summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-at91/at91rm9200_devices.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-at91/at91rm9200_devices.c')
-rw-r--r--arch/arm/mach-at91/at91rm9200_devices.c14
1 files changed, 7 insertions, 7 deletions
diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c
index 18bacec2b094..640520c04c46 100644
--- a/arch/arm/mach-at91/at91rm9200_devices.c
+++ b/arch/arm/mach-at91/at91rm9200_devices.c
@@ -21,6 +21,7 @@
#include <mach/board.h>
#include <mach/at91rm9200.h>
#include <mach/at91rm9200_mc.h>
+#include <mach/at91_ramc.h>
#include "generic.h"
@@ -241,15 +242,15 @@ void __init at91_add_device_cf(struct at91_cf_data *data)
data->chipselect = 4; /* can only use EBI ChipSelect 4 */
/* CF takes over CS4, CS5, CS6 */
- csa = at91_sys_read(AT91_EBI_CSA);
- at91_sys_write(AT91_EBI_CSA, csa | AT91_EBI_CS4A_SMC_COMPACTFLASH);
+ csa = at91_ramc_read(0, AT91_EBI_CSA);
+ at91_ramc_write(0, AT91_EBI_CSA, csa | AT91_EBI_CS4A_SMC_COMPACTFLASH);
/*
* Static memory controller timing adjustments.
* REVISIT: these timings are in terms of MCK cycles, so
* when MCK changes (cpufreq etc) so must these values...
*/
- at91_sys_write(AT91_SMC_CSR(4),
+ at91_ramc_write(0, AT91_SMC_CSR(4),
AT91_SMC_ACSS_STD
| AT91_SMC_DBW_16
| AT91_SMC_BAT
@@ -407,11 +408,11 @@ void __init at91_add_device_nand(struct atmel_nand_data *data)
return;
/* enable the address range of CS3 */
- csa = at91_sys_read(AT91_EBI_CSA);
- at91_sys_write(AT91_EBI_CSA, csa | AT91_EBI_CS3A_SMC_SMARTMEDIA);
+ csa = at91_ramc_read(0, AT91_EBI_CSA);
+ at91_ramc_write(0, AT91_EBI_CSA, csa | AT91_EBI_CS3A_SMC_SMARTMEDIA);
/* set the bus interface characteristics */
- at91_sys_write(AT91_SMC_CSR(3), AT91_SMC_ACSS_STD | AT91_SMC_DBW_8 | AT91_SMC_WSEN
+ at91_ramc_write(0, AT91_SMC_CSR(3), AT91_SMC_ACSS_STD | AT91_SMC_DBW_8 | AT91_SMC_WSEN
| AT91_SMC_NWS_(5)
| AT91_SMC_TDF_(1)
| AT91_SMC_RWSETUP_(0) /* tDS Data Set up Time 30 - ns */
@@ -1114,7 +1115,6 @@ static inline void configure_usart3_pins(unsigned pins)
}
static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
-struct platform_device *atmel_default_console_device; /* the serial console device */
void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
{
OpenPOWER on IntegriCloud