <0>; - device_type = "pci"; + port@0 { + reg = <0>; + replicator_out0: endpoint { + remote-endpoint = + <&etr_in>; + }; + }; - interrupts = <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "msi"; - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0x7>; - interrupt-map = <0 0 0 1 &intc 0 142 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ - <0 0 0 2 &intc 0 143 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ - <0 0 0 3 &intc 0 144 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ - <0 0 0 4 &intc 0 145 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + port@1 { + reg = <1>; + replicator_out1: endpoint { + remote-endpoint = + <&tpiu_in>; + }; + }; + }; + }; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&pcie2_clkreq_default &pcie2_perst_default &pcie2_wake_default>; - pinctrl-1 = <&pcie2_clkreq_sleep &pcie2_perst_default &pcie2_wake_sleep >; + etf@3027000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0x3027000 0x1000>; - vdda-supply = <&pm8994_l28>; + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; - linux,pci-domain = <2>; - clocks = <&gcc GCC_PCIE_2_PIPE_CLK>, - <&gcc GCC_PCIE_2_AUX_CLK>, - <&gcc GCC_PCIE_2_CFG_AHB_CLK>, - <&gcc GCC_PCIE_2_MSTR_AXI_CLK>, - <&gcc GCC_PCIE_2_SLV_AXI_CLK>; + in-ports { + port { + etf_in: endpoint { + remote-endpoint = + <&merge_funnel_out>; + }; + }; + }; - clock-names = "pipe", - "aux", - "cfg", - "bus_master", - "bus_slave"; + out-ports { + port { + etf_out: endpoint { + remote-endpoint = + <&replicator_in>; + }; + }; + }; + }; + + etr@3028000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0x3028000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + arm,scatter-gather; + + in-ports { + port { + etr_in: endpoint { + remote-endpoint = + <&replicator_out0>; + }; + }; + }; + }; + + debug@3810000 { + compatible = "arm,coresight-cpu-debug", "arm,primecell"; + reg = <0x3810000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>; + clock-names = "apb_pclk"; + + cpu = <&CPU0>; + }; + + etm@3840000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0x3840000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + cpu = <&CPU0>; + + out-ports { + port { + etm0_out: endpoint { + remote-endpoint = + <&apss_funnel0_in0>; + }; + }; + }; + }; + + debug@3910000 { + compatible = "arm,coresight-cpu-debug", "arm,primecell"; + reg = <0x3910000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>; + clock-names = "apb_pclk"; + + cpu = <&CPU1>; + }; + + etm@3940000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0x3940000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + cpu = <&CPU1>; + + out-ports { + port { + etm1_out: endpoint { + remote-endpoint = + <&apss_funnel0_in1>; + }; + }; + }; + }; + + funnel@39b0000 { /* APSS Funnel 0 */ + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x39b0000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + apss_funnel0_in0: endpoint { + remote-endpoint = <&etm0_out>; + }; + }; + + port@1 { + reg = <1>; + apss_funnel0_in1: endpoint { + remote-endpoint = <&etm1_out>; + }; + }; + }; + + out-ports { + port { + apss_funnel0_out: endpoint { + remote-endpoint = + <&apss_merge_funnel_in0>; + }; + }; + }; + }; + + debug@3a10000 { + compatible = "arm,coresight-cpu-debug", "arm,primecell"; + reg = <0x3a10000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>; + clock-names = "apb_pclk"; + + cpu = <&CPU2>; + }; + + etm@3a40000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0x3a40000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + cpu = <&CPU2>; + + out-ports { + port { + etm2_out: endpoint { + remote-endpoint = + <&apss_funnel1_in0>; + }; + }; + }; + }; + + debug@3b10000 { + compatible = "arm,coresight-cpu-debug", "arm,primecell"; + reg = <0x3b10000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>; + clock-names = "apb_pclk"; + + cpu = <&CPU3>; + }; + + etm@3b40000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0x3b40000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + cpu = <&CPU3>; + + out-ports { + port { + etm3_out: endpoint { + remote-endpoint = + <&apss_funnel1_in1>; + }; + }; }; }; - slimbam:dma@9184000 - { + funnel@3bb0000 { /* APSS Funnel 1 */ + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x3bb0000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + apss_funnel1_in0: endpoint { + remote-endpoint = <&etm2_out>; + }; + }; + + port@1 { + reg = <1>; + apss_funnel1_in1: endpoint { + remote-endpoint = <&etm3_out>; + }; + }; + }; + + out-ports { + port { + apss_funnel1_out: endpoint { + remote-endpoint = + <&apss_merge_funnel_in1>; + }; + }; + }; + }; + + funnel@3bc0000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x3bc0000 0x1000>; + + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + apss_merge_funnel_in0: endpoint { + remote-endpoint = + <&apss_funnel0_out>; + }; + }; + + port@1 { + reg = <1>; + apss_merge_funnel_in1: endpoint { + remote-endpoint = + <&apss_funnel1_out>; + }; + }; + }; + + out-ports { + port { + apss_merge_funnel_out: endpoint { + remote-endpoint = + <&funnel1_in>; + }; + }; + }; + }; + kryocc: clock-controller@6400000 { + compatible = "qcom,apcc-msm8996"; + reg = <0x06400000 0x90000>; + #clock-cells = <1>; + }; + + usb3: usb@6af8800 { + compatible = "qcom,msm8996-dwc3", "qcom,dwc3"; + reg = <0x06af8800 0x400>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + clocks = <&gcc GCC_SYS_NOC_USB3_AXI_CLK>, + <&gcc GCC_USB30_MASTER_CLK>, + <&gcc GCC_AGGRE2_USB3_AXI_CLK>, + <&gcc GCC_USB30_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_SLEEP_CLK>, + <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>; + + assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_MASTER_CLK>; + assigned-clock-rates = <19200000>, <120000000>; + + power-domains = <&gcc USB30_GDSC>; + status = "disabled"; + + dwc3@6a00000 { + compatible = "snps,dwc3"; + reg = <0x06a00000 0xcc00>; + interrupts = <0 131 IRQ_TYPE_LEVEL_HIGH>; + phys = <&hsusb_phy1>, <&ssusb_phy_0>; + phy-names = "usb2-phy", "usb3-phy"; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + }; + }; + + usb3phy: phy@7410000 { + compatible = "qcom,msm8996-qmp-usb3-phy"; + reg = <0x07410000 0x1c4>; + #clock-cells = <1>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + clocks = <&gcc GCC_USB3_PHY_AUX_CLK>, + <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, + <&gcc GCC_USB3_CLKREF_CLK>; + clock-names = "aux", "cfg_ahb", "ref"; + + resets = <&gcc GCC_USB3_PHY_BCR>, + <&gcc GCC_USB3PHY_PHY_BCR>; + reset-names = "phy", "common"; + status = "disabled"; + + ssusb_phy_0: lane@7410200 { + reg = <0x07410200 0x200>, + <0x07410400 0x130>, + <0x07410600 0x1a8>; + #phy-cells = <0>; + + clock-output-names = "usb3_phy_pipe_clk_src"; + clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>; + clock-names = "pipe0"; + }; + }; + + hsusb_phy1: phy@7411000 { + compatible = "qcom,msm8996-qusb2-phy"; + reg = <0x07411000 0x180>; + #phy-cells = <0>; + + clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, + <&gcc GCC_RX1_USB2_CLKREF_CLK>; + clock-names = "cfg_ahb", "ref"; + + resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; + nvmem-cells = <&qusb2p_hstx_trim>; + status = "disabled"; + }; + + hsusb_phy2: phy@7412000 { + compatible = "qcom,msm8996-qusb2-phy"; + reg = <0x07412000 0x180>; + #phy-cells = <0>; + + clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, + <&gcc GCC_RX2_USB2_CLKREF_CLK>; + clock-names = "cfg_ahb", "ref"; + + resets = <&gcc GCC_QUSB2PHY_SEC_BCR>; + nvmem-cells = <&qusb2s_hstx_trim>; + status = "disabled"; + }; + + sdhc2: sdhci@74a4900 { + status = "disabled"; + compatible = "qcom,sdhci-msm-v4"; + reg = <0x074a4900 0x314>, <0x074a4000 0x800>; + reg-names = "hc_mem", "core_mem"; + + interrupts = <0 125 IRQ_TYPE_LEVEL_HIGH>, + <0 221 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + + clock-names = "iface", "core", "xo"; + clocks = <&gcc GCC_SDCC2_AHB_CLK>, + <&gcc GCC_SDCC2_APPS_CLK>, + <&xo_board>; + bus-width = <4>; + }; + + blsp1_uart1: serial@7570000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x07570000 0x1000>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + blsp1_spi0: spi@7575000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x07575000 0x600>; + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp1_spi0_default>; + pinctrl-1 = <&blsp1_spi0_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp1_i2c2: i2c@7577000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x07577000 0x1000>; + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_AHB_CLK>, + <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>; + clock-names = "iface", "core"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp1_i2c2_default>; + pinctrl-1 = <&blsp1_i2c2_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp2_uart1: serial@75b0000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x075b0000 0x1000>; + interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + blsp2_uart2: serial@75b1000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x075b1000 0x1000>; + interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP2_UART3_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + blsp2_i2c0: i2c@75b5000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x075b5000 0x1000>; + interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP2_AHB_CLK>, + <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>; + clock-names = "iface", "core"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp2_i2c0_default>; + pinctrl-1 = <&blsp2_i2c0_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp2_i2c1: i2c@75b6000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x075b6000 0x1000>; + interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP2_AHB_CLK>, + <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>; + clock-names = "iface", "core"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp2_i2c1_default>; + pinctrl-1 = <&blsp2_i2c1_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp2_spi5: spi@75ba000{ + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x075ba000 0x600>; + interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP2_QUP6_SPI_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp2_spi5_default>; + pinctrl-1 = <&blsp2_spi5_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + usb2: usb@76f8800 { + compatible = "qcom,msm8996-dwc3", "qcom,dwc3"; + reg = <0x076f8800 0x400>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + clocks = <&gcc GCC_PERIPH_NOC_USB20_AHB_CLK>, + <&gcc GCC_USB20_MASTER_CLK>, + <&gcc GCC_USB20_MOCK_UTMI_CLK>, + <&gcc GCC_USB20_SLEEP_CLK>, + <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>; + + assigned-clocks = <&gcc GCC_USB20_MOCK_UTMI_CLK>, + <&gcc GCC_USB20_MASTER_CLK>; + assigned-clock-rates = <19200000>, <60000000>; + + power-domains = <&gcc USB30_GDSC>; + status = "disabled"; + + dwc3@7600000 { + compatible = "snps,dwc3"; + reg = <0x07600000 0xcc00>; + interrupts = <0 138 IRQ_TYPE_LEVEL_HIGH>; + phys = <&hsusb_phy2>; + phy-names = "usb2-phy"; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + }; + }; + + slimbam: dma@9184000 { compatible = "qcom,bam-v1.7.0"; qcom,controlled-remotely; - reg = <0x9184000 0x32000>; + reg = <0x09184000 0x32000>; num-channels = <31>; interrupts = <0 164 IRQ_TYPE_LEVEL_HIGH>; #dma-cells = <1>; @@ -1553,7 +1952,7 @@ slim_msm: slim@91c0000 { compatible = "qcom,slim-ngd-v1.5.0"; - reg = <0x91c0000 0x2C000>; + reg = <0x091c0000 0x2C000>; reg-names = "ctrl"; interrupts = <0 163 IRQ_TYPE_LEVEL_HIGH>; dmas = <&slimbam 3>, <&slimbam 4>, @@ -1588,365 +1987,418 @@ slim-ifc-dev = <&tasha_ifd>; - vdd-buck-supply = <&pm8994_s4>; - vdd-buck-sido-supply = <&pm8994_s4>; - vdd-tx-supply = <&pm8994_s4>; - vdd-rx-supply = <&pm8994_s4>; - vdd-io-supply = <&pm8994_s4>; - #sound-dai-cells = <1>; }; }; }; - gpu@b00000 { - compatible = "qcom,adreno-530.2", "qcom,adreno"; - #stream-id-cells = <16>; + adsp_pil: remoteproc@9300000 { + compatible = "qcom,msm8996-adsp-pil"; + reg = <0x09300000 0x80000>; - reg = <0xb00000 0x3f000>; - reg-names = "kgsl_3d0_reg_memory"; + interrupts-extended = <&intc 0 162 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; - interrupts = <0 300 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&xo_board>; + clock-names = "xo"; - clocks = <&mmcc GPU_GX_GFX3D_CLK>, - <&mmcc GPU_AHB_CLK>, - <&mmcc GPU_GX_RBBMTIMER_CLK>, - <&gcc GCC_BIMC_GFX_CLK>, - <&gcc GCC_MMSS_BIMC_GFX_CLK>; + memory-region = <&adsp_region>; - clock-names = "core", - "iface", - "rbbmtimer", - "mem", - "mem_iface"; + qcom,smem-states = <&smp2p_adsp_out 0>; + qcom,smem-state-names = "stop"; - power-domains = <&mmcc GPU_GDSC>; - iommus = <&adreno_smmu 0>; + smd-edge { + interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>; - nvmem-cells = <&gpu_speed_bin>; - nvmem-cell-names = "speed_bin"; + label = "lpass"; + mboxes = <&apcs_glb 8>; + qcom,smd-edge = <1>; + qcom,remote-pid = <2>; + #address-cells = <1>; + #size-cells = <0>; + apr { + power-domains = <&gcc HLOS1_VOTE_LPASS_ADSP_GDSC>; + compatible = "qcom,apr-v2"; + qcom,smd-channels = "apr_audio_svc"; + qcom,apr-domain = <APR_DOMAIN_ADSP>; + #address-cells = <1>; + #size-cells = <0>; - qcom,gpu-quirk-two-pass-use-wfi; - qcom,gpu-quirk-fault-detect-mask; + q6core { + reg = <APR_SVC_ADSP_CORE>; + compatible = "qcom,q6core"; + }; - operating-points-v2 = <&gpu_opp_table>; + q6afe: q6afe { + compatible = "qcom,q6afe"; + reg = <APR_SVC_AFE>; + q6afedai: dais { + compatible = "qcom,q6afe-dais"; + #address-cells = <1>; + #size-cells = <0>; + #sound-dai-cells = <1>; + hdmi@1 { + reg = <1>; + }; + }; + }; - gpu_opp_table: opp-table { - compatible ="operating-points-v2"; + q6asm: q6asm { + compatible = "qcom,q6asm"; + reg = <APR_SVC_ASM>; + q6asmdai: dais { + compatible = "qcom,q6asm-dais"; + #sound-dai-cells = <1>; + iommus = <&lpass_q6_smmu 1>; + }; + }; - /* - * 624Mhz and 560Mhz are only available on speed - * bin (1 << 0). All the rest are available on - * all bins of the hardware - */ - opp-624000000 { - opp-hz = /bits/ 64 <624000000>; - opp-supported-hw = <0x01>; - }; - opp-560000000 { - opp-hz = /bits/ 64 <560000000>; - opp-supported-hw = <0x01>; - }; - opp-510000000 { - opp-hz = /bits/ 64 <510000000>; - opp-supported-hw = <0xFF>; - }; - opp-401800000 { - opp-hz = /bits/ 64 <401800000>; - opp-supported-hw = <0xFF>; - }; - opp-315000000 { - opp-hz = /bits/ 64 <315000000>; - opp-supported-hw = <0xFF>; - }; - opp-214000000 { - opp-hz = /bits/ 64 <214000000>; - opp-supported-hw = <0xFF>; - }; - opp-133000000 { - opp-hz = /bits/ 64 <133000000>; - opp-supported-hw = <0xFF>; + q6adm: q6adm { + compatible = "qcom,q6adm"; + reg = <APR_SVC_ADM>; + q6routing: routing { + compatible = "qcom,q6adm-routing"; + #sound-dai-cells = <0>; + }; + }; }; - }; - zap-shader { - memory-region = <&zap_shader_region>; }; }; - mdss: mdss@900000 { - compatible = "qcom,mdss"; - - reg = <0x900000 0x1000>, - <0x9b0000 0x1040>, - <0x9b8000 0x1040>; - reg-names = "mdss_phys", - "vbif_phys", - "vbif_nrt_phys"; - - power-domains = <&mmcc MDSS_GDSC>; - interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; - - interrupt-controller; - #interrupt-cells = <1>; + apcs_glb: mailbox@9820000 { + compatible = "qcom,msm8996-apcs-hmss-global"; + reg = <0x09820000 0x1000>; - clocks = <&mmcc MDSS_AHB_CLK>; - clock-names = "iface"; + #mbox-cells = <1>; + }; + timer@9840000 { #address-cells = <1>; #size-cells = <1>; ranges; + compatible = "arm,armv7-timer-mem"; + reg = <0x09840000 0x1000>; + clock-frequency = <19200000>; - mdp: mdp@901000 { - compatible = "qcom,mdp5"; - reg = <0x901000 0x90000>; - reg-names = "mdp_phys"; + frame@9850000 { + frame-number = <0>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x09850000 0x1000>, + <0x09860000 0x1000>; + }; - interrupt-parent = <&mdss>; - interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + frame@9870000 { + frame-number = <1>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x09870000 0x1000>; + status = "disabled"; + }; - clocks = <&mmcc MDSS_AHB_CLK>, - <&mmcc MDSS_AXI_CLK>, - <&mmcc MDSS_MDP_CLK>, - <&mmcc SMMU_MDP_AXI_CLK>, - <&mmcc MDSS_VSYNC_CLK>; - clock-names = "iface", - "bus", - "core", - "iommu", - "vsync"; + frame@9880000 { + frame-number = <2>; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x09880000 0x1000>; + status = "disabled"; + }; - iommus = <&mdp_smmu 0>; + frame@9890000 { + frame-number = <3>; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x09890000 0x1000>; + status = "disabled"; + }; - ports { - #address-cells = <1>; - #size-cells = <0>; + frame@98a0000 { + frame-number = <4>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x098a0000 0x1000>; + status = "disabled"; + }; - port@0 { - reg = <0>; - mdp5_intf3_out: endpoint { - remote-endpoint = <&hdmi_in>; - }; - }; - }; + frame@98b0000 { + frame-number = <5>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x098b0000 0x1000>; + status = "disabled"; }; - hdmi: hdmi-tx@9a0000 { - compatible = "qcom,hdmi-tx-8996"; - reg = <0x009a0000 0x50c>, - <0x00070000 0x6158>, - <0x009e0000 0xfff>; - reg-names = "core_physical", - "qfprom_physical", - "hdcp_physical"; + frame@98c0000 { + frame-number = <6>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x098c0000 0x1000>; + status = "disabled"; + }; + }; - interrupt-parent = <&mdss>; - interrupts = <8 IRQ_TYPE_LEVEL_HIGH>; + saw3: syscon@9a10000 { + compatible = "syscon"; + reg = <0x09a10000 0x1000>; + }; - clocks = <&mmcc MDSS_MDP_CLK>, - <&mmcc MDSS_AHB_CLK>, - <&mmcc MDSS_HDMI_CLK>, - <&mmcc MDSS_HDMI_AHB_CLK>, - <&mmcc MDSS_EXTPCLK_CLK>; - clock-names = - "mdp_core", - "iface", - "core", - "alt_iface", - "extp"; + intc: interrupt-controller@9bc0000 { + compatible = "qcom,msm8996-gic-v3", "arm,gic-v3"; + #interrupt-cells = <3>; + interrupt-controller; + #redistributor-regions = <1>; + redistributor-stride = <0x0 0x40000>; + reg = <0x09bc0000 0x10000>, + <0x09c00000 0x100000>; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + }; + }; - phys = <&hdmi_phy>; - phy-names = "hdmi_phy"; - #sound-dai-cells = <1>; + sound: sound { + }; - ports { - #address-cells = <1>; - #size-cells = <0>; + thermal-zones { + cpu0-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; - port@0 { - reg = <0>; - hdmi_in: endpoint { - remote-endpoint = <&mdp5_intf3_out>; - }; - }; - }; - }; + thermal-sensors = <&tsens0 3>; - hdmi_phy: hdmi-phy@9a0600 { - #phy-cells = <0>; - compatible = "qcom,hdmi-phy-8996"; - reg = <0x9a0600 0x1c4>, - <0x9a0a00 0x124>, - <0x9a0c00 0x124>, - <0x9a0e00 0x124>, - <0x9a1000 0x124>, - <0x9a1200 0x0c8>; - reg-names = "hdmi_pll", - "hdmi_tx_l0", - "hdmi_tx_l1", - "hdmi_tx_l2", - "hdmi_tx_l3", - "hdmi_phy"; + trips { + cpu0_alert0: trip-point@0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; - clocks = <&mmcc MDSS_AHB_CLK>, - <&gcc GCC_HDMI_CLKREF_CLK>; - clock-names = "iface", - "ref"; + cpu0_crit: cpu_crit { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; }; }; - }; - sound: sound { - }; - - adsp-pil { - compatible = "qcom,msm8996-adsp-pil"; + cpu1-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; - interrupts-extended = <&intc 0 162 IRQ_TYPE_EDGE_RISING>, - <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, - <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, - <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, - <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "wdog", "fatal", "ready", - "handover", "stop-ack"; + thermal-sensors = <&tsens0 5>; - clocks = <&xo_board>; - clock-names = "xo"; + trips { + cpu1_alert0: trip-point@0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; - memory-region = <&adsp_region>; + cpu1_crit: cpu_crit { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; - qcom,smem-states = <&adsp_smp2p_out 0>; - qcom,smem-state-names = "stop"; + cpu2-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; - smd-edge { - interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>; + thermal-sensors = <&tsens0 8>; - label = "lpass"; - mboxes = <&apcs_glb 8>; - qcom,smd-edge = <1>; - qcom,remote-pid = <2>; - #address-cells = <1>; - #size-cells = <0>; - apr { - power-domains = <&gcc HLOS1_VOTE_LPASS_ADSP_GDSC>; - compatible = "qcom,apr-v2"; - qcom,smd-channels = "apr_audio_svc"; - qcom,apr-domain = <APR_DOMAIN_ADSP>; - #address-cells = <1>; - #size-cells = <0>; + trips { + cpu2_alert0: trip-point@0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; - q6core { - reg = <APR_SVC_ADSP_CORE>; - compatible = "qcom,q6core"; - }; - - q6afe: q6afe { - compatible = "qcom,q6afe"; - reg = <APR_SVC_AFE>; - q6afedai: dais { - compatible = "qcom,q6afe-dais"; - #address-cells = <1>; - #size-cells = <0>; - #sound-dai-cells = <1>; - hdmi@1 { - reg = <1>; - }; - }; + cpu2_crit: cpu_crit { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; }; + }; + }; - q6asm: q6asm { - compatible = "qcom,q6asm"; - reg = <APR_SVC_ASM>; - q6asmdai: dais { - compatible = "qcom,q6asm-dais"; - #sound-dai-cells = <1>; - iommus = <&lpass_q6_smmu 1>; - }; + cpu3-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 10>; + + trips { + cpu3_alert0: trip-point@0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; }; - q6adm: q6adm { - compatible = "qcom,q6adm"; - reg = <APR_SVC_ADM>; - q6routing: routing { - compatible = "qcom,q6adm-routing"; - #sound-dai-cells = <0>; - }; + cpu3_crit: cpu_crit { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; }; }; + }; + + gpu-thermal-top { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsens1 6>; + + trips { + gpu1_alert0: trip-point@0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; }; - }; - adsp-smp2p { - compatible = "qcom,smp2p"; - qcom,smem = <443>, <429>; + gpu-thermal-bottom { + polling-delay-passive = <250>; + polling-delay = <1000>; - interrupts = <0 158 IRQ_TYPE_EDGE_RISING>; + thermal-sensors = <&tsens1 7>; - mboxes = <&apcs_glb 10>; + trips { + gpu2_alert0: trip-point@0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; - qcom,local-pid = <0>; - qcom,remote-pid = <2>; + m4m-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; - adsp_smp2p_out: master-kernel { - qcom,entry-name = "master-kernel"; - #qcom,smem-state-cells = <1>; + thermal-sensors = <&tsens0 1>; + + trips { + m4m_alert0: trip-point@0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; }; - adsp_smp2p_in: slave-kernel { - qcom,entry-name = "slave-kernel"; + l3-or-venus-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; - interrupt-controller; - #interrupt-cells = <2>; + thermal-sensors = <&tsens0 2>; + + trips { + l3_or_venus_alert0: trip-point@0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; }; - }; - modem-smp2p { - compatible = "qcom,smp2p"; - qcom,smem = <435>, <428>; + cluster0-l2-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; - interrupts = <GIC_SPI 451 IRQ_TYPE_EDGE_RISING>; + thermal-sensors = <&tsens0 7>; - mboxes = <&apcs_glb 14>; + trips { + cluster0_l2_alert0: trip-point@0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; - qcom,local-pid = <0>; - qcom,remote-pid = <1>; + cluster1-l2-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; - modem_smp2p_out: master-kernel { - qcom,entry-name = "master-kernel"; - #qcom,smem-state-cells = <1>; + thermal-sensors = <&tsens0 12>; + + trips { + cluster1_l2_alert0: trip-point@0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; }; - modem_smp2p_in: slave-kernel { - qcom,entry-name = "slave-kernel"; + camera-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; - interrupt-controller; - #interrupt-cells = <2>; + thermal-sensors = <&tsens1 1>; + + trips { + camera_alert0: trip-point@0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; }; - }; - smp2p-slpi { - compatible = "qcom,smp2p"; - qcom,smem = <481>, <430>; + q6-dsp-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; - interrupts = <GIC_SPI 178 IRQ_TYPE_EDGE_RISING>; + thermal-sensors = <&tsens1 2>; - mboxes = <&apcs_glb 26>; + trips { + q6_dsp_alert0: trip-point@0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; - qcom,local-pid = <0>; - qcom,remote-pid = <3>; + mem-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; - slpi_smp2p_in: slave-kernel { - qcom,entry-name = "slave-kernel"; - interrupt-controller; - #interrupt-cells = <2>; + thermal-sensors = <&tsens1 3>; + + trips { + mem_alert0: trip-point@0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; }; - slpi_smp2p_out: master-kernel { - qcom,entry-name = "master-kernel"; - #qcom,smem-state-cells = <1>; + modemtx-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 4>; + + trips { + modemtx_alert0: trip-point@0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; }; }; + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; + }; }; #include "msm8996-pins.dtsi" diff --git a/arch/arm64/boot/dts/qcom/msm8998-asus-novago-tp370ql.dts b/arch/arm64/boot/dts/qcom/msm8998-asus-novago-tp370ql.dts new file mode 100644 index 000000000000..db5821be1e2f --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8998-asus-novago-tp370ql.dts @@ -0,0 +1,47 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Copyright (c) 2019, Jeffrey Hugo. All rights reserved. */ + +/dts-v1/; + +#include "msm8998-clamshell.dtsi" + +/ { + model = "Asus NovaGo TP370QL"; + compatible = "asus,novago-tp370ql", "qcom,msm8998"; +}; + +&blsp1_i2c6 { + status = "okay"; + + touchpad@15 { + compatible = "hid-over-i2c"; + interrupt-parent = <&tlmm>; + interrupts = <0x7b IRQ_TYPE_LEVEL_LOW>; + reg = <0x15>; + hid-descr-addr = <0x0001>; + + pinctrl-names = "default"; + pinctrl-0 = <&touchpad>; + }; + + keyboard@3a { + compatible = "hid-over-i2c"; + interrupt-parent = <&tlmm>; + interrupts = <0x25 IRQ_TYPE_LEVEL_LOW>; + reg = <0x3a>; + hid-descr-addr = <0x0001>; + }; +}; + +&sdhc2 { + cd-gpios = <&tlmm 95 GPIO_ACTIVE_HIGH>; +}; + +&tlmm { + touchpad: touchpad { + config { + pins = "gpio123"; + bias-pull-up; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi b/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi new file mode 100644 index 000000000000..6ab830d01867 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi @@ -0,0 +1,343 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Copyright (c) 2019, Jeffrey Hugo. All rights reserved. */ + +/* + * Common include for MSM8998 clamshell devices, ie the Lenovo Miix 630, + * Asus NovaGo TP370QL, and HP Envy x2. All three devices are basically the + * same, with differences in peripherals. + */ + +#include "msm8998.dtsi" +#include "pm8998.dtsi" +#include "pm8005.dtsi" + +/ { + chosen { + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-always-on; + regulator-boot-on; + }; +}; + +&blsp1_uart3 { + status = "okay"; + + bluetooth { + compatible = "qcom,wcn3990-bt"; + + vddio-supply = <&vreg_s4a_1p8>; + vddxo-supply = <&vreg_l7a_1p8>; + vddrf-supply = <&vreg_l17a_1p3>; + vddch0-supply = <&vreg_l25a_3p3>; + max-speed = <3200000>; + }; +}; + +/* + * The laptop FW does not appear to support the retention state as it is + * not advertised as enabled in ACPI, and enabling it in DT can cause boot + * hangs. + */ +&CPU0 { + cpu-idle-states = <&LITTLE_CPU_SLEEP_1>; +}; + +&CPU1 { + cpu-idle-states = <&LITTLE_CPU_SLEEP_1>; +}; + +&CPU2 { + cpu-idle-states = <&LITTLE_CPU_SLEEP_1>; +}; + +&CPU3 { + cpu-idle-states = <&LITTLE_CPU_SLEEP_1>; +}; + +&CPU4 { + cpu-idle-states = <&BIG_CPU_SLEEP_1>; +}; + +&CPU5 { + cpu-idle-states = <&BIG_CPU_SLEEP_1>; +}; + +&CPU6 { + cpu-idle-states = <&BIG_CPU_SLEEP_1>; +}; + +&CPU7 { + cpu-idle-states = <&BIG_CPU_SLEEP_1>; +}; + +&pm8005_lsid1 { + pm8005-regulators { + compatible = "qcom,pm8005-regulators"; + + vdd_s1-supply = <&vph_pwr>; + + pm8005_s1: s1 { /* VDD_GFX supply */ + regulator-min-microvolt = <524000>; + regulator-max-microvolt = <1100000>; + regulator-enable-ramp-delay = <500>; + + /* hack until we rig up the gpu consumer */ + regulator-always-on; + }; + }; +}; + +&qusb2phy { + status = "okay"; + + vdda-pll-supply = <&vreg_l12a_1p8>; + vdda-phy-dpdm-supply = <&vreg_l24a_3p075>; +}; + +&rpm_requests { + pm8998-regulators { + compatible = "qcom,rpm-pm8998-regulators"; + + vdd_s1-supply = <&vph_pwr>; + vdd_s2-supply = <&vph_pwr>; + vdd_s3-supply = <&vph_pwr>; + vdd_s4-supply = <&vph_pwr>; + vdd_s5-supply = <&vph_pwr>; + vdd_s6-supply = <&vph_pwr>; + vdd_s7-supply = <&vph_pwr>; + vdd_s8-supply = <&vph_pwr>; + vdd_s9-supply = <&vph_pwr>; + vdd_s10-supply = <&vph_pwr>; + vdd_s11-supply = <&vph_pwr>; + vdd_s12-supply = <&vph_pwr>; + vdd_s13-supply = <&vph_pwr>; + vdd_l1_l27-supply = <&vreg_s7a_1p025>; + vdd_l2_l8_l17-supply = <&vreg_s3a_1p35>; + vdd_l3_l11-supply = <&vreg_s7a_1p025>; + vdd_l4_l5-supply = <&vreg_s7a_1p025>; + vdd_l6-supply = <&vreg_s5a_2p04>; + vdd_l7_l12_l14_l15-supply = <&vreg_s5a_2p04>; + vdd_l9-supply = <&vph_pwr>; + vdd_l10_l23_l25-supply = <&vph_pwr>; + vdd_l13_l19_l21-supply = <&vph_pwr>; + vdd_l16_l28-supply = <&vph_pwr>; + vdd_l18_l22-supply = <&vph_pwr>; + vdd_l20_l24-supply = <&vph_pwr>; + vdd_l26-supply = <&vreg_s3a_1p35>; + vdd_lvs1_lvs2-supply = <&vreg_s4a_1p8>; + + vreg_s3a_1p35: s3 { + regulator-min-microvolt = <1352000>; + regulator-max-microvolt = <1352000>; + }; + vreg_s4a_1p8: s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-allow-set-load; + }; + vreg_s5a_2p04: s5 { + regulator-min-microvolt = <1904000>; + regulator-max-microvolt = <2040000>; + }; + vreg_s7a_1p025: s7 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1028000>; + }; + vreg_l1a_0p875: l1 { + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-allow-set-load; + }; + vreg_l2a_1p2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-allow-set-load; + }; + vreg_l3a_1p0: l3 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + vreg_l5a_0p8: l5 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + }; + vreg_l6a_1p8: l6 { + regulator-min-microvolt = <1808000>; + regulator-max-microvolt = <1808000>; + }; + vreg_l7a_1p8: l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-allow-set-load; + }; + vreg_l8a_1p2: l8 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + vreg_l9a_1p8: l9 { + regulator-min-microvolt = <1808000>; + regulator-max-microvolt = <2960000>; + }; + vreg_l10a_1p8: l10 { + regulator-min-microvolt = <1808000>; + regulator-max-microvolt = <2960000>; + }; + vreg_l11a_1p0: l11 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + vreg_l12a_1p8: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l13a_2p95: l13 { + regulator-min-microvolt = <1808000>; + regulator-max-microvolt = <2960000>; + }; + vreg_l14a_1p88: l14 { + regulator-min-microvolt = <1880000>; + regulator-max-microvolt = <1880000>; + }; + vreg_15a_1p8: l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l16a_2p7: l16 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2704000>; + }; + vreg_l17a_1p3: l17 { + regulator-min-microvolt = <1304000>; + regulator-max-microvolt = <1304000>; + regulator-allow-set-load; + }; + vreg_l18a_2p7: l18 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2704000>; + }; + vreg_l19a_3p0: l19 { + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; + }; + vreg_l20a_2p95: l20 { + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + regulator-allow-set-load; + }; + vreg_l21a_2p95: l21 { + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + regulator-allow-set-load; + regulator-system-load = <800000>; + }; + vreg_l22a_2p85: l22 { + regulator-min-microvolt = <2864000>; + regulator-max-microvolt = <2864000>; + }; + vreg_l23a_3p3: l23 { + regulator-min-microvolt = <3312000>; + regulator-max-microvolt = <3312000>; + }; + vreg_l24a_3p075: l24 { + regulator-min-microvolt = <3088000>; + regulator-max-microvolt = <3088000>; + }; + vreg_l25a_3p3: l25 { + regulator-min-microvolt = <3104000>; + regulator-max-microvolt = <3312000>; + regulator-allow-set-load; + }; + vreg_l26a_1p2: l26 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + vreg_l28_3p0: l28 { + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; + }; + + vreg_lvs1a_1p8: lvs1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_lvs2a_1p8: lvs2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + }; +}; + +&tlmm { + gpio-reserved-ranges = <0 4>, <81 4>; + + touchpad: touchpad { + config { + pins = "gpio123"; + bias-pull-up; /* pull up */ + }; + }; +}; + +&sdhc2 { + status = "okay"; + + vmmc-supply = <&vreg_l21a_2p95>; + vqmmc-supply = <&vreg_l13a_2p95>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; + pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; +}; + +&usb3 { + status = "okay"; +}; + +&usb3_dwc3 { + dr_mode = "host"; /* Force to host until we have Type-C hooked up */ +}; + +&usb3phy { + status = "okay"; + + vdda-phy-supply = <&vreg_l1a_0p875>; + vdda-pll-supply = <&vreg_l2a_1p2>; +}; + +&wifi { + status = "okay"; + + vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>; + vdd-1.8-xo-supply = <&vreg_l7a_1p8>; + vdd-1.3-rfa-supply = <&vreg_l17a_1p3>; + vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; +}; + +/* PINCTRL - board-specific pinctrl */ +&blsp1_uart3_on { + rx { + /delete-property/ bias-disable; + /* + * Configure a pull-up on 45 (RX). This is needed to + * avoid garbage data when the TX pin of the Bluetooth + * module is in tri-state (module powered off or not + * driving the signal yet). + */ + bias-pull-up; + }; + + cts { + /delete-property/ bias-disable; + /* + * Configure a pull-down on 47 (CTS) to match the pull + * of the Bluetooth module. + */ + bias-pull-down; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8998-hp-envy-x2.dts b/arch/arm64/boot/dts/qcom/msm8998-hp-envy-x2.dts new file mode 100644 index 000000000000..24073127091f --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8998-hp-envy-x2.dts @@ -0,0 +1,30 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Copyright (c) 2019, Jeffrey Hugo. All rights reserved. */ + +/dts-v1/; + +#include "msm8998-clamshell.dtsi" + +/ { + model = "HP Envy x2"; + compatible = "hp,envy-x2", "qcom,msm8998"; +}; + +&blsp1_i2c6 { + status = "okay"; + + keyboard@3a { + compatible = "hid-over-i2c"; + interrupt-parent = <&tlmm>; + interrupts = <0x79 IRQ_TYPE_LEVEL_LOW>; + reg = <0x3a>; + hid-descr-addr = <0x0001>; + + pinctrl-names = "default"; + pinctrl-0 = <&touchpad>; + }; +}; + +&sdhc2 { + cd-gpios = <&tlmm 95 GPIO_ACTIVE_LOW>; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dts b/arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dts new file mode 100644 index 000000000000..407c6a32911c --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dts @@ -0,0 +1,30 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Copyright (c) 2019, Jeffrey Hugo. All rights reserved. */ + +/dts-v1/; + +#include "msm8998-clamshell.dtsi" + +/ { + model = "Lenovo Miix 630"; + compatible = "lenovo,miix-630", "qcom,msm8998"; +}; + +&blsp1_i2c6 { + status = "okay"; + + keyboard@3a { + compatible = "hid-over-i2c"; + interrupt-parent = <&tlmm>; + interrupts = <0x79 IRQ_TYPE_LEVEL_LOW>; + reg = <0x3a>; + hid-descr-addr = <0x0001>; + + pinctrl-names = "default"; + pinctrl-0 = <&touchpad>; + }; +}; + +&sdhc2 { + cd-gpios = <&tlmm 95 GPIO_ACTIVE_HIGH>; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi b/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi index 108667ce4f31..0e0b9bc12945 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi @@ -9,6 +9,7 @@ / { aliases { serial0 = &blsp2_uart1; + serial1 = &blsp1_uart3; }; chosen { @@ -23,10 +24,84 @@ }; }; +&blsp1_uart3 { + status = "okay"; + + bluetooth { + compatible = "qcom,wcn3990-bt"; + + vddio-supply = <&vreg_s4a_1p8>; + vddxo-supply = <&vreg_l7a_1p8>; + vddrf-supply = <&vreg_l17a_1p3>; + vddch0-supply = <&vreg_l25a_3p3>; + max-speed = <3200000>; + }; +}; + &blsp2_uart1 { status = "okay"; }; +&etf { + status = "okay"; +}; + +&etm1 { + status = "okay"; +}; + +&etm2 { + status = "okay"; +}; + +&etm3 { + status = "okay"; +}; + +&etm4 { + status = "okay"; +}; + +&etm5 { + status = "okay"; +}; + +&etm6 { + status = "okay"; +}; + +&etm7 { + status = "okay"; +}; + +&etm8 { + status = "okay"; +}; + +&etr { + status = "okay"; +}; + +&funnel1 { + status = "okay"; +}; + +&funnel2 { + status = "okay"; +}; + +&funnel3 { + status = "okay"; +}; + +&funnel4 { + status = "okay"; +}; + +&funnel5 { + status = "okay"; +}; + &pm8005_lsid1 { pm8005-regulators { compatible = "qcom,pm8005-regulators"; @@ -51,6 +126,10 @@ vdda-phy-dpdm-supply = <&vreg_l24a_3p075>; }; +&replicator1 { + status = "okay"; +}; + &rpm_requests { pm8998-regulators { compatible = "qcom,rpm-pm8998-regulators"; @@ -233,6 +312,14 @@ }; }; +&remoteproc_adsp { + status = "okay"; +}; + +&remoteproc_slpi { + status = "okay"; +}; + &tlmm { gpio-reserved-ranges = <0 4>, <81 4>; }; @@ -249,6 +336,10 @@ pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; }; +&stm { + status = "okay"; +}; + &ufshc { vcc-supply = <&vreg_l20a_2p95>; vccq-supply = <&vreg_l26a_1p2>; @@ -282,3 +373,35 @@ vdda-phy-supply = <&vreg_l1a_0p875>; vdda-pll-supply = <&vreg_l2a_1p2>; }; + +&wifi { + status = "okay"; + + vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>; + vdd-1.8-xo-supply = <&vreg_l7a_1p8>; + vdd-1.3-rfa-supply = <&vreg_l17a_1p3>; + vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; +}; + +/* PINCTRL - board-specific pinctrl */ +&blsp1_uart3_on { + rx { + /delete-property/ bias-disable; + /* + * Configure a pull-up on 45 (RX). This is needed to + * avoid garbage data when the TX pin of the Bluetooth + * module is in tri-state (module powered off or not + * driving the signal yet). + */ + bias-pull-up; + }; + + cts { + /delete-property/ bias-disable; + /* + * Configure a pull-down on 47 (CTS) to match the pull + * of the Bluetooth module. + */ + bias-pull-down; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8998-pins.dtsi b/arch/arm64/boot/dts/qcom/msm8998-pins.dtsi index 6db70acd38ee..7c222cbf19d9 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-pins.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998-pins.dtsi @@ -75,4 +75,34 @@ drive-strength = <2>; /* 2 mA */ }; }; + + blsp1_uart3_on: blsp1_uart3_on { + tx { + pins = "gpio45"; + function = "blsp_uart3_a"; + drive-strength = <2>; + bias-disable; + }; + + rx { + pins = "gpio46"; + function = "blsp_uart3_a"; + drive-strength = <2>; + bias-disable; + }; + + cts { + pins = "gpio47"; + function = "blsp_uart3_a"; + drive-strength = <2>; + bias-disable; + }; + + rfr { + pins = "gpio48"; + function = "blsp_uart3_a"; + drive-strength = <2>; + bias-disable; + }; + }; }; diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi index c13ed7aeb1e0..91f7f2d07597 100644 --- a/arch/arm64/boot/dts/qcom/msm8998.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi @@ -3,6 +3,7 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/qcom,gcc-msm8998.h> +#include <dt-bindings/clock/qcom,gpucc-msm8998.h> #include <dt-bindings/clock/qcom,rpmcc.h> #include <dt-bindings/power/qcom-rpmpd.h> #include <dt-bindings/gpio/gpio.h> @@ -28,8 +29,13 @@ #size-cells = <2>; ranges; - memory@85800000 { - reg = <0x0 0x85800000 0x0 0x800000>; + hyp_mem: memory@85800000 { + reg = <0x0 0x85800000 0x0 0x600000>; + no-map; + }; + + xbl_mem: memory@85e00000 { + reg = <0x0 0x85e00000 0x0 0x100000>; no-map; }; @@ -38,21 +44,69 @@ no-map; }; - memory@86200000 { + tz_mem: memory@86200000 { reg = <0x0 0x86200000 0x0 0x2d00000>; no-map; }; - rmtfs { + rmtfs_mem: memory@88f00000 { compatible = "qcom,rmtfs-mem"; - - size = <0x0 0x200000>; - alloc-ranges = <0x0 0xa0000000 0x0 0x2000000>; + reg = <0x0 0x88f00000 0x0 0x200000>; no-map; qcom,client-id = <1>; qcom,vmid = <15>; }; + + spss_mem: memory@8ab00000 { + reg = <0x0 0x8ab00000 0x0 0x700000>; + no-map; + }; + + adsp_mem: memory@8b200000 { + reg = <0x0 0x8b200000 0x0 0x1a00000>; + no-map; + }; + + mpss_mem: memory@8cc00000 { + reg = <0x0 0x8cc00000 0x0 0x7000000>; + no-map; + }; + + venus_mem: memory@93c00000 { + reg = <0x0 0x93c00000 0x0 0x500000>; + no-map; + }; + + mba_mem: memory@94100000 { + reg = <0x0 0x94100000 0x0 0x200000>; + no-map; + }; + + slpi_mem: memory@94300000 { + reg = <0x0 0x94300000 0x0 0xf00000>; + no-map; + }; + + ipa_fw_mem: memory@95200000 { + reg = <0x0 0x95200000 0x0 0x10000>; + no-map; + }; + + ipa_gsi_mem: memory@95210000 { + reg = <0x0 0x95210000 0x0 0x5000>; + no-map; + }; + + gpu_mem: memory@95600000 { + reg = <0x0 0x95600000 0x0 0x100000>; + no-map; + }; + + wlan_msa_mem: memory@95700000 { + reg = <0x0 0x95700000 0x0 0x100000>; + no-map; + }; }; clocks { @@ -787,14 +841,22 @@ ranges = <0 0 0 0xffffffff>; compatible = "simple-bus"; - rpm_msg_ram: memory@68000 { + gcc: clock-controller@100000 { + compatible = "qcom,gcc-msm8998"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + reg = <0x00100000 0xb0000>; + }; + + rpm_msg_ram: memory@778000 { compatible = "qcom,rpm-msg-ram"; - reg = <0x778000 0x7000>; + reg = <0x00778000 0x7000>; }; qfprom: qfprom@780000 { compatible = "qcom,qfprom"; - reg = <0x780000 0x621c>; + reg = <0x00780000 0x621c>; #address-cells = <1>; #size-cells = <1>; @@ -804,58 +866,25 @@ }; }; - gcc: clock-controller@100000 { - compatible = "qcom,gcc-msm8998"; - #clock-cells = <1>; - #reset-cells = <1>; - #power-domain-cells = <1>; - reg = <0x100000 0xb0000>; - }; - - tlmm: pinctrl@3400000 { - compatible = "qcom,msm8998-pinctrl"; - reg = <0x3400000 0xc00000>; - interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; - gpio-controller; - #gpio-cells = <0x2>; - interrupt-controller; - #interrupt-cells = <0x2>; - }; - - spmi_bus: spmi@800f000 { - compatible = "qcom,spmi-pmic-arb"; - reg = <0x800f000 0x1000>, - <0x8400000 0x1000000>, - <0x9400000 0x1000000>, - <0xa400000 0x220000>, - <0x800a000 0x3000>; - reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; - interrupt-names = "periph_irq"; - interrupts = <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>; - qcom,ee = <0>; - qcom,channel = <0>; - #address-cells = <2>; - #size-cells = <0>; - interrupt-controller; - #interrupt-cells = <4>; - cell-index = <0>; - }; - tsens0: thermal@10ab000 { compatible = "qcom,msm8998-tsens", "qcom,tsens-v2"; - reg = <0x10ab000 0x1000>, /* TM */ - <0x10aa000 0x1000>; /* SROT */ - + reg = <0x010ab000 0x1000>, /* TM */ + <0x010aa000 0x1000>; /* SROT */ #qcom,sensors = <14>; + interrupts = <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 445 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", "critical"; #thermal-sensor-cells = <1>; }; tsens1: thermal@10ae000 { compatible = "qcom,msm8998-tsens", "qcom,tsens-v2"; - reg = <0x10ae000 0x1000>, /* TM */ - <0x10ad000 0x1000>; /* SROT */ - + reg = <0x010ae000 0x1000>, /* TM */ + <0x010ad000 0x1000>; /* SROT */ #qcom,sensors = <8>; + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", "critical"; #thermal-sensor-cells = <1>; }; @@ -874,6 +903,25 @@ <GIC_SPI 369 IRQ_TYPE_EDGE_RISING>; }; + anoc2_smmu: iommu@16c0000 { + compatible = "qcom,msm8998-smmu-v2", "qcom,smmu-v2"; + reg = <0x016c0000 0x40000>; + #iommu-cells = <1>; + + #global-interrupts = <0>; + interrupts = + <GIC_SPI 373 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 374 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 375 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 376 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 377 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 378 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 462 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 463 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 464 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 465 IRQ_TYPE_EDGE_RISING>; + }; + pcie0: pci@1c00000 { compatible = "qcom,pcie-msm8996"; reg = <0x01c00000 0x2000>, @@ -943,16 +991,663 @@ }; }; + ufshc: ufshc@1da4000 { + compatible = "qcom,msm8998-ufshc", "qcom,ufshc", "jedec,ufs-2.0"; + reg = <0x01da4000 0x2500>; + interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; + phys = <&ufsphy_lanes>; + phy-names = "ufsphy"; + lanes-per-direction = <2>; + power-domains = <&gcc UFS_GDSC>; + #reset-cells = <1>; + + clock-names = + "core_clk", + "bus_aggr_clk", + "iface_clk", + "core_clk_unipro", + "ref_clk", + "tx_lane0_sync_clk", + "rx_lane0_sync_clk", + "rx_lane1_sync_clk"; + clocks = + <&gcc GCC_UFS_AXI_CLK>, + <&gcc GCC_AGGRE1_UFS_AXI_CLK>, + <&gcc GCC_UFS_AHB_CLK>, + <&gcc GCC_UFS_UNIPRO_CORE_CLK>, + <&rpmcc RPM_SMD_LN_BB_CLK1>, + <&gcc GCC_UFS_TX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_RX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_RX_SYMBOL_1_CLK>; + freq-table-hz = + <50000000 200000000>, + <0 0>, + <0 0>, + <37500000 150000000>, + <0 0>, + <0 0>, + <0 0>, + <0 0>; + + resets = <&gcc GCC_UFS_BCR>; + reset-names = "rst"; + }; + + ufsphy: phy@1da7000 { + compatible = "qcom,msm8998-qmp-ufs-phy"; + reg = <0x01da7000 0x18c>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + clock-names = + "ref", + "ref_aux"; + clocks = + <&gcc GCC_UFS_CLKREF_CLK>, + <&gcc GCC_UFS_PHY_AUX_CLK>; + + reset-names = "ufsphy"; + resets = <&ufshc 0>; + + ufsphy_lanes: lanes@1da7400 { + reg = <0x01da7400 0x128>, + <0x01da7600 0x1fc>, + <0x01da7c00 0x1dc>, + <0x01da7800 0x128>, + <0x01da7a00 0x1fc>; + #phy-cells = <0>; + }; + }; + tcsr_mutex_regs: syscon@1f40000 { compatible = "syscon"; - reg = <0x1f40000 0x20000>; + reg = <0x01f40000 0x40000>; }; - apcs_glb: mailbox@9820000 { - compatible = "qcom,msm8998-apcs-hmss-global"; - reg = <0x17911000 0x1000>; + tlmm: pinctrl@3400000 { + compatible = "qcom,msm8998-pinctrl"; + reg = <0x03400000 0xc00000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <0x2>; + interrupt-controller; + #interrupt-cells = <0x2>; + }; - #mbox-cells = <1>; + remoteproc_mss: remoteproc@4080000 { + compatible = "qcom,msm8998-mss-pil"; + reg = <0x04080000 0x100>, <0x04180000 0x20>; + reg-names = "qdsp6", "rmb"; + + interrupts-extended = + <&intc GIC_SPI 448 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack", + "shutdown-ack"; + + clocks = <&gcc GCC_MSS_CFG_AHB_CLK>, + <&gcc GCC_BIMC_MSS_Q6_AXI_CLK>, + <&gcc GCC_BOOT_ROM_AHB_CLK>, + <&gcc GCC_MSS_GPLL0_DIV_CLK_SRC>, + <&gcc GCC_MSS_SNOC_AXI_CLK>, + <&gcc GCC_MSS_MNOC_BIMC_AXI_CLK>, + <&rpmcc RPM_SMD_QDSS_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "iface", "bus", "mem", "gpll0_mss", + "snoc_axi", "mnoc_axi", "qdss", "xo"; + + qcom,smem-states = <&modem_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + resets = <&gcc GCC_MSS_RESTART>; + reset-names = "mss_restart"; + + qcom,halt-regs = <&tcsr_mutex_regs 0x23000 0x25000 0x24000>; + + power-domains = <&rpmpd MSM8998_VDDCX>, + <&rpmpd MSM8998_VDDMX>; + power-domain-names = "cx", "mx"; + + mba { + memory-region = <&mba_mem>; + }; + + mpss { + memory-region = <&mpss_mem>; + }; + + glink-edge { + interrupts = <GIC_SPI 452 IRQ_TYPE_EDGE_RISING>; + label = "modem"; + qcom,remote-pid = <1>; + mboxes = <&apcs_glb 15>; + }; + }; + + gpucc: clock-controller@5065000 { + compatible = "qcom,msm8998-gpucc"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + reg = <0x05065000 0x9000>; + + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, + <&gcc GPLL0_OUT_MAIN>; + clock-names = "xo", + "gpll0"; + }; + + remoteproc_slpi: remoteproc@5800000 { + compatible = "qcom,msm8998-slpi-pas"; + reg = <0x05800000 0x4040>; + + interrupts-extended = <&intc GIC_SPI 390 IRQ_TYPE_EDGE_RISING>, + <&slpi_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&slpi_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&slpi_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&slpi_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + px-supply = <&vreg_lvs2a_1p8>; + + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, + <&rpmcc RPM_SMD_AGGR2_NOC_CLK>; + clock-names = "xo", "aggre2"; + + memory-region = <&slpi_mem>; + + qcom,smem-states = <&slpi_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + power-domains = <&rpmpd MSM8998_SSCCX>; + power-domain-names = "ssc_cx"; + + status = "disabled"; + + glink-edge { + interrupts = <GIC_SPI 179 IRQ_TYPE_EDGE_RISING>; + label = "dsps"; + qcom,remote-pid = <3>; + mboxes = <&apcs_glb 27>; + }; + }; + + stm: stm@6002000 { + compatible = "arm,coresight-stm", "arm,primecell"; + reg = <0x06002000 0x1000>, + <0x16280000 0x180000>; + reg-names = "stm-base", "stm-data-base"; + status = "disabled"; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + out-ports { + port { + stm_out: endpoint { + remote-endpoint = <&funnel0_in7>; + }; + }; + }; + }; + + funnel1: funnel@6041000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x06041000 0x1000>; + status = "disabled"; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + out-ports { + port { + funnel0_out: endpoint { + remote-endpoint = + <&merge_funnel_in0>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@7 { + reg = <7>; + funnel0_in7: endpoint { + remote-endpoint = <&stm_out>; + }; + }; + }; + }; + + funnel2: funnel@6042000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x06042000 0x1000>; + status = "disabled"; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + out-ports { + port { + funnel1_out: endpoint { + remote-endpoint = + <&merge_funnel_in1>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@6 { + reg = <6>; + funnel1_in6: endpoint { + remote-endpoint = + <&apss_merge_funnel_out>; + }; + }; + }; + }; + + funnel3: funnel@6045000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x06045000 0x1000>; + status = "disabled"; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + out-ports { + port { + merge_funnel_out: endpoint { + remote-endpoint = + <&etf_in>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + merge_funnel_in0: endpoint { + remote-endpoint = + <&funnel0_out>; + }; + }; + + port@1 { + reg = <1>; + merge_funnel_in1: endpoint { + remote-endpoint = + <&funnel1_out>; + }; + }; + }; + }; + + replicator1: replicator@6046000 { + compatible = "arm,coresight-dynamic-replicator", "arm,primecell"; + reg = <0x06046000 0x1000>; + status = "disabled"; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + out-ports { + port { + replicator_out: endpoint { + remote-endpoint = <&etr_in>; + }; + }; + }; + + in-ports { + port { + replicator_in: endpoint { + remote-endpoint = <&etf_out>; + }; + }; + }; + }; + + etf: etf@6047000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0x06047000 0x1000>; + status = "disabled"; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + out-ports { + port { + etf_out: endpoint { + remote-endpoint = + <&replicator_in>; + }; + }; + }; + + in-ports { + port { + etf_in: endpoint { + remote-endpoint = + <&merge_funnel_out>; + }; + }; + }; + }; + + etr: etr@6048000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0x06048000 0x1000>; + status = "disabled"; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + arm,scatter-gather; + + in-ports { + port { + etr_in: endpoint { + remote-endpoint = + <&replicator_out>; + }; + }; + }; + }; + + etm1: etm@7840000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0x07840000 0x1000>; + status = "disabled"; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + cpu = <&CPU0>; + + out-ports { + port { + etm0_out: endpoint { + remote-endpoint = + <&apss_funnel_in0>; + }; + }; + }; + }; + + etm2: etm@7940000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0x07940000 0x1000>; + status = "disabled"; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + cpu = <&CPU1>; + + out-ports { + port { + etm1_out: endpoint { + remote-endpoint = + <&apss_funnel_in1>; + }; + }; + }; + }; + + etm3: etm@7a40000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0x07a40000 0x1000>; + status = "disabled"; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + cpu = <&CPU2>; + + out-ports { + port { + etm2_out: endpoint { + remote-endpoint = + <&apss_funnel_in2>; + }; + }; + }; + }; + + etm4: etm@7b40000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0x07b40000 0x1000>; + status = "disabled"; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + cpu = <&CPU3>; + + out-ports { + port { + etm3_out: endpoint { + remote-endpoint = + <&apss_funnel_in3>; + }; + }; + }; + }; + + funnel4: funnel@7b60000 { /* APSS Funnel */ + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0x07b60000 0x1000>; + status = "disabled"; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + out-ports { + port { + apss_funnel_out: endpoint { + remote-endpoint = + <&apss_merge_funnel_in>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + apss_funnel_in0: endpoint { + remote-endpoint = + <&etm0_out>; + }; + }; + + port@1 { + reg = <1>; + apss_funnel_in1: endpoint { + remote-endpoint = + <&etm1_out>; + }; + }; + + port@2 { + reg = <2>; + apss_funnel_in2: endpoint { + remote-endpoint = + <&etm2_out>; + }; + }; + + port@3 { + reg = <3>; + apss_funnel_in3: endpoint { + remote-endpoint = + <&etm3_out>; + }; + }; + + port@4 { + reg = <4>; + apss_funnel_in4: endpoint { + remote-endpoint = + <&etm4_out>; + }; + }; + + port@5 { + reg = <5>; + apss_funnel_in5: endpoint { + remote-endpoint = + <&etm5_out>; + }; + }; + + port@6 { + reg = <6>; + apss_funnel_in6: endpoint { + remote-endpoint = + <&etm6_out>; + }; + }; + + port@7 { + reg = <7>; + apss_funnel_in7: endpoint { + remote-endpoint = + <&etm7_out>; + }; + }; + }; + }; + + funnel5: funnel@7b70000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x07b70000 0x1000>; + status = "disabled"; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + out-ports { + port { + apss_merge_funnel_out: endpoint { + remote-endpoint = + <&funnel1_in6>; + }; + }; + }; + + in-ports { + port { + apss_merge_funnel_in: endpoint { + remote-endpoint = + <&apss_funnel_out>; + }; + }; + }; + }; + + etm5: etm@7c40000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0x07c40000 0x1000>; + status = "disabled"; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + cpu = <&CPU4>; + + port{ + etm4_out: endpoint { + remote-endpoint = <&apss_funnel_in4>; + }; + }; + }; + + etm6: etm@7d40000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0x07d40000 0x1000>; + status = "disabled"; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + cpu = <&CPU5>; + + port{ + etm5_out: endpoint { + remote-endpoint = <&apss_funnel_in5>; + }; + }; + }; + + etm7: etm@7e40000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0x07e40000 0x1000>; + status = "disabled"; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + cpu = <&CPU6>; + + port{ + etm6_out: endpoint { + remote-endpoint = <&apss_funnel_in6>; + }; + }; + }; + + etm8: etm@7f40000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0x07f40000 0x1000>; + status = "disabled"; + + clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; + clock-names = "apb_pclk", "atclk"; + + cpu = <&CPU7>; + + port{ + etm7_out: endpoint { + remote-endpoint = <&apss_funnel_in7>; + }; + }; + }; + + spmi_bus: spmi@800f000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0x0800f000 0x1000>, + <0x08400000 0x1000000>, + <0x09400000 0x1000000>, + <0x0a400000 0x220000>, + <0x0800a000 0x3000>; + reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; + interrupt-names = "periph_irq"; + interrupts = <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>; + qcom,ee = <0>; + qcom,channel = <0>; + #address-cells = <2>; + #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <4>; + cell-index = <0>; }; usb3: usb@a8f8800 { @@ -1044,7 +1739,7 @@ sdhc2: sdhci@c0a4900 { compatible = "qcom,sdhci-msm-v4"; - reg = <0xc0a4900 0x314>, <0xc0a4000 0x800>; + reg = <0x0c0a4900 0x314>, <0x0c0a4000 0x800>; reg-names = "hc_mem", "core_mem"; interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, @@ -1059,6 +1754,33 @@ status = "disabled"; }; + blsp1_dma: dma@c144000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x0c144000 0x25000>; + interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + qcom,controlled-remotely; + num-channels = <18>; + qcom,num-ees = <4>; + }; + + blsp1_uart3: serial@c171000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x0c171000 0x1000>; + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp1_dma 4>, <&blsp1_dma 5>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&blsp1_uart3_on>; + status = "disabled"; + }; + blsp1_i2c1: i2c@c175000 { compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x0c175000 0x600>; @@ -1149,6 +1871,16 @@ #size-cells = <0>; }; + blsp2_uart1: serial@c1b0000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x0c1b0000 0x1000>; + interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + blsp2_i2c0: i2c@c1b5000 { compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x0c1b5000 0x600>; @@ -1239,14 +1971,44 @@ #size-cells = <0>; }; - blsp2_uart1: serial@c1b0000 { - compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; - reg = <0xc1b0000 0x1000>; - interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>, - <&gcc GCC_BLSP2_AHB_CLK>; - clock-names = "core", "iface"; + remoteproc_adsp: remoteproc@17300000 { + compatible = "qcom,msm8998-adsp-pas"; + reg = <0x17300000 0x4040>; + + interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "xo"; + + memory-region = <&adsp_mem>; + + qcom,smem-states = <&adsp_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + power-domains = <&rpmpd MSM8998_VDDCX>; + power-domain-names = "cx"; + status = "disabled"; + + glink-edge { + interrupts = <GIC_SPI 157 IRQ_TYPE_EDGE_RISING>; + label = "lpass"; + qcom,remote-pid = <2>; + mboxes = <&apcs_glb 9>; + }; + }; + + apcs_glb: mailbox@17911000 { + compatible = "qcom,msm8998-apcs-hmss-global"; + reg = <0x17911000 0x1000>; + + #mbox-cells = <1>; }; timer@17920000 { @@ -1321,73 +2083,30 @@ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; }; - ufshc: ufshc@1da4000 { - compatible = "qcom,msm8998-ufshc", "qcom,ufshc", "jedec,ufs-2.0"; - reg = <0x01da4000 0x2500>; - interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; - phys = <&ufsphy_lanes>; - phy-names = "ufsphy"; - lanes-per-direction = <2>; - power-domains = <&gcc UFS_GDSC>; - #reset-cells = <1>; - - clock-names = - "core_clk", - "bus_aggr_clk", - "iface_clk", - "core_clk_unipro", - "ref_clk", - "tx_lane0_sync_clk", - "rx_lane0_sync_clk", - "rx_lane1_sync_clk"; - clocks = - <&gcc GCC_UFS_AXI_CLK>, - <&gcc GCC_AGGRE1_UFS_AXI_CLK>, - <&gcc GCC_UFS_AHB_CLK>, - <&gcc GCC_UFS_UNIPRO_CORE_CLK>, - <&rpmcc RPM_SMD_LN_BB_CLK1>, - <&gcc GCC_UFS_TX_SYMBOL_0_CLK>, - <&gcc GCC_UFS_RX_SYMBOL_0_CLK>, - <&gcc GCC_UFS_RX_SYMBOL_1_CLK>; - freq-table-hz = - <50000000 200000000>, - <0 0>, - <0 0>, - <37500000 150000000>, - <0 0>, - <0 0>, - <0 0>, - <0 0>; - - resets = <&gcc GCC_UFS_BCR>; - reset-names = "rst"; - }; - - ufsphy: phy@1da7000 { - compatible = "qcom,msm8998-qmp-ufs-phy"; - reg = <0x01da7000 0x18c>; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - clock-names = - "ref", - "ref_aux"; - clocks = - <&gcc GCC_UFS_CLKREF_CLK>, - <&gcc GCC_UFS_PHY_AUX_CLK>; - - reset-names = "ufsphy"; - resets = <&ufshc 0>; - - ufsphy_lanes: lanes@1da7400 { - reg = <0x01da7400 0x128>, - <0x01da7600 0x1fc>, - <0x01da7c00 0x1dc>, - <0x01da7800 0x128>, - <0x01da7a00 0x1fc>; - #phy-cells = <0>; - }; + wifi: wifi@18800000 { + compatible = "qcom,wcn3990-wifi"; + status = "disabled"; + reg = <0x18800000 0x800000>; + reg-names = "membase"; + memory-region = <&wlan_msa_mem>; + clocks = <&rpmcc RPM_SMD_RF_CLK2_PIN>; + clock-names = "cxo_ref_clk_pin"; + interrupts = + <GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&anoc2_smmu 0x1900>, + <&anoc2_smmu 0x1901>; + qcom,snoc-host-cap-8bit-quirk; }; }; }; diff --git a/arch/arm64/boot/dts/qcom/pm6150.dtsi b/arch/arm64/boot/dts/qcom/pm6150.dtsi new file mode 100644 index 000000000000..23534639f455 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/pm6150.dtsi @@ -0,0 +1,72 @@ +// SPDX-License-Identifier: BSD-3-Clause +// Copyright (c) 2019, The Linux Foundation. All rights reserved. + +#include <dt-bindings/iio/qcom,spmi-vadc.h> +#include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/spmi/spmi.h> +#include <dt-bindings/thermal/thermal.h> + +&spmi_bus { + pm6150_lsid0: pmic@0 { + compatible = "qcom,pm6150", "qcom,spmi-pmic"; + reg = <0x0 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm6150_pon: pon@800 { + compatible = "qcom,pm8998-pon"; + reg = <0x800>; + mode-bootloader = <0x2>; + mode-recovery = <0x1>; + + pwrkey { + compatible = "qcom,pm8941-pwrkey"; + interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + linux,code = <KEY_POWER>; + }; + }; + + pm6150_temp: temp-alarm@2400 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0x2400>; + interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_RISING>; + io-channels = <&pm6150_adc ADC5_DIE_TEMP>; + io-channel-names = "thermal"; + #thermal-sensor-cells = <0>; + }; + + pm6150_adc: adc@3100 { + compatible = "qcom,spmi-adc5"; + reg = <0x3100>; + interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + #io-channel-cells = <1>; + + adc-chan@6 { + reg = <ADC5_DIE_TEMP>; + label = "die_temp"; + }; + }; + + pm6150_gpio: gpios@c000 { + compatible = "qcom,pm6150-gpio", "qcom,spmi-gpio"; + reg = <0xc000>; + gpio-controller; + gpio-ranges = <&pm6150_gpio 0 0 10>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pm6150_lsid1: pmic@1 { + compatible = "qcom,pm6150", "qcom,spmi-pmic"; + reg = <0x1 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/pm6150l.dtsi b/arch/arm64/boot/dts/qcom/pm6150l.dtsi new file mode 100644 index 000000000000..f84027b505d1 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/pm6150l.dtsi @@ -0,0 +1,31 @@ +// SPDX-License-Identifier: BSD-3-Clause +// Copyright (c) 2019, The Linux Foundation. All rights reserved. + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/spmi/spmi.h> + +&spmi_bus { + pm6150l_lsid4: pmic@4 { + compatible = "qcom,pm6150l", "qcom,spmi-pmic"; + reg = <0x4 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm6150l_gpio: gpios@c000 { + compatible = "qcom,pm6150l-gpio", "qcom,spmi-gpio"; + reg = <0xc000>; + gpio-controller; + gpio-ranges = <&pm6150l_gpio 0 0 12>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pm6150l_lsid5: pmic@5 { + compatible = "qcom,pm6150l", "qcom,spmi-pmic"; + reg = <0x5 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/pm8004.dtsi b/arch/arm64/boot/dts/qcom/pm8004.dtsi index 297b57bfa87a..0abd1abe12fc 100644 --- a/arch/arm64/boot/dts/qcom/pm8004.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8004.dtsi @@ -4,17 +4,23 @@ &spmi_bus { - pmic@4 { + pm8004_lsid4: pmic@4 { compatible = "qcom,pm8004", "qcom,spmi-pmic"; reg = <0x4 SPMI_USID>; #address-cells = <1>; #size-cells = <0>; + status = "disabled"; }; - pmic@5 { + pm8004_lsid5: pmic@5 { compatible = "qcom,pm8004", "qcom,spmi-pmic"; reg = <0x5 SPMI_USID>; #address-cells = <1>; #size-cells = <0>; + status = "disabled"; + + pm8004_spmi_regulators: regulators { + compatible = "qcom,pm8004-regulators"; + }; }; }; diff --git a/arch/arm64/boot/dts/qcom/pm8150.dtsi b/arch/arm64/boot/dts/qcom/pm8150.dtsi new file mode 100644 index 000000000000..b6e304748a57 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/pm8150.dtsi @@ -0,0 +1,97 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved. + * Copyright (c) 2019, Linaro Limited + */ + +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/spmi/spmi.h> +#include <dt-bindings/iio/qcom,spmi-vadc.h> + +&spmi_bus { + pm8150_0: pmic@0 { + compatible = "qcom,pm8150", "qcom,spmi-pmic"; + reg = <0x0 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pon: power-on@800 { + compatible = "qcom,pm8916-pon"; + reg = <0x0800>; + pwrkey { + compatible = "qcom,pm8941-pwrkey"; + interrupts = <0x0 0x8 0x0 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + linux,code = <KEY_POWER>; + + status = "disabled"; + }; + }; + + pm8150_adc: adc@3100 { + compatible = "qcom,spmi-adc5"; + reg = <0x3100>; + #address-cells = <1>; + #size-cells = <0>; + #io-channel-cells = <1>; + interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>; + + status = "disabled"; + + ref-gnd@0 { + reg = <ADC5_REF_GND>; + qcom,pre-scaling = <1 1>; + label = "ref_gnd"; + }; + + vref-1p25@1 { + reg = <ADC5_1P25VREF>; + qcom,pre-scaling = <1 1>; + label = "vref_1p25"; + }; + + die-temp@6 { + reg = <ADC5_DIE_TEMP>; + qcom,pre-scaling = <1 1>; + label = "die_temp"; + }; + }; + + rtc@6000 { + compatible = "qcom,pm8941-rtc"; + reg = <0x6000>; + reg-names = "rtc", "alarm"; + interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>; + + status = "disabled"; + }; + + pm8150_gpios: gpio@c000 { + compatible = "qcom,pm8150-gpio"; + reg = <0xc000>; + gpio-controller; + #gpio-cells = <2>; + interrupts = <0x0 0xc0 0x0 IRQ_TYPE_NONE>, + <0x0 0xc1 0x0 IRQ_TYPE_NONE>, + <0x0 0xc2 0x0 IRQ_TYPE_NONE>, + <0x0 0xc3 0x0 IRQ_TYPE_NONE>, + <0x0 0xc4 0x0 IRQ_TYPE_NONE>, + <0x0 0xc5 0x0 IRQ_TYPE_NONE>, + <0x0 0xc6 0x0 IRQ_TYPE_NONE>, + <0x0 0xc7 0x0 IRQ_TYPE_NONE>, + <0x0 0xc8 0x0 IRQ_TYPE_NONE>, + <0x0 0xc9 0x0 IRQ_TYPE_NONE>, + <0x0 0xca 0x0 IRQ_TYPE_NONE>, + <0x0 0xcb 0x0 IRQ_TYPE_NONE>; + }; + }; + + pmic@1 { + compatible = "qcom,pm8150", "qcom,spmi-pmic"; + reg = <0x1 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/pm8150b.dtsi b/arch/arm64/boot/dts/qcom/pm8150b.dtsi new file mode 100644 index 000000000000..322379d5c31f --- /dev/null +++ b/arch/arm64/boot/dts/qcom/pm8150b.dtsi @@ -0,0 +1,86 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved. + * Copyright (c) 2019, Linaro Limited + */ + +#include <dt-bindings/iio/qcom,spmi-vadc.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/spmi/spmi.h> + +&spmi_bus { + pmic@2 { + compatible = "qcom,pm8150b", "qcom,spmi-pmic"; + reg = <0x2 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + power-on@800 { + compatible = "qcom,pm8916-pon"; + reg = <0x0800>; + + status = "disabled"; + }; + + adc@3100 { + compatible = "qcom,spmi-adc5"; + reg = <0x3100>; + #address-cells = <1>; + #size-cells = <0>; + #io-channel-cells = <1>; + interrupts = <0x2 0x31 0x0 IRQ_TYPE_EDGE_RISING>; + + status = "disabled"; + + ref-gnd@0 { + reg = <ADC5_REF_GND>; + qcom,pre-scaling = <1 1>; + label = "ref_gnd"; + }; + + vref-1p25@1 { + reg = <ADC5_1P25VREF>; + qcom,pre-scaling = <1 1>; + label = "vref_1p25"; + }; + + die-temp@6 { + reg = <ADC5_DIE_TEMP>; + qcom,pre-scaling = <1 1>; + label = "die_temp"; + }; + + chg-temp@9 { + reg = <ADC5_CHG_TEMP>; + qcom,pre-scaling = <1 1>; + label = "chg_temp"; + }; + }; + + pm8150b_gpios: gpio@c000 { + compatible = "qcom,pm8150b-gpio"; + reg = <0xc000>; + gpio-controller; + #gpio-cells = <2>; + interrupts = <0x2 0xc0 0x0 IRQ_TYPE_NONE>, + <0x2 0xc1 0x0 IRQ_TYPE_NONE>, + <0x2 0xc2 0x0 IRQ_TYPE_NONE>, + <0x2 0xc3 0x0 IRQ_TYPE_NONE>, + <0x2 0xc4 0x0 IRQ_TYPE_NONE>, + <0x2 0xc5 0x0 IRQ_TYPE_NONE>, + <0x2 0xc6 0x0 IRQ_TYPE_NONE>, + <0x2 0xc7 0x0 IRQ_TYPE_NONE>, + <0x2 0xc8 0x0 IRQ_TYPE_NONE>, + <0x2 0xc9 0x0 IRQ_TYPE_NONE>, + <0x2 0xca 0x0 IRQ_TYPE_NONE>, + <0x2 0xcb 0x0 IRQ_TYPE_NONE>; + }; + }; + + pmic@3 { + compatible = "qcom,pm8150b", "qcom,spmi-pmic"; + reg = <0x3 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/pm8150l.dtsi b/arch/arm64/boot/dts/qcom/pm8150l.dtsi new file mode 100644 index 000000000000..eb0e9a090e42 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/pm8150l.dtsi @@ -0,0 +1,80 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved. + * Copyright (c) 2019, Linaro Limited + */ + +#include <dt-bindings/iio/qcom,spmi-vadc.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/spmi/spmi.h> + +&spmi_bus { + pmic@4 { + compatible = "qcom,pm8150l", "qcom,spmi-pmic"; + reg = <0x4 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + power-on@800 { + compatible = "qcom,pm8916-pon"; + reg = <0x0800>; + + status = "disabled"; + }; + + adc@3100 { + compatible = "qcom,spmi-adc5"; + reg = <0x3100>; + #address-cells = <1>; + #size-cells = <0>; + #io-channel-cells = <1>; + interrupts = <0x4 0x31 0x0 IRQ_TYPE_EDGE_RISING>; + + status = "disabled"; + + ref-gnd@0 { + reg = <ADC5_REF_GND>; + qcom,pre-scaling = <1 1>; + label = "ref_gnd"; + }; + + vref-1p25@1 { + reg = <ADC5_1P25VREF>; + qcom,pre-scaling = <1 1>; + label = "vref_1p25"; + }; + + die-temp@6 { + reg = <ADC5_DIE_TEMP>; + qcom,pre-scaling = <1 1>; + label = "die_temp"; + }; + }; + + pm8150l_gpios: gpio@c000 { + compatible = "qcom,pm8150l-gpio"; + reg = <0xc000>; + gpio-controller; + #gpio-cells = <2>; + interrupts = <0x4 0xc0 0x0 IRQ_TYPE_NONE>, + <0x4 0xc1 0x0 IRQ_TYPE_NONE>, + <0x4 0xc2 0x0 IRQ_TYPE_NONE>, + <0x4 0xc3 0x0 IRQ_TYPE_NONE>, + <0x4 0xc4 0x0 IRQ_TYPE_NONE>, + <0x4 0xc5 0x0 IRQ_TYPE_NONE>, + <0x4 0xc6 0x0 IRQ_TYPE_NONE>, + <0x4 0xc7 0x0 IRQ_TYPE_NONE>, + <0x4 0xc8 0x0 IRQ_TYPE_NONE>, + <0x4 0xc9 0x0 IRQ_TYPE_NONE>, + <0x4 0xca 0x0 IRQ_TYPE_NONE>, + <0x4 0xcb 0x0 IRQ_TYPE_NONE>; + }; + }; + + pmic@5 { + compatible = "qcom,pm8150l", "qcom,spmi-pmic"; + reg = <0x5 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/pm8916.dtsi b/arch/arm64/boot/dts/qcom/pm8916.dtsi index 9dd2df1cbf47..0bcdf0471107 100644 --- a/arch/arm64/boot/dts/qcom/pm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8916.dtsi @@ -111,6 +111,12 @@ #address-cells = <1>; #size-cells = <0>; + pm8916_vib: vibrator@c000 { + compatible = "qcom,pm8916-vib"; + reg = <0xc000>; + status = "disabled"; + }; + wcd_codec: codec@f000 { compatible = "qcom,pm8916-wcd-analog-codec"; reg = <0xf000 0x200>; diff --git a/arch/arm64/boot/dts/qcom/pm8994.dtsi b/arch/arm64/boot/dts/qcom/pm8994.dtsi index 76b5a3e6a2b5..7e4f777746cb 100644 --- a/arch/arm64/boot/dts/qcom/pm8994.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8994.dtsi @@ -85,5 +85,9 @@ reg = <0x1 SPMI_USID>; #address-cells = <1>; #size-cells = <0>; + + pm8994_spmi_regulators: regulators { + compatible = "qcom,pm8994-regulators"; + }; }; }; diff --git a/arch/arm64/boot/dts/qcom/pm8998.dtsi b/arch/arm64/boot/dts/qcom/pm8998.dtsi index 051a52df80f9..dc2ce23cde05 100644 --- a/arch/arm64/boot/dts/qcom/pm8998.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8998.dtsi @@ -78,7 +78,7 @@ #size-cells = <0>; #io-channel-cells = <1>; - adc-chan@ADC5_DIE_TEMP { + adc-chan@6 { reg = <ADC5_DIE_TEMP>; label = "die_temp"; }; diff --git a/arch/arm64/boot/dts/qcom/pms405.dtsi b/arch/arm64/boot/dts/qcom/pms405.dtsi index 14240fedd916..ff4005186895 100644 --- a/arch/arm64/boot/dts/qcom/pms405.dtsi +++ b/arch/arm64/boot/dts/qcom/pms405.dtsi @@ -88,41 +88,41 @@ #size-cells = <0>; #io-channel-cells = <1>; - ref_gnd { + ref_gnd@0 { reg = <ADC5_REF_GND>; qcom,pre-scaling = <1 1>; }; - vref_1p25 { + vref_1p25@1 { reg = <ADC5_1P25VREF>; qcom,pre-scaling = <1 1>; }; - pon_1: vph_pwr { + pon_1: vph_pwr@131 { reg = <ADC5_VPH_PWR>; qcom,pre-scaling = <1 3>; }; - die_temp { + die_temp@6 { reg = <ADC5_DIE_TEMP>; qcom,pre-scaling = <1 1>; }; - pa_therm1: thermistor1 { + pa_therm1: thermistor1@77 { reg = <ADC5_AMUX_THM1_100K_PU>; qcom,ratiometric; qcom,hw-settle-time = <200>; qcom,pre-scaling = <1 1>; }; - pa_therm3: thermistor3 { + pa_therm3: thermistor3@79 { reg = <ADC5_AMUX_THM3_100K_PU>; qcom,ratiometric; qcom,hw-settle-time = <200>; qcom,pre-scaling = <1 1>; }; - xo_therm: xo_temp { + xo_therm: xo_temp@76 { reg = <ADC5_XO_THERM_100K_PU>; qcom,ratiometric; qcom,hw-settle-time = <200>; @@ -141,8 +141,6 @@ pms405_1: pms405@1 { compatible = "qcom,spmi-pmic"; reg = <0x1 SPMI_USID>; - #address-cells = <1>; - #size-cells = <0>; pms405_spmi_regulators: regulators { compatible = "qcom,pms405-regulators"; diff --git a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi index 11c0a7137823..522d3ef72df5 100644 --- a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi +++ b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi @@ -61,7 +61,9 @@ protected-clocks = <GCC_BIMC_CDSP_CLK>, <GCC_CDSP_CFG_AHB_CLK>, <GCC_CDSP_BIMC_CLK_SRC>, - <GCC_CDSP_TBU_CLK>; + <GCC_CDSP_TBU_CLK>, + <141>, /* GCC_WCSS_Q6_AHB_CLK */ + <142>; /* GCC_WCSS_Q6_AXIM_CLK */ }; &pms405_spmi_regulators { @@ -71,6 +73,7 @@ regulator-always-on; regulator-boot-on; regulator-name = "vdd_apc"; + regulator-initial-mode = <1>; regulator-min-microvolt = <1048000>; regulator-max-microvolt = <1384000>; }; @@ -270,6 +273,9 @@ &wifi { status = "okay"; + vdd-0.8-cx-mx-supply = <&vreg_l2_1p275>; + vdd-1.8-xo-supply = <&vreg_l5_1p8>; + vdd-1.3-rfa-supply = <&vreg_l1_1p3>; }; /* PINCTRL - additions to nodes defined in qcs404.dtsi */ diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi index 3d0789775009..4ee1e3d5f123 100644 --- a/arch/arm64/boot/dts/qcom/qcs404.dtsi +++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi @@ -22,6 +22,12 @@ #clock-cells = <0>; clock-frequency = <19200000>; }; + + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; }; cpus { @@ -36,6 +42,10 @@ cpu-idle-states = <&CPU_SLEEP_0>; next-level-cache = <&L2_0>; #cooling-cells = <2>; + clocks = <&apcs_glb>; + operating-points-v2 = <&cpu_opp_table>; + power-domains = <&cpr>; + power-domain-names = "cpr"; }; CPU1: cpu@101 { @@ -46,6 +56,10 @@ cpu-idle-states = <&CPU_SLEEP_0>; next-level-cache = <&L2_0>; #cooling-cells = <2>; + clocks = <&apcs_glb>; + operating-points-v2 = <&cpu_opp_table>; + power-domains = <&cpr>; + power-domain-names = "cpr"; }; CPU2: cpu@102 { @@ -56,6 +70,10 @@ cpu-idle-states = <&CPU_SLEEP_0>; next-level-cache = <&L2_0>; #cooling-cells = <2>; + clocks = <&apcs_glb>; + operating-points-v2 = <&cpu_opp_table>; + power-domains = <&cpr>; + power-domain-names = "cpr"; }; CPU3: cpu@103 { @@ -66,6 +84,10 @@ cpu-idle-states = <&CPU_SLEEP_0>; next-level-cache = <&L2_0>; #cooling-cells = <2>; + clocks = <&apcs_glb>; + operating-points-v2 = <&cpu_opp_table>; + power-domains = <&cpr>; + power-domain-names = "cpr"; }; L2_0: l2-cache { @@ -88,6 +110,41 @@ }; }; + cpu_opp_table: cpu-opp-table { + compatible = "operating-points-v2-kryo-cpu"; + opp-shared; + + opp-1094400000 { + opp-hz = /bits/ 64 <1094400000>; + required-opps = <&cpr_opp1>; + }; + opp-1248000000 { + opp-hz = /bits/ 64 <1248000000>; + required-opps = <&cpr_opp2>; + }; + opp-1401600000 { + opp-hz = /bits/ 64 <1401600000>; + required-opps = <&cpr_opp3>; + }; + }; + + cpr_opp_table: cpr-opp-table { + compatible = "operating-points-v2-qcom-level"; + + cpr_opp1: opp1 { + opp-level = <1>; + qcom,opp-fuse-level = <1>; + }; + cpr_opp2: opp2 { + opp-level = <2>; + qcom,opp-fuse-level = <2>; + }; + cpr_opp3: opp3 { + opp-level = <3>; + qcom,opp-fuse-level = <3>; + }; + }; + firmware { scm: scm { compatible = "qcom,scm-qcs404", "qcom,scm"; @@ -111,8 +168,13 @@ #size-cells = <2>; ranges; - memory@85600000 { - reg = <0 0x85600000 0 0x90000>; + tz_apps_mem: memory@85900000 { + reg = <0 0x85900000 0 0x500000>; + no-map; + }; + + xbl_mem: memory@85e00000 { + reg = <0 0x85e00000 0 0x100000>; no-map; }; @@ -121,28 +183,33 @@ no-map; }; - memory@86100000 { + tz_mem: memory@86100000 { reg = <0 0x86100000 0 0x300000>; no-map; }; wlan_fw_mem: memory@86400000 { - reg = <0 0x86400000 0 0x1c00000>; + reg = <0 0x86400000 0 0x1100000>; no-map; }; - adsp_fw_mem: memory@88000000 { - reg = <0 0x88000000 0 0x1a00000>; + adsp_fw_mem: memory@87500000 { + reg = <0 0x87500000 0 0x1a00000>; no-map; }; - cdsp_fw_mem: memory@89a00000 { - reg = <0 0x89a00000 0 0x600000>; + cdsp_fw_mem: memory@88f00000 { + reg = <0 0x88f00000 0 0x600000>; no-map; }; - wlan_msa_mem: memory@8a000000 { - reg = <0 0x8a000000 0 0x100000>; + wlan_msa_mem: memory@89500000 { + reg = <0 0x89500000 0 0x100000>; + no-map; + }; + + uefi_mem: memory@9f800000 { + reg = <0 0x9f800000 0 0x800000>; no-map; }; }; @@ -264,6 +331,62 @@ tsens_caldata: caldata@d0 { reg = <0x1f8 0x14>; }; + cpr_efuse_speedbin: speedbin@13c { + reg = <0x13c 0x4>; + bits = <2 3>; + }; + cpr_efuse_quot_offset1: qoffset1@231 { + reg = <0x231 0x4>; + bits = <4 7>; + }; + cpr_efuse_quot_offset2: qoffset2@232 { + reg = <0x232 0x4>; + bits = <3 7>; + }; + cpr_efuse_quot_offset3: qoffset3@233 { + reg = <0x233 0x4>; + bits = <2 7>; + }; + cpr_efuse_init_voltage1: ivoltage1@229 { + reg = <0x229 0x4>; + bits = <4 6>; + }; + cpr_efuse_init_voltage2: ivoltage2@22a { + reg = <0x22a 0x4>; + bits = <2 6>; + }; + cpr_efuse_init_voltage3: ivoltage3@22b { + reg = <0x22b 0x4>; + bits = <0 6>; + }; + cpr_efuse_quot1: quot1@22b { + reg = <0x22b 0x4>; + bits = <6 12>; + }; + cpr_efuse_quot2: quot2@22d { + reg = <0x22d 0x4>; + bits = <2 12>; + }; + cpr_efuse_quot3: quot3@230 { + reg = <0x230 0x4>; + bits = <0 12>; + }; + cpr_efuse_ring1: ring1@228 { + reg = <0x228 0x4>; + bits = <0 3>; + }; + cpr_efuse_ring2: ring2@228 { + reg = <0x228 0x4>; + bits = <4 3>; + }; + cpr_efuse_ring3: ring3@229 { + reg = <0x229 0x4>; + bits = <0 3>; + }; + cpr_efuse_revision: revision@218 { + reg = <0x218 0x4>; + bits = <3 3>; + }; }; rng: rng@e3000 { @@ -273,6 +396,15 @@ clock-names = "core"; }; + bimc: interconnect@400000 { + reg = <0x00400000 0x80000>; + compatible = "qcom,qcs404-bimc"; + #interconnect-cells = <1>; + clock-names = "bus", "bus_a"; + clocks = <&rpmcc RPM_SMD_BIMC_CLK>, + <&rpmcc RPM_SMD_BIMC_A_CLK>; + }; + tsens: thermal-sensor@4a9000 { compatible = "qcom,qcs404-tsens", "qcom,tsens-v1"; reg = <0x004a9000 0x1000>, /* TM */ @@ -280,9 +412,29 @@ nvmem-cells = <&tsens_caldata>; nvmem-cell-names = "calib"; #qcom,sensors = <10>; + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow"; #thermal-sensor-cells = <1>; }; + pcnoc: interconnect@500000 { + reg = <0x00500000 0x15080>; + compatible = "qcom,qcs404-pcnoc"; + #interconnect-cells = <1>; + clock-names = "bus", "bus_a"; + clocks = <&rpmcc RPM_SMD_PNOC_CLK>, + <&rpmcc RPM_SMD_PNOC_A_CLK>; + }; + + snoc: interconnect@580000 { + reg = <0x00580000 0x23080>; + compatible = "qcom,qcs404-snoc"; + #interconnect-cells = <1>; + clock-names = "bus", "bus_a"; + clocks = <&rpmcc RPM_SMD_SNOC_CLK>, + <&rpmcc RPM_SMD_SNOC_A_CLK>; + }; + remoteproc_cdsp: remoteproc@b00000 { compatible = "qcom,qcs404-cdsp-pas"; reg = <0x00b00000 0x4040>; @@ -857,6 +1009,63 @@ compatible = "qcom,qcs404-apcs-apps-global", "syscon"; reg = <0x0b011000 0x1000>; #mbox-cells = <1>; + clocks = <&apcs_hfpll>, <&gcc GCC_GPLL0_AO_OUT_MAIN>; + clock-names = "pll", "aux"; + #clock-cells = <0>; + }; + + apcs_hfpll: clock-controller@b016000 { + compatible = "qcom,hfpll"; + reg = <0x0b016000 0x30>; + #clock-cells = <0>; + clock-output-names = "apcs_hfpll"; + clocks = <&xo_board>; + clock-names = "xo"; + }; + + watchdog@b017000 { + compatible = "qcom,apss-wdt-qcs404", "qcom,kpss-wdt"; + reg = <0x0b017000 0x1000>; + clocks = <&sleep_clk>; + }; + + cpr: power-controller@b018000 { + compatible = "qcom,qcs404-cpr", "qcom,cpr"; + reg = <0x0b018000 0x1000>; + interrupts = <0 15 IRQ_TYPE_EDGE_RISING>; + clocks = <&xo_board>; + clock-names = "ref"; + vdd-apc-supply = <&pms405_s3>; + #power-domain-cells = <0>; + operating-points-v2 = <&cpr_opp_table>; + acc-syscon = <&tcsr>; + + nvmem-cells = <&cpr_efuse_quot_offset1>, + <&cpr_efuse_quot_offset2>, + <&cpr_efuse_quot_offset3>, + <&cpr_efuse_init_voltage1>, + <&cpr_efuse_init_voltage2>, + <&cpr_efuse_init_voltage3>, + <&cpr_efuse_quot1>, + <&cpr_efuse_quot2>, + <&cpr_efuse_quot3>, + <&cpr_efuse_ring1>, + <&cpr_efuse_ring2>, + <&cpr_efuse_ring3>, + <&cpr_efuse_revision>; + nvmem-cell-names = "cpr_quotient_offset1", + "cpr_quotient_offset2", + "cpr_quotient_offset3", + "cpr_init_voltage1", + "cpr_init_voltage2", + "cpr_init_voltage3", + "cpr_quotient1", + "cpr_quotient2", + "cpr_quotient3", + "cpr_ring_osc1", + "cpr_ring_osc2", + "cpr_ring_osc3", + "cpr_fuse_revision"; }; timer@b120000 { @@ -1077,7 +1286,7 @@ thermal-sensors = <&tsens 0>; trips { - aoss_alert0: trip-point@0 { + aoss_alert0: trip-point0 { temperature = <105000>; hysteresis = <2000>; type = "hot"; @@ -1092,7 +1301,7 @@ thermal-sensors = <&tsens 1>; trips { - q6_hvx_alert0: trip-point@0 { + q6_hvx_alert0: trip-point0 { temperature = <105000>; hysteresis = <2000>; type = "hot"; @@ -1107,7 +1316,7 @@ thermal-sensors = <&tsens 2>; trips { - lpass_alert0: trip-point@0 { + lpass_alert0: trip-point0 { temperature = <105000>; hysteresis = <2000>; type = "hot"; @@ -1122,7 +1331,7 @@ thermal-sensors = <&tsens 3>; trips { - wlan_alert0: trip-point@0 { + wlan_alert0: trip-point0 { temperature = <105000>; hysteresis = <2000>; type = "hot"; @@ -1137,12 +1346,12 @@ thermal-sensors = <&tsens 4>; trips { - cluster_alert0: trip-point@0 { + cluster_alert0: trip-point0 { temperature = <95000>; hysteresis = <2000>; type = "hot"; }; - cluster_alert1: trip-point@1 { + cluster_alert1: trip-point1 { temperature = <105000>; hysteresis = <2000>; type = "passive"; @@ -1171,12 +1380,12 @@ thermal-sensors = <&tsens 5>; trips { - cpu0_alert0: trip-point@0 { + cpu0_alert0: trip-point0 { temperature = <95000>; hysteresis = <2000>; type = "hot"; }; - cpu0_alert1: trip-point@1 { + cpu0_alert1: trip-point1 { temperature = <105000>; hysteresis = <2000>; type = "passive"; @@ -1205,12 +1414,12 @@ thermal-sensors = <&tsens 6>; trips { - cpu1_alert0: trip-point@0 { + cpu1_alert0: trip-point0 { temperature = <95000>; hysteresis = <2000>; type = "hot"; }; - cpu1_alert1: trip-point@1 { + cpu1_alert1: trip-point1 { temperature = <105000>; hysteresis = <2000>; type = "passive"; @@ -1239,12 +1448,12 @@ thermal-sensors = <&tsens 7>; trips { - cpu2_alert0: trip-point@0 { + cpu2_alert0: trip-point0 { temperature = <95000>; hysteresis = <2000>; type = "hot"; }; - cpu2_alert1: trip-point@1 { + cpu2_alert1: trip-point1 { temperature = <105000>; hysteresis = <2000>; type = "passive"; @@ -1273,12 +1482,12 @@ thermal-sensors = <&tsens 8>; trips { - cpu3_alert0: trip-point@0 { + cpu3_alert0: trip-point0 { temperature = <95000>; hysteresis = <2000>; type = "hot"; }; - cpu3_alert1: trip-point@1 { + cpu3_alert1: trip-point1 { temperature = <105000>; hysteresis = <2000>; type = "passive"; @@ -1307,7 +1516,7 @@ thermal-sensors = <&tsens 9>; trips { - gpu_alert0: trip-point@0 { + gpu_alert0: trip-point0 { temperature = <95000>; hysteresis = <2000>; type = "hot"; diff --git a/arch/arm64/boot/dts/qcom/sc7180-idp.dts b/arch/arm64/boot/dts/qcom/sc7180-idp.dts new file mode 100644 index 000000000000..388f50ad4fde --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-idp.dts @@ -0,0 +1,430 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * SC7180 IDP board device tree source + * + * Copyright (c) 2019, The Linux Foundation. All rights reserved. + */ + +/dts-v1/; + +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include "sc7180.dtsi" +#include "pm6150.dtsi" +#include "pm6150l.