diff options
Diffstat (limited to 'arch/arm/mach-bcmring/include/csp/dmacHw.h')
| -rw-r--r-- | arch/arm/mach-bcmring/include/csp/dmacHw.h | 596 |
1 files changed, 596 insertions, 0 deletions
diff --git a/arch/arm/mach-bcmring/include/csp/dmacHw.h b/arch/arm/mach-bcmring/include/csp/dmacHw.h new file mode 100644 index 000000000000..5d510130a25f --- /dev/null +++ b/arch/arm/mach-bcmring/include/csp/dmacHw.h @@ -0,0 +1,596 @@ +/***************************************************************************** +* Copyright 2004 - 2008 Broadcom Corporation. All rights reserved. +* +* Unless you and Broadcom execute a separate written software license +* agreement governing use of this software, this software is licensed to you +* under the terms of the GNU General Public License version 2, available at +* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). +* +* Notwithstanding the above, under no circumstances may you combine this +* software in any way with any other Broadcom software provided under a +* license other than the GPL, without Broadcom's express prior written +* consent. +*****************************************************************************/ + +/****************************************************************************/ +/** +* @file dmacHw.h +* +* @brief API definitions for low level DMA controller driver +* +*/ +/****************************************************************************/ +#ifndef _DMACHW_H +#define _DMACHW_H + +#include <stddef.h> + +#include <csp/stdint.h> +#include <mach/csp/dmacHw_reg.h> + +/* Define DMA Channel ID using DMA controller number (m) and channel number (c). + + System specific channel ID should be defined as follows + + For example: + + #include <dmacHw.h> + ... + #define systemHw_LCD_CHANNEL_ID dmacHw_MAKE_CHANNEL_ID(0,5) + #define systemHw_SWITCH_RX_CHANNEL_ID dmacHw_MAKE_CHANNEL_ID(0,0) + #define systemHw_SWITCH_TX_CHANNEL_ID dmacHw_MAKE_CHANNEL_ID(0,1) + #define systemHw_APM_RX_CHANNEL_ID dmacHw_MAKE_CHANNEL_ID(0,3) + #define systemHw_APM_TX_CHANNEL_ID dmacHw_MAKE_CHANNEL_ID(0,4) + ... + #define systemHw_SHARED1_CHANNEL_ID dmacHw_MAKE_CHANNEL_ID(1,4) + #define systemHw_SHARED2_CHANNEL_ID dmacHw_MAKE_CHANNEL_ID(1,5) + #define systemHw_SHARED3_CHANNEL_ID dmacHw_MAKE_CHANNEL_ID(0,6) + ... +*/ +#define dmacHw_MAKE_CHANNEL_ID(m, c) (m << 8 | c) + +typedef enum { + dmacHw_CHANNEL_PRIORITY_0 = dmacHw_REG_CFG_LO_CH_PRIORITY_0, /* Channel priority 0. Lowest priority DMA channel */ + dmacHw_CHANNEL_PRIORITY_1 = dmacHw_REG_CFG_LO_CH_PRIORITY_1, /* Channel priority 1 */ + dmacHw_CHANNEL_PRIORITY_2 = dmacHw_REG_CFG_LO_CH_PRIORITY_2, /* Channel priority 2 */ + dmacHw_CHANNEL_PRIORITY_3 = dmacHw_REG_CFG_LO_CH_PRIORITY_3, /* Channel priority 3 */ + dmacHw_CHANNEL_PRIORITY_4 = dmacHw_REG_CFG_LO_CH_PRIORITY_4, /* Channel priority 4 */ + dmacHw_CHANNEL_PRIORITY_5 = dmacHw_REG_CFG_LO_CH_PRIORITY_5, /* Channel priority 5 */ + dmacHw_CHANNEL_PRIORITY_6 = dmacHw_REG_CFG_LO_CH_PRIORITY_6, /* Channel priority 6 */ + dmacHw_CHANNEL_PRIORITY_7 = dmacHw_REG_CFG_LO_CH_PRIORITY_7 /* Channel priority 7. Highest priority DMA channel */ +} dmacHw_CHANNEL_PRIORITY_e; + +/* Source destination master interface */ +typedef enum { + dmacHw_SRC_MASTER_INTERFACE_1 = dmacHw_REG_CTL_SMS_1, /* Source DMA master interface 1 */ + dmacHw_SRC_MASTER_INTERFACE_2 = dmacHw_REG_CTL_SMS_2, /* Source DMA master interface 2 */ + dmacHw_DST_MASTER_INTERFACE_1 = dmacHw_REG_CTL_DMS_1, /* Destination DMA master interface 1 */ + dmacHw_DST_MASTER_INTERFACE_2 = dmacHw_REG_CTL_DMS_2 /* Destination DMA master interface 2 */ +} dmacHw_MASTER_INTERFACE_e; + +typedef enum { + dmacHw_SRC_TRANSACTION_WIDTH_8 = dmacHw_REG_CTL_SRC_TR_WIDTH_8, /* Source 8 bit (1 byte) per transaction */ + dmacHw_SRC_TRANSACTION_WIDTH_16 = dmacHw_REG_CTL_SRC_TR_WIDTH_16, /* Source 16 bit (2 byte) per transaction */ + dmacHw_SRC_TRANSACTION_WIDTH_32 = dmacHw_REG_CTL_SRC_TR_WIDTH_32, /* Source 32 bit (4 byte) per transaction */ + dmacHw_SRC_TRANSACTION_WIDTH_64 = dmacHw_REG_CTL_SRC_TR_WIDTH_64, /* Source 64 bit (8 byte) per transaction */ + dmacHw_DST_TRANSACTION_WIDTH_8 = dmacHw_REG_CTL_DST_TR_WIDTH_8, /* Destination 8 bit (1 byte) per transaction */ + dmacHw_DST_TRANSACTION_WIDTH_16 = dmacHw_REG_CTL_DST_TR_WIDTH_16, /* Destination 16 bit (2 byte) per transaction */ + dmacHw_DST_TRANSACTION_WIDTH_32 = dmacHw_REG_CTL_DST_TR_WIDTH_32, /* Destination 32 bit (4 byte) per transaction */ + dmacHw_DST_TRANSACTION_WIDTH_64 = dmacHw_REG_CTL_DST_TR_WIDTH_64 /* Destination 64 bit (8 byte) per transaction */ +} dmacHw_TRANSACTION_WIDTH_e; + +typedef enum { + dmacHw_SRC_BURST_WIDTH_0 = dmacHw_REG_CTL_SRC_MSIZE_0, /* Source No burst */ + dmacHw_SRC_BURST_WIDTH_4 = dmacHw_REG_CTL_SRC_MSIZE_4, /* Source 4 X dmacHw_TRANSACTION_WIDTH_xxx bytes per burst */ + dmacHw_SRC_BURST_WIDTH_8 = dmacHw_REG_CTL_SRC_MSIZE_8, /* Source 8 X dmacHw_TRANSACTION_WIDTH_xxx bytes per burst */ + dmacHw_SRC_BURST_WIDTH_16 = dmacHw_REG_CTL_SRC_MSIZE_16, /* Source 16 X dmacHw_TRANSACTION_WIDTH_xxx bytes per burst */ + dmacHw_DST_BURST_WIDTH_0 = dmacHw_REG_CTL_DST_MSIZE_0, /* Destination No burst */ + dmacHw_DST_BURST_WIDTH_4 = dmacHw_REG_CTL_DST_MSIZE_4, /* Destination 4 X dmacHw_TRANSACTION_WIDTH_xxx bytes per burst */ + dmacHw_DST_BURST_WIDTH_8 = dmacHw_REG_CTL_DST_MSIZE_8, /* Destination 8 X dmacHw_TRANSACTION_WIDTH_xxx bytes per burst */ + dmacHw_DST_BURST_WIDTH_16 = dmacHw_REG_CTL_DST_MSIZE_16 /* Destination 16 X dmacHw_TRANSACTION_WIDTH_xxx bytes per burst */ +} dmacHw_BURST_WIDTH_e; + +typedef enum { + dmacHw_TRANSFER_TYPE_MEM_TO_MEM = dmacHw_REG_CTL_TTFC_MM_DMAC, /* Memory to memory transfer */ + dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM = dmacHw_REG_CTL_TTFC_PM_DMAC, /* Peripheral to memory transfer */ + dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL = dmacHw_REG_CTL_TTFC_MP_DMAC, /* Memory to peripheral transfer */ + dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_PERIPHERAL = dmacHw_REG_CTL_TTFC_PP_DMAC /* Peripheral to peripheral transfer */ +} dmacHw_TRANSFER_TYPE_e; + +typedef enum { + dmacHw_TRANSFER_MODE_PERREQUEST, /* Block transfer per DMA request */ + dmacHw_TRANSFER_MODE_CONTINUOUS, /* Continuous transfer of streaming data */ + dmacHw_TRANSFER_MODE_PERIODIC /* Periodic transfer of streaming data */ +} dmacHw_TRANSFER_MODE_e; + +typedef enum { + dmacHw_SRC_ADDRESS_UPDATE_MODE_INC = dmacHw_REG_CTL_SINC_INC, /* Increment source address after every transaction */ + dmacHw_SRC_ADDRESS_UPDATE_MODE_DEC = dmacHw_REG_CTL_SINC_DEC, /* Decrement source address after every transaction */ + dmacHw_DST_ADDRESS_UPDATE_MODE_INC = dmacHw_REG_CTL_DINC_INC, /* Increment destination address after every transaction */ + dmacHw_DST_ADDRESS_UPDATE_MODE_DEC = dmacHw_REG_CTL_DINC_DEC, /* Decrement destination address after every transaction */ + dmacHw_SRC_ADDRESS_UPDATE_MODE_NC = dmacHw_REG_CTL_SINC_NC, /* No change in source address after every transaction */ + dmacHw_DST_ADDRESS_UPDATE_MODE_NC = dmacHw_REG_CTL_DINC_NC /* No change in destination address after every