diff options
Diffstat (limited to 'arch/arm/boot/dts')
34 files changed, 160 insertions, 160 deletions
diff --git a/arch/arm/boot/dts/rk3036-evb.dts b/arch/arm/boot/dts/rk3036-evb.dts index 2f5f15524fba..c0953410121b 100644 --- a/arch/arm/boot/dts/rk3036-evb.dts +++ b/arch/arm/boot/dts/rk3036-evb.dts @@ -56,7 +56,7 @@ pinctrl-names = "default"; pinctrl-0 = <&emac_xfer>, <&emac_mdio>; phy = <&phy0>; - phy-reset-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>; /* PHY_RST */ + phy-reset-gpios = <&gpio2 RK_PC6 GPIO_ACTIVE_LOW>; /* PHY_RST */ phy-reset-duration = <10>; /* millisecond */ status = "okay"; diff --git a/arch/arm/boot/dts/rk3036-kylin.dts b/arch/arm/boot/dts/rk3036-kylin.dts index 3de958ec29c0..5726135b7f8a 100644 --- a/arch/arm/boot/dts/rk3036-kylin.dts +++ b/arch/arm/boot/dts/rk3036-kylin.dts @@ -55,7 +55,7 @@ compatible = "gpio-leds"; work { - gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>; + gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>; label = "kylin:red:led"; pinctrl-names = "default"; pinctrl-0 = <&led_ctl>; @@ -74,9 +74,9 @@ * - SDIO_RESET_L_WL_RST * - SDIO_RESET_L_BT_EN */ - reset-gpios = <&gpio0 26 GPIO_ACTIVE_LOW>, /* WL_REG_ON */ - <&gpio0 27 GPIO_ACTIVE_LOW>, /* WL_RST */ - <&gpio2 9 GPIO_ACTIVE_LOW>; /* BT_EN */ + reset-gpios = <&gpio0 RK_PD2 GPIO_ACTIVE_LOW>, /* WL_REG_ON */ + <&gpio0 RK_PD3 GPIO_ACTIVE_LOW>, /* WL_RST */ + <&gpio2 RK_PB1 GPIO_ACTIVE_LOW>; /* BT_EN */ }; sound { @@ -121,7 +121,7 @@ pinctrl-names = "default"; pinctrl-0 = <&emac_xfer>, <&emac_mdio>; phy = <&phy0>; - phy-reset-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>; /* PHY_RST */ + phy-reset-gpios = <&gpio2 RK_PC6 GPIO_ACTIVE_LOW>; /* PHY_RST */ phy-reset-duration = <10>; /* millisecond */ status = "okay"; @@ -148,7 +148,7 @@ compatible = "rockchip,rk808"; reg = <0x1b>; interrupt-parent = <&gpio2>; - interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pmic_int &global_pwroff>; rockchip,system-power-controller; diff --git a/arch/arm/boot/dts/rk3066a-bqcurie2.dts b/arch/arm/boot/dts/rk3066a-bqcurie2.dts index c0d8b5446ba7..e1f5198723b2 100644 --- a/arch/arm/boot/dts/rk3066a-bqcurie2.dts +++ b/arch/arm/boot/dts/rk3066a-bqcurie2.dts @@ -71,7 +71,7 @@ regulator-name = "sdmmc-supply"; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; - gpio = <&gpio3 7 GPIO_ACTIVE_LOW>; + gpio = <&gpio3 RK_PA7 GPIO_ACTIVE_LOW>; startup-delay-us = <100000>; vin-supply = <&vcc_io>; }; @@ -81,7 +81,7 @@ autorepeat; power { - gpios = <&gpio6 2 GPIO_ACTIVE_LOW>; /* GPIO6_A2 */ + gpios = <&gpio6 RK_PA2 GPIO_ACTIVE_LOW>; /* GPIO6_A2 */ linux,code = <KEY_POWER>; label = "GPIO Key Power"; linux,input-type = <1>; @@ -89,7 +89,7 @@ debounce-interval = <100>; }; volume-down { - gpios = <&gpio4 21 GPIO_ACTIVE_LOW>; /* GPIO4_C5 */ + gpios = <&gpio4 RK_PC5 GPIO_ACTIVE_LOW>; /* GPIO4_C5 */ linux,code = <KEY_VOLUMEDOWN>; label = "GPIO Key Vol-"; linux,input-type = <1>; @@ -111,7 +111,7 @@ reg = <0x2d>; interrupt-parent = <&gpio6>; - interrupts = <6 IRQ_TYPE_LEVEL_LOW>; + interrupts = <RK_PA6 IRQ_TYPE_LEVEL_LOW>; vcc5-supply = <&vcc_io>; vcc6-supply = <&vcc_io>; diff --git a/arch/arm/boot/dts/rk3066a-marsboard.dts b/arch/arm/boot/dts/rk3066a-marsboard.dts index 0a54c4beff8d..c6d92c25df42 100644 --- a/arch/arm/boot/dts/rk3066a-marsboard.dts +++ b/arch/arm/boot/dts/rk3066a-marsboard.dts @@ -69,7 +69,7 @@ regulator-name = "sdmmc-supply"; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; - gpio = <&gpio3 7 GPIO_ACTIVE_LOW>; + gpio = <&gpio3 RK_PA7 GPIO_ACTIVE_LOW>; startup-delay-us = <100000>; vin-supply = <&vcc_io>; }; @@ -91,7 +91,7 @@ reg = <0x2d>; interrupt-parent = <&gpio6>; - interrupts = <4 IRQ_TYPE_LEVEL_LOW>; + interrupts = <RK_PA4 IRQ_TYPE_LEVEL_LOW>; vcc1-supply = <&vsys>; vcc2-supply = <&vsys>; @@ -186,7 +186,7 @@ phy0: ethernet-phy@0 { reg = <0>; interrupt-parent = <&gpio1>; - interrupts = <26 IRQ_TYPE_LEVEL_LOW>; + interrupts = <RK_PD2 IRQ_TYPE_LEVEL_LOW>; }; }; diff --git a/arch/arm/boot/dts/rk3066a-mk808.dts b/arch/arm/boot/dts/rk3066a-mk808.dts index 658eb7ddeaf5..7ca1cf5241e0 100644 --- a/arch/arm/boot/dts/rk3066a-mk808.dts +++ b/arch/arm/boot/dts/rk3066a-mk808.dts @@ -61,7 +61,7 @@ blue { label = "mk808:blue:power"; - gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>; + gpios = <&gpio0 RK_PA3 GPIO_ACTIVE_HIGH>; default-state = "off"; linux,default-trigger = "default-on"; }; @@ -77,7 +77,7 @@ vcc_host: usb-host-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio0 6 GPIO_ACTIVE_HIGH>; + gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; pinctrl-0 = <&host_drv>; pinctrl-names = "default"; regulator-always-on; @@ -91,7 +91,7 @@ vcc_otg: usb-otg-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio0 5 GPIO_ACTIVE_HIGH>; + gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>; pinctrl-0 = <&otg_drv>; pinctrl-names = "default"; regulator-always-on; @@ -104,7 +104,7 @@ vcc_sd: sdmmc-regulator { compatible = "regulator-fixed"; - gpio = <&gpio3 7 GPIO_ACTIVE_LOW>; + gpio = <&gpio3 RK_PA7 GPIO_ACTIVE_LOW>; pinctrl-0 = <&sdmmc_pwr>; pinctrl-names = "default"; regulator-name = "vcc_sd"; @@ -117,7 +117,7 @@ vcc_wifi: sdio-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio3 24 GPIO_ACTIVE_HIGH>; + gpio = <&gpio3 RK_PD0 GPIO_ACTIVE_HIGH>; pinctrl-0 = <&wifi_pwr>; pinctrl-names = "default"; regulator-name = "vcc_wifi"; diff --git a/arch/arm/boot/dts/rk3066a-rayeager.dts