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. SC7180 IDP"; + compatible = "qcom,sc7180-idp", "qcom,sc7180"; + + aliases { + hsuart0 = &uart3; + serial0 = &uart8; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&apps_rsc { + pm6150-rpmh-regulators { + compatible = "qcom,pm6150-rpmh-regulators"; + qcom,pmic-id = "a"; + + vreg_s1a_1p1: smps1 { + regulator-min-microvolt = <1128000>; + regulator-max-microvolt = <1128000>; + }; + + vreg_s4a_1p0: smps4 { + regulator-min-microvolt = <824000>; + regulator-max-microvolt = <1120000>; + }; + + vreg_s5a_2p0: smps5 { + regulator-min-microvolt = <1744000>; + regulator-max-microvolt = <2040000>; + }; + + vreg_l1a_1p2: ldo1 { + regulator-min-microvolt = <1178000>; + regulator-max-microvolt = <1256000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l2a_1p0: ldo2 { + regulator-min-microvolt = <944000>; + regulator-max-microvolt = <1056000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l3a_1p0: ldo3 { + regulator-min-microvolt = <968000>; + regulator-max-microvolt = <1064000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l4a_0p8: ldo4 { + regulator-min-microvolt = <824000>; + regulator-max-microvolt = <928000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l5a_2p7: ldo5 { + regulator-min-microvolt = <2496000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l6a_0p6: ldo6 { + regulator-min-microvolt = <568000>; + regulator-max-microvolt = <648000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l9a_0p6: ldo9 { + regulator-min-microvolt = <488000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l10a_1p8: ldo10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1832000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l11a_1p8: ldo11 { + regulator-min-microvolt = <1696000>; + regulator-max-microvolt = <1904000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l12a_1p8: ldo12 { + regulator-min-microvolt = <1696000>; + regulator-max-microvolt = <1952000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l13a_1p8: ldo13 { + regulator-min-microvolt = <1696000>; + regulator-max-microvolt = <1904000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l14a_1p8: ldo14 { + regulator-min-microvolt = <1728000>; + regulator-max-microvolt = <1832000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l15a_1p8: ldo15 { + regulator-min-microvolt = <1696000>; + regulator-max-microvolt = <1904000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l16a_2p7: ldo16 { + regulator-min-microvolt = <2496000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l17a_3p0: ldo17 { + regulator-min-microvolt = <2920000>; + regulator-max-microvolt = <3232000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l18a_2p8: ldo18 { + regulator-min-microvolt = <2496000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l19a_2p9: ldo19 { + regulator-min-microvolt = <2696000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + }; + + pm6150l-rpmh-regulators { + compatible = "qcom,pm6150l-rpmh-regulators"; + qcom,pmic-id = "c"; + + vreg_s8c_1p3: smps8 { + regulator-min-microvolt = <1120000>; + regulator-max-microvolt = <1408000>; + }; + + vreg_l1c_1p8: ldo1 { + regulator-min-microvolt = <1616000>; + regulator-max-microvolt = <1984000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l2c_1p3: ldo2 { + regulator-min-microvolt = <1168000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l3c_1p2: ldo3 { + regulator-min-microvolt = <1144000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l4c_1p8: ldo4 { + regulator-min-microvolt = <1648000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l5c_1p8: ldo5 { + regulator-min-microvolt = <1648000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l6c_2p9: ldo6 { + regulator-min-microvolt = <2696000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l7c_3p0: ldo7 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l8c_1p8: ldo8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1904000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l9c_2p9: ldo9 { + regulator-min-microvolt = <2952000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l10c_3p3: ldo10 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3400000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l11c_3p3: ldo11 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3400000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_bob: bob { + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + }; + }; +}; + +&qspi { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&qspi_clk &qspi_cs0 &qspi_data01>; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <25000000>; + spi-tx-bus-width = <2>; + spi-rx-bus-width = <2>; + }; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&uart8 { + status = "okay"; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "host"; +}; + +&usb_1_hsphy { + status = "okay"; + vdd-supply = <&vreg_l4a_0p8>; + vdda-pll-supply = <&vreg_l11a_1p8>; + vdda-phy-dpdm-supply = <&vreg_l17a_3p0>; + qcom,imp-res-offset-value = <8>; + qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>; + qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>; + qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>; +}; + +&usb_1_qmpphy { + status = "okay"; + vdda-phy-supply = <&vreg_l3c_1p2>; + vdda-pll-supply = <&vreg_l4a_0p8>; +}; + +/* PINCTRL - additions to nodes defined in sc7180.dtsi */ + +&qspi_clk { + pinconf { + pins = "gpio63"; + bias-disable; + }; +}; + +&qspi_cs0 { + pinconf { + pins = "gpio68"; + bias-disable; + }; +}; + +&qspi_data01 { + pinconf { + pins = "gpio64", "gpio65"; + + /* High-Z when no transfers; nice to park the lines */ + bias-pull-up; + }; +}; + +&qup_i2c2_default { + pinconf { + pins = "gpio15", "gpio16"; + drive-strength = <2>; + + /* Has external pullup */ + bias-disable; + }; +}; + +&qup_i2c4_default { + pinconf { + pins = "gpio115", "gpio116"; + drive-strength = <2>; + + /* Has external pullup */ + bias-disable; + }; +}; + +&qup_i2c7_default { + pinconf { + pins = "gpio6", "gpio7"; + drive-strength = <2>; + + /* Has external pullup */ + bias-disable; + }; +}; + +&qup_i2c9_default { + pinconf { + pins = "gpio46", "gpio47"; + drive-strength = <2>; + + /* Has external pullup */ + bias-disable; + }; +}; + +&qup_uart3_default { + pinconf-cts { + /* + * Configure a pull-down on 38 (CTS) to match the pull of + * the Bluetooth module. + */ + pins = "gpio38"; + bias-pull-down; + output-high; + }; + + pinconf-rts { + /* We'll drive 39 (RTS), so no pull */ + pins = "gpio39"; + drive-strength = <2>; + bias-disable; + }; + + pinconf-tx { + /* We'll drive 40 (TX), so no pull */ + pins = "gpio40"; + drive-strength = <2>; + bias-disable; + output-high; + }; + + pinconf-rx { + /* + * Configure a pull-up on 41 (RX). This is needed to avoid + * garbage data when the TX pin of the Bluetooth module is + * in tri-state (module powered off or not driving the + * signal yet). + */ + pins = "gpio41"; + bias-pull-up; + }; +}; + +&qup_uart8_default { + pinconf-tx { + pins = "gpio44"; + drive-strength = <2>; + bias-disable; + }; + + pinconf-rx { + pins = "gpio45"; + drive-strength = <2>; + bias-pull-up; + }; +}; + +&qup_spi0_default { + pinconf { + pins = "gpio34", "gpio35", "gpio36", "gpio37"; + drive-strength = <2>; + bias-disable; + }; +}; + +&qup_spi6_default { + pinconf { + pins = "gpio59", "gpio60", "gpio61", "gpio62"; + drive-strength = <2>; + bias-disable; + }; +}; + +&qup_spi10_default { + pinconf { + pins = "gpio86", "gpio87", "gpio88", "gpio89"; + drive-strength = <2>; + bias-disable; + }; +}; + diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi new file mode 100644 index 000000000000..8011c5fe2a31 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi @@ -0,0 +1,2187 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * SC7180 SoC device tree source + * + * Copyright (c) 2019, The Linux Foundation. All rights reserved. + */ + +#include <dt-bindings/clock/qcom,gcc-sc7180.h> +#include <dt-bindings/clock/qcom,rpmh.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/phy/phy-qcom-qusb2.h> +#include <dt-bindings/power/qcom-aoss-qmp.h> +#include <dt-bindings/power/qcom-rpmpd.h> +#include <dt-bindings/reset/qcom,sdm845-aoss.h> +#include <dt-bindings/reset/qcom,sdm845-pdc.h> +#include <dt-bindings/soc/qcom,rpmh-rsc.h> +#include <dt-bindings/thermal/thermal.h> + +/ { + interrupt-parent = <&intc>; + + #address-cells = <2>; + #size-cells = <2>; + + chosen { }; + + aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; + i2c5 = &i2c5; + i2c6 = &i2c6; + i2c7 = &i2c7; + i2c8 = &i2c8; + i2c9 = &i2c9; + i2c10 = &i2c10; + i2c11 = &i2c11; + spi0 = &spi0; + spi1 = &spi1; + spi3 = &spi3; + spi5 = &spi5; + spi6 = &spi6; + spi8 = &spi8; + spi10 = &spi10; + spi11 = &spi11; + }; + + clocks { + xo_board: xo-board { + compatible = "fixed-clock"; + clock-frequency = <38400000>; + #clock-cells = <0>; + }; + + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + clock-frequency = <32764>; + #clock-cells = <0>; + }; + }; + + reserved_memory: reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + aop_cmd_db_mem: memory@80820000 { + reg = <0x0 0x80820000 0x0 0x20000>; + compatible = "qcom,cmd-db"; + }; + + smem_mem: memory@80900000 { + reg = <0x0 0x80900000 0x0 0x200000>; + no-map; + }; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "arm,armv8"; + reg = <0x0 0x0>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + #cooling-cells = <2>; + qcom,freq-domain = <&cpufreq_hw 0>; + L2_0: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + L3_0: l3-cache { + compatible = "cache"; + }; + }; + }; + + CPU1: cpu@100 { + device_type = "cpu"; + compatible = "arm,armv8"; + reg = <0x0 0x100>; + enable-method = "psci"; + next-level-cache = <&L2_100>; + #cooling-cells = <2>; + qcom,freq-domain = <&cpufreq_hw 0>; + L2_100: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU2: cpu@200 { + device_type = "cpu"; + compatible = "arm,armv8"; + reg = <0x0 0x200>; + enable-method = "psci"; + next-level-cache = <&L2_200>; + #cooling-cells = <2>; + qcom,freq-domain = <&cpufreq_hw 0>; + L2_200: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU3: cpu@300 { + device_type = "cpu"; + compatible = "arm,armv8"; + reg = <0x0 0x300>; + enable-method = "psci"; + next-level-cache = <&L2_300>; + #cooling-cells = <2>; + qcom,freq-domain = <&cpufreq_hw 0>; + L2_300: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU4: cpu@400 { + device_type = "cpu"; + compatible = "arm,armv8"; + reg = <0x0 0x400>; + enable-method = "psci"; + next-level-cache = <&L2_400>; + #cooling-cells = <2>; + qcom,freq-domain = <&cpufreq_hw 0>; + L2_400: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU5: cpu@500 { + device_type = "cpu"; + compatible = "arm,armv8"; + reg = <0x0 0x500>; + enable-method = "psci"; + next-level-cache = <&L2_500>; + #cooling-cells = <2>; + qcom,freq-domain = <&cpufreq_hw 0>; + L2_500: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU6: cpu@600 { + device_type = "cpu"; + compatible = "arm,armv8"; + reg = <0x0 0x600>; + enable-method = "psci"; + next-level-cache = <&L2_600>; + #cooling-cells = <2>; + qcom,freq-domain = <&cpufreq_hw 1>; + L2_600: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU7: cpu@700 { + device_type = "cpu"; + compatible = "arm,armv8"; + reg = <0x0 0x700>; + enable-method = "psci"; + next-level-cache = <&L2_700>; + #cooling-cells = <2>; + qcom,freq-domain = <&cpufreq_hw 1>; + L2_700: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + }; + + memory@80000000 { + device_type = "memory"; + /* We expect the bootloader to fill in the size */ + reg = <0 0x80000000 0 0>; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <GIC_PPI 5 IRQ_TYPE_LEVEL_HIGH>; + }; + + firmware { + scm { + compatible = "qcom,scm-sc7180", "qcom,scm"; + }; + }; + + tcsr_mutex: hwlock { + compatible = "qcom,tcsr-mutex"; + syscon = <&tcsr_mutex_regs 0 0x1000>; + #hwlock-cells = <1>; + }; + + smem { + compatible = "qcom,smem"; + memory-region = <&smem_mem>; + hwlocks = <&tcsr_mutex 3>; + }; + + smp2p-cdsp { + compatible = "qcom,smp2p"; + qcom,smem = <94>, <432>; + + interrupts = <GIC_SPI 576 IRQ_TYPE_EDGE_RISING>; + + mboxes = <&apss_shared 6>; + + qcom,local-pid = <0>; + qcom,remote-pid = <5>; + + cdsp_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + cdsp_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-lpass { + compatible = "qcom,smp2p"; + qcom,smem = <443>, <429>; + + interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>; + + mboxes = <&apss_shared 10>; + + qcom,local-pid = <0>; + qcom,remote-pid = <2>; + + adsp_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + adsp_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-mpss { + compatible = "qcom,smp2p"; + qcom,smem = <435>, <428>; + interrupts = <GIC_SPI 451 IRQ_TYPE_EDGE_RISING>; + mboxes = <&apss_shared 14>; + qcom,local-pid = <0>; + qcom,remote-pid = <1>; + + modem_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + modem_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + soc: soc { + #address-cells = <2>; + #size-cells = <2>; + ranges = <0 0 0 0 0x10 0>; + dma-ranges = <0 0 0 0 0x10 0>; + compatible = "simple-bus"; + + gcc: clock-controller@100000 { + compatible = "qcom,gcc-sc7180"; + reg = <0 0x00100000 0 0x1f0000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&rpmhcc RPMH_CXO_CLK_A>; + clock-names = "bi_tcxo", "bi_tcxo_ao"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + qfprom@784000 { + compatible = "qcom,qfprom"; + reg = <0 0x00784000 0 0x8ff>; + #address-cells = <1>; + #size-cells = <1>; + + qusb2p_hstx_trim: hstx-trim-primary@25b { + reg = <0x25b 0x1>; + bits = <1 3>; + }; + }; + + qupv3_id_0: geniqup@8c0000 { + compatible = "qcom,geni-se-qup"; + reg = <0 0x008c0000 0 0x6000>; + clock-names = "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "disabled"; + + i2c0: i2c@880000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00880000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c0_default>; + interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi0: spi@880000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00880000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi0_default>; + interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart0: serial@880000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00880000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart0_default>; + interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + i2c1: i2c@884000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00884000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c1_default>; + interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi1: spi@884000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00884000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi1_default>; + interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart1: serial@884000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00884000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart1_default>; + interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + i2c2: i2c@888000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00888000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c2_default>; + interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart2: serial@888000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00888000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart2_default>; + interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + i2c3: i2c@88c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x0088c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c3_default>; + interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi3: spi@88c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x0088c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi3_default>; + interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart3: serial@88c000 { + compatible = "qcom,geni-uart"; + reg = <0 0x0088c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart3_default>; + interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + i2c4: i2c@890000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00890000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c4_default>; + interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart4: serial@890000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00890000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart4_default>; + interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + i2c5: i2c@894000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00894000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c5_default>; + interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi5: spi@894000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00894000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi5_default>; + interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart5: serial@894000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00894000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart5_default>; + interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + }; + + qupv3_id_1: geniqup@ac0000 { + compatible = "qcom,geni-se-qup"; + reg = <0 0x00ac0000 0 0x6000>; + clock-names = "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "disabled"; + + i2c6: i2c@a80000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a80000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c6_default>; + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi6: spi@a80000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a80000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi6_default>; + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart6: serial@a80000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00a80000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart6_default>; + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + i2c7: i2c@a84000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a84000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c7_default>; + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart7: serial@a84000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00a84000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart7_default>; + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + i2c8: i2c@a88000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a88000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c8_default>; + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi8: spi@a88000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a88000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi8_default>; + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart8: serial@a88000 { + compatible = "qcom,geni-debug-uart"; + reg = <0 0x00a88000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart8_default>; + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + i2c9: i2c@a8c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a8c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c9_default>; + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart9: serial@a8c000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00a8c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart9_default>; + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + i2c10: i2c@a90000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a90000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c10_default>; + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi10: spi@a90000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a90000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi10_default>; + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart10: serial@a90000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00a90000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart10_default>; + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + i2c11: i2c@a94000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a94000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c11_default>; + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi11: spi@a94000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a94000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi11_default>; + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart11: serial@a94000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00a94000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart11_default>; + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + }; + + tcsr_mutex_regs: syscon@1f40000 { + compatible = "syscon"; + reg = <0 0x01f40000 0 0x40000>; + }; + + tlmm: pinctrl@3500000 { + compatible = "qcom,sc7180-pinctrl"; + reg = <0 0x03500000 0 0x300000>, + <0 0x03900000 0 0x300000>, + <0 0x03d00000 0 0x300000>; + reg-names = "west", "north", "south"; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&tlmm 0 0 120>; + wakeup-parent = <&pdc>; + + qspi_clk: qspi-clk { + pinmux { + pins = "gpio63"; + function = "qspi_clk"; + }; + }; + + qspi_cs0: qspi-cs0 { + pinmux { + pins = "gpio68"; + function = "qspi_cs"; + }; + }; + + qspi_cs1: qspi-cs1 { + pinmux { + pins = "gpio72"; + function = "qspi_cs"; + }; + }; + + qspi_data01: qspi-data01 { + pinmux-data { + pins = "gpio64", "gpio65"; + function = "qspi_data"; + }; + }; + + qspi_data12: qspi-data12 { + pinmux-data { + pins = "gpio66", "gpio67"; + function = "qspi_data"; + }; + }; + + qup_i2c0_default: qup-i2c0-default { + pinmux { + pins = "gpio34", "gpio35"; + function = "qup00"; + }; + }; + + qup_i2c1_default: qup-i2c1-default { + pinmux { + pins = "gpio0", "gpio1"; + function = "qup01"; + }; + }; + + qup_i2c2_default: qup-i2c2-default { + pinmux { + pins = "gpio15", "gpio16"; + function = "qup02_i2c"; + }; + }; + + qup_i2c3_default: qup-i2c3-default { + pinmux { + pins = "gpio38", "gpio39"; + function = "qup03"; + }; + }; + + qup_i2c4_default: qup-i2c4-default { + pinmux { + pins = "gpio115", "gpio116"; + function = "qup04_i2c"; + }; + }; + + qup_i2c5_default: qup-i2c5-default { + pinmux { + pins = "gpio25", "gpio26"; + function = "qup05"; + }; + }; + + qup_i2c6_default: qup-i2c6-default { + pinmux { + pins = "gpio59", "gpio60"; + function = "qup10"; + }; + }; + + qup_i2c7_default: qup-i2c7-default { + pinmux { + pins = "gpio6", "gpio7"; + function = "qup11_i2c"; + }; + }; + + qup_i2c8_default: qup-i2c8-default { + pinmux { + pins = "gpio42", "gpio43"; + function = "qup12"; + }; + }; + + qup_i2c9_default: qup-i2c9-default { + pinmux { + pins = "gpio46", "gpio47"; + function = "qup13_i2c"; + }; + }; + + qup_i2c10_default: qup-i2c10-default { + pinmux { + pins = "gpio86", "gpio87"; + function = "qup14"; + }; + }; + + qup_i2c11_default: qup-i2c11-default { + pinmux { + pins = "gpio53", "gpio54"; + function = "qup15"; + }; + }; + + qup_spi0_default: qup-spi0-default { + pinmux { + pins = "gpio34", "gpio35", + "gpio36", "gpio37"; + function = "qup00"; + }; + }; + + qup_spi1_default: qup-spi1-default { + pinmux { + pins = "gpio0", "gpio1", + "gpio2", "gpio3"; + function = "qup01"; + }; + }; + + qup_spi3_default: qup-spi3-default { + pinmux { + pins = "gpio38", "gpio39", + "gpio40", "gpio41"; + function = "qup03"; + }; + }; + + qup_spi5_default: qup-spi5-default { + pinmux { + pins = "gpio25", "gpio26", + "gpio27", "gpio28"; + function = "qup05"; + }; + }; + + qup_spi6_default: qup-spi6-default { + pinmux { + pins = "gpio59", "gpio60", + "gpio61", "gpio62"; + function = "qup10"; + }; + }; + + qup_spi8_default: qup-spi8-default { + pinmux { + pins = "gpio42", "gpio43", + "gpio44", "gpio45"; + function = "qup12"; + }; + }; + + qup_spi10_default: qup-spi10-default { + pinmux { + pins = "gpio86", "gpio87", + "gpio88", "gpio89"; + function = "qup14"; + }; + }; + + qup_spi11_default: qup-spi11-default { + pinmux { + pins = "gpio53", "gpio54", + "gpio55", "gpio56"; + function = "qup15"; + }; + }; + + qup_uart0_default: qup-uart0-default { + pinmux { + pins = "gpio34", "gpio35", + "gpio36", "gpio37"; + function = "qup00"; + }; + }; + + qup_uart1_default: qup-uart1-default { + pinmux { + pins = "gpio0", "gpio1", + "gpio2", "gpio3"; + function = "qup01"; + }; + }; + + qup_uart2_default: qup-uart2-default { + pinmux { + pins = "gpio15", "gpio16"; + function = "qup02_uart"; + }; + }; + + qup_uart3_default: qup-uart3-default { + pinmux { + pins = "gpio38", "gpio39", + "gpio40", "gpio41"; + function = "qup03"; + }; + }; + + qup_uart4_default: qup-uart4-default { + pinmux { + pins = "gpio115", "gpio116"; + function = "qup04_uart"; + }; + }; + + qup_uart5_default: qup-uart5-default { + pinmux { + pins = "gpio25", "gpio26", + "gpio27", "gpio28"; + function = "qup05"; + }; + }; + + qup_uart6_default: qup-uart6-default { + pinmux { + pins = "gpio59", "gpio60", + "gpio61", "gpio62"; + function = "qup10"; + }; + }; + + qup_uart7_default: qup-uart7-default { + pinmux { + pins = "gpio6", "gpio7"; + function = "qup11_uart"; + }; + }; + + qup_uart8_default: qup-uart8-default { + pinmux { + pins = "gpio44", "gpio45"; + function = "qup12"; + }; + }; + + qup_uart9_default: qup-uart9-default { + pinmux { + pins = "gpio46", "gpio47"; + function = "qup13_uart"; + }; + }; + + qup_uart10_default: qup-uart10-default { + pinmux { + pins = "gpio86", "gpio87", + "gpio88", "gpio89"; + function = "qup14"; + }; + }; + + qup_uart11_default: qup-uart11-default { + pinmux { + pins = "gpio53", "gpio54", + "gpio55", "gpio56"; + function = "qup15"; + }; + }; + }; + + qspi: spi@88dc000 { + compatible = "qcom,qspi-v1"; + reg = <0 0x088dc000 0 0x600>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QSPI_CNOC_PERIPH_AHB_CLK>, + <&gcc GCC_QSPI_CORE_CLK>; + clock-names = "iface", "core"; + status = "disabled"; + }; + + usb_1_hsphy: phy@88e3000 { + compatible = "qcom,sc7180-qusb2-phy"; + reg = <0 0x088e3000 0 0x400>; + status = "disabled"; + #phy-cells = <0>; + clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "cfg_ahb", "ref"; + resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; + + nvmem-cells = <&qusb2p_hstx_trim>; + }; + + usb_1_qmpphy: phy-wrapper@88e9000 { + compatible = "qcom,sc7180-qmp-usb3-phy"; + reg = <0 0x088e9000 0 0x18c>, + <0 0x088e8000 0 0x38>; + reg-names = "reg-base", "dp_com"; + status = "disabled"; + #clock-cells = <1>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, + <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, + <&gcc GCC_USB3_PRIM_CLKREF_CLK>, + <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>; + clock-names = "aux", "cfg_ahb", "ref", "com_aux"; + + resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>, + <&gcc GCC_USB3_PHY_PRIM_BCR>; + reset-names = "phy", "common"; + + usb_1_ssphy: phy@88e9200 { + reg = <0 0x088e9200 0 0x128>, + <0 0x088e9400 0 0x200>, + <0 0x088e9c00 0 0x218>, + <0 0x088e9600 0 0x128>, + <0 0x088e9800 0 0x200>, + <0 0x088e9a00 0 0x18>; + #clock-cells = <0>; + #phy-cells = <0>; + clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; + clock-names = "pipe0"; + clock-output-names = "usb3_phy_pipe_clk_src"; + }; + }; + + system-cache-controller@9200000 { + compatible = "qcom,sc7180-llcc"; + reg = <0 0x09200000 0 0x200000>, <0 0x09600000 0 0x50000>; + reg-names = "llcc_base", "llcc_broadcast_base"; + interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>; + }; + + usb_1: usb@a6f8800 { + compatible = "qcom,sc7180-dwc3", "qcom,dwc3"; + reg = <0 0x0a6f8800 0 0x400>; + status = "disabled"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + dma-ranges; + + clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>, + <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_PRIM_SLEEP_CLK>; + clock-names = "cfg_noc", "core", "iface", "mock_utmi", + "sleep"; + + assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>; + assigned-clock-rates = <19200000>, <150000000>; + + interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 488 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 489 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hs_phy_irq", "ss_phy_irq", + "dm_hs_phy_irq", "dp_hs_phy_irq"; + + power-domains = <&gcc USB30_PRIM_GDSC>; + + resets = <&gcc GCC_USB30_PRIM_BCR>; + + usb_1_dwc3: dwc3@a600000 { + compatible = "snps,dwc3"; + reg = <0 0x0a600000 0 0xe000>; + interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&apps_smmu 0x540 0>; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + phys = <&usb_1_hsphy>, <&usb_1_ssphy>; + phy-names = "usb2-phy", "usb3-phy"; + }; + }; + + pdc: interrupt-controller@b220000 { + compatible = "qcom,sc7180-pdc", "qcom,pdc"; + reg = <0 0x0b220000 0 0x30000>; + qcom,pdc-ranges = <0 480 15>, <17 497 98>, + <119 634 4>, <124 639 1>; + #interrupt-cells = <2>; + interrupt-parent = <&intc>; + interrupt-controller; + }; + + pdc_reset: reset-controller@b2e0000 { + compatible = "qcom,sc7180-pdc-global", "qcom,sdm845-pdc-global"; + reg = <0 0x0b2e0000 0 0x20000>; + #reset-cells = <1>; + }; + + tsens0: thermal-sensor@c263000 { + compatible = "qcom,sc7180-tsens","qcom,tsens-v2"; + reg = <0 0x0c263000 0 0x1ff>, /* TM */ + <0 0x0c222000 0 0x1ff>; /* SROT */ + #qcom,sensors = <15>; + interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow","critical"; + #thermal-sensor-cells = <1>; + }; + + tsens1: thermal-sensor@c265000 { + compatible = "qcom,sc7180-tsens","qcom,tsens-v2"; + reg = <0 0x0c265000 0 0x1ff>, /* TM */ + <0 0x0c223000 0 0x1ff>; /* SROT */ + #qcom,sensors = <10>; + interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow","critical"; + #thermal-sensor-cells = <1>; + }; + + aoss_reset: reset-controller@c2a0000 { + compatible = "qcom,sc7180-aoss-cc", "qcom,sdm845-aoss-cc"; + reg = <0 0x0c2a0000 0 0x31000>; + #reset-cells = <1>; + }; + + aoss_qmp: qmp@c300000 { + compatible = "qcom,sc7180-aoss-qmp"; + reg = <0 0x0c300000 0 0x100000>; + interrupts = <GIC_SPI 389 IRQ_TYPE_EDGE_RISING>; + mboxes = <&apss_shared 0>; + + #clock-cells = <0>; + #power-domain-cells = <1>; + }; + + spmi_bus: spmi@c440000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0 0x0c440000 0 0x1100>, + <0 0x0c600000 0 0x2000000>, + <0 0x0e600000 0 0x100000>, + <0 0x0e700000 0 0xa0000>, + <0 0x0c40a000 0 0x26000>; + reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; + interrupt-names = "periph_irq"; + interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>; + qcom,ee = <0>; + qcom,channel = <0>; + #address-cells = <1>; + #size-cells = <1>; + interrupt-controller; + #interrupt-cells = <4>; + cell-index = <0>; + }; + + apps_smmu: iommu@15000000 { + compatible = "qcom,sc7180-smmu-500", "arm,mmu-500"; + reg = <0 0x15000000 0 0x100000>; + #iommu-cells = <2>; + #global-interrupts = <1>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 410 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 411 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>; + }; + + intc: interrupt-controller@17a00000 { + compatible = "arm,gic-v3"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0 0x17a00000 0 0x10000>, /* GICD */ + <0 0x17a60000 0 0x100000>; /* GICR * 8 */ + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + + msi-controller@17a40000 { + compatible = "arm,gic-v3-its"; + msi-controller; + #msi-cells = <1>; + reg = <0 0x17a40000 0 0x20000>; + status = "disabled"; + }; + }; + + apss_shared: mailbox@17c00000 { + compatible = "qcom,sc7180-apss-shared"; + reg = <0 0x17c00000 0 0x10000>; + #mbox-cells = <1>; + }; + + watchdog@17c10000 { + compatible = "qcom,apss-wdt-sc7180", "qcom,kpss-wdt"; + reg = <0 0x17c10000 0 0x1000>; + clocks = <&sleep_clk>; + }; + + timer@17c20000{ + #address-cells = <2>; + #size-cells = <2>; + ranges; + compatible = "arm,armv7-timer-mem"; + reg = <0 0x17c20000 0 0x1000>; + + frame@17c21000 { + frame-number = <0>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + reg = <0 0x17c21000 0 0x1000>, + <0 0x17c22000 0 0x1000>; + }; + + frame@17c23000 { + frame-number = <1>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + reg = <0 0x17c23000 0 0x1000>; + status = "disabled"; + }; + + frame@17c25000 { + frame-number = <2>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + reg = <0 0x17c25000 0 0x1000>; + status = "disabled"; + }; + + frame@17c27000 { + frame-number = <3>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + reg = <0 0x17c27000 0 0x1000>; + status = "disabled"; + }; + + frame@17c29000 { + frame-number = <4>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + reg = <0 0x17c29000 0 0x1000>; + status = "disabled"; + }; + + frame@17c2b000 { + frame-number = <5>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + reg = <0 0x17c2b000 0 0x1000>; + status = "disabled"; + }; + + frame@17c2d000 { + frame-number = <6>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + reg = <0 0x17c2d000 0 0x1000>; + status = "disabled"; + }; + }; + + apps_rsc: rsc@18200000 { + compatible = "qcom,rpmh-rsc"; + reg = <0 0x18200000 0 0x10000>, + <0 0x18210000 0 0x10000>, + <0 0x18220000 0 0x10000>; + reg-names = "drv-0", "drv-1", "drv-2"; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + qcom,tcs-offset = <0xd00>; + qcom,drv-id = <2>; + qcom,tcs-config = <ACTIVE_TCS 2>, + <SLEEP_TCS 3>, + <WAKE_TCS 3>, + <CONTROL_TCS 1>; + + rpmhcc: clock-controller { + compatible = "qcom,sc7180-rpmh-clk"; + clocks = <&xo_board>; + clock-names = "xo"; + #clock-cells = <1>; + }; + + rpmhpd: power-controller { + compatible = "qcom,sc7180-rpmhpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmhpd_opp_table>; + + rpmhpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmhpd_opp_ret: opp1 { + opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>; + }; + + rpmhpd_opp_min_svs: opp2 { + opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>; + }; + + rpmhpd_opp_low_svs: opp3 { + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; + }; + + rpmhpd_opp_svs: opp4 { + opp-level = <RPMH_REGULATOR_LEVEL_SVS>; + }; + + rpmhpd_opp_svs_l1: opp5 { + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; + }; + + rpmhpd_opp_svs_l2: opp6 { + opp-level = <224>; + }; + + rpmhpd_opp_nom: opp7 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM>; + }; + + rpmhpd_opp_nom_l1: opp8 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>; + }; + + rpmhpd_opp_nom_l2: opp9 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>; + }; + + rpmhpd_opp_turbo: opp10 { + opp-level = <RPMH_REGULATOR_LEVEL_TURBO>; + }; + + rpmhpd_opp_turbo_l1: opp11 { + opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>; + }; + }; + }; + }; + + cpufreq_hw: cpufreq@18323000 { + compatible = "qcom,cpufreq-hw"; + reg = <0 0x18323000 0 0x1400>, <0 0x18325800 0 0x1400>; + reg-names = "freq-domain0", "freq-domain1"; + + clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>; + clock-names = "xo", "alternate"; + + #freq-domain-cells = <1>; + }; + }; + + thermal-zones { + cpu0-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 1>; + + trips { + cpu0_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu0_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu0_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu0_alert0>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu0_alert1>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu1-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 2>; + + trips { + cpu1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu1_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu1_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu1_alert0>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu1_alert1>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu2-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 3>; + + trips { + cpu2_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu2_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu2_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu2_alert0>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu2_alert1>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu3-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 4>; + + trips { + cpu3_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu3_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu3_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu3_alert0>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu3_alert1>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu4-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 5>; + + trips { + cpu4_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu4_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu4_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu4_alert0>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu4_alert1>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu5-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 6>; + + trips { + cpu5_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu5_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu5_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu5_alert0>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu5_alert1>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu6-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 9>; + + trips { + cpu6_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu6_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu6_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu6_alert0>; + cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu6_alert1>; + cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu7-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 10>; + + trips { + cpu7_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu7_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu7_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu7_alert0>; + cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu7_alert1>; + cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu8-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 11>; + + trips { + cpu8_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu8_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu8_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu8_alert0>; + cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu8_alert1>; + cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu9-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 12>; + + trips { + cpu9_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu9_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu9_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu9_alert0>; + cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu9_alert1>; + cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + aoss0-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 0>; + + trips { + aoss0_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + cpuss0-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 7>; + + trips { + cpuss0_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + cpuss0_crit: cluster0_crit { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpuss1-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 8>; + + trips { + cpuss1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + cpuss1_crit: cluster0_crit { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + gpuss0-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 13>; + + trips { + gpuss0_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + gpuss1-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 14>; + + trips { + gpuss1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + aoss1-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 0>; + + trips { + aoss1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + cwlan-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 1>; + + trips { + cwlan_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + audio-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 2>; + + trips { + audio_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + ddr-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 3>; + + trips { + ddr_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + q6-hvx-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 4>; + + trips { + q6_hvx_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + camera-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 5>; + + trips { + camera_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + mdm-core-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 6>; + + trips { + mdm_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + mdm-dsp-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 7>; + + trips { + mdm_dsp_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + npu-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 8>; + + trips { + npu_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + video-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 9>; + + trips { + video_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 1 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 2 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 3 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 0 IRQ_TYPE_LEVEL_LOW>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi index 1ebbd568dfd7..7b53b3c7ffe6 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi @@ -165,6 +165,7 @@ /delete-node/ &venus_mem; /delete-node/ &cdsp_mem; /delete-node/ &cdsp_pas; +/delete-node/ &gpu_mem; /* Increase the size from 120 MB to 128 MB */ &mpss_region { @@ -649,6 +650,20 @@ ap_ts_i2c: &i2c14 { status = "okay"; }; +&spi5 { + status = "okay"; + + tpm@0 { + compatible = "google,cr50"; + reg = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&h1_ap_int_odl>; + spi-max-frequency = <800000>; + interrupt-parent = <&tlmm>; + interrupts = <129 IRQ_TYPE_EDGE_RISING>; + }; +}; + &spi10 { status = "okay"; @@ -701,9 +716,8 @@ ap_ts_i2c: &i2c14 { &ufs_mem_hc { status = "okay"; - pinctrl-names = "init", "default"; - pinctrl-0 = <&ufs_dev_reset_assert>; - pinctrl-1 = <&ufs_dev_reset_deassert>; + + reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>; vcc-supply = <&src_pp2950_l20a>; vcc-max-microamp = <600000>; @@ -745,7 +759,7 @@ ap_ts_i2c: &i2c14 { * All the hardware muxes would allow us to hook things up in different * ways to some potential benefit for static configurations (you could * achieve extra USB2 bandwidth by using two different ports for the - * two conenctors or possibly even get USB3 peripheral mode), but in + * two connectors or possibly even get USB3 peripheral mode), but in * each case you end up forcing to disconnect/reconnect an in-use * USB session in some cases depending on what you hotplug into the * other connector. Thus hardcoding this as peripheral makes sense. @@ -963,27 +977,27 @@ ap_ts_i2c: &i2c14 { }; &pm8998_adc { - adc-chan@ADC5_AMUX_THM1_100K_PU { + adc-chan@4d { reg = <ADC5_AMUX_THM1_100K_PU>; label = "sdm_temp"; }; - adc-chan@ADC5_AMUX_THM2_100K_PU { + adc-chan@4e { reg = <ADC5_AMUX_THM2_100K_PU>; label = "quiet_temp"; }; - adc-chan@ADC5_AMUX_THM3_100K_PU { + adc-chan@4f { reg = <ADC5_AMUX_THM3_100K_PU>; label = "lte_temp_1"; }; - adc-chan@ADC5_AMUX_THM4_100K_PU { + adc-chan@50 { reg = <ADC5_AMUX_THM4_100K_PU>; label = "lte_temp_2"; }; - adc-chan@ADC5_AMUX_THM5_100K_PU { + adc-chan@51 { reg = <ADC5_AMUX_THM5_100K_PU>; label = "charger_temp"; }; @@ -1258,52 +1272,6 @@ ap_ts_i2c: &i2c14 { }; }; - ufs_dev_reset_assert: ufs_dev_reset_assert { - config { - pins = "ufs_reset"; - bias-pull-down; /* default: pull down */ - /* - * UFS_RESET driver strengths are having - * different values/steps compared to typical - * GPIO drive strengths. - * - * Following table clarifies: - * - * HDRV value | UFS_RESET | Typical GPIO - * (dec) | (mA) | (mA) - * 0 | 0.8 | 2 - * 1 | 1.55 | 4 - * 2 | 2.35 | 6 - * 3 | 3.1 | 8 - * 4 | 3.9 | 10 - * 5 | 4.65 | 12 - * 6 | 5.4 | 14 - * 7 | 6.15 | 16 - * - * POR value for UFS_RESET HDRV is 3 which means - * 3.1mA and we want to use that. Hence just - * specify 8mA to "drive-strength" binding and - * that should result into writing 3 to HDRV - * field. - */ - drive-strength = <8>; /* default: 3.1 mA */ - output-low; /* active low reset */ - }; - }; - - ufs_dev_reset_deassert: ufs_dev_reset_deassert { - config { - pins = "ufs_reset"; - bias-pull-down; /* default: pull down */ - /* - * default: 3.1 mA - * check comments under ufs_dev_reset_assert - */ - drive-strength = <8>; - output-high; /* active low reset */ - }; - }; - ap_suspend_l_assert: ap_suspend_l_assert { config { pins = "gpio126"; diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts index 71bd717a4251..eb77aaa6a819 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts @@ -197,7 +197,7 @@ &adsp_pas { status = "okay"; - firmware-name = "qcom/db845c/adsp.mdt"; + firmware-name = "qcom/sdm845/adsp.mdt"; }; &apps_rsc { @@ -312,6 +312,18 @@ regulator-max-microvolt = <1200000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; + + vreg_lvs1a_1p8: lvs1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + vreg_lvs2a_1p8: lvs2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; }; pmi8998-rpmh-regulators { @@ -331,7 +343,7 @@ &cdsp_pas { status = "okay"; - firmware-name = "qcom/db845c/cdsp.mdt"; + firmware-name = "qcom/sdm845/cdsp.mdt"; }; &gcc { @@ -340,6 +352,18 @@ <GCC_QSPI_CNOC_PERIPH_AHB_CLK>; }; +&gpu { + zap-shader { + memory-region = <&gpu_mem>; + firmware-name = "qcom/sdm845/a630_zap.mbn"; + }; +}; + +&mss_pil { + status = "okay"; + firmware-name = "qcom/sdm845/mba.mbn", "qcom/sdm845/modem.mbn"; +}; + &pm8998_gpio { vol_up_pin_a: vol-up-active { pins = "gpio6"; @@ -497,6 +521,8 @@ &ufs_mem_hc { status = "okay"; + reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>; + vcc-supply = <&vreg_l20a_2p95>; vcc-max-microamp = <800000>; }; @@ -515,6 +541,8 @@ vdd-1.8-xo-supply = <&vreg_l7a_1p8>; vdd-1.3-rfa-supply = <&vreg_l17a_1p3>; vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; + + qcom,snoc-host-cap-8bit-quirk; }; /* PINCTRL - additions to nodes defined in sdm845.dtsi */ diff --git a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts index 2e78638eb73b..09ad37b0dd71 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts @@ -360,6 +360,13 @@ <GCC_LPASS_SWAY_CLK>; }; +&gpu { + zap-shader { + memory-region = <&gpu_mem>; + firmware-name = "qcom/sdm845/a630_zap.mbn"; + }; +}; + &i2c10 { status = "okay"; clock-frequency = <400000>; @@ -388,6 +395,8 @@ &ufs_mem_hc { status = "okay"; + reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>; + vcc-supply = <&vreg_l20a_2p95>; vcc-max-microamp = <600000>; }; diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index 4babff5f19b5..d42302b8889b 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -194,6 +194,7 @@ &LITTLE_CPU_SLEEP_1 &CLUSTER_SLEEP_0>; capacity-dmips-mhz = <607>; + dynamic-power-coefficient = <100>; qcom,freq-domain = <&cpufreq_hw 0>; #cooling-cells = <2>; next-level-cache = <&L2_0>; @@ -215,6 +216,7 @@ &LITTLE_CPU_SLEEP_1 &CLUSTER_SLEEP_0>; capacity-dmips-mhz = <607>; + dynamic-power-coefficient = <100>; qcom,freq-domain = <&cpufreq_hw 0>; #cooling-cells = <2>; next-level-cache = <&L2_100>; @@ -233,6 +235,7 @@ &LITTLE_CPU_SLEEP_1 &CLUSTER_SLEEP_0>; capacity-dmips-mhz = <607>; + dynamic-power-coefficient = <100>; qcom,freq-domain = <&cpufreq_hw 0>; #cooling-cells = <2>; next-level-cache = <&L2_200>; @@ -251,6 +254,7 @@ &LITTLE_CPU_SLEEP_1 &CLUSTER_SLEEP_0>; capacity-dmips-mhz = <607>; + dynamic-power-coefficient = <100>; qcom,freq-domain = <&cpufreq_hw 0>; #cooling-cells = <2>; next-level-cache = <&L2_300>; @@ -269,6 +273,7 @@ cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1 &CLUSTER_SLEEP_0>; + dynamic-power-coefficient = <396>; qcom,freq-domain = <&cpufreq_hw 1>; #cooling-cells = <2>; next-level-cache = <&L2_400>; @@ -287,6 +292,7 @@ cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1 &CLUSTER_SLEEP_0>; + dynamic-power-coefficient = <396>; qcom,freq-domain = <&cpufreq_hw 1>; #cooling-cells = <2>; next-level-cache = <&L2_500>; @@ -305,6 +311,7 @@ cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1 &CLUSTER_SLEEP_0>; + dynamic-power-coefficient = <396>; qcom,freq-domain = <&cpufreq_hw 1>; #cooling-cells = <2>; next-level-cache = <&L2_600>; @@ -323,6 +330,7 @@ cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1 &CLUSTER_SLEEP_0>; + dynamic-power-coefficient = <396>; qcom,freq-domain = <&cpufreq_hw 1>; #cooling-cells = <2>; next-level-cache = <&L2_700>; @@ -483,6 +491,25 @@ label = "lpass"; qcom,remote-pid = <2>; mboxes = <&apss_shared 8>; + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "adsp"; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + iommus = <&apps_smmu 0x1823 0x0>; + }; + + compute-cb@4 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <4>; + iommus = <&apps_smmu 0x1824 0x0>; + }; + }; }; }; @@ -512,6 +539,61 @@ label = "turing"; qcom,remote-pid = <5>; mboxes = <&apss_shared 4>; + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "cdsp"; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@1 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <1>; + iommus = <&apps_smmu 0x1401 0x30>; + }; + + compute-cb@2 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <2>; + iommus = <&apps_smmu 0x1402 0x30>; + }; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + iommus = <&apps_smmu 0x1403 0x30>; + }; + + compute-cb@4 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <4>; + iommus = <&apps_smmu 0x1404 0x30>; + }; + + compute-cb@5 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <5>; + iommus = <&apps_smmu 0x1405 0x30>; + }; + + compute-cb@6 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <6>; + iommus = <&apps_smmu 0x1406 0x30>; + }; + + compute-cb@7 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <7>; + iommus = <&apps_smmu 0x1407 0x30>; + }; + + compute-cb@8 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <8>; + iommus = <&apps_smmu 0x1408 0x30>; + }; + }; }; }; @@ -620,7 +702,7 @@ method = "smc"; }; - soc: soc { + soc: soc@0 { #address-cells = <2>; #size-cells = <2>; ranges = <0 0 0 0 0x10 0>; @@ -1275,6 +1357,13 @@ }; }; + system-cache-controller@1100000 { + compatible = "qcom,sdm845-llcc"; + reg = <0 0x01100000 0 0x200000>, <0 0x01300000 0 0x50000>; + reg-names = "llcc_base", "llcc_broadcast_base"; + interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>; + }; + ufs_mem_hc: ufshc@1d84000 { compatible = "qcom,sdm845-ufshc", "qcom,ufshc", "jedec,ufs-2.0"; @@ -1285,6 +1374,8 @@ lanes-per-direction = <2>; power-domains = <&gcc UFS_PHY_GDSC>; #reset-cells = <1>; + resets = <&gcc GCC_UFS_PHY_BCR>; + reset-names = "rst"; iommus = <&apps_smmu 0x100 0xf>; @@ -1358,6 +1449,7 @@ interrupt-controller; #interrupt-cells = <2>; gpio-ranges = <&tlmm 0 0 150>; + wakeup-parent = <&pdc_intc>; qspi_clk: qspi-clk { pinmux { @@ -1815,6 +1907,457 @@ clock-names = "xo"; }; + stm@6002000 { + compatible = "arm,coresight-stm", "arm,primecell"; + reg = <0 0x06002000 0 0x1000>, + <0 0x16280000 0 0x180000>; + reg-names = "stm-base", "stm-stimulus-base"; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + stm_out: endpoint { + remote-endpoint = + <&funnel0_in7>; + }; + }; + }; + }; + + funnel@6041000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0x06041000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + funnel0_out: endpoint { + remote-endpoint = + <&merge_funnel_in0>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@7 { + reg = <7>; + funnel0_in7: endpoint { + remote-endpoint = <&stm_out>; + }; + }; + }; + }; + + funnel@6043000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0x06043000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + funnel2_out: endpoint { + remote-endpoint = + <&merge_funnel_in2>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@5 { + reg = <5>; + funnel2_in5: endpoint { + remote-endpoint = + <&apss_merge_funnel_out>; + }; + }; + }; + }; + + funnel@6045000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0x06045000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + merge_funnel_out: endpoint { + remote-endpoint = <&etf_in>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + merge_funnel_in0: endpoint { + remote-endpoint = + <&funnel0_out>; + }; + }; + + port@2 { + reg = <2>; + merge_funnel_in2: endpoint { + remote-endpoint = + <&funnel2_out>; + }; + }; + }; + }; + + replicator@6046000 { + compatible = "arm,coresight-dynamic-replicator", "arm,primecell"; + reg = <0 0x06046000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + replicator_out: endpoint { + remote-endpoint = <&etr_in>; + }; + }; + }; + + in-ports { + port { + replicator_in: endpoint { + remote-endpoint = <&etf_out>; + }; + }; + }; + }; + + etf@6047000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0 0x06047000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + etf_out: endpoint { + remote-endpoint = + <&replicator_in>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + etf_in: endpoint { + remote-endpoint = + <&merge_funnel_out>; + }; + }; + }; + }; + + etr@6048000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0 0x06048000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + arm,scatter-gather; + + in-ports { + port { + etr_in: endpoint { + remote-endpoint = + <&replicator_out>; + }; + }; + }; + }; + + etm@7040000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x07040000 0 0x1000>; + + cpu = <&CPU0>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + etm0_out: endpoint { + remote-endpoint = + <&apss_funnel_in0>; + }; + }; + }; + }; + + etm@7140000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x07140000 0 0x1000>; + + cpu = <&CPU1>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + etm1_out: endpoint { + remote-endpoint = + <&apss_funnel_in1>; + }; + }; + }; + }; + + etm@7240000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x07240000 0 0x1000>; + + cpu = <&CPU2>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + etm2_out: endpoint { + remote-endpoint = + <&apss_funnel_in2>; + }; + }; + }; + }; + + etm@7340000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x07340000 0 0x1000>; + + cpu = <&CPU3>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + etm3_out: endpoint { + remote-endpoint = + <&apss_funnel_in3>; + }; + }; + }; + }; + + etm@7440000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x07440000 0 0x1000>; + + cpu = <&CPU4>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + etm4_out: endpoint { + remote-endpoint = + <&apss_funnel_in4>; + }; + }; + }; + }; + + etm@7540000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x07540000 0 0x1000>; + + cpu = <&CPU5>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + etm5_out: endpoint { + remote-endpoint = + <&apss_funnel_in5>; + }; + }; + }; + }; + + etm@7640000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x07640000 0 0x1000>; + + cpu = <&CPU6>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + etm6_out: endpoint { + remote-endpoint = + <&apss_funnel_in6>; + }; + }; + }; + }; + + etm@7740000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x07740000 0 0x1000>; + + cpu = <&CPU7>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + etm7_out: endpoint { + remote-endpoint = + <&apss_funnel_in7>; + }; + }; + }; + }; + + funnel@7800000 { /* APSS Funnel */ + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0x07800000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + apss_funnel_out: endpoint { + remote-endpoint = + <&apss_merge_funnel_in>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + apss_funnel_in0: endpoint { + remote-endpoint = + <&etm0_out>; + }; + }; + + port@1 { + reg = <1>; + apss_funnel_in1: endpoint { + remote-endpoint = + <&etm1_out>; + }; + }; + + port@2 { + reg = <2>; + apss_funnel_in2: endpoint { + remote-endpoint = + <&etm2_out>; + }; + }; + + port@3 { + reg = <3>; + apss_funnel_in3: endpoint { + remote-endpoint = + <&etm3_out>; + }; + }; + + port@4 { + reg = <4>; + apss_funnel_in4: endpoint { + remote-endpoint = + <&etm4_out>; + }; + }; + + port@5 { + reg = <5>; + apss_funnel_in5: endpoint { + remote-endpoint = + <&etm5_out>; + }; + }; + + port@6 { + reg = <6>; + apss_funnel_in6: endpoint { + remote-endpoint = + <&etm6_out>; + }; + }; + + port@7 { + reg = <7>; + apss_funnel_in7: endpoint { + remote-endpoint = + <&etm7_out>; + }; + }; + }; + }; + + funnel@7810000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0x07810000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + apss_merge_funnel_out: endpoint { + remote-endpoint = + <&funnel2_in5>; + }; + }; + }; + + in-ports { + port { + apss_merge_funnel_in: endpoint { + remote-endpoint = + <&apss_funnel_out>; + }; + }; + }; + }; + sdhc_2: sdhci@8804000 { compatible = "qcom,sdm845-sdhci", "qcom,sdhci-msm-v5"; reg = <0 0x08804000 0 0x1000>; @@ -2027,6 +2570,36 @@ }; }; + video-codec@aa00000 { + compatible = "qcom,sdm845-venus"; + reg = <0 0x0aa00000 0 0xff000>; + interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&videocc VENUS_GDSC>; + clocks = <&videocc VIDEO_CC_VENUS_CTL_CORE_CLK>, + <&videocc VIDEO_CC_VENUS_AHB_CLK>, + <&videocc VIDEO_CC_VENUS_CTL_AXI_CLK>; + clock-names = "core", "iface", "bus"; + iommus = <&apps_smmu 0x10a0 0x8>, + <&apps_smmu 0x10b0 0x0>; + memory-region = <&venus_mem>; + + video-core0 { + compatible = "venus-decoder"; + clocks = <&videocc VIDEO_CC_VCODEC0_CORE_CLK>, + <&videocc VIDEO_CC_VCODEC0_AXI_CLK>; + clock-names = "core", "bus"; + power-domains = <&videocc VCODEC0_GDSC>; + }; + + video-core1 { + compatible = "venus-encoder"; + clocks = <&videocc VIDEO_CC_VCODEC1_CORE_CLK>, + <&videocc VIDEO_CC_VCODEC1_AXI_CLK>; + clock-names = "core", "bus"; + power-domains = <&videocc VCODEC1_GDSC>; + }; + }; + videocc: clock-controller@ab00000 { compatible = "qcom,sdm845-videocc"; reg = <0 0x0ab00000 0 0x10000>; @@ -2131,9 +2704,6 @@ status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - ports { #address-cells = <1>; #size-cells = <0>; @@ -2198,9 +2768,6 @@ status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - ports { #address-cells = <1>; #size-cells = <0>; @@ -2240,7 +2807,7 @@ }; }; - gpu@5000000 { + gpu: gpu@5000000 { compatible = "qcom,adreno-630.2", "qcom,adreno"; #stream-id-cells = <16>; @@ -2260,10 +2827,6 @@ qcom,gmu = <&gmu>; - zap-shader { - memory-region = <&gpu_mem>; - }; - gpu_opp_table: opp-table { compatible = "operating-points-v2"; @@ -2375,6 +2938,15 @@ #power-domain-cells = <1>; }; + pdc_intc: interrupt-controller@b220000 { + compatible = "qcom,sdm845-pdc", "qcom,pdc"; + reg = <0 0x0b220000 0 0x30000>; + qcom,pdc-ranges = <0 480 94>, <94 609 15>, <115 630 7>; + #interrupt-cells = <2>; + interrupt-parent = <&intc>; + interrupt-controller; + }; + pdc_reset: reset-controller@b2e0000 { compatible = "qcom,sdm845-pdc-global"; reg = <0 0x0b2e0000 0 0x20000>; @@ -2386,6 +2958,9 @@ reg = <0 0x0c263000 0 0x1ff>, /* TM */ <0 0x0c222000 0 0x1ff>; /* SROT */ #qcom,sensors = <13>; + interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", "critical"; #thermal-sensor-cells = <1>; }; @@ -2394,6 +2969,9 @@ reg = <0 0x0c265000 0 0x1ff>, /* TM */ <0 0x0c223000 0 0x1ff>; /* SROT */ #qcom,sensors = <8>; + interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", "critical"; #thermal-sensor-cells = <1>; }; @@ -2411,6 +2989,14 @@ #clock-cells = <0>; #power-domain-cells = <1>; + + cx_cdev: cx { + #cooling-cells = <2>; + }; + + ebi_cdev: ebi { + #cooling-cells = <2>; + }; }; spmi_bus: spmi@c440000 { @@ -2512,6 +3098,12 @@ status = "disabled"; }; + watchdog@17980000 { + compatible = "qcom,apss-wdt-sdm845", "qcom,kpss-wdt"; + reg = <0 0x17980000 0 0x1000>; + clocks = <&sleep_clk>; + }; + apss_shared: mailbox@17990000 { compatible = "qcom,sdm845-apss-shared"; reg = <0 0x17990000 0 0x1000>; @@ -2538,6 +3130,8 @@ rpmhcc: clock-controller { compatible = "qcom,sdm845-rpmh-clk"; #clock-cells = <1>; + clock-names = "xo"; + clocks = <&xo_board>; }; rpmhpd: power-controller { @@ -2607,7 +3201,7 @@ <0 0x17a60000 0 0x100000>; /* GICR * 8 */ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; - gic-its@17a40000 { + msi-controller@17a40000 { compatible = "arm,gic-v3-its"; msi-controller; #msi-cells = <1>; @@ -2718,13 +3312,13 @@ thermal-sensors = <&tsens0 1>; trips { - cpu0_alert0: trip-point@0 { + cpu0_alert0: trip-point0 { temperature = <90000>; hysteresis = <2000>; type = "passive"; }; - cpu0_alert1: trip-point@1 { + cpu0_alert1: trip-point1 { temperature = <95000>; hysteresis = <2000>; type = "passive"; @@ -2762,13 +3356,13 @@ thermal-sensors = <&tsens0 2>; trips { - cpu1_alert0: trip-point@0 { + cpu1_alert0: trip-point0 { temperature = <90000>; hysteresis = <2000>; type = "passive"; }; - cpu1_alert1: trip-point@1 { + cpu1_alert1: trip-point1 { temperature = <95000>; hysteresis = <2000>; type = "passive"; @@ -2806,13 +3400,13 @@ thermal-sensors = <&tsens0 3>; trips { - cpu2_alert0: trip-point@0 { + cpu2_alert0: trip-point0 { temperature = <90000>; hysteresis = <2000>; type = "passive"; }; - cpu2_alert1: trip-point@1 { + cpu2_alert1: trip-point1 { temperature = <95000>; hysteresis = <2000>; type = "passive"; @@ -2850,13 +3444,13 @@ thermal-sensors = <&tsens0 4>; trips { - cpu3_alert0: trip-point@0 { + cpu3_alert0: trip-point0 { temperature = <90000>; hysteresis = <2000>; type = "passive"; }; - cpu3_alert1: trip-point@1 { + cpu3_alert1: trip-point1 { temperature = <95000>; hysteresis = <2000>; type = "passive"; @@ -2894,13 +3488,13 @@ thermal-sensors = <&tsens0 7>; trips { - cpu4_alert0: trip-point@0 { + cpu4_alert0: trip-point0 { temperature = <90000>; hysteresis = <2000>; type = "passive"; }; - cpu4_alert1: trip-point@1 { + cpu4_alert1: trip-point1 { temperature = <95000>; hysteresis = <2000>; type = "passive"; @@ -2938,13 +3532,13 @@ thermal-sensors = <&tsens0 8>; trips { - cpu5_alert0: trip-point@0 { + cpu5_alert0: trip-point0 { temperature = <90000>; hysteresis = <2000>; type = "passive"; }; - cpu5_alert1: trip-point@1 { + cpu5_alert1: trip-point1 { temperature = <95000>; hysteresis = <2000>; type = "passive"; @@ -2982,13 +3576,13 @@ thermal-sensors = <&tsens0 9>; trips { - cpu6_alert0: trip-point@0 { + cpu6_alert0: trip-point0 { temperature = <90000>; hysteresis = <2000>; type = "passive"; }; - cpu6_alert1: trip-point@1 { + cpu6_alert1: trip-point1 { temperature = <95000>; hysteresis = <2000>; type = "passive"; @@ -3026,13 +3620,13 @@ thermal-sensors = <&tsens0 10>; trips { - cpu7_alert0: trip-point@0 { + cpu7_alert0: trip-point0 { temperature = <90000>; hysteresis = <2000>; type = "passive"; }; - cpu7_alert1: trip-point@1 { + cpu7_alert1: trip-point1 { temperature = <95000>; hysteresis = <2000>; type = "passive"; @@ -3070,7 +3664,7 @@ thermal-sensors = <&tsens0 0>; trips { - aoss0_alert0: trip-point@0 { + aoss0_alert0: trip-point0 { temperature = <90000>; hysteresis = <2000>; type = "hot"; @@ -3085,7 +3679,7 @@ thermal-sensors = <&tsens0 5>; trips { - cluster0_alert0: trip-point@0 { + cluster0_alert0: trip-point0 { temperature = <90000>; hysteresis = <2000>; type = "hot"; @@ -3105,7 +3699,7 @@ thermal-sensors = <&tsens0 6>; trips { - cluster1_alert0: trip-point@0 { + cluster1_alert0: trip-point0 { temperature = <90000>; hysteresis = <2000>; type = "hot"; @@ -3125,7 +3719,7 @@ thermal-sensors = <&tsens0 11>; trips { - gpu1_alert0: trip-point@0 { + gpu1_alert0: trip-point0 { temperature = <90000>; hysteresis = <2000>; type = "hot"; @@ -3140,7 +3734,7 @@ thermal-sensors = <&tsens0 12>; trips { - gpu2_alert0: trip-point@0 { + gpu2_alert0: trip-point0 { temperature = <90000>; hysteresis = <2000>; type = "hot"; @@ -3155,7 +3749,7 @@ thermal-sensors = <&tsens1 0>; trips { - aoss1_alert0: trip-point@0 { + aoss1_alert0: trip-point0 { temperature = <90000>; hysteresis = <2000>; type = "hot"; @@ -3170,7 +3764,7 @@ thermal-sensors = <&tsens1 1>; trips { - q6_modem_alert0: trip-point@0 { + q6_modem_alert0: trip-point0 { temperature = <90000>; hysteresis = <2000>; type = "hot"; @@ -3185,7 +3779,7 @@ thermal-sensors = <&tsens1 2>; trips { - mem_alert0: trip-point@0 { + mem_alert0: trip-point0 { temperature = <90000>; hysteresis = <2000>; type = "hot"; @@ -3200,7 +3794,7 @@ thermal-sensors = <&tsens1 3>; trips { - wlan_alert0: trip-point@0 { + wlan_alert0: trip-point0 { temperature = <90000>; hysteresis = <2000>; type = "hot"; @@ -3215,7 +3809,7 @@ thermal-sensors = <&tsens1 4>; trips { - q6_hvx_alert0: trip-point@0 { + q6_hvx_alert0: trip-point0 { temperature = <90000>; hysteresis = <2000>; type = "hot"; @@ -3230,7 +3824,7 @@ thermal-sensors = <&tsens1 5>; trips { - camera_alert0: trip-point@0 { + camera_alert0: trip-point0 { temperature = <90000>; hysteresis = <2000>; type = "hot"; @@ -3245,7 +3839,7 @@ thermal-sensors = <&tsens1 6>; trips { - video_alert0: trip-point@0 { + video_alert0: trip-point0 { temperature = <90000>; hysteresis = <2000>; type = "hot"; @@ -3260,7 +3854,7 @@ thermal-sensors = <&tsens1 7>; trips { - modem_alert0: trip-point@0 { + modem_alert0: trip-point0 { temperature = <90000>; hysteresis = <2000>; type = "hot"; diff --git a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts new file mode 100644 index 000000000000..b255be3a4a0a --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts @@ -0,0 +1,467 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Lenovo Yoga C630 + * + * Copyright (c) 2019, Linaro Ltd. + */ + +/dts-v1/; + +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include "sdm845.dtsi" +#include "pm8998.dtsi" + +/ { + model = "Lenovo Yoga C630"; + compatible = "lenovo,yoga-c630", "qcom,sdm845"; + + aliases { + hsuart0 = &uart6; + }; +}; + +&adsp_pas { + firmware-name = "qcom/LENOVO/81JL/qcadsp850.mbn"; + status = "okay"; +}; + +&apps_rsc { + pm8998-rpmh-regulators { + compatible = "qcom,pm8998-rpmh-regulators"; + qcom,pmic-id = "a"; + + vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>; + vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>; + + vreg_s2a_1p125: smps2 { + }; + + vreg_s3a_1p35: smps3 { + regulator-min-microvolt = <1352000>; + regulator-max-microvolt = <1352000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s4a_1p8: smps4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s5a_2p04: smps5 { + regulator-min-microvolt = <2040000>; + regulator-max-microvolt = <2040000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s7a_1p025: smps7 { + }; + + vdd_qusb_hs0: + vdda_hp_pcie_core: + vdda_mipi_csi0_0p9: + vdda_mipi_csi1_0p9: + vdda_mipi_csi2_0p9: + vdda_mipi_dsi0_pll: + vdda_mipi_dsi1_pll: + vdda_qlink_lv: + vdda_qlink_lv_ck: + vdda_qrefs_0p875: + vdda_pcie_core: + vdda_pll_cc_ebi01: + vdda_pll_cc_ebi23: + vdda_sp_sensor: + vdda_ufs1_core: + vdda_ufs2_core: + vdda_usb1_ss_core: + vdda_usb2_ss_core: + vreg_l1a_0p875: ldo1 { + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vddpx_10: + vreg_l2a_1p2: ldo2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; + }; + + vreg_l3a_1p0: ldo3 { + }; + + vdd_wcss_cx: + vdd_wcss_mx: + vdda_wcss_pll: + vreg_l5a_0p8: ldo5 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vddpx_13: + vreg_l6a_1p8: ldo6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7a_1p8: ldo7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8a_1p2: ldo8 { + }; + + vreg_l9a_1p8: ldo9 { + }; + + vreg_l10a_1p8: ldo10 { + }; + + vreg_l11a_1p0: ldo11 { + }; + + vdd_qfprom: + vdd_qfprom_sp: + vdda_apc1_cs_1p8: + vdda_gfx_cs_1p8: + vdda_qrefs_1p8: + vdda_qusb_hs0_1p8: + vddpx_11: + vreg_l12a_1p8: ldo12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vddpx_2: + vreg_l13a_2p95: ldo13 { + }; + + vreg_l14a_1p88: ldo14 { + regulator-min-microvolt = <1880000>; + regulator-max-microvolt = <1880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; + }; + + vreg_l15a_1p8: ldo15 { + }; + + vreg_l16a_2p7: ldo16 { + }; + + vreg_l17a_1p3: ldo17 { + regulator-min-microvolt = <1304000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l18a_2p7: ldo18 { + }; + + vreg_l19a_3p0: ldo19 { + regulator-min-microvolt = <3100000>; + regulator-max-microvolt = <3108000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l20a_2p95: ldo20 { + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l21a_2p95: ldo21 { + }; + + vreg_l22a_2p85: ldo22 { + }; + + vreg_l23a_3p3: ldo23 { + }; + + vdda_qusb_hs0_3p1: + vreg_l24a_3p075: ldo24 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3083000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l25a_3p3: ldo25 { + regulator-min-microvolt = <3104000>; + regulator-max-microvolt = <3112000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vdda_hp_pcie_1p2: + vdda_hv_ebi0: + vdda_hv_ebi1: + vdda_hv_ebi2: + vdda_hv_ebi3: + vdda_mipi_csi_1p25: + vdda_mipi_dsi0_1p2: + vdda_mipi_dsi1_1p2: + vdda_pcie_1p2: + vdda_ufs1_1p2: + vdda_ufs2_1p2: + vdda_usb1_ss_1p2: + vdda_usb2_ss_1p2: + vreg_l26a_1p2: ldo26 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1208000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l28a_3p0: ldo28 { + }; + + vreg_lvs1a_1p8: lvs1 { + }; + + vreg_lvs2a_1p8: lvs2 { + }; + }; +}; + +&apps_smmu { + /* TODO: Figure out how to survive booting with this enabled */ + status = "disabled"; +}; + +&cdsp_pas { + firmware-name = "qcom/LENOVO/81JL/qccdsp850.mbn"; + status = "okay"; +}; + +&gcc { + protected-clocks = <GCC_QSPI_CORE_CLK>, + <GCC_QSPI_CORE_CLK_SRC>, + <GCC_QSPI_CNOC_PERIPH_AHB_CLK>; +}; + +&gpu { + zap-shader { + memory-region = <&gpu_mem>; + firmware-name = "qcom/LENOVO/81JL/qcdxkmsuc850.mbn"; + }; +}; + +&i2c1 { + status = "okay"; + clock-frequency = <400000>; +}; + +&i2c3 { + status = "okay"; + clock-frequency = <400000>; + + hid@15 { + compatible = "hid-over-i2c"; + reg = <0x15>; + hid-descr-addr = <0x1>; + + interrupts-extended = <&tlmm 37 IRQ_TYPE_EDGE_RISING>; + }; + + hid@2c { + compatible = "hid-over-i2c"; + reg = <0x2c>; + hid-descr-addr = <0x20>; + + interrupts-extended = <&tlmm 37 IRQ_TYPE_EDGE_RISING>; + + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_hid_active>; + }; +}; + +&i2c5 { + status = "okay"; + clock-frequency = <400000>; + + hid@10 { + compatible = "hid-over-i2c"; + reg = <0x10>; + hid-descr-addr = <0x1>; + + interrupts-extended = <&tlmm 125 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-names = "default"; + pinctrl-0 = <&i2c6_hid_active>; + }; +}; + +&i2c11 { + status = "okay"; + clock-frequency = <400000>; + + hid@5c { + compatible = "hid-over-i2c"; + reg = <0x5c>; + hid-descr-addr = <0x1>; + + interrupts-extended = <&tlmm 92 IRQ_TYPE_LEVEL_LOW>; + + pinctrl-names = "default"; + pinctrl-0 = <&i2c12_hid_active>; + }; +}; + +&mss_pil { + firmware-name = "qcom/LENOVO/81JL/qcdsp1v2850.mbn", "qcom/LENOVO/81JL/qcdsp2850.mbn"; +}; + +&qup_i2c12_default { + drive-strength = <2>; + bias-disable; +}; + +&qup_uart6_default { + pinmux { + pins = "gpio45", "gpio46", "gpio47", "gpio48"; + function = "qup6"; + }; + + cts { + pins = "gpio45"; + bias-pull-down; + }; + + rts-tx { + pins = "gpio46", "gpio47"; + drive-strength = <2>; + bias-disable; + }; + + rx { + pins = "gpio48"; + bias-pull-up; + }; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&tlmm { + gpio-reserved-ranges = <0 4>, <81 4>; + + i2c2_hid_active: i2c2-hid-active { + pins = <37>; + function = "gpio"; + + input-enable; + bias-pull-up; + drive-strength = <2>; + }; + + i2c6_hid_active: i2c6-hid-active { + pins = <125>; + function = "gpio"; + + input-enable; + bias-pull-up; + drive-strength = <2>; + }; + + i2c12_hid_active: i2c12-hid-active { + pins = <92>; + function = "gpio"; + + input-enable; + bias-pull-up; + drive-strength = <2>; + }; +}; + +&uart6 { + status = "okay"; + + bluetooth { + compatible = "qcom,wcn3990-bt"; + + vddio-supply = <&vreg_s4a_1p8>; + vddxo-supply = <&vreg_l7a_1p8>; + vddrf-supply = <&vreg_l17a_1p3>; + vddch0-supply = <&vreg_l25a_3p3>; + max-speed = <3200000>; + }; +}; + +&ufs_mem_hc { + status = "okay"; + + vcc-supply = <&vreg_l20a_2p95>; + vcc-max-microamp = <600000>; +}; + +&ufs_mem_phy { + status = "okay"; + + vdda-phy-supply = <&vdda_ufs1_core>; + vdda-pll-supply = <&vdda_ufs1_1p2>; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "host"; +}; + +&usb_1_hsphy { + status = "okay"; + + vdd-supply = <&vdda_usb1_ss_core>; + vdda-pll-supply = <&vdda_qusb_hs0_1p8>; + vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>; + + qcom,imp-res-offset-value = <8>; + qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>; + qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>; + qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>; +}; + +&usb_1_qmpphy { + status = "okay"; + + vdda-phy-supply = <&vdda_usb1_ss_1p2>; + vdda-pll-supply = <&vdda_usb1_ss_core>; +}; + +&usb_2 { + status = "okay"; +}; + +&usb_2_dwc3 { + dr_mode = "host"; +}; + +&usb_2_hsphy { + status = "okay"; + + vdd-supply = <&vdda_usb2_ss_core>; + vdda-pll-supply = <&vdda_qusb_hs0_1p8>; + vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>; + + qcom,imp-res-offset-value = <8>; + qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_22_8_MA>; +}; + +&usb_2_qmpphy { + status = "okay"; + + vdda-phy-supply = <&vdda_usb2_ss_1p2>; + vdda-pll-supply = <&vdda_usb2_ss_core>; +}; diff --git a/arch/arm64/boot/dts/qcom/sm8150-mtp.dts b/arch/arm64/boot/dts/qcom/sm8150-mtp.dts new file mode 100644 index 000000000000..8ab16611ebe8 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm8150-mtp.dts @@ -0,0 +1,410 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved. + * Copyright (c) 2019, Linaro Limited + */ + +/dts-v1/; + +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include <dt-bindings/gpio/gpio.h> +#include "sm8150.dtsi" +#include "pm8150.dtsi" +#include "pm8150b.dtsi" +#include "pm8150l.