transaction */ +} dmacHw_ADDRESS_UPDATE_MODE_e; + +typedef enum { + dmacHw_FLOW_CONTROL_DMA, /* DMA working as flow controller (default) */ + dmacHw_FLOW_CONTROL_PERIPHERAL /* Peripheral working as flow controller */ +} dmacHw_FLOW_CONTROL_e; + +typedef enum { + dmacHw_TRANSFER_STATUS_BUSY, /* DMA Transfer ongoing */ + dmacHw_TRANSFER_STATUS_DONE, /* DMA Transfer completed */ + dmacHw_TRANSFER_STATUS_ERROR /* DMA Transfer error */ +} dmacHw_TRANSFER_STATUS_e; + +typedef enum { + dmacHw_INTERRUPT_DISABLE, /* Interrupt disable */ + dmacHw_INTERRUPT_ENABLE /* Interrupt enable */ +} dmacHw_INTERRUPT_e; + +typedef enum { + dmacHw_INTERRUPT_STATUS_NONE = 0x0, /* No DMA interrupt */ + dmacHw_INTERRUPT_STATUS_TRANS = 0x1, /* End of DMA transfer interrupt */ + dmacHw_INTERRUPT_STATUS_BLOCK = 0x2, /* End of block transfer interrupt */ + dmacHw_INTERRUPT_STATUS_ERROR = 0x4 /* Error interrupt */ +} dmacHw_INTERRUPT_STATUS_e; + +typedef enum { + dmacHw_CONTROLLER_ATTRIB_CHANNEL_NUM, /* Number of DMA channel */ + dmacHw_CONTROLLER_ATTRIB_CHANNEL_MAX_BLOCK_SIZE, /* Maximum channel burst size */ + dmacHw_CONTROLLER_ATTRIB_MASTER_INTF_NUM, /* Number of DMA master interface */ + dmacHw_CONTROLLER_ATTRIB_CHANNEL_BUS_WIDTH, /* Channel Data bus width */ + dmacHw_CONTROLLER_ATTRIB_CHANNEL_FIFO_SIZE /* Channel FIFO size */ +} dmacHw_CONTROLLER_ATTRIB_e; + +typedef unsigned long dmacHw_HANDLE_t; /* DMA channel handle */ +typedef uint32_t dmacHw_ID_t; /* DMA channel Id. Must be created using + "dmacHw_MAKE_CHANNEL_ID" macro + */ +/* DMA channel configuration parameters */ +typedef struct { + uint32_t srcPeripheralPort; /* Source peripheral port */ + uint32_t dstPeripheralPort; /* Destination peripheral port */ + uint32_t srcStatusRegisterAddress; /* Source status register address */ + uint32_t dstStatusRegisterAddress; /* Destination status register address of type */ + + uint32_t srcGatherWidth; /* Number of bytes gathered before successive gather opearation */ + uint32_t srcGatherJump; /* Number of bytes jumpped before successive gather opearation */ + uint32_t dstScatterWidth; /* Number of bytes sacattered before successive scatter opearation */ + uint32_t dstScatterJump; /* Number of bytes jumpped before successive scatter opearation */ + uint32_t maxDataPerBlock; /* Maximum number of bytes to be transferred per block/descrptor. + 0 = Maximum possible. + */ + + dmacHw_ADDRESS_UPDATE_MODE_e srcUpdate; /* Source address update mode */ + dmacHw_ADDRESS_UPDATE_MODE_e dstUpdate; /* Destination address update mode */ + dmacHw_TRANSFER_TYPE_e transferType; /* DMA transfer type */ + dmacHw_TRANSFER_MODE_e transferMode; /* DMA transfer mode */ + dmacHw_MASTER_INTERFACE_e srcMasterInterface; /* DMA source interface */ + dmacHw_MASTER_INTERFACE_e dstMasterInterface; /* DMA destination interface */ + dmacHw_TRANSACTION_WIDTH_e srcMaxTransactionWidth; /* Source transaction width */ + dmacHw_TRANSACTION_WIDTH_e dstMaxTransactionWidth; /* Destination transaction width */ + dmacHw_BURST_WIDTH_e srcMaxBurstWidth; /* Source burst width */ + dmacHw_BURST_WIDTH_e dstMaxBurstWidth; /* Destination burst width */ + dmacHw_INTERRUPT_e blockTransferInterrupt; /* Block trsnafer interrupt */ + dmacHw_INTERRUPT_e completeTransferInterrupt; /* Complete DMA trsnafer interrupt */ + dmacHw_INTERRUPT_e errorInterrupt; /* Error interrupt */ + dmacHw_CHANNEL_PRIORITY_e channelPriority; /* Channel priority */ + dmacHw_FLOW_CONTROL_e flowControler; /* Data flow controller */ +} dmacHw_CONFIG_t; + +/****************************************************************************/ +/** +* @brief Initializes DMA +* +* This function initializes DMA CSP driver +* +* @note +* Must be called before using any DMA channel +*/ +/****************************************************************************/ +void dmacHw_initDma(void); + +/****************************************************************************/ +/** +* @brief Exit function for DMA +* +* This function isolates DMA from the system +* +*/ +/****************************************************************************/ +void dmacHw_exitDma(void); + +/****************************************************************************/ +/** +* @brief Gets a handle to a DMA channel +* +* This function returns a handle, representing a control block of a particular DMA channel +* +* @return -1 - On Failure +* handle - On Success, representing a channel control block +* +* @note +* None Channel ID must be created using "dmacHw_MAKE_CHANNEL_ID" macro +*/ +/****************************************************************************/ +dmacHw_HANDLE_t dmacHw_getChannelHandle(dmacHw_ID_t channelId /* [ IN ] DMA Channel Id */ + ); + +/****************************************************************************/ +/** +* @brief Initializes a DMA channel for use +* +* This function initializes and resets a DMA channel for use +* +* @return -1 - On Failure +* 0 - On Success +* +* @note +* None +*/ +/****************************************************************************/ +int dmacHw_initChannel(dmacHw_HANDLE_t handle /* [ IN ] DMA Channel handle */ + ); + +/****************************************************************************/ +/** +* @brief Estimates number of descriptor needed to perform certain DMA transfer +* +* +* @return On failure : -1 +* On success : Number of descriptor count +* +* +*/ +/****************************************************************************/ +int dmacHw_calculateDescriptorCount(dmacHw_CONFIG_t *pConfig, /* [ IN ] Configuration settings */ + void *pSrcAddr, /* [ IN ] Source (Peripheral/Memory) address */ + void *pDstAddr, /* [ IN ] Destination (Peripheral/Memory) address */ + size_t dataLen /* [ IN ] Data length in bytes */ + ); + +/****************************************************************************/ +/** +* @brief Initializes descriptor ring +* +* This function will initializes the descriptor ring of a DMA channel +* +* +* @return -1 - On failure +* 0 - On success +* @note +* - "len" parameter should be obtained from "dmacHw_descriptorLen" +* - Descriptor buffer MUST be 32 bit aligned and uncached as it +* is accessed by ARM and DMA +*/ +/****************************************************************************/ +int dmacHw_initDescriptor(void *pDescriptorVirt, /* [ IN ] Virtual address of uncahced buffer allocated to form descriptor ring */ + uint32_t descriptorPhyAddr, /* [ IN ] Physical address of pDescriptorVirt (descriptor buffer) */ + uint32_t len, /* [ IN ] Size of the pBuf */ + uint32_t num /* [ IN ] Number of descriptor in the ring */ + ); + +/****************************************************************************/ +/** +* @brief Finds amount of memory required to form a descriptor ring +* +* +* @return Number of bytes required to form a descriptor ring +* +* +* @note +* None +*/ +/****************************************************************************/ +uint32_t dmacHw_descriptorLen(uint32_t descCnt /* [ IN ] Number of descriptor in the ring */ + ); + +/****************************************************************************/ +/** +* @brief Configure DMA channel +* +* @return 0 : On success +* -1 : On failure +*/ +/****************************************************************************/ +int dmacHw_configChannel(dmacHw_HANDLE_t handle, /* [ IN ] DMA Channel handle */ + dmacHw_CONFIG_t *pConfig /* [ IN ] Configuration settings */ + ); + +/****************************************************************************/ +/** +* @brief Set descriptors for known data length +* +* When DMA has to work as a flow controller, this function prepares the +* descriptor chain to transfer data +* +* from: +* - Memory to memory +* - Peripheral to memory +* - Memory to Peripheral +* - Peripheral to Peripheral +* +* @return -1 - On failure +* 0 - On success +* +*/ +/****************************************************************************/ +int dmacHw_setDataDescriptor(dmacHw_CONFIG_t *pConfig, /* [ IN ] Configuration settings */ + void *pDescriptor, /* [ IN ] Descriptor buffer */ + void *pSrcAddr, /* [ IN ] Source (Peripheral/Memory) address */ + void *pDstAddr, /* [ IN ] Destination (Peripheral/Memory) address */ + size_t dataLen /* [ IN ] Length in bytes */ + ); + +/****************************************************************************/ +/** +* @brief Indicates whether DMA transfer is in progress or completed +* +* @return DMA transfer status +* dmacHw_TRANSFER_STATUS_BUSY: DMA Transfer ongoing +* dmacHw_TRANSFER_STATUS_DONE: DMA Transfer completed +* dmacHw_TRANSFER_STATUS_ERROR: DMA Transfer error +* +*/ +/****************************************************************************/ +dmacHw_TRANSFER_STATUS_e dmacHw_transferCompleted(dmacHw_HANDLE_t handle /* [ IN ] DMA Channel handle */ + ); + +/****************************************************************************/ +/** +* @brief Set descriptor carrying control information +* +* This function will be used to send specific control information to the device +* using the DMA channel +* +* +* @return -1 - On failure +* 0 - On success +* +* @note +* None +*/ +/****************************************************************************/ +int dmacHw_setControlDescriptor(dmacHw_CONFIG_t *pConfig, /* [ IN ] Configuration settings */ + void *pDescriptor, /* [ IN ] Descriptor buffer */ + uint32_t ctlAddress, /* [ IN ] Address of the device control register */ + uint32_t control /* [ IN ] Device control information */ + ); + +/****************************************************************************/ +/** +* @brief Read data DMA transferred to memory +* +* This function will read data that has been DMAed to memory while transfering from: +* - Memory to memory +* - Peripheral to memory +* +* @return 0 - No more data is available to read +* 1 - More data might be available to read +* +*/ +/****************************************************************************/ +int dmacHw_readTransferredData(dmacHw_HANDLE_t handle, /* [ IN ] DMA Channel handle */ + dmacHw_CONFIG_t *pConfig, /* [ IN ] Configuration settings */ + void *pDescriptor, /* [ IN ] Descriptor buffer */ + void **ppBbuf, /* [ OUT ] Data received */ + size_t *pLlen /* [ OUT ] Length of the data received */ + ); + +/****************************************************************************/ +/** +* @brief Prepares descriptor ring, when source peripheral working as a flow controller +* +* This function will form the descriptor ring by allocating buffers, when source peripheral +* has to work as a flow controller to transfer