diff options
Diffstat (limited to 'arch/arm/mach-ixp2000/include/mach/ixp2000-regs.h')
| -rw-r--r-- | arch/arm/mach-ixp2000/include/mach/ixp2000-regs.h | 457 |
1 files changed, 457 insertions, 0 deletions
diff --git a/arch/arm/mach-ixp2000/include/mach/ixp2000-regs.h b/arch/arm/mach-ixp2000/include/mach/ixp2000-regs.h new file mode 100644 index 000000000000..19d80379a3e3 --- /dev/null +++ b/arch/arm/mach-ixp2000/include/mach/ixp2000-regs.h @@ -0,0 +1,457 @@ +/* + * arch/arm/mach-ixp2000/include/mach/ixp2000-regs.h + * + * Chipset register definitions for IXP2400/2800 based systems. + * + * Original Author: Naeem Afzal <naeem.m.afzal@intel.com> + * + * Maintainer: Deepak Saxena <dsaxena@plexity.net> + * + * Copyright (C) 2002 Intel Corp. + * Copyright (C) 2003-2004 MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#ifndef _IXP2000_REGS_H_ +#define _IXP2000_REGS_H_ + +/* + * IXP2000 linux memory map: + * + * virt phys size + * fb000000 db000000 16M PCI CFG1 + * fc000000 da000000 16M PCI CFG0 + * fd000000 d8000000 16M PCI I/O + * fe[0-7]00000 8M per-platform mappings + * fe900000 80000000 1M SRAM #0 (first MB) + * fea00000 cb400000 1M SCRATCH ring get/put + * feb00000 c8000000 1M MSF + * fec00000 df000000 1M PCI CSRs + * fed00000 de000000 1M PCI CREG + * fee00000 d6000000 1M INTCTL + * fef00000 c0000000 1M CAP + */ + +/* + * Static I/O regions. + * + * Most of the registers are clumped in 4K regions spread throughout + * the 0xc0000000 -> 0xc0100000 address range, but we just map in + * the whole range using a single 1 MB section instead of small + * 4K pages. This has two advantages for us: + * + * 1) We use only one TLB entry for large number of on-chip I/O devices. + * + * 2) We can easily set the Section attributes to XCB=101 on the IXP2400 + * as required per erratum #66. We accomplish this by using a + * new MT_IXP2000_DEVICE memory type with the bits set as required. + * + * CAP stands for CSR Access Proxy. + * + * If you change the virtual address of this mapping, please propagate + * the change to arch/arm/kernel/debug.S, which hardcodes the virtual + * address of the UART located in this region. + */ + +#define IXP2000_CAP_PHYS_BASE 0xc0000000 +#define IXP2000_CAP_VIRT_BASE 0xfef00000 +#define IXP2000_CAP_SIZE 0x00100000 + +/* + * Addresses for specific on-chip peripherals. + */ +#define