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. SM8150 MTP"; + compatible = "qcom,sm8150-mtp"; + + aliases { + serial0 = &uart2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + }; + + /* + * Apparently RPMh does not provide support for PM8150 S4 because it + * is always-on; model it as a fixed regulator. + */ + vreg_s4a_1p8: pm8150-s4 { + compatible = "regulator-fixed"; + regulator-name = "vreg_s4a_1p8"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-always-on; + regulator-boot-on; + + vin-supply = <&vph_pwr>; + }; +}; + +&apps_rsc { + pm8150-rpmh-regulators { + compatible = "qcom,pm8150-rpmh-regulators"; + qcom,pmic-id = "a"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + + vdd-l1-l8-l11-supply = <&vreg_s6a_0p9>; + vdd-l2-l10-supply = <&vreg_bob>; + vdd-l3-l4-l5-l18-supply = <&vreg_s6a_0p9>; + vdd-l6-l9-supply = <&vreg_s8c_1p3>; + vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p0>; + vdd-l13-l16-l17-supply = <&vreg_bob>; + + vreg_s5a_2p0: smps5 { + regulator-min-microvolt = <1904000>; + regulator-max-microvolt = <2000000>; + }; + + vreg_s6a_0p9: smps6 { + regulator-min-microvolt = <920000>; + regulator-max-microvolt = <1128000>; + }; + + vdda_wcss_pll: + vreg_l1a_0p75: ldo1 { + regulator-min-microvolt = <752000>; + regulator-max-microvolt = <752000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vdd_pdphy: + vdda_usb_hs_3p1: + vreg_l2a_3p1: ldo2 { + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3a_0p8: ldo3 { + regulator-min-microvolt = <480000>; + regulator-max-microvolt = <932000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vdd_usb_hs_core: + vdda_csi_0_0p9: + vdda_csi_1_0p9: + vdda_csi_2_0p9: + vdda_csi_3_0p9: + vdda_dsi_0_0p9: + vdda_dsi_1_0p9: + vdda_dsi_0_pll_0p9: + vdda_dsi_1_pll_0p9: + vdda_pcie_1ln_core: + vdda_pcie_2ln_core: + vdda_pll_hv_cc_ebi01: + vdda_pll_hv_cc_ebi23: + vdda_qrefs_0p875_5: + vdda_sp_sensor: + vdda_ufs_2ln_core_1: + vdda_ufs_2ln_core_2: + vdda_usb_ss_dp_core_1: + vdda_usb_ss_dp_core_2: + vdda_qlink_lv: + vdda_qlink_lv_ck: + vreg_l5a_0p875: ldo5 { + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6a_1p2: ldo6 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7a_1p8: ldo7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vddpx_10: + vreg_l9a_1p2: ldo9 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l10a_2p5: ldo10 { + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l11a_0p8: ldo11 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vdd_qfprom: + vdd_qfprom_sp: + vdda_apc_cs_1p8: + vdda_gfx_cs_1p8: + vdda_usb_hs_1p8: + vdda_qrefs_vref_1p8: + vddpx_10_a: + vreg_l12a_1p8: ldo12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l13a_2p7: ldo13 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2704000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l14a_1p8: ldo14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l15a_1p7: ldo15 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <1704000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l16a_2p7: ldo16 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l17a_3p0: ldo17 { + regulator-min-microvolt = <2856000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + pm8150l-rpmh-regulators { + compatible = "qcom,pm8150l-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + + vdd-l1-l8-supply = <&vreg_s4a_1p8>; + vdd-l2-l3-supply = <&vreg_s8c_1p3>; + vdd-l4-l5-l6-supply = <&vreg_bob>; + vdd-l7-l11-supply = <&vreg_bob>; + vdd-l9-l10-supply = <&vreg_bob>; + + vdd-bob-supply = <&vph_pwr>; + vdd-flash-supply = <&vreg_bob>; + vdd-rgb-supply = <&vreg_bob>; + + vreg_bob: bob { + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <4000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + regulator-allow-bypass; + }; + + vreg_s8c_1p3: smps8 { + regulator-min-microvolt = <1352000>; + regulator-max-microvolt = <1352000>; + }; + + vreg_l1c_1p8: ldo1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vdda_wcss_adcdac_1: + vdda_wcss_adcdac_22: + vreg_l2c_1p3: ldo2 { + regulator-min-microvolt = <1304000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vdda_hv_ebi0: + vdda_hv_ebi1: + vdda_hv_ebi2: + vdda_hv_ebi3: + vdda_hv_refgen0: + vdda_qlink_hv_ck: + vreg_l3c_1p2: ldo3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vddpx_5: + vreg_l4c_1p8: ldo4 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <2928000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vddpx_6: + vreg_l5c_1p8: ldo5 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <2928000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vddpx_2: + vreg_l6c_2p9: ldo6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7c_3p0: ldo7 { + regulator-min-microvolt = <2856000>; + regulator-max-microvolt = <3104000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8c_1p8: ldo8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9c_2p9: ldo9 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l10c_3p3: ldo10 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l11c_3p3: ldo11 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + pm8009-rpmh-regulators { + compatible = "qcom,pm8009-rpmh-regulators"; + qcom,pmic-id = "f"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vreg_bob>; + + vdd-l2-supply = <&vreg_s8c_1p3>; + vdd-l5-l6-supply = <&vreg_bob>; + + vreg_l2f_1p2: ldo2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5f_2p85: ldo5 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6f_2p85: ldo6 { + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-min-microvolt = <2856000>; + regulator-max-microvolt = <2856000>; + }; + }; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&pon { + pwrkey { + status = "okay"; + }; + + resin { + compatible = "qcom,pm8941-resin"; + interrupts = <0x0 0x8 0x1 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + linux,code = <KEY_VOLUMEDOWN>; + }; +}; + +&remoteproc_adsp { + status = "okay"; +}; + +&remoteproc_cdsp { + status = "okay"; +}; + +&remoteproc_slpi { + status = "okay"; +}; + +&tlmm { + gpio-reserved-ranges = <0 4>, <126 4>; +}; + +&uart2 { + status = "okay"; +}; + +&ufs_mem_hc { + status = "okay"; + + reset-gpios = <&tlmm 175 GPIO_ACTIVE_LOW>; + + vcc-supply = <&vreg_l10a_2p5>; + vcc-max-microamp = <750000>; + vccq-supply = <&vreg_l9a_1p2>; + vccq-max-microamp = <700000>; + vccq2-supply = <&vreg_s4a_1p8>; + vccq2-max-microamp = <750000>; +}; + +&ufs_mem_phy { + status = "okay"; + + vdda-phy-supply = <&vdda_ufs_2ln_core_1>; + vdda-max-microamp = <90200>; + vdda-pll-supply = <&vreg_l3c_1p2>; + vdda-pll-max-microamp = <19000>; +}; diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi new file mode 100644 index 000000000000..141c21dfa68c --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi @@ -0,0 +1,867 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved. + * Copyright (c) 2019, Linaro Limited + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/power/qcom-aoss-qmp.h> +#include <dt-bindings/power/qcom-rpmpd.h> +#include <dt-bindings/soc/qcom,rpmh-rsc.h> +#include <dt-bindings/clock/qcom,rpmh.h> +#include <dt-bindings/clock/qcom,gcc-sm8150.h> + +/ { + interrupt-parent = <&intc>; + + #address-cells = <2>; + #size-cells = <2>; + + chosen { }; + + clocks { + xo_board: xo-board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <38400000>; + clock-output-names = "xo_board"; + }; + + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32764>; + clock-output-names = "sleep_clk"; + }; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "qcom,kryo485"; + reg = <0x0 0x0>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + qcom,freq-domain = <&cpufreq_hw 0>; + L2_0: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + L3_0: l3-cache { + compatible = "cache"; + }; + }; + }; + + CPU1: cpu@100 { + device_type = "cpu"; + compatible = "qcom,kryo485"; + reg = <0x0 0x100>; + enable-method = "psci"; + next-level-cache = <&L2_100>; + qcom,freq-domain = <&cpufreq_hw 0>; + L2_100: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + + }; + + CPU2: cpu@200 { + device_type = "cpu"; + compatible = "qcom,kryo485"; + reg = <0x0 0x200>; + enable-method = "psci"; + next-level-cache = <&L2_200>; + qcom,freq-domain = <&cpufreq_hw 0>; + L2_200: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU3: cpu@300 { + device_type = "cpu"; + compatible = "qcom,kryo485"; + reg = <0x0 0x300>; + enable-method = "psci"; + next-level-cache = <&L2_300>; + qcom,freq-domain = <&cpufreq_hw 0>; + L2_300: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU4: cpu@400 { + device_type = "cpu"; + compatible = "qcom,kryo485"; + reg = <0x0 0x400>; + enable-method = "psci"; + next-level-cache = <&L2_400>; + qcom,freq-domain = <&cpufreq_hw 1>; + L2_400: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU5: cpu@500 { + device_type = "cpu"; + compatible = "qcom,kryo485"; + reg = <0x0 0x500>; + enable-method = "psci"; + next-level-cache = <&L2_500>; + qcom,freq-domain = <&cpufreq_hw 1>; + L2_500: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU6: cpu@600 { + device_type = "cpu"; + compatible = "qcom,kryo485"; + reg = <0x0 0x600>; + enable-method = "psci"; + next-level-cache = <&L2_600>; + qcom,freq-domain = <&cpufreq_hw 1>; + L2_600: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU7: cpu@700 { + device_type = "cpu"; + compatible = "qcom,kryo485"; + reg = <0x0 0x700>; + enable-method = "psci"; + next-level-cache = <&L2_700>; + qcom,freq-domain = <&cpufreq_hw 2>; + L2_700: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + }; + + firmware { + scm: scm { + compatible = "qcom,scm-sm8150", "qcom,scm"; + #reset-cells = <1>; + }; + }; + + tcsr_mutex: hwlock { + compatible = "qcom,tcsr-mutex"; + syscon = <&tcsr_mutex_regs 0 0x1000>; + #hwlock-cells = <1>; + }; + + memory@80000000 { + device_type = "memory"; + /* We expect the bootloader to fill in the size */ + reg = <0x0 0x80000000 0x0 0x0>; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <GIC_PPI 5 IRQ_TYPE_LEVEL_HIGH>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + hyp_mem: memory@85700000 { + reg = <0x0 0x85700000 0x0 0x600000>; + no-map; + }; + + xbl_mem: memory@85d00000 { + reg = <0x0 0x85d00000 0x0 0x140000>; + no-map; + }; + + aop_mem: memory@85f00000 { + reg = <0x0 0x85f00000 0x0 0x20000>; + no-map; + }; + + aop_cmd_db: memory@85f20000 { + compatible = "qcom,cmd-db"; + reg = <0x0 0x85f20000 0x0 0x20000>; + no-map; + }; + + smem_mem: memory@86000000 { + reg = <0x0 0x86000000 0x0 0x200000>; + no-map; + }; + + tz_mem: memory@86200000 { + reg = <0x0 0x86200000 0x0 0x3900000>; + no-map; + }; + + rmtfs_mem: memory@89b00000 { + compatible = "qcom,rmtfs-mem"; + reg = <0x0 0x89b00000 0x0 0x200000>; + no-map; + + qcom,client-id = <1>; + qcom,vmid = <15>; + }; + + camera_mem: memory@8b700000 { + reg = <0x0 0x8b700000 0x0 0x500000>; + no-map; + }; + + wlan_mem: memory@8bc00000 { + reg = <0x0 0x8bc00000 0x0 0x180000>; + no-map; + }; + + npu_mem: memory@8bd80000 { + reg = <0x0 0x8bd80000 0x0 0x80000>; + no-map; + }; + + adsp_mem: memory@8be00000 { + reg = <0x0 0x8be00000 0x0 0x1a00000>; + no-map; + }; + + mpss_mem: memory@8d800000 { + reg = <0x0 0x8d800000 0x0 0x9600000>; + no-map; + }; + + venus_mem: memory@96e00000 { + reg = <0x0 0x96e00000 0x0 0x500000>; + no-map; + }; + + slpi_mem: memory@97300000 { + reg = <0x0 0x97300000 0x0 0x1400000>; + no-map; + }; + + ipa_fw_mem: memory@98700000 { + reg = <0x0 0x98700000 0x0 0x10000>; + no-map; + }; + + ipa_gsi_mem: memory@98710000 { + reg = <0x0 0x98710000 0x0 0x5000>; + no-map; + }; + + gpu_mem: memory@98715000 { + reg = <0x0 0x98715000 0x0 0x2000>; + no-map; + }; + + spss_mem: memory@98800000 { + reg = <0x0 0x98800000 0x0 0x100000>; + no-map; + }; + + cdsp_mem: memory@98900000 { + reg = <0x0 0x98900000 0x0 0x1400000>; + no-map; + }; + + qseecom_mem: memory@9e400000 { + reg = <0x0 0x9e400000 0x0 0x1400000>; + no-map; + }; + }; + + smem { + compatible = "qcom,smem"; + memory-region = <&smem_mem>; + hwlocks = <&tcsr_mutex 3>; + }; + + smp2p-cdsp { + compatible = "qcom,smp2p"; + qcom,smem = <94>, <432>; + + interrupts = <GIC_SPI 576 IRQ_TYPE_EDGE_RISING>; + + mboxes = <&apss_shared 6>; + + qcom,local-pid = <0>; + qcom,remote-pid = <5>; + + cdsp_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + cdsp_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-lpass { + compatible = "qcom,smp2p"; + qcom,smem = <443>, <429>; + + interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>; + + mboxes = <&apss_shared 10>; + + qcom,local-pid = <0>; + qcom,remote-pid = <2>; + + adsp_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + adsp_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-mpss { + compatible = "qcom,smp2p"; + qcom,smem = <435>, <428>; + + interrupts = <GIC_SPI 451 IRQ_TYPE_EDGE_RISING>; + + mboxes = <&apss_shared 14>; + + qcom,local-pid = <0>; + qcom,remote-pid = <1>; + + modem_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + modem_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-slpi { + compatible = "qcom,smp2p"; + qcom,smem = <481>, <430>; + + interrupts = <GIC_SPI 172 IRQ_TYPE_EDGE_RISING>; + + mboxes = <&apss_shared 26>; + + qcom,local-pid = <0>; + qcom,remote-pid = <3>; + + slpi_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + slpi_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + soc: soc@0 { + #address-cells = <2>; + #size-cells = <2>; + ranges = <0 0 0 0 0x10 0>; + dma-ranges = <0 0 0 0 0x10 0>; + compatible = "simple-bus"; + + gcc: clock-controller@100000 { + compatible = "qcom,gcc-sm8150"; + reg = <0x0 0x00100000 0x0 0x1f0000>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + clock-names = "bi_tcxo", + "sleep_clk"; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&sleep_clk>; + }; + + qupv3_id_1: geniqup@ac0000 { + compatible = "qcom,geni-se-qup"; + reg = <0x0 0x00ac0000 0x0 0x6000>; + clock-names = "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "disabled"; + + uart2: serial@a90000 { + compatible = "qcom,geni-debug-uart"; + reg = <0x0 0x00a90000 0x0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + }; + + ufs_mem_hc: ufshc@1d84000 { + compatible = "qcom,sm8150-ufshc", "qcom,ufshc", + "jedec,ufs-2.0"; + reg = <0 0x01d84000 0 0x2500>; + interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; + phys = <&ufs_mem_phy_lanes>; + phy-names = "ufsphy"; + lanes-per-direction = <2>; + #reset-cells = <1>; + resets = <&gcc GCC_UFS_PHY_BCR>; + reset-names = "rst"; + + clock-names = + "core_clk", + "bus_aggr_clk", + "iface_clk", + "core_clk_unipro", + "ref_clk", + "tx_lane0_sync_clk", + "rx_lane0_sync_clk", + "rx_lane1_sync_clk"; + clocks = + <&gcc GCC_UFS_PHY_AXI_CLK>, + <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, + <&gcc GCC_UFS_PHY_AHB_CLK>, + <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>; + freq-table-hz = + <37500000 300000000>, + <0 0>, + <0 0>, + <37500000 300000000>, + <0 0>, + <0 0>, + <0 0>, + <0 0>; + + status = "disabled"; + }; + + ufs_mem_phy: phy@1d87000 { + compatible = "qcom,sm8150-qmp-ufs-phy"; + reg = <0 0x01d87000 0 0x1c0>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + clock-names = "ref", + "ref_aux"; + clocks = <&gcc GCC_UFS_MEM_CLKREF_CLK>, + <&gcc GCC_UFS_PHY_PHY_AUX_CLK>; + + resets = <&ufs_mem_hc 0>; + reset-names = "ufsphy"; + status = "disabled"; + + ufs_mem_phy_lanes: lanes@1d87400 { + reg = <0 0x01d87400 0 0x108>, + <0 0x01d87600 0 0x1e0>, + <0 0x01d87c00 0 0x1dc>, + <0 0x01d87800 0 0x108>, + <0 0x01d87a00 0 0x1e0>; + #phy-cells = <0>; + }; + }; + + tcsr_mutex_regs: syscon@1f40000 { + compatible = "syscon"; + reg = <0x0 0x01f40000 0x0 0x40000>; + }; + + remoteproc_slpi: remoteproc@2400000 { + compatible = "qcom,sm8150-slpi-pas"; + reg = <0x0 0x02400000 0x0 0x4040>; + + interrupts-extended = <&intc GIC_SPI 494 IRQ_TYPE_EDGE_RISING>, + <&slpi_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&slpi_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&slpi_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&slpi_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&aoss_qmp AOSS_QMP_LS_SLPI>, + <&rpmhpd 3>, + <&rpmhpd 2>; + power-domain-names = "load_state", "lcx", "lmx"; + + memory-region = <&slpi_mem>; + + qcom,smem-states = <&slpi_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts = <GIC_SPI 170 IRQ_TYPE_EDGE_RISING>; + label = "dsps"; + qcom,remote-pid = <3>; + mboxes = <&apss_shared 24>; + }; + }; + + tlmm: pinctrl@3100000 { + compatible = "qcom,sm8150-pinctrl"; + reg = <0x0 0x03100000 0x0 0x300000>, + <0x0 0x03500000 0x0 0x300000>, + <0x0 0x03900000 0x0 0x300000>, + <0x0 0x03D00000 0x0 0x300000>; + reg-names = "west", "east", "north", "south"; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-ranges = <&tlmm 0 0 175>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + remoteproc_mpss: remoteproc@4080000 { + compatible = "qcom,sm8150-mpss-pas"; + reg = <0x0 0x04080000 0x0 0x4040>; + + interrupts-extended = <&intc GIC_SPI 266 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", "handover", + "stop-ack", "shutdown-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&aoss_qmp AOSS_QMP_LS_MODEM>, + <&rpmhpd 7>, + <&rpmhpd 0>; + power-domain-names = "load_state", "cx", "mss"; + + memory-region = <&mpss_mem>; + + qcom,smem-states = <&modem_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + glink-edge { + interrupts = <GIC_SPI 449 IRQ_TYPE_EDGE_RISING>; + label = "modem"; + qcom,remote-pid = <1>; + mboxes = <&apss_shared 12>; + }; + }; + + remoteproc_cdsp: remoteproc@8300000 { + compatible = "qcom,sm8150-cdsp-pas"; + reg = <0x0 0x08300000 0x0 0x4040>; + + interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>, + <&cdsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&cdsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&cdsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&cdsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&aoss_qmp AOSS_QMP_LS_CDSP>, + <&rpmhpd 7>; + power-domain-names = "load_state", "cx"; + + memory-region = <&cdsp_mem>; + + qcom,smem-states = <&cdsp_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts = <GIC_SPI 574 IRQ_TYPE_EDGE_RISING>; + label = "cdsp"; + qcom,remote-pid = <5>; + mboxes = <&apss_shared 4>; + }; + }; + + aoss_qmp: power-controller@c300000 { + compatible = "qcom,sm8150-aoss-qmp"; + reg = <0x0 0x0c300000 0x0 0x100000>; + interrupts = <GIC_SPI 389 IRQ_TYPE_EDGE_RISING>; + mboxes = <&apss_shared 0>; + + #clock-cells = <0>; + #power-domain-cells = <1>; + }; + + spmi_bus: spmi@c440000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0x0 0x0c440000 0x0 0x0001100>, + <0x0 0x0c600000 0x0 0x2000000>, + <0x0 0x0e600000 0x0 0x0100000>, + <0x0 0x0e700000 0x0 0x00a0000>, + <0x0 0x0c40a000 0x0 0x0026000>; + reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; + interrupt-names = "periph_irq"; + interrupts = <GIC_SPI 481 IRQ_TYPE_LEVEL_HIGH>; + qcom,ee = <0>; + qcom,channel = <0>; + #address-cells = <2>; + #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <4>; + cell-index = <0>; + }; + + remoteproc_adsp: remoteproc@17300000 { + compatible = "qcom,sm8150-adsp-pas"; + reg = <0x0 0x17300000 0x0 0x4040>; + + interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&aoss_qmp AOSS_QMP_LS_LPASS>, + <&rpmhpd 7>; + power-domain-names = "load_state", "cx"; + + memory-region = <&adsp_mem>; + + qcom,smem-states = <&adsp_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>; + label = "lpass"; + qcom,remote-pid = <2>; + mboxes = <&apss_shared 8>; + }; + }; + + intc: interrupt-controller@17a00000 { + compatible = "arm,gic-v3"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0x0 0x17a00000 0x0 0x10000>, /* GICD */ + <0x0 0x17a60000 0x0 0x100000>; /* GICR * 8 */ + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + }; + + apss_shared: mailbox@17c00000 { + compatible = "qcom,sm8150-apss-shared"; + reg = <0x0 0x17c00000 0x0 0x1000>; + #mbox-cells = <1>; + }; + + watchdog@17c10000 { + compatible = "qcom,apss-wdt-sm8150", "qcom,kpss-wdt"; + reg = <0 0x17c10000 0 0x1000>; + clocks = <&sleep_clk>; + }; + + timer@17c20000 { + #address-cells = <2>; + #size-cells = <2>; + ranges; + compatible = "arm,armv7-timer-mem"; + reg = <0x0 0x17c20000 0x0 0x1000>; + clock-frequency = <19200000>; + + frame@17c21000{ + frame-number = <0>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0 0x17c21000 0x0 0x1000>, + <0x0 0x17c22000 0x0 0x1000>; + }; + + frame@17c23000 { + frame-number = <1>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0 0x17c23000 0x0 0x1000>; + status = "disabled"; + }; + + frame@17c25000 { + frame-number = <2>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0 0x17c25000 0x0 0x1000>; + status = "disabled"; + }; + + frame@17c27000 { + frame-number = <3>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0 0x17c26000 0x0 0x1000>; + status = "disabled"; + }; + + frame@17c29000 { + frame-number = <4>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0 0x17c29000 0x0 0x1000>; + status = "disabled"; + }; + + frame@17c2b000 { + frame-number = <5>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0 0x17c2b000 0x0 0x1000>; + status = "disabled"; + }; + + frame@17c2d000 { + frame-number = <6>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0 0x17c2d000 0x0 0x1000>; + status = "disabled"; + }; + }; + + apps_rsc: rsc@18200000 { + label = "apps_rsc"; + compatible = "qcom,rpmh-rsc"; + reg = <0x0 0x18200000 0x0 0x10000>, + <0x0 0x18210000 0x0 0x10000>, + <0x0 0x18220000 0x0 0x10000>; + reg-names = "drv-0", "drv-1", "drv-2"; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + qcom,tcs-offset = <0xd00>; + qcom,drv-id = <2>; + qcom,tcs-config = <ACTIVE_TCS 2>, + <SLEEP_TCS 1>, + <WAKE_TCS 1>, + <CONTROL_TCS 0>; + + rpmhcc: clock-controller { + compatible = "qcom,sm8150-rpmh-clk"; + #clock-cells = <1>; + clock-names = "xo"; + clocks = <&xo_board>; + }; + + rpmhpd: power-controller { + compatible = "qcom,sm8150-rpmhpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmhpd_opp_table>; + + rpmhpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmhpd_opp_ret: opp1 { + opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>; + }; + + rpmhpd_opp_min_svs: opp2 { + opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>; + }; + + rpmhpd_opp_low_svs: opp3 { + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; + }; + + rpmhpd_opp_svs: opp4 { + opp-level = <RPMH_REGULATOR_LEVEL_SVS>; + }; + + rpmhpd_opp_svs_l1: opp5 { + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; + }; + + rpmhpd_opp_svs_l2: opp6 { + opp-level = <224>; + }; + + rpmhpd_opp_nom: opp7 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM>; + }; + + rpmhpd_opp_nom_l1: opp8 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>; + }; + + rpmhpd_opp_nom_l2: opp9 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>; + }; + + rpmhpd_opp_turbo: opp10 { + opp-level = <RPMH_REGULATOR_LEVEL_TURBO>; + }; + + rpmhpd_opp_turbo_l1: opp11 { + opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>; + }; + }; + }; + }; + + cpufreq_hw: cpufreq@18323000 { + compatible = "qcom,cpufreq-hw"; + reg = <0 0x18323000 0 0x1400>, <0 0x18325800 0 0x1400>, + <0 0x18327800 0 0x1400>; + reg-names = "freq-domain0", "freq-domain1", + "freq-domain2"; + + clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>; + clock-names = "xo", "alternate"; + + #freq-domain-cells = <1>; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 1 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 2 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 3 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 0 IRQ_TYPE_LEVEL_LOW>; + }; +}; diff --git a/arch/arm64/boot/dts/realtek/Makefile b/arch/arm64/boot/dts/realtek/Makefile index 90c897ac3f7a..555638ada721 100644 --- a/arch/arm64/boot/dts/realtek/Makefile +++ b/arch/arm64/boot/dts/realtek/Makefile @@ -1,4 +1,9 @@ # SPDX-License-Identifier: GPL-2.0-only + +dtb-$(CONFIG_ARCH_REALTEK) += rtd1293-ds418j.dtb + dtb-$(CONFIG_ARCH_REALTEK) += rtd1295-mele-v9.dtb dtb-$(CONFIG_ARCH_REALTEK) += rtd1295-probox2-ava.dtb dtb-$(CONFIG_ARCH_REALTEK) += rtd1295-zidoo-x9s.dtb + +dtb-$(CONFIG_ARCH_REALTEK) += rtd1296-ds418.dtb diff --git a/arch/arm64/boot/dts/realtek/rtd1293-ds418j.dts b/arch/arm64/boot/dts/realtek/rtd1293-ds418j.dts new file mode 100644 index 000000000000..b2dd583146b4 --- /dev/null +++ b/arch/arm64/boot/dts/realtek/rtd1293-ds418j.dts @@ -0,0 +1,30 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause) +/* + * Copyright (c) 2017 Andreas Färber + */ + +/dts-v1/; + +#include "rtd1293.dtsi" + +/ { + compatible = "synology,ds418j", "realtek,rtd1293"; + model = "Synology DiskStation DS418j"; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x40000000>; + }; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/realtek/rtd1293.dtsi b/arch/arm64/boot/dts/realtek/rtd1293.dtsi new file mode 100644 index 000000000000..bd4e22723f7b --- /dev/null +++ b/arch/arm64/boot/dts/realtek/rtd1293.dtsi @@ -0,0 +1,51 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause) +/* + * Realtek RTD1293 SoC + * + * Copyright (c) 2017-2019 Andreas Färber + */ + +#include "rtd129x.dtsi" + +/ { + compatible = "realtek,rtd1293"; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x0>; + next-level-cache = <&l2>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x1>; + next-level-cache = <&l2>; + }; + + l2: l2-cache { + compatible = "cache"; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 + (GIC_CPU_MASK_RAW(0xf) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 + (GIC_CPU_MASK_RAW(0xf) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 + (GIC_CPU_MASK_RAW(0xf) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 + (GIC_CPU_MASK_RAW(0xf) | IRQ_TYPE_LEVEL_LOW)>; + }; +}; + +&arm_pmu { + interrupt-affinity = <&cpu0>, <&cpu1>; +}; diff --git a/arch/arm64/boot/dts/realtek/rtd1295-zidoo-x9s.dts b/arch/arm64/boot/dts/realtek/rtd1295-zidoo-x9s.dts index da19faab29d5..e98e508b9514 100644 --- a/arch/arm64/boot/dts/realtek/rtd1295-zidoo-x9s.dts +++ b/arch/arm64/boot/dts/realtek/rtd1295-zidoo-x9s.dts @@ -1,7 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause) /* * Copyright (c) 2016-2017 Andreas Färber - * - * SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ /dts-v1/; diff --git a/arch/arm64/boot/dts/realtek/rtd1295.dtsi b/arch/arm64/boot/dts/realtek/rtd1295.dtsi index 41d7858da826..93f0e1d97721 100644 --- a/arch/arm64/boot/dts/realtek/rtd1295.dtsi +++ b/arch/arm64/boot/dts/realtek/rtd1295.dtsi @@ -1,9 +1,8 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause) /* * Realtek RTD1295 SoC * * Copyright (c) 2016-2017 Andreas Färber - * - * SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ #include "rtd129x.dtsi" diff --git a/arch/arm64/boot/dts/realtek/rtd1296-ds418.dts b/arch/arm64/boot/dts/realtek/rtd1296-ds418.dts new file mode 100644 index 000000000000..5a051a52bf88 --- /dev/null +++ b/arch/arm64/boot/dts/realtek/rtd1296-ds418.dts @@ -0,0 +1,30 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause) +/* + * Copyright (c) 2017-2019 Andreas Färber + */ + +/dts-v1/; + +#include "rtd1296.dtsi" + +/ { + compatible = "synology,ds418", "realtek,rtd1296"; + model = "Synology DiskStation DS418"; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x80000000>; + }; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/realtek/rtd1296.dtsi b/arch/arm64/boot/dts/realtek/rtd1296.dtsi new file mode 100644 index 000000000000..0f9e59cac086 --- /dev/null +++ b/arch/arm64/boot/dts/realtek/rtd1296.dtsi @@ -0,0 +1,65 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause) +/* + * Realtek RTD1296 SoC + * + * Copyright (c) 2017-2019 Andreas Färber + */ + +#include "rtd129x.dtsi" + +/ { + compatible = "realtek,rtd1296"; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x0>; + next-level-cache = <&l2>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x1>; + next-level-cache = <&l2>; + }; + + cpu2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x2>; + next-level-cache = <&l2>; + }; + + cpu3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x3>; + next-level-cache = <&l2>; + }; + + l2: l2-cache { + compatible = "cache"; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 + (GIC_CPU_MASK_RAW(0xf) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 + (GIC_CPU_MASK_RAW(0xf) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 + (GIC_CPU_MASK_RAW(0xf) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 + (GIC_CPU_MASK_RAW(0xf) | IRQ_TYPE_LEVEL_LOW)>; + }; +}; + +&arm_pmu { + interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; +}; diff --git a/arch/arm64/boot/dts/realtek/rtd129x.dtsi b/arch/arm64/boot/dts/realtek/rtd129x.dtsi index b9cb92466fc7..4433114476f5 100644 --- a/arch/arm64/boot/dts/realtek/rtd129x.dtsi +++ b/arch/arm64/boot/dts/realtek/rtd129x.dtsi @@ -1,9 +1,8 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause) /* * Realtek RTD1293/RTD1295/RTD1296 SoC * * Copyright (c) 2016-2017 Andreas Färber - * - * SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ /memreserve/ 0x0000000000000000 0x0000000000030000; @@ -13,6 +12,7 @@ /memreserve/ 0x0000000001ffe000 0x0000000000004000; #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/reset/realtek,rtd1295.h> / { interrupt-parent = <&gic>; @@ -24,6 +24,13 @@ interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; }; + osc27M: osc { + compatible = "fixed-clock"; + clock-frequency = <27000000>; + #clock-cells = <0>; + clock-output-names = "osc27M"; + }; + soc { compatible = "simple-bus"; #address-cells = <1>; @@ -31,12 +38,49 @@ /* Exclude up to 2 GiB of RAM */ ranges = <0x80000000 0x80000000 0x80000000>; + reset1: reset-controller@98000000 { + compatible = "snps,dw-low-reset"; + reg = <0x98000000 0x4>; + #reset-cells = <1>; + }; + + reset2: reset-controller@98000004 { + compatible = "snps,dw-low-reset"; + reg = <0x98000004 0x4>; + #reset-cells = <1>; + }; + + reset3: reset-controller@98000008 { + compatible = "snps,dw-low-reset"; + reg = <0x98000008 0x4>; + #reset-cells = <1>; + }; + + reset4: reset-controller@98000050 { + compatible = "snps,dw-low-reset"; + reg = <0x98000050 0x4>; + #reset-cells = <1>; + }; + + iso_reset: reset-controller@98007088 { + compatible = "snps,dw-low-reset"; + reg = <0x98007088 0x4>; + #reset-cells = <1>; + }; + + wdt: watchdog@98007680 { + compatible = "realtek,rtd1295-watchdog"; + reg = <0x98007680 0x100>; + clocks = <&osc27M>; + }; + uart0: serial@98007800 { compatible = "snps,dw-apb-uart"; reg = <0x98007800 0x400>; reg-shift = <2>; reg-io-width = <4>; clock-frequency = <27000000>; + resets = <&iso_reset RTD1295_ISO_RSTN_UR0>; status = "disabled"; }; @@ -46,6 +90,7 @@ reg-shift = <2>; reg-io-width = <4>; clock-frequency = <432000000>; + resets = <&reset2 RTD1295_RSTN_UR1>; status = "disabled"; }; @@ -55,6 +100,7 @@ reg-shift = <2>; reg-io-width = <4>; clock-frequency = <432000000>; + resets = <&reset2 RTD1295_RSTN_UR2>; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile index 42b74c283289..2153842321ce 100644 --- a/arch/arm64/boot/dts/renesas/Makefile +++ b/arch/arm64/boot/dts/renesas/Makefile @@ -1,18 +1,23 @@ # SPDX-License-Identifier: GPL-2.0 dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m.dtb dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m-ex.dtb -dtb-$(CONFIG_ARCH_R8A774C0) += r8a774c0-cat874.dtb r8a774c0-ek874.dtb -dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-salvator-x.dtb r8a7795-h3ulcb.dtb -dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-h3ulcb-kf.dtb -dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-salvator-xs.dtb -dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-es1-salvator-x.dtb r8a7795-es1-h3ulcb.dtb -dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-es1-h3ulcb-kf.dtb -dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-salvator-x.dtb r8a7796-m3ulcb.dtb -dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-m3ulcb-kf.dtb -dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-salvator-xs.dtb +dtb-$(CONFIG_ARCH_R8A774B1) += r8a774b1-hihope-rzg2n.dtb +dtb-$(CONFIG_ARCH_R8A774B1) += r8a774b1-hihope-rzg2n-ex.dtb +dtb-$(CONFIG_ARCH_R8A774C0) += r8a774c0-cat874.dtb r8a774c0-ek874.dtb \ + r8a774c0-ek874-idk-2121wr.dtb +dtb-$(CONFIG_ARCH_R8A7795) += r8a77950-salvator-x.dtb +dtb-$(CONFIG_ARCH_R8A7795) += r8a77950-ulcb.dtb r8a77950-ulcb-kf.dtb +dtb-$(CONFIG_ARCH_R8A7795) += r8a77951-salvator-x.dtb r8a77951-salvator-xs.dtb +dtb-$(CONFIG_ARCH_R8A7795) += r8a77951-ulcb.dtb r8a77951-ulcb-kf.dtb +dtb-$(CONFIG_ARCH_R8A77950) += r8a77950-salvator-x.dtb +dtb-$(CONFIG_ARCH_R8A77950) += r8a77950-ulcb.dtb r8a77950-ulcb-kf.dtb +dtb-$(CONFIG_ARCH_R8A77951) += r8a77951-salvator-x.dtb r8a77951-salvator-xs.dtb +dtb-$(CONFIG_ARCH_R8A77951) += r8a77951-ulcb.dtb r8a77951-ulcb-kf.dtb +dtb-$(CONFIG_ARCH_R8A77960) += r8a77960-salvator-x.dtb r8a77960-salvator-xs.dtb +dtb-$(CONFIG_ARCH_R8A77960) += r8a77960-ulcb.dtb r8a77960-ulcb-kf.dtb +dtb-$(CONFIG_ARCH_R8A77961) += r8a77961-salvator-xs.dtb dtb-$(CONFIG_ARCH_R8A77965) += r8a77965-salvator-x.dtb r8a77965-salvator-xs.dtb -dtb-$(CONFIG_ARCH_R8A77965) += r8a77965-m3nulcb.dtb -dtb-$(CONFIG_ARCH_R8A77965) += r8a77965-m3nulcb-kf.dtb +dtb-$(CONFIG_ARCH_R8A77965) += r8a77965-ulcb.dtb r8a77965-ulcb-kf.dtb dtb-$(CONFIG_ARCH_R8A77970) += r8a77970-eagle.dtb r8a77970-v3msk.dtb dtb-$(CONFIG_ARCH_R8A77980) += r8a77980-condor.dtb r8a77980-v3hsk.dtb dtb-$(CONFIG_ARCH_R8A77990) += r8a77990-ebisu.dtb diff --git a/arch/arm64/boot/dts/renesas/hihope-common.dtsi b/arch/arm64/boot/dts/renesas/hihope-common.dtsi index 3311a982fff8..bd056904e8bd 100644 --- a/arch/arm64/boot/dts/renesas/hihope-common.dtsi +++ b/arch/arm64/boot/dts/renesas/hihope-common.dtsi @@ -10,6 +10,7 @@ / { aliases { serial0 = &scif2; + serial1 = &hscif0; }; chosen { @@ -31,6 +32,13 @@ leds { compatible = "gpio-leds"; + bt_active_led { + label = "blue:bt"; + gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "hci0-power"; + default-state = "off"; + }; + led0 { gpios = <&gpio6 11 GPIO_ACTIVE_HIGH>; }; @@ -46,6 +54,13 @@ led3 { gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>; }; + + wlan_active_led { + label = "yellow:wlan"; + gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "phy0tx"; + default-state = "off"; + }; }; reg_1p8v: regulator0 { @@ -66,6 +81,14 @@ regulator-always-on; }; + sound_card: sound { + compatible = "audio-graph-card"; + + label = "rcar-sound"; + + dais = <&rsnd_port>; + }; + vbus0_usb2: regulator-vbus0-usb2 { compatible = "regulator-fixed"; @@ -86,8 +109,18 @@ gpios = <&gpio6 30 GPIO_ACTIVE_HIGH>; gpios-states = <1>; - states = <3300000 1 - 1800000 0>; + states = <3300000 1>, <1800000 0>; + }; + + wlan_en_reg: regulator-wlan_en { + compatible = "regulator-fixed"; + regulator-name = "wlan-en-regulator"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + startup-delay-us = <70000>; + + gpio = <&gpio_expander 1 GPIO_ACTIVE_HIGH>; + enable-active-high; }; x302_clk: x302-clock { @@ -103,15 +136,11 @@ }; }; +&audio_clk_a { + clock-frequency = <22579200>; +}; + &du { - clocks = <&cpg CPG_MOD 724>, - <&cpg CPG_MOD 723>, - <&cpg CPG_MOD 722>, - <&versaclock5 1>, - <&x302_clk>, - <&versaclock5 2>; - clock-names = "du.0", "du.1", "du.2", - "dclkin.0", "dclkin.1", "dclkin.2"; status = "okay"; }; @@ -150,6 +179,25 @@ remote-endpoint = <&hdmi0_con>; }; }; + port@2 { + reg = <2>; + dw_hdmi0_snd_in: endpoint { + remote-endpoint = <&rsnd_endpoint>; + }; + }; + }; +}; + +&hscif0 { + pinctrl-0 = <&hscif0_pins>; + pinctrl-names = "default"; + + uart-has-rtscts; + status = "okay"; + + bluetooth { + compatible = "ti,wl1837-st"; + enable-gpios = <&gpio_expander 2 GPIO_ACTIVE_HIGH>; }; }; @@ -162,6 +210,13 @@ clock-frequency = <400000>; status = "okay"; + gpio_expander: gpio@20 { + compatible = "onnn,pca9654"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + }; + versaclock5: clock-generator@6a { compatible = "idt,5p49v5923"; reg = <0x6a>; @@ -187,6 +242,11 @@ pinctrl-0 = <&scif_clk_pins>; pinctrl-names = "default"; + hscif0_pins: hscif0 { + groups = "hscif0_data", "hscif0_ctrl"; + function = "hscif0"; + }; + scif2_pins: scif2 { groups = "scif2_data_a"; function = "scif2"; @@ -209,12 +269,23 @@ power-source = <1800>; }; + sdhi2_pins: sd2 { + groups = "sdhi2_data4", "sdhi2_ctrl"; + function = "sdhi2"; + power-source = <1800>; + }; + sdhi3_pins: sd3 { groups = "sdhi3_data8", "sdhi3_ctrl", "sdhi3_ds"; function = "sdhi3"; power-source = <1800>; }; + sound_clk_pins: sound_clk { + groups = "audio_clk_a_a"; + function = "audio_clk"; + }; + usb0_pins: usb0 { groups = "usb0"; function = "usb0"; @@ -238,6 +309,28 @@ }; }; +&rcar_sound { + pinctrl-0 = <&sound_clk_pins>; + pinctrl-names = "default"; + + status = "okay"; + + /* Single DAI */ + #sound-dai-cells = <0>; + + rsnd_port: port { + rsnd_endpoint: endpoint { + remote-endpoint = <&dw_hdmi0_snd_in>; + + dai-format = "i2s"; + bitclock-master = <&rsnd_endpoint>; + frame-master = <&rsnd_endpoint>; + + playback = <&ssi2>; + }; + }; +}; + &rwdt { timeout-sec = <60>; status = "okay"; @@ -268,6 +361,27 @@ status = "okay"; }; +&sdhi2 { + status = "okay"; + pinctrl-0 = <&sdhi2_pins>; + pinctrl-names = "default"; + + vmmc-supply = <&wlan_en_reg>; + bus-width = <4>; + non-removable; + cap-power-off-card; + keep-power-in-suspend; + + #address-cells = <1>; + #size-cells = <0>; + wlcore: wlcore@2 { + compatible = "ti,wl1837"; + reg = <2>; + interrupt-parent = <&gpio2>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH>; + }; +}; + &sdhi3 { pinctrl-0 = <&sdhi3_pins>; pinctrl-1 = <&sdhi3_pins>; @@ -279,6 +393,7 @@ mmc-hs200-1_8v; non-removable; fixed-emmc-driver-type = <1>; + status = "okay"; }; &usb_extal_clk { diff --git a/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi b/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi index 07a6eeaed12e..28fe17e3bc4e 100644 --- a/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi +++ b/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi @@ -13,6 +13,14 @@ chosen { bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm0 0 50000>; + + brightness-levels = <0 2 8 16 32 64 128 255>; + default-brightness-level = <6>; + }; }; &avb { @@ -31,11 +39,48 @@ }; }; -&pciec0 { +&can0 { + pinctrl-0 = <&can0_pins>; + pinctrl-names = "default"; status = "okay"; }; -&pciec1 { +&can1 { + pinctrl-0 = <&can1_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&gpio1 { + /* + * When GP1_20 is LOW LVDS0 is connected to the LVDS connector + * When GP1_20 is HIGH LVDS0 is connected to the LT8918L + */ + lvds-connector-en-gpio { + gpio-hog; + gpios = <20 GPIO_ACTIVE_HIGH>; + output-low; + line-name = "lvds-connector-en-gpio"; + }; +}; + +&lvds0 { + /* + * Please include the LVDS panel .dtsi file and uncomment the below line + * to enable LVDS panel connected to RZ/G2[MN] boards. + */ + + /* status = "okay"; */ + + ports { + port@1 { + lvds_connector: endpoint { + }; + }; + }; +}; + +&pciec0 { status = "okay"; }; @@ -60,4 +105,26 @@ drive-strength = <12>; }; }; + + can0_pins: can0 { + groups = "can0_data_a"; + function = "can0"; + }; + + can1_pins: can1 { + groups = "can1_data"; + function = "can1"; + }; + + pwm0_pins: pwm0 { + groups = "pwm0"; + function = "pwm0"; + }; +}; + +&pwm0 { + pinctrl-0 = <&pwm0_pins>; + pinctrl-names = "default"; + + status = "okay"; }; diff --git a/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-ex.dts b/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-ex.dts index 6e33a3b27706..c754fca239d9 100644 --- a/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-ex.dts +++ b/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-ex.dts @@ -13,3 +13,7 @@ compatible = "hoperun,hihope-rzg2-ex", "hoperun,hihope-rzg2m", "renesas,r8a774a1"; }; + +&pciec1 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m.dts b/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m.dts index 93ca973c856c..96f2fb080a1a 100644 --- a/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m.dts +++ b/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m.dts @@ -24,3 +24,14 @@ reg = <0x6 0x00000000 0x0 0x80000000>; }; }; + +&du { + clocks = <&cpg CPG_MOD 724>, + <&cpg CPG_MOD 723>, + <&cpg CPG_MOD 722>, + <&versaclock5 1>, + <&x302_clk>, + <&versaclock5 2>; + clock-names = "du.0", "du.1", "du.2", + "dclkin.0", "dclkin.1", "dclkin.2"; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi index f209457c7807..8f950dabca54 100644 --- a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi @@ -521,12 +521,12 @@ #interrupt-cells = <2>; interrupt-controller; reg = <0 0xe61c0000 0 0x200>; - interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 407>; power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; resets = <&cpg 407>; @@ -837,8 +837,8 @@ compatible = "renesas,r8a774a1-usb-dmac", "renesas,usb-dmac"; reg = <0 0xe65a0000 0 0x100>; - interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "ch0", "ch1"; clocks = <&cpg CPG_MOD 330>; power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; @@ -851,8 +851,8 @@ compatible = "renesas,r8a774a1-usb-dmac", "renesas,usb-dmac"; reg = <0 0xe65b0000 0 0x100>; - interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "ch0", "ch1"; clocks = <&cpg CPG_MOD 331>; power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; @@ -878,23 +878,23 @@ compatible = "renesas,dmac-r8a774a1", "renesas,rcar-dmac"; reg = <0 0xe6700000 0 0x10000>; - interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", @@ -920,23 +920,23 @@ compatible = "renesas,dmac-r8a774a1", "renesas,rcar-dmac"; reg = <0 0xe7300000 0 0x10000>; - interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", @@ -962,23 +962,23 @@ compatible = "renesas,dmac-r8a774a1", "renesas,rcar-dmac"; reg = <0 0xe7310000 0 0x10000>; - interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", @@ -1128,6 +1128,8 @@ <&cpg CPG_CORE R8A774A1_CLK_CANFD>, <&can_clk>; clock-names = "clkp1", "clkp2", "can_clk"; + assigned-clocks = <&cpg CPG_CORE R8A774A1_CLK_CANFD>; + assigned-clock-rates = <40000000>; power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; resets = <&cpg 916>; status = "disabled"; @@ -1142,11 +1144,38 @@ <&cpg CPG_CORE R8A774A1_CLK_CANFD>, <&can_clk>; clock-names = "clkp1", "clkp2", "can_clk"; + assigned-clocks = <&cpg CPG_CORE R8A774A1_CLK_CANFD>; + assigned-clock-rates = <40000000>; power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; resets = <&cpg 915>; status = "disabled"; }; + canfd: can@e66c0000 { + compatible = "renesas,r8a774a1-canfd", + "renesas,rcar-gen3-canfd"; + reg = <0 0xe66c0000 0 0x8000>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 914>, + <&cpg CPG_CORE R8A774A1_CLK_CANFD>, + <&can_clk>; + clock-names = "fck", "canfd", "can_clk"; + assigned-clocks = <&cpg CPG_CORE R8A774A1_CLK_CANFD>; + assigned-clock-rates = <40000000>; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; + resets = <&cpg 914>; + status = "disabled"; + + channel0 { + status = "disabled"; + }; + + channel1 { + status = "disabled"; + }; + }; + pwm0: pwm@e6e30000 { compatible = "renesas,pwm-r8a774a1", "renesas,pwm-rcar"; reg = <0 0xe6e30000 0 0x8>; @@ -1653,7 +1682,7 @@ <0 0xec5a0000 0 0x100>, /* ADG */ <0 0xec540000 0 0x1000>, /* SSIU */ <0 0xec541000 0 0x280>, /* SSI */ - <0 0xec740000 0 0x200>; /* Audio DMAC peri peri*/ + <0 0xec760000 0 0x200>; /* Audio DMAC peri peri*/ reg-names = "scu", "adg", "ssiu", "ssi", "audmapp"; clocks = <&cpg CPG_MOD 1005>, @@ -1697,6 +1726,17 @@ "ssi.1", "ssi.0"; status = "disabled"; + rcar_sound,ctu { + ctu00: ctu-0 { }; + ctu01: ctu-1 { }; + ctu02: ctu-2 { }; + ctu03: ctu-3 { }; + ctu10: ctu-4 { }; + ctu11: ctu-5 { }; + ctu12: ctu-6 { }; + ctu13: ctu-7 { }; + }; + rcar_sound,dvc { dvc0: dvc-0 { dmas = <&audma1 0xbc>; @@ -1713,17 +1753,6 @@ mix1: mix-1 { }; }; - rcar_sound,ctu { - ctu00: ctu-0 { }; - ctu01: ctu-1 { }; - ctu02: ctu-2 { }; - ctu03: ctu-3 { }; - ctu10: ctu-4 { }; - ctu11: ctu-5 { }; - ctu12: ctu-6 { }; - ctu13: ctu-7 { }; - }; - rcar_sound,src { src0: src-0 { interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>; @@ -1780,64 +1809,264 @@ rcar_sound,ssi { ssi0: ssi-0 { interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x01>, <&audma1 0x02>, <&audma0 0x15>, <&audma1 0x16>; - dma-names = "rx", "tx", "rxu", "txu"; + dmas = <&audma0 0x01>, <&audma1 0x02>; + dma-names = "rx", "tx"; }; ssi1: ssi-1 { interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x03>, <&audma1 0x04>, <&audma0 0x49>, <&audma1 0x4a>; - dma-names = "rx", "tx", "rxu", "txu"; + dmas = <&audma0 0x03>, <&audma1 0x04>; + dma-names = "rx", "tx"; }; ssi2: ssi-2 { interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x05>, <&audma1 0x06>, <&audma0 0x63>, <&audma1 0x64>; - dma-names = "rx", "tx", "rxu", "txu"; + dmas = <&audma0 0x05>, <&audma1 0x06>; + dma-names = "rx", "tx"; }; ssi3: ssi-3 { interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x07>, <&audma1 0x08>, <&audma0 0x6f>, <&audma1 0x70>; - dma-names = "rx", "tx", "rxu", "txu"; + dmas = <&audma0 0x07>, <&audma1 0x08>; + dma-names = "rx", "tx"; }; ssi4: ssi-4 { interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x09>, <&audma1 0x0a>, <&audma0 0x71>, <&audma1 0x72>; - dma-names = "rx", "tx", "rxu", "txu"; + dmas = <&audma0 0x09>, <&audma1 0x0a>; + dma-names = "rx", "tx"; }; ssi5: ssi-5 { interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x0b>, <&audma1 0x0c>, <&audma0 0x73>, <&audma1 0x74>; - dma-names = "rx", "tx", "rxu", "txu"; + dmas = <&audma0 0x0b>, <&audma1 0x0c>; + dma-names = "rx", "tx"; }; ssi6: ssi-6 { interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x0d>, <&audma1 0x0e>, <&audma0 0x75>, <&audma1 0x76>; - dma-names = "rx", "tx", "rxu", "txu"; + dmas = <&audma0 0x0d>, <&audma1 0x0e>; + dma-names = "rx", "tx"; }; ssi7: ssi-7 { interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x0f>, <&audma1 0x10>, <&audma0 0x79>, <&audma1 0x7a>; - dma-names = "rx", "tx", "rxu", "txu"; + dmas = <&audma0 0x0f>, <&audma1 0x10>; + dma-names = "rx", "tx"; }; ssi8: ssi-8 { interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x11>, <&audma1 0x12>, <&audma0 0x7b>, <&audma1 0x7c>; - dma-names = "rx", "tx", "rxu", "txu"; + dmas = <&audma0 0x11>, <&audma1 0x12>; + dma-names = "rx", "tx"; }; ssi9: ssi-9 { interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x13>, <&audma1 0x14>, <&audma0 0x7d>, <&audma1 0x7e>; - dma-names = "rx", "tx", "rxu", "txu"; + dmas = <&audma0 0x13>, <&audma1 0x14>; + dma-names = "rx", "tx"; }; }; - ports { - #address-cells = <1>; - #size-cells = <0>; - port@0 { - reg = <0>; + rcar_sound,ssiu { + ssiu00: ssiu-0 { + dmas = <&audma0 0x15>, <&audma1 0x16>; + dma-names = "rx", "tx"; }; - port@1 { - reg = <1>; + ssiu01: ssiu-1 { + dmas = <&audma0 0x35>, <&audma1 0x36>; + dma-names = "rx", "tx"; + }; + ssiu02: ssiu-2 { + dmas = <&audma0 0x37>, <&audma1 0x38>; + dma-names = "rx", "tx"; + }; + ssiu03: ssiu-3 { + dmas = <&audma0 0x47>, <&audma1 0x48>; + dma-names = "rx", "tx"; + }; + ssiu04: ssiu-4 { + dmas = <&audma0 0x3F>, <&audma1 0x40>; + dma-names = "rx", "tx"; + }; + ssiu05: ssiu-5 { + dmas = <&audma0 0x43>, <&audma1 0x44>; + dma-names = "rx", "tx"; + }; + ssiu06: ssiu-6 { + dmas = <&audma0 0x4F>, <&audma1 0x50>; + dma-names = "rx", "tx"; + }; + ssiu07: ssiu-7 { + dmas = <&audma0 0x53>, <&audma1 0x54>; + dma-names = "rx", "tx"; + }; + ssiu10: ssiu-8 { + dmas = <&audma0 0x49>, <&audma1 0x4a>; + dma-names = "rx", "tx"; + }; + ssiu11: ssiu-9 { + dmas = <&audma0 0x4B>, <&audma1 0x4C>; + dma-names = "rx", "tx"; + }; + ssiu12: ssiu-10 { + dmas = <&audma0 0x57>, <&audma1 0x58>; + dma-names = "rx", "tx"; + }; + ssiu13: ssiu-11 { + dmas = <&audma0 0x59>, <&audma1 0x5A>; + dma-names = "rx", "tx"; + }; + ssiu14: ssiu-12 { + dmas = <&audma0 0x5F>, <&audma1 0x60>; + dma-names = "rx", "tx"; + }; + ssiu15: ssiu-13 { + dmas = <&audma0 0xC3>, <&audma1 0xC4>; + dma-names = "rx", "tx"; + }; + ssiu16: ssiu-14 { + dmas = <&audma0 0xC7>, <&audma1 0xC8>; + dma-names = "rx", "tx"; + }; + ssiu17: ssiu-15 { + dmas = <&audma0 0xCB>, <&audma1 0xCC>; + dma-names = "rx", "tx"; + }; + ssiu20: ssiu-16 { + dmas = <&audma0 0x63>, <&audma1 0x64>; + dma-names = "rx", "tx"; + }; + ssiu21: ssiu-17 { + dmas = <&audma0 0x67>, <&audma1 0x68>; + dma-names = "rx", "tx"; + }; + ssiu22: ssiu-18 { + dmas = <&audma0 0x6B>, <&audma1 0x6C>; + dma-names = "rx", "tx"; + }; + ssiu23: ssiu-19 { + dmas = <&audma0 0x6D>, <&audma1 0x6E>; + dma-names = "rx", "tx"; + }; + ssiu24: ssiu-20 { + dmas = <&audma0 0xCF>, <&audma1 0xCE>; + dma-names = "rx", "tx"; + }; + ssiu25: ssiu-21 { + dmas = <&audma0 0xEB>, <&audma1 0xEC>; + dma-names = "rx", "tx"; + }; + ssiu26: ssiu-22 { + dmas = <&audma0 0xED>, <&audma1 0xEE>; + dma-names = "rx", "tx"; + }; + ssiu27: ssiu-23 { + dmas = <&audma0 0xEF>, <&audma1 0xF0>; + dma-names = "rx", "tx"; + }; + ssiu30: ssiu-24 { + dmas = <&audma0 0x6f>, <&audma1 0x70>; + dma-names = "rx", "tx"; + }; + ssiu31: ssiu-25 { + dmas = <&audma0 0x21>, <&audma1 0x22>; + dma-names = "rx", "tx"; + }; + ssiu32: ssiu-26 { + dmas = <&audma0 0x23>, <&audma1 0x24>; + dma-names = "rx", "tx"; + }; + ssiu33: ssiu-27 { + dmas = <&audma0 0x25>, <&audma1 0x26>; + dma-names = "rx", "tx"; + }; + ssiu34: ssiu-28 { + dmas = <&audma0 0x27>, <&audma1 0x28>; + dma-names = "rx", "tx"; + }; + ssiu35: ssiu-29 { + dmas = <&audma0 0x29>, <&audma1 0x2A>; + dma-names = "rx", "tx"; + }; + ssiu36: ssiu-30 { + dmas = <&audma0 0x2B>, <&audma1 0x2C>; + dma-names = "rx", "tx"; + }; + ssiu37: ssiu-31 { + dmas = <&audma0 0x2D>, <&audma1 0x2E>; + dma-names = "rx", "tx"; + }; + ssiu40: ssiu-32 { + dmas = <&audma0 0x71>, <&audma1 0x72>; + dma-names = "rx", "tx"; + }; + ssiu41: ssiu-33 { + dmas = <&audma0 0x17>, <&audma1 0x18>; + dma-names = "rx", "tx"; + }; + ssiu42: ssiu-34 { + dmas = <&audma0 0x19>, <&audma1 0x1A>; + dma-names = "rx", "tx"; + }; + ssiu43: ssiu-35 { + dmas = <&audma0 0x1B>, <&audma1 0x1C>; + dma-names = "rx", "tx"; + }; + ssiu44: ssiu-36 { + dmas = <&audma0 0x1D>, <&audma1 0x1E>; + dma-names = "rx", "tx"; + }; + ssiu45: ssiu-37 { + dmas = <&audma0 0x1F>, <&audma1 0x20>; + dma-names = "rx", "tx"; + }; + ssiu46: ssiu-38 { + dmas = <&audma0 0x31>, <&audma1 0x32>; + dma-names = "rx", "tx"; + }; + ssiu47: ssiu-39 { + dmas = <&audma0 0x33>, <&audma1 0x34>; + dma-names = "rx", "tx"; + }; + ssiu50: ssiu-40 { + dmas = <&audma0 0x73>, <&audma1 0x74>; + dma-names = "rx", "tx"; + }; + ssiu60: ssiu-41 { + dmas = <&audma0 0x75>, <&audma1 0x76>; + dma-names = "rx", "tx"; + }; + ssiu70: ssiu-42 { + dmas = <&audma0 0x79>, <&audma1 0x7a>; + dma-names = "rx", "tx"; + }; + ssiu80: ssiu-43 { + dmas = <&audma0 0x7b>, <&audma1 0x7c>; + dma-names = "rx", "tx"; + }; + ssiu90: ssiu-44 { + dmas = <&audma0 0x7d>, <&audma1 0x7e>; + dma-names = "rx", "tx"; + }; + ssiu91: ssiu-45 { + dmas = <&audma0 0x7F>, <&audma1 0x80>; + dma-names = "rx", "tx"; + }; + ssiu92: ssiu-46 { + dmas = <&audma0 0x81>, <&audma1 0x82>; + dma-names = "rx", "tx"; + }; + ssiu93: ssiu-47 { + dmas = <&audma0 0x83>, <&audma1 0x84>; + dma-names = "rx", "tx"; + }; + ssiu94: ssiu-48 { + dmas = <&audma0 0xA3>, <&audma1 0xA4>; + dma-names = "rx", "tx"; + }; + ssiu95: ssiu-49 { + dmas = <&audma0 0xA5>, <&audma1 0xA6>; + dma-names = "rx", "tx"; + }; + ssiu96: ssiu-50 { + dmas = <&audma0 0xA7>, <&audma1 0xA8>; + dma-names = "rx", "tx"; + }; + ssiu97: ssiu-51 { + dmas = <&audma0 0xA9>, <&audma1 0xAA>; + dma-names = "rx", "tx"; }; }; }; @@ -1846,23 +2075,23 @@ compatible = "renesas,dmac-r8a774a1", "renesas,rcar-dmac"; reg = <0 0xec700000 0 0x10000>; - interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", @@ -1888,23 +2117,23 @@ compatible = "renesas,dmac-r8a774a1", "renesas,rcar-dmac"; reg = <0 0xec720000 0 0x10000>; - interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", @@ -2094,10 +2323,10 @@ #size-cells = <2>; bus-range = <0x00 0xff>; device_type = "pci"; - ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000 - 0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000 - 0x02000000 0 0x30000000 0 0x30000000 0 0x08000000 - 0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>; + ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000>, + <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>, + <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>, + <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>; /* Map all possible DDR as inbound ranges */ dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>; interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, @@ -2121,10 +2350,10 @@ #size-cells = <2>; bus-range = <0x00 0xff>; device_type = "pci"; - ranges = <0x01000000 0 0x00000000 0 0xee900000 0 0x00100000 - 0x02000000 0 0xeea00000 0 0xeea00000 0 0x00200000 - 0x02000000 0 0xc0000000 0 0xc0000000 0 0x08000000 - 0x42000000 0 0xc8000000 0 0xc8000000 0 0x08000000>; + ranges = <0x01000000 0 0x00000000 0 0xee900000 0 0x00100000>, + <0x02000000 0 0xeea00000 0 0xeea00000 0 0x00200000>, + <0x02000000 0 0xc0000000 0 0xc0000000 0 0x08000000>, + <0x42000000 0 0xc8000000 0 0xc8000000 0 0x08000000>; /* Map all possible DDR as inbound ranges */ dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>; interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, @@ -2411,7 +2640,7 @@ clock-names = "du.0", "du.1", "du.2"; status = "disabled"; - vsps = <&vspd0 &vspd1 &vspd2>; + vsps = <&vspd0 0>, <&vspd1 0>, <&vspd2 0>; ports { #address-cells = <1>; @@ -2506,6 +2735,18 @@ thermal-sensors = <&tsc 2>; sustainable-power = <3874>; + cooling-maps { + map0 { + trip = <&target>; + cooling-device = <&a57_0 0 2>; + contribution = <1024>; + }; + map1 { + trip = <&target>; + cooling-device = <&a53_0 0 2>; + contribution = <1024>; + }; + }; trips { target: trip-point1 { temperature = <100000>; @@ -2519,18 +2760,6 @@ type = "critical"; }; }; - cooling-maps { - map0 { - trip = <&target>; - cooling-device = <&a57_0 0 2>; - contribution = <1024>; - }; - map1 { - trip = <&target>; - cooling-device = <&a53_0 0 2>; - contribution = <1024>; - }; - }; }; }; diff --git a/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-ex.dts b/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-ex.dts new file mode 100644 index 000000000000..ab47c0bd9c19 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-ex.dts @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the HiHope RZ/G2N sub board + * + * Copyright (C) 2019 Renesas Electronics Corp. + */ + +#include "r8a774b1-hihope-rzg2n.dts" +#include "hihope-rzg2-ex.dtsi" + +/ { + model = "HopeRun HiHope RZ/G2N with sub board"; + compatible = "hoperun,hihope-rzg2-ex", "hoperun,hihope-rzg2n", + "renesas,r8a774b1"; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n.dts b/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n.dts new file mode 100644 index 000000000000..9910c1aa0a61 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n.dts @@ -0,0 +1,41 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the HiHope RZ/G2N main board + * + * Copyright (C) 2019 Renesas Electronics Corp. + */ + +/dts-v1/; +#include "r8a774b1.dtsi" +#include "hihope-common.dtsi" + +/ { + model = "HopeRun HiHope RZ/G2N main board based on r8a774b1"; + compatible = "hoperun,hihope-rzg2n", "renesas,r8a774b1"; + + memory@48000000 { + device_type = "memory"; + /* first 128MB is reserved for secure area. */ + reg = <0x0 0x48000000 0x0 0x78000000>; + }; + + memory@480000000 { + device_type = "memory"; + reg = <0x4 0x80000000 0x0 0x80000000>; + }; +}; + +&du { + clocks = <&cpg CPG_MOD 724>, + <&cpg CPG_MOD 723>, + <&cpg CPG_MOD 721>, + <&versaclock5 1>, + <&x302_clk>, + <&versaclock5 2>; + clock-names = "du.0", "du.1", "du.3", + "dclkin.0", "dclkin.1", "dclkin.3"; +}; + +&sdhi3 { + mmc-hs400-1_8v; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a774b1.dtsi b/arch/arm64/boot/dts/renesas/r8a774b1.dtsi new file mode 100644 index 000000000000..c40ea300968e --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a774b1.dtsi @@ -0,0 +1,2627 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the r8a774b1 SoC + * + * Copyright (C) 2019 Renesas Electronics Corp. + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/r8a774b1-cpg-mssr.h> +#include <dt-bindings/power/r8a774b1-sysc.h> + +/ { + compatible = "renesas,r8a774b1"; + #address-cells = <2>; + #size-cells = <2>; + + /* + * The external audio clocks are configured as 0 Hz fixed frequency + * clocks by default. + * Boards that provide audio clocks should override them. + */ + audio_clk_a: audio_clk_a { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + audio_clk_b: audio_clk_b { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + audio_clk_c: audio_clk_c { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + /* External CAN clock - to be overridden by boards that provide it */ + can_clk: can { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + cluster0_opp: opp_table0 { + compatible = "operating-points-v2"; + opp-shared; + + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + opp-microvolt = <830000>; + clock-latency-ns = <300000>; + }; + opp-1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <830000>; + clock-latency-ns = <300000>; + }; + opp-1500000000 { + opp-hz = /bits/ 64 <1500000000>; + opp-microvolt = <830000>; + clock-latency-ns = <300000>; + opp-suspend; + }; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + a57_0: cpu@0 { + compatible = "arm,cortex-a57"; + reg = <0x0>; + device_type = "cpu"; + power-domains = <&sysc R8A774B1_PD_CA57_CPU0>; + next-level-cache = <&L2_CA57>; + enable-method = "psci"; + #cooling-cells = <2>; + dynamic-power-coefficient = <854>; + clocks = <&cpg CPG_CORE R8A774B1_CLK_Z>; + operating-points-v2 = <&cluster0_opp>; + }; + + a57_1: cpu@1 { + compatible = "arm,cortex-a57"; + reg = <0x1>; + device_type = "cpu"; + power-domains = <&sysc R8A774B1_PD_CA57_CPU1>; + next-level-cache = <&L2_CA57>; + enable-method = "psci"; + clocks = <&cpg CPG_CORE R8A774B1_CLK_Z>; + operating-points-v2 = <&cluster0_opp>; + }; + + L2_CA57: cache-controller-0 { + compatible = "cache"; + power-domains = <&sysc R8A774B1_PD_CA57_SCU>; + cache-unified; + cache-level = <2>; + }; + }; + + extal_clk: extal { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board */ + clock-frequency = <0>; + }; + + extalr_clk: extalr { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board */ + clock-frequency = <0>; + }; + + /* External PCIe clock - can be overridden by the board */ + pcie_bus_clk: pcie_bus { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + pmu_a57 { + compatible = "arm,cortex-a57-pmu"; + interrupts-extended = <&gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&a57_0>, <&a57_1>; + }; + + psci { + compatible = "arm,psci-1.0", "arm,psci-0.2"; + method = "smc"; + }; + + /* External SCIF clock - to be overridden by boards that provide it */ + scif_clk: scif { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + soc { + compatible = "simple-bus"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + rwdt: watchdog@e6020000 { + compatible = "renesas,r8a774b1-wdt", + "renesas,rcar-gen3-wdt"; + reg = <0 0xe6020000 0 0x0c>; + clocks = <&cpg CPG_MOD 402>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 402>; + status = "disabled"; + }; + + gpio0: gpio@e6050000 { + compatible = "renesas,gpio-r8a774b1", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6050000 0 0x50>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 0 16>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 912>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 912>; + }; + + gpio1: gpio@e6051000 { + compatible = "renesas,gpio-r8a774b1", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6051000 0 0x50>; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 32 29>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 911>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 911>; + }; + + gpio2: gpio@e6052000 { + compatible = "renesas,gpio-r8a774b1", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6052000 0 0x50>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 64 15>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 910>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 910>; + }; + + gpio3: gpio@e6053000 { + compatible = "renesas,gpio-r8a774b1", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6053000 0 0x50>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 96 16>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 909>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 909>; + }; + + gpio4: gpio@e6054000 { + compatible = "renesas,gpio-r8a774b1", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6054000 0 0x50>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 128 18>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 908>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 908>; + }; + + gpio5: gpio@e6055000 { + compatible = "renesas,gpio-r8a774b1", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6055000 0 0x50>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 160 26>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 907>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 907>; + }; + + gpio6: gpio@e6055400 { + compatible = "renesas,gpio-r8a774b1", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6055400 0 0x50>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 192 32>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 906>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 906>; + }; + + gpio7: gpio@e6055800 { + compatible = "renesas,gpio-r8a774b1", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6055800 0 0x50>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 224 4>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 905>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 905>; + }; + + pfc: pin-controller@e6060000 { + compatible = "renesas,pfc-r8a774b1"; + reg = <0 0xe6060000 0 0x50c>; + }; + + cmt0: timer@e60f0000 { + compatible = "renesas,r8a774b1-cmt0", + "renesas,rcar-gen3-cmt0"; + reg = <0 0xe60f0000 0 0x1004>; + interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 303>; + clock-names = "fck"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 303>; + status = "disabled"; + }; + + cmt1: timer@e6130000 { + compatible = "renesas,r8a774b1-cmt1", + "renesas,rcar-gen3-cmt1"; + reg = <0 0xe6130000 0 0x1004>; + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 302>; + clock-names = "fck"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 302>; + status = "disabled"; + }; + + cmt2: timer@e6140000 { + compatible = "renesas,r8a774b1-cmt1", + "renesas,rcar-gen3-cmt1"; + reg = <0 0xe6140000 0 0x1004>; + interrupts = <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 301>; + clock-names = "fck"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 301>; + status = "disabled"; + }; + + cmt3: timer@e6148000 { + compatible = "renesas,r8a774b1-cmt1", + "renesas,rcar-gen3-cmt1"; + reg = <0 0xe6148000 0 0x1004>; + interrupts = <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 300>; + clock-names = "fck"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 300>; + status = "disabled"; + }; + + cpg: clock-controller@e6150000 { + compatible = "renesas,r8a774b1-cpg-mssr"; + reg = <0 0xe6150000 0 0x1000>; + clocks = <&extal_clk>, <&extalr_clk>; + clock-names = "extal", "extalr"; + #clock-cells = <2>; + #power-domain-cells = <0>; + #reset-cells = <1>; + }; + + rst: reset-controller@e6160000 { + compatible = "renesas,r8a774b1-rst"; + reg = <0 0xe6160000 0 0x0200>; + }; + + sysc: system-controller@e6180000 { + compatible = "renesas,r8a774b1-sysc"; + reg = <0 0xe6180000 0 0x0400>; + #power-domain-cells = <1>; + }; + + tsc: thermal@e6198000 { + compatible = "renesas,r8a774b1-thermal"; + reg = <0 0xe6198000 0 0x100>, + <0 0xe61a0000 0 0x100>, + <0 0xe61a8000 0 0x100>; + interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 522>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 522>; + #thermal-sensor-cells = <1>; + }; + + intc_ex: interrupt-controller@e61c0000 { + compatible = "renesas,intc-ex-r8a774b1", "renesas,irqc"; + #interrupt-cells = <2>; + interrupt-controller; + reg = <0 0xe61c0000 0 0x200>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 407>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 407>; + }; + + tmu0: timer@e61e0000 { + compatible = "renesas,tmu-r8a774b1", "renesas,tmu"; + reg = <0 0xe61e0000 0 0x30>; + interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 125>; + clock-names = "fck"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 125>; + status = "disabled"; + }; + + tmu1: timer@e6fc0000 { + compatible = "renesas,tmu-r8a774b1", "renesas,tmu"; + reg = <0 0xe6fc0000 0 0x30>; + interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 124>; + clock-names = "fck"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 124>; + status = "disabled"; + }; + + tmu2: timer@e6fd0000 { + compatible = "renesas,tmu-r8a774b1", "renesas,tmu"; + reg = <0 0xe6fd0000 0 0x30>; + interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 123>; + clock-names = "fck"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 123>; + status = "disabled"; + }; + + tmu3: timer@e6fe0000 { + compatible = "renesas,tmu-r8a774b1", "renesas,tmu"; + reg = <0 0xe6fe0000 0 0x30>; + interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 122>; + clock-names = "fck"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 122>; + status = "disabled"; + }; + + tmu4: timer@ffc00000 { + compatible = "renesas,tmu-r8a774b1", "renesas,tmu"; + reg = <0 0xffc00000 0 0x30>; + interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 121>; + clock-names = "fck"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 121>; + status = "disabled"; + }; + + i2c0: i2c@e6500000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a774b1", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe6500000 0 0x40>; + interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 931>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 931>; + dmas = <&dmac1 0x91>, <&dmac1 0x90>, + <&dmac2 0x91>, <&dmac2 0x90>; + dma-names = "tx", "rx", "tx", "rx"; + i2c-scl-internal-delay-ns = <110>; + status = "disabled"; + }; + + i2c1: i2c@e6508000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a774b1", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe6508000 0 0x40>; + interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 930>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 930>; + dmas = <&dmac1 0x93>, <&dmac1 0x92>, + <&dmac2 0x93>, <&dmac2 0x92>; + dma-names = "tx", "rx", "tx", "rx"; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + + i2c2: i2c@e6510000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a774b1", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe6510000 0 0x40>; + interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 929>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 929>; + dmas = <&dmac1 0x95>, <&dmac1 0x94>, + <&dmac2 0x95>, <&dmac2 0x94>; + dma-names = "tx", "rx", "tx", "rx"; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + + i2c3: i2c@e66d0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a774b1", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe66d0000 0 0x40>; + interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 928>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 928>; + dmas = <&dmac0 0x97>, <&dmac0 0x96>; + dma-names = "tx", "rx"; + i2c-scl-internal-delay-ns = <110>; + status = "disabled"; + }; + + i2c4: i2c@e66d8000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a774b1", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe66d8000 0 0x40>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 927>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 927>; + dmas = <&dmac0 0x99>, <&dmac0 0x98>; + dma-names = "tx", "rx"; + i2c-scl-internal-delay-ns = <110>; + status = "disabled"; + }; + + i2c5: i2c@e66e0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a774b1", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe66e0000 0 0x40>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 919>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 919>; + dmas = <&dmac0 0x9b>, <&dmac0 0x9a>; + dma-names = "tx", "rx"; + i2c-scl-internal-delay-ns = <110>; + status = "disabled"; + }; + + i2c6: i2c@e66e8000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a774b1", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe66e8000 0 0x40>; + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 918>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 918>; + dmas = <&dmac0 0x9d>, <&dmac0 0x9c>; + dma-names = "tx", "rx"; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + + i2c_dvfs: i2c@e60b0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,iic-r8a774b1", + "renesas,rcar-gen3-iic", + "renesas,rmobile-iic"; + reg = <0 0xe60b0000 0 0x425>; + interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 926>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 926>; + dmas = <&dmac0 0x11>, <&dmac0 0x10>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + hscif0: serial@e6540000 { + compatible = "renesas,hscif-r8a774b1", + "renesas,rcar-gen3-hscif", + "renesas,hscif"; + reg = <0 0xe6540000 0 0x60>; + interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 520>, + <&cpg CPG_CORE R8A774B1_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x31>, <&dmac1 0x30>, + <&dmac2 0x31>, <&dmac2 0x30>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 520>; + status = "disabled"; + }; + + hscif1: serial@e6550000 { + compatible = "renesas,hscif-r8a774b1", + "renesas,rcar-gen3-hscif", + "renesas,hscif"; + reg = <0 0xe6550000 0 0x60>; + interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 519>, + <&cpg CPG_CORE R8A774B1_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x33>, <&dmac1 0x32>, + <&dmac2 0x33>, <&dmac2 0x32>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 519>; + status = "disabled"; + }; + + hscif2: serial@e6560000 { + compatible = "renesas,hscif-r8a774b1", + "renesas,rcar-gen3-hscif", + "renesas,hscif"; + reg = <0 0xe6560000 0 0x60>; + interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 518>, + <&cpg CPG_CORE R8A774B1_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x35>, <&dmac1 0x34>, + <&dmac2 0x35>, <&dmac2 0x34>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 518>; + status = "disabled"; + }; + + hscif3: serial@e66a0000 { + compatible = "renesas,hscif-r8a774b1", + "renesas,rcar-gen3-hscif", + "renesas,hscif"; + reg = <0 0xe66a0000 0 0x60>; + interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 517>, + <&cpg CPG_CORE R8A774B1_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x37>, <&dmac0 0x36>; + dma-names = "tx", "rx"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 517>; + status = "disabled"; + }; + + hscif4: serial@e66b0000 { + compatible = "renesas,hscif-r8a774b1", + "renesas,rcar-gen3-hscif", + "renesas,hscif"; + reg = <0 0xe66b0000 0 0x60>; + interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 516>, + <&cpg CPG_CORE R8A774B1_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x39>, <&dmac0 0x38>; + dma-names = "tx", "rx"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 516>; + status = "disabled"; + }; + + hsusb: usb@e6590000 { + compatible = "renesas,usbhs-r8a774b1", + "renesas,rcar-gen3-usbhs"; + reg = <0 0xe6590000 0 0x200>; + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 704>, <&cpg CPG_MOD 703>; + dmas = <&usb_dmac0 0>, <&usb_dmac0 1>, + <&usb_dmac1 0>, <&usb_dmac1 1>; + dma-names = "ch0", "ch1", "ch2", "ch3"; + renesas,buswait = <11>; + phys = <&usb2_phy0 3>; + phy-names = "usb"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 704>, <&cpg 703>; + status = "disabled"; + }; + + usb_dmac0: dma-controller@e65a0000 { + compatible = "renesas,r8a774b1-usb-dmac", + "renesas,usb-dmac"; + reg = <0 0xe65a0000 0 0x100>; + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ch0", "ch1"; + clocks = <&cpg CPG_MOD 330>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 330>; + #dma-cells = <1>; + dma-channels = <2>; + }; + + usb_dmac1: dma-controller@e65b0000 { + compatible = "renesas,r8a774b1-usb-dmac", + "renesas,usb-dmac"; + reg = <0 0xe65b0000 0 0x100>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ch0", "ch1"; + clocks = <&cpg CPG_MOD 331>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 331>; + #dma-cells = <1>; + dma-channels = <2>; + }; + + usb3_phy0: usb-phy@e65ee000 { + compatible = "renesas,r8a774b1-usb3-phy", + "renesas,rcar-gen3-usb3-phy"; + reg = <0 0xe65ee000 0 0x90>; + clocks = <&cpg CPG_MOD 328>, <&usb3s0_clk>, + <&usb_extal_clk>; + clock-names = "usb3-if", "usb3s_clk", "usb_extal"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 328>; + #phy-cells = <0>; + status = "disabled"; + }; + + dmac0: dma-controller@e6700000 { + compatible = "renesas,dmac-r8a774b1", + "renesas,rcar-dmac"; + reg = <0 0xe6700000 0 0x10000>; + interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15"; + clocks = <&cpg CPG_MOD 219>; + clock-names = "fck"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 219>; + #dma-cells = <1>; + dma-channels = <16>; + iommus = <&ipmmu_ds0 0>, <&ipmmu_ds0 1>, + <&ipmmu_ds0 2>, <&ipmmu_ds0 3>, + <&ipmmu_ds0 4>, <&ipmmu_ds0 5>, + <&ipmmu_ds0 6>, <&ipmmu_ds0 7>, + <&ipmmu_ds0 8>, <&ipmmu_ds0 9>, + <&ipmmu_ds0 10>, <&ipmmu_ds0 11>, + <&ipmmu_ds0 12>, <&ipmmu_ds0 13>, + <&ipmmu_ds0 14>, <&ipmmu_ds0 15>; + }; + + dmac1: dma-controller@e7300000 { + compatible = "renesas,dmac-r8a774b1", + "renesas,rcar-dmac"; + reg = <0 0xe7300000 0 0x10000>; + interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15"; + clocks = <&cpg CPG_MOD 218>; + clock-names = "fck"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 218>; + #dma-cells = <1>; + dma-channels = <16>; + iommus = <&ipmmu_ds1 0>, <&ipmmu_ds1 1>, + <&ipmmu_ds1 2>, <&ipmmu_ds1 3>, + <&ipmmu_ds1 4>, <&ipmmu_ds1 5>, + <&ipmmu_ds1 6>, <&ipmmu_ds1 7>, + <&ipmmu_ds1 8>, <&ipmmu_ds1 9>, + <&ipmmu_ds1 10>, <&ipmmu_ds1 11>, + <&ipmmu_ds1 12>, <&ipmmu_ds1 13>, + <&ipmmu_ds1 14>, <&ipmmu_ds1 15>; + }; + + dmac2: dma-controller@e7310000 { + compatible = "renesas,dmac-r8a774b1", + "renesas,rcar-dmac"; + reg = <0 0xe7310000 0 0x10000>; + interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15"; + clocks = <&cpg CPG_MOD 217>; + clock-names = "fck"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 217>; + #dma-cells = <1>; + dma-channels = <16>; + iommus = <&ipmmu_ds1 16>, <&ipmmu_ds1 17>, + <&ipmmu_ds1 18>, <&ipmmu_ds1 19>, + <&ipmmu_ds1 20>, <&ipmmu_ds1 21>, + <&ipmmu_ds1 22>, <&ipmmu_ds1 23>, + <&ipmmu_ds1 24>, <&ipmmu_ds1 25>, + <&ipmmu_ds1 26>, <&ipmmu_ds1 27>, + <&ipmmu_ds1 28>, <&ipmmu_ds1 29>, + <&ipmmu_ds1 30>, <&ipmmu_ds1 31>; + }; + + ipmmu_ds0: mmu@e6740000 { + compatible = "renesas,ipmmu-r8a774b1"; + reg = <0 0xe6740000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 0>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_ds1: mmu@e7740000 { + compatible = "renesas,ipmmu-r8a774b1"; + reg = <0 0xe7740000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 1>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_hc: mmu@e6570000 { + compatible = "renesas,ipmmu-r8a774b1"; + reg = <0 0xe6570000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 2>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_mm: mmu@e67b0000 { + compatible = "renesas,ipmmu-r8a774b1"; + reg = <0 0xe67b0000 0 0x1000>; + interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_mp: mmu@ec670000 { + compatible = "renesas,ipmmu-r8a774b1"; + reg = <0 0xec670000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 4>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_pv0: mmu@fd800000 { + compatible = "renesas,ipmmu-r8a774b1"; + reg = <0 0xfd800000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 6>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_vc0: mmu@fe6b0000 { + compatible = "renesas,ipmmu-r8a774b1"; + reg = <0 0xfe6b0000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 12>; + power-domains = <&sysc R8A774B1_PD_A3VC>; + #iommu-cells = <1>; + }; + + ipmmu_vi0: mmu@febd0000 { + compatible = "renesas,ipmmu-r8a774b1"; + reg = <0 0xfebd0000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 14>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_vp0: mmu@fe990000 { + compatible = "renesas,ipmmu-r8a774b1"; + reg = <0 0xfe990000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 16>; + power-domains = <&sysc R8A774B1_PD_A3VP>; + #iommu-cells = <1>; + }; + + avb: ethernet@e6800000 { + compatible = "renesas,etheravb-r8a774b1", + "renesas,etheravb-rcar-gen3"; + reg = <0 0xe6800000 0 0x800>; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15", + "ch16", "ch17", "ch18", "ch19", + "ch20", "ch21", "ch22", "ch23", + "ch24"; + clocks = <&cpg CPG_MOD 812>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 812>; + phy-mode = "rgmii"; + iommus = <&ipmmu_ds0 16>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + can0: can@e6c30000 { + compatible = "renesas,can-r8a774b1", + "renesas,rcar-gen3-can"; + reg = <0 0xe6c30000 0 0x1000>; + interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 916>, + <&cpg CPG_CORE R8A774B1_CLK_CANFD>, + <&can_clk>; + clock-names = "clkp1", "clkp2", "can_clk"; + assigned-clocks = <&cpg CPG_CORE R8A774B1_CLK_CANFD>; + assigned-clock-rates = <40000000>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 916>; + status = "disabled"; + }; + + can1: can@e6c38000 { + compatible = "renesas,can-r8a774b1", + "renesas,rcar-gen3-can"; + reg = <0 0xe6c38000 0 0x1000>; + interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 915>, + <&cpg CPG_CORE R8A774B1_CLK_CANFD>, + <&can_clk>; + clock-names = "clkp1", "clkp2", "can_clk"; + assigned-clocks = <&cpg CPG_CORE R8A774B1_CLK_CANFD>; + assigned-clock-rates = <40000000>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 915>; + status = "disabled"; + }; + + canfd: can@e66c0000 { + compatible = "renesas,r8a774b1-canfd", + "renesas,rcar-gen3-canfd"; + reg = <0 0xe66c0000 0 0x8000>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 914>, + <&cpg CPG_CORE R8A774B1_CLK_CANFD>, + <&can_clk>; + clock-names = "fck", "canfd", "can_clk"; + assigned-clocks = <&cpg CPG_CORE R8A774B1_CLK_CANFD>; + assigned-clock-rates = <40000000>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 914>; + status = "disabled"; + + channel0 { + status = "disabled"; + }; + + channel1 { + status = "disabled"; + }; + }; + + pwm0: pwm@e6e30000 { + compatible = "renesas,pwm-r8a774b1", "renesas,pwm-rcar"; + reg = <0 0xe6e30000 0 0x8>; + #pwm-cells = <2>; + clocks = <&cpg CPG_MOD 523>; + resets = <&cpg 523>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + status = "disabled"; + }; + + pwm1: pwm@e6e31000 { + compatible = "renesas,pwm-r8a774b1", "renesas,pwm-rcar"; + reg = <0 0xe6e31000 0 0x8>; + #pwm-cells = <2>; + clocks = <&cpg CPG_MOD 523>; + resets = <&cpg 523>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + status = "disabled"; + }; + + pwm2: pwm@e6e32000 { + compatible = "renesas,pwm-r8a774b1", "renesas,pwm-rcar"; + reg = <0 0xe6e32000 0 0x8>; + #pwm-cells = <2>; + clocks = <&cpg CPG_MOD 523>; + resets = <&cpg 523>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + status = "disabled"; + }; + + pwm3: pwm@e6e33000 { + compatible = "renesas,pwm-r8a774b1", "renesas,pwm-rcar"; + reg = <0 0xe6e33000 0 0x8>; + #pwm-cells = <2>; + clocks = <&cpg CPG_MOD 523>; + resets = <&cpg 523>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + status = "disabled"; + }; + + pwm4: pwm@e6e34000 { + compatible = "renesas,pwm-r8a774b1", "renesas,pwm-rcar"; + reg = <0 0xe6e34000 0 0x8>; + #pwm-cells = <2>; + clocks = <&cpg CPG_MOD 523>; + resets = <&cpg 523>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + status = "disabled"; + }; + + pwm5: pwm@e6e35000 { + compatible = "renesas,pwm-r8a774b1", "renesas,pwm-rcar"; + reg = <0 0xe6e35000 0 0x8>; + #pwm-cells = <2>; + clocks = <&cpg CPG_MOD 523>; + resets = <&cpg 523>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + status = "disabled"; + }; + + pwm6: pwm@e6e36000 { + compatible = "renesas,pwm-r8a774b1", "renesas,pwm-rcar"; + reg = <0 0xe6e36000 0 0x8>; + #pwm-cells = <2>; + clocks = <&cpg CPG_MOD 523>; + resets = <&cpg 523>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + status = "disabled"; + }; + + scif0: serial@e6e60000 { + compatible = "renesas,scif-r8a774b1", + "renesas,rcar-gen3-scif", "renesas,scif"; + reg = <0 0xe6e60000 0 0x40>; + interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 207>, + <&cpg CPG_CORE R8A774B1_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x51>, <&dmac1 0x50>, + <&dmac2 0x51>, <&dmac2 0x50>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 207>; + status = "disabled"; + }; + + scif1: serial@e6e68000 { + compatible = "renesas,scif-r8a774b1", + "renesas,rcar-gen3-scif", "renesas,scif"; + reg = <0 0xe6e68000 0 0x40>; + interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 206>, + <&cpg CPG_CORE R8A774B1_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x53>, <&dmac1 0x52>, + <&dmac2 0x53>, <&dmac2 0x52>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 206>; + status = "disabled"; + }; + + scif2: serial@e6e88000 { + compatible = "renesas,scif-r8a774b1", + "renesas,rcar-gen3-scif", "renesas,scif"; + reg = <0 0xe6e88000 0 0x40>; + interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 310>, + <&cpg CPG_CORE R8A774B1_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x13>, <&dmac1 0x12>, + <&dmac2 0x13>, <&dmac2 0x12>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 310>; + status = "disabled"; + }; + + scif3: serial@e6c50000 { + compatible = "renesas,scif-r8a774b1", + "renesas,rcar-gen3-scif", "renesas,scif"; + reg = <0 0xe6c50000 0 0x40>; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 204>, + <&cpg CPG_CORE R8A774B1_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x57>, <&dmac0 0x56>; + dma-names = "tx", "rx"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 204>; + status = "disabled"; + }; + + scif4: serial@e6c40000 { + compatible = "renesas,scif-r8a774b1", + "renesas,rcar-gen3-scif", "renesas,scif"; + reg = <0 0xe6c40000 0 0x40>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 203>, + <&cpg CPG_CORE R8A774B1_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x59>, <&dmac0 0x58>; + dma-names = "tx", "rx"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 203>; + status = "disabled"; + }; + + scif5: serial@e6f30000 { + compatible = "renesas,scif-r8a774b1", + "renesas,rcar-gen3-scif", "renesas,scif"; + reg = <0 0xe6f30000 0 0x40>; + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 202>, + <&cpg CPG_CORE R8A774B1_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x5b>, <&dmac1 0x5a>, + <&dmac2 0x5b>, <&dmac2 0x5a>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 202>; + status = "disabled"; + }; + + msiof0: spi@e6e90000 { + compatible = "renesas,msiof-r8a774b1", + "renesas,rcar-gen3-msiof"; + reg = <0 0xe6e90000 0 0x0064>; + interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 211>; + dmas = <&dmac1 0x41>, <&dmac1 0x40>, + <&dmac2 0x41>, <&dmac2 0x40>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 211>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + msiof1: spi@e6ea0000 { + compatible = "renesas,msiof-r8a774b1", + "renesas,rcar-gen3-msiof"; + reg = <0 0xe6ea0000 0 0x0064>; + interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 210>; + dmas = <&dmac1 0x43>, <&dmac1 0x42>, + <&dmac2 0x43>, <&dmac2 0x42>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 210>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + msiof2: spi@e6c00000 { + compatible = "renesas,msiof-r8a774b1", + "renesas,rcar-gen3-msiof"; + reg = <0 0xe6c00000 0 0x0064>; + interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 209>; + dmas = <&dmac0 0x45>, <&dmac0 0x44>; + dma-names = "tx", "rx"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 209>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + msiof3: spi@e6c10000 { + compatible = "renesas,msiof-r8a774b1", + "renesas,rcar-gen3-msiof"; + reg = <0 0xe6c10000 0 0x0064>; + interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 208>; + dmas = <&dmac0 0x47>, <&dmac0 0x46>; + dma-names = "tx", "rx"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 208>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + vin0: video@e6ef0000 { + compatible = "renesas,vin-r8a774b1"; + reg = <0 0xe6ef0000 0 0x1000>; + interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 811>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 811>; + renesas,id = <0>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + vin0csi20: endpoint@0 { + reg = <0>; + remote-endpoint = <&csi20vin0>; + }; + vin0csi40: endpoint@2 { + reg = <2>; + remote-endpoint = <&csi40vin0>; + }; + }; + }; + }; + + vin1: video@e6ef1000 { + compatible = "renesas,vin-r8a774b1"; + reg = <0 0xe6ef1000 0 0x1000>; + interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 810>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 810>; + renesas,id = <1>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + vin1csi20: endpoint@0 { + reg = <0>; + remote-endpoint = <&csi20vin1>; + }; + vin1csi40: endpoint@2 { + reg = <2>; + remote-endpoint = <&csi40vin1>; + }; + }; + }; + }; + + vin2: video@e6ef2000 { + compatible = "renesas,vin-r8a774b1"; + reg = <0 0xe6ef2000 0 0x1000>; + interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 809>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 809>; + renesas,id = <2>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + vin2csi20: endpoint@0 { + reg = <0>; + remote-endpoint = <&csi20vin2>; + }; + vin2csi40: endpoint@2 { + reg = <2>; + remote-endpoint = <&csi40vin2>; + }; + }; + }; + }; + + vin3: video@e6ef3000 { + compatible = "renesas,vin-r8a774b1"; + reg = <0 0xe6ef3000 0 0x1000>; + interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 808>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 808>; + renesas,id = <3>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + vin3csi20: endpoint@0 { + reg = <0>; + remote-endpoint = <&csi20vin3>; + }; + vin3csi40: endpoint@2 { + reg = <2>; + remote-endpoint = <&csi40vin3>; + }; + }; + }; + }; + + vin4: video@e6ef4000 { + compatible = "renesas,vin-r8a774b1"; + reg = <0 0xe6ef4000 0 0x1000>; + interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 807>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 807>; + renesas,id = <4>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + vin4csi20: endpoint@0 { + reg = <0>; + remote-endpoint = <&csi20vin4>; + }; + vin4csi40: endpoint@2 { + reg = <2>; + remote-endpoint = <&csi40vin4>; + }; + }; + }; + }; + + vin5: video@e6ef5000 { + compatible = "renesas,vin-r8a774b1"; + reg = <0 0xe6ef5000 0 0x1000>; + interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 806>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 806>; + renesas,id = <5>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + vin5csi20: endpoint@0 { + reg = <0>; + remote-endpoint = <&csi20vin5>; + }; + vin5csi40: endpoint@2 { + reg = <2>; + remote-endpoint = <&csi40vin5>; + }; + }; + }; + }; + + vin6: video@e6ef6000 { + compatible = "renesas,vin-r8a774b1"; + reg = <0 0xe6ef6000 0 0x1000>; + interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 805>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 805>; + renesas,id = <6>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + vin6csi20: endpoint@0 { + reg = <0>; + remote-endpoint = <&csi20vin6>; + }; + vin6csi40: endpoint@2 { + reg = <2>; + remote-endpoint = <&csi40vin6>; + }; + }; + }; + }; + + vin7: video@e6ef7000 { + compatible = "renesas,vin-r8a774b1"; + reg = <0 0xe6ef7000 0 0x1000>; + interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 804>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 804>; + renesas,id = <7>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + vin7csi20: endpoint@0 { + reg = <0>; + remote-endpoint = <&csi20vin7>; + }; + vin7csi40: endpoint@2 { + reg = <2>; + remote-endpoint = <&csi40vin7>; + }; + }; + }; + }; + + rcar_sound: sound@ec500000 { + /* + * #sound-dai-cells is required + * + * Single DAI : #sound-dai-cells = <0>; <&rcar_sound>; + * Multi DAI : #sound-dai-cells = <1>; <&rcar_sound N>; + */ + /* + * #clock-cells is required for audio_clkout0/1/2/3 + * + * clkout : #clock-cells = <0>; <&rcar_sound>; + * clkout0/1/2/3: #clock-cells = <1>; <&rcar_sound N>; + */ + compatible = "renesas,rcar_sound-r8a774b1", "renesas,rcar_sound-gen3"; + reg = <0 0xec500000 0 0x1000>, /* SCU */ + <0 0xec5a0000 0 0x100>, /* ADG */ + <0 0xec540000 0 0x1000>, /* SSIU */ + <0 0xec541000 0 0x280>, /* SSI */ + <0 0xec760000 0 0x200>; /* Audio DMAC peri peri*/ + reg-names = "scu", "adg", "ssiu", "ssi", "audmapp"; + + clocks = <&cpg CPG_MOD 1005>, + <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>, + <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>, + <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>, + <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>, + <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>, + <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>, + <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>, + <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>, + <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>, + <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>, + <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, + <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, + <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>, + <&audio_clk_a>, <&audio_clk_b>, + <&audio_clk_c>, + <&cpg CPG_CORE R8A774B1_CLK_S0D4>; + clock-names = "ssi-all", + "ssi.9", "ssi.8", "ssi.7", "ssi.6", + "ssi.5", "ssi.4", "ssi.3", "ssi.2", + "ssi.1", "ssi.0", + "src.9", "src.8", "src.7", "src.6", + "src.5", "src.4", "src.3", "src.2", + "src.1", "src.0", + "mix.1", "mix.0", + "ctu.1", "ctu.0", + "dvc.0", "dvc.1", + "clk_a", "clk_b", "clk_c", "clk_i"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 1005>, + <&cpg 1006>, <&cpg 1007>, + <&cpg 1008>, <&cpg 1009>, + <&cpg 1010>, <&cpg 1011>, + <&cpg 1012>, <&cpg 1013>, + <&cpg 1014>, <&cpg 1015>; + reset-names = "ssi-all", + "ssi.9", "ssi.8", "ssi.7", "ssi.6", + "ssi.5", "ssi.4", "ssi.3", "ssi.2", + "ssi.1", "ssi.0"; + status = "disabled"; + + rcar_sound,ctu { + ctu00: ctu-0 { }; + ctu01: ctu-1 { }; + ctu02: ctu-2 { }; + ctu03: ctu-3 { }; + ctu10: ctu-4 { }; + ctu11: ctu-5 { }; + ctu12: ctu-6 { }; + ctu13: ctu-7 { }; + }; + + rcar_sound,dvc { + dvc0: dvc-0 { + dmas = <&audma1 0xbc>; + dma-names = "tx"; + }; + dvc1: dvc-1 { + dmas = <&audma1 0xbe>; + dma-names = "tx"; + }; + }; + + rcar_sound,mix { + mix0: mix-0 { }; + mix1: mix-1 { }; + }; + + rcar_sound,src { + src0: src-0 { + interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x85>, <&audma1 0x9a>; + dma-names = "rx", "tx"; + }; + src1: src-1 { + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x87>, <&audma1 0x9c>; + dma-names = "rx", "tx"; + }; + src2: src-2 { + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x89>, <&audma1 0x9e>; + dma-names = "rx", "tx"; + }; + src3: src-3 { + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x8b>, <&audma1 0xa0>; + dma-names = "rx", "tx"; + }; + src4: src-4 { + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x8d>, <&audma1 0xb0>; + dma-names = "rx", "tx"; + }; + src5: src-5 { + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x8f>, <&audma1 0xb2>; + dma-names = "rx", "tx"; + }; + src6: src-6 { + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x91>, <&audma1 0xb4>; + dma-names = "rx", "tx"; + }; + src7: src-7 { + interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x93>, <&audma1 0xb6>; + dma-names = "rx", "tx"; + }; + src8: src-8 { + interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x95>, <&audma1 0xb8>; + dma-names = "rx", "tx"; + }; + src9: src-9 { + interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x97>, <&audma1 0xba>; + dma-names = "rx", "tx"; + }; + }; + + rcar_sound,ssi { + ssi0: ssi-0 { + interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x01>, <&audma1 0x02>; + dma-names = "rx", "tx"; + }; + ssi1: ssi-1 { + interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x03>, <&audma1 0x04>; + dma-names = "rx", "tx"; + }; + ssi2: ssi-2 { + interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x05>, <&audma1 0x06>; + dma-names = "rx", "tx"; + }; + ssi3: ssi-3 { + interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x07>, <&audma1 0x08>; + dma-names = "rx", "tx"; + }; + ssi4: ssi-4 { + interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x09>, <&audma1 0x0a>; + dma-names = "rx", "tx"; + }; + ssi5: ssi-5 { + interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x0b>, <&audma1 0x0c>; + dma-names = "rx", "tx"; + }; + ssi6: ssi-6 { + interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x0d>, <&audma1 0x0e>; + dma-names = "rx", "tx"; + }; + ssi7: ssi-7 { + interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x0f>, <&audma1 0x10>; + dma-names = "rx", "tx"; + }; + ssi8: ssi-8 { + interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x11>, <&audma1 0x12>; + dma-names = "rx", "tx"; + }; + ssi9: ssi-9 { + interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x13>, <&audma1 0x14>; + dma-names = "rx", "tx"; + }; + }; + + rcar_sound,ssiu { + ssiu00: ssiu-0 { + dmas = <&audma0 0x15>, <&audma1 0x16>; + dma-names = "rx", "tx"; + }; + ssiu01: ssiu-1 { + dmas = <&audma0 0x35>, <&audma1 0x36>; + dma-names = "rx", "tx"; + }; + ssiu02: ssiu-2 { + dmas = <&audma0 0x37>, <&audma1 0x38>; + dma-names = "rx", "tx"; + }; + ssiu03: ssiu-3 { + dmas = <&audma0 0x47>, <&audma1 0x48>; + dma-names = "rx", "tx"; + }; + ssiu04: ssiu-4 { + dmas = <&audma0 0x3F>, <&audma1 0x40>; + dma-names = "rx", "tx"; + }; + ssiu05: ssiu-5 { + dmas = <&audma0 0x43>, <&audma1 0x44>; + dma-names = "rx", "tx"; + }; + ssiu06: ssiu-6 { + dmas = <&audma0 0x4F>, <&audma1 0x50>; + dma-names = "rx", "tx"; + }; + ssiu07: ssiu-7 { + dmas = <&audma0 0x53>, <&audma1 0x54>; + dma-names = "rx", "tx"; + }; + ssiu10: ssiu-8 { + dmas = <&audma0 0x49>, <&audma1 0x4a>; + dma-names = "rx", "tx"; + }; + ssiu11: ssiu-9 { + dmas = <&audma0 0x4B>, <&audma1 0x4C>; + dma-names = "rx", "tx"; + }; + ssiu12: ssiu-10 { + dmas = <&audma0 0x57>, <&audma1 0x58>; + dma-names = "rx", "tx"; + }; + ssiu13: ssiu-11 { + dmas = <&audma0 0x59>, <&audma1 0x5A>; + dma-names = "rx", "tx"; + }; + ssiu14: ssiu-12 { + dmas = <&audma0 0x5F>, <&audma1 0x60>; + dma-names = "rx", "tx"; + }; + ssiu15: ssiu-13 { + dmas = <&audma0 0xC3>, <&audma1 0xC4>; + dma-names = "rx", "tx"; + }; + ssiu16: ssiu-14 { + dmas = <&audma0 0xC7>, <&audma1 0xC8>; + dma-names = "rx", "tx"; + }; + ssiu17: ssiu-15 { + dmas = <&audma0 0xCB>, <&audma1 0xCC>; + dma-names = "rx", "tx"; + }; + ssiu20: ssiu-16 { + dmas = <&audma0 0x63>, <&audma1 0x64>; + dma-names = "rx", "tx"; + }; + ssiu21: ssiu-17 { + dmas = <&audma0 0x67>, <&audma1 0x68>; + dma-names = "rx", "tx"; + }; + ssiu22: ssiu-18 { + dmas = <&audma0 0x6B>, <&audma1 0x6C>; + dma-names = "rx", "tx"; + }; + ssiu23: ssiu-19 { + dmas = <&audma0 0x6D>, <&audma1 0x6E>; + dma-names = "rx", "tx"; + }; + ssiu24: ssiu-20 { + dmas = <&audma0 0xCF>, <&audma1 0xCE>; + dma-names = "rx", "tx"; + }; + ssiu25: ssiu-21 { + dmas = <&audma0 0xEB>, <&audma1 0xEC>; + dma-names = "rx", "tx"; + }; + ssiu26: ssiu-22 { + dmas = <&audma0 0xED>, <&audma1 0xEE>; + dma-names = "rx", "tx"; + }; + ssiu27: ssiu-23 { + dmas = <&audma0 0xEF>, <&audma1 0xF0>; + dma-names = "rx", "tx"; + }; + ssiu30: ssiu-24 { + dmas = <&audma0 0x6f>, <&audma1 0x70>; + dma-names = "rx", "tx"; + }; + ssiu31: ssiu-25 { + dmas = <&audma0 0x21>, <&audma1 0x22>; + dma-names = "rx", "tx"; + }; + ssiu32: ssiu-26 { + dmas = <&audma0 0x23>, <&audma1 0x24>; + dma-names = "rx", "tx"; + }; + ssiu33: ssiu-27 { + dmas = <&audma0 0x25>, <&audma1 0x26>; + dma-names = "rx", "tx"; + }; + ssiu34: ssiu-28 { + dmas = <&audma0 0x27>, <&audma1 0x28>; + dma-names = "rx", "tx"; + }; + ssiu35: ssiu-29 { + dmas = <&audma0 0x29>, <&audma1 0x2A>; + dma-names = "rx", "tx"; + }; + ssiu36: ssiu-30 { + dmas = <&audma0 0x2B>, <&audma1 0x2C>; + dma-names = "rx", "tx"; + }; + ssiu37: ssiu-31 { + dmas = <&audma0 0x2D>, <&audma1 0x2E>; + dma-names = "rx", "tx"; + }; + ssiu40: ssiu-32 { + dmas = <&audma0 0x71>, <&audma1 0x72>; + dma-names = "rx", "tx"; + }; + ssiu41: ssiu-33 { + dmas = <&audma0 0x17>, <&audma1 0x18>; + dma-names = "rx", "tx"; + }; + ssiu42: ssiu-34 { + dmas = <&audma0 0x19>, <&audma1 0x1A>; + dma-names = "rx", "tx"; + }; + ssiu43: ssiu-35 { + dmas = <&audma0 0x1B>, <&audma1 0x1C>; + dma-names = "rx", "tx"; + }; + ssiu44: ssiu-36 { + dmas = <&audma0 0x1D>, <&audma1 0x1E>; + dma-names = "rx", "tx"; + }; + ssiu45: ssiu-37 { + dmas = <&audma0 0x1F>, <&audma1 0x20>; + dma-names = "rx", "tx"; + }; + ssiu46: ssiu-38 { + dmas = <&audma0 0x31>, <&audma1 0x32>; + dma-names = "rx", "tx"; + }; + ssiu47: ssiu-39 { + dmas = <&audma0 0x33>, <&audma1 0x34>; + dma-names = "rx", "tx"; + }; + ssiu50: ssiu-40 { + dmas = <&audma0 0x73>, <&audma1 0x74>; + dma-names = "rx", "tx"; + }; + ssiu60: ssiu-41 { + dmas = <&audma0 0x75>, <&audma1 0x76>; + dma-names = "rx", "tx"; + }; + ssiu70: ssiu-42 { + dmas = <&audma0 0x79>, <&audma1 0x7a>; + dma-names = "rx", "tx"; + }; + ssiu80: ssiu-43 { + dmas = <&audma0 0x7b>, <&audma1 0x7c>; + dma-names = "rx", "tx"; + }; + ssiu90: ssiu-44 { + dmas = <&audma0 0x7d>, <&audma1 0x7e>; + dma-names = "rx", "tx"; + }; + ssiu91: ssiu-45 { + dmas = <&audma0 0x7F>, <&audma1 0x80>; + dma-names = "rx", "tx"; + }; + ssiu92: ssiu-46 { + dmas = <&audma0 0x81>, <&audma1 0x82>; + dma-names = "rx", "tx"; + }; + ssiu93: ssiu-47 { + dmas = <&audma0 0x83>, <&audma1 0x84>; + dma-names = "rx", "tx"; + }; + ssiu94: ssiu-48 { + dmas = <&audma0 0xA3>, <&audma1 0xA4>; + dma-names = "rx", "tx"; + }; + ssiu95: ssiu-49 { + dmas = <&audma0 0xA5>, <&audma1 0xA6>; + dma-names = "rx", "tx"; + }; + ssiu96: ssiu-50 { + dmas = <&audma0 0xA7>, <&audma1 0xA8>; + dma-names = "rx", "tx"; + }; + ssiu97: ssiu-51 { + dmas = <&audma0 0xA9>, <&audma1 0xAA>; + dma-names = "rx", "tx"; + }; + }; + }; + + audma0: dma-controller@ec700000 { + compatible = "renesas,dmac-r8a774b1", + "renesas,rcar-dmac"; + reg = <0 0xec700000 0 0x10000>; + interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15"; + clocks = <&cpg CPG_MOD 502>; + clock-names = "fck"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 502>; + #dma-cells = <1>; + dma-channels = <16>; + }; + + audma1: dma-controller@ec720000 { + compatible = "renesas,dmac-r8a774b1", + "renesas,rcar-dmac"; + reg = <0 0xec720000 0 0x10000>; + interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15"; + clocks = <&cpg CPG_MOD 501>; + clock-names = "fck"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 501>; + #dma-cells = <1>; + dma-channels = <16>; + }; + + xhci0: usb@ee000000 { + compatible = "renesas,xhci-r8a774b1", + "renesas,rcar-gen3-xhci"; + reg = <0 0xee000000 0 0xc00>; + interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 328>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 328>; + status = "disabled"; + }; + + usb3_peri0: usb@ee020000 { + compatible = "renesas,r8a774b1-usb3-peri", + "renesas,rcar-gen3-usb3-peri"; + reg = <0 0xee020000 0 0x400>; + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 328>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 328>; + status = "disabled"; + }; + + ohci0: usb@ee080000 { + compatible = "generic-ohci"; + reg = <0 0xee080000 0 0x100>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; + phys = <&usb2_phy0 1>; + phy-names = "usb"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 703>, <&cpg 704>; + status = "disabled"; + }; + + ohci1: usb@ee0a0000 { + compatible = "generic-ohci"; + reg = <0 0xee0a0000 0 0x100>; + interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 702>; + phys = <&usb2_phy1 1>; + phy-names = "usb"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 702>; + status = "disabled"; + }; + + ehci0: usb@ee080100 { + compatible = "generic-ehci"; + reg = <0 0xee080100 0 0x100>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; + phys = <&usb2_phy0 2>; + phy-names = "usb"; + companion = <&ohci0>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 703>, <&cpg 704>; + status = "disabled"; + }; + + ehci1: usb@ee0a0100 { + compatible = "generic-ehci"; + reg = <0 0xee0a0100 0 0x100>; + interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 702>; + phys = <&usb2_phy1 2>; + phy-names = "usb"; + companion = <&ohci1>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 702>; + status = "disabled"; + }; + + usb2_phy0: usb-phy@ee080200 { + compatible = "renesas,usb2-phy-r8a774b1", + "renesas,rcar-gen3-usb2-phy"; + reg = <0 0xee080200 0 0x700>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 703>, <&cpg 704>; + #phy-cells = <1>; + status = "disabled"; + }; + + usb2_phy1: usb-phy@ee0a0200 { + compatible = "renesas,usb2-phy-r8a774b1", + "renesas,rcar-gen3-usb2-phy"; + reg = <0 0xee0a0200 0 0x700>; + clocks = <&cpg CPG_MOD 702>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 702>; + #phy-cells = <1>; + status = "disabled"; + }; + + sdhi0: sd@ee100000 { + compatible = "renesas,sdhi-r8a774b1", + "renesas,rcar-gen3-sdhi"; + reg = <0 0xee100000 0 0x2000>; + interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 314>; + max-frequency = <200000000>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 314>; + status = "disabled"; + }; + + sdhi1: sd@ee120000 { + compatible = "renesas,sdhi-r8a774b1", + "renesas,rcar-gen3-sdhi"; + reg = <0 0xee120000 0 0x2000>; + interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 313>; + max-frequency = <200000000>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 313>; + status = "disabled"; + }; + + sdhi2: sd@ee140000 { + compatible = "renesas,sdhi-r8a774b1", + "renesas,rcar-gen3-sdhi"; + reg = <0 0xee140000 0 0x2000>; + interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 312>; + max-frequency = <200000000>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 312>; + status = "disabled"; + }; + + sdhi3: sd@ee160000 { + compatible = "renesas,sdhi-r8a774b1", + "renesas,rcar-gen3-sdhi"; + reg = <0 0xee160000 0 0x2000>; + interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 311>; + max-frequency = <200000000>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 311>; + status = "disabled"; + }; + + sata: sata@ee300000 { + compatible = "renesas,sata-r8a774b1", + "renesas,rcar-gen3-sata"; + reg = <0 0xee300000 0 0x200000>; + interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 815>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 815>; + status = "disabled"; + }; + + gic: interrupt-controller@f1010000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0x0 0xf1010000 0 0x1000>, + <0x0 0xf1020000 0 0x20000>, + <0x0 0xf1040000 0 0x20000>, + <0x0 0xf1060000 0 0x20000>; + interrupts = <GIC_PPI 9 + (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; + clocks = <&cpg CPG_MOD 408>; + clock-names = "clk"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 408>; + }; + + pciec0: pcie@fe000000 { + compatible = "renesas,pcie-r8a774b1", + "renesas,pcie-rcar-gen3"; + reg = <0 0xfe000000 0 0x80000>; + #address-cells = <3>; + #size-cells = <2>; + bus-range = <0x00 0xff>; + device_type = "pci"; + ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000>, + <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>, + <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>, + <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>; + /* Map all possible DDR as inbound ranges */ + dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>; + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>; + clock-names = "pcie", "pcie_bus"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 319>; + status = "disabled"; + }; + + pciec1: pcie@ee800000 { + compatible = "renesas,pcie-r8a774b1", + "renesas,pcie-rcar-gen3"; + reg = <0 0xee800000 0 0x80000>; + #address-cells = <3>; + #size-cells = <2>; + bus-range = <0x00 0xff>; + device_type = "pci"; + ranges = <0x01000000 0 0x00000000 0 0xee900000 0 0x00100000>, + <0x02000000 0 0xeea00000 0 0xeea00000 0 0x00200000>, + <0x02000000 0 0xc0000000 0 0xc0000000 0 0x08000000>, + <0x42000000 0 0xc8000000 0 0xc8000000 0 0x08000000>; + /* Map all possible DDR as inbound ranges */ + dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>; + interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 318>, <&pcie_bus_clk>; + clock-names = "pcie", "pcie_bus"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 318>; + status = "disabled"; + }; + + fdp1@fe940000 { + compatible = "renesas,fdp1"; + reg = <0 0xfe940000 0 0x2400>; + interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 119>; + power-domains = <&sysc R8A774B1_PD_A3VP>; + resets = <&cpg 119>; + renesas,fcp = <&fcpf0>; + }; + + fcpf0: fcp@fe950000 { + compatible = "renesas,fcpf"; + reg = <0 0xfe950000 0 0x200>; + clocks = <&cpg CPG_MOD 615>; + power-domains = <&sysc R8A774B1_PD_A3VP>; + resets = <&cpg 615>; + }; + + vspb: vsp@fe960000 { + compatible = "renesas,vsp2"; + reg = <0 0xfe960000 0 0x8000>; + interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 626>; + power-domains = <&sysc R8A774B1_PD_A3VP>; + resets = <&cpg 626>; + + renesas,fcp = <&fcpvb0>; + }; + + vspi0: vsp@fe9a0000 { + compatible = "renesas,vsp2"; + reg = <0 0xfe9a0000 0 0x8000>; + interrupts = <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 631>; + power-domains = <&sysc R8A774B1_PD_A3VP>; + resets = <&cpg 631>; + + renesas,fcp = <&fcpvi0>; + }; + + vspd0: vsp@fea20000 { + compatible = "renesas,vsp2"; + reg = <0 0xfea20000 0 0x5000>; + interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 623>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 623>; + + renesas,fcp = <&fcpvd0>; + }; + + vspd1: vsp@fea28000 { + compatible = "renesas,vsp2"; + reg = <0 0xfea28000 0 0x5000>; + interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 622>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 622>; + + renesas,fcp = <&fcpvd1>; + }; + + fcpvb0: fcp@fe96f000 { + compatible = "renesas,fcpv"; + reg = <0 0xfe96f000 0 0x200>; + clocks = <&cpg CPG_MOD 607>; + power-domains = <&sysc R8A774B1_PD_A3VP>; + resets = <&cpg 607>; + }; + + fcpvd0: fcp@fea27000 { + compatible = "renesas,fcpv"; + reg = <0 0xfea27000 0 0x200>; + clocks = <&cpg CPG_MOD 603>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 603>; + }; + + fcpvd1: fcp@fea2f000 { + compatible = "renesas,fcpv"; + reg = <0 0xfea2f000 0 0x200>; + clocks = <&cpg CPG_MOD 602>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 602>; + }; + + fcpvi0: fcp@fe9af000 { + compatible = "renesas,fcpv"; + reg = <0 0xfe9af000 0 0x200>; + clocks = <&cpg CPG_MOD 611>; + power-domains = <&sysc R8A774B1_PD_A3VP>; + resets = <&cpg 611>; + }; + + csi20: csi2@fea80000 { + compatible = "renesas,r8a774b1-csi2"; + reg = <0 0xfea80000 0 0x10000>; + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 714>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 714>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + csi20vin0: endpoint@0 { + reg = <0>; + remote-endpoint = <&vin0csi20>; + }; + csi20vin1: endpoint@1 { + reg = <1>; + remote-endpoint = <&vin1csi20>; + }; + csi20vin2: endpoint@2 { + reg = <2>; + remote-endpoint = <&vin2csi20>; + }; + csi20vin3: endpoint@3 { + reg = <3>; + remote-endpoint = <&vin3csi20>; + }; + csi20vin4: endpoint@4 { + reg = <4>; + remote-endpoint = <&vin4csi20>; + }; + csi20vin5: endpoint@5 { + reg = <5>; + remote-endpoint = <&vin5csi20>; + }; + csi20vin6: endpoint@6 { + reg = <6>; + remote-endpoint = <&vin6csi20>; + }; + csi20vin7: endpoint@7 { + reg = <7>; + remote-endpoint = <&vin7csi20>; + }; + }; + }; + }; + + csi40: csi2@feaa0000 { + compatible = "renesas,r8a774b1-csi2"; + reg = <0 0xfeaa0000 0 0x10000>; + interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 716>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 716>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + csi40vin0: endpoint@0 { + reg = <0>; + remote-endpoint = <&vin0csi40>; + }; + csi40vin1: endpoint@1 { + reg = <1>; + remote-endpoint = <&vin1csi40>; + }; + csi40vin2: endpoint@2 { + reg = <2>; + remote-endpoint = <&vin2csi40>; + }; + csi40vin3: endpoint@3 { + reg = <3>; + remote-endpoint = <&vin3csi40>; + }; + csi40vin4: endpoint@4 { + reg = <4>; + remote-endpoint = <&vin4csi40>; + }; + csi40vin5: endpoint@5 { + reg = <5>; + remote-endpoint = <&vin5csi40>; + }; + csi40vin6: endpoint@6 { + reg = <6>; + remote-endpoint = <&vin6csi40>; + }; + csi40vin7: endpoint@7 { + reg = <7>; + remote-endpoint = <&vin7csi40>; + }; + }; + }; + }; + + hdmi0: hdmi@fead0000 { + compatible = "renesas,r8a774b1-hdmi", + "renesas,rcar-gen3-hdmi"; + reg = <0 0xfead0000 0 0x10000>; + interrupts = <GIC_SPI 389 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 729>, + <&cpg CPG_CORE R8A774B1_CLK_HDMI>; + clock-names = "iahb", "isfr"; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 729>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dw_hdmi0_in: endpoint { + remote-endpoint = <&du_out_hdmi0>; + }; + }; + port@1 { + reg = <1>; + }; + port@2 { + /* HDMI sound */ + reg = <2>; + }; + }; + }; + + du: display@feb00000 { + compatible = "renesas,du-r8a774b1"; + reg = <0 0xfeb00000 0 0x80000>; + interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 724>, + <&cpg CPG_MOD 723>, + <&cpg CPG_MOD 721>; + clock-names = "du.0", "du.1", "du.3"; + status = "disabled"; + + vsps = <&vspd0 0>, <&vspd1 0>, <&vspd0 1>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + du_out_rgb: endpoint { + }; + }; + port@1 { + reg = <1>; + du_out_hdmi0: endpoint { + remote-endpoint = <&dw_hdmi0_in>; + }; + }; + port@2 { + reg = <2>; + du_out_lvds0: endpoint { + remote-endpoint = <&lvds0_in>; + }; + }; + }; + }; + + lvds0: lvds@feb90000 { + compatible = "renesas,r8a774b1-lvds"; + reg = <0 0xfeb90000 0 0x14>; + clocks = <&cpg CPG_MOD 727>; + power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>; + resets = <&cpg 727>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + lvds0_in: endpoint { + remote-endpoint = <&du_out_lvds0>; + }; + }; + port@1 { + reg = <1>; + lvds0_out: endpoint { + }; + }; + }; + }; + + prr: chipid@fff00044 { + compatible = "renesas,prr"; + reg = <0 0xfff00044 0 4>; + }; + }; + + thermal-zones { + sensor_thermal1: sensor-thermal1 { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsc 0>; + sustainable-power = <2439>; + + trips { + sensor1_crit: sensor1-crit { + temperature = <120000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + sensor_thermal2: sensor-thermal2 { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsc 1>; + sustainable-power = <2439>; + + trips { + sensor2_crit: sensor2-crit { + temperature = <120000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + sensor_thermal3: sensor-thermal3 { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsc 2>; + sustainable-power = <2439>; + + cooling-maps { + map0 { + trip = <&target>; + cooling-device = <&a57_0 0 2>; + contribution = <1024>; + }; + }; + trips { + target: trip-point1 { + temperature = <100000>; + hysteresis = <1000>; + type = "passive"; + }; + + sensor3_crit: sensor3-crit { + temperature = <120000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; + }; + + /* External USB clocks - can be overridden by the board */ + usb3s0_clk: usb3s0 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + usb_extal_clk: usb_extal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts b/arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts index 46a77eefa536..26aee004a44e 100644 --- a/arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts +++ b/arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts @@ -65,6 +65,15 @@ reg = <0x0 0x48000000 0x0 0x78000000>; }; + reg_12p0v: regulator-12p0v { + compatible = "regulator-fixed"; + regulator-name = "D12.0V"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-boot-on; + regulator-always-on; + }; + sound: sound { compatible = "simple-audio-card"; @@ -73,13 +82,13 @@ simple-audio-card,bitclock-master = <&sndcpu>; simple-audio-card,frame-master = <&sndcpu>; - sndcpu: simple-audio-card,cpu { - sound-dai = <&rcar_sound>; - }; - sndcodec: simple-audio-card,codec { sound-dai = <&tda19988>; }; + + sndcpu: simple-audio-card,cpu { + sound-dai = <&rcar_sound>; + }; }; vcc_sdhi0: regulator-vcc-sdhi0 { @@ -101,8 +110,7 @@ gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>; gpios-states = <1>; - states = <3300000 1 - 1800000 0>; + states = <3300000 1>, <1800000 0>; }; wlan_en_reg: fixedregulator { @@ -271,16 +279,16 @@ function = "du"; }; - i2c1_pins: i2c1 { - groups = "i2c1_b"; - function = "i2c1"; - }; - hscif2_pins: hscif2 { groups = "hscif2_data_a", "hscif2_ctrl_a"; function = "hscif2"; }; + i2c1_pins: i2c1 { + groups = "i2c1_b"; + function = "i2c1"; + }; + scif2_pins: scif2 { groups = "scif2_data_a"; function = "scif2"; @@ -304,16 +312,16 @@ power-source = <1800>; }; - sound_pins: sound { - groups = "ssi01239_ctrl", "ssi0_data"; - function = "ssi"; - }; - sound_clk_pins: sound_clk { groups = "audio_clkout1_a"; function = "audio_clk"; }; + sound_pins: sound { + groups = "ssi01239_ctrl", "ssi0_data"; + function = "ssi"; + }; + usb30_pins: usb30 { groups = "usb30", "usb30_id"; function = "usb30"; diff --git a/arch/arm64/boot/dts/renesas/r8a774c0-ek874-idk-2121wr.dts b/arch/arm64/boot/dts/renesas/r8a774c0-ek874-idk-2121wr.dts new file mode 100644 index 000000000000..a7b27d09f6c2 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a774c0-ek874-idk-2121wr.dts @@ -0,0 +1,116 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the Silicon Linux RZ/G2E evaluation kit (EK874), + * connected to an Advantech IDK-2121WR 21.5" LVDS panel + * + * Copyright (C) 2019 Renesas Electronics Corp. + */ + +#include "r8a774c0-ek874.dts" + +/ { + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm5 0 50000>; + + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + + power-supply = <®_12p0v>; + enable-gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>; + }; + + panel-lvds { + compatible = "advantech,idk-2121wr", "panel-lvds"; + + width-mm = <476>; + height-mm = <268>; + + data-mapping = "vesa-24"; + + panel-timing { + clock-frequency = <148500000>; + hactive = <1920>; + vactive = <1080>; + hsync-len = <44>; + hfront-porch = <88>; + hback-porch = <148>; + vfront-porch = <4>; + vback-porch = <36>; + vsync-len = <5>; + }; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dual-lvds-odd-pixels; + panel_in0: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + + port@1 { + reg = <1>; + dual-lvds-even-pixels; + panel_in1: endpoint { + remote-endpoint = <&lvds1_out>; + }; + }; + }; + }; +}; + +&gpio0 { + /* + * When GP0_17 is low LVDS[01] are connected to the LVDS connector + * When GP0_17 is high LVDS[01] are connected to the LT8918L + */ + lvds-connector-en-gpio{ + gpio-hog; + gpios = <17 GPIO_ACTIVE_HIGH>; + output-low; + line-name = "lvds-connector-en-gpio"; + }; +}; + +&lvds0 { + ports { + port@1 { + lvds0_out: endpoint { + remote-endpoint = <&panel_in0>; + }; + }; + }; +}; + +&lvds1 { + status = "okay"; + + clocks = <&cpg CPG_MOD 727>, <&x13_clk>, <&extal_clk>; + clock-names = "fck", "dclkin.0", "extal"; + + ports { + port@1 { + lvds1_out: endpoint { + remote-endpoint = <&panel_in1>; + }; + }; + }; +}; + +&pfc { + pwm5_pins: pwm5 { + groups = "pwm5_a"; + function = "pwm5"; + }; +}; + +&pwm5 { + pinctrl-0 = <&pwm5_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi index e7b5bf23f978..a53cd5fcc401 100644 --- a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi @@ -73,9 +73,11 @@ compatible = "arm,cortex-a53"; reg = <0>; device_type = "cpu"; + #cooling-cells = <2>; power-domains = <&sysc R8A774C0_PD_CA53_CPU0>; next-level-cache = <&L2_CA53>; enable-method = "psci"; + dynamic-power-coefficient = <277>; clocks = <&cpg CPG_CORE R8A774C0_CLK_Z2>; operating-points-v2 = <&cluster1_opp>; }; @@ -367,12 +369,12 @@ #interrupt-cells = <2>; interrupt-controller; reg = <0 0xe61c0000 0 0x200>; - interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 407>; power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; resets = <&cpg 407>; @@ -695,8 +697,8 @@ compatible = "renesas,r8a774c0-usb-dmac", "renesas,usb-dmac"; reg = <0 0xe65a0000 0 0x100>; - interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "ch0", "ch1"; clocks = <&cpg CPG_MOD 330>; power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; @@ -709,8 +711,8 @@ compatible = "renesas,r8a774c0-usb-dmac", "renesas,usb-dmac"; reg = <0 0xe65b0000 0 0x100>; - interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "ch0", "ch1"; clocks = <&cpg CPG_MOD 331>; power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; @@ -723,23 +725,23 @@ compatible = "renesas,dmac-r8a774c0", "renesas,rcar-dmac"; reg = <0 0xe6700000 0 0x10000>; - interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", @@ -765,23 +767,23 @@ compatible = "renesas,dmac-r8a774c0", "renesas,rcar-dmac"; reg = <0 0xe7300000 0 0x10000>; - interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", @@ -807,23 +809,23 @@ compatible = "renesas,dmac-r8a774c0", "renesas,rcar-dmac"; reg = <0 0xe7310000 0 0x10000>; - interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", @@ -973,6 +975,8 @@ <&cpg CPG_CORE R8A774C0_CLK_CANFD>, <&can_clk>; clock-names = "clkp1", "clkp2", "can_clk"; + assigned-clocks = <&cpg CPG_CORE R8A774C0_CLK_CANFD>; + assigned-clock-rates = <40000000>; power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; resets = <&cpg 916>; status = "disabled"; @@ -987,6 +991,8 @@ <&cpg CPG_CORE R8A774C0_CLK_CANFD>, <&can_clk>; clock-names = "clkp1", "clkp2", "can_clk"; + assigned-clocks = <&cpg CPG_CORE R8A774C0_CLK_CANFD>; + assigned-clock-rates = <40000000>; power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; resets = <&cpg 915>; status = "disabled"; @@ -1367,6 +1373,17 @@ "ssi.1", "ssi.0"; status = "disabled"; + rcar_sound,ctu { + ctu00: ctu-0 { }; + ctu01: ctu-1 { }; + ctu02: ctu-2 { }; + ctu03: ctu-3 { }; + ctu10: ctu-4 { }; + ctu11: ctu-5 { }; + ctu12: ctu-6 { }; + ctu13: ctu-7 { }; + }; + rcar_sound,dvc { dvc0: dvc-0 { dmas = <&audma0 0xbc>; @@ -1383,17 +1400,6 @@ mix1: mix-1 { }; }; - rcar_sound,ctu { - ctu00: ctu-0 { }; - ctu01: ctu-1 { }; - ctu02: ctu-2 { }; - ctu03: ctu-3 { }; - ctu10: ctu-4 { }; - ctu11: ctu-5 { }; - ctu12: ctu-6 { }; - ctu13: ctu-7 { }; - }; - rcar_sound,src { src0: src-0 { interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>; @@ -1515,23 +1521,23 @@ compatible = "renesas,dmac-r8a774c0", "renesas,rcar-dmac"; reg = <0 0xec700000 0 0x10000>; - interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", @@ -1673,10 +1679,10 @@ #size-cells = <2>; bus-range = <0x00 0xff>; device_type = "pci"; - ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000 - 0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000 - 0x02000000 0 0x30000000 0 0x30000000 0 0x08000000 - 0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>; + ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000>, + <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>, + <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>, + <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>; /* Map all possible DDR as inbound ranges */ dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x40000000>; interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, @@ -1702,13 +1708,24 @@ renesas,fcp = <&fcpvb0>; }; - fcpvb0: fcp@fe96f000 { - compatible = "renesas,fcpv"; - reg = <0 0xfe96f000 0 0x200>; - clocks = <&cpg CPG_MOD 607>; + vspd0: vsp@fea20000 { + compatible = "renesas,vsp2"; + reg = <0 0xfea20000 0 0x7000>; + interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 623>; power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; - resets = <&cpg 607>; - iommus = <&ipmmu_vp0 5>; + resets = <&cpg 623>; + renesas,fcp = <&fcpvd0>; + }; + + vspd1: vsp@fea28000 { + compatible = "renesas,vsp2"; + reg = <0 0xfea28000 0 0x7000>; + interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 622>; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 622>; + renesas,fcp = <&fcpvd1>; }; vspi0: vsp@fe9a0000 { @@ -1721,23 +1738,13 @@ renesas,fcp = <&fcpvi0>; }; - fcpvi0: fcp@fe9af000 { + fcpvb0: fcp@fe96f000 { compatible = "renesas,fcpv"; - reg = <0 0xfe9af000 0 0x200>; - clocks = <&cpg CPG_MOD 611>; - power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; - resets = <&cpg 611>; - iommus = <&ipmmu_vp0 8>; - }; - - vspd0: vsp@fea20000 { - compatible = "renesas,vsp2"; - reg = <0 0xfea20000 0 0x7000>; - interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 623>; + reg = <0 0xfe96f000 0 0x200>; + clocks = <&cpg CPG_MOD 607>; power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; - resets = <&cpg 623>; - renesas,fcp = <&fcpvd0>; + resets = <&cpg 607>; + iommus = <&ipmmu_vp0 5>; }; fcpvd0: fcp@fea27000 { @@ -1749,16 +1756,6 @@ iommus = <&ipmmu_vi0 8>; }; - vspd1: vsp@fea28000 { - compatible = "renesas,vsp2"; - reg = <0 0xfea28000 0 0x7000>; - interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 622>; - power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; - resets = <&cpg 622>; - renesas,fcp = <&fcpvd1>; - }; - fcpvd1: fcp@fea2f000 { compatible = "renesas,fcpv"; reg = <0 0xfea2f000 0 0x200>; @@ -1768,6 +1765,15 @@ iommus = <&ipmmu_vi0 9>; }; + fcpvi0: fcp@fe9af000 { + compatible = "renesas,fcpv"; + reg = <0 0xfe9af000 0 0x200>; + clocks = <&cpg CPG_MOD 611>; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 611>; + iommus = <&ipmmu_vp0 8>; + }; + csi40: csi2@feaa0000 { compatible = "renesas,r8a774c0-csi2"; reg = <0 0xfeaa0000 0 0x10000>; @@ -1801,13 +1807,13 @@ du: display@feb00000 { compatible = "renesas,du-r8a774c0"; - reg = <0 0xfeb00000 0 0x80000>; + reg = <0 0xfeb00000 0 0x40000>; interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>; clock-names = "du.0", "du.1"; - vsps = <&vspd0 0 &vspd1 0>; + vsps = <&vspd0 0>, <&vspd1 0>; status = "disabled"; ports { @@ -1844,6 +1850,8 @@ resets = <&cpg 727>; status = "disabled"; + renesas,companion = <&lvds1>; + ports { #address-cells = <1>; #size-cells = <0>; @@ -1899,18 +1907,30 @@ thermal-zones { cpu-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; - thermal-sensors = <&thermal>; + polling-delay = <0>; + thermal-sensors = <&thermal 0>; + sustainable-power = <717>; + + cooling-maps { + map0 { + trip = <&target>; + cooling-device = <&a53_0 0 2>; + contribution = <1024>; + }; + }; trips { - cpu-crit { + sensor1_crit: sensor1-crit { temperature = <120000>; hysteresis = <2000>; type = "critical"; }; - }; - cooling-maps { + target: trip-point1 { + temperature = <100000>; + hysteresis = <2000>; + type = "passive"; + }; }; }; }; diff --git a/arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a77950-salvator-x.dts index c1a56eab7b24..2438825c9b22 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x.dts +++ b/arch/arm64/boot/dts/renesas/r8a77950-salvator-x.dts @@ -6,11 +6,11 @@ */ /dts-v1/; -#include "r8a7795-es1.dtsi" +#include "r8a77950.dtsi" #include "salvator-x.dtsi" / { - model = "Renesas Salvator-X board based on r8a7795 ES1.x"; + model = "Renesas Salvator-X board based on r8a77950"; compatible = "renesas,salvator-x", "renesas,r8a7795"; memory@48000000 { @@ -52,12 +52,6 @@ status = "okay"; }; -&sound_card { - dais = <&rsnd_port0 /* ak4613 */ - &rsnd_port1 /* HDMI0 */ - &rsnd_port2>; /* HDMI1 */ -}; - &hdmi0 { status = "okay"; @@ -108,6 +102,13 @@ status = "okay"; }; +&pfc { + usb2_pins: usb2 { + groups = "usb2"; + function = "usb2"; + }; +}; + &rcar_sound { ports { /* rsnd_port0 is on salvator-common */ @@ -138,17 +139,16 @@ }; }; -&pfc { - usb2_pins: usb2 { - groups = "usb2"; - function = "usb2"; - }; -}; - &sata { status = "okay"; }; +&sound_card { + dais = <&rsnd_port0 /* ak4613 */ + &rsnd_port1 /* HDMI0 */ + &rsnd_port2>; /* HDMI1 */ +}; + &usb2_phy2 { pinctrl-0 = <&usb2_pins>; pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-kf.dts b/arch/arm64/boot/dts/renesas/r8a77950-ulcb-kf.dts index 80791ed27539..dcaaf12cec40 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-kf.dts +++ b/arch/arm64/boot/dts/renesas/r8a77950-ulcb-kf.dts @@ -6,11 +6,11 @@ * Copyright (C) 2017 Cogent Embedded, Inc. */ -#include "r8a7795-h3ulcb.dts" +#include "r8a77950-ulcb.dts" #include "ulcb-kf.dtsi" / { - model = "Renesas H3ULCB Kingfisher board based on r8a7795 ES2.0+"; + model = "Renesas H3ULCB Kingfisher board based on r8a77950"; compatible = "shimafuji,kingfisher", "renesas,h3ulcb", "renesas,r8a7795"; }; diff --git a/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb.dts b/arch/arm64/boot/dts/renesas/r8a77950-ulcb.dts index 598b98168559..38a6d6a108d4 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb.dts +++ b/arch/arm64/boot/dts/renesas/r8a77950-ulcb.dts @@ -7,11 +7,11 @@ */ /dts-v1/; -#include "r8a7795-es1.dtsi" +#include "r8a77950.dtsi" #include "ulcb.dtsi" / { - model = "Renesas H3ULCB board based on r8a7795 ES1.x"; + model = "Renesas H3ULCB board based on r8a77950"; compatible = "renesas,h3ulcb", "renesas,r8a7795"; memory@48000000 { diff --git a/arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi b/arch/arm64/boot/dts/renesas/r8a77950.dtsi index 40d10daca852..15216495e1c8 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77950.dtsi @@ -1,28 +1,81 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Device Tree Source for the R-Car H3 (R8A77950) ES1.x SoC + * Device Tree Source for the R-Car H3 (R8A77950) SoC * * Copyright (C) 2015 Renesas Electronics Corp. */ -#include "r8a7795.dtsi" +#include "r8a77951.dtsi" -&soc { - xhci1: usb@ee040000 { - compatible = "renesas,xhci-r8a7795", "renesas,rcar-gen3-xhci"; - reg = <0 0xee040000 0 0xc00>; - interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 327>; - power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; - resets = <&cpg 327>; - status = "disabled"; - }; +&audma0 { + iommus = <&ipmmu_mp1 0>, <&ipmmu_mp1 1>, + <&ipmmu_mp1 2>, <&ipmmu_mp1 3>, + <&ipmmu_mp1 4>, <&ipmmu_mp1 5>, + <&ipmmu_mp1 6>, <&ipmmu_mp1 7>, + <&ipmmu_mp1 8>, <&ipmmu_mp1 9>, + <&ipmmu_mp1 10>, <&ipmmu_mp1 11>, + <&ipmmu_mp1 12>, <&ipmmu_mp1 13>, + <&ipmmu_mp1 14>, <&ipmmu_mp1 15>; +}; - /delete-node/ mmu@febe0000; - /delete-node/ mmu@fe980000; - /delete-node/ mmu@fd950000; - /delete-node/ mmu@fd960000; - /delete-node/ mmu@fd970000; +&audma1 { + iommus = <&ipmmu_mp1 16>, <&ipmmu_mp1 17>, + <&ipmmu_mp1 18>, <&ipmmu_mp1 19>, + <&ipmmu_mp1 20>, <&ipmmu_mp1 21>, + <&ipmmu_mp1 22>, <&ipmmu_mp1 23>, + <&ipmmu_mp1 24>, <&ipmmu_mp1 25>, + <&ipmmu_mp1 26>, <&ipmmu_mp1 27>, + <&ipmmu_mp1 28>, <&ipmmu_mp1 29>, + <&ipmmu_mp1 30>, <&ipmmu_mp1 31>; +}; + +&du { + vsps = <&vspd0 0>, <&vspd1 0>, <&vspd2 0>, <&vspd3 0>; +}; + +&fcpvb1 { + iommus = <&ipmmu_vp0 7>; +}; + +&fcpf1 { + iommus = <&ipmmu_vp0 1>; +}; + +&fcpvi1 { + iommus = <&ipmmu_vp0 9>; +}; + +&fcpvd2 { + iommus = <&ipmmu_vi0 10>; +}; + +&gpio1 { + gpio-ranges = <&pfc 0 32 28>; +}; + +&ipmmu_vi0 { + renesas,ipmmu-main = <&ipmmu_mm 11>; +}; + +&ipmmu_vp0 { + renesas,ipmmu-main = <&ipmmu_mm 12>; +}; + +&ipmmu_vc0 { + renesas,ipmmu-main = <&ipmmu_mm 9>; +}; + +&ipmmu_vc1 { + renesas,ipmmu-main = <&ipmmu_mm 10>; +}; + +&ipmmu_rt { + renesas,ipmmu-main = <&ipmmu_mm 7>; +}; + +&soc { + /delete-node/ dma-controller@e6460000; + /delete-node/ dma-controller@e6470000; ipmmu_mp1: mmu@ec680000 { compatible = "renesas,ipmmu-r8a7795"; @@ -40,13 +93,37 @@ #iommu-cells = <1>; }; - /delete-node/ usb-phy@ee0e0200; - /delete-node/ usb@ee0e0100; - /delete-node/ usb@ee0e0000; + /delete-node/ mmu@fd950000; + /delete-node/ mmu@fd960000; + /delete-node/ mmu@fd970000; + /delete-node/ mmu@febe0000; + /delete-node/ mmu@fe980000; + + xhci1: usb@ee040000 { + compatible = "renesas,xhci-r8a7795", "renesas,rcar-gen3-xhci"; + reg = <0 0xee040000 0 0xc00>; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 327>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 327>; + status = "disabled"; + }; + /delete-node/ usb@e659c000; + /delete-node/ usb@ee0e0000; + /delete-node/ usb@ee0e0100; - /delete-node/ dma-controller@e6460000; - /delete-node/ dma-controller@e6470000; + /delete-node/ usb-phy@ee0e0200; + + fdp1@fe948000 { + compatible = "renesas,fdp1"; + reg = <0 0xfe948000 0 0x2400>; + interrupts = <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 117>; + power-domains = <&sysc R8A7795_PD_A3VP>; + resets = <&cpg 117>; + renesas,fcp = <&fcpf2>; + }; fcpf2: fcp@fe952000 { compatible = "renesas,fcpf"; @@ -57,15 +134,13 @@ iommus = <&ipmmu_vp0 2>; }; - vspi2: vsp@fe9c0000 { - compatible = "renesas,vsp2"; - reg = <0 0xfe9c0000 0 0x8000>; - interrupts = <GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 629>; - power-domains = <&sysc R8A7795_PD_A3VP>; - resets = <&cpg 629>; - - renesas,fcp = <&fcpvi2>; + fcpvd3: fcp@fea3f000 { + compatible = "renesas,fcpv"; + reg = <0 0xfea3f000 0 0x200>; + clocks = <&cpg CPG_MOD 600>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 600>; + iommus = <&ipmmu_vi0 11>; }; fcpvi2: fcp@fe9cf000 { @@ -88,23 +163,15 @@ renesas,fcp = <&fcpvd3>; }; - fcpvd3: fcp@fea3f000 { - compatible = "renesas,fcpv"; - reg = <0 0xfea3f000 0 0x200>; - clocks = <&cpg CPG_MOD 600>; - power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; - resets = <&cpg 600>; - iommus = <&ipmmu_vi0 11>; - }; - - fdp1@fe948000 { - compatible = "renesas,fdp1"; - reg = <0 0xfe948000 0 0x2400>; - interrupts = <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 117>; + vspi2: vsp@fe9c0000 { + compatible = "renesas,vsp2"; + reg = <0 0xfe9c0000 0 0x8000>; + interrupts = <GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 629>; power-domains = <&sysc R8A7795_PD_A3VP>; - resets = <&cpg 117>; - renesas,fcp = <&fcpf2>; + resets = <&cpg 629>; + + renesas,fcp = <&fcpvi2>; }; csi21: csi2@fea90000 { @@ -163,72 +230,6 @@ }; }; -&gpio1 { - gpio-ranges = <&pfc 0 32 28>; -}; - -&ipmmu_vi0 { - renesas,ipmmu-main = <&ipmmu_mm 11>; -}; - -&ipmmu_vp0 { - renesas,ipmmu-main = <&ipmmu_mm 12>; -}; - -&ipmmu_vc0 { - renesas,ipmmu-main = <&ipmmu_mm 9>; -}; - -&ipmmu_vc1 { - renesas,ipmmu-main = <&ipmmu_mm 10>; -}; - -&ipmmu_rt { - renesas,ipmmu-main = <&ipmmu_mm 7>; -}; - -&audma0 { - iommus = <&ipmmu_mp1 0>, <&ipmmu_mp1 1>, - <&ipmmu_mp1 2>, <&ipmmu_mp1 3>, - <&ipmmu_mp1 4>, <&ipmmu_mp1 5>, - <&ipmmu_mp1 6>, <&ipmmu_mp1 7>, - <&ipmmu_mp1 8>, <&ipmmu_mp1 9>, - <&ipmmu_mp1 10>, <&ipmmu_mp1 11>, - <&ipmmu_mp1 12>, <&ipmmu_mp1 13>, - <&ipmmu_mp1 14>, <&ipmmu_mp1 15>; -}; - -&audma1 { - iommus = <&ipmmu_mp1 16>, <&ipmmu_mp1 17>, - <&ipmmu_mp1 18>, <&ipmmu_mp1 19>, - <&ipmmu_mp1 20>, <&ipmmu_mp1 21>, - <&ipmmu_mp1 22>, <&ipmmu_mp1 23>, - <&ipmmu_mp1 24>, <&ipmmu_mp1 25>, - <&ipmmu_mp1 26>, <&ipmmu_mp1 27>, - <&ipmmu_mp1 28>, <&ipmmu_mp1 29>, - <&ipmmu_mp1 30>, <&ipmmu_mp1 31>; -}; - -&fcpvb1 { - iommus = <&ipmmu_vp0 7>; -}; - -&fcpf1 { - iommus = <&ipmmu_vp0 1>; -}; - -&fcpvi1 { - iommus = <&ipmmu_vp0 9>; -}; - -&fcpvd2 { - iommus = <&ipmmu_vi0 10>; -}; - -&du { - vsps = <&vspd0 &vspd1 &vspd2 &vspd3>; -}; - &vin0 { ports { port@1 { diff --git a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a77951-salvator-x.dts index d2d48b33b37f..a402a2fb6e3c 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts +++ b/arch/arm64/boot/dts/renesas/r8a77951-salvator-x.dts @@ -6,11 +6,11 @@ */ /dts-v1/; -#include "r8a7795.dtsi" +#include "r8a77951.dtsi" #include "salvator-x.dtsi" / { - model = "Renesas Salvator-X board based on r8a7795 ES2.0+"; + model = "Renesas Salvator-X board based on r8a77951"; compatible = "renesas,salvator-x", "renesas,r8a7795"; memory@48000000 { @@ -52,12 +52,6 @@ status = "okay"; }; -&sound_card { - dais = <&rsnd_port0 /* ak4613 */ - &rsnd_port1 /* HDMI0 */ - &rsnd_port2>; /* HDMI1 */ -}; - &hdmi0 { status = "okay"; @@ -108,6 +102,13 @@ status = "okay"; }; +&pfc { + usb2_pins: usb2 { + groups = "usb2"; + function = "usb2"; + }; +}; + &rcar_sound { ports { /* rsnd_port0 is on salvator-common */ @@ -138,17 +139,16 @@ }; }; -&pfc { - usb2_pins: usb2 { - groups = "usb2"; - function = "usb2"; - }; -}; - &sata { status = "okay"; }; +&sound_card { + dais = <&rsnd_port0 /* ak4613 */ + &rsnd_port1 /* HDMI0 */ + &rsnd_port2>; /* HDMI1 */ +}; + &usb2_phy2 { pinctrl-0 = <&usb2_pins>; pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts b/arch/arm64/boot/dts/renesas/r8a77951-salvator-xs.dts index 42101fc76837..cef9da4376a3 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts +++ b/arch/arm64/boot/dts/renesas/r8a77951-salvator-xs.dts @@ -1,16 +1,16 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Device Tree Source for the Salvator-X 2nd version board with R-Car H3 ES2.0 + * Device Tree Source for the Salvator-X 2nd version board with R-Car H3 ES2.0+ * * Copyright (C) 2015-2017 Renesas Electronics Corp. */ /dts-v1/; -#include "r8a7795.dtsi" +#include "r8a77951.dtsi" #include "salvator-xs.dtsi" / { - model = "Renesas Salvator-X 2nd version board based on r8a7795 ES2.0+"; + model = "Renesas Salvator-X 2nd version board based on r8a77951"; compatible = "renesas,salvator-xs", "renesas,r8a7795"; memory@48000000 { @@ -57,17 +57,6 @@ status = "okay"; }; -&hsusb3 { - dr_mode = "otg"; - status = "okay"; -}; - -&sound_card { - dais = <&rsnd_port0 /* ak4613 */ - &rsnd_port1 /* HDMI0 */ - &rsnd_port2>; /* HDMI1 */ -}; - &hdmi0 { status = "okay"; @@ -114,6 +103,11 @@ remote-endpoint = <&rcar_dw_hdmi1_out>; }; +&hsusb3 { + dr_mode = "otg"; + status = "okay"; +}; + &ohci2 { status = "okay"; }; @@ -123,36 +117,6 @@ status = "okay"; }; -&rcar_sound { - ports { - /* rsnd_port0 is on salvator-common */ - rsnd_port1: port@1 { - reg = <1>; - rsnd_endpoint1: endpoint { - remote-endpoint = <&dw_hdmi0_snd_in>; - - dai-format = "i2s"; - bitclock-master = <&rsnd_endpoint1>; - frame-master = <&rsnd_endpoint1>; - - playback = <&ssi2>; - }; - }; - rsnd_port2: port@2 { - reg = <2>; - rsnd_endpoint2: endpoint { - remote-endpoint = <&dw_hdmi1_snd_in>; - - dai-format = "i2s"; - bitclock-master = <&rsnd_endpoint2>; - frame-master = <&rsnd_endpoint2>; - - playback = <&ssi3>; - }; - }; - }; -}; - &pca9654 { pcie_sata_switch { gpio-hog; @@ -172,7 +136,7 @@ * - On Salvator-X[S], GP6_3[01] are connected to ADV7482 as irq pins * (when SW31 is the default setting on Salvator-XS). * - If SW31 is the default setting, you cannot use USB2.0 ch3 on - * r8a7795 with Salvator-XS. + * r8a77951 with Salvator-XS. * Hence the SW31 setting must be changed like 2) below. * 1) Default setting of SW31: ON-ON-OFF-OFF-OFF-OFF: * - Connect GP6_3[01] to ADV7842. @@ -186,11 +150,47 @@ }; }; +&rcar_sound { + ports { + /* rsnd_port0 is on salvator-common */ + rsnd_port1: port@1 { + reg = <1>; + rsnd_endpoint1: endpoint { + remote-endpoint = <&dw_hdmi0_snd_in>; + + dai-format = "i2s"; + bitclock-master = <&rsnd_endpoint1>; + frame-master = <&rsnd_endpoint1>; + + playback = <&ssi2>; + }; + }; + rsnd_port2: port@2 { + reg = <2>; + rsnd_endpoint2: endpoint { + remote-endpoint = <&dw_hdmi1_snd_in>; + + dai-format = "i2s"; + bitclock-master = <&rsnd_endpoint2>; + frame-master = <&rsnd_endpoint2>; + + playback = <&ssi3>; + }; + }; + }; +}; + /* SW12-7 must be set 'Off' (MD12 set to 1) which is not the default! */ &sata { status = "okay"; }; +&sound_card { + dais = <&rsnd_port0 /* ak4613 */ + &rsnd_port1 /* HDMI0 */ + &rsnd_port2>; /* HDMI1 */ +}; + &usb2_phy2 { pinctrl-0 = <&usb2_pins>; pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-kf.dts b/arch/arm64/boot/dts/renesas/r8a77951-ulcb-kf.dts index 2f24dfc45617..11f943a67703 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-kf.dts +++ b/arch/arm64/boot/dts/renesas/r8a77951-ulcb-kf.dts @@ -6,11 +6,11 @@ * Copyright (C) 2017 Cogent Embedded, Inc. */ -#include "r8a7795-es1-h3ulcb.dts" +#include "r8a77951-ulcb.dts" #include "ulcb-kf.dtsi" / { - model = "Renesas H3ULCB Kingfisher board based on r8a7795 ES1.x"; + model = "Renesas H3ULCB Kingfisher board based on r8a77951"; compatible = "shimafuji,kingfisher", "renesas,h3ulcb", "renesas,r8a7795"; }; diff --git a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts b/arch/arm64/boot/dts/renesas/r8a77951-ulcb.dts index 54515eaf0310..8ad8f2a53977 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts +++ b/arch/arm64/boot/dts/renesas/r8a77951-ulcb.dts @@ -7,11 +7,11 @@ */ /dts-v1/; -#include "r8a7795.dtsi" +#include "r8a77951.dtsi" #include "ulcb.dtsi" / { - model = "Renesas H3ULCB board based on r8a7795 ES2.0+"; + model = "Renesas H3ULCB board based on r8a77951"; compatible = "renesas,h3ulcb", "renesas,r8a7795"; memory@48000000 { diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi b/arch/arm64/boot/dts/renesas/r8a77951.dtsi index 1745ac4b307e..a8729eb744db 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77951.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Device Tree Source for the R-Car H3 (R8A77950) SoC + * Device Tree Source for the R-Car H3 (R8A77951) SoC * * Copyright (C) 2015 Renesas Electronics Corp. */ @@ -155,6 +155,7 @@ power-domains = <&sysc R8A7795_PD_CA57_CPU0>; next-level-cache = <&L2_CA57>; enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; dynamic-power-coefficient = <854>; clocks = <&cpg CPG_CORE R8A7795_CLK_Z>; operating-points-v2 = <&cluster0_opp>; @@ -169,6 +170,7 @@ power-domains = <&sysc R8A7795_PD_CA57_CPU1>; next-level-cache = <&L2_CA57>; enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; clocks = <&cpg CPG_CORE R8A7795_CLK_Z>; operating-points-v2 = <&cluster0_opp>; capacity-dmips-mhz = <1024>; @@ -182,6 +184,7 @@ power-domains = <&sysc R8A7795_PD_CA57_CPU2>; next-level-cache = <&L2_CA57>; enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; clocks = <&cpg CPG_CORE R8A7795_CLK_Z>; operating-points-v2 = <&cluster0_opp>; capacity-dmips-mhz = <1024>; @@ -195,6 +198,7 @@ power-domains = <&sysc R8A7795_PD_CA57_CPU3>; next-level-cache = <&L2_CA57>; enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; clocks = <&cpg CPG_CORE R8A7795_CLK_Z>; operating-points-v2 = <&cluster0_opp>; capacity-dmips-mhz = <1024>; @@ -208,6 +212,7 @@ power-domains = <&sysc R8A7795_PD_CA53_CPU0>; next-level-cache = <&L2_CA53>; enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_1>; #cooling-cells = <2>; dynamic-power-coefficient = <277>; clocks = <&cpg CPG_CORE R8A7795_CLK_Z2>; @@ -222,6 +227,7 @@ power-domains = <&sysc R8A7795_PD_CA53_CPU1>; next-level-cache = <&L2_CA53>; enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_1>; clocks = <&cpg CPG_CORE R8A7795_CLK_Z2>; operating-points-v2 = <&cluster1_opp>; capacity-dmips-mhz = <535>; @@ -234,6 +240,7 @@ power-domains = <&sysc R8A7795_PD_CA53_CPU2>; next-level-cache = <&L2_CA53>; enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_1>; clocks = <&cpg CPG_CORE R8A7795_CLK_Z2>; operating-points-v2 = <&cluster1_opp>; capacity-dmips-mhz = <535>; @@ -246,6 +253,7 @@ power-domains = <&sysc R8A7795_PD_CA53_CPU3>; next-level-cache = <&L2_CA53>; enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_1>; clocks = <&cpg CPG_CORE R8A7795_CLK_Z2>; operating-points-v2 = <&cluster1_opp>; capacity-dmips-mhz = <535>; @@ -264,6 +272,28 @@ cache-unified; cache-level = <2>; }; + + idle-states { + entry-method = "psci"; + + CPU_SLEEP_0: cpu-sleep-0 { + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x0010000>; + local-timer-stop; + entry-latency-us = <400>; + exit-latency-us = <500>; + min-residency-us = <4000>; + }; + + CPU_SLEEP_1: cpu-sleep-1 { + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x0010000>; + local-timer-stop; + entry-latency-us = <700>; + exit-latency-us = <700>; + min-residency-us = <5000>; + }; + }; }; extal_clk: extal { @@ -575,12 +605,12 @@ #interrupt-cells = <2>; interrupt-controller; reg = <0 0xe61c0000 0 0x200>; - interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 407>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; resets = <&cpg 407>; @@ -843,8 +873,8 @@ compatible = "renesas,r8a7795-usb-dmac", "renesas,usb-dmac"; reg = <0 0xe65a0000 0 0x100>; - interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "ch0", "ch1"; clocks = <&cpg CPG_MOD 330>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; @@ -857,8 +887,8 @@ compatible = "renesas,r8a7795-usb-dmac", "renesas,usb-dmac"; reg = <0 0xe65b0000 0 0x100>; - interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "ch0", "ch1"; clocks = <&cpg CPG_MOD 331>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; @@ -871,8 +901,8 @@ compatible = "renesas,r8a7795-usb-dmac", "renesas,usb-dmac"; reg = <0 0xe6460000 0 0x100>; - interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "ch0", "ch1"; clocks = <&cpg CPG_MOD 326>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; @@ -885,8 +915,8 @@ compatible = "renesas,r8a7795-usb-dmac", "renesas,usb-dmac"; reg = <0 0xe6470000 0 0x100>; - interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "ch0", "ch1"; clocks = <&cpg CPG_MOD 329>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; @@ -921,23 +951,23 @@ compatible = "renesas,dmac-r8a7795", "renesas,rcar-dmac"; reg = <0 0xe6700000 0 0x10000>; - interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", @@ -963,23 +993,23 @@ compatible = "renesas,dmac-r8a7795", "renesas,rcar-dmac"; reg = <0 0xe7300000 0 0x10000>; - interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", @@ -1005,23 +1035,23 @@ compatible = "renesas,dmac-r8a7795", "renesas,rcar-dmac"; reg = <0 0xe7310000 0 0x10000>; - interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", @@ -2313,23 +2343,23 @@ compatible = "renesas,dmac-r8a7795", "renesas,rcar-dmac"; reg = <0 0xec700000 0 0x10000>; - interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", @@ -2355,23 +2385,23 @@ compatible = "renesas,dmac-r8a7795", "renesas,rcar-dmac"; reg = <0 0xec720000 0 0x10000>; - interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", @@ -2569,6 +2599,7 @@ max-frequency = <200000000>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; resets = <&cpg 314>; + iommus = <&ipmmu_ds1 32>; status = "disabled"; }; @@ -2581,6 +2612,7 @@ max-frequency = <200000000>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; resets = <&cpg 313>; + iommus = <&ipmmu_ds1 33>; status = "disabled"; }; @@ -2593,6 +2625,7 @@ max-frequency = <200000000>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; resets = <&cpg 312>; + iommus = <&ipmmu_ds1 34>; status = "disabled"; }; @@ -2605,6 +2638,7 @@ max-frequency = <200000000>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; resets = <&cpg 311>; + iommus = <&ipmmu_ds1 35>; status = "disabled"; }; @@ -2645,10 +2679,10 @@ #size-cells = <2>; bus-range = <0x00 0xff>; device_type = "pci"; - ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000 - 0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000 - 0x02000000 0 0x30000000 0 0x30000000 0 0x08000000 - 0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>; + ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000>, + <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>, + <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>, + <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>; /* Map all possible DDR as inbound ranges */ dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x40000000>; interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, @@ -2672,10 +2706,10 @@ #size-cells = <2>; bus-range = <0x00 0xff>; device_type = "pci"; - ranges = <0x01000000 0 0x00000000 0 0xee900000 0 0x00100000 - 0x02000000 0 0xeea00000 0 0xeea00000 0 0x00200000 - 0x02000000 0 0xc0000000 0 0xc0000000 0 0x08000000 - 0x42000000 0 0xc8000000 0 0xc8000000 0 0x08000000>; + ranges = <0x01000000 0 0x00000000 0 0xee900000 0 0x00100000>, + <0x02000000 0 0xeea00000 0 0xeea00000 0 0x00200000>, + <0x02000000 0 0xc0000000 0 0xc0000000 0 0x08000000>, + <0x42000000 0 0xc8000000 0 0xc8000000 0 0x08000000>; /* Map all possible DDR as inbound ranges */ dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x40000000>; interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, @@ -2731,6 +2765,83 @@ resets = <&cpg 820>; }; + vspbc: vsp@fe920000 { + compatible = "renesas,vsp2"; + reg = <0 0xfe920000 0 0x8000>; + interrupts = <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 624>; + power-domains = <&sysc R8A7795_PD_A3VP>; + resets = <&cpg 624>; + + renesas,fcp = <&fcpvb1>; + }; + + vspbd: vsp@fe960000 { + compatible = "renesas,vsp2"; + reg = <0 0xfe960000 0 0x8000>; + interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 626>; + power-domains = <&sysc R8A7795_PD_A3VP>; + resets = <&cpg 626>; + + renesas,fcp = <&fcpvb0>; + }; + + vspd0: vsp@fea20000 { + compatible = "renesas,vsp2"; + reg = <0 0xfea20000 0 0x5000>; + interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 623>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 623>; + + renesas,fcp = <&fcpvd0>; + }; + + vspd1: vsp@fea28000 { + compatible = "renesas,vsp2"; + reg = <0 0xfea28000 0 0x5000>; + interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 622>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 622>; + + renesas,fcp = <&fcpvd1>; + }; + + vspd2: vsp@fea30000 { + compatible = "renesas,vsp2"; + reg = <0 0xfea30000 0 0x5000>; + interrupts = <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 621>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 621>; + + renesas,fcp = <&fcpvd2>; + }; + + vspi0: vsp@fe9a0000 { + compatible = "renesas,vsp2"; + reg = <0 0xfe9a0000 0 0x8000>; + interrupts = <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 631>; + power-domains = <&sysc R8A7795_PD_A3VP>; + resets = <&cpg 631>; + + renesas,fcp = <&fcpvi0>; + }; + + vspi1: vsp@fe9b0000 { + compatible = "renesas,vsp2"; + reg = <0 0xfe9b0000 0 0x8000>; + interrupts = <GIC_SPI 445 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 630>; + power-domains = <&sysc R8A7795_PD_A3VP>; + resets = <&cpg 630>; + + renesas,fcp = <&fcpvi1>; + }; + fdp1@fe940000 { compatible = "renesas,fdp1"; reg = <0 0xfe940000 0 0x2400>; @@ -2832,81 +2943,40 @@ iommus = <&ipmmu_vi1 10>; }; - vspbd: vsp@fe960000 { - compatible = "renesas,vsp2"; - reg = <0 0xfe960000 0 0x8000>; - interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 626>; - power-domains = <&sysc R8A7795_PD_A3VP>; - resets = <&cpg 626>; - - renesas,fcp = <&fcpvb0>; - }; - - vspbc: vsp@fe920000 { - compatible = "renesas,vsp2"; - reg = <0 0xfe920000 0 0x8000>; - interrupts = <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 624>; - power-domains = <&sysc R8A7795_PD_A3VP>; - resets = <&cpg 624>; - - renesas,fcp = <&fcpvb1>; - }; - - vspd0: vsp@fea20000 { - compatible = "renesas,vsp2"; - reg = <0 0xfea20000 0 0x5000>; - interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 623>; + cmm0: cmm@fea40000 { + compatible = "renesas,r8a7795-cmm", + "renesas,rcar-gen3-cmm"; + reg = <0 0xfea40000 0 0x1000>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; - resets = <&cpg 623>; - - renesas,fcp = <&fcpvd0>; + clocks = <&cpg CPG_MOD 711>; + resets = <&cpg 711>; }; - vspd1: vsp@fea28000 { - compatible = "renesas,vsp2"; - reg = <0 0xfea28000 0 0x5000>; - interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 622>; + cmm1: cmm@fea50000 { + compatible = "renesas,r8a7795-cmm", + "renesas,rcar-gen3-cmm"; + reg = <0 0xfea50000 0 0x1000>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; - resets = <&cpg 622>; - - renesas,fcp = <&fcpvd1>; + clocks = <&cpg CPG_MOD 710>; + resets = <&cpg 710>; }; - vspd2: vsp@fea30000 { - compatible = "renesas,vsp2"; - reg = <0 0xfea30000 0 0x5000>; - interrupts = <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 621>; + cmm2: cmm@fea60000 { + compatible = "renesas,r8a7795-cmm", + "renesas,rcar-gen3-cmm"; + reg = <0 0xfea60000 0 0x1000>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; - resets = <&cpg 621>; - - renesas,fcp = <&fcpvd2>; - }; - - vspi0: vsp@fe9a0000 { - compatible = "renesas,vsp2"; - reg = <0 0xfe9a0000 0 0x8000>; - interrupts = <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 631>; - power-domains = <&sysc R8A7795_PD_A3VP>; - resets = <&cpg 631>; - - renesas,fcp = <&fcpvi0>; + clocks = <&cpg CPG_MOD 709>; + resets = <&cpg 709>; }; - vspi1: vsp@fe9b0000 { - compatible = "renesas,vsp2"; - reg = <0 0xfe9b0000 0 0x8000>; - interrupts = <GIC_SPI 445 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 630>; - power-domains = <&sysc R8A7795_PD_A3VP>; - resets = <&cpg 630>; - - renesas,fcp = <&fcpvi1>; + cmm3: cmm@fea70000 { + compatible = "renesas,r8a7795-cmm", + "renesas,rcar-gen3-cmm"; + reg = <0 0xfea70000 0 0x1000>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + clocks = <&cpg CPG_MOD 708>; + resets = <&cpg 708>; }; csi20: csi2@fea80000 { @@ -3112,7 +3182,10 @@ <&cpg CPG_MOD 722>, <&cpg CPG_MOD 721>; clock-names = "du.0", "du.1", "du.2", "du.3"; - vsps = <&vspd0 0 &vspd1 0 &vspd2 0 &vspd0 1>; + + renesas,cmms = <&cmm0>, <&cmm1>, <&cmm2>, <&cmm3>; + vsps = <&vspd0 0>, <&vspd1 0>, <&vspd2 0>, <&vspd0 1>; + status = "disabled"; ports { diff --git a/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a77960-salvator-x.dts index 2aefa53cb16b..ecfbeafeaf36 100644 --- a/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts +++ b/arch/arm64/boot/dts/renesas/r8a77960-salvator-x.dts @@ -6,11 +6,11 @@ */ /dts-v1/; -#include "r8a7796.dtsi" +#include "r8a77960.dtsi" #include "salvator-x.dtsi" / { - model = "Renesas Salvator-X board based on r8a7796"; + model = "Renesas Salvator-X board based on r8a77960"; compatible = "renesas,salvator-x", "renesas,r8a7796"; memory@48000000 { @@ -36,11 +36,6 @@ "dclkin.0", "dclkin.1", "dclkin.2"; }; -&sound_card { - dais = <&rsnd_port0 /* ak4613 */ - &rsnd_port1>; /* HDMI0 */ -}; - &hdmi0 { status = "okay"; @@ -81,3 +76,8 @@ }; }; }; + +&sound_card { + dais = <&rsnd_port0 /* ak4613 */ + &rsnd_port1>; /* HDMI0 */ +}; diff --git a/arch/arm64/boot/dts/renesas/r8a7796-salvator-xs.dts b/arch/arm64/boot/dts/renesas/r8a77960-salvator-xs.dts index d58ede18108d..249896a38fdc 100644 --- a/arch/arm64/boot/dts/renesas/r8a7796-salvator-xs.dts +++ b/arch/arm64/boot/dts/renesas/r8a77960-salvator-xs.dts @@ -6,11 +6,11 @@ */ /dts-v1/; -#include "r8a7796.dtsi" +#include "r8a77960.dtsi" #include "salvator-xs.dtsi" / { - model = "Renesas Salvator-X 2nd version board based on r8a7796"; + model = "Renesas Salvator-X 2nd version board based on r8a77960"; compatible = "renesas,salvator-xs", "renesas,r8a7796"; memory@48000000 { @@ -36,11 +36,6 @@ "dclkin.0", "dclkin.1", "dclkin.2"; }; -&sound_card { - dais = <&rsnd_port0 /* ak4613 */ - &rsnd_port1>; /* HDMI0 */ -}; - &hdmi0 { status = "okay"; @@ -81,3 +76,8 @@ }; }; }; + +&sound_card { + dais = <&rsnd_port0 /* ak4613 */ + &rsnd_port1>; /* HDMI0 */ +}; diff --git a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-kf.dts b/arch/arm64/boot/dts/renesas/r8a77960-ulcb-kf.dts index 2df50eb11f16..2151c37d77a6 100644 --- a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-kf.dts +++ b/arch/arm64/boot/dts/renesas/r8a77960-ulcb-kf.dts @@ -6,11 +6,11 @@ * Copyright (C) 2017 Cogent Embedded, Inc. */ -#include "r8a7796-m3ulcb.dts" +#include "r8a77960-ulcb.dts" #include "ulcb-kf.dtsi" / { - model = "Renesas M3ULCB Kingfisher board based on r8a7796"; + model = "Renesas M3ULCB Kingfisher board based on r8a77960"; compatible = "shimafuji,kingfisher", "renesas,m3ulcb", "renesas,r8a7796"; }; diff --git a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts b/arch/arm64/boot/dts/renesas/r8a77960-ulcb.dts index 9e4594c27fa6..d041042a5619 100644 --- a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts +++ b/arch/arm64/boot/dts/renesas/r8a77960-ulcb.dts @@ -7,11 +7,11 @@ */ /dts-v1/; -#include "r8a7796.dtsi" +#include "r8a77960.dtsi" #include "ulcb.dtsi" / { - model = "Renesas M3ULCB board based on r8a7796"; + model = "Renesas M3ULCB board based on r8a77960"; compatible = "renesas,m3ulcb", "renesas,r8a7796"; memory@48000000 { diff --git a/arch/arm64/boot/dts/renesas/r8a7796.dtsi b/arch/arm64/boot/dts/renesas/r8a77960.dtsi index 26df5b88efd7..60f156cfd2d6 100644 --- a/arch/arm64/boot/dts/renesas/r8a7796.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77960.dtsi @@ -160,6 +160,7 @@ power-domains = <&sysc R8A7796_PD_CA57_CPU0>; next-level-cache = <&L2_CA57>; enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; dynamic-power-coefficient = <854>; clocks = <&cpg CPG_CORE R8A7796_CLK_Z>; operating-points-v2 = <&cluster0_opp>; @@ -174,6 +175,7 @@ power-domains = <&sysc R8A7796_PD_CA57_CPU1>; next-level-cache = <&L2_CA57>; enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; clocks = <&cpg CPG_CORE R8A7796_CLK_Z>; operating-points-v2 = <&cluster0_opp>; capacity-dmips-mhz = <1024>; @@ -187,6 +189,7 @@ power-domains = <&sysc R8A7796_PD_CA53_CPU0>; next-level-cache = <&L2_CA53>; enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_1>; #cooling-cells = <2>; dynamic-power-coefficient = <277>; clocks = <&cpg CPG_CORE R8A7796_CLK_Z2>; @@ -201,6 +204,7 @@ power-domains = <&sysc R8A7796_PD_CA53_CPU1>; next-level-cache = <&L2_CA53>; enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_1>; clocks = <&cpg CPG_CORE R8A7796_CLK_Z2>; operating-points-v2 = <&cluster1_opp>; capacity-dmips-mhz = <535>; @@ -213,6 +217,7 @@ power-domains = <&sysc R8A7796_PD_CA53_CPU2>; next-level-cache = <&L2_CA53>; enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_1>; clocks = <&cpg CPG_CORE R8A7796_CLK_Z2>; operating-points-v2 = <&cluster1_opp>; capacity-dmips-mhz = <535>; @@ -225,6 +230,7 @@ power-domains = <&sysc R8A7796_PD_CA53_CPU3>; next-level-cache = <&L2_CA53>; enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_1>; clocks = <&cpg CPG_CORE R8A7796_CLK_Z2>; operating-points-v2 = <&cluster1_opp>; capacity-dmips-mhz = <535>; @@ -243,6 +249,28 @@ cache-unified; cache-level = <2>; }; + + idle-states { + entry-method = "psci"; + + CPU_SLEEP_0: cpu-sleep-0 { + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x0010000>; + local-timer-stop; + entry-latency-us = <400>; + exit-latency-us = <500>; + min-residency-us = <4000>; + }; + + CPU_SLEEP_1: cpu-sleep-1 { + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x0010000>; + local-timer-stop; + entry-latency-us = <700>; + exit-latency-us = <700>; + min-residency-us = <5000>; + }; + }; }; extal_clk: extal { @@ -546,12 +574,12 @@ #interrupt-cells = <2>; interrupt-controller; reg = <0 0xe61c0000 0 0x200>; - interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 407>; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; resets = <&cpg 407>; @@ -797,8 +825,8 @@ compatible = "renesas,r8a7796-usb-dmac", "renesas,usb-dmac"; reg = <0 0xe65a0000 0 0x100>; - interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "ch0", "ch1"; clocks = <&cpg CPG_MOD 330>; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; @@ -811,8 +839,8 @@ compatible = "renesas,r8a7796-usb-dmac", "renesas,usb-dmac"; reg = <0 0xe65b0000 0 0x100>; - interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "ch0", "ch1"; clocks = <&cpg CPG_MOD 331>; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; @@ -838,23 +866,23 @@ compatible = "renesas,dmac-r8a7796", "renesas,rcar-dmac"; reg = <0 0xe6700000 0 0x10000>; - interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", @@ -880,23 +908,23 @@ compatible = "renesas,dmac-r8a7796", "renesas,rcar-dmac"; reg = <0 0xe7300000 0 0x10000>; - interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", @@ -922,23 +950,23 @@ compatible = "renesas,dmac-r8a7796", "renesas,rcar-dmac"; reg = <0 0xe7310000 0 0x10000>; - interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", @@ -1833,6 +1861,17 @@ "ssi.1", "ssi.0"; status = "disabled"; + rcar_sound,ctu { + ctu00: ctu-0 { }; + ctu01: ctu-1 { }; + ctu02: ctu-2 { }; + ctu03: ctu-3 { }; + ctu10: ctu-4 { }; + ctu11: ctu-5 { }; + ctu12: ctu-6 { }; + ctu13: ctu-7 { }; + }; + rcar_sound,dvc { dvc0: dvc-0 { dmas = <&audma1 0xbc>; @@ -1849,17 +1888,6 @@ mix1: mix-1 { }; }; - rcar_sound,ctu { - ctu00: ctu-0 { }; - ctu01: ctu-1 { }; - ctu02: ctu-2 { }; - ctu03: ctu-3 { }; - ctu10: ctu-4 { }; - ctu11: ctu-5 { }; - ctu12: ctu-6 { }; - ctu13: ctu-7 { }; - }; - rcar_sound,src { src0: src-0 { interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>; @@ -1913,6 +1941,59 @@ }; }; + rcar_sound,ssi { + ssi0: ssi-0 { + interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x01>, <&audma1 0x02>; + dma-names = "rx", "tx"; + }; + ssi1: ssi-1 { + interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x03>, <&audma1 0x04>; + dma-names = "rx", "tx"; + }; + ssi2: ssi-2 { + interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x05>, <&audma1 0x06>; + dma-names = "rx", "tx"; + }; + ssi3: ssi-3 { + interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x07>, <&audma1 0x08>; + dma-names = "rx", "tx"; + }; + ssi4: ssi-4 { + interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x09>, <&audma1 0x0a>; + dma-names = "rx", "tx"; + }; + ssi5: ssi-5 { + interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x0b>, <&audma1 0x0c>; + dma-names = "rx", "tx"; + }; + ssi6: ssi-6 { + interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x0d>, <&audma1 0x0e>; + dma-names = "rx", "tx"; + }; + ssi7: ssi-7 { + interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x0f>, <&audma1 0x10>; + dma-names = "rx", "tx"; + }; + ssi8: ssi-8 { + interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x11>, <&audma1 0x12>; + dma-names = "rx", "tx"; + }; + ssi9: ssi-9 { + interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x13>, <&audma1 0x14>; + dma-names = "rx", "tx"; + }; + }; + rcar_sound,ssiu { ssiu00: ssiu-0 { dmas = <&audma0 0x15>, <&audma1 0x16>; @@ -2123,82 +2204,29 @@ dma-names = "rx", "tx"; }; }; - - rcar_sound,ssi { - ssi0: ssi-0 { - interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x01>, <&audma1 0x02>; - dma-names = "rx", "tx"; - }; - ssi1: ssi-1 { - interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x03>, <&audma1 0x04>; - dma-names = "rx", "tx"; - }; - ssi2: ssi-2 { - interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x05>, <&audma1 0x06>; - dma-names = "rx", "tx"; - }; - ssi3: ssi-3 { - interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x07>, <&audma1 0x08>; - dma-names = "rx", "tx"; - }; - ssi4: ssi-4 { - interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x09>, <&audma1 0x0a>; - dma-names = "rx", "tx"; - }; - ssi5: ssi-5 { - interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x0b>, <&audma1 0x0c>; - dma-names = "rx", "tx"; - }; - ssi6: ssi-6 { - interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x0d>, <&audma1 0x0e>; - dma-names = "rx", "tx"; - }; - ssi7: ssi-7 { - interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x0f>, <&audma1 0x10>; - dma-names = "rx", "tx"; - }; - ssi8: ssi-8 { - interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x11>, <&audma1 0x12>; - dma-names = "rx", "tx"; - }; - ssi9: ssi-9 { - interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x13>, <&audma1 0x14>; - dma-names = "rx", "tx"; - }; - }; }; audma0: dma-controller@ec700000 { compatible = "renesas,dmac-r8a7796", "renesas,rcar-dmac"; reg = <0 0xec700000 0 0x10000>; - interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", @@ -2224,23 +2252,23 @@ compatible = "renesas,dmac-r8a7796", "renesas,rcar-dmac"; reg = <0 0xec720000 0 0x10000>; - interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", @@ -2366,6 +2394,7 @@ max-frequency = <200000000>; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; resets = <&cpg 314>; + iommus = <&ipmmu_ds1 32>; status = "disabled"; }; @@ -2378,6 +2407,7 @@ max-frequency = <200000000>; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; resets = <&cpg 313>; + iommus = <&ipmmu_ds1 33>; status = "disabled"; }; @@ -2390,6 +2420,7 @@ max-frequency = <200000000>; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; resets = <&cpg 312>; + iommus = <&ipmmu_ds1 34>; status = "disabled"; }; @@ -2402,6 +2433,7 @@ max-frequency = <200000000>; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; resets = <&cpg 311>; + iommus = <&ipmmu_ds1 35>; status = "disabled"; }; @@ -2430,10 +2462,10 @@ #size-cells = <2>; bus-range = <0x00 0xff>; device_type = "pci"; - ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000 - 0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000 - 0x02000000 0 0x30000000 0 0x30000000 0 0x08000000 - 0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>; + ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000>, + <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>, + <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>, + <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>; /* Map all possible DDR as inbound ranges */ dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>; interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, @@ -2457,10 +2489,10 @@ #size-cells = <2>; bus-range = <0x00 0xff>; device_type = "pci"; - ranges = <0x01000000 0 0x00000000 0 0xee900000 0 0x00100000 - 0x02000000 0 0xeea00000 0 0xeea00000 0 0x00200000 - 0x02000000 0 0xc0000000 0 0xc0000000 0 0x08000000 - 0x42000000 0 0xc8000000 0 0xc8000000 0 0x08000000>; + ranges = <0x01000000 0 0x00000000 0 0xee900000 0 0x00100000>, + <0x02000000 0 0xeea00000 0 0xeea00000 0 0x00200000>, + <0x02000000 0 0xc0000000 0 0xc0000000 0 0x08000000>, + <0x42000000 0 0xc8000000 0 0xc8000000 0 0x08000000>; /* Map all possible DDR as inbound ranges */ dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>; interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, @@ -2613,6 +2645,33 @@ renesas,fcp = <&fcpvi0>; }; + cmm0: cmm@fea40000 { + compatible = "renesas,r8a7796-cmm", + "renesas,rcar-gen3-cmm"; + reg = <0 0xfea40000 0 0x1000>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + clocks = <&cpg CPG_MOD 711>; + resets = <&cpg 711>; + }; + + cmm1: cmm@fea50000 { + compatible = "renesas,r8a7796-cmm", + "renesas,rcar-gen3-cmm"; + reg = <0 0xfea50000 0 0x1000>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + clocks = <&cpg CPG_MOD 710>; + resets = <&cpg 710>; + }; + + cmm2: cmm@fea60000 { + compatible = "renesas,r8a7796-cmm", + "renesas,rcar-gen3-cmm"; + reg = <0 0xfea60000 0 0x1000>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + clocks = <&cpg CPG_MOD 709>; + resets = <&cpg 709>; + }; + csi20: csi2@fea80000 { compatible = "renesas,r8a7796-csi2"; reg = <0 0xfea80000 0 0x10000>; @@ -2763,9 +2822,11 @@ <&cpg CPG_MOD 723>, <&cpg CPG_MOD 722>; clock-names = "du.0", "du.1", "du.2"; - status = "disabled"; - vsps = <&vspd0 &vspd1 &vspd2>; + renesas,cmms = <&cmm0>, <&cmm1>, <&cmm2>; + vsps = <&vspd0 0>, <&vspd1 0>, <&vspd2 0>; + + status = "disabled"; ports { #address-cells = <1>; @@ -2860,6 +2921,18 @@ thermal-sensors = <&tsc 2>; sustainable-power = <3874>; + cooling-maps { + map0 { + trip = <&target>; + cooling-device = <&a57_0 2 4>; + contribution = <1024>; + }; + map1 { + trip = <&target>; + cooling-device = <&a53_0 0 2>; + contribution = <1024>; + }; + }; trips { target: trip-point1 { temperature = <100000>; @@ -2873,18 +2946,6 @@ type = "critical"; }; }; - cooling-maps { - map0 { - trip = <&target>; - cooling-device = <&a57_0 2 4>; - contribution = <1024>; - }; - map1 { - trip = <&target>; - cooling-device = <&a53_0 0 2>; - contribution = <1024>; - }; - }; }; }; diff --git a/arch/arm64/boot/dts/renesas/r8a77961-salvator-xs.dts b/arch/arm64/boot/dts/renesas/r8a77961-salvator-xs.dts new file mode 100644 index 000000000000..4abd78ac1cd5 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a77961-salvator-xs.dts @@ -0,0 +1,31 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the Salvator-X 2nd version board with R-Car M3-W+ + * + * Copyright (C) 2018 Renesas Electronics Corp. + */ + +/dts-v1/; +#include "r8a77961.dtsi" +#include "salvator-xs.dtsi" + +/ { + model = "Renesas Salvator-X 2nd version board based on r8a77961"; + compatible = "renesas,salvator-xs", "renesas,r8a77961"; + + memory@48000000 { + device_type = "memory"; + /* first 128MB is reserved for secure area. */ + reg = <0x0 0x48000000 0x0 0x78000000>; + }; + + memory@400000000 { + device_type = "memory"; + reg = <0x4 0x80000000 0x0 0x80000000>; + }; + + memory@600000000 { + device_type = "memory"; + reg = <0x6 0x00000000 0x1 0x00000000>; + }; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a77961.dtsi b/arch/arm64/boot/dts/renesas/r8a77961.dtsi new file mode 100644 index 000000000000..be3824bda632 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a77961.dtsi @@ -0,0 +1,1087 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the R-Car M3-W+ (R8A77961) SoC + * + * Copyright (C) 2016-2017 Renesas Electronics Corp. + */ + +#include <dt-bindings/clock/r8a77961-cpg-mssr.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/power/r8a77961-sysc.h> + +#define CPG_AUDIO_CLK_I R8A77961_CLK_S0D4 + +/ { + compatible = "renesas,r8a77961"; + #address-cells = <2>; + #size-cells = <2>; + + /* + * The external audio clocks are configured as 0 Hz fixed frequency + * clocks by default. + * Boards that provide audio clocks should override them. + */ + audio_clk_a: audio_clk_a { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + audio_clk_b: audio_clk_b { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + audio_clk_c: audio_clk_c { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + /* External CAN clock - to be overridden by boards that provide it */ + can_clk: can { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + cluster0_opp: opp_table0 { + compatible = "operating-points-v2"; + opp-shared; + + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + opp-microvolt = <820000>; + clock-latency-ns = <300000>; + }; + opp-1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <820000>; + clock-latency-ns = <300000>; + }; + opp-1500000000 { + opp-hz = /bits/ 64 <1500000000>; + opp-microvolt = <820000>; + clock-latency-ns = <300000>; + }; + opp-1600000000 { + opp-hz = /bits/ 64 <1600000000>; + opp-microvolt = <900000>; + clock-latency-ns = <300000>; + turbo-mode; + }; + opp-1700000000 { + opp-hz = /bits/ 64 <1700000000>; + opp-microvolt = <900000>; + clock-latency-ns = <300000>; + turbo-mode; + }; + opp-1800000000 { + opp-hz = /bits/ 64 <1800000000>; + opp-microvolt = <960000>; + clock-latency-ns = <300000>; + turbo-mode; + }; + }; + + cluster1_opp: opp_table1 { + compatible = "operating-points-v2"; + opp-shared; + + opp-800000000 { + opp-hz = /bits/ 64 <800000000>; + opp-microvolt = <820000>; + clock-latency-ns = <300000>; + }; + opp-1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <820000>; + clock-latency-ns = <300000>; + }; + opp-1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <820000>; + clock-latency-ns = <300000>; + }; + opp-1300000000 { + opp-hz = /bits/ 64 <1300000000>; + opp-microvolt = <820000>; + clock-latency-ns = <300000>; + turbo-mode; + }; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu-map { + cluster0 { + core0 { + cpu = <&a57_0>; + }; + core1 { + cpu = <&a57_1>; + }; + }; + + cluster1 { + core0 { + cpu = <&a53_0>; + }; + core1 { + cpu = <&a53_1>; + }; + core2 { + cpu = <&a53_2>; + }; + core3 { + cpu = <&a53_3>; + }; + }; + }; + + a57_0: cpu@0 { + compatible = "arm,cortex-a57"; + reg = <0x0>; + device_type = "cpu"; + power-domains = <&sysc R8A77961_PD_CA57_CPU0>; + next-level-cache = <&L2_CA57>; + enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; + dynamic-power-coefficient = <854>; + clocks = <&cpg CPG_CORE R8A77961_CLK_Z>; + operating-points-v2 = <&cluster0_opp>; + capacity-dmips-mhz = <1024>; + #cooling-cells = <2>; + }; + + a57_1: cpu@1 { + compatible = "arm,cortex-a57"; + reg = <0x1>; + device_type = "cpu"; + power-domains = <&sysc R8A77961_PD_CA57_CPU1>; + next-level-cache = <&L2_CA57>; + enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; + clocks = <&cpg CPG_CORE R8A77961_CLK_Z>; + operating-points-v2 = <&cluster0_opp>; + capacity-dmips-mhz = <1024>; + #cooling-cells = <2>; + }; + + a53_0: cpu@100 { + compatible = "arm,cortex-a53"; + reg = <0x100>; + device_type = "cpu"; + power-domains = <&sysc R8A77961_PD_CA53_CPU0>; + next-level-cache = <&L2_CA53>; + enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_1>; + #cooling-cells = <2>; + dynamic-power-coefficient = <277>; + clocks = <&cpg CPG_CORE R8A77961_CLK_Z2>; + operating-points-v2 = <&cluster1_opp>; + capacity-dmips-mhz = <535>; + }; + + a53_1: cpu@101 { + compatible = "arm,cortex-a53"; + reg = <0x101>; + device_type = "cpu"; + power-domains = <&sysc R8A77961_PD_CA53_CPU1>; + next-level-cache = <&L2_CA53>; + enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_1>; + clocks = <&cpg CPG_CORE R8A77961_CLK_Z2>; + operating-points-v2 = <&cluster1_opp>; + capacity-dmips-mhz = <535>; + }; + + a53_2: cpu@102 { + compatible = "arm,cortex-a53"; + reg = <0x102>; + device_type = "cpu"; + power-domains = <&sysc R8A77961_PD_CA53_CPU2>; + next-level-cache = <&L2_CA53>; + enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_1>; + clocks = <&cpg CPG_CORE R8A77961_CLK_Z2>; + operating-points-v2 = <&cluster1_opp>; + capacity-dmips-mhz = <535>; + }; + + a53_3: cpu@103 { + compatible = "arm,cortex-a53"; + reg = <0x103>; + device_type = "cpu"; + power-domains = <&sysc R8A77961_PD_CA53_CPU3>; + next-level-cache = <&L2_CA53>; + enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_1>; + clocks = <&cpg CPG_CORE R8A77961_CLK_Z2>; + operating-points-v2 = <&cluster1_opp>; + capacity-dmips-mhz = <535>; + }; + + L2_CA57: cache-controller-0 { + compatible = "cache"; + power-domains = <&sysc R8A77961_PD_CA57_SCU>; + cache-unified; + cache-level = <2>; + }; + + L2_CA53: cache-controller-1 { + compatible = "cache"; + power-domains = <&sysc R8A77961_PD_CA53_SCU>; + cache-unified; + cache-level = <2>; + }; + + idle-states { + entry-method = "psci"; + + CPU_SLEEP_0: cpu-sleep-0 { + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x0010000>; + local-timer-stop; + entry-latency-us = <400>; + exit-latency-us = <500>; + min-residency-us = <4000>; + }; + + CPU_SLEEP_1: cpu-sleep-1 { + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x0010000>; + local-timer-stop; + entry-latency-us = <700>; + exit-latency-us = <700>; + min-residency-us = <5000>; + }; + }; + }; + + extal_clk: extal { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board */ + clock-frequency = <0>; + }; + + extalr_clk: extalr { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board */ + clock-frequency = <0>; + }; + + /* External PCIe clock - can be overridden by the board */ + pcie_bus_clk: pcie_bus { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + pmu_a53 { + compatible = "arm,cortex-a53-pmu"; + interrupts-extended = <&gic GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&a53_0>, <&a53_1>, <&a53_2>, <&a53_3>; + }; + + pmu_a57 { + compatible = "arm,cortex-a57-pmu"; + interrupts-extended = <&gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&a57_0>, <&a57_1>; + }; + + psci { + compatible = "arm,psci-1.0", "arm,psci-0.2"; + method = "smc"; + }; + + /* External SCIF clock - to be overridden by boards that provide it */ + scif_clk: scif { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + soc { + compatible = "simple-bus"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + rwdt: watchdog@e6020000 { + compatible = "renesas,r8a77961-wdt", + "renesas,rcar-gen3-wdt"; + reg = <0 0xe6020000 0 0x0c>; + clocks = <&cpg CPG_MOD 402>; + power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; + resets = <&cpg 402>; + status = "disabled"; + }; + + gpio0: gpio@e6050000 { + compatible = "renesas,gpio-r8a77961", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6050000 0 0x50>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 0 16>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 912>; + power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; + resets = <&cpg 912>; + }; + + gpio1: gpio@e6051000 { + compatible = "renesas,gpio-r8a77961", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6051000 0 0x50>; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 32 29>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 911>; + power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; + resets = <&cpg 911>; + }; + + gpio2: gpio@e6052000 { + compatible = "renesas,gpio-r8a77961", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6052000 0 0x50>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 64 15>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 910>; + power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; + resets = <&cpg 910>; + }; + + gpio3: gpio@e6053000 { + compatible = "renesas,gpio-r8a77961", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6053000 0 0x50>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 96 16>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 909>; + power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; + resets = <&cpg 909>; + }; + + gpio4: gpio@e6054000 { + compatible = "renesas,gpio-r8a77961", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6054000 0 0x50>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 128 18>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 908>; + power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; + resets = <&cpg 908>; + }; + + gpio5: gpio@e6055000 { + compatible = "renesas,gpio-r8a77961", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6055000 0 0x50>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 160 26>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 907>; + power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; + resets = <&cpg 907>; + }; + + gpio6: gpio@e6055400 { + compatible = "renesas,gpio-r8a77961", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6055400 0 0x50>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 192 32>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 906>; + power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; + resets = <&cpg 906>; + }; + + gpio7: gpio@e6055800 { + compatible = "renesas,gpio-r8a77961", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6055800 0 0x50>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 224 4>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 905>; + power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; + resets = <&cpg 905>; + }; + + pfc: pin-controller@e6060000 { + compatible = "renesas,pfc-r8a77961"; + reg = <0 0xe6060000 0 0x50c>; + }; + + cpg: clock-controller@e6150000 { + compatible = "renesas,r8a77961-cpg-mssr"; + reg = <0 0xe6150000 0 0x1000>; + clocks = <&extal_clk>, <&extalr_clk>; + clock-names = "extal", "extalr"; + #clock-cells = <2>; + #power-domain-cells = <0>; + #reset-cells = <1>; + }; + + rst: reset-controller@e6160000 { + compatible = "renesas,r8a77961-rst"; + reg = <0 0xe6160000 0 0x0200>; + }; + + sysc: system-controller@e6180000 { + compatible = "renesas,r8a77961-sysc"; + reg = <0 0xe6180000 0 0x0400>; + #power-domain-cells = <1>; + }; + + intc_ex: interrupt-controller@e61c0000 { + #interrupt-cells = <2>; + interrupt-controller; + reg = <0 0xe61c0000 0 0x200>; + /* placeholder */ + }; + + i2c0: i2c@e6500000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a77961", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe6500000 0 0x40>; + interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 931>; + power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; + resets = <&cpg 931>; + dmas = <&dmac1 0x91>, <&dmac1 0x90>, + <&dmac2 0x91>, <&dmac2 0x90>; + dma-names = "tx", "rx", "tx", "rx"; + i2c-scl-internal-delay-ns = <110>; + status = "disabled"; + }; + + i2c1: i2c@e6508000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a77961", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe6508000 0 0x40>; + interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 930>; + power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; + resets = <&cpg 930>; + dmas = <&dmac1 0x93>, <&dmac1 0x92>, + <&dmac2 0x93>, <&dmac2 0x92>; + dma-names = "tx", "rx", "tx", "rx"; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + + i2c2: i2c@e6510000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a77961", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe6510000 0 0x40>; + interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 929>; + power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; + resets = <&cpg 929>; + dmas = <&dmac1 0x95>, <&dmac1 0x94>, + <&dmac2 0x95>, <&dmac2 0x94>; + dma-names = "tx", "rx", "tx", "rx"; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + + i2c3: i2c@e66d0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a77961", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe66d0000 0 0x40>; + interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 928>; + power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; + resets = <&cpg 928>; + dmas = <&dmac0 0x97>, <&dmac0 0x96>; + dma-names = "tx", "rx"; + i2c-scl-internal-delay-ns = <110>; + status = "disabled"; + }; + + i2c4: i2c@e66d8000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a77961", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe66d8000 0 0x40>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 927>; + power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; + resets = <&cpg 927>; + dmas = <&dmac0 0x99>, <&dmac0 0x98>; + dma-names = "tx", "rx"; + i2c-scl-internal-delay-ns = <110>; + status = "disabled"; + }; + + i2c5: i2c@e66e0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a77961", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe66e0000 0 0x40>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 919>; + power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; + resets = <&cpg 919>; + dmas = <&dmac0 0x9b>, <&dmac0 0x9a>; + dma-names = "tx", "rx"; + i2c-scl-internal-delay-ns = <110>; + status = "disabled"; + }; + + i2c6: i2c@e66e8000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a77961", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe66e8000 0 0x40>; + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 918>; + power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; + resets = <&cpg 918>; + dmas = <&dmac0 0x9d>, <&dmac0 0x9c>; + dma-names = "tx", "rx"; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + + i2c_dvfs: i2c@e60b0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,iic-r8a77961", + "renesas,rcar-gen3-iic", + "renesas,rmobile-iic"; + reg = <0 0xe60b0000 0 0x425>; + interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 926>; + power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; + resets = <&cpg 926>; + dmas = <&dmac0 0x11>, <&dmac0 0x10>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + + hscif1: serial@e6550000 { + reg = <0 0xe6550000 0 0x60>; + /* placeholder */ + }; + + hsusb: usb@e6590000 { + reg = <0 0xe6590000 0 0x200>; + /* placeholder */ + }; + + usb3_phy0: usb-phy@e65ee000 { + reg = <0 0xe65ee000 0 0x90>; + #phy-cells = <0>; + /* placeholder */ + }; + + dmac0: dma-controller@e6700000 { + compatible = "renesas,dmac-r8a77961", + "renesas,rcar-dmac"; + reg = <0 0xe6700000 0 0x10000>; + interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15"; + clocks = <&cpg CPG_MOD 219>; + clock-names = "fck"; + power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; + resets = <&cpg 219>; + #dma-cells = <1>; + dma-channels = <16>; + }; + + dmac1: dma-controller@e7300000 { + compatible = "renesas,dmac-r8a77961", + "renesas,rcar-dmac"; + reg = <0 0xe7300000 0 0x10000>; + interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15"; + clocks = <&cpg CPG_MOD 218>; + clock-names = "fck"; + power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; + resets = <&cpg 218>; + #dma-cells = <1>; + dma-channels = <16>; + }; + + dmac2: dma-controller@e7310000 { + compatible = "renesas,dmac-r8a77961", + "renesas,rcar-dmac"; + reg = <0 0xe7310000 0 0x10000>; + interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15"; + clocks = <&cpg CPG_MOD 217>; + clock-names = "fck"; + power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; + resets = <&cpg 217>; + #dma-cells = <1>; + dma-channels = <16>; + }; + + avb: ethernet@e6800000 { + compatible = "renesas,etheravb-r8a77961", + "renesas,etheravb-rcar-gen3"; + reg = <0 0xe6800000 0 0x800>, <0 0xe6a00000 0 0x10000>; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15", + "ch16", "ch17", "ch18", "ch19", + "ch20", "ch21", "ch22", "ch23", + "ch24"; + clocks = <&cpg CPG_MOD 812>; + power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; + resets = <&cpg 812>; + phy-mode = "rgmii"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + pwm1: pwm@e6e31000 { + reg = <0 0xe6e31000 0 8>; + #pwm-cells = <2>; + /* placeholder */ + }; + + scif1: serial@e6e68000 { + reg = <0 0xe6e68000 0 64>; + /* placeholder */ + }; + + scif2: serial@e6e88000 { + compatible = "renesas,scif-r8a77961", + "renesas,rcar-gen3-scif", "renesas,scif"; + reg = <0 0xe6e88000 0 64>; + interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 310>, + <&cpg CPG_CORE R8A77961_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; + resets = <&cpg 310>; + status = "disabled"; + }; + + vin0: video@e6ef0000 { + reg = <0 0xe6ef0000 0 0x1000>; + /* placeholder */ + }; + + vin1: video@e6ef1000 { + reg = <0 0xe6ef1000 0 0x1000>; + /* placeholder */ + }; + + vin2: video@e6ef2000 { + reg = <0 0xe6ef2000 0 0x1000>; + /* placeholder */ + }; + + vin3: video@e6ef3000 { + reg = <0 0xe6ef3000 0 0x1000>; + /* placeholder */ + }; + + vin4: video@e6ef4000 { + reg = <0 0xe6ef4000 0 0x1000>; + /* placeholder */ + }; + + vin5: video@e6ef5000 { + reg = <0 0xe6ef5000 0 0x1000>; + /* placeholder */ + }; + + vin6: video@e6ef6000 { + reg = <0 0xe6ef6000 0 0x1000>; + /* placeholder */ + }; + + vin7: video@e6ef7000 { + reg = <0 0xe6ef7000 0 0x1000>; + /* placeholder */ + }; + + rcar_sound: sound@ec500000 { + reg = <0 0xec500000 0 0x1000>, /* SCU */ + <0 0xec5a0000 0 0x100>, /* ADG */ + <0 0xec540000 0 0x1000>, /* SSIU */ + <0 0xec541000 0 0x280>, /* SSI */ + <0 0xec760000 0 0x200>; /* Audio DMAC peri peri*/ + /* placeholder */ + rcar_sound,dvc { + dvc0: dvc-0 { }; + dvc1: dvc-1 { }; + }; + + rcar_sound,src { + src0: src-0 { }; + src1: src-1 { }; + }; + + rcar_sound,ssi { + ssi0: ssi-0 { }; + ssi1: ssi-1 { }; + }; + }; + + xhci0: usb@ee000000 { + reg = <0 0xee000000 0 0xc00>; + /* placeholder */ + }; + + usb3_peri0: usb@ee020000 { + reg = <0 0xee020000 0 0x400>; + /* placeholder */ + }; + + ohci0: usb@ee080000 { + reg = <0 0xee080000 0 0x100>; + /* placeholder */ + }; + + ohci1: usb@ee0a0000 { + reg = <0 0xee0a0000 0 0x100>; + /* placeholder */ + }; + + ehci0: usb@ee080100 { + reg = <0 0xee080100 0 0x100>; + /* placeholder */ + }; + + ehci1: usb@ee0a0100 { + reg = <0 0xee0a0100 0 0x100>; + /* placeholder */ + }; + + usb2_phy0: usb-phy@ee080200 { + reg = <0 0xee080200 0 0x700>; + /* placeholder */ + }; + + usb2_phy1: usb-phy@ee0a0200 { + reg = <0 0xee0a0200 0 0x700>; + /* placeholder */ + }; + + sdhi0: sd@ee100000 { + compatible = "renesas,sdhi-r8a77961", + "renesas,rcar-gen3-sdhi"; + reg = <0 0xee100000 0 0x2000>; + interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 314>; + max-frequency = <200000000>; + power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; + resets = <&cpg 314>; + status = "disabled"; + }; + + sdhi1: sd@ee120000 { + compatible = "renesas,sdhi-r8a77961", + "renesas,rcar-gen3-sdhi"; + reg = <0 0xee120000 0 0x2000>; + interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 313>; + max-frequency = <200000000>; + power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; + resets = <&cpg 313>; + status = "disabled"; + }; + + sdhi2: sd@ee140000 { + compatible = "renesas,sdhi-r8a77961", + "renesas,rcar-gen3-sdhi"; + reg = <0 0xee140000 0 0x2000>; + interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 312>; + max-frequency = <200000000>; + power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; + resets = <&cpg 312>; + status = "disabled"; + }; + + sdhi3: sd@ee160000 { + compatible = "renesas,sdhi-r8a77961", + "renesas,rcar-gen3-sdhi"; + reg = <0 0xee160000 0 0x2000>; + interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 311>; + max-frequency = <200000000>; + power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; + resets = <&cpg 311>; + status = "disabled"; + }; + + gic: interrupt-controller@f1010000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0x0 0xf1010000 0 0x1000>, + <0x0 0xf1020000 0 0x20000>, + <0x0 0xf1040000 0 0x20000>, + <0x0 0xf1060000 0 0x20000>; + interrupts = <GIC_PPI 9 + (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_HIGH)>; + clocks = <&cpg CPG_MOD 408>; + clock-names = "clk"; + power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; + resets = <&cpg 408>; + }; + + pciec0: pcie@fe000000 { + reg = <0 0xfe000000 0 0x80000>; + /* placeholder */ + }; + + pciec1: pcie@ee800000 { + reg = <0 0xee800000 0 0x80000>; + /* placeholder */ + }; + + csi20: csi2@fea80000 { + reg = <0 0xfea80000 0 0x10000>; + /* placeholder */ + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + }; + }; + + csi40: csi2@feaa0000 { + reg = <0 0xfeaa0000 0 0x10000>; + /* placeholder */ + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + }; + }; + }; + + hdmi0: hdmi@fead0000 { + reg = <0 0xfead0000 0 0x10000>; + /* placeholder */ + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + }; + port@1 { + reg = <1>; + }; + port@2 { + /* HDMI sound */ + reg = <2>; + }; + }; + }; + + du: display@feb00000 { + reg = <0 0xfeb00000 0 0x70000>; + /* placeholder */ + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + du_out_rgb: endpoint { + }; + }; + port@1 { + reg = <1>; + du_out_hdmi0: endpoint { + }; + }; + port@2 { + reg = <2>; + du_out_lvds0: endpoint { + }; + }; + }; + }; + + prr: chipid@fff00044 { + compatible = "renesas,prr"; + reg = <0 0xfff00044 0 4>; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>; + }; + + /* External USB clocks - can be overridden by the board */ + usb3s0_clk: usb3s0 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + usb_extal_clk: usb_extal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a77965-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a77965-salvator-x.dts index 340a3c72b65a..660a0240eec5 100644 --- a/arch/arm64/boot/dts/renesas/r8a77965-salvator-x.dts +++ b/arch/arm64/boot/dts/renesas/r8a77965-salvator-x.dts @@ -41,9 +41,37 @@ remote-endpoint = <&hdmi0_con>; }; }; + port@2 { + reg = <2>; + dw_hdmi0_snd_in: endpoint { + remote-endpoint = <&rsnd_endpoint1>; + }; + }; }; }; &hdmi0_con { remote-endpoint = <&rcar_dw_hdmi0_out>; }; + +&rcar_sound { + ports { + rsnd_port1: port@1 { + reg = <1>; + rsnd_endpoint1: endpoint { + remote-endpoint = <&dw_hdmi0_snd_in>; + + dai-format = "i2s"; + bitclock-master = <&rsnd_endpoint1>; + frame-master = <&rsnd_endpoint1>; + + playback = <&ssi2>; + }; + }; + }; +}; + +&sound_card { + dais = <&rsnd_port0 /* ak4613 */ + &rsnd_port1>; /* HDMI0 */ +}; diff --git a/arch/arm64/boot/dts/renesas/r8a77965-salvator-xs.dts b/arch/arm64/boot/dts/renesas/r8a77965-salvator-xs.dts index f03a5e9e0c42..5cef64605464 100644 --- a/arch/arm64/boot/dts/renesas/r8a77965-salvator-xs.dts +++ b/arch/arm64/boot/dts/renesas/r8a77965-salvator-xs.dts @@ -41,6 +41,12 @@ remote-endpoint = <&hdmi0_con>; }; }; + port@2 { + reg = <2>; + dw_hdmi0_snd_in: endpoint { + remote-endpoint = <&rsnd_endpoint1>; + }; + }; }; }; @@ -57,7 +63,29 @@ }; }; +&rcar_sound { + ports { + rsnd_port1: port@1 { + reg = <1>; + rsnd_endpoint1: endpoint { + remote-endpoint = <&dw_hdmi0_snd_in>; + + dai-format = "i2s"; + bitclock-master = <&rsnd_endpoint1>; + frame-master = <&rsnd_endpoint1>; + + playback = <&ssi2>; + }; + }; + }; +}; + /* SW12-7 must be set 'Off' (MD12 set to 1) which is not the default! */ &sata { status = "okay"; }; + +&sound_card { + dais = <&rsnd_port0 /* ak4613 */ + &rsnd_port1>; /* HDMI0 */ +}; diff --git a/arch/arm64/boot/dts/renesas/r8a77965-m3nulcb-kf.dts b/arch/arm64/boot/dts/renesas/r8a77965-ulcb-kf.dts index dadad97051b9..12aa08fd6fd8 100644 --- a/arch/arm64/boot/dts/renesas/r8a77965-m3nulcb-kf.dts +++ b/arch/arm64/boot/dts/renesas/r8a77965-ulcb-kf.dts @@ -6,7 +6,7 @@ * Copyright (C) 2018 Cogent Embedded, Inc. */ -#include "r8a77965-m3nulcb.dts" +#include "r8a77965-ulcb.dts" #include "ulcb-kf.dtsi" / { diff --git a/arch/arm64/boot/dts/renesas/r8a77965-m3nulcb.dts b/arch/arm64/boot/dts/renesas/r8a77965-ulcb.dts index 964078b6cc49..964078b6cc49 100644 --- a/arch/arm64/boot/dts/renesas/r8a77965-m3nulcb.dts +++ b/arch/arm64/boot/dts/renesas/r8a77965-ulcb.dts diff --git a/arch/arm64/boot/dts/renesas/r8a77965.dtsi b/arch/arm64/boot/dts/renesas/r8a77965.dtsi index 131f895ab778..c17d90bd160e 100644 --- a/arch/arm64/boot/dts/renesas/r8a77965.