b/arch/arm/boot/dts/rk3066a-rayeager.dts index 82465b644443..8907deaab18e 100644 --- a/arch/arm/boot/dts/rk3066a-rayeager.dts +++ b/arch/arm/boot/dts/rk3066a-rayeager.dts @@ -55,7 +55,7 @@ ir: ir-receiver { compatible = "gpio-ir-receiver"; - gpios = <&gpio6 1 GPIO_ACTIVE_LOW>; + gpios = <&gpio6 RK_PA1 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&ir_int>; }; @@ -65,7 +65,7 @@ power { wakeup-source; - gpios = <&gpio6 2 GPIO_ACTIVE_LOW>; + gpios = <&gpio6 RK_PA2 GPIO_ACTIVE_LOW>; label = "GPIO Power"; linux,code = <KEY_POWER>; pinctrl-names = "default"; @@ -115,7 +115,7 @@ vcc_sata: sata-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio4 22 GPIO_ACTIVE_HIGH>; + gpio = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&sata_pwr>; regulator-name = "usb_5v"; @@ -127,7 +127,7 @@ vcc_sd: sdmmc-regulator { compatible = "regulator-fixed"; - gpio = <&gpio3 7 GPIO_ACTIVE_LOW>; + gpio = <&gpio3 RK_PA7 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&sdmmc_pwr>; regulator-name = "vcc_sd"; @@ -140,7 +140,7 @@ vcc_host: usb-host-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio0 6 GPIO_ACTIVE_HIGH>; + gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&host_drv>; regulator-name = "host-pwr"; @@ -153,7 +153,7 @@ vcc_otg: usb-otg-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio0 5 GPIO_ACTIVE_HIGH>; + gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&otg_drv>; regulator-name = "vcc_otg"; @@ -201,7 +201,7 @@ compatible = "asahi-kasei,ak8975"; reg = <0x0d>; interrupt-parent = <&gpio4>; - interrupts = <17 IRQ_TYPE_EDGE_RISING>; + interrupts = <RK_PC1 IRQ_TYPE_EDGE_RISING>; pinctrl-names = "default"; pinctrl-0 = <&comp_int>; }; @@ -210,7 +210,7 @@ compatible = "fsl,mma8452"; reg = <0x1d>; interrupt-parent = <&gpio4>; - interrupts = <16 IRQ_TYPE_EDGE_RISING>; + interrupts = <RK_PC0 IRQ_TYPE_EDGE_RISING>; pinctrl-names = "default"; pinctrl-0 = <&gsensor_int>; }; @@ -223,7 +223,7 @@ tps: tps@2d { reg = <0x2d>; interrupt-parent = <&gpio6>; - interrupts = <4 IRQ_TYPE_EDGE_RISING>; + interrupts = <RK_PA4 IRQ_TYPE_EDGE_RISING>; pinctrl-names = "default"; pinctrl-0 = <&pmic_int>, <&pwr_hold>; diff --git a/arch/arm/boot/dts/rk3188-px3-evb.dts b/arch/arm/boot/dts/rk3188-px3-evb.dts index df727bafd6dc..5b2a0b6885cd 100644 --- a/arch/arm/boot/dts/rk3188-px3-evb.dts +++ b/arch/arm/boot/dts/rk3188-px3-evb.dts @@ -62,7 +62,7 @@ autorepeat; power { - gpios = <&gpio0 4 GPIO_ACTIVE_LOW>; + gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; label = "GPIO Key Power"; linux,input-type = <1>; @@ -102,7 +102,7 @@ compatible = "bosch,bma250"; reg = <0x18>; interrupt-parent = <&gpio0>; - interrupts = <15 IRQ_TYPE_LEVEL_LOW>; + interrupts = <RK_PB7 IRQ_TYPE_LEVEL_LOW>; }; }; @@ -114,7 +114,7 @@ compatible = "rockchip,rk818"; reg = <0x1c>; interrupt-parent = <&gpio0>; - interrupts = <11 IRQ_TYPE_LEVEL_LOW>; + interrupts = <RK_PB3 IRQ_TYPE_LEVEL_LOW>; rockchip,system-power-controller; wakeup-source; #clock-cells = <1>; @@ -247,8 +247,8 @@ compatible = "silead,gsl1680"; reg = <0x40>; interrupt-parent = <&gpio1>; - interrupts = <15 IRQ_TYPE_EDGE_FALLING>; - power-gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; + interrupts = <RK_PB7 IRQ_TYPE_EDGE_FALLING>; + power-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>; touchscreen-size-x = <800>; touchscreen-size-y = <1280>; silead,max-fingers = <5>; diff --git a/arch/arm/boot/dts/rk3188-radxarock.dts b/arch/arm/boot/dts/rk3188-radxarock.dts index 5e8a235ed02d..ca0a1c4bc15c 100644 --- a/arch/arm/boot/dts/rk3188-radxarock.dts +++ b/arch/arm/boot/dts/rk3188-radxarock.dts @@ -58,7 +58,7 @@ autorepeat; power { - gpios = <&gpio0 4 GPIO_ACTIVE_LOW>; + gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; label = "GPIO Key Power"; linux,input-type = <1>; @@ -72,19 +72,19 @@ green { label = "rock:green:user1"; - gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; + gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_LOW>; default-state = "off"; }; blue { label = "rock:blue:user2"; - gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; + gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_LOW>; default-state = "off"; }; sleep { label = "rock:red:power"; - gpios = <&gpio0 15 0>; + gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>; default-state = "off"; }; }; @@ -106,7 +106,7 @@ ir_recv: gpio-ir-receiver { compatible = "gpio-ir-receiver"; - gpios = <&gpio0 10 1>; + gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&ir_recv_pin>; }; @@ -114,7 +114,7 @@ vcc_otg: usb-otg-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>; + gpio = <&gpio2 RK_PD7 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&otg_vbus_drv>; regulator-name = "otg-vbus"; @@ -129,7 +129,7 @@ regulator-name = "sdmmc-supply"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - gpio = <&gpio3 1 GPIO_ACTIVE_LOW>; + gpio = <&gpio3 RK_PA1 GPIO_ACTIVE_LOW>; startup-delay-us = <100000>; vin-supply = <&vcc_io>; }; @@ -137,7 +137,7 @@ vcc_host: usb-host-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio0 3 GPIO_ACTIVE_HIGH>; + gpio = <&gpio0 RK_PA3 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&host_vbus_drv>; regulator-name = "host-pwr"; @@ -168,7 +168,7 @@ phy0: ethernet-phy@0 { reg = <0>; interrupt-parent = <&gpio3>; - interrupts = <26 IRQ_TYPE_LEVEL_LOW>; + interrupts = <RK_PD2 IRQ_TYPE_LEVEL_LOW>; }; }; @@ -184,7 +184,7 @@ compatible = "haoyu,hym8563"; reg = <0x51>; interrupt-parent = <&gpio0>; - interrupts = <13 IRQ_TYPE_EDGE_FALLING>; + interrupts = <RK_PB5 IRQ_TYPE_EDGE_FALLING>; pinctrl-names = "default"; pinctrl-0 = <&rtc_int>; #clock-cells = <0>; diff --git a/arch/arm/boot/dts/rk3229-evb.dts b/arch/arm/boot/dts/rk3229-evb.dts index dcdd0cee619e..275092a950ef 100644 --- a/arch/arm/boot/dts/rk3229-evb.dts +++ b/arch/arm/boot/dts/rk3229-evb.dts @@ -77,7 +77,7 @@ phy-mode = "rgmii"; pinctrl-names = "default"; pinctrl-0 = <&rgmii_pins>; - snps,reset-gpio = <&gpio2 24 GPIO_ACTIVE_LOW>; + snps,reset-gpio = <&gpio2 RK_PD0 GPIO_ACTIVE_LOW>; snps,reset-active-low; snps,reset-delays-us = <0 10000 1000000>; tx_delay = <0x30>; diff --git a/arch/arm/boot/dts/rk3288-evb-act8846.dts b/arch/arm/boot/dts/rk3288-evb-act8846.dts index 041dd5d2d18c..b9418d170502 100644 --- a/arch/arm/boot/dts/rk3288-evb-act8846.dts +++ b/arch/arm/boot/dts/rk3288-evb-act8846.dts @@ -47,7 +47,7 @@ vcc_lcd: vcc-lcd { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio7 3 GPIO_ACTIVE_HIGH>; + gpio = <&gpio7 RK_PA3 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&lcd_en>; regulator-name = "vcc_lcd"; @@ -57,7 +57,7 @@ vcc_wl: vcc-wl { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio7 9 GPIO_ACTIVE_HIGH>; + gpio = <&gpio7 RK_PB1 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&wifi_pwr>; regulator-name = "vcc_wl"; @@ -96,7 +96,7 @@ reg = <0x51>; interrupt-parent = <&gpio0>; - interrupts = <4 IRQ_TYPE_EDGE_FALLING>; + interrupts = <RK_PA4 IRQ_TYPE_EDGE_FALLING>; pinctrl-names = "default"; pinctrl-0 = <&pmic_int>; diff --git a/arch/arm/boot/dts/rk3288-evb-rk808.dts b/arch/arm/boot/dts/rk3288-evb-rk808.dts index 44ebc6e59b3a..56c266df01c1 100644 --- a/arch/arm/boot/dts/rk3288-evb-rk808.dts +++ b/arch/arm/boot/dts/rk3288-evb-rk808.dts @@ -52,7 +52,7 @@ compatible = "rockchip,rk808"; reg = <0x1b>; interrupt-parent = <&gpio0>; - interrupts = <4 IRQ_TYPE_LEVEL_LOW>; + interrupts = <RK_PA4 IRQ_TYPE_LEVEL_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pmic_int &global_pwroff>; rockchip,system-power-controller; diff --git a/arch/arm/boot/dts/rk3288-evb.dtsi b/arch/arm/boot/dts/rk3288-evb.dtsi index bf7ccfad3260..0dec94c3583b 100644 --- a/arch/arm/boot/dts/rk3288-evb.dtsi +++ b/arch/arm/boot/dts/rk3288-evb.dtsi @@ -84,7 +84,7 @@ 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255>; default-brightness-level = <128>; - enable-gpios = <&gpio7 2 GPIO_ACTIVE_HIGH>; + enable-gpios = <&gpio7 RK_PA2 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&bl_en>; pwms = <&pwm0 0 1000000 PWM_POLARITY_INVERTED>; @@ -100,7 +100,7 @@ panel: panel { compatible ="lg,lp079qx1-sp0v", "simple-panel"; backlight = <&backlight>; - enable-gpios = <&gpio7 4 GPIO_ACTIVE_HIGH>; + enable-gpios = <&gpio7 RK_PA4 GPIO_ACTIVE_HIGH>; pinctrl-0 = <&lcd_cs>; ports { @@ -120,7 +120,7 @@ pinctrl-0 = <&pwrbtn>; power { - gpios = <&gpio0 5 GPIO_ACTIVE_LOW>; + gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; label = "GPIO Key Power"; linux,input-type = <1>; @@ -133,7 +133,7 @@ vcc_host: vcc-host-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio0 14 GPIO_ACTIVE_HIGH>; + gpio = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&host_vbus_drv>; regulator-name = "vcc_host"; @@ -144,7 +144,7 @@ vcc_phy: vcc-phy-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio0 6 GPIO_ACTIVE_HIGH>; + gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <ð_phy_pwr>; regulator-name = "vcc_phy"; @@ -170,7 +170,7 @@ */ vcc_sd: sdmmc-regulator { compatible = "regulator-fixed"; - gpio = <&gpio7 11 GPIO_ACTIVE_LOW>; + gpio = <&gpio7 RK_PB3 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&sdmmc_pwr>; regulator-name = "vcc_sd"; @@ -236,7 +236,7 @@ phy-supply = <&vcc_phy>; phy-mode = "rgmii"; clock_in_out = "input"; - snps,reset-gpio = <&gpio4 7 0>; + snps,reset-gpio = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>; snps,reset-active-low; snps,reset-delays-us = <0 10000 1000000>; assigned-clocks = <&cru SCLK_MAC>; diff --git a/arch/arm/boot/dts/rk3288-fennec.dts b/arch/arm/boot/dts/rk3288-fennec.dts index 805c0d26770b..61d1c1028317 100644 --- a/arch/arm/boot/dts/rk3288-fennec.dts +++ b/arch/arm/boot/dts/rk3288-fennec.dts @@ -93,7 +93,7 @@ phy-mode = "rgmii"; snps,reset-active-low; snps,reset-delays-us = <0 10000 1000000>; - snps,reset-gpio = <&gpio4 8 GPIO_ACTIVE_LOW>; + snps,reset-gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_LOW>; tx_delay = <0x30>; rx_delay = <0x10>; status = "okay"; @@ -111,7 +111,7 @@ compatible = "rockchip,rk808"; reg = <0x1b>; interrupt-parent = <&gpio0>; - interrupts = <4 IRQ_TYPE_LEVEL_LOW>; + interrupts = <RK_PA4 IRQ_TYPE_LEVEL_LOW>; #clock-cells = <1>; clock-output-names = "xin32k", "rk808-clkout2"; pinctrl-names = "default"; @@ -345,7 +345,7 @@ &usbphy { pinctrl-names = "default"; pinctrl-0 = <&host_drv>; - vbus_drv-gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; + vbus_drv-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>; status = "okay"; }; diff --git a/arch/arm/boot/dts/rk3288-firefly-beta.dts b/arch/arm/boot/dts/rk3288-firefly-beta.dts index 75d77e38e0d6..0195d9721660 100644 --- a/arch/arm/boot/dts/rk3288-firefly-beta.dts +++ b/arch/arm/boot/dts/rk3288-firefly-beta.dts @@ -49,7 +49,7 @@ }; &ir { - gpios = <&gpio7 5 GPIO_ACTIVE_LOW>; + gpios = <&gpio7 RK_PA5 GPIO_ACTIVE_LOW>; }; &pinctrl { diff --git a/arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi b/arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi index d242588bae0d..813496618d08 100644 --- a/arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi +++ b/arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi @@ -96,7 +96,7 @@ phy-mode = "rgmii"; snps,reset-active-low; snps,reset-delays-us = <0 10000 1000000>; - snps,reset-gpio = <&gpio4 8 GPIO_ACTIVE_LOW>; + snps,reset-gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_LOW>; tx_delay = <0x30>; rx_delay = <0x10>; status = "ok"; diff --git a/arch/arm/boot/dts/rk3288-firefly-reload.dts b/arch/arm/boot/dts/rk3288-firefly-reload.dts index 751bee81128e..d0b3204a4799 100644 --- a/arch/arm/boot/dts/rk3288-firefly-reload.dts +++ b/arch/arm/boot/dts/rk3288-firefly-reload.dts @@ -53,7 +53,7 @@ power { wakeup-source; - gpios = <&gpio0 5 GPIO_ACTIVE_LOW>; + gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; label = "GPIO Power"; linux,code = <KEY_POWER>; pinctrl-names = "default"; @@ -63,14 +63,14 @@ ir-receiver { compatible = "gpio-ir-receiver"; - gpios = <&gpio7 0 GPIO_ACTIVE_LOW>; + gpios = <&gpio7 RK_PA0 GPIO_ACTIVE_LOW>; }; leds { compatible = "gpio-leds"; power { - gpios = <&gpio8 2 GPIO_ACTIVE_LOW>; + gpios = <&gpio8 RK_PA2 GPIO_ACTIVE_LOW>; label = "firefly:blue:power"; pinctrl-names = "default"; pinctrl-0 = <&power_led>; @@ -78,7 +78,7 @@ }; work { - gpios = <&gpio8 1 GPIO_ACTIVE_LOW>; + gpios = <&gpio8 RK_PA1 GPIO_ACTIVE_LOW>; label = "firefly:blue:user"; linux,default-trigger = "rc-feedback"; pinctrl-names = "default"; @@ -92,7 +92,7 @@ clock-names = "ext_clock"; pinctrl-names = "default"; pinctrl-0 = <&wifi_enable>; - reset-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>; + reset-gpios = <&gpio4 RK_PD4 GPIO_ACTIVE_LOW>; }; sound { @@ -112,7 +112,7 @@ vcc_host_5v: usb-host-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio0 14 GPIO_ACTIVE_HIGH>; + gpio = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&host_vbus_drv>; regulator-name = "vcc_host_5v"; @@ -133,7 +133,7 @@ vcc_sd: sdmmc-regulator { compatible = "regulator-fixed"; - gpio = <&gpio7 11 GPIO_ACTIVE_LOW>; + gpio = <&gpio7 RK_PB3 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&sdmmc_pwr>; regulator-name = "vcc_sd"; @@ -146,7 +146,7 @@ vcc_otg_5v: usb-otg-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>; + gpio = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&otg_vbus_drv>; regulator-name = "vcc_otg_5v"; @@ -159,7 +159,7 @@ dovdd_1v8: dovdd-1v8-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio0 11 GPIO_ACTIVE_HIGH>; + gpio = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&dvp_pwr>; regulator-name = "dovdd_1v8"; @@ -171,7 +171,7 @@ vcc28_dvp: vcc28-dvp-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio0 11 GPIO_ACTIVE_HIGH>; + gpio = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&dvp_pwr>; regulator-name = "vcc28_dvp"; @@ -183,7 +183,7 @@ af_28: af_28-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio0 11 GPIO_ACTIVE_HIGH>; + gpio = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&dvp_pwr>; regulator-name = "af_28"; @@ -195,7 +195,7 @@ dvdd_1v2: af_28-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>; + gpio = <&gpio7 RK_PB4 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&cif_pwr>; regulator-name = "dvdd_1v2"; @@ -221,7 +221,7 @@ clock-frequency = <32768>; clock-output-names = "xin32k"; interrupt-parent = <&gpio7>; - interrupts = <4 IRQ_TYPE_EDGE_FALLING>; + interrupts = <RK_PA4 IRQ_TYPE_EDGE_FALLING>; pinctrl-names = "default"; pinctrl-0 = <&rtc_int>; }; diff --git a/arch/arm/boot/dts/rk3288-firefly.dts b/arch/arm/boot/dts/rk3288-firefly.dts index c07fe92dc69f..14271be72f30 100644 --- a/arch/arm/boot/dts/rk3288-firefly.dts +++ b/arch/arm/boot/dts/rk3288-firefly.dts @@ -49,7 +49,7 @@ }; &ir { - gpios = <&gpio7 0 GPIO_ACTIVE_LOW>; + gpios = <&gpio7 RK_PA0 GPIO_ACTIVE_LOW>; }; &pinctrl { diff --git a/arch/arm/boot/dts/rk3288-firefly.dtsi b/arch/arm/boot/dts/rk3288-firefly.dtsi index 44935af1fb0e..10793ac18599 100644 --- a/arch/arm/boot/dts/rk3288-firefly.dtsi +++ b/arch/arm/boot/dts/rk3288-firefly.dtsi @@ -75,7 +75,7 @@ power { wakeup-source; - gpios = <&gpio0 5 GPIO_ACTIVE_LOW>; + gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; label = "GPIO Power"; linux,code = <KEY_POWER>; pinctrl-names = "default"; @@ -87,7 +87,7 @@ compatible = "gpio-leds"; work { - gpios = <&gpio8 1 GPIO_ACTIVE_LOW>; + gpios = <&gpio8 RK_PA1 GPIO_ACTIVE_LOW>; label = "firefly:blue:user"; linux,default-trigger = "rc-feedback"; pinctrl-names = "default"; @@ -95,7 +95,7 @@ }; power { - gpios = <&gpio8 2 GPIO_ACTIVE_LOW>; + gpios = <&gpio8 RK_PA2 GPIO_ACTIVE_LOW>; label = "firefly:green:power"; linux,default-trigger = "default-on"; pinctrl-names = "default"; @@ -114,7 +114,7 @@ vcc_sd: sdmmc-regulator { compatible = "regulator-fixed"; - gpio = <&gpio7 11 GPIO_ACTIVE_LOW>; + gpio = <&gpio7 RK_PB3 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&sdmmc_pwr>; regulator-name = "vcc_sd"; @@ -145,7 +145,7 @@ vcc_host_5v: usb-host-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio0 14 GPIO_ACTIVE_HIGH>; + gpio = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&host_vbus_drv>; regulator-name = "vcc_host_5v"; @@ -158,7 +158,7 @@ vcc_otg_5v: usb-otg-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>; + gpio = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&otg_vbus_drv>; regulator-name = "vcc_otg_5v"; @@ -175,7 +175,7 @@ vcc28_dvp: vcc28-dvp-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio0 11 GPIO_ACTIVE_HIGH>; + gpio = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&dvp_pwr>; regulator-name = "vcc28_dvp"; @@ -213,7 +213,7 @@ phy-mode = "rgmii"; snps,reset-active-low; snps,reset-delays-us = <0 10000 1000000>; - snps,reset-gpio = <&gpio4 8 GPIO_ACTIVE_LOW>; + snps,reset-gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_LOW>; tx_delay = <0x30>; rx_delay = <0x10>; status = "ok"; @@ -260,7 +260,7 @@ clock-frequency = <32768>; clock-output-names = "xin32k"; interrupt-parent = <&gpio7>; - interrupts = <4 IRQ_TYPE_EDGE_FALLING>; + interrupts = <RK_PA4 IRQ_TYPE_EDGE_FALLING>; pinctrl-names = "default"; pinctrl-0 = <&rtc_int>; }; diff --git a/arch/arm/boot/dts/rk3288-miqi.dts b/arch/arm/boot/dts/rk3288-miqi.dts index 441d450fd151..21326f3e8564 100644 --- a/arch/arm/boot/dts/rk3288-miqi.dts +++ b/arch/arm/boot/dts/rk3288-miqi.dts @@ -68,7 +68,7 @@ compatible = "gpio-leds"; work { - gpios = <&gpio7 4 GPIO_ACTIVE_LOW>; + gpios = <&gpio7 RK_PA4 GPIO_ACTIVE_LOW>; label = "miqi:green:user"; linux,default-trigger = "default-on"; pinctrl-names = "default"; @@ -87,7 +87,7 @@ vcc_host: usb-host-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio0 14 GPIO_ACTIVE_HIGH>; + gpio = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&host_vbus_drv>; regulator-name = "vcc_host"; @@ -99,7 +99,7 @@ vcc_sd: sdmmc-regulator { compatible = "regulator-fixed"; - gpio = <&gpio7 11 GPIO_ACTIVE_LOW>; + gpio = <&gpio7 RK_PB3 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&sdmmc_pwr>; regulator-name = "vcc_sd"; @@ -146,7 +146,7 @@ phy-mode = "rgmii"; snps,reset-active-low; snps,reset-delays-us = <0 10000 1000000>; - snps,reset-gpio = <&gpio4 8 GPIO_ACTIVE_LOW>; + snps,reset-gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_LOW>; tx_delay = <0x30>; rx_delay = <0x10>; status = "ok"; diff --git a/arch/arm/boot/dts/rk3288-popmetal.dts b/arch/arm/boot/dts/rk3288-popmetal.dts index bc6d10054f6a..aa1f9ecff231 100644 --- a/arch/arm/boot/dts/rk3288-popmetal.dts +++ b/arch/arm/boot/dts/rk3288-popmetal.dts @@ -180,7 +180,7 @@ phy-supply = <&vcc_lan>; phy-mode = "rgmii"; clock_in_out = "input"; - snps,reset-gpio = <&gpio4 RK_PB0 0>; + snps,reset-gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>; snps,reset-active-low; snps,reset-delays-us = <0 10000 1000000>; assigned-clocks = <&cru SCLK_MAC>; @@ -205,7 +205,7 @@ compatible = "rockchip,rk808"; reg = <0x1b>; interrupt-parent = <&gpio0>; - interrupts = <4 IRQ_TYPE_LEVEL_LOW>; + interrupts = <RK_PA4 IRQ_TYPE_LEVEL_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pmic_int &global_pwroff>; rockchip,system-power-controller; @@ -390,7 +390,7 @@ compatible = "asahi-kasei,ak8975"; reg = <0x0d>; interrupt-parent = <&gpio8>; - interrupts = <1 IRQ_TYPE_EDGE_RISING>; + interrupts = <RK_PA1 IRQ_TYPE_EDGE_RISING>; pinctrl-names = "default"; pinctrl-0 = <&comp_int>; vdd-supply = <&vcc_io>; @@ -409,7 +409,7 @@ compatible = "fsl,mma8452"; reg = <0x1d>; interrupt-parent = <&gpio8>; - interrupts = <0 IRQ_TYPE_EDGE_RISING>; + interrupts = <RK_PA0 IRQ_TYPE_EDGE_RISING>; pinctrl-names = "default"; pinctrl-0 = <&gsensor_int>; }; diff --git a/arch/arm/boot/dts/rk3288-r89.dts b/arch/arm/boot/dts/rk3288-r89.dts index 04faa72dbd95..1145b62edde7 100644 --- a/arch/arm/boot/dts/rk3288-r89.dts +++ b/arch/arm/boot/dts/rk3288-r89.dts @@ -68,7 +68,7 @@ pinctrl-0 = <&pwrbtn>; power { - gpios = <&gpio0 5 GPIO_ACTIVE_LOW>; + gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; label = "GPIO Key Power"; linux,input-type = <1>; @@ -79,7 +79,7 @@ ir: ir-receiver { compatible = "gpio-ir-receiver"; - gpios = <&gpio7 0 GPIO_ACTIVE_LOW>; + gpios = <&gpio7 RK_PA0 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&ir_int>; }; @@ -87,7 +87,7 @@ vcc_host: vcc-host-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio0 14 GPIO_ACTIVE_HIGH>; + gpio = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&host_vbus_drv>; regulator-name = "vcc_host"; @@ -98,7 +98,7 @@ vcc_otg: vcc-otg-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>; + gpio = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&otg_vbus_drv>; regulator-name = "vcc_otg"; @@ -111,7 +111,7 @@ regulator-name = "sdmmc-supply"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - gpio = <&gpio7 11 GPIO_ACTIVE_LOW>; + gpio = <&gpio7 RK_PB3 GPIO_ACTIVE_LOW>; startup-delay-us = <100000>; vin-supply = <&vcc_io>; }; @@ -134,7 +134,7 @@ phy-supply = <&vcc_lan>; phy-mode = "rgmii"; clock_in_out = "input"; - snps,reset-gpio = <&gpio4 7 0>; + snps,reset-gpio = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>; snps,reset-active-low; snps,reset-delays-us = <0 10000 1000000>; assigned-clocks = <&cru SCLK_MAC>; @@ -187,7 +187,7 @@ #clock-cells = <0>; clock-output-names = "xin32k"; interrupt-parent = <&gpio0>; - interrupts = <4 IRQ_TYPE_EDGE_FALLING>; + interrupts = <RK_PA4 IRQ_TYPE_EDGE_FALLING>; pinctrl-names = "default"; pinctrl-0 = <&pmic_int>; }; diff --git a/arch/arm/boot/dts/rk3288-rock2-som.dtsi b/arch/arm/boot/dts/rk3288-rock2-som.dtsi index b25ba806d5ee..1c0bbc9b928b 100644 --- a/arch/arm/boot/dts/rk3288-rock2-som.dtsi +++ b/arch/arm/boot/dts/rk3288-rock2-som.dtsi @@ -51,7 +51,7 @@ compatible = "mmc-pwrseq-emmc"; pinctrl-0 = <&emmc_reset>; pinctrl-names = "default"; - reset-gpios = <&gpio3 9 GPIO_ACTIVE_LOW>; + reset-gpios = <&gpio3 RK_PB1 GPIO_ACTIVE_LOW>; }; ext_gmac: external-gmac-clock { @@ -106,7 +106,7 @@ phy-supply = <&vccio_pmu>; pinctrl-names = "default"; pinctrl-0 = <&rgmii_pins &phy_rst>; - snps,reset-gpio = <&gpio4 8 GPIO_ACTIVE_LOW>; + snps,reset-gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_LOW>; snps,reset-active-low; snps,reset-delays-us = <0 10000 30000>; rx_delay = <0x10>; diff --git a/arch/arm/boot/dts/rk3288-rock2-square.dts b/arch/arm/boot/dts/rk3288-rock2-square.dts index dd3ad2e93a6d..96a2e745bb93 100644 --- a/arch/arm/boot/dts/rk3288-rock2-square.dts +++ b/arch/arm/boot/dts/rk3288-rock2-square.dts @@ -53,13 +53,13 @@ compatible = "gpio-leds"; heartbeat { - gpios = <&gpio7 15 GPIO_ACTIVE_LOW>; + gpios = <&gpio7 RK_PB7 GPIO_ACTIVE_LOW>; label = "rock2:green:state1"; linux,default-trigger = "heartbeat"; }; mmc { - gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; + gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_LOW>; label = "rock2:blue:state2"; linux,default-trigger = "mmc0"; }; @@ -67,7 +67,7 @@ ir: ir-receiver { compatible = "gpio-ir-receiver"; - gpios = <&gpio8 1 GPIO_ACTIVE_LOW>; + gpios = <&gpio8 RK_PA1 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&ir_int>; }; @@ -92,13 +92,13 @@ clock-names = "ext_clock"; pinctrl-names = "default"; pinctrl-0 = <&wifi_enable>; - reset-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>; + reset-gpios = <&gpio4 RK_PD4 GPIO_ACTIVE_LOW>; }; vcc_usb_host: vcc-host-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio0 14 GPIO_ACTIVE_HIGH>; + gpio = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&host_vbus_drv>; /* Always on as the rockchip usb phy doesn't have a vbus-supply @@ -110,7 +110,7 @@ vcc_sd: sdmmc-regulator { compatible = "regulator-fixed"; - gpio = <&gpio7 11 GPIO_ACTIVE_LOW>; + gpio = <&gpio7 RK_PB3 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&sdmmc_pwr>; regulator-name = "vcc_sd"; @@ -166,7 +166,7 @@ clock-frequency = <32768>; clock-output-names = "xin32k"; interrupt-parent = <&gpio0>; - interrupts = <4 IRQ_TYPE_EDGE_FALLING>; + interrupts = <RK_PA4 IRQ_TYPE_EDGE_FALLING>; pinctrl-names = "default"; pinctrl-0 = <&pmic_int>; diff --git a/arch/arm/boot/dts/rk3288-veyron-analog-audio.dtsi b/arch/arm/boot/dts/rk3288-veyron-analog-audio.dtsi index 6d105914a4f3..280aceae25d5 100644 --- a/arch/arm/boot/dts/rk3288-veyron-analog-audio.dtsi +++ b/arch/arm/boot/dts/rk3288-veyron-analog-audio.dtsi @@ -17,8 +17,8 @@ rockchip,model = "VEYRON-I2S"; rockchip,i2s-controller = <&i2s>; rockchip,audio-codec = <&max98090>; - rockchip,hp-det-gpios = <&gpio6 5 GPIO_ACTIVE_HIGH>; - rockchip,mic-det-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>; + rockchip,hp-det-gpios = <&gpio6 RK_PA5 GPIO_ACTIVE_HIGH>; + rockchip,mic-det-gpios = <&gpio6 RK_PB3 GPIO_ACTIVE_LOW>; rockchip,headset-codec = <&headsetcodec>; }; }; @@ -28,7 +28,7 @@ compatible = "maxim,max98090"; reg = <0x10>; interrupt-parent = <&gpio6>; - interrupts = <7 IRQ_TYPE_EDGE_FALLING>; + interrupts = <RK_PA7 IRQ_TYPE_EDGE_FALLING>; clock-names = "mclk"; clocks = <&cru SCLK_I2S0_OUT>; pinctrl-names = "default"; @@ -41,7 +41,7 @@ compatible = "ti,ts3a227e"; reg = <0x3b>; interrupt-parent = <&gpio0>; - interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>; pinctrl-names = "default"; pinctrl-0 = <&ts3a227e_int_l>; ti,micbias = <7>; /* MICBIAS = 2.8V */ diff --git a/arch/arm/boot/dts/rk3288-veyron-brain.dts b/arch/arm/boot/dts/rk3288-veyron-brain.dts index cf5311d2617c..ed4255294ad4 100644 --- a/arch/arm/boot/dts/rk3288-veyron-brain.dts +++ b/arch/arm/boot/dts/rk3288-veyron-brain.dts @@ -67,7 +67,7 @@ vcc5_host2: vcc5-host2-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>; + gpio = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&usb2_pwr_en>; regulator-name = "vcc5_host2"; @@ -103,8 +103,8 @@ &rk808 { pinctrl-names = "default"; pinctrl-0 = <&pmic_int_l &dvs_1 &dvs_2>; - dvs-gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>, - <&gpio7 15 GPIO_ACTIVE_HIGH>; + dvs-gpios = <&gpio7 RK_PB3 GPIO_ACTIVE_HIGH>, + <&gpio7 RK_PB7 GPIO_ACTIVE_HIGH>; /delete-property/ vcc6-supply; @@ -133,7 +133,7 @@ &vcc50_hdmi { enable-active-high; - gpio = <&gpio7 2 GPIO_ACTIVE_HIGH>; + gpio = <&gpio7 RK_PA2 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&vcc50_hdmi_en>; }; diff --git a/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi b/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi index ce1f87980bcb..d752a315f884 100644 --- a/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi +++ b/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi @@ -91,7 +91,7 @@ 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255>; default-brightness-level = <128>; - enable-gpios = <&gpio7 2 GPIO_ACTIVE_HIGH>; + enable-gpios = <&gpio7 RK_PA2 GPIO_ACTIVE_HIGH>; backlight-boot-off; pinctrl-names = "default"; pinctrl-0 = <&bl_en>; @@ -102,7 +102,7 @@ gpio-charger { compatible = "gpio-charger"; charger-type = "mains"; - gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>; + gpios = <&gpio0 RK_PB0 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&ac_present_ap>; }; @@ -142,7 +142,7 @@ vcc5_host1: vcc5-host1-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio0 11 GPIO_ACTIVE_HIGH>; + gpio = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&host1_pwr_en>; regulator-name = "vcc5_host1"; @@ -154,7 +154,7 @@ vcc5v_otg: vcc5v-otg-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>; + gpio = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&usbotg_pwren_h>; regulator-name = "vcc5_host2"; @@ -190,7 +190,7 @@ pinctrl-0 = <&pwr_key_l &ap_lid_int_l>; lid { label = "Lid"; - gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; + gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>; wakeup-source; linux,code = <0>; /* SW_LID */ linux,input-type = <5>; /* EV_SW */ @@ -228,7 +228,7 @@ reg = <0>; google,cros-ec-spi-pre-delay = <30>; interrupt-parent = <&gpio7>; - interrupts = <7 IRQ_TYPE_LEVEL_LOW>; + interrupts = <RK_PA7 IRQ_TYPE_LEVEL_LOW>; pinctrl-names = "default"; pinctrl-0 = <&ec_int>; spi-max-frequency = <3000000>; @@ -247,7 +247,7 @@ compatible = "elan,ekth3000"; reg = <0x15>; interrupt-parent = <&gpio7>; - interrupts = <3 IRQ_TYPE_EDGE_FALLING>; + interrupts = <RK_PA3 IRQ_TYPE_EDGE_FALLING>; pinctrl-names = "default"; pinctrl-0 = <&trackpad_int>; vcc-supply = <&vcc33_io>; diff --git a/arch/arm/boot/dts/rk3288-veyron-jaq.dts b/arch/arm/boot/dts/rk3288-veyron-jaq.dts index 3748abf562b1..d33f5763c39c 100644 --- a/arch/arm/boot/dts/rk3288-veyron-jaq.dts +++ b/arch/arm/boot/dts/rk3288-veyron-jaq.dts @@ -57,7 +57,7 @@ panel_regulator: panel-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio7 14 GPIO_ACTIVE_HIGH>; + gpio = <&gpio7 RK_PB6 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&lcd_enable_h>; regulator-name = "panel_regulator"; @@ -68,7 +68,7 @@ vcc18_lcd: vcc18-lcd { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>; + gpio = <&gpio2 RK_PB5 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&avdd_1v8_disp_en>; regulator-name = "vcc18_lcd"; @@ -80,7 +80,7 @@ backlight_regulator: backlight-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio2 12 GPIO_ACTIVE_HIGH>; + gpio = <&gpio2 RK_PB4 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&bl_pwr_en>; regulator-name = "backlight_regulator"; @@ -134,8 +134,8 @@ &rk808 { pinctrl-names = "default"; pinctrl-0 = <&pmic_int_l &dvs_1 &dvs_2>; - dvs-gpios = <&gpio7 12 GPIO_ACTIVE_HIGH>, - <&gpio7 15 GPIO_ACTIVE_HIGH>; + dvs-gpios = <&gpio7 RK_PB4 GPIO_ACTIVE_HIGH>, + <&gpio7 RK_PB7 GPIO_ACTIVE_HIGH>; regulators { mic_vcc: LDO_REG2 { @@ -160,14 +160,14 @@ &vcc_5v { enable-active-high; - gpio = <&gpio7 21 GPIO_ACTIVE_HIGH>; + gpio = <&gpio7 RK_PC5 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&drv_5v>; }; &vcc50_hdmi { enable-active-high; - gpio = <&gpio5 19 GPIO_ACTIVE_HIGH>; + gpio = <&gpio5 RK_PC3 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&vcc50_hdmi_en>; }; diff --git a/arch/arm/boot/dts/rk3288-veyron-jerry.dts b/arch/arm/boot/dts/rk3288-veyron-jerry.dts index f6b2eaaebb9a..cdea751f2a8c 100644 --- a/arch/arm/boot/dts/rk3288-veyron-jerry.dts +++ b/arch/arm/boot/dts/rk3288-veyron-jerry.dts @@ -56,7 +56,7 @@ panel_regulator: panel-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio7 14 GPIO_ACTIVE_HIGH>; + gpio = <&gpio7 RK_PB6 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&lcd_enable_h>; regulator-name = "panel_regulator"; @@ -67,7 +67,7 @@ vcc18_lcd: vcc18-lcd { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>; + gpio = <&gpio2 RK_PB5 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&avdd_1v8_disp_en>; regulator-name = "vcc18_lcd"; @@ -79,7 +79,7 @@ backlight_regulator: backlight-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio2 12 GPIO_ACTIVE_HIGH>; + gpio = <&gpio2 RK_PB4 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&bl_pwr_en>; regulator-name = "backlight_regulator"; @@ -123,14 +123,14 @@ &vcc_5v { enable-active-high; - gpio = <&gpio7 21 GPIO_ACTIVE_HIGH>; + gpio = <&gpio7 RK_PC5 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&drv_5v>; }; &vcc50_hdmi { enable-active-high; - gpio = <&gpio5 19 GPIO_ACTIVE_HIGH>; + gpio = <&gpio5 RK_PC3 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&vcc50_hdmi_en>; }; @@ -197,7 +197,7 @@ trackpad@2c { compatible = "hid-over-i2c"; interrupt-parent = <&gpio7>; - interrupts = <3 IRQ_TYPE_EDGE_FALLING>; + interrupts = <RK_PA3 IRQ_TYPE_EDGE_FALLING>; reg = <0x2c>; hid-descr-addr = <0x0020>; vcc-supply = <&vcc33_io>; diff --git a/arch/arm/boot/dts/rk3288-veyron-mickey.dts b/arch/arm/boot/dts/rk3288-veyron-mickey.dts index f36f6f459225..f0994f0e5774 100644 --- a/arch/arm/boot/dts/rk3288-veyron-mickey.dts +++ b/arch/arm/boot/dts/rk3288-veyron-mickey.dts @@ -182,8 +182,8 @@ &rk808 { pinctrl-names = "default"; pinctrl-0 = <&pmic_int_l &dvs_1 &dvs_2>; - dvs-gpios = <&gpio7 12 GPIO_ACTIVE_HIGH>, - <&gpio7 15 GPIO_ACTIVE_HIGH>; + dvs-gpios = <&gpio7 RK_PB4 GPIO_ACTIVE_HIGH>, + <&gpio7 RK_PB7 GPIO_ACTIVE_HIGH>; /delete-property/ vcc6-supply; /delete-property/ vcc12-supply; @@ -244,7 +244,7 @@ &vcc50_hdmi { enable-active-high; - gpio = <&gpio7 11 GPIO_ACTIVE_HIGH>; + gpio = <&gpio7 RK_PB3 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&power_hdmi_on>; }; diff --git a/arch/arm/boot/dts/rk3288-veyron-minnie.dts b/arch/arm/boot/dts/rk3288-veyron-minnie.dts index f72d616d1bf8..544de6027aaa 100644 --- a/arch/arm/boot/dts/rk3288-veyron-minnie.dts +++ b/arch/arm/boot/dts/rk3288-veyron-minnie.dts @@ -55,7 +55,7 @@ backlight_regulator: backlight-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio2 12 GPIO_ACTIVE_HIGH>; + gpio = <&gpio2 RK_PB4 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&bl_pwr_en>; regulator-name = "backlight_regulator"; @@ -66,7 +66,7 @@ panel_regulator: panel-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio7 14 GPIO_ACTIVE_HIGH>; + gpio = <&gpio7 RK_PB6 