summaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/imx7d-sdb.dts
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/boot/dts/imx7d-sdb.dts')
-rw-r--r--arch/arm/boot/dts/imx7d-sdb.dts93
1 files changed, 60 insertions, 33 deletions
diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts
index 0a24d1bf3c39..44637cabcc56 100644
--- a/arch/arm/boot/dts/imx7d-sdb.dts
+++ b/arch/arm/boot/dts/imx7d-sdb.dts
@@ -117,6 +117,37 @@
regulator-max-microvolt = <3300000>;
startup-delay-us = <200000>;
};
+
+ reg_lcd_3v3: regulator-lcd-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "lcd-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&extended_io 7 GPIO_ACTIVE_LOW>;
+ };
+
+ reg_can2_3v3: regulator-can2-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "can2-3v3";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan2_reg>;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio2 14 GPIO_ACTIVE_LOW>;
+ };
+
+ panel {
+ compatible = "innolux,at043tn24";
+ pinctrl-0 = <&pinctrl_backlight>;
+ enable-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
+ power-supply = <&reg_lcd_3v3>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&display_out>;
+ };
+ };
+ };
};
&adc1 {
@@ -168,6 +199,7 @@
phy-mode = "rgmii";
phy-handle = <&ethphy0>;
fsl,magic-packet;
+ phy-reset-gpios = <&extended_io 5 GPIO_ACTIVE_LOW>;
status = "okay";
mdio {
@@ -197,6 +229,13 @@
status = "okay";
};
+&flexcan2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan2>;
+ xceiver-supply = <&reg_can2_3v3>;
+ status = "okay";
+};
+
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
@@ -285,8 +324,8 @@
};
vgen6_reg: vldo4 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
regulator-always-on;
};
};
@@ -322,31 +361,11 @@
&lcdif {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lcdif>;
- display = <&display0>;
status = "okay";
- display0: display {
- bits-per-pixel = <16>;
- bus-width = <24>;
-
- display-timings {
- native-mode = <&timing0>;
-
- timing0: timing0 {
- clock-frequency = <9200000>;
- hactive = <480>;
- vactive = <272>;
- hfront-porch = <8>;
- hback-porch = <4>;
- hsync-len = <41>;
- vback-porch = <2>;
- vfront-porch = <4>;
- vsync-len = <10>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <0>;
- };
+ port {
+ display_out: endpoint {
+ remote-endpoint = <&panel_in>;
};
};
};
@@ -356,12 +375,6 @@
status = "okay";
};
-&pwm1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_pwm1>;
- status = "okay";
-};
-
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
@@ -488,6 +501,20 @@
>;
};
+ pinctrl_flexcan2: flexcan2grp {
+ fsl,pins = <
+ MX7D_PAD_GPIO1_IO14__FLEXCAN2_RX 0x59
+ MX7D_PAD_GPIO1_IO15__FLEXCAN2_TX 0x59
+ >;
+ };
+
+ pinctrl_flexcan2_reg: flexcan2reggrp {
+ fsl,pins = <
+ MX7D_PAD_EPDC_DATA14__GPIO2_IO14 0x59 /* CAN_STBY */
+ >;
+ };
+
+
pinctrl_hog: hoggrp {
fsl,pins = <
MX7D_PAD_UART3_CTS_B__GPIO4_IO7 0x14
@@ -701,9 +728,9 @@
>;
};
- pinctrl_pwm1: pwm1grp {
+ pinctrl_backlight: backlightgrp {
fsl,pins = <
- MX7D_PAD_LPSR_GPIO1_IO01__PWM1_OUT 0x110b0
+ MX7D_PAD_LPSR_GPIO1_IO01__GPIO1_IO1 0x110b0
>;
};
};
OpenPOWER on IntegriCloud