IXP2000_SLOWPORT_CSR_VIRT_BASE 0xfef80000 +#define IXP2000_GLOBAL_REG_VIRT_BASE 0xfef04000 +#define IXP2000_UART_PHYS_BASE 0xc0030000 +#define IXP2000_UART_VIRT_BASE 0xfef30000 +#define IXP2000_TIMER_VIRT_BASE 0xfef20000 +#define IXP2000_UENGINE_CSR_VIRT_BASE 0xfef18000 +#define IXP2000_GPIO_VIRT_BASE 0xfef10000 + +/* + * Devices outside of the 0xc0000000 -> 0xc0100000 range. The virtual + * addresses of the INTCTL and PCI_CSR mappings are hardcoded in + * entry-macro.S, so if you ever change these please propagate + * the change. + */ +#define IXP2000_INTCTL_PHYS_BASE 0xd6000000 +#define IXP2000_INTCTL_VIRT_BASE 0xfee00000 +#define IXP2000_INTCTL_SIZE 0x00100000 + +#define IXP2000_PCI_CREG_PHYS_BASE 0xde000000 +#define IXP2000_PCI_CREG_VIRT_BASE 0xfed00000 +#define IXP2000_PCI_CREG_SIZE 0x00100000 + +#define IXP2000_PCI_CSR_PHYS_BASE 0xdf000000 +#define IXP2000_PCI_CSR_VIRT_BASE 0xfec00000 +#define IXP2000_PCI_CSR_SIZE 0x00100000 + +#define IXP2000_MSF_PHYS_BASE 0xc8000000 +#define IXP2000_MSF_VIRT_BASE 0xfeb00000 +#define IXP2000_MSF_SIZE 0x00100000 + +#define IXP2000_SCRATCH_RING_PHYS_BASE 0xcb400000 +#define IXP2000_SCRATCH_RING_VIRT_BASE 0xfea00000 +#define IXP2000_SCRATCH_RING_SIZE 0x00100000 + +#define IXP2000_SRAM0_PHYS_BASE 0x80000000 +#define IXP2000_SRAM0_VIRT_BASE 0xfe900000 +#define IXP2000_SRAM0_SIZE 0x00100000 + +#define IXP2000_PCI_IO_PHYS_BASE 0xd8000000 +#define IXP2000_PCI_IO_VIRT_BASE 0xfd000000 +#define IXP2000_PCI_IO_SIZE 0x01000000 + +#define IXP2000_PCI_CFG0_PHYS_BASE 0xda000000 +#define IXP2000_PCI_CFG0_VIRT_BASE 0xfc000000 +#define IXP2000_PCI_CFG0_SIZE 0x01000000 + +#define IXP2000_PCI_CFG1_PHYS_BASE 0xdb000000 +#define IXP2000_PCI_CFG1_VIRT_BASE 0xfb000000 +#define IXP2000_PCI_CFG1_SIZE 0x01000000 + +/* + * Timers + */ +#define IXP2000_TIMER_REG(x) ((volatile unsigned long*)(IXP2000_TIMER_VIRT_BASE | (x))) +/* Timer control */ +#define IXP2000_T1_CTL IXP2000_TIMER_REG(0x00) +#define IXP2000_T2_CTL IXP2000_TIMER_REG(0x04) +#define IXP2000_T3_CTL IXP2000_TIMER_REG(0x08) +#define IXP2000_T4_CTL IXP2000_TIMER_REG(0x0c) +/* Store initial value */ +#define IXP2000_T1_CLD IXP2000_TIMER_REG(0x10) +#define IXP2000_T2_CLD IXP2000_TIMER_REG(0x14) +#define IXP2000_T3_CLD IXP2000_TIMER_REG(0x18) +#define IXP2000_T4_CLD IXP2000_TIMER_REG(0x1c) +/* Read current value */ +#define IXP2000_T1_CSR