diff options
Diffstat (limited to 'Documentation/devicetree/bindings/mmc/mmc-controller.yaml')
| -rw-r--r-- | Documentation/devicetree/bindings/mmc/mmc-controller.yaml | 19 |
1 files changed, 16 insertions, 3 deletions
diff --git a/Documentation/devicetree/bindings/mmc/mmc-controller.yaml b/Documentation/devicetree/bindings/mmc/mmc-controller.yaml index 080754e0ef35..3c0df4016a12 100644 --- a/Documentation/devicetree/bindings/mmc/mmc-controller.yaml +++ b/Documentation/devicetree/bindings/mmc/mmc-controller.yaml @@ -96,11 +96,10 @@ properties: description: When set, no physical write-protect line is present. This property should only be specified when the controller has a - dedicated write-protect detection logic. If a GPIO is always - used for the write-protect detection. If a GPIO is always used + dedicated write-protect detection logic. If a GPIO is always used for the write-protect detection logic, it is sufficient to not specify the wp-gpios property in the absence of a write-protect - line. + line. Not used in combination with eMMC or SDIO. wp-gpios: description: @@ -333,6 +332,19 @@ patternProperties: required: - reg + "^clk-phase-(legacy|sd-hs|mmc-(hs|hs[24]00|ddr52)|uhs-(sdr(12|25|50|104)|ddr50))$": + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 2 + maxItems: 2 + items: + minimum: 0 + maximum: 359 + description: + Set the clock (phase) delays which are to be configured in the + controller while switching to particular speed mode. These values + are in pair of degrees. + dependencies: cd-debounce-delay-ms: [ cd-gpios ] fixed-emmc-driver-type: [ non-removable ] @@ -351,6 +363,7 @@ examples: keep-power-in-suspend; wakeup-source; mmc-pwrseq = <&sdhci0_pwrseq>; + clk-phase-sd-hs = <63>, <72>; }; - | |