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&lcd_enable_h>; regulator-name = "panel_regulator"; @@ -77,7 +77,7 @@ vcc18_lcd: vcc18-lcd { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>; + gpio = <&gpio2 RK_PB5 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&avdd_1v8_disp_en>; regulator-name = "vcc18_lcd"; @@ -134,14 +134,14 @@ volum_down { label = "Volum_down"; - gpios = <&gpio5 11 GPIO_ACTIVE_LOW>; + gpios = <&gpio5 RK_PB3 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEDOWN>; debounce-interval = <100>; }; volum_up { label = "Volum_up"; - gpios = <&gpio5 10 GPIO_ACTIVE_LOW>; + gpios = <&gpio5 RK_PB2 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; debounce-interval = <100>; }; @@ -165,10 +165,10 @@ compatible = "elan,ekth3500"; reg = <0x10>; interrupt-parent = <&gpio2>; - interrupts = <14 IRQ_TYPE_EDGE_FALLING>; + interrupts = <RK_PB6 IRQ_TYPE_EDGE_FALLING>; pinctrl-names = "default"; pinctrl-0 = <&touch_int &touch_rst>; - reset-gpios = <&gpio2 15 GPIO_ACTIVE_LOW>; + reset-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_LOW>; vcc33-supply = <&vcc33_touch>; vccio-supply = <&vcc33_touch>; }; @@ -211,14 +211,14 @@ &vcc_5v { enable-active-high; - gpio = <&gpio7 21 GPIO_ACTIVE_HIGH>; + gpio = <&gpio7 RK_PC5 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&drv_5v>; }; &vcc50_hdmi { enable-active-high; - gpio = <&gpio5 19 GPIO_ACTIVE_HIGH>; + gpio = <&gpio5 RK_PC3 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&vcc50_hdmi_en>; }; diff --git a/arch/arm/boot/dts/rk3288-veyron-pinky.dts b/arch/arm/boot/dts/rk3288-veyron-pinky.dts index d44351ec2333..995cff42fa43 100644 --- a/arch/arm/boot/dts/rk3288-veyron-pinky.dts +++ b/arch/arm/boot/dts/rk3288-veyron-pinky.dts @@ -76,7 +76,7 @@ pinctrl-0 = <&pwr_key_h &ap_lid_int_l>; power { - gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>; + gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>; }; }; @@ -126,7 +126,7 @@ pinctrl-names = "default"; pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_gpio &sdmmc_wp_gpio &sdmmc_bus4>; - wp-gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>; + wp-gpios = <&gpio7 RK_PB2 GPIO_ACTIVE_HIGH>; }; &tsadc { diff --git a/arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi b/arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi index fec076eb7aef..aef07101e9ab 100644 --- a/arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi +++ b/arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi @@ -115,7 +115,7 @@ cap-mmc-highspeed; cap-sd-highspeed; card-detect-delay = <200>; - cd-gpios = <&gpio7 5 GPIO_ACTIVE_LOW>; + cd-gpios = <&gpio7 RK_PA5 GPIO_ACTIVE_LOW>; rockchip,default-sample-phase = <90>; num-slots = <1>; sd-uhs-sdr12; diff --git a/arch/arm/boot/dts/rk3288-veyron-speedy.dts b/arch/arm/boot/dts/rk3288-veyron-speedy.dts index a0d033f6fe52..cc0b78cefe34 100644 --- a/arch/arm/boot/dts/rk3288-veyron-speedy.dts +++ b/arch/arm/boot/dts/rk3288-veyron-speedy.dts @@ -57,7 +57,7 @@ panel_regulator: panel-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio7 14 GPIO_ACTIVE_HIGH>; + gpio = <&gpio7 RK_PB6 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&lcd_enable_h>; regulator-name = "panel_regulator"; @@ -68,7 +68,7 @@ vcc18_lcd: vcc18-lcd { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>; + gpio = <&gpio2 RK_PB5 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&avdd_1v8_disp_en>; regulator-name = "vcc18_lcd"; @@ -80,7 +80,7 @@ backlight_regulator: backlight-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio2 12 GPIO_ACTIVE_HIGH>; + gpio = <&gpio2 RK_PB4 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&bl_pwr_en>; regulator-name = "backlight_regulator"; @@ -126,14 +126,14 @@ &vcc_5v { enable-active-high; - gpio = <&gpio7 21 GPIO_ACTIVE_HIGH>; + gpio = <&gpio7 RK_PC5 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&drv_5v>; }; &vcc50_hdmi { enable-active-high; - gpio = <&gpio5 19 GPIO_ACTIVE_HIGH>; + gpio = <&gpio5 RK_PC3 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&vcc50_hdmi_en>; }; diff --git a/arch/arm/boot/dts/rk3288-veyron.dtsi b/arch/arm/boot/dts/rk3288-veyron.dtsi index 2251d28e9d2a..5d1eb0a25827 100644 --- a/arch/arm/boot/dts/rk3288-veyron.dtsi +++ b/arch/arm/boot/dts/rk3288-veyron.dtsi @@ -61,7 +61,7 @@ pinctrl-0 = <&pwr_key_l>; power { label = "Power"; - gpios = <&gpio0 5 GPIO_ACTIVE_LOW>; + gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; debounce-interval = <100>; wakeup-source; @@ -70,7 +70,7 @@ gpio-restart { compatible = "gpio-restart"; - gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; + gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&ap_warm_reset_h>; priority = <200>; @@ -80,7 +80,7 @@ compatible = "mmc-pwrseq-emmc"; pinctrl-0 = <&emmc_reset>; pinctrl-names = "default"; - reset-gpios = <&gpio2 9 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio2 RK_PB1 GPIO_ACTIVE_HIGH>; }; sdio_pwrseq: sdio-pwrseq { @@ -96,7 +96,7 @@ * - SDIO_RESET_L_WL_REG_ON * - PDN (power down when low) */ - reset-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>; + reset-gpios = <&gpio4 RK_PD4 GPIO_ACTIVE_LOW>; }; vcc_5v: vcc-5v { @@ -178,7 +178,7 @@ reg = <0x1b>; clock-output-names = "xin32k", "wifibt_32kin"; interrupt-parent = <&gpio0>; - interrupts = <4 IRQ_TYPE_LEVEL_LOW>; + interrupts = <RK_PA4 IRQ_TYPE_LEVEL_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pmic_int_l>; rockchip,system-power-controller; |