IXP2000_TIMER_REG(0x20) +#define IXP2000_T2_CSR IXP2000_TIMER_REG(0x24) +#define IXP2000_T3_CSR IXP2000_TIMER_REG(0x28) +#define IXP2000_T4_CSR IXP2000_TIMER_REG(0x2c) +/* Clear associated timer interrupt */ +#define IXP2000_T1_CLR IXP2000_TIMER_REG(0x30) +#define IXP2000_T2_CLR IXP2000_TIMER_REG(0x34) +#define IXP2000_T3_CLR IXP2000_TIMER_REG(0x38) +#define IXP2000_T4_CLR IXP2000_TIMER_REG(0x3c) +/* Timer watchdog enable for T4 */ +#define IXP2000_TWDE IXP2000_TIMER_REG(0x40) + +#define WDT_ENABLE 0x00000001 +#define TIMER_DIVIDER_256 0x00000008 +#define TIMER_ENABLE 0x00000080 +#define IRQ_MASK_TIMER1 (1 << 4) + +/* + * Interrupt controller registers + */ +#define IXP2000_INTCTL_REG(x) (volatile unsigned long*)(IXP2000_INTCTL_VIRT_BASE | (x)) +#define IXP2000_IRQ_STATUS IXP2000_INTCTL_REG(0x08) +#define IXP2000_IRQ_ENABLE IXP2000_INTCTL_REG(0x10) +#define IXP2000_IRQ_ENABLE_SET IXP2000_INTCTL_REG(0x10) +#define IXP2000_IRQ_ENABLE_CLR IXP2000_INTCTL_REG(0x18) +#define IXP2000_FIQ_ENABLE_CLR IXP2000_INTCTL_REG(0x14) +#define IXP2000_IRQ_ERR_STATUS IXP2000_INTCTL_REG(0x24) +#define IXP2000_IRQ_ERR_ENABLE_SET IXP2000_INTCTL_REG(0x2c) +#define IXP2000_FIQ_ERR_ENABLE_CLR IXP2000_INTCTL_REG(0x30) +#define IXP2000_IRQ_ERR_ENABLE_CLR IXP2000_INTCTL_REG(0x34) +#define IXP2000_IRQ_THD_RAW_STATUS_A_0 IXP2000_INTCTL_REG(0x60) +#define IXP2000_IRQ_THD_RAW_STATUS_A_1 IXP2000_INTCTL_REG(0x64) +#define IXP2000_IRQ_THD_RAW_STATUS_A_2 IXP2000_INTCTL_REG(0x68) +#define IXP2000_IRQ_THD_RAW_STATUS_A_3 IXP2000_INTCTL_REG(0x6c) +#define IXP2000_IRQ_THD_RAW_STATUS_B_0 IXP2000_INTCTL_REG(0x80) +#define IXP2000_IRQ_THD_RAW_STATUS_B_1 IXP2000_INTCTL_REG(0x84) +#define IXP2000_IRQ_THD_RAW_STATUS_B_2 IXP2000_INTCTL_REG(0x88) +#define IXP2000_IRQ_THD_RAW_STATUS_B_3 IXP2000_INTCTL_REG(0x8c) +#define IXP2000_IRQ_THD_STATUS_A_0 IXP2000_INTCTL_REG(0xe0) +#define IXP2000_IRQ_THD_STATUS_A_1 IXP2000_INTCTL_REG(0xe4) +#define IXP2000_IRQ_THD_STATUS_A_2 IXP2000_INTCTL_REG(0xe8) +#define IXP2000_IRQ_THD_STATUS_A_3 IXP2000_INTCTL_REG(0xec) +#define IXP2000_IRQ_THD_STATUS_B_0 IXP2000_INTCTL_REG(0x100) +#define IXP2000_IRQ_THD_STATUS_B_1 IXP2000_INTCTL_REG(0x104) +#define IXP2000_IRQ_THD_STATUS_B_2 IXP2000_INTCTL_REG(0x108) +#define IXP2000_IRQ_THD_STATUS_B_3 IXP2000_INTCTL_REG(0x10c) +#define IXP2000_IRQ_THD_ENABLE_SET_A_0 