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77965.dtsi @@ -429,12 +429,12 @@ #interrupt-cells = <2>; interrupt-controller; reg = <0 0xe61c0000 0 0x200>; - interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 407>; power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; resets = <&cpg 407>; @@ -680,8 +680,8 @@ compatible = "renesas,r8a77965-usb-dmac", "renesas,usb-dmac"; reg = <0 0xe65a0000 0 0x100>; - interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "ch0", "ch1"; clocks = <&cpg CPG_MOD 330>; power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; @@ -694,8 +694,8 @@ compatible = "renesas,r8a77965-usb-dmac", "renesas,usb-dmac"; reg = <0 0xe65b0000 0 0x100>; - interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "ch0", "ch1"; clocks = <&cpg CPG_MOD 331>; power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; @@ -721,23 +721,23 @@ compatible = "renesas,dmac-r8a77965", "renesas,rcar-dmac"; reg = <0 0xe6700000 0 0x10000>; - interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", @@ -763,23 +763,23 @@ compatible = "renesas,dmac-r8a77965", "renesas,rcar-dmac"; reg = <0 0xe7300000 0 0x10000>; - interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", @@ -805,23 +805,23 @@ compatible = "renesas,dmac-r8a77965", "renesas,rcar-dmac"; reg = <0 0xe7310000 0 0x10000>; - interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", @@ -1937,23 +1937,23 @@ compatible = "renesas,dmac-r8a77965", "renesas,rcar-dmac"; reg = <0 0xec700000 0 0x10000>; - interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", @@ -1971,23 +1971,23 @@ compatible = "renesas,dmac-r8a77965", "renesas,rcar-dmac"; reg = <0 0xec720000 0 0x10000>; - interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", @@ -2105,6 +2105,7 @@ max-frequency = <200000000>; power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; resets = <&cpg 314>; + iommus = <&ipmmu_ds1 32>; status = "disabled"; }; @@ -2117,6 +2118,7 @@ max-frequency = <200000000>; power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; resets = <&cpg 313>; + iommus = <&ipmmu_ds1 33>; status = "disabled"; }; @@ -2129,6 +2131,7 @@ max-frequency = <200000000>; power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; resets = <&cpg 312>; + iommus = <&ipmmu_ds1 34>; status = "disabled"; }; @@ -2141,6 +2144,7 @@ max-frequency = <200000000>; power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; resets = <&cpg 311>; + iommus = <&ipmmu_ds1 35>; status = "disabled"; }; @@ -2180,10 +2184,10 @@ #size-cells = <2>; bus-range = <0x00 0xff>; device_type = "pci"; - ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000 - 0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000 - 0x02000000 0 0x30000000 0 0x30000000 0 0x08000000 - 0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>; + ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000>, + <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>, + <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>, + <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>; /* Map all possible DDR as inbound ranges */ dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>; interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, @@ -2207,10 +2211,10 @@ #size-cells = <2>; bus-range = <0x00 0xff>; device_type = "pci"; - ranges = <0x01000000 0 0x00000000 0 0xee900000 0 0x00100000 - 0x02000000 0 0xeea00000 0 0xeea00000 0 0x00200000 - 0x02000000 0 0xc0000000 0 0xc0000000 0 0x08000000 - 0x42000000 0 0xc8000000 0 0xc8000000 0 0x08000000>; + ranges = <0x01000000 0 0x00000000 0 0xee900000 0 0x00100000>, + <0x02000000 0 0xeea00000 0 0xeea00000 0 0x00200000>, + <0x02000000 0 0xc0000000 0 0xc0000000 0 0x08000000>, + <0x42000000 0 0xc8000000 0 0xc8000000 0 0x08000000>; /* Map all possible DDR as inbound ranges */ dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>; interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, @@ -2255,14 +2259,6 @@ renesas,fcp = <&fcpvb0>; }; - fcpvb0: fcp@fe96f000 { - compatible = "renesas,fcpv"; - reg = <0 0xfe96f000 0 0x200>; - clocks = <&cpg CPG_MOD 607>; - power-domains = <&sysc R8A77965_PD_A3VP>; - resets = <&cpg 607>; - }; - vspi0: vsp@fe9a0000 { compatible = "renesas,vsp2"; reg = <0 0xfe9a0000 0 0x8000>; @@ -2274,14 +2270,6 @@ renesas,fcp = <&fcpvi0>; }; - fcpvi0: fcp@fe9af000 { - compatible = "renesas,fcpv"; - reg = <0 0xfe9af000 0 0x200>; - clocks = <&cpg CPG_MOD 611>; - power-domains = <&sysc R8A77965_PD_A3VP>; - resets = <&cpg 611>; - }; - vspd0: vsp@fea20000 { compatible = "renesas,vsp2"; reg = <0 0xfea20000 0 0x5000>; @@ -2293,14 +2281,6 @@ renesas,fcp = <&fcpvd0>; }; - fcpvd0: fcp@fea27000 { - compatible = "renesas,fcpv"; - reg = <0 0xfea27000 0 0x200>; - clocks = <&cpg CPG_MOD 603>; - power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; - resets = <&cpg 603>; - }; - vspd1: vsp@fea28000 { compatible = "renesas,vsp2"; reg = <0 0xfea28000 0 0x5000>; @@ -2312,6 +2292,22 @@ renesas,fcp = <&fcpvd1>; }; + fcpvb0: fcp@fe96f000 { + compatible = "renesas,fcpv"; + reg = <0 0xfe96f000 0 0x200>; + clocks = <&cpg CPG_MOD 607>; + power-domains = <&sysc R8A77965_PD_A3VP>; + resets = <&cpg 607>; + }; + + fcpvd0: fcp@fea27000 { + compatible = "renesas,fcpv"; + reg = <0 0xfea27000 0 0x200>; + clocks = <&cpg CPG_MOD 603>; + power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; + resets = <&cpg 603>; + }; + fcpvd1: fcp@fea2f000 { compatible = "renesas,fcpv"; reg = <0 0xfea2f000 0 0x200>; @@ -2320,6 +2316,41 @@ resets = <&cpg 602>; }; + fcpvi0: fcp@fe9af000 { + compatible = "renesas,fcpv"; + reg = <0 0xfe9af000 0 0x200>; + clocks = <&cpg CPG_MOD 611>; + power-domains = <&sysc R8A77965_PD_A3VP>; + resets = <&cpg 611>; + }; + + cmm0: cmm@fea40000 { + compatible = "renesas,r8a77965-cmm", + "renesas,rcar-gen3-cmm"; + reg = <0 0xfea40000 0 0x1000>; + power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; + clocks = <&cpg CPG_MOD 711>; + resets = <&cpg 711>; + }; + + cmm1: cmm@fea50000 { + compatible = "renesas,r8a77965-cmm", + "renesas,rcar-gen3-cmm"; + reg = <0 0xfea50000 0 0x1000>; + power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; + clocks = <&cpg CPG_MOD 710>; + resets = <&cpg 710>; + }; + + cmm3: cmm@fea70000 { + compatible = "renesas,r8a77965-cmm", + "renesas,rcar-gen3-cmm"; + reg = <0 0xfea70000 0 0x1000>; + power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; + clocks = <&cpg CPG_MOD 708>; + resets = <&cpg 708>; + }; + csi20: csi2@fea80000 { compatible = "renesas,r8a77965-csi2"; reg = <0 0xfea80000 0 0x10000>; @@ -2467,9 +2498,11 @@ <&cpg CPG_MOD 723>, <&cpg CPG_MOD 721>; clock-names = "du.0", "du.1", "du.3"; - status = "disabled"; - vsps = <&vspd0 0 &vspd1 0 &vspd0 1>; + renesas,cmms = <&cmm0>, <&cmm1>, <&cmm3>; + vsps = <&vspd0 0>, <&vspd1 0>, <&vspd0 1>; + + status = "disabled"; ports { #address-cells = <1>; diff --git a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts index 233f26fbec17..2afb91ec9c8d 100644 --- a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts +++ b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts @@ -23,10 +23,13 @@ stdout-path = "serial0:115200n8"; }; - memory@48000000 { - device_type = "memory"; - /* first 128MB is reserved for secure area. */ - reg = <0x0 0x48000000 0x0 0x38000000>; + d3p3: regulator-fixed { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; }; hdmi-out { @@ -40,15 +43,6 @@ }; }; - d3p3: regulator-fixed { - compatible = "regulator-fixed"; - regulator-name = "fixed-3.3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - regulator-always-on; - }; - lvds-decoder { compatible = "thine,thc63lvd1024"; @@ -73,6 +67,12 @@ }; }; }; + + memory@48000000 { + device_type = "memory"; + /* first 128MB is reserved for secure area. */ + reg = <0x0 0x48000000 0x0 0x38000000>; + }; }; &avb { @@ -102,6 +102,10 @@ }; }; +&du { + status = "okay"; +}; + &extal_clk { clock-frequency = <16666666>; }; @@ -157,6 +161,18 @@ }; }; +&lvds0 { + status = "okay"; + + ports { + port@1 { + lvds0_out: endpoint { + remote-endpoint = <&thc63lvd1024_in>; + }; + }; + }; +}; + &pfc { avb_pins: avb0 { groups = "avb0_mdio", "avb0_rgmii", "avb0_txcrefclk"; @@ -190,19 +206,3 @@ status = "okay"; }; - -&du { - status = "okay"; -}; - -&lvds0 { - status = "okay"; - - ports { - port@1 { - lvds0_out: endpoint { - remote-endpoint = <&thc63lvd1024_in>; - }; - }; - }; -}; diff --git a/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts b/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts index 15cc9fed2e16..d7c7b9156e08 100644 --- a/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts +++ b/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts @@ -21,6 +21,41 @@ stdout-path = "serial0:115200n8"; }; + hdmi-out { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con: endpoint { + remote-endpoint = <&adv7511_out>; + }; + }; + }; + + lvds-decoder { + compatible = "thine,thc63lvd1024"; + vcc-supply = <&vcc_d3_3v>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + thc63lvd1024_in: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + + port@2 { + reg = <2>; + thc63lvd1024_out: endpoint { + remote-endpoint = <&adv7511_in>; + }; + }; + }; + }; + memory@48000000 { device_type = "memory"; /* first 128MB is reserved for secure area. */ @@ -59,41 +94,6 @@ regulator-boot-on; regulator-always-on; }; - - lvds-decoder { - compatible = "thine,thc63lvd1024"; - vcc-supply = <&vcc_d3_3v>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - thc63lvd1024_in: endpoint { - remote-endpoint = <&lvds0_out>; - }; - }; - - port@2 { - reg = <2>; - thc63lvd1024_out: endpoint { - remote-endpoint = <&adv7511_in>; - }; - }; - }; - }; - - hdmi-out { - compatible = "hdmi-connector"; - type = "a"; - - port { - hdmi_con: endpoint { - remote-endpoint = <&adv7511_out>; - }; - }; - }; }; &avb { @@ -128,29 +128,6 @@ clock-frequency = <32768>; }; -&pfc { - avb_pins: avb0 { - groups = "avb0_mdio", "avb0_rgmii", "avb0_txcrefclk"; - function = "avb0"; - }; - - i2c0_pins: i2c0 { - groups = "i2c0"; - function = "i2c0"; - }; - - mmc_pins: mmc_3_3v { - groups = "mmc_data8", "mmc_ctrl"; - function = "mmc"; - power-source = <3300>; - }; - - scif0_pins: scif0 { - groups = "scif0_data"; - function = "scif0"; - }; -}; - &i2c0 { pinctrl-0 = <&i2c0_pins>; pinctrl-names = "default"; @@ -220,6 +197,29 @@ status = "okay"; }; +&pfc { + avb_pins: avb0 { + groups = "avb0_mdio", "avb0_rgmii", "avb0_txcrefclk"; + function = "avb0"; + }; + + i2c0_pins: i2c0 { + groups = "i2c0"; + function = "i2c0"; + }; + + mmc_pins: mmc_3_3v { + groups = "mmc_data8", "mmc_ctrl"; + function = "mmc"; + power-source = <3300>; + }; + + scif0_pins: scif0 { + groups = "scif0_data"; + function = "scif0"; + }; +}; + &scif0 { pinctrl-0 = <&scif0_pins>; pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/renesas/r8a77970.dtsi b/arch/arm64/boot/dts/renesas/r8a77970.dtsi index 5b6164d4b8e3..664a73a2cc69 100644 --- a/arch/arm64/boot/dts/renesas/r8a77970.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77970.dtsi @@ -302,8 +302,8 @@ thermal: thermal@e6190000 { compatible = "renesas,thermal-r8a77970"; - reg = <0 0xe6190000 0 0x10 - 0 0xe6190100 0 0x120>; + reg = <0 0xe6190000 0 0x10>, + <0 0xe6190100 0 0x120>; interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; @@ -318,12 +318,12 @@ #interrupt-cells = <2>; interrupt-controller; reg = <0 0xe61c0000 0 0x200>; - interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 407>; power-domains = <&sysc R8A77970_PD_ALWAYS_ON>; resets = <&cpg 407>; @@ -652,7 +652,7 @@ }; pwm3: pwm@e6e33000 { - compatible = "renesas,pwm-r8a7790", "renesas,pwm-rcar"; + compatible = "renesas,pwm-r8a77970", "renesas,pwm-rcar"; reg = <0 0xe6e33000 0 8>; #pwm-cells = <2>; clocks = <&cpg CPG_MOD 523>; @@ -933,15 +933,15 @@ compatible = "renesas,dmac-r8a77970", "renesas,rcar-dmac"; reg = <0 0xe7300000 0 0x10000>; - interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7"; @@ -961,15 +961,15 @@ compatible = "renesas,dmac-r8a77970", "renesas,rcar-dmac"; reg = <0 0xe7310000 0 0x10000>; - interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7"; @@ -1035,6 +1035,7 @@ power-domains = <&sysc R8A77970_PD_ALWAYS_ON>; resets = <&cpg 314>; max-frequency = <200000000>; + iommus = <&ipmmu_ds1 32>; status = "disabled"; }; @@ -1120,7 +1121,7 @@ clock-names = "du.0"; power-domains = <&sysc R8A77970_PD_ALWAYS_ON>; resets = <&cpg 724>; - vsps = <&vspd0>; + vsps = <&vspd0 0>; status = "disabled"; ports { @@ -1181,6 +1182,9 @@ polling-delay = <1000>; thermal-sensors = <&thermal>; + cooling-maps { + }; + trips { cpu-crit { temperature = <120000>; @@ -1188,9 +1192,6 @@ type = "critical"; }; }; - - cooling-maps { - }; }; }; diff --git a/arch/arm64/boot/dts/renesas/r8a77980-condor.dts b/arch/arm64/boot/dts/renesas/r8a77980-condor.dts index 5a7012be0d6a..3dde028e22a6 100644 --- a/arch/arm64/boot/dts/renesas/r8a77980-condor.dts +++ b/arch/arm64/boot/dts/renesas/r8a77980-condor.dts @@ -22,35 +22,20 @@ stdout-path = "serial0:115200n8"; }; - memory@48000000 { - device_type = "memory"; - /* first 128MB is reserved for secure area. */ - reg = <0 0x48000000 0 0x78000000>; - }; - - d3_3v: regulator-0 { - compatible = "regulator-fixed"; - regulator-name = "D3.3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - regulator-always-on; - }; - - vddq_vin01: regulator-1 { + d1_8v: regulator-2 { compatible = "regulator-fixed"; - regulator-name = "VDDQ_VIN01"; + regulator-name = "D1.8V"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-boot-on; regulator-always-on; }; - d1_8v: regulator-2 { + d3_3v: regulator-0 { compatible = "regulator-fixed"; - regulator-name = "D1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; + regulator-name = "D3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; regulator-boot-on; regulator-always-on; }; @@ -90,6 +75,21 @@ }; }; + memory@48000000 { + device_type = "memory"; + /* first 128MB is reserved for secure area. */ + reg = <0 0x48000000 0 0x78000000>; + }; + + vddq_vin01: regulator-1 { + compatible = "regulator-fixed"; + regulator-name = "VDDQ_VIN01"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + x1_clk: x1-clock { compatible = "fixed-clock"; #clock-cells = <0>; diff --git a/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts b/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts index dd14a41b32cd..adbfd8f07d06 100644 --- a/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts +++ b/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts @@ -22,12 +22,6 @@ stdout-path = "serial0:115200n8"; }; - memory@48000000 { - device_type = "memory"; - /* first 128MB is reserved for secure area. */ - reg = <0 0x48000000 0 0x78000000>; - }; - hdmi-out { compatible = "hdmi-connector"; type = "a"; @@ -63,6 +57,12 @@ }; }; + memory@48000000 { + device_type = "memory"; + /* first 128MB is reserved for secure area. */ + reg = <0 0x48000000 0 0x78000000>; + }; + osc1_clk: osc1-clock { compatible = "fixed-clock"; #clock-cells = <0>; diff --git a/arch/arm64/boot/dts/renesas/r8a77980.dtsi b/arch/arm64/boot/dts/renesas/r8a77980.dtsi index a901a341dcf7..b340fb469999 100644 --- a/arch/arm64/boot/dts/renesas/r8a77980.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77980.dtsi @@ -348,12 +348,12 @@ #interrupt-cells = <2>; interrupt-controller; reg = <0 0xe61c0000 0 0x200>; - interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 407>; power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; resets = <&cpg 407>; @@ -1174,23 +1174,23 @@ compatible = "renesas,dmac-r8a77980", "renesas,rcar-dmac"; reg = <0 0xe7300000 0 0x10000>; - interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", @@ -1216,23 +1216,23 @@ compatible = "renesas,dmac-r8a77980", "renesas,rcar-dmac"; reg = <0 0xe7310000 0 0x10000>; - interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 362 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 364 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 366 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 367 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 362 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 364 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 366 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 367 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", @@ -1299,9 +1299,9 @@ #iommu-cells = <1>; }; - ipmmu_vc0: mmu@fe6b0000 { + ipmmu_vc0: mmu@fe990000 { compatible = "renesas,ipmmu-r8a77980"; - reg = <0 0xfe6b0000 0 0x1000>; + reg = <0 0xfe990000 0 0x1000>; renesas,ipmmu-main = <&ipmmu_mm 12>; power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; #iommu-cells = <1>; @@ -1338,6 +1338,7 @@ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; resets = <&cpg 314>; max-frequency = <200000000>; + iommus = <&ipmmu_ds1 32>; status = "disabled"; }; @@ -1366,21 +1367,17 @@ #size-cells = <2>; bus-range = <0x00 0xff>; device_type = "pci"; - ranges = < - 0x01000000 0 0x00000000 0 0xfe100000 0 0x0100000 - 0x02000000 0 0xfe200000 0 0xfe200000 0 0x0200000 - 0x02000000 0 0x30000000 0 0x30000000 0 0x8000000 - 0x42000000 0 0x38000000 0 0x38000000 0 0x8000000 - >; - dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 - 0 0x80000000>; + ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x0100000>, + <0x02000000 0 0xfe200000 0 0xfe200000 0 0x0200000>, + <0x02000000 0 0x30000000 0 0x30000000 0 0x8000000>, + <0x42000000 0 0x38000000 0 0x38000000 0 0x8000000>; + dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>; interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic GIC_SPI 148 - IRQ_TYPE_LEVEL_HIGH>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>; clock-names = "pcie", "pcie_bus"; power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; @@ -1495,7 +1492,7 @@ clock-names = "du.0"; power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; resets = <&cpg 724>; - vsps = <&vspd0>; + vsps = <&vspd0 0>; status = "disabled"; ports { diff --git a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts index 83fc13ac3fa1..4fd2b14fbb8b 100644 --- a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts +++ b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts @@ -23,12 +23,6 @@ stdout-path = "serial0:115200n8"; }; - memory@48000000 { - device_type = "memory"; - /* first 128MB is reserved for secure area. */ - reg = <0x0 0x48000000 0x0 0x38000000>; - }; - audio_clkout: audio-clkout { /* * This is same as <&rcar_sound 0> @@ -107,36 +101,10 @@ }; }; - vga { - compatible = "vga-connector"; - - port { - vga_in: endpoint { - remote-endpoint = <&adv7123_out>; - }; - }; - }; - - vga-encoder { - compatible = "adi,adv7123"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - adv7123_in: endpoint { - remote-endpoint = <&du_out_rgb>; - }; - }; - port@1 { - reg = <1>; - adv7123_out: endpoint { - remote-endpoint = <&vga_in>; - }; - }; - }; + memory@48000000 { + device_type = "memory"; + /* first 128MB is reserved for secure area. */ + reg = <0x0 0x48000000 0x0 0x38000000>; }; reg_1p8v: regulator0 { @@ -157,15 +125,13 @@ regulator-always-on; }; - vbus0_usb2: regulator-vbus0-usb2 { + reg_12p0v: regulator2 { compatible = "regulator-fixed"; - - regulator-name = "USB20_VBUS_CN"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - - gpio = <&gpio6 4 GPIO_ACTIVE_HIGH>; - enable-active-high; + regulator-name = "D12.0V"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-boot-on; + regulator-always-on; }; rsnd_ak4613: sound { @@ -176,34 +142,24 @@ simple-audio-card,bitclock-master = <&sndcpu>; simple-audio-card,frame-master = <&sndcpu>; - sndcpu: simple-audio-card,cpu { - sound-dai = <&rcar_sound>; - }; - sndcodec: simple-audio-card,codec { sound-dai = <&ak4613>; }; - }; - x12_clk: x12 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <24576000>; + sndcpu: simple-audio-card,cpu { + sound-dai = <&rcar_sound>; + }; }; - reg_12p0v: regulator2 { + vbus0_usb2: regulator-vbus0-usb2 { compatible = "regulator-fixed"; - regulator-name = "D12.0V"; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - regulator-boot-on; - regulator-always-on; - }; - x13_clk: x13 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <74250000>; + regulator-name = "USB20_VBUS_CN"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + gpio = <&gpio6 4 GPIO_ACTIVE_HIGH>; + enable-active-high; }; vcc_sdhi0: regulator-vcc-sdhi0 { @@ -226,8 +182,7 @@ gpios = <&gpio5 18 GPIO_ACTIVE_HIGH>; gpios-states = <1>; - states = <3300000 1 - 1800000 0>; + states = <3300000 1>, <1800000 0>; }; vcc_sdhi1: regulator-vcc-sdhi1 { @@ -250,8 +205,51 @@ gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>; gpios-states = <1>; - states = <3300000 1 - 1800000 0>; + states = <3300000 1>, <1800000 0>; + }; + + vga { + compatible = "vga-connector"; + + port { + vga_in: endpoint { + remote-endpoint = <&adv7123_out>; + }; + }; + }; + + vga-encoder { + compatible = "adi,adv7123"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7123_in: endpoint { + remote-endpoint = <&du_out_rgb>; + }; + }; + port@1 { + reg = <1>; + adv7123_out: endpoint { + remote-endpoint = <&vga_in>; + }; + }; + }; + }; + + x12_clk: x12 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24576000>; + }; + + x13_clk: x13 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <74250000>; }; }; @@ -271,6 +269,14 @@ interrupt-parent = <&gpio2>; interrupts = <21 IRQ_TYPE_LEVEL_LOW>; reset-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>; + /* + * TX clock internal delay mode is required for reliable + * 1Gbps communication using the KSZ9031RNX phy present on + * the Ebisu board, however, TX clock internal delay mode + * isn't supported on r8a77990. Thus, limit speed to + * 100Mbps for reliable communication. + */ + max-speed = <100>; }; }; @@ -547,6 +553,11 @@ function = "pwm5"; }; + scif2_pins: scif2 { + groups = "scif2_data_a"; + function = "scif2"; + }; + sdhi0_pins: sd0 { groups = "sdhi0_data4", "sdhi0_ctrl"; function = "sdhi0"; @@ -577,20 +588,15 @@ power-source = <1800>; }; - sound_pins: sound { - groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data"; - function = "ssi"; - }; - sound_clk_pins: sound_clk { groups = "audio_clk_a", "audio_clk_b_a", "audio_clk_c_a", "audio_clkout_a", "audio_clkout1_a"; function = "audio_clk"; }; - scif2_pins: scif2 { - groups = "scif2_data_a"; - function = "scif2"; + sound_pins: sound { + groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data"; + function = "ssi"; }; usb0_pins: usb { @@ -628,7 +634,6 @@ /* audio_clkout0/1/2/3 */ #clock-cells = <1>; clock-frequency = <12288000 11289600>; - clkout-lr-synchronous; status = "okay"; @@ -671,38 +676,6 @@ status = "okay"; }; -&ssi1 { - shared-pin; -}; - -&usb2_phy0 { - pinctrl-0 = <&usb0_pins>; - pinctrl-names = "default"; - - vbus-supply = <&vbus0_usb2>; - status = "okay"; -}; - -&usb3_peri0 { - companion = <&xhci0>; - status = "okay"; -}; - -&vin4 { - status = "okay"; -}; - -&vin5 { - status = "okay"; -}; - -&xhci0 { - pinctrl-0 = <&usb30_pins>; - pinctrl-names = "default"; - - status = "okay"; -}; - &sdhi0 { pinctrl-0 = <&sdhi0_pins>; pinctrl-1 = <&sdhi0_pins_uhs>; @@ -746,3 +719,35 @@ non-removable; status = "okay"; }; + +&ssi1 { + shared-pin; +}; + +&usb2_phy0 { + pinctrl-0 = <&usb0_pins>; + pinctrl-names = "default"; + + vbus-supply = <&vbus0_usb2>; + status = "okay"; +}; + +&usb3_peri0 { + companion = <&xhci0>; + status = "okay"; +}; + +&vin4 { + status = "okay"; +}; + +&vin5 { + status = "okay"; +}; + +&xhci0 { + pinctrl-0 = <&usb30_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a77990.dtsi b/arch/arm64/boot/dts/renesas/r8a77990.dtsi index b4318661f35e..32d91f210246 100644 --- a/arch/arm64/boot/dts/renesas/r8a77990.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77990.dtsi @@ -394,12 +394,12 @@ #interrupt-cells = <2>; interrupt-controller; reg = <0 0xe61c0000 0 0x200>; - interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 407>; power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; resets = <&cpg 407>; @@ -643,8 +643,8 @@ compatible = "renesas,r8a77990-usb-dmac", "renesas,usb-dmac"; reg = <0 0xe65a0000 0 0x100>; - interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "ch0", "ch1"; clocks = <&cpg CPG_MOD 330>; power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; @@ -657,8 +657,8 @@ compatible = "renesas,r8a77990-usb-dmac", "renesas,usb-dmac"; reg = <0 0xe65b0000 0 0x100>; - interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "ch0", "ch1"; clocks = <&cpg CPG_MOD 331>; power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; @@ -671,23 +671,23 @@ compatible = "renesas,dmac-r8a77990", "renesas,rcar-dmac"; reg = <0 0xe6700000 0 0x10000>; - interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", @@ -713,23 +713,23 @@ compatible = "renesas,dmac-r8a77990", "renesas,rcar-dmac"; reg = <0 0xe7300000 0 0x10000>; - interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", @@ -755,23 +755,23 @@ compatible = "renesas,dmac-r8a77990", "renesas,rcar-dmac"; reg = <0 0xe7310000 0 0x10000>; - interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", @@ -1326,6 +1326,17 @@ "ssi.1", "ssi.0"; status = "disabled"; + rcar_sound,ctu { + ctu00: ctu-0 { }; + ctu01: ctu-1 { }; + ctu02: ctu-2 { }; + ctu03: ctu-3 { }; + ctu10: ctu-4 { }; + ctu11: ctu-5 { }; + ctu12: ctu-6 { }; + ctu13: ctu-7 { }; + }; + rcar_sound,dvc { dvc0: dvc-0 { dmas = <&audma0 0xbc>; @@ -1342,17 +1353,6 @@ mix1: mix-1 { }; }; - rcar_sound,ctu { - ctu00: ctu-0 { }; - ctu01: ctu-1 { }; - ctu02: ctu-2 { }; - ctu03: ctu-3 { }; - ctu10: ctu-4 { }; - ctu11: ctu-5 { }; - ctu12: ctu-6 { }; - ctu13: ctu-7 { }; - }; - rcar_sound,src { src0: src-0 { interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>; @@ -1474,23 +1474,23 @@ compatible = "renesas,dmac-r8a77990", "renesas,rcar-dmac"; reg = <0 0xec700000 0 0x10000>; - interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", @@ -1580,6 +1580,7 @@ max-frequency = <200000000>; power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; resets = <&cpg 314>; + iommus = <&ipmmu_ds1 32>; status = "disabled"; }; @@ -1592,6 +1593,7 @@ max-frequency = <200000000>; power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; resets = <&cpg 313>; + iommus = <&ipmmu_ds1 33>; status = "disabled"; }; @@ -1604,6 +1606,7 @@ max-frequency = <200000000>; power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; resets = <&cpg 311>; + iommus = <&ipmmu_ds1 35>; status = "disabled"; }; @@ -1632,10 +1635,10 @@ #size-cells = <2>; bus-range = <0x00 0xff>; device_type = "pci"; - ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000 - 0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000 - 0x02000000 0 0x30000000 0 0x30000000 0 0x08000000 - 0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>; + ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000>, + <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>, + <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>, + <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>; /* Map all possible DDR as inbound ranges */ dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x40000000>; interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, @@ -1727,6 +1730,24 @@ iommus = <&ipmmu_vi0 9>; }; + cmm0: cmm@fea40000 { + compatible = "renesas,r8a77990-cmm", + "renesas,rcar-gen3-cmm"; + reg = <0 0xfea40000 0 0x1000>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + clocks = <&cpg CPG_MOD 711>; + resets = <&cpg 711>; + }; + + cmm1: cmm@fea50000 { + compatible = "renesas,r8a77990-cmm", + "renesas,rcar-gen3-cmm"; + reg = <0 0xfea50000 0 0x1000>; + power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; + clocks = <&cpg CPG_MOD 710>; + resets = <&cpg 710>; + }; + csi40: csi2@feaa0000 { compatible = "renesas,r8a77990-csi2"; reg = <0 0xfeaa0000 0 0x10000>; @@ -1766,7 +1787,12 @@ clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>; clock-names = "du.0", "du.1"; - vsps = <&vspd0 0 &vspd1 0>; + resets = <&cpg 724>; + reset-names = "du.0"; + + renesas,cmms = <&cmm0>, <&cmm1>; + vsps = <&vspd0 0>, <&vspd1 0>; + status = "disabled"; ports { @@ -1864,25 +1890,25 @@ thermal-sensors = <&thermal 0>; sustainable-power = <717>; - trips { - target: trip-point1 { - temperature = <100000>; - hysteresis = <2000>; - type = "passive"; + cooling-maps { + map0 { + trip = <&target>; + cooling-device = <&a53_0 0 2>; + contribution = <1024>; }; + }; + trips { sensor1_crit: sensor1-crit { temperature = <120000>; hysteresis = <2000>; type = "critical"; }; - }; - cooling-maps { - map0 { - trip = <&target>; - cooling-device = <&a53_0 0 2>; - contribution = <1024>; + target: trip-point1 { + temperature = <100000>; + hysteresis = <2000>; + type = "passive"; }; }; }; diff --git a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts index 0711170b26b1..67634cb01d6b 100644 --- a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts +++ b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts @@ -19,11 +19,6 @@ ethernet0 = &avb; }; - chosen { - bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; - stdout-path = "serial0:115200n8"; - }; - backlight: backlight { compatible = "pwm-backlight"; pwms = <&pwm1 0 50000>; @@ -35,6 +30,11 @@ enable-gpios = <&gpio4 0 GPIO_ACTIVE_HIGH>; }; + chosen { + bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; + stdout-path = "serial0:115200n8"; + }; + composite-in { compatible = "composite-video-connector"; @@ -97,7 +97,7 @@ reg = <0x0 0x48000000 0x0 0x18000000>; }; - reg_1p8v: regulator0 { + reg_1p8v: regulator-1p8v { compatible = "regulator-fixed"; regulator-name = "fixed-1.8V"; regulator-min-microvolt = <1800000>; @@ -106,7 +106,7 @@ regulator-always-on; }; - reg_3p3v: regulator1 { + reg_3p3v: regulator-3p3v { compatible = "regulator-fixed"; regulator-name = "fixed-3.3V"; regulator-min-microvolt = <3300000>; @@ -115,7 +115,7 @@ regulator-always-on; }; - reg_12p0v: regulator1 { + reg_12p0v: regulator-12p0v { compatible = "regulator-fixed"; regulator-name = "D12.0V"; regulator-min-microvolt = <12000000>; @@ -175,6 +175,14 @@ reg = <0>; interrupt-parent = <&gpio5>; interrupts = <19 IRQ_TYPE_LEVEL_LOW>; + /* + * TX clock internal delay mode is required for reliable + * 1Gbps communication using the KSZ9031RNX phy present on + * the Draak board, however, TX clock internal delay mode + * isn't supported on r8a77995. Thus, limit speed to + * 100Mbps for reliable communication. + */ + max-speed = <100>; }; }; diff --git a/arch/arm64/boot/dts/renesas/r8a77995.dtsi b/arch/arm64/boot/dts/renesas/r8a77995.dtsi index 0a344eb55094..9503007c34c0 100644 --- a/arch/arm64/boot/dts/renesas/r8a77995.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77995.dtsi @@ -231,52 +231,17 @@ #interrupt-cells = <2>; interrupt-controller; reg = <0 0xe61c0000 0 0x200>; - interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 407>; power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; resets = <&cpg 407>; }; - hscif0: serial@e6540000 { - compatible = "renesas,hscif-r8a77995", - "renesas,rcar-gen3-hscif", - "renesas,hscif"; - reg = <0 0xe6540000 0 0x60>; - interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 520>, - <&cpg CPG_CORE R8A77995_CLK_S3D1C>, - <&scif_clk>; - clock-names = "fck", "brg_int", "scif_clk"; - dmas = <&dmac1 0x31>, <&dmac1 0x30>, - <&dmac2 0x31>, <&dmac2 0x30>; - dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; - resets = <&cpg 520>; - status = "disabled"; - }; - - hscif3: serial@e66a0000 { - compatible = "renesas,hscif-r8a77995", - "renesas,rcar-gen3-hscif", - "renesas,hscif"; - reg = <0 0xe66a0000 0 0x60>; - interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 517>, - <&cpg CPG_CORE R8A77995_CLK_S3D1C>, - <&scif_clk>; - clock-names = "fck", "brg_int", "scif_clk"; - dmas = <&dmac0 0x37>, <&dmac0 0x36>; - dma-names = "tx", "rx"; - power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; - resets = <&cpg 517>; - status = "disabled"; - }; - i2c0: i2c@e6500000 { #address-cells = <1>; #size-cells = <0>; @@ -344,6 +309,41 @@ status = "disabled"; }; + hscif0: serial@e6540000 { + compatible = "renesas,hscif-r8a77995", + "renesas,rcar-gen3-hscif", + "renesas,hscif"; + reg = <0 0xe6540000 0 0x60>; + interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 520>, + <&cpg CPG_CORE R8A77995_CLK_S3D1C>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x31>, <&dmac1 0x30>, + <&dmac2 0x31>, <&dmac2 0x30>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 520>; + status = "disabled"; + }; + + hscif3: serial@e66a0000 { + compatible = "renesas,hscif-r8a77995", + "renesas,rcar-gen3-hscif", + "renesas,hscif"; + reg = <0 0xe66a0000 0 0x60>; + interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 517>, + <&cpg CPG_CORE R8A77995_CLK_S3D1C>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x37>, <&dmac0 0x36>; + dma-names = "tx", "rx"; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 517>; + status = "disabled"; + }; + hsusb: usb@e6590000 { compatible = "renesas,usbhs-r8a77995", "renesas,rcar-gen3-usbhs"; @@ -365,8 +365,8 @@ compatible = "renesas,r8a77995-usb-dmac", "renesas,usb-dmac"; reg = <0 0xe65a0000 0 0x100>; - interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "ch0", "ch1"; clocks = <&cpg CPG_MOD 330>; power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; @@ -379,8 +379,8 @@ compatible = "renesas,r8a77995-usb-dmac", "renesas,usb-dmac"; reg = <0 0xe65b0000 0 0x100>; - interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "ch0", "ch1"; clocks = <&cpg CPG_MOD 331>; power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; @@ -418,15 +418,15 @@ compatible = "renesas,dmac-r8a77995", "renesas,rcar-dmac"; reg = <0 0xe6700000 0 0x10000>; - interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7"; @@ -446,15 +446,15 @@ compatible = "renesas,dmac-r8a77995", "renesas,rcar-dmac"; reg = <0 0xe7300000 0 0x10000>; - interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7"; @@ -474,15 +474,15 @@ compatible = "renesas,dmac-r8a77995", "renesas,rcar-dmac"; reg = <0 0xe7310000 0 0x10000>; - interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7"; @@ -916,6 +916,7 @@ max-frequency = <200000000>; power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; resets = <&cpg 312>; + iommus = <&ipmmu_ds1 34>; status = "disabled"; }; @@ -993,15 +994,38 @@ iommus = <&ipmmu_vi0 9>; }; + cmm0: cmm@fea40000 { + compatible = "renesas,r8a77995-cmm", + "renesas,rcar-gen3-cmm"; + reg = <0 0xfea40000 0 0x1000>; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + clocks = <&cpg CPG_MOD 711>; + resets = <&cpg 711>; + }; + + cmm1: cmm@fea50000 { + compatible = "renesas,r8a77995-cmm", + "renesas,rcar-gen3-cmm"; + reg = <0 0xfea50000 0 0x1000>; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + clocks = <&cpg CPG_MOD 710>; + resets = <&cpg 710>; + }; + du: display@feb00000 { compatible = "renesas,du-r8a77995"; - reg = <0 0xfeb00000 0 0x80000>; + reg = <0 0xfeb00000 0 0x40000>; interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>; clock-names = "du.0", "du.1"; - vsps = <&vspd0 0 &vspd1 0>; + resets = <&cpg 724>; + reset-names = "du.0"; + + renesas,cmms = <&cmm0>, <&cmm1>; + vsps = <&vspd0 0>, <&vspd1 0>; + status = "disabled"; ports { @@ -1098,6 +1122,9 @@ polling-delay = <1000>; thermal-sensors = <&thermal>; + cooling-maps { + }; + trips { cpu-crit { temperature = <120000>; @@ -1105,9 +1132,6 @@ type = "critical"; }; }; - - cooling-maps { - }; }; }; diff --git a/arch/arm64/boot/dts/renesas/rzg2-advantech-idk-1110wr-panel.dtsi b/arch/arm64/boot/dts/renesas/rzg2-advantech-idk-1110wr-panel.dtsi new file mode 100644 index 000000000000..bcc21178ae04 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/rzg2-advantech-idk-1110wr-panel.dtsi @@ -0,0 +1,41 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the Advantech idk-1110wr LVDS panel connected + * to RZ/G2 boards + * + * Copyright (C) 2019 Renesas Electronics Corp. + */ + +/ { + panel-lvds { + compatible = "advantech,idk-1110wr", "panel-lvds"; + + width-mm = <223>; + height-mm = <125>; + + data-mapping = "jeida-24"; + + panel-timing { + /* 1024x600 @60Hz */ + clock-frequency = <51200000>; + hactive = <1024>; + vactive = <600>; + hsync-len = <240>; + hfront-porch = <40>; + hback-porch = <40>; + vfront-porch = <15>; + vback-porch = <10>; + vsync-len = <10>; + }; + + port { + panel_in: endpoint { + remote-endpoint = <&lvds_connector>; + }; + }; + }; +}; + +&lvds_connector { + remote-endpoint = <&panel_in>; +}; diff --git a/arch/arm64/boot/dts/renesas/salvator-common.dtsi b/arch/arm64/boot/dts/renesas/salvator-common.dtsi index 5c2c84723ec5..98bbcafc8c0d 100644 --- a/arch/arm64/boot/dts/renesas/salvator-common.dtsi +++ b/arch/arm64/boot/dts/renesas/salvator-common.dtsi @@ -87,6 +87,28 @@ }; }; + hdmi0-out { + compatible = "hdmi-connector"; + label = "HDMI0 OUT"; + type = "a"; + + port { + hdmi0_con: endpoint { + }; + }; + }; + + hdmi1-out { + compatible = "hdmi-connector"; + label = "HDMI1 OUT"; + type = "a"; + + port { + hdmi1_con: endpoint { + }; + }; + }; + keys { compatible = "gpio-keys"; @@ -210,8 +232,7 @@ gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; gpios-states = <1>; - states = <3300000 1 - 1800000 0>; + states = <3300000 1>, <1800000 0>; }; vcc_sdhi3: regulator-vcc-sdhi3 { @@ -234,30 +255,7 @@ gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>; gpios-states = <1>; - states = <3300000 1 - 1800000 0>; - }; - - hdmi0-out { - compatible = "hdmi-connector"; - label = "HDMI0 OUT"; - type = "a"; - - port { - hdmi0_con: endpoint { - }; - }; - }; - - hdmi1-out { - compatible = "hdmi-connector"; - label = "HDMI1 OUT"; - type = "a"; - - port { - hdmi1_con: endpoint { - }; - }; + states = <3300000 1>, <1800000 0>; }; vga { @@ -462,20 +460,6 @@ #gpio-cells = <2>; }; - csa_vdd: adc@7c { - compatible = "maxim,max9611"; - reg = <0x7c>; - - shunt-resistor-micro-ohms = <5000>; - }; - - csa_dvfs: adc@7f { - compatible = "maxim,max9611"; - reg = <0x7f>; - - shunt-resistor-micro-ohms = <5000>; - }; - video-receiver@70 { compatible = "adi,adv7482"; reg = <0x70 0x71 0x72 0x73 0x74 0x75 @@ -527,6 +511,20 @@ }; }; }; + + csa_vdd: adc@7c { + compatible = "maxim,max9611"; + reg = <0x7c>; + + shunt-resistor-micro-ohms = <5000>; + }; + + csa_dvfs: adc@7f { + compatible = "maxim,max9611"; + reg = <0x7f>; + + shunt-resistor-micro-ohms = <5000>; + }; }; &i2c_dvfs { diff --git a/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi b/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi index 27851a77f538..202177706cde 100644 --- a/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi +++ b/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi @@ -83,6 +83,56 @@ }; &i2c2 { + i2cswitch2: i2c-switch@71 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x71>; + reset-gpios = <&gpio5 3 GPIO_ACTIVE_LOW>; + + /* Audio_SDA, Audio_SCL */ + i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + + pcm3168a: audio-codec@44 { + #sound-dai-cells = <0>; + compatible = "ti,pcm3168a"; + reg = <0x44>; + clocks = <&clksndsel>; + clock-names = "scki"; + + VDD1-supply = <&snd_3p3v>; + VDD2-supply = <&snd_3p3v>; + VCCAD1-supply = <&snd_vcc5v>; + VCCAD2-supply = <&snd_vcc5v>; + VCCDA1-supply = <&snd_vcc5v>; + VCCDA2-supply = <&snd_vcc5v>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + mclk-fs = <512>; + port@0 { + reg = <0>; + pcm3168a_endpoint_p: endpoint { + remote-endpoint = <&rsnd_for_pcm3168a_play>; + clocks = <&clksndsel>; + }; + }; + port@1 { + reg = <1>; + pcm3168a_endpoint_c: endpoint { + remote-endpoint = <&rsnd_for_pcm3168a_capture>; + clocks = <&clksndsel>; + }; + }; + }; + }; + }; + }; + /* U11 */ gpio_exp_74: gpio@74 { compatible = "ti,tca9539"; @@ -100,13 +150,6 @@ line-name = "Audio_Out_OFF"; }; - sd-wifi-mux { - gpio-hog; - gpios = <5 GPIO_ACTIVE_HIGH>; - output-low; /* Connect WL1837 */ - line-name = "SD WiFi mux"; - }; - hub_pwen { gpio-hog; gpios = <6 GPIO_ACTIVE_HIGH>; @@ -121,6 +164,13 @@ line-name = "HUB rst"; }; + otg_extlpn { + gpio-hog; + gpios = <9 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "OTG EXTLPn"; + }; + otg_offvbusn { gpio-hog; gpios = <8 GPIO_ACTIVE_HIGH>; @@ -128,11 +178,11 @@ line-name = "OTG OFFVBUSn"; }; - otg_extlpn { + sd-wifi-mux { gpio-hog; - gpios = <9 GPIO_ACTIVE_HIGH>; - output-high; - line-name = "OTG EXTLPn"; + gpios = <5 GPIO_ACTIVE_HIGH>; + output-low; /* Connect WL1837 */ + line-name = "SD WiFi mux"; }; snd_rst { @@ -153,59 +203,17 @@ interrupt-parent = <&gpio6>; interrupts = <4 IRQ_TYPE_EDGE_FALLING>; }; +}; - i2cswitch2: i2c-switch@71 { +&i2c4 { + i2cswitch4: i2c-switch@71 { compatible = "nxp,pca9548"; #address-cells = <1>; #size-cells = <0>; reg = <0x71>; - reset-gpios = <&gpio5 3 GPIO_ACTIVE_LOW>; - - /* Audio_SDA, Audio_SCL */ - i2c@7 { - #address-cells = <1>; - #size-cells = <0>; - reg = <7>; - - pcm3168a: audio-codec@44 { - #sound-dai-cells = <0>; - compatible = "ti,pcm3168a"; - reg = <0x44>; - clocks = <&clksndsel>; - clock-names = "scki"; - - VDD1-supply = <&snd_3p3v>; - VDD2-supply = <&snd_3p3v>; - VCCAD1-supply = <&snd_vcc5v>; - VCCAD2-supply = <&snd_vcc5v>; - VCCDA1-supply = <&snd_vcc5v>; - VCCDA2-supply = <&snd_vcc5v>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - mclk-fs = <512>; - port@0 { - reg = <0>; - pcm3168a_endpoint_p: endpoint { - remote-endpoint = <&rsnd_for_pcm3168a_play>; - clocks = <&clksndsel>; - }; - }; - port@1 { - reg = <1>; - pcm3168a_endpoint_c: endpoint { - remote-endpoint = <&rsnd_for_pcm3168a_capture>; - clocks = <&clksndsel>; - }; - }; - }; - }; - }; + reset-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>; }; -}; -&i2c4 { gpio_exp_76: gpio@76 { compatible = "ti,tca9539"; reg = <0x76>; @@ -225,14 +233,6 @@ interrupt-parent = <&gpio5>; interrupts = <9 IRQ_TYPE_EDGE_FALLING>; }; - - i2cswitch4: i2c-switch@71 { - compatible = "nxp,pca9548"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x71>; - reset-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>; - }; }; &ohci0 { @@ -279,14 +279,50 @@ power-source = <3300>; }; + sound_pcm_pins: sound-pcm { + groups = "ssi349_ctrl", "ssi3_data", "ssi4_data"; + function = "ssi"; + }; + usb0_pins: usb0 { groups = "usb0"; function = "usb0"; }; +}; - sound_pcm_pins: sound-pcm { - groups = "ssi349_ctrl", "ssi3_data", "ssi4_data"; - function = "ssi"; +&rcar_sound { + pinctrl-0 = <&sound_pins + &sound_clk_pins + &sound_pcm_pins>; + + ports { + /* rsnd_port0/1 are on salvator-common */ + rsnd_port2: port@2 { + reg = <2>; + rsnd_for_pcm3168a_play: endpoint { + remote-endpoint = <&pcm3168a_endpoint_p>; + + dai-format = "i2s"; + bitclock-master = <&rsnd_for_pcm3168a_play>; + frame-master = <&rsnd_for_pcm3168a_play>; + dai-tdm-slot-num = <8>; + + playback = <&ssi3>; + }; + }; + rsnd_port3: port@3 { + reg = <3>; + rsnd_for_pcm3168a_capture: endpoint { + remote-endpoint = <&pcm3168a_endpoint_c>; + + dai-format = "i2s"; + bitclock-master = <&rsnd_for_pcm3168a_capture>; + frame-master = <&rsnd_for_pcm3168a_capture>; + dai-tdm-slot-num = <6>; + + capture = <&ssi4>; + }; + }; }; }; @@ -322,17 +358,6 @@ }; }; -&usb2_phy0 { - pinctrl-0 = <&usb0_pins>; - pinctrl-names = "default"; - - status = "okay"; -}; - -&xhci0 { - status = "okay"; -}; - &sound_card { dais = <&rsnd_port0 /* ak4613 */ &rsnd_port1 /* HDMI0 */ @@ -341,42 +366,17 @@ >; }; -&rcar_sound { - pinctrl-0 = <&sound_pins - &sound_clk_pins - &sound_pcm_pins>; - - ports { - /* rsnd_port0/1 are on salvator-common */ - rsnd_port2: port@2 { - reg = <2>; - rsnd_for_pcm3168a_play: endpoint { - remote-endpoint = <&pcm3168a_endpoint_p>; - - dai-format = "i2s"; - bitclock-master = <&rsnd_for_pcm3168a_play>; - frame-master = <&rsnd_for_pcm3168a_play>; - dai-tdm-slot-num = <8>; - - playback = <&ssi3>; - }; - }; - rsnd_port3: port@3 { - reg = <3>; - rsnd_for_pcm3168a_capture: endpoint { - remote-endpoint = <&pcm3168a_endpoint_c>; +&ssi4 { + shared-pin; +}; - dai-format = "i2s"; - bitclock-master = <&rsnd_for_pcm3168a_capture>; - frame-master = <&rsnd_for_pcm3168a_capture>; - dai-tdm-slot-num = <6>; +&usb2_phy0 { + pinctrl-0 = <&usb0_pins>; + pinctrl-names = "default"; - capture = <&ssi4>; - }; - }; - }; + status = "okay"; }; -&ssi4 { - shared-pin; +&xhci0 { + status = "okay"; }; diff --git a/arch/arm64/boot/dts/renesas/ulcb.dtsi b/arch/arm64/boot/dts/renesas/ulcb.dtsi index 7e498b46e9ae..ff88af8e39d3 100644 --- a/arch/arm64/boot/dts/renesas/ulcb.dtsi +++ b/arch/arm64/boot/dts/renesas/ulcb.dtsi @@ -120,8 +120,7 @@ gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; gpios-states = <1>; - states = <3300000 1 - 1800000 0>; + states = <3300000 1>, <1800000 0>; }; x12_clk: x12 { @@ -428,6 +427,11 @@ }; }; +&rwdt { + timeout-sec = <60>; + status = "okay"; +}; + &scif2 { pinctrl-0 = <&scif2_pins>; pinctrl-names = "default"; @@ -478,8 +482,3 @@ status = "okay"; }; - -&rwdt { - timeout-sec = <60>; - status = "okay"; -}; diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile index daa2c78e22c3..60d9437096c7 100644 --- a/arch/arm64/boot/dts/rockchip/Makefile +++ b/arch/arm64/boot/dts/rockchip/Makefile @@ -1,5 +1,8 @@ # SPDX-License-Identifier: GPL-2.0 dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-evb.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-evb.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-roc-cc.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-a1.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-evb.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-rock64.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-roc-cc.dtb @@ -20,14 +23,18 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-hugsun-x99.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-khadas-edge.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-khadas-edge-captain.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-khadas-edge-v.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-leez-p710.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopc-t4.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopi-m4.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopi-neo4.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-orangepi.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-puma-haikou.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-roc-pc.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-roc-pc-mezzanine.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock-pi-4.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock960.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rockpro64-v2.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rockpro64.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire-excavator.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399pro-rock-pi-n10.dtb diff --git a/arch/arm64/boot/dts/rockchip/px30-evb.dts b/arch/arm64/boot/dts/rockchip/px30-evb.dts index 6eb7407a84aa..0a680257d9c2 100644 --- a/arch/arm64/boot/dts/rockchip/px30-evb.dts +++ b/arch/arm64/boot/dts/rockchip/px30-evb.dts @@ -14,7 +14,7 @@ compatible = "rockchip,px30-evb", "rockchip,px30"; chosen { - stdout-path = "serial2:1500000n8"; + stdout-path = "serial5:115200n8"; }; adc-keys { @@ -58,6 +58,14 @@ backlight: backlight { compatible = "pwm-backlight"; pwms = <&pwm1 0 25000 0>; + power-supply = <&vcc3v3_lcd>; + }; + + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + pinctrl-0 = <&emmc_reset>; + pinctrl-names = "default"; + reset-gpios = <&gpio1 RK_PB3 GPIO_ACTIVE_HIGH>; }; sdio_pwrseq: sdio-pwrseq { @@ -74,13 +82,6 @@ reset-gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>; /* GPIO3_A4 */ }; - vcc_phy: vcc-phy-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcc_phy"; - regulator-always-on; - regulator-boot-on; - }; - vcc5v0_sys: vccsys { compatible = "regulator-fixed"; regulator-name = "vcc5v0_sys"; @@ -91,29 +92,335 @@ }; }; +&cpu0 { + cpu-supply = <&vdd_arm>; +}; + +&cpu1 { + cpu-supply = <&vdd_arm>; +}; + +&cpu2 { + cpu-supply = <&vdd_arm>; +}; + +&cpu3 { + cpu-supply = <&vdd_arm>; +}; + &display_subsystem { status = "okay"; }; +&dsi { + status = "okay"; + + ports { + mipi_out: port@1 { + reg = <1>; + + mipi_out_panel: endpoint { + remote-endpoint = <&mipi_in_panel>; + }; + }; + }; + + panel@0 { + compatible = "xinpeng,xpp055c272"; + reg = <0>; + backlight = <&backlight>; + iovcc-supply = <&vcc_1v8>; + vci-supply = <&vcc3v3_lcd>; + + port { + mipi_in_panel: endpoint { + remote-endpoint = <&mipi_out_panel>; + }; + }; + }; +}; + +&dsi_dphy { + status = "okay"; +}; + &emmc { bus-width = <8>; cap-mmc-highspeed; mmc-hs200-1_8v; non-removable; + mmc-pwrseq = <&emmc_pwrseq>; + vmmc-supply = <&vcc_3v0>; + vqmmc-supply = <&vccio_flash>; status = "okay"; }; &gmac { clock_in_out = "output"; - phy-supply = <&vcc_phy>; + phy-supply = <&vcc_rmii>; snps,reset-gpio = <&gpio2 13 GPIO_ACTIVE_LOW>; snps,reset-active-low; snps,reset-delays-us = <0 50000 50000>; status = "okay"; }; +&gpu { + mali-supply = <&vdd_log>; + status = "okay"; +}; + &i2c0 { status = "okay"; + + rk809: pmic@20 { + compatible = "rockchip,rk809"; + reg = <0x20>; + interrupt-parent = <&gpio0>; + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int>; + rockchip,system-power-controller; + wakeup-source; + #clock-cells = <0>; + clock-output-names = "xin32k"; + + vcc1-supply = <&vcc5v0_sys>; + vcc2-supply = <&vcc5v0_sys>; + vcc3-supply = <&vcc5v0_sys>; + vcc4-supply = <&vcc5v0_sys>; + vcc5-supply = <&vcc3v3_sys>; + vcc6-supply = <&vcc3v3_sys>; + vcc7-supply = <&vcc3v3_sys>; + vcc8-supply = <&vcc3v3_sys>; + vcc9-supply = <&vcc5v0_sys>; + + regulators { + vdd_log: DCDC_REG1 { + regulator-name = "vdd_log"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <950000>; + }; + }; + + vdd_arm: DCDC_REG2 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <950000>; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_3v0: vcc_rmii: DCDC_REG4 { + regulator-name = "vcc_3v0"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3000000>; + }; + }; + + vcc3v3_sys: DCDC_REG5 { + regulator-name = "vcc3v3_sys"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc_1v0: LDO_REG1 { + regulator-name = "vcc_1v0"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + + vcc_1v8: vccio_flash: vccio_sdio: LDO_REG2 { + regulator-name = "vcc_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd_1v0: LDO_REG3 { + regulator-name = "vdd_1v0"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + + vcc3v0_pmu: LDO_REG4 { + regulator-name = "vcc3v0_pmu"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3000000>; + }; + }; + + vccio_sd: LDO_REG5 { + regulator-name = "vccio_sd"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc_sd: LDO_REG6 { + regulator-name = "vcc_sd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc2v8_dvp: LDO_REG7 { + regulator-name = "vcc2v8_dvp"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <2800000>; + }; + }; + + vcc1v8_dvp: LDO_REG8 { + regulator-name = "vcc1v8_dvp"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc1v5_dvp: LDO_REG9 { + regulator-name = "vcc1v5_dvp"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <1500000>; + }; + }; + + vcc3v3_lcd: SWITCH_REG1 { + regulator-name = "vcc3v3_lcd"; + regulator-boot-on; + }; + + vcc5v0_host: SWITCH_REG2 { + regulator-name = "vcc5v0_host"; + regulator-always-on; + regulator-boot-on; + }; + }; + }; +}; + +&i2c1 { + status = "okay"; + + sensor@d { + compatible = "asahi-kasei,ak8963"; + reg = <0x0d>; + gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>; + vdd-supply = <&vcc3v0_pmu>; + mount-matrix = "1", /* x0 */ + "0", /* y0 */ + "0", /* z0 */ + "0", /* x1 */ + "1", /* y1 */ + "0", /* z1 */ + "0", /* x2 */ + "0", /* y2 */ + "1"; /* z2 */ + }; + + touchscreen@14 { + compatible = "goodix,gt1151"; + reg = <0x14>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PA5 IRQ_TYPE_LEVEL_LOW>; + irq-gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; + reset-gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>; + VDDIO-supply = <&vcc3v3_lcd>; + }; + + sensor@4c { + compatible = "fsl,mma7660"; + reg = <0x4c>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PB7 IRQ_TYPE_LEVEL_LOW>; + }; }; &i2s1_2ch { @@ -122,6 +429,13 @@ &io_domains { status = "okay"; + + vccio1-supply = <&vccio_sdio>; + vccio2-supply = <&vccio_sd>; + vccio3-supply = <&vcc_3v0>; + vccio4-supply = <&vcc3v0_pmu>; + vccio5-supply = <&vcc_3v0>; + vccio6-supply = <&vccio_flash>; }; &pinctrl { @@ -132,6 +446,12 @@ }; }; + emmc { + emmc_reset: emmc-reset { + rockchip,pins = <1 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + pmic { pmic_int: pmic_int { rockchip,pins = @@ -164,6 +484,9 @@ &pmu_io_domains { status = "okay"; + + pmuio1-supply = <&vcc3v0_pmu>; + pmuio2-supply = <&vcc3v0_pmu>; }; &pwm1 { @@ -171,6 +494,7 @@ }; &saradc { + vref-supply = <&vcc_1v8>; status = "okay"; }; @@ -183,6 +507,8 @@ sd-uhs-sdr25; sd-uhs-sdr50; sd-uhs-sdr104; + vmmc-supply = <&vcc_sd>; + vqmmc-supply = <&vccio_sd>; status = "okay"; }; @@ -196,13 +522,31 @@ status = "okay"; }; +&tsadc { + rockchip,hw-tshut-mode = <1>; + rockchip,hw-tshut-polarity = <1>; + status = "okay"; +}; + +&u2phy { + status = "okay"; + + u2phy_host: host-port { + status = "okay"; + }; + + u2phy_otg: otg-port { + status = "okay"; + }; +}; + &uart1 { pinctrl-names = "default"; pinctrl-0 = <&uart1_xfer &uart1_cts>; status = "okay"; }; -&uart2 { +&uart5 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/px30.dtsi b/arch/arm64/boot/dts/rockchip/px30.dtsi index eb992d60e6ba..75908c587511 100644 --- a/arch/arm64/boot/dts/rockchip/px30.dtsi +++ b/arch/arm64/boot/dts/rockchip/px30.dtsi @@ -10,6 +10,7 @@ #include <dt-bindings/pinctrl/rockchip.h> #include <dt-bindings/power/px30-power.h> #include <dt-bindings/soc/rockchip,boot-mode.h> +#include <dt-bindings/thermal/thermal.h> / { compatible = "rockchip,px30"; @@ -113,16 +114,11 @@ compatible = "operating-points-v2"; opp-shared; - opp-408000000 { - opp-hz = /bits/ 64 <408000000>; - opp-microvolt = <950000 950000 1350000>; - clock-latency-ns = <40000>; - opp-suspend; - }; opp-600000000 { opp-hz = /bits/ 64 <600000000>; opp-microvolt = <950000 950000 1350000>; clock-latency-ns = <40000>; + opp-suspend; }; opp-816000000 { opp-hz = /bits/ 64 <816000000>; @@ -161,13 +157,6 @@ status = "disabled"; }; - firmware { - optee { - compatible = "linaro,optee-tz"; - method = "smc"; - }; - }; - gmac_clkin: external-gmac-clock { compatible = "fixed-clock"; clock-frequency = <50000000>; @@ -188,6 +177,55 @@ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; }; + thermal_zones: thermal-zones { + soc_thermal: soc-thermal { + polling-delay-passive = <20>; + polling-delay = <1000>; + sustainable-power = <750>; + thermal-sensors = <&tsadc 0>; + + trips { + threshold: trip-point-0 { + temperature = <70000>; + hysteresis = <2000>; + type = "passive"; + }; + + target: trip-point-1 { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + soc_crit: soc-crit { + temperature = <115000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&target>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + contribution = <4096>; + }; + + map1 { + trip = <&target>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + contribution = <4096>; + }; + }; + }; + + gpu_thermal: gpu-thermal { + polling-delay-passive = <100>; /* milliseconds */ + polling-delay = <1000>; /* milliseconds */ + thermal-sensors = <&tsadc 1>; + }; + }; + xin24m: xin24m { compatible = "fixed-clock"; #clock-cells = <0>; @@ -195,13 +233,6 @@ clock-output-names = "xin24m"; }; - xin32k: xin32k { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <32768>; - clock-output-names = "xin32k"; - }; - pmu: power-management@ff000000 { compatible = "rockchip,px30-pmu", "syscon", "simple-mfd"; reg = <0x0 0xff000000 0x0 0x1000>; @@ -379,6 +410,33 @@ compatible = "rockchip,px30-io-voltage-domain"; status = "disabled"; }; + + lvds: lvds { + compatible = "rockchip,px30-lvds"; + #address-cells = <1>; + #size-cells = <0>; + phys = <&dsi_dphy>; + phy-names = "dphy"; + rockchip,grf = <&grf>; + rockchip,output = "lvds"; + status = "disabled"; + + port@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + lvds_vopb_in: endpoint@0 { + reg = <0>; + remote-endpoint = <&vopb_out_lvds>; + }; + + lvds_vopl_in: endpoint@1 { + reg = <1>; + remote-endpoint = <&vopl_out_lvds>; + }; + }; + }; }; uart1: serial@ff158000 { @@ -659,6 +717,26 @@ }; }; + tsadc: tsadc@ff280000 { + compatible = "rockchip,px30-tsadc"; + reg = <0x0 0xff280000 0x0 0x100>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + assigned-clocks = <&cru SCLK_TSADC>; + assigned-clock-rates = <50000>; + clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>; + clock-names = "tsadc", "apb_pclk"; + resets = <&cru SRST_TSADC>; + reset-names = "tsadc-apb"; + rockchip,grf = <&grf>; + rockchip,hw-tshut-temp = <120000>; + pinctrl-names = "init", "default", "sleep"; + pinctrl-0 = <&tsadc_otp_gpio>; + pinctrl-1 = <&tsadc_otp_out>; + pinctrl-2 = <&tsadc_otp_gpio>; + #thermal-sensor-cells = <1>; + status = "disabled"; + }; + saradc: saradc@ff288000 { compatible = "rockchip,px30-saradc", "rockchip,rk3399-saradc"; reg = <0x0 0xff288000 0x0 0x100>; @@ -671,36 +749,114 @@ status = "disabled"; }; + otp: nvmem@ff290000 { + compatible = "rockchip,px30-otp"; + reg = <0x0 0xff290000 0x0 0x4000>; + clocks = <&cru SCLK_OTP_USR>, <&cru PCLK_OTP_NS>, + <&cru PCLK_OTP_PHY>; + clock-names = "otp", "apb_pclk", "phy"; + resets = <&cru SRST_OTP_PHY>; + reset-names = "phy"; + #address-cells = <1>; + #size-cells = <1>; + + /* Data cells */ + cpu_id: id@7 { + reg = <0x07 0x10>; + }; + cpu_leakage: cpu-leakage@17 { + reg = <0x17 0x1>; + }; + performance: performance@1e { + reg = <0x1e 0x1>; + bits = <4 3>; + }; + }; + cru: clock-controller@ff2b0000 { compatible = "rockchip,px30-cru"; reg = <0x0 0xff2b0000 0x0 0x1000>; + clocks = <&xin24m>, <&pmucru PLL_GPLL>; + clock-names = "xin24m", "gpll"; rockchip,grf = <&grf>; #clock-cells = <1>; #reset-cells = <1>; - assigned-clocks = <&cru PLL_NPLL>; - assigned-clock-rates = <1188000000>; + assigned-clocks = <&cru PLL_NPLL>, + <&cru ACLK_BUS_PRE>, <&cru ACLK_PERI_PRE>, + <&cru HCLK_BUS_PRE>, <&cru HCLK_PERI_PRE>, + <&cru PCLK_BUS_PRE>, <&cru SCLK_GPU>; + + assigned-clock-rates = <1188000000>, + <200000000>, <200000000>, + <150000000>, <150000000>, + <100000000>, <200000000>; }; pmucru: clock-controller@ff2bc000 { compatible = "rockchip,px30-pmucru"; reg = <0x0 0xff2bc000 0x0 0x1000>; + clocks = <&xin24m>; + clock-names = "xin24m"; rockchip,grf = <&grf>; #clock-cells = <1>; #reset-cells = <1>; assigned-clocks = <&pmucru PLL_GPLL>, <&pmucru PCLK_PMU_PRE>, - <&pmucru SCLK_WIFI_PMU>, <&cru ARMCLK>, - <&cru ACLK_BUS_PRE>, <&cru ACLK_PERI_PRE>, - <&cru HCLK_BUS_PRE>, <&cru HCLK_PERI_PRE>, - <&cru PCLK_BUS_PRE>, <&cru SCLK_GPU>; + <&pmucru SCLK_WIFI_PMU>; assigned-clock-rates = <1200000000>, <100000000>, - <26000000>, <600000000>, - <200000000>, <200000000>, - <150000000>, <150000000>, - <100000000>, <200000000>; + <26000000>; + }; + + usb2phy_grf: syscon@ff2c0000 { + compatible = "rockchip,px30-usb2phy-grf", "syscon", + "simple-mfd"; + reg = <0x0 0xff2c0000 0x0 0x10000>; + #address-cells = <1>; + #size-cells = <1>; + + u2phy: usb2-phy@100 { + compatible = "rockchip,px30-usb2phy"; + reg = <0x100 0x20>; + clocks = <&pmucru SCLK_USBPHY_REF>; + clock-names = "phyclk"; + #clock-cells = <0>; + assigned-clocks = <&cru USB480M>; + assigned-clock-parents = <&u2phy>; + clock-output-names = "usb480m_phy"; + status = "disabled"; + + u2phy_host: host-port { + #phy-cells = <0>; + interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "linestate"; + status = "disabled"; + }; + + u2phy_otg: otg-port { + #phy-cells = <0>; + interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "otg-bvalid", "otg-id", + "linestate"; + status = "disabled"; + }; + }; + }; + + dsi_dphy: phy@ff2e0000 { + compatible = "rockchip,px30-dsi-dphy"; + reg = <0x0 0xff2e0000 0x0 0x10000>; + clocks = <&pmucru SCLK_MIPIDSIPHY_REF>, <&cru PCLK_MIPIDSIPHY>; + clock-names = "ref", "pclk"; + resets = <&cru SRST_MIPIDSIPHY_P>; + reset-names = "apb"; + #phy-cells = <0>; + power-domains = <&power PX30_PD_VO>; + status = "disabled"; }; usb20_otg: usb@ff300000 { @@ -715,6 +871,8 @@ g-rx-fifo-size = <280>; g-tx-fifo-size = <256 128 128 64 32 16>; g-use-dma; + phys = <&u2phy_otg>; + phy-names = "usb2-phy"; power-domains = <&power PX30_PD_USB>; status = "disabled"; }; @@ -725,6 +883,8 @@ interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru HCLK_HOST>; clock-names = "usbhost"; + phys = <&u2phy_host>; + phy-names = "usb"; power-domains = <&power PX30_PD_USB>; status = "disabled"; }; @@ -735,6 +895,8 @@ interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru HCLK_HOST>; clock-names = "usbhost"; + phys = <&u2phy_host>; + phy-names = "usb"; power-domains = <&power PX30_PD_USB>; status = "disabled"; }; @@ -762,13 +924,13 @@ status = "disabled"; }; - sdmmc: dwmmc@ff370000 { + sdmmc: mmc@ff370000 { compatible = "rockchip,px30-dw-mshc", "rockchip,rk3288-dw-mshc"; reg = <0x0 0xff370000 0x0 0x4000>; interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>, <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>; - clock-names = "biu", "ciu", "ciu-drv", "ciu-sample"; + clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; fifo-depth = <0x100>; max-frequency = <150000000>; pinctrl-names = "default"; @@ -777,13 +939,13 @@ status = "disabled"; }; - sdio: dwmmc@ff380000 { + sdio: mmc@ff380000 { compatible = "rockchip,px30-dw-mshc", "rockchip,rk3288-dw-mshc"; reg = <0x0 0xff380000 0x0 0x4000>; interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>, <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>; - clock-names = "biu", "ciu", "ciu-drv", "ciu-sample"; + clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; fifo-depth = <0x100>; max-frequency = <150000000>; pinctrl-names = "default"; @@ -792,19 +954,72 @@ status = "disabled"; }; - emmc: dwmmc@ff390000 { + emmc: mmc@ff390000 { compatible = "rockchip,px30-dw-mshc", "rockchip,rk3288-dw-mshc"; reg = <0x0 0xff390000 0x0 0x4000>; interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>, <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>; - clock-names = "biu", "ciu", "ciu-drv", "ciu-sample"; + clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; fifo-depth = <0x100>; max-frequency = <150000000>; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>; power-domains = <&power PX30_PD_MMC_NAND>; status = "disabled"; }; + gpu: gpu@ff400000 { + compatible = "rockchip,px30-mali", "arm,mali-bifrost"; + reg = <0x0 0xff400000 0x0 0x4000>; + interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "job", "mmu", "gpu"; + clocks = <&cru SCLK_GPU>; + #cooling-cells = <2>; + power-domains = <&power PX30_PD_GPU>; + status = "disabled"; + }; + + dsi: dsi@ff450000 { + compatible = "rockchip,px30-mipi-dsi"; + reg = <0x0 0xff450000 0x0 0x10000>; + interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_MIPI_DSI>; + clock-names = "pclk"; + phys = <&dsi_dphy>; + phy-names = "dphy"; + power-domains = <&power PX30_PD_VO>; + resets = <&cru SRST_MIPIDSI_HOST_P>; + reset-names = "apb"; + rockchip,grf = <&grf>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + dsi_in_vopb: endpoint@0 { + reg = <0>; + remote-endpoint = <&vopb_out_dsi>; + }; + + dsi_in_vopl: endpoint@1 { + reg = <1>; + remote-endpoint = <&vopl_out_dsi>; + }; + }; + }; + }; + vopb: vop@ff460000 { compatible = "rockchip,px30-vop-big"; reg = <0x0 0xff460000 0x0 0xefc>; @@ -822,6 +1037,16 @@ vopb_out: port { #address-cells = <1>; #size-cells = <0>; + + vopb_out_dsi: endpoint@0 { + reg = <0>; + remote-endpoint = <&dsi_in_vopb>; + }; + + vopb_out_lvds: endpoint@1 { + reg = <1>; + remote-endpoint = <&lvds_vopb_in>; + }; }; }; @@ -831,7 +1056,7 @@ interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "vopb_mmu"; clocks = <&cru ACLK_VOPB>, <&cru HCLK_VOPB>; - clock-names = "aclk", "hclk"; + clock-names = "aclk", "iface"; power-domains = <&power PX30_PD_VO>; #iommu-cells = <0>; status = "disabled"; @@ -854,6 +1079,16 @@ vopl_out: port { #address-cells = <1>; #size-cells = <0>; + + vopl_out_dsi: endpoint@0 { + reg = <0>; + remote-endpoint = <&dsi_in_vopl>; + }; + + vopl_out_lvds: endpoint@1 { + reg = <1>; + remote-endpoint = <&lvds_vopl_in>; + }; }; }; @@ -863,7 +1098,7 @@ interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "vopl_mmu"; clocks = <&cru ACLK_VOPL>, <&cru HCLK_VOPL>; - clock-names = "aclk", "hclk"; + clock-names = "aclk", "iface"; power-domains = <&power PX30_PD_VO>; #iommu-cells = <0>; status = "disabled"; @@ -1164,11 +1399,6 @@ rockchip,pins = <0 RK_PB5 1 &pcfg_pull_none>; }; - - uart0_rts_gpio: uart0-rts-gpio { - rockchip,pins = - <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; - }; }; uart1 { @@ -1187,11 +1417,6 @@ rockchip,pins = <1 RK_PC3 1 &pcfg_pull_none>; }; - - uart1_rts_gpio: uart1-rts-gpio { - rockchip,pins = - <1 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>; - }; }; uart2-m0 { @@ -1226,11 +1451,6 @@ rockchip,pins = <0 RK_PC3 2 &pcfg_pull_none>; }; - - uart3m0_rts_gpio: uart3m0-rts-gpio { - rockchip,pins = - <0 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>; - }; }; uart3-m1 { @@ -1249,11 +1469,6 @@ rockchip,pins = <1 RK_PB5 2 &pcfg_pull_none>; }; - - uart3m1_rts_gpio: uart3m1-rts-gpio { - rockchip,pins = - <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; - }; }; uart4 { @@ -1602,16 +1817,6 @@ <1 RK_PD4 1 &pcfg_pull_up_8ma>, <1 RK_PD5 1 &pcfg_pull_up_8ma>; }; - - sdmmc_gpio: sdmmc-gpio { - rockchip,pins = - <1 RK_PD2 RK_FUNC_GPIO &pcfg_pull_up_4ma>, - <1 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up_4ma>, - <1 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up_4ma>, - <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_up_4ma>, - <1 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up_4ma>, - <1 RK_PD7 RK_FUNC_GPIO &pcfg_pull_up_4ma>; - }; }; sdio { @@ -1632,16 +1837,6 @@ <1 RK_PD0 1 &pcfg_pull_up>, <1 RK_PD1 1 &pcfg_pull_up>; }; - - sdio_gpio: sdio-gpio { - rockchip,pins = - <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>, - <1 RK_PC7 RK_FUNC_GPIO &pcfg_pull_up>, - <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_up>, - <1 RK_PD1 RK_FUNC_GPIO &pcfg_pull_up>, - <1 RK_PC4 RK_FUNC_GPIO &pcfg_pull_up>, - <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; - }; }; emmc { @@ -1655,11 +1850,6 @@ <1 RK_PB2 2 &pcfg_pull_up_8ma>; }; - emmc_pwren: emmc-pwren { - rockchip,pins = - <1 RK_PB0 2 &pcfg_pull_none>; - }; - emmc_rstnout: emmc-rstnout { rockchip,pins = <1 RK_PB3 2 &pcfg_pull_none>; diff --git a/arch/arm64/boot/dts/rockchip/rk3308-evb.dts b/arch/arm64/boot/dts/rockchip/rk3308-evb.dts new file mode 100644 index 000000000000..9b4f855ea5d4 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3308-evb.dts @@ -0,0 +1,230 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd + * + */ + +/dts-v1/; +#include <dt-bindings/input/input.h> +#include "rk3308.dtsi" + +/ { + model = "Rockchip RK3308 EVB"; + compatible = "rockchip,rk3308-evb", "rockchip,rk3308"; + + chosen { + stdout-path = "serial4:1500000n8"; + }; + + adc-keys0 { + compatible = "adc-keys"; + io-channels = <&saradc 0>; + io-channel-names = "buttons"; + poll-interval = <100>; + keyup-threshold-microvolt = <1800000>; + + func-key { + linux,code = <KEY_FN>; + label = "function"; + press-threshold-microvolt = <18000>; + }; + }; + + adc-keys1 { + compatible = "adc-keys"; + io-channels = <&saradc 1>; + io-channel-names = "buttons"; + poll-interval = <100>; + keyup-threshold-microvolt = <1800000>; + + esc-key { + linux,code = <KEY_MICMUTE>; + label = "micmute"; + press-threshold-microvolt = <1130000>; + }; + + home-key { + linux,code = <KEY_MODE>; + label = "mode"; + press-threshold-microvolt = <901000>; + }; + + menu-key { + linux,code = <KEY_PLAY>; + label = "play"; + press-threshold-microvolt = <624000>; + }; + + vol-down-key { + linux,code = <KEY_VOLUMEDOWN>; + label = "volume down"; + press-threshold-microvolt = <300000>; + }; + + vol-up-key { + linux,code = <KEY_VOLUMEUP>; + label = "volume up"; + press-threshold-microvolt = <18000>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + autorepeat; + + pinctrl-names = "default"; + pinctrl-0 = <&pwr_key>; + + power { + gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + label = "GPIO Key Power"; + debounce-interval = <100>; + wakeup-source; + }; + }; + + vcc12v_dcin: vcc12v-dcin { + compatible = "regulator-fixed"; + regulator-name = "vcc12v_dcin"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-always-on; + regulator-boot-on; + }; + + vcc5v0_sys: vcc5v0-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc12v_dcin>; + }; + + vccio_sdio: vcc_1v8: vcc-1v8 { + compatible = "regulator-fixed"; + regulator-name = "vcc_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc_io>; + }; + + vcc_ddr: vcc-ddr { + compatible = "regulator-fixed"; + regulator-name = "vcc_ddr"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc5v0_sys>; + }; + + vcc_io: vcc-io { + compatible = "regulator-fixed"; + regulator-name = "vcc_io"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc5v0_sys>; + }; + + vccio_flash: vccio-flash { + compatible = "regulator-fixed"; + regulator-name = "vccio_flash"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc_io>; + }; + + vcc5v0_host: vcc5v0-host { + compatible = "regulator-fixed"; + gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&usb_drv>; + regulator-name = "vbus_host"; + vin-supply = <&vcc5v0_sys>; + }; + + vdd_core: vdd-core { + compatible = "pwm-regulator"; + pwms = <&pwm0 0 5000 1>; + regulator-name = "vdd_core"; + regulator-min-microvolt = <827000>; + regulator-max-microvolt = <1340000>; + regulator-always-on; + regulator-boot-on; + regulator-settling-time-up-us = <250>; + pwm-supply = <&vcc5v0_sys>; + }; + + vdd_log: vdd-log { + compatible = "regulator-fixed"; + regulator-name = "vdd_log"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc5v0_sys>; + }; + + vdd_1v0: vdd-1v0 { + compatible = "regulator-fixed"; + regulator-name = "vdd_1v0"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc5v0_sys>; + }; +}; + +&cpu0 { + cpu-supply = <&vdd_core>; +}; + +&saradc { + status = "okay"; + vref-supply = <&vcc_1v8>; +}; + +&pinctrl { + pinctrl-names = "default"; + pinctrl-0 = <&rtc_32k>; + + buttons { + pwr_key: pwr-key { + rockchip,pins = <0 RK_PA6 0 &pcfg_pull_up>; + }; + }; + + usb { + usb_drv: usb-drv { + rockchip,pins = <0 RK_PC5 0 &pcfg_pull_none>; + }; + }; + + sdio-pwrseq { + wifi_enable_h: wifi-enable-h { + rockchip,pins = <0 RK_PA2 0 &pcfg_pull_none>; + }; + }; +}; + +&pwm0 { + status = "okay"; + pinctrl-0 = <&pwm0_pin_pull_down>; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&uart4_xfer>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3308-roc-cc.dts b/arch/arm64/boot/dts/rockchip/rk3308-roc-cc.dts new file mode 100644 index 000000000000..aa256350b18f --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3308-roc-cc.dts @@ -0,0 +1,188 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd + */ + +/dts-v1/; +#include "rk3308.dtsi" + +/ { + model = "Firefly ROC-RK3308-CC board"; + compatible = "firefly,roc-rk3308-cc", "rockchip,rk3308"; + chosen { + stdout-path = "serial2:1500000n8"; + }; + + ir_rx { + compatible = "gpio-ir-receiver"; + gpios = <&gpio0 RK_PC0 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&ir_recv_pin>; + }; + + ir_tx { + compatible = "pwm-ir-tx"; + pwms = <&pwm5 0 25000 0>; + }; + + leds { + compatible = "gpio-leds"; + + power { + label = "firefly:red:power"; + linux,default-trigger = "ir-power-click"; + default-state = "on"; + gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; + }; + + user { + label = "firefly:blue:user"; + linux,default-trigger = "ir-user-click"; + default-state = "off"; + gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_HIGH>; + }; + }; + + typec_vcc5v: typec-vcc5v { + compatible = "regulator-fixed"; + regulator-name = "typec_vcc5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + vcc5v0_sys: vcc5v0-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&typec_vcc5v>; + }; + + vcc_io: vcc-io { + compatible = "regulator-fixed"; + regulator-name = "vcc_io"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc5v0_sys>; + }; + + vcc_sdmmc: vcc-sdmmc { + compatible = "regulator-gpio"; + regulator-name = "vcc_sdmmc"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_HIGH>; + states = <1800000 0x0 + 3300000 0x1>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc_sd: vcc-sd { + compatible = "regulator-fixed"; + gpio = <&gpio4 RK_PD6 GPIO_ACTIVE_LOW>; + regulator-name = "vcc_sd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + vim-supply = <&vcc_io>; + }; + + vdd_core: vdd-core { + compatible = "pwm-regulator"; + pwms = <&pwm0 0 5000 1>; + regulator-name = "vdd_core"; + regulator-min-microvolt = <827000>; + regulator-max-microvolt = <1340000>; + regulator-init-microvolt = <1015000>; + regulator-settling-time-up-us = <250>; + regulator-always-on; + regulator-boot-on; + pwm-supply = <&vcc5v0_sys>; + }; + + vdd_log: vdd-log { + compatible = "regulator-fixed"; + regulator-name = "vdd_log"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc5v0_sys>; + }; +}; + +&cpu0 { + cpu-supply = <&vdd_core>; +}; + +&emmc { + bus-width = <8>; + cap-mmc-highspeed; + disable-wp; + mmc-hs200-1_8v; + non-removable; + status = "okay"; +}; + +&i2c1 { + clock-frequency = <400000>; + status = "okay"; + + rtc: rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + #clock-cells = <0>; + }; +}; + +&pwm5 { + status = "okay"; + pinctrl-names = "active"; + pinctrl-0 = <&pwm5_pin_pull_down>; +}; + +&pinctrl { + pinctrl-names = "default"; + pinctrl-0 = <&rtc_32k>; + + ir-receiver { + ir_recv_pin: ir-recv-pin { + rockchip,pins = <0 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + buttons { + pwr_key: pwr-key { + rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; +}; + +&pwm0 { + status = "okay"; + pinctrl-0 = <&pwm0_pin_pull_down>; +}; + +&sdmmc { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + card-detect-delay = <300>; + sd-uhs-sdr25; + sd-uhs-sdr50; + sd-uhs-sdr104; + vmmc-supply = <&vcc_sd>; + vqmmc-supply = <&vcc_sdmmc>; + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3308.dtsi b/arch/arm64/boot/dts/rockchip/rk3308.dtsi new file mode 100644 index 000000000000..116f1900effb --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3308.dtsi @@ -0,0 +1,1739 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd + * + */ + +#include <dt-bindings/clock/rk3308-cru.