data from: +* - Peripheral to memory. +* +* @return -1 - On failure +* 0 - On success +* +* +* @note +* None +*/ +/****************************************************************************/ +int dmacHw_setVariableDataDescriptor(dmacHw_HANDLE_t handle, /* [ IN ] DMA Channel handle */ + dmacHw_CONFIG_t *pConfig, /* [ IN ] Configuration settings */ + void *pDescriptor, /* [ IN ] Descriptor buffer */ + uint32_t srcAddr, /* [ IN ] Source peripheral address */ + void *(*fpAlloc) (int len), /* [ IN ] Function pointer that provides destination memory */ + int len, /* [ IN ] Number of bytes "fpAlloc" will allocate for destination */ + int num /* [ IN ] Number of descriptor to set */ + ); + +/****************************************************************************/ +/** +* @brief Program channel register to initiate transfer +* +* @return void +* +* +* @note +* - Descriptor buffer MUST ALWAYS be flushed before calling this function +* - This function should also be called from ISR to program the channel with +* pending descriptors +*/ +/****************************************************************************/ +void dmacHw_initiateTransfer(dmacHw_HANDLE_t handle, /* [ IN ] DMA Channel handle */ + dmacHw_CONFIG_t *pConfig, /* [ IN ] Configuration settings */ + void *pDescriptor /* [ IN ] Descriptor buffer */ + ); + +/****************************************************************************/ +/** +* @brief Resets descriptor control information +* +* @return void +*/ +/****************************************************************************/ +void dmacHw_resetDescriptorControl(void *pDescriptor /* [ IN ] Descriptor buffer */ + ); + +/****************************************************************************/ +/** +* @brief Program channel register to stop transfer +* +* Ensures the channel is not doing any transfer after calling this function +* +* @return void +* +*/ +/****************************************************************************/ +void dmacHw_stopTransfer(dmacHw_HANDLE_t handle /* [ IN ] DMA Channel handle */ + ); + +/****************************************************************************/ +/** +* @brief Check the existance of pending descriptor +* +* This function confirmes if there is any pending descriptor in the chain +* to program the channel +* +* @return 1 : Channel need to be programmed with pending descriptor +* 0 : No more pending descriptor to programe the channel +* +* @note +* - This function should be called from ISR in case there are pending +* descriptor to program the channel. +* +* Example: +* +* dmac_isr () +* { +* ... +* if (dmacHw_descriptorPending (handle)) +* { +* dmacHw_initiateTransfer (handle); +* } +* } +* +*/ +/****************************************************************************/ +uint32_t dmacHw_descriptorPending(dmacHw_HANDLE_t handle, /* [ IN ] DMA Channel handle */ + void *pDescriptor /* [ IN ] Descriptor buffer */ + ); + +/****************************************************************************/ +/** +* @brief Deallocates source or destination memory, allocated +* +* This function can be called to deallocate data memory that was DMAed successfully +* +* @return -1 - On failure +* 0 - On success +* +* @note +* This function will be called ONLY, when source OR destination address is pointing +* to dynamic memory +*/ +/****************************************************************************/ +int dmacHw_freeMem(dmacHw_CONFIG_t *pConfig, /* [ IN ] Configuration settings */ + void *pDescriptor, /* [ IN ] Descriptor buffer */ + void (*fpFree) (void *) /* [ IN ] Function pointer to free data memory */ + ); + +/****************************************************************************/ +/** +* @brief Clears the interrupt +* +* This function clears the DMA channel specific interrupt +* +* @return N/A +* +* @note +* Must be called under the context of ISR +*/ +/****************************************************************************/ +void dmacHw_clearInterrupt(dmacHw_HANDLE_t handle /* [ IN ] DMA Channel handle */ + ); + +/****************************************************************************/ +/** +* @brief Returns the cause of channel specific DMA interrupt +* +* This function returns the cause of interrupt +* +* @return Interrupt status, each bit representing a specific type of interrupt +* of type dmacHw_INTERRUPT_STATUS_e +* @note +* This function should be called under the context of ISR +*/ +/****************************************************************************/ +dmacHw_INTERRUPT_STATUS_e dmacHw_getInterruptStatus(dmacHw_HANDLE_t handle /* [ IN ] DMA Channel handle */ + ); + +/****************************************************************************/ +/** +* @brief Indentifies a DMA channel causing interrupt +* +* This functions returns a channel causing interrupt of type dmacHw_INTERRUPT_STATUS_e +* +* @return NULL : No channel causing DMA interrupt +* ! NULL : Handle to a channel causing DMA interrupt +* @note +* dmacHw_clearInterrupt() must be called with a valid handle after calling this function +*/ +/****************************************************************************/ +dmacHw_HANDLE_t dmacHw_getInterruptSource(void); + +/****************************************************************************/ +/** +* @brief Sets channel specific user data +* +* This function associates user data to a specif DMA channel +* +*/ +/****************************************************************************/ +void dmacHw_setChannelUserData(dmacHw_HANDLE_t handle, /* [ IN ] DMA Channel handle */ + void *userData /* [ IN ] User data */ + ); + +/****************************************************************************/ +/** +* @brief Gets channel specific user data +* +* This function returns user data specific to a DMA channel +* +* @return user data +*/ +/****************************************************************************/ +void *dmacHw_getChannelUserData(dmacHw_HANDLE_t handle /* [ IN ] DMA Channel handle */ + ); + +/****************************************************************************/ +/** +* @brief Displays channel specific registers and other control parameters +* +* +* @return void +* +* @note +* None +*/ +/****************************************************************************/ +void dmacHw_printDebugInfo(dmacHw_HANDLE_t handle, /* [ IN ] DMA Channel handle */ + void *pDescriptor, /* [ IN ] Descriptor buffer */ + int (*fpPrint) (const char *, ...) /* [ IN ] Print callback function */ + ); + +/****************************************************************************/ +/** +* @brief Provides DMA controller attributes +* +* +* @return DMA controller attributes +* +* @note +* None +*/ +/****************************************************************************/ +uint32_t dmacHw_getDmaControllerAttribute(dmacHw_HANDLE_t handle, /* [ IN ] DMA Channel handle */ + dmacHw_CONTROLLER_ATTRIB_e attr /* [ IN ] DMA Controler attribute of type dmacHw_CONTROLLER_ATTRIB_e */ + ); + +#endif /* _DMACHW_H */ |