IXP2000_INTCTL_REG(0x160) +#define IXP2000_IRQ_THD_ENABLE_SET_A_1 IXP2000_INTCTL_REG(0x164) +#define IXP2000_IRQ_THD_ENABLE_SET_A_2 IXP2000_INTCTL_REG(0x168) +#define IXP2000_IRQ_THD_ENABLE_SET_A_3 IXP2000_INTCTL_REG(0x16c) +#define IXP2000_IRQ_THD_ENABLE_SET_B_0 IXP2000_INTCTL_REG(0x180) +#define IXP2000_IRQ_THD_ENABLE_SET_B_1 IXP2000_INTCTL_REG(0x184) +#define IXP2000_IRQ_THD_ENABLE_SET_B_2 IXP2000_INTCTL_REG(0x188) +#define IXP2000_IRQ_THD_ENABLE_SET_B_3 IXP2000_INTCTL_REG(0x18c) +#define IXP2000_IRQ_THD_ENABLE_CLEAR_A_0 IXP2000_INTCTL_REG(0x1e0) +#define IXP2000_IRQ_THD_ENABLE_CLEAR_A_1 IXP2000_INTCTL_REG(0x1e4) +#define IXP2000_IRQ_THD_ENABLE_CLEAR_A_2 IXP2000_INTCTL_REG(0x1e8) +#define IXP2000_IRQ_THD_ENABLE_CLEAR_A_3 IXP2000_INTCTL_REG(0x1ec) +#define IXP2000_IRQ_THD_ENABLE_CLEAR_B_0 IXP2000_INTCTL_REG(0x200) +#define IXP2000_IRQ_THD_ENABLE_CLEAR_B_1 IXP2000_INTCTL_REG(0x204) +#define IXP2000_IRQ_THD_ENABLE_CLEAR_B_2 IXP2000_INTCTL_REG(0x208) +#define IXP2000_IRQ_THD_ENABLE_CLEAR_B_3 IXP2000_INTCTL_REG(0x20c) + +/* + * Mask of valid IRQs in the 32-bit IRQ register. We use + * this to mark certain IRQs as being invalid. + */ +#define IXP2000_VALID_IRQ_MASK 0x0f0fffff + +/* + * PCI config register access from core + */ +#define IXP2000_PCI_CREG(x) (volatile unsigned long*)(IXP2000_PCI_CREG_VIRT_BASE | (x)) +#define IXP2000_PCI_CMDSTAT IXP2000_PCI_CREG(0x04) +#define IXP2000_PCI_CSR_BAR IXP2000_PCI_CREG(0x10) +#define IXP2000_PCI_SRAM_BAR IXP2000_PCI_CREG(0x14) +#define IXP2000_PCI_SDRAM_BAR IXP2000_PCI_CREG(0x18) + +/* + * PCI CSRs + */ +#define IXP2000_PCI_CSR(x) (volatile unsigned long*)(IXP2000_PCI_CSR_VIRT_BASE | (x)) + +/* + * PCI outbound interrupts + */ +#define IXP2000_PCI_OUT_INT_STATUS IXP2000_PCI_CSR(0x30) +#define IXP2000_PCI_OUT_INT_MASK IXP2000_PCI_CSR(0x34) +/* + * PCI communications + */ +#define IXP2000_PCI_MAILBOX0 IXP2000_PCI_CSR(0x50) +#define IXP2000_PCI_MAILBOX1 IXP2000_PCI_CSR(0x54) +#define IXP2000_PCI_MAILBOX2 IXP2000_PCI_CSR(0x58) +#define IXP2000_PCI_MAILBOX3 IXP2000_PCI_CSR(0x5C) +#define IXP2000_XSCALE_DOORBELL IXP2000_PCI_CSR(0x60) +#define IXP2000_XSCALE_DOORBELL_SETUP IXP2000_PCI_CSR(0x64) +#define IXP2000_PCI_DOORBELL IXP2000_PCI_CSR(0x70) +#define IXP2000_PCI_DOORBELL_SETUP IXP2000_PCI_CSR(0x74) + +/* + * DMA engines + */ +#define IXP2000_PCI_CH1_BYTE_CNT