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include <dt-bindings/soc/rockchip,boot-mode.h> +#include <dt-bindings/thermal/thermal.h> + +/ { + compatible = "rockchip,rk3308"; + + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + serial3 = &uart3; + serial4 = &uart4; + spi0 = &spi0; + spi1 = &spi1; + spi2 = &spi2; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a35", "arm,armv8"; + reg = <0x0 0x0>; + enable-method = "psci"; + clocks = <&cru ARMCLK>; + #cooling-cells = <2>; + dynamic-power-coefficient = <90>; + operating-points-v2 = <&cpu0_opp_table>; + cpu-idle-states = <&CPU_SLEEP>; + next-level-cache = <&l2>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a35", "arm,armv8"; + reg = <0x0 0x1>; + enable-method = "psci"; + operating-points-v2 = <&cpu0_opp_table>; + cpu-idle-states = <&CPU_SLEEP>; + next-level-cache = <&l2>; + }; + + cpu2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a35", "arm,armv8"; + reg = <0x0 0x2>; + enable-method = "psci"; + operating-points-v2 = <&cpu0_opp_table>; + cpu-idle-states = <&CPU_SLEEP>; + next-level-cache = <&l2>; + }; + + cpu3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a35", "arm,armv8"; + reg = <0x0 0x3>; + enable-method = "psci"; + operating-points-v2 = <&cpu0_opp_table>; + cpu-idle-states = <&CPU_SLEEP>; + next-level-cache = <&l2>; + }; + + idle-states { + entry-method = "psci"; + + CPU_SLEEP: cpu-sleep { + compatible = "arm,idle-state"; + local-timer-stop; + arm,psci-suspend-param = <0x0010000>; + entry-latency-us = <120>; + exit-latency-us = <250>; + min-residency-us = <900>; + }; + }; + + l2: l2-cache { + compatible = "cache"; + }; + }; + + cpu0_opp_table: cpu0-opp-table { + compatible = "operating-points-v2"; + opp-shared; + + opp-408000000 { + opp-hz = /bits/ 64 <408000000>; + opp-microvolt = <950000 950000 1340000>; + clock-latency-ns = <40000>; + opp-suspend; + }; + opp-600000000 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <950000 950000 1340000>; + clock-latency-ns = <40000>; + }; + opp-816000000 { + opp-hz = /bits/ 64 <816000000>; + opp-microvolt = <1025000 1025000 1340000>; + clock-latency-ns = <40000>; + }; + opp-1008000000 { + opp-hz = /bits/ 64 <1008000000>; + opp-microvolt = <1125000 1125000 1340000>; + clock-latency-ns = <40000>; + }; + }; + + arm-pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; + }; + + mac_clkin: external-mac-clock { + compatible = "fixed-clock"; + clock-frequency = <50000000>; + clock-output-names = "mac_clkin"; + #clock-cells = <0>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + }; + + xin24m: xin24m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + clock-output-names = "xin24m"; + }; + + grf: grf@ff000000 { + compatible = "rockchip,rk3308-grf", "syscon", "simple-mfd"; + reg = <0x0 0xff000000 0x0 0x10000>; + + reboot-mode { + compatible = "syscon-reboot-mode"; + offset = <0x500>; + mode-bootloader = <BOOT_BL_DOWNLOAD>; + mode-loader = <BOOT_BL_DOWNLOAD>; + mode-normal = <BOOT_NORMAL>; + mode-recovery = <BOOT_RECOVERY>; + mode-fastboot = <BOOT_FASTBOOT>; + }; + }; + + detect_grf: syscon@ff00b000 { + compatible = "rockchip,rk3308-detect-grf", "syscon", "simple-mfd"; + reg = <0x0 0xff00b000 0x0 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + }; + + core_grf: syscon@ff00c000 { + compatible = "rockchip,rk3308-core-grf", "syscon", "simple-mfd"; + reg = <0x0 0xff00c000 0x0 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + }; + + i2c0: i2c@ff040000 { + compatible = "rockchip,rk3308-i2c", "rockchip,rk3399-i2c"; + reg = <0x0 0xff040000 0x0 0x1000>; + clocks = <&cru SCLK_I2C0>, <&cru PCLK_I2C0>; + clock-names = "i2c", "pclk"; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_xfer>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c1: i2c@ff050000 { + compatible = "rockchip,rk3308-i2c", "rockchip,rk3399-i2c"; + reg = <0x0 0xff050000 0x0 0x1000>; + clocks = <&cru SCLK_I2C1>, <&cru PCLK_I2C1>; + clock-names = "i2c", "pclk"; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_xfer>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@ff060000 { + compatible = "rockchip,rk3308-i2c", "rockchip,rk3399-i2c"; + reg = <0x0 0xff060000 0x0 0x1000>; + clocks = <&cru SCLK_I2C2>, <&cru PCLK_I2C2>; + clock-names = "i2c", "pclk"; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_xfer>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c3: i2c@ff070000 { + compatible = "rockchip,rk3308-i2c", "rockchip,rk3399-i2c"; + reg = <0x0 0xff070000 0x0 0x1000>; + clocks = <&cru SCLK_I2C3>, <&cru PCLK_I2C3>; + clock-names = "i2c", "pclk"; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c3m0_xfer>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + wdt: watchdog@ff080000 { + compatible = "snps,dw-wdt"; + reg = <0x0 0xff080000 0x0 0x100>; + clocks = <&cru PCLK_WDT>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + uart0: serial@ff0a0000 { + compatible = "rockchip,rk3308-uart", "snps,dw-apb-uart"; + reg = <0x0 0xff0a0000 0x0 0x100>; + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>; + clock-names = "baudclk", "apb_pclk"; + reg-shift = <2>; + reg-io-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>; + status = "disabled"; + }; + + uart1: serial@ff0b0000 { + compatible = "rockchip,rk3308-uart", "snps,dw-apb-uart"; + reg = <0x0 0xff0b0000 0x0 0x100>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>; + clock-names = "baudclk", "apb_pclk"; + reg-shift = <2>; + reg-io-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&uart1_xfer &uart1_cts &uart1_rts>; + status = "disabled"; + }; + + uart2: serial@ff0c0000 { + compatible = "rockchip,rk3308-uart", "snps,dw-apb-uart"; + reg = <0x0 0xff0c0000 0x0 0x100>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>; + clock-names = "baudclk", "apb_pclk"; + reg-shift = <2>; + reg-io-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&uart2m0_xfer>; + status = "disabled"; + }; + + uart3: serial@ff0d0000 { + compatible = "rockchip,rk3308-uart", "snps,dw-apb-uart"; + reg = <0x0 0xff0d0000 0x0 0x100>; + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>; + clock-names = "baudclk", "apb_pclk"; + reg-shift = <2>; + reg-io-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&uart3_xfer>; + status = "disabled"; + }; + + uart4: serial@ff0e0000 { + compatible = "rockchip,rk3308-uart", "snps,dw-apb-uart"; + reg = <0x0 0xff0e0000 0x0 0x100>; + interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_UART4>, <&cru PCLK_UART4>; + clock-names = "baudclk", "apb_pclk"; + reg-shift = <2>; + reg-io-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&uart4_xfer &uart4_cts &uart4_rts>; + status = "disabled"; + }; + + spi0: spi@ff120000 { + compatible = "rockchip,rk3308-spi", "rockchip,rk3066-spi"; + reg = <0x0 0xff120000 0x0 0x1000>; + interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>; + clock-names = "spiclk", "apb_pclk"; + dmas = <&dmac0 0>, <&dmac0 1>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&spi0_clk &spi0_csn0 &spi0_miso &spi0_mosi>; + status = "disabled"; + }; + + spi1: spi@ff130000 { + compatible = "rockchip,rk3308-spi", "rockchip,rk3066-spi"; + reg = <0x0 0xff130000 0x0 0x1000>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&cru SCLK_SPI1>, <&cru PCLK_SPI1>; + clock-names = "spiclk", "apb_pclk"; + dmas = <&dmac0 2>, <&dmac0 3>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&spi1_clk &spi1_csn0 &spi1_miso &spi1_mosi>; + status = "disabled"; + }; + + spi2: spi@ff140000 { + compatible = "rockchip,rk3308-spi", "rockchip,rk3066-spi"; + reg = <0x0 0xff140000 0x0 0x1000>; + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&cru SCLK_SPI2>, <&cru PCLK_SPI2>; + clock-names = "spiclk", "apb_pclk"; + dmas = <&dmac1 16>, <&dmac1 17>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&spi2_clk &spi2_csn0 &spi2_miso &spi2_mosi>; + status = "disabled"; + }; + + pwm8: pwm@ff160000 { + compatible = "rockchip,rk3308-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xff160000 0x0 0x10>; + clocks = <&cru SCLK_PWM2>, <&cru PCLK_PWM2>; + clock-names = "pwm", "pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&pwm8_pin>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm9: pwm@ff160010 { + compatible = "rockchip,rk3308-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xff160010 0x0 0x10>; + clocks = <&cru SCLK_PWM2>, <&cru PCLK_PWM2>; + clock-names = "pwm", "pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&pwm9_pin>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm10: pwm@ff160020 { + compatible = "rockchip,rk3308-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xff160020 0x0 0x10>; + clocks = <&cru SCLK_PWM2>, <&cru PCLK_PWM2>; + clock-names = "pwm", "pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&pwm10_pin>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm11: pwm@ff160030 { + compatible = "rockchip,rk3308-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xff160030 0x0 0x10>; + clocks = <&cru SCLK_PWM2>, <&cru PCLK_PWM2>; + clock-names = "pwm", "pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&pwm11_pin>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm4: pwm@ff170000 { + compatible = "rockchip,rk3308-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xff170000 0x0 0x10>; + clocks = <&cru SCLK_PWM1>, <&cru PCLK_PWM1>; + clock-names = "pwm", "pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&pwm4_pin>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm5: pwm@ff170010 { + compatible = "rockchip,rk3308-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xff170010 0x0 0x10>; + clocks = <&cru SCLK_PWM1>, <&cru PCLK_PWM1>; + clock-names = "pwm", "pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&pwm5_pin>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm6: pwm@ff170020 { + compatible = "rockchip,rk3308-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xff170020 0x0 0x10>; + clocks = <&cru SCLK_PWM1>, <&cru PCLK_PWM1>; + clock-names = "pwm", "pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&pwm6_pin>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm7: pwm@ff170030 { + compatible = "rockchip,rk3308-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xff170030 0x0 0x10>; + clocks = <&cru SCLK_PWM1>, <&cru PCLK_PWM1>; + clock-names = "pwm", "pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&pwm7_pin>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm0: pwm@ff180000 { + compatible = "rockchip,rk3308-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xff180000 0x0 0x10>; + clocks = <&cru SCLK_PWM0>, <&cru PCLK_PWM0>; + clock-names = "pwm", "pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&pwm0_pin>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm1: pwm@ff180010 { + compatible = "rockchip,rk3308-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xff180010 0x0 0x10>; + clocks = <&cru SCLK_PWM0>, <&cru PCLK_PWM0>; + clock-names = "pwm", "pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&pwm1_pin>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm2: pwm@ff180020 { + compatible = "rockchip,rk3308-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xff180020 0x0 0x10>; + clocks = <&cru SCLK_PWM0>, <&cru PCLK_PWM0>; + clock-names = "pwm", "pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&pwm2_pin>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm3: pwm@ff180030 { + compatible = "rockchip,rk3308-pwm", "rockchip,rk3328-pwm"; + reg = <0x0 0xff180030 0x0 0x10>; + clocks = <&cru SCLK_PWM0>, <&cru PCLK_PWM0>; + clock-names = "pwm", "pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&pwm3_pin>; + #pwm-cells = <3>; + status = "disabled"; + }; + + rktimer: rktimer@ff1a0000 { + compatible = "rockchip,rk3288-timer"; + reg = <0x0 0xff1a0000 0x0 0x20>; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_TIMER>, <&cru SCLK_TIMER0>; + clock-names = "pclk", "timer"; + }; + + saradc: saradc@ff1e0000 { + compatible = "rockchip,rk3308-saradc", "rockchip,rk3399-saradc"; + reg = <0x0 0xff1e0000 0x0 0x100>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>; + clock-names = "saradc", "apb_pclk"; + #io-channel-cells = <1>; + resets = <&cru SRST_SARADC_P>; + reset-names = "saradc-apb"; + status = "disabled"; + }; + + amba { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + dmac0: dma-controller@ff2c0000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x0 0xff2c0000 0x0 0x4000>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru ACLK_DMAC0>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + }; + + dmac1: dma-controller@ff2d0000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x0 0xff2d0000 0x0 0x4000>; + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru ACLK_DMAC1>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + }; + }; + + i2s_2ch_0: i2s@ff350000 { + compatible = "rockchip,rk3308-i2s", "rockchip,rk3066-i2s"; + reg = <0x0 0xff350000 0x0 0x1000>; + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_I2S0_2CH>, <&cru HCLK_I2S0_2CH>; + clock-names = "i2s_clk", "i2s_hclk"; + dmas = <&dmac1 8>, <&dmac1 9>; + dma-names = "tx", "rx"; + resets = <&cru SRST_I2S0_2CH_M>, <&cru SRST_I2S0_2CH_H>; + reset-names = "reset-m", "reset-h"; + pinctrl-names = "default"; + pinctrl-0 = <&i2s_2ch_0_sclk + &i2s_2ch_0_lrck + &i2s_2ch_0_sdi + &i2s_2ch_0_sdo>; + status = "disabled"; + }; + + i2s_2ch_1: i2s@ff360000 { + compatible = "rockchip,rk3308-i2s", "rockchip,rk3066-i2s"; + reg = <0x0 0xff360000 0x0 0x1000>; + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_I2S1_2CH>, <&cru HCLK_I2S1_2CH>; + clock-names = "i2s_clk", "i2s_hclk"; + dmas = <&dmac1 11>; + dma-names = "rx"; + resets = <&cru SRST_I2S1_2CH_M>, <&cru SRST_I2S1_2CH_H>; + reset-names = "reset-m", "reset-h"; + status = "disabled"; + }; + + spdif_tx: spdif-tx@ff3a0000 { + compatible = "rockchip,rk3308-spdif", "rockchip,rk3328-spdif"; + reg = <0x0 0xff3a0000 0x0 0x1000>; + interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_SPDIF_TX>, <&cru HCLK_SPDIFTX>; + clock-names = "mclk", "hclk"; + dmas = <&dmac1 13>; + dma-names = "tx"; + pinctrl-names = "default"; + pinctrl-0 = <&spdif_out>; + status = "disabled"; + }; + + sdmmc: mmc@ff480000 { + compatible = "rockchip,rk3308-dw-mshc", "rockchip,rk3288-dw-mshc"; + reg = <0x0 0xff480000 0x0 0x4000>; + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; + bus-width = <4>; + clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>, + <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>; + clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; + fifo-depth = <0x100>; + max-frequency = <150000000>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_det &sdmmc_bus4>; + status = "disabled"; + }; + + emmc: mmc@ff490000 { + compatible = "rockchip,rk3308-dw-mshc", "rockchip,rk3288-dw-mshc"; + reg = <0x0 0xff490000 0x0 0x4000>; + interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; + bus-width = <8>; + clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>, + <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>; + clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; + fifo-depth = <0x100>; + max-frequency = <150000000>; + status = "disabled"; + }; + + sdio: mmc@ff4a0000 { + compatible = "rockchip,rk3308-dw-mshc", "rockchip,rk3288-dw-mshc"; + reg = <0x0 0xff4a0000 0x0 0x4000>; + interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; + bus-width = <4>; + clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>, + <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>; + clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; + fifo-depth = <0x100>; + max-frequency = <150000000>; + pinctrl-names = "default"; + pinctrl-0 = <&sdio_bus4 &sdio_cmd &sdio_clk>; + status = "disabled"; + }; + + cru: clock-controller@ff500000 { + compatible = "rockchip,rk3308-cru"; + reg = <0x0 0xff500000 0x0 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + rockchip,grf = <&grf>; + + assigned-clocks = <&cru SCLK_RTC32K>; + assigned-clock-rates = <32768>; + }; + + gic: interrupt-controller@ff580000 { + compatible = "arm,gic-400"; + reg = <0x0 0xff581000 0x0 0x1000>, + <0x0 0xff582000 0x0 0x2000>, + <0x0 0xff584000 0x0 0x2000>, + <0x0 0xff586000 0x0 0x2000>; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <3>; + interrupt-controller; + #address-cells = <0>; + }; + + sram: sram@fff80000 { + compatible = "mmio-sram"; + reg = <0x0 0xfff80000 0x0 0x40000>; + ranges = <0 0x0 0xfff80000 0x40000>; + #address-cells = <1>; + #size-cells = <1>; + + /* reserved for ddr dvfs and system suspend/resume */ + ddr-sram@0 { + reg = <0x0 0x8000>; + }; + + /* reserved for vad audio buffer */ + vad_sram: vad-sram@8000 { + reg = <0x8000 0x38000>; + }; + }; + + pinctrl: pinctrl { + compatible = "rockchip,rk3308-pinctrl"; + rockchip,grf = <&grf>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + gpio0: gpio0@ff220000 { + compatible = "rockchip,gpio-bank"; + reg = <0x0 0xff220000 0x0 0x100>; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_GPIO0>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio1: gpio1@ff230000 { + compatible = "rockchip,gpio-bank"; + reg = <0x0 0xff230000 0x0 0x100>; + interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_GPIO1>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio2: gpio2@ff240000 { + compatible = "rockchip,gpio-bank"; + reg = <0x0 0xff240000 0x0 0x100>; + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_GPIO2>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio3: gpio3@ff250000 { + compatible = "rockchip,gpio-bank"; + reg = <0x0 0xff250000 0x0 0x100>; + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_GPIO3>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio4: gpio4@ff260000 { + compatible = "rockchip,gpio-bank"; + reg = <0x0 0xff260000 0x0 0x100>; + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_GPIO4>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pcfg_pull_up: pcfg-pull-up { + bias-pull-up; + }; + + pcfg_pull_down: pcfg-pull-down { + bias-pull-down; + }; + + pcfg_pull_none: pcfg-pull-none { + bias-disable; + }; + + pcfg_pull_none_2ma: pcfg-pull-none-2ma { + bias-disable; + drive-strength = <2>; + }; + + pcfg_pull_up_2ma: pcfg-pull-up-2ma { + bias-pull-up; + drive-strength = <2>; + }; + + pcfg_pull_up_4ma: pcfg-pull-up-4ma { + bias-pull-up; + drive-strength = <4>; + }; + + pcfg_pull_none_4ma: pcfg-pull-none-4ma { + bias-disable; + drive-strength = <4>; + }; + + pcfg_pull_down_4ma: pcfg-pull-down-4ma { + bias-pull-down; + drive-strength = <4>; + }; + + pcfg_pull_none_8ma: pcfg-pull-none-8ma { + bias-disable; + drive-strength = <8>; + }; + + pcfg_pull_up_8ma: pcfg-pull-up-8ma { + bias-pull-up; + drive-strength = <8>; + }; + + pcfg_pull_none_12ma: pcfg-pull-none-12ma { + bias-disable; + drive-strength = <12>; + }; + + pcfg_pull_up_12ma: pcfg-pull-up-12ma { + bias-pull-up; + drive-strength = <12>; + }; + + pcfg_pull_none_smt: pcfg-pull-none-smt { + bias-disable; + input-schmitt-enable; + }; + + pcfg_output_high: pcfg-output-high { + output-high; + }; + + pcfg_output_low: pcfg-output-low { + output-low; + }; + + pcfg_input_high: pcfg-input-high { + bias-pull-up; + input-enable; + }; + + pcfg_input: pcfg-input { + input-enable; + }; + + emmc { + emmc_clk: emmc-clk { + rockchip,pins = + <3 RK_PB1 2 &pcfg_pull_none_8ma>; + }; + + emmc_cmd: emmc-cmd { + rockchip,pins = + <3 RK_PB0 2 &pcfg_pull_up_8ma>; + }; + + emmc_pwren: emmc-pwren { + rockchip,pins = + <3 RK_PB3 2 &pcfg_pull_none>; + }; + + emmc_rstn: emmc-rstn { + rockchip,pins = + <3 RK_PB2 2 &pcfg_pull_none>; + }; + + emmc_bus1: emmc-bus1 { + rockchip,pins = + <3 RK_PA0 2 &pcfg_pull_up_8ma>; + }; + + emmc_bus4: emmc-bus4 { + rockchip,pins = + <3 RK_PA0 2 &pcfg_pull_up_8ma>, + <3 RK_PA1 2 &pcfg_pull_up_8ma>, + <3 RK_PA2 2 &pcfg_pull_up_8ma>, + <3 RK_PA3 2 &pcfg_pull_up_8ma>; + }; + + emmc_bus8: emmc-bus8 { + rockchip,pins = + <3 RK_PA0 2 &pcfg_pull_up_8ma>, + <3 RK_PA1 2 &pcfg_pull_up_8ma>, + <3 RK_PA2 2 &pcfg_pull_up_8ma>, + <3 RK_PA3 2 &pcfg_pull_up_8ma>, + <3 RK_PA4 2 &pcfg_pull_up_8ma>, + <3 RK_PA5 2 &pcfg_pull_up_8ma>, + <3 RK_PA6 2 &pcfg_pull_up_8ma>, + <3 RK_PA7 2 &pcfg_pull_up_8ma>; + }; + }; + + flash { + flash_csn0: flash-csn0 { + rockchip,pins = + <3 RK_PB5 1 &pcfg_pull_none>; + }; + + flash_rdy: flash-rdy { + rockchip,pins = + <3 RK_PB4 1 &pcfg_pull_none>; + }; + + flash_ale: flash-ale { + rockchip,pins = + <3 RK_PB3 1 &pcfg_pull_none>; + }; + + flash_cle: flash-cle { + rockchip,pins = + <3 RK_PB1 1 &pcfg_pull_none>; + }; + + flash_wrn: flash-wrn { + rockchip,pins = + <3 RK_PB0 1 &pcfg_pull_none>; + }; + + flash_rdn: flash-rdn { + rockchip,pins = + <3 RK_PB2 1 &pcfg_pull_none>; + }; + + flash_bus8: flash-bus8 { + rockchip,pins = + <3 RK_PA0 1 &pcfg_pull_up_12ma>, + <3 RK_PA1 1 &pcfg_pull_up_12ma>, + <3 RK_PA2 1 &pcfg_pull_up_12ma>, + <3 RK_PA3 1 &pcfg_pull_up_12ma>, + <3 RK_PA4 1 &pcfg_pull_up_12ma>, + <3 RK_PA5 1 &pcfg_pull_up_12ma>, + <3 RK_PA6 1 &pcfg_pull_up_12ma>, + <3 RK_PA7 1 &pcfg_pull_up_12ma>; + }; + }; + + gmac { + rmii_pins: rmii-pins { + rockchip,pins = + /* mac_txen */ + <1 RK_PC1 3 &pcfg_pull_none_12ma>, + /* mac_txd1 */ + <1 RK_PC3 3 &pcfg_pull_none_12ma>, + /* mac_txd0 */ + <1 RK_PC2 3 &pcfg_pull_none_12ma>, + /* mac_rxd0 */ + <1 RK_PC4 3 &pcfg_pull_none>, + /* mac_rxd1 */ + <1 RK_PC5 3 &pcfg_pull_none>, + /* mac_rxer */ + <1 RK_PB7 3 &pcfg_pull_none>, + /* mac_rxdv */ + <1 RK_PC0 3 &pcfg_pull_none>, + /* mac_mdio */ + <1 RK_PB6 3 &pcfg_pull_none>, + /* mac_mdc */ + <1 RK_PB5 3 &pcfg_pull_none>; + }; + + mac_refclk_12ma: mac-refclk-12ma { + rockchip,pins = + <1 RK_PB4 3 &pcfg_pull_none_12ma>; + }; + + mac_refclk: mac-refclk { + rockchip,pins = + <1 RK_PB4 3 &pcfg_pull_none>; + }; + }; + + gmac-m1 { + rmiim1_pins: rmiim1-pins { + rockchip,pins = + /* mac_txen */ + <4 RK_PB7 2 &pcfg_pull_none_12ma>, + /* mac_txd1 */ + <4 RK_PA5 2 &pcfg_pull_none_12ma>, + /* mac_txd0 */ + <4 RK_PA4 2 &pcfg_pull_none_12ma>, + /* mac_rxd0 */ + <4 RK_PA2 2 &pcfg_pull_none>, + /* mac_rxd1 */ + <4 RK_PA3 2 &pcfg_pull_none>, + /* mac_rxer */ + <4 RK_PA0 2 &pcfg_pull_none>, + /* mac_rxdv */ + <4 RK_PA1 2 &pcfg_pull_none>, + /* mac_mdio */ + <4 RK_PB6 2 &pcfg_pull_none>, + /* mac_mdc */ + <4 RK_PB5 2 &pcfg_pull_none>; + }; + + macm1_refclk_12ma: macm1-refclk-12ma { + rockchip,pins = + <4 RK_PB4 2 &pcfg_pull_none_12ma>; + }; + + macm1_refclk: macm1-refclk { + rockchip,pins = + <4 RK_PB4 2 &pcfg_pull_none>; + }; + }; + + i2c0 { + i2c0_xfer: i2c0-xfer { + rockchip,pins = + <1 RK_PD0 2 &pcfg_pull_none_smt>, + <1 RK_PD1 2 &pcfg_pull_none_smt>; + }; + }; + + i2c1 { + i2c1_xfer: i2c1-xfer { + rockchip,pins = + <0 RK_PB3 1 &pcfg_pull_none_smt>, + <0 RK_PB4 1 &pcfg_pull_none_smt>; + }; + }; + + i2c2 { + i2c2_xfer: i2c2-xfer { + rockchip,pins = + <2 RK_PA2 3 &pcfg_pull_none_smt>, + <2 RK_PA3 3 &pcfg_pull_none_smt>; + }; + }; + + i2c3-m0 { + i2c3m0_xfer: i2c3m0-xfer { + rockchip,pins = + <0 RK_PB7 2 &pcfg_pull_none_smt>, + <0 RK_PC0 2 &pcfg_pull_none_smt>; + }; + }; + + i2c3-m1 { + i2c3m1_xfer: i2c3m1-xfer { + rockchip,pins = + <3 RK_PB4 2 &pcfg_pull_none_smt>, + <3 RK_PB5 2 &pcfg_pull_none_smt>; + }; + }; + + i2c3-m2 { + i2c3m2_xfer: i2c3m2-xfer { + rockchip,pins = + <2 RK_PA1 3 &pcfg_pull_none_smt>, + <2 RK_PA0 3 &pcfg_pull_none_smt>; + }; + }; + + i2s_2ch_0 { + i2s_2ch_0_mclk: i2s-2ch-0-mclk { + rockchip,pins = + <4 RK_PB4 1 &pcfg_pull_none>; + }; + + i2s_2ch_0_sclk: i2s-2ch-0-sclk { + rockchip,pins = + <4 RK_PB5 1 &pcfg_pull_none>; + }; + + i2s_2ch_0_lrck: i2s-2ch-0-lrck { + rockchip,pins = + <4 RK_PB6 1 &pcfg_pull_none>; + }; + + i2s_2ch_0_sdo: i2s-2ch-0-sdo { + rockchip,pins = + <4 RK_PB7 1 &pcfg_pull_none>; + }; + + i2s_2ch_0_sdi: i2s-2ch-0-sdi { + rockchip,pins = + <4 RK_PC0 1 &pcfg_pull_none>; + }; + }; + + i2s_8ch_0 { + i2s_8ch_0_mclk: i2s-8ch-0-mclk { + rockchip,pins = + <2 RK_PA4 1 &pcfg_pull_none>; + }; + + i2s_8ch_0_sclktx: i2s-8ch-0-sclktx { + rockchip,pins = + <2 RK_PA5 1 &pcfg_pull_none>; + }; + + i2s_8ch_0_sclkrx: i2s-8ch-0-sclkrx { + rockchip,pins = + <2 RK_PA6 1 &pcfg_pull_none>; + }; + + i2s_8ch_0_lrcktx: i2s-8ch-0-lrcktx { + rockchip,pins = + <2 RK_PA7 1 &pcfg_pull_none>; + }; + + i2s_8ch_0_lrckrx: i2s-8ch-0-lrckrx { + rockchip,pins = + <2 RK_PB0 1 &pcfg_pull_none>; + }; + + i2s_8ch_0_sdo0: i2s-8ch-0-sdo0 { + rockchip,pins = + <2 RK_PB1 1 &pcfg_pull_none>; + }; + + i2s_8ch_0_sdo1: i2s-8ch-0-sdo1 { + rockchip,pins = + <2 RK_PB2 1 &pcfg_pull_none>; + }; + + i2s_8ch_0_sdo2: i2s-8ch-0-sdo2 { + rockchip,pins = + <2 RK_PB3 1 &pcfg_pull_none>; + }; + + i2s_8ch_0_sdo3: i2s-8ch-0-sdo3 { + rockchip,pins = + <2 RK_PB4 1 &pcfg_pull_none>; + }; + + i2s_8ch_0_sdi0: i2s-8ch-0-sdi0 { + rockchip,pins = + <2 RK_PB5 1 &pcfg_pull_none>; + }; + + i2s_8ch_0_sdi1: i2s-8ch-0-sdi1 { + rockchip,pins = + <2 RK_PB6 1 &pcfg_pull_none>; + }; + + i2s_8ch_0_sdi2: i2s-8ch-0-sdi2 { + rockchip,pins = + <2 RK_PB7 1 &pcfg_pull_none>; + }; + + i2s_8ch_0_sdi3: i2s-8ch-0-sdi3 { + rockchip,pins = + <2 RK_PC0 1 &pcfg_pull_none>; + }; + }; + + i2s_8ch_1_m0 { + i2s_8ch_1_m0_mclk: i2s-8ch-1-m0-mclk { + rockchip,pins = + <1 RK_PA2 2 &pcfg_pull_none>; + }; + + i2s_8ch_1_m0_sclktx: i2s-8ch-1-m0-sclktx { + rockchip,pins = + <1 RK_PA3 2 &pcfg_pull_none>; + }; + + i2s_8ch_1_m0_sclkrx: i2s-8ch-1-m0-sclkrx { + rockchip,pins = + <1 RK_PA4 2 &pcfg_pull_none>; + }; + + i2s_8ch_1_m0_lrcktx: i2s-8ch-1-m0-lrcktx { + rockchip,pins = + <1 RK_PA5 2 &pcfg_pull_none>; + }; + + i2s_8ch_1_m0_lrckrx: i2s-8ch-1-m0-lrckrx { + rockchip,pins = + <1 RK_PA6 2 &pcfg_pull_none>; + }; + + i2s_8ch_1_m0_sdo0: i2s-8ch-1-m0-sdo0 { + rockchip,pins = + <1 RK_PA7 2 &pcfg_pull_none>; + }; + + i2s_8ch_1_m0_sdo1_sdi3: i2s-8ch-1-m0-sdo1-sdi3 { + rockchip,pins = + <1 RK_PB0 2 &pcfg_pull_none>; + }; + + i2s_8ch_1_m0_sdo2_sdi2: i2s-8ch-1-m0-sdo2-sdi2 { + rockchip,pins = + <1 RK_PB1 2 &pcfg_pull_none>; + }; + + i2s_8ch_1_m0_sdo3_sdi1: i2s-8ch-1-m0-sdo3_sdi1 { + rockchip,pins = + <1 RK_PB2 2 &pcfg_pull_none>; + }; + + i2s_8ch_1_m0_sdi0: i2s-8ch-1-m0-sdi0 { + rockchip,pins = + <1 RK_PB3 2 &pcfg_pull_none>; + }; + }; + + i2s_8ch_1_m1 { + i2s_8ch_1_m1_mclk: i2s-8ch-1-m1-mclk { + rockchip,pins = + <1 RK_PB4 2 &pcfg_pull_none>; + }; + + i2s_8ch_1_m1_sclktx: i2s-8ch-1-m1-sclktx { + rockchip,pins = + <1 RK_PB5 2 &pcfg_pull_none>; + }; + + i2s_8ch_1_m1_sclkrx: i2s-8ch-1-m1-sclkrx { + rockchip,pins = + <1 RK_PB6 2 &pcfg_pull_none>; + }; + + i2s_8ch_1_m1_lrcktx: i2s-8ch-1-m1-lrcktx { + rockchip,pins = + <1 RK_PB7 2 &pcfg_pull_none>; + }; + + i2s_8ch_1_m1_lrckrx: i2s-8ch-1-m1-lrckrx { + rockchip,pins = + <1 RK_PC0 2 &pcfg_pull_none>; + }; + + i2s_8ch_1_m1_sdo0: i2s-8ch-1-m1-sdo0 { + rockchip,pins = + <1 RK_PC1 2 &pcfg_pull_none>; + }; + + i2s_8ch_1_m1_sdo1_sdi3: i2s-8ch-1-m1-sdo1-sdi3 { + rockchip,pins = + <1 RK_PC2 2 &pcfg_pull_none>; + }; + + i2s_8ch_1_m1_sdo2_sdi2: i2s-8ch-1-m1-sdo2-sdi2 { + rockchip,pins = + <1 RK_PC3 2 &pcfg_pull_none>; + }; + + i2s_8ch_1_m1_sdo3_sdi1: i2s-8ch-1-m1-sdo3_sdi1 { + rockchip,pins = + <1 RK_PC4 2 &pcfg_pull_none>; + }; + + i2s_8ch_1_m1_sdi0: i2s-8ch-1-m1-sdi0 { + rockchip,pins = + <1 RK_PC5 2 &pcfg_pull_none>; + }; + }; + + pdm_m0 { + pdm_m0_clk: pdm-m0-clk { + rockchip,pins = + <1 RK_PA4 3 &pcfg_pull_none>; + }; + + pdm_m0_sdi0: pdm-m0-sdi0 { + rockchip,pins = + <1 RK_PB3 3 &pcfg_pull_none>; + }; + + pdm_m0_sdi1: pdm-m0-sdi1 { + rockchip,pins = + <1 RK_PB2 3 &pcfg_pull_none>; + }; + + pdm_m0_sdi2: pdm-m0-sdi2 { + rockchip,pins = + <1 RK_PB1 3 &pcfg_pull_none>; + }; + + pdm_m0_sdi3: pdm-m0-sdi3 { + rockchip,pins = + <1 RK_PB0 3 &pcfg_pull_none>; + }; + }; + + pdm_m1 { + pdm_m1_clk: pdm-m1-clk { + rockchip,pins = + <1 RK_PB6 4 &pcfg_pull_none>; + }; + + pdm_m1_sdi0: pdm-m1-sdi0 { + rockchip,pins = + <1 RK_PC5 4 &pcfg_pull_none>; + }; + + pdm_m1_sdi1: pdm-m1-sdi1 { + rockchip,pins = + <1 RK_PC4 4 &pcfg_pull_none>; + }; + + pdm_m1_sdi2: pdm-m1-sdi2 { + rockchip,pins = + <1 RK_PC3 4 &pcfg_pull_none>; + }; + + pdm_m1_sdi3: pdm-m1-sdi3 { + rockchip,pins = + <1 RK_PC2 4 &pcfg_pull_none>; + }; + }; + + pdm_m2 { + pdm_m2_clkm: pdm-m2-clkm { + rockchip,pins = + <2 RK_PA4 3 &pcfg_pull_none>; + }; + + pdm_m2_clk: pdm-m2-clk { + rockchip,pins = + <2 RK_PA6 2 &pcfg_pull_none>; + }; + + pdm_m2_sdi0: pdm-m2-sdi0 { + rockchip,pins = + <2 RK_PB5 2 &pcfg_pull_none>; + }; + + pdm_m2_sdi1: pdm-m2-sdi1 { + rockchip,pins = + <2 RK_PB6 2 &pcfg_pull_none>; + }; + + pdm_m2_sdi2: pdm-m2-sdi2 { + rockchip,pins = + <2 RK_PB7 2 &pcfg_pull_none>; + }; + + pdm_m2_sdi3: pdm-m2-sdi3 { + rockchip,pins = + <2 RK_PC0 2 &pcfg_pull_none>; + }; + }; + + pwm0 { + pwm0_pin: pwm0-pin { + rockchip,pins = + <0 RK_PB5 1 &pcfg_pull_none>; + }; + + pwm0_pin_pull_down: pwm0-pin-pull-down { + rockchip,pins = + <0 RK_PB5 1 &pcfg_pull_down>; + }; + }; + + pwm1 { + pwm1_pin: pwm1-pin { + rockchip,pins = + <0 RK_PB6 1 &pcfg_pull_none>; + }; + + pwm1_pin_pull_down: pwm1-pin-pull-down { + rockchip,pins = + <0 RK_PB6 1 &pcfg_pull_down>; + }; + }; + + pwm2 { + pwm2_pin: pwm2-pin { + rockchip,pins = + <0 RK_PB7 1 &pcfg_pull_none>; + }; + + pwm2_pin_pull_down: pwm2-pin-pull-down { + rockchip,pins = + <0 RK_PB7 1 &pcfg_pull_down>; + }; + }; + + pwm3 { + pwm3_pin: pwm3-pin { + rockchip,pins = + <0 RK_PC0 1 &pcfg_pull_none>; + }; + + pwm3_pin_pull_down: pwm3-pin-pull-down { + rockchip,pins = + <0 RK_PC0 1 &pcfg_pull_down>; + }; + }; + + pwm4 { + pwm4_pin: pwm4-pin { + rockchip,pins = + <0 RK_PA1 2 &pcfg_pull_none>; + }; + + pwm4_pin_pull_down: pwm4-pin-pull-down { + rockchip,pins = + <0 RK_PA1 2 &pcfg_pull_down>; + }; + }; + + pwm5 { + pwm5_pin: pwm5-pin { + rockchip,pins = + <0 RK_PC1 2 &pcfg_pull_none>; + }; + + pwm5_pin_pull_down: pwm5-pin-pull-down { + rockchip,pins = + <0 RK_PC1 2 &pcfg_pull_down>; + }; + }; + + pwm6 { + pwm6_pin: pwm6-pin { + rockchip,pins = + <0 RK_PC2 2 &pcfg_pull_none>; + }; + + pwm6_pin_pull_down: pwm6-pin-pull-down { + rockchip,pins = + <0 RK_PC2 2 &pcfg_pull_down>; + }; + }; + + pwm7 { + pwm7_pin: pwm7-pin { + rockchip,pins = + <2 RK_PB0 2 &pcfg_pull_none>; + }; + + pwm7_pin_pull_down: pwm7-pin-pull-down { + rockchip,pins = + <2 RK_PB0 2 &pcfg_pull_down>; + }; + }; + + pwm8 { + pwm8_pin: pwm8-pin { + rockchip,pins = + <2 RK_PB2 2 &pcfg_pull_none>; + }; + + pwm8_pin_pull_down: pwm8-pin-pull-down { + rockchip,pins = + <2 RK_PB2 2 &pcfg_pull_down>; + }; + }; + + pwm9 { + pwm9_pin: pwm9-pin { + rockchip,pins = + <2 RK_PB3 2 &pcfg_pull_none>; + }; + + pwm9_pin_pull_down: pwm9-pin-pull-down { + rockchip,pins = + <2 RK_PB3 2 &pcfg_pull_down>; + }; + }; + + pwm10 { + pwm10_pin: pwm10-pin { + rockchip,pins = + <2 RK_PB4 2 &pcfg_pull_none>; + }; + + pwm10_pin_pull_down: pwm10-pin-pull-down { + rockchip,pins = + <2 RK_PB4 2 &pcfg_pull_down>; + }; + }; + + pwm11 { + pwm11_pin: pwm11-pin { + rockchip,pins = + <2 RK_PC0 4 &pcfg_pull_none>; + }; + + pwm11_pin_pull_down: pwm11-pin-pull-down { + rockchip,pins = + <2 RK_PC0 4 &pcfg_pull_down>; + }; + }; + + rtc { + rtc_32k: rtc-32k { + rockchip,pins = + <0 RK_PC3 1 &pcfg_pull_none>; + }; + }; + + sdmmc { + sdmmc_clk: sdmmc-clk { + rockchip,pins = + <4 RK_PD5 1 &pcfg_pull_none_4ma>; + }; + + sdmmc_cmd: sdmmc-cmd { + rockchip,pins = + <4 RK_PD4 1 &pcfg_pull_up_4ma>; + }; + + sdmmc_det: sdmmc-det { + rockchip,pins = + <0 RK_PA3 1 &pcfg_pull_up_4ma>; + }; + + sdmmc_pwren: sdmmc-pwren { + rockchip,pins = + <4 RK_PD6 1 &pcfg_pull_none_4ma>; + }; + + sdmmc_bus1: sdmmc-bus1 { + rockchip,pins = + <4 RK_PD0 1 &pcfg_pull_up_4ma>; + }; + + sdmmc_bus4: sdmmc-bus4 { + rockchip,pins = + <4 RK_PD0 1 &pcfg_pull_up_4ma>, + <4 RK_PD1 1 &pcfg_pull_up_4ma>, + <4 RK_PD2 1 &pcfg_pull_up_4ma>, + <4 RK_PD3 1 &pcfg_pull_up_4ma>; + }; + }; + + sdio { + sdio_clk: sdio-clk { + rockchip,pins = + <4 RK_PA5 1 &pcfg_pull_none_8ma>; + }; + + sdio_cmd: sdio-cmd { + rockchip,pins = + <4 RK_PA4 1 &pcfg_pull_up_8ma>; + }; + + sdio_pwren: sdio-pwren { + rockchip,pins = + <0 RK_PA2 1 &pcfg_pull_none_8ma>; + }; + + sdio_wrpt: sdio-wrpt { + rockchip,pins = + <0 RK_PA1 1 &pcfg_pull_none_8ma>; + }; + + sdio_intn: sdio-intn { + rockchip,pins = + <0 RK_PA0 1 &pcfg_pull_none_8ma>; + }; + + sdio_bus1: sdio-bus1 { + rockchip,pins = + <4 RK_PA0 1 &pcfg_pull_up_8ma>; + }; + + sdio_bus4: sdio-bus4 { + rockchip,pins = + <4 RK_PA0 1 &pcfg_pull_up_8ma>, + <4 RK_PA1 1 &pcfg_pull_up_8ma>, + <4 RK_PA2 1 &pcfg_pull_up_8ma>, + <4 RK_PA3 1 &pcfg_pull_up_8ma>; + }; + }; + + spdif_in { + spdif_in: spdif-in { + rockchip,pins = + <0 RK_PC2 1 &pcfg_pull_none>; + }; + }; + + spdif_out { + spdif_out: spdif-out { + rockchip,pins = + <0 RK_PC1 1 &pcfg_pull_none>; + }; + }; + + spi0 { + spi0_clk: spi0-clk { + rockchip,pins = + <2 RK_PA2 2 &pcfg_pull_up_4ma>; + }; + + spi0_csn0: spi0-csn0 { + rockchip,pins = + <2 RK_PA3 2 &pcfg_pull_up_4ma>; + }; + + spi0_miso: spi0-miso { + rockchip,pins = + <2 RK_PA0 2 &pcfg_pull_up_4ma>; + }; + + spi0_mosi: spi0-mosi { + rockchip,pins = + <2 RK_PA1 2 &pcfg_pull_up_4ma>; + }; + }; + + spi1 { + spi1_clk: spi1-clk { + rockchip,pins = + <3 RK_PB3 3 &pcfg_pull_up_4ma>; + }; + + spi1_csn0: spi1-csn0 { + rockchip,pins = + <3 RK_PB5 3 &pcfg_pull_up_4ma>; + }; + + spi1_miso: spi1-miso { + rockchip,pins = + <3 RK_PB2 3 &pcfg_pull_up_4ma>; + }; + + spi1_mosi: spi1-mosi { + rockchip,pins = + <3 RK_PB4 3 &pcfg_pull_up_4ma>; + }; + }; + + spi1-m1 { + spi1m1_miso: spi1m1-miso { + rockchip,pins = + <2 RK_PA4 2 &pcfg_pull_up_4ma>; + }; + + spi1m1_mosi: spi1m1-mosi { + rockchip,pins = + <2 RK_PA5 2 &pcfg_pull_up_4ma>; + }; + + spi1m1_clk: spi1m1-clk { + rockchip,pins = + <2 RK_PA7 2 &pcfg_pull_up_4ma>; + }; + + spi1m1_csn0: spi1m1-csn0 { + rockchip,pins = + <2 RK_PB1 2 &pcfg_pull_up_4ma>; + }; + }; + + spi2 { + spi2_clk: spi2-clk { + rockchip,pins = + <1 RK_PD0 3 &pcfg_pull_up_4ma>; + }; + + spi2_csn0: spi2-csn0 { + rockchip,pins = + <1 RK_PD1 3 &pcfg_pull_up_4ma>; + }; + + spi2_miso: spi2-miso { + rockchip,pins = + <1 RK_PC6 3 &pcfg_pull_up_4ma>; + }; + + spi2_mosi: spi2-mosi { + rockchip,pins = + <1 RK_PC7 3 &pcfg_pull_up_4ma>; + }; + }; + + tsadc { + tsadc_otp_gpio: tsadc-otp-gpio { + rockchip,pins = + <0 RK_PB2 0 &pcfg_pull_none>; + }; + + tsadc_otp_out: tsadc-otp-out { + rockchip,pins = + <0 RK_PB2 1 &pcfg_pull_none>; + }; + }; + + uart0 { + uart0_xfer: uart0-xfer { + rockchip,pins = + <2 RK_PA1 1 &pcfg_pull_up>, + <2 RK_PA0 1 &pcfg_pull_up>; + }; + + uart0_cts: uart0-cts { + rockchip,pins = + <2 RK_PA2 1 &pcfg_pull_none>; + }; + + uart0_rts: uart0-rts { + rockchip,pins = + <2 RK_PA3 1 &pcfg_pull_none>; + }; + + uart0_rts_gpio: uart0-rts-gpio { + rockchip,pins = + <2 RK_PA3 0 &pcfg_pull_none>; + }; + }; + + uart1 { + uart1_xfer: uart1-xfer { + rockchip,pins = + <1 RK_PD1 1 &pcfg_pull_up>, + <1 RK_PD0 1 &pcfg_pull_up>; + }; + + uart1_cts: uart1-cts { + rockchip,pins = + <1 RK_PC6 1 &pcfg_pull_none>; + }; + + uart1_rts: uart1-rts { + rockchip,pins = + <1 RK_PC7 1 &pcfg_pull_none>; + }; + }; + + uart2-m0 { + uart2m0_xfer: uart2m0-xfer { + rockchip,pins = + <1 RK_PC7 2 &pcfg_pull_up>, + <1 RK_PC6 2 &pcfg_pull_up>; + }; + }; + + uart2-m1 { + uart2m1_xfer: uart2m1-xfer { + rockchip,pins = + <4 RK_PD3 2 &pcfg_pull_up>, + <4 RK_PD2 2 &pcfg_pull_up>; + }; + }; + + uart3 { + uart3_xfer: uart3-xfer { + rockchip,pins = + <3 RK_PB5 4 &pcfg_pull_up>, + <3 RK_PB4 4 &pcfg_pull_up>; + }; + }; + + uart3-m1 { + uart3m1_xfer: uart3m1-xfer { + rockchip,pins = + <0 RK_PC2 3 &pcfg_pull_up>, + <0 RK_PC1 3 &pcfg_pull_up>; + }; + }; + + uart4 { + uart4_xfer: uart4-xfer { + rockchip,pins = + <4 RK_PB1 1 &pcfg_pull_up>, + <4 RK_PB0 1 &pcfg_pull_up>; + }; + + uart4_cts: uart4-cts { + rockchip,pins = + <4 RK_PA6 1 &pcfg_pull_none>; + }; + + uart4_rts: uart4-rts { + rockchip,pins = + <4 RK_PA7 1 &pcfg_pull_none>; + }; + + uart4_rts_gpio: uart4-rts-gpio { + rockchip,pins = + <4 RK_PA7 0 &pcfg_pull_none>; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3328-a1.dts b/arch/arm64/boot/dts/rockchip/rk3328-a1.dts new file mode 100644 index 000000000000..16f1656d5203 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3328-a1.dts @@ -0,0 +1,360 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) +// Copyright (c) 2017-2019 Arm Ltd. + +/dts-v1/; +#include "rk3328.dtsi" + +/ { + model = "Beelink A1"; + compatible = "azw,beelink-a1", "rockchip,rk3328"; + + /* + * UART pins, as viewed with bottom of case removed: + * + * Front + * /------- + * L / o <- Gnd + * e / o <-- Rx + * f / o <--- Tx + * t / o <---- +3.3v + * | + */ + chosen { + stdout-path = "serial2:1500000n8"; + }; + + gmac_clkin: external-gmac-clock { + compatible = "fixed-clock"; + clock-frequency = <125000000>; + clock-output-names = "gmac_clkin"; + #clock-cells = <0>; + }; + + vcc_host_5v: usb3-current-switch { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb30_host_drv>; + regulator-name = "vcc_host_5v"; + vin-supply = <&vcc_sys>; + }; + + vcc_sys: vcc-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc_sys"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + ir-receiver { + compatible = "gpio-ir-receiver"; + gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_LOW>; + linux,rc-map-name = "rc-beelink-gs1"; + }; +}; + +&analog_sound { + simple-audio-card,name = "Analog A/V"; + status = "okay"; +}; + +&codec { + status = "okay"; +}; + +&cpu0 { + cpu-supply = <&vdd_arm>; +}; + +&cpu1 { + cpu-supply = <&vdd_arm>; +}; + +&cpu2 { + cpu-supply = <&vdd_arm>; +}; + +&cpu3 { + cpu-supply = <&vdd_arm>; +}; + +&emmc { + bus-width = <8>; + cap-mmc-highspeed; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + no-sd; + no-sdio; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>; + vmmc-supply = <&vcc_io>; + vqmmc-supply = <&vcc18_emmc>; + status = "okay"; +}; + +&gmac2io { + assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>; + assigned-clock-parents = <&gmac_clkin>, <&gmac_clkin>; + clock_in_out = "input"; + phy-handle = <&rtl8211f>; + phy-mode = "rgmii"; + phy-supply = <&vcc_io>; + pinctrl-names = "default"; + pinctrl-0 = <&rgmiim1_pins>; + snps,aal; + snps,pbl = <0x4>; + tx_delay = <0x26>; + rx_delay = <0x11>; + status = "okay"; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + rtl8211f: phy@0 { + reg = <0>; + reset-assert-us = <10000>; + reset-deassert-us = <30000>; + reset-gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&gpu { + mali-supply = <&vdd_logic>; +}; + +&hdmi { + status = "okay"; +}; + +&hdmiphy { + status = "okay"; +}; + +&hdmi_sound { + status = "okay"; +}; + +&i2c1 { + clock-frequency = <1000000>; + i2c-scl-falling-time-ns = <5>; + i2c-scl-rising-time-ns = <83>; + status = "okay"; + + pmic@18 { + compatible = "rockchip,rk805"; + reg = <0x18>; + interrupt-parent = <&gpio2>; + interrupts = <RK_PA6 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int_l>; + rockchip,system-power-controller; + wakeup-source; + + vcc1-supply = <&vcc_sys>; + vcc2-supply = <&vcc_sys>; + vcc3-supply = <&vcc_sys>; + vcc4-supply = <&vcc_sys>; + vcc5-supply = <&vcc_io>; + vcc6-supply = <&vcc_io>; + + regulators { + vdd_logic: DCDC_REG1 { + regulator-name = "vdd_logic"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + + vdd_arm: DCDC_REG2 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <950000>; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_io: DCDC_REG4 { + regulator-name = "vcc_io"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vdd_18: LDO_REG1 { + regulator-name = "vdd_18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc18_emmc: LDO_REG2 { + regulator-name = "vcc_18emmc"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd_11: LDO_REG3 { + regulator-name = "vdd_11"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1100000>; + }; + }; + }; + }; +}; + +&i2s0 { + status = "okay"; +}; + +&i2s1 { + status = "okay"; +}; + +&io_domains { + vccio1-supply = <&vcc_io>; + vccio2-supply = <&vcc18_emmc>; + vccio3-supply = <&vcc_io>; + vccio4-supply = <&vdd_18>; + vccio5-supply = <&vcc_io>; + vccio6-supply = <&vdd_18>; + pmuio-supply = <&vcc_io>; + status = "okay"; +}; + +&pinctrl { + pmic { + pmic_int_l: pmic-int-l { + rockchip,pins = <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + usb3 { + usb30_host_drv: usb30-host-drv { + rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + wifi { + bt_dis: bt-dis { + rockchip,pins = <2 RK_PC5 RK_FUNC_GPIO &pcfg_output_low>; + }; + + bt_wake_host: bt-wake-host { + rockchip,pins = <2 RK_PC0 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + chip_en: chip-en { + rockchip,pins = <2 RK_PC3 RK_FUNC_GPIO &pcfg_output_low>; + }; + + host_wake_bt: host-wake-bt { + rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_output_high>; + }; + + wl_dis: wl-dis { + rockchip,pins = <3 RK_PB0 RK_FUNC_GPIO &pcfg_output_low>; + }; + + wl_wake_host: wl-wake-host { + rockchip,pins = <3 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; +}; + +&sdmmc { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + disable-wp; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc0_clk &sdmmc0_cmd &sdmmc0_dectn &sdmmc0_bus4>; + vmmc-supply = <&vcc_io>; + vqmmc-supply = <&vcc_io>; + status = "okay"; +}; + +&tsadc { + rockchip,hw-tshut-mode = <0>; + rockchip,hw-tshut-polarity = <0>; + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&u2phy { + status = "okay"; +}; + +&u2phy_host { + status = "okay"; +}; + +&u2phy_otg { + status = "okay"; +}; + +&usb20_otg { + dr_mode = "host"; + status = "okay"; +}; + +&usb_host0_ehci { + pinctrl-names = "default"; + pinctrl-0 = <&bt_dis &bt_wake_host &chip_en &host_wake_bt &wl_dis &wl_wake_host>; + status = "okay"; +}; + +&vop { + status = "okay"; +}; + +&vop_mmu { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts b/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts index bb40c163b05d..8d553c92182a 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts +++ b/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts @@ -35,6 +35,7 @@ gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&sdmmc0m1_gpio>; + regulator-boot-on; regulator-name = "vcc_sd"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; diff --git a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts index 7cfd5ca6cc85..62936b432f9a 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts +++ b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts @@ -34,10 +34,9 @@ vcc_host_5v: vcc-host-5v-regulator { compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>; + gpio = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; - pinctrl-0 = <&usb30_host_drv>; + pinctrl-0 = <&usb20_host_drv>; regulator-name = "vcc_host_5v"; regulator-always-on; regulator-boot-on; @@ -320,12 +319,6 @@ rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; }; }; - - usb3 { - usb30_host_drv: usb30-host-drv { - rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; }; &sdmmc { diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi index e9fefd8a7e02..1f53ead52c7f 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi @@ -41,6 +41,7 @@ reg = <0x0 0x0>; clocks = <&cru ARMCLK>; #cooling-cells = <2>; + cpu-idle-states = <&CPU_SLEEP>; dynamic-power-coefficient = <120>; enable-method = "psci"; next-level-cache = <&l2>; @@ -53,6 +54,7 @@ reg = <0x0 0x1>; clocks = <&cru ARMCLK>; #cooling-cells = <2>; + cpu-idle-states = <&CPU_SLEEP>; dynamic-power-coefficient = <120>; enable-method = "psci"; next-level-cache = <&l2>; @@ -65,6 +67,7 @@ reg = <0x0 0x2>; clocks = <&cru ARMCLK>; #cooling-cells = <2>; + cpu-idle-states = <&CPU_SLEEP>; dynamic-power-coefficient = <120>; enable-method = "psci"; next-level-cache = <&l2>; @@ -77,12 +80,26 @@ reg = <0x0 0x3>; clocks = <&cru ARMCLK>; #cooling-cells = <2>; + cpu-idle-states = <&CPU_SLEEP>; dynamic-power-coefficient = <120>; enable-method = "psci"; next-level-cache = <&l2>; operating-points-v2 = <&cpu0_opp_table>; }; + idle-states { + entry-method = "psci"; + + CPU_SLEEP: cpu-sleep { + compatible = "arm,idle-state"; + local-timer-stop; + arm,psci-suspend-param = <0x0010000>; + entry-latency-us = <120>; + exit-latency-us = <250>; + min-residency-us = <900>; + }; + }; + l2: l2-cache0 { compatible = "cache"; }; @@ -142,6 +159,22 @@ }; }; + analog_sound: analog-sound { + compatible = "simple-audio-card"; + simple-audio-card,format = "i2s"; + simple-audio-card,mclk-fs = <256>; + simple-audio-card,name = "Analog"; + status = "disabled"; + + simple-audio-card,cpu { + sound-dai = <&i2s1>; + }; + + simple-audio-card,codec { + sound-dai = <&codec>; + }; + }; + arm-pmu { compatible = "arm,cortex-a53-pmu"; interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, @@ -156,6 +189,22 @@ ports = <&vop_out>; }; + hdmi_sound: hdmi-sound { + compatible = "simple-audio-card"; + simple-audio-card,format = "i2s"; + simple-audio-card,mclk-fs = <128>; + simple-audio-card,name = "HDMI"; + status = "disabled"; + + simple-audio-card,cpu { + sound-dai = <&i2s0>; + }; + + simple-audio-card,codec { + sound-dai = <&hdmi>; + }; + }; + psci { compatible = "arm,psci-1.0", "arm,psci-0.2"; method = "smc"; @@ -278,6 +327,7 @@ }; pd_vpu@RK3328_PD_VPU { reg = <RK3328_PD_VPU>; + clocks = <&cru ACLK_VPU>, <&cru HCLK_VPU>; }; }; @@ -596,6 +646,17 @@ status = "disabled"; }; + vpu: video-codec@ff350000 { + compatible = "rockchip,rk3328-vpu"; + reg = <0x0 0xff350000 0x0 0x800>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "vdpu"; + clocks = <&cru ACLK_VPU>, <&cru HCLK_VPU>; + clock-names = "aclk", "hclk"; + iommus = <&vpu_mmu>; + power-domains = <&power RK3328_PD_VPU>; + }; + vpu_mmu: iommu@ff350800 { compatible = "rockchip,iommu"; reg = <0x0 0xff350800 0x0 0x40>; @@ -604,7 +665,7 @@ clocks = <&cru ACLK_VPU>, <&cru HCLK_VPU>; clock-names = "aclk", "iface"; #iommu-cells = <0>; - status = "disabled"; + power-domains = <&power RK3328_PD_VPU>; }; rkvdec_mmu: iommu@ff360480 { @@ -793,7 +854,7 @@ }; }; - sdmmc: dwmmc@ff500000 { + sdmmc: mmc@ff500000 { compatible = "rockchip,rk3328-dw-mshc", "rockchip,rk3288-dw-mshc"; reg = <0x0 0xff500000 0x0 0x4000>; interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; @@ -801,10 +862,11 @@ <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>; clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; fifo-depth = <0x100>; + max-frequency = <150000000>; status = "disabled"; }; - sdio: dwmmc@ff510000 { + sdio: mmc@ff510000 { compatible = "rockchip,rk3328-dw-mshc", "rockchip,rk3288-dw-mshc"; reg = <0x0 0xff510000 0x0 0x4000>; interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; @@ -812,10 +874,11 @@ <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>; clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; fifo-depth = <0x100>; + max-frequency = <150000000>; status = "disabled"; }; - emmc: dwmmc@ff520000 { + emmc: mmc@ff520000 { compatible = "rockchip,rk3328-dw-mshc", "rockchip,rk3288-dw-mshc"; reg = <0x0 0xff520000 0x0 0x4000>; interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; @@ -823,6 +886,7 @@ <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>; clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; fifo-depth = <0x100>; + max-frequency = <150000000>; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3368-lion-haikou.dts b/arch/arm64/boot/dts/rockchip/rk3368-lion-haikou.dts index 8251f3c0d0a8..cbde279ae81d 100644 --- a/arch/arm64/boot/dts/rockchip/rk3368-lion-haikou.dts +++ b/arch/arm64/boot/dts/rockchip/rk3368-lion-haikou.dts @@ -83,12 +83,6 @@ status = "okay"; }; -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>; - status = "okay"; -}; - &usb_otg { dr_mode = "otg"; status = "okay"; diff --git a/arch/arm64/boot/dts/rockchip/rk3368.dtsi b/arch/arm64/boot/dts/rockchip/rk3368.dtsi index fd86188010b2..a0df61c61925 100644 --- a/arch/arm64/boot/dts/rockchip/rk3368.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3368.dtsi @@ -204,7 +204,7 @@ #clock-cells = <0>; }; - sdmmc: dwmmc@ff0c0000 { + sdmmc: mmc@ff0c0000 { compatible = "rockchip,rk3368-dw-mshc", "rockchip,rk3288-dw-mshc"; reg = <0x0 0xff0c0000 0x0 0x4000>; max-frequency = <150000000>; @@ -218,7 +218,7 @@ status = "disabled"; }; - sdio0: dwmmc@ff0d0000 { + sdio0: mmc@ff0d0000 { compatible = "rockchip,rk3368-dw-mshc", "rockchip,rk3288-dw-mshc"; reg = <0x0 0xff0d0000 0x0 0x4000>; max-frequency = <150000000>; @@ -232,7 +232,7 @@ status = "disabled"; }; - emmc: dwmmc@ff0f0000 { + emmc: mmc@ff0f0000 { compatible = "rockchip,rk3368-dw-mshc", "rockchip,rk3288-dw-mshc"; reg = <0x0 0xff0f0000 0x0 0x4000>; max-frequency = <150000000>; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts b/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts index c706db0ee9ec..d63faf38cc81 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts @@ -206,7 +206,7 @@ regulator-name = "vdd_log"; regulator-always-on; regulator-boot-on; - regulator-min-microvolt = <800000>; + regulator-min-microvolt = <430000>; regulator-max-microvolt = <1400000>; vin-supply = <&vcc_sys>; }; @@ -660,7 +660,6 @@ keep-power-in-suspend; mmc-pwrseq = <&sdio_pwrseq>; non-removable; - num-slots = <1>; pinctrl-names = "default"; pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>; sd-uhs-sdr104; @@ -669,9 +668,12 @@ vqmmc-supply = &vcc1v8_s3; /* IO line */ vmmc-supply = &vcc_sdio; /* card's power */ + #address-cells = <1>; + #size-cells = <0>; status = "okay"; brcmf: wifi@1 { + reg = <1>; compatible = "brcm,bcm4329-fmac"; interrupt-parent = <&gpio0>; interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts b/arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts index a9f4d6d7d2b7..e6c1c94c8d69 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts @@ -18,7 +18,7 @@ "google,bob", "google,gru", "rockchip,rk3399"; edp_panel: edp-panel { - compatible = "boe,nv101wxmn51", "simple-panel"; + compatible = "boe,nv101wxmn51"; backlight = <&backlight>; power-supply = <&pp3300_disp>; @@ -68,6 +68,16 @@ &spi0 { status = "okay"; + + cr50@0 { + compatible = "google,cr50"; + reg = <0>; + interrupt-parent = <&gpio0>; + interrupts = <5 IRQ_TYPE_EDGE_RISING>; + pinctrl-names = "default"; + pinctrl-0 = <&h1_int_od_l>; + spi-max-frequency = <800000>; + }; }; &pinctrl { diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts b/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts index 3e2272b56eb7..2bbef9fcbe27 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts @@ -39,10 +39,24 @@ }; edp_panel: edp-panel { - compatible = "sharp,lq123p1jx31", "simple-panel"; + compatible = "sharp,lq123p1jx31"; backlight = <&backlight>; power-supply = <&pp3300_disp>; + panel-timing { + clock-frequency = <266666667>; + hactive = <2400>; + hfront-porch = <48>; + hback-porch = <84>; + hsync-len = <32>; + hsync-active = <0>; + vactive = <1600>; + vfront-porch = <3>; + vback-porch = <120>; + vsync-len = <10>; + vsync-active = <0>; + }; + port { panel_in_edp: endpoint { remote-endpoint = <&edp_out_panel>; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi index 50dfab51f175..4373ed732af7 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi @@ -436,6 +436,16 @@ camera: &i2c7 { &spi2 { status = "okay"; + + cr50@0 { + compatible = "google,cr50"; + reg = <0>; + interrupt-parent = <&gpio1>; + interrupts = <17 IRQ_TYPE_EDGE_RISING>; + pinctrl-names = "default"; + pinctrl-0 = <&h1_int_od_l>; + spi-max-frequency = <800000>; + }; }; &usb_host0_ohci { diff --git a/arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dts b/arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dts index 0d1f5f9a0de9..d69a613fb65a 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dts @@ -556,7 +556,6 @@ &sdmmc { clock-frequency = <150000000>; clock-freq-min-max = <200000 150000000>; - supports-sd; bus-width = <4>; cap-mmc-highspeed; cap-sd-highspeed; @@ -572,7 +571,6 @@ bus-width = <8>; mmc-hs400-1_8v; mmc-hs400-enhanced-strobe; - supports-emmc; non-removable; keep-power-in-suspend; status = "okay"; @@ -644,7 +642,7 @@ status = "okay"; u2phy0_host: host-port { - phy-supply = <&vcc5v0_host>; + phy-supply = <&vcc5v0_typec>; status = "okay"; }; @@ -712,7 +710,7 @@ &usbdrd_dwc3_0 { status = "okay"; - dr_mode = "otg"; + dr_mode = "host"; }; &usbdrd3_1 { diff --git a/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi index 4944d78a0a1c..e87a04477440 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi @@ -654,9 +654,12 @@ sd-uhs-sdr104; vqmmc-supply = <&vcc1v8_s3>; vmmc-supply = <&vccio_sd>; + #address-cells = <1>; + #size-cells = <0>; status = "okay"; brcmf: wifi@1 { + reg = <1>; compatible = "brcm,bcm4329-fmac"; interrupt-parent = <&gpio0>; interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-leez-p710.dts b/arch/arm64/boot/dts/rockchip/rk3399-leez-p710.dts new file mode 100644 index 000000000000..73be38a53796 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3399-leez-p710.dts @@ -0,0 +1,645 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 Andy Yan <andy.yan@gmail.com> + */ + +/dts-v1/; +#include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/pwm/pwm.h> +#include "rk3399.dtsi" +#include "rk3399-opp.dtsi" + +/ { + model = "Leez RK3399 P710"; + compatible = "leez,p710", "rockchip,rk3399"; + + chosen { + stdout-path = "serial2:1500000n8"; + }; + + clkin_gmac: external-gmac-clock { + compatible = "fixed-clock"; + clock-frequency = <125000000>; + clock-output-names = "clkin_gmac"; + #clock-cells = <0>; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&rk808 1>; + clock-names = "ext_clock"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_reg_on_h>; + reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; + }; + + dc5v_adp: dc5v-adp { + compatible = "regulator-fixed"; + regulator-name = "dc5v_adapter"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + vcc3v3_lan: vcc3v3-lan { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_lan"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vim-supply = <&vcc3v3_sys>; + }; + + vcc3v3_sys: vcc3v3-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc5v0_host0: vcc5v0_host1: vcc5v0-host { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_host"; + regulator-boot-on; + regulator-always-on; + regulator-min-microvolt = <5500000>; + regulator-max-microvolt = <5500000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc5v0_host3: vcc5v0-host3 { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_host3"; + enable-active-high; + gpio = <&gpio2 RK_PA2 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_host3_en>; + regulator-always-on; + vin-supply = <&vcc5v0_sys>; + }; + + vcc5v0_sys: vcc5v0-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&dc5v_adp>; + }; + + vdd_log: vdd-log { + compatible = "pwm-regulator"; + pwms = <&pwm2 0 25000 1>; + regulator-name = "vdd_log"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + vin-supply = <&vcc5v0_sys>; + }; +}; + +&cpu_l0 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l1 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l2 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l3 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_b0 { + cpu-supply = <&vdd_cpu_b>; +}; + +&cpu_b1 { + cpu-supply = <&vdd_cpu_b>; +}; + +&emmc_phy { + status = "okay"; +}; + +&gmac { + assigned-clocks = <&cru SCLK_RMII_SRC>; + assigned-clock-parents = <&clkin_gmac>; + clock_in_out = "input"; + phy-supply = <&vcc3v3_lan>; + phy-mode = "rgmii"; + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins>; + snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; + snps,reset-active-low; + snps,reset-delays-us = <0 10000 50000>; + tx_delay = <0x28>; + rx_delay = <0x11>; + status = "okay"; +}; + +&gpu { + mali-supply = <&vdd_gpu>; + status = "okay"; +}; + +&hdmi { + ddc-i2c-bus = <&i2c7>; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_cec>; + status = "okay"; +}; + +&hdmi_sound { + status = "okay"; +}; + +&i2c0 { + clock-frequency = <400000>; + i2c-scl-rising-time-ns = <168>; + i2c-scl-falling-time-ns = <4>; + status = "okay"; + + rk808: pmic@1b { + compatible = "rockchip,rk808"; + reg = <0x1b>; + interrupt-parent = <&gpio1>; + interrupts = <21 IRQ_TYPE_LEVEL_LOW>; + #clock-cells = <1>; + clock-output-names = "xin32k", "rk808-clkout2"; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int_l>; + rockchip,system-power-controller; + wakeup-source; + + vcc1-supply = <&vcc5v0_sys>; + vcc2-supply = <&vcc5v0_sys>; + vcc3-supply = <&vcc5v0_sys>; + vcc4-supply = <&vcc5v0_sys>; + vcc6-supply = <&vcc5v0_sys>; + vcc7-supply = <&vcc5v0_sys>; + vcc8-supply = <&vcc3v3_sys>; + vcc9-supply = <&vcc5v0_sys>; + vcc10-supply = <&vcc5v0_sys>; + vcc11-supply = <&vcc5v0_sys>; + vcc12-supply = <&vcc3v3_sys>; + vddio-supply = <&vcc_1v8>; + + regulators { + vdd_center: DCDC_REG1 { + regulator-name = "vdd_center"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_l: DCDC_REG2 { + regulator-name = "vdd_cpu_l"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_1v8: DCDC_REG4 { + regulator-name = "vcc_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc1v8_dvp: LDO_REG1 { + regulator-name = "vcc1v8_dvp"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc1v8_hdmi: LDO_REG2 { + regulator-name = "vcc1v8_hdmi"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcca_1v8: LDO_REG3 { + regulator-name = "vcca_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vccio_sd: LDO_REG4 { + regulator-name = "vccio_sd"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3000000>; + }; + }; + + vcca3v0_codec: LDO_REG5 { + regulator-name = "vcca3v0_codec"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v5: LDO_REG6 { + regulator-name = "vcc_1v5"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1500000>; + }; + }; + + vcc0v9_hdmi: LDO_REG7 { + regulator-name = "vcc0v9_hdmi"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v0: LDO_REG8 { + regulator-name = "vcc_3v0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3000000>; + }; + }; + }; + }; + + vdd_cpu_b: regulator@40 { + compatible = "silergy,syr827"; + reg = <0x40>; + fcs,suspend-voltage-selector = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&vsel1_gpio>; + regulator-name = "vdd_cpu_b"; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1500000>; + regulator-ramp-delay = <1000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_gpu: regulator@41 { + compatible = "silergy,syr828"; + reg = <0x41>; + fcs,suspend-voltage-selector = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&vsel2_gpio>; + regulator-name = "vdd_gpu"; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1500000>; + regulator-ramp-delay = <1000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; +}; + +&i2c1 { + i2c-scl-rising-time-ns = <300>; + i2c-scl-falling-time-ns = <15>; + status = "okay"; +}; + +&i2c3 { + i2c-scl-rising-time-ns = <450>; + i2c-scl-falling-time-ns = <15>; + status = "okay"; +}; + +&i2c4 { + i2c-scl-rising-time-ns = <600>; + i2c-scl-falling-time-ns = <20>; + status = "okay"; +}; + +&i2c7 { + status = "okay"; +}; + +&i2s0 { + rockchip,playback-channels = <8>; + rockchip,capture-channels = <8>; + status = "okay"; +}; + +&i2s1 { + rockchip,playback-channels = <2>; + rockchip,capture-channels = <2>; + status = "okay"; +}; + +&i2s2 { + status = "okay"; +}; + +&io_domains { + status = "okay"; + + bt656-supply = <&vcc1v8_dvp>; + audio-supply = <&vcc_1v8>; + sdmmc-supply = <&vccio_sd>; + gpio1830-supply = <&vcc_3v0>; +}; + +&pmu_io_domains { + status = "okay"; + pmu1830-supply = <&vcc_3v0>; +}; + +&pinctrl { + bt { + bt_reg_on_h: bt-reg-on-h { + rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_host_wake_l: bt-host-wake-l { + rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_wake_l: bt-wake-l { + rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pmic { + pmic_int_l: pmic-int-l { + rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + vsel1_gpio: vsel1-gpio { + rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>; + }; + + vsel2_gpio: vsel2-gpio { + rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; + + usb2 { + vcc5v0_host3_en: vcc5v0-host3-en { + rockchip,pins = <2 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + wifi { + wifi_reg_on_h: wifi-reg-on-h { + rockchip,pins = + <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + wifi_host_wake_l: wifi-host-wake-l { + rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&pwm2 { + status = "okay"; +}; + +&saradc { + status = "okay"; + + vref-supply = <&vcc_1v8>; +}; + +&sdio0 { + #address-cells = <1>; + #size-cells = <0>; + bus-width = <4>; + clock-frequency = <50000000>; + cap-sdio-irq; + cap-sd-highspeed; + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>; + sd-uhs-sdr104; + status = "okay"; + + brcmf: wifi@1 { + compatible = "brcm,bcm4329-fmac"; + reg = <1>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>; + interrupt-names = "host-wake"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_host_wake_l>; + }; +}; + +&sdhci { + bus-width = <8>; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; + non-removable; + status = "okay"; +}; + +&sdmmc { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>; + disable-wp; + max-frequency = <150000000>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_clk &sdmmc_cd &sdmmc_cmd &sdmmc_bus4>; + status = "okay"; +}; + +&tcphy0 { + status = "okay"; +}; + +&tcphy1 { + status = "okay"; +}; + +&tsadc { + status = "okay"; + + /* tshut mode 0:CRU 1:GPIO */ + rockchip,hw-tshut-mode = <1>; + /* tshut polarity 0:LOW 1:HIGH */ + rockchip,hw-tshut-polarity = <1>; +}; + +&u2phy0 { + status = "okay"; + + u2phy0_otg: otg-port { + status = "okay"; + }; + + u2phy0_host: host-port { + phy-supply = <&vcc5v0_host0>; + status = "okay"; + }; +}; + +&u2phy1 { + status = "okay"; + + u2phy1_otg: otg-port { + status = "okay"; + }; + + u2phy1_host: host-port { + phy-supply = <&vcc5v0_host1>; + status = "okay"; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + clocks = <&rk808 1>; + clock-names = "ext_clock"; + device-wakeup-gpios = <&gpio2 RK_PD2 GPIO_ACTIVE_HIGH>; + host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_reg_on_h>; + }; +}; + +&uart2 { + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +}; + +&usbdrd3_0 { + status = "okay"; +}; + +&usbdrd_dwc3_0 { + status = "okay"; + dr_mode = "otg"; +}; + +&usbdrd3_1 { + status = "okay"; +}; + +&usbdrd_dwc3_1 { + status = "okay"; + dr_mode = "host"; +}; + +&vopb { + status = "okay"; +}; + +&vopb_mmu { + status = "okay"; +}; + +&vopl { + status = "okay"; +}; + +&vopl_mmu { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-nanopc-t4.dts b/arch/arm64/boot/dts/rockchip/rk3399-nanopc-t4.dts index 2a127985ab17..e0d75617bb7e 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-nanopc-t4.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopc-t4.dts @@ -94,31 +94,9 @@ }; }; -&gpu_thermal { - trips { - gpu_warm: gpu_warm { - temperature = <55000>; - hysteresis = <2000>; - type = "active"; - }; - - gpu_hot: gpu_hot { - temperature = <65000>; - hysteresis = <2000>; - type = "active"; - }; - }; - cooling-maps { - map1 { - trip = <&gpu_warm>; - cooling-device = <&fan THERMAL_NO_LIMIT 1>; - }; - - map2 { - trip = <&gpu_hot>; - cooling-device = <&fan 2 THERMAL_NO_LIMIT>; - }; - }; +&pcie0 { + num-lanes = <4>; + vpcie3v3-supply = <&vcc3v3_sys>; }; &pinctrl { diff --git a/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi index dd16c80d923e..c88018a0ef35 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi @@ -48,7 +48,7 @@ }; /* switched by pmic_sleep */ - vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 { + vcc1v8_s3: vcc1v8-s3 { compatible = "regulator-fixed"; regulator-always-on; regulator-boot-on; @@ -71,6 +71,27 @@ vin-supply = <&vcc3v3_sys>; }; + /* + * Really, this is supplied by vcc_1v8, and vcc1v8_s3 only + * drives the enable pin, but we can't quite model that. + */ + vcca0v9_s3: vcca0v9-s3 { + compatible = "regulator-fixed"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-name = "vcca0v9_s3"; + vin-supply = <&vcc1v8_s3>; + }; + + /* As above, actually supplied by vcc3v3_sys */ + vcca1v8_s3: vcca1v8-s3 { + compatible = "regulator-fixed"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcca1v8_s3"; + vin-supply = <&vcc1v8_s3>; + }; + vbus_typec: vbus-typec { compatible = "regulator-fixed"; regulator-min-microvolt = <5000000>; @@ -152,9 +173,6 @@ phy-handle = <&rtl8211e>; phy-mode = "rgmii"; phy-supply = <&vcc3v3_s3>; - snps,reset-active-low; - snps,reset-delays-us = <0 10000 30000>; - snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; tx_delay = <0x28>; rx_delay = <0x11>; status = "okay"; @@ -168,6 +186,9 @@ reg = <1>; interrupt-parent = <&gpio3>; interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <30000>; + reset-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; }; }; }; @@ -184,6 +205,10 @@ status = "okay"; }; +&hdmi_sound { + status = "okay"; +}; + &i2c0 { clock-frequency = <400000>; i2c-scl-rising-time-ns = <160>; @@ -459,6 +484,10 @@ status = "okay"; }; +&i2s2 { + status = "okay"; +}; + &io_domains { bt656-supply = <&vcc_1v8>; audio-supply = <&vcca1v8_codec>; @@ -477,7 +506,9 @@ &pcie0 { ep-gpios = <&gpio2 RK_PA4 GPIO_ACTIVE_HIGH>; max-link-speed = <2>; - num-lanes = <4>; + num-lanes = <2>; + vpcie0v9-supply = <&vcca0v9_s3>; + vpcie1v8-supply = <&vcca1v8_s3>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts b/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts index 0541dfce924d..9c659f3115c8 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts @@ -648,9 +648,12 @@ pinctrl-names = "default"; pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>; sd-uhs-sdr104; + #address-cells = <1>; + #size-cells = <0>; status = "okay"; brcmf: wifi@1 { + reg = <1>; compatible = "brcm,bcm4329-fmac"; interrupt-parent = <&gpio0>; interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi index 62ea288a1a70..c1edca3872c7 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi @@ -165,6 +165,11 @@ status = "okay"; }; +&gpu { + mali-supply = <&vdd_gpu>; + status = "okay"; +}; + &i2c0 { status = "okay"; i2c-scl-rising-time-ns = <168>; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezzanine.dts b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezzanine.dts new file mode 100644 index 000000000000..2acb3d500fb9 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-mezzanine.dts @@ -0,0 +1,93 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2017 T-Chip Intelligent Technology Co., Ltd + * Copyright (c) 2019 Markus Reichl <m.reichl@fivetechno.de> + */ + +/dts-v1/; +#include "rk3399-roc-pc.dtsi" + +/ { + model = "Firefly ROC-RK3399-PC Mezzanine Board"; + compatible = "firefly,roc-rk3399-pc-mezzanine", "rockchip,rk3399"; + + vcc3v3_ngff: vcc3v3-ngff { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_ngff"; + enable-active-high; + gpio = <&gpio4 RK_PD3 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc3v3_ngff_en>; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&dc_12v>; + }; + + vcc3v3_pcie: vcc3v3-pcie { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_pcie"; + enable-active-high; + gpio = <&gpio1 RK_PC1 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc3v3_pcie_en>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&dc_12v>; + }; +}; + +&pcie_phy { + status = "okay"; +}; + +&pcie0 { + ep-gpios = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>; + num-lanes = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie_perst>; + vpcie3v3-supply = <&vcc3v3_pcie>; + vpcie1v8-supply = <&vcc1v8_pmu>; + vpcie0v9-supply = <&vcca_0v9>; + status = "okay"; +}; + +&pinctrl { + ngff { + vcc3v3_ngff_en: vcc3v3-ngff-en { + rockchip,pins = <4 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pcie { + vcc3v3_pcie_en: vcc3v3-pcie-en { + rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + pcie_perst: pcie-perst { + rockchip,pins = <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&sdio0 { + bus-width = <4>; + cap-sd-highspeed; + cap-sdio-irq; + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>; + sd-uhs-sdr104; + vmmc-supply = <&vcc3v3_ngff>; + vqmmc-supply = <&vcc_1v8>; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dts b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dts index 19f7732d728c..cd4195425309 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dts @@ -4,677 +4,9 @@ */ /dts-v1/; -#include <dt-bindings/pwm/pwm.h> -#include "rk3399.dtsi" -#include "rk3399-opp.dtsi" +#include "rk3399-roc-pc.dtsi" / { model = "Firefly ROC-RK3399-PC Board"; compatible = "firefly,roc-rk3399-pc", "rockchip,rk3399"; - - chosen { - stdout-path = "serial2:1500000n8"; - }; - - backlight: backlight { - compatible = "pwm-backlight"; - pwms = <&pwm0 0 25000 0>; - }; - - clkin_gmac: external-gmac-clock { - compatible = "fixed-clock"; - clock-frequency = <125000000>; - clock-output-names = "clkin_gmac"; - #clock-cells = <0>; - }; - - sdio_pwrseq: sdio-pwrseq { - compatible = "mmc-pwrseq-simple"; - clocks = <&rk808 1>; - clock-names = "ext_clock"; - pinctrl-names = "default"; - pinctrl-0 = <&wifi_enable_h>; - - /* - * On the module itself this is one of these (depending - * on the actual card populated): - * - SDIO_RESET_L_WL_REG_ON - * - PDN (power down when low) - */ - reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; - }; - - vcc_vbus_typec0: vcc-vbus-typec0 { - compatible = "regulator-fixed"; - regulator-name = "vcc_vbus_typec0"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; - - /* - * should be placed inside mp8859, but not until mp8859 has - * its own dt-binding. - */ - vcc12v_sys: mp8859-dcdc1 { - compatible = "regulator-fixed"; - regulator-name = "vcc12v_sys"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - vin-supply = <&vcc_vbus_typec0>; - }; - - /* switched by pmic_sleep */ - vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 { - compatible = "regulator-fixed"; - regulator-name = "vcc1v8_s3"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vcc_1v8>; - }; - - vcc3v3_sys: vcc3v3-sys { - compatible = "regulator-fixed"; - regulator-name = "vcc3v3_sys"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vcc12v_sys>; - }; - - /* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */ - vcc5v0_host: vcc5v0-host-regulator { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&vcc5v0_host_en &hub_rst>; - regulator-name = "vcc5v0_host"; - regulator-always-on; - vin-supply = <&vcc_sys>; - }; - - vcc_vbus_typec1: vcc-vbus-typec1 { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&vcc_vbus_typec1_en>; - regulator-name = "vcc_vbus_typec1"; - regulator-always-on; - vin-supply = <&vcc_sys>; - }; - - vcc_sys: vcc-sys { - compatible = "regulator-fixed"; - regulator-name = "vcc_sys"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&vcc12v_sys>; - }; - - vdd_log: vdd-log { - compatible = "pwm-regulator"; - pwms = <&pwm2 0 25000 1>; - regulator-name = "vdd_log"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1400000>; - vin-supply = <&vcc3v3_sys>; - }; -}; - -&cpu_l0 { - cpu-supply = <&vdd_cpu_l>; -}; - -&cpu_l1 { - cpu-supply = <&vdd_cpu_l>; -}; - -&cpu_l2 { - cpu-supply = <&vdd_cpu_l>; -}; - -&cpu_l3 { - cpu-supply = <&vdd_cpu_l>; -}; - -&cpu_b0 { - cpu-supply = <&vdd_cpu_b>; -}; - -&cpu_b1 { - cpu-supply = <&vdd_cpu_b>; -}; - -&emmc_phy { - status = "okay"; -}; - -&gmac { - assigned-clocks = <&cru SCLK_RMII_SRC>; - assigned-clock-parents = <&clkin_gmac>; - clock_in_out = "input"; - phy-supply = <&vcc_lan>; - phy-mode = "rgmii"; - pinctrl-names = "default"; - pinctrl-0 = <&rgmii_pins>; - snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; - snps,reset-active-low; - snps,reset-delays-us = <0 10000 50000>; - tx_delay = <0x28>; - rx_delay = <0x11>; - status = "okay"; -}; - -&hdmi { - ddc-i2c-bus = <&i2c3>; - pinctrl-names = "default"; - pinctrl-0 = <&hdmi_cec>; - status = "okay"; -}; - -&i2c0 { - clock-frequency = <400000>; - i2c-scl-rising-time-ns = <168>; - i2c-scl-falling-time-ns = <4>; - status = "okay"; - - rk808: pmic@1b { - compatible = "rockchip,rk808"; - reg = <0x1b>; - interrupt-parent = <&gpio1>; - interrupts = <21 IRQ_TYPE_LEVEL_LOW>; - #clock-cells = <1>; - clock-output-names = "xin32k", "rk808-clkout2"; - pinctrl-names = "default"; - pinctrl-0 = <&pmic_int_l>; - rockchip,system-power-controller; - wakeup-source; - - vcc1-supply = <&vcc3v3_sys>; - vcc2-supply = <&vcc3v3_sys>; - vcc3-supply = <&vcc3v3_sys>; - vcc4-supply = <&vcc3v3_sys>; - vcc6-supply = <&vcc3v3_sys>; - vcc7-supply = <&vcc3v3_sys>; - vcc8-supply = <&vcc3v3_sys>; - vcc9-supply = <&vcc3v3_sys>; - vcc10-supply = <&vcc3v3_sys>; - vcc11-supply = <&vcc3v3_sys>; - vcc12-supply = <&vcc3v3_sys>; - vddio-supply = <&vcc1v8_pmu>; - - regulators { - vdd_center: DCDC_REG1 { - regulator-name = "vdd_center"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <1350000>; - regulator-ramp-delay = <6001>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdd_cpu_l: DCDC_REG2 { - regulator-name = "vdd_cpu_l"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <1350000>; - regulator-ramp-delay = <6001>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_ddr: DCDC_REG3 { - regulator-name = "vcc_ddr"; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - vcc_1v8: DCDC_REG4 { - regulator-name = "vcc_1v8"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vcca1v8_codec: LDO_REG1 { - regulator-name = "vcca1v8_codec"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc1v8_hdmi: LDO_REG2 { - regulator-name = "vcc1v8_hdmi"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc1v8_pmu: LDO_REG3 { - regulator-name = "vcc1v8_pmu"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vcc_sdio: LDO_REG4 { - regulator-name = "vcc_sdio"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3000000>; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3000000>; - }; - }; - - vcca3v0_codec: LDO_REG5 { - regulator-name = "vcca3v0_codec"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_1v5: LDO_REG6 { - regulator-name = "vcc_1v5"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1500000>; - }; - }; - - vcca0v9_hdmi: LDO_REG7 { - regulator-name = "vcca0v9_hdmi"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <900000>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_3v0: LDO_REG8 { - regulator-name = "vcc_3v0"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3000000>; - }; - }; - - vcc3v3_s3: vcc_lan: SWITCH_REG1 { - regulator-name = "vcc3v3_s3"; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc3v3_s0: SWITCH_REG2 { - regulator-name = "vcc3v3_s0"; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - }; - }; - - vdd_cpu_b: regulator@40 { - compatible = "silergy,syr827"; - reg = <0x40>; - fcs,suspend-voltage-selector = <1>; - pinctrl-names = "default"; - pinctrl-0 = <&vsel1_gpio>; - regulator-name = "vdd_cpu_b"; - regulator-min-microvolt = <712500>; - regulator-max-microvolt = <1500000>; - regulator-ramp-delay = <1000>; - regulator-always-on; - regulator-boot-on; - vin-supply = <&vcc3v3_sys>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdd_gpu: regulator@41 { - compatible = "silergy,syr828"; - reg = <0x41>; - fcs,suspend-voltage-selector = <1>; - pinctrl-names = "default"; - pinctrl-0 = <&vsel2_gpio>; - regulator-name = "vdd_gpu"; - regulator-min-microvolt = <712500>; - regulator-max-microvolt = <1500000>; - regulator-ramp-delay = <1000>; - regulator-always-on; - regulator-boot-on; - vin-supply = <&vcc3v3_sys>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; -}; - -&i2c1 { - i2c-scl-rising-time-ns = <300>; - i2c-scl-falling-time-ns = <15>; - status = "okay"; -}; - -&i2c3 { - i2c-scl-rising-time-ns = <450>; - i2c-scl-falling-time-ns = <15>; - status = "okay"; -}; - -&i2c4 { - i2c-scl-rising-time-ns = <600>; - i2c-scl-falling-time-ns = <20>; - status = "okay"; - - fusb1: usb-typec@22 { - compatible = "fcs,fusb302"; - reg = <0x22>; - interrupt-parent = <&gpio1>; - interrupts = <1 IRQ_TYPE_LEVEL_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&fusb1_int>; - vbus-supply = <&vcc_vbus_typec1>; - status = "okay"; - }; -}; - -&i2c7 { - i2c-scl-rising-time-ns = <600>; - i2c-scl-falling-time-ns = <20>; - status = "okay"; - - fusb0: usb-typec@22 { - compatible = "fcs,fusb302"; - reg = <0x22>; - interrupt-parent = <&gpio1>; - interrupts = <2 IRQ_TYPE_LEVEL_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&fusb0_int>; - vbus-supply = <&vcc_vbus_typec0>; - status = "okay"; - }; -}; - -&i2s0 { - rockchip,playback-channels = <8>; - rockchip,capture-channels = <8>; - status = "okay"; -}; - -&i2s1 { - rockchip,playback-channels = <2>; - rockchip,capture-channels = <2>; - status = "okay"; -}; - -&i2s2 { - status = "okay"; -}; - -&io_domains { - audio-supply = <&vcca1v8_codec>; - bt656-supply = <&vcc_3v0>; - gpio1830-supply = <&vcc_3v0>; - sdmmc-supply = <&vcc_sdio>; - status = "okay"; -}; - -&pmu_io_domains { - pmu1830-supply = <&vcc_3v0>; - status = "okay"; -}; - -&pinctrl { - lcd-panel { - lcd_panel_reset: lcd-panel-reset { - rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - - pmic { - vsel1_gpio: vsel1-gpio { - rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>; - }; - - vsel2_gpio: vsel2-gpio { - rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; - }; - }; - - sdio-pwrseq { - wifi_enable_h: wifi-enable-h { - rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - pmic { - pmic_int_l: pmic-int-l { - rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - - usb2 { - vcc5v0_host_en: vcc5v0-host-en { - rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - hub_rst: hub-rst { - rockchip,pins = <2 RK_PA4 RK_FUNC_GPIO &pcfg_output_high>; - }; - }; - - usb-typec { - vcc_vbus_typec1_en: vcc-vbus-typec1-en { - rockchip,pins = <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - fusb30x { - fusb0_int: fusb0-int { - rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>; - }; - - fusb1_int: fusb1-int { - rockchip,pins = <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; -}; - -&pwm0 { - status = "okay"; -}; - -&pwm2 { - status = "okay"; -}; - -&saradc { - vref-supply = <&vcca1v8_s3>; - status = "okay"; -}; - -&sdmmc { - bus-width = <4>; - cap-mmc-highspeed; - cap-sd-highspeed; - cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>; - disable-wp; - max-frequency = <150000000>; - pinctrl-names = "default"; - pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>; - status = "okay"; -}; - -&sdhci { - bus-width = <8>; - mmc-hs400-1_8v; - mmc-hs400-enhanced-strobe; - non-removable; - status = "okay"; -}; - -&tcphy0 { - status = "okay"; -}; - -&tcphy1 { - status = "okay"; -}; - -&tsadc { - /* tshut mode 0:CRU 1:GPIO */ - rockchip,hw-tshut-mode = <1>; - /* tshut polarity 0:LOW 1:HIGH */ - rockchip,hw-tshut-polarity = <1>; - status = "okay"; -}; - -&u2phy0 { - status = "okay"; - - u2phy0_otg: otg-port { - phy-supply = <&vcc_vbus_typec0>; - status = "okay"; - }; - - u2phy0_host: host-port { - phy-supply = <&vcc5v0_host>; - status = "okay"; - }; -}; - -&u2phy1 { - status = "okay"; - - u2phy1_otg: otg-port { - phy-supply = <&vcc_vbus_typec1>; - status = "okay"; - }; - - u2phy1_host: host-port { - phy-supply = <&vcc5v0_host>; - status = "okay"; - }; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_xfer &uart0_cts>; - status = "okay"; -}; - -&uart2 { - status = "okay"; -}; - -&usb_host0_ehci { - status = "okay"; -}; - -&usb_host0_ohci { - status = "okay"; -}; - -&usb_host1_ehci { - status = "okay"; -}; - -&usb_host1_ohci { - status = "okay"; -}; - -&usbdrd3_0 { - status = "okay"; -}; - -&usbdrd_dwc3_0 { - status = "okay"; -}; - -&usbdrd3_1 { - status = "okay"; -}; - -&usbdrd_dwc3_1 { - status = "okay"; - dr_mode = "host"; -}; - -&vopb { - status = "okay"; -}; - -&vopb_mmu { - status = "okay"; -}; - -&vopl { - status = "okay"; -}; - -&vopl_mmu { - status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi new file mode 100644 index 000000000000..9f225e9c3d54 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi @@ -0,0 +1,814 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2017 T-Chip Intelligent Technology Co., Ltd + */ + +/dts-v1/; +#include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/pwm/pwm.h> +#include "rk3399.dtsi" +#include "rk3399-opp.dtsi" + +/ { + model = "Firefly ROC-RK3399-PC Board"; + compatible = "firefly,roc-rk3399-pc", "rockchip,rk3399"; + + chosen { + stdout-path = "serial2:1500000n8"; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm0 0 25000 0>; + }; + + clkin_gmac: external-gmac-clock { + compatible = "fixed-clock"; + clock-frequency = <125000000>; + clock-output-names = "clkin_gmac"; + #clock-cells = <0>; + }; + + adc-keys { + compatible = "adc-keys"; + io-channels = <&saradc 1>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1500000>; + poll-interval = <100>; + + recovery { + label = "Recovery"; + linux,code = <KEY_VENDOR>; + press-threshold-microvolt = <18000>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + autorepeat; + pinctrl-names = "default"; + pinctrl-0 = <&pwr_key_l>; + + power { + debounce-interval = <100>; + gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; + label = "GPIO Key Power"; + linux,code = <KEY_POWER>; + wakeup-source; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&work_led_gpio>, <&diy_led_gpio>, <&yellow_led_gpio>; + + work-led { + label = "green:work"; + gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>; + default-state = "on"; + linux,default-trigger = "heartbeat"; + }; + + diy-led { + label = "red:diy"; + gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>; + default-state = "off"; + linux,default-trigger = "mmc1"; + }; + + yellow-led { + label = "yellow:yellow-led"; + gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>; + default-state = "off"; + linux,default-trigger = "mmc0"; + }; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&rk808 1>; + clock-names = "ext_clock"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_enable_h>; + + /* + * On the module itself this is one of these (depending + * on the actual card populated): + * - SDIO_RESET_L_WL_REG_ON + * - PDN (power down when low) + */ + reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; + }; + + vcc_vbus_typec0: vcc-vbus-typec0 { + compatible = "regulator-fixed"; + regulator-name = "vcc_vbus_typec0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + /* switched by pmic_sleep */ + vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 { + compatible = "regulator-fixed"; + regulator-name = "vcc1v8_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_1v8>; + }; + + vcc3v0_sd: vcc3v0-sd { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio4 RK_PD6 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc3v0_sd_en>; + regulator-name = "vcc3v0_sd"; + regulator-boot-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + vin-supply = <&vcc3v3_sys>; + }; + + vcc3v3_sys: vcc3v3-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&dc_12v>; + }; + + vcca_0v9: vcca-0v9 { + compatible = "regulator-fixed"; + regulator-name = "vcca_0v9"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + vin-supply = <&vcc3v3_sys>; + }; + + /* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */ + vcc5v0_host: vcc5v0-host-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_host_en &hub_rst>; + regulator-name = "vcc5v0_host"; + vin-supply = <&vcc_sys>; + }; + + vcc_vbus_typec1: vcc-vbus-typec1 { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc_vbus_typec1_en>; + regulator-name = "vcc_vbus_typec1"; + regulator-always-on; + vin-supply = <&vcc_sys>; + }; + + vcc_sys: vcc-sys { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio2 RK_PA6 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc_sys_en>; + regulator-name = "vcc_sys"; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&dc_12v>; + }; + + vdd_log: vdd-log { + compatible = "pwm-regulator"; + pwms = <&pwm2 0 25000 1>; + regulator-name = "vdd_log"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <450000>; + regulator-max-microvolt = <1400000>; + pwm-supply = <&vcc3v3_sys>; + }; +}; + +&cpu_l0 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l1 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l2 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l3 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_b0 { + cpu-supply = <&vdd_cpu_b>; +}; + +&cpu_b1 { + cpu-supply = <&vdd_cpu_b>; +}; + +&emmc_phy { + status = "okay"; +}; + +&gmac { + assigned-clocks = <&cru SCLK_RMII_SRC>; + assigned-clock-parents = <&clkin_gmac>; + clock_in_out = "input"; + phy-supply = <&vcc_lan>; + phy-mode = "rgmii"; + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins>; + snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; + snps,reset-active-low; + snps,reset-delays-us = <0 10000 50000>; + tx_delay = <0x28>; + rx_delay = <0x11>; + status = "okay"; +}; + +&gpu { + mali-supply = <&vdd_gpu>; + status = "okay"; +}; + +&hdmi { + ddc-i2c-bus = <&i2c3>; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_cec>; + status = "okay"; +}; + +&hdmi_sound { + status = "okay"; +}; + +&i2c0 { + clock-frequency = <400000>; + i2c-scl-rising-time-ns = <168>; + i2c-scl-falling-time-ns = <4>; + status = "okay"; + + rk808: pmic@1b { + compatible = "rockchip,rk808"; + reg = <0x1b>; + interrupt-parent = <&gpio1>; + interrupts = <21 IRQ_TYPE_LEVEL_LOW>; + #clock-cells = <1>; + clock-output-names = "xin32k", "rk808-clkout2"; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int_l>; + rockchip,system-power-controller; + wakeup-source; + + vcc1-supply = <&vcc3v3_sys>; + vcc2-supply = <&vcc3v3_sys>; + vcc3-supply = <&vcc3v3_sys>; + vcc4-supply = <&vcc3v3_sys>; + vcc6-supply = <&vcc3v3_sys>; + vcc7-supply = <&vcc3v3_sys>; + vcc8-supply = <&vcc3v3_sys>; + vcc9-supply = <&vcc3v3_sys>; + vcc10-supply = <&vcc3v3_sys>; + vcc11-supply = <&vcc3v3_sys>; + vcc12-supply = <&vcc3v3_sys>; + vcc13-supply = <&vcc3v3_sys>; + vcc14-supply = <&vcc3v3_sys>; + vddio-supply = <&vcc_3v0>; + + regulators { + vdd_center: DCDC_REG1 { + regulator-name = "vdd_center"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_l: DCDC_REG2 { + regulator-name = "vdd_cpu_l"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_1v8: DCDC_REG4 { + regulator-name = "vcc_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcca1v8_codec: LDO_REG1 { + regulator-name = "vcca1v8_codec"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc1v8_hdmi: LDO_REG2 { + regulator-name = "vcc1v8_hdmi"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc1v8_pmu: LDO_REG3 { + regulator-name = "vcc1v8_pmu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc_sdio: LDO_REG4 { + regulator-name = "vcc_sdio"; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3000000>; + }; + }; + + vcca3v0_codec: LDO_REG5 { + regulator-name = "vcca3v0_codec"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v5: LDO_REG6 { + regulator-name = "vcc_1v5"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1500000>; + }; + }; + + vcca0v9_hdmi: LDO_REG7 { + regulator-name = "vcca0v9_hdmi"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v0: LDO_REG8 { + regulator-name = "vcc_3v0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3000000>; + }; + }; + + vcc3v3_s3: vcc_lan: SWITCH_REG1 { + regulator-name = "vcc3v3_s3"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v3_s0: SWITCH_REG2 { + regulator-name = "vcc3v3_s0"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; + + vdd_cpu_b: regulator@40 { + compatible = "silergy,syr827"; + reg = <0x40>; + fcs,suspend-voltage-selector = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&vsel1_gpio>; + regulator-name = "vdd_cpu_b"; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1500000>; + regulator-ramp-delay = <1000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc3v3_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_gpu: regulator@41 { + compatible = "silergy,syr828"; + reg = <0x41>; + fcs,suspend-voltage-selector = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&vsel2_gpio>; + regulator-name = "vdd_gpu"; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1500000>; + regulator-ramp-delay = <1000>; + vin-supply = <&vcc3v3_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; +}; + +&i2c1 { + i2c-scl-rising-time-ns = <300>; + i2c-scl-falling-time-ns = <15>; + status = "okay"; +}; + +&i2c3 { + i2c-scl-rising-time-ns = <450>; + i2c-scl-falling-time-ns = <15>; + status = "okay"; +}; + +&i2c4 { + i2c-scl-rising-time-ns = <600>; + i2c-scl-falling-time-ns = <20>; + status = "okay"; + + fusb1: usb-typec@22 { + compatible = "fcs,fusb302"; + reg = <0x22>; + interrupt-parent = <&gpio1>; + interrupts = <1 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&fusb1_int>; + vbus-supply = <&vcc_vbus_typec1>; + status = "okay"; + }; +}; + +&i2c7 { + i2c-scl-rising-time-ns = <600>; + i2c-scl-falling-time-ns = <20>; + status = "okay"; + + fusb0: usb-typec@22 { + compatible = "fcs,fusb302"; + reg = <0x22>; + interrupt-parent = <&gpio1>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&fusb0_int>; + vbus-supply = <&vcc_vbus_typec0>; + status = "okay"; + }; + + mp8859: regulator@66 { + compatible = "mps,mp8859"; + reg = <0x66>; + dc_12v: mp8859_dcdc { + regulator-name = "dc_12v"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc_vbus_typec0>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <12000000>; + }; + }; + }; +}; + +&i2s0 { + rockchip,playback-channels = <8>; + rockchip,capture-channels = <8>; + status = "okay"; +}; + +&i2s1 { + rockchip,playback-channels = <2>; + rockchip,capture-channels = <2>; + status = "okay"; +}; + +&i2s2 { + status = "okay"; +}; + +&io_domains { + audio-supply = <&vcca1v8_codec>; + bt656-supply = <&vcc_3v0>; + gpio1830-supply = <&vcc_3v0>; + sdmmc-supply = <&vcc_sdio>; + status = "okay"; +}; + +&pmu_io_domains { + pmu1830-supply = <&vcc_3v0>; + status = "okay"; +}; + +&pinctrl { + buttons { + pwr_key_l: pwr-key-l { + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + lcd-panel { + lcd_panel_reset: lcd-panel-reset { + rockchip,pins = <4 RK_PD5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + leds { + diy_led_gpio: diy_led-gpio { + rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + work_led_gpio: work_led-gpio { + rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + yellow_led_gpio: yellow_led-gpio { + rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pmic { + vsel1_gpio: vsel1-gpio { + rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>; + }; + + vsel2_gpio: vsel2-gpio { + rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; + + sdio-pwrseq { + wifi_enable_h: wifi-enable-h { + rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + sdmmc { + vcc3v0_sd_en: vcc3v0-sd-en { + rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pmic { + pmic_int_l: pmic-int-l { + rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + usb2 { + vcc5v0_host_en: vcc5v0-host-en { + rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + vcc_sys_en: vcc-sys-en { + rockchip,pins = <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + hub_rst: hub-rst { + rockchip,pins = <2 RK_PA4 RK_FUNC_GPIO &pcfg_output_high>; + }; + }; + + usb-typec { + vcc_vbus_typec1_en: vcc-vbus-typec1-en { + rockchip,pins = <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + fusb30x { + fusb0_int: fusb0-int { + rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + fusb1_int: fusb1-int { + rockchip,pins = <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; +}; + +&pwm0 { + status = "okay"; +}; + +&pwm2 { + status = "okay"; +}; + +&saradc { + vref-supply = <&vcca1v8_s3>; + status = "okay"; +}; + +&sdmmc { + bus-width = <4>; + cap-sd-highspeed; + cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>; + disable-wp; + max-frequency = <150000000>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>; + sd-uhs-sdr104; + vmmc-supply = <&vcc3v0_sd>; + vqmmc-supply = <&vcc_sdio>; + status = "okay"; +}; + +&sdhci { + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&spi1 { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + }; +}; + +&tcphy0 { + status = "okay"; +}; + +&tcphy1 { + status = "okay"; +}; + +&tsadc { + /* tshut mode 0:CRU 1:GPIO */ + rockchip,hw-tshut-mode = <1>; + /* tshut polarity 0:LOW 1:HIGH */ + rockchip,hw-tshut-polarity = <1>; + status = "okay"; +}; + +&u2phy0 { + status = "okay"; + + u2phy0_otg: otg-port { + phy-supply = <&vcc_vbus_typec0>; + status = "okay"; + }; + + u2phy0_host: host-port { + phy-supply = <&vcc5v0_host>; + status = "okay"; + }; +}; + +&u2phy1 { + status = "okay"; + + u2phy1_otg: otg-port { + phy-supply = <&vcc_vbus_typec1>; + status = "okay"; + }; + + u2phy1_host: host-port { + phy-supply = <&vcc5v0_host>; + status = "okay"; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_xfer &uart0_cts>; + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +}; + +&usbdrd3_0 { + status = "okay"; +}; + +&usbdrd_dwc3_0 { + status = "okay"; +}; + +&usbdrd3_1 { + status = "okay"; +}; + +&usbdrd_dwc3_1 { + status = "okay"; + dr_mode = "host"; +}; + +&vopb { + status = "okay"; +}; + +&vopb_mmu { + status = "okay"; +}; + +&vopl { + status = "okay"; +}; + +&vopl_mmu { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dts b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dts index 1ae1ebd4efdd..3923ec01ef66 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dts @@ -53,6 +53,16 @@ vin-supply = <&vcc12v_dcin>; }; + vcc_0v9: vcc-0v9 { + compatible = "regulator-fixed"; + regulator-name = "vcc_0v9"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + vin-supply = <&vcc3v3_sys>; + }; + vcc3v3_pcie: vcc3v3-pcie-regulator { compatible = "regulator-fixed"; enable-active-high; @@ -463,6 +473,22 @@ pmu1830-supply = <&vcc_3v0>; }; +&pcie_phy { + status = "okay"; +}; + +&pcie0 { + ep-gpios = <&gpio4 RK_PD3 GPIO_ACTIVE_HIGH>; + max-link-speed = <2>; + num-lanes = <4>; + pinctrl-0 = <&pcie_clkreqnb_cpm>; + pinctrl-names = "default"; + vpcie0v9-supply = <&vcc_0v9>; + vpcie1v8-supply = <&vcc_1v8>; + vpcie3v3-supply = <&vcc3v3_pcie>; + status = "okay"; +}; + &pinctrl { bt { bt_enable_h: bt-enable-h { @@ -486,21 +512,18 @@ sdio0 { sdio0_bus4: sdio0-bus4 { - rockchip,pins = - <2 20 RK_FUNC_1 &pcfg_pull_up_20ma>, - <2 21 RK_FUNC_1 &pcfg_pull_up_20ma>, - <2 22 RK_FUNC_1 &pcfg_pull_up_20ma>, - <2 23 RK_FUNC_1 &pcfg_pull_up_20ma>; + rockchip,pins = <2 RK_PC4 1 &pcfg_pull_up_20ma>, + <2 RK_PC5 1 &pcfg_pull_up_20ma>, + <2 RK_PC6 1 &pcfg_pull_up_20ma>, + <2 RK_PC7 1 &pcfg_pull_up_20ma>; }; sdio0_cmd: sdio0-cmd { - rockchip,pins = - <2 24 RK_FUNC_1 &pcfg_pull_up_20ma>; + rockchip,pins = <2 RK_PD0 1 &pcfg_pull_up_20ma>; }; sdio0_clk: sdio0-clk { - rockchip,pins = - <2 25 RK_FUNC_1 &pcfg_pull_none_20ma>; + rockchip,pins = <2 RK_PD1 1 &pcfg_pull_none_20ma>; }; }; @@ -532,8 +555,7 @@ wifi { wifi_enable_h: wifi-enable-h { - rockchip,pins = - <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; }; wifi_host_wake_l: wifi-host-wake-l { diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi index c7d48d41e184..b69f0f2cbd67 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi @@ -76,6 +76,15 @@ regulator-always-on; vin-supply = <&vcc5v0_sys>; }; + + vcc_0v9: vcc-0v9 { + compatible = "regulator-fixed"; + regulator-name = "vcc_0v9"; + regulator-always-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + vin-supply = <&vcc3v3_sys>; + }; }; &cpu_l0 { @@ -384,6 +393,8 @@ num-lanes = <4>; pinctrl-names = "default"; pinctrl-0 = <&pcie_clkreqn_cpm>; + vpcie0v9-supply = <&vcc_0v9>; + vpcie1v8-supply = <&vcca_1v8>; vpcie3v3-supply = <&vcc3v3_pcie>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64-v2.dts b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64-v2.dts new file mode 100644 index 000000000000..304e3c51391c --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64-v2.dts @@ -0,0 +1,30 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd. + * Copyright (c) 2018 Akash Gajjar <Akash_Gajjar@mentor.com> + * Copyright (c) 2019 Katsuhiro Suzuki <katsuhiro@katsuster.net> + */ + +/dts-v1/; +#include "rk3399-rockpro64.dtsi" + +/ { + model = "Pine64 RockPro64 v2.0"; + compatible = "pine64,rockpro64-v2.0", "pine64,rockpro64", "rockchip,rk3399"; +}; + +&i2c1 { + es8316: codec@10 { + compatible = "everest,es8316"; + reg = <0x10>; + clocks = <&cru SCLK_I2S_8CH_OUT>; + clock-names = "mclk"; + #sound-dai-cells = <0>; + + port { + es8316_p0_0: endpoint { + remote-endpoint = <&i2s1_p0_0>; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts index eb5594062006..4b42717800f7 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts @@ -2,733 +2,29 @@ /* * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd. * Copyright (c) 2018 Akash Gajjar <Akash_Gajjar@mentor.com> + * Copyright (c) 2019 Katsuhiro Suzuki <katsuhiro@katsuster.net> */ /dts-v1/; -#include <dt-bindings/input/linux-event-codes.h> -#include <dt-bindings/pwm/pwm.h> -#include "rk3399.dtsi" -#include "rk3399-opp.dtsi" +#include "rk3399-rockpro64.dtsi" / { - model = "Pine64 RockPro64"; - compatible = "pine64,rockpro64", "rockchip,rk3399"; - - chosen { - stdout-path = "serial2:1500000n8"; - }; - - clkin_gmac: external-gmac-clock { - compatible = "fixed-clock"; - clock-frequency = <125000000>; - clock-output-names = "clkin_gmac"; - #clock-cells = <0>; - }; - - gpio-keys { - compatible = "gpio-keys"; - autorepeat; - pinctrl-names = "default"; - pinctrl-0 = <&pwrbtn>; - - power { - debounce-interval = <100>; - gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; - label = "GPIO Key Power"; - linux,code = <KEY_POWER>; - wakeup-source; - }; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&work_led_gpio>, <&diy_led_gpio>; - - work-led { - label = "work"; - default-state = "on"; - gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>; - }; - - diy-led { - label = "diy"; - default-state = "off"; - gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>; - }; - }; - - sdio_pwrseq: sdio-pwrseq { - compatible = "mmc-pwrseq-simple"; - clocks = <&rk808 1>; - clock-names = "ext_clock"; - pinctrl-names = "default"; - pinctrl-0 = <&wifi_enable_h>; - - /* - * On the module itself this is one of these (depending - * on the actual card populated): - * - SDIO_RESET_L_WL_REG_ON - * - PDN (power down when low) - */ - reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; - }; - - vcc12v_dcin: vcc12v-dcin { - compatible = "regulator-fixed"; - regulator-name = "vcc12v_dcin"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - }; - - /* switched by pmic_sleep */ - vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 { - compatible = "regulator-fixed"; - regulator-name = "vcc1v8_s3"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vcc_1v8>; - }; - - vcc3v3_pcie: vcc3v3-pcie-regulator { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio1 RK_PD0 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&pcie_pwr_en>; - regulator-name = "vcc3v3_pcie"; - regulator-always-on; - regulator-boot-on; - vin-supply = <&vcc12v_dcin>; - }; - - vcc3v3_sys: vcc3v3-sys { - compatible = "regulator-fixed"; - regulator-name = "vcc3v3_sys"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vcc5v0_sys>; - }; - - /* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */ - vcc5v0_host: vcc5v0-host-regulator { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&vcc5v0_host_en>; - regulator-name = "vcc5v0_host"; - regulator-always-on; - vin-supply = <&vcc5v0_usb>; - }; - - vcc5v0_typec: vcc5v0-typec-regulator { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&vcc5v0_typec_en>; - regulator-name = "vcc5v0_typec"; - regulator-always-on; - vin-supply = <&vcc5v0_usb>; - }; - - vcc5v0_sys: vcc5v0-sys { - compatible = "regulator-fixed"; - regulator-name = "vcc5v0_sys"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&vcc12v_dcin>; - }; - - vcc5v0_usb: vcc5v0-usb { - compatible = "regulator-fixed"; - regulator-name = "vcc5v0_usb"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&vcc12v_dcin>; - }; - - vdd_log: vdd-log { - compatible = "pwm-regulator"; - pwms = <&pwm2 0 25000 1>; - regulator-name = "vdd_log"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1400000>; - vin-supply = <&vcc5v0_sys>; - }; -}; - -&cpu_l0 { - cpu-supply = <&vdd_cpu_l>; -}; - -&cpu_l1 { - cpu-supply = <&vdd_cpu_l>; -}; - -&cpu_l2 { - cpu-supply = <&vdd_cpu_l>; -}; - -&cpu_l3 { - cpu-supply = <&vdd_cpu_l>; -}; - -&cpu_b0 { - cpu-supply = <&vdd_cpu_b>; -}; - -&cpu_b1 { - cpu-supply = <&vdd_cpu_b>; -}; - -&emmc_phy { - status = "okay"; -}; - -&gmac { - assigned-clocks = <&cru SCLK_RMII_SRC>; - assigned-clock-parents = <&clkin_gmac>; - clock_in_out = "input"; - phy-supply = <&vcc_lan>; - phy-mode = "rgmii"; - pinctrl-names = "default"; - pinctrl-0 = <&rgmii_pins>; - snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; - snps,reset-active-low; - snps,reset-delays-us = <0 10000 50000>; - tx_delay = <0x28>; - rx_delay = <0x11>; - status = "okay"; -}; - -&hdmi { - ddc-i2c-bus = <&i2c3>; - pinctrl-names = "default"; - pinctrl-0 = <&hdmi_cec>; - status = "okay"; -}; - -&hdmi_sound { - status = "okay"; -}; - -&gpu { - mali-supply = <&vdd_gpu>; - status = "okay"; -}; - -&i2c0 { - clock-frequency = <400000>; - i2c-scl-rising-time-ns = <168>; - i2c-scl-falling-time-ns = <4>; - status = "okay"; - - rk808: pmic@1b { - compatible = "rockchip,rk808"; - reg = <0x1b>; - interrupt-parent = <&gpio1>; - interrupts = <21 IRQ_TYPE_LEVEL_LOW>; - #clock-cells = <1>; - clock-output-names = "xin32k", "rk808-clkout2"; - pinctrl-names = "default"; - pinctrl-0 = <&pmic_int_l>; - rockchip,system-power-controller; - wakeup-source; - - vcc1-supply = <&vcc5v0_sys>; - vcc2-supply = <&vcc5v0_sys>; - vcc3-supply = <&vcc5v0_sys>; - vcc4-supply = <&vcc5v0_sys>; - vcc6-supply = <&vcc5v0_sys>; - vcc7-supply = <&vcc5v0_sys>; - vcc8-supply = <&vcc3v3_sys>; - vcc9-supply = <&vcc5v0_sys>; - vcc10-supply = <&vcc5v0_sys>; - vcc11-supply = <&vcc5v0_sys>; - vcc12-supply = <&vcc3v3_sys>; - vddio-supply = <&vcca_1v8>; - - regulators { - vdd_center: DCDC_REG1 { - regulator-name = "vdd_center"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <1350000>; - regulator-ramp-delay = <6001>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdd_cpu_l: DCDC_REG2 { - regulator-name = "vdd_cpu_l"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <1350000>; - regulator-ramp-delay = <6001>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_ddr: DCDC_REG3 { - regulator-name = "vcc_ddr"; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - vcc_1v8: DCDC_REG4 { - regulator-name = "vcc_1v8"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vcc1v8_dvp: LDO_REG1 { - regulator-name = "vcc1v8_dvp"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc3v0_touch: LDO_REG2 { - regulator-name = "vcc3v0_touch"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcca_1v8: LDO_REG3 { - regulator-name = "vcca_1v8"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vcc_sdio: LDO_REG4 { - regulator-name = "vcc_sdio"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3000000>; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3000000>; - }; - }; - - vcca3v0_codec: LDO_REG5 { - regulator-name = "vcca3v0_codec"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_1v5: LDO_REG6 { - regulator-name = "vcc_1v5"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1500000>; - }; - }; - - vcca1v8_codec: LDO_REG7 { - regulator-name = "vcca1v8_codec"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_3v0: LDO_REG8 { - regulator-name = "vcc_3v0"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3000000>; - }; - }; - - vcc3v3_s3: vcc_lan: SWITCH_REG1 { - regulator-name = "vcc3v3_s3"; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc3v3_s0: SWITCH_REG2 { - regulator-name = "vcc3v3_s0"; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - }; - }; - - vdd_cpu_b: regulator@40 { - compatible = "silergy,syr827"; - reg = <0x40>; - fcs,suspend-voltage-selector = <1>; - pinctrl-names = "default"; - pinctrl-0 = <&vsel1_gpio>; - regulator-name = "vdd_cpu_b"; - regulator-min-microvolt = <712500>; - regulator-max-microvolt = <1500000>; - regulator-ramp-delay = <1000>; - regulator-always-on; - regulator-boot-on; - vin-supply = <&vcc5v0_sys>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdd_gpu: regulator@41 { - compatible = "silergy,syr828"; - reg = <0x41>; - fcs,suspend-voltage-selector = <1>; - pinctrl-names = "default"; - pinctrl-0 = <&vsel2_gpio>; - regulator-name = "vdd_gpu"; - regulator-min-microvolt = <712500>; - regulator-max-microvolt = <1500000>; - regulator-ramp-delay = <1000>; - regulator-always-on; - regulator-boot-on; - vin-supply = <&vcc5v0_sys>; - - regulator-state-mem { - regulator-off-in-suspend; - }; - }; + model = "Pine64 RockPro64 v2.1"; + compatible = "pine64,rockpro64-v2.1", "pine64,rockpro64", "rockchip,rk3399"; }; &i2c1 { - i2c-scl-rising-time-ns = <300>; - i2c-scl-falling-time-ns = <15>; - status = "okay"; -}; - -&i2c3 { - i2c-scl-rising-time-ns = <450>; - i2c-scl-falling-time-ns = <15>; - status = "okay"; -}; - -&i2c4 { - i2c-scl-rising-time-ns = <600>; - i2c-scl-falling-time-ns = <20>; - status = "okay"; + es8316: codec@11 { + compatible = "everest,es8316"; + reg = <0x11>; + clocks = <&cru SCLK_I2S_8CH_OUT>; + clock-names = "mclk"; + #sound-dai-cells = <0>; - fusb0: typec-portc@22 { - compatible = "fcs,fusb302"; - reg = <0x22>; - interrupt-parent = <&gpio1>; - interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&fusb0_int>; - vbus-supply = <&vcc5v0_typec>; - status = "okay"; - }; -}; - -&i2s0 { - rockchip,playback-channels = <8>; - rockchip,capture-channels = <8>; - status = "okay"; -}; - -&i2s1 { - rockchip,playback-channels = <2>; - rockchip,capture-channels = <2>; - status = "okay"; -}; - -&i2s2 { - status = "okay"; -}; - -&io_domains { - status = "okay"; - - bt656-supply = <&vcc1v8_dvp>; - audio-supply = <&vcc_3v0>; - sdmmc-supply = <&vcc_sdio>; - gpio1830-supply = <&vcc_3v0>; -}; - -&pcie0 { - ep-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>; - num-lanes = <4>; - pinctrl-names = "default"; - pinctrl-0 = <&pcie_perst>; - vpcie12v-supply = <&vcc12v_dcin>; - vpcie3v3-supply = <&vcc3v3_pcie>; - status = "okay"; -}; - -&pcie_phy { - status = "okay"; -}; - -&pmu_io_domains { - pmu1830-supply = <&vcc_3v0>; - status = "okay"; -}; - -&pinctrl { - buttons { - pwrbtn: pwrbtn { - rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - - fusb302x { - fusb0_int: fusb0-int { - rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - - leds { - work_led_gpio: work_led-gpio { - rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - diy_led_gpio: diy_led-gpio { - rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - pcie { - pcie_perst: pcie-perst { - rockchip,pins = <2 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - pcie_pwr_en: pcie-pwr-en { - rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - pmic { - pmic_int_l: pmic-int-l { - rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; - }; - - vsel1_gpio: vsel1-gpio { - rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>; - }; - - vsel2_gpio: vsel2-gpio { - rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; - }; - }; - - sdio-pwrseq { - wifi_enable_h: wifi-enable-h { - rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - usb-typec { - vcc5v0_typec_en: vcc5v0_typec_en { - rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - - usb2 { - vcc5v0_host_en: vcc5v0-host-en { - rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; + port { + es8316_p0_0: endpoint { + remote-endpoint = <&i2s1_p0_0>; + }; }; }; }; - -&pwm0 { - status = "okay"; -}; - -&pwm2 { - status = "okay"; -}; - -&saradc { - vref-supply = <&vcca1v8_s3>; - status = "okay"; -}; - -&sdmmc { - bus-width = <4>; - cap-mmc-highspeed; - cap-sd-highspeed; - cd-gpios = <&gpio0 7 GPIO_ACTIVE_LOW>; - disable-wp; - max-frequency = <150000000>; - pinctrl-names = "default"; - pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>; - status = "okay"; -}; - -&sdhci { - bus-width = <8>; - mmc-hs400-1_8v; - mmc-hs400-enhanced-strobe; - non-removable; - status = "okay"; -}; - -&tcphy0 { - status = "okay"; -}; - -&tcphy1 { - status = "okay"; -}; - -&tsadc { - /* tshut mode 0:CRU 1:GPIO */ - rockchip,hw-tshut-mode = <1>; - /* tshut polarity 0:LOW 1:HIGH */ - rockchip,hw-tshut-polarity = <1>; - status = "okay"; -}; - -&u2phy0 { - status = "okay"; - - u2phy0_otg: otg-port { - status = "okay"; - }; - - u2phy0_host: host-port { - phy-supply = <&vcc5v0_host>; - status = "okay"; - }; -}; - -&u2phy1 { - status = "okay"; - - u2phy1_otg: otg-port { - status = "okay"; - }; - - u2phy1_host: host-port { - phy-supply = <&vcc5v0_host>; - status = "okay"; - }; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_xfer &uart0_cts>; - status = "okay"; -}; - -&uart2 { - status = "okay"; -}; - -&usb_host0_ehci { - status = "okay"; -}; - -&usb_host0_ohci { - status = "okay"; -}; - -&usb_host1_ehci { - status = "okay"; -}; - -&usb_host1_ohci { - status = "okay"; -}; - -&usbdrd3_0 { - status = "okay"; -}; - -&usbdrd_dwc3_0 { - status = "okay"; - dr_mode = "otg"; -}; - -&usbdrd3_1 { - status = "okay"; -}; - -&usbdrd_dwc3_1 { - status = "okay"; - dr_mode = "host"; -}; - -&vopb { - status = "okay"; -}; - -&vopb_mmu { - status = "okay"; -}; - -&vopl { - status = "okay"; -}; - -&vopl_mmu { - status = "okay"; -}; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi new file mode 100644 index 000000000000..9bca25801260 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi @@ -0,0 +1,797 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd. + * Copyright (c) 2018 Akash Gajjar <Akash_Gajjar@mentor.com> + */ + +#include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/pwm/pwm.h> +#include "rk3399.dtsi" +#include "rk3399-opp.dtsi" + +/ { + chosen { + stdout-path = "serial2:1500000n8"; + }; + + clkin_gmac: external-gmac-clock { + compatible = "fixed-clock"; + clock-frequency = <125000000>; + clock-output-names = "clkin_gmac"; + #clock-cells = <0>; + }; + + gpio-keys { + compatible = "gpio-keys"; + autorepeat; + pinctrl-names = "default"; + pinctrl-0 = <&pwrbtn>; + + power { + debounce-interval = <100>; + gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; + label = "GPIO Key Power"; + linux,code = <KEY_POWER>; + wakeup-source; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&work_led_gpio>, <&diy_led_gpio>; + + work-led { + label = "work"; + default-state = "on"; + gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>; + }; + + diy-led { + label = "diy"; + default-state = "off"; + gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>; + }; + }; + + fan: pwm-fan { + compatible = "pwm-fan"; + #cooling-cells = <2>; + fan-supply = <&vcc12v_dcin>; + pwms = <&pwm1 0 50000 0>; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&rk808 1>; + clock-names = "ext_clock"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_enable_h>; + reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; + }; + + sound { + compatible = "audio-graph-card"; + label = "rockchip,rk3399"; + dais = <&i2s1_p0>; + }; + + vcc12v_dcin: vcc12v-dcin { + compatible = "regulator-fixed"; + regulator-name = "vcc12v_dcin"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + }; + + /* switched by pmic_sleep */ + vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 { + compatible = "regulator-fixed"; + regulator-name = "vcc1v8_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_1v8>; + }; + + vcc3v3_pcie: vcc3v3-pcie-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio1 RK_PD0 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie_pwr_en>; + regulator-name = "vcc3v3_pcie"; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc12v_dcin>; + }; + + vcc3v3_sys: vcc3v3-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc5v0_sys>; + }; + + /* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */ + vcc5v0_host: vcc5v0-host-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_host_en>; + regulator-name = "vcc5v0_host"; + regulator-always-on; + vin-supply = <&vcc5v0_usb>; + }; + + vcc5v0_typec: vcc5v0-typec-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_typec_en>; + regulator-name = "vcc5v0_typec"; + regulator-always-on; + vin-supply = <&vcc5v0_usb>; + }; + + vcc5v0_sys: vcc5v0-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc12v_dcin>; + }; + + vcc5v0_usb: vcc5v0-usb { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_usb"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc12v_dcin>; + }; + + vdd_log: vdd-log { + compatible = "pwm-regulator"; + pwms = <&pwm2 0 25000 1>; + regulator-name = "vdd_log"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1700000>; + vin-supply = <&vcc5v0_sys>; + }; +}; + +&cpu_l0 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l1 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l2 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l3 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_b0 { + cpu-supply = <&vdd_cpu_b>; +}; + +&cpu_b1 { + cpu-supply = <&vdd_cpu_b>; +}; + +&emmc_phy { + status = "okay"; +}; + +&gmac { + assigned-clocks = <&cru SCLK_RMII_SRC>; + assigned-clock-parents = <&clkin_gmac>; + clock_in_out = "input"; + phy-supply = <&vcc_lan>; + phy-mode = "rgmii"; + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins>; + snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; + snps,reset-active-low; + snps,reset-delays-us = <0 10000 50000>; + tx_delay = <0x28>; + rx_delay = <0x11>; + status = "okay"; +}; + +&hdmi { + ddc-i2c-bus = <&i2c3>; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_cec>; + status = "okay"; +}; + +&hdmi_sound { + status = "okay"; +}; + +&gpu { + mali-supply = <&vdd_gpu>; + status = "okay"; +}; + +&i2c0 { + clock-frequency = <400000>; + i2c-scl-rising-time-ns = <168>; + i2c-scl-falling-time-ns = <4>; + status = "okay"; + + rk808: pmic@1b { + compatible = "rockchip,rk808"; + reg = <0x1b>; + interrupt-parent = <&gpio3>; + interrupts = <10 IRQ_TYPE_LEVEL_LOW>; + #clock-cells = <1>; + clock-output-names = "xin32k", "rk808-clkout2"; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int_l>; + rockchip,system-power-controller; + wakeup-source; + + vcc1-supply = <&vcc5v0_sys>; + vcc2-supply = <&vcc5v0_sys>; + vcc3-supply = <&vcc5v0_sys>; + vcc4-supply = <&vcc5v0_sys>; + vcc6-supply = <&vcc5v0_sys>; + vcc7-supply = <&vcc5v0_sys>; + vcc8-supply = <&vcc3v3_sys>; + vcc9-supply = <&vcc5v0_sys>; + vcc10-supply = <&vcc5v0_sys>; + vcc11-supply = <&vcc5v0_sys>; + vcc12-supply = <&vcc3v3_sys>; + vddio-supply = <&vcca_1v8>; + + regulators { + vdd_center: DCDC_REG1 { + regulator-name = "vdd_center"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_l: DCDC_REG2 { + regulator-name = "vdd_cpu_l"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_1v8: DCDC_REG4 { + regulator-name = "vcc_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc1v8_dvp: LDO_REG1 { + regulator-name = "vcc1v8_dvp"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v0_touch: LDO_REG2 { + regulator-name = "vcc3v0_touch"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcca_1v8: LDO_REG3 { + regulator-name = "vcca_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc_sdio: LDO_REG4 { + regulator-name = "vcc_sdio"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3000000>; + }; + }; + + vcca3v0_codec: LDO_REG5 { + regulator-name = "vcca3v0_codec"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v5: LDO_REG6 { + regulator-name = "vcc_1v5"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1500000>; + }; + }; + + vcca1v8_codec: LDO_REG7 { + regulator-name = "vcca1v8_codec"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v0: LDO_REG8 { + regulator-name = "vcc_3v0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3000000>; + }; + }; + + vcc3v3_s3: vcc_lan: SWITCH_REG1 { + regulator-name = "vcc3v3_s3"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v3_s0: SWITCH_REG2 { + regulator-name = "vcc3v3_s0"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; + + vdd_cpu_b: regulator@40 { + compatible = "silergy,syr827"; + reg = <0x40>; + fcs,suspend-voltage-selector = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&vsel1_gpio>; + regulator-name = "vdd_cpu_b"; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1500000>; + regulator-ramp-delay = <1000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_gpu: regulator@41 { + compatible = "silergy,syr828"; + reg = <0x41>; + fcs,suspend-voltage-selector = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&vsel2_gpio>; + regulator-name = "vdd_gpu"; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1500000>; + regulator-ramp-delay = <1000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; +}; + +&i2c1 { + i2c-scl-rising-time-ns = <300>; + i2c-scl-falling-time-ns = <15>; + status = "okay"; +}; + +&i2c3 { + i2c-scl-rising-time-ns = <450>; + i2c-scl-falling-time-ns = <15>; + status = "okay"; +}; + +&i2c4 { + i2c-scl-rising-time-ns = <600>; + i2c-scl-falling-time-ns = <20>; + status = "okay"; + + fusb0: typec-portc@22 { + compatible = "fcs,fusb302"; + reg = <0x22>; + interrupt-parent = <&gpio1>; + interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&fusb0_int>; + vbus-supply = <&vcc5v0_typec>; + status = "okay"; + }; +}; + +&i2s0 { + rockchip,playback-channels = <8>; + rockchip,capture-channels = <8>; + status = "okay"; +}; + +&i2s1 { + rockchip,playback-channels = <2>; + rockchip,capture-channels = <2>; + status = "okay"; + + i2s1_p0: port { + i2s1_p0_0: endpoint { + dai-format = "i2s"; + mclk-fs = <256>; + remote-endpoint = <&es8316_p0_0>; + }; + }; +}; + +&i2s2 { + status = "okay"; +}; + +&io_domains { + status = "okay"; + + bt656-supply = <&vcc1v8_dvp>; + audio-supply = <&vcc_3v0>; + sdmmc-supply = <&vcc_sdio>; + gpio1830-supply = <&vcc_3v0>; +}; + +&pcie0 { + ep-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>; + num-lanes = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie_perst>; + vpcie12v-supply = <&vcc12v_dcin>; + vpcie3v3-supply = <&vcc3v3_pcie>; + status = "okay"; +}; + +&pcie_phy { + status = "okay"; +}; + +&pmu_io_domains { + pmu1830-supply = <&vcc_3v0>; + status = "okay"; +}; + +&pinctrl { + bt { + bt_enable_h: bt-enable-h { + rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_host_wake_l: bt-host-wake-l { + rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_down>; + }; + + bt_wake_l: bt-wake-l { + rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + buttons { + pwrbtn: pwrbtn { + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + fusb302x { + fusb0_int: fusb0-int { + rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + leds { + work_led_gpio: work_led-gpio { + rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + diy_led_gpio: diy_led-gpio { + rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pcie { + pcie_perst: pcie-perst { + rockchip,pins = <2 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + pcie_pwr_en: pcie-pwr-en { + rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pmic { + pmic_int_l: pmic-int-l { + rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + vsel1_gpio: vsel1-gpio { + rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>; + }; + + vsel2_gpio: vsel2-gpio { + rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; + + sdio-pwrseq { + wifi_enable_h: wifi-enable-h { + rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + usb-typec { + vcc5v0_typec_en: vcc5v0_typec_en { + rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + usb2 { + vcc5v0_host_en: vcc5v0-host-en { + rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&pwm0 { + status = "okay"; +}; + +&pwm1 { + status = "okay"; +}; + +&pwm2 { + status = "okay"; +}; + +&saradc { + vref-supply = <&vcca1v8_s3>; + status = "okay"; +}; + +&sdio0 { + bus-width = <4>; + cap-sd-highspeed; + cap-sdio-irq; + disable-wp; + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>; + sd-uhs-sdr104; + status = "okay"; +}; + +&sdmmc { + bus-width = <4>; + cap-sd-highspeed; + cd-gpios = <&gpio0 7 GPIO_ACTIVE_LOW>; + disable-wp; + max-frequency = <150000000>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>; + status = "okay"; +}; + +&sdhci { + bus-width = <8>; + mmc-hs200-1_8v; + non-removable; + status = "okay"; +}; + +&spi1 { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + }; +}; + +&tcphy0 { + status = "okay"; +}; + +&tcphy1 { + status = "okay"; +}; + +&tsadc { + /* tshut mode 0:CRU 1:GPIO */ + rockchip,hw-tshut-mode = <1>; + /* tshut polarity 0:LOW 1:HIGH */ + rockchip,hw-tshut-polarity = <1>; + status = "okay"; +}; + +&u2phy0 { + status = "okay"; + + u2phy0_otg: otg-port { + status = "okay"; + }; + + u2phy0_host: host-port { + phy-supply = <&vcc5v0_host>; + status = "okay"; + }; +}; + +&u2phy1 { + status = "okay"; + + u2phy1_otg: otg-port { + status = "okay"; + }; + + u2phy1_host: host-port { + phy-supply = <&vcc5v0_host>; + status = "okay"; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + clocks = <&rk808 1>; + clock-names = "lpo"; + device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>; + host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>; + vbat-supply = <&vcc3v3_sys>; + vddio-supply = <&vcc_1v8>; + }; +}; + +&uart2 { + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +}; + +&usbdrd3_0 { + status = "okay"; +}; + +&usbdrd_dwc3_0 { + status = "okay"; + dr_mode = "otg"; +}; + +&usbdrd3_1 { + status = "okay"; +}; + +&usbdrd_dwc3_1 { + status = "okay"; + dr_mode = "host"; +}; + +&vopb { + status = "okay"; +}; + +&vopb_mmu { + status = "okay"; +}; + +&vopl { + status = "okay"; +}; + +&vopl_mmu { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts b/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts index 808ea77f951d..b4d8f60b7e44 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts @@ -84,7 +84,7 @@ }; edp_panel: edp-panel { - compatible ="lg,lp079qx1-sp0v", "simple-panel"; + compatible ="lg,lp079qx1-sp0v"; backlight = <&backlight>; enable-gpios = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi index cede1ad81be2..33cc21fcf4c1 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi @@ -291,7 +291,7 @@ status = "disabled"; }; - sdio0: dwmmc@fe310000 { + sdio0: mmc@fe310000 { compatible = "rockchip,rk3399-dw-mshc", "rockchip,rk3288-dw-mshc"; reg = <0x0 0xfe310000 0x0 0x4000>; @@ -307,7 +307,7 @@ status = "disabled"; }; - sdmmc: dwmmc@fe320000 { + sdmmc: mmc@fe320000 { compatible = "rockchip,rk3399-dw-mshc", "rockchip,rk3288-dw-mshc"; reg = <0x0 0xfe320000 0x0 0x4000>; @@ -520,6 +520,7 @@ its: interrupt-controller@fee20000 { compatible = "arm,gic-v3-its"; msi-controller; + #msi-cells = <1>; reg = <0x0 0xfee20000 0x0 0x20000>; }; @@ -827,6 +828,14 @@ type = "critical"; }; }; + + cooling-maps { + map0 { + trip = <&gpu_alert0>; + cooling-device = + <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; }; }; @@ -1886,6 +1895,7 @@ <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH 0>; interrupt-names = "gpu", "job", "mmu"; clocks = <&cru ACLK_GPU>; + #cooling-cells = <2>; power-domains = <&power RK3399_PD_GPU>; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399pro-rock-pi-n10.dts b/arch/arm64/boot/dts/rockchip/rk3399pro-rock-pi-n10.dts new file mode 100644 index 000000000000..b42f94179538 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3399pro-rock-pi-n10.dts @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd + * Copyright (c) 2019 Radxa Limited + * Copyright (c) 2019 Amarula Solutions(India) + */ + +/dts-v1/; +#include "rk3399.dtsi" +#include "rk3399-opp.dtsi" +#include "rk3399pro-vmarc-som.dtsi" +#include <arm/rockchip-radxa-dalang-carrier.dtsi> + +/ { + model = "Radxa ROCK Pi N10"; + compatible = "radxa,rockpi-n10", "rockchip,rk3399pro"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi b/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi new file mode 100644 index 000000000000..0a516334f15f --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi @@ -0,0 +1,333 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd + * Copyright (c) 2019 Vamrs Limited + * Copyright (c) 2019 Amarula Solutions(India) + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include <dt-bindings/pwm/pwm.h> + +/ { + compatible = "vamrs,rk3399pro-vmarc-som", "rockchip,rk3399pro"; + + clkin_gmac: external-gmac-clock { + compatible = "fixed-clock"; + clock-frequency = <125000000>; + clock-output-names = "clkin_gmac"; + #clock-cells = <0>; + }; + + vcc12v_dcin: vcc12v-dcin-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc12v_dcin"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + }; + + vcc5v0_sys: vcc5v0-sys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc12v_dcin>; + }; +}; + +&cpu_l0 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l1 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l2 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l3 { + cpu-supply = <&vdd_cpu_l>; +}; + +&emmc_phy { + status = "okay"; +}; + +&gmac { + assigned-clocks = <&cru SCLK_RMII_SRC>; + assigned-clock-parents = <&clkin_gmac>; + clock_in_out = "input"; + phy-supply = <&vcc_lan>; + phy-mode = "rgmii"; + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins>; + snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; + snps,reset-active-low; + snps,reset-delays-us = <0 10000 50000>; + tx_delay = <0x28>; + rx_delay = <0x11>; +}; + +&i2c0 { + clock-frequency = <400000>; + i2c-scl-rising-time-ns = <180>; + i2c-scl-falling-time-ns = <30>; + status = "okay"; + + rk809: pmic@20 { + compatible = "rockchip,rk809"; + reg = <0x20>; + interrupt-parent = <&gpio1>; + interrupts = <RK_PC2 IRQ_TYPE_LEVEL_LOW>; + #clock-cells = <1>; + clock-output-names = "rk808-clkout1", "rk808-clkout2"; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int_l>; + rockchip,system-power-controller; + wakeup-source; + + vcc1-supply = <&vcc5v0_sys>; + vcc2-supply = <&vcc5v0_sys>; + vcc3-supply = <&vcc5v0_sys>; + vcc4-supply = <&vcc5v0_sys>; + vcc5-supply = <&vcc_buck5>; + vcc6-supply = <&vcc_buck5>; + vcc7-supply = <&vcc5v0_sys>; + vcc8-supply = <&vcc3v3_sys>; + vcc9-supply = <&vcc5v0_sys>; + + regulators { + vdd_log: DCDC_REG1 { + regulator-name = "vdd_log"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1350000>; + regulator-initial-mode = <0x2>; + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <900000>; + }; + }; + + vdd_cpu_l: DCDC_REG2 { + regulator-name = "vdd_cpu_l"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + regulator-initial-mode = <0x2>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + regulator-initial-mode = <0x2>; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc3v3_sys: DCDC_REG4 { + regulator-name = "vcc3v3_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = <0x2>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc_buck5: DCDC_REG5 { + regulator-name = "vcc_buck5"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <2200000>; + regulator-max-microvolt = <2200000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <2200000>; + }; + }; + + vcca_0v9: LDO_REG1 { + regulator-name = "vcca_0v9"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8: LDO_REG2 { + regulator-name = "vcc_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc_0v9: LDO_REG3 { + regulator-name = "vcc_0v9"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <900000>; + }; + }; + + vcca_1v8: LDO_REG4 { + regulator-name = "vcca_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1850000>; + regulator-max-microvolt = <1850000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + /* + * As per BSP, but schematic not showing any regulator + * pin for LD05. + */ + vdd1v5_dvp: LDO_REG5 { + regulator-name = "vdd1v5_dvp"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v5: LDO_REG6 { + regulator-name = "vcc_1v5"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vccio_3v0: LDO_REG7 { + regulator-name = "vccio_3v0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vccio_sd: LDO_REG8 { + regulator-name = "vccio_sd"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + /* + * As per BSP, but schematic not showing any regulator + * pin for LD09. + */ + vcc_sd: LDO_REG9 { + regulator-name = "vcc_sd"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc5v0_usb2: SWITCH_REG1 { + regulator-name = "vcc5v0_usb2"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <5000000>; + }; + }; + + vccio_3v3: vcc_lan: SWITCH_REG2 { + regulator-name = "vccio_3v3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; +}; + +&io_domains { + status = "okay"; + bt656-supply = <&vcca_1v8>; + sdmmc-supply = <&vccio_sd>; + gpio1830-supply = <&vccio_3v0>; +}; + +&pmu_io_domains { + status = "okay"; + pmu1830-supply = <&vcc_1v8>; +}; + +&sdhci { + bus-width = <8>; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; + non-removable; + status = "okay"; +}; + +&tsadc { + status = "okay"; + rockchip,hw-tshut-mode = <1>; + rockchip,hw-tshut-polarity = <1>; +}; + +&pinctrl { + pmic { + pmic_int_l: pmic-int-l { + rockchip,pins = + <1 RK_PC2 0 &pcfg_pull_up>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi index 8ec40a0b8b1e..5b18bda9c5a6 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi +++ b/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi @@ -633,7 +633,8 @@ pinctrl-0 = <&pinctrl_nand>; clock-names = "nand", "nand_x", "ecc"; clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>; - resets = <&sys_rst 2>; + reset-names = "nand", "reg"; + resets = <&sys_rst 2>, <&sys_rst 2>; }; }; }; diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi index b658f2b641e2..f2dc5f695020 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi +++ b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi @@ -937,7 +937,8 @@ pinctrl-0 = <&pinctrl_nand>; clock-names = "nand", "nand_x", "ecc"; clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>; - resets = <&sys_rst 2>; + reset-names = "nand", "reg"; + resets = <&sys_rst 2>, <&sys_rst 2>; }; }; }; diff --git a/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi b/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi index d6f6cee4d549..73e7e1203b09 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi +++ b/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi @@ -795,7 +795,8 @@ pinctrl-0 = <&pinctrl_nand>; clock-names = "nand", "nand_x", "ecc"; clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>; - resets = <&sys_rst 2>; + reset-names = "nand", "reg"; + resets = <&sys_rst 2>, <&sys_rst 2>; }; }; }; diff --git a/arch/arm64/boot/dts/sprd/Makefile b/arch/arm64/boot/dts/sprd/Makefile index 2bdc23804f40..f4f1f5148cc2 100644 --- a/arch/arm64/boot/dts/sprd/Makefile +++ b/arch/arm64/boot/dts/sprd/Makefile @@ -1,3 +1,4 @@ # SPDX-License-Identifier: GPL-2.0 dtb-$(CONFIG_ARCH_SPRD) += sc9836-openphone.dtb \ - sp9860g-1h10.dtb + sp9860g-1h10.dtb \ + sp9863a-1h10.dtb diff --git a/arch/arm64/boot/dts/sprd/sc9863a.dtsi b/arch/arm64/boot/dts/sprd/sc9863a.dtsi new file mode 100644 index 000000000000..cd80756c888d --- /dev/null +++ b/arch/arm64/boot/dts/sprd/sc9863a.dtsi @@ -0,0 +1,523 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Unisoc SC9863A SoC DTS file + * + * Copyright (C) 2019, Unisoc Inc. + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include "sharkl3.dtsi" + +/ { + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu-map { + cluster0 { + core0 { + cpu = <&CPU0>; + }; + core1 { + cpu = <&CPU1>; + }; + core2 { + cpu = <&CPU2>; + }; + core3 { + cpu = <&CPU3>; + }; + core4 { + cpu = <&CPU4>; + }; + core5 { + cpu = <&CPU5>; + }; + core6 { + cpu = <&CPU6>; + }; + core7 { + cpu = <&CPU7>; + }; + }; + }; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x0 0x0>; + enable-method = "psci"; + cpu-idle-states = <&CORE_PD>; + }; + + CPU1: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x0 0x100>; + enable-method = "psci"; + cpu-idle-states = <&CORE_PD>; + }; + + CPU2: cpu@200 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x0 0x200>; + enable-method = "psci"; + cpu-idle-states = <&CORE_PD>; + }; + + CPU3: cpu@300 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x0 0x300>; + enable-method = "psci"; + cpu-idle-states = <&CORE_PD>; + }; + + CPU4: cpu@400 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x0 0x400>; + enable-method = "psci"; + cpu-idle-states = <&CORE_PD>; + }; + + CPU5: cpu@500 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x0 0x500>; + enable-method = "psci"; + cpu-idle-states = <&CORE_PD>; + }; + + CPU6: cpu@600 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x0 0x600>; + enable-method = "psci"; + cpu-idle-states = <&CORE_PD>; + }; + + CPU7: cpu@700 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x0 0x700>; + enable-method = "psci"; + cpu-idle-states = <&CORE_PD>; + }; + }; + + idle-states { + entry-method = "arm,psci"; + CORE_PD: core-pd { + compatible = "arm,idle-state"; + entry-latency-us = <4000>; + exit-latency-us = <4000>; + min-residency-us = <10000>; + local-timer-stop; + arm,psci-suspend-param = <0x00010000>; + }; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>, /* Physical Secure PPI */ + <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>, /* Physical Non-Secure PPI */ + <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>, /* Virtual PPI */ + <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH>; /* Hipervisor PPI */ + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>; + }; + + soc { + gic: interrupt-controller@14000000 { + compatible = "arm,gic-v3"; + #interrupt-cells = <3>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + redistributor-stride = <0x0 0x20000>; /* 128KB stride */ + #redistributor-regions = <1>; + interrupt-controller; + reg = <0x0 0x14000000 0 0x20000>, /* GICD */ + <0x0 0x14040000 0 0x100000>; /* GICR */ + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + }; + + funnel@10001000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0x10001000 0 0x1000>; + clocks = <&ext_26m>; + clock-names = "apb_pclk"; + + out-ports { + port { + funnel_soc_out_port: endpoint { + remote-endpoint = <&etb_in>; + }; + }; + }; + + in-ports { + port { + funnel_soc_in_port: endpoint { + remote-endpoint = + <&funnel_ca55_out_port>; + }; + }; + }; + }; + + etb@10003000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0 0x10003000 0 0x1000>; + clocks = <&ext_26m>; + clock-names = "apb_pclk"; + + in-ports { + port { + etb_in: endpoint { + remote-endpoint = + <&funnel_soc_out_port>; + }; + }; + }; + }; + + funnel@12001000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0x12001000 0 0x1000>; + clocks = <&ext_26m>; + clock-names = "apb_pclk"; + + out-ports { + port { + funnel_little_out_port: endpoint { + remote-endpoint = + <&etf_little_in>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + funnel_little_in_port0: endpoint { + remote-endpoint = <&etm0_out>; + }; + }; + + port@1 { + reg = <1>; + funnel_little_in_port1: endpoint { + remote-endpoint = <&etm1_out>; + }; + }; + + port@2 { + reg = <2>; + funnel_little_in_port2: endpoint { + remote-endpoint = <&etm2_out>; + }; + }; + + port@3 { + reg = <3>; + funnel_little_in_port3: endpoint { + remote-endpoint = <&etm3_out>; + }; + }; + }; + }; + + etf@12002000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0 0x12002000 0 0x1000>; + clocks = <&ext_26m>; + clock-names = "apb_pclk"; + + out-ports { + port { + etf_little_out: endpoint { + remote-endpoint = + <&funnel_ca55_in_port0>; + }; + }; + }; + + in-port { + port { + etf_little_in: endpoint { + remote-endpoint = + <&funnel_little_out_port>; + }; + }; + }; + }; + + etf@12003000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0 0x12003000 0 0x1000>; + clocks = <&ext_26m>; + clock-names = "apb_pclk"; + + out-ports { + port { + etf_big_out: endpoint { + remote-endpoint = + <&funnel_ca55_in_port1>; + }; + }; + }; + + in-ports { + port { + etf_big_in: endpoint { + remote-endpoint = + <&funnel_big_out_port>; + }; + }; + }; + }; + + funnel@12004000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0x12004000 0 0x1000>; + clocks = <&ext_26m>; + clock-names = "apb_pclk"; + + out-ports { + port { + funnel_ca55_out_port: endpoint { + remote-endpoint = + <&funnel_soc_in_port>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + funnel_ca55_in_port0: endpoint { + remote-endpoint = + <&etf_little_out>; + }; + }; + + port@1 { + reg = <1>; + funnel_ca55_in_port1: endpoint { + remote-endpoint = + <&etf_big_out>; + }; + }; + }; + }; + + funnel@12005000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0x12005000 0 0x1000>; + clocks = <&ext_26m>; + clock-names = "apb_pclk"; + + out-ports { + port { + funnel_big_out_port: endpoint { + remote-endpoint = + <&etf_big_in>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + funnel_big_in_port0: endpoint { + remote-endpoint = <&etm4_out>; + }; + }; + + port@1 { + reg = <1>; + funnel_big_in_port1: endpoint { + remote-endpoint = <&etm5_out>; + }; + }; + + port@2 { + reg = <2>; + funnel_big_in_port2: endpoint { + remote-endpoint = <&etm6_out>; + }; + }; + + port@3 { + reg = <3>; + funnel_big_in_port3: endpoint { + remote-endpoint = <&etm7_out>; + }; + }; + }; + }; + + etm@13040000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x13040000 0 0x1000>; + cpu = <&CPU0>; + clocks = <&ext_26m>; + clock-names = "apb_pclk"; + + out-ports { + port { + etm0_out: endpoint { + remote-endpoint = + <&funnel_little_in_port0>; + }; + }; + }; + }; + + etm@13140000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x13140000 0 0x1000>; + cpu = <&CPU1>; + clocks = <&ext_26m>; + clock-names = "apb_pclk"; + + out-ports { + port { + etm1_out: endpoint { + remote-endpoint = + <&funnel_little_in_port1>; + }; + }; + }; + }; + + etm@13240000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x13240000 0 0x1000>; + cpu = <&CPU2>; + clocks = <&ext_26m>; + clock-names = "apb_pclk"; + + out-ports { + port { + etm2_out: endpoint { + remote-endpoint = + <&funnel_little_in_port2>; + }; + }; + }; + }; + + etm@13340000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x13340000 0 0x1000>; + cpu = <&CPU3>; + clocks = <&ext_26m>; + clock-names = "apb_pclk"; + + out-ports { + port { + etm3_out: endpoint { + remote-endpoint = + <&funnel_little_in_port3>; + }; + }; + }; + }; + + etm@13440000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x13440000 0 0x1000>; + cpu = <&CPU4>; + clocks = <&ext_26m>; + clock-names = "apb_pclk"; + + out-ports { + port { + etm4_out: endpoint { + remote-endpoint = + <&funnel_big_in_port0>; + }; + }; + }; + }; + + etm@13540000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x13540000 0 0x1000>; + cpu = <&CPU5>; + clocks = <&ext_26m>; + clock-names = "apb_pclk"; + + out-ports { + port { + etm5_out: endpoint { + remote-endpoint = + <&funnel_big_in_port1>; + }; + }; + }; + }; + + etm@13640000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x13640000 0 0x1000>; + cpu = <&CPU6>; + clocks = <&ext_26m>; + clock-names = "apb_pclk"; + + out-ports { + port { + etm6_out: endpoint { + remote-endpoint = + <&funnel_big_in_port2>; + }; + }; + }; + }; + + etm@13740000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x13740000 0 0x1000>; + cpu = <&CPU7>; + clocks = <&ext_26m>; + clock-names = "apb_pclk"; + + out-ports { + port { + etm7_out: endpoint { + remote-endpoint = + <&funnel_big_in_port3>; + }; + }; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/sprd/sharkl3.dtsi b/arch/arm64/boot/dts/sprd/sharkl3.dtsi new file mode 100644 index 000000000000..0222128b10f7 --- /dev/null +++ b/arch/arm64/boot/dts/sprd/sharkl3.dtsi @@ -0,0 +1,78 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Unisoc Sharkl3 platform DTS file + * + * Copyright (C) 2019, Unisoc Inc. + */ + +/ { + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + soc: soc { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + apb@70000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x0 0x70000000 0x10000000>; + + uart0: serial@0 { + compatible = "sprd,sc9863a-uart", + "sprd,sc9836-uart"; + reg = <0x0 0x100>; + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ext_26m>; + status = "disabled"; + }; + + uart1: serial@100000 { + compatible = "sprd,sc9863a-uart", + "sprd,sc9836-uart"; + reg = <0x100000 0x100>; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ext_26m>; + status = "disabled"; + }; + + uart2: serial@200000 { + compatible = "sprd,sc9863a-uart", + "sprd,sc9836-uart"; + reg = <0x200000 0x100>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ext_26m>; + status = "disabled"; + }; + + uart3: serial@300000 { + compatible = "sprd,sc9863a-uart", + "sprd,sc9836-uart"; + reg = <0x300000 0x100>; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ext_26m>; + status = "disabled"; + }; + + uart4: serial@400000 { + compatible = "sprd,sc9863a-uart", + "sprd,sc9836-uart"; + reg = <0x400000 0x100>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ext_26m>; + status = "disabled"; + }; + }; + }; + + ext_26m: ext-26m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <26000000>; + clock-output-names = "ext-26m"; + }; +}; diff --git a/arch/arm64/boot/dts/sprd/sp9863a-1h10.dts b/arch/arm64/boot/dts/sprd/sp9863a-1h10.dts new file mode 100644 index 000000000000..5c32c1596337 --- /dev/null +++ b/arch/arm64/boot/dts/sprd/sp9863a-1h10.dts @@ -0,0 +1,39 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Unisoc SP9863A-1h10 boards DTS file + * + * Copyright (C) 2019, Unisoc Inc. + */ + +/dts-v1/; + +#include "sc9863a.dtsi" + +/ { + model = "Spreadtrum SP9863A-1H10 Board"; + + compatible = "sprd,sp9863a-1h10", "sprd,sc9863a"; + + aliases { + serial0 = &uart0; + serial1 = &uart1; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x0 0x80000000 0x0 0x80000000>; + }; + + chosen { + stdout-path = "serial1:115200n8"; + bootargs = "earlycon"; + }; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi index ca70ff73f171..e5df20a2d2f9 100644 --- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi @@ -42,7 +42,7 @@ */ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; - gic_its: gic-its@18200000 { + gic_its: gic-its@1820000 { compatible = "arm,gic-v3-its"; reg = <0x00 0x01820000 0x00 0x10000>; socionext,synquacer-pre-its = <0x1000000 0x400000>; @@ -51,23 +51,12 @@ }; }; - secure_proxy_main: mailbox@32c00000 { - compatible = "ti,am654-secure-proxy"; - #mbox-cells = <1>; - reg-names = "target_data", "rt", "scfg"; - reg = <0x00 0x32c00000 0x00 0x100000>, - <0x00 0x32400000 0x00 0x100000>, - <0x00 0x32800000 0x00 0x100000>; - interrupt-names = "rx_011"; - interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; - }; - serdes0: serdes@900000 { compatible = "ti,phy-am654-serdes"; reg = <0x0 0x900000 0x0 0x2000>; reg-names = "serdes"; #phy-cells = <2>; - power-domains = <&k3_pds 153>; + power-domains = <&k3_pds 153 TI_SCI_PD_EXCLUSIVE>; clocks = <&k3_clks 153 4>, <&k3_clks 153 1>, <&serdes1 AM654_SERDES_LO_REFCLK>; clock-output-names = "serdes0_cmu_refclk", "serdes0_lo_refclk", "serdes0_ro_refclk"; assigned-clocks = <&k3_clks 153 4>, <&serdes0 AM654_SERDES_CMU_REFCLK>; @@ -82,7 +71,7 @@ reg = <0x0 0x910000 0x0 0x2000>; reg-names = "serdes"; #phy-cells = <2>; - power-domains = <&k3_pds 154>; + power-domains = <&k3_pds 154 TI_SCI_PD_EXCLUSIVE>; clocks = <&serdes0 AM654_SERDES_RO_REFCLK>, <&k3_clks 154 1>, <&k3_clks 154 5>; clock-output-names = "serdes1_cmu_refclk", "serdes1_lo_refclk", "serdes1_ro_refclk"; assigned-clocks = <&k3_clks 154 5>, <&serdes1 AM654_SERDES_CMU_REFCLK>; @@ -100,7 +89,7 @@ interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <48000000>; current-speed = <115200>; - power-domains = <&k3_pds 146>; + power-domains = <&k3_pds 146 TI_SCI_PD_EXCLUSIVE>; }; main_uart1: serial@2810000 { @@ -110,7 +99,7 @@ reg-io-width = <4>; interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <48000000>; - power-domains = <&k3_pds 147>; + power-domains = <&k3_pds 147 TI_SCI_PD_EXCLUSIVE>; }; main_uart2: serial@2820000 { @@ -120,7 +109,7 @@ reg-io-width = <4>; interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <48000000>; - power-domains = <&k3_pds 148>; + power-domains = <&k3_pds 148 TI_SCI_PD_EXCLUSIVE>; }; main_pmx0: pinmux@11c000 { @@ -147,7 +136,7 @@ #size-cells = <0>; clock-names = "fck"; clocks = <&k3_clks 110 1>; - power-domains = <&k3_pds 110>; + power-domains = <&k3_pds 110 TI_SCI_PD_EXCLUSIVE>; }; main_i2c1: i2c@2010000 { @@ -158,7 +147,7 @@ #size-cells = <0>; clock-names = "fck"; clocks = <&k3_clks 111 1>; - power-domains = <&k3_pds 111>; + power-domains = <&k3_pds 111 TI_SCI_PD_EXCLUSIVE>; }; main_i2c2: i2c@2020000 { @@ -169,7 +158,7 @@ #size-cells = <0>; clock-names = "fck"; clocks = <&k3_clks 112 1>; - power-domains = <&k3_pds 112>; + power-domains = <&k3_pds 112 TI_SCI_PD_EXCLUSIVE>; }; main_i2c3: i2c@2030000 { @@ -180,14 +169,14 @@ #size-cells = <0>; clock-names = "fck"; clocks = <&k3_clks 113 1>; - power-domains = <&k3_pds 113>; + power-domains = <&k3_pds 113 TI_SCI_PD_EXCLUSIVE>; }; ecap0: pwm@3100000 { compatible = "ti,am654-ecap", "ti,am3352-ecap"; #pwm-cells = <3>; reg = <0x0 0x03100000 0x0 0x60>; - power-domains = <&k3_pds 39>; + power-domains = <&k3_pds 39 TI_SCI_PD_EXCLUSIVE>; clocks = <&k3_clks 39 0>; clock-names = "fck"; }; @@ -197,7 +186,7 @@ reg = <0x0 0x2100000 0x0 0x400>; interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; clocks = <&k3_clks 137 1>; - power-domains = <&k3_pds 137>; + power-domains = <&k3_pds 137 TI_SCI_PD_EXCLUSIVE>; #address-cells = <1>; #size-cells = <0>; }; @@ -207,7 +196,7 @@ reg = <0x0 0x2110000 0x0 0x400>; interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>; clocks = <&k3_clks 138 1>; - power-domains = <&k3_pds 138>; + power-domains = <&k3_pds 138 TI_SCI_PD_EXCLUSIVE>; #address-cells = <1>; #size-cells = <0>; assigned-clocks = <&k3_clks 137 1>; @@ -219,7 +208,7 @@ reg = <0x0 0x2120000 0x0 0x400>; interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>; clocks = <&k3_clks 139 1>; - power-domains = <&k3_pds 139>; + power-domains = <&k3_pds 139 TI_SCI_PD_EXCLUSIVE>; #address-cells = <1>; #size-cells = <0>; }; @@ -229,7 +218,7 @@ reg = <0x0 0x2130000 0x0 0x400>; interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>; clocks = <&k3_clks 140 1>; - power-domains = <&k3_pds 140>; + power-domains = <&k3_pds 140 TI_SCI_PD_EXCLUSIVE>; #address-cells = <1>; #size-cells = <0>; }; @@ -239,7 +228,7 @@ reg = <0x0 0x2140000 0x0 0x400>; interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; clocks = <&k3_clks 141 1>; - power-domains = <&k3_pds 141>; + power-domains = <&k3_pds 141 TI_SCI_PD_EXCLUSIVE>; #address-cells = <1>; #size-cells = <0>; }; @@ -247,7 +236,7 @@ sdhci0: sdhci@4f80000 { compatible = "ti,am654-sdhci-5.1"; reg = <0x0 0x4f80000 0x0 0x260>, <0x0 0x4f90000 0x0 0x134>; - power-domains = <&k3_pds 47>; + power-domains = <&k3_pds 47 TI_SCI_PD_EXCLUSIVE>; clocks = <&k3_clks 47 0>, <&k3_clks 47 1>; clock-names = "clk_ahb", "clk_xin"; interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>; @@ -306,7 +295,7 @@ ranges = <0x0 0x0 0x4000000 0x20000>; interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; dma-coherent; - power-domains = <&k3_pds 151>; + power-domains = <&k3_pds 151 TI_SCI_PD_EXCLUSIVE>; assigned-clocks = <&k3_clks 151 2>, <&k3_clks 151 7>; assigned-clock-parents = <&k3_clks 151 4>, /* set REF_CLK to 20MHz i.e. PER0_PLL/48 */ <&k3_clks 151 9>; /* set PIPE3_TXB_CLK to CLK_12M_RC/256 (for HS only) */ @@ -345,7 +334,7 @@ ranges = <0x0 0x0 0x4020000 0x20000>; interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; dma-coherent; - power-domains = <&k3_pds 152>; + power-domains = <&k3_pds 152 TI_SCI_PD_EXCLUSIVE>; assigned-clocks = <&k3_clks 152 2>; assigned-clock-parents = <&k3_clks 152 4>; /* set REF_CLK to 20MHz i.e. PER0_PLL/48 */ @@ -385,11 +374,15 @@ ti,sci-rm-range-girq = <0x1>; }; - cbass_main_navss: interconnect0 { - compatible = "simple-bus"; + main_navss { + compatible = "simple-mfd"; #address-cells = <2>; #size-cells = <2>; ranges; + dma-coherent; + dma-ranges; + + ti,sci-dev-id = <118>; intr_main_navss: interrupt-controller1 { compatible = "ti,sci-intr"; @@ -413,6 +406,166 @@ ti,sci-rm-range-vint = <0x0>; ti,sci-rm-range-global-event = <0x1>; }; + + secure_proxy_main: mailbox@32c00000 { + compatible = "ti,am654-secure-proxy"; + #mbox-cells = <1>; + reg-names = "target_data", "rt", "scfg"; + reg = <0x00 0x32c00000 0x00 0x100000>, + <0x00 0x32400000 0x00 0x100000>, + <0x00 0x32800000 0x00 0x100000>; + interrupt-names = "rx_011"; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + }; + + hwspinlock: spinlock@30e00000 { + compatible = "ti,am654-hwspinlock"; + reg = <0x00 0x30e00000 0x00 0x1000>; + #hwlock-cells = <1>; + }; + + mailbox0_cluster0: mailbox@31f80000 { + compatible = "ti,am654-mailbox"; + reg = <0x00 0x31f80000 0x00 0x200>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + interrupt-parent = <&intr_main_navss>; + }; + + mailbox0_cluster1: mailbox@31f81000 { + compatible = "ti,am654-mailbox"; + reg = <0x00 0x31f81000 0x00 0x200>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + interrupt-parent = <&intr_main_navss>; + }; + + mailbox0_cluster2: mailbox@31f82000 { + compatible = "ti,am654-mailbox"; + reg = <0x00 0x31f82000 0x00 0x200>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + interrupt-parent = <&intr_main_navss>; + }; + + mailbox0_cluster3: mailbox@31f83000 { + compatible = "ti,am654-mailbox"; + reg = <0x00 0x31f83000 0x00 0x200>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + interrupt-parent = <&intr_main_navss>; + }; + + mailbox0_cluster4: mailbox@31f84000 { + compatible = "ti,am654-mailbox"; + reg = <0x00 0x31f84000 0x00 0x200>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + interrupt-parent = <&intr_main_navss>; + }; + + mailbox0_cluster5: mailbox@31f85000 { + compatible = "ti,am654-mailbox"; + reg = <0x00 0x31f85000 0x00 0x200>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + interrupt-parent = <&intr_main_navss>; + }; + + mailbox0_cluster6: mailbox@31f86000 { + compatible = "ti,am654-mailbox"; + reg = <0x00 0x31f86000 0x00 0x200>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + interrupt-parent = <&intr_main_navss>; + }; + + mailbox0_cluster7: mailbox@31f87000 { + compatible = "ti,am654-mailbox"; + reg = <0x00 0x31f87000 0x00 0x200>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + interrupt-parent = <&intr_main_navss>; + }; + + mailbox0_cluster8: mailbox@31f88000 { + compatible = "ti,am654-mailbox"; + reg = <0x00 0x31f88000 0x00 0x200>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + interrupt-parent = <&intr_main_navss>; + }; + + mailbox0_cluster9: mailbox@31f89000 { + compatible = "ti,am654-mailbox"; + reg = <0x00 0x31f89000 0x00 0x200>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + interrupt-parent = <&intr_main_navss>; + }; + + mailbox0_cluster10: mailbox@31f8a000 { + compatible = "ti,am654-mailbox"; + reg = <0x00 0x31f8a000 0x00 0x200>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + interrupt-parent = <&intr_main_navss>; + }; + + mailbox0_cluster11: mailbox@31f8b000 { + compatible = "ti,am654-mailbox"; + reg = <0x00 0x31f8b000 0x00 0x200>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + interrupt-parent = <&intr_main_navss>; + }; + + ringacc: ringacc@3c000000 { + compatible = "ti,am654-navss-ringacc"; + reg = <0x0 0x3c000000 0x0 0x400000>, + <0x0 0x38000000 0x0 0x400000>, + <0x0 0x31120000 0x0 0x100>, + <0x0 0x33000000 0x0 0x40000>; + reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target"; + ti,num-rings = <818>; + ti,sci-rm-range-gp-rings = <0x2>; /* GP ring range */ + ti,dma-ring-reset-quirk; + ti,sci = <&dmsc>; + ti,sci-dev-id = <187>; + msi-parent = <&inta_main_udmass>; + }; + + main_udmap: dma-controller@31150000 { + compatible = "ti,am654-navss-main-udmap"; + reg = <0x0 0x31150000 0x0 0x100>, + <0x0 0x34000000 0x0 0x100000>, + <0x0 0x35000000 0x0 0x100000>; + reg-names = "gcfg", "rchanrt", "tchanrt"; + msi-parent = <&inta_main_udmass>; + #dma-cells = <1>; + + ti,sci = <&dmsc>; + ti,sci-dev-id = <188>; + ti,ringacc = <&ringacc>; + + ti,sci-rm-range-tchan = <0x1>, /* TX_HCHAN */ + <0x2>; /* TX_CHAN */ + ti,sci-rm-range-rchan = <0x4>, /* RX_HCHAN */ + <0x5>; /* RX_CHAN */ + ti,sci-rm-range-rflow = <0x6>; /* GP RFLOW */ + }; }; main_gpio0: main_gpio0@600000 { @@ -451,7 +604,7 @@ compatible = "ti,am654-pcie-rc"; reg = <0x0 0x5500000 0x0 0x1000>, <0x0 0x5501000 0x0 0x1000>, <0x0 0x10000000 0x0 0x2000>, <0x0 0x5506000 0x0 0x1000>; reg-names = "app", "dbics", "config", "atu"; - power-domains = <&k3_pds 120>; + power-domains = <&k3_pds 120 TI_SCI_PD_EXCLUSIVE>; #address-cells = <3>; #size-cells = <2>; ranges = <0x81000000 0 0 0x0 0x10020000 0 0x00010000 @@ -470,7 +623,7 @@ compatible = "ti,am654-pcie-ep"; reg = <0x0 0x5500000 0x0 0x1000>, <0x0 0x5501000 0x0 0x1000>, <0x0 0x10000000 0x0 0x8000000>, <0x0 0x5506000 0x0 0x1000>; reg-names = "app", "dbics", "addr_space", "atu"; - power-domains = <&k3_pds 120>; + power-domains = <&k3_pds 120 TI_SCI_PD_EXCLUSIVE>; ti,syscon-pcie-mode = <&pcie0_mode>; num-ib-windows = <16>; num-ob-windows = <16>; @@ -483,7 +636,7 @@ compatible = "ti,am654-pcie-rc"; reg = <0x0 0x5600000 0x0 0x1000>, <0x0 0x5601000 0x0 0x1000>, <0x0 0x18000000 0x0 0x2000>, <0x0 0x5606000 0x0 0x1000>; reg-names = "app", "dbics", "config", "atu"; - power-domains = <&k3_pds 121>; + power-domains = <&k3_pds 121 TI_SCI_PD_EXCLUSIVE>; #address-cells = <3>; #size-cells = <2>; ranges = <0x81000000 0 0 0x0 0x18020000 0 0x00010000 @@ -502,7 +655,7 @@ compatible = "ti,am654-pcie-ep"; reg = <0x0 0x5600000 0x0 0x1000>, <0x0 0x5601000 0x0 0x1000>, <0x0 0x18000000 0x0 0x4000000>, <0x0 0x5606000 0x0 0x1000>; reg-names = "app", "dbics", "addr_space", "atu"; - power-domains = <&k3_pds 121>; + power-domains = <&k3_pds 121 TI_SCI_PD_EXCLUSIVE>; ti,syscon-pcie-mode = <&pcie1_mode>; num-ib-windows = <16>; num-ob-windows = <16>; @@ -510,4 +663,83 @@ dma-coherent; interrupts = <GIC_SPI 355 IRQ_TYPE_EDGE_RISING>; }; + + mcasp0: mcasp@2b00000 { + compatible = "ti,am33xx-mcasp-audio"; + reg = <0x0 0x02b00000 0x0 0x2000>, + <0x0 0x02b08000 0x0 0x1000>; + reg-names = "mpu","dat"; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tx", "rx"; + + dmas = <&main_udmap 0xc400>, <&main_udmap 0x4400>; + dma-names = "tx", "rx"; + + clocks = <&k3_clks 104 0>; + clock-names = "fck"; + power-domains = <&k3_pds 104 TI_SCI_PD_EXCLUSIVE>; + + status = "disabled"; + }; + + mcasp1: mcasp@2b10000 { + compatible = "ti,am33xx-mcasp-audio"; + reg = <0x0 0x02b10000 0x0 0x2000>, + <0x0 0x02b18000 0x0 0x1000>; + reg-names = "mpu","dat"; + interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tx", "rx"; + + dmas = <&main_udmap 0xc401>, <&main_udmap 0x4401>; + dma-names = "tx", "rx"; + + clocks = <&k3_clks 105 0>; + clock-names = "fck"; + power-domains = <&k3_pds 105 TI_SCI_PD_EXCLUSIVE>; + + status = "disabled"; + }; + + mcasp2: mcasp@2b20000 { + compatible = "ti,am33xx-mcasp-audio"; + reg = <0x0 0x02b20000 0x0 0x2000>, + <0x0 0x02b28000 0x0 0x1000>; + reg-names = "mpu","dat"; + interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tx", "rx"; + + dmas = <&main_udmap 0xc402>, <&main_udmap 0x4402>; + dma-names = "tx", "rx"; + + clocks = <&k3_clks 106 0>; + clock-names = "fck"; + power-domains = <&k3_pds 106 TI_SCI_PD_EXCLUSIVE>; + + status = "disabled"; + }; + + cal: cal@6f03000 { + compatible = "ti,am654-cal"; + reg = <0x0 0x06f03000 0x0 0x400>, + <0x0 0x06f03800 0x0 0x40>; + reg-names = "cal_top", + "cal_rx_core0"; + interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; + ti,camerrx-control = <&scm_conf 0x40c0>; + clock-names = "fck"; + clocks = <&k3_clks 2 0>; + power-domains = <&k3_pds 2 TI_SCI_PD_EXCLUSIVE>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + csi2_0: port@0 { + reg = <0>; + }; + }; + }; }; diff --git a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi index afc29eaa2638..92629cbdc184 100644 --- a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi @@ -6,6 +6,14 @@ */ &cbass_mcu { + mcu_conf: scm_conf@40f00000 { + compatible = "syscon", "simple-mfd"; + reg = <0x0 0x40f00000 0x0 0x20000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x40f00000 0x20000>; + }; + mcu_uart0: serial@40a00000 { compatible = "ti,am654-uart"; reg = <0x00 0x40a00000 0x00 0x100>; @@ -14,7 +22,7 @@ interrupts = <GIC_SPI 565 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <96000000>; current-speed = <115200>; - power-domains = <&k3_pds 149>; + power-domains = <&k3_pds 149 TI_SCI_PD_EXCLUSIVE>; }; mcu_ram: sram@41c00000 { @@ -33,7 +41,7 @@ #size-cells = <0>; clock-names = "fck"; clocks = <&k3_clks 114 1>; - power-domains = <&k3_pds 114>; + power-domains = <&k3_pds 114 TI_SCI_PD_EXCLUSIVE>; }; mcu_spi0: spi@40300000 { @@ -41,7 +49,7 @@ reg = <0x0 0x40300000 0x0 0x400>; interrupts = <GIC_SPI 560 IRQ_TYPE_LEVEL_HIGH>; clocks = <&k3_clks 142 1>; - power-domains = <&k3_pds 142>; + power-domains = <&k3_pds 142 TI_SCI_PD_EXCLUSIVE>; #address-cells = <1>; #size-cells = <0>; }; @@ -51,7 +59,7 @@ reg = <0x0 0x40310000 0x0 0x400>; interrupts = <GIC_SPI 561 IRQ_TYPE_LEVEL_HIGH>; clocks = <&k3_clks 143 1>; - power-domains = <&k3_pds 143>; + power-domains = <&k3_pds 143 TI_SCI_PD_EXCLUSIVE>; #address-cells = <1>; #size-cells = <0>; }; @@ -61,7 +69,7 @@ reg = <0x0 0x40320000 0x0 0x400>; interrupts = <GIC_SPI 562 IRQ_TYPE_LEVEL_HIGH>; clocks = <&k3_clks 144 1>; - power-domains = <&k3_pds 144>; + power-domains = <&k3_pds 144 TI_SCI_PD_EXCLUSIVE>; #address-cells = <1>; #size-cells = <0>; }; @@ -95,4 +103,88 @@ compatible = "ti,am654-adc", "ti,am3359-adc"; }; }; + + mcu_navss { + compatible = "simple-mfd"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + dma-coherent; + dma-ranges; + + ti,sci-dev-id = <119>; + + mcu_ringacc: ringacc@2b800000 { + compatible = "ti,am654-navss-ringacc"; + reg = <0x0 0x2b800000 0x0 0x400000>, + <0x0 0x2b000000 0x0 0x400000>, + <0x0 0x28590000 0x0 0x100>, + <0x0 0x2a500000 0x0 0x40000>; + reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target"; + ti,num-rings = <286>; + ti,sci-rm-range-gp-rings = <0x2>; /* GP ring range */ + ti,dma-ring-reset-quirk; + ti,sci = <&dmsc>; + ti,sci-dev-id = <195>; + msi-parent = <&inta_main_udmass>; + }; + + mcu_udmap: dma-controller@285c0000 { + compatible = "ti,am654-navss-mcu-udmap"; + reg = <0x0 0x285c0000 0x0 0x100>, + <0x0 0x2a800000 0x0 0x40000>, + <0x0 0x2aa00000 0x0 0x40000>; + reg-names = "gcfg", "rchanrt", "tchanrt"; + msi-parent = <&inta_main_udmass>; + #dma-cells = <1>; + + ti,sci = <&dmsc>; + ti,sci-dev-id = <194>; + ti,ringacc = <&mcu_ringacc>; + + ti,sci-rm-range-tchan = <0x1>, /* TX_HCHAN */ + <0x2>; /* TX_CHAN */ + ti,sci-rm-range-rchan = <0x3>, /* RX_HCHAN */ + <0x4>; /* RX_CHAN */ + ti,sci-rm-range-rflow = <0x5>; /* GP RFLOW */ + }; + }; + + fss: fss@47000000 { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + ospi0: spi@47040000 { + compatible = "ti,am654-ospi", "cdns,qspi-nor"; + reg = <0x0 0x47040000 0x0 0x100>, + <0x5 0x00000000 0x1 0x0000000>; + interrupts = <GIC_SPI 552 IRQ_TYPE_LEVEL_HIGH>; + cdns,fifo-depth = <256>; + cdns,fifo-width = <4>; + cdns,trigger-address = <0x0>; + clocks = <&k3_clks 248 0>; + assigned-clocks = <&k3_clks 248 0>; + assigned-clock-parents = <&k3_clks 248 2>; + assigned-clock-rates = <166666666>; + power-domains = <&k3_pds 248 TI_SCI_PD_EXCLUSIVE>; + #address-cells = <1>; + #size-cells = <0>; + }; + + ospi1: spi@47050000 { + compatible = "ti,am654-ospi", "cdns,qspi-nor"; + reg = <0x0 0x47050000 0x0 0x100>, + <0x7 0x00000000 0x1 0x00000000>; + interrupts = <GIC_SPI 553 IRQ_TYPE_LEVEL_HIGH>; + cdns,fifo-depth = <256>; + cdns,fifo-width = <4>; + cdns,trigger-address = <0x0>; + clocks = <&k3_clks 249 6>; + power-domains = <&k3_pds 249 TI_SCI_PD_EXCLUSIVE>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; }; diff --git a/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi index 9cf2c0849a24..f4227e2743f2 100644 --- a/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi @@ -20,7 +20,7 @@ k3_pds: power-controller { compatible = "ti,sci-pm-domain"; - #power-domain-cells = <1>; + #power-domain-cells = <2>; }; k3_clks: clocks { @@ -50,7 +50,7 @@ interrupts = <GIC_SPI 697 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <48000000>; current-speed = <115200>; - power-domains = <&k3_pds 150>; + power-domains = <&k3_pds 150 TI_SCI_PD_EXCLUSIVE>; }; wkup_i2c0: i2c@42120000 { @@ -61,7 +61,7 @@ #size-cells = <0>; clock-names = "fck"; clocks = <&k3_clks 115 1>; - power-domains = <&k3_pds 115>; + power-domains = <&k3_pds 115 TI_SCI_PD_EXCLUSIVE>; }; intr_wkup_gpio: interrupt-controller2 { diff --git a/arch/arm64/boot/dts/ti/k3-am65.dtsi b/arch/arm64/boot/dts/ti/k3-am65.dtsi index 82edf10b2378..aea36e29dd32 100644 --- a/arch/arm64/boot/dts/ti/k3-am65.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65.dtsi @@ -9,6 +9,7 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/pinctrl/k3.h> +#include <dt-bindings/soc/ti,sci_pm_domain.h> / { model = "Texas Instruments K3 AM654 SoC"; @@ -73,13 +74,18 @@ /* MCUSS Range */ <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>, <0x00 0x40200000 0x00 0x40200000 0x00 0x00900100>, + <0x00 0x40f00000 0x00 0x40f00000 0x00 0x00020000>, /* CTRL_MMR0 */ <0x00 0x41000000 0x00 0x41000000 0x00 0x00020000>, <0x00 0x41400000 0x00 0x41400000 0x00 0x00020000>, <0x00 0x41c00000 0x00 0x41c00000 0x00 0x00080000>, <0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>, <0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>, <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>, - <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>; + <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>, + <0x00 0x50000000 0x00 0x50000000 0x00 0x8000000>, + <0x00 0x70000000 0x00 0x70000000 0x00 0x200000>, + <0x05 0x00000000 0x05 0x00000000 0x01 0x0000000>, + <0x07 0x00000000 0x07 0x00000000 0x01 0x0000000>; cbass_mcu: interconnect@28380000 { compatible = "simple-bus"; @@ -87,13 +93,17 @@ #size-cells = <2>; ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>, /* MCU NAVSS*/ <0x00 0x40200000 0x00 0x40200000 0x00 0x00900100>, /* First peripheral window */ + <0x00 0x40f00000 0x00 0x40f00000 0x00 0x00020000>, /* CTRL_MMR0 */ <0x00 0x41000000 0x00 0x41000000 0x00 0x00020000>, /* MCU R5F Core0 */ <0x00 0x41400000 0x00 0x41400000 0x00 0x00020000>, /* MCU R5F Core1 */ <0x00 0x41c00000 0x00 0x41c00000 0x00 0x00080000>, /* MCU SRAM */ <0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>, /* WKUP */ <0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>, /* MMRs, remaining NAVSS */ <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>, /* CPSW */ - <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>; /* OSPI space 1 */ + <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>, /* OSPI space 1 */ + <0x00 0x50000000 0x00 0x50000000 0x00 0x8000000>, /* FSS OSPI0 data region 1 */ + <0x05 0x00000000 0x05 0x00000000 0x01 0x0000000>, /* FSS OSPI0 data region 3*/ + <0x07 0x00000000 0x07 0x00000000 0x01 0x0000000>; /* FSS OSPI1 data region 3*/ cbass_wakeup: interconnect@42040000 { compatible = "simple-bus"; diff --git a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts index 52c245d36db9..1700996800eb 100644 --- a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts +++ b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts @@ -53,6 +53,12 @@ gpios = <&wkup_gpio0 27 GPIO_ACTIVE_LOW>; }; }; + + clk_ov5640_fixed: clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + }; }; &wkup_pmx0 { @@ -69,6 +75,29 @@ AM65X_WKUP_IOPAD(0x003c, PIN_INPUT, 7) /* (P2) WKUP_GPIO0_27 */ >; }; + + mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-pins_default { + pinctrl-single,pins = < + AM65X_WKUP_IOPAD(0x0000, PIN_OUTPUT, 0) /* (V1) MCU_OSPI0_CLK */ + AM65X_WKUP_IOPAD(0x0008, PIN_INPUT, 0) /* (U2) MCU_OSPI0_DQS */ + AM65X_WKUP_IOPAD(0x000c, PIN_INPUT, 0) /* (U4) MCU_OSPI0_D0 */ + AM65X_WKUP_IOPAD(0x0010, PIN_INPUT, 0) /* (U5) MCU_OSPI0_D1 */ + AM65X_WKUP_IOPAD(0x0014, PIN_INPUT, 0) /* (T2) MCU_OSPI0_D2 */ + AM65X_WKUP_IOPAD(0x0018, PIN_INPUT, 0) /* (T3) MCU_OSPI0_D3 */ + AM65X_WKUP_IOPAD(0x001c, PIN_INPUT, 0) /* (T4) MCU_OSPI0_D4 */ + AM65X_WKUP_IOPAD(0x0020, PIN_INPUT, 0) /* (T5) MCU_OSPI0_D5 */ + AM65X_WKUP_IOPAD(0x0024, PIN_INPUT, 0) /* (R2) MCU_OSPI0_D6 */ + AM65X_WKUP_IOPAD(0x0028, PIN_INPUT, 0) /* (R3) MCU_OSPI0_D7 */ + AM65X_WKUP_IOPAD(0x002c, PIN_OUTPUT, 0) /* (R4) MCU_OSPI0_CSn0 */ + >; + }; + + wkup_pca554_default: wkup_pca554_default { + pinctrl-single,pins = < + AM65X_WKUP_IOPAD(0x0034, PIN_INPUT, 7) /* (T1) MCU_OSPI1_CLK.WKUP_GPIO0_25 */ + + >; + }; }; &main_pmx0 { @@ -151,6 +180,7 @@ &main_uart0 { pinctrl-names = "default"; pinctrl-0 = <&main_uart0_pins_default>; + power-domains = <&k3_pds 146 TI_SCI_PD_SHARED>; }; &wkup_i2c0 { @@ -163,6 +193,12 @@ reg = <0x39>; gpio-controller; #gpio-cells = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&wkup_pca554_default>; + interrupt-parent = <&wkup_gpio0>; + interrupts = <25 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #interrupt-cells = <2>; }; }; @@ -183,6 +219,23 @@ pinctrl-names = "default"; pinctrl-0 = <&main_i2c1_pins_default>; clock-frequency = <400000>; + + ov5640@3c { + compatible = "ovti,ov5640"; + reg = <0x3c>; + + clocks = <&clk_ov5640_fixed>; + clock-names = "xclk"; + + port { + csi2_cam0: endpoint { + remote-endpoint = <&csi2_phy0>; + clock-lanes = <0>; + data-lanes = <1 2>; + }; + }; + }; + }; &main_i2c2 { @@ -220,6 +273,7 @@ bus-width = <8>; non-removable; ti,driver-strength-ohm = <50>; + disable-wp; }; &dwc3_1 { @@ -279,3 +333,89 @@ &pcie1_ep { status = "disabled"; }; + +&mailbox0_cluster0 { + interrupts = <164 0>; + + mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 { + ti,mbox-tx = <1 0 0>; + ti,mbox-rx = <0 0 0>; + }; +}; + +&mailbox0_cluster1 { + interrupts = <165 0>; + + mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 { + ti,mbox-tx = <1 0 0>; + ti,mbox-rx = <0 0 0>; + }; +}; + +&mailbox0_cluster2 { + status = "disabled"; +}; + +&mailbox0_cluster3 { + status = "disabled"; +}; + +&mailbox0_cluster4 { + status = "disabled"; +}; + +&mailbox0_cluster5 { + status = "disabled"; +}; + +&mailbox0_cluster6 { + status = "disabled"; +}; + +&mailbox0_cluster7 { + status = "disabled"; +}; + +&mailbox0_cluster8 { + status = "disabled"; +}; + +&mailbox0_cluster9 { + status = "disabled"; +}; + +&mailbox0_cluster10 { + status = "disabled"; +}; + +&mailbox0_cluster11 { + status = "disabled"; +}; + +&ospi0 { + pinctrl-names = "default"; + pinctrl-0 = <&mcu_fss0_ospi0_pins_default>; + + flash@0{ + compatible = "jedec,spi-nor"; + reg = <0x0>; + spi-tx-bus-width = <1>; + spi-rx-bus-width = <8>; + spi-max-frequency = <40000000>; + cdns,tshsl-ns = <60>; + cdns,tsd2d-ns = <60>; + cdns,tchsh-ns = <60>; + cdns,tslch-ns = <60>; + cdns,read-delay = <0>; + #address-cells = <1>; + #size-cells = <1>; + }; +}; + +&csi2_0 { + csi2_phy0: endpoint { + remote-endpoint = <&csi2_cam0>; + clock-lanes = <0>; + data-lanes = <1 2>; + }; +}; diff --git a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts index c680123f067c..7a5c3d4adadd 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts +++ b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts @@ -6,12 +6,128 @@ /dts-v1/; #include "k3-j721e-som-p0.