diff options
Diffstat (limited to 'Documentation')
| -rw-r--r-- | Documentation/ABI/testing/sysfs-class-mtd | 10 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/mtd/m25p80.txt | 13 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt | 2 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/mtd/sunxi-nand.txt | 2 |
4 files changed, 20 insertions, 7 deletions
diff --git a/Documentation/ABI/testing/sysfs-class-mtd b/Documentation/ABI/testing/sysfs-class-mtd index 76ee192f80a0..3b5c3bca9186 100644 --- a/Documentation/ABI/testing/sysfs-class-mtd +++ b/Documentation/ABI/testing/sysfs-class-mtd @@ -222,3 +222,13 @@ Description: The number of blocks that are marked as reserved, if any, in this partition. These are typically used to store the in-flash bad block table (BBT). + +What: /sys/class/mtd/mtdX/offset +Date: March 2015 +KernelVersion: 4.1 +Contact: linux-mtd@lists.infradead.org +Description: + For a partition, the offset of that partition from the start + of the master device in bytes. This attribute is absent on + main devices, so it can be used to distinguish between + partitions and devices that aren't partitions. diff --git a/Documentation/devicetree/bindings/mtd/m25p80.txt b/Documentation/devicetree/bindings/mtd/m25p80.txt index 4611aa83531b..f20b111b502a 100644 --- a/Documentation/devicetree/bindings/mtd/m25p80.txt +++ b/Documentation/devicetree/bindings/mtd/m25p80.txt @@ -3,10 +3,13 @@ Required properties: - #address-cells, #size-cells : Must be present if the device has sub-nodes representing partitions. -- compatible : Should be the manufacturer and the name of the chip. Bear in mind - the DT binding is not Linux-only, but in case of Linux, see the - "spi_nor_ids" table in drivers/mtd/spi-nor/spi-nor.c for the list - of supported chips. +- compatible : May include a device-specific string consisting of the + manufacturer and name of the chip. Bear in mind the DT binding + is not Linux-only, but in case of Linux, see the "m25p_ids" + table in drivers/mtd/devices/m25p80.c for the list of supported + chips. + Must also include "nor-jedec" for any SPI NOR flash that can be + identified by the JEDEC READ ID opcode (0x9F). - reg : Chip-Select number - spi-max-frequency : Maximum frequency of the SPI bus the chip can operate at @@ -22,7 +25,7 @@ Example: flash: m25p80@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "spansion,m25p80"; + compatible = "spansion,m25p80", "nor-jedec"; reg = <0>; spi-max-frequency = <40000000>; m25p,fast-read; diff --git a/Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt b/Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt index de8b517a5521..4f833e3c4f51 100644 --- a/Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt +++ b/Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt @@ -14,7 +14,7 @@ Optional properties: - marvell,nand-enable-arbiter: Set to enable the bus arbiter - marvell,nand-keep-config: Set to keep the NAND controller config as set by the bootloader - - num-cs: Number of chipselect lines to usw + - num-cs: Number of chipselect lines to use - nand-on-flash-bbt: boolean to enable on flash bbt option if not present false - nand-ecc-strength: number of bits to correct per ECC step diff --git a/Documentation/devicetree/bindings/mtd/sunxi-nand.txt b/Documentation/devicetree/bindings/mtd/sunxi-nand.txt index 0273adb8638c..086d6f44c4b9 100644 --- a/Documentation/devicetree/bindings/mtd/sunxi-nand.txt +++ b/Documentation/devicetree/bindings/mtd/sunxi-nand.txt @@ -21,7 +21,7 @@ Optional properties: - nand-ecc-mode : one of the supported ECC modes ("hw", "hw_syndrome", "soft", "soft_bch" or "none") -see Documentation/devicetree/mtd/nand.txt for generic bindings. +see Documentation/devicetree/bindings/mtd/nand.txt for generic bindings. Examples: |