IXP2000_PCI_CSR(0x80) +#define IXP2000_PCI_CH1_ADDR IXP2000_PCI_CSR(0x84) +#define IXP2000_PCI_CH1_DRAM_ADDR IXP2000_PCI_CSR(0x88) +#define IXP2000_PCI_CH1_DESC_PTR IXP2000_PCI_CSR(0x8C) +#define IXP2000_PCI_CH1_CNTRL IXP2000_PCI_CSR(0x90) +#define IXP2000_PCI_CH1_ME_PARAM IXP2000_PCI_CSR(0x94) +#define IXP2000_PCI_CH2_BYTE_CNT IXP2000_PCI_CSR(0xA0) +#define IXP2000_PCI_CH2_ADDR IXP2000_PCI_CSR(0xA4) +#define IXP2000_PCI_CH2_DRAM_ADDR IXP2000_PCI_CSR(0xA8) +#define IXP2000_PCI_CH2_DESC_PTR IXP2000_PCI_CSR(0xAC) +#define IXP2000_PCI_CH2_CNTRL IXP2000_PCI_CSR(0xB0) +#define IXP2000_PCI_CH2_ME_PARAM IXP2000_PCI_CSR(0xB4) +#define IXP2000_PCI_CH3_BYTE_CNT IXP2000_PCI_CSR(0xC0) +#define IXP2000_PCI_CH3_ADDR IXP2000_PCI_CSR(0xC4) +#define IXP2000_PCI_CH3_DRAM_ADDR IXP2000_PCI_CSR(0xC8) +#define IXP2000_PCI_CH3_DESC_PTR IXP2000_PCI_CSR(0xCC) +#define IXP2000_PCI_CH3_CNTRL IXP2000_PCI_CSR(0xD0) +#define IXP2000_PCI_CH3_ME_PARAM IXP2000_PCI_CSR(0xD4) +#define IXP2000_DMA_INF_MODE IXP2000_PCI_CSR(0xE0) +/* + * Size masks for BARs + */ +#define IXP2000_PCI_SRAM_BASE_ADDR_MASK IXP2000_PCI_CSR(0xFC) +#define IXP2000_PCI_DRAM_BASE_ADDR_MASK IXP2000_PCI_CSR(0x100) +/* + * Control and uEngine related + */ +#define IXP2000_PCI_CONTROL IXP2000_PCI_CSR(0x13C) +#define IXP2000_PCI_ADDR_EXT IXP2000_PCI_CSR(0x140) +#define IXP2000_PCI_ME_PUSH_STATUS IXP2000_PCI_CSR(0x148) +#define IXP2000_PCI_ME_PUSH_EN IXP2000_PCI_CSR(0x14C) +#define IXP2000_PCI_ERR_STATUS IXP2000_PCI_CSR(0x150) +#define IXP2000_PCI_ERR_ENABLE IXP2000_PCI_CSR(0x154) +/* + * Inbound PCI interrupt control + */ +#define IXP2000_PCI_XSCALE_INT_STATUS IXP2000_PCI_CSR(0x158) +#define IXP2000_PCI_XSCALE_INT_ENABLE IXP2000_PCI_CSR(0x15C) + +#define IXP2000_PCICNTL_PNR (1<<17) /* PCI not Reset bit of PCI_CONTROL */ +#define IXP2000_PCICNTL_PCF (1<<28) /* PCI Central function bit */ +#define IXP2000_XSCALE_INT (1<<1) /* Interrupt from XScale to PCI */ + +/* These are from the IRQ register in the PCI ISR register */ +#define PCI_CONTROL_BE_DEO (1 << 22) /* Big Endian Data Enable Out */ +#define PCI_CONTROL_BE_DEI (1 << 21) /* Big Endian Data Enable In */ +#define PCI_CONTROL_BE_BEO (1 << 20) /* Big Endian Byte Enable Out */ +#define PCI_CONTROL_BE_BEI (1 << 19) /* Big Endian Byte Enable In */ +#define PCI_CONTROL_IEE (1 << 17) /* I/O cycle Endian swap Enable */ + +#define