summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-at91/at91sam9260_devices.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-at91/at91sam9260_devices.c')
-rw-r--r--arch/arm/mach-at91/at91sam9260_devices.c38
1 files changed, 31 insertions, 7 deletions
diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
index 642ccb6d26b2..df487ce83c5e 100644
--- a/arch/arm/mach-at91/at91sam9260_devices.c
+++ b/arch/arm/mach-at91/at91sam9260_devices.c
@@ -21,6 +21,7 @@
#include <mach/cpu.h>
#include <mach/at91sam9260.h>
#include <mach/at91sam9260_matrix.h>
+#include <mach/at91_matrix.h>
#include <mach/at91sam9_smc.h>
#include "generic.h"
@@ -422,8 +423,8 @@ void __init at91_add_device_nand(struct atmel_nand_data *data)
if (!data)
return;
- csa = at91_sys_read(AT91_MATRIX_EBICSA);
- at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);
+ csa = at91_matrix_read(AT91_MATRIX_EBICSA);
+ at91_matrix_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);
/* enable pin */
if (gpio_is_valid(data->enable_pin))
@@ -717,18 +718,42 @@ static struct resource rtt_resources[] = {
.start = AT91SAM9260_BASE_RTT,
.end = AT91SAM9260_BASE_RTT + SZ_16 - 1,
.flags = IORESOURCE_MEM,
- }
+ }, {
+ .flags = IORESOURCE_MEM,
+ },
};
static struct platform_device at91sam9260_rtt_device = {
.name = "at91_rtt",
.id = 0,
.resource = rtt_resources,
- .num_resources = ARRAY_SIZE(rtt_resources),
};
+
+#if IS_ENABLED(CONFIG_RTC_DRV_AT91SAM9)
+static void __init at91_add_device_rtt_rtc(void)
+{
+ at91sam9260_rtt_device.name = "rtc-at91sam9";
+ /*
+ * The second resource is needed:
+ * GPBR will serve as the storage for RTC time offset
+ */
+ at91sam9260_rtt_device.num_resources = 2;
+ rtt_resources[1].start = AT91SAM9260_BASE_GPBR +
+ 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR;
+ rtt_resources[1].end = rtt_resources[1].start + 3;
+}
+#else
+static void __init at91_add_device_rtt_rtc(void)
+{
+ /* Only one resource is needed: RTT not used as RTC */
+ at91sam9260_rtt_device.num_resources = 1;
+}
+#endif
+
static void __init at91_add_device_rtt(void)
{
+ at91_add_device_rtt_rtc();
platform_device_register(&at91sam9260_rtt_device);
}
@@ -1139,7 +1164,6 @@ static inline void configure_usart5_pins(void)
}
static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
-struct platform_device *atmel_default_console_device; /* the serial console device */
void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
{
@@ -1265,7 +1289,7 @@ void __init at91_add_device_cf(struct at91_cf_data *data)
if (!data)
return;
- csa = at91_sys_read(AT91_MATRIX_EBICSA);
+ csa = at91_matrix_read(AT91_MATRIX_EBICSA);
switch (data->chipselect) {
case 4:
@@ -1288,7 +1312,7 @@ void __init at91_add_device_cf(struct at91_cf_data *data)
return;
}
- at91_sys_write(AT91_MATRIX_EBICSA, csa);
+ at91_matrix_write(AT91_MATRIX_EBICSA, csa);
if (gpio_is_valid(data->rst_pin)) {
at91_set_multi_drive(data->rst_pin, 0);
OpenPOWER on IntegriCloud