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> / { chosen { stdout-path = "serial2:115200n8"; bootargs = "console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000"; }; + + gpio_keys: gpio-keys { + compatible = "gpio-keys"; + autorepeat; + pinctrl-names = "default"; + pinctrl-0 = <&sw10_button_pins_default &sw11_button_pins_default>; + + sw10: sw10 { + label = "GPIO Key USER1"; + linux,code = <BTN_0>; + gpios = <&main_gpio0 0 GPIO_ACTIVE_LOW>; + }; + + sw11: sw11 { + label = "GPIO Key USER2"; + linux,code = <BTN_1>; + gpios = <&wkup_gpio0 7 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&main_pmx0 { + sw10_button_pins_default: sw10_button_pins_default { + pinctrl-single,pins = < + J721E_IOPAD(0x0, PIN_INPUT, 7) /* (AC18) EXTINTn.GPIO0_0 */ + >; + }; + + main_mmc1_pins_default: main_mmc1_pins_default { + pinctrl-single,pins = < + J721E_IOPAD(0x254, PIN_INPUT, 0) /* (R29) MMC1_CMD */ + J721E_IOPAD(0x250, PIN_INPUT, 0) /* (P25) MMC1_CLK */ + J721E_IOPAD(0x2ac, PIN_INPUT, 0) /* (P25) MMC1_CLKLB */ + J721E_IOPAD(0x24c, PIN_INPUT, 0) /* (R24) MMC1_DAT0 */ + J721E_IOPAD(0x248, PIN_INPUT, 0) /* (P24) MMC1_DAT1 */ + J721E_IOPAD(0x244, PIN_INPUT, 0) /* (R25) MMC1_DAT2 */ + J721E_IOPAD(0x240, PIN_INPUT, 0) /* (R26) MMC1_DAT3 */ + J721E_IOPAD(0x258, PIN_INPUT, 0) /* (P23) MMC1_SDCD */ + J721E_IOPAD(0x25c, PIN_INPUT, 0) /* (R28) MMC1_SDWP */ + >; + }; + + main_usbss0_pins_default: main_usbss0_pins_default { + pinctrl-single,pins = < + J721E_IOPAD(0x290, PIN_OUTPUT, 0) /* (U6) USB0_DRVVBUS */ + >; + }; + + main_usbss1_pins_default: main_usbss1_pins_default { + pinctrl-single,pins = < + J721E_IOPAD(0x214, PIN_OUTPUT, 4) /* (V4) MCAN1_TX.USB1_DRVVBUS */ + >; + }; + + main_i2c1_exp4_pins_default: main-i2c1-exp4-pins-default { + pinctrl-single,pins = < + J721E_IOPAD(0x230, PIN_INPUT, 7) /* (U2) ECAP0_IN_APWM_OUT.GPIO1_11 */ + >; + }; + + main_i2c0_pins_default: main-i2c0-pins-default { + pinctrl-single,pins = < + J721E_IOPAD(0x220, PIN_INPUT_PULLUP, 0) /* (AC5) I2C0_SCL */ + J721E_IOPAD(0x224, PIN_INPUT_PULLUP, 0) /* (AA5) I2C0_SDA */ + >; + }; + + main_i2c1_pins_default: main-i2c1-pins-default { + pinctrl-single,pins = < + J721E_IOPAD(0x228, PIN_INPUT_PULLUP, 0) /* (Y6) I2C1_SCL */ + J721E_IOPAD(0x22c, PIN_INPUT_PULLUP, 0) /* (AA6) I2C1_SDA */ + >; + }; + + main_i2c3_pins_default: main-i2c3-pins-default { + pinctrl-single,pins = < + J721E_IOPAD(0x270, PIN_INPUT_PULLUP, 4) /* (T26) MMC2_CLK.I2C3_SCL */ + J721E_IOPAD(0x274, PIN_INPUT_PULLUP, 4) /* (T25) MMC2_CMD.I2C3_SDA */ + >; + }; + + main_i2c6_pins_default: main-i2c6-pins-default { + pinctrl-single,pins = < + J721E_IOPAD(0x1d0, PIN_INPUT_PULLUP, 2) /* (AA3) SPI0_D1.I2C6_SCL */ + J721E_IOPAD(0x1e4, PIN_INPUT_PULLUP, 2) /* (Y2) SPI1_D1.I2C6_SDA */ + >; + }; + + main_i2c1_exp4_pins_default: main-i2c1-exp4-pins-default { + pinctrl-single,pins = < + J721E_IOPAD(0x230, PIN_INPUT, 7) /* (U2) ECAP0_IN_APWM_OUT.GPIO1_11 */ + >; + }; +}; + +&wkup_pmx0 { + sw11_button_pins_default: sw11_button_pins_default { + pinctrl-single,pins = < + J721E_WKUP_IOPAD(0xcc, PIN_INPUT, 7) /* (G28) WKUP_GPIO0_7 */ + >; + }; + + mcu_fss0_ospi1_pins_default: mcu-fss0-ospi1-pins-default { + pinctrl-single,pins = < + J721E_WKUP_IOPAD(0x34, PIN_OUTPUT, 0) /* (F22) MCU_OSPI1_CLK */ + J721E_WKUP_IOPAD(0x50, PIN_OUTPUT, 0) /* (C22) MCU_OSPI1_CSn0 */ + J721E_WKUP_IOPAD(0x40, PIN_INPUT, 0) /* (D22) MCU_OSPI1_D0 */ + J721E_WKUP_IOPAD(0x44, PIN_INPUT, 0) /* (G22) MCU_OSPI1_D1 */ + J721E_WKUP_IOPAD(0x48, PIN_INPUT, 0) /* (D23) MCU_OSPI1_D2 */ + J721E_WKUP_IOPAD(0x4c, PIN_INPUT, 0) /* (C23) MCU_OSPI1_D3 */ + J721E_WKUP_IOPAD(0x3c, PIN_INPUT, 0) /* (B23) MCU_OSPI1_DQS */ + J721E_WKUP_IOPAD(0x38, PIN_INPUT, 0) /* (A23) MCU_OSPI1_LBCLKO */ + >; + }; }; &wkup_uart0 { @@ -19,6 +135,10 @@ status = "disabled"; }; +&main_uart0 { + power-domains = <&k3_pds 146 TI_SCI_PD_SHARED>; +}; + &main_uart3 { /* UART not brought out */ status = "disabled"; @@ -48,3 +168,264 @@ /* UART not brought out */ status = "disabled"; }; + +&main_gpio2 { + status = "disabled"; +}; + +&main_gpio3 { + status = "disabled"; +}; + +&main_gpio4 { + status = "disabled"; +}; + +&main_gpio5 { + status = "disabled"; +}; + +&main_gpio6 { + status = "disabled"; +}; + +&main_gpio7 { + status = "disabled"; +}; + +&wkup_gpio1 { + status = "disabled"; +}; + +&mailbox0_cluster0 { + interrupts = <214 0>; + + mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 { + ti,mbox-rx = <0 0 0>; + ti,mbox-tx = <1 0 0>; + }; + + mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 { + ti,mbox-rx = <2 0 0>; + ti,mbox-tx = <3 0 0>; + }; +}; + +&mailbox0_cluster1 { + interrupts = <215 0>; + + mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 { + ti,mbox-rx = <0 0 0>; + ti,mbox-tx = <1 0 0>; + }; + + mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 { + ti,mbox-rx = <2 0 0>; + ti,mbox-tx = <3 0 0>; + }; +}; + +&mailbox0_cluster2 { + interrupts = <216 0>; + + mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 { + ti,mbox-rx = <0 0 0>; + ti,mbox-tx = <1 0 0>; + }; + + mbox_main_r5fss1_core1: mbox-main-r5fss1-core1 { + ti,mbox-rx = <2 0 0>; + ti,mbox-tx = <3 0 0>; + }; +}; + +&mailbox0_cluster3 { + interrupts = <217 0>; + + mbox_c66_0: mbox-c66-0 { + ti,mbox-rx = <0 0 0>; + ti,mbox-tx = <1 0 0>; + }; + + mbox_c66_1: mbox-c66-1 { + ti,mbox-rx = <2 0 0>; + ti,mbox-tx = <3 0 0>; + }; +}; + +&mailbox0_cluster4 { + interrupts = <218 0>; + + mbox_c71_0: mbox-c71-0 { + ti,mbox-rx = <0 0 0>; + ti,mbox-tx = <1 0 0>; + }; +}; + +&mailbox0_cluster5 { + status = "disabled"; +}; + +&mailbox0_cluster6 { + status = "disabled"; +}; + +&mailbox0_cluster7 { + status = "disabled"; +}; + +&mailbox0_cluster8 { + status = "disabled"; +}; + +&mailbox0_cluster9 { + status = "disabled"; +}; + +&mailbox0_cluster10 { + status = "disabled"; +}; + +&mailbox0_cluster11 { + status = "disabled"; +}; + +&main_sdhci0 { + /* eMMC */ + non-removable; + ti,driver-strength-ohm = <50>; + disable-wp; +}; + +&main_sdhci1 { + /* SD/MMC */ + pinctrl-names = "default"; + pinctrl-0 = <&main_mmc1_pins_default>; + ti,driver-strength-ohm = <50>; + disable-wp; +}; + +&main_sdhci2 { + /* Unused */ + status = "disabled"; +}; + +&usbss0 { + pinctrl-names = "default"; + pinctrl-0 = <&main_usbss0_pins_default>; + ti,usb2-only; + ti,vbus-divider; +}; + +&usb0 { + dr_mode = "otg"; + maximum-speed = "high-speed"; +}; + +&usbss1 { + pinctrl-names = "default"; + pinctrl-0 = <&main_usbss1_pins_default>; + ti,usb2-only; +}; + +&usb1 { + dr_mode = "host"; + maximum-speed = "high-speed"; +}; + +&ospi1 { + pinctrl-names = "default"; + pinctrl-0 = <&mcu_fss0_ospi1_pins_default>; + + flash@0{ + compatible = "jedec,spi-nor"; + reg = <0x0>; + spi-tx-bus-width = <1>; + spi-rx-bus-width = <4>; + spi-max-frequency = <40000000>; + cdns,tshsl-ns = <60>; + cdns,tsd2d-ns = <60>; + cdns,tchsh-ns = <60>; + cdns,tslch-ns = <60>; + cdns,read-delay = <2>; + #address-cells = <1>; + #size-cells = <1>; + }; +}; + +&tscadc0 { + adc { + ti,adc-channels = <0 1 2 3 4 5 6 7>; + }; +}; + +&tscadc1 { + adc { + ti,adc-channels = <0 1 2 3 4 5 6 7>; + }; +}; + +&main_i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&main_i2c0_pins_default>; + clock-frequency = <400000>; + + exp1: gpio@20 { + compatible = "ti,tca6416"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + }; + + exp2: gpio@22 { + compatible = "ti,tca6424"; + reg = <0x22>; + gpio-controller; + #gpio-cells = <2>; + }; +}; + +&main_i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&main_i2c1_pins_default>; + clock-frequency = <400000>; + + exp4: gpio@20 { + compatible = "ti,tca6408"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&main_i2c1_exp4_pins_default>; + interrupt-parent = <&main_gpio1>; + interrupts = <11 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #interrupt-cells = <2>; + }; +}; + +&main_i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&main_i2c3_pins_default>; + clock-frequency = <400000>; + + exp3: gpio@20 { + compatible = "ti,tca6408"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + }; +}; + +&main_i2c6 { + pinctrl-names = "default"; + pinctrl-0 = <&main_i2c6_pins_default>; + clock-frequency = <400000>; + + exp5: gpio@20 { + compatible = "ti,tca6408"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + }; +}; diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi index a01308142f77..0b9d14b838a1 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi @@ -31,7 +31,7 @@ /* vcpumntirq: virtual CPU interface maintenance interrupt */ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; - gic_its: gic-its@18200000 { + gic_its: gic-its@1820000 { compatible = "arm,gic-v3-its"; reg = <0x00 0x01820000 0x00 0x10000>; socionext,synquacer-pre-its = <0x1000000 0x400000>; @@ -40,16 +40,6 @@ }; }; - smmu0: smmu@36600000 { - compatible = "arm,smmu-v3"; - reg = <0x0 0x36600000 0x0 0x100000>; - interrupt-parent = <&gic500>; - interrupts = <GIC_SPI 772 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 768 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "eventq", "gerror"; - #iommu-cells = <1>; - }; - main_gpio_intr: interrupt-controller0 { compatible = "ti,sci-intr"; ti,intr-trigger-type = <1>; @@ -61,11 +51,15 @@ ti,sci-rm-range-girq = <0x1>; }; - cbass_main_navss: interconnect0 { - compatible = "simple-bus"; + main_navss { + compatible = "simple-mfd"; #address-cells = <2>; #size-cells = <2>; ranges; + dma-coherent; + dma-ranges; + + ti,sci-dev-id = <199>; main_navss_intr: interrupt-controller1 { compatible = "ti,sci-intr"; @@ -89,17 +83,177 @@ ti,sci-rm-range-vint = <0xa>; ti,sci-rm-range-global-event = <0xd>; }; - }; - secure_proxy_main: mailbox@32c00000 { - compatible = "ti,am654-secure-proxy"; - #mbox-cells = <1>; - reg-names = "target_data", "rt", "scfg"; - reg = <0x00 0x32c00000 0x00 0x100000>, - <0x00 0x32400000 0x00 0x100000>, - <0x00 0x32800000 0x00 0x100000>; - interrupt-names = "rx_011"; - interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + secure_proxy_main: mailbox@32c00000 { + compatible = "ti,am654-secure-proxy"; + #mbox-cells = <1>; + reg-names = "target_data", "rt", "scfg"; + reg = <0x00 0x32c00000 0x00 0x100000>, + <0x00 0x32400000 0x00 0x100000>, + <0x00 0x32800000 0x00 0x100000>; + interrupt-names = "rx_011"; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + }; + + smmu0: smmu@36600000 { + compatible = "arm,smmu-v3"; + reg = <0x0 0x36600000 0x0 0x100000>; + interrupt-parent = <&gic500>; + interrupts = <GIC_SPI 772 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 768 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "eventq", "gerror"; + #iommu-cells = <1>; + }; + + hwspinlock: spinlock@30e00000 { + compatible = "ti,am654-hwspinlock"; + reg = <0x00 0x30e00000 0x00 0x1000>; + #hwlock-cells = <1>; + }; + + mailbox0_cluster0: mailbox@31f80000 { + compatible = "ti,am654-mailbox"; + reg = <0x00 0x31f80000 0x00 0x200>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + interrupt-parent = <&main_navss_intr>; + }; + + mailbox0_cluster1: mailbox@31f81000 { + compatible = "ti,am654-mailbox"; + reg = <0x00 0x31f81000 0x00 0x200>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + interrupt-parent = <&main_navss_intr>; + }; + + mailbox0_cluster2: mailbox@31f82000 { + compatible = "ti,am654-mailbox"; + reg = <0x00 0x31f82000 0x00 0x200>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + interrupt-parent = <&main_navss_intr>; + }; + + mailbox0_cluster3: mailbox@31f83000 { + compatible = "ti,am654-mailbox"; + reg = <0x00 0x31f83000 0x00 0x200>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + interrupt-parent = <&main_navss_intr>; + }; + + mailbox0_cluster4: mailbox@31f84000 { + compatible = "ti,am654-mailbox"; + reg = <0x00 0x31f84000 0x00 0x200>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + interrupt-parent = <&main_navss_intr>; + }; + + mailbox0_cluster5: mailbox@31f85000 { + compatible = "ti,am654-mailbox"; + reg = <0x00 0x31f85000 0x00 0x200>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + interrupt-parent = <&main_navss_intr>; + }; + + mailbox0_cluster6: mailbox@31f86000 { + compatible = "ti,am654-mailbox"; + reg = <0x00 0x31f86000 0x00 0x200>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + interrupt-parent = <&main_navss_intr>; + }; + + mailbox0_cluster7: mailbox@31f87000 { + compatible = "ti,am654-mailbox"; + reg = <0x00 0x31f87000 0x00 0x200>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + interrupt-parent = <&main_navss_intr>; + }; + + mailbox0_cluster8: mailbox@31f88000 { + compatible = "ti,am654-mailbox"; + reg = <0x00 0x31f88000 0x00 0x200>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + interrupt-parent = <&main_navss_intr>; + }; + + mailbox0_cluster9: mailbox@31f89000 { + compatible = "ti,am654-mailbox"; + reg = <0x00 0x31f89000 0x00 0x200>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + interrupt-parent = <&main_navss_intr>; + }; + + mailbox0_cluster10: mailbox@31f8a000 { + compatible = "ti,am654-mailbox"; + reg = <0x00 0x31f8a000 0x00 0x200>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + interrupt-parent = <&main_navss_intr>; + }; + + mailbox0_cluster11: mailbox@31f8b000 { + compatible = "ti,am654-mailbox"; + reg = <0x00 0x31f8b000 0x00 0x200>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + interrupt-parent = <&main_navss_intr>; + }; + + main_ringacc: ringacc@3c000000 { + compatible = "ti,am654-navss-ringacc"; + reg = <0x0 0x3c000000 0x0 0x400000>, + <0x0 0x38000000 0x0 0x400000>, + <0x0 0x31120000 0x0 0x100>, + <0x0 0x33000000 0x0 0x40000>; + reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target"; + ti,num-rings = <1024>; + ti,sci-rm-range-gp-rings = <0x1>; /* GP ring range */ + ti,sci = <&dmsc>; + ti,sci-dev-id = <211>; + msi-parent = <&main_udmass_inta>; + }; + + main_udmap: dma-controller@31150000 { + compatible = "ti,j721e-navss-main-udmap"; + reg = <0x0 0x31150000 0x0 0x100>, + <0x0 0x34000000 0x0 0x100000>, + <0x0 0x35000000 0x0 0x100000>; + reg-names = "gcfg", "rchanrt", "tchanrt"; + msi-parent = <&main_udmass_inta>; + #dma-cells = <1>; + + ti,sci = <&dmsc>; + ti,sci-dev-id = <212>; + ti,ringacc = <&main_ringacc>; + + ti,sci-rm-range-tchan = <0x0d>, /* TX_CHAN */ + <0x0f>, /* TX_HCHAN */ + <0x10>; /* TX_UHCHAN */ + ti,sci-rm-range-rchan = <0x0a>, /* RX_CHAN */ + <0x0b>, /* RX_HCHAN */ + <0x0c>; /* RX_UHCHAN */ + ti,sci-rm-range-rflow = <0x00>; /* GP RFLOW */ + }; }; main_pmx0: pinmux@11c000 { @@ -119,7 +273,7 @@ interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <48000000>; current-speed = <115200>; - power-domains = <&k3_pds 146>; + power-domains = <&k3_pds 146 TI_SCI_PD_EXCLUSIVE>; clocks = <&k3_clks 146 0>; clock-names = "fclk"; }; @@ -132,7 +286,7 @@ interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <48000000>; current-speed = <115200>; - power-domains = <&k3_pds 278>; + power-domains = <&k3_pds 278 TI_SCI_PD_EXCLUSIVE>; clocks = <&k3_clks 278 0>; clock-names = "fclk"; }; @@ -145,7 +299,7 @@ interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <48000000>; current-speed = <115200>; - power-domains = <&k3_pds 279>; + power-domains = <&k3_pds 279 TI_SCI_PD_EXCLUSIVE>; clocks = <&k3_clks 279 0>; clock-names = "fclk"; }; @@ -158,7 +312,7 @@ interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <48000000>; current-speed = <115200>; - power-domains = <&k3_pds 280>; + power-domains = <&k3_pds 280 TI_SCI_PD_EXCLUSIVE>; clocks = <&k3_clks 280 0>; clock-names = "fclk"; }; @@ -171,7 +325,7 @@ interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <48000000>; current-speed = <115200>; - power-domains = <&k3_pds 281>; + power-domains = <&k3_pds 281 TI_SCI_PD_EXCLUSIVE>; clocks = <&k3_clks 281 0>; clock-names = "fclk"; }; @@ -184,7 +338,7 @@ interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <48000000>; current-speed = <115200>; - power-domains = <&k3_pds 282>; + power-domains = <&k3_pds 282 TI_SCI_PD_EXCLUSIVE>; clocks = <&k3_clks 282 0>; clock-names = "fclk"; }; @@ -197,7 +351,7 @@ interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <48000000>; current-speed = <115200>; - power-domains = <&k3_pds 283>; + power-domains = <&k3_pds 283 TI_SCI_PD_EXCLUSIVE>; clocks = <&k3_clks 283 0>; clock-names = "fclk"; }; @@ -210,7 +364,7 @@ interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <48000000>; current-speed = <115200>; - power-domains = <&k3_pds 284>; + power-domains = <&k3_pds 284 TI_SCI_PD_EXCLUSIVE>; clocks = <&k3_clks 284 0>; clock-names = "fclk"; }; @@ -223,7 +377,7 @@ interrupts = <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <48000000>; current-speed = <115200>; - power-domains = <&k3_pds 285>; + power-domains = <&k3_pds 285 TI_SCI_PD_EXCLUSIVE>; clocks = <&k3_clks 285 0>; clock-names = "fclk"; }; @@ -236,8 +390,577 @@ interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <48000000>; current-speed = <115200>; - power-domains = <&k3_pds 286>; + power-domains = <&k3_pds 286 TI_SCI_PD_EXCLUSIVE>; clocks = <&k3_clks 286 0>; clock-names = "fclk"; }; + + main_gpio0: gpio@600000 { + compatible = "ti,j721e-gpio", "ti,keystone-gpio"; + reg = <0x0 0x00600000 0x0 0x100>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&main_gpio_intr>; + interrupts = <105 0>, <105 1>, <105 2>, <105 3>, + <105 4>, <105 5>, <105 6>, <105 7>; + interrupt-controller; + #interrupt-cells = <2>; + ti,ngpio = <128>; + ti,davinci-gpio-unbanked = <0>; + power-domains = <&k3_pds 105 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 105 0>; + clock-names = "gpio"; + }; + + main_gpio1: gpio@601000 { + compatible = "ti,j721e-gpio", "ti,keystone-gpio"; + reg = <0x0 0x00601000 0x0 0x100>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&main_gpio_intr>; + interrupts = <106 0>, <106 1>, <106 2>; + interrupt-controller; + #interrupt-cells = <2>; + ti,ngpio = <36>; + ti,davinci-gpio-unbanked = <0>; + power-domains = <&k3_pds 106 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 106 0>; + clock-names = "gpio"; + }; + + main_gpio2: gpio@610000 { + compatible = "ti,j721e-gpio", "ti,keystone-gpio"; + reg = <0x0 0x00610000 0x0 0x100>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&main_gpio_intr>; + interrupts = <107 0>, <107 1>, <107 2>, <107 3>, + <107 4>, <107 5>, <107 6>, <107 7>; + interrupt-controller; + #interrupt-cells = <2>; + ti,ngpio = <128>; + ti,davinci-gpio-unbanked = <0>; + power-domains = <&k3_pds 107 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 107 0>; + clock-names = "gpio"; + }; + + main_gpio3: gpio@611000 { + compatible = "ti,j721e-gpio", "ti,keystone-gpio"; + reg = <0x0 0x00611000 0x0 0x100>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&main_gpio_intr>; + interrupts = <108 0>, <108 1>, <108 2>; + interrupt-controller; + #interrupt-cells = <2>; + ti,ngpio = <36>; + ti,davinci-gpio-unbanked = <0>; + power-domains = <&k3_pds 108 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 108 0>; + clock-names = "gpio"; + }; + + main_gpio4: gpio@620000 { + compatible = "ti,j721e-gpio", "ti,keystone-gpio"; + reg = <0x0 0x00620000 0x0 0x100>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&main_gpio_intr>; + interrupts = <109 0>, <109 1>, <109 2>, <109 3>, + <109 4>, <109 5>, <109 6>, <109 7>; + interrupt-controller; + #interrupt-cells = <2>; + ti,ngpio = <128>; + ti,davinci-gpio-unbanked = <0>; + power-domains = <&k3_pds 109 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 109 0>; + clock-names = "gpio"; + }; + + main_gpio5: gpio@621000 { + compatible = "ti,j721e-gpio", "ti,keystone-gpio"; + reg = <0x0 0x00621000 0x0 0x100>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&main_gpio_intr>; + interrupts = <110 0>, <110 1>, <110 2>; + interrupt-controller; + #interrupt-cells = <2>; + ti,ngpio = <36>; + ti,davinci-gpio-unbanked = <0>; + power-domains = <&k3_pds 110 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 110 0>; + clock-names = "gpio"; + }; + + main_gpio6: gpio@630000 { + compatible = "ti,j721e-gpio", "ti,keystone-gpio"; + reg = <0x0 0x00630000 0x0 0x100>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&main_gpio_intr>; + interrupts = <111 0>, <111 1>, <111 2>, <111 3>, + <111 4>, <111 5>, <111 6>, <111 7>; + interrupt-controller; + #interrupt-cells = <2>; + ti,ngpio = <128>; + ti,davinci-gpio-unbanked = <0>; + power-domains = <&k3_pds 111 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 111 0>; + clock-names = "gpio"; + }; + + main_gpio7: gpio@631000 { + compatible = "ti,j721e-gpio", "ti,keystone-gpio"; + reg = <0x0 0x00631000 0x0 0x100>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&main_gpio_intr>; + interrupts = <112 0>, <112 1>, <112 2>; + interrupt-controller; + #interrupt-cells = <2>; + ti,ngpio = <36>; + ti,davinci-gpio-unbanked = <0>; + power-domains = <&k3_pds 112 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 112 0>; + clock-names = "gpio"; + }; + + main_sdhci0: sdhci@4f80000 { + compatible = "ti,j721e-sdhci-8bit"; + reg = <0x0 0x4f80000 0x0 0x1000>, <0x0 0x4f88000 0x0 0x400>; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&k3_pds 91 TI_SCI_PD_EXCLUSIVE>; + clock-names = "clk_xin", "clk_ahb"; + clocks = <&k3_clks 91 1>, <&k3_clks 91 0>; + assigned-clocks = <&k3_clks 91 1>; + assigned-clock-parents = <&k3_clks 91 2>; + bus-width = <8>; + mmc-hs400-1_8v; + mmc-ddr-1_8v; + ti,otap-del-sel = <0x2>; + ti,trm-icp = <0x8>; + ti,strobe-sel = <0x77>; + dma-coherent; + }; + + main_sdhci1: sdhci@4fb0000 { + compatible = "ti,j721e-sdhci-4bit"; + reg = <0x0 0x04fb0000 0x0 0x1000>, <0x0 0x4fb8000 0x0 0x400>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&k3_pds 92 TI_SCI_PD_EXCLUSIVE>; + clock-names = "clk_xin", "clk_ahb"; + clocks = <&k3_clks 92 0>, <&k3_clks 92 5>; + assigned-clocks = <&k3_clks 92 0>; + assigned-clock-parents = <&k3_clks 92 1>; + ti,otap-del-sel = <0x2>; + ti,trm-icp = <0x8>; + ti,clkbuf-sel = <0x7>; + dma-coherent; + no-1-8-v; + }; + + main_sdhci2: sdhci@4f98000 { + compatible = "ti,j721e-sdhci-4bit"; + reg = <0x0 0x4f98000 0x0 0x1000>, <0x0 0x4f90000 0x0 0x400>; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&k3_pds 93 TI_SCI_PD_EXCLUSIVE>; + clock-names = "clk_xin", "clk_ahb"; + clocks = <&k3_clks 93 0>, <&k3_clks 93 5>; + assigned-clocks = <&k3_clks 93 0>; + assigned-clock-parents = <&k3_clks 93 1>; + ti,otap-del-sel = <0x2>; + ti,trm-icp = <0x8>; + ti,clkbuf-sel = <0x7>; + dma-coherent; + no-1-8-v; + }; + + usbss0: cdns_usb@4104000 { + compatible = "ti,j721e-usb"; + reg = <0x00 0x4104000 0x00 0x100>; + dma-coherent; + power-domains = <&k3_pds 288 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 288 15>, <&k3_clks 288 3>; + clock-names = "ref", "lpm"; + assigned-clocks = <&k3_clks 288 15>; /* USB2_REFCLK */ + assigned-clock-parents = <&k3_clks 288 16>; /* HFOSC0 */ + #address-cells = <2>; + #size-cells = <2>; + ranges; + + usb0: usb@6000000 { + compatible = "cdns,usb3"; + reg = <0x00 0x6000000 0x00 0x10000>, + <0x00 0x6010000 0x00 0x10000>, + <0x00 0x6020000 0x00 0x10000>; + reg-names = "otg", "xhci", "dev"; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, /* irq.0 */ + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, /* irq.6 */ + <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; /* otgirq.0 */ + interrupt-names = "host", + "peripheral", + "otg"; + maximum-speed = "super-speed"; + dr_mode = "otg"; + }; + }; + + usbss1: cdns_usb@4114000 { + compatible = "ti,j721e-usb"; + reg = <0x00 0x4114000 0x00 0x100>; + dma-coherent; + power-domains = <&k3_pds 289 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 289 15>, <&k3_clks 289 3>; + clock-names = "ref", "lpm"; + assigned-clocks = <&k3_clks 289 15>; /* USB2_REFCLK */ + assigned-clock-parents = <&k3_clks 289 16>; /* HFOSC0 */ + #address-cells = <2>; + #size-cells = <2>; + ranges; + + usb1: usb@6400000 { + compatible = "cdns,usb3"; + reg = <0x00 0x6400000 0x00 0x10000>, + <0x00 0x6410000 0x00 0x10000>, + <0x00 0x6420000 0x00 0x10000>; + reg-names = "otg", "xhci", "dev"; + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, /* irq.0 */ + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, /* irq.6 */ + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; /* otgirq.0 */ + interrupt-names = "host", + "peripheral", + "otg"; + maximum-speed = "super-speed"; + dr_mode = "otg"; + }; + }; + + main_i2c0: i2c@2000000 { + compatible = "ti,j721e-i2c", "ti,omap4-i2c"; + reg = <0x0 0x2000000 0x0 0x100>; + interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "fck"; + clocks = <&k3_clks 187 0>; + power-domains = <&k3_pds 187 TI_SCI_PD_SHARED>; + }; + + main_i2c1: i2c@2010000 { + compatible = "ti,j721e-i2c", "ti,omap4-i2c"; + reg = <0x0 0x2010000 0x0 0x100>; + interrupts = <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "fck"; + clocks = <&k3_clks 188 0>; + power-domains = <&k3_pds 188 TI_SCI_PD_EXCLUSIVE>; + }; + + main_i2c2: i2c@2020000 { + compatible = "ti,j721e-i2c", "ti,omap4-i2c"; + reg = <0x0 0x2020000 0x0 0x100>; + interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "fck"; + clocks = <&k3_clks 189 0>; + power-domains = <&k3_pds 189 TI_SCI_PD_EXCLUSIVE>; + }; + + main_i2c3: i2c@2030000 { + compatible = "ti,j721e-i2c", "ti,omap4-i2c"; + reg = <0x0 0x2030000 0x0 0x100>; + interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "fck"; + clocks = <&k3_clks 190 0>; + power-domains = <&k3_pds 190 TI_SCI_PD_EXCLUSIVE>; + }; + + main_i2c4: i2c@2040000 { + compatible = "ti,j721e-i2c", "ti,omap4-i2c"; + reg = <0x0 0x2040000 0x0 0x100>; + interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "fck"; + clocks = <&k3_clks 191 0>; + power-domains = <&k3_pds 191 TI_SCI_PD_EXCLUSIVE>; + }; + + main_i2c5: i2c@2050000 { + compatible = "ti,j721e-i2c", "ti,omap4-i2c"; + reg = <0x0 0x2050000 0x0 0x100>; + interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "fck"; + clocks = <&k3_clks 192 0>; + power-domains = <&k3_pds 192 TI_SCI_PD_EXCLUSIVE>; + }; + + main_i2c6: i2c@2060000 { + compatible = "ti,j721e-i2c", "ti,omap4-i2c"; + reg = <0x0 0x2060000 0x0 0x100>; + interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "fck"; + clocks = <&k3_clks 193 0>; + power-domains = <&k3_pds 193 TI_SCI_PD_EXCLUSIVE>; + }; + + ufs_wrapper: ufs-wrapper@4e80000 { + compatible = "ti,j721e-ufs"; + reg = <0x0 0x4e80000 0x0 0x100>; + power-domains = <&k3_pds 277 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 277 1>; + assigned-clocks = <&k3_clks 277 1>; + assigned-clock-parents = <&k3_clks 277 4>; + ranges; + #address-cells = <2>; + #size-cells = <2>; + + ufs@4e84000 { + compatible = "cdns,ufshc-m31-16nm", "jedec,ufs-2.0"; + reg = <0x0 0x4e84000 0x0 0x10000>; + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + freq-table-hz = <250000000 250000000>, <19200000 19200000>, <19200000 19200000>; + clocks = <&k3_clks 277 0>, <&k3_clks 277 1>, <&k3_clks 277 1>; + clock-names = "core_clk", "phy_clk", "ref_clk"; + dma-coherent; + }; + }; + + mcasp0: mcasp@2b00000 { + compatible = "ti,am33xx-mcasp-audio"; + reg = <0x0 0x02b00000 0x0 0x2000>, + <0x0 0x02b08000 0x0 0x1000>; + reg-names = "mpu","dat"; + interrupts = <GIC_SPI 544 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 545 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tx", "rx"; + + dmas = <&main_udmap 0xc400>, <&main_udmap 0x4400>; + dma-names = "tx", "rx"; + + clocks = <&k3_clks 174 1>; + clock-names = "fck"; + power-domains = <&k3_pds 174 TI_SCI_PD_EXCLUSIVE>; + + status = "disabled"; + }; + + mcasp1: mcasp@2b10000 { + compatible = "ti,am33xx-mcasp-audio"; + reg = <0x0 0x02b10000 0x0 0x2000>, + <0x0 0x02b18000 0x0 0x1000>; + reg-names = "mpu","dat"; + interrupts = <GIC_SPI 546 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 547 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tx", "rx"; + + dmas = <&main_udmap 0xc401>, <&main_udmap 0x4401>; + dma-names = "tx", "rx"; + + clocks = <&k3_clks 175 1>; + clock-names = "fck"; + power-domains = <&k3_pds 175 TI_SCI_PD_EXCLUSIVE>; + + status = "disabled"; + }; + + mcasp2: mcasp@2b20000 { + compatible = "ti,am33xx-mcasp-audio"; + reg = <0x0 0x02b20000 0x0 0x2000>, + <0x0 0x02b28000 0x0 0x1000>; + reg-names = "mpu","dat"; + interrupts = <GIC_SPI 548 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 549 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tx", "rx"; + + dmas = <&main_udmap 0xc402>, <&main_udmap 0x4402>; + dma-names = "tx", "rx"; + + clocks = <&k3_clks 176 1>; + clock-names = "fck"; + power-domains = <&k3_pds 176 TI_SCI_PD_EXCLUSIVE>; + + status = "disabled"; + }; + + mcasp3: mcasp@2b30000 { + compatible = "ti,am33xx-mcasp-audio"; + reg = <0x0 0x02b30000 0x0 0x2000>, + <0x0 0x02b38000 0x0 0x1000>; + reg-names = "mpu","dat"; + interrupts = <GIC_SPI 550 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 551 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tx", "rx"; + + dmas = <&main_udmap 0xc500>, <&main_udmap 0x4500>; + dma-names = "tx", "rx"; + + clocks = <&k3_clks 177 1>; + clock-names = "fck"; + power-domains = <&k3_pds 177 TI_SCI_PD_EXCLUSIVE>; + + status = "disabled"; + }; + + mcasp4: mcasp@2b40000 { + compatible = "ti,am33xx-mcasp-audio"; + reg = <0x0 0x02b40000 0x0 0x2000>, + <0x0 0x02b48000 0x0 0x1000>; + reg-names = "mpu","dat"; + interrupts = <GIC_SPI 552 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 553 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tx", "rx"; + + dmas = <&main_udmap 0xc501>, <&main_udmap 0x4501>; + dma-names = "tx", "rx"; + + clocks = <&k3_clks 178 1>; + clock-names = "fck"; + power-domains = <&k3_pds 178 TI_SCI_PD_EXCLUSIVE>; + + status = "disabled"; + }; + + mcasp5: mcasp@2b50000 { + compatible = "ti,am33xx-mcasp-audio"; + reg = <0x0 0x02b50000 0x0 0x2000>, + <0x0 0x02b58000 0x0 0x1000>; + reg-names = "mpu","dat"; + interrupts = <GIC_SPI 554 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 555 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tx", "rx"; + + dmas = <&main_udmap 0xc502>, <&main_udmap 0x4502>; + dma-names = "tx", "rx"; + + clocks = <&k3_clks 179 1>; + clock-names = "fck"; + power-domains = <&k3_pds 179 TI_SCI_PD_EXCLUSIVE>; + + status = "disabled"; + }; + + mcasp6: mcasp@2b60000 { + compatible = "ti,am33xx-mcasp-audio"; + reg = <0x0 0x02b60000 0x0 0x2000>, + <0x0 0x02b68000 0x0 0x1000>; + reg-names = "mpu","dat"; + interrupts = <GIC_SPI 556 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 557 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tx", "rx"; + + dmas = <&main_udmap 0xc503>, <&main_udmap 0x4503>; + dma-names = "tx", "rx"; + + clocks = <&k3_clks 180 1>; + clock-names = "fck"; + power-domains = <&k3_pds 180 TI_SCI_PD_EXCLUSIVE>; + + status = "disabled"; + }; + + mcasp7: mcasp@2b70000 { + compatible = "ti,am33xx-mcasp-audio"; + reg = <0x0 0x02b70000 0x0 0x2000>, + <0x0 0x02b78000 0x0 0x1000>; + reg-names = "mpu","dat"; + interrupts = <GIC_SPI 558 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 559 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tx", "rx"; + + dmas = <&main_udmap 0xc504>, <&main_udmap 0x4504>; + dma-names = "tx", "rx"; + + clocks = <&k3_clks 181 1>; + clock-names = "fck"; + power-domains = <&k3_pds 181 TI_SCI_PD_EXCLUSIVE>; + + status = "disabled"; + }; + + mcasp8: mcasp@2b80000 { + compatible = "ti,am33xx-mcasp-audio"; + reg = <0x0 0x02b80000 0x0 0x2000>, + <0x0 0x02b88000 0x0 0x1000>; + reg-names = "mpu","dat"; + interrupts = <GIC_SPI 560 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 561 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tx", "rx"; + + dmas = <&main_udmap 0xc505>, <&main_udmap 0x4505>; + dma-names = "tx", "rx"; + + clocks = <&k3_clks 182 1>; + clock-names = "fck"; + power-domains = <&k3_pds 182 TI_SCI_PD_EXCLUSIVE>; + + status = "disabled"; + }; + + mcasp9: mcasp@2b90000 { + compatible = "ti,am33xx-mcasp-audio"; + reg = <0x0 0x02b90000 0x0 0x2000>, + <0x0 0x02b98000 0x0 0x1000>; + reg-names = "mpu","dat"; + interrupts = <GIC_SPI 562 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 563 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tx", "rx"; + + dmas = <&main_udmap 0xc506>, <&main_udmap 0x4506>; + dma-names = "tx", "rx"; + + clocks = <&k3_clks 183 1>; + clock-names = "fck"; + power-domains = <&k3_pds 183 TI_SCI_PD_EXCLUSIVE>; + + status = "disabled"; + }; + + mcasp10: mcasp@2ba0000 { + compatible = "ti,am33xx-mcasp-audio"; + reg = <0x0 0x02ba0000 0x0 0x2000>, + <0x0 0x02ba8000 0x0 0x1000>; + reg-names = "mpu","dat"; + interrupts = <GIC_SPI 564 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 565 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tx", "rx"; + + dmas = <&main_udmap 0xc507>, <&main_udmap 0x4507>; + dma-names = "tx", "rx"; + + clocks = <&k3_clks 184 1>; + clock-names = "fck"; + power-domains = <&k3_pds 184 TI_SCI_PD_EXCLUSIVE>; + + status = "disabled"; + }; + + mcasp11: mcasp@2bb0000 { + compatible = "ti,am33xx-mcasp-audio"; + reg = <0x0 0x02bb0000 0x0 0x2000>, + <0x0 0x02bb8000 0x0 0x1000>; + reg-names = "mpu","dat"; + interrupts = <GIC_SPI 566 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 567 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tx", "rx"; + + dmas = <&main_udmap 0xc508>, <&main_udmap 0x4508>; + dma-names = "tx", "rx"; + + clocks = <&k3_clks 185 1>; + clock-names = "fck"; + power-domains = <&k3_pds 185 TI_SCI_PD_EXCLUSIVE>; + + status = "disabled"; + }; }; diff --git a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi index 07b58eeebceb..16c874bfd49a 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi @@ -20,7 +20,7 @@ k3_pds: power-controller { compatible = "ti,sci-pm-domain"; - #power-domain-cells = <1>; + #power-domain-cells = <2>; }; k3_clks: clocks { @@ -59,7 +59,7 @@ interrupts = <GIC_SPI 897 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <48000000>; current-speed = <115200>; - power-domains = <&k3_pds 287>; + power-domains = <&k3_pds 287 TI_SCI_PD_EXCLUSIVE>; clocks = <&k3_clks 287 0>; clock-names = "fclk"; }; @@ -72,7 +72,7 @@ interrupts = <GIC_SPI 846 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <96000000>; current-speed = <115200>; - power-domains = <&k3_pds 149>; + power-domains = <&k3_pds 149 TI_SCI_PD_EXCLUSIVE>; clocks = <&k3_clks 149 0>; clock-names = "fclk"; }; @@ -87,4 +87,187 @@ ti,sci-dst-id = <14>; ti,sci-rm-range-girq = <0x5>; }; + + wkup_gpio0: gpio@42110000 { + compatible = "ti,j721e-gpio", "ti,keystone-gpio"; + reg = <0x0 0x42110000 0x0 0x100>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&wkup_gpio_intr>; + interrupts = <113 0>, <113 1>, <113 2>, + <113 3>, <113 4>, <113 5>; + interrupt-controller; + #interrupt-cells = <2>; + ti,ngpio = <84>; + ti,davinci-gpio-unbanked = <0>; + power-domains = <&k3_pds 113 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 113 0>; + clock-names = "gpio"; + }; + + wkup_gpio1: gpio@42100000 { + compatible = "ti,j721e-gpio", "ti,keystone-gpio"; + reg = <0x0 0x42100000 0x0 0x100>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&wkup_gpio_intr>; + interrupts = <114 0>, <114 1>, <114 2>, + <114 3>, <114 4>, <114 5>; + interrupt-controller; + #interrupt-cells = <2>; + ti,ngpio = <84>; + ti,davinci-gpio-unbanked = <0>; + power-domains = <&k3_pds 114 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 114 0>; + clock-names = "gpio"; + }; + + mcu_i2c0: i2c@40b00000 { + compatible = "ti,j721e-i2c", "ti,omap4-i2c"; + reg = <0x0 0x40b00000 0x0 0x100>; + interrupts = <GIC_SPI 852 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "fck"; + clocks = <&k3_clks 194 0>; + power-domains = <&k3_pds 194 TI_SCI_PD_EXCLUSIVE>; + }; + + mcu_i2c1: i2c@40b10000 { + compatible = "ti,j721e-i2c", "ti,omap4-i2c"; + reg = <0x0 0x40b10000 0x0 0x100>; + interrupts = <GIC_SPI 853 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "fck"; + clocks = <&k3_clks 195 0>; + power-domains = <&k3_pds 195 TI_SCI_PD_EXCLUSIVE>; + }; + + wkup_i2c0: i2c@42120000 { + compatible = "ti,j721e-i2c", "ti,omap4-i2c"; + reg = <0x0 0x42120000 0x0 0x100>; + interrupts = <GIC_SPI 896 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "fck"; + clocks = <&k3_clks 197 0>; + power-domains = <&k3_pds 197 TI_SCI_PD_SHARED>; + }; + + fss: fss@47000000 { + compatible = "simple-bus"; + reg = <0x0 0x47000000 0x0 0x100>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + ospi0: spi@47040000 { + compatible = "ti,am654-ospi"; + reg = <0x0 0x47040000 0x0 0x100>, + <0x5 0x00000000 0x1 0x0000000>; + interrupts = <GIC_SPI 840 IRQ_TYPE_LEVEL_HIGH>; + cdns,fifo-depth = <256>; + cdns,fifo-width = <4>; + cdns,trigger-address = <0x0>; + clocks = <&k3_clks 103 0>; + assigned-clocks = <&k3_clks 103 0>; + assigned-clock-parents = <&k3_clks 103 2>; + assigned-clock-rates = <166666666>; + power-domains = <&k3_pds 103 TI_SCI_PD_EXCLUSIVE>; + #address-cells = <1>; + #size-cells = <0>; + }; + + ospi1: spi@47050000 { + compatible = "ti,am654-ospi"; + reg = <0x0 0x47050000 0x0 0x100>, + <0x7 0x00000000 0x1 0x00000000>; + interrupts = <GIC_SPI 841 IRQ_TYPE_LEVEL_HIGH>; + cdns,fifo-depth = <256>; + cdns,fifo-width = <4>; + cdns,trigger-address = <0x0>; + clocks = <&k3_clks 104 0>; + power-domains = <&k3_pds 104 TI_SCI_PD_EXCLUSIVE>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + tscadc0: tscadc@40200000 { + compatible = "ti,am3359-tscadc"; + reg = <0x0 0x40200000 0x0 0x1000>; + interrupts = <GIC_SPI 860 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&k3_pds 0 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 0 1>; + assigned-clocks = <&k3_clks 0 3>; + assigned-clock-rates = <60000000>; + clock-names = "adc_tsc_fck"; + + adc { + #io-channel-cells = <1>; + compatible = "ti,am3359-adc"; + }; + }; + + tscadc1: tscadc@40210000 { + compatible = "ti,am3359-tscadc"; + reg = <0x0 0x40210000 0x0 0x1000>; + interrupts = <GIC_SPI 861 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&k3_pds 1 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 1 1>; + assigned-clocks = <&k3_clks 1 3>; + assigned-clock-rates = <60000000>; + clock-names = "adc_tsc_fck"; + + adc { + #io-channel-cells = <1>; + compatible = "ti,am3359-adc"; + }; + }; + + mcu_navss { + compatible = "simple-mfd"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + dma-coherent; + dma-ranges; + + ti,sci-dev-id = <232>; + + mcu_ringacc: ringacc@2b800000 { + compatible = "ti,am654-navss-ringacc"; + reg = <0x0 0x2b800000 0x0 0x400000>, + <0x0 0x2b000000 0x0 0x400000>, + <0x0 0x28590000 0x0 0x100>, + <0x0 0x2a500000 0x0 0x40000>; + reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target"; + ti,num-rings = <286>; + ti,sci-rm-range-gp-rings = <0x1>; /* GP ring range */ + ti,sci = <&dmsc>; + ti,sci-dev-id = <235>; + msi-parent = <&main_udmass_inta>; + }; + + mcu_udmap: dma-controller@285c0000 { + compatible = "ti,j721e-navss-mcu-udmap"; + reg = <0x0 0x285c0000 0x0 0x100>, + <0x0 0x2a800000 0x0 0x40000>, + <0x0 0x2aa00000 0x0 0x40000>; + reg-names = "gcfg", "rchanrt", "tchanrt"; + msi-parent = <&main_udmass_inta>; + #dma-cells = <1>; + + ti,sci = <&dmsc>; + ti,sci-dev-id = <236>; + ti,ringacc = <&mcu_ringacc>; + + ti,sci-rm-range-tchan = <0x0d>, /* TX_CHAN */ + <0x0f>; /* TX_HCHAN */ + ti,sci-rm-range-rchan = <0x0a>, /* RX_CHAN */ + <0x0b>; /* RX_HCHAN */ + ti,sci-rm-range-rflow = <0x00>; /* GP RFLOW */ + }; + }; }; diff --git a/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi index 1884fc70148f..7680109ca60a 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi @@ -27,3 +27,48 @@ }; }; }; + +&wkup_pmx0 { + wkup_i2c0_pins_default: wkup_i2c0_pins_default { + pinctrl-single,pins = < + J721E_WKUP_IOPAD(0xf8, PIN_INPUT_PULLUP, 0) /* (J25) WKUP_I2C0_SCL */ + J721E_WKUP_IOPAD(0xfc, PIN_INPUT_PULLUP, 0) /* (H24) WKUP_I2C0_SDA */ + >; + }; + + mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-pins-default { + pinctrl-single,pins = < + J721E_WKUP_IOPAD(0x0000, PIN_OUTPUT, 0) /* MCU_OSPI0_CLK */ + J721E_WKUP_IOPAD(0x0008, PIN_INPUT, 0) /* MCU_OSPI0_DQS */ + J721E_WKUP_IOPAD(0x000c, PIN_INPUT, 0) /* MCU_OSPI0_D0 */ + J721E_WKUP_IOPAD(0x0010, PIN_INPUT, 0) /* MCU_OSPI0_D1 */ + J721E_WKUP_IOPAD(0x0014, PIN_INPUT, 0) /* MCU_OSPI0_D2 */ + J721E_WKUP_IOPAD(0x0018, PIN_INPUT, 0) /* MCU_OSPI0_D3 */ + J721E_WKUP_IOPAD(0x001c, PIN_INPUT, 0) /* MCU_OSPI0_D4 */ + J721E_WKUP_IOPAD(0x0020, PIN_INPUT, 0) /* MCU_OSPI0_D5 */ + J721E_WKUP_IOPAD(0x0024, PIN_INPUT, 0) /* MCU_OSPI0_D6 */ + J721E_WKUP_IOPAD(0x0028, PIN_INPUT, 0) /* MCU_OSPI0_D7 */ + J721E_WKUP_IOPAD(0x002c, PIN_OUTPUT, 0) /* MCU_OSPI0_CSn0 */ + >; + }; +}; + +&ospi0 { + pinctrl-names = "default"; + pinctrl-0 = <&mcu_fss0_ospi0_pins_default>; + + flash@0{ + compatible = "jedec,spi-nor"; + reg = <0x0>; + spi-tx-bus-width = <1>; + spi-rx-bus-width = <8>; + spi-max-frequency = <40000000>; + cdns,tshsl-ns = <60>; + cdns,tsd2d-ns = <60>; + cdns,tchsh-ns = <60>; + cdns,tslch-ns = <60>; + cdns,read-delay = <0>; + #address-cells = <1>; + #size-cells = <1>; + }; +}; diff --git a/arch/arm64/boot/dts/ti/k3-j721e.dtsi b/arch/arm64/boot/dts/ti/k3-j721e.dtsi index f8dd74b17bfb..027bd1febafa 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721e.dtsi @@ -8,6 +8,7 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/pinctrl/k3.h> +#include <dt-bindings/soc/ti,sci_pm_domain.h> / { model = "Texas Instruments K3 J721E SoC"; @@ -126,8 +127,10 @@ <0x00 0x00600000 0x00 0x00600000 0x00 0x00031100>, /* GPIO */ <0x00 0x00900000 0x00 0x00900000 0x00 0x00012000>, /* serdes */ <0x00 0x00A40000 0x00 0x00A40000 0x00 0x00000800>, /* timesync router */ + <0x00 0x06000000 0x00 0x06000000 0x00 0x00400000>, /* USBSS0 */ + <0x00 0x06400000 0x00 0x06400000 0x00 0x00400000>, /* USBSS1 */ <0x00 0x01000000 0x00 0x01000000 0x00 0x0af02400>, /* Most peripherals */ - <0x00 0x30800000 0x00 0x30800000 0x00 0x0bc00000>, /* MAIN NAVSS */ + <0x00 0x30000000 0x00 0x30000000 0x00 0x0c400000>, /* MAIN NAVSS */ <0x00 0x0d000000 0x00 0x0d000000 0x00 0x01000000>, /* PCIe Core*/ <0x00 0x10000000 0x00 0x10000000 0x00 0x10000000>, /* PCIe DAT */ <0x00 0x64800000 0x00 0x64800000 0x00 0x00800000>, /* C71 */ diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi new file mode 100644 index 000000000000..9868ca15dfc5 --- /dev/null +++ b/arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi @@ -0,0 +1,222 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Clock specification for Xilinx ZynqMP + * + * (C) Copyright 2017 - 2019, Xilinx, Inc. + * + * Michal Simek <michal.simek@xilinx.com> + */ + +#include <dt-bindings/clock/xlnx-zynqmp-clk.h> +/ { + pss_ref_clk: pss_ref_clk { + u-boot,dm-pre-reloc; + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <33333333>; + }; + + video_clk: video_clk { + u-boot,dm-pre-reloc; + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <27000000>; + }; + + pss_alt_ref_clk: pss_alt_ref_clk { + u-boot,dm-pre-reloc; + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + gt_crx_ref_clk: gt_crx_ref_clk { + u-boot,dm-pre-reloc; + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <108000000>; + }; + + aux_ref_clk: aux_ref_clk { + u-boot,dm-pre-reloc; + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <27000000>; + }; +}; + +&can0 { + clocks = <&zynqmp_clk CAN0_REF>, <&zynqmp_clk LPD_LSBUS>; +}; + +&can1 { + clocks = <&zynqmp_clk CAN1_REF>, <&zynqmp_clk LPD_LSBUS>; +}; + +&cpu0 { + clocks = <&zynqmp_clk ACPU>; +}; + +&fpd_dma_chan1 { + clocks = <&zynqmp_clk GDMA_REF>, <&zynqmp_clk LPD_LSBUS>; +}; + +&fpd_dma_chan2 { + clocks = <&zynqmp_clk GDMA_REF>, <&zynqmp_clk LPD_LSBUS>; +}; + +&fpd_dma_chan3 { + clocks = <&zynqmp_clk GDMA_REF>, <&zynqmp_clk LPD_LSBUS>; +}; + +&fpd_dma_chan4 { + clocks = <&zynqmp_clk GDMA_REF>, <&zynqmp_clk LPD_LSBUS>; +}; + +&fpd_dma_chan5 { + clocks = <&zynqmp_clk GDMA_REF>, <&zynqmp_clk LPD_LSBUS>; +}; + +&fpd_dma_chan6 { + clocks = <&zynqmp_clk GDMA_REF>, <&zynqmp_clk LPD_LSBUS>; +}; + +&fpd_dma_chan7 { + clocks = <&zynqmp_clk GDMA_REF>, <&zynqmp_clk LPD_LSBUS>; +}; + +&fpd_dma_chan8 { + clocks = <&zynqmp_clk GDMA_REF>, <&zynqmp_clk LPD_LSBUS>; +}; + +&lpd_dma_chan1 { + clocks = <&zynqmp_clk ADMA_REF>, <&zynqmp_clk LPD_LSBUS>; +}; + +&lpd_dma_chan2 { + clocks = <&zynqmp_clk ADMA_REF>, <&zynqmp_clk LPD_LSBUS>; +}; + +&lpd_dma_chan3 { + clocks = <&zynqmp_clk ADMA_REF>, <&zynqmp_clk LPD_LSBUS>; +}; + +&lpd_dma_chan4 { + clocks = <&zynqmp_clk ADMA_REF>, <&zynqmp_clk LPD_LSBUS>; +}; + +&lpd_dma_chan5 { + clocks = <&zynqmp_clk ADMA_REF>, <&zynqmp_clk LPD_LSBUS>; +}; + +&lpd_dma_chan6 { + clocks = <&zynqmp_clk ADMA_REF>, <&zynqmp_clk LPD_LSBUS>; +}; + +&lpd_dma_chan7 { + clocks = <&zynqmp_clk ADMA_REF>, <&zynqmp_clk LPD_LSBUS>; +}; + +&lpd_dma_chan8 { + clocks = <&zynqmp_clk ADMA_REF>, <&zynqmp_clk LPD_LSBUS>; +}; + +&gem0 { + clocks = <&zynqmp_clk LPD_LSBUS>, <&zynqmp_clk GEM0_REF>, + <&zynqmp_clk GEM0_TX>, <&zynqmp_clk GEM0_RX>, + <&zynqmp_clk GEM_TSU>; + clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk"; +}; + +&gem1 { + clocks = <&zynqmp_clk LPD_LSBUS>, <&zynqmp_clk GEM1_REF>, + <&zynqmp_clk GEM1_TX>, <&zynqmp_clk GEM1_RX>, + <&zynqmp_clk GEM_TSU>; + clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk"; +}; + +&gem2 { + clocks = <&zynqmp_clk LPD_LSBUS>, <&zynqmp_clk GEM2_REF>, + <&zynqmp_clk GEM2_TX>, <&zynqmp_clk GEM2_RX>, + <&zynqmp_clk GEM_TSU>; + clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk"; +}; + +&gem3 { + clocks = <&zynqmp_clk LPD_LSBUS>, <&zynqmp_clk GEM3_REF>, + <&zynqmp_clk GEM3_TX>, <&zynqmp_clk GEM3_RX>, + <&zynqmp_clk GEM_TSU>; + clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk"; +}; + +&gpio { + clocks = <&zynqmp_clk LPD_LSBUS>; +}; + +&i2c0 { + clocks = <&zynqmp_clk I2C0_REF>; +}; + +&i2c1 { + clocks = <&zynqmp_clk I2C1_REF>; +}; + +&pcie { + clocks = <&zynqmp_clk PCIE_REF>; +}; + +&sata { + clocks = <&zynqmp_clk SATA_REF>; +}; + +&sdhci0 { + clocks = <&zynqmp_clk SDIO0_REF>, <&zynqmp_clk LPD_LSBUS>; +}; + +&sdhci1 { + clocks = <&zynqmp_clk SDIO1_REF>, <&zynqmp_clk LPD_LSBUS>; +}; + +&spi0 { + clocks = <&zynqmp_clk SPI0_REF>, <&zynqmp_clk LPD_LSBUS>; +}; + +&spi1 { + clocks = <&zynqmp_clk SPI1_REF>, <&zynqmp_clk LPD_LSBUS>; +}; + +&ttc0 { + clocks = <&zynqmp_clk LPD_LSBUS>; +}; + +&ttc1 { + clocks = <&zynqmp_clk LPD_LSBUS>; +}; + +&ttc2 { + clocks = <&zynqmp_clk LPD_LSBUS>; +}; + +&ttc3 { + clocks = <&zynqmp_clk LPD_LSBUS>; +}; + +&uart0 { + clocks = <&zynqmp_clk UART0_REF>, <&zynqmp_clk LPD_LSBUS>; +}; + +&uart1 { + clocks = <&zynqmp_clk UART1_REF>, <&zynqmp_clk LPD_LSBUS>; +}; + +&usb0 { + clocks = <&zynqmp_clk USB0_BUS_REF>, <&zynqmp_clk USB3_DUAL_REF>; +}; + +&usb1 { + clocks = <&zynqmp_clk USB1_BUS_REF>, <&zynqmp_clk USB3_DUAL_REF>; +}; + +&watchdog0 { + clocks = <&zynqmp_clk WDT>; +}; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-clk.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp-clk.dtsi deleted file mode 100644 index 306ad2157c98..000000000000 --- a/arch/arm64/boot/dts/xilinx/zynqmp-clk.dtsi +++ /dev/null @@ -1,213 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Clock specification for Xilinx ZynqMP - * - * (C) Copyright 2015 - 2018, Xilinx, Inc. - * - * Michal Simek <michal.simek@xilinx.com> - */ - -/ { - clk100: clk100 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <100000000>; - }; - - clk125: clk125 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <125000000>; - }; - - clk200: clk200 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <200000000>; - }; - - clk250: clk250 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <250000000>; - }; - - clk300: clk300 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <300000000>; - }; - - clk600: clk600 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <600000000>; - }; - - dp_aclk: clock0 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <100000000>; - clock-accuracy = <100>; - }; - - dp_aud_clk: clock1 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <24576000>; - clock-accuracy = <100>; - }; - - dpdma_clk: dpdma-clk { - compatible = "fixed-clock"; - #clock-cells = <0x0>; - clock-frequency = <533000000>; - }; - - drm_clock: drm-clock { - compatible = "fixed-clock"; - #clock-cells = <0x0>; - clock-frequency = <262750000>; - clock-accuracy = <0x64>; - }; -}; - -&can0 { - clocks = <&clk100 &clk100>; -}; - -&can1 { - clocks = <&clk100 &clk100>; -}; - -&fpd_dma_chan1 { - clocks = <&clk600>, <&clk100>; -}; - -&fpd_dma_chan2 { - clocks = <&clk600>, <&clk100>; -}; - -&fpd_dma_chan3 { - clocks = <&clk600>, <&clk100>; -}; - -&fpd_dma_chan4 { - clocks = <&clk600>, <&clk100>; -}; - -&fpd_dma_chan5 { - clocks = <&clk600>, <&clk100>; -}; - -&fpd_dma_chan6 { - clocks = <&clk600>, <&clk100>; -}; - -&fpd_dma_chan7 { - clocks = <&clk600>, <&clk100>; -}; - -&fpd_dma_chan8 { - clocks = <&clk600>, <&clk100>; -}; - -&lpd_dma_chan1 { - clocks = <&clk600>, <&clk100>; -}; - -&lpd_dma_chan2 { - clocks = <&clk600>, <&clk100>; -}; - -&lpd_dma_chan3 { - clocks = <&clk600>, <&clk100>; -}; - -&lpd_dma_chan4 { - clocks = <&clk600>, <&clk100>; -}; - -&lpd_dma_chan5 { - clocks = <&clk600>, <&clk100>; -}; - -&lpd_dma_chan6 { - clocks = <&clk600>, <&clk100>; -}; - -&lpd_dma_chan7 { - clocks = <&clk600>, <&clk100>; -}; - -&lpd_dma_chan8 { - clocks = <&clk600>, <&clk100>; -}; - -&gem0 { - clocks = <&clk125>, <&clk125>, <&clk125>; -}; - -&gem1 { - clocks = <&clk125>, <&clk125>, <&clk125>; -}; - -&gem2 { - clocks = <&clk125>, <&clk125>, <&clk125>; -}; - -&gem3 { - clocks = <&clk125>, <&clk125>, <&clk125>; -}; - -&gpio { - clocks = <&clk100>; -}; - -&i2c0 { - clocks = <&clk100>; -}; - -&i2c1 { - clocks = <&clk100>; -}; - -&sata { - clocks = <&clk250>; -}; - -&sdhci0 { - clocks = <&clk200 &clk200>; -}; - -&sdhci1 { - clocks = <&clk200 &clk200>; -}; - -&spi0 { - clocks = <&clk200 &clk200>; -}; - -&spi1 { - clocks = <&clk200 &clk200>; -}; - -&uart0 { - clocks = <&clk100 &clk100>; -}; - -&uart1 { - clocks = <&clk100 &clk100>; -}; - -&usb0 { - clocks = <&clk250>, <&clk250>; -}; - -&usb1 { - clocks = <&clk250>, <&clk250>; -}; - -&watchdog0 { - clocks = <&clk250>; -}; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1232-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1232-revA.dts index 0f7b4cf6078e..2e05fa416955 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zc1232-revA.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1232-revA.dts @@ -2,7 +2,7 @@ /* * dts file for Xilinx ZynqMP ZC1232 * - * (C) Copyright 2017 - 2018, Xilinx, Inc. + * (C) Copyright 2017 - 2019, Xilinx, Inc. * * Michal Simek <michal.simek@xilinx.com> */ @@ -10,7 +10,7 @@ /dts-v1/; #include "zynqmp.dtsi" -#include "zynqmp-clk.dtsi" +#include "zynqmp-clk-ccf.dtsi" / { model = "ZynqMP ZC1232 RevA"; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1254-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1254-revA.dts index 9092828f92ec..3d0aaa02f184 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zc1254-revA.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1254-revA.dts @@ -2,7 +2,7 @@ /* * dts file for Xilinx ZynqMP ZC1254 * - * (C) Copyright 2015 - 2018, Xilinx, Inc. + * (C) Copyright 2015 - 2019, Xilinx, Inc. * * Michal Simek <michal.simek@xilinx.com> * Siva Durga Prasad Paladugu <sivadur@xilinx.com> @@ -11,7 +11,7 @@ /dts-v1/; #include "zynqmp.dtsi" -#include "zynqmp-clk.dtsi" +#include "zynqmp-clk-ccf.dtsi" / { model = "ZynqMP ZC1254 RevA"; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1275-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1275-revA.dts index 4f404c580eec..66a90483b004 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zc1275-revA.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1275-revA.dts @@ -2,7 +2,7 @@ /* * dts file for Xilinx ZynqMP ZC1275 * - * (C) Copyright 2017 - 2018, Xilinx, Inc. + * (C) Copyright 2017 - 2019, Xilinx, Inc. * * Michal Simek <michal.simek@xilinx.com> * Siva Durga Prasad Paladugu <sivadur@xilinx.com> @@ -11,7 +11,7 @@ /dts-v1/; #include "zynqmp.dtsi" -#include "zynqmp-clk.dtsi" +#include "zynqmp-clk-ccf.dtsi" / { model = "ZynqMP ZC1275 RevA"; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts index 9a3e39d1294f..69f6e4610739 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts @@ -2,7 +2,7 @@ /* * dts file for Xilinx ZynqMP zc1751-xm015-dc1 * - * (C) Copyright 2015 - 2018, Xilinx, Inc. + * (C) Copyright 2015 - 2019, Xilinx, Inc. * * Michal Simek <michal.simek@xilinx.com> */ @@ -10,7 +10,7 @@ /dts-v1/; #include "zynqmp.dtsi" -#include "zynqmp-clk.dtsi" +#include "zynqmp-clk-ccf.dtsi" #include <dt-bindings/gpio/gpio.h> / { @@ -73,7 +73,7 @@ status = "okay"; phy-handle = <&phy0>; phy-mode = "rgmii-id"; - phy0: phy@0 { + phy0: ethernet-phy@0 { reg = <0>; }; }; @@ -128,4 +128,5 @@ /* ULPI SMSC USB3320 */ &usb0 { status = "okay"; + dr_mode = "host"; }; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts index 2421ec71a201..4a86efa32d68 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts @@ -2,7 +2,7 @@ /* * dts file for Xilinx ZynqMP zc1751-xm016-dc2 * - * (C) Copyright 2015 - 2018, Xilinx, Inc. + * (C) Copyright 2015 - 2019, Xilinx, Inc. * * Michal Simek <michal.simek@xilinx.com> */ @@ -10,7 +10,7 @@ /dts-v1/; #include "zynqmp.dtsi" -#include "zynqmp-clk.dtsi" +#include "zynqmp-clk-ccf.dtsi" #include <dt-bindings/gpio/gpio.h> / { @@ -84,7 +84,7 @@ status = "okay"; phy-handle = <&phy0>; phy-mode = "rgmii-id"; - phy0: phy@5 { + phy0: ethernet-phy@5 { reg = <5>; ti,rx-internal-delay = <0x8>; ti,tx-internal-delay = <0xa>; @@ -123,7 +123,7 @@ status = "okay"; num-cs = <1>; - spi0_flash0: flash0@0 { + spi0_flash0: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "sst,sst25wf080", "jedec,spi-nor"; @@ -141,7 +141,7 @@ status = "okay"; num-cs = <1>; - spi1_flash0: flash0@0 { + spi1_flash0: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "atmel,at45db041e", "atmel,at45", "atmel,dataflash"; @@ -158,6 +158,7 @@ /* ULPI SMSC USB3320 */ &usb1 { status = "okay"; + dr_mode = "host"; }; &uart0 { diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm017-dc3.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm017-dc3.dts index 7a49deeae647..4ea6ef5a7f2b 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm017-dc3.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm017-dc3.dts @@ -2,7 +2,7 @@ /* * dts file for Xilinx ZynqMP zc1751-xm017-dc3 * - * (C) Copyright 2016 - 2018, Xilinx, Inc. + * (C) Copyright 2016 - 2019, Xilinx, Inc. * * Michal Simek <michal.simek@xilinx.com> */ @@ -10,7 +10,7 @@ /dts-v1/; #include "zynqmp.dtsi" -#include "zynqmp-clk.dtsi" +#include "zynqmp-clk-ccf.dtsi" / { model = "ZynqMP zc1751-xm017-dc3 RevA"; @@ -73,7 +73,7 @@ status = "okay"; phy-handle = <&phy0>; phy-mode = "rgmii-id"; - phy0: phy@0 { /* VSC8211 */ + phy0: ethernet-phy@0 { /* VSC8211 */ reg = <0>; }; }; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm018-dc4.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm018-dc4.dts index 54c7b4f1d1e4..2366cd9f091a 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm018-dc4.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm018-dc4.dts @@ -2,7 +2,7 @@ /* * dts file for Xilinx ZynqMP zc1751-xm018-dc4 * - * (C) Copyright 2015 - 2018, Xilinx, Inc. + * (C) Copyright 2015 - 2019, Xilinx, Inc. * * Michal Simek <michal.simek@xilinx.com> */ @@ -10,7 +10,7 @@ /dts-v1/; #include "zynqmp.dtsi" -#include "zynqmp-clk.dtsi" +#include "zynqmp-clk-ccf.dtsi" / { model = "ZynqMP zc1751-xm018-dc4"; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm019-dc5.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm019-dc5.dts index b8b5ff13818d..41934e3525c6 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm019-dc5.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm019-dc5.dts @@ -2,7 +2,7 @@ /* * dts file for Xilinx ZynqMP zc1751-xm019-dc5 * - * (C) Copyright 2015 - 2018, Xilinx, Inc. + * (C) Copyright 2015 - 2019, Xilinx, Inc. * * Siva Durga Prasad <siva.durga.paladugu@xilinx.com> * Michal Simek <michal.simek@xilinx.com> @@ -11,7 +11,7 @@ /dts-v1/; #include "zynqmp.dtsi" -#include "zynqmp-clk.dtsi" +#include "zynqmp-clk-ccf.dtsi" #include <dt-bindings/gpio/gpio.h> / { @@ -74,7 +74,7 @@ status = "okay"; phy-handle = <&phy0>; phy-mode = "rgmii-id"; - phy0: phy@0 { + phy0: ethernet-phy@0 { reg = <0>; }; }; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts index e5699d0d91e4..d60110ad8367 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts @@ -2,7 +2,7 @@ /* * dts file for Xilinx ZynqMP ZCU100 revC * - * (C) Copyright 2016 - 2018, Xilinx, Inc. + * (C) Copyright 2016 - 2019, Xilinx, Inc. * * Michal Simek <michal.simek@xilinx.com> * Nathalie Chan King Choy @@ -11,7 +11,7 @@ /dts-v1/; #include "zynqmp.dtsi" -#include "zynqmp-clk.dtsi" +#include "zynqmp-clk-ccf.dtsi" #include <dt-bindings/input/input.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/gpio/gpio.h> @@ -103,6 +103,11 @@ reset-gpios = <&gpio 7 GPIO_ACTIVE_LOW>; /* WIFI_EN */ post-power-on-delay-ms = <10>; }; + + ina226 { + compatible = "iio-hwmon"; + io-channels = <&u35 0>, <&u35 1>, <&u35 2>, <&u35 3>; + }; }; &dcc { @@ -191,8 +196,9 @@ #size-cells = <0>; reg = <5>; /* PS_PMBUS */ - ina226@40 { /* u35 */ + u35: ina226@40 { /* u35 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; reg = <0x40>; shunt-resistor = <10000>; /* MIO31 is alert which should be routed to PMUFW */ @@ -226,7 +232,6 @@ &sdhci0 { status = "okay"; no-1-8-v; - broken-cd; /* CD has to be enabled by default */ disable-wp; }; @@ -251,11 +256,13 @@ &spi0 { /* Low Speed connector */ status = "okay"; label = "LS-SPI0"; + num-cs = <1>; }; &spi1 { /* High Speed connector */ status = "okay"; label = "HS-SPI1"; + num-cs = <1>; }; &uart0 { @@ -274,11 +281,13 @@ /* ULPI SMSC USB3320 */ &usb0 { status = "okay"; + dr_mode = "peripheral"; }; /* ULPI SMSC USB3320 */ &usb1 { status = "okay"; + dr_mode = "host"; }; &watchdog0 { diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts index 2a3b66547c6d..4f801721564f 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts @@ -2,7 +2,7 @@ /* * dts file for Xilinx ZynqMP ZCU102 RevA * - * (C) Copyright 2015 - 2018, Xilinx, Inc. + * (C) Copyright 2015 - 2019, Xilinx, Inc. * * Michal Simek <michal.simek@xilinx.com> */ @@ -10,7 +10,7 @@ /dts-v1/; #include "zynqmp.dtsi" -#include "zynqmp-clk.dtsi" +#include "zynqmp-clk-ccf.dtsi" #include <dt-bindings/input/input.h> #include <dt-bindings/gpio/gpio.h> @@ -59,6 +59,79 @@ linux,default-trigger = "heartbeat"; }; }; + + ina226-u76 { + compatible = "iio-hwmon"; + io-channels = <&u76 0>, <&u76 1>, <&u76 2>, <&u76 3>; + }; + ina226-u77 { + compatible = "iio-hwmon"; + io-channels = <&u77 0>, <&u77 1>, <&u77 2>, <&u77 3>; + }; + ina226-u78 { + compatible = "iio-hwmon"; + io-channels = <&u78 0>, <&u78 1>, <&u78 2>, <&u78 3>; + }; + ina226-u87 { + compatible = "iio-hwmon"; + io-channels = <&u87 0>, <&u87 1>, <&u87 2>, <&u87 3>; + }; + ina226-u85 { + compatible = "iio-hwmon"; + io-channels = <&u85 0>, <&u85 1>, <&u85 2>, <&u85 3>; + }; + ina226-u86 { + compatible = "iio-hwmon"; + io-channels = <&u86 0>, <&u86 1>, <&u86 2>, <&u86 3>; + }; + ina226-u93 { + compatible = "iio-hwmon"; + io-channels = <&u93 0>, <&u93 1>, <&u93 2>, <&u93 3>; + }; + ina226-u88 { + compatible = "iio-hwmon"; + io-channels = <&u88 0>, <&u88 1>, <&u88 2>, <&u88 3>; + }; + ina226-u15 { + compatible = "iio-hwmon"; + io-channels = <&u15 0>, <&u15 1>, <&u15 2>, <&u15 3>; + }; + ina226-u92 { + compatible = "iio-hwmon"; + io-channels = <&u92 0>, <&u92 1>, <&u92 2>, <&u92 3>; + }; + ina226-u79 { + compatible = "iio-hwmon"; + io-channels = <&u79 0>, <&u79 1>, <&u79 2>, <&u79 3>; + }; + ina226-u81 { + compatible = "iio-hwmon"; + io-channels = <&u81 0>, <&u81 1>, <&u81 2>, <&u81 3>; + }; + ina226-u80 { + compatible = "iio-hwmon"; + io-channels = <&u80 0>, <&u80 1>, <&u80 2>, <&u80 3>; + }; + ina226-u84 { + compatible = "iio-hwmon"; + io-channels = <&u84 0>, <&u84 1>, <&u84 2>, <&u84 3>; + }; + ina226-u16 { + compatible = "iio-hwmon"; + io-channels = <&u16 0>, <&u16 1>, <&u16 2>, <&u16 3>; + }; + ina226-u65 { + compatible = "iio-hwmon"; + io-channels = <&u65 0>, <&u65 1>, <&u65 2>, <&u65 3>; + }; + ina226-u74 { + compatible = "iio-hwmon"; + io-channels = <&u74 0>, <&u74 1>, <&u74 2>, <&u74 3>; + }; + ina226-u75 { + compatible = "iio-hwmon"; + io-channels = <&u75 0>, <&u75 1>, <&u75 2>, <&u75 3>; + }; }; &can1 { @@ -105,7 +178,7 @@ status = "okay"; phy-handle = <&phy0>; phy-mode = "rgmii-id"; - phy0: phy@21 { + phy0: ethernet-phy@21 { reg = <21>; ti,rx-internal-delay = <0x8>; ti,tx-internal-delay = <0xa>; @@ -125,21 +198,11 @@ tca6416_u97: gpio@20 { compatible = "ti,tca6416"; reg = <0x20>; - gpio-controller; + gpio-controller; /* IRQ not connected */ #gpio-cells = <2>; - /* - * IRQ not connected - * Lines: - * 0 - PS_GTR_LAN_SEL0 - * 1 - PS_GTR_LAN_SEL1 - * 2 - PS_GTR_LAN_SEL2 - * 3 - PS_GTR_LAN_SEL3 - * 4 - PCI_CLK_DIR_SEL - * 5 - IIC_MUX_RESET_B - * 6 - GEM3_EXP_RESET_B - * 7, 10 - 17 - not connected - */ - + gpio-line-names = "PS_GTR_LAN_SEL0", "PS_GTR_LAN_SEL1", "PS_GTR_LAN_SEL2", "PS_GTR_LAN_SEL3", + "PCI_CLK_DIR_SEL", "IIC_MUX_RESET_B", "GEM3_EXP_RESET_B", + "", "", "", "", "", "", "", "", ""; gtr-sel0 { gpio-hog; gpios = <0 0>; @@ -169,27 +232,12 @@ tca6416_u61: gpio@21 { compatible = "ti,tca6416"; reg = <0x21>; - gpio-controller; + gpio-controller; /* IRQ not connected */ #gpio-cells = <2>; - /* - * IRQ not connected - * Lines: - * 0 - VCCPSPLL_EN - * 1 - MGTRAVCC_EN - * 2 - MGTRAVTT_EN - * 3 - VCCPSDDRPLL_EN - * 4 - MIO26_PMU_INPUT_LS - * 5 - PL_PMBUS_ALERT - * 6 - PS_PMBUS_ALERT - * 7 - MAXIM_PMBUS_ALERT - * 10 - PL_DDR4_VTERM_EN - * 11 - PL_DDR4_VPP_2V5_EN - * 12 - PS_DIMM_VDDQ_TO_PSVCCO_ON - * 13 - PS_DIMM_SUSPEND_EN - * 14 - PS_DDR4_VTERM_EN - * 15 - PS_DDR4_VPP_2V5_EN - * 16 - 17 - not connected - */ + gpio-line-names = "VCCPSPLL_EN", "MGTRAVCC_EN", "MGTRAVTT_EN", "VCCPSDDRPLL_EN", "MIO26_PMU_INPUT_LS", + "PL_PMBUS_ALERT", "PS_PMBUS_ALERT", "MAXIM_PMBUS_ALERT", "PL_DDR4_VTERM_EN", + "PL_DDR4_VPP_2V5_EN", "PS_DIMM_VDDQ_TO_PSVCCO_ON", "PS_DIMM_SUSPEND_EN", + "PS_DDR4_VTERM_EN", "PS_DDR4_VPP_2V5_EN", "", ""; }; i2c-mux@75 { /* u60 */ @@ -202,53 +250,73 @@ #size-cells = <0>; reg = <0>; /* PS_PMBUS */ - ina226@40 { /* u76 */ + u76: ina226@40 { /* u76 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u76"; reg = <0x40>; shunt-resistor = <5000>; }; - ina226@41 { /* u77 */ + u77: ina226@41 { /* u77 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u77"; reg = <0x41>; shunt-resistor = <5000>; }; - ina226@42 { /* u78 */ + u78: ina226@42 { /* u78 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u78"; reg = <0x42>; shunt-resistor = <5000>; }; - ina226@43 { /* u87 */ + u87: ina226@43 { /* u87 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u87"; reg = <0x43>; shunt-resistor = <5000>; }; - ina226@44 { /* u85 */ + u85: ina226@44 { /* u85 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u85"; reg = <0x44>; shunt-resistor = <5000>; }; - ina226@45 { /* u86 */ + u86: ina226@45 { /* u86 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u86"; reg = <0x45>; shunt-resistor = <5000>; }; - ina226@46 { /* u93 */ + u93: ina226@46 { /* u93 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u93"; reg = <0x46>; shunt-resistor = <5000>; }; - ina226@47 { /* u88 */ + u88: ina226@47 { /* u88 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u88"; reg = <0x47>; shunt-resistor = <5000>; }; - ina226@4a { /* u15 */ + u15: ina226@4a { /* u15 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u15"; reg = <0x4a>; shunt-resistor = <5000>; }; - ina226@4b { /* u92 */ + u92: ina226@4b { /* u92 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u92"; reg = <0x4b>; shunt-resistor = <5000>; }; @@ -258,43 +326,59 @@ #size-cells = <0>; reg = <1>; /* PL_PMBUS */ - ina226@40 { /* u79 */ + u79: ina226@40 { /* u79 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u79"; reg = <0x40>; shunt-resistor = <2000>; }; - ina226@41 { /* u81 */ + u81: ina226@41 { /* u81 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u81"; reg = <0x41>; shunt-resistor = <5000>; }; - ina226@42 { /* u80 */ + u80: ina226@42 { /* u80 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u80"; reg = <0x42>; shunt-resistor = <5000>; }; - ina226@43 { /* u84 */ + u84: ina226@43 { /* u84 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u84"; reg = <0x43>; shunt-resistor = <5000>; }; - ina226@44 { /* u16 */ + u16: ina226@44 { /* u16 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u16"; reg = <0x44>; shunt-resistor = <5000>; }; - ina226@45 { /* u65 */ + u65: ina226@45 { /* u65 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u65"; reg = <0x45>; shunt-resistor = <5000>; }; - ina226@46 { /* u74 */ + u74: ina226@46 { /* u74 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u74"; reg = <0x46>; shunt-resistor = <5000>; }; - ina226@47 { /* u75 */ + u75: ina226@47 { /* u75 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u75"; reg = <0x47>; shunt-resistor = <5000>; }; @@ -414,6 +498,7 @@ temperature-stability = <50>; factory-fout = <300000000>; clock-frequency = <300000000>; + clock-output-names = "si570_user"; }; }; i2c@3 { @@ -427,6 +512,7 @@ temperature-stability = <50>; /* copy from zc702 */ factory-fout = <156250000>; clock-frequency = <148500000>; + clock-output-names = "si570_mgt"; }; }; i2c@4 { @@ -540,6 +626,7 @@ /* ULPI SMSC USB3320 */ &usb0 { status = "okay"; + dr_mode = "host"; }; &watchdog0 { diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revB.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revB.dts index 1780ed237daf..d9ad8a4b20d3 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revB.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revB.dts @@ -16,7 +16,7 @@ &gem3 { phy-handle = <&phyc>; - phyc: phy@c { + phyc: ethernet-phy@c { reg = <0xc>; ti,rx-internal-delay = <0x8>; ti,tx-internal-delay = <0xa>; @@ -24,7 +24,7 @@ ti,dp83867-rxctrl-strap-quirk; }; /* Cleanup from RevA */ - /delete-node/ phy@21; + /delete-node/ ethernet-phy@21; }; /* Fix collision with u61 */ diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts index 8f456146409f..7a4614e3f5fa 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts @@ -2,7 +2,7 @@ /* * dts file for Xilinx ZynqMP ZCU104 * - * (C) Copyright 2017 - 2018, Xilinx, Inc. + * (C) Copyright 2017 - 2019, Xilinx, Inc. * * Michal Simek <michal.simek@xilinx.com> */ @@ -10,7 +10,7 @@ /dts-v1/; #include "zynqmp.dtsi" -#include "zynqmp-clk.dtsi" +#include "zynqmp-clk-ccf.dtsi" #include <dt-bindings/gpio/gpio.h> / { @@ -50,7 +50,7 @@ status = "okay"; phy-handle = <&phy0>; phy-mode = "rgmii-id"; - phy0: phy@c { + phy0: ethernet-phy@c { reg = <0xc>; ti,rx-internal-delay = <0x8>; ti,tx-internal-delay = <0xa>; @@ -118,9 +118,9 @@ #address-cells = <1>; #size-cells = <0>; reg = <4>; - tca6416_u97: gpio@21 { + tca6416_u97: gpio@20 { compatible = "ti,tca6416"; - reg = <0x21>; + reg = <0x20>; gpio-controller; #gpio-cells = <2>; /* @@ -189,6 +189,7 @@ /* ULPI SMSC USB3320 */ &usb0 { status = "okay"; + dr_mode = "host"; }; &watchdog0 { diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts index 93ce7eb81498..6e9efe233838 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts @@ -2,7 +2,7 @@ /* * dts file for Xilinx ZynqMP ZCU106 * - * (C) Copyright 2016, Xilinx, Inc. + * (C) Copyright 2016 - 2019, Xilinx, Inc. * * Michal Simek <michal.simek@xilinx.com> */ @@ -10,7 +10,7 @@ /dts-v1/; #include "zynqmp.dtsi" -#include "zynqmp-clk.dtsi" +#include "zynqmp-clk-ccf.dtsi" #include <dt-bindings/input/input.h> #include <dt-bindings/gpio/gpio.h> @@ -59,6 +59,79 @@ linux,default-trigger = "heartbeat"; }; }; + + ina226-u76 { + compatible = "iio-hwmon"; + io-channels = <&u76 0>, <&u76 1>, <&u76 2>, <&u76 3>; + }; + ina226-u77 { + compatible = "iio-hwmon"; + io-channels = <&u77 0>, <&u77 1>, <&u77 2>, <&u77 3>; + }; + ina226-u78 { + compatible = "iio-hwmon"; + io-channels = <&u78 0>, <&u78 1>, <&u78 2>, <&u78 3>; + }; + ina226-u87 { + compatible = "iio-hwmon"; + io-channels = <&u87 0>, <&u87 1>, <&u87 2>, <&u87 3>; + }; + ina226-u85 { + compatible = "iio-hwmon"; + io-channels = <&u85 0>, <&u85 1>, <&u85 2>, <&u85 3>; + }; + ina226-u86 { + compatible = "iio-hwmon"; + io-channels = <&u86 0>, <&u86 1>, <&u86 2>, <&u86 3>; + }; + ina226-u93 { + compatible = "iio-hwmon"; + io-channels = <&u93 0>, <&u93 1>, <&u93 2>, <&u93 3>; + }; + ina226-u88 { + compatible = "iio-hwmon"; + io-channels = <&u88 0>, <&u88 1>, <&u88 2>, <&u88 3>; + }; + ina226-u15 { + compatible = "iio-hwmon"; + io-channels = <&u15 0>, <&u15 1>, <&u15 2>, <&u15 3>; + }; + ina226-u92 { + compatible = "iio-hwmon"; + io-channels = <&u92 0>, <&u92 1>, <&u92 2>, <&u92 3>; + }; + ina226-u79 { + compatible = "iio-hwmon"; + io-channels = <&u79 0>, <&u79 1>, <&u79 2>, <&u79 3>; + }; + ina226-u81 { + compatible = "iio-hwmon"; + io-channels = <&u81 0>, <&u81 1>, <&u81 2>, <&u81 3>; + }; + ina226-u80 { + compatible = "iio-hwmon"; + io-channels = <&u80 0>, <&u80 1>, <&u80 2>, <&u80 3>; + }; + ina226-u84 { + compatible = "iio-hwmon"; + io-channels = <&u84 0>, <&u84 1>, <&u84 2>, <&u84 3>; + }; + ina226-u16 { + compatible = "iio-hwmon"; + io-channels = <&u16 0>, <&u16 1>, <&u16 2>, <&u16 3>; + }; + ina226-u65 { + compatible = "iio-hwmon"; + io-channels = <&u65 0>, <&u65 1>, <&u65 2>, <&u65 3>; + }; + ina226-u74 { + compatible = "iio-hwmon"; + io-channels = <&u74 0>, <&u74 1>, <&u74 2>, <&u74 3>; + }; + ina226-u75 { + compatible = "iio-hwmon"; + io-channels = <&u75 0>, <&u75 1>, <&u75 2>, <&u75 3>; + }; }; &can1 { @@ -106,7 +179,7 @@ status = "okay"; phy-handle = <&phy0>; phy-mode = "rgmii-id"; - phy0: phy@c { + phy0: ethernet-phy@c { reg = <0xc>; ti,rx-internal-delay = <0x8>; ti,tx-internal-delay = <0xa>; @@ -177,53 +250,73 @@ #size-cells = <0>; reg = <0>; /* PS_PMBUS */ - ina226@40 { /* u76 */ + u76: ina226@40 { /* u76 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u76"; reg = <0x40>; shunt-resistor = <5000>; }; - ina226@41 { /* u77 */ + u77: ina226@41 { /* u77 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u77"; reg = <0x41>; shunt-resistor = <5000>; }; - ina226@42 { /* u78 */ + u78: ina226@42 { /* u78 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u78"; reg = <0x42>; shunt-resistor = <5000>; }; - ina226@43 { /* u87 */ + u87: ina226@43 { /* u87 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u87"; reg = <0x43>; shunt-resistor = <5000>; }; - ina226@44 { /* u85 */ + u85: ina226@44 { /* u85 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u85"; reg = <0x44>; shunt-resistor = <5000>; }; - ina226@45 { /* u86 */ + u86: ina226@45 { /* u86 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u86"; reg = <0x45>; shunt-resistor = <5000>; }; - ina226@46 { /* u93 */ + u93: ina226@46 { /* u93 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u93"; reg = <0x46>; shunt-resistor = <5000>; }; - ina226@47 { /* u88 */ + u88: ina226@47 { /* u88 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u88"; reg = <0x47>; shunt-resistor = <5000>; }; - ina226@4a { /* u15 */ + u15: ina226@4a { /* u15 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u15"; reg = <0x4a>; shunt-resistor = <5000>; }; - ina226@4b { /* u92 */ + u92: ina226@4b { /* u92 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u92"; reg = <0x4b>; shunt-resistor = <5000>; }; @@ -233,43 +326,59 @@ #size-cells = <0>; reg = <1>; /* PL_PMBUS */ - ina226@40 { /* u79 */ + u79: ina226@40 { /* u79 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u79"; reg = <0x40>; shunt-resistor = <2000>; }; - ina226@41 { /* u81 */ + u81: ina226@41 { /* u81 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u81"; reg = <0x41>; shunt-resistor = <5000>; }; - ina226@42 { /* u80 */ + u80: ina226@42 { /* u80 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u80"; reg = <0x42>; shunt-resistor = <5000>; }; - ina226@43 { /* u84 */ + u84: ina226@43 { /* u84 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u84"; reg = <0x43>; shunt-resistor = <5000>; }; - ina226@44 { /* u16 */ + u16: ina226@44 { /* u16 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u16"; reg = <0x44>; shunt-resistor = <5000>; }; - ina226@45 { /* u65 */ + u65: ina226@45 { /* u65 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u65"; reg = <0x45>; shunt-resistor = <5000>; }; - ina226@46 { /* u74 */ + u74: ina226@46 { /* u74 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u74"; reg = <0x46>; shunt-resistor = <5000>; }; - ina226@47 { /* u75 */ + u75: ina226@47 { /* u75 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u75"; reg = <0x47>; shunt-resistor = <5000>; }; @@ -388,6 +497,7 @@ temperature-stability = <50>; factory-fout = <300000000>; clock-frequency = <300000000>; + clock-output-names = "si570_user"; }; }; i2c@3 { @@ -401,6 +511,7 @@ temperature-stability = <50>; /* copy from zc702 */ factory-fout = <156250000>; clock-frequency = <148500000>; + clock-output-names = "si570_mgt"; }; }; i2c@4 { @@ -514,6 +625,7 @@ /* ULPI SMSC USB3320 */ &usb0 { status = "okay"; + dr_mode = "host"; }; &watchdog0 { diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts index 8bb0001a026f..2e92634c77f9 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts @@ -2,7 +2,7 @@ /* * dts file for Xilinx ZynqMP ZCU111 * - * (C) Copyright 2017 - 2018, Xilinx, Inc. + * (C) Copyright 2017 - 2019, Xilinx, Inc. * * Michal Simek <michal.simek@xilinx.com> */ @@ -10,7 +10,7 @@ /dts-v1/; #include "zynqmp.dtsi" -#include "zynqmp-clk.dtsi" +#include "zynqmp-clk-ccf.dtsi" #include <dt-bindings/input/input.h> #include <dt-bindings/gpio/gpio.h> @@ -59,6 +59,63 @@ linux,default-trigger = "heartbeat"; }; }; + + ina226-u67 { + compatible = "iio-hwmon"; + io-channels = <&u67 0>, <&u67 1>, <&u67 2>, <&u67 3>; + }; + ina226-u59 { + compatible = "iio-hwmon"; + io-channels = <&u59 0>, <&u59 1>, <&u59 2>, <&u59 3>; + }; + ina226-u61 { + compatible = "iio-hwmon"; + io-channels = <&u61 0>, <&u61 1>, <&u61 2>, <&u61 3>; + }; + ina226-u60 { + compatible = "iio-hwmon"; + io-channels = <&u60 0>, <&u60 1>, <&u60 2>, <&u60 3>; + }; + ina226-u64 { + compatible = "iio-hwmon"; + io-channels = <&u64 0>, <&u64 1>, <&u64 2>, <&u64 3>; + }; + ina226-u69 { + compatible = "iio-hwmon"; + io-channels = <&u69 0>, <&u69 1>, <&u69 2>, <&u69 3>; + }; + ina226-u66 { + compatible = "iio-hwmon"; + io-channels = <&u66 0>, <&u66 1>, <&u66 2>, <&u66 3>; + }; + ina226-u65 { + compatible = "iio-hwmon"; + io-channels = <&u65 0>, <&u65 1>, <&u65 2>, <&u65 3>; + }; + ina226-u63 { + compatible = "iio-hwmon"; + io-channels = <&u63 0>, <&u63 1>, <&u63 2>, <&u63 3>; + }; + ina226-u3 { + compatible = "iio-hwmon"; + io-channels = <&u3 0>, <&u3 1>, <&u3 2>, <&u3 3>; + }; + ina226-u71 { + compatible = "iio-hwmon"; + io-channels = <&u71 0>, <&u71 1>, <&u71 2>, <&u71 3>; + }; + ina226-u77 { + compatible = "iio-hwmon"; + io-channels = <&u77 0>, <&u77 1>, <&u77 2>, <&u77 3>; + }; + ina226-u73 { + compatible = "iio-hwmon"; + io-channels = <&u73 0>, <&u73 1>, <&u73 2>, <&u73 3>; + }; + ina226-u79 { + compatible = "iio-hwmon"; + io-channels = <&u79 0>, <&u79 1>, <&u79 2>, <&u79 3>; + }; }; &dcc { @@ -101,7 +158,7 @@ status = "okay"; phy-handle = <&phy0>; phy-mode = "rgmii-id"; - phy0: phy@c { + phy0: ethernet-phy@c { reg = <0xc>; ti,rx-internal-delay = <0x8>; ti,tx-internal-delay = <0xa>; @@ -152,73 +209,101 @@ reg = <0>; /* PS_PMBUS */ /* PMBUS_ALERT done via pca9544 */ - ina226@40 { /* u67 */ + u67: ina226@40 { /* u67 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u67"; reg = <0x40>; shunt-resistor = <2000>; }; - ina226@41 { /* u59 */ + u59: ina226@41 { /* u59 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u59"; reg = <0x41>; shunt-resistor = <5000>; }; - ina226@42 { /* u61 */ + u61: ina226@42 { /* u61 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u61"; reg = <0x42>; shunt-resistor = <5000>; }; - ina226@43 { /* u60 */ + u60: ina226@43 { /* u60 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u60"; reg = <0x43>; shunt-resistor = <5000>; }; - ina226@45 { /* u64 */ + u64: ina226@45 { /* u64 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u64"; reg = <0x45>; shunt-resistor = <5000>; }; - ina226@46 { /* u69 */ + u69: ina226@46 { /* u69 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u69"; reg = <0x46>; shunt-resistor = <2000>; }; - ina226@47 { /* u66 */ + u66: ina226@47 { /* u66 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u66"; reg = <0x47>; shunt-resistor = <5000>; }; - ina226@48 { /* u65 */ + u65: ina226@48 { /* u65 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u65"; reg = <0x48>; shunt-resistor = <5000>; }; - ina226@49 { /* u63 */ + u63: ina226@49 { /* u63 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u63"; reg = <0x49>; shunt-resistor = <5000>; }; - ina226@4a { /* u3 */ + u3: ina226@4a { /* u3 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u3"; reg = <0x4a>; shunt-resistor = <5000>; }; - ina226@4b { /* u71 */ + u71: ina226@4b { /* u71 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u71"; reg = <0x4b>; shunt-resistor = <5000>; }; - ina226@4c { /* u77 */ + u77: ina226@4c { /* u77 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u77"; reg = <0x4c>; shunt-resistor = <5000>; }; - ina226@4d { /* u73 */ + u73: ina226@4d { /* u73 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u73"; reg = <0x4d>; shunt-resistor = <5000>; }; - ina226@4e { /* u79 */ + u79: ina226@4e { /* u79 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; + label = "ina226-u79"; reg = <0x4e>; shunt-resistor = <5000>; }; @@ -304,6 +389,7 @@ temperature-stability = <50>; factory-fout = <300000000>; clock-frequency = <300000000>; + clock-output-names = "si570_user"; }; }; i2c@3 { @@ -316,7 +402,8 @@ reg = <0x5d>; temperature-stability = <50>; factory-fout = <156250000>; - clock-frequency = <148500000>; + clock-frequency = <156250000>; + clock-output-names = "si570_mgt"; }; }; i2c@4 { @@ -440,4 +527,5 @@ /* ULPI SMSC USB3320 */ &usb0 { status = "okay"; + dr_mode = "host"; }; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi index 9aa67340a4d8..26d926eb1431 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi +++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi @@ -2,7 +2,7 @@ /* * dts file for Xilinx ZynqMP * - * (C) Copyright 2014 - 2015, Xilinx, Inc. + * (C) Copyright 2014 - 2019, Xilinx, Inc. * * Michal Simek <michal.simek@xilinx.com> * @@ -12,6 +12,8 @@ * the License, or (at your option) any later version. */ +#include <dt-bindings/power/xlnx-zynqmp-power.h> + / { compatible = "xlnx,zynqmp"; #address-cells = <2>; @@ -115,6 +117,50 @@ method = "smc"; }; + firmware { + zynqmp_firmware: zynqmp-firmware { + compatible = "xlnx,zynqmp-firmware"; + #power-domain-cells = <1>; + method = "smc"; + + zynqmp_power: zynqmp-power { + compatible = "xlnx,zynqmp-power"; + interrupt-parent = <&gic>; + interrupts = <0 35 4>; + }; + + zynqmp_clk: clock-controller { + u-boot,dm-pre-reloc; + #clock-cells = <1>; + compatible = "xlnx,zynqmp-clk"; + clocks = <&pss_ref_clk>, + <&video_clk>, + <&pss_alt_ref_clk>, + <&aux_ref_clk>, + <>_crx_ref_clk>; + clock-names = "pss_ref_clk", + "video_clk", + "pss_alt_ref_clk", + "aux_ref_clk", + "gt_crx_ref_clk"; + }; + + nvmem_firmware { + compatible = "xlnx,zynqmp-nvmem-fw"; + #address-cells = <1>; + #size-cells = <1>; + + soc_revision: soc_revision@0 { + reg = <0x0 0x4>; + }; + }; + + zynqmp_pcap: pcap { + compatible = "xlnx,zynqmp-pcap-fpga"; + }; + }; + }; + timer { compatible = "arm,armv8-timer"; interrupt-parent = <&gic>; @@ -124,6 +170,14 @@ <1 10 0xf08>; }; + fpga_full: fpga-full { + compatible = "fpga-region"; + fpga-mgr = <&zynqmp_pcap>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + }; + amba_apu: amba-apu@0 { compatible = "simple-bus"; #address-cells = <2>; @@ -158,6 +212,7 @@ interrupt-parent = <&gic>; tx-fifo-depth = <0x40>; rx-fifo-depth = <0x40>; + power-domains = <&zynqmp_firmware PD_CAN_0>; }; can1: can@ff070000 { @@ -169,6 +224,7 @@ interrupt-parent = <&gic>; tx-fifo-depth = <0x40>; rx-fifo-depth = <0x40>; + power-domains = <&zynqmp_firmware PD_CAN_1>; }; cci: cci@fd6e0000 { @@ -199,6 +255,7 @@ interrupts = <0 124 4>; clock-names = "clk_main", "clk_apb"; xlnx,bus-width = <128>; + power-domains = <&zynqmp_firmware PD_GDMA>; }; fpd_dma_chan2: dma@fd510000 { @@ -209,6 +266,7 @@ interrupts = <0 125 4>; clock-names = "clk_main", "clk_apb"; xlnx,bus-width = <128>; + power-domains = <&zynqmp_firmware PD_GDMA>; }; fpd_dma_chan3: dma@fd520000 { @@ -219,6 +277,7 @@ interrupts = <0 126 4>; clock-names = "clk_main", "clk_apb"; xlnx,bus-width = <128>; + power-domains = <&zynqmp_firmware PD_GDMA>; }; fpd_dma_chan4: dma@fd530000 { @@ -229,6 +288,7 @@ interrupts = <0 127 4>; clock-names = "clk_main", "clk_apb"; xlnx,bus-width = <128>; + power-domains = <&zynqmp_firmware PD_GDMA>; }; fpd_dma_chan5: dma@fd540000 { @@ -239,6 +299,7 @@ interrupts = <0 128 4>; clock-names = "clk_main", "clk_apb"; xlnx,bus-width = <128>; + power-domains = <&zynqmp_firmware PD_GDMA>; }; fpd_dma_chan6: dma@fd550000 { @@ -249,6 +310,7 @@ interrupts = <0 129 4>; clock-names = "clk_main", "clk_apb"; xlnx,bus-width = <128>; + power-domains = <&zynqmp_firmware PD_GDMA>; }; fpd_dma_chan7: dma@fd560000 { @@ -259,6 +321,7 @@ interrupts = <0 130 4>; clock-names = "clk_main", "clk_apb"; xlnx,bus-width = <128>; + power-domains = <&zynqmp_firmware PD_GDMA>; }; fpd_dma_chan8: dma@fd570000 { @@ -269,6 +332,7 @@ interrupts = <0 131 4>; clock-names = "clk_main", "clk_apb"; xlnx,bus-width = <128>; + power-domains = <&zynqmp_firmware PD_GDMA>; }; /* LPDDMA default allows only secured access. inorder to enable @@ -283,6 +347,7 @@ interrupts = <0 77 4>; clock-names = "clk_main", "clk_apb"; xlnx,bus-width = <64>; + power-domains = <&zynqmp_firmware PD_ADMA>; }; lpd_dma_chan2: dma@ffa90000 { @@ -293,6 +358,7 @@ interrupts = <0 78 4>; clock-names = "clk_main", "clk_apb"; xlnx,bus-width = <64>; + power-domains = <&zynqmp_firmware PD_ADMA>; }; lpd_dma_chan3: dma@ffaa0000 { @@ -303,6 +369,7 @@ interrupts = <0 79 4>; clock-names = "clk_main", "clk_apb"; xlnx,bus-width = <64>; + power-domains = <&zynqmp_firmware PD_ADMA>; }; lpd_dma_chan4: dma@ffab0000 { @@ -313,6 +380,7 @@ interrupts = <0 80 4>; clock-names = "clk_main", "clk_apb"; xlnx,bus-width = <64>; + power-domains = <&zynqmp_firmware PD_ADMA>; }; lpd_dma_chan5: dma@ffac0000 { @@ -323,6 +391,7 @@ interrupts = <0 81 4>; clock-names = "clk_main", "clk_apb"; xlnx,bus-width = <64>; + power-domains = <&zynqmp_firmware PD_ADMA>; }; lpd_dma_chan6: dma@ffad0000 { @@ -333,6 +402,7 @@ interrupts = <0 82 4>; clock-names = "clk_main", "clk_apb"; xlnx,bus-width = <64>; + power-domains = <&zynqmp_firmware PD_ADMA>; }; lpd_dma_chan7: dma@ffae0000 { @@ -343,6 +413,7 @@ interrupts = <0 83 4>; clock-names = "clk_main", "clk_apb"; xlnx,bus-width = <64>; + power-domains = <&zynqmp_firmware PD_ADMA>; }; lpd_dma_chan8: dma@ffaf0000 { @@ -353,6 +424,7 @@ interrupts = <0 84 4>; clock-names = "clk_main", "clk_apb"; xlnx,bus-width = <64>; + power-domains = <&zynqmp_firmware PD_ADMA>; }; mc: memory-controller@fd070000 { @@ -371,6 +443,7 @@ clock-names = "pclk", "hclk", "tx_clk"; #address-cells = <1>; #size-cells = <0>; + power-domains = <&zynqmp_firmware PD_ETH_0>; }; gem1: ethernet@ff0c0000 { @@ -382,6 +455,7 @@ clock-names = "pclk", "hclk", "tx_clk"; #address-cells = <1>; #size-cells = <0>; + power-domains = <&zynqmp_firmware PD_ETH_1>; }; gem2: ethernet@ff0d0000 { @@ -393,6 +467,7 @@ clock-names = "pclk", "hclk", "tx_clk"; #address-cells = <1>; #size-cells = <0>; + power-domains = <&zynqmp_firmware PD_ETH_2>; }; gem3: ethernet@ff0e0000 { @@ -404,6 +479,7 @@ clock-names = "pclk", "hclk", "tx_clk"; #address-cells = <1>; #size-cells = <0>; + power-domains = <&zynqmp_firmware PD_ETH_3>; }; gpio: gpio@ff0a0000 { @@ -416,6 +492,7 @@ interrupt-controller; #interrupt-cells = <2>; reg = <0x0 0xff0a0000 0x0 0x1000>; + power-domains = <&zynqmp_firmware PD_GPIO>; }; i2c0: i2c@ff020000 { @@ -426,6 +503,7 @@ reg = <0x0 0xff020000 0x0 0x1000>; #address-cells = <1>; #size-cells = <0>; + power-domains = <&zynqmp_firmware PD_I2C_0>; }; i2c1: i2c@ff030000 { @@ -436,6 +514,7 @@ reg = <0x0 0xff030000 0x0 0x1000>; #address-cells = <1>; #size-cells = <0>; + power-domains = <&zynqmp_firmware PD_I2C_1>; }; pcie: pcie@fd0e0000 { @@ -467,6 +546,7 @@ <0x0 0x0 0x0 0x2 &pcie_intc 0x2>, <0x0 0x0 0x0 0x3 &pcie_intc 0x3>, <0x0 0x0 0x0 0x4 &pcie_intc 0x4>; + power-domains = <&zynqmp_firmware PD_PCIE>; pcie_intc: legacy-interrupt-controller { interrupt-controller; #address-cells = <0>; @@ -490,24 +570,31 @@ reg = <0x0 0xfd0c0000 0x0 0x2000>; interrupt-parent = <&gic>; interrupts = <0 133 4>; + power-domains = <&zynqmp_firmware PD_SATA>; }; sdhci0: mmc@ff160000 { - compatible = "arasan,sdhci-8.9a"; + compatible = "xlnx,zynqmp-8.9a", "arasan,sdhci-8.9a"; status = "disabled"; interrupt-parent = <&gic>; interrupts = <0 48 4>; reg = <0x0 0xff160000 0x0 0x1000>; clock-names = "clk_xin", "clk_ahb"; + #clock-cells = <1>; + clock-output-names = "clk_out_sd0", "clk_in_sd0"; + power-domains = <&zynqmp_firmware PD_SD_0>; }; sdhci1: mmc@ff170000 { - compatible = "arasan,sdhci-8.9a"; + compatible = "xlnx,zynqmp-8.9a", "arasan,sdhci-8.9a"; status = "disabled"; interrupt-parent = <&gic>; interrupts = <0 49 4>; reg = <0x0 0xff170000 0x0 0x1000>; clock-names = "clk_xin", "clk_ahb"; + #clock-cells = <1>; + clock-output-names = "clk_out_sd1", "clk_in_sd1"; + power-domains = <&zynqmp_firmware PD_SD_1>; }; smmu: smmu@fd800000 { @@ -532,6 +619,7 @@ clock-names = "ref_clk", "pclk"; #address-cells = <1>; #size-cells = <0>; + power-domains = <&zynqmp_firmware PD_SPI_0>; }; spi1: spi@ff050000 { @@ -543,6 +631,7 @@ clock-names = "ref_clk", "pclk"; #address-cells = <1>; #size-cells = <0>; + power-domains = <&zynqmp_firmware PD_SPI_1>; }; ttc0: timer@ff110000 { @@ -552,6 +641,7 @@ interrupts = <0 36 4>, <0 37 4>, <0 38 4>; reg = <0x0 0xff110000 0x0 0x1000>; timer-width = <32>; + power-domains = <&zynqmp_firmware PD_TTC_0>; }; ttc1: timer@ff120000 { @@ -561,6 +651,7 @@ interrupts = <0 39 4>, <0 40 4>, <0 41 4>; reg = <0x0 0xff120000 0x0 0x1000>; timer-width = <32>; + power-domains = <&zynqmp_firmware PD_TTC_1>; }; ttc2: timer@ff130000 { @@ -570,6 +661,7 @@ interrupts = <0 42 4>, <0 43 4>, <0 44 4>; reg = <0x0 0xff130000 0x0 0x1000>; timer-width = <32>; + power-domains = <&zynqmp_firmware PD_TTC_2>; }; ttc3: timer@ff140000 { @@ -579,6 +671,7 @@ interrupts = <0 45 4>, <0 46 4>, <0 47 4>; reg = <0x0 0xff140000 0x0 0x1000>; timer-width = <32>; + power-domains = <&zynqmp_firmware PD_TTC_3>; }; uart0: serial@ff000000 { @@ -588,6 +681,7 @@ interrupts = <0 21 4>; reg = <0x0 0xff000000 0x0 0x1000>; clock-names = "uart_clk", "pclk"; + power-domains = <&zynqmp_firmware PD_UART_0>; }; uart1: serial@ff010000 { @@ -597,6 +691,7 @@ interrupts = <0 22 4>; reg = <0x0 0xff010000 0x0 0x1000>; clock-names = "uart_clk", "pclk"; + power-domains = <&zynqmp_firmware PD_UART_1>; }; usb0: usb@fe200000 { @@ -606,6 +701,7 @@ interrupts = <0 65 4>; reg = <0x0 0xfe200000 0x0 0x40000>; clock-names = "clk_xin", "clk_ahb"; + power-domains = <&zynqmp_firmware PD_USB_0>; }; usb1: usb@fe300000 { @@ -615,6 +711,7 @@ interrupts = <0 70 4>; reg = <0x0 0xfe300000 0x0 0x40000>; clock-names = "clk_xin", "clk_ahb"; + power-domains = <&zynqmp_firmware PD_USB_1>; }; watchdog0: watchdog@fd4d0000 { |