IXP2000_PCI_RST_REL (1 << 2) +#define CFG_RST_DIR (*IXP2000_PCI_CONTROL & IXP2000_PCICNTL_PCF) +#define CFG_PCI_BOOT_HOST (1 << 2) +#define CFG_BOOT_PROM (1 << 1) + +/* + * SlowPort CSRs + * + * The slowport is used to access things like flash, SONET framer control + * ports, slave microprocessors, CPLDs, and others of chip memory mapped + * peripherals. + */ +#define SLOWPORT_CSR(x) (volatile unsigned long*)(IXP2000_SLOWPORT_CSR_VIRT_BASE | (x)) + +#define IXP2000_SLOWPORT_CCR SLOWPORT_CSR(0x00) +#define IXP2000_SLOWPORT_WTC1 SLOWPORT_CSR(0x04) +#define IXP2000_SLOWPORT_WTC2 SLOWPORT_CSR(0x08) +#define IXP2000_SLOWPORT_RTC1 SLOWPORT_CSR(0x0c) +#define IXP2000_SLOWPORT_RTC2 SLOWPORT_CSR(0x10) +#define IXP2000_SLOWPORT_FSR SLOWPORT_CSR(0x14) +#define IXP2000_SLOWPORT_PCR SLOWPORT_CSR(0x18) +#define IXP2000_SLOWPORT_ADC SLOWPORT_CSR(0x1C) +#define IXP2000_SLOWPORT_FAC SLOWPORT_CSR(0x20) +#define IXP2000_SLOWPORT_FRM SLOWPORT_CSR(0x24) +#define IXP2000_SLOWPORT_FIN SLOWPORT_CSR(0x28) + +/* + * CCR values. + * The CCR configures the clock division for the slowport interface. + */ +#define SLOWPORT_CCR_DIV_1 0x00 +#define SLOWPORT_CCR_DIV_2 0x01 +#define SLOWPORT_CCR_DIV_4 0x02 +#define SLOWPORT_CCR_DIV_6 0x03 +#define SLOWPORT_CCR_DIV_8 0x04 +#define SLOWPORT_CCR_DIV_10 0x05 +#define SLOWPORT_CCR_DIV_12 0x06 +#define SLOWPORT_CCR_DIV_14 0x07 +#define SLOWPORT_CCR_DIV_16 0x08 +#define SLOWPORT_CCR_DIV_18 0x09 +#define SLOWPORT_CCR_DIV_20 0x0a +#define SLOWPORT_CCR_DIV_22 0x0b +#define SLOWPORT_CCR_DIV_24 0x0c +#define SLOWPORT_CCR_DIV_26 0x0d +#define SLOWPORT_CCR_DIV_28 0x0e +#define SLOWPORT_CCR_DIV_30 0x0f + +/* + * PCR values. PCR configure the mode of the interface. + */ +#define SLOWPORT_MODE_FLASH 0x00 +#define SLOWPORT_MODE_LUCENT 0x01 +#define SLOWPORT_MODE_PMC_SIERRA 0x02 +#define SLOWPORT_MODE_INTEL_UP 0x03 +#define SLOWPORT_MODE_MOTOROLA_UP 0x04 + +/* + * ADC values. Defines data and address bus widths. + */ +#define SLOWPORT_ADDR_WIDTH_8 0x00 +#define SLOWPORT_ADDR_WIDTH_16 0x01 +#define SLOWPORT_ADDR_WIDTH_24 0x02 +#define SLOWPORT_ADDR_WIDTH_32 0x03 +#define SLOWPORT_DATA_WIDTH_8 0x00 +#define SLOWPORT_DATA_WIDTH_16 0x10 +#define SLOWPORT_DATA_WIDTH_24 0x20 +#define SLOWPORT_DATA_WIDTH_32 0x30 + +/* + * Masks and shifts for various fields in the WTC and RTC registers. + */ +#define SLOWPORT_WRTC_MASK_HD 0x0003 +#define SLOWPORT_WRTC_MASK_PW 0x003c +#define SLOWPORT_WRTC_MASK_SU 0x03c0 + +#define SLOWPORT_WRTC_SHIFT_HD 0x00 +#define SLOWPORT_WRTC_SHIFT_SU 0x02 +#define SLOWPORT_WRTC_SHFIT_PW 0x06 + + +/* + * GPIO registers & GPIO interface. + */ +#define IXP2000_GPIO_REG(x) ((volatile unsigned long*)(IXP2000_GPIO_VIRT_BASE+(x))) +#define IXP2000_GPIO_PLR IXP2000_GPIO_REG(0x00) +#define IXP2000_GPIO_PDPR IXP2000_GPIO_REG(0x04) +#define IXP2000_GPIO_PDSR IXP2000_GPIO_REG(0x08) +#define IXP2000_GPIO_PDCR IXP2000_GPIO_REG(0x0c) +#define IXP2000_GPIO_POPR IXP2000_GPIO_REG(0x10) +#define IXP2000_GPIO_POSR IXP2000_GPIO_REG(0x14) +#define IXP2000_GPIO_POCR IXP2000_GPIO_REG(0x18) +#define IXP2000_GPIO_REDR IXP2000_GPIO_REG(0x1c) +#define IXP2000_GPIO_FEDR IXP2000_GPIO_REG(0x20) +#define IXP2000_GPIO_EDSR IXP2000_GPIO_REG(0x24) +#define IXP2000_GPIO_LSHR IXP2000_GPIO_REG(0x28) +#define IXP2000_GPIO_LSLR IXP2000_GPIO_REG(0x2c) +#define IXP2000_GPIO_LDSR IXP2000_GPIO_REG(0x30) +#define IXP2000_GPIO_INER IXP2000_GPIO_REG(0x34) +#define IXP2000_GPIO_INSR IXP2000_GPIO_REG(0x38) +#define IXP2000_GPIO_INCR IXP2000_GPIO_REG(0x3c) +#define IXP2000_GPIO_INST IXP2000_GPIO_REG(0x40) + +/* + * "Global" registers...whatever that's supposed to mean. + */ +#define GLOBAL_REG_BASE (IXP2000_GLOBAL_REG_VIRT_BASE + 0x0a00) +#define GLOBAL_REG(x) (volatile unsigned long*)(GLOBAL_REG_BASE | (x)) + +#define IXP2000_MAJ_PROD_TYPE_MASK 0x001F0000 +#define IXP2000_MAJ_PROD_TYPE_IXP2000 0x00000000 +#define IXP2000_MIN_PROD_TYPE_MASK 0x0000FF00 +#define IXP2000_MIN_PROD_TYPE_IXP2400 0x00000200 +#define IXP2000_MIN_PROD_TYPE_IXP2850 0x00000100 +#define IXP2000_MIN_PROD_TYPE_IXP2800 0x00000000 +#define IXP2000_MAJ_REV_MASK 0x000000F0 +#define IXP2000_MIN_REV_MASK 0x0000000F +#define IXP2000_PROD_ID_MASK 0xFFFFFFFF + +#define IXP2000_PRODUCT_ID GLOBAL_REG(0x00) +#define IXP2000_MISC_CONTROL GLOBAL_REG(0x04) +#define IXP2000_MSF_CLK_CNTRL GLOBAL_REG(0x08) +#define IXP2000_RESET0 GLOBAL_REG(0x0c) +#define IXP2000_RESET1 GLOBAL_REG(0x10) +#define IXP2000_CCR GLOBAL_REG(0x14) +#define IXP2000_STRAP_OPTIONS GLOBAL_REG(0x18) + +#define RSTALL (1 << 16) +#define WDT_RESET_ENABLE 0x01000000 + + +/* + * MSF registers. The IXP2400 and IXP2800 have somewhat different MSF + * units, but the registers that differ between the two don't overlap, + * so we can have one register list for both. + */ +#define IXP2000_MSF_REG(x) ((volatile unsigned long*)(IXP2000_MSF_VIRT_BASE + (x))) +#define IXP2000_MSF_RX_CONTROL IXP2000_MSF_REG(0x0000) +#define IXP2000_MSF_TX_CONTROL IXP2000_MSF_REG(0x0004) +#define IXP2000_MSF_INTERRUPT_STATUS IXP2000_MSF_REG(0x0008) +#define IXP2000_MSF_INTERRUPT_ENABLE IXP2000_MSF_REG(0x000c) +#define IXP2000_MSF_CSIX_TYPE_MAP IXP2000_MSF_REG(0x0010) +#define IXP2000_MSF_FC_EGRESS_STATUS IXP2000_MSF_REG(0x0014) +#define IXP2000_MSF_FC_INGRESS_STATUS IXP2000_MSF_REG(0x0018) +#define IXP2000_MSF_HWM_CONTROL IXP2000_MSF_REG(0x0024) +#define IXP2000_MSF_FC_STATUS_OVERRIDE IXP2000_MSF_REG(0x0028) +#define IXP2000_MSF_CLOCK_CONTROL IXP2000_MSF_REG(0x002c) +#define IXP2000_MSF_RX_PORT_MAP IXP2000_MSF_REG(0x0040) +#define IXP2000_MSF_RBUF_ELEMENT_DONE IXP2000_MSF_REG(0x0044) +#define IXP2000_MSF_RX_MPHY_POLL_LIMIT IXP2000_MSF_REG(0x0048) +#define IXP2000_MSF_RX_CALENDAR_LENGTH IXP2000_MSF_REG(0x0048) +#define IXP2000_MSF_RX_THREAD_FREELIST_TIMEOUT_0 IXP2000_MSF_REG(0x0050) +#define IXP2000_MSF_RX_THREAD_FREELIST_TIMEOUT_1 IXP2000_MSF_REG(0x0054) +#define IXP2000_MSF_RX_THREAD_FREELIST_TIMEOUT_2 IXP2000_MSF_REG(0x0058) +#define IXP2000_MSF_TX_SEQUENCE_0 IXP2000_MSF_REG(0x0060) +#define IXP2000_MSF_TX_SEQUENCE_1 IXP2000_MSF_REG(0x0064) +#define IXP2000_MSF_TX_SEQUENCE_2 IXP2000_MSF_REG(0x0068) +#define IXP2000_MSF_TX_MPHY_POLL_LIMIT IXP2000_MSF_REG(0x0070) +#define IXP2000_MSF_TX_CALENDAR_LENGTH IXP2000_MSF_REG(0x0070) +#define IXP2000_MSF_RX_UP_CONTROL_0 IXP2000_MSF_REG(0x0080) +#define IXP2000_MSF_RX_UP_CONTROL_1 IXP2000_MSF_REG(0x0084) +#define IXP2000_MSF_RX_UP_CONTROL_2 IXP2000_MSF_REG(0x0088) +#define IXP2000_MSF_RX_UP_CONTROL_3 IXP2000_MSF_REG(0x008c) +#define IXP2000_MSF_TX_UP_CONTROL_0 IXP2000_MSF_REG(0x0090) +#define IXP2000_MSF_TX_UP_CONTROL_1 IXP2000_MSF_REG(0x0094) +#define IXP2000_MSF_TX_UP_CONTROL_2 IXP2000_MSF_REG(0x0098) +#define IXP2000_MSF_TX_UP_CONTROL_3 IXP2000_MSF_REG(0x009c) +#define IXP2000_MSF_TRAIN_DATA IXP2000_MSF_REG(0x00a0) +#define IXP2000_MSF_TRAIN_CALENDAR IXP2000_MSF_REG(0x00a4) +#define IXP2000_MSF_TRAIN_FLOW_CONTROL IXP2000_MSF_REG(0x00a8) +#define IXP2000_MSF_TX_CALENDAR_0 IXP2000_MSF_REG(0x1000) +#define IXP2000_MSF_RX_PORT_CALENDAR_STATUS IXP2000_MSF_REG(0x1400) + + +#endif /* _IXP2000_H_ */ |
